diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block linux-libre-6.6.50-gnu/Documentation/ABI/stable/sysfs-block
index 1fe9a553c37b..f0025d1c3d5a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block
+++ linux-libre-6.6.50-gnu/Documentation/ABI/stable/sysfs-block
@@ -101,6 +101,16 @@ Description:
 		devices that support receiving integrity metadata.
 
 
+What:		/sys/block/<disk>/partscan
+Date:		May 2024
+Contact:	Christoph Hellwig <hch@lst.de>
+Description:
+		The /sys/block/<disk>/partscan files reports if partition
+		scanning is enabled for the disk.  It returns "1" if partition
+		scanning is enabled, or "0" if not.  The value type is a 32-bit
+		unsigned integer, but only "0" and "1" are valid values.
+
+
 What:		/sys/block/<disk>/<partition>/alignment_offset
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b6..af31e5a22d89 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index 5e6b74f30406..1e7e0bb4c14e 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <nm@ti.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-led
index b2ff0012c0f2..2e24ac3bd7ef 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led
+++ linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-led
@@ -59,15 +59,6 @@ Description:
 		brightness. Reading this file when no hw brightness change
 		event has happened will return an ENODATA error.
 
-What:		/sys/class/leds/<led>/color
-Date:		June 2023
-KernelVersion:	6.5
-Description:
-		Color of the LED.
-
-		This is a read-only file. Reading this file returns the color
-		of the LED as a string (e.g: "red", "green", "multicolor").
-
 What:		/sys/class/leds/<led>/trigger
 Date:		March 2006
 KernelVersion:	2.6.17
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928a..5bff64d256c2 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361..53e508c6936a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 7ecd5c8161a6..657bdee28d84 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -519,6 +519,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
@@ -564,7 +565,8 @@ Description:	Control Symmetric Multi Threading (SMT)
 			 ================ =========================================
 
 			 If control status is "forceoff" or "notsupported" writes
-			 are rejected.
+			 are rejected. Note that enabling SMT on PowerPC skips
+			 offline cores.
 
 What:		/sys/devices/system/cpu/cpuX/power/energy_perf_bias
 Date:		March 2019
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-driver-qat
index ef6d6c57105e..96834d103a09 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat
+++ linux-libre-6.6.50-gnu/Documentation/ABI/testing/sysfs-driver-qat
@@ -29,6 +29,8 @@ Description:	(RW) Reports the current configuration of the QAT device.
 		  services
 		* asym;sym: identical to sym;asym
 		* dc: the device is configured for running compression services
+		* dcc: identical to dc but enables the dc chaining feature,
+		  hash then compression. If this is not required chose dc
 		* sym: the device is configured for running symmetric crypto
 		  services
 		* asym: the device is configured for running asymmetric crypto
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-obsolete.rst
index d095867899c5..594e697aa1b2 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-obsolete.rst
@@ -7,5 +7,5 @@ marked to be removed at some later point in time.
 The description of the interface will document the reason why it is
 obsolete and when it can be expected to be removed.
 
-.. kernel-abi:: $srctree/Documentation/ABI/obsolete
+.. kernel-abi:: ABI/obsolete
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-removed.rst
index f7e9e43023c1..f9e000c81828 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-removed.rst
@@ -1,5 +1,5 @@
 ABI removed symbols
 ===================
 
-.. kernel-abi:: $srctree/Documentation/ABI/removed
+.. kernel-abi:: ABI/removed
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-stable.rst
index 70490736e0d3..fc3361d847b1 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-stable.rst
@@ -10,5 +10,5 @@ for at least 2 years.
 Most interfaces (like syscalls) are expected to never change and always
 be available.
 
-.. kernel-abi:: $srctree/Documentation/ABI/stable
+.. kernel-abi:: ABI/stable
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-testing.rst
index b205b16a72d0..19767926b344 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/abi-testing.rst
@@ -16,5 +16,5 @@ Programs that use these interfaces are strongly encouraged to add their
 name to the description of these interfaces, so that the kernel
 developers can easily notify them if any changes occur.
 
-.. kernel-abi:: $srctree/Documentation/ABI/testing
+.. kernel-abi:: ABI/testing
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/cifs/usage.rst
index 5f936b4b6018..3de599cf0779 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -722,40 +722,26 @@ Configuration pseudo-files:
 ======================= =======================================================
 SecurityFlags		Flags which control security negotiation and
 			also packet signing. Authentication (may/must)
-			flags (e.g. for NTLM and/or NTLMv2) may be combined with
+			flags (e.g. for NTLMv2) may be combined with
 			the signing flags.  Specifying two different password
 			hashing mechanisms (as "must use") on the other hand
 			does not make much sense. Default flags are::
 
-				0x07007
-
-			(NTLM, NTLMv2 and packet signing allowed).  The maximum
-			allowable flags if you want to allow mounts to servers
-			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed).  Some
-			SecurityFlags require the corresponding menuconfig
-			options to be enabled.  Enabling plaintext
-			authentication currently requires also enabling
-			lanman authentication in the security flags
-			because the cifs module only supports sending
-			laintext passwords using the older lanman dialect
-			form of the session setup SMB.  (e.g. for authentication
-			using plain text passwords, set the SecurityFlags
-			to 0x30030)::
+				0x00C5
+
+			(NTLMv2 and packet signing allowed).  Some SecurityFlags
+			may require enabling a corresponding menuconfig option.
 
 			  may use packet signing			0x00001
 			  must use packet signing			0x01001
-			  may use NTLM (most common password hash)	0x00002
-			  must use NTLM					0x02002
 			  may use NTLMv2				0x00004
 			  must use NTLMv2				0x04004
-			  may use Kerberos security			0x00008
-			  must use Kerberos				0x08008
-			  may use lanman (weak) password hash		0x00010
-			  must use lanman password hash			0x10010
-			  may use plaintext passwords			0x00020
-			  must use plaintext passwords			0x20020
-			  (reserved for future packet encryption)	0x00040
+			  may use Kerberos security (krb5)		0x00008
+			  must use Kerberos                             0x08008
+			  may use NTLMSSP               		0x00080
+			  must use NTLMSSP           			0x80080
+			  seal (packet encryption)			0x00040
+			  must seal                                     0x40040
 
 cifsFYI			If set to non-zero value, additional debug information
 			will be logged to the system error log.  This field
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/features.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/features.rst
index 8c167082a84f..7651eca38227 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features
+.. kernel-feat:: features
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
index cf1eeefdfc32..a92e10ec402e 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -67,8 +67,8 @@ arg4:
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
-    userspace pointer to an unsigned long for storing the cookie returned by
-    ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
+    userspace pointer to an unsigned long long for storing the cookie returned
+    by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
 
 In order for a process to push a cookie to, or pull a cookie from a process, it
 is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/index.rst
index de99caabf65a..ff0b440ef2dc 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -21,3 +21,4 @@ are configurable at compile, boot or run time.
    cross-thread-rsb
    srso
    gather_data_sampling
+   reg-file-data-sampling
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 000000000000..0585d02b9a6c
--- /dev/null
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ATOM_GRACEMONT          06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index 32a8893e5617..e0a1be97fa75 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -138,11 +138,10 @@ associated with the source address of the indirect branch. Specifically,
 the BHB might be shared across privilege levels even in the presence of
 Enhanced IBRS.
 
-Currently the only known real-world BHB attack vector is via
-unprivileged eBPF. Therefore, it's highly recommended to not enable
-unprivileged eBPF, especially when eIBRS is used (without retpolines).
-For a full mitigation against BHB attacks, it's recommended to use
-retpolines (or eIBRS combined with retpolines).
+Previously the only known real-world BHB attack vector was via unprivileged
+eBPF. Further research has found attacks that don't require unprivileged eBPF.
+For a full mitigation against BHB attacks it is recommended to set BHI_DIS_S or
+use the BHB clearing sequence.
 
 Attack scenarios
 ----------------
@@ -430,6 +429,23 @@ The possible values in this file are:
   'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
   ===========================  =======================================================
 
+  - Branch History Injection (BHI) protection status:
+
+.. list-table::
+
+ * - BHI: Not affected
+   - System is not affected
+ * - BHI: Retpoline
+   - System is protected by retpoline
+ * - BHI: BHI_DIS_S
+   - System is protected by BHI_DIS_S
+ * - BHI: SW loop, KVM SW loop
+   - System is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -484,7 +500,11 @@ Spectre variant 2
 
    Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
    boot, by setting the IBRS bit, and they're automatically protected against
-   Spectre v2 variant attacks.
+   some Spectre v2 variant attacks. The BHB can still influence the choice of
+   indirect branch predictor entry, and although branch predictor entries are
+   isolated between modes when eIBRS is enabled, the BHB itself is not isolated
+   between modes. Systems which support BHI_DIS_S will set it to protect against
+   BHI attacks.
 
    On Intel's enhanced IBRS systems, this includes cross-thread branch target
    injections on SMT systems (STIBP). In other words, Intel eIBRS enables
@@ -638,6 +658,18 @@ kernel command line.
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+	spectre_bhi=
+
+		[X86] Control mitigation of Branch History Injection
+		(BHI) vulnerability.  This setting affects the deployment
+		of the HW BHI control and the SW BHB clearing sequence.
+
+		on
+			(default) Enable the HW or SW mitigation as
+			needed.
+		off
+			Disable the mitigation.
+
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 
 Mitigation selection guide
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/srso.rst
index b6cfb51cb0b4..e715bfc09879 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -46,12 +46,22 @@ The possible values in this file are:
 
    The processor is not vulnerable
 
- * 'Vulnerable: no microcode':
+* 'Vulnerable':
+
+   The processor is vulnerable and no mitigations have been applied.
+
+ * 'Vulnerable: No microcode':
 
    The processor is vulnerable, no microcode extending IBPB
    functionality to address the vulnerability has been applied.
 
- * 'Mitigation: microcode':
+ * 'Vulnerable: Safe RET, no microcode':
+
+   The "Safe RET" mitigation (see below) has been applied to protect the
+   kernel, but the IBPB-extending microcode has not been applied.  User
+   space tasks may still be vulnerable.
+
+ * 'Vulnerable: Microcode, no safe RET':
 
    Extended IBPB functionality microcode patch has been applied. It does
    not address User->Kernel and Guest->Host transitions protection but it
@@ -72,11 +82,11 @@ The possible values in this file are:
 
    (spec_rstack_overflow=microcode)
 
- * 'Mitigation: safe RET':
+ * 'Mitigation: Safe RET':
 
-   Software-only mitigation. It complements the extended IBPB microcode
-   patch functionality by addressing User->Kernel and Guest->Host
-   transitions protection.
+   Combined microcode/software mitigation. It complements the
+   extended IBPB microcode patch functionality by addressing
+   User->Kernel and Guest->Host transitions protection.
 
    Selected by default or by spec_rstack_overflow=safe-ret
 
@@ -129,7 +139,7 @@ an indrect branch prediction barrier after having applied the required
 microcode patch for one's system. This mitigation comes also at
 a performance cost.
 
-Mitigation: safe RET
+Mitigation: Safe RET
 --------------------
 
 The mitigation works by ensuring all RET instructions speculate to
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 599e8d3bcbc3..9235cf4fbabf 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -172,7 +172,7 @@ variables.
 Offset of the free_list's member. This value is used to compute the number
 of free pages.
 
-Each zone has a free_area structure array called free_area[MAX_ORDER + 1].
+Each zone has a free_area structure array called free_area[NR_PAGE_ORDERS].
 The free_list represents a linked list of free page blocks.
 
 (list_head, next|prev)
@@ -189,8 +189,8 @@ Offsets of the vmap_area's members. They carry vmalloc-specific
 information. Makedumpfile gets the start address of the vmalloc region
 from this.
 
-(zone.free_area, MAX_ORDER + 1)
--------------------------------
+(zone.free_area, NR_PAGE_ORDERS)
+--------------------------------
 
 Free areas descriptor. User-space tools use this value to iterate the
 free_area ranges. MAX_ORDER is used by the zone buddy allocator.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.6.50-gnu/Documentation/admin-guide/kernel-parameters.txt
index 0a1731a0f0ef..a7fe11389736 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -664,12 +664,6 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clocksource.max_cswd_read_retries= [KNL]
-			Number of clocksource_watchdog() retries due to
-			external delays before the clock will be marked
-			unstable.  Defaults to two retries, that is,
-			three attempts to read the clock under test.
-
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
 			marked with CLOCK_SOURCE_VERIFY_PERCPU that
@@ -1133,6 +1127,26 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
+	reg_file_data_sampling=
+			[X86] Controls mitigation for Register File Data
+			Sampling (RFDS) vulnerability. RFDS is a CPU
+			vulnerability which may allow userspace to infer
+			kernel data values previously stored in floating point
+			registers, vector registers, or integer registers.
+			RFDS only affects Intel Atom processors.
+
+			on:	Turns ON the mitigation.
+			off:	Turns OFF the mitigation.
+
+			This parameter overrides the compile time default set
+			by CONFIG_MITIGATION_RFDS. Mitigation cannot be
+			disabled when other VERW based mitigations (like MDS)
+			are enabled. In order to disable RFDS mitigation all
+			VERW based mitigations need to be disabled.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
+
 	driver_async_probe=  [KNL]
 			List of driver names to be probed asynchronously. *
 			matches with all driver names. If * is specified, the
@@ -3249,9 +3263,7 @@
 
 	mem_encrypt=	[X86-64] AMD Secure Memory Encryption (SME) control
 			Valid arguments: on, off
-			Default (depends on kernel configuration option):
-			  on  (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y)
-			  off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n)
+			Default: off
 			mem_encrypt=on:		Activate SME
 			mem_encrypt=off:	Do not activate SME
 
@@ -3305,6 +3317,9 @@
 			arch-independent options, each of which is an
 			aggregation of existing arch-specific options.
 
+			Note, "mitigations" is supported if and only if the
+			kernel was built with CPU_MITIGATIONS=y.
+
 			off
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
@@ -3322,8 +3337,10 @@
 					       nospectre_bhb [ARM64]
 					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
+					       reg_file_data_sampling=off [X86]
 					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
 					       spectre_v2_user=off [X86]
 					       srbds=off [X86,INTEL]
 					       ssbd=force-off [ARM64]
@@ -4632,11 +4649,9 @@
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [<profiletype>,]<number>
-			Param: <profiletype>: "schedule", "sleep", or "kvm"
+			Param: <profiletype>: "schedule" or "kvm"
 				[defaults to kernel profiling]
 			Param: "schedule" - profile schedule points.
-			Param: "sleep" - profile D-state sleeping (millisecs).
-				Requires CONFIG_SCHEDSTATS
 			Param: "kvm" - profile VM exits.
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.
@@ -5858,6 +5873,13 @@
 			This feature may be more efficiently disabled
 			using the csdlock_debug- kernel parameter.
 
+	smp.panic_on_ipistall= [KNL]
+			If a csd_lock_timeout extends for more than
+			the specified number of milliseconds, panic the
+			system.  By default, let CSD-lock acquisition
+			take as long as they take.  Specifying 300,000
+			for this value provides a 5-minute timeout.
+
 	smsc-ircc2.nopnp	[HW] Don't use PNP to discover SMC devices
 	smsc-ircc2.ircc_cfg=	[HW] Device configuration I/O port
 	smsc-ircc2.ircc_sir=	[HW] SIR base I/O port
@@ -5894,6 +5916,15 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/admin-guide/laptops/sonypi.rst
 
+	spectre_bhi=	[X86] Control mitigation of Branch History Injection
+			(BHI) vulnerability.  This setting affects the
+			deployment of the HW BHI control and the SW BHB
+			clearing sequence.
+
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
+
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
 			The default operation protects the kernel from
@@ -6817,6 +6848,9 @@
 					pause after every control message);
 				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
 					delay after resetting its port);
+				p = USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT
+					(Reduce timeout of the SET_ADDRESS
+					request from 5000 ms to 500 ms);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/mm/damon/usage.rst
index 8da1b7281827..9285f69f4f73 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/mm/damon/usage.rst
@@ -389,7 +389,7 @@ pages of all memory cgroups except ``/having_care_already``.::
     # # further filter out all cgroups except one at '/having_care_already'
     echo memcg > 1/type
     echo /having_care_already > 1/memcg_path
-    echo N > 1/matching
+    echo Y > 1/matching
 
 Note that ``anon`` and ``memcg`` filters are currently supported only when
 ``paddr`` `implementation <sysfs_contexts>` is being used.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-6.6.50-gnu/Documentation/admin-guide/sysctl/net.rst
index 4877563241f3..5f1748f33d9a 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-6.6.50-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -205,6 +205,11 @@ Will increase power usage.
 
 Default: 0 (off)
 
+mem_pcpu_rsv
+------------
+
+Per-cpu reserved forward alloc cache size in page units. Default 1MB per CPU.
+
 rmem_default
 ------------
 
diff --git linux-libre-6.6-gnu/Documentation/arch/arc/features.rst linux-libre-6.6.50-gnu/Documentation/arch/arc/features.rst
index b793583d688a..49ff446ff744 100644
--- linux-libre-6.6-gnu/Documentation/arch/arc/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/arc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arc
+.. kernel-feat:: features arc
diff --git linux-libre-6.6-gnu/Documentation/arch/arm/features.rst linux-libre-6.6.50-gnu/Documentation/arch/arm/features.rst
index 7414ec03dd15..0e76aaf68eca 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/arm/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm
+.. kernel-feat:: features arm
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst linux-libre-6.6.50-gnu/Documentation/arch/arm64/features.rst
index dfa4cb3cd3ef..03321f4309d0 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/arm64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm64
+.. kernel-feat:: features arm64
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.6.50-gnu/Documentation/arch/arm64/silicon-errata.rst
index f47f63bcf67c..357d6cb98161 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -71,6 +71,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #3117295        | ARM64_ERRATUM_3117295       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A520     | #2966298        | ARM64_ERRATUM_2966298       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
@@ -117,32 +119,68 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-600         | #1076982,1209401| N/A                         |
@@ -233,3 +271,10 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ASR            | ASR8601         | #8601001        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst linux-libre-6.6.50-gnu/Documentation/arch/ia64/features.rst
index d7226fdcf5f8..056838d2ab55 100644
--- linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/ia64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features ia64
+.. kernel-feat:: features ia64
diff --git linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst linux-libre-6.6.50-gnu/Documentation/arch/loongarch/features.rst
index ebacade3ea45..009f44c7951f 100644
--- linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/loongarch/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst linux-libre-6.6.50-gnu/Documentation/arch/m68k/features.rst
index 5107a2119472..de7f0ccf7fc8 100644
--- linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/m68k/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features m68k
+.. kernel-feat:: features m68k
diff --git linux-libre-6.6-gnu/Documentation/arch/mips/features.rst linux-libre-6.6.50-gnu/Documentation/arch/mips/features.rst
index 1973d729b29a..6e0ffe3e7354 100644
--- linux-libre-6.6-gnu/Documentation/arch/mips/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/mips/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst linux-libre-6.6.50-gnu/Documentation/arch/nios2/features.rst
index 8449e63f69b2..89913810ccb5 100644
--- linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/nios2/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features nios2
+.. kernel-feat:: features nios2
diff --git linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst linux-libre-6.6.50-gnu/Documentation/arch/openrisc/features.rst
index 3f7c40d219f2..bae2e25adfd6 100644
--- linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/openrisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features openrisc
+.. kernel-feat:: features openrisc
diff --git linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst linux-libre-6.6.50-gnu/Documentation/arch/parisc/features.rst
index 501d7c450037..b3aa4d243b93 100644
--- linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/parisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features parisc
+.. kernel-feat:: features parisc
diff --git linux-libre-6.6-gnu/Documentation/arch/s390/features.rst linux-libre-6.6.50-gnu/Documentation/arch/s390/features.rst
index 57c296a9d8f3..2883dc950681 100644
--- linux-libre-6.6-gnu/Documentation/arch/s390/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/s390/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features s390
+.. kernel-feat:: features s390
diff --git linux-libre-6.6-gnu/Documentation/arch/sh/features.rst linux-libre-6.6.50-gnu/Documentation/arch/sh/features.rst
index f722af3b6c99..fae48fe81e9b 100644
--- linux-libre-6.6-gnu/Documentation/arch/sh/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/sh/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sh
+.. kernel-feat:: features sh
diff --git linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst linux-libre-6.6.50-gnu/Documentation/arch/sparc/features.rst
index c0c92468b0fe..96835b6d598a 100644
--- linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/sparc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sparc
+.. kernel-feat:: features sparc
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst linux-libre-6.6.50-gnu/Documentation/arch/x86/amd-memory-encryption.rst
index 934310ce7258..bace87cc9ca2 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/x86/amd-memory-encryption.rst
@@ -87,14 +87,14 @@ The state of SME in the Linux kernel can be documented as follows:
 	  kernel is non-zero).
 
 SME can also be enabled and activated in the BIOS. If SME is enabled and
-activated in the BIOS, then all memory accesses will be encrypted and it will
-not be necessary to activate the Linux memory encryption support.  If the BIOS
-merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate
-memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or
-by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
-not enable SME, then Linux will not be able to activate memory encryption, even
-if configured to do so by default or the mem_encrypt=on command line parameter
-is specified.
+activated in the BIOS, then all memory accesses will be encrypted and it
+will not be necessary to activate the Linux memory encryption support.
+
+If the BIOS merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG),
+then memory encryption can be enabled by supplying mem_encrypt=on on the
+kernel command line.  However, if BIOS does not enable SME, then Linux
+will not be able to activate memory encryption, even if configured to do
+so by default or the mem_encrypt=on command line parameter is specified.
 
 Secure Nested Paging (SNP)
 ==========================
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/features.rst linux-libre-6.6.50-gnu/Documentation/arch/x86/features.rst
index b663f15053ce..a33616346a38 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/x86/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features x86
+.. kernel-feat:: features x86
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst linux-libre-6.6.50-gnu/Documentation/arch/x86/mds.rst
index e73fdff62c0a..c58c72362911 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/x86/mds.rst
@@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing:
 
     mds_clear_cpu_buffers()
 
+Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
+Other than CFLAGS.ZF, this macro doesn't clobber any registers.
+
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
 
@@ -138,17 +141,30 @@ Mitigation points
 
    When transitioning from kernel to user space the CPU buffers are flushed
    on affected CPUs when the mitigation is not disabled on the kernel
-   command line. The migitation is enabled through the static key
-   mds_user_clear.
-
-   The mitigation is invoked in prepare_exit_to_usermode() which covers
-   all but one of the kernel to user space transitions.  The exception
-   is when we return from a Non Maskable Interrupt (NMI), which is
-   handled directly in do_nmi().
-
-   (The reason that NMI is special is that prepare_exit_to_usermode() can
-    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
-    enable IRQs with NMIs blocked.)
+   command line. The mitigation is enabled through the feature flag
+   X86_FEATURE_CLEAR_CPU_BUF.
+
+   The mitigation is invoked just before transitioning to userspace after
+   user registers are restored. This is done to minimize the window in
+   which kernel data could be accessed after VERW e.g. via an NMI after
+   VERW.
+
+   **Corner case not handled**
+   Interrupts returning to kernel don't clear CPUs buffers since the
+   exit-to-user path is expected to do that anyways. But, there could be
+   a case when an NMI is generated in kernel after the exit-to-user path
+   has cleared the buffers. This case is not handled and NMI returning to
+   kernel don't clear CPU buffers because:
+
+   1. It is rare to get an NMI after VERW, but before returning to userspace.
+   2. For an unprivileged user, there is no known way to make that NMI
+      less rare or target it.
+   3. It would take a large number of these precisely-timed NMIs to mount
+      an actual attack.  There's presumably not enough bandwidth.
+   4. The NMI in question occurs after a VERW, i.e. when user state is
+      restored and most interesting data is already scrubbed. Whats left
+      is only the data that NMI touches, and that may or may not be of
+      any interest.
 
 
 2. C-State transition
diff --git linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst linux-libre-6.6.50-gnu/Documentation/arch/xtensa/features.rst
index 6b92c7bfa19d..28dcce1759be 100644
--- linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/arch/xtensa/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features xtensa
+.. kernel-feat:: features xtensa
diff --git linux-libre-6.6-gnu/Documentation/bpf/map_lpm_trie.rst linux-libre-6.6.50-gnu/Documentation/bpf/map_lpm_trie.rst
index 74d64a30f500..f9cd579496c9 100644
--- linux-libre-6.6-gnu/Documentation/bpf/map_lpm_trie.rst
+++ linux-libre-6.6.50-gnu/Documentation/bpf/map_lpm_trie.rst
@@ -17,7 +17,7 @@ significant byte.
 
 LPM tries may be created with a maximum prefix length that is a multiple
 of 8, in the range from 8 to 2048. The key used for lookup and update
-operations is a ``struct bpf_lpm_trie_key``, extended by
+operations is a ``struct bpf_lpm_trie_key_u8``, extended by
 ``max_prefixlen/8`` bytes.
 
