diff --git linux-libre-6.6-gnu/.gitignore linux-libre-6.6.139-gnu/.gitignore
index 0bbae167bf93..d1a8ab3f98aa 100644
--- linux-libre-6.6-gnu/.gitignore
+++ linux-libre-6.6.139-gnu/.gitignore
@@ -135,7 +135,6 @@ GTAGS
 # id-utils files
 ID
 
-*.orig
 *~
 \#*#
 
diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block linux-libre-6.6.139-gnu/Documentation/ABI/stable/sysfs-block
index 1fe9a553c37b..f0025d1c3d5a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block
+++ linux-libre-6.6.139-gnu/Documentation/ABI/stable/sysfs-block
@@ -101,6 +101,16 @@ Description:
 		devices that support receiving integrity metadata.
 
 
+What:		/sys/block/<disk>/partscan
+Date:		May 2024
+Contact:	Christoph Hellwig <hch@lst.de>
+Description:
+		The /sys/block/<disk>/partscan files reports if partition
+		scanning is enabled for the disk.  It returns "1" if partition
+		scanning is enabled, or "0" if not.  The value type is a 32-bit
+		unsigned integer, but only "0" and "1" are valid values.
+
+
 What:		/sys/block/<disk>/<partition>/alignment_offset
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd linux-libre-6.6.139-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
index 825e619250bf..f2ec42949a54 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ linux-libre-6.6.139-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -270,6 +270,12 @@ Description:	Shows the operation capability bits displayed in bitmap format
 		correlates to the operations allowed. It's visible only
 		on platforms that support the capability.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/driver_name
+Date:		Sept 8, 2023
+KernelVersion:	6.7.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Name of driver to be bounded to the wq.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
index 31dbb390573f..c431f0a13cf5 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -3,7 +3,7 @@ KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading this returns the valid values that can be written to the
-		on_altvoltage0_mode attribute:
+		filter_mode attribute:
 
 		- auto -> Adjust bandpass filter to track changes in input clock rate.
 		- manual -> disable/unregister the clock rate notifier / input clock tracking.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b6..af31e5a22d89 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-pci
index ecf47559f495..7f3e6bc3ff0f 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
index 5a775b8f6543..fc82aa4e54b0 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
@@ -75,3 +75,13 @@ Description:
 		The default value is 1  (GNU Remote Debug command).
 		Other permissible value is 0 which is for vendor defined debug
 		target.
+
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_poll_interval_ms
+Date:		February 2024
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		This attribute adjust the polling interval used to check for
+		DbC events. Unit is milliseconds. Accepted values range from 0
+		up to 5000. The default value is 64 ms.
+		This polling interval is used while DbC is enabled but has no
+		active data transfers.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index 5e6b74f30406..1e7e0bb4c14e 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <nm@ti.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-led
index b2ff0012c0f2..2e24ac3bd7ef 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-led
@@ -59,15 +59,6 @@ Description:
 		brightness. Reading this file when no hw brightness change
 		event has happened will return an ENODATA error.
 
-What:		/sys/class/leds/<led>/color
-Date:		June 2023
-KernelVersion:	6.5
-Description:
-		Color of the LED.
-
-		This is a read-only file. Reading this file returns the color
-		of the LED as a string (e.g: "red", "green", "multicolor").
-
 What:		/sys/class/leds/<led>/trigger
 Date:		March 2006
 KernelVersion:	2.6.17
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928a..5bff64d256c2 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361..53e508c6936a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 7ecd5c8161a6..cfa393c51f4d 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -514,17 +514,21 @@ Description:	information about CPUs heterogeneity.
 
 What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/indirect_target_selection
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsa
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
+		/sys/devices/system/cpu/vulnerabilities/vmscape
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -564,7 +568,8 @@ Description:	Control Symmetric Multi Threading (SMT)
 			 ================ =========================================
 
 			 If control status is "forceoff" or "notsupported" writes
-			 are rejected.
+			 are rejected. Note that enabling SMT on PowerPC skips
+			 offline cores.
 
 What:		/sys/devices/system/cpu/cpuX/power/energy_perf_bias
 Date:		March 2019
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-driver-qat
index ef6d6c57105e..96834d103a09 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-driver-qat
@@ -29,6 +29,8 @@ Description:	(RW) Reports the current configuration of the QAT device.
 		  services
 		* asym;sym: identical to sym;asym
 		* dc: the device is configured for running compression services
+		* dcc: identical to dc but enables the dc chaining feature,
+		  hash then compression. If this is not required chose dc
 		* sym: the device is configured for running symmetric crypto
 		  services
 		* asym: the device is configured for running asymmetric crypto
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index 0c7efaf62de0..84131641580c 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -711,7 +711,7 @@ Description:	This file shows the thin provisioning type. This is one of
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index 36c3cb547901..33675e718a37 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -311,10 +311,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-xfs linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-fs-xfs
index f704925f6fe9..82d8e2f79834 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-xfs
+++ linux-libre-6.6.139-gnu/Documentation/ABI/testing/sysfs-fs-xfs
@@ -1,7 +1,7 @@
 What:		/sys/fs/xfs/<disk>/log/log_head_lsn
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The log sequence number (LSN) of the current head of the
 		log. The LSN is exported in "cycle:basic block" format.
@@ -10,7 +10,7 @@ Users:		xfstests
 What:		/sys/fs/xfs/<disk>/log/log_tail_lsn
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The log sequence number (LSN) of the current tail of the
 		log. The LSN is exported in "cycle:basic block" format.
@@ -18,7 +18,7 @@ Description:
 What:		/sys/fs/xfs/<disk>/log/reserve_grant_head
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The current state of the log reserve grant head. It
 		represents the total log reservation of all currently
@@ -29,7 +29,7 @@ Users:		xfstests
 What:		/sys/fs/xfs/<disk>/log/write_grant_head
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The current state of the log write grant head. It
 		represents the total log reservation of all currently
diff --git linux-libre-6.6-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst linux-libre-6.6.139-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
index 70d3bc90893f..949c0d35694c 100644
--- linux-libre-6.6-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
+++ linux-libre-6.6.139-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -52,14 +52,14 @@ pci-epf-vntb device, the following commands can be used::
 	# cd /sys/kernel/config/pci_ep/
 	# mkdir functions/pci_epf_vntb/func1
 
-The "mkdir func1" above creates the pci-epf-ntb function device that will
+The "mkdir func1" above creates the pci-epf-vntb function device that will
 be probed by pci_epf_vntb driver.
 
 The PCI endpoint framework populates the directory with the following
 configurable fields::
 
-	# ls functions/pci_epf_ntb/func1
-	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+	# ls functions/pci_epf_vntb/func1
+	baseclass_code    deviceid          msi_interrupts    pci-epf-vntb.0
 	progif_code       secondary         subsys_id         vendorid
 	cache_line_size   interrupt_pin     msix_interrupts   primary
 	revid             subclass_code     subsys_vendor_id
@@ -106,13 +106,13 @@ A sample configuration for virtual NTB driver for virtual PCI bus::
 	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
 	# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
 
-Binding pci-epf-ntb Device to EP Controller
+Binding pci-epf-vntb Device to EP Controller
 --------------------------------------------
 
 NTB function device should be attached to PCI endpoint controllers
 connected to the host.
 
-	# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
+	# ln -s controllers/5f010000.pcie_ep functions/pci_epf_vntb/func1/primary
 
 Once the above step is completed, the PCI endpoint controllers are ready to
 establish a link with the host.
@@ -134,7 +134,7 @@ lspci Output at Host side
 -------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
 	# lspci
         00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
@@ -147,7 +147,7 @@ lspci Output at EP Side / Virtual PCI bus
 -----------------------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
         # lspci
         10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
diff --git linux-libre-6.6-gnu/Documentation/RCU/stallwarn.rst linux-libre-6.6.139-gnu/Documentation/RCU/stallwarn.rst
index ca7b7cd806a1..30080ff6f406 100644
--- linux-libre-6.6-gnu/Documentation/RCU/stallwarn.rst
+++ linux-libre-6.6.139-gnu/Documentation/RCU/stallwarn.rst
@@ -249,7 +249,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-obsolete.rst
index d095867899c5..594e697aa1b2 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-obsolete.rst
@@ -7,5 +7,5 @@ marked to be removed at some later point in time.
 The description of the interface will document the reason why it is
 obsolete and when it can be expected to be removed.
 
-.. kernel-abi:: $srctree/Documentation/ABI/obsolete
+.. kernel-abi:: ABI/obsolete
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-removed.rst
index f7e9e43023c1..f9e000c81828 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-removed.rst
@@ -1,5 +1,5 @@
 ABI removed symbols
 ===================
 
-.. kernel-abi:: $srctree/Documentation/ABI/removed
+.. kernel-abi:: ABI/removed
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-stable.rst
index 70490736e0d3..fc3361d847b1 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-stable.rst
@@ -10,5 +10,5 @@ for at least 2 years.
 Most interfaces (like syscalls) are expected to never change and always
 be available.
 
-.. kernel-abi:: $srctree/Documentation/ABI/stable
+.. kernel-abi:: ABI/stable
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-testing.rst
index b205b16a72d0..19767926b344 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/abi-testing.rst
@@ -16,5 +16,5 @@ Programs that use these interfaces are strongly encouraged to add their
 name to the description of these interfaces, so that the kernel
 developers can easily notify them if any changes occur.
 
