This is mh-e.info, produced by makeinfo version 6.8 from mh-e.texi.

This is version 8.6 of ‘The MH-E Manual’, last updated 2016-04-29.

   Copyright © 1995, 2001–2003, 2005–2022 Free Software Foundation, Inc.

     Permission is granted to copy, distribute and/or modify this
     document under the terms of either:

       a. the GNU Free Documentation License, Version 1.3 or any later
          version published by the Free Software Foundation; with no
          Invariant Sections, with the Front-Cover Texts being “A GNU
          Manual,” and with the Back-Cover Texts as in (a) below.  A
          copy of the license is included in the section entitled “GNU
          Free Documentation License.”

          (a) The FSF’s Back-Cover Text is: “You have the freedom to
          copy and modify this GNU manual.”

       b. the GNU General Public License as published by the Free
          Software Foundation; either version 3, or (at your option) any
          later version.  A copy of the license is included in the
          section entitled “GNU General Public License.”

INFO-DIR-SECTION Emacs network features
START-INFO-DIR-ENTRY
* MH-E: (mh-e).                 Emacs interface to the MH mail system.
END-INFO-DIR-ENTRY


File: mh-e.info,  Node: Top,  Next: Preface,  Up: (dir)

The MH-E Manual
***************

This is version 8.6 of ‘The MH-E Manual’, last updated 2016-04-29.

   Copyright © 1995, 2001–2003, 2005–2022 Free Software Foundation, Inc.

     Permission is granted to copy, distribute and/or modify this
     document under the terms of either:

       a. the GNU Free Documentation License, Version 1.3 or any later
          version published by the Free Software Foundation; with no
          Invariant Sections, with the Front-Cover Texts being “A GNU
          Manual,” and with the Back-Cover Texts as in (a) below.  A
          copy of the license is included in the section entitled “GNU
          Free Documentation License.”

          (a) The FSF’s Back-Cover Text is: “You have the freedom to
          copy and modify this GNU manual.”

       b. the GNU General Public License as published by the Free
          Software Foundation; either version 3, or (at your option) any
          later version.  A copy of the license is included in the
          section entitled “GNU General Public License.”

* Menu:

* Preface::                     Preface
* Conventions::                 GNU Emacs Terms and Conventions
* Getting Started::             Getting Started
* Tour Through MH-E::           Tour Through MH-E
* Using This Manual::           Using This Manual
* Incorporating Mail::          Incorporating Mail
* Reading Mail::                Reading Mail
* Folders::                     Organizing Your Mail with Folders
* Sending Mail::                Sending Mail
* Editing Drafts::              Editing a Draft
* Aliases::                     Aliases
* Identities::                  Identities
* Speedbar::                    The Speedbar
* Menu Bar::                    The Menu Bar
* Tool Bar::                    The Tool Bar
* Searching::                   Searching Through Messages
* Threading::                   Viewing Message Threads
* Limits::                      Limiting Display
* Sequences::                   Using Sequences
* Junk::                        Dealing With Junk Mail
* Miscellaneous::               Miscellaneous Commands, Variables, and Buffers
* Scan Line Formats::           Scan Line Formats
* Procmail::                    Reading Mailing Lists Effectively
* Odds and Ends::               Odds and Ends
* History::                     History of MH-E
* GFDL::                        GNU Free Documentation License
* GPL::                         GNU General Public License
* Key Index::                   Key (Character) Index
* Command Index::               Command Index
* Option Index::                Option (Variable) Index
* Concept Index::               Concept Index

 — The Detailed Node Listing —

Tour Through MH-E

* Sending Mail Tour::
* Reading Mail Tour::
* Processing Mail Tour::
* Leaving MH-E::
* More About MH-E::

Using This Manual

* Options::
* Ranges::
* Folder Selection::

Reading Your Mail

* Viewing::
* Viewing Attachments::
* HTML::
* Digests::
* Reading PGP::
* Printing::
* Files and Pipes::
* Navigating::
* Miscellaneous Commands and Options::

Sending Mail

* Composing::
* Replying::
* Forwarding::
* Redistributing::
* Editing Again::

Editing a Draft

* Editing Message::
* Inserting Letter::
* Inserting Messages::
* Signature::
* Picture::
* Adding Attachments::
* Sending PGP::
* Checking Recipients::
* Sending Message::
* Killing Draft::

Odds and Ends

* Bug Reports::
* Mailing Lists::
* MH FAQ and Support::
* Getting MH-E::

History of MH-E

* From Brian Reid::
* From Jim Larus::
* From Stephen Gildea::
* From Bill Wohler::



File: mh-e.info,  Node: Preface,  Next: Conventions,  Prev: Top,  Up: Top

Preface
*******

This manual introduces another interface to the MH mail system that is
accessible through the GNU Emacs editor, namely, _MH-E_. MH-E is easy to
use.  I don’t assume that you know GNU Emacs or even MH at this point,
since I didn’t know either of them when I discovered MH-E.  However,
MH-E was the tip of the iceberg, and I discovered more and more niceties
about GNU Emacs and MH.  Now I’m fully hooked on both of them.

   The MH-E package is distributed with Emacs(1), so you shouldn’t have
to do anything special to use it.  Gnus is also required; version 5.10
or higher is recommended.  This manual covers MH-E version 8.6.  To help
you decide which version you have, see *note Getting Started::.

   If you don’t already use GNU Emacs but want to learn more, you can
read a built-in tutorial by starting GNU Emacs and typing ‘C-h t’
(‘help-with-tutorial’).  (To learn about this notation, see *note
Conventions::.)  If you want to take the plunge, consult the *note GNU
Emacs Manual: (emacs)Top, from the Free Software Foundation.

   If more information is needed, you can go to the Unix manual pages of
the individual MH commands.  When the name is not obvious, I’ll guide
you to a relevant MH manual page that describes the action more fully.

   This manual is available in both Info and online formats.  The Info
version is distributed with Emacs and can be accessed with the ‘info’
command (‘info mh-e’) or within Emacs (‘C-h i m mh-e <RET>’).  The
online version is available at SourceForge
(https://mh-e.sourceforge.io/manual/).  Another great online resource is
the book ‘MH & nmh: Email for Users & Programmers’
(https://rand-mh.sourceforge.io/book/) (also known as “the MH book”).

   I hope you enjoy this manual!  If you have any comments, or
suggestions for this document, please let me know.

Bill Wohler <wohler at newt.com>
8 February 1995
24 February 2006

   ---------- Footnotes ----------

   (1) Version 8.6 of MH-E appeared in Emacs 24.4.  It is supported in
GNU Emacs 23 and higher, as well as XEmacs 21.4.22 and 21.5.31.  MH-E is
known not to work with GNU Emacs versions 20 and below, and XEmacs
version 21.5.9–21.5.16.  It is compatible with MH versions 6.8.4 and
higher, all versions of nmh, and GNU mailutils 1.0 and higher


File: mh-e.info,  Node: Conventions,  Next: Getting Started,  Prev: Preface,  Up: Top

1 GNU Emacs Terms and Conventions
*********************************

If you’re an experienced Emacs user, you can skip the following
conventions and definition of terms and go directly to the next section
(*note Getting Started::).

   In general, “functions” in this text refer to Emacs Lisp functions
that one would call from within Emacs Lisp programs (for example,
‘(mh-inc-folder)’).  On the other hand, “commands” are those things that
are run by the user, such as ‘i’ or ‘M-x mh-inc-folder’.  Programs
outside of Emacs are specifically called MH commands, shell commands, or
Unix commands.

   The conventions for key names are as follows:

‘C-x’
     Hold down the <CTRL> (Control) key and press the ‘x’ key.
‘M-x’
     Hold down the <META> or <ALT> key and press the ‘x’ key.

     Since some keyboards don’t have a <META> key, you can generate
     ‘M-x’, for example, by pressing <ESC> (Escape), _releasing it_, and
     then pressing the ‘x’ key.
‘<RET>’
     Press the <RETURN> or <ENTER> key.  This is normally used to
     complete a command.
‘<SPC>’
     Press the space bar.
‘<TAB>’
     Press the <TAB> key.
‘<DEL>’
     Press the <DELETE> key.
‘<BS>’
     Press the <BACKSPACE> key(1).

   A “prefix argument” allows you to pass an argument to any Emacs
function.  To pass an argument, type ‘C-u’ before the Emacs command or
keystroke.  Numeric arguments can be passed as well.  For example, to
insert five f’s, use ‘C-u 5 f’.  There is a default of four when using
‘C-u’, and you can use multiple prefix arguments to provide arguments of
powers of four.  To continue our example, you could insert four f’s with
‘C-u f’, 16 f’s with ‘C-u C-u f’, 64 f’s with ‘C-u C-u C-u f’, and so
on.  Numeric and valueless negative arguments can also be inserted with
the <META> key.  Examples include ‘M-5’ to specify an argument of 5, or
‘M--’ which specifies a negative argument with no particular value.


                                *NOTE*

     The prefix ‘C-u’ or ‘M-’ is not necessary in MH-E’s MH-Folder mode
     (*note Reading Mail Tour::).  In this mode, simply enter the
     numerical argument before entering the command.

   Emacs uses “variables” to hold values.  These can be changed via
calls to the function ‘setq’ in ‘~/.emacs’.

   Variables in MH-E that are normally modified by the user are called
“options” and are modified through the customize functions (such as ‘M-x
customize-option’ or ‘M-x customize-group’).  *Note (emacs)Easy
Customization::, in ‘The GNU Emacs Manual’.  *Note Options::.

   You can specify various styles for displaying text using “faces”.
MH-E provides a set of faces that you can use to personalize the look of
your MH-E buffers.  Use the command ‘M-x customize-face’ to do this.
*Note (emacs)Face Customization::, in ‘The GNU Emacs Manual’.

   Commands often offer “hooks” which enable you to extend or modify the
way a command works.  *note Hooks: (emacs)Hooks, in ‘The GNU Emacs
Manual’ for a description about “normal hooks” and “abnormal hooks”.
MH-E uses normal hooks in nearly all cases, so you can assume that we
are talking about normal hooks unless we explicitly mention that a hook
is abnormal.  We also follow the conventions described in that section:
the name of the abnormal hooks end in ‘-functions’ and all the rest of
the MH-E hooks end in ‘-hook’.  You can add hooks with either
‘customize-option’ or ‘add-hook’.

   There are several other terms that are used in Emacs that you should
know.  The “point” is where the cursor currently is.  You can save your
current place in the file by setting a “mark”.  This operation is useful
in several ways.  The mark can be later used when defining a “region”,
which is the text between the point and mark.  Many commands operate on
regions, such as those for deleting text or filling paragraphs.  A mark
can be set with ‘C-@’ (or ‘C-<SPC>’).

   The “minibuffer” is the bottom line of the Emacs window, where all
prompting and multiple-character input is directed.  You can use
“completion” to enter values such as folders.  Completion means that
Emacs fills in text for you when you type <SPC> or <TAB>.  A second
<SPC> or <TAB> will list all possibilities at that point.  *Note
Completion: (emacs)Completion.  Note that <SPC> cannot be used for
completing filenames and folders.

   The minibuffer is also where you enter Emacs function names after
typing ‘M-x’.  For example, in the preface, I mentioned that you could
obtain help with ‘C-h t’ (‘help-with-tutorial’).  What this means is
that you can get a tutorial by typing either ‘C-h t’ or ‘M-x
help-with-tutorial’.  In the latter case, you are prompted for
‘help-with-tutorial’ in the minibuffer after typing ‘M-x’.

   The ‘~’ notation in filenames represents your home directory.  This
notation is used by many shells including ‘bash’, ‘tcsh’, and ‘csh’.  It
is analogous to the environment variable ‘$HOME’.  For example,
‘~/.emacs’ can be written ‘$HOME/.emacs’ or using the absolute path as
in ‘/home/wohler/.emacs’ instead.

   In case of trouble: Emacs can be interrupted at any time with ‘C-g’.
For example, if you’ve started a command that requests that you enter
something in the minibuffer, but then you change your mind, type ‘C-g’
and you’ll be back where you started.  If you want to exit Emacs
entirely, use ‘C-x C-c’.

   ---------- Footnotes ----------

   (1) If you are using Version 20 or earlier of Emacs, you will need to
use the <DEL> key.


File: mh-e.info,  Node: Getting Started,  Next: Tour Through MH-E,  Prev: Conventions,  Up: Top

2 Getting Started
*****************

Because there are many old versions of MH-E out there, it is important
to know which version you have.  I’ll be talking about Version 8 which
is pretty close to Version 6 and Version 7.  It differs from Version 4
and Version 5 and is vastly different from Version 3.  *Note History::.

   To determine which version of MH-E that you have, enter ‘M-x
mh-version <RET>’.  Hopefully it says that you’re running Version 8.6
which is the latest version as of this printing.

   If your version is much older than this, please consider upgrading.
You can have your system administrator upgrade the system-wide version,
or you can install your own personal version.  It’s really quite easy.
*Note Getting MH-E::, for instructions for getting and installing MH-E.

   If the ‘mh-version’ command displays ‘No MH variant detected’(1),
then you need to install MH or tell MH-E where to find MH.

   If you don’t have MH on your system already, you must install a
variant of MH.  The Debian mh-e package does this for you automatically
(*note Getting MH-E::).  Most people use nmh
(https://www.nongnu.org/nmh/), but you may be interested in trying out
GNU mailutils MH (https://mailutils.org/), which supports IMAP.  Your
GNU/Linux distribution probably has packages for both of these.

   If you’ve never run MH before, you need to run ‘install-mh’ from the
shell before you continue.  This sets up your personal MH
environment(2).  If you don’t, you’ll be greeted with the error message:
‘Install MH and run install-mh before running MH-E’.  This is all you
need to know about MH to use MH-E, but the more you know about MH, the
more you can leverage its power.  See the MH book
(https://rand-mh.sourceforge.io/book//../) to learn more about MH.

   Your MH environment includes your “MH profile” which is found in the
file ‘~/.mh_profile’, or the file named in the environment variable
‘$MH’.  This file contains a number of “MH profile components”.  For
example, the ‘Path:’ MH profile component contains the path to your mail
directory, which is ‘~/Mail’ by default.

   There are several options MH-E uses to interact with your MH
installation.  The option ‘mh-variant’ specifies the variant used by
MH-E (*note Options::).  The default setting of this option is
‘Auto-detect’ which means that MH-E will automatically choose the first
of nmh, MH, or GNU mailutils MH that it finds in the directories listed
in ‘mh-path’ (which you can customize), ‘mh-sys-path’, and ‘exec-path’.
If MH-E can’t find MH at all, you may have to customize ‘mh-path’ and
add the directory in which the command ‘mhparam’ is located.  If, on the
other hand, you have both nmh and GNU mailutils MH installed (for
example) and ‘mh-variant-in-use’ was initialized to nmh but you want to
use GNU mailutils MH, then you can set ‘mh-variant’ to ‘gnu-mh’.

   When ‘mh-variant’ is changed, MH-E resets ‘mh-progs’, ‘mh-lib’,
‘mh-lib-progs’, ‘mh-flists-present-flag’, and ‘mh-variant-in-use’
accordingly.


                                *NOTE*

     Prior to version 8, it was often necessary to set some of these
     variables in ‘~/.emacs’; now it is no longer necessary and can
     actually cause problems.

   In addition to setting variables that point to MH itself, MH-E also
sets a handful of variables that point to where you keep your mail.
During initialization, the function ‘mh-find-path’ sets ‘mh-user-path’
from your ‘Path:’ MH profile component (but defaults to ‘Mail’ if one
isn’t present), ‘mh-draft-folder’ from ‘Draft-Folder:’, ‘mh-unseen-seq’
from ‘Unseen-Sequence:’, ‘mh-previous-seq’ from ‘Previous-Sequence:’,
and ‘mh-inbox’ from ‘Inbox:’ (defaults to ‘+inbox’).  The hook
‘mh-find-path-hook’ is run after these variables have been set.  This
hook can be used the change the value of these variables if you need to
run with different values between MH and MH-E.

   ---------- Footnotes ----------

   (1) In very old versions of MH-E, you may get the error message,
‘Cannot find the commands `inc' and `mhl' and the file `components'’ if
MH-E can’t find MH.  In this case, you need to update MH-E, and you may
need to install MH too.  However, newer versions of MH-E are better at
finding MH if it is on your system.

   (2) See the section Setting Up MH
(https://rand-mh.sourceforge.io/book//../overall/setup.html) in the MH
book.


File: mh-e.info,  Node: Tour Through MH-E,  Next: Using This Manual,  Prev: Getting Started,  Up: Top

3 Tour Through MH-E
*******************

This chapter introduces some of the terms you’ll need to know and then
takes you on a tour of MH-E(1). When you’re done, you’ll be able to
send, read, and file mail, which is all that a lot of people ever do.
But if you’re the curious or adventurous type, read the rest of the
manual to be able to use all the features of MH-E.  I suggest you read
this chapter first to get the big picture, and then you can read the
manual as you wish.

* Menu:

* Sending Mail Tour::
* Reading Mail Tour::
* Processing Mail Tour::
* Leaving MH-E::
* More About MH-E::

   ---------- Footnotes ----------

   (1) The keys mentioned in these chapters refer to the default key
bindings.  If you’ve changed the bindings, refer to the command
summaries at the beginning of each chapter for a mapping between default
key bindings and function names.


File: mh-e.info,  Node: Sending Mail Tour,  Next: Reading Mail Tour,  Up: Tour Through MH-E

3.1 Sending Mail
================

Let’s start our tour by sending ourselves a message which we can later
read and process.  Enter ‘M-x mh-smail’ to invoke the MH-E program to
send messages.  Your message appears in an Emacs buffer whose mode(1) is
MH-Letter.

   Enter your login name in the ‘To:’ header field.  Press the <TAB>
twice to move the cursor past the ‘Cc:’ field, since no carbon copies
are to be sent, and on to the ‘Subject:’ field.  Enter ‘Test’ or
anything else that comes to mind.

   Press <TAB> again to move the cursor to the body of the message.
Enter some text, using normal Emacs commands.  You should now have
something like this(2):







     --:--  *scratch*   All L1     (Lisp Interaction)-------------------------
     To: wohler
     cc:
     Subject: Test
     X-Mailer: MH-E 8.1; nmh 1.1; GNU Emacs 23.1
     --------
     This is a test message to get the wheels churning...#


     --:**  {draft}   All L5     (MH-Letter)----------------------------------
     Type C-c C-c to send message, C-C ? for help
   MH-E message composition window

   Note the line of dashes that separates the header and the body of the
message.  It is essential that these dashes (or a blank line) are
present or the body of your message will be considered to be part of the
header.

   There are several commands specific to MH-Letter mode(3), but at this
time we’ll only use ‘C-c C-c’ to send your message.  Type ‘C-c C-c’ now.
That’s all there is to it!

   ---------- Footnotes ----------

   (1) A “mode” changes Emacs to make it easier to edit a particular
type of text.

   (2) If you’re running Emacs under the X Window System, then you would
also see a menu bar and a tool bar.  I’ve left out the menu bar and tool
bar in all of the example screens.

   (3) You can get quick help for the commands used most often with ‘C-c
?’ or more complete help with the ‘C-h m’ (‘describe-mode’) command.


File: mh-e.info,  Node: Reading Mail Tour,  Next: Processing Mail Tour,  Prev: Sending Mail Tour,  Up: Tour Through MH-E

3.2 Receiving Mail
==================

To read the mail you’ve just sent yourself, enter ‘M-x mh-rmail’.  This
incorporates the new mail and puts the output from ‘inc’(1) (called
“scan lines” after the MH program ‘scan’(2) which prints a one-line
summary of each message) into a buffer called ‘+inbox’ whose major mode
is MH-Folder.


                                *NOTE*

     The ‘M-x mh-rmail’ command will show you only new mail, not mail
     you have already read.  If you were to run this tour again, you
     would use ‘F r’ to pull all your messages into MH-E.

   You should see the scan line for your message, and perhaps others.
Use ‘n’ or ‘p’ to move the cursor to your test message and type <RET> to
read your message.  You should see something like:

       3 t08/24 root       received fax files on Wed Aug 24 11:00:13 PDT 1
     # 4+t08/24 To:wohler  Test<<This is a test message to get the wheels

     -:%%  {+inbox/select} 4 msgs (1-4)   Bot L4     (MH-Folder Show)---------
     To: wohler
     Subject: Test
     X-Mailer: MH-E 8.1; nmh 1.1; GNU Emacs 23.1
     Date: Fri, 17 Mar 2006 10:49:11 -0800
     From: Bill Wohler <wohler@stop.mail-abuse.org>

     This is a test message to get the wheels churning...



     --:--  {show-+inbox} 4   All L1     (MH-Show)----------------------------

   After incorporating new messages

   If you typed a long message, you can view subsequent pages with <SPC>
and previous pages with <DEL>.

   ---------- Footnotes ----------

   (1) See the section Reading Mail: inc show next prev
(https://rand-mh.sourceforge.io/book//reapre.html) in the MH book.

   (2) See the section Find and Specify with scan pick Ranges Sequences
(https://rand-mh.sourceforge.io/book//faswsprs.html) in the MH book.


File: mh-e.info,  Node: Processing Mail Tour,  Next: Leaving MH-E,  Prev: Reading Mail Tour,  Up: Tour Through MH-E

3.3 Processing Mail
===================

The first thing we want to do is reply to the message that we sent
ourselves.  Ensure that the cursor is still on the same line as your
test message and type ‘r’.  You are prompted in the minibuffer with
‘Reply to whom:’.  Here MH-E is asking whether you’d like to reply to
the original sender only, to the sender and primary recipients, or to
the sender and all recipients.  You can press <TAB> to see these
choices.  If you simply press <RET>, you’ll reply only to the sender.
Press <RET> now.

   You’ll find yourself in an Emacs buffer similar to that when you were
sending the original message, like this:

     To:
     cc:
     Subject: Re: Test
     In-Reply-To: <31054.1142621351@stop.mail-abuse.org>
     References: <31054.1142621351@stop.mail-abuse.org>
     Comments: In-Reply-To Bill Wohler <wohler@stop.mail-abuse.org>
        message dated "Fri, 17 Mar 2006 10:49:11 -0800."
     X-Mailer: MH-E 8.1; nmh 1.1; GNU Emacs 23.1
     --------
     #

     --:--  {draft}  All L10     (MH-Letter)----------------------------------
     To: wohler
     Subject: Test
     X-Mailer: MH-E 8.1; nmh 1.1; GNU Emacs 23.1
     Date: Fri, 17 Mar 2006 10:49:11 -0800
     From: Bill Wohler <wohler@stop.mail-abuse.org>

     This is a test message to get the wheels churning...

     --:--  {show-+inbox} 4   All L1     (MH-Show)----------------------------
     Type C-c C-c to send message, C-c ? for help
   Composition window during reply

   By default, MH will not add you to the address list of your replies,
so if you find that the ‘To:’ header field is missing, don’t worry.  In
this case, type ‘C-c C-f C-t’ to create and go to the ‘To:’ field, where
you can type your login name again.  You can move around with the arrow
keys or with ‘C-p’ (‘previous-line’), ‘C-n’ (‘next-line’), ‘C-b’
(‘backward-char’), and ‘C-f’ (‘forward-char’) and can delete the
previous character with <BS>.  When you’re finished editing your
message, send it with ‘C-c C-c’ as before.

   You’ll often want to save messages that were sent to you in an
organized fashion.  This is done with “folders”.  You can use folders to
keep messages from your friends, or messages related to a particular
topic.  With your cursor in the MH-Folder buffer and positioned on the
message you sent to yourself, type ‘o’ to output (‘refile’ in MH
parlance) that message to a folder.  Enter ‘test’ at the ‘Destination
folder:’ prompt and type ‘y’ (or <SPC>) when MH-E asks to create the
folder ‘+test’.  Note that a ‘^’ (caret) appears next to the message
number, which means that the message has been marked for refiling but
has not yet been refiled.  We’ll talk about how the refile is actually
carried out in a moment.

   Your previous reply is now waiting in the system mailbox.  You
incorporate this mail into your MH-Folder buffer named ‘+inbox’ with the
‘i’ command.  Do this now.  After the mail is incorporated, use ‘n’ or
‘p’ to move the cursor to the new message, and read it with <RET>.
Let’s delete this message by typing ‘d’.  Note that a ‘D’ appears next
to the message number.  This means that the message is marked for
deletion but is not yet deleted.  To perform the deletion (and the
refile we did previously), use the ‘x’ command.

   If you want to send another message you can use ‘m’ instead of ‘M-x
mh-smail’.  So go ahead, send some mail to your friends!

   You can get a quick reminder about these commands by typing ‘?’.
This lists several “prefix characters”.  To list the commands available
via the prefix characters, type the prefix character followed by a ‘?’,
for example, ‘F ?’.  More complete help is available with the ‘C-h m’
(‘describe-mode’) command.


File: mh-e.info,  Node: Leaving MH-E,  Next: More About MH-E,  Prev: Processing Mail Tour,  Up: Tour Through MH-E

3.4 Leaving MH-E
================

You may now wish to exit ‘emacs’ entirely.  Use ‘C-x C-c’ to exit
‘emacs’.  If you exited without running ‘x’ in the ‘+inbox’ buffer,
Emacs will offer to save it for you.  Type ‘y’ or <SPC> to save ‘+inbox’
changes, which means to perform any refiles and deletes that you did
there.

   If you don’t want to leave Emacs, you can type ‘q’ to bury (hide) the
MH-E folder or delete it entirely with ‘C-x k’.  You can then later
recall it with ‘C-x b’ or ‘M-x mh-rmail’.

   On the other hand, if you no longer want to use MH and MH-E, you can
take your mail with you.  You can copy all of your mail into a single
file, mbox-style, by using the MH command ‘packf’.  For example, to
create a file called ‘msgbox’ with the messages in your ‘+inbox’ folder,
use ‘packf +inbox’.  The ‘packf’ command will append the messages to the
file if it already exists, so you can use ‘folders -recurse -fast’ in a
script to copy all of your messages into a single file, or using the
‘-file’ argument, a file for each folder.


File: mh-e.info,  Node: More About MH-E,  Prev: Leaving MH-E,  Up: Tour Through MH-E

3.5 More About MH-E
===================

These are the basic commands to get you going, but there are plenty
more.  If you think that MH-E is for you, read the rest of the manual to
find out how you can:

   • Print your messages (*note Printing::).
   • Edit messages and include your signature (*note Editing Drafts::).
   • Forward messages (*note Forwarding::).
   • Read digests (*note Digests::).
   • Edit bounced messages (*note Editing Again::).
   • Send multimedia messages (*note Adding Attachments::).
   • Read HTML messages (*note HTML::).
   • Use aliases and identities (see *note Aliases::, *note
     Identities::).
   • Create different views of your mail (see *note Threading::, *note
     Limits::).
   • Deal with junk mail (*note Junk::).
   • Handle signed and encrypted messages (see *note Reading PGP::,
     *note Sending PGP::).
   • Process mail that was sent with ‘shar’ or ‘uuencode’ (*note Files
     and Pipes::).
   • Use sequences conveniently (*note Sequences::).
   • Use the speedbar, tool bar, and menu bar (see *note Speedbar::, see
     *note Tool Bar::, *note Menu Bar::).
   • Show header fields in different fonts (*note Reading Mail::).
   • Find previously refiled messages (*note Searching::).
   • Place messages in a file (*note Files and Pipes::).

   Remember that you can also use MH commands when you’re not running
MH-E (and when you are!).


File: mh-e.info,  Node: Using This Manual,  Next: Incorporating Mail,  Prev: Tour Through MH-E,  Up: Top

4 Using This Manual
*******************

This chapter begins the meat of the manual which goes into more detail
about every MH-E command and option.

   There are many commands, but don’t get intimidated.  There are
command summaries at the beginning of each chapter.  In case you have or
would like to rebind the keys, the command summaries also list the
associated Emacs Lisp function.  Furthermore, even if you’re stranded on
a desert island with a laptop and are without your manuals, you can get
a summary of all these commands with GNU Emacs built-in help: use ‘C-h
m’ (‘describe-mode’) for a brief summary of commands, ‘?’ (‘mh-help’)
for an even briefer summary(1) (‘C-c ?’ in MH-Letter mode), or ‘C-h i’
to read this manual via Info.  The built-in help is quite good; try
running ‘C-h C-h’.  This brings up a list of available help topics, one
of which displays the documentation for a given key (like ‘C-h k C-n’).
Another useful help feature is to view the manual section that describes
a given key (such as ‘C-h K i’).  In addition, review *note
Conventions::, if any of the GNU Emacs conventions are strange to you.

   In addition to all of the commands, it is also possible to
reconfigure MH-E to fit the needs of even the most demanding user.  The
following chapters also describe all of the options, show the defaults,
and make recommendations for customization.

   However, when customizing your mail environment, first try to change
what you want in MH, and only change MH-E if changing MH is not
possible.  That way you will get the same behavior inside and outside
GNU Emacs.  Note that MH-E does not provide hooks for customizations
that can be done in MH; this omission is intentional.

   I hope I’ve included enough examples here to get you well on your
way.  If you want to explore Emacs Lisp further, a programming manual
does exist, (2) and you can look at the code itself for examples.  Look
in the Emacs Lisp directory on your system (such as
‘/usr/local/share/emacs/lisp/mh-e’) and find all the ‘mh-*.el’ files
there.  When calling MH-E and other Emacs Lisp functions directly from
Emacs Lisp code, you’ll need to know the correct arguments.  Use the
built-in help for this.  For example, try ‘C-h f mh-execute-commands
<RET>’.  If you write your own functions, please do not prefix your
symbols (variables and functions) with ‘mh-’.  This prefix is reserved
for the MH-E package.  To avoid conflicts with existing MH-E symbols,
use a prefix like ‘my-’ or your initials.  (Unless, of course, your
initials happen to be _mh_!)

* Menu:

* Options::
* Ranges::
* Folder Selection::

   ---------- Footnotes ----------

   (1) This help appears in a buffer called ‘*MH-E Help*’ (*note
Miscellaneous::).

   (2) *Note The GNU Emacs Lisp Reference Manual: (elisp)Top, which
should be available via the Info system.  It is also available online at
<https://www.gnu.org/software/emacs/manual/elisp.html>.


File: mh-e.info,  Node: Options,  Next: Ranges,  Up: Using This Manual

4.1 Options
===========

Many string or integer options are easy to modify using ‘M-x
customize-option’.  For example, to modify the option that controls
printing, you would run ‘M-x customize-option <RET>
mh-lpr-command-format <RET>’.  In the buffer that appears, modify the
string to the right of the variable.  For example, you may change the
‘lpr’ command with ‘nenscript -G -r -2 -i'%s'’.  Then use the ‘State’
combo box and select ‘Save for Future Sessions’.  To read more about
‘mh-lpr-command-format’, see *note Printing::.

   Options can also hold boolean values.  In Emacs Lisp, the boolean
values are ‘nil’, which means false, and ‘t’, which means true.  The
‘customize-option’ function makes it easy to change boolean values;
simply click on the toggle button in the customize buffer to switch
between ‘on’ (‘t’) and ‘off’ (‘nil’).  For example, try setting
‘mh-bury-show-buffer-flag’ to ‘off’ to keep the MH-Show buffer at the
top of the buffer stack.  Use the ‘State’ combo box and choose ‘Set for
Current Session’ to see how the option affects the show buffer.  Then
choose the ‘Erase Customization’ menu item to reset the option to the
default, which places the MH-Show buffer at the bottom of the buffer
stack.

   The text usually says to turn on an option by setting it to a
_non-‘nil’_ value, because sometimes values other than ‘on’ are
meaningful.  An example of this is the variable ‘mh-mhl-format-file’
(*note Viewing::).  Other options, such as hooks, involve a little more
Emacs Lisp programming expertise.

   You can browse all of the MH-E options with the ‘customize-group’
function.  Try entering ‘M-x customize-group <RET> mh <RET>’ to view the
top-level options as well as buttons for all of the MH-E customization
groups.  Another way to view the MH-E customization group is to use ‘M-x
mh-customize <RET>’.


File: mh-e.info,  Node: Ranges,  Next: Folder Selection,  Prev: Options,  Up: Using This Manual

4.2 Ranges
==========

Many commands that operate on individual messages, such as ‘mh-forward’
or ‘mh-refile-msg’ take a ‘RANGE’ argument.  This argument can be used
in several ways.

   If you provide the prefix argument ‘C-u’ to these commands, then you
will be prompted for the message range.  This can be any valid MH range
which can include messages, sequences (*note Sequences::), and the
abbreviations (described in the ‘mh’(1) man page):

‘<num1>-<num2>’
     Indicates all messages in the range <num1> to <num2>, inclusive.
     The range must be nonempty.
‘<num>:N’
‘<num>:+N’
‘<num>:-N’
     Up to N messages beginning with (or ending with) message num.  Num
     may be any of the predefined symbols: first, prev, cur, next or
     last.
‘first:N’
‘prev:N’
‘next:N’
‘last:N’
     The first, previous, next or last messages, if they exist.
‘all’
     All of the messages.

   For example, a range that shows all of these things is ‘1 2 3 5-10
last:5 unseen’.

   If the option ‘transient-mark-mode’ is turned on and you set a region
in the MH-Folder buffer, then the MH-E command will perform the
operation on all messages in that region.

   The ‘mh-range’ customization group contains a single option which
affects how ranges are interpreted.

‘mh-interpret-number-as-range-flag’
     On means interpret a number as a range (default: ‘on’).

   Since one of the most frequent ranges used is ‘last:N’, MH-E will
interpret input such as ‘200’ as ‘last:200’ if the
‘mh-interpret-number-as-range-flag’ option is on (which is the default).
If you need to scan just the message 200, then use the range ‘200:1’ or
‘200-200’.


File: mh-e.info,  Node: Folder Selection,  Prev: Ranges,  Up: Using This Manual

4.3 Folder Selection
====================

When you choose a folder in MH-E via a command such as ‘o’
(‘mh-refile-msg’), completion is used to enter the folder (*note
(emacs)Completion::).  In addition, MH-E has several ways of choosing a
suitable default so that the folder can often be selected with a single
<RET> key.

   The ‘mh-folder-selection’ customization group contains some options
which are used to help with this.

‘mh-default-folder-for-message-function’
     Function to select a default folder for refiling or ‘Fcc:’
     (default: ‘nil’).
‘mh-default-folder-list’
     List of addresses and folders (default: ‘nil’).
‘mh-default-folder-must-exist-flag’
     On means guessed folder name must exist to be used (default: ‘on’).
‘mh-default-folder-prefix’
     Prefix used for folder names generated from aliases (default:
     ‘""’).

   You can set the option ‘mh-default-folder-for-message-function’ to a
function that provides a default folder for the message to be refiled.
When this function is called, the current buffer contains the message
being refiled and point is at the start of the message.  This function
should return the default folder as a string with a leading ‘+’ sign.
It can also return ‘nil’ so that the last folder name is used as the
default, or an empty string to suppress the default entirely.

   Otherwise, the name of the destination folder is derived from the
sender as follows:

  1. The folder name associated with the first address found in the list
     ‘mh-default-folder-list’ is used.  Each element in this list
     contains a ‘Check Recipient’ item.  If this item is turned on, then
     the address is checked against the recipient instead of the sender.
     This is useful for mailing lists.
  2. An alias prefixed by ‘mh-default-folder-prefix’ corresponding to
     the address is used.  The prefix is used to prevent clutter in your
     mail directory.  *Note Aliases::.

   If the derived folder does not exist, and
‘mh-default-folder-must-exist-flag’ is ‘t’, then the last folder name
used is suggested.  This is useful if you get mail from various people
for whom you have an alias, but file them all in the same project
folder.


File: mh-e.info,  Node: Incorporating Mail,  Next: Reading Mail,  Prev: Using This Manual,  Up: Top

5 Incorporating Your Mail
*************************

This chapter talks about getting mail from your system mailbox into your
MH ‘+inbox’ folder.  The following command accomplishes that and is
found in the ‘Folder’ menu.

‘i’
     Incorporate new mail into a folder (‘mh-inc-folder’).

   The following options in the ‘mh-inc’ customization group are used.

‘mh-inc-prog’
     Program to incorporate mail (default: ‘"inc"’).
‘mh-inc-spool-list’
     Alternate spool files (default: ‘nil’).

   The following hook is available.

‘mh-inc-folder-hook’
     Hook run by ‘mh-inc-folder’ after incorporating mail into a folder
     (default: ‘nil’).

   If at any time you receive new mail, incorporate the new mail into
your ‘+inbox’ buffer with ‘i’ (‘mh-inc-folder’).  Note that ‘i’ will
display the ‘+inbox’ buffer, even if there isn’t any new mail.  You can
incorporate mail from any file into the current folder by specifying a
prefix argument; you’ll be prompted for the name of the file to use as
well as the destination folder (for example, ‘C-u i ~/mbox <RET> +tmp
<RET>’).

   Emacs can notify you when you have new mail by displaying ‘Mail’ in
the mode line.  To enable this behavior, and to have a clock in the mode
line as well, add the following to ‘~/.emacs’:

     (display-time)

   The name of the program that incorporates new mail is stored in
‘mh-inc-prog’; it is ‘"inc"’ by default.  This program generates a
one-line summary for each of the new messages.  Unless it is an absolute
pathname, the file is assumed to be in the ‘mh-progs’ directory (*note
Getting Started::).  You may also link a file to ‘inc’ that uses a
different format (see ‘mh-profile’(5), and sections Reading Mail: inc
show next prev (https://rand-mh.sourceforge.io/book//reapre.html) and MH
Format Strings (https://rand-mh.sourceforge.io/book//mhstr.html) in the
MH book).  You’ll then need to modify several variables appropriately
(*note Scan Line Formats::).

   You can use the ‘mh-inc-spool-list’ variable to direct MH-E to
retrieve mail from arbitrary spool files other than your system mailbox,
file it in folders other than your ‘+inbox’, and assign key bindings to
incorporate this mail.

   Suppose you are subscribed to the mh-e-devel mailing list and you use
‘procmail’ to filter this mail into ‘~/mail/mh-e’ with the following
recipe in ‘.procmailrc’:

     PATH=$PATH:/usr/bin/mh
     MAILDIR=$HOME/`mhparam Path`
     :0:
     * ^From mh-e-devel-admin@stop.mail-abuse.org
     mh-e

   In order to incorporate ‘~/mail/mh-e’ into ‘+mh-e’ with an ‘I m’
(‘mh-inc-spool-mh-e’) command, customize this option, and click on the
‘INS’ button.  Enter a ‘Spool File’ of ‘~/mail/mh-e’, a ‘Folder’ of
‘mh-e’, and a ‘Key Binding’ of ‘m’.

   You can use ‘xbuffy’ to automate the incorporation of this mail using
the Emacs 23 command ‘emacsclient’ as follows:

     box ~/mail/mh-e
         title mh-e
         origMode
         polltime 10
         headertime 0
         command emacsclient --eval '(mh-inc-spool-mh-e)'

   In XEmacs, the command ‘gnuclient’ is used in a similar fashion.

   You can set the hook ‘mh-inc-folder-hook’, which is called after new
mail is incorporated by the ‘i’ (‘mh-inc-folder’) command.  A good use
of this hook is to rescan the whole folder either after running ‘M-x
mh-rmail’ the first time or when you’ve changed the message numbers from
outside of MH-E.

     (defun my-mh-inc-folder-hook ()
       "Hook to rescan folder after incorporating mail."
       (if (buffer-modified-p)            ; if outstanding refiles and deletes,
           (mh-execute-commands))         ;   carry them out
       (mh-rescan-folder)                 ; synchronize with +inbox
       (mh-show))                         ; show the current message

     (add-hook 'mh-inc-folder-hook 'my-mh-inc-folder-hook)

     Rescan folder after incorporating new mail via mh-inc-folder-hook



File: mh-e.info,  Node: Reading Mail,  Next: Folders,  Prev: Incorporating Mail,  Up: Top

6 Reading Your Mail
*******************

The MH-E entry point for reading mail is ‘M-x mh-rmail’.  This command
incorporates your mail and creates a buffer called ‘+inbox’ in MH-Folder
mode.  The command ‘M-x mh-rmail’ shows you only new mail, not mail you
have already read(1).

   There are some commands that need to read mail, such as ‘mouse-2’
over the ‘Mail’ button that ‘display-time’ adds to the mode line.  You
can configure Emacs to have these commands use MH-E by setting the
option ‘read-mail-command’ to ‘mh-rmail’.

   The ‘+inbox’ buffer contains “scan lines”, which are one-line
summaries of each incorporated message.  You can perform most MH
commands on these messages via one- or two-letter commands in either the
MH-Folder or MH-Show buffers or by using the ‘Message’ menu.  See
‘scan’(1) for a description of the contents of the scan lines, and see
the Figure in *note Reading Mail Tour::, for an example.

‘?’
     Display cheat sheet for the MH-E commands (‘mh-help’).
‘<RET>’
     Display message (‘mh-show’).
‘, (comma)’
     Display message with all header fields (‘mh-header-display’).
‘: (colon)’
     Display message with the default preferred alternative
     (‘mh-show-preferred-alternative’).
‘; (semicolon)’
     Toggle the value of ‘mh-decode-mime-flag’
     (‘mh-toggle-mh-decode-mime-flag’).
‘<SPC>’
     Display next page in message (‘mh-page-msg’).
‘<BS>’
     Display previous page in message (‘mh-previous-page’).
‘>’
     Append message to end of file (‘mh-write-msg-to-file’).
‘|’
     Pipe message through shell command (‘mh-pipe-msg’).
‘C-d’
     Delete range, don’t move to next message
     (‘mh-delete-msg-no-motion’).
‘d’
     Delete range (‘mh-delete-msg’).
‘D ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘D <SPC>’
     Display next message in digest (‘mh-page-digest’).
‘D <BS>’
     Display previous message in digest (‘mh-page-digest-backwards’).
‘D b’
     Break up digest into separate messages (‘mh-burst-digest’).
‘g’
     Go to a message (‘mh-goto-msg’).
‘k’
     Delete messages with same subject or thread
     (‘mh-delete-subject-or-thread’).
‘K ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘K <TAB>’
     Go to the next button (‘mh-next-button’).
‘K S-<TAB>’
     Go to the previous button (‘mh-prev-button’).
‘K a’
     Save attachments (‘mh-mime-save-parts’).
‘K e’
     View attachment externally (‘mh-display-with-external-viewer’).
‘K i’
     Show attachment verbatim (‘mh-folder-inline-mime-part’).
‘K o’
     Save (output) attachment (‘mh-folder-save-mime-part’).
‘K t’
     Toggle option ‘mh-display-buttons-for-inline-parts-flag’
     (‘mh-toggle-mime-buttons’).
‘K v’
     View attachment (‘mh-folder-toggle-mime-part’).
‘M’
     Edit message (‘mh-modify’).
‘M-<’
     Display first message (‘mh-first-msg’).
‘M->’
     Display last message (‘mh-last-msg’).
‘M-n’
     Display next unread message (‘mh-next-unread-msg’).
‘M-p’
     Display previous unread message (‘mh-previous-unread-msg’).
‘n’
     Display next message (‘mh-next-undeleted-msg’).
‘p’
     Display previous message (‘mh-previous-undeleted-msg’).
‘P ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘P C’
     Toggle whether color is used in printing messages
     (‘mh-ps-print-toggle-color’).
‘P F’
     Toggle whether printing is done with faces or not
     (‘mh-ps-print-toggle-faces’).
‘P f’
     Print range to file (‘mh-ps-print-msg-file’).
‘P l’
     Print range the old fashioned way (‘mh-print-msg’).
‘P p’
     Print range (‘mh-ps-print-msg’).
‘X ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘X s’
‘X u’
     Unpack message created with ‘uudecode’ or ‘shar’ (‘mh-store-msg’).
‘mouse-2’
     Move point to mouse event and show message (‘mh-show-mouse’).

   Within the MH-Show buffer, the following command is defined.

‘<RET>’
‘mouse-1’
‘mouse-2’
     View contents of button (‘mh-press-button’).

   The following table lists options in the ‘mh-show’ customization
group that are used while reading mail.

‘mh-bury-show-buffer-flag’
     On means show buffer is buried (default: ‘on’).
‘mh-clean-message-header-flag’
     On means remove extraneous header fields (default: ‘on’).
‘mh-decode-mime-flag’
     On means attachments are handled (default: ‘on’ if the Gnus
     ‘mm-decode’ package is present).
‘mh-display-buttons-for-alternatives-flag’
     On means display buttons for all alternative attachments (default:
     ‘off’).
‘mh-display-buttons-for-inline-parts-flag’
     On means display buttons for all inline attachments (default:
     ‘off’).
‘mh-do-not-confirm-flag’
     On means non-reversible commands do not prompt for confirmation
     (default: ‘off’).
‘mh-fetch-x-image-url’
     Control fetching of ‘X-Image-URL:’ header field image (default:
     ‘Never Fetch’).
‘mh-graphical-smileys-flag’
     On means graphical smileys are displayed (default: ‘on’).
‘mh-graphical-emphasis-flag’
     On means graphical emphasis is displayed (default: ‘on’).
‘mh-highlight-citation-style’
     Style for highlighting citations (default: ‘Multicolor’).
‘mh-invisible-header-fields-default’
     List of hidden header fields (default: a checklist too long to list
     here).
‘mh-invisible-header-fields’
     Additional header fields to hide (default: ‘nil’).
‘mh-lpr-command-format’
     Command used to print (default: ‘"lpr -J '%s'"’).
‘mh-max-inline-image-height’
     Maximum inline image height if ‘Content-Disposition:’ is not
     present (default: 0).
‘mh-max-inline-image-width’
     Maximum inline image width if ‘Content-Disposition:’ is not
     present(default: 0).
‘mh-mhl-format-file’
     Specifies the format file to pass to the ‘mhl’ program (default:
     ‘Use Default mhl Format (Printing Only)’).
‘mh-mime-save-parts-default-directory’
     Default directory to use for ‘K a’.
‘mh-print-background-flag’
     On means messages should be printed in the background (default:
     ‘off’).
‘mh-show-buffer-mode-line-buffer-id’
     Format string to produce ‘mode-line-buffer-identification’ for show
     buffers (default: ‘" {show-%s} %d"’).
‘mh-show-maximum-size’
     Maximum size of message (in bytes) to display automatically
     (default: 0).
‘mh-show-use-xface-flag’
     On means display face images in MH-Show buffers (default: ‘on’).
‘mh-store-default-directory’
     Default directory for ‘X s’ (default: ‘Current’).
‘mh-summary-height’
     Number of lines in MH-Folder buffer (including the mode line)
     (default: depends on size of frame).

   The following hooks are available.

‘mh-delete-msg-hook’
     Hook run after marking each message for deletion (default: ‘nil’).
‘mh-show-hook’
     Hook run after <RET> shows a message (default: ‘nil’).
‘mh-show-mode-hook’
     Hook run upon entry to ‘mh-show-mode’ (default: ‘nil’).

   The following faces are available.

‘mh-show-cc’
     Face used to highlight ‘cc:’ header fields.
‘mh-show-date’
     Face used to highlight ‘Date:’ header fields.
‘mh-show-from’
     Face used to highlight ‘From:’ header fields.
‘mh-show-header’
     Face used to deemphasize less interesting header fields.
‘mh-show-pgg-bad’
     Bad PGG signature face.
‘mh-show-pgg-good’
     Good PGG signature face.
‘mh-show-pgg-unknown’
     Unknown or untrusted PGG signature face.
‘mh-show-signature’
     Signature face.
‘mh-show-subject’
     Face used to highlight ‘Subject:’ header fields.
‘mh-show-to’
     Face used to highlight ‘To:’ header fields.
‘mh-show-xface’
     X-Face image face.

   The functions and variables introduced here are explained in more
detail in the following sections.

* Menu:

* Viewing::
* Viewing Attachments::
* HTML::
* Digests::
* Reading PGP::
* Printing::
* Files and Pipes::
* Navigating::
* Miscellaneous Commands and Options::

   ---------- Footnotes ----------

   (1) If you want to see your old mail as well, use ‘F r’ to pull all
your messages into MH-E.  Or, give a prefix argument to ‘mh-rmail’ so it
will prompt you for folder to visit like ‘F v’ (for example, ‘C-u M-x
mh-rmail <RET> bob <RET>’).  *Note Folders::.


File: mh-e.info,  Node: Viewing,  Next: Viewing Attachments,  Up: Reading Mail

6.1 Viewing Your Mail
=====================

The command <RET> (‘mh-show’) displays the message that the cursor is on
while ‘mouse-2’ (‘mh-show-mouse’) displays the message that the mouse
cursor is on.  If the message is already displayed, it scrolls to the
beginning of the message.  Use <SPC> (‘mh-page-msg’) and <BS>
(‘mh-previous-page’) to move forwards and backwards one page at a time
through the message.  You can give either of these commands a prefix
argument that specifies the number of lines to scroll (such as ‘10
<SPC>’).  The <SPC> command will also show the next undeleted message if
it is used at the bottom of a message.  MH-E normally hides a lot of the
superfluous header fields that mailers add to a message, but if you wish
to see all of them, use the command ‘,’ (comma; ‘mh-header-display’).

   The option ‘mh-show-maximum-size’ provides an opportunity to skip
over large messages which may be slow to load.  The default value of 0
means that all message are shown regardless of size.

   A litany of options control what displayed messages look like.

   First, the appearance of the header fields can be modified by
customizing the associated face: ‘mh-show-to’, ‘mh-show-cc’,
‘mh-show-from’, ‘mh-show-date’, and ‘mh-show-subject’.  The face
‘mh-show-header’ is used to deemphasize the other, less interesting,
header fields.

   Normally messages are delivered with a handful of uninteresting
header fields.  These are hidden by turning on the option
‘mh-clean-message-header-flag’ (which it is by default).  The header
fields listed in the option ‘mh-invisible-header-fields-default’ are
hidden, although you can check off any field that you would like to see.
Header fields that you would like to hide that aren’t listed can be
added to the option ‘mh-invisible-header-fields’ with a couple of
caveats.  Regular expressions are not allowed.  Unique fields should
have a ‘:’ suffix; otherwise, the element can be used to render
invisible an entire class of fields that start with the same prefix.  If
you think a header field should be generally ignored, please update SF
#245 (https://sourceforge.net/p/mh-e/bugs/245/).

   MH-E can display the content of ‘Face:’, ‘X-Face:’, and
‘X-Image-URL:’ header fields.  If any of these fields occur in the
header of your message, the sender’s face will appear in the ‘From:’
header field.  If more than one of these fields appear, then the first
field found in the order ‘Face:’, ‘X-Face:’, and ‘X-Image-URL:’ will be
used.  The option ‘mh-show-use-xface-flag’ is used to turn this feature
on and off.  This feature will be turned on by default if your system
supports it.

   The first header field used, if present, is the Gnus-specific ‘Face:’
field(1).

   Next is the traditional ‘X-Face:’ header field(2).  MH-E renders the
foreground and background of the image using the associated attributes
of the face ‘mh-show-xface’.