 - For IPv4 addresses the data length is 4 bytes
diff --git linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst linux-libre-6.6.50-gnu/Documentation/cdrom/cdrom-standard.rst
index 7964fe134277..6c1303cff159 100644
--- linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst
+++ linux-libre-6.6.50-gnu/Documentation/cdrom/cdrom-standard.rst
@@ -217,7 +217,7 @@ current *struct* is::
 		int (*media_changed)(struct cdrom_device_info *, int);
 		int (*tray_move)(struct cdrom_device_info *, int);
 		int (*lock_door)(struct cdrom_device_info *, int);
-		int (*select_speed)(struct cdrom_device_info *, int);
+		int (*select_speed)(struct cdrom_device_info *, unsigned long);
 		int (*get_last_session) (struct cdrom_device_info *,
 					 struct cdrom_multisession *);
 		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
 
 ::
 
-	int select_speed(struct cdrom_device_info *cdi, int speed)
+	int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
 
 Some CD-ROM drives are capable of changing their head-speed. There
 are several reasons for changing the speed of a CD-ROM drive. Badly
diff --git linux-libre-6.6-gnu/Documentation/conf.py linux-libre-6.6.50-gnu/Documentation/conf.py
index d4fdf6a3875a..e385e24fe9e7 100644
--- linux-libre-6.6-gnu/Documentation/conf.py
+++ linux-libre-6.6.50-gnu/Documentation/conf.py
@@ -345,9 +345,9 @@ sys.stderr.write("Using %s theme\n" % html_theme)
 html_static_path = ['sphinx-static']
 
 # If true, Docutils "smart quotes" will be used to convert quotes and dashes
-# to typographically correct entities.  This will convert "--" to "—",
-# which is not always what we want, so disable it.
-smartquotes = False
+# to typographically correct entities.  However, conversion of "--" to "—"
+# is not always what we want, so enable only quotes.
+smartquotes_action = 'q'
 
 # Custom sidebar templates, maps document names to template names.
 # Note that the RTD theme ignores this
@@ -383,6 +383,12 @@ latex_elements = {
         verbatimhintsturnover=false,
     ''',
 
+    #
+    # Some of our authors are fond of deep nesting; tell latex to
+    # cope.
+    #
+    'maxlistdepth': '10',
+
     # For CJK One-half spacing, need to be in front of hyperref
     'extrapackages': r'\usepackage{setspace}',
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index adbfaea32343..90f31beb80c2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -136,7 +136,7 @@ description: |
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
   OS. These devices do not use the scheme described above. For details, see:
-  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
   $nodename:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 0999ea07f47b..e4576546bf0d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 437db0c62339..e1b4b910044b 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -47,8 +47,8 @@ properties:
       - 3
 
   dma-channels:
-    minItems: 1
-    maxItems: 64
+    minimum: 1
+    maximum: 64
 
   clocks:
     minItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index c1060e5fcef3..d3d8a2e143ed 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -126,7 +126,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        gpio@e000a000 {
+        gpio@a0020000 {
             compatible = "xlnx,xps-gpio-1.00.a";
             reg = <0xa0020000 0x10000>;
             #gpio-cells = <2>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3ec399..c22e459c175a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -75,7 +75,7 @@ required:
   - clocks
 
 allOf:
-  - $ref: i2c-controller.yaml
+  - $ref: /schemas/i2c/i2c-controller.yaml#
   - if:
       properties:
         compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index ab151c9db219..580003cdfff5 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -21,7 +21,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 9996dd93f84b..e1f450b80db2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -28,6 +28,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -39,12 +42,16 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
+  - clocks
 
 additionalProperties: false
 
@@ -55,7 +62,7 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        clocks = <&axi_clk>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
index c13c10c8d65d..eed0df9d3a23 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
index 509d20c091af..6a206111d4e0 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -62,6 +62,9 @@ properties:
         - description: MPM pin number
         - description: GIC SPI number for the MPM pin
 
+  '#power-domain-cells':
+    const: 0
+
 required:
   - compatible
   - reg
@@ -93,4 +96,5 @@ examples:
                            <86 183>,
                            <90 260>,
                            <91 260>;
+        #power-domain-cells = <0>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index cf456f8d9ddc..c87677f5e2a2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -37,15 +37,15 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
@@ -59,9 +59,9 @@ required:
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,9 +82,9 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
index 7032c7e15039..3e128733ef53 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -61,6 +61,9 @@ properties:
       - description: used for 1st data pipe from RDMA
       - description: used for 2nd data pipe from RDMA
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -70,6 +73,7 @@ required:
   - clocks
   - iommus
   - mboxes
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -80,16 +84,17 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_rdma0: mdp3-rdma0@14001000 {
-      compatible = "mediatek,mt8183-mdp3-rdma";
-      reg = <0x14001000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
-                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-               <&mmsys CLK_MM_MDP_RSZ1>;
-      iommus = <&iommu>;
-      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
-               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
index 0baa77198fa2..64ea98aa0592 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -50,6 +50,9 @@ properties:
   iommus:
     maxItems: 1
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +61,7 @@ required:
   - power-domains
   - clocks
   - iommus
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -68,13 +72,14 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_wrot0: mdp3-wrot0@14005000 {
-      compatible = "mediatek,mt8183-mdp3-wrot";
-      reg = <0x14005000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
-                            <CMDQ_EVENT_MDP_WROT0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_WROT0>;
-      iommus = <&iommu>;
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index e466dff8286d..afcaa427d48b 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -90,15 +90,16 @@ properties:
         description: connection point for input on the parallel interface
 
         properties:
-          bus-type:
-            enum: [5, 6]
-
           endpoint:
             $ref: video-interfaces.yaml#
             unevaluatedProperties: false
 
-        required:
-          - bus-type
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
 
     anyOf:
       - required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
index 294693a8906c..10540aa7afa1 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -22,8 +22,9 @@ compatible:
 	"mediatek,mt6323" for PMIC MT6323
 	"mediatek,mt6331" for PMIC MT6331 and MT6332
 	"mediatek,mt6357" for PMIC MT6357
-	"mediatek,mt6358" for PMIC MT6358 and MT6366
+	"mediatek,mt6358" for PMIC MT6358
 	"mediatek,mt6359" for PMIC MT6359
+	"mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366
 	"mediatek,mt6397" for PMIC MT6397
 
 Optional subnodes:
@@ -40,6 +41,7 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-regulator"
 	see ../regulator/mt6323-regulator.txt
 		- compatible: "mediatek,mt6358-regulator"
+		- compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator"
 	see ../regulator/mt6358-regulator.txt
 		- compatible: "mediatek,mt6397-regulator"
 	see ../regulator/mt6397-regulator.txt
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
index e74502a0afe8..3202dc7967c5 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -337,8 +337,8 @@ allOf:
           minItems: 4
 
         clocks:
-          minItems: 34
-          maxItems: 34
+          minItems: 24
+          maxItems: 24
 
         clock-names:
           items:
@@ -351,18 +351,6 @@ allOf:
             - const: ethwarp_wocpu1
             - const: ethwarp_wocpu0
             - const: esw
-            - const: netsys0
-            - const: netsys1
-            - const: sgmii_tx250m
-            - const: sgmii_rx250m
-            - const: sgmii2_tx250m
-            - const: sgmii2_rx250m
-            - const: top_usxgmii0_sel
-            - const: top_usxgmii1_sel
-            - const: top_sgm0_sel
-            - const: top_sgm1_sel
-            - const: top_xfi_phy0_xtal_sel
-            - const: top_xfi_phy1_xtal_sel
             - const: top_eth_gmii_sel
             - const: top_eth_refck_50m_sel
             - const: top_eth_sys_200m_sel
@@ -375,16 +363,10 @@ allOf:
             - const: top_netsys_sync_250m_sel
             - const: top_netsys_ppefb_250m_sel
             - const: top_netsys_warp_sel
-            - const: wocpu1
-            - const: wocpu0
             - const: xgp1
             - const: xgp2
             - const: xgp3
 
-        mediatek,sgmiisys:
-          minItems: 2
-          maxItems: 2
-
 patternProperties:
   "^mac@[0-1]$":
     type: object
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index ddf9522a5dc2..5c2769dc689a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -394,6 +394,11 @@ properties:
               When a PFC frame is received with priorities matching the bitmask,
               the queue is blocked from transmitting for the pause time specified
               in the PFC frame.
+
+          snps,coe-unsupported:
+            type: boolean
+            description: TX checksum offload is unsupported by the TX queue.
+
         allOf:
           - if:
               required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index a9b822aeaa7e..e436650f0faf 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -14,9 +14,11 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-ocotp
-      - fsl,imx28-ocotp
+    items:
+      - enum:
+          - fsl,imx23-ocotp
+          - fsl,imx28-ocotp
+      - const: fsl,ocotp
 
   reg:
     maxItems: 1
@@ -34,7 +36,7 @@ unevaluatedProperties: false
 examples:
   - |
     ocotp: efuse@8002c000 {
-        compatible = "fsl,imx28-ocotp";
+        compatible = "fsl,imx28-ocotp", "fsl,ocotp";
         #address-cells = <1>;
         #size-cells = <1>;
         reg = <0x8002c000 0x2000>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d70..835b6db00c27 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,18 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg
@@ -121,5 +133,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
index 531008f0b6ac..002b728cbc71 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -37,6 +37,7 @@ properties:
     description: This property is needed if using 24MHz OSC for RC's PHY.
 
   ep-gpios:
+    maxItems: 1
     description: pre-reset GPIO
 
   vpcie12v-supply:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index d981d77e82e4..a6244c33faf6 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -71,7 +71,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -130,6 +129,21 @@ allOf:
         clock-names:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,msm8998-qmp-ufs-phy
+    then:
+      properties:
+        power-domains:
+          false
+    else:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 9af203dc8793..fa7408eb7489 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -62,12 +62,12 @@ properties:
   "#clock-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   "#phy-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   orientation-switch:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
index 029569d5fcf3..24c733c10e0e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -32,6 +32,27 @@ properties:
 
   vdd3-supply: true
 
+  qcom,tune-usb2-disc-thres:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed disconnect threshold
+    minimum: 0
+    maximum: 7
+    default: 0
+
+  qcom,tune-usb2-amplitude:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed trasmit amplitude
+    minimum: 0
+    maximum: 15
+    default: 8
+
+  qcom,tune-usb2-preem:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed TX pre-emphasis tuning
+    minimum: 0
+    maximum: 7
+    default: 5
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 0f200e3f97a9..fce7f8a19e9c 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -15,9 +15,6 @@ description: |
 properties:
   compatible:
     oneOf:
-      - enum:
-          - qcom,sc8180x-usb-hs-phy
-          - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
               - qcom,sa8775p-usb-hs-phy
@@ -26,6 +23,7 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-usb-hs-phy
+              - qcom,sc8180x-usb-hs-phy
               - qcom,sdx55-usb-hs-phy
               - qcom,sdx65-usb-hs-phy
               - qcom,sm6375-usb-hs-phy
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index bd72a326e6e0..60f30a59f385 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -97,7 +97,8 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
@@ -105,8 +106,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -123,10 +125,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
-                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
-                         i2s4_out_data]
+                  items:
+                    enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                           i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                           i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                           i2s4_out_data]
           - if:
               properties:
                 function:
@@ -159,10 +162,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
-                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
-                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
-                         pcie_wake, pcie_clkreq]
+                  items:
+                    enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                           pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                           pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                           pcie_wake, pcie_clkreq]
           - if:
               properties:
                 function:
@@ -178,11 +182,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
-                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
-                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
-                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
-                         pwm_ch7_0, pwm_0, pwm_1]
+                  items:
+                    enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                           pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                           pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                           pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                           pwm_ch7_0, pwm_0, pwm_1]
           - if:
               properties:
                 function:
@@ -260,33 +265,34 @@ patternProperties:
           pins:
             description:
               An array of strings. Each string contains the name of a pin.
-            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
-                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
-                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
-                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
-                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
-                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
-                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
-                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
-                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
-                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
-                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
-                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
-                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
-                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
-                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
-                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
-                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
-                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
-                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
-                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
-                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
-                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
-                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
-                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
-                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
-                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
-                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+            items:
+              enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                     RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                     I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                     I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                     G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                     G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                     NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                     MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                     MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                     MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                     MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                     PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                     GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                     PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                     AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                     PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                     WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                     WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                     EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                     EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                     WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                     UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                     UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                     PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                     GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                     TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                     WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 
           bias-disable: true
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
index 303a443d9e29..9418fd66a8e9 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -29,6 +29,10 @@ properties:
           default: 0
           maximum: 100
 
+  rs485-rts-active-high:
+    description: drive RTS high when sending (this is the default).
+    $ref: /schemas/types.yaml#/definitions/flag
+
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
     $ref: /schemas/types.yaml#/definitions/flag
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/serial.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/serial/serial.yaml
index ea277560a596..5727bd549dec 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/serial.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/serial/serial.yaml
@@ -96,7 +96,7 @@ then:
     rts-gpios: false
 
 patternProperties:
-  "^bluetooth|gnss|gps|mcu$":
+  "^(bluetooth|gnss|gps|mcu)$":
     if:
       type: object
     then:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index e4fa6a07b4fa..be6ffec2b074 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -163,6 +163,7 @@ allOf:
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/rt5645.txt linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1f..c1fa379f5f3e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
index f882903769f9..eee7c8d4cf4a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -14,7 +14,7 @@ description: |
   It is a MIPI System Power Management (SPMI) controller.
 
   The PMIC part is provided by
-  ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
 
 allOf:
   - $ref: spmi.yaml#
@@ -48,7 +48,7 @@ patternProperties:
       PMIC properties, which are specific to the used SPMI PMIC device(s).
       When used in combination with HiSilicon 6421v600, the properties
       are documented at
-      drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+      Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
index 7538469997f9..ca81c8afba79 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -10,28 +10,55 @@ maintainers:
   - zhanghongchen <zhanghongchen@loongson.cn>
   - Yinbo Zhu <zhuyinbo@loongson.cn>
 
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
       - enum:
           - loongson,ls2k1000-thermal
+          - loongson,ls2k2000-thermal
       - items:
           - enum:
-              - loongson,ls2k2000-thermal
+              - loongson,ls2k0500-thermal
           - const: loongson,ls2k1000-thermal
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
 
+  '#thermal-sensor-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - interrupts
+  - '#thermal-sensor-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - loongson,ls2k2000-thermal
+
+then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 2
+
+else:
+  properties:
+    reg:
+      maxItems: 1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -41,4 +68,5 @@ examples:
         reg = <0x1fe01500 0x30>;
         interrupt-parent = <&liointc0>;
         interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+        #thermal-sensor-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 4f3acdc4dec0..98cdd98212c4 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
index bffdab0b0185..fbac40b958dd 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
@@ -169,27 +169,27 @@ properties:
       - const: tgib0
       - const: tgic0
       - const: tgid0
-      - const: tgiv0
+      - const: tciv0
       - const: tgie0
       - const: tgif0
       - const: tgia1
       - const: tgib1
-      - const: tgiv1
-      - const: tgiu1
+      - const: tciv1
+      - const: tciu1
       - const: tgia2
       - const: tgib2
-      - const: tgiv2
-      - const: tgiu2
+      - const: tciv2
+      - const: tciu2
       - const: tgia3
       - const: tgib3
       - const: tgic3
       - const: tgid3
-      - const: tgiv3
+      - const: tciv3
       - const: tgia4
       - const: tgib4
       - const: tgic4
       - const: tgid4
-      - const: tgiv4
+      - const: tciv4
       - const: tgiu5
       - const: tgiv5
       - const: tgiw5
@@ -197,18 +197,18 @@ properties:
       - const: tgib6
       - const: tgic6
       - const: tgid6
-      - const: tgiv6
+      - const: tciv6
       - const: tgia7
       - const: tgib7
       - const: tgic7
       - const: tgid7
-      - const: tgiv7
+      - const: tciv7
       - const: tgia8
       - const: tgib8
       - const: tgic8
       - const: tgid8
-      - const: tgiv8
-      - const: tgiu8
+      - const: tciv8
+      - const: tciu8
 
   clocks:
     maxItems: 1
@@ -285,16 +285,16 @@ examples:
                    <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
                    <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
                    <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
-      interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0",
+      interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0",
                         "tgif0",
-                        "tgia1", "tgib1", "tgiv1", "tgiu1",
-                        "tgia2", "tgib2", "tgiv2", "tgiu2",
-                        "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3",
-                        "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4",
+                        "tgia1", "tgib1", "tciv1", "tciu1",
+                        "tgia2", "tgib2", "tciv2", "tciu2",
+                        "tgia3", "tgib3", "tgic3", "tgid3", "tciv3",
+                        "tgia4", "tgib4", "tgic4", "tgid4", "tciv4",
                         "tgiu5", "tgiv5", "tgiw5",
-                        "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6",
-                        "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7",
-                        "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8";
+                        "tgia6", "tgib6", "tgic6", "tgid6", "tciv6",
+                        "tgia7", "tgib7", "tgic7", "tgid7", "tciv7",
+                        "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8";
       clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
       power-domains = <&cpg>;
       resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
index ff3a1707ef57..6d4cfd943f58 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
+++ linux-libre-6.6.50-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -36,7 +36,11 @@ properties:
 
   vdd-supply:
     description:
-      VDD power supply to the hub
+      3V3 power supply to the hub
+
+  vdd2-supply:
+    description:
+      1V2 power supply to the hub
 
   peer-hub:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -62,6 +66,7 @@ allOf:
       properties:
         reset-gpios: false
         vdd-supply: false
+        vdd2-supply: false
         peer-hub: false
         i2c-bus: false
     else:
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-bridge.rst linux-libre-6.6.50-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
index 604208534095..833f68fb0700 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
+++ linux-libre-6.6.50-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
@@ -6,9 +6,12 @@ API to implement a new FPGA bridge
 
 * struct fpga_bridge - The FPGA Bridge structure
 * struct fpga_bridge_ops - Low level Bridge driver ops
-* fpga_bridge_register() - Create and register a bridge
+* __fpga_bridge_register() - Create and register a bridge
 * fpga_bridge_unregister() - Unregister a bridge
 
+The helper macro ``fpga_bridge_register()`` automatically sets
+the module that registers the FPGA bridge as the owner.
+
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge
 
@@ -16,7 +19,7 @@ API to implement a new FPGA bridge
    :functions: fpga_bridge_ops
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
-   :functions: fpga_bridge_register
+   :functions: __fpga_bridge_register
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
    :functions: fpga_bridge_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-mgr.rst linux-libre-6.6.50-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
index 49c0a9512653..8d2b79f696c1 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
+++ linux-libre-6.6.50-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -24,7 +24,8 @@ How to support a new FPGA device
 --------------------------------
 
 To add another FPGA manager, write a driver that implements a set of ops.  The
-probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
+probe function calls ``fpga_mgr_register()`` or ``fpga_mgr_register_full()``,
+such as::
 
 	static const struct fpga_manager_ops socfpga_fpga_ops = {
 		.write_init = socfpga_fpga_ops_configure_init,
@@ -69,10 +70,11 @@ probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
 	}
 
 Alternatively, the probe function could call one of the resource managed
-register functions, devm_fpga_mgr_register() or devm_fpga_mgr_register_full().
-When these functions are used, the parameter syntax is the same, but the call
-to fpga_mgr_unregister() should be removed. In the above example, the
-socfpga_fpga_remove() function would not be required.
+register functions, ``devm_fpga_mgr_register()`` or
+``devm_fpga_mgr_register_full()``.  When these functions are used, the
+parameter syntax is the same, but the call to ``fpga_mgr_unregister()`` should be
+removed. In the above example, the ``socfpga_fpga_remove()`` function would not be
+required.
 
 The ops will implement whatever device specific register writes are needed to
 do the programming sequence for this particular FPGA.  These ops return 0 for
@@ -125,15 +127,19 @@ API for implementing a new FPGA Manager driver
 * struct fpga_manager -  the FPGA manager struct
 * struct fpga_manager_ops -  Low level FPGA manager driver ops
 * struct fpga_manager_info -  Parameter structure for fpga_mgr_register_full()
-* fpga_mgr_register_full() -  Create and register an FPGA manager using the
+* __fpga_mgr_register_full() -  Create and register an FPGA manager using the
   fpga_mgr_info structure to provide the full flexibility of options
-* fpga_mgr_register() -  Create and register an FPGA manager using standard
+* __fpga_mgr_register() -  Create and register an FPGA manager using standard
   arguments
-* devm_fpga_mgr_register_full() -  Resource managed version of
-  fpga_mgr_register_full()
-* devm_fpga_mgr_register() -  Resource managed version of fpga_mgr_register()
+* __devm_fpga_mgr_register_full() -  Resource managed version of
+  __fpga_mgr_register_full()
+* __devm_fpga_mgr_register() -  Resource managed version of __fpga_mgr_register()
 * fpga_mgr_unregister() -  Unregister an FPGA manager
 
+Helper macros ``fpga_mgr_register_full()``, ``fpga_mgr_register()``,
+``devm_fpga_mgr_register_full()``, and ``devm_fpga_mgr_register()`` are available
+to ease the registration.
+
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states
 
@@ -147,16 +153,16 @@ API for implementing a new FPGA Manager driver
    :functions: fpga_manager_info
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register_full
+   :functions: __fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register
+   :functions: __fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register_full
+   :functions: __devm_fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register
+   :functions: __devm_fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
    :functions: fpga_mgr_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-region.rst linux-libre-6.6.50-gnu/Documentation/driver-api/fpga/fpga-region.rst
index dc55d60a0b4a..2d03b5fb7657 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-region.rst
+++ linux-libre-6.6.50-gnu/Documentation/driver-api/fpga/fpga-region.rst
@@ -46,13 +46,16 @@ API to add a new FPGA region
 ----------------------------
 
 * struct fpga_region - The FPGA region struct
-* struct fpga_region_info - Parameter structure for fpga_region_register_full()
-* fpga_region_register_full() -  Create and register an FPGA region using the
+* struct fpga_region_info - Parameter structure for __fpga_region_register_full()
+* __fpga_region_register_full() -  Create and register an FPGA region using the
   fpga_region_info structure to provide the full flexibility of options
-* fpga_region_register() -  Create and register an FPGA region using standard
+* __fpga_region_register() -  Create and register an FPGA region using standard
   arguments
 * fpga_region_unregister() -  Unregister an FPGA region
 
+Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()``
+automatically set the module that registers the FPGA region as the owner.
+
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
@@ -82,10 +85,10 @@ following APIs to handle building or tearing down that list.
    :functions: fpga_region_info
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register_full
+   :functions: __fpga_region_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register
+   :functions: __fpga_region_register
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/pci/p2pdma.rst linux-libre-6.6.50-gnu/Documentation/driver-api/pci/p2pdma.rst
index 44deb52beeb4..d0b241628cf1 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/pci/p2pdma.rst
+++ linux-libre-6.6.50-gnu/Documentation/driver-api/pci/p2pdma.rst
@@ -83,19 +83,9 @@ this to include other types of resources like doorbells.
 Client Drivers
 --------------
 
-A client driver typically only has to conditionally change its DMA map
-routine to use the mapping function :c:func:`pci_p2pdma_map_sg()` instead
-of the usual :c:func:`dma_map_sg()` function. Memory mapped in this
-way does not need to be unmapped.
-
-The client may also, optionally, make use of
-:c:func:`is_pci_p2pdma_page()` to determine when to use the P2P mapping
-functions and when to use the regular mapping functions. In some
-situations, it may be more appropriate to use a flag to indicate a
-given request is P2P memory and map appropriately. It is important to
-ensure that struct pages that back P2P memory stay out of code that
-does not have support for them as other code may treat the pages as
-regular memory which may not be appropriate.
+A client driver only has to use the mapping API :c:func:`dma_map_sg()`
+and :c:func:`dma_unmap_sg()` functions as usual, and the implementation
+will do the right thing for the P2P capable memory.
 
 
 Orchestrator Drivers
diff --git linux-libre-6.6-gnu/Documentation/driver-api/pwm.rst linux-libre-6.6.50-gnu/Documentation/driver-api/pwm.rst
index 3fdc95f7a1d1..ed5ec9816538 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/pwm.rst
+++ linux-libre-6.6.50-gnu/Documentation/driver-api/pwm.rst
@@ -41,7 +41,7 @@ the getter, devm_pwm_get() and devm_fwnode_pwm_get(), also exist.
 
 After being requested, a PWM has to be configured using::
 
-	int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
+	int pwm_apply_might_sleep(struct pwm_device *pwm, struct pwm_state *state);
 
 This API controls both the PWM period/duty_cycle config and the
 enable/disable state.
@@ -57,13 +57,13 @@ If supported by the driver, the signal can be optimized, for example to improve
 EMI by phase shifting the individual channels of a chip.
 
 The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers
-around pwm_apply_state() and should not be used if the user wants to change
+around pwm_apply_might_sleep() and should not be used if the user wants to change
 several parameter at once. For example, if you see pwm_config() and
 pwm_{enable,disable}() calls in the same function, this probably means you
-should switch to pwm_apply_state().
+should switch to pwm_apply_might_sleep().
 
 The PWM user API also allows one to query the PWM state that was passed to the
-last invocation of pwm_apply_state() using pwm_get_state(). Note this is
+last invocation of pwm_apply_might_sleep() using pwm_get_state(). Note this is
 different to what the driver has actually implemented if the request cannot be
 satisfied exactly with the hardware in use. There is currently no way for
 consumers to get the actually implemented settings.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/directory-locking.rst linux-libre-6.6.50-gnu/Documentation/filesystems/directory-locking.rst
index dccd61c7c5c3..193c22687851 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-6.6.50-gnu/Documentation/filesystems/directory-locking.rst
@@ -22,13 +22,16 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
-parent and finds source and target.  We lock both (provided they exist).  If we
-need to lock two inodes of different type (dir vs non-dir), we lock directory
-first.  If we need to lock two inodes of the same type, lock them in inode
-pointer order.  Then call the method.  All locks are exclusive.
-NB: we might get away with locking the source (and target in exchange
-case) shared.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks
+the parent and finds source and target.  Then we decide which of the
+source and target need to be locked.  Source needs to be locked if it's a
+non-directory; target - if it's a non-directory or about to be removed.
+Take the locks that need to be taken, in inode pointer order if need
+to take both (that can happen only when both source and target are
+non-directories - the source because it wouldn't be locked otherwise
+and the target because mixing directory and non-directory is allowed
+only with RENAME_EXCHANGE, and that won't be removing the target).
+After the locks had been taken, call the method.  All locks are exclusive.
 
 5) link creation.  Locking rules:
 
@@ -44,20 +47,17 @@ rules:
 
 	* lock the filesystem
 	* lock parents in "ancestors first" order. If one is not ancestor of
-	  the other, lock them in inode pointer order.
+	  the other, lock the parent of source first.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* Lock both the source and the target provided they exist. If we
-	  need to lock two inodes of different type (dir vs non-dir), we lock
-	  the directory first. If we need to lock two inodes of the same type,
-	  lock them in inode pointer order.
+	* Lock subdirectories involved (source before target).
+	* Lock non-directories involved, in inode pointer order.
 	* call the method.
 
-All ->i_rwsem are taken exclusive.  Again, we might get away with locking
-the source (and target in exchange case) shared.
+All ->i_rwsem are taken exclusive.
 