-.. kernel-abi:: $srctree/Documentation/ABI/testing
+.. kernel-abi:: ABI/testing
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/blockdev/zram.rst
index e4551579cb12..ee2b0030d416 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -328,7 +328,7 @@ as idle::
 From now on, any pages on zram are idle pages. The idle mark
 will be removed until someone requests access of the block.
 IOW, unless there is access request, those pages are still idle pages.
-Additionally, when CONFIG_ZRAM_MEMORY_TRACKING is enabled pages can be
+Additionally, when CONFIG_ZRAM_TRACK_ENTRY_ACTIME is enabled pages can be
 marked as idle based on how long (in seconds) it's been since they were
 last accessed::
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/cgroup-v2.rst
index b26b5274eaaf..622a7f28db1f 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -1532,6 +1532,15 @@ PAGE_SIZE multiple when read back.
 		collapsing an existing range of pages. This counter is not
 		present when CONFIG_TRANSPARENT_HUGEPAGE is not set.
 
+	  thp_swpout (npn)
+		Number of transparent hugepages which are swapout in one piece
+		without splitting.
+
+	  thp_swpout_fallback (npn)
+		Number of transparent hugepages which were split before swapout.
+		Usually because failed to allocate some continuous swap space
+		for the huge page.
+
   memory.numa_stat
 	A read-only nested-keyed file which exists on non-root cgroups.
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/cifs/usage.rst
index 5f936b4b6018..3de599cf0779 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -722,40 +722,26 @@ Configuration pseudo-files:
 ======================= =======================================================
 SecurityFlags		Flags which control security negotiation and
 			also packet signing. Authentication (may/must)
-			flags (e.g. for NTLM and/or NTLMv2) may be combined with
+			flags (e.g. for NTLMv2) may be combined with
 			the signing flags.  Specifying two different password
 			hashing mechanisms (as "must use") on the other hand
 			does not make much sense. Default flags are::
 
-				0x07007
-
-			(NTLM, NTLMv2 and packet signing allowed).  The maximum
-			allowable flags if you want to allow mounts to servers
-			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed).  Some
-			SecurityFlags require the corresponding menuconfig
-			options to be enabled.  Enabling plaintext
-			authentication currently requires also enabling
-			lanman authentication in the security flags
-			because the cifs module only supports sending
-			laintext passwords using the older lanman dialect
-			form of the session setup SMB.  (e.g. for authentication
-			using plain text passwords, set the SecurityFlags
-			to 0x30030)::
+				0x00C5
+
+			(NTLMv2 and packet signing allowed).  Some SecurityFlags
+			may require enabling a corresponding menuconfig option.
 
 			  may use packet signing			0x00001
 			  must use packet signing			0x01001
-			  may use NTLM (most common password hash)	0x00002
-			  must use NTLM					0x02002
 			  may use NTLMv2				0x00004
 			  must use NTLMv2				0x04004
-			  may use Kerberos security			0x00008
-			  must use Kerberos				0x08008
-			  may use lanman (weak) password hash		0x00010
-			  must use lanman password hash			0x10010
-			  may use plaintext passwords			0x00020
-			  must use plaintext passwords			0x20020
-			  (reserved for future packet encryption)	0x00040
+			  may use Kerberos security (krb5)		0x00008
+			  must use Kerberos                             0x08008
+			  may use NTLMSSP               		0x00080
+			  must use NTLMSSP           			0x80080
+			  seal (packet encryption)			0x00040
+			  must seal                                     0x40040
 
 cifsFYI			If set to non-zero value, additional debug information
 			will be logged to the system error log.  This field
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/features.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/features.rst
index 8c167082a84f..7651eca38227 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features
+.. kernel-feat:: features
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
index cf1eeefdfc32..a92e10ec402e 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -67,8 +67,8 @@ arg4:
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
-    userspace pointer to an unsigned long for storing the cookie returned by
-    ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
+    userspace pointer to an unsigned long long for storing the cookie returned
+    by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
 
 In order for a process to push a cookie to, or pull a cookie from a process, it
 is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/index.rst
index de99caabf65a..5d6c001b8a98 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -21,3 +21,6 @@ are configurable at compile, boot or run time.
    cross-thread-rsb
    srso
    gather_data_sampling
+   reg-file-data-sampling
+   indirect-target-selection
+   vmscape
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
new file mode 100644
index 000000000000..52fed64bfb78
--- /dev/null
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Indirect Target Selection (ITS)
+===============================
+
+ITS is a vulnerability in some Intel CPUs that support Enhanced IBRS and were
+released before Alder Lake. ITS may allow an attacker to control the prediction
+of indirect branches and RETs located in the lower half of a cacheline.
+
+ITS is assigned CVE-2024-28956 with a CVSS score of 4.7 (Medium).
+
+Scope of Impact
+---------------
+- **eIBRS Guest/Host Isolation**: Indirect branches in KVM/kernel may still be
+  predicted with unintended target corresponding to a branch in the guest.
+
+- **Intra-Mode BTI**: In-kernel training such as through cBPF or other native
+  gadgets.
+
+- **Indirect Branch Prediction Barrier (IBPB)**: After an IBPB, indirect
+  branches may still be predicted with targets corresponding to direct branches
+  executed prior to the IBPB. /*(DEBLOBBED)*/
+
+Affected CPUs
+-------------
+Below is the list of ITS affected CPUs [#f2]_ [#f3]_:
+
+   ========================  ============  ====================  ===============
+   Common name               Family_Model  eIBRS                 Intra-mode BTI
+                                           Guest/Host Isolation
+   ========================  ============  ====================  ===============
+   SKYLAKE_X (step >= 6)     06_55H        Affected              Affected
+   ICELAKE_X                 06_6AH        Not affected          Affected
+   ICELAKE_D                 06_6CH        Not affected          Affected
+   ICELAKE_L                 06_7EH        Not affected          Affected
+   TIGERLAKE_L               06_8CH        Not affected          Affected
+   TIGERLAKE                 06_8DH        Not affected          Affected
+   KABYLAKE_L (step >= 12)   06_8EH        Affected              Affected
+   KABYLAKE (step >= 13)     06_9EH        Affected              Affected
+   COMETLAKE                 06_A5H        Affected              Affected
+   COMETLAKE_L               06_A6H        Affected              Affected
+   ROCKETLAKE                06_A7H        Not affected          Affected
+   ========================  ============  ====================  ===============
+
+- All affected CPUs enumerate Enhanced IBRS feature.
+- IBPB isolation is affected on all ITS affected CPUs, and need a microcode
+  update for mitigation.
+- None of the affected CPUs enumerate BHI_CTRL which was introduced in Golden
+  Cove (Alder Lake and Sapphire Rapids). This can help guests to determine the
+  host's affected status.
+- Intel Atom CPUs are not affected by ITS.
+
+Mitigation
+----------
+As only the indirect branches and RETs that have their last byte of instruction
+in the lower half of the cacheline are vulnerable to ITS, the basic idea behind
+the mitigation is to not allow indirect branches in the lower half.
+
+This is achieved by relying on existing retpoline support in the kernel, and in
+compilers. ITS-vulnerable retpoline sites are runtime patched to point to newly
+added ITS-safe thunks. These safe thunks consists of indirect branch in the
+second half of the cacheline. Not all retpoline sites are patched to thunks, if
+a retpoline site is evaluated to be ITS-safe, it is replaced with an inline
+indirect branch.
+
+Dynamic thunks
+~~~~~~~~~~~~~~
+From a dynamically allocated pool of safe-thunks, each vulnerable site is
+replaced with a new thunk, such that they get a unique address. This could
+improve the branch prediction accuracy. Also, it is a defense-in-depth measure
+against aliasing.
+
+Note, for simplicity, indirect branches in eBPF programs are always replaced
+with a jump to a static thunk in __x86_indirect_its_thunk_array. If required,
+in future this can be changed to use dynamic thunks.
+
+All vulnerable RETs are replaced with a static thunk, they do not use dynamic
+thunks. This is because RETs get their prediction from RSB mostly that does not
+depend on source address. RETs that underflow RSB may benefit from dynamic
+thunks. But, RETs significantly outnumber indirect branches, and any benefit
+from a unique source address could be outweighed by the increased icache
+footprint and iTLB pressure.
+
+Retpoline
+~~~~~~~~~
+Retpoline sequence also mitigates ITS-unsafe indirect branches. For this
+reason, when retpoline is enabled, ITS mitigation only relocates the RETs to
+safe thunks. Unless user requested the RSB-stuffing mitigation.
+
+RSB Stuffing
+~~~~~~~~~~~~
+RSB-stuffing via Call Depth Tracking is a mitigation for Retbleed RSB-underflow
+attacks. And it also mitigates RETs that are vulnerable to ITS.
+
+Mitigation in guests
+^^^^^^^^^^^^^^^^^^^^
+All guests deploy ITS mitigation by default, irrespective of eIBRS enumeration
+and Family/Model of the guest. This is because eIBRS feature could be hidden
+from a guest. One exception to this is when a guest enumerates BHI_DIS_S, which
+indicates that the guest is running on an unaffected host.
+
+To prevent guests from unnecessarily deploying the mitigation on unaffected
+platforms, Intel has defined ITS_NO bit(62) in MSR IA32_ARCH_CAPABILITIES. When
+a guest sees this bit set, it should not enumerate the ITS bug. Note, this bit
+is not set by any hardware, but is **intended for VMMs to synthesize** it for
+guests as per the host's affected status.
+
+Mitigation options
+^^^^^^^^^^^^^^^^^^
+The ITS mitigation can be controlled using the "indirect_target_selection"
+kernel parameter. The available options are:
+
+   ======== ===================================================================
+   on       (default)  Deploy the "Aligned branch/return thunks" mitigation.
+	    If spectre_v2 mitigation enables retpoline, aligned-thunks are only
+	    deployed for the affected RET instructions. Retpoline mitigates
+	    indirect branches.
+
+   off      Disable ITS mitigation.
+
+   vmexit   Equivalent to "=on" if the CPU is affected by guest/host isolation
+	    part of ITS. Otherwise, mitigation is not deployed. This option is
+	    useful when host userspace is not in the threat model, and only
+	    attacks from guest to host are considered.
+
+   stuff    Deploy RSB-fill mitigation when retpoline is also deployed.
+	    Otherwise, deploy the default mitigation. When retpoline mitigation
+	    is enabled, RSB-stuffing via Call-Depth-Tracking also mitigates
+	    ITS.
+
+   force    Force the ITS bug and deploy the default mitigation.
+   ======== ===================================================================
+
+Sysfs reporting
+---------------
+
+The sysfs file showing ITS mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+
+Note, microcode mitigation status is not reported in this file.
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - Not affected
+     - The processor is not vulnerable.
+   * - Vulnerable
+     - System is vulnerable and no mitigation has been applied.
+   * - Vulnerable, KVM: Not affected
+     - System is vulnerable to intra-mode BTI, but not affected by eIBRS
+       guest/host isolation.
+   * - Mitigation: Aligned branch/return thunks
+     - The mitigation is enabled, affected indirect branches and RETs are
+       relocated to safe thunks.
+   * - Mitigation: Retpolines, Stuffing RSB
+     - The mitigation is enabled using retpoline and RSB stuffing.
+
+References
+----------
+.. [#f1] /*(DEBLOBBED)*/
+
+.. [#f2] Affected Processors list - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
+
+.. [#f3] Affected Processors list (machine readable) - https://github.com/intel/Intel-affected-processor-list
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
index c98fd11907cc..e916dc232b0f 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -157,9 +157,7 @@ This is achieved by using the otherwise unused and obsolete VERW instruction in
 combination with a microcode update. The microcode clears the affected CPU
 buffers when the VERW instruction is executed.
 