   Finally, MH-E will display images referenced by the ‘X-Image-URL:’
header field if neither the ‘Face:’ nor the ‘X-Face:’ fields are
present(3).  Of the three header fields this is the most efficient in
terms of network usage since the image doesn’t need to be transmitted
with every single mail.  The option ‘mh-fetch-x-image-url’ controls the
fetching of the ‘X-Image-URL:’ header field image with the following
values:

‘Ask Before Fetching’
     You are prompted before the image is fetched.  MH-E will remember
     your reply and will either use the already fetched image the next
     time the same URL is encountered or silently skip it if you didn’t
     fetch it the first time.  This is a good setting.
‘Never Fetch’
     Images are never fetched and only displayed if they are already
     present in the cache.  This is the default.

   There isn’t a value of ‘Always Fetch’ for privacy and DOS (denial of
service) reasons.  For example, fetching a URL can tip off a spammer
that you’ve read his email (which is why you shouldn’t blindly answer
yes if you’ve set this option to ‘Ask Before Fetching’).  Someone may
also flood your network and fill your disk drive by sending a torrent of
messages, each specifying a unique URL to a very large file.

   The cache of images is found in the directory ‘.mhe-x-image-cache’
within your MH directory.  You can add your own face to the ‘From:’
field too.  *Note Picture::.

   Normally MH-E takes care of displaying messages itself (rather than
calling an MH program to do the work).  If you’d rather have ‘mhl’
display the message (within MH-E), change the option
‘mh-mhl-format-file’ from its default value of ‘Use Default mhl Format
(Printing Only)’.  You can set this option to ‘Use Default mhl Format’
to get the same output as you would get if you ran ‘mhl’ from the shell.
If you have a format file that you want MH-E to use, you can set this
option to ‘Specify an mhl Format File’ and enter the name of your format
file (‘mhl’(1) or section Using mhl
(https://rand-mh.sourceforge.io/book//shomes.html#Usisho) in the MH book
tells you how to write one).  Your format file should specify a non-zero
value for ‘overflowoffset’ to allow MH-E to parse the header.  Note that
‘mhl’ is always used for printing and forwarding; in this case, the
value of ‘mh-mhl-format-file’ is consulted if you have specified a
format file.

   If the sender of the message has cited other messages in his message,
then MH-E will highlight these citations to emphasize the sender’s
actual response.  The option ‘mh-highlight-citation-style’ can be
customized to change the highlighting style.  The ‘Multicolor’ method
uses a different color for each indentation while the ‘Monotone’ method
highlights all citations in red.  To disable highlighting of citations
entirely, choose ‘None’.

   Email addresses and URLs in the message are highlighted if the option
‘goto-address-highlight-p’ is on, which it is by default.  To view the
web page for a highlighted URL or to send a message using a highlighted
email address, use ‘mouse-2’ or ‘C-c <RET>’ (‘goto-address-at-point’).
*Note Sending Mail::, to see how to configure Emacs to send the message
using MH-E.

   It is a long standing custom to inject body language using a
cornucopia of punctuation, also known as the “smileys”.  MH-E can render
these as graphical widgets if the option ‘mh-graphical-smileys-flag’ is
turned on, which it is by default.  Smileys include patterns such as :-)
and ;-).  Similarly, a few typesetting features are indicated in ASCII
text with certain characters.  If your terminal supports it, MH-E can
render these typesetting directives naturally if the option
‘mh-graphical-emphasis-flag’ is turned on, which it is by default.  For
example, _underline_ will be underlined, *bold* will appear in bold,
/italics/ will appear in italics, and so on.  See the option
‘gnus-emphasis-alist’ for the whole list.  Both of these options are
disabled if the option ‘mh-decode-mime-flag’ is turned off.  *Note
Viewing Attachments::.

   MH-E normally renders signatures and vCards in italics so that the
body of the message stands out more.  MH-E depends on the presence of
the “signature separator” (‘"-- "’) to do this.  You can also customize
the face ‘mh-show-signature’ so the appearance of the signature block is
more to your liking.

   Two hooks can be used to control how messages are displayed.  The
first hook, ‘mh-show-mode-hook’, is called early on in the process of
the message display.  It is usually used to perform some action on the
message’s buffer.  The second hook, ‘mh-show-hook’, is the last thing
called after messages are displayed.  It’s used to affect the message’s
content, the behavior of MH-E in general, or when ‘mh-show-mode-hook’ is
too early.

   For those who like to modify their mode lines, use
‘mh-show-buffer-mode-line-buffer-id’ to modify the mode line in the
MH-Show buffers.  Place the two escape strings ‘%s’ and ‘%d’, which will
display the folder name and the message number, respectively, somewhere
in the string in that order.  The default value of ‘"{show-%s} %d"’
yields a mode line of

     -----{show-+inbox} 4      (MH-Show)--Bot--------------------------------

   ---------- Footnotes ----------

   (1) The ‘Face:’ field appeared in GNU Emacs 21 and XEmacs.  For more
information, see <https://quimby.gnus.org/circus/face/>.

   (2) The display of this field requires the ‘uncompface’ program
(ftp://ftp.cs.indiana.edu/pub/faces/compface/compface.tar.Z). Recent
versions of XEmacs have internal support for ‘X-Face:’ images.  If your
version of XEmacs does not, then you’ll need both ‘uncompface’ and the
‘x-face’ package (http://www.jpl.org/ftp/pub/elisp/).

   (3) The display of the images requires the ‘wget’ program
(https://www.gnu.org/software/wget/wget.html) to fetch the image and the
‘convert’ program from the ImageMagick suite
(https://www.imagemagick.org/script/index.php).


File: mh-e.info,  Node: Viewing Attachments,  Next: HTML,  Prev: Viewing,  Up: Reading Mail

6.2 Viewing Attachments
=======================

MH has the ability to display “MIME” (Multipurpose Internet Mail
Extensions) messages which are simply messages with additional “body
parts” or “attachments”.  You can use the MH commands ‘show’(1) or
‘mhshow’(2) from the shell to read MIME messages(3).

   MH-E can handle attachments as well if the Gnus ‘mm-decode’ package
is present.  If so, the option ‘mh-decode-mime-flag’ will be on.
Otherwise, you’ll see the MIME body parts rather than text or
attachments.  There isn’t much point in turning off the option
‘mh-decode-mime-flag’; however, you can inspect it if it appears that
the body parts are not being interpreted correctly or toggle it with the
command ‘;’ (semicolon; ‘mh-toggle-mh-decode-mime-flag’) to view the raw
message.  This option also controls the display of quoted-printable
messages and other graphical widgets.  *Note Viewing::.

   Attachments in MH-E are indicated by “buttons” like this:

     [1. image/jpeg; foo.jpg]...

   To view the contents of the button, use either ‘mouse-1’ or ‘mouse-2’
on the button or <RET> (‘mh-press-button’) when the cursor is over the
button.  This command is a toggle so if you use it again on the same
attachment, it is hidden.  If Emacs does not know how to display the
attachment, then Emacs offers to save the attachment in a file.  To move
the cursor to the next button, use the command ‘K <TAB>’
(‘mh-next-button’).  If the end of the buffer is reached then the search
wraps over to the start of the buffer.  To move the cursor to the
previous button, use the command ‘K S-<TAB>’ (‘mh-prev-button’).  If the
beginning of the buffer is reached then the search wraps over to the end
of the buffer.

   Another way to view the contents of a button is to use the command ‘K
v’ (‘mh-folder-toggle-mime-part’).  This command displays (or hides) the
attachment associated with the button under the cursor.  If the cursor
is not located over a button, then the cursor first moves to the next
button, wrapping to the beginning of the message if necessary.  This
command has the advantage over the previous commands of working from the
MH-Folder buffer.  You can also provide a numeric prefix argument (as in
‘4 K v’) to view the attachment labeled with that number.  If Emacs does
not know how to display the attachment, then Emacs offers to save the
attachment in a file.

   If Emacs does not know how to view an attachment, you could save it
into a file and then run some program to open it.  It is easier,
however, to launch the program directly from MH-E with the command ‘K e’
(‘mh-display-with-external-viewer’).  While you’ll most likely use this
to view spreadsheets and documents, it is also useful to use your
browser to view HTML attachments with higher fidelity than what Emacs
can provide.  This command displays the attachment associated with the
button under the cursor.  If the cursor is not located over a button,
then the cursor first moves to the next button, wrapping to the
beginning of the message if necessary.  You can provide a numeric prefix
argument (as in ‘4 K e’) to view the attachment labeled with that
number.  This command tries to provide a reasonable default for the
viewer by calling the Emacs function ‘mailcap-mime-info’.  This function
usually reads the file ‘/etc/mailcap’.

   Use the command ‘K o’ (‘mh-folder-save-mime-part’) to save
attachments (the mnemonic is “output”).  This command saves the
attachment associated with the button under the cursor.  If the cursor
is not located over a button, then the cursor first moves to the next
button, wrapping to the beginning of the message if necessary.  You can
also provide a numeric prefix argument (as in ‘3 K o’) to save the
attachment labeled with that number.  This command prompts you for a
filename and suggests a specific name if it is available.

   You can save all of the attachments at once with the command ‘K a’
(‘mh-mime-save-parts’).  The attachments are saved in the directory
specified by the option ‘mh-mime-save-parts-default-directory’ unless
you use a prefix argument (as in ‘C-u K a’) in which case you are
prompted for the directory.  These directories may be superseded by MH
profile components, since this function calls on ‘mhstore’ (‘mhn’) to do
the work.

   The default value for the option
‘mh-mime-save-parts-default-directory’ is ‘Prompt Always’ so that you
are always prompted for the directory in which to save the attachments.
However, if you usually use the same directory within a session, then
you can set this option to ‘Prompt the First Time’ to avoid the prompt
each time.  you can make this directory permanent by choosing
‘Directory’ and entering the directory’s name.

   The sender can request that attachments should be viewed inline so
that they do not really appear like an attachment at all to the reader.
Most of the time, this is desirable, so by default MH-E suppresses the
buttons for inline attachments.  On the other hand, you may receive code
or HTML which the sender has added to his message as inline attachments
so that you can read them in MH-E.  In this case, it is useful to see
the buttons so that you know you don’t have to cut and paste the code
into a file; you can simply save the attachment.  If you want to make
the buttons visible for inline attachments, you can use the command ‘K
t’ (‘mh-toggle-mime-buttons’) to toggle the visibility of these buttons.
You can turn on these buttons permanently by turning on the option
‘mh-display-buttons-for-inline-parts-flag’.

   MH-E cannot display all attachments inline however.  It can display
text (including HTML) and images.

   Some older mail programs do not insert the needed plumbing(4) to tell
MH-E whether to display the attachments inline or not.  If this is the
case, MH-E will display these images inline if they are smaller than the
window.  However, you might want to allow larger images to be displayed
inline.  To do this, you can change the options
‘mh-max-inline-image-width’ and ‘mh-max-inline-image-height’ from their
default value of zero to a large number.  The size of your screen is a
good choice for these numbers.

   Sometimes, a mail program will produce multiple alternatives of an
attachment in increasing degree of faithfulness to the original content.
By default, only the preferred alternative is displayed.  If the option
‘mh-display-buttons-for-alternatives-flag’ is on, then the preferred
part is shown inline and buttons are shown for each of the other
alternatives.

   Many people prefer to see the ‘text/plain’ alternative rather than
the ‘text/html’ alternative.  To do this in MH-E, customize the option
‘mm-discouraged-alternatives’, and add ‘text/html’.  The next best
alternative, if any, will be shown.

   Occasionally, though, you might want to see the preferred
alternative.  The command ‘:’ (‘mh-show-preferred-alternative’) displays
the message with the default preferred alternative.  This is as if
‘mm-discouraged-alternatives’ is set to ‘nil’.  Use the command <RET>
(‘mh-show’) to show the message normally again.

   You can view the raw contents of an attachment with the command ‘K i’
(‘mh-folder-inline-mime-part’).  This command displays (or hides) the
contents of the attachment associated with the button under the cursor
verbatim.  If the cursor is not located over a button, then the cursor
first moves to the next button, wrapping to the beginning of the message
if necessary.  You can also provide a numeric prefix argument (as in ‘4
K i’) to view the attachment labeled with that number.

   For additional information on buttons, see *note (gnus)Article
Buttons::, and *note (gnus)MIME Commands::.

   ---------- Footnotes ----------

   (1) See the section Reading Mail: inc show next prev
(https://rand-mh.sourceforge.io/book//reapre.html) in the MH book.

   (2) See the section Reading MIME Mail
(https://rand-mh.sourceforge.io/book//usimim.html#ReMIMa) in the MH
book.

   (3) You can call them directly from Emacs if you’re running the X
Window System: type ‘M-! xterm -e mhshow MESSAGE-NUMBER’.  You can leave
out the ‘xterm -e’ if you use ‘mhlist’ or ‘mhstore’.

   (4) This plumbing is the ‘Content-Disposition:’ header field.


File: mh-e.info,  Node: HTML,  Next: Digests,  Prev: Viewing Attachments,  Up: Reading Mail

6.3 HTML
========

MH-E can display messages that have been sent in HTML. The content of
the message will appear in the MH-Show buffer as you would expect if the
entire message is HTML, or there is an inline HTML body part.  However,
if there is an HTML body part that is an attachment, then you’ll see a
button like this:

     [1. text/html; foo.html]...

   To see how to read the contents of this body part, see *note Viewing
Attachments::.

   The browser that MH-E uses is determined by the option
‘mm-text-html-renderer’.  The default setting is set automatically based
upon the presence of a known browser on your system.  If you wish to use
a different browser, then set this option accordingly.  See the
documentation for the browser you use for additional information on how
to use it.  In particular, find and disable the option to render images,
as displaying remote images can tip off spammers that the email address
they have used is valid.

   If you’re confused about which ‘mm-text-html-renderer’ to use, here’s
a brief description of each, sorted by name.

‘gnus-w3m’
     The ‘gnus-w3m’ browser requires an external program.  It’s quick,
     produces pretty nice output, and it highlights links.  It renders
     ‘&ndash;’ and ‘&reg;’ okay.  It sometimes fails to wrap lines
     properly.  It always downloads remote images.
‘html2text’
     The ‘html2text’ browser requires an external program.  Some users
     have reported problems with it, such as filling the entire message
     as if it were one paragraph, or displaying chunks of raw HTML.
‘links’
     The ‘links’ browser requires an external program.  It’s quick, and
     produces nicer output than ‘lynx’ on single column mails in tables.
     However, it doesn’t show links and it doesn’t do as nice a job on
     multi-column tables as some lines wrap.  It does do a good job of
     fitting text within 80 columns.  It appears to render special
     characters using ASCII equivalents.  For example, ‘&reg;’ appears
     as (R). It does not download images.
‘lynx’
     The ‘lynx’ browser requires an external program.  It’s quick and
     produces pretty decent output but it doesn’t show links.  It
     doesn’t seem to do multi-column tables which makes output much
     cleaner.  It centers the output and wraps long lines more than
     most.  It does not always handle special characters like ‘&reg;’ or
     ‘&ndash;’.  It does not download images.
‘shr’
     This choice does not require an external program, but it does
     require that Emacs be configured at build time to use ‘libxml2’.
     It is fairly quick, it highlights links, and it supports HTML color
     declarations.  It renders ‘&ndash;’ and ‘&reg;’ okay.  It sometimes
     truncates text, particularly if the message tries to have fancy
     text layout.  By default it does not download images; this behavior
     is controlled by the options ‘mm-html-blocked-images’ and
     ‘mm-html-inhibit-images’ (*note (emacs-mime)Display
     Customization::).
‘w3m’
     The ‘w3m’ browser requires an external program.  It’s quick,
     produces pretty nice output, and it highlights links.  These can be
     clicked with ‘mouse-2’ to view the content of the link in ‘w3m’.
     The ‘w3m’ browser handles tables well and actually respects the
     table’s width parameter (which can cause text to wrap if the author
     didn’t anticipate that the page would be viewed in Emacs).  It does
     not download images by default; this behavior is controlled by the
     option ‘mm-w3m-safe-url-regexp’ (*note (emacs-mime)Display
     Customization::).
‘w3m-standalone’
     This browser is quick, but does not show links.  It handles simple
     tables but some tables get rendered much wider than the Emacs
     frame.  This browser renders ‘&ndash;’ and ‘&reg;’ okay.  It does
     not download images.

   For a couple more sources of information about
‘mm-text-html-renderer’, *Note (emacs-mime)Display Customization::, and
the documentation for the Gnus command ‘W h’ (*note (gnus)Article
Washing::).

   A useful key binding that you can add to ‘~/.emacs’ is the following
which displays an HTML link or textual URL in an external browser when
clicked with ‘S-mouse-2’.  This binding works in any buffer, including
HTML buffers.

     (global-set-key [S-mouse-2] 'browse-url-at-mouse)


File: mh-e.info,  Node: Digests,  Next: Reading PGP,  Prev: HTML,  Up: Reading Mail

6.4 Digests
===========

A digest is a message that contains other messages.  Special MH-E
commands let you read digests conveniently.  You can use <SPC> and <BS>
to page through the digest as if it were a normal message, but if you
wish to skip to the next message in the digest, use ‘D <SPC>’
(‘mh-page-digest’).  To return to a previous message, use ‘D <BS>’
(‘mh-page-digest-backwards’).

   Another handy command is ‘D b’ (‘mh-burst-digest’).  This command
uses the MH command ‘burst’(1) to break out each message in the digest
into its own message.  Using this command, you can quickly delete
unwanted messages, like this: Once the digest is split up, toggle out of
MH-Folder Show mode with ‘t’ (*note Folders::) so that the scan lines
fill the screen and messages aren’t displayed.  Then use ‘d’ (*note
Reading Mail::) to quickly delete messages that you don’t want to read
(based on the ‘Subject:’ header field).  You can also burst the digest
to reply directly to the people who posted the messages in the digest.
One problem you may encounter is that the ‘From:’ header fields are
preceded with a ‘>’ so that your reply can’t create the ‘To:’ field
correctly.  In this case, you must correct the ‘To:’ field yourself.
This is described later (*note Editing Drafts::).

   ---------- Footnotes ----------

   (1) See the section Bursting Messages
(https://rand-mh.sourceforge.io/book//burdig.html) in the MH book.


File: mh-e.info,  Node: Reading PGP,  Next: Printing,  Prev: Digests,  Up: Reading Mail

6.5 Signed and Encrypted Messages
=================================

You can read encrypted or signed PGP or GPG messages with MH-E(1). This
section assumes that you already have a good understanding of GPG and
have set up your keys appropriately.

   If someone sends you a signed message, here is what you’ll see:

     [[PGP Signed Part:Bill Wohler <wohler@stop.mail-abuse.org>]]
     This is a signed message.

     [[End of PGP Signed Part]]

   If the key for the given signature is not in your keychain, you’ll be
given the opportunity to fetch the key from a key server and verify the
key.  If the message is really large, the verification process can take
a long time.  You can press ‘C-g’ at any time to cancel(2).

   If the signature doesn’t check out, you might see something like
this:

     [[PGP Signed Part:Failed]]
     This is a signed message.
     This is garbage added after the signature was made.

     [[End of PGP Signed Part]]

   If someone sends you an encrypted message, MH-E will ask for your
passphrase to decrypt the message.  You should see something like this:

     [[PGP Encrypted Part:OK]]

     [[PGP Signed Part:Bill Wohler <wohler@stop.mail-abuse.org>]]
     This is the secret message.

     [[End of PGP Signed Part]]

     [[End of PGP Encrypted Part]]

   If there is a problem decrypting the message, the button will say:

     [[PGP Encrypted Part:Failed]]

   You can read the contents of this button using the methods described
in *note Viewing Attachments::.  If the message were corrupted, you’d
see this:

     [[PGP Encrypted Part:Failed]
     Invalid base64 data]

   If your passphrase were incorrect, you’d see something like this:

     [GNUPG:] ENC_TO CD9C88BB610BD9AD 1 0
     [GNUPG:] USERID_HINT CD9C88BB610BD9AD Bill Wohler <wohler@stop.mail-abuse.org>
     [GNUPG:] NEED_PASSPHRASE CD9C88BB610BD9AD CD9C88BB610BD9AD 1 0
     [GNUPG:] BAD_PASSPHRASE CD9C88BB610BD9AD
     gpg: encrypted with 1024-bit RSA key, ID 610BD9AD, created 1997-09-09
           "Bill Wohler <wohler@stop.mail-abuse.org>"
     gpg: public key decryption failed: bad passphrase
     [GNUPG:] BEGIN_DECRYPTION
     [GNUPG:] DECRYPTION_FAILED
     gpg: decryption failed: secret key not available
     [GNUPG:] END_DECRYPTION

     gpg exited abnormally: '2'

   The appearance of the buttons is controlled by the faces
‘mh-show-pgg-good’, ‘mh-show-pgg-bad’, and ‘mh-show-pgg-unknown’
depending on the validity of the signature.  The latter is used whether
the signature is unknown or untrusted.

   The ‘pgg’ customization group may have some settings which may
interest you.  *Note The PGG Manual: (pgg)Top.

   ---------- Footnotes ----------

   (1) This feature depends on post-5.10 versions of Gnus.  ‘MIME
Security with OpenPGP’ is documented in RFC 3156
(https://www.rfc-editor.org/rfc/rfc3156.txt).  However, MH-E can also
decrypt old-style PGP messages that are not in MIME format.

   (2) Unfortunately in the current version, the validation process
doesn’t display a message so it appears that MH-E has hung.  We hope
that this will be fixed in the future.


File: mh-e.info,  Node: Printing,  Next: Files and Pipes,  Prev: Reading PGP,  Up: Reading Mail

6.6 Printing Your Mail
======================

To print messages in MH-E, use the command ‘P p’ (‘mh-ps-print-msg’).
You can print all the messages in a range (as in ‘C-u P p 1 3 5-7 last:5
frombob <RET>’, *note Ranges::).  You can also send the output to a file
with ‘P f’ (‘mh-ps-print-msg-file’).  This command will print inline
text attachments but will not decrypt messages.  However, when a message
is displayed in an MH-Show buffer, then that buffer is used verbatim for
printing with the caveat that only text attachments, if opened inline,
are printed.  Therefore, encrypted messages can be printed by showing
and decrypting them first.  The commands ‘P p’ and ‘P f’ do not use the
options ‘mh-lpr-command-format’ or ‘mh-print-background-flag’, described
below.

   Colors are emulated on black-and-white printers with shades of gray.
This might produce illegible output, even if your screen colors only use
shades of gray.  If this is the case, try using the command ‘P C’
(‘mh-ps-print-toggle-color’) to toggle between color, no color, and a
black and white representation of the colors and see which works best.
You change this setting permanently by customizing the option
‘ps-print-color-p’.

   Another related function is the command ‘P F’
(‘mh-ps-print-toggle-faces’).  This command toggles between using faces
and not.  When faces are enabled, the printed message will look very
similar to the message in the MH-Show buffer.

   MH-E uses the ‘ps-print’ package to do the printing, so you can
customize the printing further by going to the ‘ps-print’ customization
group.

   An alternative to using the ‘ps-print’ package is the command ‘P l’
(‘mh-print-msg’) (the l is for line printer or lpr).  You can print all
the messages in a range.  The message is formatted with ‘mhl’(1) and
printed with the ‘lpr’ command.

   The command ‘P l’ uses two options.  The option
‘mh-lpr-command-format’ contains the Unix command line which performs
the actual printing.  The string can contain one escape, ‘%s’, which is
replaced by the name of the folder and the message number and is useful
for print job names.  The default setting is ‘"lpr -J '%s'"’.  I use
‘"mpage -h'%s' -b Letter -H1of -mlrtb -P"’ which produces a nice header
and adds a bit of margin so the text fits within my printer’s margins.
Normally messages are printed in the foreground.  If this is slow on
your system, you may elect to turn on the option
‘mh-print-background-flag’ to print in the background.  If you do this,
do not delete the message until it is printed or else the output may be
truncated.  These options are not used by the commands ‘P p’ or ‘P f’.

   ---------- Footnotes ----------

   (1) See the section Using mhl
(https://rand-mh.sourceforge.io/book//shomes.html#Usisho) in the MH
book.


File: mh-e.info,  Node: Files and Pipes,  Next: Navigating,  Prev: Printing,  Up: Reading Mail

6.7 Files and Pipes
===================

MH-E does offer a couple of commands that are not a part of MH.  The
first one, ‘>’ (‘mh-write-msg-to-file’), writes a message to a file.
You are prompted for the filename.  If the file already exists, the
message is appended to it.  You can also write the message to the file
without the header by specifying a prefix argument (such as ‘C-u >
/tmp/foobar <RET>’).  Subsequent writes to the same file can be made
with the command ‘!’ (‘mh-refile-or-write-again’).

   You can also pipe the message through a Unix shell command with the
command ‘|’ (‘mh-pipe-msg’).  You are prompted for the Unix command
through which you wish to run your message.  If you give a prefix
argument to this command, the message header is included in the text
passed to the command (the contrived example ‘C-u | lpr’ would be done
with the ‘l’ command instead).

   If the message is a shell archive ‘shar’ or has been run through
‘uuencode’ use ‘X s’ (‘mh-store-msg’) to extract the body of the
message.  The default directory for extraction is the current directory;
however, you have a chance to specify a different extraction directory.
The next time you use this command, the default directory is the last
directory you used.  If you would like to change the initial default
directory, customize the option ‘mh-store-default-directory’, change the
value from ‘Current’ to ‘Directory’, and then enter the name of the
directory for storing the content of these messages.

   By the way, ‘X s’ calls the Emacs Lisp function ‘mh-store-buffer’.  I
mention this because you can use it directly if you’re editing a buffer
that contains a file that has been run through ‘uuencode’ or ‘shar’.
For example, you can extract the contents of the current buffer in your
home directory by typing ‘M-x mh-store-buffer <RET> ~ <RET>’.


File: mh-e.info,  Node: Navigating,  Next: Miscellaneous Commands and Options,  Prev: Files and Pipes,  Up: Reading Mail

6.8 Navigating
==============

To move on to the next message, use the command ‘n’
(‘mh-next-undeleted-msg’); use ‘p’ (‘mh-previous-undeleted-msg’) to read
the previous message.  To move to the next unread message, use ‘M-n’
(‘mh-next-unread-msg’); use ‘M-p’ (‘mh-previous-unread-msg’) to move to
the previous unread message.  These commands can be given a prefix
argument to specify how many messages to skip (for example, ‘5 n’).  You
can also move to a specific message with ‘g’ (‘mh-goto-msg’).  You can
enter the message number either before or after typing ‘g’.  In the
latter case, Emacs prompts you.  Finally, you can go to the first or
last message with ‘M-<’ (‘mh-first-msg’) and ‘M->’ (‘mh-last-msg’)
respectively.

   You can also use the Emacs commands ‘C-p’ (‘previous-line’) and ‘C-n’
(‘next-line’) to move up and down the scan lines in the MH-Folder
window.  These commands can be used in conjunction with <RET> to look at
deleted or refiled messages.

   To mark a message for deletion, use the command ‘d’
(‘mh-delete-msg’).  A ‘D’ is placed by the message in the scan window,
and the next undeleted message is displayed.  If the previous command
had been ‘p’, then the next message displayed is the first undeleted
message previous to the message just deleted.  Use ‘n’ to force
subsequent ‘d’ commands to move forward to the next undeleted message
after deleting the message under the cursor.  You may also specify a
range (for example, ‘C-u d 1 3 5-7 last:5 frombob <RET>’, *note
Ranges::).

   The command ‘C-d’ (‘mh-delete-msg-no-motion’) marks the message (or
messages in range) for deletion but leaves the cursor at the current
message in case you wish to perform other operations on the message.

   And to delete more messages faster, you can use ‘k’
(‘mh-delete-subject-or-thread’) to delete all the messages with the same
subject as the current message.  This command puts these messages in a
sequence named ‘subject’.  You can undo this action by using ‘u’
(‘mh-undo’) with a prefix argument and then specifying the ‘subject’
sequence.  However, if the buffer is displaying a threaded view of the
folder then ‘k’ behaves like ‘T d’ (‘mh-thread-delete’).  *Note
Threading::.

   However you mark a message for deletion, the command ‘x’
(‘mh-execute-commands’) actually carries out the deletion (*note
Folders::).

   The hook ‘mh-delete-msg-hook’ is called after you mark a message for
deletion.  For example, a past maintainer of MH-E used this once when he
kept statistics on his mail usage.


File: mh-e.info,  Node: Miscellaneous Commands and Options,  Prev: Navigating,  Up: Reading Mail

6.9 Miscellaneous Commands and Options
======================================

This section contains a few more miscellaneous commands and options.

   There are times when you need to edit a message.  For example, you
may need to fix a broken Content-Type header field.  You can do this
with the command ‘M’ (‘mh-modify’).  It displays the raw message in an
editable buffer.  When you are done editing, save and kill the buffer as
you would any other.

   Commands such as ‘mh-pack-folder’ prompt to confirm whether to
process outstanding moves and deletes or not before continuing.  Turning
on the option ‘mh-do-not-confirm-flag’ means that these actions will be
performed—which is usually desired but cannot be retracted—without
question(1).

   The option ‘mh-summary-height’ controls the number of scan lines
displayed in the MH-Folder window, including the mode line.  The default
value of this option is ‘Automatic’ which means that the MH-Folder
buffer will maintain the same proportional size if the frame is resized.
If you’d prefer a fixed height, then choose the ‘Fixed Size’ option and
enter the number of lines you’d like to see.

   Normally the buffer for displaying messages is buried at the bottom
at the buffer stack.  You may wish to disable this feature by turning
off the option ‘mh-bury-show-buffer-flag’.  One advantage of not burying
the show buffer is that one can delete the show buffer more easily in an
electric buffer list because of its proximity to its associated
MH-Folder buffer.  Try running ‘M-x electric-buffer-list’ to see what I
mean.

   Before we leave this section, I’ll include a function that I use as a
front end to MH-E(2). It toggles between your working window
configuration, which may be quite involved—windows filled with source,
compilation output, man pages, and other documentation—and your MH-E
window configuration.  Like the rest of the customization described in
this section, simply add the following code to ‘~/.emacs’.

     (defvar my-mh-screen-saved nil
       "Set to non-nil when MH-E window configuration shown.")
     (defvar my-normal-screen nil "Normal window configuration.")
     (defvar my-mh-screen nil "MH-E window configuration.")

     (defun my-mh-rmail (&optional arg)
       "Toggle between MH-E and normal screen configurations.
     With non-nil or prefix argument, include mailbox as well
     when going into mail."
       (interactive "P")                 ; user callable function, P=prefix arg
       (setq my-mh-screen-saved          ; save state
             (cond
              ;; Bring up MH-E screen if arg or normal window configuration.
              ;; If arg or +inbox buffer doesn’t exist, run mh-rmail.
              ((or arg (null my-mh-screen-saved))
               (setq my-normal-screen (current-window-configuration))
               (if (or arg (null (get-buffer "+inbox")))
                   (mh-rmail)
                 (set-window-configuration my-mh-screen))
               t)                        ; set my-mh-screen-saved to ‘t’
              ;; Otherwise, save MH-E screen and restore normal screen.
              (t
               (setq my-mh-screen (current-window-configuration))
               (set-window-configuration my-normal-screen)
               nil))))                   ; set my-mh-screen-saved to nil

     (global-set-key "\C-x\r" 'my-mh-rmail)  ; call with C-x <RET>

     Starting MH-E


   If you type an argument (‘C-u’) or if ‘my-mh-screen-saved’ is ‘nil’
(meaning a non-MH-E window configuration), the current window
configuration is saved, either the ‘+inbox’ buffer is displayed or
‘mh-rmail’ is run, and the MH-E window configuration is shown.
Otherwise, the MH-E window configuration is saved and the original
configuration is displayed.

   ---------- Footnotes ----------

   (1) In previous versions of MH-E, this option suppressed the
confirmation in ‘mh-kill-folder’.  Since this kept most users from
setting this option, ‘mh-kill-folder’ was modified in version 6.0 to
always ask for confirmation subject to
‘mh-kill-folder-suppress-prompt-hook’.  *Note Folders::.

   (2) Stephen Gildea’s favorite binding is ‘(global-set-key "\C-cr"
'mh-rmail)’.


File: mh-e.info,  Node: Folders,  Next: Sending Mail,  Prev: Reading Mail,  Up: Top

7 Organizing Your Mail with Folders
***********************************

This chapter discusses the things you can do with folders within MH-E.
The commands in this chapter are also found in the ‘Folder’ and
‘Message’ menus.

‘?’
     Display cheat sheet for the MH-E commands (‘mh-help’).
‘!’
     Repeat last output command (‘mh-refile-or-write-again’).
‘c’
     Copy range to folder (‘mh-copy-msg’).
‘F ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘F '’
     Display ticked messages (‘mh-index-ticked-messages’).
‘F c’
     Delete range from the ‘unseen’ sequence (‘mh-catchup’).
‘F k’
     Remove folder (‘mh-kill-folder’).
‘F l’
     List all folders (‘mh-list-folders’).
‘F n’
     Display unseen messages (‘mh-index-new-messages’).
‘F p’
     Pack folder (‘mh-pack-folder’).
‘F q’
     Display messages in any sequence (‘mh-index-sequenced-messages’).
‘F r’
     Rescan folder (‘mh-rescan-folder’).
‘F s’
     Search your MH mail (‘mh-search’).
‘F S’
     Sort folder (‘mh-sort-folder’).
‘F u’
     Undo all refiles and deletes in the current folder
     (‘mh-undo-folder’).
‘F v’
     Visit folder (‘mh-visit-folder’).
‘o’
     Refile (output) range into folder (‘mh-refile-msg’).
‘q’
     Quit the current MH-E folder (‘mh-quit’).
‘t’
     Toggle between MH-Folder and MH-Folder Show modes
     (‘mh-toggle-showing’).
‘u’
     Undo pending deletes or refiles in range (‘mh-undo’).
‘x’
     Process outstanding delete and refile requests
     (‘mh-execute-commands’).

   The ‘mh-folder’ customization group is used to tune these commands.

‘mh-new-messages-folders’
     Folders searched for the ‘unseen’ sequence (default: ‘Inbox’).
‘mh-ticked-messages-folders’
     Folders searched for ‘mh-tick-seq’ (default: ‘t’).
‘mh-large-folder’
     The number of messages that indicates a large folder (default:
     200).
‘mh-recenter-summary-flag’
     On means to recenter the summary window (default: ‘off’).
‘mh-recursive-folders-flag’
     On means that commands which operate on folders do so recursively
     (default: ‘off’).
‘mh-sortm-args’
     Additional arguments for ‘sortm’ (default: ‘nil’).

   The following hooks are available.

‘mh-after-commands-processed-hook’
     Hook run by ‘x’ after performing outstanding refile and delete
     requests (default: ‘nil’).
‘mh-before-commands-processed-hook’
     Hook run by ‘x’ before performing outstanding refile and delete
     requests (default: ‘nil’).
‘mh-before-quit-hook’
     Hook run by q before quitting MH-E (default: ‘nil’).
‘mh-folder-mode-hook’
     Hook run by ‘mh-folder-mode’ when visiting a new folder (default:
     ‘nil’).
‘mh-kill-folder-suppress-prompt-hook’
     Abnormal hook run at the beginning of ‘mh-kill-folder’ (default:
     ‘'mh-search-p’).
‘mh-pack-folder-hook’
     Hook run by ‘mh-pack-folder’ after renumbering the messages
     (default: ‘nil’).
‘mh-quit-hook’
     Hook run by q after quitting MH-E (default: ‘nil’).
‘mh-refile-msg-hook’
     Hook run by o after marking each message for refiling (default:
     ‘nil’).

   The following faces are available for customizing the appearance of
the MH-Folder buffer.  *Note Scan Line Formats::.

‘mh-folder-address’
     Recipient face.
‘mh-folder-body’
     Body text face.
‘mh-folder-cur-msg-number’
     Current message number face.
‘mh-folder-date’
     Date face.
‘mh-folder-deleted’
     Deleted message face.
‘mh-folder-followup’
     ‘Re:’ face.
‘mh-folder-msg-number’
     Message number face.
‘mh-folder-refiled’
     Refiled message face.
‘mh-folder-sent-to-me-hint’
     Fontification hint face in messages sent directly to us.  The
     detection of messages sent to us is governed by the scan format
     ‘mh-scan-format-nmh’ and regular expression
     ‘mh-scan-sent-to-me-sender-regexp’.
‘mh-folder-scan-format’
     Sender face in messages sent directly to us.  The detection of
     messages sent to us is governed by the scan format
     ‘mh-scan-format-nmh’ and regular expression
     ‘mh-scan-sent-to-me-sender-regexp’.
‘mh-folder-subject’
     Subject face.
‘mh-folder-tick’
     Ticked message face.
‘mh-folder-to’
     ‘To:’ face.

   The hook ‘mh-folder-mode-hook’ is called when visiting a new folder
in MH-Folder mode.  This could be used to set your own key bindings, for
example:

     (defvar my-mh-init-done nil
       "Non-nil when one-time MH-E settings made.")

     (defun my-mh-folder-mode-hook ()
       "Hook to set key bindings in MH-Folder mode."
       (if (not my-mh-init-done)             ; only need to bind the keys once
           (progn
             (local-set-key "//" 'my-search-msg)
             (local-set-key "b" 'mh-burst-digest)    ; better use of ‘b’
             (setq my-mh-init-done t))))

     (add-hook 'mh-folder-mode-hook 'my-mh-folder-mode-hook)

     (defun my-search-msg ()
       "Search for a regexp in the current message."
       (interactive)                         ; user function
       (save-window-excursion
         (other-window 1)                    ; go to next window
         (isearch-forward-regexp)))          ; string search; hit return
                                             ;   when done

     Create additional key bindings via mh-folder-mode-hook


   MH-E has analogies for each of the MH ‘folder’ and ‘refile’
commands(1).  To refile a message in another folder, use the command ‘o’
(‘mh-refile-msg’) (mnemonic: “output”).  You are prompted for the folder
name (*note Folder Selection::).  Note that this command can also be
used to create folders.  If you specify a folder that does not exist,
you will be prompted to create it.  The hook ‘mh-refile-msg-hook’ is
called after a message is marked to be refiled.

   If you are refiling several messages into the same folder, you can
use the command ‘!’ (‘mh-refile-or-write-again’) to repeat the last
refile or write (for the description of ‘>’ (‘mh-write-msg-to-file’),
*note Files and Pipes::).  You can use a range in either case (for
example, ‘C-u o 1 3 5-7 last:5 frombob <RET>’, *note Ranges::).

   If you’ve deleted a message or refiled it, but changed your mind, you
can cancel the action before you’ve executed it.  Use ‘u’ (‘mh-undo’) to
undo a refile on or deletion of a single message.  You can also undo
refiles and deletes for messages that are found in a given range (*note
Ranges::).

   Alternatively, you can use ‘F u’ (‘mh-undo-folder’) to undo all
refiles and deletes in the current folder.

   If you’ve marked messages to be deleted or refiled and you want to go
ahead and delete or refile the messages, use ‘x’
(‘mh-execute-commands’).  Many MH-E commands that may affect the
numbering of the messages (such as ‘F r’ or ‘F p’) will ask if you want
to process refiles or deletes first and then either run ‘x’ for you or
undo the pending refiles and deletes.

   The command ‘x’ runs ‘mh-before-commands-processed-hook’ before the
commands are processed and ‘mh-after-commands-processed-hook’ after the
commands are processed.  Variables that are useful with the former hook
include ‘mh-delete-list’ and ‘mh-refile-list’ which can be used to see
which changes will be made to the current folder, ‘mh-current-folder’.
Variables that are useful with the latter hook include
‘mh-folders-changed’, which lists which folders were affected by deletes
and refiles.  This list will always include the current folder
‘mh-current-folder’.

   If you wish to copy a message to another folder, you can use the
command ‘c’ (‘mh-copy-msg’) (see the ‘-link’ argument to ‘refile’(1)).
Like the command ‘o’, this command prompts you for the name of the
target folder and you can specify a range (*note Ranges::).  Note that
unlike the command ‘o’, the copy takes place immediately.  The original
copy remains in the current folder.

   The command ‘t’ (‘mh-toggle-showing’) switches between MH-Folder mode
and MH-Folder Show mode(2).  MH-Folder mode turns off the associated
show buffer so that you can perform operations on the messages quickly
without reading them.  This is an excellent way to prune out your junk
mail or to refile a group of messages to another folder for later
examination.

   When you use ‘t’ to toggle from MH-Folder Show mode to MH-Folder
mode, the MH-Show buffer is hidden and the MH-Folder buffer is left
alone.  Setting ‘mh-recenter-summary-flag’ to a non-‘nil’ value causes
the toggle to display as many scan lines as possible, with the cursor at
the middle.  The effect of ‘mh-recenter-summary-flag’ is rather useful,
but it can be annoying on a slow network connection.

   When you want to read the messages that you have refiled into
folders, use the command ‘F v’ (‘mh-visit-folder’) to visit the folder.
You are prompted for the folder name.  The folder buffer will show just
unseen messages if there are any; otherwise, it will show all the
messages in the buffer as long there are fewer than ‘mh-large-folder’
messages.  If there are more, then you are prompted for a range of
messages to scan.  You can provide a prefix argument in order to specify
a range of messages to show when you visit the folder (*note Ranges::).
In this case, regions are not used to specify the range and
‘mh-large-folder’ is ignored.  Note that this command can also be used
to create folders.  If you specify a folder that does not exist, you
will be prompted to create it.

   If you forget where you’ve refiled your messages, you can find them
using ‘F s’ (‘mh-search’).  *Note Searching::.

   If you use a program such as ‘procmail’ to file your incoming mail
automatically, you can display new, unseen, messages using the command
‘F n’ (‘mh-index-new-messages’).  All messages in the ‘unseen’ sequence
from the folders in ‘mh-new-messages-folders’ are listed.  However, this
list of folders can be overridden with a prefix argument: with a prefix
argument, enter a space-separated list of folders, or nothing to search
all folders.

   If you have ticked messages (*note Sequences::), you can display them
using the command ‘F '’ (‘mh-index-ticked-messages’).  All messages in
the ‘tick’ sequence from the folders in ‘mh-ticked-messages-folders’ are
listed.  With a prefix argument, enter a space-separated list of
folders, or nothing to search all folders.

   You can display messages in any sequence with the command ‘F q’
(‘mh-index-sequenced-messages’).  All messages from the folders in
‘mh-new-messages-folders’ in the sequence you provide are listed.  With
a prefix argument, enter a space-separated list of folders at the
prompt, or nothing to search all folders.

   Set the options ‘mh-new-messages-folders’ and
‘mh-ticked-messages-folders’ to ‘Inbox’ to search the ‘+inbox’ folder or
‘All’ to search all of the top level folders.  Otherwise, list the
folders that should be searched with the ‘Choose Folders’ menu item.
See ‘mh-recursive-folders-flag’.

   Other commands you can perform on folders include: ‘F l’
(‘mh-list-folders’), to place a listing of all the folders in your mail
directory in a buffer called ‘*MH-E Folders*’ (*note Miscellaneous::);
‘F k’ (‘mh-kill-folder’), to remove a folder; ‘F S’ (‘mh-sort-folder’),
to sort the messages by date (see ‘sortm’(1) to see how to sort by other
criteria); ‘F p’ (‘mh-pack-folder’), to pack a folder, removing gaps
from the numbering sequence; and ‘F r’ (‘mh-rescan-folder’), to rescan
the folder, which is useful to grab all messages in your ‘+inbox’ after
processing your new mail for the first time.  If you don’t want to
rescan the entire folder, the commands ‘F r’ or ‘F p’ will accept a
range (*note Ranges::).

   The command ‘F p’ runs ‘mh-pack-folder-hook’ after renumbering the
messages.  A variable that is useful with this hook is
‘mh-current-folder’.

   By default, operations on folders work only one level at a time.  Set
‘mh-recursive-folders-flag’ to non-‘nil’ to operate on all folders.
This mostly means that you’ll be able to see all your folders when you
press <TAB> when prompted for a folder name.

   The hook ‘mh-kill-folder-suppress-prompt-functions’ is an abnormal
hook run at the beginning of the command ‘k’.  The hook functions are
called with no arguments and should return a non-‘nil’ value to suppress
the normal prompt when you remove a folder.  This is useful for folders
that are easily regenerated.  The default value of ‘mh-search-p’
suppresses the prompt on folders generated by searching.


                                *NOTE*

     Use this hook with care.  If there is a bug in your hook which
     returns ‘t’ on ‘+inbox’ and you press ‘k’ by accident in the
     ‘+inbox’ folder, you will not be happy.

   The option ‘mh-sortm-args’ holds extra arguments to pass on to the
command ‘sortm’(3) when a prefix argument is used with ‘F S’.  Normally
default arguments to ‘sortm’ are specified in the MH profile.  This
option may be used to provide an alternate view.  For example,
‘'(\"-nolimit\" \"-textfield\" \"subject\")’ is a useful setting.

   When you want to quit using MH-E and go back to editing, you can use
the ‘q’ (‘mh-quit’) command.  This buries the buffers of the current
MH-E folder and restores the buffers that were present when you first
ran ‘M-x mh-rmail’.  It also removes any MH-E working buffers whose name
begins with ‘ *mh-’ or ‘*MH-E ’ (*note Miscellaneous::).  You can later
restore your MH-E session by selecting the ‘+inbox’ buffer or by running
‘M-x mh-rmail’ again.

   The two hooks ‘mh-before-quit-hook’ and ‘mh-quit-hook’ are called by
‘q’.  The former one is called before the quit occurs, so you might use
it to perform any MH-E operations; you could perform some query and
abort the quit or call ‘mh-execute-commands’, for example.  The latter
is not run in an MH-E context, so you might use it to modify the window
setup.  If you find that ‘q’ buries a lot of buffers that you would
rather remove, you can use both ‘mh-before-quit-hook’ and ‘mh-quit-hook’
to accomplish that.

     (defvar my-mh-folder-buffer-to-delete nil
       "Folder buffer that is being quit.")

     (defun my-mh-before-quit-hook ()
       "Save folder buffer that is to be deleted."
       (setq my-mh-folder-buffer-to-delete (current-buffer)))

     (defun my-mh-quit-hook ()
       "Kill folder buffer rather than just bury it."
       (set-buffer my-mh-folder-buffer-to-delete)
       (if (get-buffer mh-show-buffer)
           (kill-buffer mh-show-buffer))
       (kill-buffer (current-buffer)))

     Kill MH-Folder buffer instead of burying it

   You can use dired to manipulate the folders themselves.  For example,
I renamed my ‘+out’ folder to the more common ‘+outbox’ by running dired
on my mail directory (‘M-x dired <RET> ~/Mail <RET>’), moving my cursor
to ‘out’ and using the command ‘R’ (‘dired-do-rename’).

   ---------- Footnotes ----------

   (1) See the sections Your Current Folder: folder
(https://rand-mh.sourceforge.io/book//fol.html#Youfol) and Moving and
Linking Messages: refile
(https://rand-mh.sourceforge.io/book//fol.html#Movref) in the MH book.

   (2) For you Emacs wizards, this is implemented as an Emacs minor
mode.

   (3) See the section Sorting Messages: sortm
(https://rand-mh.sourceforge.io/book//sorsor.html) in the MH book.


File: mh-e.info,  Node: Sending Mail,  Next: Editing Drafts,  Prev: Folders,  Up: Top

8 Sending Mail
**************

You can send a mail message in several ways.  You can call ‘M-x
mh-smail’ directly, or from the command line like this:

     $ emacs -f mh-smail

   There are some commands that need to send a mail message, such as
‘goto-address-at-point’.  You can configure Emacs to have these commands
use MH-E by setting the option ‘mail-user-agent’ to ‘Emacs interface to
MH’.

   From within MH-E’s MH-Folder mode, other methods of sending mail are
available as well.  These can also be found in the ‘Message’ menu.

‘e’
     Edit a message to send it again (‘mh-edit-again’).
‘E’
     Edit a message that was returned by the mail system
     (‘mh-extract-rejected-mail’).
‘f’
     Forward message (‘mh-forward’).
‘r’
     Reply to a message (‘mh-reply’).
‘s’
     Compose a message (‘mh-send’).
‘M-d’
     Redistribute a message (‘mh-redistribute’).
‘M-x mh-smail’
     Compose a message with the MH mail system.
‘M-x mh-smail-other-window’
     Compose a message with the MH mail system in other window.

   In addition, several options from the ‘mh-sending-mail’ customization
group are useful when sending mail or replying to mail.  They are
summarized in the following table.

‘mh-compose-forward-as-mime-flag’
     On means that messages are forwarded as attachments (default:
     ‘on’).
‘mh-compose-letter-function’
     Hook run when starting a new draft (default: ‘nil’).
‘mh-compose-prompt-flag’
     On means prompt for header fields when composing a new draft
     (default: ‘off’).
‘mh-forward-subject-format’
     Format string for forwarded message subject (default: ‘"%s: %s"’).
‘mh-insert-x-mailer-flag’
     On means append an ‘X-Mailer:’ header field to the header (default:
     ‘on’).
‘mh-redist-full-contents-flag’
     On means the ‘dist’ command needs entire letter for redistribution
     (default: ‘off’).
‘mh-reply-default-reply-to’
     Sets the person or persons to whom a reply will be sent (default:
     ‘Prompt’).
‘mh-reply-show-message-flag’
     On means the MH-Show buffer is displayed using ‘r’ (‘mh-reply’)
     (default: ‘on’).

   The following hooks are available.

‘mh-annotate-msg-hook’
     Hook run by ‘mh-annotate-msg’ after annotation (default: ‘nil’).
‘mh-forward-hook’
     Hook run by ‘mh-forward’ on a forwarded letter (default: ‘nil’).
‘mh-letter-mode-hook’
     Hook run by ‘mh-letter-mode’ on a new letter (default: ‘nil’).

   A hook that is called whenever a message is sent and after the scan
lines and message are annotated is ‘mh-annotate-msg-hook’.  Hook
functions can access the current folder name with ‘mh-current-folder’
and obtain the message numbers of the annotated messages with
‘mh-annotate-list’.

   The rest of the functions and options introduced here are explained
in more detail in the following sections.

* Menu:

* Composing::
* Replying::
* Forwarding::
* Redistributing::
* Editing Again::


File: mh-e.info,  Node: Composing,  Next: Replying,  Up: Sending Mail

8.1 Composing
=============

Outside of an MH-Folder buffer, you must call either ‘M-x mh-smail’ or
‘M-x mh-smail-other-window’ to compose a new message.  The former
command always creates a two-window layout with the current buffer on
top and the draft on the bottom.  Use the latter command if you would
rather preserve the window layout.  You may find adding the following
key bindings to ‘~/.emacs’ useful:

     (global-set-key "\C-xm" 'mh-smail)
     (global-set-key "\C-x4m" 'mh-smail-other-window)

   From within a MH-Folder buffer, you can simply use the command ‘m’
(‘mh-send’).  However you invoke ‘mh-send’, your letter appears in an
Emacs buffer whose mode is MH-Letter (to see what the buffer looks like,
*note Sending Mail Tour::).  MH-Letter mode allows you to edit your
message, to check the validity of the recipients, to insert attachments
and other messages into your message, and to send the message.  We’ll go
more into depth about editing a “draft”(1) (a message you’re composing)
in just a moment (*note Editing Drafts::).

   If you prefer to be prompted for the recipient and subject fields
before the MH-Letter buffer appears, turn on the option
‘mh-compose-prompt-flag’.