 The rules above obviously guarantee that all directories that are going to be
 read, modified or removed by method will be locked by caller.
@@ -67,6 +67,7 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
+[XXX: will be updated once we are done massaging the lock_rename()]
 	First of all, at any moment we have a linear ordering of the
 	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
         of A and ptr(A) < ptr(B)).
diff --git linux-libre-6.6-gnu/Documentation/filesystems/f2fs.rst linux-libre-6.6.50-gnu/Documentation/filesystems/f2fs.rst
index d32c6209685d..dbfbbe9ab28b 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-6.6.50-gnu/Documentation/filesystems/f2fs.rst
@@ -126,9 +126,7 @@ norecovery		 Disable the roll-forward recovery routine, mounted read-
 discard/nodiscard	 Enable/disable real-time discard in f2fs, if discard is
 			 enabled, f2fs will issue discard/TRIM commands when a
 			 segment is cleaned.
-no_heap			 Disable heap-style segment allocation which finds free
-			 segments for data from the beginning of main area, while
-			 for node from the end of main area.
+heap/no_heap		 Deprecated.
 nouser_xattr		 Disable Extended User Attributes. Note: xattr is enabled
 			 by default if CONFIG_F2FS_FS_XATTR is selected.
 noacl			 Disable POSIX Access Control List. Note: acl is enabled
@@ -228,8 +226,6 @@ mode=%s			 Control block allocation mode which supports "adaptive"
 			 option for more randomness.
 			 Please, use these options for your experiments and we strongly
 			 recommend to re-format the filesystem after using these options.
-io_bits=%u		 Set the bit size of write IO requests. It should be set
-			 with "mode=lfs".
 usrquota		 Enable plain user disk quota accounting.
 grpquota		 Enable plain group disk quota accounting.
 prjquota		 Enable plain project quota accounting.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/locking.rst linux-libre-6.6.50-gnu/Documentation/filesystems/locking.rst
index 7be2900806c8..bd12f2f850ad 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/locking.rst
+++ linux-libre-6.6.50-gnu/Documentation/filesystems/locking.rst
@@ -101,7 +101,7 @@ symlink:	exclusive
 mkdir:		exclusive
 unlink:		exclusive (both)
 rmdir:		exclusive (both)(see below)
-rename:		exclusive (all)	(see below)
+rename:		exclusive (both parents, some children)	(see below)
 readlink:	no
 get_link:	no
 setattr:	exclusive
@@ -123,6 +123,9 @@ get_offset_ctx  no
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem
 	exclusive on victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
+	->unlink() and ->rename() have ->i_rwsem exclusive on all non-directories
+	involved.
+	->rename() has ->i_rwsem exclusive on any subdirectory that changes parent.
 
 See Documentation/filesystems/directory-locking.rst for more detailed discussion
 of the locking scheme for directory operations.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/overlayfs.rst linux-libre-6.6.50-gnu/Documentation/filesystems/overlayfs.rst
index 5b93268e400f..56a5ad7a4fbd 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/overlayfs.rst
+++ linux-libre-6.6.50-gnu/Documentation/filesystems/overlayfs.rst
@@ -344,10 +344,11 @@ escaping the colons with a single backslash.  For example:
 
   mount -t overlay overlay -olowerdir=/a\:lower\:\:dir /merged
 
-Since kernel version v6.5, directory names containing colons can also
-be provided as lower layer using the fsconfig syscall from new mount api:
+Since kernel version v6.8, directory names containing colons can also
+be configured as lower layer using the "lowerdir+" mount options and the
+fsconfig syscall from new mount api.  For example:
 
-  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/a:lower::dir", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/a:lower::dir", 0);
 
 In the latter case, colons in lower layer directory names will be escaped
 as an octal characters (\072) when displayed in /proc/self/mountinfo.
@@ -416,6 +417,16 @@ Only the data of the files in the "data-only" lower layers may be visible
 when a "metacopy" file in one of the lower layers above it, has a "redirect"
 to the absolute path of the "lower data" file in the "data-only" lower layer.
 
+Since kernel version v6.8, "data-only" lower layers can also be added using
+the "datadir+" mount options and the fsconfig syscall from new mount api.
+For example:
+
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l1", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l2", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l3", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do1", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do2", 0);
+
 
 fs-verity support
 ----------------------
diff --git linux-libre-6.6-gnu/Documentation/filesystems/porting.rst linux-libre-6.6.50-gnu/Documentation/filesystems/porting.rst
index 4d05b9862451..41d964b48e65 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/porting.rst
+++ linux-libre-6.6.50-gnu/Documentation/filesystems/porting.rst
@@ -1045,3 +1045,21 @@ filesystem type is now moved to a later point when the devices are closed:
 As this is a VFS level change it has no practical consequences for filesystems
 other than that all of them must use one of the provided kill_litter_super(),
 kill_anon_super(), or kill_block_super() helpers.
+
+---
+
+**mandatory**
+
+If ->rename() update of .. on cross-directory move needs an exclusion with
+directory modifications, do *not* lock the subdirectory in question in your
+->rename() - it's done by the caller now [that item should've been added in
+28eceeda130f "fs: Lock moved directories"].
+
+---
+
+**mandatory**
+
+On same-directory ->rename() the (tautological) update of .. is not protected
+by any locks; just don't do it if the old parent is the same as the new one.
+We really can't lock two subdirectories in same-directory rename - not without
+deadlocks.
diff --git linux-libre-6.6-gnu/Documentation/gpu/drm-kms.rst linux-libre-6.6.50-gnu/Documentation/gpu/drm-kms.rst
index a0c83fc48126..690d2ffe720e 100644
--- linux-libre-6.6-gnu/Documentation/gpu/drm-kms.rst
+++ linux-libre-6.6.50-gnu/Documentation/gpu/drm-kms.rst
@@ -546,6 +546,8 @@ Plane Composition Properties
 .. kernel-doc:: drivers/gpu/drm/drm_blend.c
    :doc: overview
 
+.. _damage_tracking_properties:
+
 Damage Tracking Properties
 --------------------------
 
diff --git linux-libre-6.6-gnu/Documentation/gpu/todo.rst linux-libre-6.6.50-gnu/Documentation/gpu/todo.rst
index 03fe5d1247be..85bbe0543609 100644
--- linux-libre-6.6-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.6.50-gnu/Documentation/gpu/todo.rst
@@ -337,8 +337,8 @@ connector register/unregister fixes
 
 Level: Intermediate
 
-Remove load/unload callbacks from all non-DRIVER_LEGACY drivers
----------------------------------------------------------------
+Remove load/unload callbacks
+----------------------------
 
 The load/unload callbacks in struct &drm_driver are very much midlayers, plus
 for historical reasons they get the ordering wrong (and we can't fix that)
@@ -347,8 +347,7 @@ between setting up the &drm_driver structure and calling drm_dev_register().
 - Rework drivers to no longer use the load/unload callbacks, directly coding the
   load/unload sequence into the driver's probe function.
 
-- Once all non-DRIVER_LEGACY drivers are converted, disallow the load/unload
-  callbacks for all modern drivers.
+- Once all drivers are converted, remove the load/unload callbacks.
 
 Contact: Daniel Vetter
 
diff --git linux-libre-6.6-gnu/Documentation/hwmon/corsair-psu.rst linux-libre-6.6.50-gnu/Documentation/hwmon/corsair-psu.rst
index 16db34d464dd..7ed794087f84 100644
--- linux-libre-6.6-gnu/Documentation/hwmon/corsair-psu.rst
+++ linux-libre-6.6.50-gnu/Documentation/hwmon/corsair-psu.rst
@@ -15,11 +15,11 @@ Supported devices:
 
   Corsair HX850i
 
-  Corsair HX1000i (Series 2022 and 2023)
+  Corsair HX1000i (Legacy and Series 2023)
 
-  Corsair HX1200i
+  Corsair HX1200i (Legacy and Series 2023)
 
-  Corsair HX1500i (Series 2022 and 2023)
+  Corsair HX1500i (Legacy and Series 2023)
 
   Corsair RM550i
 
diff --git linux-libre-6.6-gnu/Documentation/i2c/busses/i2c-i801.rst linux-libre-6.6.50-gnu/Documentation/i2c/busses/i2c-i801.rst
index e76e68ccf718..10eced6c2e46 100644
--- linux-libre-6.6-gnu/Documentation/i2c/busses/i2c-i801.rst
+++ linux-libre-6.6.50-gnu/Documentation/i2c/busses/i2c-i801.rst
@@ -47,6 +47,7 @@ Supported adapters:
   * Intel Alder Lake (PCH)
   * Intel Raptor Lake (PCH)
   * Intel Meteor Lake (SOC and PCH)
+  * Intel Birch Stream (SOC)
 
    Datasheets: Publicly available at the Intel website
 
diff --git linux-libre-6.6-gnu/Documentation/kbuild/modules.rst linux-libre-6.6.50-gnu/Documentation/kbuild/modules.rst
index a1f3eb7a43e2..131863142cbb 100644
--- linux-libre-6.6-gnu/Documentation/kbuild/modules.rst
+++ linux-libre-6.6.50-gnu/Documentation/kbuild/modules.rst
@@ -128,7 +128,7 @@ executed to make module versioning work.
 
 	modules_install
 		Install the external module(s). The default location is
-		/lib/modules/<kernel_release>/extra/, but a prefix may
+		/lib/modules/<kernel_release>/updates/, but a prefix may
 		be added with INSTALL_MOD_PATH (discussed in section 5).
 
 	clean
@@ -417,7 +417,7 @@ directory:
 
 And external modules are installed in:
 
-	/lib/modules/$(KERNELRELEASE)/extra/
+	/lib/modules/$(KERNELRELEASE)/updates/
 
 5.1 INSTALL_MOD_PATH
 --------------------
@@ -438,10 +438,10 @@ And external modules are installed in:
 -------------------
 
 	External modules are by default installed to a directory under
-	/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+	/lib/modules/$(KERNELRELEASE)/updates/, but you may wish to
 	locate modules for a specific functionality in a separate
 	directory. For this purpose, use INSTALL_MOD_DIR to specify an
-	alternative name to "extra."::
+	alternative name to "updates."::
 
 		$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
 		       M=$PWD modules_install
diff --git linux-libre-6.6-gnu/Documentation/locking/hwspinlock.rst linux-libre-6.6.50-gnu/Documentation/locking/hwspinlock.rst
index 6f03713b7003..2ffaa3cbd63f 100644
--- linux-libre-6.6-gnu/Documentation/locking/hwspinlock.rst
+++ linux-libre-6.6.50-gnu/Documentation/locking/hwspinlock.rst
@@ -85,6 +85,17 @@ is already free).
 
 Should be called from a process context (might sleep).
 
+::
+
+  int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id);
+
+After verifying the owner of the hwspinlock, release a previously acquired
+hwspinlock; returns 0 on success, or an appropriate error code on failure
+(e.g. -EOPNOTSUPP if the bust operation is not defined for the specific
+hwspinlock).
+
+Should be called from a process context (might sleep).
+
 ::
 
   int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
diff --git linux-libre-6.6-gnu/Documentation/mm/arch_pgtable_helpers.rst linux-libre-6.6.50-gnu/Documentation/mm/arch_pgtable_helpers.rst
index c82e3ee20e51..8c71249e7c4d 100644
--- linux-libre-6.6-gnu/Documentation/mm/arch_pgtable_helpers.rst
+++ linux-libre-6.6.50-gnu/Documentation/mm/arch_pgtable_helpers.rst
@@ -142,7 +142,8 @@ PMD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pmd_swp_clear_soft_dirty  | Clears a soft dirty swapped PMD                  |
 +---------------------------+--------------------------------------------------+
-| pmd_mkinvalid             | Invalidates a mapped PMD [1]                     |
+| pmd_mkinvalid             | Invalidates a present PMD; do not call for       |
+|                           | non-present PMD [1]                              |
 +---------------------------+--------------------------------------------------+
 | pmd_set_huge              | Creates a PMD huge mapping                       |
 +---------------------------+--------------------------------------------------+
@@ -198,7 +199,8 @@ PUD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pud_mkdevmap              | Creates a ZONE_DEVICE mapped PUD                 |
 +---------------------------+--------------------------------------------------+
-| pud_mkinvalid             | Invalidates a mapped PUD [1]                     |
+| pud_mkinvalid             | Invalidates a present PUD; do not call for       |
+|                           | non-present PUD [1]                              |
 +---------------------------+--------------------------------------------------+
 | pud_set_huge              | Creates a PUD huge mapping                       |
 +---------------------------+--------------------------------------------------+
diff --git linux-libre-6.6-gnu/Documentation/mm/page_table_check.rst linux-libre-6.6.50-gnu/Documentation/mm/page_table_check.rst
index c12838ce6b8d..c59f22eb6a0f 100644
--- linux-libre-6.6-gnu/Documentation/mm/page_table_check.rst
+++ linux-libre-6.6.50-gnu/Documentation/mm/page_table_check.rst
@@ -14,7 +14,7 @@ Page table check performs extra verifications at the time when new pages become
 accessible from the userspace by getting their page table entries (PTEs PMDs
 etc.) added into the table.
 
-In case of detected corruption, the kernel is crashed. There is a small
+In case of most detected corruption, the kernel is crashed. There is a small
 performance and memory overhead associated with the page table check. Therefore,
 it is disabled by default, but can be optionally enabled on systems where the
 extra hardening outweighs the performance costs. Also, because page table check
@@ -22,6 +22,13 @@ is synchronous, it can help with debugging double map memory corruption issues,
 by crashing kernel at the time wrong mapping occurs instead of later which is
 often the case with memory corruptions bugs.
 
+It can also be used to do page table entry checks over various flags, dump
+warnings when illegal combinations of entry flags are detected.  Currently,
+userfaultfd is the only user of such to sanity check wr-protect bit against
+any writable flags.  Illegal flag combinations will not directly cause data
+corruption in this case immediately, but that will cause read-only data to
+be writable, leading to corrupt when the page content is later modified.
+
 Double mapping detection logic
 ==============================
 
diff --git linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst linux-libre-6.6.50-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index 5eaa3ab6c73e..b842bcb14255 100644
--- linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ linux-libre-6.6.50-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -54,6 +54,7 @@ ena_common_defs.h   Common definitions for ena_com layer.
 ena_regs_defs.h     Definition of ENA PCI memory-mapped (MMIO) registers.
 ena_netdev.[ch]     Main Linux kernel driver.
 ena_ethtool.c       ethtool callbacks.
+ena_xdp.[ch]        XDP files
 ena_pci_id_tbl.h    Supported device IDs.
 =================   ======================================================
 
diff --git linux-libre-6.6-gnu/Documentation/networking/devlink/devlink-port.rst linux-libre-6.6.50-gnu/Documentation/networking/devlink/devlink-port.rst
index e33ad2401ad7..562f46b41274 100644
--- linux-libre-6.6-gnu/Documentation/networking/devlink/devlink-port.rst
+++ linux-libre-6.6.50-gnu/Documentation/networking/devlink/devlink-port.rst
@@ -126,7 +126,7 @@ Users may also set the RoCE capability of the function using
 `devlink port function set roce` command.
 
 Users may also set the function as migratable using
-'devlink port function set migratable' command.
+`devlink port function set migratable` command.
 
 Users may also set the IPsec crypto capability of the function using
 `devlink port function set ipsec_crypto` command.
diff --git linux-libre-6.6-gnu/Documentation/powerpc/features.rst linux-libre-6.6.50-gnu/Documentation/powerpc/features.rst
index aeae73df86b0..ee4b95e04202 100644
--- linux-libre-6.6-gnu/Documentation/powerpc/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/powerpc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features powerpc
+.. kernel-feat:: features powerpc
diff --git linux-libre-6.6-gnu/Documentation/process/changes.rst linux-libre-6.6.50-gnu/Documentation/process/changes.rst
index b48da698d6f2..bb96ca0f774b 100644
--- linux-libre-6.6-gnu/Documentation/process/changes.rst
+++ linux-libre-6.6.50-gnu/Documentation/process/changes.rst
@@ -31,7 +31,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
 GNU C                  5.1              gcc --version
 Clang/LLVM (optional)  11.0.0           clang --version
-Rust (optional)        1.71.1           rustc --version
+Rust (optional)        1.73.0           rustc --version
 bindgen (optional)     0.65.1           bindgen --version
 GNU make               3.82             make --version
 bash                   4.2              bash --version
diff --git linux-libre-6.6-gnu/Documentation/riscv/features.rst linux-libre-6.6.50-gnu/Documentation/riscv/features.rst
index c70ef6ac2368..36e90144adab 100644
--- linux-libre-6.6-gnu/Documentation/riscv/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/riscv/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features riscv
+.. kernel-feat:: features riscv
diff --git linux-libre-6.6-gnu/Documentation/sound/soc/dapm.rst linux-libre-6.6.50-gnu/Documentation/sound/soc/dapm.rst
index 8e44107933ab..c3154ce6e1b2 100644
--- linux-libre-6.6-gnu/Documentation/sound/soc/dapm.rst
+++ linux-libre-6.6.50-gnu/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::
 
-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 This can be used to merge to signal paths together in software.
 
diff --git linux-libre-6.6-gnu/Documentation/sphinx/cdomain.py linux-libre-6.6.50-gnu/Documentation/sphinx/cdomain.py
index a99716bf44b5..de5d132d94c5 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/cdomain.py
+++ linux-libre-6.6.50-gnu/Documentation/sphinx/cdomain.py
@@ -93,7 +93,7 @@ def markup_ctype_refs(match):
 #
 RE_expr = re.compile(r':c:(expr|texpr):`([^\`]+)`')
 def markup_c_expr(match):
-    return '\ ``' + match.group(2) + '``\ '
+    return '\\ ``' + match.group(2) + '``\\ '
 
 #
 # Parse Sphinx 3.x C markups, replacing them by backward-compatible ones
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_abi.py linux-libre-6.6.50-gnu/Documentation/sphinx/kernel_abi.py
index b5feb5b1d905..5911bd0d7965 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_abi.py
+++ linux-libre-6.6.50-gnu/Documentation/sphinx/kernel_abi.py
@@ -39,8 +39,6 @@ import sys
 import re
 import kernellog
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -73,60 +71,26 @@ class KernelCmd(Directive):
     }
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
-        env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_abi.pl rest --enable-lineno --dir "
-        cmd += self.arguments[0]
-
-        if 'rst' in self.options:
-            cmd += " --rst-source"
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        srctree = path.abspath(os.environ["srctree"])
+        args = [
+            os.path.join(srctree, 'scripts/get_abi.pl'),
+            'rest',
+            '--enable-lineno',
+            '--dir', os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        fname = cmd
-
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if 'rst' in self.options:
+            args.append('--rst-source')
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
         nodeList = self.nestedParse(lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         env = self.state.document.settings.env
         content = ViewList()
@@ -138,7 +102,7 @@ class KernelCmd(Directive):
                 code_block += "\n    " + l
             lines = code_block + "\n\n"
 
-        line_regex = re.compile("^\.\. LINENO (\S+)\#([0-9]+)$")
+        line_regex = re.compile(r"^\.\. LINENO (\S+)\#([0-9]+)$")
         ln = 0
         n = 0
         f = fname
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_feat.py linux-libre-6.6.50-gnu/Documentation/sphinx/kernel_feat.py
index 27b701ed3681..03ace5f01b5c 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_feat.py
+++ linux-libre-6.6.50-gnu/Documentation/sphinx/kernel_feat.py
@@ -37,8 +37,6 @@ import re
 import subprocess
 import sys
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -76,35 +74,28 @@ class KernelFeat(Directive):
         self.state.document.settings.env.app.warn(message, prefix="")
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
         env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_feat.pl rest --enable-fname --dir "
-        cmd += self.arguments[0]
-
-        if len(self.arguments) > 1:
-            cmd += " --arch " + self.arguments[1]
 
-        srctree = path.abspath(os.environ["srctree"])
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        fname = cmd
+        args = [
+            os.path.join(srctree, 'scripts/get_feat.pl'),
+            'rest',
+            '--enable-fname',
+            '--dir',
+            os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if len(self.arguments) > 1:
+            args.extend(['--arch', self.arguments[1]])
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
 
-        line_regex = re.compile("^\.\. FILE (\S+)$")
+        line_regex = re.compile(r"^\.\. FILE (\S+)$")
 
         out_lines = ""
 
@@ -118,33 +109,9 @@ class KernelFeat(Directive):
             else:
                 out_lines += line + "\n"
 
-        nodeList = self.nestedParse(out_lines, fname)
+        nodeList = self.nestedParse(out_lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         content = ViewList()
         node    = nodes.section()
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_include.py linux-libre-6.6.50-gnu/Documentation/sphinx/kernel_include.py
index abe768088377..638762442336 100755
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_include.py
+++ linux-libre-6.6.50-gnu/Documentation/sphinx/kernel_include.py
@@ -97,7 +97,6 @@ class KernelInclude(Include):
         # HINT: this is the only line I had to change / commented out:
         #path = utils.relative_path(None, path)
 
-        path = nodes.reprunicode(path)
         encoding = self.options.get(
             'encoding', self.state.document.settings.input_encoding)
         e_handler=self.state.document.settings.input_encoding_error_handler
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kerneldoc.py linux-libre-6.6.50-gnu/Documentation/sphinx/kerneldoc.py
index 9395892c7ba3..8dc134904b90 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kerneldoc.py
+++ linux-libre-6.6.50-gnu/Documentation/sphinx/kerneldoc.py
@@ -130,7 +130,7 @@ class KernelDocDirective(Directive):
             result = ViewList()
 
             lineoffset = 0;
-            line_regex = re.compile("^\.\. LINENO ([0-9]+)$")
+            line_regex = re.compile(r"^\.\. LINENO ([0-9]+)$")
             for line in lines:
                 match = line_regex.search(line)
                 if match:
diff --git linux-libre-6.6-gnu/Documentation/sphinx/maintainers_include.py linux-libre-6.6.50-gnu/Documentation/sphinx/maintainers_include.py
index 328b3631a585..dcad0fff4723 100755
--- linux-libre-6.6-gnu/Documentation/sphinx/maintainers_include.py
+++ linux-libre-6.6.50-gnu/Documentation/sphinx/maintainers_include.py
@@ -77,7 +77,7 @@ class MaintainersInclude(Include):
             line = line.rstrip()
 
             # Linkify all non-wildcard refs to ReST files in Documentation/.
-            pat = '(Documentation/([^\s\?\*]*)\.rst)'
+            pat = r'(Documentation/([^\s\?\*]*)\.rst)'
             m = re.search(pat, line)
             if m:
                 # maintainers.rst is in a subdirectory, so include "../".
@@ -90,11 +90,11 @@ class MaintainersInclude(Include):
                 output = "| %s" % (line.replace("\\", "\\\\"))
                 # Look for and record field letter to field name mappings:
                 #   R: Designated *reviewer*: FullName <address@domain>
-                m = re.search("\s(\S):\s", line)
+                m = re.search(r"\s(\S):\s", line)
                 if m:
                     field_letter = m.group(1)
                 if field_letter and not field_letter in fields:
-                    m = re.search("\*([^\*]+)\*", line)
+                    m = re.search(r"\*([^\*]+)\*", line)
                     if m:
                         fields[field_letter] = m.group(1)
             elif subsystems:
@@ -112,7 +112,7 @@ class MaintainersInclude(Include):
                     field_content = ""
 
                     # Collapse whitespace in subsystem name.
-                    heading = re.sub("\s+", " ", line)
+                    heading = re.sub(r"\s+", " ", line)
                     output = output + "%s\n%s" % (heading, "~" * len(heading))
                     field_prev = ""
                 else:
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst linux-libre-6.6.50-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
index 82bfac180bdc..cec38dda8298 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
@@ -5,4 +5,4 @@
 :Original: Documentation/arch/loongarch/features.rst
 :Translator: Huacai Chen <chenhuacai@loongson.cn>
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/mips/features.rst linux-libre-6.6.50-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
index da1b956e4a40..0d6df97db069 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
+++ linux-libre-6.6.50-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
@@ -10,4 +10,4 @@
 
 .. _cn_features:
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/dev-tools/index.rst linux-libre-6.6.50-gnu/Documentation/translations/zh_TW/dev-tools/index.rst
new file mode 100644
index 000000000000..8f101db5a07f
--- /dev/null
+++ linux-libre-6.6.50-gnu/Documentation/translations/zh_TW/dev-tools/index.rst
@@ -0,0 +1,40 @@
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: Documentation/dev-tools/index.rst
+:Translator: Min-Hua Chen <minhuadotchen@gmail.com>
+
+============
+內核開發工具
+============
+
+本文檔是有關內核開發工具文檔的合集。
+目前這些文檔已經整理在一起，不需要再花費額外的精力。
+歡迎任何補丁。
+
+有關測試專用工具的簡要概述，參見
+Documentation/dev-tools/testing-overview.rst
+
+.. class:: toc-title
+
+	   目錄
+
+.. toctree::
+   :maxdepth: 2
+
+   sparse
+
+Todolist:
+
+ - coccinelle
+ - kcov
+ - ubsan
+ - kmemleak
+ - kcsan
+ - kfence
+ - kgdb
+ - kselftest
+ - kunit/index
+ - testing-overview
+ - gcov
+ - kasan
+ - gdb-kernel-debugging
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/sparse.txt linux-libre-6.6.50-gnu/Documentation/translations/zh_TW/dev-tools/sparse.txt
similarity index 100%
rename from Documentation/translations/zh_TW/sparse.txt
rename to Documentation/translations/zh_TW/dev-tools/sparse.txt
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/index.rst linux-libre-6.6.50-gnu/Documentation/translations/zh_TW/index.rst
index d1cf0b4d8e46..ffcaf3272fe7 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_TW/index.rst
+++ linux-libre-6.6.50-gnu/Documentation/translations/zh_TW/index.rst
@@ -55,11 +55,11 @@ TODOList:
    :maxdepth: 1
 
    process/license-rules
+   dev-tools/index
 
 TODOList:
 
 * doc-guide/index
-* dev-tools/index
 * dev-tools/testing-overview
 * kernel-hacking/index
 * rust/index
diff --git linux-libre-6.6-gnu/Documentation/userspace-api/media/mediactl/media-types.rst linux-libre-6.6.50-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
index 0ffeece1e0c8..6332e8395263 100644
--- linux-libre-6.6-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
+++ linux-libre-6.6.50-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
@@ -375,12 +375,11 @@ Types and flags used to represent the media graph elements
 	  are origins of links.
 
     *  -  ``MEDIA_PAD_FL_MUST_CONNECT``
-       -  If this flag is set and the pad is linked to any other pad, then
-	  at least one of those links must be enabled for the entity to be
-	  able to stream. There could be temporary reasons (e.g. device
-	  configuration dependent) for the pad to need enabled links even
-	  when this flag isn't set; the absence of the flag doesn't imply
-	  there is none.
+       -  If this flag is set, then for this pad to be able to stream, it must
+	  be connected by at least one enabled link. There could be temporary
+	  reasons (e.g. device configuration dependent) for the pad to need
+	  enabled links even when this flag isn't set; the absence of the flag
+	  doesn't imply there is none.
 