-Kernel reuses the MDS function to invoke the buffer clearing:
-
-	mds_clear_cpu_buffers()
+Kernel does the buffer clearing with x86_clear_cpu_buffers().
 
 On MDS affected CPUs, the kernel already invokes CPU buffer clear on
 kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 000000000000..0585d02b9a6c
--- /dev/null
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ATOM_GRACEMONT          06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index 32a8893e5617..e0a1be97fa75 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -138,11 +138,10 @@ associated with the source address of the indirect branch. Specifically,
 the BHB might be shared across privilege levels even in the presence of
 Enhanced IBRS.
 
-Currently the only known real-world BHB attack vector is via
-unprivileged eBPF. Therefore, it's highly recommended to not enable
-unprivileged eBPF, especially when eIBRS is used (without retpolines).
-For a full mitigation against BHB attacks, it's recommended to use
-retpolines (or eIBRS combined with retpolines).
+Previously the only known real-world BHB attack vector was via unprivileged
+eBPF. Further research has found attacks that don't require unprivileged eBPF.
+For a full mitigation against BHB attacks it is recommended to set BHI_DIS_S or
+use the BHB clearing sequence.
 
 Attack scenarios
 ----------------
@@ -430,6 +429,23 @@ The possible values in this file are:
   'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
   ===========================  =======================================================
 
+  - Branch History Injection (BHI) protection status:
+
+.. list-table::
+
+ * - BHI: Not affected
+   - System is not affected
+ * - BHI: Retpoline
+   - System is protected by retpoline
+ * - BHI: BHI_DIS_S
+   - System is protected by BHI_DIS_S
+ * - BHI: SW loop, KVM SW loop
+   - System is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -484,7 +500,11 @@ Spectre variant 2
 
    Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
    boot, by setting the IBRS bit, and they're automatically protected against
-   Spectre v2 variant attacks.
+   some Spectre v2 variant attacks. The BHB can still influence the choice of
+   indirect branch predictor entry, and although branch predictor entries are
+   isolated between modes when eIBRS is enabled, the BHB itself is not isolated
+   between modes. Systems which support BHI_DIS_S will set it to protect against
+   BHI attacks.
 
    On Intel's enhanced IBRS systems, this includes cross-thread branch target
    injections on SMT systems (STIBP). In other words, Intel eIBRS enables
@@ -638,6 +658,18 @@ kernel command line.
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+	spectre_bhi=
+
+		[X86] Control mitigation of Branch History Injection
+		(BHI) vulnerability.  This setting affects the deployment
+		of the HW BHI control and the SW BHB clearing sequence.
+
+		on
+			(default) Enable the HW or SW mitigation as
+			needed.
+		off
+			Disable the mitigation.
+
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 
 Mitigation selection guide
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/srso.rst
index b6cfb51cb0b4..e715bfc09879 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -46,12 +46,22 @@ The possible values in this file are:
 
    The processor is not vulnerable
 
- * 'Vulnerable: no microcode':
+* 'Vulnerable':
+
+   The processor is vulnerable and no mitigations have been applied.
+
+ * 'Vulnerable: No microcode':
 
    The processor is vulnerable, no microcode extending IBPB
    functionality to address the vulnerability has been applied.
 
- * 'Mitigation: microcode':
+ * 'Vulnerable: Safe RET, no microcode':
+
+   The "Safe RET" mitigation (see below) has been applied to protect the
+   kernel, but the IBPB-extending microcode has not been applied.  User
+   space tasks may still be vulnerable.
+
+ * 'Vulnerable: Microcode, no safe RET':
 
    Extended IBPB functionality microcode patch has been applied. It does
    not address User->Kernel and Guest->Host transitions protection but it
@@ -72,11 +82,11 @@ The possible values in this file are:
 
    (spec_rstack_overflow=microcode)
 
- * 'Mitigation: safe RET':
+ * 'Mitigation: Safe RET':
 
-   Software-only mitigation. It complements the extended IBPB microcode
-   patch functionality by addressing User->Kernel and Guest->Host
-   transitions protection.
+   Combined microcode/software mitigation. It complements the
+   extended IBPB microcode patch functionality by addressing
+   User->Kernel and Guest->Host transitions protection.
 
    Selected by default or by spec_rstack_overflow=safe-ret
 
@@ -129,7 +139,7 @@ an indrect branch prediction barrier after having applied the required
 microcode patch for one's system. This mitigation comes also at
 a performance cost.
 
-Mitigation: safe RET
+Mitigation: Safe RET
 --------------------
 
 The mitigation works by ensuring all RET instructions speculate to
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst
new file mode 100644
index 000000000000..d9b9a2b6c114
--- /dev/null
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst
@@ -0,0 +1,110 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+VMSCAPE
+=======
+
+VMSCAPE is a vulnerability that may allow a guest to influence the branch
+prediction in host userspace. It particularly affects hypervisors like QEMU.
+
+Even if a hypervisor may not have any sensitive data like disk encryption keys,
+guest-userspace may be able to attack the guest-kernel using the hypervisor as
+a confused deputy.
+
+Affected processors
+-------------------
+
+The following CPU families are affected by VMSCAPE:
+
+**Intel processors:**
+  - Skylake generation (Parts without Enhanced-IBRS)
+  - Cascade Lake generation - (Parts affected by ITS guest/host separation)
+  - Alder Lake and newer (Parts affected by BHI)
+
+Note that, BHI affected parts that use BHB clearing software mitigation e.g.
+Icelake are not vulnerable to VMSCAPE.
+
+**AMD processors:**
+  - Zen series (families 0x17, 0x19, 0x1a)
+
+** Hygon processors:**
+ - Family 0x18
+
+Mitigation
+----------
+
+Conditional IBPB
+----------------
+
+Kernel tracks when a CPU has run a potentially malicious guest and issues an
+IBPB before the first exit to userspace after VM-exit. If userspace did not run
+between VM-exit and the next VM-entry, no IBPB is issued.
+
+Note that the existing userspace mitigation against Spectre-v2 is effective in
+protecting the userspace. They are insufficient to protect the userspace VMMs
+from a malicious guest. This is because Spectre-v2 mitigations are applied at
+context switch time, while the userspace VMM can run after a VM-exit without a
+context switch.
+
+Vulnerability enumeration and mitigation is not applied inside a guest. This is
+because nested hypervisors should already be deploying IBPB to isolate
+themselves from nested guests.
+
+SMT considerations
+------------------
+
+When Simultaneous Multi-Threading (SMT) is enabled, hypervisors can be
+vulnerable to cross-thread attacks. For complete protection against VMSCAPE
+attacks in SMT environments, STIBP should be enabled.
+
+The kernel will issue a warning if SMT is enabled without adequate STIBP
+protection. Warning is not issued when:
+
+- SMT is disabled
+- STIBP is enabled system-wide
+- Intel eIBRS is enabled (which implies STIBP protection)
+
+System information and options
+------------------------------
+
+The sysfs file showing VMSCAPE mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/vmscape
+
+The possible values in this file are:
+
+ * 'Not affected':
+
+   The processor is not vulnerable to VMSCAPE attacks.
+
+ * 'Vulnerable':
+
+   The processor is vulnerable and no mitigation has been applied.
+
+ * 'Mitigation: IBPB before exit to userspace':
+
+   Conditional IBPB mitigation is enabled. The kernel tracks when a CPU has
+   run a potentially malicious guest and issues an IBPB before the first
+   exit to userspace after VM-exit.
+
+ * 'Mitigation: IBPB on VMEXIT':
+
+   IBPB is issued on every VM-exit. This occurs when other mitigations like
+   RETBLEED or SRSO are already issuing IBPB on VM-exit.
+
+Mitigation control on the kernel command line
+----------------------------------------------
+
+The mitigation can be controlled via the ``vmscape=`` command line parameter:
+
+ * ``vmscape=off``:
+
+   Disable the VMSCAPE mitigation.
+
+ * ``vmscape=ibpb``:
+
+   Enable conditional IBPB mitigation (default when CONFIG_MITIGATION_VMSCAPE=y).
+
+ * ``vmscape=force``:
+
+   Force vulnerability detection and mitigation even on processors that are
+   not known to be affected.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 599e8d3bcbc3..9235cf4fbabf 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -172,7 +172,7 @@ variables.
 Offset of the free_list's member. This value is used to compute the number
 of free pages.
 