   MH-E adds an ‘X-Mailer:’ header field to the header that includes the
version of MH-E and Emacs that you are using.  If you don’t want to
participate in our marketing, you can turn off the option
‘mh-insert-x-mailer-flag’.

   Two hooks are provided to run commands on your freshly created draft.
The first hook, ‘mh-letter-mode-hook’, allows you to do some processing
before editing a letter(2).  For example, you may wish to modify the
header after ‘repl’ has done its work, or you may have a complicated
‘components’ file and need to tell MH-E where the cursor should go.
Here’s an example of how you would use this hook.

     (defvar letter-mode-init-done-flag nil
       "Non-nil means one-time MH-E settings have been made.")

     (defun my-mh-letter-mode-hook ()
       "Prepare letter for editing."
       (when (not letter-mode-init-done)     ; only need to bind the keys once
         (local-set-key "\C-ctb" 'add-enriched-text)
         (local-set-key "\C-cti" 'add-enriched-text)
         (local-set-key "\C-ctf" 'add-enriched-text)
         (local-set-key "\C-cts" 'add-enriched-text)
         (local-set-key "\C-ctB" 'add-enriched-text)
         (local-set-key "\C-ctu" 'add-enriched-text)
         (local-set-key "\C-ctc" 'add-enriched-text)
         (setq letter-mode-init-done t))
       (save-excursion
         (goto-char (point-max))             ; go to end of message to
         (mh-insert-signature)))             ;   insert signature

     Prepare draft for editing via mh-letter-mode-hook


   The function, ‘add-enriched-text’ is defined in the example in *note
Adding Attachments::.

   The second hook, a function really, is ‘mh-compose-letter-function’.
Like ‘mh-letter-mode-hook’, it is called just before editing a new
message; however, it is the last function called before you edit your
message.  The consequence of this is that you can write a function to
write and send the message for you.  This function is passed three
arguments: the contents of the ‘To:’, ‘Subject:’, and ‘Cc:’ header
fields.

   ---------- Footnotes ----------

   (1) I highly recommend that you use a “draft folder” so that you can
edit several drafts in parallel.  To do so, create a folder named
‘+drafts’ for example, and add the profile component ‘Draft-Folder:
drafts’ (see ‘mh-profile’(5)).

   (2) Actually, because MH-Letter mode inherits from Mail mode, the
hooks ‘text-mode-hook’ and ‘mail-mode-hook’ are run (in that order)
before ‘mh-letter-mode-hook’.


File: mh-e.info,  Node: Replying,  Next: Forwarding,  Prev: Composing,  Up: Sending Mail

8.2 Replying to Mail
====================

To compose a reply to a message, use the ‘r’ (‘mh-reply’) command.

   When you reply to a message, you are first prompted with ‘Reply to
whom?’.  You have several choices here.

     Response       Reply Goes To
     ‘from’         The person who sent the message.  This is the default,
                    so <RET> is sufficient.
     ‘to’           Replies to the sender, plus all recipients in the ‘To:’
                    header field.
     ‘cc’           Forms a reply to the addresses in the
     ‘all’          ‘Mail-Followup-To:’ header field if one exists;
                    otherwise forms a reply to the sender, plus all
                    recipients.

   Depending on your answer, ‘repl’(1) is given a different argument to
form your reply.  Specifically, a choice of ‘from’ or none at all runs
‘repl -nocc all’, and a choice of ‘to’ runs ‘repl -cc to’.  Finally,
either ‘cc’ or ‘all’ runs ‘repl -cc all -nocc me’.  If you find that
most of the time you specify one of these choices when you reply to a
message, you can change the option ‘mh-reply-default-reply-to’ from its
default value of ‘Prompt’ to one of the choices listed above.  You can
always edit the recipients in the draft.

   Two windows are then created.  One window contains the message to
which you are replying in an MH-Show buffer.  Your draft, in MH-Letter
mode (*note Editing Drafts::), is in the other window.  If the reply
draft was not one that you expected, check the things that affect the
behavior of ‘repl’ which include the ‘repl:’ profile component and the
‘replcomps’ and ‘replgroupcomps’ files.

   If you supply a prefix argument (as in ‘C-u r’), the message you are
replying to is inserted in your reply after having first been run
through ‘mhl’ with the format file ‘mhl.reply’.  See ‘mhl’(1) or the
section Using mhl
(https://rand-mh.sourceforge.io/book//shomes.html#Usisho) in the MH book
to see how you can modify the default ‘mhl.reply’ file.

   Alternatively, you can customize the option ‘mh-yank-behavior’ and
choose one of its ‘Automatically’ variants to do the same thing.  *Note
Inserting Letter::.  If you do so, the prefix argument has no effect.

   Another way to include the message automatically in your draft is to
use ‘repl: -filter repl.filter’ in your MH profile.

   If you include the message automatically, you can hide the MH-Show
buffer by turning off the option ‘mh-reply-show-message-flag’.

   If you wish to customize the header or other parts of the reply
draft, please see ‘repl’(1) and ‘mh-format’(5).

   ---------- Footnotes ----------

   (1) See the section Replying to Messages: repl
(https://rand-mh.sourceforge.io/book//reprep.html) in the MH book.


File: mh-e.info,  Node: Forwarding,  Next: Redistributing,  Prev: Replying,  Up: Sending Mail

8.3 Forwarding Mail
===================

To forward a message, use the ‘f’ (‘mh-forward’) command.  You are
prompted for the ‘To:’ and ‘cc:’ recipients.  You are given a draft to
edit that looks like it would if you had run the MH command ‘forw’(1).
You can then add some text (*note Editing Drafts::).  You can forward
several messages by using a range (*note Ranges::).  All of the messages
in the range are inserted into your draft.  The hook ‘mh-forward-hook’
is called on the draft.

   By default, the option ‘mh-compose-forward-as-mime-flag’ is on which
means that the forwarded messages are included as attachments.  These
are inline attachments so the forwarded message should appear in the
body of your recipient’s mail program.  If you would prefer to forward
your messages verbatim (as text, inline), then turn off this option.
Forwarding messages verbatim works well for short, textual messages, but
your recipient won’t be able to view any non-textual attachments that
were in the forwarded message.  Be aware that if you have ‘forw: -mime’
in your MH profile, then forwarded messages will always be included as
attachments regardless of the settings of
‘mh-compose-forward-as-mime-flag’.

   The format of the ‘Subject:’ header field for forwarded messages is
controlled by the option ‘mh-forward-subject-format’.  This option is a
string which includes two escapes (‘%s’).  The first ‘%s’ is replaced
with the sender of the original message, and the second one is replaced
with the original ‘Subject:’.  The default value of ‘"%s: %s"’ takes a
message with the header:

     To: Bill Wohler <wohler@stop.mail-abuse.org>
     Subject: Re: 49er football
     From: Greg DesBrisay <gd@stop.mail-abuse.org>

   and creates a subject header field of:

     Subject: Greg DesBrisay: Re: 49er football

   ---------- Footnotes ----------

   (1) See the section Forwarding Messages: forw
(https://rand-mh.sourceforge.io/book//forfor.html) in the MH book.


File: mh-e.info,  Node: Redistributing,  Next: Editing Again,  Prev: Forwarding,  Up: Sending Mail

8.4 Redistributing Your Mail
============================

The command ‘M-d’ (‘mh-redistribute’) is similar in function to
forwarding mail, but it does not allow you to edit the message, nor does
it add your name to the ‘From:’ header field.  It appears to the
recipient as if the message had come from the original sender.  When you
run this command, you are prompted for the recipients.

   For more information on redistributing messages, see ‘dist’(1).  Also
investigate the command ‘e’ (‘mh-edit-again’) for another way to
redistribute messages (*note Editing Again::).

   The option ‘mh-redist-full-contents-flag’ must be turned on if
‘dist’(1) requires the whole letter for redistribution, which is the
case if ‘send’(2) is compiled with the BERK option (which many people
abhor).  If you find that MH will not allow you to redistribute a
message that has been redistributed before, turn off this option.

   The hook ‘mh-annotate-msg-hook’ is run after annotating the message
and scan line (*note Sending Mail::).

   ---------- Footnotes ----------

   (1) See the section Distributing Messages with dist
(https://rand-mh.sourceforge.io/book//disdis.html) in the MH book.

   (2) See the section Sending Some Mail: comp send
(https://rand-mh.sourceforge.io/book//sensen.html) in the MH book.


File: mh-e.info,  Node: Editing Again,  Prev: Redistributing,  Up: Sending Mail

8.5 Editing Old Drafts and Bounced Messages
===========================================

If you don’t complete a draft for one reason or another, and if the
draft buffer is no longer available, you can pick your draft up again
with ‘e’ (‘mh-edit-again’).  If you don’t use a draft folder, your last
‘draft’ file will be used.  If you use draft folders, you’ll need to
visit the draft folder with ‘F v drafts <RET>’, use ‘n’ to move to the
appropriate message, and then use ‘e’ to prepare the message for
editing.

   The ‘e’ command can also be used to take messages that were sent to
you and to send them to more people.

   Don’t use ‘e’ to re-edit a message from a Mailer-Daemon who
complained that your mail wasn’t posted for some reason or another.  In
this case, use ‘E’ (‘mh-extract-rejected-mail’) to prepare the message
for editing by removing the Mailer-Daemon envelope and unneeded header
fields.  Fix whatever addressing problem you had, and send the message
again with ‘C-c C-c’.


File: mh-e.info,  Node: Editing Drafts,  Next: Aliases,  Prev: Sending Mail,  Up: Top

9 Editing a Draft
*****************

When you edit a message that you want to send (called a “draft” in this
case), the mode used is MH-Letter.  This mode provides several commands
in addition to the normal Emacs editing commands to help you edit your
draft.  These can also be found in the ‘Letter’ menu.

‘<SPC>’
     Perform completion or insert space (‘mh-letter-complete-or-space’).
‘M-<TAB>’
     Perform completion on header field or word preceding point
     (‘mh-letter-complete’).
‘, (comma)’
     Flash alias expansion (‘mh-letter-confirm-address’).
‘<TAB>’
     Cycle to next field (‘mh-letter-next-header-field-or-indent’).
‘S-<TAB>’
     Cycle to the previous header field
     (‘mh-letter-previous-header-field’).
‘C-c ?’
     Display cheat sheet for the MH-E commands (‘mh-help’).
‘C-c C-c’
     Save draft and send message (‘mh-send-letter’).
‘C-c C-d’
     Insert fields specified by the given identity
     (‘mh-insert-identity’).  *Note Identities::.
‘C-c C-e’
     Compose MIME message from MH-style directives (‘mh-mh-to-mime’).
‘C-c C-f C-a’
‘C-c C-f a’
     Move to ‘Mail-Reply-To:’ header field (‘mh-to-field’).
‘C-c C-f C-b’
‘C-c C-f b’
     Move to ‘Bcc:’ header field (‘mh-to-field’).
‘C-c C-f C-c’
‘C-c C-f c’
     Move to ‘Cc:’ header field (‘mh-to-field’).
‘C-c C-f C-d’
‘C-c C-f d’
     Move to ‘Dcc:’ header field (‘mh-to-field’).
‘C-c C-f C-f’
‘C-c C-f f’
     Move to ‘Fcc:’ header field (‘mh-to-fcc’).
‘C-c C-f C-l’
‘C-c C-f l’
     Move to ‘Mail-Followup-To:’ header field (‘mh-to-field’).
‘C-c C-f C-m’
‘C-c C-f m’
     Move to ‘From:’ header field (‘mh-to-field’).
‘C-c C-f C-r’
‘C-c C-f r’
     Move to ‘Reply-To:’ header field (‘mh-to-field’).
‘C-c C-f C-s’
‘C-c C-f s’
     Move to ‘Subject:’ header field (‘mh-to-field’).
‘C-c C-f C-t’
‘C-c C-f t’
     Move to ‘To:’ header field (‘mh-to-field’).
‘C-c C-i’
     Insert a message (‘mh-insert-letter’).
‘C-c C-m C-e’
     Add tag to encrypt the message (‘mh-mml-secure-message-encrypt’).
‘C-c C-m C-f’
‘C-c C-m f’
     Add tag to forward a message (‘mh-compose-forward’).
‘C-c C-m C-g’
‘C-c C-m g’
     Add tag to include anonymous ftp reference to a file
     (‘mh-mh-compose-anon-ftp’).
‘C-c C-m C-i’
‘C-c C-m i’
     Add tag to include a file such as an image or sound
     (‘mh-compose-insertion’).
‘C-c C-m C-m’
‘C-c C-m m’
     Compose MIME message from MML tags (‘mh-mml-to-mime’).
‘C-c C-m C-n’
‘C-c C-m n’
     Remove any secure message tags (‘mh-mml-unsecure-message’).
‘C-c C-m C-s’
     Add tag to sign the message (‘mh-mml-secure-message-sign’).
‘C-c C-m C-t’
‘C-c C-m t’
     Add tag to include anonymous ftp reference to a compressed tar file
     (‘mh-mh-compose-external-compressed-tar’).
‘C-c C-m C-u’
‘C-c C-m u’
     Undo effects of ‘C-c C-e’ (‘mh-mh-to-mime-undo’).
‘C-c C-m C-x’
‘C-c C-m x’
     Add tag to refer to a remote file (‘mh-mh-compose-external-type’).
‘C-c C-m e e’
     Add tag to encrypt the message (‘mh-mml-secure-message-encrypt’).
‘C-c C-m e s’
     Add tag to encrypt and sign the message
     (‘mh-mml-secure-message-signencrypt’).
‘C-c C-m s e’
     Add tag to encrypt and sign the message
     (‘mh-mml-secure-message-signencrypt’).
‘C-c C-m s s’
     Add tag to sign the message (‘mh-mml-secure-message-sign’).
‘C-c C-o’
     Insert a newline and leave point before it (‘mh-open-line’).
‘C-c C-q’
     Quit editing and delete draft message (‘mh-fully-kill-draft’).
‘C-c C-s’
     Insert signature in message (‘mh-insert-signature’).
‘C-c C-t’
     Toggle display of header field at point
     (‘mh-letter-toggle-header-field-display’).
‘C-c C-w’
     Verify recipients, showing expansion of any aliases
     (‘mh-check-whom’).
‘C-c C-y’
     Insert the current message into the draft buffer
     (‘mh-yank-cur-msg’).
‘C-c M-d’
     Insert custom fields if recipient is found in ‘mh-auto-fields-list’
     (‘mh-insert-auto-fields’).  *Note Identities::.

   Several options from the ‘mh-letter’ customization group are used
while editing a draft.

‘mh-compose-insertion’
     Type of MIME message tags in messages (default: ‘MML’ if available;
     otherwise ‘MH’).
‘mh-compose-skipped-header-fields’
     List of header fields to skip over when navigating in draft
     (default: ‘'("From"’ ‘"Organization"’ ‘"References"’
     ‘"In-Reply-To"’ ‘"X-Face"’ ‘"Face"’ ‘"X-Image-URL"’ ‘"X-Mailer")’.
‘mh-compose-space-does-completion-flag’
     On means <SPC> does completion in message header (default: ‘off’).
‘mh-delete-yanked-msg-window-flag’
     On means delete any window displaying the message (default: ‘off’).
‘mh-extract-from-attribution-verb’
     Verb to use for attribution when a message is yanked by ‘C-c C-y’
     (default: ‘"wrote:"’).
‘mh-ins-buf-prefix’
     String to put before each line of a yanked or inserted message
     (default: ‘"> "’).
‘mh-letter-complete-function’
     Function to call when completing outside of address or folder
     fields (default: ‘ispell-complete-word’).
‘mh-letter-fill-column’
     Fill column to use in MH-Letter mode (default: 72).
‘mh-mml-method-default’
     Default method to use in security tags (default: ‘PGP (MIME)’ if
     support for it is available; otherwise ‘None’).
‘mh-signature-file-name’
     Source of user’s signature (default: ‘"~/.signature"’).
‘mh-signature-separator-flag’
     On means a signature separator should be inserted (default: ‘on’).
‘mh-x-face-file’
     File containing X-Face or Face header field to insert in outgoing
     mail.  (default: ‘"~/.face"’).
‘mh-yank-behavior’
     Controls which part of a message is yanked by ‘C-c C-y’ (default:
     ‘Body With Attribution’).

   The following hooks are available.

‘mail-citation-hook’
     Hook for modifying a citation just inserted in the mail buffer
     (default: ‘nil’).
‘mh-before-send-letter-hook’
     Hook run at the beginning of the ‘C-c C-c’ command (default:
     ‘nil’).
‘mh-mh-to-mime-hook’
     Hook run on the formatted letter by ‘C-c C-e’ (default: ‘nil’).
‘mh-insert-signature-hook’
     Hook run by ‘C-c C-s’ after signature has been inserted (default:
     ‘nil’).

   The following face is available.

‘mh-letter-header-field’
     Editable header field value face in draft buffers.

   The commands and options introduced here are explained in more detail
in the following sections.

* Menu:

* Editing Message::
* Inserting Letter::
* Inserting Messages::
* Signature::
* Picture::
* Adding Attachments::
* Sending PGP::
* Checking Recipients::
* Sending Message::
* Killing Draft::


File: mh-e.info,  Node: Editing Message,  Next: Inserting Letter,  Up: Editing Drafts

9.1 Editing the Message
=======================

Because the header is part of the message, you can edit the header
fields as you wish.  However, several convenience commands exist to help
you create and edit them.  For example, the command ‘C-c C-f C-t’
(‘mh-to-field’; alternatively, ‘C-c C-f t’) moves the cursor to the
‘To:’ header field, creating it if necessary.  The commands for moving
to the ‘Cc:’, ‘Subject:’, ‘From:’, ‘Reply-To:’, ‘Mail-Reply-To:’,
‘Mail-Followup-To’, ‘Bcc:’, and ‘Dcc:’ header fields are similar.

   One command behaves differently from the others, namely, ‘C-c C-f
C-f’ (‘mh-to-fcc’; alternatively, ‘C-c C-f f’).  This command will
prompt you for the folder name in which to file a copy of the draft.
*Note Folder Selection::.

   Within the header of the message, the command
<TAB> (‘mh-letter-next-header-field-or-indent’) moves between fields
that are highlighted with the face ‘mh-letter-header-field’, skipping
those fields listed in ‘mh-compose-skipped-header-fields’.  After the
last field, this command then moves point to the message body before
cycling back to the first field.  If point is already past the first
line of the message body, then this command indents by calling
‘indent-relative’ with the given prefix argument.  The command ‘S-<TAB>’
(‘mh-letter-previous-header-field’) moves backwards between the fields
and cycles to the body of the message after the first field.  Unlike the
command <TAB>, it will always take point to the last field from anywhere
in the body.

   If the field contains addresses (for example, ‘To:’ or ‘Cc:’) or
folders (for example, ‘Fcc:’) then the command ‘M-<TAB>’
(‘mh-letter-complete’) will provide alias completion (*note Aliases::).
In the body of the message, ‘M-<TAB>’ runs ‘mh-letter-complete-function’
instead, which is set to ‘'ispell-complete-word’ by default.  The
command ‘M-<TAB>’ (‘mh-letter-complete’) takes a prefix argument that is
passed to the ‘mh-letter-complete-function’.  In addition, turn on the
option ‘mh-compose-space-does-completion-flag’ to use the command <SPC>
(‘mh-letter-complete-or-space’) to perform completion in the header as
well; use a prefix argument to specify more than one space.  Addresses
are separated by a comma; when you press the comma, the command
‘mh-letter-confirm-address’ flashes the alias expansion in the
minibuffer if ‘mh-alias-flash-on-comma’ is turned on.

   Use the command ‘C-c C-t’ ‘mh-letter-toggle-header-field-display’ to
display truncated header fields.  This command is a toggle so entering
it again will hide the field.  This command takes a prefix argument: if
negative then the field is hidden, if positive then the field is
displayed (for example, ‘C-u C-c C-t’).

   Be sure to leave a row of dashes or a blank line between the header
and the body of the message.

   The body of the message is edited as you would edit any Emacs buffer
although there are a few commands and options to assist you.  You can
change the fill column in MH-Letter mode with the option
‘mh-letter-fill-column’.  By default, this option is 72 to allow others
to quote your message without line wrapping.

   You’ll often include messages that were sent from user agents that
haven’t yet realized that paragraphs consist of more than a single line.
This makes for long lines that wrap in an ugly fashion.  You’ll find
that ‘M-q’ (‘fill-paragraph’) works well even on these quoted messages,
even if they are nested, just as long as all of the quotes match the
value of ‘mh-ins-buf-prefix’ (*note Inserting Letter::).  For example,
let’s assume you have the following in your draft:

     > Hopefully this gives you an idea of what I'm currently doing. I'm \
     not sure yet whether I'm completely satisfied with my setup, but    \
     it's worked okay for me so far.

   Running ‘M-q’ on this paragraph produces:

     > Hopefully this gives you an idea of what I'm currently doing. I'm not
     > sure yet whether I'm completely satisfied with my setup, but it's
     > worked okay for me so far.

   The command ‘C-c C-o’ (‘mh-open-line’) is similar to the command
‘C-o’ (‘open-line’) in that it inserts a newline after point.  It
differs in that it also inserts the right number of quoting characters
and spaces so that the next line begins in the same column as it was.
This is useful when breaking up paragraphs in replies.  For example, if
this command was used when point was after the first period in the
paragraph above, the result would be this:

     > Hopefully this gives you an idea of what I'm currently doing.

     >                                                               I'm not
     > sure yet whether I'm completely satisfied with my setup, but it's
     > worked okay for me so far.


File: mh-e.info,  Node: Inserting Letter,  Next: Inserting Messages,  Prev: Editing Message,  Up: Editing Drafts

9.2 Inserting Letter to Which You’re Replying
=============================================

It is often useful to insert a snippet of text from a letter that
someone mailed to provide some context for your reply.  The command ‘C-c
C-y’ (‘mh-yank-cur-msg’) does this by adding an attribution, yanking a
portion of text from the message to which you’re replying, and inserting
‘mh-ins-buf-prefix’ (‘> ’) before each line.

     Michael W Thelen <thelenm@stop.mail-abuse.org> wrote:

     > Hopefully this gives you an idea of what I'm currently doing. I'm not
     > sure yet whether I'm completely satisfied with my setup, but it's
     > worked okay for me so far.

   The attribution consists of the sender’s name and email address
followed by the content of the option
‘mh-extract-from-attribution-verb’.  This option can be set to ‘wrote:’,
‘a écrit:’, and ‘schrieb:’.  You can also use the ‘Custom String’ menu
item to enter your own verb.

   The prefix ‘"> "’ is the default setting for the option
‘mh-ins-buf-prefix’.  I suggest that you not modify this option since it
is used by many mailers and news readers: messages are far easier to
read if several included messages have all been indented by the same
string.  This prefix is not inserted if you use one of the supercite
flavors of ‘mh-yank-behavior’ or you have added a ‘mail-citation-hook’
as described below.

   You can also turn on the ‘mh-delete-yanked-msg-window-flag’ option to
delete the window containing the original message after yanking it to
make more room on your screen for your reply.

   You can control how the message to which you are replying is yanked
into your reply using ‘mh-yank-behavior’.  To include the entire
message, including the entire header, use ‘Body and Header’(1)(2).  Use
‘Body’ to yank just the body without the header.  To yank only the
portion of the message following the point, set this option to ‘Below
Point’.

   Choose ‘Invoke supercite’(3) to pass the entire message and header
through supercite.

   If the ‘Body With Attribution’ setting is used, then the message
minus the header is yanked and a simple attribution line is added at the
top using the value of the option ‘mh-extract-from-attribution-verb’.
This is the default.

   If the ‘Invoke supercite’ or ‘Body With Attribution’ settings are
used, the ‘-noformat’ argument is passed to the ‘repl’ program to
override a ‘-filter’ or ‘-format’ argument.  These settings also have
‘Automatically’ variants that perform the action automatically when you
reply so that you don’t need to use ‘C-c C-y’ at all.  Note that this
automatic action is only performed if the show buffer matches the
message being replied to.  People who use the automatic variants tend to
turn on the option ‘mh-delete-yanked-msg-window-flag’ as well so that
the show window is never displayed.

   If the show buffer has a region, the option ‘mh-yank-behavior’ is
ignored unless its value is one of ‘Attribution’ variants in which case
the attribution is added to the yanked region.

   If this isn’t enough, you can gain full control over the appearance
of the included text by setting ‘mail-citation-hook’ to a function that
modifies it.  This hook is ignored if the option ‘mh-yank-behavior’ is
set to one of the supercite flavors.  Otherwise, this option controls
how much of the message is passed to the hook.  The function can find
the citation between point and mark and it should leave point and mark
around the modified citation text for the next hook function.  The
standard prefix ‘mh-ins-buf-prefix’ is not added if this hook is set.

   For example, if you use the hook function ‘trivial-cite’
(https://www.emacswiki.org/emacs/TrivialCite) (which is NOT part of
Emacs), set ‘mh-yank-behavior’ to ‘Body and Header’.

   ---------- Footnotes ----------

   (1) If you’d rather have the header cleaned up, use ‘C-u r’ instead
of ‘r’ when replying (*note Replying::).

   (2) In the past you would use this setting and set
‘mail-citation-hook’ to ‘supercite’, but this usage is now deprecated in
favor of the ‘Invoke supercite’ setting.

   (3) _Supercite_ is a full-bodied, full-featured, citation package
that comes standard with Emacs.


File: mh-e.info,  Node: Inserting Messages,  Next: Signature,  Prev: Inserting Letter,  Up: Editing Drafts

9.3 Inserting Messages
======================

Messages can be inserted with ‘C-c C-i’ (‘mh-insert-letter’).  This
command prompts you for the folder and message number, which defaults to
the current message in that folder.  It then inserts the messages,
indented by ‘mh-ins-buf-prefix’ (‘> ’) unless ‘mh-yank-behavior’ is set
to one of the supercite flavors in which case supercite is used to
format the message.  Certain undesirable header fields (see
‘mh-invisible-header-fields-compiled’) are removed before insertion.

   If given a prefix argument (like ‘C-u C-c C-i’), the header is left
intact, the message is not indented, and ‘> ’ is not inserted before
each line.  This command leaves the mark before the letter and point
after it.


File: mh-e.info,  Node: Signature,  Next: Picture,  Prev: Inserting Messages,  Up: Editing Drafts

9.4 Inserting Your Signature
============================

You can insert your signature at the current cursor location with the
command ‘C-c C-s’ (‘mh-insert-signature’).

   By default, the text of your signature is taken from the file
‘~/.signature’.  You can read from other sources by changing the option
‘mh-signature-file-name’.  This file may contain a “vCard” in which case
an attachment is added with the vCard.

   The option ‘mh-signature-file-name’ may also be a symbol, in which
case that function is called.  You may not want a signature separator to
be added for you; instead you may want to insert one yourself.  Options
that you may find useful to do this include ‘mh-signature-separator’
(when inserting a signature separator) and
‘mh-signature-separator-regexp’ (for finding said separator).  The
function ‘mh-signature-separator-p’, which reports ‘t’ if the buffer
contains a separator, may be useful as well.

   A signature separator (‘"-- "’) will be added if the signature block
does not contain one and ‘mh-signature-separator-flag’ is on.  It is not
recommended that you change this option since various mail user agents,
including MH-E, use the separator to present the signature differently,
and to suppress the signature when replying or yanking a letter into a
draft.

   The hook ‘mh-insert-signature-hook’ is run after the signature is
inserted.  Hook functions may access the actual name of the file or the
function used to insert the signature with ‘mh-signature-file-name’.

   The signature can also be inserted using Identities.  *Note
Identities::.


File: mh-e.info,  Node: Picture,  Next: Adding Attachments,  Prev: Signature,  Up: Editing Drafts

9.5 Inserting Your Picture
==========================

You can insert your picture in the header of your mail message so that
recipients see your face in the ‘From:’ header field if their mail user
agent is sophisticated enough.  In MH-E, this is done by placing your
image in the file named by the option ‘mh-x-face-file’ which is
‘~/.face’ by default.

   If the file starts with either of the strings ‘X-Face:’, ‘Face:’ or
‘X-Image-URL:’ then the contents are added to the message header
verbatim.  Otherwise it is assumed that the file contains the value of
the ‘X-Face:’ header field.

   The ‘X-Face:’ header field, which is a low-resolution, black and
white image, can be generated using the ‘compface’
(ftp://ftp.cs.indiana.edu/pub/faces/compface/compface.tar.Z) command.
The ‘Online X-Face Converter’ (https://www.dairiki.org/xface/) is a
useful resource for quick conversion of images into ‘X-Face:’ header
fields.

   Use the ‘make-face’ (https://quimby.gnus.org/circus/face/make-face)
script to convert a JPEG image to the higher resolution, color, ‘Face:’
header field.

   The URL of any image can be used for the ‘X-Image-URL:’ field and no
processing of the image is required.

   To prevent the setting of any of these header fields, either set
‘mh-x-face-file’ to ‘nil’, or simply ensure that the file defined by
this option doesn’t exist.

   *Note Viewing::, to see how these header fields are displayed in
MH-E.


File: mh-e.info,  Node: Adding Attachments,  Next: Sending PGP,  Prev: Picture,  Up: Editing Drafts

9.6 Adding Attachments
======================

MH-E has the capability to create multimedia messages.  It uses the MIME
(Multipurpose Internet Mail Extensions) protocol(1) The MIME protocol
allows you to incorporate images, sound, video, binary files, and even
commands that fetch a file with ‘ftp’ when your recipient reads the
message!

   If you were to create a multimedia message with plain MH commands,
you would insert ‘mhbuild’ or ‘mhn’ directives (henceforth called
“MH-style directives” into your draft and use the ‘mhbuild’ command in
nmh or ‘mhn’ command in MH and GNU mailutils to expand them.  MH-E works
in much the same way, although it provides a handful of commands
prefixed with ‘C-c C-m’ to insert the directives so you don’t need to
remember the syntax of them.  Remember: you can always add MH-style
directives by hand(2).

   In addition to MH-style directives, MH-E also supports MML (MIME Meta
Language) tags(3).  The option ‘mh-compose-insertion’ can be used to
choose between them.  By default, this option is set to ‘MML’ if it is
supported since it provides a lot more functionality.  This option can
also be set to ‘MH’ if MH-style directives are preferred.

   The MH-E MIME commands require a “media type” for each body part or
attachment.  For example, a PDF document is of type ‘application/pdf’
and an HTML document is of type ‘text/html’.  Some commands fill in the
media type for you, whereas others require you to enter one.

   In the cases where MH-E can do so, it will determine the media type
automatically.  It uses the ‘file’ command to do this.  Failing that,
the Emacs function ‘mailcap-mime-types’ is used to provide a list from
which to choose.  This function usually reads the file
‘/etc/mime.types’.

   Whether the media type is chosen automatically, or you choose it from
a list, use the type that seems to match best the file that you are
including.  In the case of binaries, the media type
‘application/x-executable’ can be useful.  If you can’t find an
appropriate media type, use ‘text/plain’ for text messages and
‘application/octet-stream’ for everything else.

   You are also sometimes asked for a “content description”.  This is
simply an optional brief phrase, in your own words, that describes the
object.  If you don’t care to enter a content description, just press
return and none will be included; however, a reader may skip over
multimedia fields unless the content description is compelling.

   You can also create your own MIME body parts.  In the following
example, I describe how you can create and edit a ‘text/enriched’ body
part to liven up your plain text messages with boldface, underlining,
and italics.  I include an Emacs function which inserts enriched text
tags.

     (defvar enriched-text-types '(("b" . "bold") ("i" . "italic")
                                   ("u" . "underline")
                                   ("s" . "smaller") ("B" . "bigger")
                                   ("f" . "fixed")
                                   ("c" . "center"))
       "Alist of (final-character . tag) choices for add-enriched-text.
     Additional types can be found in RFC 1563.")

     (defun add-enriched-text (begin end)
       "Add enriched text tags around region.
     The tag used comes from the list enriched-text-types and is
     specified by the last keystroke of the command.  When called from Lisp,
     arguments are BEGIN and END."
       (interactive "r")
       ;; Set type to the tag indicated by the last keystroke.
       (let ((type (cdr (assoc (char-to-string (logior last-input-char ?`))
                               enriched-text-types))))
         (save-restriction               ; restores state from narrow-to-region
           (narrow-to-region begin end)      ; narrow view to region
           (goto-char (point-min))           ; move to beginning of text
           (insert "<" type ">")             ; insert beginning tag
           (goto-char (point-max))           ; move to end of text
           (insert "</" type ">"))))         ; insert terminating tag
     Emacs function for entering enriched text


   To use the function ‘add-enriched-text’, first add it to ‘~/.emacs’
and create key bindings for it (*note Composing::).

   Then, in your plain text message, set the mark with ‘C-@’ or
‘C-<SPC>’, type in the text to be highlighted, and type ‘C-c t b’.  This
adds ‘<bold>’ where you set the mark and adds ‘</bold>’ at the location
of your cursor, giving you something like: ‘You should be
<bold>very</bold>’.

   Before sending this message, use ‘C-c C-m C-m’ (‘mh-mml-to-mime’)(4)
to add MIME header fields.  Then replace ‘text/plain’ with
‘text/enriched’ in the ‘Content-Type:’ header field.

   You may also be interested in investigating ‘sgml-mode’.

Including Files
---------------

Binaries, images, sound, and video can be inserted in your message with
the command ‘C-c C-m C-i’ (‘mh-compose-insertion’).  You are prompted
for the filename containing the object, the media type if it cannot be
determined automatically, and a content description.  If you’re using
MH-style directives, you will also be prompted for additional
attributes.

Forwarding Multimedia Messages
------------------------------

Mail may be forwarded with MIME using the command ‘C-c C-m C-f’
(‘mh-compose-forward’).  You are prompted for a content description, the
name of the folder in which the messages to forward are located, and a
range of messages, which defaults to the current message in that folder.
*Note Ranges::.

Including an FTP Reference
--------------------------

You can have your message initiate an ‘ftp’ transfer when the recipient
reads the message.  To do this, use the command ‘C-c C-m C-g’
(‘mh-mh-compose-anon-ftp’).  You are prompted for the remote host and
filename, the media type, and the content description.

Including tar Files
-------------------

If the remote file is a compressed tar file, you can use ‘C-c C-m C-t’
(‘mh-mh-compose-external-compressed-tar’).  Then, in addition to
retrieving the file via anonymous _ftp_ as per the command ‘C-c C-m C-g’
(‘mh-mh-compose-anon-ftp’), the file will also be uncompressed and
untarred.  You are prompted for the remote host and filename and the
content description.

Including Other External Files
------------------------------

The command ‘C-c C-m C-x’ (‘mh-mh-compose-external-type’) is a general
utility for referencing external files.  In fact, all of the other
commands that insert tags to access external files call this command.
You are prompted for the access type, remote host and filename, and
content type.  If you provide a prefix argument, you are also prompted
for a content description, attributes, parameters, and a comment.

Previewing Multimedia Messages
------------------------------

When you are finished editing a MIME message, it might look like this:

     3 t08/24  root               received fax files on Wed Aug 24 11:00:
     4+t08/24  To:wohler          Test<<This is a test message to get the





     --:%%  {+inbox} 4 msgs (1-4)   Bot L4     (MH-Folder Show)---------------
     To: wohler
     cc:
     Subject: Test of MIME
     --------
     Here is the SETI@Home logo:

     <#part type="image/x-xpm" filename="~/lib/images/setiathome.xpm"
     disposition=inline description="SETI@home logo">
     <#/part>
     --:**  {draft}   All L8     (MH-Letter)----------------------------------

   MH-E MIME draft

   Typically, you send a message with attachments just like any other
message (*note Sending Message::).

   However, you may take a sneak preview of the MIME encoding if you
wish by running the command ‘C-c C-m C-m’ (‘mh-mml-to-mime’).  The
following screen shows the MIME encoding specified by the tags.  You can
see why mail user agents are usually built to hide these details from
the user.

     To: wohler
     cc:
     Subject: Test of MIME
     X-Mailer: MH-E 8.1; nmh 1.1; GNU Emacs 23.1
     MIME-Version: 1.0
     Content-Type: multipart/mixed; boundary="=-=-="
     --------
     --=-=-=

     Here is the SETI@Home logo:


     --=-=-=
     Content-Type: image/x-xpm
     Content-Disposition: inline; filename=setiathome.xpm
     Content-Transfer-Encoding: base64
     Content-Description: SETI@home logo

     LyogWFBNICovCnN0YXRpYyBjaGFyICogc2V0aWF0aG9tZV94cG1bXSA9IHsKIjQ1IDQ1IDc2N
     --:--  {draft}   Top L1     (MH-Letter)----------------------------------

   MH-E MIME draft ready to send

   This action can be undone by running ‘C-_’ (‘undo’).

   If you’re using MH-style directives, use ‘C-c C-e’ (‘mh-mh-to-mime’)
instead of ‘C-c C-m C-m’.  This runs the command ‘mhbuild’ (‘mhn’) on
the message which expands the tags(5).  This action can be undone by
running ‘C-c C-m C-u’ (‘mh-mh-to-mime-undo’), which works by reverting
to a backup file.  You are prompted to confirm this action, but you can
avoid the confirmation by adding an argument (for example, ‘C-u C-c C-m
C-u’).

   If you wish to pass additional arguments to ‘mhbuild’ (‘mhn’) to
affect how it builds your message, use the option ‘mh-mh-to-mime-args’.
For example, you can build a consistency check into the message by
setting ‘mh-mh-to-mime-args’ to ‘-check’.  The recipient of your message
can then run ‘mhbuild -check’ on the message—‘mhbuild’ (‘mhn’) will
complain if the message has been corrupted on the way.  The command ‘C-c
C-e’ only consults this option when given a prefix argument (as in ‘C-u
C-c C-e’).

   The hook ‘mh-mh-to-mime-hook’ is called after the message has been
formatted by ‘C-c C-e’.

   ---------- Footnotes ----------

   (1) MIME is defined in RFC 2045
(https://www.rfc-editor.org/rfc/rfc2045.txt).

   (2) See the section Sending MIME Mail
(https://rand-mh.sourceforge.io/book//usimim.html#SeMIMa) in the MH
book.

   (3) *Note Composing with MML: (emacs-mime)Composing.

   (4) Use ‘C-c C-e’ (‘mh-mh-to-mime’) if you’re using MH-style
directives.

   (5) See the section Sending MIME Mail
(https://rand-mh.sourceforge.io/book//usimim.html#SeMIMa) in the MH
book.


File: mh-e.info,  Node: Sending PGP,  Next: Checking Recipients,  Prev: Adding Attachments,  Up: Editing Drafts

9.7 Signing and Encrypting Messages
===================================

MH-E can sign and encrypt messages as defined in RFC 3156
(https://www.rfc-editor.org/rfc/rfc3156.txt).  If you should choose to
sign or encrypt your message, use one of the following commands to do so
any time before sending your message.

   The command ‘C-c C-m C-s’ (‘mh-mml-secure-message-sign’) inserts the
following tag:

     <#secure method=pgpmime mode=sign>

   This is used to sign your message digitally.  Likewise, the command
‘C-c C-m C-e’ (‘mh-mml-secure-message-encrypt’) inserts the following
tag:

     <#secure method=pgpmime mode=encrypt>

   This is used to encrypt your message.  Finally, the command ‘C-c C-m
s e’ (‘mh-mml-secure-message-signencrypt’) inserts the following tag:

     <#secure method=pgpmime mode=signencrypt>

   This is used to sign and encrypt your message.  In each of these
cases, a proper multipart message is created for you when you send the
message.  Use the command ‘C-c C-m C-n’ (‘mh-mml-unsecure-message’) to
remove these tags.  Use a prefix argument (as in ‘C-u C-c C-m s e’) to
be prompted for one of the possible security methods (see
‘mh-mml-method-default’).

   The option ‘mh-mml-method-default’ is used to select between a
variety of mail security mechanisms.  The default is ‘PGP (MIME)’ if it
is supported; otherwise, the default is ‘None’.  Other mechanisms
include vanilla ‘PGP’ and ‘S/MIME’.

   The ‘pgg’ customization group may have some settings which may
interest you.  *Note The PGG Manual: (pgg)Top.

   In particular, I turn on the option ‘pgg-encrypt-for-me’ so that all
messages I encrypt are encrypted with my public key as well.  If you
keep a copy of all of your outgoing mail with a ‘Fcc:’ header field,
this setting is vital so that you can read the mail you write!


File: mh-e.info,  Node: Checking Recipients,  Next: Sending Message,  Prev: Sending PGP,  Up: Editing Drafts

9.8 Checking Recipients
=======================

The command ‘C-c C-w’ (‘mh-check-whom’) expands aliases so you can check
the actual address(es) in the alias.  A new buffer named ‘*MH-E
Recipients*’ is created with the output of ‘whom’ (*note
Miscellaneous::)(1).

   ---------- Footnotes ----------

   (1) See the section What now?—and the whatnow Program
(https://rand-mh.sourceforge.io/book//senove.html#WhaPro) in the MH
book.


File: mh-e.info,  Node: Sending Message,  Next: Killing Draft,  Prev: Checking Recipients,  Up: Editing Drafts

9.9 Sending a Message
=====================

When you are all through editing a message, you send it with the command
‘C-c C-c’ (‘mh-send-letter’).  You can give a prefix argument (as in
‘C-u C-c C-c’) to monitor the first stage of the delivery; this output
can be found in a buffer called ‘*MH-E Mail Delivery*’ (*note
Miscellaneous::).

   The hook ‘mh-before-send-letter-hook’ is run at the beginning of the
command ‘C-c C-c’.  For example, if you want to check your spelling in
your message before sending, add the function ‘ispell-message’.

   In case the MH ‘send’ program(1) is installed under a different name,
use ‘mh-send-prog’ to tell MH-E the name.

   The hook ‘mh-annotate-msg-hook’ is run after annotating the message
and scan line (*note Sending Mail::).

   ---------- Footnotes ----------

   (1) See the section Sending Some Mail: comp send
(https://rand-mh.sourceforge.io/book//sensen.html) in the MH book.


File: mh-e.info,  Node: Killing Draft,  Prev: Sending Message,  Up: Editing Drafts

9.10 Killing the Draft
======================

If for some reason you are not happy with the draft, you can use the
command ‘C-c C-q’ (‘mh-fully-kill-draft’) to kill the draft buffer and
delete the draft message.  Use the command ‘C-x k’ (‘kill-buffer’) if
you don’t want to delete the draft message.


File: mh-e.info,  Node: Aliases,  Next: Identities,  Prev: Editing Drafts,  Up: Top

10 Aliases
**********

MH aliases are used in the same way in MH-E as they are in MH.  Any
alias listed as a recipient will be expanded when the message is sent.
This chapter discusses other things you can do with aliases in MH-E.

   The following commands are available in MH-Letter mode with the
exception of ‘mh-alias-reload’ which can be called from anywhere.

‘<SPC>’
     Perform completion or insert space (‘mh-letter-complete-or-space’).
‘M-<TAB>’
     Perform completion on header field or word preceding point
     (‘mh-letter-complete’).
‘mh-alias-apropos’
     Show all aliases or addresses that match a regular expression.
‘mh-alias-grab-from-field’
     Add alias for the sender of the current message
‘mh-alias-reload’
     Reload MH aliases.

   The ‘mh-alias’ customization group contains options associated with
aliases.

‘mh-alias-completion-ignore-case-flag’
     On means don’t consider case significant in MH alias completion
     (default: ‘on’).
‘mh-alias-expand-aliases-flag’
     On means to expand aliases entered in the minibuffer (default:
     ‘off’).
‘mh-alias-flash-on-comma’
     Specify whether to flash address or warn on translation (default:
     ‘Flash but Don't Warn If No Alias’).
‘mh-alias-insert-file’
     Filename used to store a new MH-E alias (default: ‘Use Aliasfile
     Profile Component’).
‘mh-alias-insertion-location’
     Specifies where new aliases are entered in alias files (default:
     ‘Alphabetical’).
‘mh-alias-local-users’
     If ‘on’, local users are added to alias completion (default: ‘on’).
‘mh-alias-local-users-prefix’
     String prefixed to the real names of users from the password file
     (default: ‘"local."’.
‘mh-alias-passwd-gecos-comma-separator-flag’
     On means the GECOS field in the password file uses a comma
     separator (default: ‘on’).

   The following hook is available.

‘mh-alias-reloaded-hook’
     Hook run by ‘mh-alias-reload’ after loading aliases (default:
     ‘nil’).

Adding Addresses to Draft
-------------------------

You can use aliases when you are adding recipients to a message.

   In order to use minibuffer prompting for recipients and the subject
line in the minibuffer, turn on the option ‘mh-compose-prompt-flag’
(*note Composing::), and use the <TAB> (‘minibuffer-complete’) command
to complete aliases (and optionally local logins) when prompted for the
recipients.  Turn on the option ‘mh-alias-expand-aliases-flag’ if you
want these aliases to be expanded to their respective addresses in the
draft.

   Otherwise, you can complete aliases in the header of the draft with
‘M-<TAB>’ (‘mh-letter-complete’) or <SPC>
(‘mh-letter-complete-or-space’).

   As MH ignores case in the aliases, so too does MH-E.  However, you
may turn off the option ‘mh-alias-completion-ignore-case-flag’ to make
case significant which can be used to segregate completion of your
aliases.  You might use uppercase for mailing lists and lowercase for
people.  For example, you might have:

     mark.baushke: Mark Baushke <mdb@stop.mail-abuse.org>
     MH-E: MH-E Mailing List <mh-e-devel@stop.mail-abuse.org>

   When this option is turned off, if you were to type ‘M’ in the ‘To:’
field and then ‘M-<TAB>’, then you’d get the list; if you started with
‘m’ and then entered ‘M-<TAB>’, then you’d get Mark’s address.  Note
that this option affects completion only.  If you were to enter
‘Mark.Baushke’, it would still be identified with your ‘mark.baushke’
alias.

   To verify that the alias you’ve entered is valid, the alias will be
displayed in the minibuffer when you type a comma
(‘mh-letter-confirm-address’ or ‘mh-alias-minibuffer-confirm-address’ if
the option ‘mh-compose-prompt-flag’ is turned on).  *Note Composing::.
This behavior can be controlled with the option
‘mh-alias-flash-on-comma’ which provides three choices: ‘Flash but Don't
Warn If No Alias’, ‘Flash and Warn If No Alias’, and ‘Don't Flash Nor
Warn If No Alias’.

   For another way to verify the alias expansion, see *note Checking
Recipients::.

Loading Aliases
---------------

MH-E loads aliases for completion and folder name hints from various
places.  It uses the MH command ‘ali’(1) to read aliases from the files
listed in the profile component ‘Aliasfile:’ as well as system-wide
aliases (for example, ‘/etc/nmh/MailAliases’).

   In addition, aliases are created from ‘/etc/passwd’ entries with a
user ID larger than a magical number, typically 200.  This can be a
handy tool on a machine where you and co-workers exchange messages.
These aliases have the form ‘local.FIRST.LAST’ if a real name is present
in the password file.  Otherwise, the alias will have the form
‘local.LOGIN’.

   The prefix ‘local.’ can be modified via the option
‘mh-alias-local-users-prefix’.  This option can also be set to ‘Use
Login’.

   For example, consider the following password file entry:

     psg:x:1000:1000:Peter S Galbraith,,,:/home/psg:/bin/tcsh

   The following settings of option ‘mh-alias-local-users-prefix’ will
produce the associated aliases:

‘"local."’
     local.peter.galbraith
‘""’
     peter.galbraith
‘Use Login’
     psg

   In the example above, commas are used to separate different values
within the so-called GECOS field.  This is a fairly common usage.
However, in the rare case that the GECOS field in your password file is
not separated by commas and whose contents may contain commas, you can
turn the option ‘mh-alias-passwd-gecos-comma-separator-flag’ off.

   If you’re on a system with thousands of users you don’t know, and the
loading of local aliases slows MH-E down noticeably, then the local
alias feature can be disabled by turning off the option
‘mh-alias-local-users’.  This option also takes a string which is
executed to generate the password file.  For example, use ‘ypcat passwd’
to obtain the NIS password file.

   Since aliases are updated frequently, MH-E reloads aliases
automatically whenever an alias lookup occurs if an alias source has
changed.  However, you can reload your aliases manually by calling the
command ‘M-x mh-alias-reload’ directly.  This command runs
‘mh-alias-reloaded-hook’ after the aliases have been loaded.

Adding Aliases
--------------

In the past, you have manually added aliases to your alias file(s)
listed in your ‘Aliasfile:’ profile component.  MH-E provides other
methods for maintaining your alias file(s).

   You can use the ‘M-x mh-alias-add-alias’ command which will prompt
you for the alias and address that you would like to add.  If the alias
exists already, you will have the choice of inserting the new alias
before or after the old alias.  In the former case, this alias will be
used when sending mail to this alias.  In the latter case, the alias
serves as an additional folder name hint when filing messages (*note
Folder Selection::).

   Earlier, the alias prefix ‘local’ was presented.  You can use other
prefixes to organize your aliases or disambiguate entries.  You might
use prefixes for locales, jobs, or activities.  For example, I have:

     ; Work
     attensity.don.mitchell: Don Mitchell <dmitchell@stop.mail-abuse.com>
     isharp.don.mitchell: Don Mitchell <donaldsmitchell@stop.mail-abuse.com>
     ...
     ; Sport
     diving.ken.mayer: Ken Mayer <kmayer@stop.mail-abuse.com>
     sailing.mike.maloney: Mike Maloney <mmaloney@stop.mail-abuse.com>
     ...
     ; Personal
     ariane.kolkmann: Ariane Kolkmann <ArianeKolkmann@stop.mail-abuse.com>
     ...

   Using prefixes instead of postfixes helps you explore aliases during
completion.  If you forget the name of an old dive buddy, you can enter
‘div’ and then <SPC> to get a listing of all your dive buddies.

   An alias for the sender of the current message is added automatically
by clicking on the ‘Grab From alias’ tool bar button or by running the
‘M-x mh-alias-grab-from-field’ command.  Aliases for other recipients of
the current message are added by placing your cursor over the desired
recipient and giving the ‘M-x mh-alias-add-address-under-point’ command.

   The options ‘mh-alias-insert-file’ and ‘mh-alias-insertion-location’
controls how and where these aliases are inserted.

   The default setting of option ‘mh-alias-insert-file’ is ‘Use
Aliasfile Profile Component’.  This option can also hold the name of a
file or a list a file names.  If this option is set to a list of file
names, or the ‘Aliasfile:’ profile component contains more than one file
name, MH-E will prompt for one of them.

   The option ‘mh-alias-insertion-location’ is set to ‘Alphabetical’ by
default.  If you organize your alias file in other ways, then the
settings ‘Top’ and ‘Bottom’ might be more appropriate.

Querying Aliases
----------------

If you can’t quite remember an alias, you can use ‘M-x mh-alias-apropos’
to show all aliases or addresses that match a regular expression (*note
Syntax of Regular Expressions: (emacs)Regexps.).

   ---------- Footnotes ----------

   (1) See the section MH Aliases
(https://rand-mh.sourceforge.io/book//mh.html) in the MH book.


File: mh-e.info,  Node: Identities,  Next: Speedbar,  Prev: Aliases,  Up: Top

11 Identities
*************

MH-E supports the concept of multiple personalities or identities.  This
means that you can easily have a different header and signature at home
and at work.

   A couple of commands are used to insert identities in MH-Letter mode
which are also found in the ‘Identity’ menu.