 
 One and only one of ``MEDIA_PAD_FL_SINK`` and ``MEDIA_PAD_FL_SOURCE``
diff --git linux-libre-6.6-gnu/MAINTAINERS linux-libre-6.6.50-gnu/MAINTAINERS
index dd5de540ec0b..f09415b2b3c5 100644
--- linux-libre-6.6-gnu/MAINTAINERS
+++ linux-libre-6.6.50-gnu/MAINTAINERS
@@ -8142,7 +8142,7 @@ M:	Geoffrey D. Bennett <g@b4.vu>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
-F:	sound/usb/mixer_scarlett_gen2.c
+F:	sound/usb/mixer_scarlett2.c
 
 FORCEDETH GIGABIT ETHERNET DRIVER
 M:	Rain River <rain.1986.08.12@gmail.com>
@@ -10157,6 +10157,14 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/rc/iguanair.c
 
+IIO BACKEND FRAMEWORK
+M:	Nuno Sa <nuno.sa@analog.com>
+R:	Olivier Moysan <olivier.moysan@foss.st.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/industrialio-backend.c
+F:	include/linux/iio/backend.h
+
 IIO DIGITAL POTENTIOMETER DAC
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-iio@vger.kernel.org
@@ -17380,7 +17388,7 @@ F:	drivers/video/backlight/pwm_bl.c
 F:	include/dt-bindings/pwm/
 F:	include/linux/pwm.h
 F:	include/linux/pwm_backlight.h
-K:	pwm_(config|apply_state|ops)
+K:	pwm_(config|apply_might_sleep|ops)
 
 PXA GPIO DRIVER
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
@@ -23630,6 +23638,7 @@ F:	include/xen/arm/swiotlb-xen.h
 F:	include/xen/swiotlb-xen.h
 
 XFS FILESYSTEM
+M:	Catherine Hoang <catherine.hoang@oracle.com>
 M:	Chandan Babu R <chandan.babu@oracle.com>
 R:	Darrick J. Wong <djwong@kernel.org>
 L:	linux-xfs@vger.kernel.org
diff --git linux-libre-6.6-gnu/Makefile linux-libre-6.6.50-gnu/Makefile
index bcbff502d718..90e6d61a7095 100644
--- linux-libre-6.6-gnu/Makefile
+++ linux-libre-6.6.50-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 6
-SUBLEVEL = 0
+SUBLEVEL = 50
 EXTRAVERSION = -gnu
 NAME = Hurr durr I'ma ninja sloth
 
@@ -951,7 +951,6 @@ endif
 ifdef CONFIG_LTO_CLANG
 ifdef CONFIG_LTO_CLANG_THIN
 CC_FLAGS_LTO	:= -flto=thin -fsplit-lto-unit
-KBUILD_LDFLAGS	+= --thinlto-cache-dir=$(extmod_prefix).thinlto-cache
 else
 CC_FLAGS_LTO	:= -flto
 endif
@@ -1317,6 +1316,14 @@ scripts_unifdef: scripts_basic
 quiet_cmd_install = INSTALL $(INSTALL_PATH)
       cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
 
+# ---------------------------------------------------------------------------
+# vDSO install
+
+PHONY += vdso_install
+vdso_install: export INSTALL_FILES = $(vdso-install-y)
+vdso_install:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst
+
 # ---------------------------------------------------------------------------
 # Tools
 
@@ -1474,7 +1481,7 @@ endif # CONFIG_MODULES
 # Directories & files removed with 'make clean'
 CLEAN_FILES += vmlinux.symvers modules-only.symvers \
 	       modules.builtin modules.builtin.modinfo modules.nsdeps \
-	       compile_commands.json .thinlto-cache rust/test \
+	       compile_commands.json rust/test \
 	       rust-project.json .vmlinux.objs .vmlinux.export.c
 
 # Directories & files removed with 'make mrproper'
@@ -1560,6 +1567,7 @@ help:
 	@echo  '* vmlinux	  - Build the bare kernel'
 	@echo  '* modules	  - Build all modules'
 	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+	@echo  '  vdso_install    - Install unstripped vdso to INSTALL_MOD_PATH (default: /)'
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[ois]  - Build specified target only'
 	@echo  '  dir/file.ll     - Build the LLVM assembly file'
@@ -1777,7 +1785,7 @@ PHONY += compile_commands.json
 
 clean-dirs := $(KBUILD_EXTMOD)
 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \
-	$(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache
+	$(KBUILD_EXTMOD)/compile_commands.json
 
 PHONY += prepare
 # now expand this into a simple variable to reduce the cost of shell evaluations
diff --git linux-libre-6.6-gnu/arch/Kconfig linux-libre-6.6.50-gnu/arch/Kconfig
index 12d51495caec..09603e0bc2cc 100644
--- linux-libre-6.6-gnu/arch/Kconfig
+++ linux-libre-6.6.50-gnu/arch/Kconfig
@@ -9,6 +9,14 @@
 #
 source "arch/$(SRCARCH)/Kconfig"
 
+config ARCH_CONFIGURES_CPU_MITIGATIONS
+	bool
+
+if !ARCH_CONFIGURES_CPU_MITIGATIONS
+config CPU_MITIGATIONS
+	def_bool y
+endif
+
 menu "General architecture-dependent options"
 
 config ARCH_HAS_SUBPAGE_FAULTS
@@ -681,6 +689,7 @@ config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
 	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
diff --git linux-libre-6.6-gnu/arch/alpha/kernel/rtc.c linux-libre-6.6.50-gnu/arch/alpha/kernel/rtc.c
index fb3025396ac9..cfdf90bc8b3f 100644
--- linux-libre-6.6-gnu/arch/alpha/kernel/rtc.c
+++ linux-libre-6.6.50-gnu/arch/alpha/kernel/rtc.c
@@ -80,7 +80,7 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	int ret = mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm, 10);
 
 	if (ret < 0) {
 		dev_err_ratelimited(dev, "unable to read current time\n");
diff --git linux-libre-6.6-gnu/arch/alpha/kernel/setup.c linux-libre-6.6.50-gnu/arch/alpha/kernel/setup.c
index c80258ec332f..85a679ce061c 100644
--- linux-libre-6.6-gnu/arch/alpha/kernel/setup.c
+++ linux-libre-6.6.50-gnu/arch/alpha/kernel/setup.c
@@ -131,6 +131,7 @@ static void determine_cpu_caches (unsigned int);
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
+#ifdef CONFIG_VGA_CONSOLE
 /*
  * The format of "screen_info" is strange, and due to early
  * i386-setup code. This is just enough to make the console
@@ -147,6 +148,7 @@ struct screen_info screen_info = {
 };
 
 EXPORT_SYMBOL(screen_info);
+#endif
 
 /*
  * The direct map I/O window, if any.  This should be the same
diff --git linux-libre-6.6-gnu/arch/alpha/kernel/sys_sio.c linux-libre-6.6.50-gnu/arch/alpha/kernel/sys_sio.c
index 7c420d8dac53..7de8a5d2d206 100644
--- linux-libre-6.6-gnu/arch/alpha/kernel/sys_sio.c
+++ linux-libre-6.6.50-gnu/arch/alpha/kernel/sys_sio.c
@@ -57,11 +57,13 @@ sio_init_irq(void)
 static inline void __init
 alphabook1_init_arch(void)
 {
+#ifdef CONFIG_VGA_CONSOLE
 	/* The AlphaBook1 has LCD video fixed at 800x600,
 	   37 rows and 100 cols. */
 	screen_info.orig_y = 37;
 	screen_info.orig_video_cols = 100;
 	screen_info.orig_video_lines = 37;
+#endif
 
 	lca_init_arch();
 }
diff --git linux-libre-6.6-gnu/arch/arc/boot/dts/hsdk.dts linux-libre-6.6.50-gnu/arch/arc/boot/dts/hsdk.dts
index 6691f4255077..41b980df862b 100644
--- linux-libre-6.6-gnu/arch/arc/boot/dts/hsdk.dts
+++ linux-libre-6.6.50-gnu/arch/arc/boot/dts/hsdk.dts
@@ -205,7 +205,6 @@
 		};
 
 		gmac: ethernet@8000 {
-			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
diff --git linux-libre-6.6-gnu/arch/arc/include/asm/cacheflush.h linux-libre-6.6.50-gnu/arch/arc/include/asm/cacheflush.h
index bd5b1a9a0544..6fc74500a9f5 100644
--- linux-libre-6.6-gnu/arch/arc/include/asm/cacheflush.h
+++ linux-libre-6.6.50-gnu/arch/arc/include/asm/cacheflush.h
@@ -40,6 +40,7 @@ void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 /* TBD: optimize this */
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
diff --git linux-libre-6.6-gnu/arch/arc/include/asm/jump_label.h linux-libre-6.6.50-gnu/arch/arc/include/asm/jump_label.h
index 9d9618079739..a339223d9e05 100644
--- linux-libre-6.6-gnu/arch/arc/include/asm/jump_label.h
+++ linux-libre-6.6.50-gnu/arch/arc/include/asm/jump_label.h
@@ -31,7 +31,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "nop							\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -47,7 +47,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "b %l[l_yes]						\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
diff --git linux-libre-6.6-gnu/arch/arc/kernel/setup.c linux-libre-6.6.50-gnu/arch/arc/kernel/setup.c
index 4dcf8589b708..d08a5092c2b4 100644
--- linux-libre-6.6-gnu/arch/arc/kernel/setup.c
+++ linux-libre-6.6.50-gnu/arch/arc/kernel/setup.c
@@ -153,7 +153,7 @@ static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
 	int n = 0;
 #ifdef CONFIG_ISA_ARCV2
-	const char *release, *cpu_nm, *isa_nm = "ARCv2";
+	const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2";
 	int dual_issue = 0, dual_enb = 0, mpy_opt, present;
 	int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk;
 	char mpy_nm[16], lpb_nm[32];
@@ -172,8 +172,6 @@ static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 	 * releases only update it.
 	 */
 
-	cpu_nm = "HS38";
-
 	if (info->arcver > 0x50 && info->arcver <= 0x53) {
 		release = arc_hs_rel[info->arcver - 0x51].str;
 	} else {
diff --git linux-libre-6.6-gnu/arch/arc/kernel/signal.c linux-libre-6.6.50-gnu/arch/arc/kernel/signal.c
index 0b3bb529d246..8f6f4a542964 100644
--- linux-libre-6.6-gnu/arch/arc/kernel/signal.c
+++ linux-libre-6.6.50-gnu/arch/arc/kernel/signal.c
@@ -62,7 +62,7 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
-static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
@@ -75,12 +75,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
 #else
 	v2abi.r58 = v2abi.r59 = 0;
 #endif
-	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
 #endif
 	return err;
 }
 
-static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
diff --git linux-libre-6.6-gnu/arch/arm/Kconfig linux-libre-6.6.50-gnu/arch/arm/Kconfig
index 9557808e8937..57c0448d017a 100644
--- linux-libre-6.6-gnu/arch/arm/Kconfig
+++ linux-libre-6.6.50-gnu/arch/arm/Kconfig
@@ -589,8 +589,8 @@ source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
diff --git linux-libre-6.6-gnu/arch/arm/Makefile linux-libre-6.6.50-gnu/arch/arm/Makefile
index 547e5856eaa0..5ba42f69f8ce 100644
--- linux-libre-6.6-gnu/arch/arm/Makefile
+++ linux-libre-6.6.50-gnu/arch/arm/Makefile
@@ -304,11 +304,7 @@ $(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
 	$(call cmd,install)
 
-PHONY += vdso_install
-vdso_install:
-ifeq ($(CONFIG_VDSO),y)
-	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
-endif
+vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
 
 # My testing targets (bypasses dependencies)
 bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
@@ -331,7 +327,6 @@ define archhelp
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
-  echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
   echo
   echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/allwinner/Makefile linux-libre-6.6.50-gnu/arch/arm/boot/dts/allwinner/Makefile
index eebb5a0c873a..296be33ec934 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/allwinner/Makefile
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/allwinner/Makefile
@@ -259,68 +259,6 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
 	sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-bananapi-m3.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-bananapi-m2-zero.dtb \
-	sun8i-h2-plus-libretech-all-h3-cc.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-libretech-all-h3-cc.dtb \
-	sun8i-h3-mapleboard-mp130.dtb \
-	sun8i-h3-nanopi-duo2.dtb \
-	sun8i-h3-nanopi-m1.dtb\
-	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-nanopi-r1.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-orangepi-zero-plus2.dtb \
-	sun8i-h3-rervision-dvk.dtb \
-	sun8i-h3-zeropi.dtb \
-	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic.dtb \
-	sun8i-r16-nintendo-super-nes-classic.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-r40-oka40i-c.dtb \
-	sun8i-s3-elimo-initium.dtb \
-	sun8i-s3-lichee-zero-plus.dtb \
-	sun8i-s3-pinecube.dtb \
-	sun8i-t113s-mangopi-mq-r-t113.dtb \
-	sun8i-t3-cqa3t-bv3.dtb \
-	sun8i-v3-sl631-imx179.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/amazon/alpine.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
index ff68dfb4eb78..90bd12feac01 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index efed325af88d..d99bac02232b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -451,7 +451,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index e899de681f47..5be0e8fd2633 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -45,8 +45,8 @@
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index a677c827e758..5a8169bbda87 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -80,8 +80,8 @@
 		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010ef2b86..213023bc5aec 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5eb2..857cb26ed6d7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb97..e6f3cf3c721e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be..29f94696d8b1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 31590d3186a2..00e5887c926f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -35,8 +35,8 @@
 		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed82518..07ca0d993c9f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 788a6806191a..75545b10ef2f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 9d20ba3b1ffb..6a4482c93167 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
index 1ab8184302db..5a2869a18bd5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -36,9 +36,7 @@
 	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 };
 
-&leds {
-	/delete-node/ led_act;
-};
+/delete-node/ &led_act;
 
 &pm {
 	/delete-property/ system-power-controller;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
index 42bcbf10957c..9f9084269ef5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -181,5 +181,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
index e04d2e5ea51a..72e960c888ac 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -85,5 +85,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
index a399800139d9..750e17482371 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -88,5 +88,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
index fad3473810a2..2bdbc7d18b0e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -122,5 +122,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
index 5b2b7b8b3b12..b226bef3369c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -145,6 +145,14 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
index d0a26b643b82..192b8db5a89c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
@@ -145,5 +145,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
index 9f21d6d6d35b..0198b5f9e4a7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -81,5 +81,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
index 256107291702..73ff1694a4a0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -148,5 +148,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
index 707c561703ed..55fc9f44cbc7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -227,6 +227,14 @@
 			label = "wan";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
index c914569ddd5e..e6d26987865d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -144,6 +144,14 @@
 			label = "wan";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
index f050acbea0b2..3124dfd01b94 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -192,6 +192,14 @@
 			label = "wan";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 			phy-mode = "rgmii";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
index e8991d4e248c..e374062eb5b7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -107,5 +107,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
index afc635c8cdeb..badafa024d24 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -120,5 +120,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
index 7cfa4607ef31..cf95af9db1e6 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -107,5 +107,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
index d55e10095eae..992c19e1cfa1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -75,5 +75,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
index ccf031c0e276..4d0ba315a204 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -147,5 +147,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
index e28f7a350117..83c429afc297 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -158,5 +158,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
index 03ad614e6b72..0bf5106f7012 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -124,6 +124,14 @@
 				full-duplex;
 			};
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
index 26c12bfb0bdd..25eeacf6a248 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -185,6 +185,14 @@
 				full-duplex;
 			};
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts
index 4fe3b3653376..d939ec9f4a9e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/broadcom/bcm953012er.dts
@@ -84,6 +84,14 @@
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6afd13a..6d5e69035f94 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169bacf8..5f4c849915db 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index dffb9f84e67c..c841eb8e7fb1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
index 04f1ae1382e7..bc64348b8218 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -28,7 +28,7 @@
 &twsi1 {
 	status = "okay";
 	pmic: max8925@3c {
-		compatible = "maxium,max8925";
+		compatible = "maxim,max8925";
 		reg = <0x3c>;
 		interrupts = <1>;
 		interrupt-parent = <&intcmux4>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index 217e9b96c61e..20b2497657ae 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -293,7 +293,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1150000>;
+						regulator-suspend-microvolt = <1150000>;
 						regulator-mode = <4>;
 					};
 
@@ -314,7 +314,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1050000>;
+						regulator-suspend-microvolt = <1050000>;
 						regulator-mode = <4>;
 					};
 
@@ -331,7 +331,7 @@
 					regulator-always-on;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -346,7 +346,7 @@
 					regulator-max-microvolt = <3700000>;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7a1e5d..6e1f0f164cb4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763fd4af..ff0d684622f7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 3b6fad273cab..d38f1dd38a90 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 4eb526fe9c55..81c8a5fd92cc 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 1f11e9542a72..e66eef87a7a4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index e312f1e74e2f..4aeb74479f44 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index fc8a502fc957..6cddb2cc36fe 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index 04f4b127a172..e93bf3b7115f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -68,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index d7618c7e20e9..56b3bcf77788 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -543,7 +543,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index a21f1f7c24b8..849306cb4532 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,7 +47,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bbcd9d4..c7e923584878 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 145e459625b3..d78793601306 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 25442eba21c1..27c93b9fe049 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d3ec2d..67b235044b70 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 7191e10712b9..efce284b5796 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -314,7 +314,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index faba12ee7465..cac4b3d68986 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4bb1..c32ea040fecd 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -117,17 +117,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
@@ -149,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
index 52a0f6ee426f..bcf4d9c870ec 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
@@ -274,24 +274,24 @@
 
 		led@0 {
 			chan-name = "R";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
+			led-cur = /bits/ 8 <0x6e>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <0>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led@1 {
 			chan-name = "G";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
+			led-cur = /bits/ 8 <0xbe>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <1>;
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		led@2 {
 			chan-name = "B";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
+			led-cur = /bits/ 8 <0xbe>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <2>;
 			color = <LED_COLOR_ID_BLUE>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 717decda0ceb..3ac7a4501620 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can1_power>;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can2_power>;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1..cad112e05475 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6ac71d4..c1ae7c47b442 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
index 4d6a0c3e8455..ff062f4fd726 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
@@ -5,31 +5,8 @@
 
 #include "imx6q.dtsi"
 #include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Kontron SMARC sAMX6i Quad/Dual";
 	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
 };
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>,
-		   <&gpio3 25 GPIO_ACTIVE_LOW>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
index a3f247c722b4..0342a79ccd5d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -37,9 +37,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &hdmi {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 4cc965277c52..dcb4f6a32f80 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -619,7 +619,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a2dacb..6cc4d6fd5f28 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -543,7 +543,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index a63e73adc1fc..42b2ba23aefc 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
index 85aeebc9485d..668d33d1ff0c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
@@ -244,7 +244,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
@@ -259,7 +260,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&ethphy>;
 
 	mdio {
@@ -269,7 +270,7 @@
 		ethphy: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 		};
 	};
@@ -464,6 +465,8 @@
 			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
 			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
 		>;
 	};
 
@@ -516,7 +519,7 @@
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x1b0b0 /* RST_GBE0_PHY# */
 		>;
 	};
 
@@ -729,7 +732,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
 };
 
 /* LCD_BKLT_PWM */
@@ -817,5 +820,6 @@
 	/* CPLD is feeded by watchdog (hardwired) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 113974520d54..c0c47adc5866 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269e0e01..85e278eb2016 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index 4ffe99ed55ca..07dcecbe485d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -121,6 +121,8 @@
 			max-speed = <100>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index ea627638e40c..7dd1fe5a2fb7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -121,7 +121,7 @@
 	tpm_tis: tpm@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <1>;
 		spi-max-frequency = <20000000>;
 		interrupt-parent = <&gpio5>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
index 3fdece5bd31f..5248a058230c 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -805,6 +805,7 @@
 		     &pinctrl_usb_pwr>;
 	dr_mode = "host";
 	power-active-high;
+	over-current-active-low;
 	disable-over-current;
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
index 3a723843d562..9984b343cdf0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -130,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 12361fcbe24a..1b965652291b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index 4b94b8afb55d..0484e349e064 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -217,9 +217,6 @@
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index ba7231b364bb..7bab113ca6da 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -210,6 +210,7 @@
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index ef7066f536df..5d43293f618d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -190,7 +190,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -454,7 +458,7 @@
 			};
 
 			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
@@ -463,7 +467,7 @@
 			};
 
 			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
@@ -473,7 +477,7 @@
 			};
 
 			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
@@ -483,7 +487,7 @@
 			};
 
 			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
@@ -814,7 +818,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -1278,7 +1282,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index 46057d9bf555..c2efcc20ae80 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index 5eca942a52fd..14c07b585f82 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -412,7 +412,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7>, <5>, <9>, <26>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
index a400c108f66a..6c5e6856648a 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
@@ -8,6 +8,7 @@
 #include "imx28-lwe.dtsi"
 
 / {
+	model = "Liebherr XEA board";
 	compatible = "lwn,imx28-xea", "fsl,imx28";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 763adeb995ee..9b73130887ea 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -990,7 +990,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <78>, <79>, <66>, <0>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06c4efa..a248b8a45342 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/pm8226.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
rename to arch/arm/boot/dts/qcom/pm8226.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/pm8841.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
rename to arch/arm/boot/dts/qcom/pm8841.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/pm8941.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
rename to arch/arm/boot/dts/qcom/pm8941.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/pma8084.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
rename to arch/arm/boot/dts/qcom/pma8084.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/pmx55.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
rename to arch/arm/boot/dts/qcom/pmx55.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/pmx65.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
rename to arch/arm/boot/dts/qcom/pmx65.dtsi
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8d2a97..a39f5a161b03 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640efe55..59b218042d32 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 #include <dt-bindings/input/ti-drv260x.h>
 
 /delete-node/ &adsp_region;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index b887e5361ec3..feb78afef3a6 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index 884d99297d4c..cffc069712b2 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 /delete-node/ &smem_region;
@@ -45,11 +45,11 @@
 
 		event-hall-sensor {
 			label = "Hall Effect Sensor";
-			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-			interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			debounce-interval = <15>;
+			linux,can-disable;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index db4c791b2e2f..48fd1a1feea3 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -72,7 +72,7 @@
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -945,7 +945,7 @@
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 516f0d2495e2..950adb63af70 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -738,7 +738,7 @@
 
 				xoadc: xoadc@197 {
 					compatible = "qcom,pm8921-adc";
-					reg = <197>;
+					reg = <0x197>;
 					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
 					#address-cells = <2>;
 					#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 6788ddb9cbc8..d7e508776f6a 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 
 /delete-node/ &mpss_region;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
index 116e59a3b76d..1df24c922be9 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
index c6b6680248a6..d4e6aee034af 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003dac25..dac3aa793f71 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -76,7 +76,7 @@
 	};
 };
 
-&pmicgpio {
+&pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index fc4f52f9e9f7..c0a60bae703b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -47,14 +47,12 @@
 		};
 	};
 
-	regulators {
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
 	};
 
 	soc: soc {
@@ -263,7 +261,7 @@
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic {
+			pm8018: pmic {
 				compatible = "qcom,pm8018", "qcom,pm8921";
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
@@ -274,38 +272,38 @@
 				pwrkey@1c {
 					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8018>;
 					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
 						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
 					pull-up;
 				};
 
-				pmicmpp: mpps@50 {
+				pm8018_mpps: mpps@50 {
 					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
+					gpio-ranges = <&pm8018_mpps 0 0 6>;
 				};
 
 				rtc@11d {
 					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8018>;
 					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
 				};
 
-				pmicgpio: gpio@150 {
+				pm8018_gpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
+					gpio-ranges = <&pm8018_gpio 0 0 6>;
 					#gpio-cells = <2>;
 				};
 			};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 44f3f0127fd7..78738371f634 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -404,8 +404,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..9217ced108c4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -80,13 +80,13 @@
 	 */
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
 	};
 
 	soc: soc {
@@ -390,7 +390,7 @@
 					row-hold = <91500>;
 				};
 
-				xoadc: xoadc@197 {
+				pm8058_xoadc: xoadc@197 {
 					compatible = "qcom,pm8058-adc";
 					reg = <0x197>;
 					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfddeae69..da99f770d4f5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f9094e53..23ae474698aa 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 706fef53767e..4a8eb8b42329 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -1194,7 +1194,7 @@
 
 		qfprom: qfprom@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
+			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b75dad..6c4153689b39 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e1d95d..c0ca264d8140 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c86591ee2..325feb89b343 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/leds/common.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1409f7..0798cce3dbea 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
index 7e97ad5803d8..247069361909 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 51058b065279..082f7ed1a01f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e70692..e336a15b45c4 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 55ce87b75253..f9ad5abfbd28 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -345,10 +345,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -592,10 +592,10 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -619,7 +619,7 @@
 			compatible = "qcom,sdx55-pdc", "qcom,pdc";
 			reg = <0x0b210000 0x30000>;
 			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
 		};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index fcf1c51c5e7a..b87c5434cc29 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
 #include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 1a3583029a64..271899c861c0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -338,7 +338,7 @@
 			power-domains = <&gcc PCIE_GDSC>;
 
 			phys = <&pcie_phy>;
-			phy-names = "pcie-phy";
+			phy-names = "pciephy";
 
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -530,7 +530,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
 				<0xc600000 0x2000000>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
index e81a7213d304..4282bafbb504 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
@@ -209,6 +209,18 @@
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi
index c39066967053..d1f4cbd099ef 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a73a4.dtsi
@@ -450,17 +450,20 @@
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 5ad5349a50dc..ab7e9fa90b9f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -437,6 +437,7 @@
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index fe14727eefe1..25956661a875 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -332,6 +332,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index 26a40782cc89..4a76be68887b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -800,6 +800,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index ec0a20d5130d..fcc9a2313e1d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -389,6 +389,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index c66de9dd12df..20963c9bbf0a 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -239,7 +239,7 @@
 	};
 
 	keyboard_pins: keyboard {
-		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
+		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
 		bias-pull-up;
 	};
 
@@ -330,6 +330,7 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 79b537b24642..9358fc7d0e9f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -735,6 +735,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 4d93319674c6..3a9db455ddec 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -458,6 +458,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b7af1befa126..b825f2e25dd0 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -424,6 +424,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 78686fc72ce6..c420c7c642cb 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -402,12 +402,20 @@
 		pinctrl-0 = <&hdmi_ctl>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
index de9915d946f7..b98d5e357baf 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3066a.dtsi
@@ -123,6 +123,7 @@
 		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
 		power-domains = <&power RK3066_PD_VIO>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 88a4b0d6d928..80d81af5fe0e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -795,7 +795,7 @@
 			};
 
 			sdmmc_pwren: sdmmc-pwren {
-				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>;
+				rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_default>;
 			};
 
 			sdmmc_bus4: sdmmc-bus4 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
index ffc16d6b97e1..03d9baddcbab 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -732,14 +732,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop: endpoint@0 {
-					reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
+				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
index cb9cdaddffd4..8593a8359937 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -1231,27 +1231,37 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
-		#sound-dai-cells = <0>;
-		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
 		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				hdmi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_hdmi>;
 				};
+
 				hdmi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a84..f3291f3bbc6f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
index f775b9377a38..7f981b5c0d64 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4.dtsi
@@ -203,16 +203,16 @@
 
 		camera: camera@11800000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0x11800000 0xa0000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			fimc_0: fimc@11800000 {
+			fimc_0: fimc@0 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
+				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC0>,
 					 <&clock CLK_SCLK_FIMC0>;
@@ -223,9 +223,9 @@
 				status = "disabled";
 			};
 