-Each zone has a free_area structure array called free_area[MAX_ORDER + 1].
+Each zone has a free_area structure array called free_area[NR_PAGE_ORDERS].
 The free_list represents a linked list of free page blocks.
 
 (list_head, next|prev)
@@ -189,8 +189,8 @@ Offsets of the vmap_area's members. They carry vmalloc-specific
 information. Makedumpfile gets the start address of the vmalloc region
 from this.
 
-(zone.free_area, MAX_ORDER + 1)
--------------------------------
+(zone.free_area, NR_PAGE_ORDERS)
+--------------------------------
 
 Free areas descriptor. User-space tools use this value to iterate the
 free_area ranges. MAX_ORDER is used by the zone buddy allocator.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.6.139-gnu/Documentation/admin-guide/kernel-parameters.txt
index 0a1731a0f0ef..fdbc2749fbb3 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -664,12 +664,6 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clocksource.max_cswd_read_retries= [KNL]
-			Number of clocksource_watchdog() retries due to
-			external delays before the clock will be marked
-			unstable.  Defaults to two retries, that is,
-			three attempts to read the clock under test.
-
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
 			marked with CLOCK_SOURCE_VERIFY_PERCPU that
@@ -1133,6 +1127,26 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
+	reg_file_data_sampling=
+			[X86] Controls mitigation for Register File Data
+			Sampling (RFDS) vulnerability. RFDS is a CPU
+			vulnerability which may allow userspace to infer
+			kernel data values previously stored in floating point
+			registers, vector registers, or integer registers.
+			RFDS only affects Intel Atom processors.
+
+			on:	Turns ON the mitigation.
+			off:	Turns OFF the mitigation.
+
+			This parameter overrides the compile time default set
+			by CONFIG_MITIGATION_RFDS. Mitigation cannot be
+			disabled when other VERW based mitigations (like MDS)
+			are enabled. In order to disable RFDS mitigation all
+			VERW based mitigations need to be disabled.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
+
 	driver_async_probe=  [KNL]
 			List of driver names to be probed asynchronously. *
 			matches with all driver names. If * is specified, the
@@ -2046,6 +2060,23 @@
 			different crypto accelerators. This option can be used
 			to achieve best performance for particular HW.
 
+	indirect_target_selection= [X86,Intel] Mitigation control for Indirect
+			Target Selection(ITS) bug in Intel CPUs. Updated
+			microcode is also required for a fix in IBPB.
+
+			on:     Enable mitigation (default).
+			off:    Disable mitigation.
+			force:	Force the ITS bug and deploy default
+				mitigation.
+			vmexit: Only deploy mitigation if CPU is affected by
+				guest/host isolation part of ITS.
+			stuff:	Deploy RSB-fill mitigation when retpoline is
+				also deployed. Otherwise, deploy the default
+				mitigation.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -3249,9 +3280,7 @@
 
 	mem_encrypt=	[X86-64] AMD Secure Memory Encryption (SME) control
 			Valid arguments: on, off
-			Default (depends on kernel configuration option):
-			  on  (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y)
-			  off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n)
+			Default: off
 			mem_encrypt=on:		Activate SME
 			mem_encrypt=off:	Do not activate SME
 
@@ -3275,6 +3304,11 @@
 
 	mga=		[HW,DRM]
 
+	microcode.force_minrev=	[X86]
+			Format: <bool>
+			Enable or disable the microcode minimal revision
+			enforcement for the runtime microcode loader.
+
 	min_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory below this
 			physical address is ignored.
 
@@ -3305,12 +3339,16 @@
 			arch-independent options, each of which is an
 			aggregation of existing arch-specific options.
 
+			Note, "mitigations" is supported if and only if the
+			kernel was built with CPU_MITIGATIONS=y.
+
 			off
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
 				Equivalent to: if nokaslr then kpti=0 [ARM64]
 					       gather_data_sampling=off [X86]
+					       indirect_target_selection=off [X86]
 					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
@@ -3322,12 +3360,15 @@
 					       nospectre_bhb [ARM64]
 					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
+					       reg_file_data_sampling=off [X86]
 					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
 					       spectre_v2_user=off [X86]
 					       srbds=off [X86,INTEL]
 					       ssbd=force-off [ARM64]
 					       tsx_async_abort=off [X86]
+					       vmscape=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -4622,6 +4663,16 @@
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
+	proc_mem.force_override= [KNL]
+			Format: {always | ptrace | never}
+			Traditionally /proc/pid/mem allows memory permissions to be
+			overridden without restrictions. This option may be set to
+			restrict that. Can be one of:
+			- 'always': traditional behavior always allows mem overrides.
+			- 'ptrace': only allow mem overrides for active ptracers.
+			- 'never':  never allow mem overrides.
+			If not specified, default is the CONFIG_PROC_MEM_* choice.
+
 	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.
@@ -4632,11 +4683,9 @@
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [<profiletype>,]<number>
-			Param: <profiletype>: "schedule", "sleep", or "kvm"
+			Param: <profiletype>: "schedule" or "kvm"
 				[defaults to kernel profiling]
 			Param: "schedule" - profile schedule points.
-			Param: "sleep" - profile D-state sleeping (millisecs).
-				Requires CONFIG_SCHEDSTATS
 			Param: "kvm" - profile VM exits.
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.
@@ -5589,6 +5638,9 @@
 
 	rootflags=	[KNL] Set root filesystem mount option string
 
+	initramfs_options= [KNL]
+                        Specify mount options for for the initramfs mount.
+
 	rootfstype=	[KNL] Set root filesystem type
 
 	rootwait	[KNL] Wait (indefinitely) for root device to show up.
@@ -5858,6 +5910,13 @@
 			This feature may be more efficiently disabled
 			using the csdlock_debug- kernel parameter.
 
+	smp.panic_on_ipistall= [KNL]
+			If a csd_lock_timeout extends for more than
+			the specified number of milliseconds, panic the
+			system.  By default, let CSD-lock acquisition
+			take as long as they take.  Specifying 300,000
+			for this value provides a 5-minute timeout.
+
 	smsc-ircc2.nopnp	[HW] Don't use PNP to discover SMC devices
 	smsc-ircc2.ircc_cfg=	[HW] Device configuration I/O port
 	smsc-ircc2.ircc_sir=	[HW] SIR base I/O port
@@ -5894,6 +5953,15 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/admin-guide/laptops/sonypi.rst
 
+	spectre_bhi=	[X86] Control mitigation of Branch History Injection
+			(BHI) vulnerability.  This setting affects the
+			deployment of the HW BHI control and the SW BHB
+			clearing sequence.
+
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
+
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
 			The default operation protects the kernel from
@@ -6581,6 +6649,19 @@
 			If not specified, "default" is used. In this case,
 			the RNG's choice is left to each individual trust source.
 
+	tsa=		[X86] Control mitigation for Transient Scheduler
+			Attacks on AMD CPUs. Search the following in your
+			favourite search engine for more details:
+
+			"Technical guidance for mitigating transient scheduler
+			attacks".
+
+			off		- disable the mitigation
+			on		- enable the mitigation (default)
+			user		- mitigate only user/kernel transitions
+			vm		- mitigate only guest/host transitions
+
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
@@ -6817,6 +6898,12 @@
 					pause after every control message);
 				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
 					delay after resetting its port);
+				p = USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT
+					(Reduce timeout of the SET_ADDRESS
+					request from 5000 ms to 500 ms);
+				q = USB_QUIRK_FORCE_ONE_CONFIG (Device
+					claims zero configurations,
+					forcing to 1);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
@@ -6994,6 +7081,16 @@
 	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
 			Format: <command>
 
+	vmscape=	[X86] Controls mitigation for VMscape attacks.
+			VMscape attacks can leak information from a userspace
+			hypervisor to a guest via speculative side-channels.
+
+			off		- disable the mitigation
+			ibpb		- use Indirect Branch Prediction Barrier
+					  (IBPB) mitigation (default)
+			force		- force vulnerability detection even on
+					  unaffected processors
+
 	vsyscall=	[X86-64]
 			Controls the behavior of vsyscalls (i.e. calls to
 			fixed addresses of 0xffffffffff600x00 from legacy
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/media/building.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/media/building.rst
index a06473429916..7a413ba07f93 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/media/building.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/media/building.rst
@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/media/saa7134.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/media/saa7134.rst
index 51eae7eb5ab7..18d7cbc897db 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/media/saa7134.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/media/saa7134.rst
@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/reclaim.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
index 343e25b252f4..024f4e252d24 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -71,6 +71,10 @@ of parametrs except ``enabled`` again.  Once the re-reading is done, this
 parameter is set as ``N``.  If invalid parameters are found while the
 re-reading, DAMON_RECLAIM will be disabled.
 