‘C-c C-d’
     Insert fields specified by given identity (‘mh-insert-identity’).
‘C-c M-d’
     Insert custom fields if recipient found in ‘mh-auto-fields-list’
     (‘mh-insert-auto-fields’).

   The ‘mh-identity’ customization group contains the following options.

‘mh-auto-fields-list’
     List of recipients for which header lines are automatically
     inserted (default: ‘nil’).
‘mh-auto-fields-prompt-flag’
     On means to prompt before sending if fields inserted (default:
     ‘on’)
‘mh-identity-default’
     Default identity to use when ‘mh-letter-mode’ is called (default:
     ‘None’).
‘mh-identity-handlers’
     Handler functions for fields in ‘mh-identity-list’.
‘mh-identity-list’
     List of identities (default: ‘nil’).

   Some of the common header fields that people change depending on the
context are the ‘From:’ and ‘Organization:’ fields, as well as the
signature.

   This is done by customizing the option ‘mh-identity-list’.  In the
customization buffer for this option, click on the ‘INS’ button and
enter a label such as ‘Home’ or ‘Work’.  Then click on the ‘INS’ button
with the label ‘Add at least one item below’.  The ‘Value Menu’ has the
following menu items:

‘From Field’
     Specify an alternate ‘From:’ header field.  You must include a
     valid email address.  A standard format is ‘First Last
     <login@host.domain>’.  If you use an initial with a period, then
     you must quote your name as in ‘"First I. Last"
     <login@host.domain>’.
‘Organization Field’
     People usually list the name of the company where they work here.
‘Other Field’
     Set any arbitrary header field and value here.  Unless the header
     field is a standard one, precede the name of your field’s label
     with ‘X-’, as in ‘X-Fruit-of-the-Day:’.
‘Attribution Verb’
     This value overrides the setting of
     ‘mh-extract-from-attribution-verb’.  *Note Inserting Letter::.
‘Signature’
     Set your signature with this item.  You can specify the contents of
     ‘mh-signature-file-name’, a file, or a function.  *Note
     Signature::.
‘GPG Key ID’
     Specify a different key to sign or encrypt messages.

   You can select the identities you have added via the menu called
‘Identity’ in the MH-Letter buffer.  You can also use ‘C-c C-d’
(‘mh-insert-identity’).  To clear the fields and signature added by the
identity, select the ‘None’ identity.

   The ‘Identity’ menu contains two other items to save you from having
to set the identity on every message.  The menu item ‘Set Default for
Session’ can be used to set the default identity to the current identity
until you exit Emacs.  The menu item ‘Save as Default’ sets the option
‘mh-identity-default’ to the current identity setting.  You can also
customize the option ‘mh-identity-default’ in the usual fashion.  If you
find that you need to add another identity, the menu item ‘Customize
Identities’ is available for your convenience.

   The option ‘mh-auto-fields-list’ can also be used to set the identity
depending on the recipient to provide even more control.  To customize
‘mh-auto-fields-list’, click on the ‘INS’ button and enter a regular
expression for the recipient’s address (*note Syntax of Regular
Expressions: (emacs)Regexps.).  Click on the ‘INS’ button with the ‘Add
at least one item below’ label.  The ‘Value Menu’ contains the following
menu items:

‘Identity’
     Select an identity from those configured in ‘mh-identity-list’.
     All of the information for that identity will be added if the
     recipient matches.
‘Fcc Field’
     Insert an ‘Fcc:’ header field with the folder you provide.  When
     you send the message, MH will put a copy of your message in this
     folder.
‘Mail-Followup-To Field’
     Insert an ‘Mail-Followup-To:’ header field with the recipients you
     provide.  If the recipient’s mail user agent supports this header
     field(1), then their replies will go to the addresses listed.  This
     is useful if their replies go both to the list and to you and you
     don’t have a mechanism to suppress duplicates.  If you reply to
     someone not on the list, you must either remove the
     ‘Mail-Followup-To:’ field, or ensure the recipient is also listed
     there so that he receives replies to your reply.
‘Other Field’
     Other header fields may be added using this menu item.

   These fields can only be added after the recipient is known.  Because
you can continue to add recipients as you edit the draft, MH-E waits
until the message is sent to perform the auto-insertions.  This seems
strange at first, but you’ll get used to it.  There are two ways to help
you feel that the desired fields are added.  The first is the action
when the message is sent: if any fields are added automatically, you are
given a chance to see and to confirm these fields before the message is
actually sent.  You can do away with this confirmation by turning off
the option ‘mh-auto-fields-prompt-flag’.  The second method is manual:
once the header contains one or more recipients, you may run the command
‘C-c M-d’ (‘mh-insert-auto-fields’) or choose the ‘Identity -> Insert
Auto Fields’ menu item to insert these fields manually.  However, if you
use this command, the automatic insertion when the message is sent is
disabled.

   You should avoid using the same header field in ‘mh-auto-fields-list’
and ‘mh-identity-list’ definitions that may apply to the same message as
the result is undefined.

   The option ‘mh-identity-handlers’ is used to change the way that
fields, signatures, and attributions in ‘mh-identity-list’ are added.
To customize ‘mh-identity-handlers’, replace the name of an existing
handler function associated with the field you want to change with the
name of a function you have written.  You can also click on an ‘INS’
button and insert a field of your choice and the name of the function
you have written to handle it.

   The ‘Field’ field can be any field that you’ve used in your
‘mh-identity-list’.  The special fields ‘:attribution-verb’,
‘:signature’, or ‘:pgg-default-user-id’ are used for the
‘mh-identity-list’ choices ‘Attribution Verb’, ‘Signature’, and ‘GPG Key
ID’ respectively.

   The handler associated with the ‘:default’ field is used when no
other field matches.

   The handler functions are passed two or three arguments: the field
itself (for example, ‘From’), or one of the special fields (for example,
‘:signature’), and the action ‘'remove’ or ‘'add’.  If the action is
‘'add’, an additional argument containing the value for the field is
given.

   ---------- Footnotes ----------

   (1) ‘Mail-Followup-To:’ is supported by nmh.


File: mh-e.info,  Node: Speedbar,  Next: Menu Bar,  Prev: Identities,  Up: Top

12 The Speedbar
***************

You can also use the speedbar (*note Speedbar Frames: (emacs)Speedbar,)
to view your folders.  To bring up the speedbar, run ‘M-x speedbar
<RET>’.  You will see a new frame appear with all of your MH folders.
Folders with unseen messages appear in boldface.  Click on a folder name
with ‘mouse-2’ to visit that folder in a similar fashion to the command
‘F v’ (‘mh-visit-folder’) (*note Folders::).  Click on the ‘+’ icon to
expand and view the sub-folders of that folder.

   The speedbar can be manipulated with the keyboard as well.  Use the
Emacs navigational keys (like the arrow keys, or ‘C-n’) to move the
cursor over the desired folder and then use the shortcuts for the menu
items listed in the table below.

‘Visit Folder’ (<RET>)
     Visits the selected folder just as if you had used ‘F v’
     (‘mh-speed-view’).
‘Expand Nested Folders’ (‘+’)
     Expands the selected folder in the speedbar, exposing the children
     folders inside it (‘mh-speed-expand-folder’).
‘Contract Nested Folders’ (‘-’)
     Contracts or collapses the selected folder in the speedbar, hiding
     the children folders inside it (‘mh-speed-contract-folder’).
‘Refresh Speedbar’ (‘r’)
     Regenerates the list of folders in the speedbar.  Run this command
     if you’ve added or deleted a folder, or want to update the unseen
     message count before the next automatic update
     (‘mh-speed-refresh’).

   You can click on ‘mouse-3’ to bring up a context menu that contains
these items.  Dismiss the speedbar with ‘C-x 5 0’ (‘delete-frame’).

   The MH-E speedbar uses the MH command ‘flists’(1) to generate the
list of folders.  The ‘mh-speedbar’ customization group contains the
following option which controls how often the speedbar calls ‘flists’.

‘mh-speed-update-interval’
     Time between speedbar updates in seconds (default: 60).  Set to 0
     to disable automatic update.

   You can modify the appearance of the folders in the speedbar by
customizing the following faces.

‘mh-speedbar-folder’
     Basic folder face.
‘mh-speedbar-folder-with-unseen-messages’
     Folder face when folder contains unread messages.
‘mh-speedbar-selected-folder’
     Selected folder face.
‘mh-speedbar-selected-folder-with-unseen-messages’
     Selected folder face when folder contains unread messages.

   ---------- Footnotes ----------

   (1) See the section Searching for Sequences with flist
(https://rand-mh.sourceforge.io/book//morseq.html#flist) in the MH book.


File: mh-e.info,  Node: Menu Bar,  Next: Tool Bar,  Prev: Speedbar,  Up: Top

13 The Menu Bar
***************

For those of you who prefer to mouse and menu instead of using the
meta-coke-bottle-bucky keys, MH-E provides menu items for most of its
functions.  The MH-Folder buffer adds the ‘Folder’, ‘Message’, and
‘Sequence’ menus.  The MH-Letter buffer adds the ‘Identity’ and ‘Letter’
menus.  The MH-Search buffer adds the ‘Search’ menu.  There’s no need to
list the actual items here, as you can more easily see them for
yourself, and the functions are already described elsewhere in this
manual.

   For a description of the menu bar, please *Note The Menu Bar:
(emacs)Menu Bar.

   The Emacs manual describes how to get help for a particular menu
item.  You can also look up a menu item in the index of this manual in
two ways: all of the menu items are listed alphabetically, and you can
also browse all of the items under the index entry ‘menu item’.


File: mh-e.info,  Node: Tool Bar,  Next: Searching,  Prev: Menu Bar,  Up: Top

14 The Tool Bar
***************

Emacs also provides a graphical tool bar.  For a description of the tool
bar, please *Note Tool Bars: (emacs)Tool Bars.

   MH-E adds several icons to this tool bar; you can modify the MH-E
aspects of the tool bar via the ‘mh-tool-bar’ customization group.

‘mh-tool-bar-folder-buttons’
     List of buttons to include in MH-Folder tool bar (default: a
     checklist too long to list here).
‘mh-tool-bar-letter-buttons’
     List of buttons to include in MH-Letter tool bar (default: a
     checklist too long to list here).
‘mh-tool-bar-search-function’
     Function called by the tool bar search button (default:
     ‘mh-search’).
‘mh-xemacs-tool-bar-position’
     Tool bar location (default: ‘Same As Default Tool Bar’).
‘mh-xemacs-use-tool-bar-flag’
     If ‘on’, use tool bar (default: ‘on’, if supported).

   In GNU Emacs, icons for some of MH-E’s functions are added to the
tool bar.  In XEmacs, you have the opportunity to create a separate tool
bar for the MH-E icons.

   In either case, you can select which of these functions you’d like to
see by customizing the options ‘mh-tool-bar-folder-buttons’ and
‘mh-tool-bar-letter-buttons’.  As you probably guessed, the former
customizes the tool bar in MH-Folder mode and the latter in MH-Letter
mode.  Both of these options present you with a list of functions; check
the functions whose icons you want to see and clear the check boxes for
those you don’t.

   The function associated with the searching icon can be set via the
option ‘mh-tool-bar-search-function’.  By default, this is set to
‘mh-search’.  *Note Searching::.  You can also choose ‘Other Function’
from the ‘Value Menu’ and enter a function of your own choosing.

   XEmacs provides a couple of extra options.  The first,
‘mh-xemacs-use-tool-bar-flag’, controls whether to show the MH-E icons
at all.  By default, this option is turned on if the window system
supports tool bars.  If your system doesn’t support tool bars, then you
won’t be able to turn on this option.

   The second extra option is ‘mh-xemacs-tool-bar-position’ which
controls the placement of the tool bar along the four edges of the
frame.  You can choose from one of ‘Same As Default Tool Bar’, ‘Top’,
‘Bottom’, ‘Left’, or ‘Right’.  If this variable is set to anything other
than ‘Same As Default Tool Bar’ and the default tool bar is in a
different location, then two tool bars will be displayed: the MH-E tool
bar and the default tool bar.


File: mh-e.info,  Node: Searching,  Next: Threading,  Prev: Tool Bar,  Up: Top

15 Searching Through Messages
*****************************

Earlier, the command ‘F s’ (‘mh-search’) was introduced which helps you
find messages that lie buried in your folders (*note Folders::).  This
chapter covers this command in more detail.  Several commands are used
to compose the search criteria and to start searching.  A couple of them
can be found in the ‘Search’ menu.

‘C-c ?’
     Display cheat sheet for the MH-E commands (‘mh-help’).
‘C-c C-c’
     Find messages using ‘mh-search-program’ (‘mh-index-do-search’).
‘C-c C-p’
     Find messages using ‘pick’ (‘mh-pick-do-search’).
‘C-c ?’
     Display cheat sheet for the MH-E commands (‘mh-help’).
‘C-c C-f a’
‘C-c C-f C-a’
     Move to ‘Mail-Reply-To:’ header field (‘mh-to-field’).
‘C-c C-f b’
‘C-c C-f C-b’
     Move to ‘Bcc:’ header field (‘mh-to-field’).
‘C-c C-f c’
‘C-c C-f C-c’
     Move to ‘Cc:’ header field (‘mh-to-field’).
‘C-c C-f d’
‘C-c C-f C-d’
     Move to ‘Dcc:’ header field (‘mh-to-field’).
‘C-c C-f f’
‘C-c C-f C-f’
     Move to ‘Fcc:’ header field (‘mh-to-field’).
‘C-c C-f l’
‘C-c C-f C-l’
     Move to ‘Mail-Followup-To:’ header field (‘mh-to-field’).
‘C-c C-f m’
‘C-c C-f C-m’
     Move to ‘From:’ header field (‘mh-to-field’).
‘C-c C-f r’
‘C-c C-f C-r’
     Move to ‘Reply-To:’ header field (‘mh-to-field’).
‘C-c C-f s’
‘C-c C-f C-s’
     Move to ‘Subject:’ header field (‘mh-to-field’).
‘C-c C-f t’
‘C-c C-f C-t’
     Move to ‘To:’ header field (‘mh-to-field’).

   Another few commands are available in the MH-Folder buffer resulting
from a search.

‘<TAB>’
     Jump to the next folder marker (‘mh-index-next-folder’).
‘S-<TAB>’
     Jump to the previous folder marker (‘mh-index-previous-folder’).
‘v’
     Visit original folder from where the message at point was found
     (‘mh-index-visit-folder’).

   There is one option from the ‘mh-search’ customization group used in
searching.

‘mh-search-program’
     Search program that MH-E shall use (default: ‘Auto-detect’).

   The following hook is available.

‘mh-search-mode-hook’
     Hook run upon entry to ‘mh-search-mode’ (default: ‘nil’).

   The following face is available.

‘mh-search-folder’
     Folder heading face in MH-Folder buffers created by searches.

   The command ‘F s’ (‘mh-search-folder’) helps you find messages in
your entire corpus of mail.  You can search for messages to or from a
particular person or about a particular subject.  In fact, you can also
search for messages containing selected strings in any arbitrary header
field or any string found within the messages.

   Out of the box, MH-E uses ‘pick’ to find messages.  With a little
extra effort, you can set an indexing program which rewards you with
extremely quick results.  The drawback is that sometimes the index does
not contain the words you’re looking for.  You can still use ‘pick’ in
these situations.

   You are prompted for the folder to search.  This can be ‘all’ to
search all folders.  Note that the search works recursively on the
listed folder.

   Next, an MH-Search buffer appears where you can enter search
criteria.

     From:
     To:
     Cc:
     Date:
     Subject:
     --------
     #








     --:**  search-pattern   All L7     (MH-Search)---------------------------
     Type C-c C-c to search messages, C-c C-p to use pick, C-c ? for help
   Search window

   Edit this template by entering your search criteria in an appropriate
header field that is already there, or create a new field yourself.  If
the string you’re looking for could be anywhere in a message, then place
the string underneath the row of dashes.

   As an example, let’s say that we want to find messages from Ginnean
about horseback riding in the Kosciusko National Park (Australia) during
January, 1994.  Normally we would start with a broad search and narrow
it down if necessary to produce a manageable amount of data, but we’ll
cut to the chase and create a fairly restrictive set of criteria as
follows:

     From: ginnean
     To:
     Cc:
     Date: Jan 1994
     Subject:
     --------
     horse
     kosciusko

   As with MH-Letter mode, MH-Search provides commands like ‘C-c C-f
C-t’ (‘mh-to-field’) to help you fill in the blanks.  *Note Editing
Message::.

   If you find that you do the same thing over and over when editing the
search template, you may wish to bind some shortcuts to keys.  This can
be done with the variable ‘mh-search-mode-hook’, which is called when ‘F
s’ is run on a new pattern.

   To perform the search, type ‘C-c C-c’ (‘mh-index-do-search’).
Sometimes you’re searching for text that is either not indexed, or
hasn’t been indexed yet.  In this case you can override the default
method with the pick method by running the command ‘C-c C-p’
(‘mh-pick-do-search’).

   The messages that are found are put in a temporary sub-folder of
‘+mhe-index’ and are displayed in an MH-Folder buffer.  This buffer is
special because it displays messages from multiple folders; each set of
messages from a given folder has a heading with the folder name.  The
appearance of the heading can be modified by customizing the face
‘mh-search-folder’.  You can jump back and forth between the headings
using the commands ‘<TAB>’ (‘mh-index-next-folder’) and ‘S-<TAB>’
(‘mh-index-previous-folder’).

   In addition, the command ‘v’ (‘mh-index-visit-folder’) can be used to
visit the folder of the message at point.  Initially, only the messages
that matched the search criteria are displayed in the folder.  While the
temporary buffer has its own set of message numbers, the actual messages
numbers are shown in the visited folder.  Thus, the command ‘v’ is
useful to find the actual message number of an interesting message, or
to view surrounding messages with the command ‘F r’ ‘mh-rescan-folder’.
*Note Folders::.

   Because this folder is temporary, you’ll probably get in the habit of
killing it when you’re done with ‘F k’ (‘mh-kill-folder’).  *Note
Folders::.

   You can regenerate the results by running ‘F s’ with a prefix
argument.

   Note: This command uses an ‘X-MHE-Checksum:’ header field to cache
the MD5 checksum of a message.  This means that if an incoming message
already contains an ‘X-MHE-Checksum:’ field, that message might not be
found by this command.  The following ‘procmail’ recipe avoids this
problem by renaming the existing header field:

     :0 wf
     | formail -R "X-MHE-Checksum" "X-Old-MHE-Checksum"

   *Note Limits::, for an alternative interface to searching.

15.1 Configuring Indexed Searches
=================================

The command ‘F s’ (‘mh-search’) runs the command defined by the option
‘mh-search-program’.  The default value is ‘Auto-detect’ which means
that MH-E will automatically choose one of ‘swish++’, ‘swish-e’,
‘mairix’, ‘namazu’, ‘pick’ and ‘grep’ in that order.  If, for example,
you have both ‘swish++’ and ‘mairix’ installed and you want to use
‘mairix’, then you can set this option to ‘mairix’.

   The following sub-sections describe how to set up the various
indexing programs to use with MH-E.

15.1.1 swish++
--------------

In the examples below, replace ‘/home/user/Mail’ with the path to your
MH directory.

   First create the directory ‘/home/user/Mail/.swish++’.  Then create
the file ‘/home/user/Mail/.swish++/swish++.conf’ with the following
contents:

     IncludeMeta         Bcc Cc Comments Content-Description From Keywords
     IncludeMeta         Newsgroups Resent-To Subject To
     IncludeMeta         Message-Id References In-Reply-To
     IncludeFile         Mail    *
     IndexFile           /home/user/Mail/.swish++/swish++.index

   Use the following command line to generate the swish index.  Run this
daily from cron:

     find /home/user/Mail -path /home/user/Mail/mhe-index -prune \
                          -o -path /home/user/Mail/.swish++ -prune \
                          -o -name "[0-9]*" -print \
         | index -c /home/user/Mail/.swish++/swish++.conf -

   This command does not index the folders that hold the results of your
searches in ‘+mhe-index’ since they tend to be ephemeral and the
original messages are indexed anyway.

   On some systems (Debian GNU/Linux, for example), use ‘index++’
instead of ‘index’.

15.1.2 swish
------------

In the examples below, replace ‘/home/user/Mail’ with the path to your
MH directory.

   First create the directory ‘/home/user/Mail/.swish’.  Then create the
file ‘/home/user/Mail/.swish/config’ with the following contents:

     DefaultContents TXT*
     IndexDir /home/user/Mail
     IndexFile /home/user/Mail/.swish/index
     IndexName "Mail Index"
     IndexDescription "Mail Index"
     IndexPointer "https://nowhere"
     IndexAdmin "nobody"
     #MetaNames automatic
     IndexReport 3
     FollowSymLinks no
     UseStemming no
     IgnoreTotalWordCountWhenRanking yes
     WordCharacters abcdefghijklmnopqrstuvwxyz0123456789-
     BeginCharacters abcdefghijklmnopqrstuvwxyz
     EndCharacters abcdefghijklmnopqrstuvwxyz0123456789
     IgnoreLimit 50 1000
     IndexComments 0
     FileRules filename contains \D
     FileRules pathname contains /home/user/Mail/.swish
     FileRules pathname contains /home/user/Mail/mhe-index
     FileRules filename is index

   This configuration does not index the folders that hold the results
of your searches in ‘+mhe-index’ since they tend to be ephemeral and the
original messages are indexed anyway.

   If there are any directories you would like to ignore, append lines
like the following to ‘config’:

     FileRules pathname contains /home/user/Mail/scripts

   Use the following command line to generate the swish index.  Run this
daily from cron:

     swish-e -c /home/user/Mail/.swish/config

15.1.3 mairix
-------------

In the examples below, replace ‘~/Mail’ with the path to your MH
directory.

   First create the directory ‘~/Mail/.mairix’.  Then create the file
‘~/Mail/.mairix/config’ with the following contents:

     base=~/Mail

     # List of folders that should be indexed. 3 dots at the end means there
     # are subfolders within the folder
     mh=archive...:inbox:drafts:news:sent:trash

     mformat=mh
     database=~/Mail/.mairix/database

   Use the following command line to generate the mairix index.  Run
this daily from cron:

     mairix -f ~/Mail/.mairix/config

15.1.4 namazu
-------------

In the examples below, replace ‘/home/user/Mail’ with the path to your
MH directory.

   First create the directory ‘/home/user/Mail/.namazu’.  Then create
the file ‘/home/user/Mail/.namazu/mknmzrc’ with the following contents:

     package conf;  # Don't remove this line!
     $ADDRESS = 'user@localhost';
     $ALLOW_FILE = "[0-9]*";
     $EXCLUDE_PATH = "^/home/user/Mail/(mhe-index|spam)";

   This configuration does not index the folders that hold the results
of your searches in ‘+mhe-index’ since they tend to be ephemeral and the
original messages are indexed anyway.

   Use the following command line to generate the namazu index.  Run
this daily from cron:

     mknmz -f /home/user/Mail/.namazu/mknmzrc -O /home/user/Mail/.namazu \
           -q /home/user/Mail

15.1.5 pick
-----------

This search method does not require any setup.

   Read ‘pick’(1) or the section Finding Messages with pick
(https://rand-mh.sourceforge.io/book//finpic.html) in the MH book to
find out more about how to enter the criteria.

15.1.6 grep
-----------

This search method does not require any setup.

   Unlike the other search methods, this method does not use the
MH-Search buffer.  Instead, you simply enter a regular expression in the
minibuffer.  For help in constructing regular expressions, see your man
page for ‘grep’.


File: mh-e.info,  Node: Threading,  Next: Limits,  Prev: Searching,  Up: Top

16 Viewing Message Threads
**************************

MH-E groups messages by “threads” which are messages that are part of
the same discussion and usually all have the same ‘Subject:’ header
field.  Other ways to organize messages in a folder include limiting
(*note Limits::) or using full-text indexed searches (*note
Searching::).

   A thread begins with a single message called a “root”.  All replies
to the same message are “siblings” of each other.  Any message that has
replies to it is an “ancestor” of those replies.

   There are several commands that you can use to navigate and operate
on threads.

‘T ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘T o’
     Refile (output) thread into folder (‘mh-thread-refile’).
‘T d’
     Delete thread (‘mh-thread-delete’).
‘T t’
     Toggle threaded view of folder (‘mh-toggle-threads’).
‘T n’
     Display next sibling (‘mh-thread-next-sibling’).
‘T p’
     Display previous sibling (‘mh-thread-previous-sibling’).
‘T u’
     Display ancestor of current message (‘mh-thread-ancestor’).

   The ‘mh-thread’ customization group contains one option.

‘mh-show-threads-flag’
     On means new folders start in threaded mode (default: ‘off’).

   Threading large number of messages can be time consuming so the
option ‘mh-show-threads-flag’ is turned off by default.  If you turn on
this option, then threading will be done only if the number of messages
being threaded is less than ‘mh-large-folder’.  In any event, threading
can be turned on (and off) with the command ‘T t’ (‘mh-toggle-threads’).

   There are a few commands to help you navigate threads.  If you do not
care for the way a particular thread has turned, you can move up the
chain of messages with the command ‘T u’ (‘mh-thread-ancestor’.  At any
point you can use ‘T n’ (‘mh-thread-next-sibling’ or ‘T p’
(‘mh-thread-previous-sibling’) to jump to the next or previous sibling,
skipping the sub-threads.  The command ‘T u’ can also take a prefix
argument to jump to the message that started everything.

   There are threaded equivalents for the commands that delete and
refile messages.  For example, ‘T o’ (‘mh-thread-refile’) refiles the
current message and all its children.  Similarly, the command ‘T d’
(‘mh-thread-delete’) deletes the current message and all its children.
These commands do not refile or delete sibling messages.  *Note
Navigating::, for a description of the similar command ‘k’
(‘mh-delete-subject-or-thread’).

   If you find that threading is too slow, it may be that you have
‘mh-large-folder’ set too high.  Also, threading is one of the few
features of MH-E that really benefits from compiling.  If you haven’t
compiled MH-E, I encourage you to do so(1).

   ---------- Footnotes ----------

   (1) If you’re not sure if MH-E has been byte-compiled, you could try
running ‘locate mh-thread.elc’ or otherwise find MH-E on your system and
ensure that ‘mh-thread.elc’ exists.  If you have multiple versions and
you find that one is compiled but the other is not, then go into your
‘*scratch*’ buffer in Emacs, enter ‘load-path C-j’, and ensure that the
byte-compiled version appears first in the ‘load-path’.  If you find
that MH-E is not compiled and you installed MH-E yourself, please refer
to the installation directions in the file ‘README’ in the distribution.


File: mh-e.info,  Node: Limits,  Next: Sequences,  Prev: Threading,  Up: Top

17 Limiting Display
*******************

Another way to organize messages in a folder besides threading (*note
Threading::) or using full-text indexed searches (*note Searching::) is
by limiting the folder display to messages that are similar to the
current message.

‘/ ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘/ '’
     Limit to messages in the ‘tick’ sequence (‘mh-narrow-to-tick’).
‘/ c’
     Limit to messages with the same ‘Cc:’ field (‘mh-narrow-to-cc’).
‘/ m’
     Limit to messages with the same ‘From:’ field
     (‘mh-narrow-to-from’).
‘/ g’
     Limit to range (‘mh-narrow-to-range’).
‘/ s’
     Limit to messages with the same ‘Subject:’ field
     (‘mh-narrow-to-subject’).
‘/ t’
     Limit to messages with the same ‘To:’ field (‘mh-narrow-to-to’).
‘/ w’
     Remove last restriction (‘mh-widen’).

   All of the limiting commands above refine the display in some way.

   The commands ‘/ c’ (‘mh-narrow-to-cc’), ‘/ m’ (‘mh-narrow-to-from’),
‘/ s’ (‘mh-narrow-to-subject’), and ‘/ t’ (‘mh-narrow-to-to’) restrict
the display to messages matching the content of the respective field in
the current message.  However, you can give any of these a prefix
argument to edit the ‘pick’ expression used to narrow the view(1).

   You can also limit the display to messages in the ‘tick’ sequence
with the command ‘/ '’ (‘mh-narrow-to-tick’).  *Note Sequences::, for
information on putting message into the ‘tick’ sequence.  Use the ‘/ g’
(‘mh-narrow-to-range’) command to limit the display to messages in a
range (*note Ranges::).

   Each limit can be undone in turn with the ‘/ w’ (‘mh-widen’) command.
Give this command a prefix argument to remove all limits.

   ---------- Footnotes ----------

   (1) See ‘pick’(1) or the section Finding Messages with pick
(https://rand-mh.sourceforge.io/book//finpic.html) in the MH book.


File: mh-e.info,  Node: Sequences,  Next: Junk,  Prev: Limits,  Up: Top

18 Using Sequences
******************

For the whole scoop on MH sequences, refer to ‘mh-sequence’(5)(1).  As
you’ve read, several of the MH-E commands can operate on a sequence,
which is a shorthand for a range or group of messages.  For example, you
might want to forward several messages to a friend or colleague.  Here’s
how to manipulate sequences.  These commands are also available in the
‘Sequence’ menu.

‘'’
     Toggle tick mark of range (‘mh-toggle-tick’).
‘S ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘S '’
     Limit to ticked messages (‘mh-narrow-to-tick’).
‘S d’
     Delete range from sequence (‘mh-delete-msg-from-seq’).
‘S k’
     Delete sequence (‘mh-delete-seq’).
‘S l’
     List all sequences in folder (‘mh-list-sequences’).
‘S n’
     Restrict display to messages in sequence (‘mh-narrow-to-seq’).
‘S p’
     Add range to sequence (‘mh-put-msg-in-seq’).
‘S s’
     Display the sequences in which the current message appears
     (‘mh-msg-is-in-seq’).
‘S w’
     Remove last restriction (‘mh-widen’).
‘M-x mh-update-sequences’
     Flush MH-E’s state out to MH.

   The ‘mh-sequences’ customization group contains the options
associated with sequences.

‘mh-refile-preserves-sequences-flag’
     On means that sequences are preserved when messages are refiled
     (default: ‘on’).
‘mh-tick-seq’
     The name of the MH sequence for ticked messages (default: ‘'tick’).
‘mh-update-sequences-after-mh-show-flag’
     On means flush MH sequences to disk after message is shown
     (default: ‘on’).
‘mh-allowlist-preserves-sequences-flag’
     On means that sequences are preserved when messages are allowlisted
     (default: ‘on’).

   The following hook is available.

‘mh-unseen-updated-hook’
     Hook run after the unseen sequence has been updated (default:
     ‘nil’).

   To place a message in a sequence, use ‘S p’ (‘mh-put-msg-in-seq’).
Give ‘S p’ a range and you can add all the messages in a sequence to
another sequence (for example, ‘C-u S p SourceSequence <RET>
DestSequence <RET>’, *note Ranges::).

   One specific use of the ‘S p’ command is ‘'’ (‘mh-toggle-tick’) which
adds messages to the ‘tick’ sequence.  This sequence can be viewed later
with the ‘F '’ (‘mh-index-ticked-messages’) command (*note Folders::).

   You can customize the option ‘mh-tick-seq’ if you already use the
‘tick’ sequence for your own use.  You can also disable all of the
ticking functions by choosing the ‘Disable Ticking’ item but there isn’t
much advantage to that.

   Once you’ve placed some messages in a sequence, you may wish to
narrow the field of view to just those messages in the sequence you’ve
created.  To do this, use ‘S n’ (‘mh-narrow-to-seq’).  You are prompted
for the name of the sequence.  What this does is show only those
messages that are in the selected sequence in the MH-Folder buffer.  In
addition, it limits further MH-E searches to just those messages.  To
narrow the view to the messages in the ‘tick’ sequence, use ‘S '’
(‘mh-narrow-to-tick’).  When you want to widen the view to all your
messages again, use ‘S w’ (‘mh-widen’).

   You can see which sequences in which a message appears with the
command ‘S s’ (‘mh-msg-is-in-seq’).  Use a prefix argument to display
the sequences in which another message appears (as in ‘C-u 42 S s
<RET>’).  Or, you can list all sequences in a selected folder (default
is current folder) with ‘S l’ (‘mh-list-sequences’).  The list appears
in a buffer named ‘*MH-E Sequences*’ (*note Miscellaneous::).

   If a message is in any sequence (except ‘Previous-Sequence:’(2) and
‘cur’) when it is refiled, then it will still be in those sequences in
the destination folder.  If this behavior is not desired, then turn off
the option ‘mh-refile-preserves-sequences-flag’.

   If you want to remove a message (or range, *note Ranges::) from a
sequence, use ‘S d’ (‘mh-delete-msg-from-seq’).  If you want to delete
an entire sequence, use ‘S k’ (‘mh-delete-seq’).  In the latter case you
are prompted for the sequence to delete.  Note that this deletes only
the sequence, not the messages in the sequence.  If you want to delete
the messages, use ‘C-u d’ (*note Reading Mail::).

   Three sequences are maintained internally by MH-E and pushed out to
MH when a message is shown.  They include the sequence specified by your
‘Unseen-Sequence:’ profile component, ‘cur’, and the sequence listed by
the option ‘mh-tick-seq’ which is ‘tick’ by default.  If you do not like
this behavior, turn off the option
‘mh-update-sequences-after-mh-show-flag’.  You can then update the state
manually with the ‘x’, ‘q’, or ‘M-x mh-update-sequences’ commands.

   The hook ‘mh-unseen-updated-hook’ is run after the unseen sequence
has been updated.  The variable ‘mh-seen-list’ can be used by this hook
to obtain the list of messages which were removed from the unseen
sequence.

   With the exceptions of ‘S n’ and ‘S w’, the underlying MH command
dealing with sequences is ‘mark’(3).

   ---------- Footnotes ----------

   (1) See the section More About Sequences
(https://rand-mh.sourceforge.io/book//morseq.html) in the MH book.

   (2) See ‘mh-profile’(5)).

   (3) See the section Make Message Bookmarks with mark
(https://rand-mh.sourceforge.io/book//mmbwm.html) in the MH book.


File: mh-e.info,  Node: Junk,  Next: Miscellaneous,  Prev: Sequences,  Up: Top

19 Dealing With Junk Mail
*************************

Marshall Rose once wrote a paper on MH entitled, ‘How to process 200
messages a day and still get some real work done’.  This chapter could
be entitled, ‘How to process 1000 spams a day and still get some real
work done’.

   We use the terms “junk mail” and “spam” interchangeably for any
unwanted message which includes spam, “viruses”, and “worms”.  The
opposite of spam is “ham”.  The act of classifying a sender as one who
sends junk mail is called “blocklisting”; the opposite is called
“allowlisting”.

‘J ?’
     Display cheat sheet for the commands of the current prefix in
     minibuffer (‘mh-prefix-help’).
‘J b’
     Blocklist range as spam (‘mh-junk-blocklist’).
‘J a’
     Allowlist range as ham (‘mh-junk-allowlist’).
‘mh-spamassassin-identify-spammers’
     Identify spammers who are repeat offenders.

   The following table lists the options from the ‘mh-junk’
customization group.

‘mh-junk-background’
     If on, spam programs are run in background (default: ‘off’).
‘mh-junk-disposition’
     Disposition of junk mail (default: ‘Delete Spam’).
‘mh-junk-program’
     Spam program that MH-E should use (default: ‘Auto-detect’).

   The following option in the ‘mh-sequences’ customization group is
also available.

‘mh-allowlist-preserves-sequences-flag’
     On means that sequences are preserved when messages are allowlisted
     (default: ‘on’).

   The following hooks are available.

‘mh-blocklist-msg-hook’
     Hook run by ‘J b’ (‘mh-junk-blocklist’) after marking each message
     for blocklisting (default: ‘nil’).
‘mh-allowlist-msg-hook’
     Hook run by ‘J a’ (‘mh-junk-allowlist’) after marking each message
     for allowlisting (default ‘nil’).

   The following faces are available.

‘mh-folder-blocklisted’
     Blocklisted message face.
‘mh-folder-allowlisted’
     Allowlisted message face

   MH-E depends on SpamAssassin (https://spamassassin.apache.org/),
bogofilter (http://bogofilter.sourceforge.net/), or SpamProbe
(http://spamprobe.sourceforge.net/) to throw the dreck away.  This
chapter describes briefly how to configure these programs to work well
with MH-E and how to use MH-E’s interface that provides continuing
education for these programs.

   The default setting of the option ‘mh-junk-program’ is ‘Auto-detect’
which means that MH-E will automatically choose one of SpamAssassin,
bogofilter, or SpamProbe in that order.  If, for example, you have both
SpamAssassin and bogofilter installed and you want to use bogofilter,
then you can set this option to ‘Bogofilter’.

   The command ‘J b’ (‘mh-junk-blocklist’) trains the spam program in
use with the content of the range (*note Ranges::) and then handles the
message(s) as specified by the option ‘mh-junk-disposition’.  By
default, this option is set to ‘Delete Spam’ but you can also specify
the name of the folder which is useful for building a corpus of spam for
training purposes.

   In contrast, the command ‘J a’ (‘mh-junk-allowlist’) reclassifies a
range of messages (*note Ranges::) as ham if it were incorrectly
classified as spam.  It then refiles the message into the ‘+inbox’
folder.

   If a message is in any sequence (except ‘Previous-Sequence:’ and
‘cur’) when it is allowlisted, then it will still be in those sequences
in the destination folder.  If this behavior is not desired, then turn
off the option ‘mh-allowlist-preserves-sequences-flag’.

   By default, the programs are run in the foreground, but this can be
slow when junking large numbers of messages.  If you have enough memory
or don’t junk that many messages at the same time, you might try turning
on the option ‘mh-junk-background’.  (1)

   The following sections discuss the various counter-spam measures that
MH-E can work with.

SpamAssassin
------------

SpamAssassin is one of the more popular spam filtering programs.  Get it
from your local distribution or from the SpamAssassin web site
(https://spamassassin.apache.org/).

   To use SpamAssassin, add the following recipes to ‘~/.procmailrc’:

     PATH=$PATH:/usr/bin/mh
     MAILDIR=$HOME/`mhparam Path`

     # Fight spam with SpamAssassin.
     :0fw
     | spamc

     # Anything with a spam level of 10 or more is junked immediately.
     :0:
     * ^X-Spam-Level: ..........
     /dev/null

     :0:
     * ^X-Spam-Status: Yes
     spam/.

   If you don’t use ‘spamc’, use ‘spamassassin -P -a’.

   Note that one of the recipes above throws away messages with a score
greater than or equal to 10.  Here’s how you can determine a value that
works best for you.

   First, run ‘spamassassin -t’ on every mail message in your archive
and use ‘gnumeric’ to verify that the average plus the standard
deviation of good mail is under 5, the SpamAssassin default for “spam”.

   Using ‘gnumeric’, sort the messages by score and view the messages
with the highest score.  Determine the score which encompasses all of
your interesting messages and add a couple of points to be conservative.
Add that many dots to the ‘X-Spam-Level:’ header field above to send
messages with that score down the drain.

   In the example above, messages with a score of 5–9 are set aside in
the ‘+spam’ folder for later review.  The major weakness of rules-based
filters is a plethora of false positives so it is worthwhile to check.

   If SpamAssassin classifies a message incorrectly, or is unsure, you
can use the MH-E commands ‘J b’ (‘mh-junk-blocklist’) and ‘J a’
(‘mh-junk-allowlist’).

   The command ‘J b’ (‘mh-junk-blocklist’) adds a ‘blacklist_from’ entry
to ‘~/spamassassin/user_prefs’, deletes the message, and sends the
message to the Razor, so that others might not see this spam.  If the
‘sa-learn’ command is available, the message is also recategorized as
spam.

   The command‘J a’ (‘mh-junk-allowlist’) adds a ‘whitelist_from’ rule
to ‘~/.spamassassin/user_prefs’.  If the ‘sa-learn’ command is
available, the message is also recategorized as ham.

   Over time, you’ll observe that the same host or domain occurs
repeatedly in the ‘blacklist_from’ entries, so you might think that you
could avoid future spam by blocklisting all mail from a particular
domain.  The utility function ‘mh-spamassassin-identify-spammers’ helps
you do precisely that.  This function displays a frequency count of the
hosts and domains in the ‘blacklist_from’ entries from the last blank
line in ‘~/.spamassassin/user_prefs’ to the end of the file.  This
information can be used so that you can replace multiple
‘blacklist_from’ entries with a single wildcard entry such as:

     blacklist_from *@*amazingoffersdirect2u.com

   In versions of SpamAssassin (2.50 and on) that support a Bayesian
classifier, ‘J b’ ‘(mh-junk-blocklist’) uses the program ‘sa-learn’ to
recategorize the message as spam.  Neither MH-E, nor SpamAssassin,
rebuilds the database after adding words, so you will need to run
‘sa-learn --rebuild’ periodically.  This can be done by adding the
following to your ‘crontab’:

     0 * * * *       sa-learn --rebuild > /dev/null 2>&1

Bogofilter
----------

Bogofilter is a Bayesian spam filtering program.  Get it from your local
distribution or from the bogofilter web site
(http://bogofilter.sourceforge.net/).

   Bogofilter is taught by running:

     bogofilter -n < good-message

   on every good message, and

     bogofilter -s < spam-message

   on every spam message.  This is called a “full training”; three other
training methods are described in the FAQ that is distributed with
bogofilter.  Note that most Bayesian filters need 1000 to 5000 of each
type of message to start doing a good job.

   To use bogofilter, add the following recipes to ‘~/.procmailrc’:

     PATH=$PATH:/usr/bin/mh
     MAILDIR=$HOME/`mhparam Path`

     # Fight spam with Bogofilter.
     :0fw
     | bogofilter -3 -e -p

     :0:
     * ^X-Bogosity: Yes, tests=bogofilter
     spam/.

     :0:
     * ^X-Bogosity: Unsure, tests=bogofilter
     spam/unsure/.

   If bogofilter classifies a message incorrectly, or is unsure, you can
use the MH-E commands ‘J b’ (‘mh-junk-blocklist’) and ‘J a’
(‘mh-junk-allowlist’) to update bogofilter’s training.

   The ‘Bogofilter FAQ’ suggests that you run the following occasionally
to shrink the database:

     bogoutil -d wordlist.db | bogoutil -l wordlist.db.new
     mv wordlist.db wordlist.db.prv
     mv wordlist.db.new wordlist.db

   The ‘Bogofilter tuning HOWTO’ describes how you can fine-tune
bogofilter.

SpamProbe
---------

SpamProbe is a Bayesian spam filtering program.  Get it from your local
distribution or from the SpamProbe web site
(http://spamprobe.sourceforge.net).

   To use SpamProbe, add the following recipes to ‘~/.procmailrc’:

     PATH=$PATH:/usr/bin/mh
     MAILDIR=$HOME/`mhparam Path`

     # Fight spam with SpamProbe.
     :0
     SCORE=| spamprobe receive

     :0 wf
     | formail -I "X-SpamProbe: $SCORE"

     :0:
     *^X-SpamProbe: SPAM
     spam/.

   If SpamProbe classifies a message incorrectly, you can use the MH-E
commands ‘J b’ (‘mh-junk-blocklist’) and ‘J a’ (‘mh-junk-allowlist’) to
update SpamProbe’s training.

Other Things You Can Do
-----------------------

There are a couple of things that you can add to ‘~/.procmailrc’ in
order to filter out a lot of spam and viruses.  The first is to
eliminate any message with a Windows executable (which is most likely a
virus).  The second is to eliminate mail in character sets that you
can’t read.

     PATH=$PATH:/usr/bin/mh
     MAILDIR=$HOME/`mhparam Path`

     #
     # Filter messages with w32 executables/virii.
     #
     # These attachments are base64 and have a TVqQAAMAAAAEAAAA//8AALg
     # pattern. The string "this program cannot be run in MS-DOS mode"
     # encoded in base64 is 4fug4AtAnNIbg and helps to avoid false
     # positives (Roland Smith via Pete from the bogofilter mailing list).
     #
     :0 B:
     * ^Content-Transfer-Encoding:.*base64
     * ^TVqQAAMAAAAEAAAA//8AALg
     * 4fug4AtAnNIbg
     spam/exe/.

     #
     # Filter mail in unreadable character sets (from the Bogofilter FAQ).
     #
     UNREADABLE='[^?"]*big5|iso-2022-jp|ISO-2022-KR|euc-kr|gb2312|ks_c_5601-1987'

     :0:
     * 1^0 $ ^Subject:.*=\?($UNREADABLE)
     * 1^0 $ ^Content-Type:.*charset="?($UNREADABLE)
     spam/unreadable/.

     :0:
     * ^Content-Type:.*multipart
     * B ?? $ ^Content-Type:.*^?.*charset="?($UNREADABLE)
     spam/unreadable/.

   ---------- Footnotes ----------

   (1) Note that the option ‘mh-junk-background’ is used as the
‘destination’ argument in the call to ‘call-process’.  Therefore,
turning on this option means setting its value to ‘0’.  You can also set
its value to ‘t’ to direct the programs’ output to the ‘*MH-E Log*’
buffer; this may be useful for debugging.


File: mh-e.info,  Node: Miscellaneous,  Next: Scan Line Formats,  Prev: Junk,  Up: Top

20 Miscellaneous Commands, Variables, and Buffers
*************************************************

This chapter covers the following command and the various MH-E buffers,

‘mh-version’
     Display version information about MH-E and the MH mail handling
     system.

   One command worth noting is ‘M-x mh-version’.  You can compare the
version this command prints to the latest release (*note Getting
MH-E::).  The output of ‘M-x mh-version’, found in a buffer named ‘*MH-E
Info*’, should usually be included with any bug report you submit (*note
Bug Reports::).

MH-E Buffers
------------

Besides the MH-Folder, MH-Show, and MH-Letter buffers, MH-E creates
several other buffers.  They are:

‘*MH-E Folders*’
     This buffer contains the output of ‘F l’ (‘mh-list-folders’).
     *Note Folders::.
‘*MH-E Help*’
     This buffer contains the output of ‘?’ (‘mh-help’) and ‘C-c ?’ in
     MH-Letter mode.  *Note Using This Manual::.
‘*MH-E Info*’
     This buffer contains the output of ‘M-x mh-version <RET>’.
‘*MH-E Log*’
     This buffer contains the last 100 lines of the output of the
     various MH commands.
‘*MH-E Mail Delivery*’
     This buffer contains the transcript of a mail delivery.  *Note
     Sending Message::.
‘*MH-E Recipients*’
     This buffer contains the output of ‘C-c C-w’ (‘mh-check-whom’) and
     is killed when draft is sent.  *Note Checking Recipients::.
‘*MH-E Sequences*’
     This buffer contains the output of ‘S l’ (‘mh-list-sequences’).
     *Note Sequences::.
‘*mh-temp*’
     This is a scratch, ephemeral, buffer used by MH-E functions.  Note
     that it is hidden because the first character in the name is a
     space.  You’ll generally not have any need for this buffer.


File: mh-e.info,  Node: Scan Line Formats,  Next: Procmail,  Prev: Miscellaneous,  Up: Top

Appendix A Scan Line Formats
****************************

This appendix discusses how MH-E creates, parses, and manipulates scan
lines.  If you have your own MH scan or inc format files, you *can*
teach MH-E how to handle them, but it isn’t easy as you’ll see.

   This table lists the options in the ‘mh-scan-line-formats’
customization group.

‘mh-adaptive-cmd-note-flag’
     On means that the message number width is determined dynamically
     (default: ‘on’).
‘mh-scan-format-file’
     Specifies the format file to pass to the scan program (default:
     ‘Use MH-E scan Format’).
‘mh-scan-prog’
     Program used to scan messages (default: ‘"scan"’).

   There are a couple of caveats when creating your own scan format
file.  First, MH-E will not work if your scan lines do not include
message numbers.  It will work poorly if you don’t dedicate a column for
showing the current message and notations.  It is also best to keep the
first column empty to make room for the cursor and so that text isn’t
obscured by the current message’s overlay arrow when running in a
terminal.  You won’t be able to use the option
‘mh-adaptive-cmd-note-flag’ or the threading features (*note
Threading::).

   If you’ve created your own format to handle long message numbers,
you’ll be pleased to know you no longer need it since MH-E adapts its
internal format based upon the largest message number if
‘mh-adaptive-cmd-note-flag’ is on (the default).  If you prefer
fixed-width message numbers, turn off ‘mh-adaptive-cmd-note-flag’ and
call ‘mh-set-cmd-note’ with the width specified by your format file (see
‘mh-scan-format-file’).  For example, the default width is 4, so you
would use ‘(mh-set-cmd-note 4)’.

   The default setting for ‘mh-scan-format-file’ is ‘Use MH-E scan
Format’.  This means that the format string will be taken from either
‘mh-scan-format-mh’ or ‘mh-scan-format-nmh’ depending on whether MH or
nmh (or GNU mailutils MH) is in use.  This setting also enables you to
turn on the option ‘mh-adaptive-cmd-note-flag’.  You can also set this
option to ‘Use Default scan Format’ to get the same output as you would
get if you ran ‘scan’ from the shell.  If you have a format file that
you want MH-E to use but not MH, you can set this option to ‘Specify a
scan Format File’ and enter the name of your format file.

   The scan format that MH-E uses when ‘mh-scan-format-file’ is set to
its default of ‘Use MH-E scan Format’ is held in the variables
‘mh-scan-format-nmh’ and ‘mh-scan-format-mh’ depending on whether you
are using nmh (or GNU mailutils MH) or not.  Typically, you create your
own format files rather than modifying these variables.  The value of
‘mh-scan-format-nmh’ is:

     (concat
      "%4(msg)"
      "%<(cur)+%| %>"
      "%<{replied}-"
      "%?(nonnull(comp{to}))%<(mymbox{to})t%>"
      "%?(nonnull(comp{cc}))%<(mymbox{cc})c%>"
      "%?(nonnull(comp{bcc}))%<(mymbox{bcc})b%>"
      "%?(nonnull(comp{newsgroups}))n%>"
      "%<(zero) %>"
      "%02(mon{date})/%02(mday{date})%<{date} %|*%>"
      "%<(mymbox{from})%<{to}To:%14(decode(friendly{to}))%>%>"
      "%<(zero)%17(decode(friendly{from}))%>  "
      "%(decode{subject})%<{body}<<%{body}%>")

   The setting for ‘mh-scan-format-mh’ is similar, except that MH
doesn’t have the function ‘decode’ (which is used to decode RFC 2047
encodings).

   These strings are passed to the ‘scan’ program via the ‘-format’
argument.  The formats are identical to the defaults except that
additional hints for fontification have been added to the existing
notations in the fifth column (remember that in Emacs, the columns start
at 0).  The values of the fifth column, in priority order, are: ‘-’ if
the message has been replied to, ‘t’ if an address in the ‘To:’ field
matches one of the mailboxes of the current user, ‘c’ if the ‘Cc:’ field
matches, ‘b’ if the ‘Bcc:’ field matches, and ‘n’ if a non-empty
‘Newsgroups:’ field is present.

   The name of the program that generates a listing of one line per
message is held in ‘mh-scan-prog’ (default: ‘"scan"’).  Unless this
variable contains an absolute pathname, it is assumed to be in the
‘mh-progs’ directory (*note Getting Started::).  You may link another
program to ‘scan’ (see ‘mh-profile’(5)) to produce a different type of
listing(1).