-			fimc_1: fimc@11810000 {
+			fimc_1: fimc@10000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
+				reg = <0x00010000 0x1000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC1>,
 					 <&clock CLK_SCLK_FIMC1>;
@@ -236,9 +236,9 @@
 				status = "disabled";
 			};
 
-			fimc_2: fimc@11820000 {
+			fimc_2: fimc@20000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
+				reg = <0x00020000 0x1000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC2>,
 					 <&clock CLK_SCLK_FIMC2>;
@@ -249,9 +249,9 @@
 				status = "disabled";
 			};
 
-			fimc_3: fimc@11830000 {
+			fimc_3: fimc@30000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
+				reg = <0x00030000 0x1000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC3>,
 					 <&clock CLK_SCLK_FIMC3>;
@@ -262,9 +262,9 @@
 				status = "disabled";
 			};
 
-			csis_0: csis@11880000 {
+			csis_0: csis@80000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
+				reg = <0x00080000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS0>,
 					 <&clock CLK_SCLK_CSIS0>;
@@ -278,9 +278,9 @@
 				#size-cells = <0>;
 			};
 
-			csis_1: csis@11890000 {
+			csis_1: csis@90000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
+				reg = <0x00090000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS1>,
 					 <&clock CLK_SCLK_CSIS1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index a9ec1f6c1dea..a076a1dfe41f 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -527,6 +527,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
index b566f878ed84..18f4f494093b 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
@@ -88,7 +88,7 @@
 &keypad {
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index ce81e42bf5eb..39469b708f91 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -435,6 +435,7 @@
 };
 
 &fimd {
+	samsung,invert-vclk;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts
index 23b151645d66..10ab7bc90f50 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4412-origen.dts
@@ -453,7 +453,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
index 715dfcba1417..e16df9e75fcb 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
@@ -69,7 +69,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
index 84c1db221c98..83d9d0a0a617 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/exynos4x12.dtsi
@@ -451,14 +451,15 @@
 };
 
 &camera {
+	ranges = <0x0 0x11800000 0xba1000>;
 	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
 		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
+	fimc_lite_0: fimc-lite@b90000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
+		reg = <0x00b90000 0x1000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
@@ -467,9 +468,9 @@
 		status = "disabled";
 	};
 
-	fimc_lite_1: fimc-lite@123a0000 {
+	fimc_lite_1: fimc-lite@ba0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
+		reg = <0x00ba0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -478,9 +479,9 @@
 		status = "disabled";
 	};
 
-	fimc_is: fimc-is@12000000 {
+	fimc_is: fimc-is@800000 {
 		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
+		reg = <0x00800000 0x260000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
@@ -525,9 +526,9 @@
 			reg = <0x10020000 0x3000>;
 		};
 
-		i2c1_isp: i2c-isp@12140000 {
+		i2c1_isp: i2c-isp@940000 {
 			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
+			reg = <0x00940000 0x100>;
 			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
 			clock-names = "i2c_isp";
 			#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
index f7de5b5f2f38..ed560c9a3aa1 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/samsung/s5pv210.dtsi
@@ -549,17 +549,17 @@
 
 		camera: camera@fa600000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0xfa600000 0xe01000>;
 			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
 			clock-names = "sclk_cam0", "sclk_cam1";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			csis0: csis@fa600000 {
+			csis0: csis@0 {
 				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
+				reg = <0x00000000 0x4000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
@@ -572,9 +572,9 @@
 				#size-cells = <0>;
 			};
 
-			fimc0: fimc@fb200000 {
+			fimc0: fimc@c00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
+				reg = <0x00c00000 0x1000>;
 				interrupts = <5>;
 				interrupt-parent = <&vic2>;
 				clocks = <&clocks CLK_FIMC0>,
@@ -586,9 +586,9 @@
 				samsung,cam-if;
 			};
 
-			fimc1: fimc@fb300000 {
+			fimc1: fimc@d00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
+				reg = <0x00d00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <6>;
 				clocks = <&clocks CLK_FIMC1>,
@@ -602,9 +602,9 @@
 				samsung,lcd-wb;
 			};
 
-			fimc2: fimc@fb400000 {
+			fimc2: fimc@e00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
+				reg = <0x00e00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <7>;
 				clocks = <&clocks CLK_FIMC2>,
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
index 576235ec3c51..afa417b34b25 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
index 65480a9f5cc4..842f2b17c4a8 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
@@ -376,7 +376,6 @@
 				};
 			};
 
-
 			ltdc_pins_a: ltdc-0 {
 				pins {
 					pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
index 61508917521c..aec7fa5ab5d8 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -50,6 +50,7 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
+		arm,no-tick-in-suspend;
 	};
 
 	clocks {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
index afcd6285890c..c27963898b5e 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
-	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
index 39358d902000..622618943134 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
-	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 510cca5acb79..7a701f7ef0c7 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
index 07ea765a4553..c7c4d7e89d61 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
-	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
index 813086ec2489..2ab77e64f1bb 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
@@ -11,8 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
-		     "st,stm32mp157";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
index b8730aa52ce6..a59331aa58e5 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
 
-	tpm_spi_tis@0 {
+	tpm@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi
index 1a2cd5baf402..5b9e01a8aa5d 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am33xx.dtsi
@@ -359,6 +359,7 @@
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
 			clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts
index af9df15274be..866f68c5b504 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am3517-evm.dts
@@ -271,13 +271,6 @@
 		>;
 	};
 
-	leds_pins: leds-pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
-			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
-		>;
-	};
-
 	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -355,3 +348,12 @@
 		>;
 	};
 };
+
+&omap3_pmx_wkup {
+	leds_pins: leds-pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+};
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 9a234dc1431d..5b240769d300 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -415,7 +415,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi
index 3f3e52e3b375..6509c742fb58 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/dra7.dtsi
@@ -147,7 +147,7 @@
 
 		l3-noc@44000000 {
 			compatible = "ti,dra7-l3-noc";
-			reg = <0x44000000 0x1000>,
+			reg = <0x44000000 0x1000000>,
 			      <0x45000000 0x1000>;
 			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
index d33485341251..036e472b77be 100644
--- linux-libre-6.6-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
+++ linux-libre-6.6.50-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
@@ -781,7 +781,7 @@
 
 		mount-matrix =	 "-1",  "0",  "0",
 				  "0",  "1",  "0",
-				  "0",  "0",  "1";
+				  "0",  "0",  "-1";
 	};
 
 	cam1: camera@3e {
diff --git linux-libre-6.6-gnu/arch/arm/configs/imx_v6_v7_defconfig linux-libre-6.6.50-gnu/arch/arm/configs/imx_v6_v7_defconfig
index 0a90583f9f01..8f9dbe8d9029 100644
--- linux-libre-6.6-gnu/arch/arm/configs/imx_v6_v7_defconfig
+++ linux-libre-6.6.50-gnu/arch/arm/configs/imx_v6_v7_defconfig
@@ -297,6 +297,7 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git linux-libre-6.6-gnu/arch/arm/configs/sunxi_defconfig linux-libre-6.6.50-gnu/arch/arm/configs/sunxi_defconfig
index bddc82f78942..a83d29fed175 100644
--- linux-libre-6.6-gnu/arch/arm/configs/sunxi_defconfig
+++ linux-libre-6.6.50-gnu/arch/arm/configs/sunxi_defconfig
@@ -110,6 +110,7 @@ CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
+CONFIG_DRM_DW_HDMI=y
 CONFIG_DRM_LIMA=y
 CONFIG_FB_SIMPLE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
diff --git linux-libre-6.6-gnu/arch/arm/crypto/sha256_glue.c linux-libre-6.6.50-gnu/arch/arm/crypto/sha256_glue.c
index 433ee4ddce6c..f85933fdec75 100644
--- linux-libre-6.6-gnu/arch/arm/crypto/sha256_glue.c
+++ linux-libre-6.6.50-gnu/arch/arm/crypto/sha256_glue.c
@@ -24,8 +24,8 @@
 
 #include "sha256_glue.h"
 
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
+asmlinkage void sha256_block_data_order(struct sha256_state *state,
+					const u8 *data, int num_blks);
 
 int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
@@ -33,23 +33,20 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 	/* make sure casting to sha256_block_fn() is safe */
 	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
 
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
 static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc, sha256_block_data_order);
 	return sha256_base_finish(desc, out);
 }
 
 int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 			    unsigned int len, u8 *out)
 {
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_update(desc, data, len, sha256_block_data_order);
 	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);
diff --git linux-libre-6.6-gnu/arch/arm/crypto/sha512-glue.c linux-libre-6.6.50-gnu/arch/arm/crypto/sha512-glue.c
index 0635a65aa488..1be5bd498af3 100644
--- linux-libre-6.6-gnu/arch/arm/crypto/sha512-glue.c
+++ linux-libre-6.6.50-gnu/arch/arm/crypto/sha512-glue.c
@@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512");
 MODULE_ALIAS_CRYPTO("sha384-arm");
 MODULE_ALIAS_CRYPTO("sha512-arm");
 
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
+asmlinkage void sha512_block_data_order(struct sha512_state *state,
+					u8 const *src, int blocks);
 
 int sha512_arm_update(struct shash_desc *desc, const u8 *data,
 		      unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
 }
 
 static int sha512_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
 int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
 		     unsigned int len, u8 *out)
 {
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_update(desc, data, len, sha512_block_data_order);
 	return sha512_arm_final(desc, out);
 }
 
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/arm_pmuv3.h linux-libre-6.6.50-gnu/arch/arm/include/asm/arm_pmuv3.h
index 72529f5e2bed..a41b503b7dcd 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/arm_pmuv3.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/arm_pmuv3.h
@@ -23,6 +23,8 @@
 #define PMUSERENR		__ACCESS_CP15(c9,  0, c14, 0)
 #define PMINTENSET		__ACCESS_CP15(c9,  0, c14, 1)
 #define PMINTENCLR		__ACCESS_CP15(c9,  0, c14, 2)
+#define PMCEID2			__ACCESS_CP15(c9,  0, c14, 4)
+#define PMCEID3			__ACCESS_CP15(c9,  0, c14, 5)
 #define PMMIR			__ACCESS_CP15(c9,  0, c14, 6)
 #define PMCCFILTR		__ACCESS_CP15(c14, 0, c15, 7)
 
@@ -150,21 +152,6 @@ static inline u64 read_pmccntr(void)
 	return read_sysreg(PMCCNTR);
 }
 
-static inline void write_pmxevcntr(u32 val)
-{
-	write_sysreg(val, PMXEVCNTR);
-}
-
-static inline u32 read_pmxevcntr(void)
-{
-	return read_sysreg(PMXEVCNTR);
-}
-
-static inline void write_pmxevtyper(u32 val)
-{
-	write_sysreg(val, PMXEVTYPER);
-}
-
 static inline void write_pmcntenset(u32 val)
 {
 	write_sysreg(val, PMCNTENSET);
@@ -205,16 +192,6 @@ static inline void write_pmuserenr(u32 val)
 	write_sysreg(val, PMUSERENR);
 }
 
-static inline u32 read_pmceid0(void)
-{
-	return read_sysreg(PMCEID0);
-}
-
-static inline u32 read_pmceid1(void)
-{
-	return read_sysreg(PMCEID1);
-}
-
 static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
 static inline void kvm_clr_pmu_events(u32 clr) {}
 static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
@@ -231,6 +208,7 @@ static inline void kvm_vcpu_pmu_resync_el0(void) {}
 
 /* PMU Version in DFR Register */
 #define ARMV8_PMU_DFR_VER_NI        0
+#define ARMV8_PMU_DFR_VER_V3P1      0x4
 #define ARMV8_PMU_DFR_VER_V3P4      0x5
 #define ARMV8_PMU_DFR_VER_V3P5      0x6
 #define ARMV8_PMU_DFR_VER_IMP_DEF   0xF
@@ -251,4 +229,24 @@ static inline bool is_pmuv3p5(int pmuver)
 	return pmuver >= ARMV8_PMU_DFR_VER_V3P5;
 }
 
+static inline u64 read_pmceid0(void)
+{
+	u64 val = read_sysreg(PMCEID0);
+
+	if (read_pmuver() >= ARMV8_PMU_DFR_VER_V3P1)
+		val |= (u64)read_sysreg(PMCEID2) << 32;
+
+	return val;
+}
+
+static inline u64 read_pmceid1(void)
+{
+	u64 val = read_sysreg(PMCEID1);
+
+	if (read_pmuver() >= ARMV8_PMU_DFR_VER_V3P1)
+		val |= (u64)read_sysreg(PMCEID3) << 32;
+
+	return val;
+}
+
 #endif
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/cacheflush.h linux-libre-6.6.50-gnu/arch/arm/include/asm/cacheflush.h
index f6181f69577f..1075534b0a2e 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/cacheflush.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/cacheflush.h
@@ -340,6 +340,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		dsb(ishst);
 }
 
+#define flush_cache_vmap_early(start, end)	do { } while (0)
+
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
 {
 	if (!cache_is_vipt_nonaliasing())
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/dma.h linux-libre-6.6.50-gnu/arch/arm/include/asm/dma.h
index c6aded1b069c..e2a1916013e7 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/dma.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/dma.h
@@ -12,6 +12,9 @@
 	extern phys_addr_t arm_dma_zone_size; \
 	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
+
+extern phys_addr_t arm_dma_limit;
+#define ARCH_LOW_ADDRESS_LIMIT arm_dma_limit
 #endif
 
 #ifdef CONFIG_ISA_DMA_API
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/exception.h linux-libre-6.6.50-gnu/arch/arm/include/asm/exception.h
index 58e039a851af..3c82975d46db 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/exception.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/exception.h
@@ -10,10 +10,6 @@
 
 #include <linux/interrupt.h>
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 #define __exception_irq_entry	__irq_entry
-#else
-#define __exception_irq_entry
-#endif
 
 #endif /* __ASM_ARM_EXCEPTION_H */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/irq_work.h linux-libre-6.6.50-gnu/arch/arm/include/asm/irq_work.h
index 3149e4dc1b54..8895999834cc 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/irq_work.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/irq_work.h
@@ -9,6 +9,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
-extern void arch_irq_work_raise(void);
-
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/jump_label.h linux-libre-6.6.50-gnu/arch/arm/include/asm/jump_label.h
index e12d7d096fc0..e4eb54f6cd9f 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/jump_label.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/jump_label.h
@@ -11,7 +11,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(nop) "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
@@ -25,7 +25,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(b) " %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/kexec.h linux-libre-6.6.50-gnu/arch/arm/include/asm/kexec.h
index e62832dcba76..a8287e7ab9d4 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/kexec.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/kexec.h
@@ -2,8 +2,6 @@
 #ifndef _ARM_KEXEC_H
 #define _ARM_KEXEC_H
 
-#ifdef CONFIG_KEXEC
-
 /* Maximum physical address we can use pages from */
 #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
 /* Maximum address we can reach in physical address mode */
@@ -82,6 +80,4 @@ static inline struct page *boot_pfn_to_page(unsigned long boot_pfn)
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* CONFIG_KEXEC */
-
 #endif /* _ARM_KEXEC_H */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/mman.h linux-libre-6.6.50-gnu/arch/arm/include/asm/mman.h
new file mode 100644
index 000000000000..2189e507c8e0
--- /dev/null
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/mman.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <asm/system_info.h>
+#include <uapi/asm/mman.h>
+
+static inline bool arch_memory_deny_write_exec_supported(void)
+{
+	return cpu_architecture() >= CPU_ARCH_ARMv6;
+}
+#define arch_memory_deny_write_exec_supported arch_memory_deny_write_exec_supported
+
+#endif /* __ASM_MMAN_H__ */
diff --git linux-libre-6.6-gnu/arch/arm/include/asm/uaccess.h linux-libre-6.6.50-gnu/arch/arm/include/asm/uaccess.h
index bb5c81823117..c28f5ec21e41 100644
--- linux-libre-6.6-gnu/arch/arm/include/asm/uaccess.h
+++ linux-libre-6.6.50-gnu/arch/arm/include/asm/uaccess.h
@@ -109,16 +109,6 @@ extern int __get_user_64t_1(void *);
 extern int __get_user_64t_2(void *);
 extern int __get_user_64t_4(void *);
 
-#define __GUP_CLOBBER_1	"lr", "cc"
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define __GUP_CLOBBER_2	"ip", "lr", "cc"
-#else
-#define __GUP_CLOBBER_2 "lr", "cc"
-#endif
-#define __GUP_CLOBBER_4	"lr", "cc"
-#define __GUP_CLOBBER_32t_8 "lr", "cc"
-#define __GUP_CLOBBER_8	"lr", "cc"
-
 #define __get_user_x(__r2, __p, __e, __l, __s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
@@ -126,7 +116,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 
 /* narrowing a double-word get into a single 32bit word register: */
 #ifdef __ARMEB__
@@ -148,7 +138,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_64t_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 #else
 #define __get_user_x_64t __get_user_x
 #endif
diff --git linux-libre-6.6-gnu/arch/arm/kernel/Makefile linux-libre-6.6.50-gnu/arch/arm/kernel/Makefile
index d53f56d6f840..ae2f2b2b4e5a 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/Makefile
+++ linux-libre-6.6.50-gnu/arch/arm/kernel/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_FUNCTION_TRACER)	+= entry-ftrace.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o patch.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o patch.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec.o relocate_kernel.o
 # Main staffs in KPROBES are in arch/arm/probes/ .
 obj-$(CONFIG_KPROBES)		+= patch.o insn.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
@@ -75,8 +75,6 @@ obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
-obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
-obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o perf_callchain.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_xscale.o perf_event_v6.o \
diff --git linux-libre-6.6-gnu/arch/arm/kernel/iwmmxt.S linux-libre-6.6.50-gnu/arch/arm/kernel/iwmmxt.S
index a0218c4867b9..4a335d3c5969 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/iwmmxt.S
+++ linux-libre-6.6.50-gnu/arch/arm/kernel/iwmmxt.S
@@ -18,18 +18,6 @@
 #include <asm/assembler.h>
 #include "iwmmxt.h"
 
-#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
-#define PJ4(code...)		code
-#define XSC(code...)
-#elif defined(CONFIG_CPU_MOHAWK) || \
-	defined(CONFIG_CPU_XSC3) || \
-	defined(CONFIG_CPU_XSCALE)
-#define PJ4(code...)
-#define XSC(code...)		code
-#else
-#error "Unsupported iWMMXt architecture"
-#endif
-
 #define MMX_WR0		 	(0x00)
 #define MMX_WR1		 	(0x08)
 #define MMX_WR2		 	(0x10)
@@ -81,17 +69,13 @@ ENDPROC(iwmmxt_undef_handler)
 ENTRY(iwmmxt_task_enable)
 	inc_preempt_count r10, r3
 
-	XSC(mrc	p15, 0, r2, c15, c1, 0)
-	PJ4(mrc p15, 0, r2, c1, c0, 2)
+	mrc	p15, 0, r2, c15, c1, 0
 	@ CP0 and CP1 accessible?
-	XSC(tst	r2, #0x3)
-	PJ4(tst	r2, #0xf)
+	tst	r2, #0x3
 	bne	4f				@ if so no business here
 	@ enable access to CP0 and CP1
-	XSC(orr	r2, r2, #0x3)
-	XSC(mcr	p15, 0, r2, c15, c1, 0)
-	PJ4(orr	r2, r2, #0xf)
-	PJ4(mcr	p15, 0, r2, c1, c0, 2)
+	orr	r2, r2, #0x3
+	mcr	p15, 0, r2, c15, c1, 0
 
 	ldr	r3, =concan_owner
 	ldr	r2, [r0, #S_PC]			@ current task pc value
@@ -218,12 +202,9 @@ ENTRY(iwmmxt_task_disable)
 	bne	1f				@ no: quit
 
 	@ enable access to CP0 and CP1
-	XSC(mrc	p15, 0, r4, c15, c1, 0)
-	XSC(orr	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(mrc p15, 0, r4, c1, c0, 2)
-	PJ4(orr	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+	mrc	p15, 0, r4, c15, c1, 0
+	orr	r4, r4, #0x3
+	mcr	p15, 0, r4, c15, c1, 0
 
 	mov	r0, #0				@ nothing to load
 	str	r0, [r3]			@ no more current owner
@@ -232,10 +213,8 @@ ENTRY(iwmmxt_task_disable)
 	bl	concan_save
 
 	@ disable access to CP0 and CP1
-	XSC(bic	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(bic	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+	bic	r4, r4, #0x3
+	mcr	p15, 0, r4, c15, c1, 0
 
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
@@ -330,11 +309,9 @@ ENDPROC(iwmmxt_task_restore)
  */
 ENTRY(iwmmxt_task_switch)
 
-	XSC(mrc	p15, 0, r1, c15, c1, 0)
-	PJ4(mrc	p15, 0, r1, c1, c0, 2)
+	mrc	p15, 0, r1, c15, c1, 0
 	@ CP0 and CP1 accessible?
-	XSC(tst	r1, #0x3)
-	PJ4(tst	r1, #0xf)
+	tst	r1, #0x3
 	bne	1f				@ yes: block them for next task
 
 	ldr	r2, =concan_owner
@@ -344,10 +321,8 @@ ENTRY(iwmmxt_task_switch)
 	retne	lr				@ no: leave Concan disabled
 
 1:	@ flip Concan access
-	XSC(eor	r1, r1, #0x3)
-	XSC(mcr	p15, 0, r1, c15, c1, 0)
-	PJ4(eor r1, r1, #0xf)
-	PJ4(mcr	p15, 0, r1, c1, c0, 2)
+	eor	r1, r1, #0x3
+	mcr	p15, 0, r1, c15, c1, 0
 
 	mrc	p15, 0, r1, c2, c0, 0
 	sub	pc, lr, r1, lsr #32		@ cpwait and return
diff --git linux-libre-6.6-gnu/arch/arm/kernel/perf_callchain.c linux-libre-6.6.50-gnu/arch/arm/kernel/perf_callchain.c
index 7147edbe56c6..1d230ac9d0eb 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/perf_callchain.c
+++ linux-libre-6.6.50-gnu/arch/arm/kernel/perf_callchain.c
@@ -85,8 +85,7 @@ static bool
 callchain_trace(void *data, unsigned long pc)
 {
 	struct perf_callchain_entry_ctx *entry = data;
-	perf_callchain_store(entry, pc);
-	return true;
+	return perf_callchain_store(entry, pc) == 0;
 }
 
 void
diff --git linux-libre-6.6-gnu/arch/arm/kernel/pj4-cp0.c linux-libre-6.6.50-gnu/arch/arm/kernel/pj4-cp0.c
deleted file mode 100644
index 4bca8098c4ff..000000000000
--- linux-libre-6.6-gnu/arch/arm/kernel/pj4-cp0.c
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/kernel/pj4-cp0.c
- *
- * PJ4 iWMMXt coprocessor context switching and handling
- *
- * Copyright (c) 2010 Marvell International Inc.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/thread_notify.h>
-#include <asm/cputype.h>
-
-static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		/*
-		 * flush_thread() zeroes thread->fpstate, so no need
-		 * to do anything here.
-		 *
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_EXIT:
-		iwmmxt_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		iwmmxt_task_switch(thread);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block __maybe_unused iwmmxt_notifier_block = {
-	.notifier_call	= iwmmxt_do,
-};
-
-
-static u32 __init pj4_cp_access_read(void)
-{
-	u32 value;
-
-	__asm__ __volatile__ (
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		: "=r" (value));
-	return value;
-}
-
-static void __init pj4_cp_access_write(u32 value)
-{
-	u32 temp;
-
-	__asm__ __volatile__ (
-		"mcr	p15, 0, %1, c1, c0, 2\n\t"
-#ifdef CONFIG_THUMB2_KERNEL
-		"isb\n\t"
-#else
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		"mov	%0, %0\n\t"
-		"sub	pc, pc, #4\n\t"
-#endif
-		: "=r" (temp) : "r" (value));
-}
-
-static int __init pj4_get_iwmmxt_version(void)
-{
-	u32 cp_access, wcid;
-
-	cp_access = pj4_cp_access_read();
-	pj4_cp_access_write(cp_access | 0xf);
-
-	/* check if coprocessor 0 and 1 are available */
-	if ((pj4_cp_access_read() & 0xf) != 0xf) {
-		pj4_cp_access_write(cp_access);
-		return -ENODEV;
-	}
-
-	/* read iWMMXt coprocessor id register p1, c0 */
-	__asm__ __volatile__ ("mrc    p1, 0, %0, c0, c0, 0\n" : "=r" (wcid));
-
-	pj4_cp_access_write(cp_access);
-
-	/* iWMMXt v1 */
-	if ((wcid & 0xffffff00) == 0x56051000)
-		return 1;
-	/* iWMMXt v2 */
-	if ((wcid & 0xffffff00) == 0x56052000)
-		return 2;
-
-	return -EINVAL;
-}
-
-/*
- * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
- * switch code handle iWMMXt context switching.
- */
-static int __init pj4_cp0_init(void)
-{
-	u32 __maybe_unused cp_access;
-	int vers;
-
-	if (!cpu_is_pj4())
-		return 0;
-
-	vers = pj4_get_iwmmxt_version();
-	if (vers < 0)
-		return 0;
-
-#ifndef CONFIG_IWMMXT
-	pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n");
-#else
-	cp_access = pj4_cp_access_read() & ~0xf;
-	pj4_cp_access_write(cp_access);
-
-	pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers);
-	elf_hwcap |= HWCAP_IWMMXT;
-	thread_register_notifier(&iwmmxt_notifier_block);
-	register_iwmmxt_undef_handler();
-#endif
-
-	return 0;
-}
-
-late_initcall(pj4_cp0_init);
diff --git linux-libre-6.6-gnu/arch/arm/kernel/sleep.S linux-libre-6.6.50-gnu/arch/arm/kernel/sleep.S
index a86a1d4f3461..93afd1005b43 100644
--- linux-libre-6.6-gnu/arch/arm/kernel/sleep.S
+++ linux-libre-6.6.50-gnu/arch/arm/kernel/sleep.S
@@ -127,6 +127,10 @@ cpu_resume_after_mmu:
 	instr_sync
 #endif
 	bl	cpu_init		@ restore the und/abt/irq banked regs
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	mov	r0, sp
+	bl	kasan_unpoison_task_stack_below
+#endif
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_resume_after_mmu)
diff --git linux-libre-6.6-gnu/arch/arm/lib/memset.S linux-libre-6.6.50-gnu/arch/arm/lib/memset.S
index d71ab61430b2..de75ae4d5ab4 100644
--- linux-libre-6.6-gnu/arch/arm/lib/memset.S
+++ linux-libre-6.6.50-gnu/arch/arm/lib/memset.S
@@ -17,6 +17,7 @@ ENTRY(__memset)
 ENTRY(mmioset)
 WEAK(memset)
 UNWIND( .fnstart         )
+	and	r1, r1, #255		@ cast to unsigned char
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
 	bne	6f			@ 1
diff --git linux-libre-6.6-gnu/arch/arm/mach-davinci/Kconfig linux-libre-6.6.50-gnu/arch/arm/mach-davinci/Kconfig
index 4316e1370627..2a8a9fe46586 100644
--- linux-libre-6.6-gnu/arch/arm/mach-davinci/Kconfig
+++ linux-libre-6.6.50-gnu/arch/arm/mach-davinci/Kconfig
@@ -4,12 +4,14 @@ menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
+	select PINCTRL
 	select PINCTRL_SINGLE
 
 if ARCH_DAVINCI
diff --git linux-libre-6.6-gnu/arch/arm/mach-davinci/pm.c linux-libre-6.6.50-gnu/arch/arm/mach-davinci/pm.c
index 8aa39db095d7..2c5155bd376b 100644
--- linux-libre-6.6-gnu/arch/arm/mach-davinci/pm.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-davinci/pm.c
@@ -61,7 +61,7 @@ static void davinci_pm_suspend(void)
 