+Once ``Y`` is written to this parameter, the user must not write to any
+parameters until reading ``commit_inputs`` again returns ``N``.  If users
+violate this rule, the kernel may exhibit undefined behavior.
+
 min_age
 -------
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/mm/damon/usage.rst
index 8da1b7281827..9285f69f4f73 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/mm/damon/usage.rst
@@ -389,7 +389,7 @@ pages of all memory cgroups except ``/having_care_already``.::
     # # further filter out all cgroups except one at '/having_care_already'
     echo memcg > 1/type
     echo /having_care_already > 1/memcg_path
-    echo N > 1/matching
+    echo Y > 1/matching
 
 Note that ``anon`` and ``memcg`` filters are currently supported only when
 ``paddr`` `implementation <sysfs_contexts>` is being used.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-6.6.139-gnu/Documentation/admin-guide/sysctl/net.rst
index 4877563241f3..5f1748f33d9a 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-6.6.139-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -205,6 +205,11 @@ Will increase power usage.
 
 Default: 0 (off)
 
+mem_pcpu_rsv
+------------
+
+Per-cpu reserved forward alloc cache size in page units. Default 1MB per CPU.
+
 rmem_default
 ------------
 
diff --git linux-libre-6.6-gnu/Documentation/arch/arc/features.rst linux-libre-6.6.139-gnu/Documentation/arch/arc/features.rst
index b793583d688a..49ff446ff744 100644
--- linux-libre-6.6-gnu/Documentation/arch/arc/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/arc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arc
+.. kernel-feat:: features arc
diff --git linux-libre-6.6-gnu/Documentation/arch/arm/features.rst linux-libre-6.6.139-gnu/Documentation/arch/arm/features.rst
index 7414ec03dd15..0e76aaf68eca 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/arm/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm
+.. kernel-feat:: features arm
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/elf_hwcaps.rst linux-libre-6.6.139-gnu/Documentation/arch/arm64/elf_hwcaps.rst
index 76ff9d7398fd..f88a24d621dd 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/elf_hwcaps.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/arm64/elf_hwcaps.rst
@@ -174,22 +174,28 @@ HWCAP2_DCPODP
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
 
 HWCAP2_SVE2
-    Functionality implied by ID_AA64ZFR0_EL1.SVEVer == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0001.
 
 HWCAP2_SVEAES
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0001.
 
 HWCAP2_SVEPMULL
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0010.
 
 HWCAP2_SVEBITPERM
-    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001.
 
 HWCAP2_SVESHA3
-    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001.
 
 HWCAP2_SVESM4
-    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SM4 == 0b0001.
 
 HWCAP2_FLAGM2
     Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
@@ -198,16 +204,20 @@ HWCAP2_FRINT
     Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
 
 HWCAP2_SVEI8MM
-    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.I8MM == 0b0001.
 
 HWCAP2_SVEF32MM
-    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F32MM == 0b0001.
 
 HWCAP2_SVEF64MM
-    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F64MM == 0b0001.
 
 HWCAP2_SVEBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0001.
 
 HWCAP2_I8MM
     Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
@@ -273,7 +283,8 @@ HWCAP2_EBF16
     Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
 
 HWCAP2_SVE_EBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0010.
 
 HWCAP2_CSSC
     Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
@@ -282,7 +293,8 @@ HWCAP2_RPRFM
     Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
 
 HWCAP2_SVE2P1
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0010.
 
 HWCAP2_SME2
     Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst linux-libre-6.6.139-gnu/Documentation/arch/arm64/features.rst
index dfa4cb3cd3ef..03321f4309d0 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/arm64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm64
+.. kernel-feat:: features arm64
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.6.139-gnu/Documentation/arch/arm64/silicon-errata.rst
index f47f63bcf67c..fbc833841bef 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -54,6 +54,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
 +----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne AC04  | AC04_CPU_10     | AMPERE_ERRATUM_AC03_CPU_38  |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -71,6 +73,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #3117295        | ARM64_ERRATUM_3117295       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A520     | #2966298        | ARM64_ERRATUM_2966298       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
@@ -117,32 +121,74 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #3456084        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N3     | #3456111        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3AE   | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-600         | #1076982,1209401| N/A                         |
@@ -200,8 +246,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
-|                | Hip09 SMMU PMCG |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
@@ -233,3 +280,12 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ASR            | ASR8601         | #8601001        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst linux-libre-6.6.139-gnu/Documentation/arch/ia64/features.rst
index d7226fdcf5f8..056838d2ab55 100644
--- linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/ia64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features ia64
+.. kernel-feat:: features ia64
diff --git linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst linux-libre-6.6.139-gnu/Documentation/arch/loongarch/features.rst
index ebacade3ea45..009f44c7951f 100644
--- linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/loongarch/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst linux-libre-6.6.139-gnu/Documentation/arch/m68k/features.rst
index 5107a2119472..de7f0ccf7fc8 100644
--- linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/m68k/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features m68k
+.. kernel-feat:: features m68k
diff --git linux-libre-6.6-gnu/Documentation/arch/mips/features.rst linux-libre-6.6.139-gnu/Documentation/arch/mips/features.rst
index 1973d729b29a..6e0ffe3e7354 100644
--- linux-libre-6.6-gnu/Documentation/arch/mips/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/mips/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst linux-libre-6.6.139-gnu/Documentation/arch/nios2/features.rst
index 8449e63f69b2..89913810ccb5 100644
--- linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/nios2/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features nios2
+.. kernel-feat:: features nios2
diff --git linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst linux-libre-6.6.139-gnu/Documentation/arch/openrisc/features.rst
index 3f7c40d219f2..bae2e25adfd6 100644
--- linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/openrisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features openrisc
+.. kernel-feat:: features openrisc
diff --git linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst linux-libre-6.6.139-gnu/Documentation/arch/parisc/features.rst
index 501d7c450037..b3aa4d243b93 100644
--- linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/parisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features parisc
+.. kernel-feat:: features parisc
diff --git linux-libre-6.6-gnu/Documentation/arch/s390/features.rst linux-libre-6.6.139-gnu/Documentation/arch/s390/features.rst
index 57c296a9d8f3..2883dc950681 100644
--- linux-libre-6.6-gnu/Documentation/arch/s390/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/s390/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features s390
+.. kernel-feat:: features s390
diff --git linux-libre-6.6-gnu/Documentation/arch/sh/features.rst linux-libre-6.6.139-gnu/Documentation/arch/sh/features.rst
index f722af3b6c99..fae48fe81e9b 100644
--- linux-libre-6.6-gnu/Documentation/arch/sh/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/sh/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sh
+.. kernel-feat:: features sh
diff --git linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst linux-libre-6.6.139-gnu/Documentation/arch/sparc/features.rst
index c0c92468b0fe..96835b6d598a 100644
--- linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/sparc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sparc
+.. kernel-feat:: features sparc
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst linux-libre-6.6.139-gnu/Documentation/arch/x86/amd-memory-encryption.rst
index 934310ce7258..bace87cc9ca2 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/x86/amd-memory-encryption.rst
@@ -87,14 +87,14 @@ The state of SME in the Linux kernel can be documented as follows:
 	  kernel is non-zero).
 
 SME can also be enabled and activated in the BIOS. If SME is enabled and
-activated in the BIOS, then all memory accesses will be encrypted and it will
-not be necessary to activate the Linux memory encryption support.  If the BIOS
-merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate
-memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or
-by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
-not enable SME, then Linux will not be able to activate memory encryption, even
-if configured to do so by default or the mem_encrypt=on command line parameter
-is specified.
+activated in the BIOS, then all memory accesses will be encrypted and it
+will not be necessary to activate the Linux memory encryption support.
+
+If the BIOS merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG),
+then memory encryption can be enabled by supplying mem_encrypt=on on the
+kernel command line.  However, if BIOS does not enable SME, then Linux
+will not be able to activate memory encryption, even if configured to do
+so by default or the mem_encrypt=on command line parameter is specified.
 
 Secure Nested Paging (SNP)
 ==========================
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/features.rst linux-libre-6.6.139-gnu/Documentation/arch/x86/features.rst
index b663f15053ce..a33616346a38 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/x86/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features x86
+.. kernel-feat:: features x86
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst linux-libre-6.6.139-gnu/Documentation/arch/x86/mds.rst
index e73fdff62c0a..43106f349cc3 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/x86/mds.rst
@@ -93,7 +93,10 @@ enters a C-state.
 