   If you change the format of the scan lines you’ll need to tell MH-E
how to parse the new format.  As you will see, quite a lot of variables
are involved to do that.  Use ‘M-x apropos <RET> mh-scan.*regexp <RET>’
to obtain a list of these variables.  You will also have to call
‘mh-set-cmd-note’ if your notations are not in column 4 (columns in
Emacs start with 0).  Note that unlike most of the user options
described in this manual, these are variables and must be set with
‘setq’ instead of in a customization buffer.  For help with regular
expressions, see *note Syntax of Regular Expressions: (emacs)Regexps.

   The first variable has to do with pruning out garbage.

‘mh-scan-valid-regexp’
     This regular expression describes a valid scan line.  This is used
     to eliminate error messages that are occasionally produced by
     ‘inc’(2) or ‘scan’ (default: ‘"^ *[0-9]"’).

   Next, many variables control how the scan lines are parsed.

‘mh-scan-body-regexp’
     This regular expression matches the message body fragment.  Note
     that the default setting of ‘mh-folder-font-lock-keywords’ expects
     this expression to contain at least one parenthesized expression
     which matches the body text as in the default of
     ‘"\\(<<\\([^\n]+\\)?\\)"’.  If this regular expression is not
     correct, the body fragment will not be highlighted with the face
     ‘mh-folder-body’.
‘mh-scan-cur-msg-number-regexp’
     This regular expression matches the current message.  It must match
     from the beginning of the line.  Note that the default setting of
     ‘mh-folder-font-lock-keywords’ expects this expression to contain
     at least one parenthesized expression which matches the message
     number as in the default of ‘"^\\( *[0-9]+\\+\\).*"’.  This
     expression includes the leading space and current message marker
     ‘+’ within the parenthesis since it looks better to highlight these
     items as well.  The highlighting is done with the face
     ‘mh-folder-cur-msg-number’.  This regular expression should be
     correct as it is needed by non-fontification functions.  See also
     ‘mh-note-cur’.
‘mh-scan-date-regexp’
     This regular expression matches a valid date.  It must *not* be
     anchored to the beginning or the end of the line.  Note that the
     default setting of ‘mh-folder-font-lock-keywords’ expects this
     expression to contain only one parenthesized expression which
     matches the date field as in the default of
     ‘"\\([0-9][0-9]/[0-9][0-9]\\)"’.  If this regular expression is not
     correct, the date will not be highlighted with the face
     ‘mh-folder-date’.
‘mh-scan-deleted-msg-regexp’
     This regular expression matches deleted messages.  It must match
     from the beginning of the line.  Note that the default setting of
     ‘mh-folder-font-lock-keywords’ expects this expression to contain
     at least one parenthesized expression which matches the message
     number as in the default of ‘"^\\( *[0-9]+\\)D"’.  This expression
     includes the leading space within the parenthesis since it looks
     better to highlight it as well.  The highlighting is done with the
     face ‘mh-folder-deleted’.  This regular expression should be
     correct as it is needed by non-fontification functions.  See also
     ‘mh-note-deleted’.
‘mh-scan-good-msg-regexp’
     This regular expression matches “good” messages.  It must match
     from the beginning of the line.  Note that the default setting of
     ‘mh-folder-font-lock-keywords’ expects this expression to contain
     at least one parenthesized expression which matches the message
     number as in the default of ‘"^\\( *[0-9]+\\)[^D^0-9]"’.  This
     expression includes the leading space within the parenthesis since
     it looks better to highlight it as well.  The highlighting is done
     with the face ‘mh-folder-msg-number’.  This regular expression
     should be correct as it is needed by non-fontification functions.
‘mh-scan-msg-format-regexp’
     This regular expression finds the message number width in a scan
     format.  Note that the message number must be placed in a
     parenthesized expression as in the default of
     ‘"%\\([0-9]*\\)(msg)"’.  This variable is only consulted if
     ‘mh-scan-format-file’ is set to ‘Use MH-E scan Format’.
‘mh-scan-msg-format-string’
     This is a format string for the width of the message number in a
     scan format.  Use ‘0%d’ for zero-filled message numbers.  This
     variable is only consulted if ‘mh-scan-format-file’ is set to ‘Use
     MH-E scan Format’ (default: ‘"%d"’).
‘mh-scan-msg-number-regexp’
     This regular expression extracts the message number.  It must match
     from the beginning of the line.  Note that the message number must
     be placed in a parenthesized expression as in the default of
     ‘"^ *\\([0-9]+\\)"’.
‘mh-scan-msg-overflow-regexp’
     This regular expression matches overflowed message numbers
     (default: ‘"^[?0-9][0-9]"’).
‘mh-scan-msg-search-regexp’
     This regular expression matches a particular message.  It is a
     format string; use ‘%d’ to represent the location of the message
     number within the expression as in the default of
     ‘"^[^0-9]*%d[^0-9]"’.
‘mh-scan-rcpt-regexp’
     This regular expression specifies the recipient in messages you
     sent.  Note that the default setting of
     ‘mh-folder-font-lock-keywords’ expects this expression to contain
     two parenthesized expressions.  The first is expected to match the
     ‘To:’ that the default scan format file generates.  The second is
     expected to match the recipient’s name as in the default of
     ‘"\\(To:\\)\\(..............\\)"’.  If this regular expression is
     not correct, the ‘To:’ string will not be highlighted with the face
     ‘mh-folder-to’ and the recipient will not be highlighted with the
     face ‘mh-folder-address’.
‘mh-scan-refiled-msg-regexp’
     This regular expression matches refiled messages.  It must match
     from the beginning of the line.  Note that the default setting of
     ‘mh-folder-font-lock-keywords’ expects this expression to contain
     at least one parenthesized expression which matches the message
     number as in the default of ‘"^\\( *[0-9]+\\)\\^"’.  This
     expression includes the leading space within the parenthesis since
     it looks better to highlight it as well.  The highlighting is done
     with the face ‘mh-folder-refiled’.  This regular expression should
     be correct as it is needed by non-fontification functions.  See
     also ‘mh-note-refiled’.
‘mh-scan-sent-to-me-sender-regexp’
     This regular expression matches messages sent to us.  Note that the
     default setting of ‘mh-folder-font-lock-keywords’ expects this
     expression to contain at least two parenthesized expressions.  The
     first should match the fontification hint (see
     ‘mh-scan-format-nmh’) and the second should match the user name as
     in the default of
     ‘"^ *[0-9]+.\\([bct]\\).....[ ]*\\(..................\\)"’.  If
     this regular expression is not correct, the notation hints will not
     be highlighted with the face ‘mh-mh-folder-sent-to-me-hint’ and the
     sender will not be highlighted with the face
     ‘mh-folder-sent-to-me-sender’.
‘mh-scan-subject-regexp’
     This regular expression matches the subject.  It must match from
     the beginning of the line.  Note that the default setting of
     ‘mh-folder-font-lock-keywords’ expects this expression to contain
     at least three parenthesized expressions.  The first is expected to
     match the ‘Re:’ string, if any, and is highlighted with the face
     ‘mh-folder-followup’.  The second matches an optional bracketed
     number after ‘Re:’, such as in ‘Re[2]:’ (and is thus a
     sub-expression of the first expression).  The third is expected to
     match the subject line itself which is highlighted with the face
     ‘mh-folder-subject’.  For example, the default is
     ‘"^ *[0-9]+........[ ]*...................’
     ‘\\([Rr][Ee]\\(\\[[0-9]+\\]\\)?:\\s-*\\)*\\([^<\n]*\\)"’.  This
     regular expression should be correct as it is needed by
     non-fontification functions.  Note that this example is broken up
     on two lines for readability, but is actually a single string.

   Finally, there are a slew of variables that control how MH-E
annotates the scan lines.

‘mh-cmd-note’
     Column for notations (default: 4).  This variable should be set
     with the function ‘mh-set-cmd-note’.  This variable may be updated
     dynamically if ‘mh-adaptive-cmd-note-flag’ is on.  The following
     variables contain the notational characters.  Note that columns in
     Emacs start with 0.
‘mh-note-copied’
     Messages that have been copied are marked by this character
     (default: ‘?C’).
‘mh-note-cur’
     The current message (in MH, not in MH-E) is marked by this
     character (default: ‘?+’).  See also
     ‘mh-scan-cur-msg-number-regexp’.
‘mh-note-deleted’
     Messages that have been deleted are marked by this character
     (default: ‘?D’).  See also ‘mh-scan-deleted-msg-regexp’.
‘mh-note-dist’
     Messages that have been redistributed are marked by this character
     (default: ‘?R’).
‘mh-note-forw’
     Messages that have been forwarded are marked by this character
     (default: ‘?F’).
‘mh-note-printed’
     Messages that have been printed are marked by this character
     (default: ‘?P’).
‘mh-note-refiled’
     Messages that have been refiled are marked by this character
     (default: ‘?^’).  See also ‘mh-scan-refiled-msg-regexp’.
‘mh-note-repl’
     Messages that have been replied to are marked by this character
     (default: ‘?-’).
‘mh-note-seq’
     Messages in a user-defined sequence are marked by this character
     (default: ‘?%’).  Messages in the ‘search’ sequence are marked by
     this character as well.

   For example, let’s say I have the following in ‘scan.format’ which
displays the sender, the subject, and the message number.  This format
places a ‘+’ after the message number for the current message according
to MH; it also uses that column for notations.

     %20(decode(friendly{from})) %50(decode{subject})  %4(msg)%<(cur)+%| %>

   The first thing you have to do is tell MH-E to use this file.
Customize ‘mh-scan-format-file’ and set its value to ‘Use Default scan
Format’.  If you didn’t get already turn off
‘mh-adaptive-cmd-note-flag’, you’ll need to do that first.

   Next, tell MH-E what a valid scan line looks like so that you can at
least display the output of scan in your MH-Folder buffer.

     (setq mh-scan-valid-regexp "[0-9]+[+D^ ]$")

   Now, in order to get rid of the ‘Cursor not pointing to message’
message, you need to tell MH-E how to access the message number.  You
should also see why MH-E requires that you include a message number in
the first place.

     (setq mh-scan-msg-number-regexp "^.* \\([0-9]+\\)[+D^ ]$")
     (setq mh-scan-msg-search-regexp " %d[+D^ ]$")

   In order to get the next and previous commands working, add this.

     (setq mh-scan-good-msg-regexp "^.* \\([0-9]+\\)[+D^ ]$")

   Note that the current message isn’t marked with a ‘+’ when moving
between the next and previous messages.  Here is the code required to
get this working.

     (set-mh-cmd-note 76)
     (setq mh-scan-cur-msg-number-regexp "^.* \\([0-9]+\\)\\+$")

   Finally, add the following to delete and refile messages.

     (setq mh-scan-deleted-msg-regexp "^.* \\([0-9]+\\)D$")
     (setq mh-scan-refiled-msg-regexp "^.* \\([0-9]+\\)\\^$")

   This is just a bare minimum; it’s best to adjust all of the regular
expressions to ensure that MH-E and highlighting perform well.

   ---------- Footnotes ----------

   (1) See the section Find and Specify with scan pick Ranges Sequences
(https://rand-mh.sourceforge.io/book//faswsprs.html) in the MH book.

   (2) See the section Reading Mail: inc show next prev
(https://rand-mh.sourceforge.io/book//reapre.html) in the MH book.


File: mh-e.info,  Node: Procmail,  Next: Odds and Ends,  Prev: Scan Line Formats,  Up: Top

Appendix B Reading Mailing Lists Effectively
********************************************

This appendix explains how to use procmail, which can file mail from
mailing lists into folders which can then be read easily with MH-E(1).
Unfortunately, procmail is no longer recommended due to its security
vulnerabilities.  Some mailing lists have such high traffic that Gnus
must be used and I discuss how to use Gnus side-by-side with MH-E.

   First, I’ll describe how to put mail from your mailing lists directly
into an MH folder using ‘procmail’.  First, add the following to
‘~/.procmailrc’.  While the logging variables aren’t strictly necessary,
they are extremely useful.

     [1]  # Update PATH so procmail can find myrcvstore, rcvstore and mhparam.
     [2]  PATH=$PATH:/usr/lib/mh:/usr/bin/mh:$HOME/bin
     [3]
     [4]  # Point LOGFILE at the actual log file.
     [5]  LOGFILE=$HOME/.procmail.log
     [6]
     [7]  # This setting provides just the right amount of information.
     [8]  LOGABSTRACT=all
     [9]
     [10] # Uncomment the following line to see how your patterns match.
     [11] #VERBOSE=yes
     [12]
     [13] # Place mail sent to any MH-E mailing list in +mh-e.
     [14] :0 w: mh-e$LOCKEXT
     [15] * ^TO.*mh-e-.*@.*sourceforge.net
     [16] | myrcvstore -create +mh-e

   Line 14 creates a lock file in your mail directory based upon the
name of the folder.  This is done because ‘rcvstore’ does not perform
locking.  While this lock file will prevent ‘procmail’ from writing to a
folder concurrently, there is a slight chance that you might lose a
message if you’re performing operations on a folder at the same time
‘rcvstore’ is placing a message there.  You have been warned.  Now that
that disclaimer is out of the way, note that I’ve been using this set-up
for over a decade and haven’t lost anything to my knowledge(2).

   Line 16 uses the following script, ‘myrcvstore’, to massage the
message as described in the comment and file the message in the given
folder(3).

     #! /bin/sh

     # Accepts a message on standard input and passes it through rcvstore
     # after first passing it through any filters. All arguments are passed
     # on to rcvstore.

     # Force the "From user date" to become part of header. One reason this
     # is done is because the presence of the From field confuses dist so
     # that dist adds a new header, rather than using the existing header.
     # Note that this should not be done for any message that goes into a
     # Gnus incoming file (Gnus will thrown an error) nor should it be
     # applied to any message that goes to the system mailbox because the
     # entire mailbox will be incorporated as a single message.
     formail -c -z -R 'From ' X-Envelope-From: |
     rcvstore $@

   If your version of ‘rcvstore’ doesn’t add messages to the ‘unseen’
sequence by default, add the following line to your MH profile:

     Unseen-Sequence: unseen

   Now view your new messages with the speedbar (*note Speedbar::) or
with ‘F n’ (‘mh-index-new-messages’).  *Note Folders::.

   If you’re on a mailing list that is so voluminous that it is
impossible to read every message, it usually better to read the mailing
list like a newsgroup in a news reader.  Emacs has a built-in newsreader
called Gnus.  The remainder of this appendix talks about how to use Gnus
with an MH message store.  The version of Gnus that was used to prepare
this manual was 5.10.  Versions 5.8 through 5.10 should work but
versions prior to 5.8 use different options.

   This table contains a list of Gnus options that you will have to
modify.  Note that for them to become accessible, you’ll have to load
‘nnml.el’ first.  This can be done with ‘M-x load-library <RET> nnml
<RET>’.

‘gnus-secondary-select-methods’
     Select the ‘nnml’ value.  This select method uses directories for
     folders and individual files for messages, just like MH.  You do
     not have to set an address.
‘mail-sources’
     Select the ‘Several files in a directory’ value, check the ‘Path’
     box and enter ‘~/Mail’ to tell Gnus where to find your mail.
‘message-mail-user-agent’
     In order to send mail within Gnus using MH-E, set this option to
     ‘mail-user-agent’ and set the ‘mail-user-agent’ option to ‘Emacs
     interface to MH’.
‘nnmail-keep-last-article’
     Since Gnus keeps track of which messages you have read, it would be
     bad if Gnus expired the last message, for example, message 100, and
     ‘rcvstore’ gave the next new message number 1.  Gnus would then
     ignore it since it thinks that you’ve read messages 1–100.  Turning
     on this option ensures that the last message is never removed
     thereby eliminating this problem.

   Next add the following to ‘~/.procmailrc’.  If you don’t subscribe to
the GnuCash mailing list, substitute one to which you are subscribed.

     PATH=$PATH:/usr/bin/mh
     MAILDIR=$HOME/`mhparam Path`
     # Place mail sent to the GnuCash mailing list in gnucash.spool, where
     # Gnus will pick it up.
     :0:
     * ^TO.*gnucash.*@.*gnucash.org
     gnucash.spool

   Wait for some messages to appear in ‘gnucash.spool’ and run Gnus with
‘M-x gnus <RET>’.  To view the folder created in the example above, you
would tell Gnus about it the first time only with ‘G m gnucash <RET>
nnml <RET>’.  In MH-E, this folder is known as ‘+gnucash’.

   ---------- Footnotes ----------

   (1) The MH equivalent, ‘slocal’, can be used as well, but procmail
was more flexible and more packages exist for procmail than for slocal.

   (2) See Savannah issue #4361
(https://savannah.nongnu.org/bugs/?func=detailbug&bug_id=4361&group_id=2166)
to see if ‘rcvstore’ locking is still an issue.

   (3) The ‘-create’ argument wasn’t always the default to ‘rcvstore’.


File: mh-e.info,  Node: Odds and Ends,  Next: History,  Prev: Procmail,  Up: Top

Appendix C Odds and Ends
************************

This appendix covers a few topics that don’t fit elsewhere.  Here I tell
you how to report bugs and how to get on the MH-E mailing lists.  I also
point out some additional sources of information.

* Menu:

* Bug Reports::
* Mailing Lists::
* MH FAQ and Support::
* Getting MH-E::


File: mh-e.info,  Node: Bug Reports,  Next: Mailing Lists,  Up: Odds and Ends

C.1 Bug Reports
===============

Bug reports should be filed at SourceForge
(https://sourceforge.net/p/mh-e/bugs/).  You need to be a SourceForge
user to submit bug reports, but this is easy enough to do that it
shouldn’t be a restriction for you.  Please include the output of ‘M-x
mh-version’ (*note Miscellaneous::) in any bug report you send unless
you’re 110% positive we won’t ask for it.


File: mh-e.info,  Node: Mailing Lists,  Next: MH FAQ and Support,  Prev: Bug Reports,  Up: Odds and Ends

C.2 MH-E Mailing Lists
======================

There are several mailing lists for MH-E.  They are mh-e-users at
lists.sourceforge.net, mh-e-announce at lists.sourceforge.net, and
mh-e-devel at lists.sourceforge.net.  You can subscribe or view the
archives at SourceForge (https://sourceforge.net/p/mh-e/mailman/).  Do
not report bugs on these lists; please submit them via SourceForge
(*note Bug Reports::).


File: mh-e.info,  Node: MH FAQ and Support,  Next: Getting MH-E,  Prev: Mailing Lists,  Up: Odds and Ends

C.3 MH FAQ and Support
======================

The article ‘MH Frequently Asked Questions (FAQ) with Answers’
(http://www.newt.com/faq/mh.html) appears monthly in the newsgroup
‘comp.mail.mh’.  While very little is there that deals with MH-E
specifically, there is an incredible wealth of material about MH itself
which you will find useful.

   You can find FAQs on MH-E by searching for labels:support on the
Tickets (https://sourceforge.net/p/mh-e/bugs/search/?q=labels%3Asupport)
page on SourceForge.  If you don’t find the answer to your question,
file a ticket and your question will become a new FAQ!


File: mh-e.info,  Node: Getting MH-E,  Prev: MH FAQ and Support,  Up: Odds and Ends

C.4 Getting MH-E
================

Because MH-E is undergoing a phase of sustained growth, the version of
MH-E in your Emacs is likely to be out of date although it is most
likely to be more up to date than the copy that comes with the MH
distribution in ‘miscellany/mh-e’.

   New MH-E releases are always available for downloading at SourceForge
(https://sourceforge.net/projects/mh-e/files/) before they appear in an
Emacs release.  You can read the release notes on that page to determine
if the given release of MH-E is already installed in your version of
Emacs.  You can also read the change log to see if you are interested in
what the given release of MH-E has to offer (although we have no doubt
that you will be extremely interested in all new releases).

   If you use Debian, you can install the Debian mh-e package
(https://packages.debian.org/unstable/mail/mh-e) instead.

   After you download and extract the MH-E tarball, read the ‘README’
file and ‘MH-E-NEWS’.  These correspond to the release notes and change
log mentioned above.  The file ‘README’ contains instructions on
installing MH-E.  If you’re already running Emacs, please quit that
session and start again to load in the new MH-E.  Check that you’re
running the new version with the command ‘M-x mh-version’.

   In addition to the mh-e package, the SourceForge
(https://sourceforge.net/projects/mh-e/files/) site also contains doc
and contrib packages.  The former is the latest release of this manual,
and the latter contains a few contributed packages you might find
useful.


File: mh-e.info,  Node: History,  Next: GFDL,  Prev: Odds and Ends,  Up: Top

Appendix D History of MH-E
**************************

MH-E was originally written by Brian Reid in 1983 and has changed hands
several times since then.  Jim Larus wanted to do something similar for
GNU Emacs, and ended up completely rewriting it that same year.  In
1989, Stephen Gildea picked it up and added many improvements.  Bill
Wohler then took over in 2000 and moved its development to SourceForge
(https://sourceforge.net/).  Since 2016, MH-E development occurs within
the Emacs repository.

* Menu:

* From Brian Reid::
* From Jim Larus::
* From Stephen Gildea::
* From Bill Wohler::


File: mh-e.info,  Node: From Brian Reid,  Next: From Jim Larus,  Up: History

D.1 From Brian Reid
===================

One day in 1983 I got the flu and had to stay home from work for three
days with nothing to do.  I used that time to write MHE.  The
fundamental idea behind MHE was that it was a “puppeteer” driving the MH
programs underneath it.  MH had a model that the editor was supposed to
run as a sub-process of the mailer, which seemed to me at the time to be
the tail wagging the dog.  So I turned it around and made the editor
drive the MH programs.  I made sure that the UCI people (who were
maintaining MH at the time) took in my changes and made them stick.

   Today, I still use my own version of MHE because I don’t at all like
the way that GNU MH-E works and I’ve never gotten to be good enough at
hacking Emacs Lisp to make GNU MH-E do what I want.  The Gosling-emacs
version of MHE and the GNU Emacs version of MH-E have almost nothing in
common except similar names.  They work differently, have different
conceptual models, and have different key bindings(1).

   Brian Reid, June 1994

   ---------- Footnotes ----------

   (1) After reading this article, I questioned Brian about his version
of MHE, and received some great ideas for improving MH-E such as a
dired-like method of selecting folders; and removing the prompting when
sending mail, filling in the blanks in the draft buffer instead.  I
passed them on to Stephen Gildea, the current maintainer, and he was
excited about the ideas as well.  Perhaps one day, MH-E will again
resemble MHE (draft form editing was introduced in version 7.4).


File: mh-e.info,  Node: From Jim Larus,  Next: From Stephen Gildea,  Prev: From Brian Reid,  Up: History

D.2 From Jim Larus
==================

Brian Reid, while at CMU or shortly after going to Stanford wrote a mail
reading program called MHE for Gosling Emacs.  It had much the same
structure as MH-E (i.e., invoked MH programs), though it was simpler and
the commands were slightly different.  Unfortunately, I no longer have a
copy so the differences are lost in the mists of time.

   In ’82–83, I was working at BBN and wrote a lot of mlisp code in
Gosling Emacs to make it look more like Tennex Emacs.  One of the
packages that I picked up and improved was Reid’s mail system.  In ’83,
I went back to Berkeley.  About that time, Stallman’s first version of
GNU Emacs came out and people started to move to it from Gosling Emacs
(as I recall, the transition took a year or two).  I decided to port
Reid’s MHE and used the mlisp to Emacs Lisp translator that came with
GNU Emacs.  It did a lousy job and the resulting code didn’t work, so I
bit the bullet and rewrote the code by hand (it was a lot smaller and
simpler then, so it took only a day or two).

   Soon after that, MH-E became part of the standard Emacs distribution
and suggestions kept dribbling in for improvements.  MH-E soon reached
sufficient functionality to keep me happy, but I kept on improving it
because I was a graduate student with plenty of time on my hands and it
was more fun than my dissertation.  In retrospect, the one thing that I
regret is not writing any documentation, which seriously limited the use
and appeal of the package.

   In ’89, I came to Wisconsin as a professor and decided not to work on
MH-E.  It was stable, except for minor bugs, and had enough
functionality, so I let it be for a few years.  Stephen Gildea of BBN
began to pester me about the bugs, but I ignored them.  In 1990, he went
off to the X Consortium, said good bye, and said that he would now be
using ‘xmh’.  A few months later, he came back and said that he couldn’t
stand ‘xmh’ and could I put a few more bug fixes into MH-E.  At that
point, I had no interest in fixing MH-E, so I gave the responsibility of
maintenance to him and he has done a fine job since then.

   Jim Larus, June 1994


File: mh-e.info,  Node: From Stephen Gildea,  Next: From Bill Wohler,  Prev: From Jim Larus,  Up: History

D.3 From Stephen Gildea
=======================

In 1987 I went to work for Bolt Beranek and Newman, as Jim had before
me.  In my previous job, I had been using RMAIL, but as my folders tend
to run large, I was frustrated with the speed of RMAIL.  However, I
stuck with it because I wanted the GNU Emacs interface.  I am very
familiar and comfortable with the Emacs interface (with just a few
modifications of my own) and dislike having to use applications with
embedded editors; they never live up to Emacs.

   MH is the mail reader of choice at BBN, so I converted to it.  Since
I didn’t want to give up using an Emacs interface, I started using MH-E.
As is my wont, I started hacking on it almost immediately.  I first used
version 3.4m.  One of the first features I added was to treat the folder
buffer as a file-visiting buffer: you could lock it, save it, and be
warned of unsaved changes when killing it.  I also worked to bring its
functionality a little closer to RMAIL.  Jim Larus was very cooperative
about merging in my changes, and my efforts first appeared in version
3.6, distributed with Emacs 18.52 in 1988.  Next I decided MH-E was too
slow and optimized it a lot.  Version, 3.7, distributed with Emacs 18.56
in 1990, was noticeably faster.

   When I moved to the X Consortium I became the first person there to
not use xmh.  (There is now one other engineer there using MH-E.)  About
this point I took over maintenance of MH-E from Jim and was finally able
to add some features Jim hadn’t accepted, such as the backward searching
undo.  My first release was 3.8 (Emacs 18.58) in 1992.

   Now, in 1994, we see a flurry of releases, with both 4.0 and 5.0.
Version 4.0 added many new features, including background folder
collection and support for composing MIME messages.  (Reading MIME
messages remains to be done, alas.)  While writing this book, Bill
Wohler gave MH-E its closest examination ever, uncovering bugs and
inconsistencies that required a new major version to fix, and so version
5 was released.

   Stephen Gildea, June 1994


File: mh-e.info,  Node: From Bill Wohler,  Prev: From Stephen Gildea,  Up: History

D.4 From Bill Wohler
====================

The preface originally included the following text which I use to begin
my story:

     But it’s important to note a brief history of MH-E.

     Version 3 was prevalent through the Emacs 18 and early Emacs 19
     years.  Then Version 4 came out (Emacs 19.23), which introduced
     several new and changed commands.  Next, Version 5.0 was released,
     which fixed some bugs and incompatibilities, and was incorporated
     into Emacs 19.29.

   After a long break, Stephen handed the reins over to me in 2000.  I
moved the project to a new site called SourceForge and organized a great
team of developers.  Our first release in late 2001 was version 6.  It
appeared around the time of Emacs 21.2 and had menus and tool bar
buttons.

   Then, indexed searches, improved MIME handling, a speedbar, multiple
identities, alias completion, an index view of unseen messages, spam
software support, Face and X-Image-URL header field support, Fcc
completion, arbitrary range handling, and draft form editing were
introduced in the version 7 series around the time of Emacs 21.4 (2004).
Still, Emacs itself contained version 5 of MH-E released back in 1994.

   Version 8 development was mostly driven by the rewrite of the manual.
It also brought GNU mailutils MH support, S/MIME support, picon support,
and an improved interface for hiding header fields.  The CVS repository
was migrated from SourceForge to Savannah (only for those files that
were already part of Emacs) and the software was completely reorganized
to push back two decades of entropy.  Version 8 appeared in Emacs 22.1
in 2006.

   Development was then quiet for a couple of years.  Emacs 23.1, which
is due out in 2009, will contain version 8.1.  This version includes a
few new features and several bug fixes.

   Bill Wohler, August 2008


File: mh-e.info,  Node: GFDL,  Next: GPL,  Prev: History,  Up: Top

Appendix E GNU Free Documentation License
*****************************************

                     Version 1.3, 3 November 2008

     Copyright © 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
     <https://fsf.org/>

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document “free” in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of “copyleft”, which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.  We
     recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it can
     be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     “Document”, below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as “you”.  You accept
     the license if you copy, modify or distribute the work in a way
     requiring permission under copyright law.

     A “Modified Version” of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A “Secondary Section” is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document’s overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The “Invariant Sections” are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in the
     notice that says that the Document is released under this License.
     If a section does not fit the above definition of Secondary then it
     is not allowed to be designated as Invariant.  The Document may
     contain zero Invariant Sections.  If the Document does not identify
     any Invariant Sections then there are none.

     The “Cover Texts” are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A “Transparent” copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images composed
     of pixels) generic paint programs or (for drawings) some widely
     available drawing editor, and that is suitable for input to text
     formatters or for automatic translation to a variety of formats
     suitable for input to text formatters.  A copy made in an otherwise
     Transparent file format whose markup, or absence of markup, has
     been arranged to thwart or discourage subsequent modification by
     readers is not Transparent.  An image format is not Transparent if
     used for any substantial amount of text.  A copy that is not
     “Transparent” is called “Opaque”.

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and standard-conforming
     simple HTML, PostScript or PDF designed for human modification.
     Examples of transparent image formats include PNG, XCF and JPG.
     Opaque formats include proprietary formats that can be read and
     edited only by proprietary word processors, SGML or XML for which
     the DTD and/or processing tools are not generally available, and
     the machine-generated HTML, PostScript or PDF produced by some word
     processors for output purposes only.

     The “Title Page” means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, “Title
     Page” means the text near the most prominent appearance of the
     work’s title, preceding the beginning of the body of the text.

     The “publisher” means any person or entity that distributes copies
     of the Document to the public.

     A section “Entitled XYZ” means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.)
     To “Preserve the Title” of such a section when you modify the
     Document means that it remains a section “Entitled XYZ” according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow the
     conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document’s license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the title
     equally prominent and visible.  You may add other material on the
     covers in addition.  Copying with changes limited to the covers, as
     long as they preserve the title of the Document and satisfy these
     conditions, can be treated as verbatim copying in other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a machine-readable
     Transparent copy along with each Opaque copy, or state in or with
     each Opaque copy a computer-network location from which the general
     network-using public has access to download using public-standard
     network protocols a complete Transparent copy of the Document, free
     of added material.  If you use the latter option, you must take
     reasonably prudent steps, when you begin distribution of Opaque
     copies in quantity, to ensure that this Transparent copy will
     remain thus accessible at the stated location until at least one
     year after the last time you distribute an Opaque copy (directly or
     through your agents or retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of copies,
     to give them a chance to provide you with an updated version of the
     Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with the
     Modified Version filling the role of the Document, thus licensing
     distribution and modification of the Modified Version to whoever
     possesses a copy of it.  In addition, you must do these things in
     the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of previous
          versions (which should, if there were any, be listed in the
          History section of the Document).  You may use the same title
          as a previous version if the original publisher of that
          version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document’s
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled “History”, Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on the
          Title Page.  If there is no section Entitled “History” in the
          Document, create one stating the title, year, authors, and
          publisher of the Document as given on its Title Page, then add
          an item describing the Modified Version as stated in the
          previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in the
          “History” section.  You may omit a network location for a work
          that was published at least four years before the Document
          itself, or if the original publisher of the version it refers
          to gives permission.

       K. For any section Entitled “Acknowledgements” or “Dedications”,
          Preserve the Title of the section, and preserve in the section
          all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document, unaltered
          in their text and in their titles.  Section numbers or the
          equivalent are not considered part of the section titles.

       M. Delete any section Entitled “Endorsements”.  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          “Endorsements” or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option designate
     some or all of these sections as invariant.  To do this, add their
     titles to the list of Invariant Sections in the Modified Version’s
     license notice.  These titles must be distinct from any other
     section titles.

     You may add a section Entitled “Endorsements”, provided it contains
     nothing but endorsements of your Modified Version by various
     parties—for example, statements of peer review or that the text has
     been approved by an organization as the authoritative definition of
     a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end of
     the list of Cover Texts in the Modified Version.  Only one passage
     of Front-Cover Text and one of Back-Cover Text may be added by (or
     through arrangements made by) any one entity.  If the Document
     already includes a cover text for the same cover, previously added
     by you or by arrangement made by the same entity you are acting on
     behalf of, you may not add another; but you may replace the old
     one, on explicit permission from the previous publisher that added
     the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination all
     of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     “History” in the various original documents, forming one section
     Entitled “History”; likewise combine any sections Entitled
     “Acknowledgements”, and any sections Entitled “Dedications”.  You
     must delete all sections Entitled “Endorsements.”

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the documents
     in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow this
     License in all other respects regarding verbatim copying of that
     document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of a
     storage or distribution medium, is called an “aggregate” if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation’s users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document’s Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled “Acknowledgements”,
     “Dedications”, or “History”, the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense, or distribute it is void,
     and will automatically terminate your rights under this License.

     However, if you cease all violation of this License, then your
     license from a particular copyright holder is reinstated (a)
     provisionally, unless and until the copyright holder explicitly and
     finally terminates your license, and (b) permanently, if the
     copyright holder fails to notify you of the violation by some
     reasonable means prior to 60 days after the cessation.

     Moreover, your license from a particular copyright holder is
     reinstated permanently if the copyright holder notifies you of the
     violation by some reasonable means, this is the first time you have
     received notice of violation of this License (for any work) from
     that copyright holder, and you cure the violation prior to 30 days
     after your receipt of the notice.

     Termination of your rights under this section does not terminate
     the licenses of parties who have received copies or rights from you
     under this License.  If your rights have been terminated and not
     permanently reinstated, receipt of a copy of some or all of the
     same material does not give you any rights to use it.

  10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     <https://www.gnu.org/licenses/>.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License “or any later version” applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If the
     Document does not specify a version number of this License, you may
     choose any version ever published (not as a draft) by the Free
     Software Foundation.  If the Document specifies that a proxy can
     decide which future versions of this License can be used, that
     proxy’s public statement of acceptance of a version permanently
     authorizes you to choose that version for the Document.

  11. RELICENSING

     “Massive Multiauthor Collaboration Site” (or “MMC Site”) means any
     World Wide Web server that publishes copyrightable works and also
     provides prominent facilities for anybody to edit those works.  A
     public wiki that anybody can edit is an example of such a server.
     A “Massive Multiauthor Collaboration” (or “MMC”) contained in the
     site means any set of copyrightable works thus published on the MMC
     site.

     “CC-BY-SA” means the Creative Commons Attribution-Share Alike 3.0
     license published by Creative Commons Corporation, a not-for-profit
     corporation with a principal place of business in San Francisco,
     California, as well as future copyleft versions of that license
     published by that same organization.

     “Incorporate” means to publish or republish a Document, in whole or
     in part, as part of another Document.

     An MMC is “eligible for relicensing” if it is licensed under this
     License, and if all works that were first published under this
     License somewhere other than this MMC, and subsequently
     incorporated in whole or in part into the MMC, (1) had no cover
     texts or invariant sections, and (2) were thus incorporated prior
     to November 1, 2008.

     The operator of an MMC Site may republish an MMC contained in the
     site under CC-BY-SA on the same site at any time before August 1,
     2009, provided the MMC is eligible for relicensing.

ADDENDUM: How to use this License for your documents
====================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.3
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the “with...Texts.” line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit
their use in free software.


File: mh-e.info,  Node: GPL,  Next: Key Index,  Prev: GFDL,  Up: Top

Appendix F GNU General Public License
*************************************

                        Version 3, 29 June 2007

     Copyright © 2007 Free Software Foundation, Inc. <https://fsf.org/>

     Everyone is permitted to copy and distribute verbatim copies of this
     license document, but changing it is not allowed.

Preamble
========

The GNU General Public License is a free, copyleft license for software
and other kinds of works.

   The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program—to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

   When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

   To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

   For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

   Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

   For the developers’ and authors’ protection, the GPL clearly explains
that there is no warranty for this free software.  For both users’ and
authors’ sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

   Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users’ freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

   Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

   The precise terms and conditions for copying, distribution and
modification follow.

TERMS AND CONDITIONS
====================

  0. Definitions.

     “This License” refers to version 3 of the GNU General Public
     License.

     “Copyright” also means copyright-like laws that apply to other
     kinds of works, such as semiconductor masks.

     “The Program” refers to any copyrightable work licensed under this
     License.  Each licensee is addressed as “you”.  “Licensees” and
     “recipients” may be individuals or organizations.

     To “modify” a work means to copy from or adapt all or part of the
     work in a fashion requiring copyright permission, other than the
     making of an exact copy.  The resulting work is called a “modified
     version” of the earlier work or a work “based on” the earlier work.

     A “covered work” means either the unmodified Program or a work
     based on the Program.

     To “propagate” a work means to do anything with it that, without
     permission, would make you directly or secondarily liable for
     infringement under applicable copyright law, except executing it on
     a computer or modifying a private copy.  Propagation includes
     copying, distribution (with or without modification), making
     available to the public, and in some countries other activities as
     well.

     To “convey” a work means any kind of propagation that enables other
     parties to make or receive copies.  Mere interaction with a user
     through a computer network, with no transfer of a copy, is not
     conveying.

     An interactive user interface displays “Appropriate Legal Notices”
     to the extent that it includes a convenient and prominently visible
     feature that (1) displays an appropriate copyright notice, and (2)
     tells the user that there is no warranty for the work (except to
     the extent that warranties are provided), that licensees may convey
     the work under this License, and how to view a copy of this
     License.  If the interface presents a list of user commands or
     options, such as a menu, a prominent item in the list meets this
     criterion.

  1. Source Code.

     The “source code” for a work means the preferred form of the work
     for making modifications to it.  “Object code” means any non-source
     form of a work.

     A “Standard Interface” means an interface that either is an
     official standard defined by a recognized standards body, or, in
     the case of interfaces specified for a particular programming
     language, one that is widely used among developers working in that
     language.

     The “System Libraries” of an executable work include anything,
     other than the work as a whole, that (a) is included in the normal
     form of packaging a Major Component, but which is not part of that
     Major Component, and (b) serves only to enable use of the work with
     that Major Component, or to implement a Standard Interface for
     which an implementation is available to the public in source code
     form.  A “Major Component”, in this context, means a major
     essential component (kernel, window system, and so on) of the
     specific operating system (if any) on which the executable work
     runs, or a compiler used to produce the work, or an object code
     interpreter used to run it.

     The “Corresponding Source” for a work in object code form means all
     the source code needed to generate, install, and (for an executable
     work) run the object code and to modify the work, including scripts
     to control those activities.  However, it does not include the
     work’s System Libraries, or general-purpose tools or generally
     available free programs which are used unmodified in performing
     those activities but which are not part of the work.  For example,
     Corresponding Source includes interface definition files associated
     with source files for the work, and the source code for shared
     libraries and dynamically linked subprograms that the work is
     specifically designed to require, such as by intimate data
     communication or control flow between those subprograms and other
     parts of the work.

     The Corresponding Source need not include anything that users can
     regenerate automatically from other parts of the Corresponding
     Source.

     The Corresponding Source for a work in source code form is that
     same work.

  2. Basic Permissions.

     All rights granted under this License are granted for the term of
     copyright on the Program, and are irrevocable provided the stated
     conditions are met.  This License explicitly affirms your unlimited
     permission to run the unmodified Program.  The output from running
     a covered work is covered by this License only if the output, given
     its content, constitutes a covered work.  This License acknowledges
     your rights of fair use or other equivalent, as provided by
     copyright law.

     You may make, run and propagate covered works that you do not
     convey, without conditions so long as your license otherwise
     remains in force.  You may convey covered works to others for the
     sole purpose of having them make modifications exclusively for you,
     or provide you with facilities for running those works, provided
     that you comply with the terms of this License in conveying all
     material for which you do not control copyright.  Those thus making
     or running the covered works for you must do so exclusively on your
     behalf, under your direction and control, on terms that prohibit
     them from making any copies of your copyrighted material outside
     their relationship with you.

     Conveying under any other circumstances is permitted solely under
     the conditions stated below.  Sublicensing is not allowed; section
     10 makes it unnecessary.

  3. Protecting Users’ Legal Rights From Anti-Circumvention Law.

     No covered work shall be deemed part of an effective technological
     measure under any applicable law fulfilling obligations under
     article 11 of the WIPO copyright treaty adopted on 20 December
     1996, or similar laws prohibiting or restricting circumvention of
     such measures.

     When you convey a covered work, you waive any legal power to forbid
     circumvention of technological measures to the extent such
     circumvention is effected by exercising rights under this License
     with respect to the covered work, and you disclaim any intention to
     limit operation or modification of the work as a means of
     enforcing, against the work’s users, your or third parties’ legal
     rights to forbid circumvention of technological measures.

  4. Conveying Verbatim Copies.

     You may convey verbatim copies of the Program’s source code as you
     receive it, in any medium, provided that you conspicuously and
     appropriately publish on each copy an appropriate copyright notice;
     keep intact all notices stating that this License and any
     non-permissive terms added in accord with section 7 apply to the
     code; keep intact all notices of the absence of any warranty; and
     give all recipients a copy of this License along with the Program.

     You may charge any price or no price for each copy that you convey,
     and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

     You may convey a work based on the Program, or the modifications to
     produce it from the Program, in the form of source code under the
     terms of section 4, provided that you also meet all of these
     conditions:

       a. The work must carry prominent notices stating that you
          modified it, and giving a relevant date.

       b. The work must carry prominent notices stating that it is
          released under this License and any conditions added under
          section 7.  This requirement modifies the requirement in
          section 4 to “keep intact all notices”.

       c. You must license the entire work, as a whole, under this
          License to anyone who comes into possession of a copy.  This
          License will therefore apply, along with any applicable
          section 7 additional terms, to the whole of the work, and all
          its parts, regardless of how they are packaged.  This License
          gives no permission to license the work in any other way, but
          it does not invalidate such permission if you have separately
          received it.

       d. If the work has interactive user interfaces, each must display
          Appropriate Legal Notices; however, if the Program has
          interactive interfaces that do not display Appropriate Legal
          Notices, your work need not make them do so.

     A compilation of a covered work with other separate and independent
     works, which are not by their nature extensions of the covered
     work, and which are not combined with it such as to form a larger
     program, in or on a volume of a storage or distribution medium, is
     called an “aggregate” if the compilation and its resulting
     copyright are not used to limit the access or legal rights of the
     compilation’s users beyond what the individual works permit.
     Inclusion of a covered work in an aggregate does not cause this
     License to apply to the other parts of the aggregate.

  6. Conveying Non-Source Forms.

     You may convey a covered work in object code form under the terms
     of sections 4 and 5, provided that you also convey the
     machine-readable Corresponding Source under the terms of this
     License, in one of these ways:

       a. Convey the object code in, or embodied in, a physical product
          (including a physical distribution medium), accompanied by the
          Corresponding Source fixed on a durable physical medium
          customarily used for software interchange.

       b. Convey the object code in, or embodied in, a physical product
          (including a physical distribution medium), accompanied by a
          written offer, valid for at least three years and valid for as
          long as you offer spare parts or customer support for that
          product model, to give anyone who possesses the object code
          either (1) a copy of the Corresponding Source for all the
          software in the product that is covered by this License, on a
          durable physical medium customarily used for software
          interchange, for a price no more than your reasonable cost of
          physically performing this conveying of source, or (2) access
          to copy the Corresponding Source from a network server at no
          charge.

       c. Convey individual copies of the object code with a copy of the
          written offer to provide the Corresponding Source.  This
          alternative is allowed only occasionally and noncommercially,
          and only if you received the object code with such an offer,
          in accord with subsection 6b.

       d. Convey the object code by offering access from a designated
          place (gratis or for a charge), and offer equivalent access to
          the Corresponding Source in the same way through the same
          place at no further charge.  You need not require recipients
          to copy the Corresponding Source along with the object code.
          If the place to copy the object code is a network server, the
          Corresponding Source may be on a different server (operated by
          you or a third party) that supports equivalent copying
          facilities, provided you maintain clear directions next to the
          object code saying where to find the Corresponding Source.
          Regardless of what server hosts the Corresponding Source, you
          remain obligated to ensure that it is available for as long as
          needed to satisfy these requirements.

       e. Convey the object code using peer-to-peer transmission,
          provided you inform other peers where the object code and
          Corresponding Source of the work are being offered to the
          general public at no charge under subsection 6d.

     A separable portion of the object code, whose source code is
     excluded from the Corresponding Source as a System Library, need
     not be included in conveying the object code work.

     A “User Product” is either (1) a “consumer product”, which means
     any tangible personal property which is normally used for personal,
     family, or household purposes, or (2) anything designed or sold for
     incorporation into a dwelling.  In determining whether a product is
     a consumer product, doubtful cases shall be resolved in favor of
     coverage.  For a particular product received by a particular user,
     “normally used” refers to a typical or common use of that class of
     product, regardless of the status of the particular user or of the
     way in which the particular user actually uses, or expects or is
     expected to use, the product.  A product is a consumer product
     regardless of whether the product has substantial commercial,
     industrial or non-consumer uses, unless such uses represent the
     only significant mode of use of the product.

     “Installation Information” for a User Product means any methods,
     procedures, authorization keys, or other information required to
     install and execute modified versions of a covered work in that
     User Product from a modified version of its Corresponding Source.
     The information must suffice to ensure that the continued
     functioning of the modified object code is in no case prevented or
     interfered with solely because modification has been made.

     If you convey an object code work under this section in, or with,
     or specifically for use in, a User Product, and the conveying
     occurs as part of a transaction in which the right of possession
     and use of the User Product is transferred to the recipient in
     perpetuity or for a fixed term (regardless of how the transaction
     is characterized), the Corresponding Source conveyed under this
     section must be accompanied by the Installation Information.  But
     this requirement does not apply if neither you nor any third party
     retains the ability to install modified object code on the User
     Product (for example, the work has been installed in ROM).

     The requirement to provide Installation Information does not
     include a requirement to continue to provide support service,
     warranty, or updates for a work that has been modified or installed
     by the recipient, or for the User Product in which it has been
     modified or installed.  Access to a network may be denied when the
     modification itself materially and adversely affects the operation
     of the network or violates the rules and protocols for
     communication across the network.

     Corresponding Source conveyed, and Installation Information
     provided, in accord with this section must be in a format that is
     publicly documented (and with an implementation available to the
     public in source code form), and must require no special password
     or key for unpacking, reading or copying.

  7. Additional Terms.

     “Additional permissions” are terms that supplement the terms of
     this License by making exceptions from one or more of its
     conditions.  Additional permissions that are applicable to the
     entire Program shall be treated as though they were included in
     this License, to the extent that they are valid under applicable
     law.  If additional permissions apply only to part of the Program,
     that part may be used separately under those permissions, but the
     entire Program remains governed by this License without regard to
     the additional permissions.

     When you convey a copy of a covered work, you may at your option
     remove any additional permissions from that copy, or from any part
     of it.  (Additional permissions may be written to require their own
     removal in certain cases when you modify the work.)  You may place
     additional permissions on material, added by you to a covered work,
     for which you have or can give appropriate copyright permission.

     Notwithstanding any other provision of this License, for material
     you add to a covered work, you may (if authorized by the copyright
     holders of that material) supplement the terms of this License with
     terms:

       a. Disclaiming warranty or limiting liability differently from
          the terms of sections 15 and 16 of this License; or

       b. Requiring preservation of specified reasonable legal notices
          or author attributions in that material or in the Appropriate
          Legal Notices displayed by works containing it; or

       c. Prohibiting misrepresentation of the origin of that material,
          or requiring that modified versions of such material be marked
          in reasonable ways as different from the original version; or

       d. Limiting the use for publicity purposes of names of licensors
          or authors of the material; or

       e. Declining to grant rights under trademark law for use of some
          trade names, trademarks, or service marks; or

       f. Requiring indemnification of licensors and authors of that
          material by anyone who conveys the material (or modified
          versions of it) with contractual assumptions of liability to
          the recipient, for any liability that these contractual
          assumptions directly impose on those licensors and authors.

     All other non-permissive additional terms are considered “further
     restrictions” within the meaning of section 10.  If the Program as
     you received it, or any part of it, contains a notice stating that
     it is governed by this License along with a term that is a further
     restriction, you may remove that term.  If a license document
     contains a further restriction but permits relicensing or conveying
     under this License, you may add to a covered work material governed
     by the terms of that license document, provided that the further
     restriction does not survive such relicensing or conveying.

     If you add terms to a covered work in accord with this section, you
     must place, in the relevant source files, a statement of the
     additional terms that apply to those files, or a notice indicating
     where to find the applicable terms.

     Additional terms, permissive or non-permissive, may be stated in
     the form of a separately written license, or stated as exceptions;
     the above requirements apply either way.

  8. Termination.

     You may not propagate or modify a covered work except as expressly
     provided under this License.  Any attempt otherwise to propagate or
     modify it is void, and will automatically terminate your rights
     under this License (including any patent licenses granted under the
     third paragraph of section 11).

     However, if you cease all violation of this License, then your
     license from a particular copyright holder is reinstated (a)
     provisionally, unless and until the copyright holder explicitly and
     finally terminates your license, and (b) permanently, if the
     copyright holder fails to notify you of the violation by some
     reasonable means prior to 60 days after the cessation.

     Moreover, your license from a particular copyright holder is
     reinstated permanently if the copyright holder notifies you of the
     violation by some reasonable means, this is the first time you have
     received notice of violation of this License (for any work) from
     that copyright holder, and you cure the violation prior to 30 days
     after your receipt of the notice.

     Termination of your rights under this section does not terminate
     the licenses of parties who have received copies or rights from you
     under this License.  If your rights have been terminated and not
     permanently reinstated, you do not qualify to receive new licenses
     for the same material under section 10.

  9. Acceptance Not Required for Having Copies.

     You are not required to accept this License in order to receive or
     run a copy of the Program.  Ancillary propagation of a covered work
     occurring solely as a consequence of using peer-to-peer
     transmission to receive a copy likewise does not require
     acceptance.  However, nothing other than this License grants you
     permission to propagate or modify any covered work.  These actions
     infringe copyright if you do not accept this License.  Therefore,
     by modifying or propagating a covered work, you indicate your
     acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

     Each time you convey a covered work, the recipient automatically
     receives a license from the original licensors, to run, modify and
     propagate that work, subject to this License.  You are not
     responsible for enforcing compliance by third parties with this
     License.

     An “entity transaction” is a transaction transferring control of an
     organization, or substantially all assets of one, or subdividing an
     organization, or merging organizations.  If propagation of a
     covered work results from an entity transaction, each party to that
     transaction who receives a copy of the work also receives whatever
     licenses to the work the party’s predecessor in interest had or
     could give under the previous paragraph, plus a right to possession
     of the Corresponding Source of the work from the predecessor in
     interest, if the predecessor has it or can get it with reasonable
     efforts.

     You may not impose any further restrictions on the exercise of the
     rights granted or affirmed under this License.  For example, you
     may not impose a license fee, royalty, or other charge for exercise
     of rights granted under this License, and you may not initiate
     litigation (including a cross-claim or counterclaim in a lawsuit)
     alleging that any patent claim is infringed by making, using,
     selling, offering for sale, or importing the Program or any portion
     of it.