 	/* Configure sleep count in deep sleep register */
 	val = __raw_readl(pm_config.deepsleep_reg);
-	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
+	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK;
 	val |= pm_config.sleepcount;
 	__raw_writel(val, pm_config.deepsleep_reg);
 
diff --git linux-libre-6.6-gnu/arch/arm/mach-ep93xx/core.c linux-libre-6.6.50-gnu/arch/arm/mach-ep93xx/core.c
index 71b113976420..8b1ec60a9a46 100644
--- linux-libre-6.6-gnu/arch/arm/mach-ep93xx/core.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-ep93xx/core.c
@@ -339,6 +339,7 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP_IDX("G", 0, NULL, 1,
 				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git linux-libre-6.6-gnu/arch/arm/mach-imx/mmdc.c linux-libre-6.6.50-gnu/arch/arm/mach-imx/mmdc.c
index 2157493b78a9..df69af932375 100644
--- linux-libre-6.6-gnu/arch/arm/mach-imx/mmdc.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-imx/mmdc.c
@@ -501,6 +501,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 	name = devm_kasprintf(&pdev->dev,
 				GFP_KERNEL, "mmdc%d", ret);
+	if (!name) {
+		ret = -ENOMEM;
+		goto pmu_release_id;
+	}
 
 	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
@@ -523,9 +527,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
-	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
+pmu_release_id:
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 pmu_free:
 	kfree(pmu_mmdc);
 	return ret;
diff --git linux-libre-6.6-gnu/arch/arm/mach-omap2/board-n8x0.c linux-libre-6.6.50-gnu/arch/arm/mach-omap2/board-n8x0.c
index 8e3b5068d4ab..b45a3879eb34 100644
--- linux-libre-6.6-gnu/arch/arm/mach-omap2/board-n8x0.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-omap2/board-n8x0.c
@@ -79,10 +79,8 @@ static struct musb_hdrc_platform_data tusb_data = {
 static struct gpiod_lookup_table tusb_gpio_table = {
 	.dev_id = "musb-tusb",
 	.table = {
-		GPIO_LOOKUP("gpio-0-15", 0, "enable",
-			    GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-48-63", 10, "int",
-			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-31", 0, "enable", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-32-63", 26, "int", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -140,12 +138,11 @@ static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
-static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
 		/* Slot switch, GPIO 96 */
-		GPIO_LOOKUP("gpio-80-111", 16,
-			    "switch", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -153,12 +150,12 @@ static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
 static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VSD power, GPIO 23 */
-		GPIO_LOOKUP_IDX("gpio-16-31", 7,
-				"vsd", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VIO power, GPIO 9 */
-		GPIO_LOOKUP_IDX("gpio-0-15", 9,
-				"vio", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -415,8 +412,6 @@ static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
 static void __init n8x0_mmc_init(void)
 {
-	gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
-
 	if (board_is_n810()) {
 		mmc1_data.slots[0].name = "external";
 
@@ -429,6 +424,8 @@ static void __init n8x0_mmc_init(void)
 		mmc1_data.slots[1].name = "internal";
 		mmc1_data.slots[1].ban_openended = 1;
 		gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
+	} else {
+		gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
 	}
 
 	mmc1_data.nr_slots = 2;
diff --git linux-libre-6.6-gnu/arch/arm/mach-omap2/id.c linux-libre-6.6.50-gnu/arch/arm/mach-omap2/id.c
index 98999aa8cc0c..7f387706368a 100644
--- linux-libre-6.6-gnu/arch/arm/mach-omap2/id.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-omap2/id.c
@@ -793,11 +793,16 @@ void __init omap_soc_device_init(void)
 
 	soc_dev_attr->machine  = soc_name;
 	soc_dev_attr->family   = omap_get_family();
+	if (!soc_dev_attr->family) {
+		kfree(soc_dev_attr);
+		return;
+	}
 	soc_dev_attr->revision = soc_rev;
 	soc_dev_attr->custom_attr_group = omap_soc_groups[0];
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
 		kfree(soc_dev_attr);
 		return;
 	}
diff --git linux-libre-6.6-gnu/arch/arm/mach-omap2/pdata-quirks.c linux-libre-6.6.50-gnu/arch/arm/mach-omap2/pdata-quirks.c
index c1c0121f478d..b947bacf23a3 100644
--- linux-libre-6.6-gnu/arch/arm/mach-omap2/pdata-quirks.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-omap2/pdata-quirks.c
@@ -275,9 +275,19 @@ static struct platform_device pandora_backlight = {
 	.id	= -1,
 };
 
+static struct gpiod_lookup_table pandora_soc_audio_gpios = {
+	.dev_id = "soc-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-112-127", 6, "dac", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 14, "amp", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
+	gpiod_add_lookup_table(&pandora_soc_audio_gpios);
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
diff --git linux-libre-6.6-gnu/arch/arm/mach-pxa/spitz.c linux-libre-6.6.50-gnu/arch/arm/mach-pxa/spitz.c
index cc691b199429..a42417de53f7 100644
--- linux-libre-6.6-gnu/arch/arm/mach-pxa/spitz.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-pxa/spitz.c
@@ -520,10 +520,8 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 6, "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("sharp-scoop.1", 7, "BL_ON", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -531,10 +529,8 @@ static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 3, "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 4, "BL_CONT", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
@@ -941,12 +937,9 @@ static inline void spitz_i2c_init(void) {}
 static struct gpiod_lookup_table spitz_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 8, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -954,12 +947,9 @@ static struct gpiod_lookup_table spitz_audio_gpio_table = {
 static struct gpiod_lookup_table akita_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 2, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
diff --git linux-libre-6.6-gnu/arch/arm/mach-sunxi/mc_smp.c linux-libre-6.6.50-gnu/arch/arm/mach-sunxi/mc_smp.c
index cb63921232a6..277f6aa8e6c2 100644
--- linux-libre-6.6-gnu/arch/arm/mach-sunxi/mc_smp.c
+++ linux-libre-6.6.50-gnu/arch/arm/mach-sunxi/mc_smp.c
@@ -803,16 +803,16 @@ static int __init sunxi_mc_smp_init(void)
 	for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) {
 		ret = of_property_match_string(node, "enable-method",
 					       sunxi_mc_smp_data[i].enable_method);
-		if (!ret)
+		if (ret >= 0)
 			break;
 	}
 
-	is_a83t = sunxi_mc_smp_data[i].is_a83t;
-
 	of_node_put(node);
-	if (ret)
+	if (ret < 0)
 		return -ENODEV;
 
+	is_a83t = sunxi_mc_smp_data[i].is_a83t;
+
 	if (!sunxi_mc_smp_cpu_table_init())
 		return -EINVAL;
 
diff --git linux-libre-6.6-gnu/arch/arm/mm/flush.c linux-libre-6.6.50-gnu/arch/arm/mm/flush.c
index d19d140a10c7..0749cf8a6637 100644
--- linux-libre-6.6-gnu/arch/arm/mm/flush.c
+++ linux-libre-6.6.50-gnu/arch/arm/mm/flush.c
@@ -296,6 +296,9 @@ void __sync_icache_dcache(pte_t pteval)
 		return;
 
 	folio = page_folio(pfn_to_page(pfn));
+	if (folio_test_reserved(folio))
+		return;
+
 	if (cache_is_vipt_aliasing())
 		mapping = folio_flush_mapping(folio);
 	else
diff --git linux-libre-6.6-gnu/arch/arm/vdso/Makefile linux-libre-6.6.50-gnu/arch/arm/vdso/Makefile
index 515ca33b854c..d761bd2e2f40 100644
--- linux-libre-6.6-gnu/arch/arm/vdso/Makefile
+++ linux-libre-6.6.50-gnu/arch/arm/vdso/Makefile
@@ -63,28 +63,3 @@ quiet_cmd_vdsold_and_vdso_check = LD      $@
 
 quiet_cmd_vdsomunge = MUNGE   $@
       cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@
-
-#
-# Install the unstripped copy of vdso.so.dbg.  If our toolchain
-# supports build-id, install .build-id links as well.
-#
-# Cribbed from arch/x86/vdso/Makefile.
-#
-quiet_cmd_vdso_install = INSTALL $<
-define cmd_vdso_install
-	cp $< "$(MODLIB)/vdso/vdso.so"; \
-	if readelf -n $< | grep -q 'Build ID'; then \
-	  buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \
-	  first=`echo $$buildid | cut -b-2`; \
-	  last=`echo $$buildid | cut -b3-`; \
-	  mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \
-	  ln -sf "../../vdso.so" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \
-	fi
-endef
-
-$(MODLIB)/vdso: FORCE
-	@mkdir -p $(MODLIB)/vdso
-
-PHONY += vdso_install
-vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso
-	$(call cmd,vdso_install)
diff --git linux-libre-6.6-gnu/arch/arm/xen/enlighten.c linux-libre-6.6.50-gnu/arch/arm/xen/enlighten.c
index c392e18f1e43..a395b6c0aae2 100644
--- linux-libre-6.6-gnu/arch/arm/xen/enlighten.c
+++ linux-libre-6.6.50-gnu/arch/arm/xen/enlighten.c
@@ -164,9 +164,6 @@ static int xen_starting_cpu(unsigned int cpu)
 	BUG_ON(err);
 	per_cpu(xen_vcpu, cpu) = vcpup;
 
-	if (!xen_kernel_unmapped_at_usr())
-		xen_setup_runstate_info(cpu);
-
 after_register_vcpu_info:
 	enable_percpu_irq(xen_events_irq, 0);
 	return 0;
@@ -487,7 +484,8 @@ static int __init xen_guest_init(void)
 	 * for secondary CPUs as they are brought up.
 	 * For uniformity we use VCPUOP_register_vcpu_info even on cpu0.
 	 */
-	xen_vcpu_info = alloc_percpu(struct vcpu_info);
+	xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info),
+				       1 << fls(sizeof(struct vcpu_info) - 1));
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;
 
@@ -523,9 +521,6 @@ static int __init xen_guest_init(void)
 		return -EINVAL;
 	}
 
-	if (!xen_kernel_unmapped_at_usr())
-		xen_time_setup_guest();
-
 	if (xen_initial_domain())
 		pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
 
@@ -535,7 +530,13 @@ static int __init xen_guest_init(void)
 }
 early_initcall(xen_guest_init);
 
-static int __init xen_pm_init(void)
+static int xen_starting_runstate_cpu(unsigned int cpu)
+{
+	xen_setup_runstate_info(cpu);
+	return 0;
+}
+
+static int __init xen_late_init(void)
 {
 	if (!xen_domain())
 		return -ENODEV;
@@ -548,9 +549,16 @@ static int __init xen_pm_init(void)
 		do_settimeofday64(&ts);
 	}
 
-	return 0;
+	if (xen_kernel_unmapped_at_usr())
+		return 0;
+
+	xen_time_setup_guest();
+
+	return cpuhp_setup_state(CPUHP_AP_ARM_XEN_RUNSTATE_STARTING,
+				 "arm/xen_runstate:starting",
+				 xen_starting_runstate_cpu, NULL);
 }
-late_initcall(xen_pm_init);
+late_initcall(xen_late_init);
 
 
 /* empty stubs */
diff --git linux-libre-6.6-gnu/arch/arm64/Kconfig linux-libre-6.6.50-gnu/arch/arm64/Kconfig
index 78f20e632712..9e0c1ac3d13e 100644
--- linux-libre-6.6-gnu/arch/arm64/Kconfig
+++ linux-libre-6.6.50-gnu/arch/arm64/Kconfig
@@ -196,7 +196,7 @@ config ARM64
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
 		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
-		    !CC_OPTIMIZE_FOR_SIZE)
+		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_SAMPLE_FTRACE_DIRECT
@@ -1037,8 +1037,12 @@ config ARM64_ERRATUM_2645198
 
 	  If unsure, say Y.
 
+config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	bool
+
 config ARM64_ERRATUM_2966298
 	bool "Cortex-A520: 2966298: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	default y
 	help
 	  This option adds the workaround for ARM Cortex-A520 erratum 2966298.
@@ -1050,6 +1054,58 @@ config ARM64_ERRATUM_2966298
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_3117295
+	bool "Cortex-A510: 3117295: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 3117295.
+
+	  On an affected Cortex-A510 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_3194386
+	bool "Cortex-*/Neoverse-*: workaround for MSR SSBS not self-synchronizing"
+	default y
+	help
+	  This option adds the workaround for the following errata:
+
+	  * ARM Cortex-A76 erratum 3324349
+	  * ARM Cortex-A77 erratum 3324348
+	  * ARM Cortex-A78 erratum 3324344
+	  * ARM Cortex-A78C erratum 3324346
+	  * ARM Cortex-A78C erratum 3324347
+	  * ARM Cortex-A710 erratam 3324338
+	  * ARM Cortex-A720 erratum 3456091
+	  * ARM Cortex-A725 erratum 3456106
+	  * ARM Cortex-X1 erratum 3324344
+	  * ARM Cortex-X1C erratum 3324346
+	  * ARM Cortex-X2 erratum 3324338
+	  * ARM Cortex-X3 erratum 3324335
+	  * ARM Cortex-X4 erratum 3194386
+	  * ARM Cortex-X925 erratum 3324334
+	  * ARM Neoverse-N1 erratum 3324349
+	  * ARM Neoverse N2 erratum 3324339
+	  * ARM Neoverse-V1 erratum 3324341
+	  * ARM Neoverse V2 erratum 3324336
+	  * ARM Neoverse-V3 erratum 3312417
+
+	  On affected cores "MSR SSBS, #0" instructions may not affect
+	  subsequent speculative instructions, which may permit unexepected
+	  speculative store bypassing.
+
+	  Work around this problem by placing a Speculation Barrier (SB) or
+	  Instruction Synchronization Barrier (ISB) after kernel changes to
+	  SSBS. The presence of the SSBS special-purpose register is hidden
+	  from hwcaps and EL0 reads of ID_AA64PFR1_EL1, such that userspace
+	  will use the PR_SPEC_STORE_BYPASS prctl to change SSBS.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1368,6 +1424,8 @@ choice
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
 	depends on !LD_IS_LLD || LLD_VERSION >= 130000
+	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
+	depends on AS_IS_GNU || AS_VERSION >= 150000
 	help
 	  Say Y if you plan on running a kernel with a big-endian userspace.
 
diff --git linux-libre-6.6-gnu/arch/arm64/Makefile linux-libre-6.6.50-gnu/arch/arm64/Makefile
index 2d49aea0ff67..9a2d3723cd0f 100644
--- linux-libre-6.6-gnu/arch/arm64/Makefile
+++ linux-libre-6.6.50-gnu/arch/arm64/Makefile
@@ -158,7 +158,7 @@ endif
 
 all:	$(notdir $(KBUILD_IMAGE))
 
-
+vmlinuz.efi: Image
 Image vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
@@ -169,12 +169,6 @@ install: KBUILD_IMAGE := $(boot)/Image
 install zinstall:
 	$(call cmd,install)
 
-PHONY += vdso_install
-vdso_install:
-	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
-	$(if $(CONFIG_COMPAT_VDSO), \
-		$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
-
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
@@ -205,6 +199,9 @@ ifdef CONFIG_COMPAT_VDSO
 endif
 endif
 
+vdso-install-y				+= arch/arm64/kernel/vdso/vdso.so.dbg
+vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
+
 include $(srctree)/scripts/Makefile.defconf
 
 PHONY += virtconfig
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 9ec49ac2f6fd..381d58cea092 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -291,6 +291,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 4903d6358112..855b7d43bc50 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -166,6 +166,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index ca1d287a0a01..d11e5041bae9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -406,6 +406,7 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -655,10 +656,8 @@
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 15290e6892fc..fc7315b94406 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -68,10 +68,7 @@
 &emac0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
-	allwinner,rx-delay-ps = <3100>;
-	allwinner,tx-delay-ps = <700>;
 	status = "okay";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index d83852e72f06..b5d713926a34 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -13,6 +13,9 @@
 };
 
 &emac0 {
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii";
 	phy-supply = <&reg_dcdce>;
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index 00fe28caac93..b3b1b8692125 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -13,6 +13,8 @@
 };
 
 &emac0 {
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii-rxid";
 	phy-supply = <&reg_dldo1>;
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index dccbba6e7f98..dbf2dce8d1d6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 39481d7fd7d4..3ea178acdddf 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -355,7 +355,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index ff68b911b729..0ff0d090548d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -215,6 +215,11 @@
 				#sound-dai-cells = <0>;
 				status = "disabled";
 
+				assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+						  <&clkc CLKID_HDMI>;
+				assigned-clock-parents = <&xtal>, <0>;
+				assigned-clock-rates = <0>, <24000000>;
+
 				/* VPU VENC Input */
 				hdmi_tx_venc_port: port@0 {
 					reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 6a1f4dcf6488..7b655e07e80c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -367,6 +367,10 @@
 	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 12ef6e81c8bd..ed00e67e6923 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -311,10 +311,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 17bcfa4702e1..f58d1790de1c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -323,10 +323,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index 8ffbcb2b1ac5..bbd3c05cbd90 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -25,6 +25,6 @@
 
 };
 
-&uart_B {
+&uart_b {
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index f24460186d3d..a781eabe21f0 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -61,10 +61,15 @@
 		#clock-cells = <0>;
 	};
 
-	pwrc: power-controller {
-		compatible = "amlogic,meson-s4-pwrc";
-		#power-domain-cells = <1>;
-		status = "okay";
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+
+			pwrc: power-controller {
+				compatible = "amlogic,meson-s4-pwrc";
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	soc {
@@ -118,14 +123,14 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
-			uart_B: serial@7a000 {
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
 				clocks = <&xtal>, <&xtal>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 643f94d9d08e..13e742ba00be 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -339,7 +339,7 @@
 		};
 
 		spdifin: audio-controller@400 {
-			compatible = "amlogic,g12a-spdifin",
+			compatible = "amlogic,sm1-spdifin",
 				     "amlogic,axg-spdifin";
 			reg = <0x0 0x400 0x0 0x30>;
 			#sound-dai-cells = <0>;
@@ -353,7 +353,7 @@
 		};
 
 		spdifout_a: audio-controller@480 {
-			compatible = "amlogic,g12a-spdifout",
+			compatible = "amlogic,sm1-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
@@ -518,6 +518,10 @@
 		     "amlogic,meson-gpio-intc";
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
 &pcie {
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027bbf..aadfa0ae0525 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -227,9 +227,6 @@
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9dcd25ec2c04..896d1f33b5b6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -586,6 +586,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f049687d6b96..d8516ec0dae7 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -450,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index d2f5345d0560..717288bbdb8b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1186,26 +1186,34 @@
 			dma-coherent;
 		};
 
-		usb0: usb@3100000 {
-			status = "disabled";
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 80 0x4>; /* Level high type */
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
+		bus: bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <0 80 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		usb1: usb@3110000 {
-			status = "disabled";
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3110000 0x0 0x10000>;
-			interrupts = <0 81 0x4>; /* Level high type */
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			usb1: usb@3110000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3110000 0x0 0x10000>;
+				interrupts = <0 81 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 		};
 
 		ccn@4000000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index 9b1b522517f8..0878a15acc1b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -82,12 +82,9 @@
 		pinctrl-0 = <&pinctrl_wifi_pdn>;
 		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-always-on;
 		regulator-name = "wifi_pwrdn_fake_regulator";
 		regulator-settling-time-us = <100>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
 	};
 
 	reg_pcie_switch: regulator-pcie-switch {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index fc1a5d34382b..49298cd9eb0d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index adb98a72bdfd..89857e14c461 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -27,8 +27,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -43,8 +43,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -59,8 +59,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -75,8 +75,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -282,8 +282,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -297,8 +297,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -311,8 +311,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -332,8 +332,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -353,8 +353,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index ea8c93757521..c66449798efc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -32,11 +32,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
@@ -44,11 +45,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
@@ -56,11 +58,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
@@ -68,11 +71,12 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 8b16bd68576c..d9fa0deea700 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -294,8 +294,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -313,19 +313,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -337,40 +337,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index dcec57c20399..aab8e2421650 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -279,8 +279,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -292,19 +292,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -316,40 +316,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 6e75ab879bf5..60abcb636ced 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -210,7 +210,7 @@
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
 		trickle-diode-disable;
 	};
 };
@@ -252,8 +252,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index 1f8326613ee9..2076148e0862 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -237,8 +237,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 0ce60ad9c7d5..26d4afdbca6f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -47,17 +47,6 @@
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
 /* off-board header */
@@ -145,9 +134,10 @@
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -205,14 +195,6 @@
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
@@ -235,4 +217,11 @@
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 6f0811587142..14d20a33af8e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -929,7 +929,7 @@
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 9c015955ce58..6e545a6dfb38 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -399,6 +399,7 @@
 						      "pll8k", "pll11k", "clkext3";
 					dmas = <&sdma2 24 25 0x80000000>;
 					dma-names = "rx";
+					#sound-dai-cells = <0>;
 					status = "disabled";
 				};
 
@@ -1407,7 +1408,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1422,7 +1423,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index cde01617f6d5..79c3d597809e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -371,6 +371,7 @@
 						      "pll8k", "pll11k", "clkext3";
 					dmas = <&sdma2 24 25 0x80000000>;
 					dma-names = "rx";
+					#sound-dai-cells = <0>;
 					status = "disabled";
 				};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index acd265d8b58e..e094f409028d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -163,13 +163,12 @@
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai3>;
+			frame-master;
+			bitclock-master;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8962>;
-			clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
-			frame-master;
-			bitclock-master;
 		};
 	};
 };
@@ -381,10 +380,9 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
-			  <&clk IMX8MP_AUDIO_PLL2> ;
-	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-	assigned-clock-rates = <12288000>, <361267200>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
 	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 13674dc64be9..cd44bf83745c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -121,7 +121,7 @@
 	flash@0 {	/* W25Q128JVEI */
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-max-frequency = <40000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 	};
@@ -484,7 +484,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usb3_phy0 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 28db9349ed62..267ceffc02d8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -284,7 +284,6 @@
 	usb_hub_2_x: hub@1 {
 		compatible = "usbbda,5411";
 		reg = <1>;
-		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 		vdd-supply = <&reg_usb_hub>;
 		peer-hub = <&usb_hub_3_x>;
 	};
@@ -293,7 +292,6 @@
 	usb_hub_3_x: hub@2 {
 		compatible = "usbbda,411";
 		reg = <2>;
-		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 		vdd-supply = <&reg_usb_hub>;
 		peer-hub = <&usb_hub_2_x>;
 	};
@@ -443,7 +441,6 @@
 	pinctrl_usb1: usb1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
-			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25				0x19
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index cb1953d14aa9..eae39c1cb985 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -251,8 +251,8 @@
 				  <&clk IMX8MP_CLK_CLKOUT2>,
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
-		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
 		ports {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index cc9d468b43ab..92f8cc05fe9d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -23,7 +23,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -107,6 +107,13 @@
 		enable-active-high;
 	};
 
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8960-audio";
@@ -342,7 +349,7 @@
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -393,14 +400,16 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
 
 		ports {
 			#address-cells = <1>;
@@ -409,7 +418,7 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -417,7 +426,7 @@
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -502,7 +511,7 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4240e20d38ac..258e90cc16ff 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -168,6 +168,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -464,7 +471,7 @@
 		clock-names = "mclk";
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
 		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		iov-supply = <&reg_vcc_3v3>;
+		iov-supply = <&reg_vcc_1v8>;
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index 68c62def4c06..d27bfba1b4b8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -161,7 +161,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index d247b6d33303..7ebda8d7bcb6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -785,6 +785,23 @@
 						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
 					};
 
+					pgc_mlmix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>,
+								       <800000000>,
+								       <300000000>;
+					};
+
 					pgc_audio: power-domain@5 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
@@ -817,6 +834,12 @@
 						assigned-clock-rates = <800000000>, <400000000>;
 					};
 
+					pgc_vpumix: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
 					pgc_gpu3d: power-domain@9 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
@@ -832,60 +855,64 @@
 							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
 					};
 
-					pgc_mipi_phy2: power-domain@16 {
+					pgc_vpu_g1: power-domain@11 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
 					};
 
-					pgc_hsiomix: power-domain@17 {
+					pgc_vpu_g2: power-domain@12 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
-						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
-							 <&clk IMX8MP_CLK_HSIO_ROOT>;
-						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
-						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
-						assigned-clock-rates = <500000000>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+
 					};
 
-					pgc_ispdwp: power-domain@18 {
+					pgc_vpu_vc8000e: power-domain@13 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
-						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 					};
 
-					pgc_vpumix: power-domain@19 {
+					pgc_hdmimix: power-domain@14 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
-						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
+						clocks = <&clk IMX8MP_CLK_HDMI_ROOT>,
+							 <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+								  <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+									 <&clk IMX8MP_SYS_PLL1_133M>;
+						assigned-clock-rates = <500000000>, <133000000>;
 					};
 
-					pgc_vpu_g1: power-domain@20 {
+					pgc_hdmi_phy: power-domain@15 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
-						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMI_PHY>;
 					};
 
-					pgc_vpu_g2: power-domain@21 {
+					pgc_mipi_phy2: power-domain@16 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
-						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
 					};
 