 The kernel provides a function to invoke the buffer clearing:
 
-    mds_clear_cpu_buffers()
+    x86_clear_cpu_buffers()
+
+Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
+Other than CFLAGS.ZF, this macro doesn't clobber any registers.
 
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
@@ -138,17 +141,30 @@ Mitigation points
 
    When transitioning from kernel to user space the CPU buffers are flushed
    on affected CPUs when the mitigation is not disabled on the kernel
-   command line. The migitation is enabled through the static key
-   mds_user_clear.
-
-   The mitigation is invoked in prepare_exit_to_usermode() which covers
-   all but one of the kernel to user space transitions.  The exception
-   is when we return from a Non Maskable Interrupt (NMI), which is
-   handled directly in do_nmi().
-
-   (The reason that NMI is special is that prepare_exit_to_usermode() can
-    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
-    enable IRQs with NMIs blocked.)
+   command line. The mitigation is enabled through the feature flag
+   X86_FEATURE_CLEAR_CPU_BUF.
+
+   The mitigation is invoked just before transitioning to userspace after
+   user registers are restored. This is done to minimize the window in
+   which kernel data could be accessed after VERW e.g. via an NMI after
+   VERW.
+
+   **Corner case not handled**
+   Interrupts returning to kernel don't clear CPUs buffers since the
+   exit-to-user path is expected to do that anyways. But, there could be
+   a case when an NMI is generated in kernel after the exit-to-user path
+   has cleared the buffers. This case is not handled and NMI returning to
+   kernel don't clear CPU buffers because:
+
+   1. It is rare to get an NMI after VERW, but before returning to userspace.
+   2. For an unprivileged user, there is no known way to make that NMI
+      less rare or target it.
+   3. It would take a large number of these precisely-timed NMIs to mount
+      an actual attack.  There's presumably not enough bandwidth.
+   4. The NMI in question occurs after a VERW, i.e. when user state is
+      restored and most interesting data is already scrubbed. Whats left
+      is only the data that NMI touches, and that may or may not be of
+      any interest.
 
 
 2. C-State transition
@@ -169,9 +185,9 @@ Mitigation points
    idle clearing would be a window dressing exercise and is therefore not
    activated.
 
-   The invocation is controlled by the static key mds_idle_clear which is
-   switched depending on the chosen mitigation mode and the SMT state of
-   the system.
+   The invocation is controlled by the static key cpu_buf_idle_clear which is
+   switched depending on the chosen mitigation mode and the SMT state of the
+   system.
 
    The buffer clear is only invoked before entering the C-State to prevent
    that stale data from the idling CPU from spilling to the Hyper-Thread
diff --git linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst linux-libre-6.6.139-gnu/Documentation/arch/xtensa/features.rst
index 6b92c7bfa19d..28dcce1759be 100644
--- linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst
+++ linux-libre-6.6.139-gnu/Documentation/arch/xtensa/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features xtensa
+.. kernel-feat:: features xtensa
diff --git linux-libre-6.6-gnu/Documentation/bpf/map_hash.rst linux-libre-6.6.139-gnu/Documentation/bpf/map_hash.rst
index d2343952f2cb..8606bf958a8c 100644
--- linux-libre-6.6-gnu/Documentation/bpf/map_hash.rst
+++ linux-libre-6.6.139-gnu/Documentation/bpf/map_hash.rst
@@ -233,10 +233,16 @@ attempts in order to enforce the LRU property which have increasing impacts on
 other CPUs involved in the following operation attempts:
 
 - Attempt to use CPU-local state to batch operations
-- Attempt to fetch free nodes from global lists
+- Attempt to fetch ``target_free`` free nodes from global lists
 - Attempt to pull any node from a global list and remove it from the hashmap
 - Attempt to pull any node from any CPU's list and remove it from the hashmap
 
+The number of nodes to borrow from the global list in a batch, ``target_free``,
+depends on the size of the map. Larger batch size reduces lock contention, but
+may also exhaust the global structure. The value is computed at map init to
+avoid exhaustion, by limiting aggregate reservation by all CPUs to half the map
+size. With a minimum of a single element and maximum budget of 128 at a time.
+
 This algorithm is described visually in the following diagram. See the
 description in commit 3a08c2fd7634 ("bpf: LRU List") for a full explanation of
 the corresponding operations:
diff --git linux-libre-6.6-gnu/Documentation/bpf/map_lpm_trie.rst linux-libre-6.6.139-gnu/Documentation/bpf/map_lpm_trie.rst
index 74d64a30f500..f9cd579496c9 100644
--- linux-libre-6.6-gnu/Documentation/bpf/map_lpm_trie.rst
+++ linux-libre-6.6.139-gnu/Documentation/bpf/map_lpm_trie.rst
@@ -17,7 +17,7 @@ significant byte.
 
 LPM tries may be created with a maximum prefix length that is a multiple
 of 8, in the range from 8 to 2048. The key used for lookup and update
-operations is a ``struct bpf_lpm_trie_key``, extended by
+operations is a ``struct bpf_lpm_trie_key_u8``, extended by
 ``max_prefixlen/8`` bytes.
 
 - For IPv4 addresses the data length is 4 bytes
diff --git linux-libre-6.6-gnu/Documentation/bpf/map_lru_hash_update.dot linux-libre-6.6.139-gnu/Documentation/bpf/map_lru_hash_update.dot
index a0fee349d29c..ab10058f5b79 100644
--- linux-libre-6.6-gnu/Documentation/bpf/map_lru_hash_update.dot
+++ linux-libre-6.6.139-gnu/Documentation/bpf/map_lru_hash_update.dot
@@ -35,18 +35,18 @@ digraph {
   fn_bpf_lru_list_pop_free_to_local [shape=rectangle,fillcolor=2,
     label="Flush local pending,
     Rotate Global list, move
-    LOCAL_FREE_TARGET
+    target_free
     from global -> local"]
   // Also corresponds to:
   // fn__local_list_flush()
   // fn_bpf_lru_list_rotate()
   fn___bpf_lru_node_move_to_free[shape=diamond,fillcolor=2,
-    label="Able to free\nLOCAL_FREE_TARGET\nnodes?"]
+    label="Able to free\ntarget_free\nnodes?"]
 
   fn___bpf_lru_list_shrink_inactive [shape=rectangle,fillcolor=3,
     label="Shrink inactive list
       up to remaining
-      LOCAL_FREE_TARGET
+      target_free
       (global LRU -> local)"]
   fn___bpf_lru_list_shrink [shape=diamond,fillcolor=2,
     label="> 0 entries in\nlocal free list?"]
diff --git linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst linux-libre-6.6.139-gnu/Documentation/cdrom/cdrom-standard.rst
index 7964fe134277..6c1303cff159 100644
--- linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst
+++ linux-libre-6.6.139-gnu/Documentation/cdrom/cdrom-standard.rst
@@ -217,7 +217,7 @@ current *struct* is::
 		int (*media_changed)(struct cdrom_device_info *, int);
 		int (*tray_move)(struct cdrom_device_info *, int);
 		int (*lock_door)(struct cdrom_device_info *, int);
-		int (*select_speed)(struct cdrom_device_info *, int);
+		int (*select_speed)(struct cdrom_device_info *, unsigned long);
 		int (*get_last_session) (struct cdrom_device_info *,
 					 struct cdrom_multisession *);
 		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
 
 ::
 
-	int select_speed(struct cdrom_device_info *cdi, int speed)
+	int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
 
 Some CD-ROM drives are capable of changing their head-speed. There
 are several reasons for changing the speed of a CD-ROM drive. Badly
diff --git linux-libre-6.6-gnu/Documentation/conf.py linux-libre-6.6.139-gnu/Documentation/conf.py
index d4fdf6a3875a..e385e24fe9e7 100644
--- linux-libre-6.6-gnu/Documentation/conf.py
+++ linux-libre-6.6.139-gnu/Documentation/conf.py
@@ -345,9 +345,9 @@ sys.stderr.write("Using %s theme\n" % html_theme)
 html_static_path = ['sphinx-static']
 
 # If true, Docutils "smart quotes" will be used to convert quotes and dashes
-# to typographically correct entities.  This will convert "--" to "—",
-# which is not always what we want, so disable it.
-smartquotes = False
+# to typographically correct entities.  However, conversion of "--" to "—"
+# is not always what we want, so enable only quotes.
+smartquotes_action = 'q'
 
 # Custom sidebar templates, maps document names to template names.
 # Note that the RTD theme ignores this
@@ -383,6 +383,12 @@ latex_elements = {
         verbatimhintsturnover=false,
     ''',
 
+    #
+    # Some of our authors are fond of deep nesting; tell latex to
+    # cope.
+    #
+    'maxlistdepth': '10',
+
     # For CJK One-half spacing, need to be in front of hyperref
     'extrapackages': r'\usepackage{setspace}',
 
diff --git linux-libre-6.6-gnu/Documentation/core-api/symbol-namespaces.rst linux-libre-6.6.139-gnu/Documentation/core-api/symbol-namespaces.rst
index 12e4aecdae94..29875e25e376 100644
--- linux-libre-6.6-gnu/Documentation/core-api/symbol-namespaces.rst
+++ linux-libre-6.6.139-gnu/Documentation/core-api/symbol-namespaces.rst
@@ -28,6 +28,9 @@ kernel. As of today, modules that make use of symbols exported into namespaces,
 are required to import the namespace. Otherwise the kernel will, depending on
 its configuration, reject loading the module or warn about a missing import.
 