  11. Patents.

     A “contributor” is a copyright holder who authorizes use under this
     License of the Program or a work on which the Program is based.
     The work thus licensed is called the contributor’s “contributor
     version”.

     A contributor’s “essential patent claims” are all patent claims
     owned or controlled by the contributor, whether already acquired or
     hereafter acquired, that would be infringed by some manner,
     permitted by this License, of making, using, or selling its
     contributor version, but do not include claims that would be
     infringed only as a consequence of further modification of the
     contributor version.  For purposes of this definition, “control”
     includes the right to grant patent sublicenses in a manner
     consistent with the requirements of this License.

     Each contributor grants you a non-exclusive, worldwide,
     royalty-free patent license under the contributor’s essential
     patent claims, to make, use, sell, offer for sale, import and
     otherwise run, modify and propagate the contents of its contributor
     version.

     In the following three paragraphs, a “patent license” is any
     express agreement or commitment, however denominated, not to
     enforce a patent (such as an express permission to practice a
     patent or covenant not to sue for patent infringement).  To “grant”
     such a patent license to a party means to make such an agreement or
     commitment not to enforce a patent against the party.

     If you convey a covered work, knowingly relying on a patent
     license, and the Corresponding Source of the work is not available
     for anyone to copy, free of charge and under the terms of this
     License, through a publicly available network server or other
     readily accessible means, then you must either (1) cause the
     Corresponding Source to be so available, or (2) arrange to deprive
     yourself of the benefit of the patent license for this particular
     work, or (3) arrange, in a manner consistent with the requirements
     of this License, to extend the patent license to downstream
     recipients.  “Knowingly relying” means you have actual knowledge
     that, but for the patent license, your conveying the covered work
     in a country, or your recipient’s use of the covered work in a
     country, would infringe one or more identifiable patents in that
     country that you have reason to believe are valid.

     If, pursuant to or in connection with a single transaction or
     arrangement, you convey, or propagate by procuring conveyance of, a
     covered work, and grant a patent license to some of the parties
     receiving the covered work authorizing them to use, propagate,
     modify or convey a specific copy of the covered work, then the
     patent license you grant is automatically extended to all
     recipients of the covered work and works based on it.

     A patent license is “discriminatory” if it does not include within
     the scope of its coverage, prohibits the exercise of, or is
     conditioned on the non-exercise of one or more of the rights that
     are specifically granted under this License.  You may not convey a
     covered work if you are a party to an arrangement with a third
     party that is in the business of distributing software, under which
     you make payment to the third party based on the extent of your
     activity of conveying the work, and under which the third party
     grants, to any of the parties who would receive the covered work
     from you, a discriminatory patent license (a) in connection with
     copies of the covered work conveyed by you (or copies made from
     those copies), or (b) primarily for and in connection with specific
     products or compilations that contain the covered work, unless you
     entered into that arrangement, or that patent license was granted,
     prior to 28 March 2007.

     Nothing in this License shall be construed as excluding or limiting
     any implied license or other defenses to infringement that may
     otherwise be available to you under applicable patent law.

  12. No Surrender of Others’ Freedom.

     If conditions are imposed on you (whether by court order, agreement
     or otherwise) that contradict the conditions of this License, they
     do not excuse you from the conditions of this License.  If you
     cannot convey a covered work so as to satisfy simultaneously your
     obligations under this License and any other pertinent obligations,
     then as a consequence you may not convey it at all.  For example,
     if you agree to terms that obligate you to collect a royalty for
     further conveying from those to whom you convey the Program, the
     only way you could satisfy both those terms and this License would
     be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

     Notwithstanding any other provision of this License, you have
     permission to link or combine any covered work with a work licensed
     under version 3 of the GNU Affero General Public License into a
     single combined work, and to convey the resulting work.  The terms
     of this License will continue to apply to the part which is the
     covered work, but the special requirements of the GNU Affero
     General Public License, section 13, concerning interaction through
     a network will apply to the combination as such.

  14. Revised Versions of this License.

     The Free Software Foundation may publish revised and/or new
     versions of the GNU General Public License from time to time.  Such
     new versions will be similar in spirit to the present version, but
     may differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the
     Program specifies that a certain numbered version of the GNU
     General Public License “or any later version” applies to it, you
     have the option of following the terms and conditions either of
     that numbered version or of any later version published by the Free
     Software Foundation.  If the Program does not specify a version
     number of the GNU General Public License, you may choose any
     version ever published by the Free Software Foundation.

     If the Program specifies that a proxy can decide which future
     versions of the GNU General Public License can be used, that
     proxy’s public statement of acceptance of a version permanently
     authorizes you to choose that version for the Program.

     Later license versions may give you additional or different
     permissions.  However, no additional obligations are imposed on any
     author or copyright holder as a result of your choosing to follow a
     later version.

  15. Disclaimer of Warranty.

     THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
     APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE
     COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS”
     WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE
     RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
     SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
     NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

     IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES
     AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
     DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
     CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
     THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
     BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
     PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
     PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
     THE POSSIBILITY OF SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

     If the disclaimer of warranty and limitation of liability provided
     above cannot be given local legal effect according to their terms,
     reviewing courts shall apply local law that most closely
     approximates an absolute waiver of all civil liability in
     connection with the Program, unless a warranty or assumption of
     liability accompanies a copy of the Program in return for a fee.

END OF TERMS AND CONDITIONS
===========================

How to Apply These Terms to Your New Programs
=============================================

If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.

   To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least the
“copyright” line and a pointer to where the full notice is found.

     ONE LINE TO GIVE THE PROGRAM'S NAME AND A BRIEF IDEA OF WHAT IT DOES.
     Copyright (C) YEAR NAME OF AUTHOR

     This program is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or (at
     your option) any later version.

     This program is distributed in the hope that it will be useful, but
     WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program.  If not, see <https://www.gnu.org/licenses/>.

   Also add information on how to contact you by electronic and paper
mail.

   If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

     PROGRAM Copyright (C) YEAR NAME OF AUTHOR
     This program comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type ‘show c’ for details.

   The hypothetical commands ‘show w’ and ‘show c’ should show the
appropriate parts of the General Public License.  Of course, your
program’s commands might be different; for a GUI interface, you would
use an “about box”.

   You should also get your employer (if you work as a programmer) or
school, if any, to sign a “copyright disclaimer” for the program, if
necessary.  For more information on this, and how to apply and follow
the GNU GPL, see <https://www.gnu.org/licenses/>.

   The GNU General Public License does not permit incorporating your
program into proprietary programs.  If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library.  If this is what you want to do, use the
GNU Lesser General Public License instead of this License.  But first,
please read <https://www.gnu.org/licenses/why-not-lgpl.html>.


File: mh-e.info,  Node: Key Index,  Next: Command Index,  Prev: GPL,  Up: Top

Key (Character) Index
*********************

[index]
* Menu:

* !:                                     Files and Pipes.     (line   6)
* ! <1>:                                 Folders.             (line  11)
* ! <2>:                                 Folders.             (line 171)
* ':                                     Sequences.           (line  13)
* ' <1>:                                 Sequences.           (line  64)
* , (comma):                             Reading Mail.        (line  26)
* , (comma) <1>:                         Viewing.             (line   6)
* , (comma) <2>:                         Editing Drafts.      (line  15)
* , (comma) <3>:                         Editing Message.     (line  32)
* . (period):                            Viewing.             (line   6)
* / ':                                   Limits.              (line  13)
* / ' <1>:                               Limits.              (line  39)
* / ?:                                   Limits.              (line  11)
* / c:                                   Limits.              (line  15)
* / c <1>:                               Limits.              (line  33)
* / g:                                   Limits.              (line  20)
* / g <1>:                               Limits.              (line  39)
* / m:                                   Limits.              (line  17)
* / m <1>:                               Limits.              (line  33)
* / s:                                   Limits.              (line  22)
* / s <1>:                               Limits.              (line  33)
* / t:                                   Limits.              (line  25)
* / t <1>:                               Limits.              (line  33)
* / w:                                   Limits.              (line  27)
* / w <1>:                               Limits.              (line  45)
* : (colon):                             Reading Mail.        (line  28)
* : (colon) <1>:                         Viewing Attachments. (line 125)
* ; (semicolon):                         Reading Mail.        (line  31)
* ; (semicolon) <1>:                     Viewing Attachments. (line  11)
* >:                                     Reading Mail.        (line  38)
* > <1>:                                 Files and Pipes.     (line   6)
* ?:                                     Processing Mail Tour.
                                                              (line  75)
* ? <1>:                                 Using This Manual.   (line   9)
* ? <2>:                                 Reading Mail.        (line  23)
* ? <3>:                                 Folders.             (line  10)
* ? <4>:                                 Miscellaneous.       (line  28)
* |:                                     Reading Mail.        (line  40)
* | <1>:                                 Files and Pipes.     (line  14)
* BS:                                    Processing Mail Tour.
                                                              (line  42)
* BS <1>:                                Reading Mail.        (line  36)
* BS <2>:                                Viewing.             (line   6)
* BS <3>:                                Digests.             (line   6)
* c:                                     Folders.             (line  13)
* c <1>:                                 Folders.             (line 203)
* C-@:                                   Conventions.         (line  80)
* C-b:                                   Processing Mail Tour.
                                                              (line  42)
* C-c ?:                                 Sending Mail Tour.   (line  44)
* C-c ? <1>:                             Using This Manual.   (line   9)
* C-c ? <2>:                             Editing Drafts.      (line  22)
* C-c ? <3>:                             Searching.           (line  12)
* C-c ? <4>:                             Searching.           (line  17)
* C-c ? <5>:                             Miscellaneous.       (line  28)
* C-c C-c:                               Sending Mail Tour.   (line  44)
* C-c C-c <1>:                           Processing Mail Tour.
                                                              (line  42)
* C-c C-c <2>:                           Editing Again.       (line  17)
* C-c C-c <3>:                           Editing Drafts.      (line  24)
* C-c C-c <4>:                           Sending Message.     (line   6)
* C-c C-c <5>:                           Sending Message.     (line  12)
* C-c C-c <6>:                           Searching.           (line  13)
* C-c C-c <7>:                           Searching.           (line 146)
* C-c C-d:                               Editing Drafts.      (line  26)
* C-c C-d <1>:                           Identities.          (line  13)
* C-c C-d <2>:                           Identities.          (line  67)
* C-c C-e:                               Editing Drafts.      (line  29)
* C-c C-e <1>:                           Adding Attachments.  (line 205)
* C-c C-e <2>:                           Adding Attachments.  (line 213)
* C-c C-e <3>:                           Adding Attachments.  (line 222)
* C-c C-f a:                             Editing Drafts.      (line  31)
* C-c C-f a <1>:                         Searching.           (line  19)
* C-c C-f b:                             Editing Drafts.      (line  34)
* C-c C-f b <1>:                         Searching.           (line  22)
* C-c C-f c:                             Editing Drafts.      (line  37)
* C-c C-f c <1>:                         Searching.           (line  25)
* C-c C-f C-a:                           Editing Drafts.      (line  31)
* C-c C-f C-a <1>:                       Searching.           (line  19)
* C-c C-f C-b:                           Editing Drafts.      (line  34)
* C-c C-f C-b <1>:                       Searching.           (line  22)
* C-c C-f C-c:                           Editing Drafts.      (line  37)
* C-c C-f C-c <1>:                       Searching.           (line  25)
* C-c C-f C-d:                           Editing Drafts.      (line  40)
* C-c C-f C-d <1>:                       Searching.           (line  28)
* C-c C-f C-f:                           Editing Drafts.      (line  43)
* C-c C-f C-f <1>:                       Editing Message.     (line  14)
* C-c C-f C-f <2>:                       Searching.           (line  31)
* C-c C-f C-l:                           Editing Drafts.      (line  46)
* C-c C-f C-l <1>:                       Searching.           (line  34)
* C-c C-f C-m:                           Editing Drafts.      (line  49)
* C-c C-f C-m <1>:                       Searching.           (line  37)
* C-c C-f C-r:                           Editing Drafts.      (line  52)
* C-c C-f C-r <1>:                       Searching.           (line  40)
* C-c C-f C-s:                           Editing Drafts.      (line  55)
* C-c C-f C-s <1>:                       Searching.           (line  43)
* C-c C-f C-t:                           Processing Mail Tour.
                                                              (line  42)
* C-c C-f C-t <1>:                       Editing Drafts.      (line  58)
* C-c C-f C-t <2>:                       Editing Message.     (line   6)
* C-c C-f C-t <3>:                       Searching.           (line  46)
* C-c C-f C-t <4>:                       Searching.           (line 137)
* C-c C-f d:                             Editing Drafts.      (line  40)
* C-c C-f d <1>:                         Searching.           (line  28)
* C-c C-f f:                             Editing Drafts.      (line  43)
* C-c C-f f <1>:                         Editing Message.     (line  14)
* C-c C-f f <2>:                         Searching.           (line  31)
* C-c C-f l:                             Editing Drafts.      (line  46)
* C-c C-f l <1>:                         Searching.           (line  34)
* C-c C-f m:                             Editing Drafts.      (line  49)
* C-c C-f m <1>:                         Searching.           (line  37)
* C-c C-f r:                             Editing Drafts.      (line  52)
* C-c C-f r <1>:                         Searching.           (line  40)
* C-c C-f s:                             Editing Drafts.      (line  55)
* C-c C-f s <1>:                         Searching.           (line  43)
* C-c C-f t:                             Editing Drafts.      (line  58)
* C-c C-f t <1>:                         Editing Message.     (line   6)
* C-c C-f t <2>:                         Searching.           (line  46)
* C-c C-i:                               Editing Drafts.      (line  61)
* C-c C-i <1>:                           Inserting Messages.  (line   6)
* C-c C-m:                               Adding Attachments.  (line  12)
* C-c C-m C-e:                           Editing Drafts.      (line  63)
* C-c C-m C-e <1>:                       Sending PGP.         (line  11)
* C-c C-m C-f:                           Editing Drafts.      (line  65)
* C-c C-m C-f <1>:                       Adding Attachments.  (line 111)
* C-c C-m C-g:                           Editing Drafts.      (line  68)
* C-c C-m C-g <1>:                       Adding Attachments.  (line 120)
* C-c C-m C-g <2>:                       Adding Attachments.  (line 128)
* C-c C-m C-i:                           Editing Drafts.      (line  72)
* C-c C-m C-i <1>:                       Adding Attachments.  (line 101)
* C-c C-m C-m:                           Editing Drafts.      (line  76)
* C-c C-m C-m <1>:                       Adding Attachments.  (line 171)
* C-c C-m C-m <2>:                       Adding Attachments.  (line 174)
* C-c C-m C-m <3>:                       Adding Attachments.  (line 205)
* C-c C-m C-n:                           Editing Drafts.      (line  79)
* C-c C-m C-n <1>:                       Sending PGP.         (line  27)
* C-c C-m C-s:                           Editing Drafts.      (line  82)
* C-c C-m C-s <1>:                       Sending PGP.         (line  11)
* C-c C-m C-t:                           Editing Drafts.      (line  84)
* C-c C-m C-t <1>:                       Adding Attachments.  (line 128)
* C-c C-m C-u:                           Editing Drafts.      (line  88)
* C-c C-m C-u <1>:                       Adding Attachments.  (line 205)
* C-c C-m C-x:                           Editing Drafts.      (line  91)
* C-c C-m C-x <1>:                       Adding Attachments.  (line 138)
* C-c C-m e e:                           Editing Drafts.      (line  95)
* C-c C-m e e <1>:                       Sending PGP.         (line  11)
* C-c C-m e s:                           Editing Drafts.      (line  96)
* C-c C-m e s <1>:                       Sending PGP.         (line  11)
* C-c C-m f:                             Editing Drafts.      (line  65)
* C-c C-m f <1>:                         Adding Attachments.  (line 111)
* C-c C-m g:                             Editing Drafts.      (line  68)
* C-c C-m g <1>:                         Adding Attachments.  (line 120)
* C-c C-m i:                             Editing Drafts.      (line  72)
* C-c C-m i <1>:                         Adding Attachments.  (line 101)
* C-c C-m m:                             Editing Drafts.      (line  76)
* C-c C-m m <1>:                         Adding Attachments.  (line 171)
* C-c C-m n:                             Editing Drafts.      (line  79)
* C-c C-m n <1>:                         Sending PGP.         (line  27)
* C-c C-m s e:                           Editing Drafts.      (line  99)
* C-c C-m s e <1>:                       Sending PGP.         (line  11)
* C-c C-m s s:                           Editing Drafts.      (line 102)
* C-c C-m s s <1>:                       Sending PGP.         (line  11)
* C-c C-m t:                             Editing Drafts.      (line  84)
* C-c C-m t <1>:                         Adding Attachments.  (line 128)
* C-c C-m u:                             Editing Drafts.      (line  88)
* C-c C-m u <1>:                         Adding Attachments.  (line 205)
* C-c C-m x:                             Editing Drafts.      (line  91)
* C-c C-m x <1>:                         Adding Attachments.  (line 138)
* C-c C-o:                               Editing Drafts.      (line 104)
* C-c C-o <1>:                           Editing Message.     (line  79)
* C-c C-p:                               Searching.           (line  15)
* C-c C-p <1>:                           Searching.           (line 146)
* C-c C-q:                               Editing Drafts.      (line 106)
* C-c C-q <1>:                           Killing Draft.       (line   6)
* C-c C-s:                               Editing Drafts.      (line 108)
* C-c C-s <1>:                           Signature.           (line   6)
* C-c C-t:                               Editing Drafts.      (line 110)
* C-c C-t <1>:                           Editing Message.     (line  46)
* C-c C-w:                               Editing Drafts.      (line 113)
* C-c C-w <1>:                           Checking Recipients. (line   6)
* C-c C-w <2>:                           Miscellaneous.       (line  39)
* C-c C-y:                               Editing Drafts.      (line 116)
* C-c C-y <1>:                           Inserting Letter.    (line   6)
* C-c C-y <2>:                           Inserting Letter.    (line  51)
* C-c M-d:                               Editing Drafts.      (line 119)
* C-c M-d <1>:                           Identities.          (line  14)
* C-c M-d <2>:                           Identities.          (line 109)
* C-c RET:                               Viewing.             (line 111)
* C-d:                                   Reading Mail.        (line  42)
* C-d <1>:                               Navigating.          (line  33)
* C-f:                                   Processing Mail Tour.
                                                              (line  42)
* C-h C-h:                               Using This Manual.   (line   9)
* C-h C-k i:                             Using This Manual.   (line   9)
* C-h i:                                 Preface.             (line  28)
* C-h i <1>:                             Using This Manual.   (line   9)
* C-h m:                                 Sending Mail Tour.   (line  44)
* C-h m <1>:                             Processing Mail Tour.
                                                              (line  75)
* C-h m <2>:                             Using This Manual.   (line   9)
* C-h t:                                 Preface.             (line  18)
* C-h t <1>:                             Conventions.         (line  96)
* C-n:                                   Processing Mail Tour.
                                                              (line  42)
* C-n <1>:                               Navigating.          (line  18)
* C-o:                                   Editing Message.     (line  79)
* C-p:                                   Processing Mail Tour.
                                                              (line  42)
* C-p <1>:                               Navigating.          (line  18)
* C-SPC:                                 Conventions.         (line  80)
* C-u:                                   Conventions.         (line  39)
* C-u, with ranges:                      Ranges.              (line  10)
* C-x 5 0:                               Speedbar.            (line  34)
* C-x b:                                 Leaving MH-E.        (line  12)
* C-x C-c:                               Leaving MH-E.        (line   6)
* C-x k:                                 Leaving MH-E.        (line  12)
* C-x k <1>:                             Killing Draft.       (line   6)
* d:                                     Processing Mail Tour.
                                                              (line  63)
* d <1>:                                 Reading Mail.        (line  45)
* d <2>:                                 Digests.             (line  13)
* d <3>:                                 Navigating.          (line  23)
* d <4>:                                 Sequences.           (line  95)
* D ?:                                   Reading Mail.        (line  47)
* D b:                                   Reading Mail.        (line  54)
* D b <1>:                               Digests.             (line  13)
* D BS:                                  Reading Mail.        (line  52)
* D BS <1>:                              Digests.             (line   6)
* D SPC:                                 Reading Mail.        (line  50)
* D SPC <1>:                             Digests.             (line   6)
* DEL:                                   Reading Mail Tour.   (line  41)
* e:                                     Sending Mail.        (line  19)
* E:                                     Sending Mail.        (line  20)
* e <1>:                                 Redistributing.      (line  12)
* e <2>:                                 Editing Again.       (line   6)
* e <3>:                                 Editing Again.       (line  14)
* E <1>:                                 Editing Again.       (line  17)
* f:                                     Sending Mail.        (line  23)
* f <1>:                                 Forwarding.          (line   6)
* F ':                                   Folders.             (line  18)
* F ' <1>:                               Folders.             (line 248)
* F ' <2>:                               Sequences.           (line  64)
* F ?:                                   Processing Mail Tour.
                                                              (line  75)
* F ? <1>:                               Folders.             (line  15)
* F c:                                   Folders.             (line  20)
* F k:                                   Folders.             (line  22)
* F k <1>:                               Folders.             (line 266)
* F k <2>:                               Searching.           (line 170)
* F l:                                   Folders.             (line  24)
* F l <1>:                               Folders.             (line 266)
* F l <2>:                               Miscellaneous.       (line  25)
* F n:                                   Folders.             (line  26)
* F n <1>:                               Folders.             (line 240)
* F p:                                   Folders.             (line  28)
* F p <1>:                               Folders.             (line 266)
* F p <2>:                               Folders.             (line 278)
* F q:                                   Folders.             (line  30)
* F q <1>:                               Folders.             (line 254)
* F r:                                   Reading Mail Tour.   (line  12)
* F r <1>:                               Reading Mail.        (line   6)
* F r <2>:                               Folders.             (line  32)
* F r <3>:                               Folders.             (line 266)
* F r <4>:                               Searching.           (line 161)
* F s:                                   Folders.             (line  34)
* F S:                                   Folders.             (line  36)
* F s <1>:                               Folders.             (line 237)
* F S <1>:                               Folders.             (line 266)
* F S <2>:                               Folders.             (line 301)
* F s <2>:                               Searching.           (line   6)
* F s <3>:                               Searching.           (line  78)
* F s <4>:                               Searching.           (line 141)
* F s <5>:                               Searching.           (line 174)
* F s <6>:                               Searching.           (line 191)
* F u:                                   Folders.             (line  38)
* F u <1>:                               Folders.             (line 183)
* F v:                                   Reading Mail.        (line   6)
* F v <1>:                               Folders.             (line  41)
* F v <2>:                               Folders.             (line 224)
* F v <3>:                               Speedbar.            (line   6)
* F v drafts:                            Editing Again.       (line   6)
* g:                                     Reading Mail.        (line  56)
* g <1>:                                 Navigating.          (line   6)
* i:                                     Processing Mail Tour.
                                                              (line  63)
* i <1>:                                 Incorporating Mail.  (line  10)
* i <2>:                                 Incorporating Mail.  (line  26)
* i <3>:                                 Incorporating Mail.  (line  83)
* I *:                                   Incorporating Mail.  (line  66)
* J ?:                                   Junk.                (line  17)
* J a:                                   Junk.                (line  21)
* J a <1>:                               Junk.                (line  80)
* J a <2>:                               Junk.                (line 143)
* J a <3>:                               Junk.                (line 215)
* J a <4>:                               Junk.                (line 252)
* J b:                                   Junk.                (line  19)
* J b <1>:                               Junk.                (line  73)
* J b <2>:                               Junk.                (line 143)
* J b <3>:                               Junk.                (line 215)
* J b <4>:                               Junk.                (line 252)
* k:                                     Reading Mail.        (line  58)
* k <1>:                                 Navigating.          (line  37)
* k <2>:                                 Folders.             (line 287)
* k <3>:                                 Threading.           (line  54)
* K ?:                                   Reading Mail.        (line  61)
* K a:                                   Reading Mail.        (line  68)
* K a <1>:                               Viewing Attachments. (line  72)
* K e:                                   Reading Mail.        (line  70)
* K e <1>:                               Viewing Attachments. (line  48)
* K i:                                   Reading Mail.        (line  72)
* K i <1>:                               Viewing Attachments. (line 131)
* K o:                                   Reading Mail.        (line  74)
* K o <1>:                               Viewing Attachments. (line  63)
* K S-TAB:                               Reading Mail.        (line  66)
* K S-TAB <1>:                           Viewing Attachments. (line  25)
* K t:                                   Reading Mail.        (line  76)
* K t <1>:                               Viewing Attachments. (line  88)
* K TAB:                                 Reading Mail.        (line  64)
* K TAB <1>:                             Viewing Attachments. (line  25)
* K v:                                   Reading Mail.        (line  79)
* K v <1>:                               Viewing Attachments. (line  37)
* l:                                     Files and Pipes.     (line  14)
* m:                                     Processing Mail Tour.
                                                              (line  72)
* M:                                     Reading Mail.        (line  81)
* M <1>:                                 Miscellaneous Commands and Options.
                                                              (line   8)
* m <1>:                                 Composing.           (line  16)
* M-<:                                   Reading Mail.        (line  83)
* M-< <1>:                               Navigating.          (line   6)
* M->:                                   Reading Mail.        (line  85)
* M-> <1>:                               Navigating.          (line   6)
* M-d:                                   Sending Mail.        (line  29)
* M-d <1>:                               Redistributing.      (line   6)
* M-n:                                   Reading Mail.        (line  87)
* M-n <1>:                               Navigating.          (line   6)
* M-p:                                   Reading Mail.        (line  89)
* M-p <1>:                               Navigating.          (line   6)
* M-q:                                   Editing Message.     (line  61)
* M-TAB:                                 Editing Drafts.      (line  13)
* M-TAB <1>:                             Editing Message.     (line  32)
* M-TAB <2>:                             Aliases.             (line  15)
* M-TAB <3>:                             Aliases.             (line  71)
* M-x:                                   Conventions.         (line  96)
* mouse-1:                               Reading Mail.        (line 122)
* mouse-1 <1>:                           Viewing Attachments. (line  25)
* mouse-2:                               Reading Mail.        (line 117)
* mouse-2 <1>:                           Reading Mail.        (line 122)
* mouse-2 <2>:                           Viewing.             (line   6)
* mouse-2 <3>:                           Viewing.             (line 111)
* mouse-2 <4>:                           Viewing Attachments. (line  25)
* mouse-2 <5>:                           HTML.                (line  62)
* mouse-2 <6>:                           Speedbar.            (line   6)
* mouse-3:                               Speedbar.            (line  34)
* n:                                     Reading Mail Tour.   (line  19)
* n <1>:                                 Processing Mail Tour.
                                                              (line  63)
* n <2>:                                 Reading Mail.        (line  91)
* n <3>:                                 Navigating.          (line   6)
* n <4>:                                 Navigating.          (line  23)
* n <5>:                                 Editing Again.       (line   6)
* o:                                     Processing Mail Tour.
                                                              (line  51)
* o <1>:                                 Folders.             (line  43)
* o <2>:                                 Folders.             (line 163)
* o <3>:                                 Folders.             (line 203)
* p:                                     Reading Mail Tour.   (line  19)
* p <1>:                                 Processing Mail Tour.
                                                              (line  63)
* p <2>:                                 Reading Mail.        (line  93)
* p <3>:                                 Navigating.          (line   6)
* p <4>:                                 Navigating.          (line  23)
* P ?:                                   Reading Mail.        (line  95)
* P C:                                   Reading Mail.        (line  98)
* P C <1>:                               Printing.            (line  18)
* P F:                                   Reading Mail.        (line 101)
* P f:                                   Reading Mail.        (line 104)
* P f <1>:                               Printing.            (line   6)
* P F <1>:                               Printing.            (line  26)
* P f <2>:                               Printing.            (line  40)
* P l:                                   Reading Mail.        (line 106)
* P l <1>:                               Printing.            (line  35)
* P l <2>:                               Printing.            (line  40)
* P p:                                   Reading Mail.        (line 108)
* P p <1>:                               Printing.            (line   6)
* P p <2>:                               Printing.            (line  40)
* q:                                     Leaving MH-E.        (line  12)
* q <1>:                                 Folders.             (line  45)
* q <2>:                                 Folders.             (line 307)
* q <3>:                                 Folders.             (line 315)
* q <4>:                                 Sequences.           (line 102)
* r:                                     Processing Mail Tour.
                                                              (line   6)
* r <1>:                                 Sending Mail.        (line  25)
* r <2>:                                 Replying.            (line   6)
* r <3>:                                 Inserting Letter.    (line  36)
* RET:                                   Reading Mail Tour.   (line  19)
* RET <1>:                               Processing Mail Tour.
                                                              (line   6)
* RET <2>:                               Processing Mail Tour.
                                                              (line  63)
* RET <3>:                               Reading Mail.        (line  24)
* RET <4>:                               Reading Mail.        (line 122)
* RET <5>:                               Viewing.             (line   6)
* RET <6>:                               Viewing Attachments. (line  25)
* RET <7>:                               Files and Pipes.     (line  31)
* RET <8>:                               Navigating.          (line  18)
* s:                                     Sending Mail.        (line  27)
* S ':                                   Sequences.           (line  17)
* S ' <1>:                               Sequences.           (line  73)
* S ?:                                   Sequences.           (line  14)
* S d:                                   Sequences.           (line  19)
* S d <1>:                               Sequences.           (line  95)
* S k:                                   Sequences.           (line  21)
* S k <1>:                               Sequences.           (line  95)
* S l:                                   Sequences.           (line  23)
* S l <1>:                               Sequences.           (line  83)
* S n:                                   Sequences.           (line  25)
* S n <1>:                               Sequences.           (line  73)
* S n <2>:                               Sequences.           (line 115)
* S p:                                   Sequences.           (line  27)
* S p <1>:                               Sequences.           (line  59)
* S p <2>:                               Sequences.           (line  64)
* S s:                                   Sequences.           (line  29)
* S s <1>:                               Sequences.           (line  83)
* S w:                                   Sequences.           (line  32)
* S w <1>:                               Sequences.           (line  73)
* S w <2>:                               Sequences.           (line 115)
* S-mouse-2:                             HTML.                (line  84)
* S-TAB:                                 Editing Drafts.      (line  19)
* S-TAB <1>:                             Editing Message.     (line  19)
* S-TAB <2>:                             Searching.           (line  55)
* S-TAB <3>:                             Searching.           (line 152)
* SPC:                                   Conventions.         (line  88)
* SPC <1>:                               Reading Mail Tour.   (line  41)
* SPC <2>:                               Processing Mail Tour.
                                                              (line  51)
* SPC <3>:                               Reading Mail.        (line  34)
* SPC <4>:                               Viewing.             (line   6)
* SPC <5>:                               Digests.             (line   6)
* SPC <6>:                               Editing Drafts.      (line  11)
* SPC <7>:                               Editing Message.     (line  32)
* SPC <8>:                               Aliases.             (line  13)
* SPC <9>:                               Aliases.             (line  71)
* t:                                     Digests.             (line  13)
* t <1>:                                 Folders.             (line  47)
* t <2>:                                 Folders.             (line 210)
* t <3>:                                 Folders.             (line 217)
* T ?:                                   Threading.           (line  19)
* T d:                                   Navigating.          (line  37)
* T d <1>:                               Threading.           (line  23)
* T d <2>:                               Threading.           (line  54)
* T n:                                   Threading.           (line  27)
* T n <1>:                               Threading.           (line  46)
* T o:                                   Threading.           (line  21)
* T o <1>:                               Threading.           (line  54)
* T p:                                   Threading.           (line  29)
* T p <1>:                               Threading.           (line  46)
* T t:                                   Threading.           (line  25)
* T t <1>:                               Threading.           (line  40)
* T u:                                   Threading.           (line  31)
* T u <1>:                               Threading.           (line  46)
* TAB:                                   Conventions.         (line  88)
* TAB <1>:                               Folders.             (line 282)
* TAB <2>:                               Editing Drafts.      (line  17)
* TAB <3>:                               Editing Message.     (line  19)
* TAB <4>:                               Aliases.             (line  63)
* TAB <5>:                               Searching.           (line  54)
* TAB <6>:                               Searching.           (line 152)
* u:                                     Navigating.          (line  37)
* u <1>:                                 Folders.             (line  50)
* u <2>:                                 Folders.             (line 177)
* v:                                     Searching.           (line  57)
* v <1>:                                 Searching.           (line 161)
* x:                                     Processing Mail Tour.
                                                              (line  63)
* x <1>:                                 Leaving MH-E.        (line   6)
* x <2>:                                 Navigating.          (line  46)
* x <3>:                                 Folders.             (line  52)
* x <4>:                                 Folders.             (line 186)
* x <5>:                                 Folders.             (line 193)
* x <6>:                                 Sequences.           (line 102)
* X ?:                                   Reading Mail.        (line 110)
* X s:                                   Reading Mail.        (line 113)
* X s <1>:                               Files and Pipes.     (line  21)
* X s <2>:                               Files and Pipes.     (line  31)
* X u:                                   Reading Mail.        (line 113)


File: mh-e.info,  Node: Command Index,  Next: Option Index,  Prev: Key Index,  Up: Top

Command Index
*************

[index]
* Menu:

* add-hook:                              Conventions.         (line  70)
* backward-char:                         Processing Mail Tour.
                                                              (line  42)
* browse-url-at-mouse:                   HTML.                (line  84)
* call-process:                          Junk.                (line  90)
* customize-face:                        Conventions.         (line  65)
* customize-group:                       Conventions.         (line  60)
* customize-group <1>:                   Options.             (line  33)
* customize-option:                      Conventions.         (line  60)
* customize-option <1>:                  Conventions.         (line  70)
* customize-option <2>:                  Options.             (line   6)
* customize-option <3>:                  Options.             (line  15)
* delete-frame:                          Speedbar.            (line  34)
* describe-mode:                         Sending Mail Tour.   (line  44)
* describe-mode <1>:                     Processing Mail Tour.
                                                              (line  75)
* describe-mode <2>:                     Using This Manual.   (line   9)
* dired:                                 Folders.             (line 340)
* dired-do-rename:                       Folders.             (line 340)
* display-time:                          Incorporating Mail.  (line  38)
* display-time <1>:                      Reading Mail.        (line  11)
* fill-paragraph:                        Editing Message.     (line  61)
* forward-char:                          Processing Mail Tour.
                                                              (line  42)
* goto-address-at-point:                 Viewing.             (line 111)
* goto-address-at-point <1>:             Sending Mail.        (line  11)
* help-with-tutorial:                    Preface.             (line  18)
* help-with-tutorial <1>:                Conventions.         (line  96)
* indent-relative:                       Editing Message.     (line  19)
* ispell-complete-word:                  Editing Message.     (line  32)
* ispell-message:                        Sending Message.     (line  12)
* kill-buffer:                           Killing Draft.       (line   6)
* mailcap-mime-info:                     Viewing Attachments. (line  48)
* mailcap-mime-types:                    Adding Attachments.  (line  32)
* mh-alias-add-address-under-point:      Aliases.             (line 190)
* mh-alias-add-alias:                    Aliases.             (line 162)
* mh-alias-apropos:                      Aliases.             (line  17)
* mh-alias-apropos <1>:                  Aliases.             (line 212)
* mh-alias-grab-from-field:              Aliases.             (line  19)
* mh-alias-grab-from-field <1>:          Aliases.             (line 190)
* mh-alias-minibuffer-confirm-address:   Aliases.             (line  91)
* mh-alias-reload:                       Aliases.             (line  21)
* mh-alias-reload <1>:                   Aliases.             (line 149)
* mh-annotate-msg:                       Sending Mail.        (line  73)
* mh-burst-digest:                       Reading Mail.        (line  54)
* mh-burst-digest <1>:                   Digests.             (line  13)
* mh-catchup:                            Folders.             (line  20)
* mh-check-whom:                         Editing Drafts.      (line 113)
* mh-check-whom <1>:                     Checking Recipients. (line   6)
* mh-check-whom <2>:                     Miscellaneous.       (line  37)
* mh-compose-forward:                    Editing Drafts.      (line  65)
* mh-compose-forward <1>:                Adding Attachments.  (line 111)
* mh-compose-insertion:                  Editing Drafts.      (line  72)
* mh-compose-insertion <1>:              Adding Attachments.  (line 101)
* mh-copy-msg:                           Folders.             (line  13)
* mh-copy-msg <1>:                       Folders.             (line 203)
* mh-customize:                          Options.             (line  33)
* mh-delete-msg:                         Reading Mail.        (line  45)
* mh-delete-msg <1>:                     Navigating.          (line  23)
* mh-delete-msg-from-seq:                Sequences.           (line  19)
* mh-delete-msg-from-seq <1>:            Sequences.           (line  95)
* mh-delete-msg-no-motion:               Reading Mail.        (line  42)
* mh-delete-msg-no-motion <1>:           Navigating.          (line  33)
* mh-delete-seq:                         Sequences.           (line  21)
* mh-delete-seq <1>:                     Sequences.           (line  95)
* mh-delete-subject:                     Navigating.          (line  37)
* mh-delete-subject-or-thread:           Reading Mail.        (line  58)
* mh-delete-subject-or-thread <1>:       Navigating.          (line  37)
* mh-delete-subject-or-thread <2>:       Threading.           (line  54)
* mh-display-with-external-viewer:       Reading Mail.        (line  70)
* mh-display-with-external-viewer <1>:   Viewing Attachments. (line  48)
* mh-edit-again:                         Sending Mail.        (line  19)
* mh-edit-again <1>:                     Redistributing.      (line  12)
* mh-edit-again <2>:                     Editing Again.       (line   6)
* mh-execute-commands:                   Incorporating Mail.  (line  89)
* mh-execute-commands <1>:               Navigating.          (line  46)
* mh-execute-commands <2>:               Folders.             (line  52)
* mh-execute-commands <3>:               Folders.             (line 186)
* mh-execute-commands <4>:               Folders.             (line 315)
* mh-extract-rejected-mail:              Sending Mail.        (line  20)
* mh-extract-rejected-mail <1>:          Editing Again.       (line  17)
* mh-find-path:                          Getting Started.     (line  67)
* mh-first-msg:                          Reading Mail.        (line  83)
* mh-first-msg <1>:                      Navigating.          (line   6)
* mh-folder-inline-mime-part:            Reading Mail.        (line  72)
* mh-folder-inline-mime-part <1>:        Viewing Attachments. (line 131)
* mh-folder-save-mime-part:              Reading Mail.        (line  74)
* mh-folder-save-mime-part <1>:          Viewing Attachments. (line  63)
* mh-folder-toggle-mime-part:            Reading Mail.        (line  79)
* mh-folder-toggle-mime-part <1>:        Viewing Attachments. (line  37)
* mh-forward:                            Sending Mail.        (line  23)
* mh-forward <1>:                        Forwarding.          (line   6)
* mh-fully-kill-draft:                   Editing Drafts.      (line 106)
* mh-fully-kill-draft <1>:               Killing Draft.       (line   6)
* mh-goto-msg:                           Reading Mail.        (line  56)
* mh-goto-msg <1>:                       Navigating.          (line   6)
* mh-header-display:                     Reading Mail.        (line  26)
* mh-header-display <1>:                 Viewing.             (line   6)
* mh-help:                               Using This Manual.   (line   9)
* mh-help <1>:                           Reading Mail.        (line  23)
* mh-help <2>:                           Folders.             (line  10)
* mh-help <3>:                           Editing Drafts.      (line  22)
* mh-help <4>:                           Searching.           (line  12)
* mh-help <5>:                           Searching.           (line  17)
* mh-help <6>:                           Miscellaneous.       (line  26)
* mh-inc-folder:                         Incorporating Mail.  (line  10)
* mh-inc-folder <1>:                     Incorporating Mail.  (line  22)
* mh-inc-folder <2>:                     Incorporating Mail.  (line  26)
* mh-inc-folder <3>:                     Incorporating Mail.  (line  83)
* mh-inc-spool-*:                        Incorporating Mail.  (line  66)
* mh-index-do-search:                    Searching.           (line  13)
* mh-index-do-search <1>:                Searching.           (line 146)
* mh-index-new-messages:                 Folders.             (line  26)
* mh-index-new-messages <1>:             Folders.             (line 240)
* mh-index-next-folder:                  Searching.           (line  54)
* mh-index-next-folder <1>:              Searching.           (line 152)
* mh-index-previous-folder:              Searching.           (line  55)
* mh-index-previous-folder <1>:          Searching.           (line 152)
* mh-index-sequenced-messages:           Folders.             (line  30)
* mh-index-sequenced-messages <1>:       Folders.             (line 254)
* mh-index-ticked-messages:              Folders.             (line  18)
* mh-index-ticked-messages <1>:          Folders.             (line 248)
* mh-index-ticked-messages <2>:          Sequences.           (line  64)
* mh-index-visit-folder:                 Searching.           (line  57)
* mh-index-visit-folder <1>:             Searching.           (line 161)
* mh-insert-auto-fields:                 Editing Drafts.      (line 119)
* mh-insert-auto-fields <1>:             Identities.          (line  14)
* mh-insert-auto-fields <2>:             Identities.          (line 109)
* mh-insert-identity:                    Editing Drafts.      (line  26)
* mh-insert-identity <1>:                Identities.          (line  13)
* mh-insert-identity <2>:                Identities.          (line  67)
* mh-insert-letter:                      Editing Drafts.      (line  61)
* mh-insert-letter <1>:                  Inserting Messages.  (line   6)
* mh-insert-signature:                   Editing Drafts.      (line 108)
* mh-insert-signature <1>:               Signature.           (line   6)
* mh-insert-signature, example:          Composing.           (line  41)
* mh-junk-allowlist:                     Junk.                (line  21)
* mh-junk-allowlist <1>:                 Junk.                (line  80)
* mh-junk-allowlist <2>:                 Junk.                (line 143)
* mh-junk-allowlist <3>:                 Junk.                (line 215)
* mh-junk-allowlist <4>:                 Junk.                (line 252)
* mh-junk-blocklist:                     Junk.                (line  19)
* mh-junk-blocklist <1>:                 Junk.                (line  73)
* mh-junk-blocklist <2>:                 Junk.                (line 143)
* mh-junk-blocklist <3>:                 Junk.                (line 215)
* mh-junk-blocklist <4>:                 Junk.                (line 252)
* mh-kill-folder:                        Miscellaneous Commands and Options.
                                                              (line  14)
* mh-kill-folder <1>:                    Folders.             (line  22)
* mh-kill-folder <2>:                    Folders.             (line 266)
* mh-kill-folder <3>:                    Searching.           (line 170)
* mh-last-msg:                           Reading Mail.        (line  85)
* mh-last-msg <1>:                       Navigating.          (line   6)
* mh-letter-complete:                    Editing Drafts.      (line  13)
* mh-letter-complete <1>:                Editing Message.     (line  32)
* mh-letter-complete <2>:                Aliases.             (line  15)
* mh-letter-complete <3>:                Aliases.             (line  71)
* mh-letter-complete-or-space:           Editing Drafts.      (line  11)
* mh-letter-complete-or-space <1>:       Editing Message.     (line  32)
* mh-letter-complete-or-space <2>:       Aliases.             (line  13)
* mh-letter-complete-or-space <3>:       Aliases.             (line  71)
* mh-letter-confirm-address:             Editing Drafts.      (line  15)
* mh-letter-confirm-address <1>:         Editing Message.     (line  32)
* mh-letter-confirm-address <2>:         Aliases.             (line  91)
* mh-letter-next-header-field-or-indent: Editing Drafts.      (line  17)
* mh-letter-next-header-field-or-indent <1>: Editing Message. (line  19)
* mh-letter-previous-header-field:       Editing Drafts.      (line  19)
* mh-letter-previous-header-field <1>:   Editing Message.     (line  19)
* mh-letter-toggle-header-field-display: Editing Drafts.      (line 110)
* mh-letter-toggle-header-field-display <1>: Editing Message. (line  46)
* mh-list-folders:                       Folders.             (line  24)
* mh-list-folders <1>:                   Folders.             (line 266)
* mh-list-folders <2>:                   Miscellaneous.       (line  24)
* mh-list-sequences:                     Sequences.           (line  23)
* mh-list-sequences <1>:                 Sequences.           (line  83)
* mh-mh-compose-anon-ftp:                Editing Drafts.      (line  68)
* mh-mh-compose-anon-ftp <1>:            Adding Attachments.  (line 120)
* mh-mh-compose-anon-ftp <2>:            Adding Attachments.  (line 128)
* mh-mh-compose-external-compressed-tar: Editing Drafts.      (line  84)
* mh-mh-compose-external-compressed-tar <1>: Adding Attachments.
                                                              (line 128)
* mh-mh-compose-external-type:           Editing Drafts.      (line  91)
* mh-mh-compose-external-type <1>:       Adding Attachments.  (line 138)
* mh-mh-to-mime:                         Editing Drafts.      (line  29)
* mh-mh-to-mime <1>:                     Adding Attachments.  (line 205)
* mh-mh-to-mime-undo:                    Editing Drafts.      (line  88)
* mh-mh-to-mime-undo <1>:                Adding Attachments.  (line 205)
* mh-mime-save-parts:                    Reading Mail.        (line  68)
* mh-mime-save-parts <1>:                Viewing Attachments. (line  72)
* mh-mml-secure-message-encrypt:         Editing Drafts.      (line  63)
* mh-mml-secure-message-encrypt <1>:     Editing Drafts.      (line  95)
* mh-mml-secure-message-encrypt <2>:     Sending PGP.         (line  11)
* mh-mml-secure-message-sign:            Editing Drafts.      (line  82)
* mh-mml-secure-message-sign <1>:        Editing Drafts.      (line 102)
* mh-mml-secure-message-sign <2>:        Sending PGP.         (line  11)
* mh-mml-secure-message-signencrypt:     Editing Drafts.      (line  96)
* mh-mml-secure-message-signencrypt <1>: Editing Drafts.      (line  99)
* mh-mml-secure-message-signencrypt <2>: Sending PGP.         (line  11)
* mh-mml-to-mime:                        Editing Drafts.      (line  76)
* mh-mml-to-mime <1>:                    Adding Attachments.  (line 171)
* mh-mml-to-mime <2>:                    Adding Attachments.  (line 174)
* mh-mml-unsecure-message:               Editing Drafts.      (line  79)
* mh-mml-unsecure-message <1>:           Sending PGP.         (line  27)
* mh-modify:                             Reading Mail.        (line  81)
* mh-modify <1>:                         Miscellaneous Commands and Options.
                                                              (line   8)
* mh-msg-is-in-seq:                      Sequences.           (line  29)
* mh-msg-is-in-seq <1>:                  Sequences.           (line  83)
* mh-narrow-to-cc:                       Limits.              (line  15)
* mh-narrow-to-cc <1>:                   Limits.              (line  33)
* mh-narrow-to-from:                     Limits.              (line  17)
* mh-narrow-to-from <1>:                 Limits.              (line  33)
* mh-narrow-to-range:                    Limits.              (line  20)
* mh-narrow-to-range <1>:                Limits.              (line  39)
* mh-narrow-to-seq:                      Sequences.           (line  25)
* mh-narrow-to-seq <1>:                  Sequences.           (line  73)
* mh-narrow-to-subject:                  Limits.              (line  22)
* mh-narrow-to-subject <1>:              Limits.              (line  33)
* mh-narrow-to-tick:                     Limits.              (line  13)
* mh-narrow-to-tick <1>:                 Limits.              (line  39)
* mh-narrow-to-tick <2>:                 Sequences.           (line  17)
* mh-narrow-to-tick <3>:                 Sequences.           (line  73)
* mh-narrow-to-to:                       Limits.              (line  25)
* mh-narrow-to-to <1>:                   Limits.              (line  33)
* mh-next-button:                        Reading Mail.        (line  64)
* mh-next-button <1>:                    Viewing Attachments. (line  25)
* mh-next-undeleted-msg:                 Reading Mail.        (line  91)
* mh-next-undeleted-msg <1>:             Navigating.          (line   6)
* mh-next-unread-msg:                    Reading Mail.        (line  87)
* mh-next-unread-msg <1>:                Navigating.          (line   6)
* mh-open-line:                          Editing Drafts.      (line 104)
* mh-open-line <1>:                      Editing Message.     (line  79)
* mh-pack-folder:                        Miscellaneous Commands and Options.
                                                              (line  14)
* mh-pack-folder <1>:                    Folders.             (line  28)
* mh-pack-folder <2>:                    Folders.             (line 266)
* mh-page-digest:                        Reading Mail.        (line  50)
* mh-page-digest <1>:                    Digests.             (line   6)
* mh-page-digest-backwards:              Reading Mail.        (line  52)
* mh-page-digest-backwards <1>:          Digests.             (line   6)
* mh-page-msg:                           Reading Mail.        (line  34)
* mh-page-msg <1>:                       Viewing.             (line   6)
* mh-pick-do-search:                     Searching.           (line  15)
* mh-pick-do-search <1>:                 Searching.           (line 146)
* mh-pipe-msg:                           Reading Mail.        (line  40)
* mh-pipe-msg <1>:                       Files and Pipes.     (line  14)
* mh-prefix-help:                        Reading Mail.        (line  47)
* mh-prefix-help <1>:                    Reading Mail.        (line  61)
* mh-prefix-help <2>:                    Reading Mail.        (line  95)
* mh-prefix-help <3>:                    Reading Mail.        (line 110)
* mh-prefix-help <4>:                    Folders.             (line  15)
* mh-prefix-help <5>:                    Threading.           (line  19)
* mh-prefix-help <6>:                    Limits.              (line  11)
* mh-prefix-help <7>:                    Sequences.           (line  14)
* mh-prefix-help <8>:                    Junk.                (line  17)
* mh-press-button:                       Reading Mail.        (line 122)
* mh-press-button <1>:                   Viewing Attachments. (line  25)
* mh-prev-button:                        Reading Mail.        (line  66)
* mh-prev-button <1>:                    Viewing Attachments. (line  25)
* mh-previous-page:                      Reading Mail.        (line  36)
* mh-previous-page <1>:                  Viewing.             (line   6)
* mh-previous-undeleted-msg:             Reading Mail.        (line  93)
* mh-previous-undeleted-msg <1>:         Navigating.          (line   6)
* mh-previous-unread-msg:                Reading Mail.        (line  89)
* mh-previous-unread-msg <1>:            Navigating.          (line   6)
* mh-print-msg:                          Reading Mail.        (line 106)
* mh-print-msg <1>:                      Printing.            (line  35)
* mh-ps-print-msg:                       Reading Mail.        (line 108)
* mh-ps-print-msg <1>:                   Printing.            (line   6)
* mh-ps-print-msg-file:                  Reading Mail.        (line 104)
* mh-ps-print-msg-file <1>:              Printing.            (line   6)
* mh-ps-print-toggle-color:              Reading Mail.        (line  98)
* mh-ps-print-toggle-color <1>:          Printing.            (line  18)
* mh-ps-print-toggle-faces:              Reading Mail.        (line 101)
* mh-ps-print-toggle-faces <1>:          Printing.            (line  26)
* mh-put-msg-in-seq:                     Sequences.           (line  27)
* mh-put-msg-in-seq <1>:                 Sequences.           (line  59)
* mh-quit:                               Folders.             (line  45)
* mh-quit <1>:                           Folders.             (line 307)
* mh-redistribute:                       Sending Mail.        (line  29)
* mh-redistribute <1>:                   Redistributing.      (line   6)
* mh-refile-msg:                         Folders.             (line  43)
* mh-refile-msg <1>:                     Folders.             (line 163)
* mh-refile-or-write-again:              Files and Pipes.     (line   6)
* mh-refile-or-write-again <1>:          Folders.             (line  11)
* mh-reply:                              Sending Mail.        (line  25)
* mh-reply <1>:                          Replying.            (line   6)
* mh-rescan-folder:                      Folders.             (line  32)
* mh-rescan-folder <1>:                  Folders.             (line 266)
* mh-rescan-folder <2>:                  Searching.           (line 161)
* mh-rescan-folder, example:             Incorporating Mail.  (line  89)
* mh-rmail:                              Reading Mail Tour.   (line   6)
* mh-rmail <1>:                          Reading Mail Tour.   (line  12)
* mh-rmail <2>:                          Leaving MH-E.        (line  12)
* mh-rmail <3>:                          Reading Mail.        (line   6)
* mh-rmail, example:                     Miscellaneous Commands and Options.
                                                              (line  42)
* mh-search:                             Folders.             (line  34)
* mh-search <1>:                         Folders.             (line 237)
* mh-search <2>:                         Tool Bar.            (line  38)
* mh-search <3>:                         Searching.           (line   6)
* mh-search <4>:                         Searching.           (line 191)
* mh-search-folder:                      Searching.           (line  78)
* mh-search-p:                           Folders.             (line 287)
* mh-send:                               Sending Mail.        (line  27)
* mh-send <1>:                           Composing.           (line  16)
* mh-send-letter:                        Editing Drafts.      (line  24)
* mh-send-letter <1>:                    Sending Message.     (line   6)
* mh-set-cmd-note:                       Scan Line Formats.   (line  32)
* mh-set-cmd-note <1>:                   Scan Line Formats.   (line  93)
* mh-set-cmd-note <2>:                   Scan Line Formats.   (line 240)
* mh-show:                               Reading Mail.        (line  24)
* mh-show <1>:                           Viewing.             (line   6)
* mh-show, example:                      Incorporating Mail.  (line  89)
* mh-show-mouse:                         Reading Mail.        (line 117)
* mh-show-mouse <1>:                     Viewing.             (line   6)
* mh-show-preferred-alternative:         Reading Mail.        (line  28)
* mh-show-preferred-alternative <1>:     Viewing Attachments. (line 125)
* mh-signature-separator-p:              Signature.           (line  14)
* mh-smail:                              Sending Mail Tour.   (line   6)
* mh-smail <1>:                          Processing Mail Tour.
                                                              (line  72)
* mh-smail <2>:                          Sending Mail.        (line   6)
* mh-smail <3>:                          Sending Mail.        (line  31)
* mh-smail <4>:                          Composing.           (line   6)
* mh-smail-other-window:                 Sending Mail.        (line  33)
* mh-smail-other-window <1>:             Composing.           (line   6)
* mh-sort-folder:                        Folders.             (line  36)
* mh-sort-folder <1>:                    Folders.             (line 266)
* mh-speed-contract-folder:              Speedbar.            (line  24)
* mh-speed-expand-folder:                Speedbar.            (line  21)
* mh-speed-refresh:                      Speedbar.            (line  27)
* mh-speed-view:                         Speedbar.            (line  19)
* mh-store-buffer:                       Files and Pipes.     (line  31)
* mh-store-msg:                          Reading Mail.        (line 113)
* mh-store-msg <1>:                      Files and Pipes.     (line  21)
* mh-thread-ancestor:                    Threading.           (line  31)
* mh-thread-ancestor <1>:                Threading.           (line  46)
* mh-thread-delete:                      Navigating.          (line  37)
* mh-thread-delete <1>:                  Threading.           (line  23)
* mh-thread-delete <2>:                  Threading.           (line  54)
* mh-thread-next-sibling:                Threading.           (line  27)
* mh-thread-next-sibling <1>:            Threading.           (line  46)
* mh-thread-previous-sibling:            Threading.           (line  29)
* mh-thread-previous-sibling <1>:        Threading.           (line  46)
* mh-thread-refile:                      Threading.           (line  21)
* mh-thread-refile <1>:                  Threading.           (line  54)
* mh-to-fcc:                             Editing Drafts.      (line  43)
* mh-to-fcc <1>:                         Editing Message.     (line  14)
* mh-to-field:                           Editing Drafts.      (line  31)
* mh-to-field <1>:                       Editing Message.     (line   6)
* mh-to-field <2>:                       Searching.           (line  19)
* mh-to-field <3>:                       Searching.           (line 137)
* mh-toggle-mh-decode-mime-flag:         Reading Mail.        (line  31)
* mh-toggle-mh-decode-mime-flag <1>:     Viewing Attachments. (line  11)
* mh-toggle-mime-buttons:                Reading Mail.        (line  76)
* mh-toggle-mime-buttons <1>:            Viewing Attachments. (line  88)
* mh-toggle-showing:                     Folders.             (line  47)
* mh-toggle-showing <1>:                 Folders.             (line 210)
* mh-toggle-threads:                     Threading.           (line  25)
* mh-toggle-threads <1>:                 Threading.           (line  40)
* mh-toggle-tick:                        Sequences.           (line  13)
* mh-toggle-tick <1>:                    Sequences.           (line  64)
* mh-undo:                               Navigating.          (line  37)
* mh-undo <1>:                           Folders.             (line  50)
* mh-undo <2>:                           Folders.             (line 177)
* mh-undo-folder:                        Folders.             (line  38)
* mh-undo-folder <1>:                    Folders.             (line 183)
* mh-update-sequences:                   Sequences.           (line  34)
* mh-update-sequences <1>:               Sequences.           (line 102)
* mh-version:                            Getting Started.     (line  11)
* mh-version <1>:                        Miscellaneous.       (line   8)
* mh-version <2>:                        Miscellaneous.       (line  12)
* mh-version <3>:                        Bug Reports.         (line   6)
* mh-version <4>:                        Getting MH-E.        (line  22)
* mh-visit-folder:                       Folders.             (line  41)
* mh-visit-folder <1>:                   Folders.             (line 224)
* mh-visit-folder <2>:                   Speedbar.            (line   6)
* mh-widen:                              Limits.              (line  27)
* mh-widen <1>:                          Limits.              (line  45)
* mh-widen <2>:                          Sequences.           (line  32)
* mh-widen <3>:                          Sequences.           (line  73)
* mh-write-msg-to-file:                  Reading Mail.        (line  38)
* mh-write-msg-to-file <1>:              Files and Pipes.     (line   6)
* mh-write-msg-to-file <2>:              Folders.             (line 171)
* mh-yank-behavior:                      Inserting Messages.  (line   6)
* mh-yank-cur-msg:                       Editing Drafts.      (line 116)
* mh-yank-cur-msg <1>:                   Inserting Letter.    (line   6)
* minibuffer-complete:                   Aliases.             (line  63)
* next-line:                             Processing Mail Tour.
                                                              (line  42)
* next-line <1>:                         Navigating.          (line  18)
* open-line:                             Editing Message.     (line  79)
* previous-line:                         Processing Mail Tour.
                                                              (line  42)
* previous-line <1>:                     Navigating.          (line  18)
* setq:                                  Conventions.         (line  57)
* setq <1>:                              Scan Line Formats.   (line  93)
* speedbar:                              Speedbar.            (line   6)
* trivial-cite:                          Inserting Letter.    (line  65)