-					pgc_vpu_vc8000e: power-domain@22 {
+					pgc_hsiomix: power-domain@17 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
-						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
 					};
 
-					pgc_mlmix: power-domain@24 {
+					pgc_ispdwp: power-domain@18 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
-						clocks = <&clk IMX8MP_CLK_ML_AXI>,
-							 <&clk IMX8MP_CLK_ML_AHB>,
-							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
+						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
 					};
 				};
 			};
@@ -1831,6 +1858,27 @@
 				#power-domain-cells = <1>;
 				#clock-cells = <0>;
 			};
+
+			hdmi_blk_ctrl: blk-ctrl@32fc0000 {
+				compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+				reg = <0x32fc0000 0x1000>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_HDMI_24M>,
+					 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+				clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
+				power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmi_phy>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>;
+				power-domain-names = "bus", "irqsteer", "lcdif",
+						     "pai", "pvi", "trng",
+						     "hdmi-tx", "hdmi-tx-phy",
+						     "hdcp", "hrv";
+				#power-domain-cells = <1>;
+			};
 		};
 
 		pcie: pcie@33800000 {
@@ -1970,6 +2018,18 @@
 			interconnect-names = "g1", "g2", "vc8000e";
 		};
 
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			power-domains = <&pgc_mlmix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
@@ -2030,6 +2090,7 @@
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 
 		};
@@ -2072,6 +2133,7 @@
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index a0bd3d5942e0..550973373e8e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1649,6 +1649,7 @@
 			phys = <&usb3_phy0>, <&usb3_phy0>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg1>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
@@ -1680,6 +1681,7 @@
 			phys = <&usb3_phy1>, <&usb3_phy1>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg2>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 0b34cc2250e1..a9ab87699f3d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -36,7 +36,7 @@
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index e9b198c13b2f..d896135f31fc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -49,15 +49,15 @@
 };
 
 &flexcan2 {
-	clocks = <&can1_lpcg 1>,
-		 <&can1_lpcg 0>;
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan3 {
-	clocks = <&can2_lpcg 1>,
-		 <&can2_lpcg 0>;
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
index 7764b4146e0a..2bbdacb1313f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -8,5 +8,5 @@
 };
 
 &jpegenc {
-	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc";
+	compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index cafd39130eb8..a06ca740f540 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -168,7 +168,6 @@
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index f06139bdff97..aaf9685ef0fb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -437,7 +437,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	no-sdio;
@@ -577,7 +577,7 @@
 		fsl,pins = <
 			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
 			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
-			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
 		>;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
index f6e422dc2663..b6f3c076fe54 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -19,7 +19,7 @@
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
-			alloc-ranges = <0 0x60000000 0 0x40000000>;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
 			size = <0 0x10000000>;
 			linux,cma-default;
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
index dcf6e4846ac9..35155b009dd2 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -373,7 +373,7 @@
 					compatible = "fsl,imx93-src-slice";
 					reg = <0x44462400 0x400>, <0x44465800 0x400>;
 					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
 						 <&clk IMX93_CLK_MEDIA_APB>;
 				};
 			};
@@ -786,6 +786,8 @@
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
 				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -807,7 +809,9 @@
 							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
 				assigned-clock-rates = <100000000>, <250000000>;
 				intf_mode = <&wakeupmix_gpr 0x28>;
-				snps,clk-csr = <0>;
+				snps,clk-csr = <6>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -888,6 +892,15 @@
 			reg = <0x47510000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			eth_mac1: mac-address@4ec {
+				reg = <0x4ec 0x6>;
+			};
+
+			eth_mac2: mac-address@4f2 {
+				reg = <0x4f2 0x6>;
+			};
+
 		};
 
 		s4muap: mailbox@47520000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index ed1b5a7a6067..d01023401d7e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -58,7 +58,7 @@
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>;  /* GICC */
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index 970047f2dabd..c06e011a6c3f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -25,9 +25,6 @@
 			gpios = <&gpio28 0 0>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ldo3: ldo3 { /* HDMI */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1500000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
index 48ec4ebec0a8..b864ffa74ea8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
index 3869460aa5dc..996fb39bb50c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 9eab2bb22134..805ef2d79b40 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -130,7 +130,7 @@
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 		interrupt-parent = <&gpiosb>;
-		interrupts = <5 0>; /* GPIO2_5 */
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e300145ad1a6..1cc3fa1c354d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -431,14 +431,14 @@
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 2c920e22cec2..7ec7c789d87e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -138,7 +138,6 @@
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 4ec1aae0a3a9..7e595ac80043 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -511,14 +511,14 @@
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 32cfb3e2efc3..47d45ff3d6f5 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -120,7 +120,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};
@@ -170,7 +170,7 @@
 
 &cp0_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>,		/* control */
 	      <0x2000000 0x1000000>;	/* CS0 */
 	status = "okay";
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index c7de1ea0d470..6eb6a175de38 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -307,7 +307,7 @@
 &cp0_spi1 {
 	status = "disabled";
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>;
 
 	flash@0 {
@@ -371,7 +371,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index fffdb7bbf889..2d0ef6f23b3a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -129,7 +129,7 @@
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -156,7 +156,7 @@
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -182,14 +182,14 @@
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index ed1a9d319415..f767f921bdee 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -249,10 +249,11 @@
 		#clock-cells = <1>;
 	};
 
-	infracfg: syscon@10001000 {
+	infracfg: clock-controller@10001000 {
 		compatible = "mediatek,mt2712-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	pericfg: syscon@10003000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 86cedb0bf1a9..15838c1ee8cc 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -73,8 +73,9 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -317,8 +318,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index dad8e683aac5..0a14ef1da60d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -55,8 +55,9 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -243,8 +244,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 3ee9266fa8e9..917fa39a74f8 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -252,7 +252,7 @@
 		clock-names = "hif_sel";
 	};
 
-	cir: cir@10009000 {
+	cir: ir-receiver@10009000 {
 		compatible = "mediatek,mt7622-cir";
 		reg = <0 0x10009000 0 0x1000>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
@@ -283,16 +283,14 @@
 		};
 	};
 
-	apmixedsys: apmixedsys@10209000 {
-		compatible = "mediatek,mt7622-apmixedsys",
-			     "syscon";
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys";
 		reg = <0 0x10209000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	topckgen: topckgen@10210000 {
-		compatible = "mediatek,mt7622-topckgen",
-			     "syscon";
+	topckgen: clock-controller@10210000 {
+		compatible = "mediatek,mt7622-topckgen";
 		reg = <0 0x10210000 0 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -515,7 +513,6 @@
 			 <&pericfg CLK_PERI_AUXADC_PD>;
 		clock-names = "therm", "auxadc";
 		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
-		reset-names = "therm";
 		mediatek,auxadc = <&auxadc>;
 		mediatek,apmixedsys = <&apmixedsys>;
 		nvmem-cells = <&thermal_calibration>;
@@ -734,9 +731,8 @@
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
 	};
 
-	ssusbsys: ssusbsys@1a000000 {
-		compatible = "mediatek,mt7622-ssusbsys",
-			     "syscon";
+	ssusbsys: clock-controller@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -793,9 +789,8 @@
 		};
 	};
 
-	pciesys: pciesys@1a100800 {
-		compatible = "mediatek,mt7622-pciesys",
-			     "syscon";
+	pciesys: clock-controller@1a100800 {
+		compatible = "mediatek,mt7622-pciesys";
 		reg = <0 0x1a100800 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -921,12 +916,13 @@
 		};
 	};
 
-	hifsys: syscon@1af00000 {
-		compatible = "mediatek,mt7622-hifsys", "syscon";
+	hifsys: clock-controller@1af00000 {
+		compatible = "mediatek,mt7622-hifsys";
 		reg = <0 0x1af00000 0 0x70>;
+		#clock-cells = <1>;
 	};
 
-	ethsys: syscon@1b000000 {
+	ethsys: clock-controller@1b000000 {
 		compatible = "mediatek,mt7622-ethsys",
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
@@ -966,9 +962,7 @@
 	};
 
 	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt7622-eth",
-			     "mediatek,mt2701-eth",
-			     "syscon";
+		compatible = "mediatek,mt7622-eth";
 		reg = <0 0x1b100000 0 0x20000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index af4a4309bda4..aba6686eb34a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -43,7 +43,7 @@
 		#cooling-cells = <2>;
 		/* cooling level (0, 1, 2) - pwm inverted */
 		cooling-levels = <255 96 0>;
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000>;
 		status = "okay";
 	};
 
@@ -126,6 +126,7 @@
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c_sfp1>;
 		los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 		mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
 		tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
@@ -137,6 +138,7 @@
 		i2c-bus = <&i2c_sfp2>;
 		los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
 		tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
 	};
@@ -144,22 +146,22 @@
 
 &cpu_thermal {
 	cooling-maps {
-		cpu-active-high {
+		map-cpu-active-high {
 			/* active: set fan to cooling level 2 */
 			cooling-device = <&fan 2 2>;
 			trip = <&cpu_trip_active_high>;
 		};
 
-		cpu-active-low {
+		map-cpu-active-med {
 			/* active: set fan to cooling level 1 */
 			cooling-device = <&fan 1 1>;
-			trip = <&cpu_trip_active_low>;
+			trip = <&cpu_trip_active_med>;
 		};
 
-		cpu-passive {
-			/* passive: set fan to cooling level 0 */
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
 			cooling-device = <&fan 0 0>;
-			trip = <&cpu_trip_passive>;
+			trip = <&cpu_trip_active_low>;
 		};
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 3ef371ca254e..2f884c24f1eb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -237,12 +237,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 24eda00e320d..559990dcd1d1 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -16,49 +16,49 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator-40m {
-		compatible = "fixed-clock";
-		clock-frequency = <40000000>;
-		#clock-cells = <0>;
-		clock-output-names = "clkxtal";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu0: cpu@0 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
-			device_type = "cpu";
-			enable-method = "psci";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 	};
 
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -121,38 +121,30 @@
 
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
 	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
 			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
 			      <0 0x0c080000 0 0x80000>,  /* GICR */
 			      <0 0x0c400000 0 0x2000>,   /* GICC */
 			      <0 0x0c410000 0 0x1000>,   /* GICH */
 			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
 		infracfg: infracfg@10001000 {
 			compatible = "mediatek,mt7986-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		wed_pcie: wed-pcie@10003000 {
@@ -202,6 +194,19 @@
 			#interrupt-cells = <2>;
 		};
 
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7986-sgmiisys_0",
 				     "syscon";
@@ -234,26 +239,11 @@
 				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ring0", "ring1", "ring2", "ring3";
 			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-			clock-names = "infra_eip97_ck";
 			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
 			status = "disabled";
 		};
 
-		pwm: pwm@10048000 {
-			compatible = "mediatek,mt7986-pwm";
-			reg = <0 0x10048000 0 0x1000>;
-			#clock-cells = <1>;
-			#pwm-cells = <2>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_PWM_SEL>,
-				 <&infracfg CLK_INFRA_PWM_STA>,
-				 <&infracfg CLK_INFRA_PWM1_CK>,
-				 <&infracfg CLK_INFRA_PWM2_CK>;
-			clock-names = "top", "main", "pwm1", "pwm2";
-			status = "disabled";
-		};
-
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -311,9 +301,9 @@
 
 		spi0: spi@1100a000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100a000 0 0x100>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +315,9 @@
 
 		spi1: spi@1100b000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100b000 0 0x100>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -337,6 +327,20 @@
 			status = "disabled";
 		};
 
+		thermal: thermal@1100c800 {
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
 		auxadc: adc@1100d000 {
 			compatible = "mediatek,mt7986-auxadc";
 			reg = <0 0x1100d000 0 0x1000>;
@@ -374,6 +378,10 @@
 			reg = <0 0x11230000 0 0x1000>,
 			      <0 0x11c20000 0 0x1000>;
 			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_250M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D5_D2>;
 			clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
 				 <&infracfg CLK_INFRA_MSDC_HCK_CK>,
 				 <&infracfg CLK_INFRA_MSDC_CK>,
@@ -384,39 +392,23 @@
 			status = "disabled";
 		};
 
-		thermal: thermal@1100c800 {
-			#thermal-sensor-cells = <1>;
-			compatible = "mediatek,mt7986-thermal";
-			reg = <0 0x1100c800 0 0x800>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&infracfg CLK_INFRA_THERM_CK>,
-				 <&infracfg CLK_INFRA_ADC_26M_CK>,
-				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
-			clock-names = "therm", "auxadc", "adc_32k";
-			mediatek,auxadc = <&auxadc>;
-			mediatek,apmixedsys = <&apmixedsys>;
-			nvmem-cells = <&thermal_calibration>;
-			nvmem-cell-names = "calibration-data";
-		};
-
 		pcie: pcie@11280000 {
 			compatible = "mediatek,mt7986-pcie",
 				     "mediatek,mt8192-pcie";
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg = <0x00 0x11280000 0x00 0x4000>;
-			reg-names = "pcie-mac";
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			bus-range = <0x00 0xff>;
-			ranges = <0x82000000 0x00 0x20000000 0x00
-				  0x20000000 0x00 0x10000000>;
 			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
 				 <&infracfg CLK_INFRA_IPCIE_CK>,
 				 <&infracfg CLK_INFRA_IPCIER_CK>,
 				 <&infracfg CLK_INFRA_IPCIEB_CK>;
 			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-			status = "disabled";
 
 			phys = <&pcie_port PHY_TYPE_PCIE>;
 			phy-names = "pcie-phy";
@@ -427,6 +419,8 @@
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
+			status = "disabled";
+
 			pcie_intc: interrupt-controller {
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
@@ -437,9 +431,9 @@
 		pcie_phy: t-phy {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
 			status = "disabled";
 
 			pcie_port: pcie-phy@11c00000 {
@@ -464,9 +458,9 @@
 		usb_phy: t-phy@11e10000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11e10000 0x1700>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0 0x11e10000 0x1700>;
 			status = "disabled";
 
 			u2port0: usb-phy@0 {
@@ -494,8 +488,6 @@
 		};
 
 		ethsys: syscon@15000000 {
-			 #address-cells = <1>;
-			 #size-cells = <1>;
 			 compatible = "mediatek,mt7986-ethsys",
 				      "syscon";
 			 reg = <0 0x15000000 0 0x1000>;
@@ -529,20 +521,6 @@
 			mediatek,wo-ccif = <&wo_ccif1>;
 		};
 
-		wo_ccif0: syscon@151a5000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151a5000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		wo_ccif1: syscon@151ad000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151ad000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
 			reg = <0 0x15100000 0 0x80000>;
@@ -575,26 +553,39 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
 			mediatek,wed-pcie = <&wed_pcie>;
 			mediatek,wed = <&wed0>, <&wed1>;
-			#reset-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		wifi: wifi@18000000 {
 			compatible = "mediatek,mt7986-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
 			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
 			reset-names = "consys";
 			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
 				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
 			clock-names = "mcu", "ap2conn";
-			reg = <0 0x18000000 0 0x1000000>,
-			      <0 0x10003000 0 0x1000>,
-			      <0 0x11d10000 0 0x1000>;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
@@ -610,24 +601,45 @@
 			thermal-sensors = <&thermal 0>;
 
 			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
 				cpu_trip_active_high: active-high {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_active_low: active-low {
+				cpu_trip_active_med: active-med {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_passive: passive {
-					temperature = <40000>;
+				cpu_trip_active_low: active-low {
+					temperature = <60000>;
 					hysteresis = <2000>;
-					type = "passive";
+					type = "active";
 				};
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index dde190442e38..57dcaeef31d7 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -152,12 +152,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 5122963d8743..d258c80213b2 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -44,7 +44,7 @@
 		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p1_vbus: regulator@0 {
+	usb_p1_vbus: regulator-usb-p1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	usb_p0_vbus: regulator@1 {
+	usb_p0_vbus: regulator-usb-p0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index d8bd51807683..77f9ab94c00b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -31,14 +31,14 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
 		};
 	};
 
-	ntc@0 {
+	thermal-sensor {
 		compatible = "murata,ncp03wf104";
 		pullup-uv = <1800000>;
 		pullup-ohm = <390000>;
@@ -155,8 +155,8 @@
 };
 
 &pio {
-	i2c_pins_0: i2c0{
-		pins_i2c{
+	i2c_pins_0: i2c0 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -164,8 +164,8 @@
 		};
 	};
 
-	i2c_pins_1: i2c1{
-		pins_i2c{
+	i2c_pins_1: i2c1 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -173,8 +173,8 @@
 		};
 	};
 
-	i2c_pins_2: i2c2{
-		pins_i2c{
+	i2c_pins_2: i2c2 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
@@ -182,8 +182,8 @@
 		};
 	};
 
-	i2c_pins_3: i2c3{
-		pins_i2c{
+	i2c_pins_3: i2c3 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -191,8 +191,8 @@
 		};
 	};
 
-	i2c_pins_4: i2c4{
-		pins_i2c{
+	i2c_pins_4: i2c4 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
@@ -200,8 +200,8 @@
 		};
 	};
 
-	i2c_pins_5: i2c5{
-		pins_i2c{
+	i2c_pins_5: i2c5 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
@@ -209,8 +209,8 @@
 		};
 	};
 
-	spi_pins_0: spi0{
-		pins_spi{
+	spi_pins_0: spi0 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_SPI0_CSB>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -324,8 +324,8 @@
 		};
 	};
 
-	spi_pins_1: spi1{
-		pins_spi{
+	spi_pins_1: spi1 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -334,8 +334,8 @@
 		};
 	};
 
-	spi_pins_2: spi2{
-		pins_spi{
+	spi_pins_2: spi2 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>,
@@ -344,8 +344,8 @@
 		};
 	};
 
-	spi_pins_3: spi3{
-		pins_spi{
+	spi_pins_3: spi3 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -354,8 +354,8 @@
 		};
 	};
 
-	spi_pins_4: spi4{
-		pins_spi{
+	spi_pins_4: spi4 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -364,8 +364,8 @@
 		};
 	};
 
-	spi_pins_5: spi5{
-		pins_spi{
+	spi_pins_5: spi5 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e7658dba..b9a6fd4f86d4 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -28,7 +28,7 @@
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index bf97b60ae4d1..32f6899f885e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -91,6 +91,8 @@
 
 &dsi0 {
 	status = "okay";
+	/delete-property/#size-cells;
+	/delete-property/#address-cells;
 	/delete-node/panel@0;
 	ports {
 		port {
@@ -154,21 +156,24 @@
 		vdd18-supply = <&pp1800_mipibrdg>;
 		vdd33-supply = <&vddio_mipibrdg>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-			anx7625_in: endpoint {
-				remote-endpoint = <&dsi_out>;
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			anx7625_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
 			};
 		};
 
@@ -441,20 +446,20 @@
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch_int_odl {
+		touch-int-odl {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_rst_l {
+		touch-rst-l {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad_int {
+		trackpad-int {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a06734bfaddb..ed5dbef7400e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -373,6 +373,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39e53a4..e73113cb51f5 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -340,6 +340,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index ffb2a44e0f41..d6fa93f1a240 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -344,6 +344,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 60e979a73361..d841eb01c48c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -108,7 +108,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
@@ -405,7 +405,6 @@
 };
 
 &mt6358_vgpu_reg {
-	regulator-min-microvolt = <625000>;
 	regulator-max-microvolt = <900000>;
 
 	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
@@ -432,7 +431,7 @@
 
 &pio {
 	aud_pins_default: audiopins {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
 				<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
@@ -454,7 +453,7 @@
 	};
 
 	aud_pins_tdm_out_on: audiotdmouton {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
 				<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
@@ -466,7 +465,7 @@
 	};
 
 	aud_pins_tdm_out_off: audiotdmoutoff {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
 				<PINMUX_GPIO171__FUNC_GPIO171>,
@@ -480,13 +479,13 @@
 	};
 
 	bt_pins: bt-pins {
-		pins_bt_en {
+		pins-bt-en {
 			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
 			output-low;
 		};
 	};
 
-	ec_ap_int_odl: ec_ap_int_odl {
+	ec_ap_int_odl: ec-ap-int-odl {
 		pins1 {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
@@ -494,7 +493,7 @@
 		};
 	};
 
-	h1_int_od_l: h1_int_od_l {
+	h1_int_od_l: h1-int-od-l {
 		pins1 {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
@@ -502,7 +501,7 @@
 	};
 
 	i2c0_pins: i2c0 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -511,7 +510,7 @@
 	};
 
 	i2c1_pins: i2c1 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -520,7 +519,7 @@
 	};
 
 	i2c2_pins: i2c2 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			bias-disable;
@@ -529,7 +528,7 @@
 	};
 
 	i2c3_pins: i2c3 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -538,7 +537,7 @@
 	};
 
 	i2c4_pins: i2c4 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			bias-disable;
@@ -547,7 +546,7 @@
 	};
 
 	i2c5_pins: i2c5 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
@@ -556,7 +555,7 @@
 	};
 
 	i2c6_pins: i2c6 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
 			bias-disable;
@@ -564,7 +563,7 @@
 	};
 
 	mmc0_pins_default: mmc0-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -579,13 +578,13 @@
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <01>;
@@ -593,7 +592,7 @@
 	};
 
 	mmc0_pins_uhs: mmc0-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -608,19 +607,19 @@
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_ds {
+		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-up-adv = <01>;
@@ -628,7 +627,7 @@
 	};
 
 	mmc1_pins_default: mmc1-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -638,7 +637,7 @@
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
 			mediatek,pull-down-adv = <10>;
@@ -646,7 +645,7 @@
 	};
 
 	mmc1_pins_uhs: mmc1-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
@@ -657,7 +656,7 @@
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			mediatek,pull-down-adv = <10>;
@@ -665,15 +664,15 @@
 		};
 	};
 
-	panel_pins_default: panel_pins_default {
-		panel_reset {
+	panel_pins_default: panel-pins-default {
+		panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0_pin_default {
+	pwm0_pin_default: pwm0-pin-default {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
@@ -685,14 +684,14 @@
 	};
 
 	scp_pins: scp {
-		pins_scp_uart {
+		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
 	spi0_pins: spi0 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -702,7 +701,7 @@
 	};
 
 	spi1_pins: spi1 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -712,20 +711,20 @@
 	};
 
 	spi2_pins: spi2 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins_spi_mi {
+		pins-spi-mi {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
 	spi3_pins: spi3 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -735,7 +734,7 @@
 	};
 
 	spi4_pins: spi4 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -745,7 +744,7 @@
 	};
 
 	spi5_pins: spi5 {
-		pins_spi{
+		pins-spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -755,63 +754,61 @@
 	};
 
 	uart0_pins_default: uart0-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
 		};
 	};
 
 	uart1_pins_default: uart1-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	uart1_pins_sleep: uart1-pins-sleep {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	wifi_pins_pwrseq: wifi-pins-pwrseq {
-		pins_wifi_enable {
+		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
 	wifi_pins_wakeup: wifi-pins-wakeup {
-		pins_wifi_wakeup {
+		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
 		};
@@ -907,10 +904,6 @@
 			google,usb-port-id = <0>;
 		};
 
-		cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		typec {
 			compatible = "google,cros-ec-typec";
 			#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index 526bcae7a3f8..b5784a60c315 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -193,7 +193,7 @@
 
 &pio {
 	i2c_pins_0: i2c0 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
@@ -202,7 +202,7 @@
 	};
 
 	i2c_pins_1: i2c1 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
@@ -211,7 +211,7 @@
 	};
 
 	i2c_pins_2: i2c2 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
@@ -220,7 +220,7 @@
 	};
 
 	i2c_pins_3: i2c3 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
@@ -229,7 +229,7 @@
 	};
 
 	i2c_pins_4: i2c4 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
@@ -238,7 +238,7 @@
 	};
 
 	i2c_pins_5: i2c5 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5169779d01df..8721a5ffca30 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1210,127 +1210,6 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
-		thermal_zones: thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <100>;
-				polling-delay = <500>;
-				thermal-sensors = <&thermal 0>;
-				sustainable-power = <5000>;
-
-				trips {
-					threshold: trip-point0 {
-						temperature = <68000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					target: trip-point1 {
-						temperature = <80000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					cpu_crit: cpu-crit {
-						temperature = <115000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&target>;
-						cooling-device = <&cpu0
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu1
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu2
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu3
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <3072>;
-					};
-					map1 {
-						trip = <&target>;
-						cooling-device = <&cpu4
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu5
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu6
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu7
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <1024>;
-					};
-				};
-			};
-
-			/* The tzts1 ~ tzts6 don't need to polling */
-			/* The tzts1 ~ tzts6 don't need to thermal throttle */
-
-			tzts1: tzts1 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 1>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts2: tzts2 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 2>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts3: tzts3 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 3>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts4: tzts4 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 4>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts5: tzts5 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 5>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tztsABB: tztsABB {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 6>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-		};
-
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1749,6 +1628,7 @@
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
 			#clock-cells = <1>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>;
 		};
 
 		gpu: gpu@13040000 {
@@ -1781,7 +1661,7 @@
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
-		mdp3-rdma0@14001000 {
+		dma-controller0@14001000 {
 			compatible = "mediatek,mt8183-mdp3-rdma";
 			reg = <0 0x14001000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
@@ -1793,6 +1673,7 @@
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
 			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
 				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-rsz0@14003000 {
@@ -1813,7 +1694,7 @@
 			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
 		};
 
-		mdp3-wrot0@14005000 {
+		dma-controller@14005000 {
 			compatible = "mediatek,mt8183-mdp3-wrot";
 			reg = <0 0x14005000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
@@ -1822,6 +1703,7 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-wdma@14006000 {
@@ -2105,4 +1987,125 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <500>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <5000>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+
+		/* The tzts1 ~ tzts6 don't need to polling */
+		/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+		tzts1: tzts1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts2: tzts2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts3: tzts3 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts4: tzts4 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts5: tzts5 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 5>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tztsABB: tztsABB {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 6>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index f04ae70c470a..84ec6c1aa12b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -22,7 +22,7 @@
 
 	aliases {
 		ovl0 = &ovl0;
-		ovl_2l0 = &ovl_2l0;
+		ovl-2l0 = &ovl_2l0;
 		rdma0 = &rdma0;
 		rdma1 = &rdma1;
 	};
@@ -924,17 +924,24 @@
 					reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>;
 					clocks = <&topckgen CLK_TOP_SENINF>,
 						 <&topckgen CLK_TOP_SENINF1>;
-					clock-names = "csirx_top0", "csirx_top1";
+					clock-names = "subsys-csirx-top0",
+						      "subsys-csirx-top1";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB {
 					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					clocks = <&topckgen CLK_TOP_USB_TOP>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
 					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
@@ -942,7 +949,8 @@
 					reg = <MT8186_POWER_DOMAIN_ADSP_AO>;
 					clocks = <&topckgen CLK_TOP_AUDIODSP>,
 						 <&topckgen CLK_TOP_ADSP_BUS>;
-					clock-names = "audioadsp", "adsp_bus";
+					clock-names = "audioadsp",
+						      "subsys-adsp-bus";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
@@ -975,8 +983,11 @@
 						 <&mmsys CLK_MM_SMI_COMMON>,
 						 <&mmsys CLK_MM_SMI_GALS>,
 						 <&mmsys CLK_MM_SMI_IOMMU>;
-					clock-names = "disp", "mdp", "smi_infra", "smi_common",
-						     "smi_gals", "smi_iommu";
+					clock-names = "disp", "mdp",
+						      "subsys-smi-infra",
+						      "subsys-smi-common",
+						      "subsys-smi-gals",
+						      "subsys-smi-iommu";
 					mediatek,infracfg = <&infracfg_ao>;
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -993,15 +1004,17 @@
 
 					power-domain@MT8186_POWER_DOMAIN_CAM {
 						reg = <MT8186_POWER_DOMAIN_CAM>;
-						clocks = <&topckgen CLK_TOP_CAM>,
-							 <&topckgen CLK_TOP_SENINF>,
+						clocks = <&topckgen CLK_TOP_SENINF>,
 							 <&topckgen CLK_TOP_SENINF1>,
 							 <&topckgen CLK_TOP_SENINF2>,
 							 <&topckgen CLK_TOP_SENINF3>,
+							 <&camsys CLK_CAM2MM_GALS>,
 							 <&topckgen CLK_TOP_CAMTM>,
-							 <&camsys CLK_CAM2MM_GALS>;
-						clock-names = "cam-top", "cam0", "cam1", "cam2",
-							     "cam3", "cam-tm", "gals";
+							 <&topckgen CLK_TOP_CAM>;
+						clock-names = "cam0", "cam1", "cam2",
+							      "cam3", "gals",
+							      "subsys-cam-tm",
+							      "subsys-cam-top";
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -1020,9 +1033,9 @@
 
 					power-domain@MT8186_POWER_DOMAIN_IMG {
 						reg = <MT8186_POWER_DOMAIN_IMG>;
-						clocks = <&topckgen CLK_TOP_IMG1>,
-							 <&imgsys1 CLK_IMG1_GALS_IMG1>;
-						clock-names = "img-top", "gals";
+						clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+							 <&topckgen CLK_TOP_IMG1>;
+						clock-names = "gals", "subsys-img-top";
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -1041,8 +1054,11 @@
 							 <&ipesys CLK_IPE_LARB20>,
 							 <&ipesys CLK_IPE_SMI_SUBCOM>,
 							 <&ipesys CLK_IPE_GALS_IPE>;
-						clock-names = "ipe-top", "ipe-larb0", "ipe-larb1",
-							      "ipe-smi", "ipe-gals";
+						clock-names = "subsys-ipe-top",
+							      "subsys-ipe-larb0",
+							      "subsys-ipe-larb1",
+							      "subsys-ipe-smi",
+							      "subsys-ipe-gals";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1051,7 +1067,7 @@
 						reg = <MT8186_POWER_DOMAIN_VENC>;
 						clocks = <&topckgen CLK_TOP_VENC>,
 							 <&vencsys CLK_VENC_CKE1_VENC>;
-						clock-names = "venc0", "larb";
+						clock-names = "venc0", "subsys-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1061,7 +1077,9 @@
 						clocks = <&topckgen CLK_TOP_WPE>,
 							 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
 							 <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>;
-						clock-names = "wpe0", "larb-ck", "larb-pclk";
+						clock-names = "wpe0",
+							      "subsys-larb-ck",
+							      "subsys-larb-pclk";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1148,14 +1166,14 @@
 			status = "disabled";
 		};
 
-		adsp_mailbox0: mailbox@10686000 {
+		adsp_mailbox0: mailbox@10686100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10686100 0 0x1000>;
 			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
-		adsp_mailbox1: mailbox@10687000 {
+		adsp_mailbox1: mailbox@10687100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10687100 0 0x1000>;
@@ -1518,8 +1536,9 @@
 			clocks = <&topckgen CLK_TOP_USB_TOP>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
-				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port0 PHY_TYPE_USB2>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
@@ -1583,8 +1602,9 @@
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
-				 <&clk26m>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
@@ -1656,7 +1676,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speedbin: gpu-speed-bin@59c {
+			gpu_speedbin: gpu-speedbin@59c {
 				reg = <0x59c 0x4>;
 				bits = <0 3>;
 			};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index d4a8a8d0c2f8..bde8b7e223f4 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -147,6 +147,7 @@
 		regulator-boot-on;
 		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&pp3300_g>;
+		off-on-delay-us = <500000>;
 	};
 
 	/* separately switched 3.3V power rail */
@@ -1308,10 +1309,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		base_detection: cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
@@ -1396,7 +1393,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1406,7 +1403,7 @@
 			mt6315_6_vbuck3: vbuck3 {
 				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1423,7 +1420,7 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <606250>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5dbb..b1443adc55aa 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -1412,6 +1412,7 @@
 			reg = <0 0x14001000 0 0x1000>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
 					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
@@ -1770,7 +1771,7 @@
 			mediatek,scp = <&scp>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
 			clocks = <&vencsys CLK_VENC_SET1_VENC>;
-			clock-names = "venc-set1";
+			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index 2d5e8f371b6d..a82d716f10d4 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -23,3 +23,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2586c32ce6e6..2fe20e0dad83 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -43,3 +43,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index f54f9477b99d..dd294ca98194 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -44,3 +44,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 21e33b9aa075..1b0b67a8fb26 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -114,6 +114,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -176,6 +247,42 @@
 	memory-region = <&afe_mem>;
 };
 
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
 &dp_intf0 {
 	status = "okay";
 
@@ -362,7 +469,7 @@
 	pinctrl-0 = <&i2c7_pins>;
 
 	pmic@34 {
-		#interrupt-cells = <1>;
+		#interrupt-cells = <2>;
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
@@ -1098,7 +1205,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1116,7 +1223,7 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <625000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1127,6 +1234,36 @@
 	};
 };
 
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
 &u3phy0 {
 	status = "okay";
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 5d635085fe3f..9079e48aea23 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -128,6 +128,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 54c674c45b49..20e6d90cc411 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -627,6 +627,8 @@
 
 					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
 						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+						clock-names = "venc1-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -689,6 +691,8 @@
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
 							reg = <MT8195_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC_LARB>;
+							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
 							#power-domain-cells = <0>;
 						};
@@ -1959,6 +1963,7 @@
 			compatible = "mediatek,mt8195-vppsys0", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>;
 		};
 
 		mutex@1400f000 {
@@ -2073,6 +2078,7 @@
 			compatible = "mediatek,mt8195-vppsys1", "syscon";
 			reg = <0 0x14f00000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>;
 		};
 
 		mutex@14f01000 {
@@ -2619,6 +2625,7 @@
 			reg = <0 0x1c01a000 0 0x1000>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
 		};
 
 
@@ -2665,7 +2672,7 @@
 			reg = <0 0x1b010000 0 0x1000>;
 			mediatek,larb-id = <20>;
 			mediatek,smi = <&smi_common_vpp>;
-			clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>,
+			clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>,
 				 <&vencsys_core1 CLK_VENC_CORE1_GALS>,
 				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
 			clock-names = "apb", "smi", "gals";
@@ -2772,6 +2779,7 @@
 			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
 		};
 
@@ -2842,6 +2850,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
 			clock-names = "vdo1_mutex";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
 
@@ -2869,7 +2878,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
 
-		vdo1_rdma0: rdma@1c104000 {
+		vdo1_rdma0: dma-controller@1c104000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c104000 0 0x1000>;
 			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2877,9 +2886,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma1: rdma@1c105000 {
+		vdo1_rdma1: dma-controller@1c105000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c105000 0 0x1000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2887,9 +2897,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma2: rdma@1c106000 {
+		vdo1_rdma2: dma-controller@1c106000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c106000 0 0x1000>;
 			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2897,9 +2908,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma3: rdma@1c107000 {
+		vdo1_rdma3: dma-controller@1c107000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c107000 0 0x1000>;
 			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2907,9 +2919,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma4: rdma@1c108000 {
+		vdo1_rdma4: dma-controller@1c108000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c108000 0 0x1000>;
 			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2917,9 +2930,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma5: rdma@1c109000 {
+		vdo1_rdma5: dma-controller@1c109000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c109000 0 0x1000>;
 			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2927,9 +2941,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma6: rdma@1c10a000 {
+		vdo1_rdma6: dma-controller@1c10a000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10a000 0 0x1000>;
 			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2937,9 +2952,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma7: rdma@1c10b000 {
+		vdo1_rdma7: dma-controller@1c10b000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10b000 0 0x1000>;
 			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2947,6 +2963,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
 		};
 
 		merge1: vpp-merge@1c10c000 {
@@ -3378,7 +3395,7 @@
 			};
 		};
 
-		gpu0-thermal {
+		gpu-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <250>;
 			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index bbc2e9bef08d..441216eda487 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -9,8 +9,8 @@
 	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = &as3722;
+		rtc1 = &tegra_rtc;
 		serial0 = &uarta;
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 8b78be8f4f9d..4b5435f58323 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -570,7 +570,7 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	tegra_rtc: rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 4413a9b6da87..bf2ccc8ff93c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -174,7 +174,7 @@
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
index 5f592f1d81e2..fe08e131b7b9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -28,7 +28,7 @@
 			flash@0 {
 				compatible = "jedec,spi-nor";
 				reg = <0>;
-				spi-max-frequency = <136000000>;
+				spi-max-frequency = <102000000>;
 				spi-tx-bus-width = <4>;
 				spi-rx-bus-width = <4>;
 			};
@@ -42,7 +42,7 @@
 		mmc@3400000 {
 			status = "okay";
 			bus-width = <4>;
-			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
 			disable-wp;
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 95524e5bce82..ac69eacf8a6b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -43,12 +43,12 @@
 				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 1b66b29be6a7..eeacdca02c0a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -172,6 +172,9 @@
 		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
 
 		avdd-supply = <&pm8916_l6>;
+		a2vdd-supply = <&pm8916_l6>;
+		dvdd-supply = <&pm8916_l6>;
+		pvdd-supply = <&pm8916_l6>;
 		v1p2-supply = <&pm8916_l6>;
 		v3p3-supply = <&pm8916_l17>;
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 8bfc2db44624..e40c55adff23 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -135,7 +135,7 @@
 			reg = <0x0 0x4a800000 0x0 0x100000>;
 			no-map;
 
-			hwlocks = <&tcsr_mutex 0>;
+			hwlocks = <&tcsr_mutex 3>;
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 47b8b1d6730a..fea16f3271c0 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -211,7 +211,7 @@
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_region>;
-		hwlocks = <&tcsr_mutex 0>;
+		hwlocks = <&tcsr_mutex 3>;
 	};
 
 	soc: soc@0 {
@@ -393,7 +393,7 @@
 
 		tcsr_mutex: hwlock@1905000 {
 			compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex";
-			reg = <0x0 0x01905000 0x0 0x1000>;
+			reg = <0x0 0x01905000 0x0 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
@@ -565,7 +565,7 @@
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <133330000>,
-					       <20000000>;
+					       <24000000>;
 
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
@@ -579,6 +579,7 @@
 				clocks = <&xo>;
 				clock-names = "ref";
 				tx-fifo-resize;
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -767,10 +768,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 00ed71936b47..e5993a365870 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -101,7 +101,7 @@
 			reg = <0x0 0x4ab00000 0x0 0x100000>;
 			no-map;
 
-			hwlocks = <&tcsr_mutex 0>;
+			hwlocks = <&tcsr_mutex 3>;
 		};
 
 		memory@4ac00000 {
@@ -641,6 +641,7 @@
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_0>, <&usb0_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -683,6 +684,7 @@
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_1>, <&usb1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -817,13 +819,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -879,13 +881,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 51aba071c1eb..8a72ad4afd03 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -195,7 +195,7 @@
 		smem@4aa00000 {
 			compatible = "qcom,smem";
 			reg = <0x0 0x4aa00000 0x0 0x100000>;
-			hwlocks = <&tcsr_mutex 0>;
+			hwlocks = <&tcsr_mutex 3>;
 			no-map;
 		};
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index e6b6738421c1..10abd091c51b 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -88,6 +88,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 8e238976ab1c..43078b890d86 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -118,6 +118,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 33fb65d73104..961ceb83a91f 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1813,7 +1813,7 @@
 			#size-cells = <1>;
 			#iommu-cells = <1>;
 			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-			ranges = <0 0x01e20000 0x40000>;
+			ranges = <0 0x01e20000 0x20000>;
 			reg = <0x01ef0000 0x3000>;
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_CLK>;
@@ -2085,6 +2085,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 6e24f0f2374f..3fd64cafe99c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1447,7 +1447,7 @@
 		apps_iommu: iommu@1ef0000 {
 			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
 			reg = <0x01ef0000 0x3000>;
-			ranges = <0 0x01e20000 0x40000>;
+			ranges = <0 0x01e20000 0x20000>;
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_CLK>;
 			clock-names = "iface", "bus";
@@ -1661,6 +1661,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
index ed95d09cedb1..6b9245cd8b0c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -111,6 +111,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
index 61ff629c9bf3..9ac4f507e321 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
@@ -104,6 +104,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
index 1a1d3f92a511..b0588f30f8f1 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
@@ -113,6 +113,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
index f9f5afbcc52b..4c5be22b47fe 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -379,7 +379,7 @@
 	smp2p-modem {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 13>;
+		qcom,ipc = <&apcs 8 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -402,7 +402,7 @@
 	smp2p-wcnss {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 17>;
+		qcom,ipc = <&apcs 8 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -428,9 +428,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 12>;
+		qcom,ipc-1 = <&apcs 8 13>;
 		qcom,ipc-2 = <&apcs 8 9>;
-		qcom,ipc-3 = <&apcs 8 18>;
+		qcom,ipc-3 = <&apcs 8 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index fcca1ba94da6..5fe5de9ceef9 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -109,11 +109,6 @@
 			qcom,client-id = <1>;
 		};
 
-		audio_mem: audio@cb400000 {
-			reg = <0 0xcb000000 0 0x400000>;
-			no-mem;
-		};
-
 		qseecom_mem: qseecom@cb400000 {
 			reg = <0 0xcb400000 0 0x1c00000>;
 			no-mem;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 06f8ff624181..d5b35ff0175c 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -405,7 +405,6 @@
 
 &hsusb_phy1 {
 	status = "okay";
-	extcon = <&typec>;
 
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c8e0986425ab..1f7cbb35886d 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -443,6 +443,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -2077,7 +2090,7 @@
 				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
 			freq-table-hz =
 				<100000000 200000000>,
-				<0 0>,
+				<100000000 200000000>,
 				<0 0>,
 				<0 0>,
 				<0 0>,
@@ -2643,6 +2656,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -3061,6 +3082,7 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,is-utmi-l1-suspend;
+				snps,parkmode-disable-ss-quirk;
 				tx-fifo-resize;
 			};
 		};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f180047cacb0..7fcc15b6946a 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1588,7 +1588,6 @@
 			 * SoC VDDMX RPM Power Domain in the Adreno driver.
 			 */
 			power-domains = <&gpucc GPU_GX_GDSC>;
-			status = "disabled";
 		};
 
 		gpucc: clock-controller@5065000 {
@@ -2034,9 +2033,11 @@
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2051,9 +2052,11 @@
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2068,9 +2071,11 @@
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2085,9 +2090,11 @@
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2152,7 +2159,8 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2161,33 +2169,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e72b5..40a8506553ef 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -418,6 +418,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,qcm2290-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,qcm2290-tlmm";
 			reg = <0x0 0x00500000 0x0 0x300000>;
@@ -665,6 +670,8 @@
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 10655401528e..a22b4501ce1e 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -62,7 +62,7 @@
 		vddrf-supply = <&vreg_l1_1p3>;
 		vddch0-supply = <&vdd_ch0_3p3>;
 
-		local-bd-address = [ 02 00 00 00 5a ad ];
+		local-bd-address = [ 00 00 00 00 00 00 ];
 
 		max-speed = <3200000>;
 	};
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 1c0e5d271e91..dbdc06be6260 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1452,7 +1452,21 @@
 				    "llcc_broadcast_base",
 				    "multi_channel_register";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
+
+			nvmem-cells = <&multi_chan_ddr>;
+			nvmem-cell-names = "multi-chan-ddr";
+		};
+
+		sec_qfprom: efuse@221c8000 {
+			compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			multi_chan_ddr: multi-chan-ddr@12b {
+				reg = <0x12b 0x1>;
+				bits = <0 2>;
+			};
 		};
 	};
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index eadba066972e..37abb83ea464 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -13,7 +13,7 @@
 	compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290";
 
 	aliases {
-		serial0 = &uart0;
+		serial0 = &uart4;
 		sdhc1 = &sdhc_1;
 		sdhc2 = &sdhc_2;
 	};
@@ -150,15 +150,15 @@
 
 		pm2250_s3: s3 {
 			/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
-			regulator-min-microvolts = <1350000>;
-			regulator-max-microvolts = <1350000>;
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
 			regulator-boot-on;
 		};
 
 		pm2250_s4: s4 {
 			/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
-			regulator-min-microvolts = <2072000>;
-			regulator-max-microvolts = <2072000>;
+			regulator-min-microvolt = <2072000>;
+			regulator-max-microvolt = <2072000>;
 			regulator-boot-on;
 		};
 
@@ -166,47 +166,47 @@
 
 		pm2250_l2: l2 {
 			/* LPDDR4X VDD2 */
-			regulator-min-microvolts = <1136000>;
-			regulator-max-microvolts = <1136000>;
+			regulator-min-microvolt = <1136000>;
+			regulator-max-microvolt = <1136000>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
 
 		pm2250_l3: l3 {
 			/* LPDDR4X VDDQ */
-			regulator-min-microvolts = <616000>;
-			regulator-max-microvolts = <616000>;
+			regulator-min-microvolt = <616000>;
+			regulator-max-microvolt = <616000>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
 
 		pm2250_l4: l4 {
-			/* max = 3.05V -> max = just below 3V (SDHCI2) */
-			regulator-min-microvolts = <1648000>;
-			regulator-max-microvolts = <2992000>;
+			/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
 			regulator-allow-set-load;
 		};
 
 		pm2250_l5: l5 {
 			/* CSI/DSI */
-			regulator-min-microvolts = <1232000>;
-			regulator-max-microvolts = <1232000>;
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1232000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l6: l6 {
 			/* DRAM PLL */
-			regulator-min-microvolts = <928000>;
-			regulator-max-microvolts = <928000>;
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
 
 		pm2250_l7: l7 {
 			/* Wi-Fi CX/MX */
-			regulator-min-microvolts = <664000>;
-			regulator-max-microvolts = <664000>;
+			regulator-min-microvolt = <664000>;
+			regulator-max-microvolt = <664000>;
 		};
 
 		/*
@@ -216,37 +216,37 @@
 
 		pm2250_l10: l10 {
 			/* Wi-Fi RFA */
-			regulator-min-microvolts = <1300000>;
-			regulator-max-microvolts = <1300000>;
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
 		};
 
 		pm2250_l11: l11 {
 			/* GPS RF1 */
-			regulator-min-microvolts = <1000000>;
-			regulator-max-microvolts = <1000000>;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 		};
 
 		pm2250_l12: l12 {
 			/* USB PHYs */
-			regulator-min-microvolts = <928000>;
-			regulator-max-microvolts = <928000>;
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l13: l13 {
 			/* USB/QFPROM/PLLs */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l14: l14 {
 			/* SDHCI1 VQMMC */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
 			/* Broken hardware, never turn it off! */
 			regulator-always-on;
@@ -254,8 +254,8 @@
 
 		pm2250_l15: l15 {
 			/* WCD/DSI/BT VDDIO */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
 			regulator-always-on;
 			regulator-boot-on;
@@ -263,47 +263,47 @@
 
 		pm2250_l16: l16 {
 			/* GPS RF2 */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 		};
 
 		pm2250_l17: l17 {
-			regulator-min-microvolts = <3000000>;
-			regulator-max-microvolts = <3000000>;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
 		};
 
 		pm2250_l18: l18 {
 			/* VDD_PXn */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 		};
 
 		pm2250_l19: l19 {
 			/* VDD_PXn */
-			regulator-min-microvolts = <1800000>;
-			regulator-max-microvolts = <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 		};
 
 		pm2250_l20: l20 {
 			/* SDHCI1 VMMC */
-			regulator-min-microvolts = <2856000>;
-			regulator-max-microvolts = <2856000>;
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
 			regulator-allow-set-load;
 		};
 
 		pm2250_l21: l21 {
 			/* SDHCI2 VMMC */
-			regulator-min-microvolts = <2960000>;
-			regulator-max-microvolts = <3300000>;
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
 		pm2250_l22: l22 {
 			/* Wi-Fi */
-			regulator-min-microvolts = <3312000>;
-			regulator-max-microvolts = <3312000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
 		};
 	};
 };
@@ -357,7 +357,7 @@
 };
 
 /* UART connected to the Micro-USB port via a FTDI chip */
-&uart0 {
+&uart4 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
@@ -366,6 +366,16 @@
 	status = "okay";
 };
 
+&usb_qmpphy {
+	vdda-phy-supply = <&pm2250_l12>;
+	vdda-pll-supply = <&pm2250_l13>;
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_hsphy {
 	vdd-supply = <&pm2250_l12>;
 	vdda-pll-supply = <&pm2250_l13>;
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 9d1149b646cd..081a45ffcd77 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -57,6 +57,17 @@
 		};
 	};
 
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -187,7 +198,7 @@
 	};
 };
 
-&i2c2 {
+&i2c2_gpio {
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -353,6 +364,8 @@
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -518,7 +531,6 @@
 
 &usb_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
 };
 
 &usb_hsphy {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 10baab77be00..e67fcafb99e6 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -63,8 +63,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-wlan {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 3e84431922cf..6099899ab2eb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -367,6 +367,16 @@
 	};
 };
 
+&pmm8155au_1_gpios {
+	pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
+		pins = "gpio4";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -384,10 +394,10 @@
 &sdhc_2 {
 	status = "okay";
 
-	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
 	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
@@ -505,13 +515,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	sdc2_off: sdc2-off-state {
@@ -532,13 +535,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi
index 96b2c59ad02b..23888029cc11 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -168,6 +168,9 @@
 };
 
 &gpucc {
+	/* SA8295P and SA8540P doesn't provide gfx.lvl */
+	/delete-property/ power-domains;
+
 	status = "disabled";
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 9f4f58e831a4..44bea063aedb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1602,8 +1602,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1689,8 +1689,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1752,8 +1752,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -2173,7 +2173,7 @@
 			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		memtimer: timer@17c20000 {
@@ -2350,6 +2350,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x140 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2383,6 +2384,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x120 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2398,7 +2400,7 @@
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pcie0: pci@1c00000{
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index b9d27ebab2db..336452298fa2 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -209,9 +209,22 @@
 		AVDD-supply = <&vreg_l15a_1p8>;
 		MICVDD-supply = <&reg_codec_3p3>;
 		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
 
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
 		realtek,jd-src = <1>;
 	};
 };
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 79c2f4a474bd..b2f653e3cdfe 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -970,6 +970,8 @@ ap_spi_fp: &spi10 {
 		vddrf-supply = <&pp1300_l2c>;
 		vddch0-supply = <&pp3300_l10c>;
 		max-speed = <3200000>;
+
+		qcom,local-bd-address-broken;
 	};
 };
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a79c0f2e1879..68b1c017a9fd 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2795,49 +2796,28 @@
 			nvmem-cells = <&qusb2p_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x3c>,
-			      <0 0x088ea000 0 0x18c>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x18>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		pmu@90b6300 {
@@ -2978,8 +2958,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3001,7 +2981,8 @@
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3307,8 +3288,9 @@
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -3365,8 +3347,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi0_phy 0>,
 				 <&mdss_dsi0_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",
@@ -3587,7 +3569,7 @@
 			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index d87ac485ef46..e058188f7a33 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -46,6 +46,26 @@
 	};
 };
 
+&lpass_aon {
+	status = "okay";
+};
+
+&lpass_core {
+	status = "okay";
+};
+
+&lpass_hm {
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&pdc_reset {
+	status = "okay";
+};
+
 /* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */
 &pmk8350_pon {
 	status = "disabled";
@@ -84,6 +104,10 @@
 	dma-coherent;
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 
diff --git linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 925428a5f6ae..149c7962f2cb 100644
--- linux-libre-6.6-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.6.50-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -649,18 +650,6 @@
 		};
 	};
 
-	eud_typec: connector {
-		compatible = "usb-c-connector";
-
-		ports {
-			port@0 {
-				con_eud: endpoint {
-					remote-endpoint = <&eud_con>;
-				};
-			};
-		};
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -869,7 +858,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_lane>,
-				 <0>, <0>, <0>, <0>;
+				 <0>, <0>, <0>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
@@ -936,6 +926,7 @@
 
 			bus-width = <8>;
 			supports-cqe;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -2108,8 +2099,16 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
@@ -2266,6 +2265,7 @@
 			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
 			clock-names = "iface";
 			#clock-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_rx_macro: codec@3200000 {
@@ -2417,6 +2417,7 @@
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_core: clock-controller@3900000 {
@@ -2427,6 +2428,7 @@
 			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_cpu: audio@3987000 {
@@ -2497,6 +2499,7 @@
 			clock-names = "bi_tcxo";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
 		};
 
 		lpass_ag_noc: interconnect@3c40000 {
@@ -2565,7 +2568,8 @@
 				    "cx_mem",
 				    "cx_dbgc";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&adreno_smmu 0 0x401>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
@@ -2739,6 +2743,7 @@
 					"gpu_cc_hub_aon_clk";
 
 			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
@@ -3296,6 +3301,7 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 
@@ -3346,49 +3352,26 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
-				     "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3416,8 +3399,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3624,6 +3607,8 @@
 			      <0 0x88e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 
+			status = "disabled";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3634,13 +3619,6 @@
 						remote-endpoint = <&usb2_role_switch>;
 					};
 				};
-
-				port@1 {
-					reg = <1>;
-					eud_con: endpoint {
-						remote-endpoint = <&con_eud>;
-					};
-				};
 			};
 		};
 
@@ -3676,9 +3654,9 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3702,7 +3680,8 @@
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3807,8 +3786,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
 				 <&mdss_dsi