+Additionally, it is possible to put symbols into a module namespace, strictly
+limiting which modules are allowed to use these symbols.
+
 2. How to define Symbol Namespaces
 ==================================
 
@@ -84,6 +87,22 @@ unit as preprocessor statement. The above example would then read::
 within the corresponding compilation unit before any EXPORT_SYMBOL macro is
 used.
 
+2.3 Using the EXPORT_SYMBOL_GPL_FOR_MODULES() macro
+===================================================
+
+Symbols exported using this macro are put into a module namespace. This
+namespace cannot be imported.
+
+The macro takes a comma separated list of module names, allowing only those
+modules to access this symbol. Simple tail-globs are supported.
+
+For example:
+
+  EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
+
+will limit usage of this symbol to modules whoes name matches the given
+patterns.
+
 3. How to use Symbols exported in Namespaces
 ============================================
 
@@ -155,3 +174,6 @@ in-tree modules::
 You can also run nsdeps for external module builds. A typical usage is::
 
 	$ make -C <path_to_kernel_src> M=$PWD nsdeps
+
+Note: it will happily generate an import statement for the module namespace;
+which will not work and generates build and runtime failures.
diff --git linux-libre-6.6-gnu/Documentation/dev-tools/kselftest.rst linux-libre-6.6.139-gnu/Documentation/dev-tools/kselftest.rst
index deede972f254..3ae1b3677d7f 100644
--- linux-libre-6.6-gnu/Documentation/dev-tools/kselftest.rst
+++ linux-libre-6.6.139-gnu/Documentation/dev-tools/kselftest.rst
@@ -255,9 +255,21 @@ Contributing new tests (details)
 
    TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the
    executable which is not tested by default.
+
    TEST_FILES, TEST_GEN_FILES mean it is the file which is used by
    test.
 
+   TEST_INCLUDES is similar to TEST_FILES, it lists files which should be
+   included when exporting or installing the tests, with the following
+   differences:
+
+    * symlinks to files in other directories are preserved
+    * the part of paths below tools/testing/selftests/ is preserved when
+      copying the files to the output directory
+
+   TEST_INCLUDES is meant to list dependencies located in other directories of
+   the selftests hierarchy.
+
  * First use the headers inside the kernel source and/or git repo, and then the
    system headers.  Headers for the kernel release as opposed to headers
    installed by the distro on the system should be the primary focus to be able
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index ea3c5db6b52d..0f7e1b6ea81e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -55,8 +55,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 3bad47b7b02b..0b4afb4078ef 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -41,8 +41,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index adbfaea32343..90f31beb80c2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -136,7 +136,7 @@ description: |
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
   OS. These devices do not use the scheme described above. For details, see:
-  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
   $nodename:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b97b41..0c28292a5bb4 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -66,7 +66,7 @@ then:
   required:
     - refresh-rate-hz
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 5e942bccf277..2b2041818a0a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -40,6 +52,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +63,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7c8a3e8430d3..48a93690bb43 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -232,6 +232,7 @@ properties:
     type: boolean
 
 dependencies:
+  pd-disable: [typec-power-opmode]
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index 987aa83c2649..e956f524e379 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -87,7 +87,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   ports:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
index 91c774f106ce..ab1196d1ec2d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -59,7 +59,6 @@ properties:
           - const: bus
           - const: core
           - const: vsync
-          - const: lut
           - const: tbu
           - const: tbu_rt
         # MSM8996 has additional iommu clock
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 0999ea07f47b..e4576546bf0d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
index 4ebea60b8c5b..8c52fa0ea5f8 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -25,7 +25,7 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
+    maxItems: 2
 
   clock-names:
     items:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
index bc5594d18643..300bf2252c3e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -20,7 +20,7 @@ properties:
     maxItems: 2
 
   clocks:
-    minItems: 1
+    maxItems: 1
 
   clock-names:
     items:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 437db0c62339..e1b4b910044b 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -47,8 +47,8 @@ properties:
       - 3
 
   dma-channels:
-    minItems: 1
-    maxItems: 64
+    minimum: 1
+    maximum: 64
 
   clocks:
     minItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
index d481e78958a7..2c7355e9547a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -33,7 +33,7 @@ properties:
     const: 2
 
   "#interrupt-cells":
-    const: 1
+    const: 2
 
   ngpios:
     description:
@@ -84,7 +84,7 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
-        #interrupt-cells = <1>;
+        #interrupt-cells = <2>;
         interrupts = <53>, <53>, <53>, <53>,
                      <53>, <53>, <53>, <53>,
                      <53>, <53>, <53>, <53>,
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index c1060e5fcef3..d3d8a2e143ed 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -126,7 +126,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        gpio@e000a000 {
+        gpio@a0020000 {
             compatible = "xlnx,xps-gpio-1.00.a";
             reg = <0xa0020000 0x10000>;
             #gpio-cells = <2>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3ec399..c22e459c175a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -75,7 +75,7 @@ required:
   - clocks
 
 allOf:
-  - $ref: i2c-controller.yaml
+  - $ref: /schemas/i2c/i2c-controller.yaml#
   - if:
       properties:
         compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index ab151c9db219..580003cdfff5 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -21,7 +21,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index 424a4fc218b6..2cb311ddd912 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -103,7 +103,10 @@ properties:
 
   resets:
     items:
-      - description: module reset
+      - description:
+          Module reset. This property is optional for controllers in Tegra194,
+          Tegra234 etc where an internal software reset is available as an
+          alternative.
 
   reset-names:
     items:
@@ -119,6 +122,13 @@ properties:
       - const: rx
       - const: tx
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml
   - if:
@@ -172,6 +182,18 @@ allOf:
           items:
             - description: phandle to the VENC power domain
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nvidia,tegra194-i2c
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 9996dd93f84b..e1f450b80db2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -28,6 +28,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -39,12 +42,16 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
+  - clocks
 
 additionalProperties: false
 
@@ -55,7 +62,7 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        clocks = <&axi_clk>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index 96340a05754c..2beed2e2406c 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -26,7 +26,7 @@ properties:
     maxItems: 1
 
   spi-max-frequency:
-    maximum: 30000000
+    maximum: 66000000
 
   reset-gpios:
     maxItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
index c13c10c8d65d..eed0df9d3a23 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
index 9790f75fc669..fe5145d3b73c 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -23,7 +23,6 @@ properties:
           - ak8963
           - ak09911
           - ak09912
-          - ak09916
         deprecated: true
 
   reg:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
index 509d20c091af..6a206111d4e0 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -62,6 +62,9 @@ properties:
         - description: MPM pin number
         - description: GIC SPI number for the MPM pin
 
+  '#power-domain-cells':
+    const: 0
+
 required:
   - compatible
   - reg
@@ -93,4 +96,5 @@ examples:
                            <86 183>,
                            <90 260>,
                            <91 260>;
+        #power-domain-cells = <0>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index e850a8894758..bb40bb9e036e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -27,7 +27,7 @@ properties:
     description: |
       For multicolor LED support this property should be defined as either
       LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
     enum: [ 8, 9 ]
 
 required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index cf456f8d9ddc..c87677f5e2a2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -37,15 +37,15 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
@@ -59,9 +59,9 @@ required:
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,9 +82,9 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
index b68141264c0e..4d40e75b4e1e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -71,7 +71,7 @@ properties:
                 description:
                   Any lane can be inverted or not.
                 minItems: 1
-                maxItems: 2
+                maxItems: 3
 
             required:
               - data-lanes
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
index 7032c7e15039..3e128733ef53 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -61,6 +61,9 @@ properties:
       - description: used for 1st data pipe from RDMA
       - description: used for 2nd data pipe from RDMA
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -70,6 +73,7 @@ required:
   - clocks
   - iommus
   - mboxes
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -80,16 +84,17 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_rdma0: mdp3-rdma0@14001000 {
-      compatible = "mediatek,mt8183-mdp3-rdma";
-      reg = <0x14001000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
-                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-               <&mmsys CLK_MM_MDP_RSZ1>;
-      iommus = <&iommu>;
-      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
-               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
index 0baa77198fa2..64ea98aa0592 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -50,6 +50,9 @@ properties:
   iommus:
     maxItems: 1
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +61,7 @@ required:
   - power-domains
   - clocks
   - iommus
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -68,13 +72,14 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_wrot0: mdp3-wrot0@14005000 {
-      compatible = "mediatek,mt8183-mdp3-wrot";
-      reg = <0x14005000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
-                            <CMDQ_EVENT_MDP_WROT0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_WROT0>;
-      iommus = <&iommu>;
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index e466dff8286d..afcaa427d48b 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -90,15 +90,16 @@ properties:
         description: connection point for input on the parallel interface
 
         properties:
-          bus-type:
-            enum: [5, 6]
-
           endpoint:
             $ref: video-interfaces.yaml#
             unevaluatedProperties: false
 
-        required:
-          - bus-type
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
 
     anyOf:
       - required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
index 294693a8906c..10540aa7afa1 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -22,8 +22,9 @@ compatible:
 	"mediatek,mt6323" for PMIC MT6323
 	"mediatek,mt6331" for PMIC MT6331 and MT6332
 	"mediatek,mt6357" for PMIC MT6357
-	"mediatek,mt6358" for PMIC MT6358 and MT6366
+	"mediatek,mt6358" for PMIC MT6358
 	"mediatek,mt6359" for PMIC MT6359
+	"mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366
 	"mediatek,mt6397" for PMIC MT6397
 
 Optional subnodes:
@@ -40,6 +41,7 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-regulator"
 	see ../regulator/mt6323-regulator.txt
 		- compatible: "mediatek,mt6358-regulator"
+		- compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator"
 	see ../regulator/mt6358-regulator.txt
 		- compatible: "mediatek,mt6397-regulator"
 	see ../regulator/mt6397-regulator.txt
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index 05747e012516..ab26b1bd567f 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -50,15 +50,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
     description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000
 
   regulators:
     $ref: ../regulator/rohm,bd71815-regulator.yaml
@@ -67,7 +67,7 @@ properties:
 
   gpio-reserved-ranges:
     description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
@@ -113,7 +113,7 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: buck1 {
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 9fce8cd7b0b6..d24950ccea95 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -41,7 +41,7 @@ properties:
 patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
-    $ref: mmc-controller.yaml
+    $ref: sdhci-common.yaml
     unevaluatedProperties: false
 
     properties:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 58ae298cd2fc..23884b8184a9 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -25,7 +25,7 @@ properties:
   "#address-cells":
     const: 1
     description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.
 
   "#size-cells":
     const: 0
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
index b494e009326e..9925563e5e14 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -182,6 +182,13 @@ properties:
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
 
+  fsl,pps-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Specifies to which timer instance the PPS signal is routed.
+    enum: [0, 1, 2, 3]
+
   mdio:
     $ref: mdio.yaml#
     unevaluatedProperties: false
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
index e74502a0afe8..3202dc7967c5 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -337,8 +337,8 @@ allOf:
           minItems: 4
 
         clocks:
-          minItems: 34
-          maxItems: 34
+          minItems: 24
+          maxItems: 24
 
         clock-names:
           items:
@@ -351,18 +351,6 @@ allOf:
             - const: ethwarp_wocpu1
             - const: ethwarp_wocpu0
             - const: esw
-            - const: netsys0
-            - const: netsys1
-            - const: sgmii_tx250m
-            - const: sgmii_rx250m
-            - const: sgmii2_tx250m
-            - const: sgmii2_rx250m
-            - const: top_usxgmii0_sel
-            - const: top_usxgmii1_sel
-            - const: top_sgm0_sel
-            - const: top_sgm1_sel
-            - const: top_xfi_phy0_xtal_sel
-            - const: top_xfi_phy1_xtal_sel
             - const: top_eth_gmii_sel
             - const: top_eth_refck_50m_sel
             - const: top_eth_sys_200m_sel
@@ -375,16 +363,10 @@ allOf:
             - const: top_netsys_sync_250m_sel
             - const: top_netsys_ppefb_250m_sel
             - const: top_netsys_warp_sel
-            - const: wocpu1
-            - const: wocpu0
             - const: xgp1
             - const: xgp2
             - const: xgp3
 
-        mediatek,sgmiisys:
-          minItems: 2
-          maxItems: 2
-
 patternProperties:
   "^mac@[0-1]$":
     type: object
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
index 2bd3efff2485..215f14d1897d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -42,7 +42,7 @@ properties:
       - const: mgbe
       - const: mac
       - const: mac-divider
-      - const: ptp-ref
+      - const: ptp_ref
       - const: rx-input-m
       - const: rx-input
       - const: tx
@@ -133,7 +133,7 @@ examples:
                  <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
                  <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
                  <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
-        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+        clock-names = "mgbe", "mac", "mac-divider", "ptp_ref", "rx-input-m",
                       "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
                       "rx-pcs", "tx-pcs";
         resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index ddf9522a5dc2..5c2769dc689a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -394,6 +394,11 @@ properties:
               When a PFC frame is received with priorities matching the bitmask,
               the queue is blocked from transmitting for the pause time specified
               in the PFC frame.
+
+          snps,coe-unsupported:
+            type: boolean
+            description: TX checksum offload is unsupported by the TX queue.
+
         allOf:
           - if:
               required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
index 1d33d80af11c..f0d98c470585 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -34,6 +34,7 @@ properties:
       and length of the AXI DMA controller IO space, unless
       axistream-connected is specified, in which case the reg
       attribute of the node referenced by it is used.
+    minItems: 1
     maxItems: 2
 
   interrupts:
@@ -60,7 +61,7 @@ properties:
       - gmii
       - rgmii
       - sgmii
-      - 1000BaseX
+      - 1000base-x
 
   xlnx,phy-type:
     description:
@@ -165,7 +166,7 @@ examples:
         clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
         clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
         phy-mode = "mii";
-        reg = <0x00 0x40000000 0x00 0x40000>;
+        reg = <0x40000000 0x40000>;
         xlnx,rxcsum = <0x2>;
         xlnx,rxmem = <0x800>;
         xlnx,txcsum = <0x2>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index a9b822aeaa7e..e436650f0faf 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -14,9 +14,11 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-ocotp
-      - fsl,imx28-ocotp
+    items:
+      - enum:
+          - fsl,imx23-ocotp
+          - fsl,imx28-ocotp
+      - const: fsl,ocotp
 
   reg:
     maxItems: 1
@@ -34,7 +36,7 @@ unevaluatedProperties: false
 examples:
   - |
     ocotp: efuse@8002c000 {
-        compatible = "fsl,imx28-ocotp";
+        compatible = "fsl,imx28-ocotp", "fsl,ocotp";
         #address-cells = <1>;
         #size-cells = <1>;
         reg = <0x8002c000 0x2000>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
index a5bd90bc0712..9c3b8e65c42a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -36,13 +36,13 @@ properties:
 
   reg:
     items:
-      - description: External local bus interface registers
+      - description: Data Bus Interface registers
       - description: Meson designed configuration registers
       - description: PCIe configuration space
 
   reg-names:
     items:
-      - const: elbi
+      - const: dbi
       - const: cfg
       - const: config
 
@@ -113,7 +113,7 @@ examples:
     pcie: pcie@f9800000 {
         compatible = "amlogic,axg-pcie", "snps,dw-pcie";
         reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
-        reg-names = "elbi", "cfg", "config";
+        reg-names = "dbi", "cfg", "config";
         interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
         clocks = <&pclk>, <&clk_port>, <&clk_phy>;
         clock-names = "pclk", "port", "general";
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d70..835b6db00c27 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,18 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg
@@ -121,5 +133,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
index 531008f0b6ac..002b728cbc71 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -37,6 +37,7 @@ properties:
     description: This property is needed if using 24MHz OSC for RC's PHY.
 
   ep-gpios:
+    maxItems: 1
     description: pre-reset GPIO
 
   vpcie12v-supply:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709fea..bac4d0b51d8a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -58,8 +58,7 @@ properties:
   fsl,phy-tx-vboost-level-microvolt:
     description:
       Adjust the boosted transmit launch pk-pk differential amplitude
-    minimum: 880
-    maximum: 1120
+    enum: [844, 1008, 1156]
 
   fsl,phy-comp-dis-tune-percent:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index d981d77e82e4..a6244c33faf6 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -71,7 +71,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -130,6 +129,21 @@ allOf:
         clock-names:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,msm8998-qmp-ufs-phy
+    then:
+      properties:
+        power-domains:
+          false
+    else:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 9af203dc8793..fa7408eb7489 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -62,12 +62,12 @@ properties:
   "#clock-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   "#phy-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   orientation-switch:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
index 029569d5fcf3..24c733c10e0e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -32,6 +32,27 @@ properties:
 
   vdd3-supply: true
 
+  qcom,tune-usb2-disc-thres:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed disconnect threshold
+    minimum: 0
+    maximum: 7
+    default: 0
+
+  qcom,tune-usb2-amplitude:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed trasmit amplitude
+    minimum: 0
+    maximum: 15
+    default: 8
+
+  qcom,tune-usb2-preem:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed TX pre-emphasis tuning
+    minimum: 0
+    maximum: 7
+    default: 5
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 0f200e3f97a9..fce7f8a19e9c 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -15,9 +15,6 @@ description: |
 properties:
   compatible:
     oneOf:
-      - enum:
-          - qcom,sc8180x-usb-hs-phy
-          - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
               - qcom,sa8775p-usb-hs-phy
@@ -26,6 +23,7 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-usb-hs-phy
+              - qcom,sc8180x-usb-hs-phy
               - qcom,sdx55-usb-hs-phy
               - qcom,sdx65-usb-hs-phy
               - qcom,sm6375-usb-hs-phy
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
index 5ac994b3c0aa..b304bc5a08c4 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -57,11 +57,24 @@ required:
   - clocks
   - clock-names
   - '#phy-cells'
-  - power-domains
   - resets
   - reset-names
   - rockchip,grf
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-csi-dphy
+              - rockchip,rk1808-csi-dphy
+              - rockchip,rk3326-csi-dphy
+              - rockchip,rk3368-csi-dphy
+    then:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index bd72a326e6e0..60f30a59f385 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ linux-libre-6.6.139-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -97,7 +97,8 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
@@ -105,8 +106,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -123,10 +125,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_o