File: mh-e.info,  Node: Option Index,  Next: Concept Index,  Prev: Command Index,  Up: Top

Option (Variable) Index
***********************

[index]
* Menu:

* exec-path:                             Getting Started.     (line  44)
* gnus-emphasis-alist:                   Viewing.             (line 118)
* gnus-secondary-select-methods:         Procmail.            (line  84)
* goto-address-highlight-p:              Viewing.             (line 111)
* mail-citation-hook:                    Editing Drafts.      (line 165)
* mail-citation-hook <1>:                Inserting Letter.    (line  24)
* mail-citation-hook <2>:                Inserting Letter.    (line  36)
* mail-citation-hook <3>:                Inserting Letter.    (line  65)
* mail-mode-hook:                        Composing.           (line  34)
* mail-sources:                          Procmail.            (line  88)
* mail-user-agent:                       Sending Mail.        (line  11)
* mail-user-agent <1>:                   Procmail.            (line  90)
* message-mail-user-agent:               Procmail.            (line  91)
* mh-adaptive-cmd-note-flag:             Scan Line Formats.   (line  13)
* mh-adaptive-cmd-note-flag <1>:         Scan Line Formats.   (line  22)
* mh-adaptive-cmd-note-flag <2>:         Scan Line Formats.   (line  32)
* mh-adaptive-cmd-note-flag <3>:         Scan Line Formats.   (line  41)
* mh-adaptive-cmd-note-flag <4>:         Scan Line Formats.   (line 240)
* mh-adaptive-cmd-note-flag <5>:         Scan Line Formats.   (line 283)
* mh-after-commands-processed-hook:      Folders.             (line  76)
* mh-after-commands-processed-hook <1>:  Folders.             (line 193)
* mh-alias-completion-ignore-case-flag:  Aliases.             (line  28)
* mh-alias-completion-ignore-case-flag <1>: Aliases.          (line  75)
* mh-alias-expand-aliases-flag:          Aliases.             (line  31)
* mh-alias-expand-aliases-flag <1>:      Aliases.             (line  63)
* mh-alias-flash-on-comma:               Editing Message.     (line  32)
* mh-alias-flash-on-comma <1>:           Aliases.             (line  34)
* mh-alias-flash-on-comma <2>:           Aliases.             (line  91)
* mh-alias-insert-file:                  Aliases.             (line  37)
* mh-alias-insert-file <1>:              Aliases.             (line 196)
* mh-alias-insert-file <2>:              Aliases.             (line 199)
* mh-alias-insertion-location:           Aliases.             (line  40)
* mh-alias-insertion-location <1>:       Aliases.             (line 196)
* mh-alias-insertion-location <2>:       Aliases.             (line 205)
* mh-alias-local-users:                  Aliases.             (line  43)
* mh-alias-local-users <1>:              Aliases.             (line 142)
* mh-alias-local-users-prefix:           Aliases.             (line  45)
* mh-alias-local-users-prefix <1>:       Aliases.             (line 118)
* mh-alias-local-users-prefix <2>:       Aliases.             (line 126)
* mh-alias-passwd-gecos-comma-separator-flag: Aliases.        (line  48)
* mh-alias-passwd-gecos-comma-separator-flag <1>: Aliases.    (line 136)
* mh-alias-reloaded-hook:                Aliases.             (line  54)
* mh-alias-reloaded-hook <1>:            Aliases.             (line 149)
* mh-allowlist-msg-hook:                 Junk.                (line  49)
* mh-allowlist-preserves-sequences-flag: Sequences.           (line  49)
* mh-allowlist-preserves-sequences-flag <1>: Junk.            (line  40)
* mh-allowlist-preserves-sequences-flag <2>: Junk.            (line  85)
* mh-annotate-list:                      Sending Mail.        (line  73)
* mh-annotate-msg-hook:                  Sending Mail.        (line  66)
* mh-annotate-msg-hook <1>:              Sending Mail.        (line  73)
* mh-auto-fields-list:                   Identities.          (line  21)
* mh-auto-fields-list <1>:               Identities.          (line  81)
* mh-auto-fields-list <2>:               Identities.          (line 124)
* mh-auto-fields-prompt-flag:            Identities.          (line  24)
* mh-auto-fields-prompt-flag <1>:        Identities.          (line 109)
* mh-before-commands-processed-hook:     Folders.             (line  79)
* mh-before-commands-processed-hook <1>: Folders.             (line 193)
* mh-before-quit-hook:                   Folders.             (line  82)
* mh-before-quit-hook <1>:               Folders.             (line 315)
* mh-before-quit-hook, example:          Folders.             (line 315)
* mh-before-send-letter-hook:            Editing Drafts.      (line 168)
* mh-before-send-letter-hook <1>:        Sending Message.     (line  12)
* mh-blocklist-msg-hook:                 Junk.                (line  46)
* mh-bury-show-buffer-flag:              Reading Mail.        (line 130)
* mh-bury-show-buffer-flag <1>:          Miscellaneous Commands and Options.
                                                              (line  27)
* mh-bury-show-buffer-flag, example:     Options.             (line  15)
* mh-clean-message-header-flag:          Reading Mail.        (line 132)
* mh-clean-message-header-flag <1>:      Viewing.             (line  30)
* mh-cmd-note:                           Scan Line Formats.   (line 240)
* mh-compose-forward-as-mime-flag:       Sending Mail.        (line  41)
* mh-compose-forward-as-mime-flag <1>:   Forwarding.          (line  14)
* mh-compose-insertion:                  Editing Drafts.      (line 127)
* mh-compose-insertion <1>:              Adding Attachments.  (line  21)
* mh-compose-insertion <2>:              Adding Attachments.  (line 101)
* mh-compose-letter-function:            Sending Mail.        (line  44)
* mh-compose-letter-function <1>:        Composing.           (line  65)
* mh-compose-prompt-flag:                Sending Mail.        (line  46)
* mh-compose-prompt-flag <1>:            Composing.           (line  25)
* mh-compose-prompt-flag <2>:            Aliases.             (line  63)
* mh-compose-prompt-flag <3>:            Aliases.             (line  91)
* mh-compose-skipped-header-fields:      Editing Drafts.      (line 130)
* mh-compose-skipped-header-fields <1>:  Editing Message.     (line  19)
* mh-compose-space-does-completion-flag: Editing Drafts.      (line 134)
* mh-compose-space-does-completion-flag <1>: Editing Message. (line  32)
* mh-current-folder:                     Folders.             (line 193)
* mh-current-folder <1>:                 Sending Mail.        (line  73)
* mh-decode-mime-flag:                   Reading Mail.        (line 134)
* mh-decode-mime-flag <1>:               Viewing.             (line 118)
* mh-decode-mime-flag <2>:               Viewing Attachments. (line  11)
* mh-default-folder-for-message-function: Folder Selection.   (line  15)
* mh-default-folder-for-message-function <1>: Folder Selection.
                                                              (line  26)
* mh-default-folder-list:                Folder Selection.    (line  18)
* mh-default-folder-list <1>:            Folder Selection.    (line  37)
* mh-default-folder-must-exist-flag:     Folder Selection.    (line  20)
* mh-default-folder-must-exist-flag <1>: Folder Selection.    (line  46)
* mh-default-folder-prefix:              Folder Selection.    (line  22)
* mh-default-folder-prefix <1>:          Folder Selection.    (line  41)
* mh-delete-msg-hook:                    Reading Mail.        (line 192)
* mh-delete-msg-hook <1>:                Navigating.          (line  50)
* mh-delete-yanked-msg-window-flag:      Editing Drafts.      (line 136)
* mh-delete-yanked-msg-window-flag <1>:  Inserting Letter.    (line  32)
* mh-delete-yanked-msg-window-flag <2>:  Inserting Letter.    (line  51)
* mh-display-buttons-for-alternatives-flag: Reading Mail.     (line 137)
* mh-display-buttons-for-alternatives-flag <1>: Viewing Attachments.
                                                              (line 113)
* mh-display-buttons-for-inline-parts-flag: Reading Mail.     (line 140)
* mh-display-buttons-for-inline-parts-flag <1>: Viewing Attachments.
                                                              (line  88)
* mh-do-not-confirm-flag:                Reading Mail.        (line 143)
* mh-do-not-confirm-flag <1>:            Miscellaneous Commands and Options.
                                                              (line  14)
* mh-draft-folder:                       Getting Started.     (line  67)
* mh-extract-from-attribution-verb:      Editing Drafts.      (line 138)
* mh-extract-from-attribution-verb <1>:  Inserting Letter.    (line  18)
* mh-extract-from-attribution-verb <2>:  Inserting Letter.    (line  46)
* mh-fetch-x-image-url:                  Reading Mail.        (line 146)
* mh-fetch-x-image-url <1>:              Viewing.             (line  59)
* mh-find-path-hook:                     Getting Started.     (line  67)
* mh-flists-present-flag:                Getting Started.     (line  56)
* mh-folder-address:                     Folders.             (line 102)
* mh-folder-address <1>:                 Scan Line Formats.   (line 185)
* mh-folder-allowlisted:                 Junk.                (line  57)
* mh-folder-blocklisted:                 Junk.                (line  55)
* mh-folder-body:                        Folders.             (line 104)
* mh-folder-body <1>:                    Scan Line Formats.   (line 112)
* mh-folder-cur-msg-number:              Folders.             (line 106)
* mh-folder-cur-msg-number <1>:          Scan Line Formats.   (line 119)
* mh-folder-date:                        Folders.             (line 108)
* mh-folder-date <1>:                    Scan Line Formats.   (line 131)
* mh-folder-deleted:                     Folders.             (line 110)
* mh-folder-deleted <1>:                 Scan Line Formats.   (line 140)
* mh-folder-followup:                    Folders.             (line 112)
* mh-folder-followup <1>:                Scan Line Formats.   (line 219)
* mh-folder-font-lock-keywords:          Scan Line Formats.   (line 112)
* mh-folder-font-lock-keywords <1>:      Scan Line Formats.   (line 119)
* mh-folder-font-lock-keywords <2>:      Scan Line Formats.   (line 131)
* mh-folder-font-lock-keywords <3>:      Scan Line Formats.   (line 140)
* mh-folder-font-lock-keywords <4>:      Scan Line Formats.   (line 151)
* mh-folder-font-lock-keywords <5>:      Scan Line Formats.   (line 185)
* mh-folder-font-lock-keywords <6>:      Scan Line Formats.   (line 196)
* mh-folder-font-lock-keywords <7>:      Scan Line Formats.   (line 207)
* mh-folder-font-lock-keywords <8>:      Scan Line Formats.   (line 219)
* mh-folder-mode-hook:                   Folders.             (line  84)
* mh-folder-mode-hook <1>:               Folders.             (line 135)
* mh-folder-mode-hook, example:          Folders.             (line 139)
* mh-folder-msg-number:                  Folders.             (line 114)
* mh-folder-msg-number <1>:              Scan Line Formats.   (line 151)
* mh-folder-refiled:                     Folders.             (line 116)
* mh-folder-refiled <1>:                 Scan Line Formats.   (line 196)
* mh-folder-scan-format:                 Folders.             (line 123)
* mh-folder-sent-to-me-hint:             Folders.             (line 118)
* mh-folder-sent-to-me-sender:           Scan Line Formats.   (line 207)
* mh-folder-subject:                     Folders.             (line 128)
* mh-folder-subject <1>:                 Scan Line Formats.   (line 219)
* mh-folder-tick:                        Folders.             (line 130)
* mh-folder-to:                          Folders.             (line 132)
* mh-folder-to <1>:                      Scan Line Formats.   (line 185)
* mh-forward-hook:                       Sending Mail.        (line  68)
* mh-forward-hook <1>:                   Forwarding.          (line   6)
* mh-forward-subject-format:             Sending Mail.        (line  49)
* mh-forward-subject-format <1>:         Forwarding.          (line  26)
* mh-graphical-emphasis-flag:            Reading Mail.        (line 151)
* mh-graphical-emphasis-flag <1>:        Viewing.             (line 118)
* mh-graphical-smileys-flag:             Reading Mail.        (line 149)
* mh-graphical-smileys-flag <1>:         Viewing.             (line 118)
* mh-highlight-citation-style:           Reading Mail.        (line 153)
* mh-highlight-citation-style <1>:       Viewing.             (line 103)
* mh-identity-default:                   Identities.          (line  27)
* mh-identity-default <1>:               Identities.          (line  72)
* mh-identity-handlers:                  Identities.          (line  30)
* mh-identity-handlers <1>:              Identities.          (line 128)
* mh-identity-list:                      Identities.          (line  32)
* mh-identity-list <1>:                  Identities.          (line  39)
* mh-identity-list <2>:                  Identities.          (line 124)
* mh-identity-list <3>:                  Identities.          (line 128)
* mh-identity-list <4>:                  Identities.          (line 136)
* mh-inbox:                              Getting Started.     (line  67)
* mh-inc-folder-hook:                    Incorporating Mail.  (line  22)
* mh-inc-folder-hook <1>:                Incorporating Mail.  (line  83)
* mh-inc-folder-hook, example:           Incorporating Mail.  (line  89)
* mh-inc-prog:                           Incorporating Mail.  (line  15)
* mh-inc-prog <1>:                       Incorporating Mail.  (line  40)
* mh-inc-spool-list:                     Incorporating Mail.  (line  17)
* mh-inc-spool-list <1>:                 Incorporating Mail.  (line  51)
* mh-ins-buf-prefix:                     Editing Drafts.      (line 141)
* mh-ins-buf-prefix <1>:                 Editing Message.     (line  61)
* mh-ins-buf-prefix <2>:                 Inserting Letter.    (line   6)
* mh-ins-buf-prefix <3>:                 Inserting Letter.    (line  24)
* mh-ins-buf-prefix <4>:                 Inserting Letter.    (line  65)
* mh-ins-buf-prefix <5>:                 Inserting Messages.  (line   6)
* mh-insert-signature-hook:              Editing Drafts.      (line 173)
* mh-insert-signature-hook <1>:          Signature.           (line  30)
* mh-insert-x-mailer-flag:               Sending Mail.        (line  51)
* mh-insert-x-mailer-flag <1>:           Composing.           (line  29)
* mh-interpret-number-as-range-flag:     Ranges.              (line  42)
* mh-interpret-number-as-range-flag <1>: Ranges.              (line  45)
* mh-invisible-header-fields:            Reading Mail.        (line 158)
* mh-invisible-header-fields <1>:        Viewing.             (line  30)
* mh-invisible-header-fields-compiled:   Inserting Messages.  (line   6)
* mh-invisible-header-fields-default:    Reading Mail.        (line 155)
* mh-invisible-header-fields-default <1>: Viewing.            (line  30)
* mh-junk-background:                    Junk.                (line  30)
* mh-junk-background <1>:                Junk.                (line  90)
* mh-junk-disposition:                   Junk.                (line  32)
* mh-junk-disposition <1>:               Junk.                (line  73)
* mh-junk-program:                       Junk.                (line  34)
* mh-junk-program <1>:                   Junk.                (line  67)
* mh-kill-folder-suppress-prompt-functions: Folders.          (line 287)
* mh-kill-folder-suppress-prompt-hook:   Folders.             (line  87)
* mh-large-folder:                       Folders.             (line  63)
* mh-large-folder <1>:                   Folders.             (line 224)
* mh-large-folder <2>:                   Threading.           (line  40)
* mh-large-folder <3>:                   Threading.           (line  62)
* mh-letter-complete-function:           Editing Drafts.      (line 144)
* mh-letter-complete-function <1>:       Editing Message.     (line  32)
* mh-letter-fill-column:                 Editing Drafts.      (line 147)
* mh-letter-fill-column <1>:             Editing Message.     (line  55)
* mh-letter-header-field:                Editing Drafts.      (line 179)
* mh-letter-header-field <1>:            Editing Message.     (line  19)
* mh-letter-mode-hook:                   Sending Mail.        (line  70)
* mh-letter-mode-hook <1>:               Composing.           (line  34)
* mh-letter-mode-hook <2>:               Composing.           (line  65)
* mh-lib:                                Getting Started.     (line  56)
* mh-lib-progs:                          Getting Started.     (line  56)
* mh-lpr-command-format:                 Reading Mail.        (line 160)
* mh-lpr-command-format <1>:             Printing.            (line   6)
* mh-lpr-command-format <2>:             Printing.            (line  40)
* mh-lpr-command-format, example:        Options.             (line   6)
* mh-max-inline-image-height:            Reading Mail.        (line 162)
* mh-max-inline-image-height <1>:        Viewing Attachments. (line 104)
* mh-max-inline-image-width:             Reading Mail.        (line 165)
* mh-max-inline-image-width <1>:         Viewing Attachments. (line 104)
* mh-mh-folder-sent-to-me-hint:          Scan Line Formats.   (line 207)
* mh-mh-to-mime-args:                    Adding Attachments.  (line 213)
* mh-mh-to-mime-hook:                    Editing Drafts.      (line 171)
* mh-mh-to-mime-hook <1>:                Adding Attachments.  (line 222)
* mh-mhl-format-file:                    Reading Mail.        (line 168)
* mh-mhl-format-file <1>:                Viewing.             (line  87)
* mh-mhl-format-file, example:           Options.             (line  27)
* mh-mime-save-parts-default-directory:  Reading Mail.        (line 171)
* mh-mime-save-parts-default-directory <1>: Viewing Attachments.
                                                              (line  72)
* mh-mime-save-parts-default-directory <2>: Viewing Attachments.
                                                              (line  80)
* mh-mml-method-default:                 Editing Drafts.      (line 149)
* mh-mml-method-default <1>:             Sending PGP.         (line  27)
* mh-mml-method-default <2>:             Sending PGP.         (line  34)
* mh-new-messages-folders:               Folders.             (line  59)
* mh-new-messages-folders <1>:           Folders.             (line 240)
* mh-new-messages-folders <2>:           Folders.             (line 254)
* mh-new-messages-folders <3>:           Folders.             (line 260)
* mh-note-copied:                        Scan Line Formats.   (line 246)
* mh-note-cur:                           Scan Line Formats.   (line 119)
* mh-note-cur <1>:                       Scan Line Formats.   (line 249)
* mh-note-deleted:                       Scan Line Formats.   (line 140)
* mh-note-deleted <1>:                   Scan Line Formats.   (line 253)
* mh-note-dist:                          Scan Line Formats.   (line 256)
* mh-note-forw:                          Scan Line Formats.   (line 259)
* mh-note-printed:                       Scan Line Formats.   (line 262)
* mh-note-refiled:                       Scan Line Formats.   (line 196)
* mh-note-refiled <1>:                   Scan Line Formats.   (line 265)
* mh-note-repl:                          Scan Line Formats.   (line 268)
* mh-note-seq:                           Scan Line Formats.   (line 271)
* mh-pack-folder-hook:                   Folders.             (line  90)
* mh-pack-folder-hook <1>:               Folders.             (line 278)
* mh-path:                               Getting Started.     (line  44)
* mh-previous-seq:                       Getting Started.     (line  67)
* mh-print-background-flag:              Reading Mail.        (line 173)
* mh-print-background-flag <1>:          Printing.            (line   6)
* mh-print-background-flag <2>:          Printing.            (line  40)
* mh-progs:                              Getting Started.     (line  56)
* mh-progs <1>:                          Incorporating Mail.  (line  40)
* mh-progs <2>:                          Scan Line Formats.   (line  86)
* mh-quit-hook:                          Folders.             (line  93)
* mh-quit-hook <1>:                      Folders.             (line 315)
* mh-quit-hook, example:                 Folders.             (line 315)
* mh-recenter-summary-flag:              Folders.             (line  66)
* mh-recenter-summary-flag <1>:          Folders.             (line 217)
* mh-recursive-folders-flag:             Folders.             (line  68)
* mh-recursive-folders-flag <1>:         Folders.             (line 260)
* mh-recursive-folders-flag <2>:         Folders.             (line 282)
* mh-redist-full-contents-flag:          Sending Mail.        (line  54)
* mh-redist-full-contents-flag <1>:      Redistributing.      (line  16)
* mh-refile-msg-hook:                    Folders.             (line  95)
* mh-refile-msg-hook <1>:                Folders.             (line 163)
* mh-refile-preserves-sequences-flag:    Sequences.           (line  41)
* mh-refile-preserves-sequences-flag <1>: Sequences.          (line  90)
* mh-reply-default-reply-to:             Sending Mail.        (line  57)
* mh-reply-default-reply-to <1>:         Replying.            (line  21)
* mh-reply-show-message-flag:            Sending Mail.        (line  60)
* mh-reply-show-message-flag <1>:        Replying.            (line  51)
* mh-scan-body-regexp:                   Scan Line Formats.   (line 112)
* mh-scan-cur-msg-number-regexp:         Scan Line Formats.   (line 120)
* mh-scan-cur-msg-number-regexp <1>:     Scan Line Formats.   (line 248)
* mh-scan-cur-msg-number-regexp, example: Scan Line Formats.  (line 309)
* mh-scan-date-regexp:                   Scan Line Formats.   (line 132)
* mh-scan-deleted-msg-regexp:            Scan Line Formats.   (line 141)
* mh-scan-deleted-msg-regexp <1>:        Scan Line Formats.   (line 252)
* mh-scan-deleted-msg-regexp, example:   Scan Line Formats.   (line 314)
* mh-scan-format-file:                   Scan Line Formats.   (line  16)
* mh-scan-format-file <1>:               Scan Line Formats.   (line  32)
* mh-scan-format-file <2>:               Scan Line Formats.   (line  41)
* mh-scan-format-file <3>:               Scan Line Formats.   (line  51)
* mh-scan-format-file <4>:               Scan Line Formats.   (line 161)
* mh-scan-format-file <5>:               Scan Line Formats.   (line 167)
* mh-scan-format-file <6>:               Scan Line Formats.   (line 283)
* mh-scan-format-file, example:          Scan Line Formats.   (line 283)
* mh-scan-format-mh:                     Scan Line Formats.   (line  41)
* mh-scan-format-mh <1>:                 Scan Line Formats.   (line  51)
* mh-scan-format-mh <2>:                 Scan Line Formats.   (line  72)
* mh-scan-format-nmh:                    Folders.             (line 117)
* mh-scan-format-nmh <1>:                Folders.             (line 122)
* mh-scan-format-nmh <2>:                Scan Line Formats.   (line  41)
* mh-scan-format-nmh <3>:                Scan Line Formats.   (line  51)
* mh-scan-format-nmh <4>:                Scan Line Formats.   (line 207)
* mh-scan-good-msg-regexp:               Scan Line Formats.   (line 152)
* mh-scan-good-msg-regexp, example:      Scan Line Formats.   (line 303)
* mh-scan-msg-format-regexp:             Scan Line Formats.   (line 162)
* mh-scan-msg-format-string:             Scan Line Formats.   (line 168)
* mh-scan-msg-number-regexp:             Scan Line Formats.   (line 173)
* mh-scan-msg-number-regexp, example:    Scan Line Formats.   (line 298)
* mh-scan-msg-overflow-regexp:           Scan Line Formats.   (line 178)
* mh-scan-msg-search-regexp:             Scan Line Formats.   (line 181)
* mh-scan-msg-search-regexp, example:    Scan Line Formats.   (line 298)
* mh-scan-prog:                          Scan Line Formats.   (line  19)
* mh-scan-prog <1>:                      Scan Line Formats.   (line  86)
* mh-scan-rcpt-regexp:                   Scan Line Formats.   (line 186)
* mh-scan-refiled-msg-regexp:            Scan Line Formats.   (line 197)
* mh-scan-refiled-msg-regexp <1>:        Scan Line Formats.   (line 264)
* mh-scan-refiled-msg-regexp, example:   Scan Line Formats.   (line 314)
* mh-scan-sent-to-me-sender-regexp:      Folders.             (line 117)
* mh-scan-sent-to-me-sender-regexp <1>:  Folders.             (line 122)
* mh-scan-sent-to-me-sender-regexp <2>:  Scan Line Formats.   (line 131)
* mh-scan-sent-to-me-sender-regexp <3>:  Scan Line Formats.   (line 208)
* mh-scan-subject-regexp:                Scan Line Formats.   (line 220)
* mh-scan-valid-regexp:                  Scan Line Formats.   (line 105)
* mh-scan-valid-regexp, example:         Scan Line Formats.   (line 291)
* mh-search-folder:                      Searching.           (line  75)
* mh-search-folder <1>:                  Searching.           (line 152)
* mh-search-mode-hook:                   Searching.           (line  70)
* mh-search-mode-hook <1>:               Searching.           (line 141)
* mh-search-program:                     Searching.           (line  65)
* mh-search-program <1>:                 Searching.           (line 191)
* mh-seen-list:                          Sequences.           (line 110)
* mh-send-prog:                          Sending Message.     (line  16)
* mh-show-buffer-mode-line-buffer-id:    Reading Mail.        (line 176)
* mh-show-buffer-mode-line-buffer-id <1>: Viewing.            (line 146)
* mh-show-cc:                            Reading Mail.        (line 201)
* mh-show-cc <1>:                        Viewing.             (line  24)
* mh-show-date:                          Reading Mail.        (line 203)
* mh-show-date <1>:                      Viewing.             (line  24)
* mh-show-from:                          Reading Mail.        (line 205)
* mh-show-from <1>:                      Viewing.             (line  24)
* mh-show-header:                        Reading Mail.        (line 207)
* mh-show-header <1>:                    Viewing.             (line  24)
* mh-show-hook:                          Reading Mail.        (line 194)
* mh-show-hook <1>:                      Viewing.             (line 138)
* mh-show-maximum-size:                  Reading Mail.        (line 179)
* mh-show-maximum-size <1>:              Viewing.             (line  18)
* mh-show-mode-hook:                     Reading Mail.        (line 196)
* mh-show-mode-hook <1>:                 Viewing.             (line 138)
* mh-show-pgg-bad:                       Reading Mail.        (line 209)
* mh-show-pgg-bad <1>:                   Reading PGP.         (line  70)
* mh-show-pgg-good:                      Reading Mail.        (line 211)
* mh-show-pgg-good <1>:                  Reading PGP.         (line  70)
* mh-show-pgg-unknown:                   Reading Mail.        (line 213)
* mh-show-pgg-unknown <1>:               Reading PGP.         (line  70)
* mh-show-signature:                     Reading Mail.        (line 215)
* mh-show-signature <1>:                 Viewing.             (line 132)
* mh-show-subject:                       Reading Mail.        (line 217)
* mh-show-subject <1>:                   Viewing.             (line  24)
* mh-show-threads-flag:                  Threading.           (line  37)
* mh-show-threads-flag <1>:              Threading.           (line  40)
* mh-show-to:                            Reading Mail.        (line 219)
* mh-show-to <1>:                        Viewing.             (line  24)
* mh-show-use-xface-flag:                Reading Mail.        (line 182)
* mh-show-use-xface-flag <1>:            Viewing.             (line  43)
* mh-show-xface:                         Reading Mail.        (line 221)
* mh-show-xface <1>:                     Viewing.             (line  55)
* mh-signature-file-name:                Editing Drafts.      (line 152)
* mh-signature-file-name <1>:            Signature.           (line   9)
* mh-signature-file-name <2>:            Signature.           (line  14)
* mh-signature-file-name <3>:            Signature.           (line  30)
* mh-signature-file-name <4>:            Identities.          (line  59)
* mh-signature-separator:                Signature.           (line  14)
* mh-signature-separator-flag:           Editing Drafts.      (line 154)
* mh-signature-separator-flag <1>:       Signature.           (line  23)
* mh-signature-separator-regexp:         Signature.           (line  14)
* mh-sortm-args:                         Folders.             (line  71)
* mh-sortm-args <1>:                     Folders.             (line 301)
* mh-speed-update-interval:              Speedbar.            (line  41)
* mh-speedbar-folder:                    Speedbar.            (line  48)
* mh-speedbar-folder-with-unseen-messages: Speedbar.          (line  50)
* mh-speedbar-selected-folder:           Speedbar.            (line  52)
* mh-speedbar-selected-folder-with-unseen-messages: Speedbar. (line  54)
* mh-store-default-directory:            Reading Mail.        (line 184)
* mh-store-default-directory <1>:        Files and Pipes.     (line  21)
* mh-summary-height:                     Reading Mail.        (line 186)
* mh-summary-height <1>:                 Miscellaneous Commands and Options.
                                                              (line  20)
* mh-sys-path:                           Getting Started.     (line  44)
* mh-tick-seq:                           Sequences.           (line  44)
* mh-tick-seq <1>:                       Sequences.           (line  68)
* mh-tick-seq <2>:                       Sequences.           (line 102)
* mh-ticked-messages-folders:            Folders.             (line  61)
* mh-ticked-messages-folders <1>:        Folders.             (line 248)
* mh-ticked-messages-folders <2>:        Folders.             (line 260)
* mh-tool-bar-folder-buttons:            Tool Bar.            (line  12)
* mh-tool-bar-folder-buttons <1>:        Tool Bar.            (line  30)
* mh-tool-bar-letter-buttons:            Tool Bar.            (line  15)
* mh-tool-bar-letter-buttons <1>:        Tool Bar.            (line  30)
* mh-tool-bar-search-function:           Tool Bar.            (line  18)
* mh-tool-bar-search-function <1>:       Tool Bar.            (line  38)
* mh-unseen-seq:                         Getting Started.     (line  67)
* mh-unseen-updated-hook:                Sequences.           (line  55)
* mh-unseen-updated-hook <1>:            Sequences.           (line 110)
* mh-update-sequences-after-mh-show-flag: Sequences.          (line  46)
* mh-update-sequences-after-mh-show-flag <1>: Sequences.      (line 102)
* mh-user-path:                          Getting Started.     (line  67)
* mh-variant:                            Getting Started.     (line  44)
* mh-variant-in-use:                     Getting Started.     (line  44)
* mh-x-face-file:                        Editing Drafts.      (line 156)
* mh-x-face-file <1>:                    Picture.             (line   6)
* mh-x-face-file <2>:                    Picture.             (line  31)
* mh-xemacs-tool-bar-position:           Tool Bar.            (line  21)
* mh-xemacs-tool-bar-position <1>:       Tool Bar.            (line  49)
* mh-xemacs-use-tool-bar-flag:           Tool Bar.            (line  23)
* mh-xemacs-use-tool-bar-flag <1>:       Tool Bar.            (line  43)
* mh-yank-behavior:                      Replying.            (line  44)
* mh-yank-behavior <1>:                  Editing Drafts.      (line 159)
* mh-yank-behavior <2>:                  Inserting Letter.    (line  24)
* mh-yank-behavior <3>:                  Inserting Letter.    (line  36)
* mh-yank-behavior <4>:                  Inserting Letter.    (line  61)
* mh-yank-behavior <5>:                  Inserting Letter.    (line  65)
* mh-yank-behavior <6>:                  Inserting Letter.    (line  74)
* mh-yank-behavior <7>:                  Inserting Messages.  (line   6)
* mm-discouraged-alternatives:           Viewing Attachments. (line 120)
* mm-text-html-renderer:                 HTML.                (line  17)
* mm-text-html-renderer <1>:             HTML.                (line  26)
* mm-text-html-renderer <2>:             HTML.                (line  79)
* nnmail-keep-last-article:              Procmail.            (line  95)
* pgg-encrypt-for-me:                    Sending PGP.         (line  42)
* ps-print-color-p:                      Printing.            (line  18)
* read-mail-command:                     Reading Mail.        (line  11)
* set-mh-cmd-note, example:              Scan Line Formats.   (line 309)
* text-mode-hook:                        Composing.           (line  34)
* transient-mark-mode:                   Ranges.              (line  35)


File: mh-e.info,  Node: Concept Index,  Prev: Option Index,  Up: Top

Concept Index
*************

[index]
* Menu:

* *MH-E Folders*:                        Folders.             (line 266)
* *MH-E Folders* <1>:                    Miscellaneous.       (line  24)
* *MH-E Help*:                           Miscellaneous.       (line  26)
* *MH-E Info*:                           Miscellaneous.       (line  12)
* *MH-E Info* <1>:                       Miscellaneous.       (line  29)
* *MH-E Log*:                            Junk.                (line  90)
* *MH-E Log* <1>:                        Miscellaneous.       (line  31)
* *MH-E Mail Delivery*:                  Sending Message.     (line   6)
* *MH-E Mail Delivery* <1>:              Miscellaneous.       (line  34)
* *MH-E Recipients*:                     Checking Recipients. (line   6)
* *MH-E Recipients* <1>:                 Miscellaneous.       (line  37)
* *MH-E Sequences*:                      Sequences.           (line  83)
* *MH-E Sequences* <1>:                  Miscellaneous.       (line  40)
* *mh-temp*:                             Miscellaneous.       (line  43)
* +inbox:                                Incorporating Mail.  (line  26)
* +inbox <1>:                            Reading Mail.        (line   6)
* +mhe-index:                            Searching.           (line 152)
* .emacs:                                Conventions.         (line  57)
* .emacs <1>:                            Getting Started.     (line  60)
* .emacs <2>:                            Incorporating Mail.  (line  34)
* .emacs <3>:                            HTML.                (line  84)
* .emacs <4>:                            Miscellaneous Commands and Options.
                                                              (line  35)
* .emacs <5>:                            Composing.           (line   6)
* .face:                                 Picture.             (line   6)
* .mhe-x-image-cache:                    Viewing.             (line  83)
* .mh_profile:                           Folders.             (line 301)
* .mh_profile <1>:                       Forwarding.          (line  14)
* .procmailrc:                           Incorporating Mail.  (line  56)
* .procmailrc <1>:                       Junk.                (line  98)
* .procmailrc <2>:                       Procmail.            (line  12)
* .signature:                            Signature.           (line   9)
* .spamassassin/user_prefs:              Junk.                (line 147)
* /etc/mailcap:                          Viewing Attachments. (line  48)
* /etc/mime.types:                       Adding Attachments.  (line  32)
* /etc/nmh/MailAliases:                  Aliases.             (line 106)
* /etc/passwd:                           Aliases.             (line 111)
* ~:                                     Conventions.         (line 103)
* abnormal hooks:                        Conventions.         (line  70)
* ali:                                   Aliases.             (line 106)
* alias completion:                      Editing Message.     (line  32)
* aliases:                               Aliases.             (line   6)
* Aliasfile MH profile component:        Aliases.             (line 106)
* allowlisting:                          Junk.                (line  11)
* alternatives:                          Viewing Attachments. (line 113)
* ancestor, in threads:                  Threading.           (line  12)
* attachments:                           Viewing Attachments. (line   6)
* attachments, alternatives:             Viewing Attachments. (line 113)
* attachments, inline:                   Viewing Attachments. (line  88)
* attachments, inserting:                Adding Attachments.  (line 101)
* attachments, saving:                   Viewing Attachments. (line  63)
* attachments, viewing:                  Viewing Attachments. (line  37)
* Bcc header field:                      Editing Message.     (line   6)
* Bill Wohler:                           Preface.             (line  39)
* Bill Wohler <1>:                       History.             (line   6)
* Bill Wohler <2>:                       From Bill Wohler.    (line   6)
* blocklisting:                          Junk.                (line  11)
* body parts:                            Viewing Attachments. (line   6)
* bogofilter:                            Junk.                (line  60)
* bogofilter <1>:                        Junk.                (line 181)
* boldface, showing:                     Viewing.             (line 118)
* Brian Reid:                            History.             (line   6)
* Brian Reid <1>:                        From Brian Reid.     (line   6)
* browser, gnus-w3m:                     HTML.                (line  29)
* browser, html2text:                    HTML.                (line  33)
* browser, links:                        HTML.                (line  37)
* browser, lynx:                         HTML.                (line  45)
* browser, w3m:                          HTML.                (line  29)
* browser, w3m <1>:                      HTML.                (line  62)
* browser, w3m <2>:                      HTML.                (line  72)
* browser, w3m-standalone:               HTML.                (line  72)
* buffers, *MH-E Folders*:               Folders.             (line 266)
* buffers, *MH-E Folders* <1>:           Miscellaneous.       (line  24)
* buffers, *MH-E Help*:                  Miscellaneous.       (line  26)
* buffers, *MH-E Info*:                  Miscellaneous.       (line  12)
* buffers, *MH-E Info* <1>:              Miscellaneous.       (line  29)
* buffers, *MH-E Log*:                   Junk.                (line  90)
* buffers, *MH-E Log* <1>:               Miscellaneous.       (line  31)
* buffers, *MH-E Mail Delivery*:         Sending Message.     (line   6)
* buffers, *MH-E Mail Delivery* <1>:     Miscellaneous.       (line  34)
* buffers, *MH-E Recipients*:            Checking Recipients. (line   6)
* buffers, *MH-E Recipients* <1>:        Miscellaneous.       (line  37)
* buffers, *MH-E Sequences*:             Sequences.           (line  83)
* buffers, *MH-E Sequences* <1>:         Miscellaneous.       (line  40)
* buffers, *mh-temp*:                    Miscellaneous.       (line  43)
* bugs:                                  Bug Reports.         (line   6)
* built-in help:                         Using This Manual.   (line   9)
* burst:                                 Digests.             (line  13)
* buttons:                               Viewing Attachments. (line  21)
* Cc header field:                       Editing Message.     (line   6)
* change log:                            Getting MH-E.        (line  11)
* checking recipients:                   Checking Recipients. (line   6)
* citations, highlighting:               Viewing.             (line 103)
* commands:                              Conventions.         (line  10)
* commands, MH:                          Conventions.         (line  10)
* commands, shell:                       Conventions.         (line  10)
* commands, Unix:                        Conventions.         (line  10)
* compface:                              Picture.             (line  17)
* completion:                            Conventions.         (line  88)
* completion <1>:                        Editing Message.     (line  32)
* completion, folders:                   Folder Selection.    (line   6)
* components:                            Composing.           (line  34)
* composing mail:                        Composing.           (line   6)
* content description:                   Adding Attachments.  (line  45)
* Content-Disposition header field:      Viewing Attachments. (line 104)
* Content-Transfer-Encoding header field: Junk.               (line 265)
* Content-Type header field:             Junk.                (line 265)
* contributed software:                  Getting MH-E.        (line  29)
* conventions, Emacs:                    Conventions.         (line   6)
* conventions, key names:                Conventions.         (line  17)
* convert:                               Viewing.             (line  59)
* cur sequence:                          Sequences.           (line  90)
* cur sequence <1>:                      Sequences.           (line 102)
* cur sequence <2>:                      Junk.                (line  85)
* customization group, mh:               Options.             (line  33)
* customization group, mh-alias:         Aliases.             (line  25)
* customization group, mh-folder:        Folders.             (line  57)
* customization group, mh-folder-selection: Folder Selection. (line  12)
* customization group, mh-identity:      Identities.          (line  19)
* customization group, mh-inc:           Incorporating Mail.  (line  13)
* customization group, mh-junk:          Junk.                (line  27)
* customization group, mh-letter:        Editing Drafts.      (line 124)
* customization group, mh-range:         Ranges.              (line  39)
* customization group, mh-scan-line-formats: Scan Line Formats.
                                                              (line  10)
* customization group, mh-search:        Searching.           (line  62)
* customization group, mh-sending-mail:  Sending Mail.        (line  37)
* customization group, mh-sequences:     Sequences.           (line  38)
* customization group, mh-sequences <1>: Junk.                (line  37)
* customization group, mh-show:          Reading Mail.        (line 127)
* customization group, mh-speedbar:      Speedbar.            (line  37)
* customization group, mh-thread:        Threading.           (line  35)
* customization group, mh-tool-bar:      Tool Bar.            (line   9)
* customization group, pgg:              Reading PGP.         (line  75)
* customization group, pgg <1>:          Sending PGP.         (line  39)
* customizing MH-E:                      Options.             (line   6)
* Dcc header field:                      Editing Message.     (line   6)
* Debian:                                Getting Started.     (line  23)
* Debian <1>:                            Getting MH-E.        (line  19)
* decoding RFC 2047:                     Scan Line Formats.   (line  72)
* decrypting messages:                   Reading PGP.         (line  31)
* deleting messages:                     Navigating.          (line  23)
* digests:                               Digests.             (line   6)
* dist:                                  Redistributing.      (line   6)
* documentation:                         Getting MH-E.        (line  29)
* draft:                                 Composing.           (line   6)
* draft <1>:                             Replying.            (line  30)
* draft <2>:                             Forwarding.          (line   6)
* draft <3>:                             Editing Again.       (line   6)
* draft <4>:                             Editing Drafts.      (line   6)
* draft folder:                          Composing.           (line  16)
* Draft-Folder MH profile component:     Getting Started.     (line  67)
* editing draft:                         Editing Drafts.      (line   6)
* editing header:                        Editing Message.     (line   6)
* editing message:                       Miscellaneous Commands and Options.
                                                              (line   8)
* Emacs:                                 Preface.             (line   6)
* Emacs <1>:                             Conventions.         (line   6)
* Emacs commands:                        Conventions.         (line  10)
* Emacs Lisp Manual:                     Using This Manual.   (line  35)
* Emacs, built-in help:                  Using This Manual.   (line   9)
* Emacs, completion:                     Conventions.         (line  88)
* Emacs, conventions:                    Conventions.         (line   6)
* Emacs, customizing:                    Options.             (line   6)
* Emacs, Emacs Lisp Manual:              Using This Manual.   (line  35)
* Emacs, faces:                          Conventions.         (line  65)
* Emacs, file completion:                Conventions.         (line  88)
* Emacs, folder completion:              Conventions.         (line  88)
* Emacs, info:                           Using This Manual.   (line   9)
* Emacs, info <1>:                       Using This Manual.   (line  35)
* Emacs, interrupting:                   Conventions.         (line 109)
* Emacs, mark:                           Conventions.         (line  80)
* Emacs, minibuffer:                     Conventions.         (line  88)
* Emacs, notification of new mail:       Incorporating Mail.  (line  34)
* Emacs, online help:                    Using This Manual.   (line  35)
* Emacs, options:                        Conventions.         (line  60)
* Emacs, packages, mm-decode:            Viewing Attachments. (line  11)
* Emacs, packages, ps-print:             Printing.            (line  31)
* Emacs, packages, supercite:            Inserting Letter.    (line  36)
* Emacs, packages, trivial-cite:         Inserting Letter.    (line  74)
* Emacs, packages, x-face:               Viewing.             (line  55)
* Emacs, point:                          Conventions.         (line  80)
* Emacs, prefix argument:                Conventions.         (line  39)
* Emacs, quitting:                       Conventions.         (line 109)
* Emacs, quitting <1>:                   Leaving MH-E.        (line   6)
* Emacs, region:                         Conventions.         (line  80)
* Emacs, setting options:                Options.             (line   6)
* Emacs, terms:                          Conventions.         (line   6)
* Emacs, variables:                      Conventions.         (line  57)
* emacsclient:                           Incorporating Mail.  (line  71)
* email addresses, highlighting:         Viewing.             (line 111)
* emphasis:                              Viewing.             (line 118)
* encrypted messages:                    Reading PGP.         (line   6)
* encrypting messages:                   Sending PGP.         (line   6)
* exiting:                               Folders.             (line 307)
* exporting folders:                     Leaving MH-E.        (line  16)
* expunging refiles and deletes:         Folders.             (line 177)
* Face header field:                     Viewing.             (line  43)
* Face header field <1>:                 Picture.             (line  12)
* faces:                                 Conventions.         (line  65)
* FAQ:                                   MH FAQ and Support.  (line   6)
* Fcc header field:                      Sending PGP.         (line  42)
* Fcc header field <1>:                  Identities.          (line  92)
* file:                                  Adding Attachments.  (line  32)
* file completion:                       Conventions.         (line  88)
* files:                                 Files and Pipes.     (line   6)
* files, .emacs:                         Conventions.         (line  57)
* files, .emacs <1>:                     Getting Started.     (line  60)
* files, .emacs <2>:                     Incorporating Mail.  (line  34)
* files, .emacs <3>:                     HTML.                (line  84)
* files, .emacs <4>:                     Miscellaneous Commands and Options.
                                                              (line  35)
* files, .emacs <5>:                     Composing.           (line   6)
* files, .face:                          Picture.             (line   6)
* files, .mhe-x-image-cache:             Viewing.             (line  83)
* files, .mh_profile:                    Folders.             (line 301)
* files, .mh_profile <1>:                Forwarding.          (line  14)
* files, .procmailrc:                    Incorporating Mail.  (line  56)
* files, .procmailrc <1>:                Junk.                (line  98)
* files, .procmailrc <2>:                Procmail.            (line  12)
* files, .signature:                     Signature.           (line   9)
* files, .spamassassin/user_prefs:       Junk.                (line 147)
* files, /etc/mailcap:                   Viewing Attachments. (line  48)
* files, /etc/mime.types:                Adding Attachments.  (line  32)
* files, /etc/nmh/MailAliases:           Aliases.             (line 106)
* files, /etc/passwd:                    Aliases.             (line 111)
* files, components:                     Composing.           (line  34)
* files, draft:                          Editing Again.       (line   6)
* files, MH-E-NEWS:                      Getting MH-E.        (line  22)
* files, mhl.reply:                      Replying.            (line   6)
* files, README:                         Getting MH-E.        (line  22)
* filling paragraphs:                    Editing Message.     (line  61)
* filters:                               Limits.              (line   6)
* flists:                                Speedbar.            (line  37)
* folder:                                Folders.             (line 163)
* Folder > Incorporate New Mail menu item: Incorporating Mail.
                                                              (line  10)
* Folder > List Folders menu item:       Folders.             (line  24)
* Folder > Pack Folder menu item:        Folders.             (line  28)
* Folder > Quit MH-E menu item:          Folders.             (line  45)
* Folder > Rescan Folder menu item:      Folders.             (line  32)
* Folder > Search... menu item:          Folders.             (line  34)
* Folder > Sort Folder menu item:        Folders.             (line  36)
* Folder > Toggle Show/Folder menu item: Folders.             (line  47)
* Folder > View New Messages menu item:  Folders.             (line  26)
* Folder > Visit a Folder... menu item:  Folders.             (line  41)
* folder completion:                     Conventions.         (line  88)
* Folder menu:                           Incorporating Mail.  (line   6)
* Folder menu <1>:                       Folders.             (line   6)
* Folder menu <2>:                       Menu Bar.            (line   6)
* Folder menu <3>:                       Menu Bar.            (line   6)
* folder navigation:                     Speedbar.            (line   6)
* folders:                               Processing Mail Tour.
                                                              (line  51)
* folders <1>:                           Folders.             (line   6)
* folders, +mhe-index:                   Searching.           (line 152)
* folders, completion:                   Folder Selection.    (line   6)
* folders, exporting:                    Leaving MH-E.        (line  16)
* folders, renaming:                     Folders.             (line 340)
* folders, selecting:                    Folder Selection.    (line   6)
* formail:                               Junk.                (line 238)
* forw:                                  Forwarding.          (line   6)
* forw MH profile component:             Forwarding.          (line  14)
* forwarding:                            Forwarding.          (line   6)
* From header field:                     Editing Message.     (line   6)
* From header field <1>:                 Identities.          (line  45)
* ftp:                                   Adding Attachments.  (line 120)
* ftp <1>:                               Adding Attachments.  (line 128)
* full training:                         Junk.                (line 193)
* functions:                             Conventions.         (line  10)
* getting MH-E:                          Getting MH-E.        (line   6)
* Gildea, Stephen:                       History.             (line   6)
* Gildea, Stephen <1>:                   From Stephen Gildea. (line   6)
* GNU mailutils MH:                      Getting Started.     (line  23)
* gnuclient:                             Incorporating Mail.  (line  71)
* GnuPG:                                 Reading PGP.         (line   6)
* Gnus:                                  HTML.                (line   6)
* Gnus <1>:                              Reading PGP.         (line   6)
* Gnus <2>:                              Procmail.            (line   6)
* gnus-w3m:                              HTML.                (line  29)
* gnuserv:                               Incorporating Mail.  (line  71)
* GPG:                                   Reading PGP.         (line   6)
* grep:                                  Searching.           (line 191)
* grep <1>:                              Searching.           (line 336)
* ham:                                   Junk.                (line  11)
* header field, Bcc:                     Editing Message.     (line   6)
* header field, Cc:                      Editing Message.     (line   6)
* header field, Content-Disposition:     Viewing Attachments. (line 104)
* header field, Content-Transfer-Encoding: Junk.              (line 265)
* header field, Content-Type:            Junk.                (line 265)
* header field, Dcc:                     Editing Message.     (line   6)
* header field, Face:                    Viewing.             (line  43)
* header field, Face <1>:                Picture.             (line  12)
* header field, Fcc:                     Sending PGP.         (line  42)
* header field, Fcc <1>:                 Identities.          (line  92)
* header field, From:                    Editing Message.     (line   6)
* header field, From <1>:                Identities.          (line  45)
* header field, Mail-Followup-To:        Editing Message.     (line   6)
* header field, Mail-Followup-To <1>:    Identities.          (line  96)
* header field, Mail-Reply-To:           Editing Message.     (line   6)
* header field, Organization:            Identities.          (line  50)
* header field, Reply-To:                Editing Message.     (line   6)
* header field, Subject:                 Editing Message.     (line   6)
* header field, Subject <1>:             Junk.                (line 265)
* header field, To:                      Editing Message.     (line   6)
* header field, X-Bogosity:              Junk.                (line 200)
* header field, X-Face:                  Viewing.             (line  43)
* header field, X-Face <1>:              Picture.             (line  12)
* header field, X-Image-URL:             Viewing.             (line  43)
* header field, X-Image-URL <1>:         Picture.             (line  12)
* header field, X-Mailer:                Composing.           (line  29)
* header field, X-MHE-Checksum:          Searching.           (line 177)
* header field, X-Spam-Level:            Junk.                (line 107)
* header field, X-Spam-Status:           Junk.                (line 107)
* header field, X-SpamProbe:             Junk.                (line 238)
* help:                                  Sending Mail Tour.   (line  44)
* help <1>:                              Processing Mail Tour.
                                                              (line  75)
* highlighting:                          Conventions.         (line  65)
* highlighting citations:                Viewing.             (line 103)
* highlighting email addresses:          Viewing.             (line 111)
* highlighting URLs:                     Viewing.             (line 111)
* history:                               Getting Started.     (line   6)
* history of MH-E:                       History.             (line   6)
* hooks:                                 Conventions.         (line  70)
* HTML:                                  HTML.                (line   6)
* html2text:                             HTML.                (line  33)
* identities:                            Identities.          (line   6)
* Identity > Customize Identities menu item: Identities.      (line  72)
* Identity > Insert Auto Fields menu item: Identities.        (line  14)
* Identity > Save as Default menu item:  Identities.          (line  72)
* Identity > Set Default for Session menu item: Identities.   (line  72)
* Identity menu:                         Identities.          (line  10)
* Identity menu <1>:                     Identities.          (line  67)
* Identity menu <2>:                     Menu Bar.            (line   6)
* Identity menu <3>:                     Menu Bar.            (line   6)
* ImageMagick:                           Viewing.             (line  59)
* images:                                Adding Attachments.  (line 101)
* inc:                                   Reading Mail Tour.   (line   6)
* inc <1>:                               Incorporating Mail.  (line  40)
* inc <2>:                               Scan Line Formats.   (line 105)
* incorporating:                         Incorporating Mail.  (line   6)
* incorporating <1>:                     Incorporating Mail.  (line  40)
* index:                                 Searching.           (line 229)
* index++:                               Searching.           (line 229)
* info:                                  Preface.             (line  28)
* info <1>:                              Using This Manual.   (line   9)
* info <2>:                              Using This Manual.   (line  35)
* inline attachments:                    Viewing Attachments. (line  88)
* inline images:                         Viewing Attachments. (line 104)
* inserting messages:                    Inserting Letter.    (line   6)
* inserting messages <1>:                Inserting Messages.  (line   6)
* install-mh:                            Getting Started.     (line  30)
* interrupting:                          Conventions.         (line 109)
* introduction:                          Tour Through MH-E.   (line   6)
* italics, showing:                      Viewing.             (line 118)
* Jim Larus:                             History.             (line   6)
* Jim Larus <1>:                         From Jim Larus.      (line   6)
* junk mail:                             Folders.             (line 210)
* junk mail <1>:                         Junk.                (line   6)
* key names:                             Conventions.         (line  17)
* key server:                            Reading PGP.         (line  17)
* keychain:                              Reading PGP.         (line  17)
* killing draft:                         Killing Draft.       (line   6)
* Larus, Jim:                            History.             (line   6)
* Larus, Jim <1>:                        From Jim Larus.      (line   6)
* Letter > Check Recipient menu item:    Editing Drafts.      (line 113)
* Letter > Compose Compressed tar (MH)... menu item: Editing Drafts.
                                                              (line  84)
* Letter > Compose Forward... menu item: Editing Drafts.      (line  65)
* Letter > Compose Get File (MH)... menu item: Editing Drafts.
                                                              (line  68)
* Letter > Compose Insertion... menu item: Editing Drafts.    (line  72)
* Letter > Insert a Message... menu item: Editing Drafts.     (line  61)
* Letter > Insert Signature menu item:   Editing Drafts.      (line 108)
* Letter > Kill This Draft menu item:    Editing Drafts.      (line 106)
* Letter > Pull in All Compositions (MH) menu item: Editing Drafts.
                                                              (line  29)
* Letter > Pull in All Compositions (MML) menu item: Editing Drafts.
                                                              (line  76)
* Letter > Revert to Non-MIME Edit (MH) menu item: Editing Drafts.
                                                              (line  88)
* Letter > Send This Draft menu item:    Editing Drafts.      (line  24)
* Letter > Split Current Line menu item: Editing Drafts.      (line 104)
* Letter > Yank Current Message menu item: Editing Drafts.    (line 116)
* Letter menu:                           Editing Drafts.      (line   6)
* Letter menu <1>:                       Menu Bar.            (line   6)
* Letter menu <2>:                       Menu Bar.            (line   6)
* limits:                                Limits.              (line   6)
* links:                                 HTML.                (line  37)
* links, following:                      Viewing.             (line 111)
* lpr:                                   Printing.            (line  35)
* lynx:                                  HTML.                (line  45)
* Mail mode:                             Composing.           (line  34)
* Mail-Followup-To header field:         Editing Message.     (line   6)
* Mail-Followup-To header field <1>:     Identities.          (line  96)
* Mail-Reply-To header field:            Editing Message.     (line   6)
* Mailer-Daemon:                         Editing Again.       (line  17)
* mailing lists:                         Mailing Lists.       (line   6)
* mailing lists, reading:                Procmail.            (line   6)
* mairix:                                Searching.           (line 191)
* mairix <1>:                            Searching.           (line 280)
* manual:                                Getting MH-E.        (line  29)
* mark:                                  Conventions.         (line  80)
* mark <1>:                              Sequences.           (line 115)
* Marshall Rose:                         Junk.                (line   6)
* mbox-style folder:                     Leaving MH-E.        (line  16)
* media types:                           Adding Attachments.  (line  27)
* menu bar:                              Menu Bar.            (line   6)
* menu item, Folder > Incorporate New Mail: Incorporating Mail.
                                                              (line  10)
* menu item, Folder > List Folders:      Folders.             (line  24)
* menu item, Folder > Pack Folder:       Folders.             (line  28)
* menu item, Folder > Quit MH-E:         Folders.             (line  45)
* menu item, Folder > Rescan Folder:     Folders.             (line  32)
* menu item, Folder > Search...:         Folders.             (line  34)
* menu item, Folder > Sort Folder:       Folders.             (line  36)
* menu item, Folder > Toggle Show/Folder: Folders.            (line  47)
* menu item, Folder > View New Messages: Folders.             (line  26)
* menu item, Folder > Visit a Folder...: Folders.             (line  41)
* menu item, Identity > Customize Identities: Identities.     (line  72)
* menu item, Identity > Insert Auto Fields: Identities.       (line  14)
* menu item, Identity > Save as Default: Identities.          (line  72)
* menu item, Identity > Set Default for Session: Identities.  (line  72)
* menu item, Letter > Check Recipient:   Editing Drafts.      (line 113)
* menu item, Letter > Compose Compressed tar (MH)...: Editing Drafts.
                                                              (line  84)
* menu item, Letter > Compose Forward...: Editing Drafts.     (line  65)
* menu item, Letter > Compose Get File (MH)...: Editing Drafts.
                                                              (line  68)
* menu item, Letter > Compose Insertion...: Editing Drafts.   (line  72)
* menu item, Letter > Insert a Message...: Editing Drafts.    (line  61)
* menu item, Letter > Insert Signature:  Editing Drafts.      (line 108)
* menu item, Letter > Kill This Draft:   Editing Drafts.      (line 106)
* menu item, Letter > Pull in All Compositions (MH): Editing Drafts.
                                                              (line  29)
* menu item, Letter > Pull in All Compositions (MML): Editing Drafts.
                                                              (line  76)
* menu item, Letter > Revert to Non-MIME Edit (MH): Editing Drafts.
                                                              (line  88)
* menu item, Letter > Send This Draft:   Editing Drafts.      (line  24)
* menu item, Letter > Split Current Line: Editing Drafts.     (line 104)
* menu item, Letter > Yank Current Message: Editing Drafts.   (line 116)
* menu item, Message > Burst Digest Message: Reading Mail.    (line  54)
* menu item, Message > Compose a New Message: Sending Mail.   (line  27)
* menu item, Message > Copy Message to Folder...: Folders.    (line  13)
* menu item, Message > Delete Message:   Reading Mail.        (line  45)
* menu item, Message > Edit Message Again: Sending Mail.      (line  19)
* menu item, Message > Execute Delete/Refile: Folders.        (line  52)
* menu item, Message > Forward Message...: Sending Mail.      (line  23)
* menu item, Message > Go to First Message: Reading Mail.     (line  83)
* menu item, Message > Go to Last Message: Reading Mail.      (line  85)
* menu item, Message > Go to Message by Number...: Reading Mail.
                                                              (line  56)
* menu item, Message > Modify Message:   Reading Mail.        (line  81)
* menu item, Message > Next Message:     Reading Mail.        (line  91)
* menu item, Message > Pipe Message to Command...: Reading Mail.
                                                              (line  40)
* menu item, Message > Previous Message: Reading Mail.        (line  93)
* menu item, Message > Print Message:    Reading Mail.        (line 106)
* menu item, Message > Re-edit a Bounced Message: Sending Mail.
                                                              (line  20)
* menu item, Message > Redistribute Message...: Sending Mail. (line  29)
* menu item, Message > Refile Message:   Folders.             (line  43)
* menu item, Message > Reply to Message...: Sending Mail.     (line  25)
* menu item, Message > Show Message:     Reading Mail.        (line  24)
* menu item, Message > Show Message with Header: Reading Mail.
                                                              (line  26)
* menu item, Message > Show Message with Preferred Alternative: Reading Mail.
                                                              (line  28)
* menu item, Message > Undo Delete/Refile: Folders.           (line  50)
* menu item, Message > Unpack Uuencoded Message...: Reading Mail.
                                                              (line 113)
* menu item, Message > Write Message to File...: Reading Mail.
                                                              (line  38)
* menu item, Search > Perform Search:    Searching.           (line  13)
* menu item, Search > Search with pick:  Searching.           (line  15)
* menu item, Sequence > Add Message to Sequence...: Sequences.
                                                              (line  27)
* menu item, Sequence > Delete Message from Sequence...: Sequences.
                                                              (line  19)
* menu item, Sequence > Delete Sequence...: Sequences.        (line  21)
* menu item, Sequence > List Sequences for Message: Sequences.
                                                              (line  29)
* menu item, Sequence > List Sequences in Folder...: Sequences.
                                                              (line  23)
* menu item, Sequence > Narrow to Sequence...: Sequences.     (line  25)
* menu item, Sequence > Narrow to Subject Sequence: Limits.   (line  22)
* menu item, Sequence > Narrow to Tick Sequence: Limits.      (line  13)
* menu item, Sequence > Narrow to Tick Sequence <1>: Sequences.
                                                              (line  17)
* menu item, Sequence > Toggle Tick Mark: Sequences.          (line  13)
* menu item, Sequence > Widen from Sequence: Limits.          (line  27)
* menu item, Sequence > Widen from Sequence <1>: Sequences.   (line  32)
* menu, Folder:                          Incorporating Mail.  (line   6)
* menu, Folder <1>:                      Folders.             (line   6)
* menu, Folder <2>:                      Menu Bar.            (line   6)
* menu, Folder <3>:                      Menu Bar.            (line   6)
* menu, Identity:                        Identities.          (line  10)
* menu, Identity <1>:                    Identities.          (line  67)
* menu, Identity <2>:                    Menu Bar.            (line   6)
* menu, Identity <3>:                    Menu Bar.            (line   6)
* menu, Letter:                          Editing Drafts.      (line   6)
* menu, Letter <1>:                      Menu Bar.            (line   6)
* menu, Letter <2>:                      Menu Bar.            (line   6)
* menu, Message:                         Reading Mail.        (line  16)
* menu, Message <1>:                     Folders.             (line   6)
* menu, Message <2>:                     Sending Mail.        (line  16)
* menu, Message <3>:                     Menu Bar.            (line   6)
* menu, Message <4>:                     Menu Bar.            (line   6)
* menu, Search:                          Menu Bar.            (line   6)
* menu, Search <1>:                      Menu Bar.            (line   6)
* menu, Search <2>:                      Searching.           (line   6)
* menu, Sequence:                        Menu Bar.            (line   6)
* menu, Sequence <1>:                    Menu Bar.            (line   6)
* menu, Sequence <2>:                    Sequences.           (line   6)
* Message > Burst Digest Message menu item: Reading Mail.     (line  54)
* Message > Compose a New Message menu item: Sending Mail.    (line  27)
* Message > Copy Message to Folder... menu item: Folders.     (line  13)
* Message > Delete Message menu item:    Reading Mail.        (line  45)
* Message > Edit Message Again menu item: Sending Mail.       (line  19)
* Message > Execute Delete/Refile menu item: Folders.         (line  52)
* Message > Forward Message... menu item: Sending Mail.       (line  23)
* Message > Go to First Message menu item: Reading Mail.      (line  83)
* Message > Go to Last Message menu item: Reading Mail.       (line  85)
* Message > Go to Message by Number... menu item: Reading Mail.
                                                              (line  56)
* Message > Modify Message menu item:    Reading Mail.        (line  81)
* Message > Next Message menu item:      Reading Mail.        (line  91)
* Message > Pipe Message to Command... menu item: Reading Mail.
                                                              (line  40)
* Message > Previous Message menu item:  Reading Mail.        (line  93)
* Message > Print Message menu item:     Reading Mail.        (line 106)
* Message > Re-edit a Bounced Message menu item: Sending Mail.
                                                              (line  20)
* Message > Redistribute Message... menu item: Sending Mail.  (line  29)
* Message > Refile Message menu item:    Folders.             (line  43)
* Message > Reply to Message... menu item: Sending Mail.      (line  25)
* Message > Show Message menu item:      Reading Mail.        (line  24)
* Message > Show Message with Header menu item: Reading Mail. (line  26)
* Message > Show Message with Preferred Alternative menu item: Reading Mail.
                                                              (line  28)
* Message > Undo Delete/Refile menu item: Folders.            (line  50)
* Message > Unpack Uuencoded Message... menu item: Reading Mail.
                                                              (line 113)
* Message > Write Message to File... menu item: Reading Mail. (line  38)
* message abbreviations:                 Ranges.              (line   6)
* Message menu:                          Reading Mail.        (line  16)
* Message menu <1>:                      Folders.             (line   6)
* Message menu <2>:                      Sending Mail.        (line  16)
* Message menu <3>:                      Menu Bar.            (line   6)
* Message menu <4>:                      Menu Bar.            (line   6)
* message numbers:                       Scan Line Formats.   (line  32)
* message ranges:                        Ranges.              (line   6)
* MH & nmh - Email for Users & Programmers: Preface.          (line  28)
* MH book:                               Preface.             (line  28)
* MH book <1>:                           Getting Started.     (line  30)
* MH commands:                           Conventions.         (line  10)
* MH commands, ali:                      Aliases.             (line 106)
* MH commands, burst:                    Digests.             (line  13)
* MH commands, dist:                     Redistributing.      (line   6)
* MH commands, flists:                   Speedbar.            (line  37)
* MH commands, folder:                   Folders.             (line 163)
* MH commands, forw:                     Forwarding.          (line   6)
* MH commands, inc:                      Reading Mail Tour.   (line   6)
* MH commands, inc <1>:                  Incorporating Mail.  (line  40)
* MH commands, inc <2>:                  Scan Line Formats.   (line 105)
* MH commands, install-mh:               Getting Started.     (line  30)
* MH commands, mark:                     Sequences.           (line 115)
* MH commands, mhbuild:                  Adding Attachments.  (line   6)
* MH commands, mhbuild <1>:              Adding Attachments.  (line 205)
* MH commands, mhl:                      Viewing.             (line  87)
* MH commands, mhl <1>:                  Printing.            (line  35)
* MH commands, mhl <2>:                  Replying.            (line   6)
* MH commands, mhn:                      Viewing Attachments. (line  72)
* MH commands, mhn <1>:                  Adding Attachments.  (line   6)
* MH commands, mhn <2>:                  Adding Attachments.  (line 205)
* MH commands, mhparam:                  Getting Started.     (line  44)
* MH commands, mhshow:                   Viewing Attachments. (line   6)
* MH commands, mhstore:                  Viewing Attachments. (line  72)
* MH commands, packf:                    Leaving MH-E.        (line  16)
* MH commands, pick:                     Searching.           (line  84)
* MH commands, pick <1>:                 Searching.           (line 116)
* MH commands, pick <2>:                 Searching.           (line 327)
* MH commands, pick <3>:                 Limits.              (line  33)
* MH commands, pick <4>:                 Sequences.           (line  59)
* MH commands, rcvstore:                 Procmail.            (line  34)
* MH commands, refile:                   Processing Mail Tour.
                                                              (line  51)
* MH commands, refile <1>:               Folders.             (line 163)
* MH commands, repl:                     Composing.           (line  34)
* MH commands, repl <1>:                 Replying.            (line  21)
* MH commands, scan:                     Reading Mail Tour.   (line   6)
* MH commands, scan <1>:                 Reading Mail.        (line  16)
* MH commands, scan <2>:                 Scan Line Formats.   (line  86)
* MH commands, scan <3>:                 Scan Line Formats.   (line 105)
* MH commands, send:                     Redistributing.      (line  16)
* MH commands, send <1>:                 Sending Message.     (line  16)
* MH commands, show:                     Viewing Attachments. (line   6)
* MH commands, slocal:                   Procmail.            (line   6)
* MH commands, sortm:                    Folders.             (line 301)
* MH commands, whom:                     Checking Recipients. (line   6)
* mh customization group:                Options.             (line  33)
* MH FAQ:                                MH FAQ and Support.  (line   6)
* MH profile:                            Getting Started.     (line  38)
* MH profile component:                  Getting Started.     (line  38)
* MH profile component, Aliasfile:       Aliases.             (line 106)
* MH profile component, Draft-Folder:    Getting Started.     (line  67)
* MH profile component, forw:            Forwarding.          (line  14)
* MH profile component, Path:            Getting Started.     (line  38)
* MH profile component, Path <1>:        Getting Started.     (line  67)
* MH profile component, Previous-Sequence: Getting Started.   (line  67)
* MH profile component, Previous-Sequence <1>: Sequences.     (line  90)
* MH profile component, Previous-Sequence <2>: Junk.          (line  85)
* MH profile component, repl:            Replying.            (line  30)
* MH profile component, sortm:           Folders.             (line 301)
* MH profile component, Unseen-Sequence: Getting Started.     (line  67)
* MH profile component, Unseen-Sequence <1>: Sequences.       (line 102)
* MH profile component, Unseen-Sequence <2>: Procmail.        (line  43)
* mh-alias customization group:          Aliases.             (line  25)
* MH-E version:                          Miscellaneous.       (line  12)
* MH-E, obtaining:                       Getting MH-E.        (line   6)
* MH-E, versions:                        Getting Started.     (line   6)
* MH-E, versions <1>:                    History.             (line   6)
* MH-E-NEWS:                             Getting MH-E.        (line  22)
* mh-folder customization group:         Folders.             (line  57)
* MH-Folder mode:                        Reading Mail Tour.   (line   6)
* MH-Folder mode <1>:                    Processing Mail Tour.
                                                              (line  63)
* MH-Folder mode <2>:                    Reading Mail.        (line   6)
* MH-Folder mode <3>:                    Navigating.          (line  18)
* MH-Folder mode <4>:                    Miscellaneous Commands and Options.
                                                              (line  20)
* MH-Folder mode <5>:                    Folders.             (line 210)
* MH-Folder mode <6>:                    Folders.             (line 217)
* MH-Folder mode <7>:                    Composing.           (line   6)
* MH-Folder mode <8>:                    Menu Bar.            (line   6)
* MH-Folder mode <9>:                    Sequences.           (line  73)
* MH-Folder Show mode:                   Digests.             (line  13)
* MH-Folder Show mode <1>:               Folders.             (line 210)
* mh-folder-selection customization group: Folder Selection.  (line  12)
* mh-identity customization group:       Identities.          (line  19)
* mh-inc customization group:            Incorporating Mail.  (line  13)
* mh-junk customization group:           Junk.                (line  27)
* mh-letter customization group:         Editing Drafts.      (line 124)
* MH-Letter mode:                        Sending Mail Tour.   (line   6)
* MH-Letter mode <1>:                    Composing.           (line  16)
* MH-Letter mode <2>:                    Composing.           (line  34)
* MH-Letter mode <3>:                    Replying.            (line  30)
* MH-Letter mode <4>:                    Editing Drafts.      (line   6)
* MH-Letter mode <5>:                    Aliases.             (line  10)
* MH-Letter mode <6>:                    Menu Bar.            (line   6)
* mh-range customization group:          Ranges.              (line  39)
* mh-scan-line-formats customization group: Scan Line Formats.
                                                              (line  10)
* mh-search customization group:         Searching.           (line  62)
* MH-Search mode:                        Menu Bar.            (line   6)
* MH-Search mode <1>:                    Searching.           (line  94)
* mh-sending-mail customization group:   Sending Mail.        (line  37)
* mh-sequences customization group:      Sequences.           (line  38)
* mh-sequences customization group <1>:  Junk.                (line  37)
* mh-show customization group:           Reading Mail.        (line 127)
* MH-Show mode:                          Reading Mail.        (line   6)
* MH-Show mode <1>:                      Viewing.             (line 146)
* MH-Show mode <2>:                      Folders.             (line 217)
* MH-Show mode <3>:                      Replying.            (line  30)
* mh-speedbar customization group:       Speedbar.            (line  37)
* mh-thread customization group:         Threading.           (line  35)
* mh-tool-bar customization group:       Tool Bar.            (line   9)
* mhbuild:                               Adding Attachments.  (line   6)
* mhbuild <1>:                           Adding Attachments.  (line 205)
* mhl:                                   Viewing.             (line  87)
* mhl <1>:                               Printing.            (line  35)
* mhl <2>:                               Replying.            (line   6)
* mhl.reply:                             Replying.            (line   6)
* mhn:                                   Viewing Attachments. (line  72)
* mhn <1>:                               Adding Attachments.  (line   6)
* mhn <2>:                               Adding Attachments.  (line 205)
* mhparam:                               Getting Started.     (line  44)
* mhshow:                                Viewing Attachments. (line   6)
* mhstore:                               Viewing Attachments. (line  72)
* MIME:                                  Viewing Attachments. (line   6)
* MIME <1>:                              Adding Attachments.  (line   6)
* MIME Meta Language (MML):              Adding Attachments.  (line  21)
* MIME, content description:             Adding Attachments.  (line  45)
* MIME, ftp:                             Adding Attachments.  (line 120)
* MIME, ftp <1>:                         Adding Attachments.  (line 128)
* MIME, images:                          Adding Attachments.  (line 101)
* MIME, media types:                     Adding Attachments.  (line  27)
* MIME, sound:                           Adding Attachments.  (line 101)
* MIME, tar:                             Adding Attachments.  (line 128)
* MIME, video:                           Adding Attachments.  (line 101)
* minibuffer:                            Conventions.         (line  88)
* mm-decode package:                     Viewing Attachments. (line  11)
* MML:                                   Adding Attachments.  (line  21)
* mode:                                  Sending Mail Tour.   (line   6)
* modes, Mail:                           Composing.           (line  34)
* modes, MH-Folder:                      Reading Mail Tour.   (line   6)
* modes, MH-Folder <1>:                  Processing Mail Tour.
                                                              (line  63)
* modes, MH-Folder <2>:                  Reading Mail.        (line   6)
* modes, MH-Folder <3>:                  Navigating.          (line  18)
* modes, MH-Folder <4>:                  Miscellaneous Commands and Options.
                                                              (line  20)
* modes, MH-Folder <5>:                  Folders.             (line 210)
* modes, MH-Folder <6>:                  Folders.             (line 217)
* modes, MH-Folder <7>:                  Composing.           (line   6)
* modes, MH-Folder <8>:                  Menu Bar.            (line   6)
* modes, MH-Folder <9>:                  Sequences.           (line  73)
* modes, MH-Folder Show:                 Digests.             (line  13)
* modes, MH-Folder Show <1>:             Folders.             (line 210)
* modes, MH-Letter:                      Sending Mail Tour.   (line   6)
* modes, MH-Letter <1>:                  Composing.           (line  16)
* modes, MH-Letter <2>:                  Composing.           (line  34)
* modes, MH-Letter <3>:                  Replying.            (line  30)
* modes, MH-Letter <4>:                  Editing Drafts.      (line   6)
* modes, MH-Letter <5>:                  Aliases.             (line  10)
* modes, MH-Letter <6>:                  Menu Bar.            (line   6)
* modes, MH-Search:                      Menu Bar.            (line   6)
* modes, MH-Search <1>:                  Searching.           (line  94)
* modes, MH-Show:                        Reading Mail.        (line   6)
* modes, MH-Show <1>:                    Viewing.             (line 146)
* modes, MH-Show <2>:                    Folders.             (line 217)
* modes, MH-Show <3>:                    Replying.            (line  30)
* moving between messages:               Navigating.          (line   6)
* moving between messages <1>:           Folders.             (line 217)
* multimedia mail:                       Viewing Attachments. (line   6)
* multimedia mail <1>:                   Adding Attachments.  (line   6)
* multiple personalities:                Identities.          (line   6)
* namazu:                                Searching.           (line 191)
* namazu <1>:                            Searching.           (line 303)
* navigation:                            Navigating.          (line   6)
* new mail:                              Incorporating Mail.  (line  34)
* news:                                  Getting MH-E.        (line  22)
* nil:                                   Options.             (line  15)
* NIS, obtaining local aliases from:     Aliases.             (line 142)
* nmh:                                   Getting Started.     (line  23)
* normal hooks:                          Conventions.         (line  70)
* notations, scan line:                  Scan Line Formats.   (line  76)
* notification of new mail:              Incorporating Mail.  (line  34)
* obtaining MH-E:                        Getting MH-E.        (line   6)
* off, option:                           Options.             (line  15)
* on, option:                            Options.             (line  15)
* online help:                           Using This Manual.   (line  35)
* OpenPGP:                               Reading PGP.         (line   6)
* option, turning on and off:            Options.             (line  15)
* options:                               Conventions.         (line  60)
* Organization header field:             Identities.          (line  50)
* packf:                                 Leaving MH-E.        (line  16)
* paragraphs, filling:                   Editing Message.     (line  61)
* Path MH profile component:             Getting Started.     (line  38)
* Path MH profile component <1>:         Getting Started.     (line  67)
* PGG:                                   Reading PGP.         (line  75)
* PGG <1>:                               Sending PGP.         (line  39)
* pgg customization group:               Reading PGP.         (line  75)
* pgg customization group <1>:           Sending PGP.         (line  39)
* PGP:                                   Reading PGP.         (line   6)
* pick:                                  Searching.           (line  84)
* pick <1>:                              Searching.           (line 116)
* pick <2>:                              Searching.           (line 191)
* pick <3>:                              Searching.           (line 327)
* pick <4>:                              Limits.              (line  33)
* pick <5>:                              Sequences.           (line  59)
* pipes:                                 Files and Pipes.     (line   6)
* point:                                 Conventions.         (line  80)
* preface:                               Preface.             (line   6)
* prefix argument:                       Conventions.         (line  39)
* prefix characters:                     Processing Mail Tour.
                                                              (line  75)
* Previous-Sequence MH profile component: Getting Started.    (line  67)
* Previous-Sequence MH profile component <1>: Sequences.      (line  90)
* Previous-Sequence MH profile component <2>: Junk.           (line  85)
* printing:                              Printing.            (line   6)
* processing mail:                       Processing Mail Tour.
                                                              (line   6)
* procmail:                              Incorporating Mail.  (line  56)
* procmail <1>:                          Folders.             (line 240)
* procmail <2>:                          Searching.           (line 177)
* procmail <3>:                          Procmail.            (line   6)
* ps-print package:                      Printing.            (line  31)
* quitting:                              Conventions.         (line 109)
* quitting <1>:                          Leaving MH-E.        (line   6)
* quitting <2>:                          Folders.             (line 307)
* ranges:                                Ranges.              (line   6)
* rcvstore:                              Procmail.            (line  34)
* re-editing drafts:                     Editing Again.       (line   6)
* reading mail:                          Reading Mail Tour.   (line   6)
* reading mail <1>:                      Reading Mail.        (line   6)
* reading mail <2>:                      Miscellaneous Commands and Options.
                                                              (line  35)
* README:                                Getting MH-E.        (line  22)
* recipients, checking:                  Checking Recipients. (line   6)
* redistributing:                        Redistributing.      (line   6)
* refile:                                Processing Mail Tour.
                                                              (line  51)
* refile <1>:                            Folders.             (line 163)
* region:                                Conventions.         (line  80)
* regular expressions, mh-alias-apropos: Aliases.             (line 212)
* regular expressions, mh-auto-fields-list: Identities.       (line  81)
* regular expressions, mh-invisible-header-fields: Viewing.   (line  30)
* regular expressions, scan line formats: Scan Line Formats.  (line  93)
* Reid, Brian:                           History.             (line   6)
* Reid, Brian <1>:                       From Brian Reid.     (line   6)
* release notes:                         Getting MH-E.        (line  11)
* renaming folders:                      Folders.             (line 340)
* repl:                                  Composing.           (line  34)
* repl <1>:                              Replying.            (line  21)
* repl MH profile component:             Replying.            (line  30)
* Reply-To header field:                 Editing Message.     (line   6)
* replying:                              Replying.            (line   6)
* replying to messages:                  Inserting Letter.    (line   6)
* RFC 2047, decoding:                    Scan Line Formats.   (line  72)
* RFC 3156:                              Reading PGP.         (line   6)
* RFC 3156 <1>:                          Sending PGP.         (line   6)
* root, in threads:                      Threading.           (line  12)
* sa-learn:                              Junk.                (line 147)
* saving attachments:                    Viewing Attachments. (line  63)
* scan:                                  Reading Mail Tour.   (line   6)
* scan <1>:                              Reading Mail.        (line  16)
* scan <2>:                              Scan Line Formats.   (line  86)
* scan <3>:                              Scan Line Formats.   (line 105)
* scan line formats:                     Scan Line Formats.   (line   6)
* scan line notations:                   Scan Line Formats.   (line  76)
* scan lines:                            Reading Mail.        (line  16)
* Search > Perform Search menu item:     Searching.           (line  13)
* Search > Search with pick menu item:   Searching.           (line  15)
* Search menu:                           Menu Bar.            (line   6)
* Search menu <1>:                       Menu Bar.            (line   6)
* Search menu <2>:                       Searching.           (line   6)
* searching:                             Searching.           (line   6)
* security:                              Reading PGP.         (line   6)
* send:                                  Redistributing.      (line  16)
* send <1>:                              Sending Message.     (line  16)
* sending mail:                          Sending Mail Tour.   (line   6)
* sending mail <1>:                      Sending Mail.        (line   6)
* sending mail <2>:                      Composing.           (line   6)
* sending mail <3>:                      Sending Message.     (line   6)
* sending mail <4>:                      Sending Message.     (line  12)
* Sequence > Add Message to Sequence... menu item: Sequences. (line  27)
* Sequence > Delete Message from Sequence... menu item: Sequences.
                                                              (line  19)
* Sequence > Delete Sequence... menu item: Sequences.         (line  21)
* Sequence > List Sequences for Message menu item: Sequences. (line  29)
* Sequence > List Sequences in Folder... menu item: Sequences.
                                                              (line  23)
* Sequence > Narrow to Sequence... menu item: Sequences.      (line  25)
* Sequence > Narrow to Subject Sequence menu item: Limits.    (line  22)
* Sequence > Narrow to Tick Sequence menu item: Limits.       (line  13)
* Sequence > Narrow to Tick Sequence menu item <1>: Sequences.
                                                              (line  17)
* Sequence > Toggle Tick Mark menu item: Sequences.           (line  13)
* Sequence > Widen from Sequence menu item: Limits.           (line  27)
* Sequence > Widen from Sequence menu item <1>: Sequences.    (line  32)
* Sequence menu:                         Menu Bar.            (line   6)
* Sequence menu <1>:                     Menu Bar.            (line   6)
* Sequence menu <2>:                     Sequences.           (line   6)
* sequence, cur:                         Sequences.           (line  90)
* sequence, cur <1>:                     Sequences.           (line 102)
* sequence, cur <2>:                     Junk.                (line  85)
* sequence, Previous-Sequence:           Sequences.           (line  90)
* sequence, Previous-Sequence <1>:       Junk.                (line  85)
* sequence, tick:                        Folders.             (line 248)
* sequence, tick <1>:                    Limits.              (line  39)
* sequence, tick <2>:                    Sequences.           (line  64)
* sequence, tick <3>:                    Sequences.           (line 102)
* sequence, unseen:                      Folders.             (line 240)
* sequence, Unseen-Sequence:             Sequences.           (line 102)
* sequences:                             Sequences.           (line   6)
* setting options:                       Options.             (line   6)
* shar:                                  Files and Pipes.     (line  21)
* shell commands:                        Conventions.         (line  10)
* show:                                  Viewing Attachments. (line   6)
* shr:                                   HTML.                (line  54)
* siblings, in threads:                  Threading.           (line  12)
* signature:                             Signature.           (line   6)
* signature <1>:                         Identities.          (line  59)
* signature separator:                   Viewing.             (line 132)
* signature separator <1>:               Signature.           (line  23)
* signed messages:                       Reading PGP.         (line   6)
* signed messages <1>:                   Reading PGP.         (line  17)
* signing messages:                      Sending PGP.         (line   6)
* slocal:                                Procmail.            (line   6)
* smileys:                               Viewing.             (line 118)
* sortm:                                 Folders.             (line 301)
* sortm MH profile component:            Folders.             (line 301)
* sound:                                 Adding Attachments.  (line 101)
* SourceForge:                           Bug Reports.         (line   6)
* SourceForge <1>:                       Mailing Lists.       (line   6)
* SourceForge <2>:                       History.             (line   6)
* spam:                                  Folders.             (line 210)
* spam <1>:                              Junk.                (line   6)
* spam filters, bogofilter:              Junk.                (line  60)
* spam filters, bogofilter <1>:          Junk.                (line 181)
* spam filters, SpamAssassin:            Junk.                (line  60)
* spam filters, SpamAssassin <1>:        Junk.                (line 101)
* spam filters, SpamProbe:               Junk.                (line  60)
* spam filters, SpamProbe <1>:           Junk.                (line 232)
* SpamAssassin:                          Junk.                (line  60)
* SpamAssassin <1>:                      Junk.                (line 101)
* spamc:                                 Junk.                (line 107)
* SpamProbe:                             Junk.                (line  60)
* SpamProbe <1>:                         Junk.                (line 232)
* speedbar:                              Speedbar.            (line   6)
* spell check:                           Editing Message.     (line  32)
* spell check <1>:                       Sending Message.     (line  12)
* starting from command line:            Sending Mail.        (line   9)
* Stephen Gildea:                        History.             (line   6)
* Stephen Gildea <1>:                    From Stephen Gildea. (line   6)
* Subject header field:                  Editing Message.     (line   6)
* Subject header field <1>:              Junk.                (line 265)
* supercite package:                     Inserting Letter.    (line  36)
* support:                               MH FAQ and Support.  (line  12)
* swish++:                               Searching.           (line 191)
* swish++ <1>:                           Searching.           (line 204)
* swish-e:                               Searching.           (line 191)
* swish-e <1>:                           Searching.           (line 235)
* swish-e <2>:                           Searching.           (line 272)
* t:                                     Options.             (line  15)
* tar:                                   Adding Attachments.  (line 128)
* terms, Emacs:                          Conventions.         (line   6)
* threading:                             Threading.           (line   6)
* tick sequence:                         Folders.             (line 248)
* tick sequence <1>:                     Limits.              (line  39)
* tick sequence <2>:                     Sequences.           (line  64)
* tick sequence <3>:                     Sequences.           (line 102)
* ticked messages, viewing:              Folders.             (line 248)
* ticked messages, viewing <1>:          Limits.              (line  39)
* ticking messages:                      Sequences.           (line  64)
* To header field:                       Editing Message.     (line   6)
* tool bar:                              Tool Bar.            (line   6)
* tour:                                  Tour Through MH-E.   (line   6)
* trivial-cite package:                  Inserting Letter.    (line  74)
* tutorial:                              Tour Through MH-E.   (line   6)
* typesetting:                           Viewing.             (line 118)
* uncompface:                            Viewing.             (line  55)
* underline, showing:                    Viewing.             (line 118)
* undo effects of mh-mh-to-mime:         Adding Attachments.  (line 205)
* undo effects of mh-mml-to-mime:        Adding Attachments.  (line 203)
* undoing refiles and deletes:           Folders.             (line 177)
* Unix commands:                         Conventions.         (line  10)
* Unix commands, compface:               Picture.             (line  17)
* Unix commands, convert:                Viewing.             (line  59)
* Unix commands, Emacs:                  Preface.             (line   6)
* Unix commands, Emacs <1>:              Conventions.         (line   6)
* Unix commands, emacsclient:            Incorporating Mail.  (line  71)
* Unix commands, file:                   Adding Attachments.  (line  32)
* Unix commands, ftp:                    Adding Attachments.  (line 120)
* Unix commands, ftp <1>:                Adding Attachments.  (line 128)
* Unix commands, gnuclient:              Incorporating Mail.  (line  71)
* Unix commands, grep:                   Searching.           (line 191)
* Unix commands, grep <1>:               Searching.           (line 336)
* Unix commands, index:                  Searching.           (line 229)
* Unix commands, index++:                Searching.           (line 229)
* Unix commands, lpr:                    Printing.            (line  35)
* Unix commands, mairix:                 Searching.           (line 191)
* Unix commands, mairix <1>:             Searching.           (line 280)
* Unix commands, namazu:                 Searching.           (line 191)
* Unix commands, namazu <1>:             Searching.           (line 303)
* Unix commands, pick:                   Searching.           (line 191)
* Unix commands, procmail:               Incorporating Mail.  (line  56)
* Unix commands, procmail <1>:           Folders.             (line 240)
* Unix commands, procmail <2>:           Searching.           (line 177)
* Unix commands, procmail <3>:           Procmail.            (line   6)
* Unix commands, shar:                   Files and Pipes.     (line  21)
* Unix commands, swish++:                Searching.           (line 191)
* Unix commands, swish++ <1>:            Searching.           (line 204)
* Unix commands, swish-e:                Searching.           (line 191)
* Unix commands, swish-e <1>:            Searching.           (line 235)
* Unix commands, swish-e <2>:            Searching.           (line 272)
* Unix commands, tar:                    Adding Attachments.  (line 128)
* Unix commands, uncompface:             Viewing.             (line  55)
* Unix commands, uuencode:               Files and Pipes.     (line  21)
* Unix commands, wget:                   Viewing.             (line  59)
* Unix commands, xbuffy:                 Incorporating Mail.  (line  71)
* unseen messages, viewing:              Folders.             (line 240)
* unseen sequence:                       Folders.             (line 240)
* Unseen-Sequence MH profile component:  Getting Started.     (line  67)
* Unseen-Sequence MH profile component <1>: Sequences.        (line 102)
* Unseen-Sequence MH profile component <2>: Procmail.         (line  43)
* URLs, highlighting:                    Viewing.             (line 111)
* using folders:                         Folders.             (line   6)
* uuencode:                              Files and Pipes.     (line  21)
* variables:                             Conventions.         (line  57)
* vCard:                                 Viewing.             (line 132)
* vCard <1>:                             Signature.           (line   9)
* version:                               Miscellaneous.       (line  12)
* versions of MH-E:                      Getting Started.     (line   6)
* versions of MH-E <1>:                  History.             (line   6)
* video:                                 Adding Attachments.  (line 101)
* viewing attachments:                   Viewing Attachments. (line  37)
* viruses:                               Junk.                (line  11)
* w3m:                                   HTML.                (line  29)
* w3m <1>:                               HTML.                (line  62)
* w3m <2>:                               HTML.                (line  72)
* w3m-standalone:                        HTML.                (line  72)
* wget:                                  Viewing.             (line  59)
* whom:                                  Checking Recipients. (line   6)
* Wohler, Bill:                          Preface.             (line  39)
* Wohler, Bill <1>:                      History.             (line   6)
* Wohler, Bill <2>:                      From Bill Wohler.    (line   6)
* worms:                                 Junk.                (line  11)
* X-Bogosity header field:               Junk.                (line 200)
* X-Face header field:                   Viewing.             (line  43)
* X-Face header field <1>:               Picture.             (line  12)
* x-face package:                        Viewing.             (line  55)
* X-Image-URL header field:              Viewing.             (line  43)
* X-Image-URL header field <1>:          Picture.             (line  12)
* X-Mailer header field:                 Composing.           (line  29)
* X-MHE-Checksum header field:           Searching.           (line 177)
* X-Spam-Level header field:             Junk.                (line 107)
* X-Spam-Status header field:            Junk.                (line 107)
* X-SpamProbe header field:              Junk.                (line 238)
* xbuffy:                                Incorporating Mail.  (line  71)
* xmh, in MH-E history:                  From Jim Larus.      (line  31)
* yanking messages:                      Inserting Letter.    (line   6)
* ypcat passwd:                          Aliases.             (line 142)



Tag Table:
Node: Top1266
Node: Preface4920
Ref: Preface-Footnote-16970
Node: Conventions7315
Ref: Conventions-Footnote-113055
Node: Getting Started13148
Ref: Getting Started-Footnote-117358
Ref: Getting Started-Footnote-217684
Node: Tour Through MH-E17799
Ref: Tour Through MH-E-Footnote-118543
Node: Sending Mail Tour18785
Ref: Sending Mail Tour-Footnote-120423
Ref: Sending Mail Tour-Footnote-220511
Ref: Sending Mail Tour-Footnote-320697
Node: Reading Mail Tour20852
Ref: Reading Mail Tour-Footnote-122510
Ref: Reading Mail Tour-Footnote-222634
Node: Processing Mail Tour22776
Node: Leaving MH-E26761
Node: More About MH-E27995
Node: Using This Manual29524
Ref: Using This Manual-Footnote-132345
Ref: Using This Manual-Footnote-232433
Node: Options32631
Node: Ranges34648
Node: Folder Selection36479
Node: Incorporating Mail38836
Node: Reading Mail43030
Ref: Reading Mail-Footnote-151801
Node: Viewing52078
Ref: Viewing-Footnote-160649
Ref: Viewing-Footnote-260783
Ref: Viewing-Footnote-361135
Node: Viewing Attachments61371
Ref: Viewing Attachments-Footnote-169429
Ref: Viewing Attachments-Footnote-269553
Ref: Viewing Attachments-Footnote-369669
Ref: Viewing Attachments-Footnote-469883
Node: HTML69953
Node: Digests74560
Ref: Digests-Footnote-176024
Node: Reading PGP76133
Ref: Reading PGP-Footnote-178934
Ref: Reading PGP-Footnote-279184
Node: Printing79363
Ref: Printing-Footnote-182263
Node: Files and Pipes82371
Node: Navigating84399
Node: Miscellaneous Commands and Options87211
Ref: Miscellaneous Commands and Options-Footnote-191199
Ref: Miscellaneous Commands and Options-Footnote-291508
Node: Folders91597
Ref: Folders-Footnote-1107349
Ref: Folders-Footnote-2107568
Ref: Folders-Footnote-3107643
Node: Sending Mail107758
Node: Composing110950
Ref: Composing-Footnote-1114382
Ref: Composing-Footnote-2114636
Node: Replying114816
Ref: Replying-Footnote-1117662
Node: Forwarding117780
Ref: Forwarding-Footnote-1119789
Node: Redistributing119906
Ref: Redistributing-Footnote-1121108
Ref: Redistributing-Footnote-2121231
Node: Editing Again121351
Node: Editing Drafts122482
Node: Editing Message129709
Node: Inserting Letter134743
Ref: Inserting Letter-Footnote-1138829
Ref: Inserting Letter-Footnote-2138952
Ref: Inserting Letter-Footnote-3139133
Node: Inserting Messages139235
Node: Signature140121
Node: Picture141867
Node: Adding Attachments143468
Ref: Adding Attachments-Footnote-1153451
Ref: Adding Attachments-Footnote-2153533
Ref: Adding Attachments-Footnote-3153649
Ref: Adding Attachments-Footnote-4153706
Ref: Adding Attachments-Footnote-5153793
Node: Sending PGP153909
Node: Checking Recipients155916
Ref: Checking Recipients-Footnote-1156345
Node: Sending Message156479
Ref: Sending Message-Footnote-1157442
Node: Killing Draft157562
Node: Aliases157968
Ref: Aliases-Footnote-1167328
Node: Identities167426
Ref: Identities-Footnote-1174770
Node: Speedbar174823
Ref: Speedbar-Footnote-1177389
Node: Menu Bar177521
Node: Tool Bar178513
Node: Searching181178
Node: Threading193430
Ref: Threading-Footnote-1196473
Node: Limits197072
Ref: Limits-Footnote-1199077
Node: Sequences199212
Ref: Sequences-Footnote-1204672
Ref: Sequences-Footnote-2204784
Ref: Sequences-Footnote-3204818
Node: Junk204941
Ref: Junk-Footnote-1215871
Node: Miscellaneous216211
Node: Scan Line Formats218114
Ref: Scan Line Formats-Footnote-1234849
Ref: Scan Line Formats-Footnote-2234991
Node: Procmail235115
Ref: Procmail-Footnote-1240751
Ref: Procmail-Footnote-2240898
Ref: Procmail-Footnote-3241060
Node: Odds and Ends241142
Node: Bug Reports241560
Node: Mailing Lists242047
Node: MH FAQ and Support242565
Node: Getting MH-E243293
Node: History244964
Node: From Brian Reid245640
Ref: From Brian Reid-Footnote-1246796
Node: From Jim Larus247277
Node: From Stephen Gildea249571
Node: From Bill Wohler251746
Node: GFDL253684
Node: GPL279001
Node: Key Index316755
Node: Command Index352248
Node: Option Index381537
Node: Concept Index414458

End Tag Table


Local Variables:
coding: utf-8
End:
