diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/arm/include/asm/thread_info.h linux-libre-3.14.26-gnu/arch/arm/include/asm/thread_info.h
--- linux-libre-3.14.25-gnu/arch/arm/include/asm/thread_info.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/arm/include/asm/thread_info.h	2014-12-06 18:56:06.000000000 -0500
@@ -43,16 +43,6 @@ struct cpu_context_save {
 	__u32	extra[2];		/* Xscale 'acc' register, etc */
 };
 
-struct arm_restart_block {
-	union {
-		/* For user cache flushing */
-		struct {
-			unsigned long start;
-			unsigned long end;
-		} cache;
-	};
-};
-
 /*
  * low level task data that entry.S needs immediate access to.
  * __switch_to() assumes cpu_context follows immediately after cpu_domain.
@@ -78,7 +68,6 @@ struct thread_info {
 	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
 #endif
 	struct restart_block	restart_block;
-	struct arm_restart_block	arm_restart_block;
 };
 
 #define INIT_THREAD_INFO(tsk)						\
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/arm/kernel/traps.c linux-libre-3.14.26-gnu/arch/arm/kernel/traps.c
--- linux-libre-3.14.25-gnu/arch/arm/kernel/traps.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/arm/kernel/traps.c	2014-12-06 18:56:06.000000000 -0500
@@ -510,8 +510,6 @@ static int bad_syscall(int n, struct pt_
 	return regs->ARM_r0;
 }
 
-static long do_cache_op_restart(struct restart_block *);
-
 static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
@@ -520,24 +518,8 @@ __do_cache_op(unsigned long start, unsig
 	do {
 		unsigned long chunk = min(PAGE_SIZE, end - start);
 
-		if (signal_pending(current)) {
-			struct thread_info *ti = current_thread_info();
-
-			ti->restart_block = (struct restart_block) {
-				.fn	= do_cache_op_restart,
-			};
-
-			ti->arm_restart_block = (struct arm_restart_block) {
-				{
-					.cache = {
-						.start	= start,
-						.end	= end,
-					},
-				},
-			};
-
-			return -ERESTART_RESTARTBLOCK;
-		}
+		if (fatal_signal_pending(current))
+			return 0;
 
 		ret = flush_cache_user_range(start, start + chunk);
 		if (ret)
@@ -550,15 +532,6 @@ __do_cache_op(unsigned long start, unsig
 	return 0;
 }
 
-static long do_cache_op_restart(struct restart_block *unused)
-{
-	struct arm_restart_block *restart_block;
-
-	restart_block = &current_thread_info()->arm_restart_block;
-	return __do_cache_op(restart_block->cache.start,
-			     restart_block->cache.end);
-}
-
 static inline int
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/arm/mm/proc-v7.S linux-libre-3.14.26-gnu/arch/arm/mm/proc-v7.S
--- linux-libre-3.14.25-gnu/arch/arm/mm/proc-v7.S	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/arm/mm/proc-v7.S	2014-12-06 18:56:06.000000000 -0500
@@ -211,7 +211,6 @@ __v7_pj4b_setup:
 /* Auxiliary Debug Modes Control 1 Register */
 #define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
 #define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
-#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */
 #define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */
 
 /* Auxiliary Debug Modes Control 2 Register */
@@ -234,7 +233,6 @@ __v7_pj4b_setup:
 	/* Auxiliary Debug Modes Control 1 Register */
 	mrc	p15, 1,	r0, c15, c1, 1
 	orr     r0, r0, #PJ4B_CLEAN_LINE
-	orr     r0, r0, #PJ4B_BCK_OFF_STREX
 	orr     r0, r0, #PJ4B_INTER_PARITY
 	bic	r0, r0, #PJ4B_STATIC_BP
 	mcr	p15, 1,	r0, c15, c1, 1
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/arm/mm/proc-xscale.S linux-libre-3.14.26-gnu/arch/arm/mm/proc-xscale.S
--- linux-libre-3.14.25-gnu/arch/arm/mm/proc-xscale.S	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/arm/mm/proc-xscale.S	2014-12-06 18:56:06.000000000 -0500
@@ -535,7 +535,7 @@ ENTRY(cpu_xscale_do_suspend)
 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
 	mrc	p15, 0, r6, c13, c0, 0	@ PID
 	mrc	p15, 0, r7, c3, c0, 0	@ domain ID
-	mrc	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mrc	p15, 0, r9, c1, c0, 0	@ control reg
 	bic	r4, r4, #2		@ clear frequency change bit
 	stmia	r0, {r4 - r9}		@ store cp regs
@@ -552,7 +552,7 @@ ENTRY(cpu_xscale_do_resume)
 	mcr	p15, 0, r6, c13, c0, 0	@ PID
 	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
 	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
-	mcr	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
 ENDPROC(cpu_xscale_do_resume)
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/mips/loongson/common/Makefile linux-libre-3.14.26-gnu/arch/mips/loongson/common/Makefile
--- linux-libre-3.14.25-gnu/arch/mips/loongson/common/Makefile	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/mips/loongson/common/Makefile	2014-12-06 18:56:06.000000000 -0500
@@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o
 # Serial port support
 #
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SERIAL_8250) += serial.o
+loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
+obj-y += $(loongson-serial-m) $(loongson-serial-y)
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
 obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/mips/oprofile/backtrace.c linux-libre-3.14.26-gnu/arch/mips/oprofile/backtrace.c
--- linux-libre-3.14.25-gnu/arch/mips/oprofile/backtrace.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/mips/oprofile/backtrace.c	2014-12-06 18:56:06.000000000 -0500
@@ -92,7 +92,7 @@ static inline int unwind_user_frame(stru
 				/* This marks the end of the previous function,
 				   which means we overran. */
 				break;
-			stack_size = (unsigned) stack_adjustment;
+			stack_size = (unsigned long) stack_adjustment;
 		} else if (is_ra_save_ins(&ip)) {
 			int ra_slot = ip.i_format.simmediate;
 			if (ra_slot < 0)
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/powerpc/platforms/powernv/pci.c linux-libre-3.14.26-gnu/arch/powerpc/platforms/powernv/pci.c
--- linux-libre-3.14.25-gnu/arch/powerpc/platforms/powernv/pci.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/powerpc/platforms/powernv/pci.c	2014-12-06 18:56:06.000000000 -0500
@@ -1,3 +1,4 @@
+
 /*
  * Support PCI/PCIe on PowerNV platforms
  *
@@ -50,9 +51,8 @@ static int pnv_msi_check_device(struct p
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	struct pnv_phb *phb = hose->private_data;
-	struct pci_dn *pdn = pci_get_pdn(pdev);
 
-	if (pdn && pdn->force_32bit_msi && !phb->msi32_support)
+	if (pdev->no_64bit_msi && !phb->msi32_support)
 		return -ENODEV;
 
 	return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV;
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/powerpc/platforms/powernv/pci-ioda.c linux-libre-3.14.26-gnu/arch/powerpc/platforms/powernv/pci-ioda.c
--- linux-libre-3.14.25-gnu/arch/powerpc/platforms/powernv/pci-ioda.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/powerpc/platforms/powernv/pci-ioda.c	2014-12-06 18:56:06.000000000 -0500
@@ -902,7 +902,6 @@ static int pnv_pci_ioda_msi_setup(struct
 				  unsigned int is_64, struct msi_msg *msg)
 {
 	struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
-	struct pci_dn *pdn = pci_get_pdn(dev);
 	struct irq_data *idata;
 	struct irq_chip *ichip;
 	unsigned int xive_num = hwirq - phb->msi_base;
@@ -918,7 +917,7 @@ static int pnv_pci_ioda_msi_setup(struct
 		return -ENXIO;
 
 	/* Force 32-bit MSI on some broken devices */
-	if (pdn && pdn->force_32bit_msi)
+	if (dev->no_64bit_msi)
 		is_64 = 0;
 
 	/* Assign XIVE to PE */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/powerpc/platforms/pseries/msi.c linux-libre-3.14.26-gnu/arch/powerpc/platforms/pseries/msi.c
--- linux-libre-3.14.25-gnu/arch/powerpc/platforms/pseries/msi.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/powerpc/platforms/pseries/msi.c	2014-12-06 18:56:06.000000000 -0500
@@ -428,7 +428,7 @@ static int rtas_setup_msi_irqs(struct pc
 	 */
 again:
 	if (type == PCI_CAP_ID_MSI) {
-		if (pdn->force_32bit_msi) {
+		if (pdev->no_64bit_msi) {
 			rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec);
 			if (rc < 0) {
 				/*
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/powerpc/xmon/xmon.c linux-libre-3.14.26-gnu/arch/powerpc/xmon/xmon.c
--- linux-libre-3.14.25-gnu/arch/powerpc/xmon/xmon.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/powerpc/xmon/xmon.c	2014-12-06 18:56:06.000000000 -0500
@@ -288,10 +288,10 @@ static inline void disable_surveillance(
 	args.token = rtas_token("set-indicator");
 	if (args.token == RTAS_UNKNOWN_SERVICE)
 		return;
-	args.nargs = 3;
-	args.nret = 1;
+	args.nargs = cpu_to_be32(3);
+	args.nret = cpu_to_be32(1);
 	args.rets = &args.args[3];
-	args.args[0] = SURVEILLANCE_TOKEN;
+	args.args[0] = cpu_to_be32(SURVEILLANCE_TOKEN);
 	args.args[1] = 0;
 	args.args[2] = 0;
 	enter_rtas(__pa(&args));
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/sparc/include/uapi/asm/swab.h linux-libre-3.14.26-gnu/arch/sparc/include/uapi/asm/swab.h
--- linux-libre-3.14.25-gnu/arch/sparc/include/uapi/asm/swab.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/sparc/include/uapi/asm/swab.h	2014-12-06 18:56:06.000000000 -0500
@@ -9,9 +9,9 @@ static inline __u16 __arch_swab16p(const
 {
 	__u16 ret;
 
-	__asm__ __volatile__ ("lduha [%1] %2, %0"
+	__asm__ __volatile__ ("lduha [%2] %3, %0"
 			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
+			      : "m" (*addr), "r" (addr), "i" (ASI_PL));
 	return ret;
 }
 #define __arch_swab16p __arch_swab16p
@@ -20,9 +20,9 @@ static inline __u32 __arch_swab32p(const
 {
 	__u32 ret;
 
-	__asm__ __volatile__ ("lduwa [%1] %2, %0"
+	__asm__ __volatile__ ("lduwa [%2] %3, %0"
 			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
+			      : "m" (*addr), "r" (addr), "i" (ASI_PL));
 	return ret;
 }
 #define __arch_swab32p __arch_swab32p
@@ -31,9 +31,9 @@ static inline __u64 __arch_swab64p(const
 {
 	__u64 ret;
 
-	__asm__ __volatile__ ("ldxa [%1] %2, %0"
+	__asm__ __volatile__ ("ldxa [%2] %3, %0"
 			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
+			      : "m" (*addr), "r" (addr), "i" (ASI_PL));
 	return ret;
 }
 #define __arch_swab64p __arch_swab64p
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/include/asm/cpufeature.h linux-libre-3.14.26-gnu/arch/x86/include/asm/cpufeature.h
--- linux-libre-3.14.25-gnu/arch/x86/include/asm/cpufeature.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/include/asm/cpufeature.h	2014-12-06 18:56:06.000000000 -0500
@@ -203,6 +203,7 @@
 #define X86_FEATURE_DECODEASSISTS (8*32+12) /* AMD Decode Assists support */
 #define X86_FEATURE_PAUSEFILTER (8*32+13) /* AMD filtered pause intercept */
 #define X86_FEATURE_PFTHRESHOLD (8*32+14) /* AMD pause filter threshold */
+#define X86_FEATURE_VMMCALL	(8*32+15) /* Prefer vmmcall to vmcall */
 
 
 /* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/include/asm/kvm_para.h linux-libre-3.14.26-gnu/arch/x86/include/asm/kvm_para.h
--- linux-libre-3.14.25-gnu/arch/x86/include/asm/kvm_para.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/include/asm/kvm_para.h	2014-12-06 18:56:06.000000000 -0500
@@ -2,6 +2,7 @@
 #define _ASM_X86_KVM_PARA_H
 
 #include <asm/processor.h>
+#include <asm/alternative.h>
 #include <uapi/asm/kvm_para.h>
 
 extern void kvmclock_init(void);
@@ -16,10 +17,15 @@ static inline bool kvm_check_and_clear_g
 }
 #endif /* CONFIG_KVM_GUEST */
 
-/* This instruction is vmcall.  On non-VT architectures, it will generate a
- * trap that we will then rewrite to the appropriate instruction.
+#ifdef CONFIG_DEBUG_RODATA
+#define KVM_HYPERCALL \
+        ALTERNATIVE(".byte 0x0f,0x01,0xc1", ".byte 0x0f,0x01,0xd9", X86_FEATURE_VMMCALL)
+#else
+/* On AMD processors, vmcall will generate a trap that we will
+ * then rewrite to the appropriate instruction.
  */
 #define KVM_HYPERCALL ".byte 0x0f,0x01,0xc1"
+#endif
 
 /* For KVM hypercalls, a three-byte sequence of either the vmcall or the vmmcall
  * instruction.  The hypervisor may replace it with something else but only the
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/include/asm/page_32_types.h linux-libre-3.14.26-gnu/arch/x86/include/asm/page_32_types.h
--- linux-libre-3.14.25-gnu/arch/x86/include/asm/page_32_types.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/include/asm/page_32_types.h	2014-12-06 18:56:06.000000000 -0500
@@ -20,7 +20,6 @@
 #define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 
-#define STACKFAULT_STACK 0
 #define DOUBLEFAULT_STACK 1
 #define NMI_STACK 0
 #define DEBUG_STACK 0
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/include/asm/page_64_types.h linux-libre-3.14.26-gnu/arch/x86/include/asm/page_64_types.h
--- linux-libre-3.14.25-gnu/arch/x86/include/asm/page_64_types.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/include/asm/page_64_types.h	2014-12-06 18:56:06.000000000 -0500
@@ -14,12 +14,11 @@
 #define IRQ_STACK_ORDER 2
 #define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
 
-#define STACKFAULT_STACK 1
-#define DOUBLEFAULT_STACK 2
-#define NMI_STACK 3
-#define DEBUG_STACK 4
-#define MCE_STACK 5
-#define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
+#define DOUBLEFAULT_STACK 1
+#define NMI_STACK 2
+#define DEBUG_STACK 3
+#define MCE_STACK 4
+#define N_EXCEPTION_STACKS 4  /* hw limit: 7 */
 
 #define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
 #define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/include/asm/thread_info.h linux-libre-3.14.26-gnu/arch/x86/include/asm/thread_info.h
--- linux-libre-3.14.25-gnu/arch/x86/include/asm/thread_info.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/include/asm/thread_info.h	2014-12-06 18:56:06.000000000 -0500
@@ -144,7 +144,7 @@ struct thread_info {
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
 	(_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME |	\
-	 _TIF_USER_RETURN_NOTIFY)
+	 _TIF_USER_RETURN_NOTIFY | _TIF_UPROBE)
 
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW							\
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/include/asm/traps.h linux-libre-3.14.26-gnu/arch/x86/include/asm/traps.h
--- linux-libre-3.14.25-gnu/arch/x86/include/asm/traps.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/include/asm/traps.h	2014-12-06 18:56:06.000000000 -0500
@@ -39,6 +39,7 @@ asmlinkage void simd_coprocessor_error(v
 
 #ifdef CONFIG_TRACING
 asmlinkage void trace_page_fault(void);
+#define trace_stack_segment stack_segment
 #define trace_divide_error divide_error
 #define trace_bounds bounds
 #define trace_invalid_op invalid_op
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/kernel/cpu/amd.c linux-libre-3.14.26-gnu/arch/x86/kernel/cpu/amd.c
--- linux-libre-3.14.25-gnu/arch/x86/kernel/cpu/amd.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/kernel/cpu/amd.c	2014-12-06 18:56:06.000000000 -0500
@@ -508,6 +508,13 @@ static void early_init_amd(struct cpuinf
 	}
 #endif
 
+	/*
+	 * This is only needed to tell the kernel whether to use VMCALL
+	 * and VMMCALL.  VMMCALL is never executed except under virt, so
+	 * we can set it unconditionally.
+	 */
+	set_cpu_cap(c, X86_FEATURE_VMMCALL);
+
 	/* F16h erratum 793, CVE-2013-6885 */
 	if (c->x86 == 0x16 && c->x86_model <= 0xf) {
 		u64 val;
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/kernel/cpu/common.c linux-libre-3.14.26-gnu/arch/x86/kernel/cpu/common.c
--- linux-libre-3.14.25-gnu/arch/x86/kernel/cpu/common.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/kernel/cpu/common.c	2014-12-06 18:56:06.000000000 -0500
@@ -144,6 +144,8 @@ EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
 static int __init x86_xsave_setup(char *s)
 {
+	if (strlen(s))
+		return 0;
 	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
 	setup_clear_cpu_cap(X86_FEATURE_AVX);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/kernel/dumpstack_64.c linux-libre-3.14.26-gnu/arch/x86/kernel/dumpstack_64.c
--- linux-libre-3.14.25-gnu/arch/x86/kernel/dumpstack_64.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/kernel/dumpstack_64.c	2014-12-06 18:56:06.000000000 -0500
@@ -24,7 +24,6 @@ static char x86_stack_ids[][8] = {
 		[ DEBUG_STACK-1			]	= "#DB",
 		[ NMI_STACK-1			]	= "NMI",
 		[ DOUBLEFAULT_STACK-1		]	= "#DF",
-		[ STACKFAULT_STACK-1		]	= "#SS",
 		[ MCE_STACK-1			]	= "#MC",
 #if DEBUG_STKSZ > EXCEPTION_STKSZ
 		[ N_EXCEPTION_STACKS ...
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/kernel/entry_64.S linux-libre-3.14.26-gnu/arch/x86/kernel/entry_64.S
--- linux-libre-3.14.25-gnu/arch/x86/kernel/entry_64.S	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/kernel/entry_64.S	2014-12-06 18:56:06.000000000 -0500
@@ -1053,9 +1053,15 @@ ENTRY(native_iret)
 	jnz native_irq_return_ldt
 #endif
 
+.global native_irq_return_iret
 native_irq_return_iret:
+	/*
+	 * This may fault.  Non-paranoid faults on return to userspace are
+	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
+	 * Double-faults due to espfix64 are handled in do_double_fault.
+	 * Other faults here are fatal.
+	 */
 	iretq
-	_ASM_EXTABLE(native_irq_return_iret, bad_iret)
 
 #ifdef CONFIG_X86_ESPFIX64
 native_irq_return_ldt:
@@ -1083,25 +1089,6 @@ native_irq_return_ldt:
 	jmp native_irq_return_iret
 #endif
 
-	.section .fixup,"ax"
-bad_iret:
-	/*
-	 * The iret traps when the %cs or %ss being restored is bogus.
-	 * We've lost the original trap vector and error code.
-	 * #GPF is the most likely one to get for an invalid selector.
-	 * So pretend we completed the iret and took the #GPF in user mode.
-	 *
-	 * We are now running with the kernel GS after exception recovery.
-	 * But error_entry expects us to have user GS to match the user %cs,
-	 * so swap back.
-	 */
-	pushq $0
-
-	SWAPGS
-	jmp general_protection
-
-	.previous
-
 	/* edi: workmask, edx: work */
 retint_careful:
 	CFI_RESTORE_STATE
@@ -1147,37 +1134,6 @@ ENTRY(retint_kernel)
 	CFI_ENDPROC
 END(common_interrupt)
 
-	/*
-	 * If IRET takes a fault on the espfix stack, then we
-	 * end up promoting it to a doublefault.  In that case,
-	 * modify the stack to make it look like we just entered
-	 * the #GP handler from user space, similar to bad_iret.
-	 */
-#ifdef CONFIG_X86_ESPFIX64
-	ALIGN
-__do_double_fault:
-	XCPT_FRAME 1 RDI+8
-	movq RSP(%rdi),%rax		/* Trap on the espfix stack? */
-	sarq $PGDIR_SHIFT,%rax
-	cmpl $ESPFIX_PGD_ENTRY,%eax
-	jne do_double_fault		/* No, just deliver the fault */
-	cmpl $__KERNEL_CS,CS(%rdi)
-	jne do_double_fault
-	movq RIP(%rdi),%rax
-	cmpq $native_irq_return_iret,%rax
-	jne do_double_fault		/* This shouldn't happen... */
-	movq PER_CPU_VAR(kernel_stack),%rax
-	subq $(6*8-KERNEL_STACK_OFFSET),%rax	/* Reset to original stack */
-	movq %rax,RSP(%rdi)
-	movq $0,(%rax)			/* Missing (lost) #GP error code */
-	movq $general_protection,RIP(%rdi)
-	retq
-	CFI_ENDPROC
-END(__do_double_fault)
-#else
-# define __do_double_fault do_double_fault
-#endif
-
 /*
  * End of kprobes section
  */
@@ -1379,7 +1335,7 @@ zeroentry overflow do_overflow
 zeroentry bounds do_bounds
 zeroentry invalid_op do_invalid_op
 zeroentry device_not_available do_device_not_available
-paranoiderrorentry double_fault __do_double_fault
+paranoiderrorentry double_fault do_double_fault
 zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun
 errorentry invalid_TSS do_invalid_TSS
 errorentry segment_not_present do_segment_not_present
@@ -1549,7 +1505,7 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTO
 
 paranoidzeroentry_ist debug do_debug DEBUG_STACK
 paranoidzeroentry_ist int3 do_int3 DEBUG_STACK
-paranoiderrorentry stack_segment do_stack_segment
+errorentry stack_segment do_stack_segment
 #ifdef CONFIG_XEN
 zeroentry xen_debug do_debug
 zeroentry xen_int3 do_int3
@@ -1659,16 +1615,15 @@ error_sti:
 
 /*
  * There are two places in the kernel that can potentially fault with
- * usergs. Handle them here. The exception handlers after iret run with
- * kernel gs again, so don't set the user space flag. B stepping K8s
- * sometimes report an truncated RIP for IRET exceptions returning to
- * compat mode. Check for these here too.
+ * usergs. Handle them here.  B stepping K8s sometimes report a
+ * truncated RIP for IRET exceptions returning to compat mode. Check
+ * for these here too.
  */
 error_kernelspace:
 	incl %ebx
 	leaq native_irq_return_iret(%rip),%rcx
 	cmpq %rcx,RIP+8(%rsp)
-	je error_swapgs
+	je error_bad_iret
 	movl %ecx,%eax	/* zero extend */
 	cmpq %rax,RIP+8(%rsp)
 	je bstep_iret
@@ -1679,7 +1634,15 @@ error_kernelspace:
 bstep_iret:
 	/* Fix truncated RIP */
 	movq %rcx,RIP+8(%rsp)
-	jmp error_swapgs
+	/* fall through */
+
+error_bad_iret:
+	SWAPGS
+	mov %rsp,%rdi
+	call fixup_bad_iret
+	mov %rax,%rsp
+	decl %ebx	/* Return to usergs */
+	jmp error_sti
 	CFI_ENDPROC
 END(error_entry)
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/kernel/traps.c linux-libre-3.14.26-gnu/arch/x86/kernel/traps.c
--- linux-libre-3.14.25-gnu/arch/x86/kernel/traps.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/kernel/traps.c	2014-12-06 18:56:06.000000000 -0500
@@ -218,32 +218,40 @@ DO_ERROR_INFO(X86_TRAP_UD,     SIGILL,
 DO_ERROR     (X86_TRAP_OLD_MF, SIGFPE,  "coprocessor segment overrun",	coprocessor_segment_overrun			  )
 DO_ERROR     (X86_TRAP_TS,     SIGSEGV, "invalid TSS",			invalid_TSS					  )
 DO_ERROR     (X86_TRAP_NP,     SIGBUS,  "segment not present",		segment_not_present				  )
-#ifdef CONFIG_X86_32
 DO_ERROR     (X86_TRAP_SS,     SIGBUS,  "stack segment",		stack_segment					  )
-#endif
 DO_ERROR_INFO(X86_TRAP_AC,     SIGBUS,  "alignment check",		alignment_check,	     BUS_ADRALN, 0	  )
 
 #ifdef CONFIG_X86_64
 /* Runs on IST stack */
-dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
-{
-	enum ctx_state prev_state;
-
-	prev_state = exception_enter();
-	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
-		       X86_TRAP_SS, SIGBUS) != NOTIFY_STOP) {
-		preempt_conditional_sti(regs);
-		do_trap(X86_TRAP_SS, SIGBUS, "stack segment", regs, error_code, NULL);
-		preempt_conditional_cli(regs);
-	}
-	exception_exit(prev_state);
-}
-
 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 {
 	static const char str[] = "double fault";
 	struct task_struct *tsk = current;
 
+#ifdef CONFIG_X86_ESPFIX64
+	extern unsigned char native_irq_return_iret[];
+
+	/*
+	 * If IRET takes a non-IST fault on the espfix64 stack, then we
+	 * end up promoting it to a doublefault.  In that case, modify
+	 * the stack to make it look like we just entered the #GP
+	 * handler from user space, similar to bad_iret.
+	 */
+	if (((long)regs->sp >> PGDIR_SHIFT) == ESPFIX_PGD_ENTRY &&
+		regs->cs == __KERNEL_CS &&
+		regs->ip == (unsigned long)native_irq_return_iret)
+	{
+		struct pt_regs *normal_regs = task_pt_regs(current);
+
+		/* Fake a #GP(0) from userspace. */
+		memmove(&normal_regs->ip, (void *)regs->sp, 5*8);
+		normal_regs->orig_ax = 0;  /* Missing (lost) #GP error code */
+		regs->ip = (unsigned long)general_protection;
+		regs->sp = (unsigned long)&normal_regs->orig_ax;
+		return;
+	}
+#endif
+
 	exception_enter();
 	/* Return not checked because double check cannot be ignored */
 	notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);
@@ -376,6 +384,35 @@ asmlinkage __kprobes struct pt_regs *syn
 		*regs = *eregs;
 	return regs;
 }
+
+struct bad_iret_stack {
+	void *error_entry_ret;
+	struct pt_regs regs;
+};
+
+asmlinkage __visible
+struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
+{
+	/*
+	 * This is called from entry_64.S early in handling a fault
+	 * caused by a bad iret to user mode.  To handle the fault
+	 * correctly, we want move our stack frame to task_pt_regs
+	 * and we want to pretend that the exception came from the
+	 * iret target.
+	 */
+	struct bad_iret_stack *new_stack =
+		container_of(task_pt_regs(current),
+			     struct bad_iret_stack, regs);
+
+	/* Copy the IRET target to the new stack. */
+	memmove(&new_stack->regs.ip, (void *)s->regs.sp, 5*8);
+
+	/* Copy the remainder of the stack from the current stack. */
+	memmove(new_stack, s, offsetof(struct bad_iret_stack, regs.ip));
+
+	BUG_ON(!user_mode_vm(&new_stack->regs));
+	return new_stack;
+}
 #endif
 
 /*
@@ -748,7 +785,7 @@ void __init trap_init(void)
 	set_intr_gate(X86_TRAP_OLD_MF, coprocessor_segment_overrun);
 	set_intr_gate(X86_TRAP_TS, invalid_TSS);
 	set_intr_gate(X86_TRAP_NP, segment_not_present);
-	set_intr_gate_ist(X86_TRAP_SS, &stack_segment, STACKFAULT_STACK);
+	set_intr_gate(X86_TRAP_SS, stack_segment);
 	set_intr_gate(X86_TRAP_GP, general_protection);
 	set_intr_gate(X86_TRAP_SPURIOUS, spurious_interrupt_bug);
 	set_intr_gate(X86_TRAP_MF, coprocessor_error);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/mm/init_64.c linux-libre-3.14.26-gnu/arch/x86/mm/init_64.c
--- linux-libre-3.14.25-gnu/arch/x86/mm/init_64.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/mm/init_64.c	2014-12-06 18:56:06.000000000 -0500
@@ -1110,7 +1110,7 @@ void mark_rodata_ro(void)
 	unsigned long end = (unsigned long) &__end_rodata_hpage_align;
 	unsigned long text_end = PFN_ALIGN(&__stop___ex_table);
 	unsigned long rodata_end = PFN_ALIGN(&__end_rodata);
-	unsigned long all_end = PFN_ALIGN(&_end);
+	unsigned long all_end;
 
 	printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
 	       (end - start) >> 10);
@@ -1121,7 +1121,16 @@ void mark_rodata_ro(void)
 	/*
 	 * The rodata/data/bss/brk section (but not the kernel text!)
 	 * should also be not-executable.
+	 *
+	 * We align all_end to PMD_SIZE because the existing mapping
+	 * is a full PMD. If we would align _brk_end to PAGE_SIZE we
+	 * split the PMD and the reminder between _brk_end and the end
+	 * of the PMD will remain mapped executable.
+	 *
+	 * Any PMD which was setup after the one which covers _brk_end
+	 * has been zapped already via cleanup_highmem().
 	 */
+	all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
 	set_memory_nx(rodata_start, (all_end - rodata_start) >> PAGE_SHIFT);
 
 	rodata_test();
diff -druNp --no-dereference linux-libre-3.14.25-gnu/arch/x86/tools/calc_run_size.pl linux-libre-3.14.26-gnu/arch/x86/tools/calc_run_size.pl
--- linux-libre-3.14.25-gnu/arch/x86/tools/calc_run_size.pl	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/arch/x86/tools/calc_run_size.pl	2014-12-06 18:56:06.000000000 -0500
@@ -19,7 +19,16 @@ while (<>) {
 		if ($file_offset == 0) {
 			$file_offset = $offset;
 		} elsif ($file_offset != $offset) {
-			die ".bss and .brk lack common file offset\n";
+			# BFD linker shows the same file offset in ELF.
+			# Gold linker shows them as consecutive.
+			next if ($file_offset + $mem_size == $offset + $size);
+
+			printf STDERR "file_offset: 0x%lx\n", $file_offset;
+			printf STDERR "mem_size: 0x%lx\n", $mem_size;
+			printf STDERR "offset: 0x%lx\n", $offset;
+			printf STDERR "size: 0x%lx\n", $size;
+
+			die ".bss and .brk are non-contiguous\n";
 		}
 	}
 }
diff -druNp --no-dereference linux-libre-3.14.25-gnu/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt linux-libre-3.14.26-gnu/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
--- linux-libre-3.14.25-gnu/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt	2014-12-06 18:56:06.000000000 -0500
@@ -30,10 +30,6 @@ should only be used when a device has mu
   Example:
 	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
 
-A device node may contain either "interrupts" or "interrupts-extended", but not
-both. If both properties are present, then the operating system should log an
-error and use only the data in "interrupts".
-
 2) Interrupt controller nodes
 -----------------------------
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/clocksource/sun4i_timer.c linux-libre-3.14.26-gnu/drivers/clocksource/sun4i_timer.c
--- linux-libre-3.14.25-gnu/drivers/clocksource/sun4i_timer.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/clocksource/sun4i_timer.c	2014-12-06 18:56:06.000000000 -0500
@@ -182,6 +182,12 @@ static void __init sun4i_timer_init(stru
 	/* Make sure timer is stopped before playing with interrupts */
 	sun4i_clkevt_time_stop(0);
 
+	sun4i_clockevent.cpumask = cpu_possible_mask;
+	sun4i_clockevent.irq = irq;
+
+	clockevents_config_and_register(&sun4i_clockevent, rate,
+					TIMER_SYNC_TICKS, 0xffffffff);
+
 	ret = setup_irq(irq, &sun4i_timer_irq);
 	if (ret)
 		pr_warn("failed to setup irq %d\n", irq);
@@ -189,12 +195,6 @@ static void __init sun4i_timer_init(stru
 	/* Enable timer0 interrupt */
 	val = readl(timer_base + TIMER_IRQ_EN_REG);
 	writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
-
-	sun4i_clockevent.cpumask = cpu_possible_mask;
-	sun4i_clockevent.irq = irq;
-
-	clockevents_config_and_register(&sun4i_clockevent, rate,
-					TIMER_SYNC_TICKS, 0xffffffff);
 }
 CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer",
 		       sun4i_timer_init);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/gpu/drm/radeon/r600_dpm.c linux-libre-3.14.26-gnu/drivers/gpu/drm/radeon/r600_dpm.c
--- linux-libre-3.14.25-gnu/drivers/gpu/drm/radeon/r600_dpm.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/gpu/drm/radeon/r600_dpm.c	2014-12-06 18:56:06.000000000 -0500
@@ -1209,7 +1209,7 @@ int r600_parse_extended_power_table(stru
 					(mode_info->atom_context->bios + data_offset +
 					 le16_to_cpu(ext_hdr->usPowerTuneTableOffset));
 				rdev->pm.dpm.dyn_state.cac_tdp_table->maximum_power_delivery_limit =
-					ppt->usMaximumPowerDeliveryLimit;
+					le16_to_cpu(ppt->usMaximumPowerDeliveryLimit);
 				pt = &ppt->power_tune_table;
 			} else {
 				ATOM_PPLIB_POWERTUNE_Table *ppt = (ATOM_PPLIB_POWERTUNE_Table *)
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/gpu/drm/radeon/radeon_irq_kms.c linux-libre-3.14.26-gnu/drivers/gpu/drm/radeon/radeon_irq_kms.c
--- linux-libre-3.14.25-gnu/drivers/gpu/drm/radeon/radeon_irq_kms.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/gpu/drm/radeon/radeon_irq_kms.c	2014-12-06 18:56:06.000000000 -0500
@@ -202,6 +202,16 @@ static bool radeon_msi_ok(struct radeon_
 	if (rdev->flags & RADEON_IS_AGP)
 		return false;
 
+	/*
+	 * Older chips have a HW limitation, they can only generate 40 bits
+	 * of address for "64-bit" MSIs which breaks on some platforms, notably
+	 * IBM POWER servers, so we limit them
+	 */
+	if (rdev->family < CHIP_BONAIRE) {
+		dev_info(rdev->dev, "radeon: MSI limited to 32-bit\n");
+		rdev->pdev->no_64bit_msi = 1;
+	}
+
 	/* force MSI on */
 	if (radeon_msi == 1)
 		return true;
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/infiniband/ulp/isert/ib_isert.c linux-libre-3.14.26-gnu/drivers/infiniband/ulp/isert/ib_isert.c
--- linux-libre-3.14.25-gnu/drivers/infiniband/ulp/isert/ib_isert.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/infiniband/ulp/isert/ib_isert.c	2014-12-06 18:56:06.000000000 -0500
@@ -112,9 +112,12 @@ isert_conn_setup_qp(struct isert_conn *i
 	attr.cap.max_recv_wr = ISERT_QP_MAX_RECV_DTOS;
 	/*
 	 * FIXME: Use devattr.max_sge - 2 for max_send_sge as
-	 * work-around for RDMA_READ..
+	 * work-around for RDMA_READs with ConnectX-2.
+	 *
+	 * Also, still make sure to have at least two SGEs for
+	 * outgoing control PDU responses.
 	 */
-	attr.cap.max_send_sge = device->dev_attr.max_sge - 2;
+	attr.cap.max_send_sge = max(2, device->dev_attr.max_sge - 2);
 	isert_conn->max_sge = attr.cap.max_send_sge;
 
 	attr.cap.max_recv_sge = 1;
@@ -220,12 +223,16 @@ isert_create_device_ib_res(struct isert_
 	struct isert_cq_desc *cq_desc;
 	struct ib_device_attr *dev_attr;
 	int ret = 0, i, j;
+	int max_rx_cqe, max_tx_cqe;
 
 	dev_attr = &device->dev_attr;
 	ret = isert_query_device(ib_dev, dev_attr);
 	if (ret)
 		return ret;
 
+	max_rx_cqe = min(ISER_MAX_RX_CQ_LEN, dev_attr->max_cqe);
+	max_tx_cqe = min(ISER_MAX_TX_CQ_LEN, dev_attr->max_cqe);
+
 	/* asign function handlers */
 	if (dev_attr->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS) {
 		device->use_fastreg = 1;
@@ -261,7 +268,7 @@ isert_create_device_ib_res(struct isert_
 						isert_cq_rx_callback,
 						isert_cq_event_callback,
 						(void *)&cq_desc[i],
-						ISER_MAX_RX_CQ_LEN, i);
+						max_rx_cqe, i);
 		if (IS_ERR(device->dev_rx_cq[i])) {
 			ret = PTR_ERR(device->dev_rx_cq[i]);
 			device->dev_rx_cq[i] = NULL;
@@ -273,7 +280,7 @@ isert_create_device_ib_res(struct isert_
 						isert_cq_tx_callback,
 						isert_cq_event_callback,
 						(void *)&cq_desc[i],
-						ISER_MAX_TX_CQ_LEN, i);
+						max_tx_cqe, i);
 		if (IS_ERR(device->dev_tx_cq[i])) {
 			ret = PTR_ERR(device->dev_tx_cq[i]);
 			device->dev_tx_cq[i] = NULL;
@@ -718,14 +725,25 @@ wake_up:
 	complete(&isert_conn->conn_wait);
 }
 
-static void
+static int
 isert_disconnected_handler(struct rdma_cm_id *cma_id, bool disconnect)
 {
-	struct isert_conn *isert_conn = (struct isert_conn *)cma_id->context;
+	struct isert_conn *isert_conn;
+
+	if (!cma_id->qp) {
+		struct isert_np *isert_np = cma_id->context;
+
+		isert_np->np_cm_id = NULL;
+		return -1;
+	}
+
+	isert_conn = (struct isert_conn *)cma_id->context;
 
 	isert_conn->disconnect = disconnect;
 	INIT_WORK(&isert_conn->conn_logout_work, isert_disconnect_work);
 	schedule_work(&isert_conn->conn_logout_work);
+
+	return 0;
 }
 
 static int
@@ -740,6 +758,9 @@ isert_cma_handler(struct rdma_cm_id *cma
 	switch (event->event) {
 	case RDMA_CM_EVENT_CONNECT_REQUEST:
 		ret = isert_connect_request(cma_id, event);
+		if (ret)
+			pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n",
+				event->event, ret);
 		break;
 	case RDMA_CM_EVENT_ESTABLISHED:
 		isert_connected_handler(cma_id);
@@ -749,7 +770,7 @@ isert_cma_handler(struct rdma_cm_id *cma
 	case RDMA_CM_EVENT_DEVICE_REMOVAL: /* FALLTHRU */
 		disconnect = true;
 	case RDMA_CM_EVENT_TIMEWAIT_EXIT:  /* FALLTHRU */
-		isert_disconnected_handler(cma_id, disconnect);
+		ret = isert_disconnected_handler(cma_id, disconnect);
 		break;
 	case RDMA_CM_EVENT_CONNECT_ERROR:
 	default:
@@ -757,12 +778,6 @@ isert_cma_handler(struct rdma_cm_id *cma
 		break;
 	}
 
-	if (ret != 0) {
-		pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n",
-		       event->event, ret);
-		dump_stack();
-	}
-
 	return ret;
 }
 
@@ -970,7 +985,8 @@ isert_put_login_tx(struct iscsi_conn *co
 	}
 	if (!login->login_failed) {
 		if (login->login_complete) {
-			if (isert_conn->conn_device->use_fastreg) {
+			if (!conn->sess->sess_ops->SessionType &&
+			    isert_conn->conn_device->use_fastreg) {
 				ret = isert_conn_create_fastreg_pool(isert_conn);
 				if (ret) {
 					pr_err("Conn: %p failed to create"
@@ -1937,7 +1953,7 @@ isert_put_response(struct iscsi_conn *co
 		isert_cmd->tx_desc.num_sge = 2;
 	}
 
-	isert_init_send_wr(isert_conn, isert_cmd, send_wr, true);
+	isert_init_send_wr(isert_conn, isert_cmd, send_wr, false);
 
 	pr_debug("Posting SCSI Response IB_WR_SEND >>>>>>>>>>>>>>>>>>>>>>\n");
 
@@ -2456,7 +2472,7 @@ isert_put_datain(struct iscsi_conn *conn
 			     &isert_cmd->tx_desc.iscsi_header);
 	isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc);
 	isert_init_send_wr(isert_conn, isert_cmd,
-			   &isert_cmd->tx_desc.send_wr, true);
+			   &isert_cmd->tx_desc.send_wr, false);
 
 	atomic_add(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
 
@@ -2768,7 +2784,8 @@ isert_free_np(struct iscsi_np *np)
 {
 	struct isert_np *isert_np = (struct isert_np *)np->np_context;
 
-	rdma_destroy_id(isert_np->np_cm_id);
+	if (isert_np->np_cm_id)
+		rdma_destroy_id(isert_np->np_cm_id);
 
 	np->np_context = NULL;
 	kfree(isert_np);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/infiniband/ulp/srpt/ib_srpt.c linux-libre-3.14.26-gnu/drivers/infiniband/ulp/srpt/ib_srpt.c
--- linux-libre-3.14.25-gnu/drivers/infiniband/ulp/srpt/ib_srpt.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/infiniband/ulp/srpt/ib_srpt.c	2014-12-06 18:56:06.000000000 -0500
@@ -2091,6 +2091,7 @@ static int srpt_create_ch_ib(struct srpt
 	if (!qp_init)
 		goto out;
 
+retry:
 	ch->cq = ib_create_cq(sdev->device, srpt_completion, NULL, ch,
 			      ch->rq_size + srp_sq_size, 0);
 	if (IS_ERR(ch->cq)) {
@@ -2114,6 +2115,13 @@ static int srpt_create_ch_ib(struct srpt
 	ch->qp = ib_create_qp(sdev->pd, qp_init);
 	if (IS_ERR(ch->qp)) {
 		ret = PTR_ERR(ch->qp);
+		if (ret == -ENOMEM) {
+			srp_sq_size /= 2;
+			if (srp_sq_size >= MIN_SRPT_SQ_SIZE) {
+				ib_destroy_cq(ch->cq);
+				goto retry;
+			}
+		}
 		printk(KERN_ERR "failed to create_qp ret= %d\n", ret);
 		goto err_destroy_cq;
 	}
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/input/joystick/xpad.c linux-libre-3.14.26-gnu/drivers/input/joystick/xpad.c
--- linux-libre-3.14.25-gnu/drivers/input/joystick/xpad.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/input/joystick/xpad.c	2014-12-06 18:56:06.000000000 -0500
@@ -1003,9 +1003,19 @@ static int xpad_probe(struct usb_interfa
 		}
 
 		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
-		usb_fill_bulk_urb(xpad->bulk_out, udev,
-				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
-				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+		if (usb_endpoint_is_bulk_out(ep_irq_in)) {
+			usb_fill_bulk_urb(xpad->bulk_out, udev,
+					  usb_sndbulkpipe(udev,
+							  ep_irq_in->bEndpointAddress),
+					  xpad->bdata, XPAD_PKT_LEN,
+					  xpad_bulk_out, xpad);
+		} else {
+			usb_fill_int_urb(xpad->bulk_out, udev,
+					 usb_sndintpipe(udev,
+							ep_irq_in->bEndpointAddress),
+					 xpad->bdata, XPAD_PKT_LEN,
+					 xpad_bulk_out, xpad, 0);
+		}
 
 		/*
 		 * Submit the int URB immediately rather than waiting for open
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/input/mouse/synaptics.c linux-libre-3.14.26-gnu/drivers/input/mouse/synaptics.c
--- linux-libre-3.14.25-gnu/drivers/input/mouse/synaptics.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/input/mouse/synaptics.c	2014-12-06 18:56:06.000000000 -0500
@@ -140,6 +140,10 @@ static const struct min_max_quirk min_ma
 		(const char * const []){"LEN2001", NULL},
 		1024, 5022, 2508, 4832
 	},
+	{
+		(const char * const []){"LEN2006", NULL},
+		1264, 5675, 1171, 4688
+	},
 	{ }
 };
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/bonding/bond_main.c linux-libre-3.14.26-gnu/drivers/net/bonding/bond_main.c
--- linux-libre-3.14.25-gnu/drivers/net/bonding/bond_main.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/bonding/bond_main.c	2014-12-06 18:56:06.000000000 -0500
@@ -2450,9 +2450,9 @@ static void bond_loadbalance_arp_mon(str
 		if (!rtnl_trylock())
 			goto re_arm;
 
-		if (slave_state_changed) {
+		if (slave_state_changed)
 			bond_slave_state_change(bond);
-		} else if (do_failover) {
+		if (do_failover) {
 			/* the bond_select_active_slave must hold RTNL
 			 * and curr_slave_lock for write.
 			 */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/can/dev.c linux-libre-3.14.26-gnu/drivers/net/can/dev.c
--- linux-libre-3.14.25-gnu/drivers/net/can/dev.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/can/dev.c	2014-12-06 18:56:06.000000000 -0500
@@ -384,7 +384,7 @@ void can_free_echo_skb(struct net_device
 	BUG_ON(idx >= priv->echo_skb_max);
 
 	if (priv->echo_skb[idx]) {
-		kfree_skb(priv->echo_skb[idx]);
+		dev_kfree_skb_any(priv->echo_skb[idx]);
 		priv->echo_skb[idx] = NULL;
 	}
 }
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/can/usb/esd_usb2.c linux-libre-3.14.26-gnu/drivers/net/can/usb/esd_usb2.c
--- linux-libre-3.14.25-gnu/drivers/net/can/usb/esd_usb2.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/can/usb/esd_usb2.c	2014-12-06 18:56:06.000000000 -0500
@@ -1141,6 +1141,7 @@ static void esd_usb2_disconnect(struct u
 			}
 		}
 		unlink_all_urbs(dev);
+		kfree(dev);
 	}
 }
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/ieee802154/fakehard.c linux-libre-3.14.26-gnu/drivers/net/ieee802154/fakehard.c
--- linux-libre-3.14.25-gnu/drivers/net/ieee802154/fakehard.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/ieee802154/fakehard.c	2014-12-06 18:56:06.000000000 -0500
@@ -376,17 +376,20 @@ static int ieee802154fake_probe(struct p
 
 	err = wpan_phy_register(phy);
 	if (err)
-		goto out;
+		goto err_phy_reg;
 
 	err = register_netdev(dev);
-	if (err < 0)
-		goto out;
+	if (err)
+		goto err_netdev_reg;
 
 	dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n");
 	return 0;
 
-out:
-	unregister_netdev(dev);
+err_netdev_reg:
+	wpan_phy_unregister(phy);
+err_phy_reg:
+	free_netdev(dev);
+	wpan_phy_free(phy);
 	return err;
 }
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/ppp/pptp.c linux-libre-3.14.26-gnu/drivers/net/ppp/pptp.c
--- linux-libre-3.14.25-gnu/drivers/net/ppp/pptp.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/ppp/pptp.c	2014-12-06 18:56:06.000000000 -0500
@@ -506,7 +506,9 @@ static int pptp_getname(struct socket *s
 	int len = sizeof(struct sockaddr_pppox);
 	struct sockaddr_pppox sp;
 
-	sp.sa_family	  = AF_PPPOX;
+	memset(&sp.sa_addr, 0, sizeof(sp.sa_addr));
+
+	sp.sa_family    = AF_PPPOX;
 	sp.sa_protocol  = PX_PROTO_PPTP;
 	sp.sa_addr.pptp = pppox_sk(sock->sk)->proto.pptp.src_addr;
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/usb/qmi_wwan.c linux-libre-3.14.26-gnu/drivers/net/usb/qmi_wwan.c
--- linux-libre-3.14.25-gnu/drivers/net/usb/qmi_wwan.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/usb/qmi_wwan.c	2014-12-06 18:56:06.000000000 -0500
@@ -769,6 +769,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x413c, 0x81a4, 8)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
 	{QMI_FIXED_INTF(0x413c, 0x81a8, 8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{QMI_FIXED_INTF(0x413c, 0x81a9, 8)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
+	{QMI_FIXED_INTF(0x03f0, 0x581d, 4)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/wireless/ath/ath9k/ar9003_phy.c linux-libre-3.14.26-gnu/drivers/net/wireless/ath/ath9k/ar9003_phy.c
--- linux-libre-3.14.25-gnu/drivers/net/wireless/ath/ath9k/ar9003_phy.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/wireless/ath/ath9k/ar9003_phy.c	2014-12-06 18:56:06.000000000 -0500
@@ -647,6 +647,19 @@ static void ar9003_hw_override_ini(struc
 		ah->enabled_cals |= TX_CL_CAL;
 	else
 		ah->enabled_cals &= ~TX_CL_CAL;
+
+	if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
+		if (ah->is_clk_25mhz) {
+			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
+			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
+			REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
+		} else {
+			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
+			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
+			REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
+		}
+		udelay(100);
+	}
 }
 
 static void ar9003_hw_prog_ini(struct ath_hw *ah,
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/wireless/ath/ath9k/hw.c linux-libre-3.14.26-gnu/drivers/net/wireless/ath/ath9k/hw.c
--- linux-libre-3.14.25-gnu/drivers/net/wireless/ath/ath9k/hw.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/wireless/ath/ath9k/hw.c	2014-12-06 18:56:06.000000000 -0500
@@ -858,19 +858,6 @@ static void ath9k_hw_init_pll(struct ath
 	udelay(RTC_PLL_SETTLE_DELAY);
 
 	REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
-
-	if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
-		if (ah->is_clk_25mhz) {
-			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
-			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
-			REG_WRITE(ah,  AR_SLP32_INC, 0x0001e7ae);
-		} else {
-			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
-			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
-			REG_WRITE(ah,  AR_SLP32_INC, 0x0001e800);
-		}
-		udelay(100);
-	}
 }
 
 static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/net/wireless/rt2x00/rt2x00queue.c linux-libre-3.14.26-gnu/drivers/net/wireless/rt2x00/rt2x00queue.c
--- linux-libre-3.14.25-gnu/drivers/net/wireless/rt2x00/rt2x00queue.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/net/wireless/rt2x00/rt2x00queue.c	2014-12-06 18:56:06.000000000 -0500
@@ -158,55 +158,29 @@ void rt2x00queue_align_frame(struct sk_b
 	skb_trim(skb, frame_length);
 }
 
-void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
+/*
+ * H/W needs L2 padding between the header and the paylod if header size
+ * is not 4 bytes aligned.
+ */
+void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int hdr_len)
 {
-	unsigned int payload_length = skb->len - header_length;
-	unsigned int header_align = ALIGN_SIZE(skb, 0);
-	unsigned int payload_align = ALIGN_SIZE(skb, header_length);
-	unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
-
-	/*
-	 * Adjust the header alignment if the payload needs to be moved more
-	 * than the header.
-	 */
-	if (payload_align > header_align)
-		header_align += 4;
+	unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
 
-	/* There is nothing to do if no alignment is needed */
-	if (!header_align)
+	if (!l2pad)
 		return;
 
-	/* Reserve the amount of space needed in front of the frame */
-	skb_push(skb, header_align);
-
-	/*
-	 * Move the header.
-	 */
-	memmove(skb->data, skb->data + header_align, header_length);
-
-	/* Move the payload, if present and if required */
-	if (payload_length && payload_align)
-		memmove(skb->data + header_length + l2pad,
-			skb->data + header_length + l2pad + payload_align,
-			payload_length);
-
-	/* Trim the skb to the correct size */
-	skb_trim(skb, header_length + l2pad + payload_length);
+	skb_push(skb, l2pad);
+	memmove(skb->data, skb->data + l2pad, hdr_len);
 }
 
-void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
+void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int hdr_len)
 {
-	/*
-	 * L2 padding is only present if the skb contains more than just the
-	 * IEEE 802.11 header.
-	 */
-	unsigned int l2pad = (skb->len > header_length) ?
-				L2PAD_SIZE(header_length) : 0;
+	unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
 
 	if (!l2pad)
 		return;
 
-	memmove(skb->data + l2pad, skb->data, header_length);
+	memmove(skb->data + l2pad, skb->data, hdr_len);
 	skb_pull(skb, l2pad);
 }
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/of/address.c linux-libre-3.14.26-gnu/drivers/of/address.c
--- linux-libre-3.14.25-gnu/drivers/of/address.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/of/address.c	2014-12-06 18:56:06.000000000 -0500
@@ -401,6 +401,21 @@ static struct of_bus *of_match_bus(struc
 	return NULL;
 }
 
+static int of_empty_ranges_quirk(void)
+{
+	if (IS_ENABLED(CONFIG_PPC)) {
+		/* To save cycles, we cache the result */
+		static int quirk_state = -1;
+
+		if (quirk_state < 0)
+			quirk_state =
+				of_machine_is_compatible("Power Macintosh") ||
+				of_machine_is_compatible("MacRISC");
+		return quirk_state;
+	}
+	return false;
+}
+
 static int of_translate_one(struct device_node *parent, struct of_bus *bus,
 			    struct of_bus *pbus, __be32 *addr,
 			    int na, int ns, int pna, const char *rprop)
@@ -426,12 +441,10 @@ static int of_translate_one(struct devic
 	 * This code is only enabled on powerpc. --gcl
 	 */
 	ranges = of_get_property(parent, rprop, &rlen);
-#if !defined(CONFIG_PPC)
-	if (ranges == NULL) {
+	if (ranges == NULL && !of_empty_ranges_quirk()) {
 		pr_err("OF: no ranges; cannot translate\n");
 		return 1;
 	}
-#endif /* !defined(CONFIG_PPC) */
 	if (ranges == NULL || rlen == 0) {
 		offset = of_read_number(addr, na);
 		memset(addr, 0, pna * 4);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/pci/msi.c linux-libre-3.14.26-gnu/drivers/pci/msi.c
--- linux-libre-3.14.25-gnu/drivers/pci/msi.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/pci/msi.c	2014-12-06 18:56:06.000000000 -0500
@@ -599,6 +599,20 @@ error_attrs:
 	return ret;
 }
 
+static int msi_verify_entries(struct pci_dev *dev)
+{
+	struct msi_desc *entry;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		if (!dev->no_64bit_msi || !entry->msg.address_hi)
+			continue;
+		dev_err(&dev->dev, "Device has broken 64-bit MSI but arch"
+			" tried to assign one above 4G\n");
+		return -EIO;
+	}
+	return 0;
+}
+
 /**
  * msi_capability_init - configure device's MSI capability structure
  * @dev: pointer to the pci_dev data structure of MSI device function
@@ -652,6 +666,13 @@ static int msi_capability_init(struct pc
 		return ret;
 	}
 
+	ret = msi_verify_entries(dev);
+	if (ret) {
+		msi_mask_irq(entry, mask, ~mask);
+		free_msi_irqs(dev);
+		return ret;
+	}
+
 	ret = populate_msi_sysfs(dev);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
@@ -767,6 +788,11 @@ static int msix_capability_init(struct p
 	if (ret)
 		goto out_avail;
 
+	/* Check if all MSI entries honor device restrictions */
+	ret = msi_verify_entries(dev);
+	if (ret)
+		goto out_free;
+
 	/*
 	 * Some devices require MSI-X to be enabled before we can touch the
 	 * MSI-X registers.  We need to mask all the vectors to prevent
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/pci/probe.c linux-libre-3.14.26-gnu/drivers/pci/probe.c
--- linux-libre-3.14.25-gnu/drivers/pci/probe.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/pci/probe.c	2014-12-06 18:56:06.000000000 -0500
@@ -395,15 +395,16 @@ static void pci_read_bridge_mmio_pref(st
 {
 	struct pci_dev *dev = child->self;
 	u16 mem_base_lo, mem_limit_lo;
-	unsigned long base, limit;
+	u64 base64, limit64;
+	dma_addr_t base, limit;
 	struct pci_bus_region region;
 	struct resource *res;
 
 	res = child->resource[2];
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
 	pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
-	base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
-	limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
+	base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
+	limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
 
 	if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
 		u32 mem_base_hi, mem_limit_hi;
@@ -417,18 +418,20 @@ static void pci_read_bridge_mmio_pref(st
 		 * this, just assume they are not being used.
 		 */
 		if (mem_base_hi <= mem_limit_hi) {
-#if BITS_PER_LONG == 64
-			base |= ((unsigned long) mem_base_hi) << 32;
-			limit |= ((unsigned long) mem_limit_hi) << 32;
-#else
-			if (mem_base_hi || mem_limit_hi) {
-				dev_err(&dev->dev, "can't handle 64-bit "
-					"address space for bridge\n");
-				return;
-			}
-#endif
+			base64 |= (u64) mem_base_hi << 32;
+			limit64 |= (u64) mem_limit_hi << 32;
 		}
 	}
+
+	base = (dma_addr_t) base64;
+	limit = (dma_addr_t) limit64;
+
+	if (base != base64) {
+		dev_err(&dev->dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
+			(unsigned long long) base64);
+		return;
+	}
+
 	if (base <= limit) {
 		res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
 					 IORESOURCE_MEM | IORESOURCE_PREFETCH;
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/scsi/bnx2fc/bnx2fc_fcoe.c linux-libre-3.14.26-gnu/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
--- linux-libre-3.14.25-gnu/drivers/scsi/bnx2fc/bnx2fc_fcoe.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/scsi/bnx2fc/bnx2fc_fcoe.c	2014-12-06 18:56:06.000000000 -0500
@@ -411,6 +411,7 @@ static int bnx2fc_rcv(struct sk_buff *sk
 	struct fc_frame_header *fh;
 	struct fcoe_rcv_info *fr;
 	struct fcoe_percpu_s *bg;
+	struct sk_buff *tmp_skb;
 	unsigned short oxid;
 
 	interface = container_of(ptype, struct bnx2fc_interface,
@@ -423,6 +424,12 @@ static int bnx2fc_rcv(struct sk_buff *sk
 		goto err;
 	}
 
+	tmp_skb = skb_share_check(skb, GFP_ATOMIC);
+	if (!tmp_skb)
+		goto err;
+
+	skb = tmp_skb;
+
 	if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) {
 		printk(KERN_ERR PFX "bnx2fc_rcv: Wrong FC type frame\n");
 		goto err;
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/scsi/scsi_devinfo.c linux-libre-3.14.26-gnu/drivers/scsi/scsi_devinfo.c
--- linux-libre-3.14.25-gnu/drivers/scsi/scsi_devinfo.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/scsi/scsi_devinfo.c	2014-12-06 18:56:06.000000000 -0500
@@ -202,6 +202,7 @@ static struct {
 	{"IOMEGA", "Io20S         *F", NULL, BLIST_KEY},
 	{"INSITE", "Floptical   F*8I", NULL, BLIST_KEY},
 	{"INSITE", "I325VM", NULL, BLIST_KEY},
+	{"Intel", "Multi-Flex", NULL, BLIST_NO_RSOC},
 	{"iRiver", "iFP Mass Driver", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},
 	{"LASOUND", "CDX7405", "3.10", BLIST_MAX5LUN | BLIST_SINGLELUN},
 	{"MATSHITA", "PD-1", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/spi/spi-dw.c linux-libre-3.14.26-gnu/drivers/spi/spi-dw.c
--- linux-libre-3.14.25-gnu/drivers/spi/spi-dw.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/spi/spi-dw.c	2014-12-06 18:56:06.000000000 -0500
@@ -394,9 +394,6 @@ static void pump_transfers(unsigned long
 	chip = dws->cur_chip;
 	spi = message->spi;
 
-	if (unlikely(!chip->clk_div))
-		chip->clk_div = dws->max_freq / chip->speed_hz;
-
 	if (message->state == ERROR_STATE) {
 		message->status = -EIO;
 		goto early_exit;
@@ -437,7 +434,7 @@ static void pump_transfers(unsigned long
 	if (transfer->speed_hz) {
 		speed = chip->speed_hz;
 
-		if (transfer->speed_hz != speed) {
+		if ((transfer->speed_hz != speed) || (!chip->clk_div)) {
 			speed = transfer->speed_hz;
 			if (speed > dws->max_freq) {
 				printk(KERN_ERR "MRST SPI0: unsupported"
@@ -659,7 +656,6 @@ static int dw_spi_setup(struct spi_devic
 		dev_err(&spi->dev, "No max speed HZ parameter\n");
 		return -EINVAL;
 	}
-	chip->speed_hz = spi->max_speed_hz;
 
 	chip->tmode = 0; /* Tx & Rx */
 	/* Default SPI mode is SCPOL = 0, SCPH = 0 */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/staging/rtl8188eu/os_dep/usb_intf.c linux-libre-3.14.26-gnu/drivers/staging/rtl8188eu/os_dep/usb_intf.c
--- linux-libre-3.14.25-gnu/drivers/staging/rtl8188eu/os_dep/usb_intf.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/staging/rtl8188eu/os_dep/usb_intf.c	2014-12-06 18:56:06.000000000 -0500
@@ -57,6 +57,7 @@ static struct usb_device_id rtw_usb_id_t
 	{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
 	{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
 	{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
+	{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
 	{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
 	{}	/* Terminating entry */
 };
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/target/target_core_transport.c linux-libre-3.14.26-gnu/drivers/target/target_core_transport.c
--- linux-libre-3.14.25-gnu/drivers/target/target_core_transport.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/target/target_core_transport.c	2014-12-06 18:56:06.000000000 -0500
@@ -2230,7 +2230,7 @@ transport_generic_new_cmd(struct se_cmd
 	 * and let it call back once the write buffers are ready.
 	 */
 	target_add_to_state_list(cmd);
-	if (cmd->data_direction != DMA_TO_DEVICE) {
+	if (cmd->data_direction != DMA_TO_DEVICE || cmd->data_length == 0) {
 		target_execute_cmd(cmd);
 		return 0;
 	}
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/core/quirks.c linux-libre-3.14.26-gnu/drivers/usb/core/quirks.c
--- linux-libre-3.14.25-gnu/drivers/usb/core/quirks.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/core/quirks.c	2014-12-06 18:56:06.000000000 -0500
@@ -44,6 +44,9 @@ static const struct usb_device_id usb_qu
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Microsoft Wireless Laser Mouse 6000 Receiver */
+	{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Microsoft LifeCam-VX700 v2.0 */
 	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/host/xhci.c linux-libre-3.14.26-gnu/drivers/usb/host/xhci.c
--- linux-libre-3.14.25-gnu/drivers/usb/host/xhci.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/host/xhci.c	2014-12-06 18:56:06.000000000 -0500
@@ -35,6 +35,8 @@
 #define DRIVER_AUTHOR "Sarah Sharp"
 #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
 
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
 /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
 static int link_quirk;
 module_param(link_quirk, int, S_IRUGO | S_IWUSR);
@@ -842,13 +844,47 @@ static void xhci_clear_command_ring(stru
 	xhci_set_cmd_ring_deq(xhci);
 }
 
+static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
+{
+	int port_index;
+	__le32 __iomem **port_array;
+	unsigned long flags;
+	u32 t1, t2;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* disble usb3 ports Wake bits*/
+	port_index = xhci->num_usb3_ports;
+	port_array = xhci->usb3_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	/* disble usb2 ports Wake bits*/
+	port_index = xhci->num_usb2_ports;
+	port_array = xhci->usb2_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
  * This is called when the machine transition into S3/S4 mode.
  *
  */
-int xhci_suspend(struct xhci_hcd *xhci)
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 {
 	int			rc = 0;
 	unsigned int		delay = XHCI_MAX_HALT_USEC;
@@ -859,6 +895,10 @@ int xhci_suspend(struct xhci_hcd *xhci)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
+	/* Clear root port wake on bits if wakeup not allowed. */
+	if (!do_wakeup)
+		xhci_disable_port_wake_on_bits(xhci);
+
 	/* Don't poll the roothubs on bus suspend. */
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/host/xhci.h linux-libre-3.14.26-gnu/drivers/usb/host/xhci.h
--- linux-libre-3.14.25-gnu/drivers/usb/host/xhci.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/host/xhci.h	2014-12-06 18:56:06.000000000 -0500
@@ -1760,7 +1760,7 @@ void xhci_shutdown(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
 
 #ifdef	CONFIG_PM
-int xhci_suspend(struct xhci_hcd *xhci);
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
 int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
 #else
 #define	xhci_suspend	NULL
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/host/xhci-pci.c linux-libre-3.14.26-gnu/drivers/usb/host/xhci-pci.c
--- linux-libre-3.14.25-gnu/drivers/usb/host/xhci-pci.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/host/xhci-pci.c	2014-12-06 18:56:06.000000000 -0500
@@ -281,7 +281,7 @@ static int xhci_pci_suspend(struct usb_h
 	if (xhci_compliance_mode_recovery_timer_quirk_check())
 		pdev->no_d3cold = true;
 
-	return xhci_suspend(xhci);
+	return xhci_suspend(xhci, do_wakeup);
 }
 
 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/host/xhci-plat.c linux-libre-3.14.26-gnu/drivers/usb/host/xhci-plat.c
--- linux-libre-3.14.25-gnu/drivers/usb/host/xhci-plat.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/host/xhci-plat.c	2014-12-06 18:56:06.000000000 -0500
@@ -205,7 +205,15 @@ static int xhci_plat_suspend(struct devi
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 
-	return xhci_suspend(xhci);
+	/*
+	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
+	 * to do wakeup during suspend. Since xhci_plat_suspend is currently
+	 * only designed for system suspend, device_may_wakeup() is enough
+	 * to dertermine whether host is allowed to do wakeup. Need to
+	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
+	 * also applies to runtime suspend.
+	 */
+	return xhci_suspend(xhci, device_may_wakeup(dev));
 }
 
 static int xhci_plat_resume(struct device *dev)
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/host/xhci-ring.c linux-libre-3.14.26-gnu/drivers/usb/host/xhci-ring.c
--- linux-libre-3.14.25-gnu/drivers/usb/host/xhci-ring.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/host/xhci-ring.c	2014-12-06 18:56:06.000000000 -0500
@@ -1180,9 +1180,8 @@ static void xhci_handle_cmd_reset_ep(str
 				false);
 		xhci_ring_cmd_db(xhci);
 	} else {
-		/* Clear our internal halted state and restart the ring(s) */
+		/* Clear our internal halted state */
 		xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
-		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 	}
 }
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/serial/cp210x.c linux-libre-3.14.26-gnu/drivers/usb/serial/cp210x.c
--- linux-libre-3.14.25-gnu/drivers/usb/serial/cp210x.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/serial/cp210x.c	2014-12-06 18:56:06.000000000 -0500
@@ -120,6 +120,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+	{ USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/serial/ftdi_sio.c linux-libre-3.14.26-gnu/drivers/usb/serial/ftdi_sio.c
--- linux-libre-3.14.25-gnu/drivers/usb/serial/ftdi_sio.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/serial/ftdi_sio.c	2014-12-06 18:56:06.000000000 -0500
@@ -483,6 +483,39 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/serial/ftdi_sio_ids.h linux-libre-3.14.26-gnu/drivers/usb/serial/ftdi_sio_ids.h
--- linux-libre-3.14.25-gnu/drivers/usb/serial/ftdi_sio_ids.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/serial/ftdi_sio_ids.h	2014-12-06 18:56:06.000000000 -0500
@@ -926,8 +926,8 @@
 #define BAYER_CONTOUR_CABLE_PID        0x6001
 
 /*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
+ * Matrix Orbital Intelligent USB displays.
+ * http://www.matrixorbital.com
  */
 #define MTXORB_VID			0x1B3D
 #define MTXORB_FTDI_RANGE_0100_PID	0x0100
@@ -1186,8 +1186,39 @@
 #define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
 #define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
 #define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
-
-
+#define MTXORB_FTDI_RANGE_4701_PID	0x4701
+#define MTXORB_FTDI_RANGE_9300_PID	0x9300
+#define MTXORB_FTDI_RANGE_9301_PID	0x9301
+#define MTXORB_FTDI_RANGE_9302_PID	0x9302
+#define MTXORB_FTDI_RANGE_9303_PID	0x9303
+#define MTXORB_FTDI_RANGE_9304_PID	0x9304
+#define MTXORB_FTDI_RANGE_9305_PID	0x9305
+#define MTXORB_FTDI_RANGE_9306_PID	0x9306
+#define MTXORB_FTDI_RANGE_9307_PID	0x9307
+#define MTXORB_FTDI_RANGE_9308_PID	0x9308
+#define MTXORB_FTDI_RANGE_9309_PID	0x9309
+#define MTXORB_FTDI_RANGE_930A_PID	0x930A
+#define MTXORB_FTDI_RANGE_930B_PID	0x930B
+#define MTXORB_FTDI_RANGE_930C_PID	0x930C
+#define MTXORB_FTDI_RANGE_930D_PID	0x930D
+#define MTXORB_FTDI_RANGE_930E_PID	0x930E
+#define MTXORB_FTDI_RANGE_930F_PID	0x930F
+#define MTXORB_FTDI_RANGE_9310_PID	0x9310
+#define MTXORB_FTDI_RANGE_9311_PID	0x9311
+#define MTXORB_FTDI_RANGE_9312_PID	0x9312
+#define MTXORB_FTDI_RANGE_9313_PID	0x9313
+#define MTXORB_FTDI_RANGE_9314_PID	0x9314
+#define MTXORB_FTDI_RANGE_9315_PID	0x9315
+#define MTXORB_FTDI_RANGE_9316_PID	0x9316
+#define MTXORB_FTDI_RANGE_9317_PID	0x9317
+#define MTXORB_FTDI_RANGE_9318_PID	0x9318
+#define MTXORB_FTDI_RANGE_9319_PID	0x9319
+#define MTXORB_FTDI_RANGE_931A_PID	0x931A
+#define MTXORB_FTDI_RANGE_931B_PID	0x931B
+#define MTXORB_FTDI_RANGE_931C_PID	0x931C
+#define MTXORB_FTDI_RANGE_931D_PID	0x931D
+#define MTXORB_FTDI_RANGE_931E_PID	0x931E
+#define MTXORB_FTDI_RANGE_931F_PID	0x931F
 
 /*
  * The Mobility Lab (TML)
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/serial/keyspan.c linux-libre-3.14.26-gnu/drivers/usb/serial/keyspan.c
--- linux-libre-3.14.25-gnu/drivers/usb/serial/keyspan.c	2014-11-21 22:00:51.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/serial/keyspan.c	2014-12-07 06:24:43.000000000 -0500
@@ -311,24 +311,30 @@ static void	usa26_indat_callback(struct
 		if ((data[0] & 0x80) == 0) {
 			/* no errors on individual bytes, only
 			   possible overrun err */
-			if (data[0] & RXERROR_OVERRUN)
-				err = TTY_OVERRUN;
-			else
-				err = 0;
+			if (data[0] & RXERROR_OVERRUN) {
+				tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+			}
 			for (i = 1; i < urb->actual_length ; ++i)
-				tty_insert_flip_char(&port->port, data[i], err);
+				tty_insert_flip_char(&port->port, data[i],
+								TTY_NORMAL);
 		} else {
 			/* some bytes had errors, every byte has status */
 			dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
 			for (i = 0; i + 1 < urb->actual_length; i += 2) {
-				int stat = data[i], flag = 0;
-				if (stat & RXERROR_OVERRUN)
-					flag |= TTY_OVERRUN;
-				if (stat & RXERROR_FRAMING)
-					flag |= TTY_FRAME;
-				if (stat & RXERROR_PARITY)
-					flag |= TTY_PARITY;
+				int stat = data[i];
+				int flag = TTY_NORMAL;
+
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
 				tty_insert_flip_char(&port->port, data[i+1],
 						flag);
 			}
@@ -666,14 +672,19 @@ static void	usa49_indat_callback(struct
 		} else {
 			/* some bytes had errors, every byte has status */
 			for (i = 0; i + 1 < urb->actual_length; i += 2) {
-				int stat = data[i], flag = 0;
-				if (stat & RXERROR_OVERRUN)
-					flag |= TTY_OVERRUN;
-				if (stat & RXERROR_FRAMING)
-					flag |= TTY_FRAME;
-				if (stat & RXERROR_PARITY)
-					flag |= TTY_PARITY;
+				int stat = data[i];
+				int flag = TTY_NORMAL;
+
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
 				tty_insert_flip_char(&port->port, data[i+1],
 						flag);
 			}
@@ -730,15 +741,19 @@ static void usa49wg_indat_callback(struc
 			 */
 			for (x = 0; x + 1 < len &&
 				    i + 1 < urb->actual_length; x += 2) {
-				int stat = data[i], flag = 0;
+				int stat = data[i];
+				int flag = TTY_NORMAL;
 
-				if (stat & RXERROR_OVERRUN)
-					flag |= TTY_OVERRUN;
-				if (stat & RXERROR_FRAMING)
-					flag |= TTY_FRAME;
-				if (stat & RXERROR_PARITY)
-					flag |= TTY_PARITY;
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
 				tty_insert_flip_char(&port->port, data[i+1],
 						     flag);
 				i += 2;
@@ -790,25 +805,31 @@ static void usa90_indat_callback(struct
 			if ((data[0] & 0x80) == 0) {
 				/* no errors on individual bytes, only
 				   possible overrun err*/
-				if (data[0] & RXERROR_OVERRUN)
-					err = TTY_OVERRUN;
-				else
-					err = 0;
+				if (data[0] & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				for (i = 1; i < urb->actual_length ; ++i)
 					tty_insert_flip_char(&port->port,
-							data[i], err);
+							data[i], TTY_NORMAL);
 			}  else {
 			/* some bytes had errors, every byte has status */
 				dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
 				for (i = 0; i + 1 < urb->actual_length; i += 2) {
-					int stat = data[i], flag = 0;
-					if (stat & RXERROR_OVERRUN)
-						flag |= TTY_OVERRUN;
-					if (stat & RXERROR_FRAMING)
-						flag |= TTY_FRAME;
-					if (stat & RXERROR_PARITY)
-						flag |= TTY_PARITY;
+					int stat = data[i];
+					int flag = TTY_NORMAL;
+
+					if (stat & RXERROR_OVERRUN) {
+						tty_insert_flip_char(
+								&port->port, 0,
+								TTY_OVERRUN);
+					}
 					/* XXX should handle break (0x10) */
+					if (stat & RXERROR_PARITY)
+						flag = TTY_PARITY;
+					else if (stat & RXERROR_FRAMING)
+						flag = TTY_FRAME;
+
 					tty_insert_flip_char(&port->port,
 							data[i+1], flag);
 				}
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/usb/serial/ssu100.c linux-libre-3.14.26-gnu/drivers/usb/serial/ssu100.c
--- linux-libre-3.14.25-gnu/drivers/usb/serial/ssu100.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/usb/serial/ssu100.c	2014-12-06 18:56:06.000000000 -0500
@@ -490,10 +490,9 @@ static void ssu100_update_lsr(struct usb
 			if (*tty_flag == TTY_NORMAL)
 				*tty_flag = TTY_FRAME;
 		}
-		if (lsr & UART_LSR_OE){
+		if (lsr & UART_LSR_OE) {
 			port->icount.overrun++;
-			if (*tty_flag == TTY_NORMAL)
-				*tty_flag = TTY_OVERRUN;
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 		}
 	}
 
@@ -511,12 +510,8 @@ static void ssu100_process_read_urb(stru
 	if ((len >= 4) &&
 	    (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
 	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
-		if (packet[2] == 0x00) {
+		if (packet[2] == 0x00)
 			ssu100_update_lsr(port, packet[3], &flag);
-			if (flag == TTY_OVERRUN)
-				tty_insert_flip_char(&port->port, 0,
-						TTY_OVERRUN);
-		}
 		if (packet[2] == 0x01)
 			ssu100_update_msr(port, packet[3]);
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/drivers/vhost/scsi.c linux-libre-3.14.26-gnu/drivers/vhost/scsi.c
--- linux-libre-3.14.25-gnu/drivers/vhost/scsi.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/drivers/vhost/scsi.c	2014-12-06 18:56:06.000000000 -0500
@@ -1200,6 +1200,7 @@ static int
 vhost_scsi_set_endpoint(struct vhost_scsi *vs,
 			struct vhost_scsi_target *t)
 {
+	struct se_portal_group *se_tpg;
 	struct tcm_vhost_tport *tv_tport;
 	struct tcm_vhost_tpg *tpg;
 	struct tcm_vhost_tpg **vs_tpg;
@@ -1247,6 +1248,21 @@ vhost_scsi_set_endpoint(struct vhost_scs
 				ret = -EEXIST;
 				goto out;
 			}
+			/*
+			 * In order to ensure individual vhost-scsi configfs
+			 * groups cannot be removed while in use by vhost ioctl,
+			 * go ahead and take an explicit se_tpg->tpg_group.cg_item
+			 * dependency now.
+			 */
+			se_tpg = &tpg->se_tpg;
+			ret = configfs_depend_item(se_tpg->se_tpg_tfo->tf_subsys,
+						   &se_tpg->tpg_group.cg_item);
+			if (ret) {
+				pr_warn("configfs_depend_item() failed: %d\n", ret);
+				kfree(vs_tpg);
+				mutex_unlock(&tpg->tv_tpg_mutex);
+				goto out;
+			}
 			tpg->tv_tpg_vhost_count++;
 			tpg->vhost_scsi = vs;
 			vs_tpg[tpg->tport_tpgt] = tpg;
@@ -1289,6 +1305,7 @@ static int
 vhost_scsi_clear_endpoint(struct vhost_scsi *vs,
 			  struct vhost_scsi_target *t)
 {
+	struct se_portal_group *se_tpg;
 	struct tcm_vhost_tport *tv_tport;
 	struct tcm_vhost_tpg *tpg;
 	struct vhost_virtqueue *vq;
@@ -1337,6 +1354,13 @@ vhost_scsi_clear_endpoint(struct vhost_s
 		vs->vs_tpg[target] = NULL;
 		match = true;
 		mutex_unlock(&tpg->tv_tpg_mutex);
+		/*
+		 * Release se_tpg->tpg_group.cg_item configfs dependency now
+		 * to allow vhost-scsi WWPN se_tpg->tpg_group shutdown to occur.
+		 */
+		se_tpg = &tpg->se_tpg;
+		configfs_undepend_item(se_tpg->se_tpg_tfo->tf_subsys,
+				       &se_tpg->tpg_group.cg_item);
 	}
 	if (match) {
 		for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) {
diff -druNp --no-dereference linux-libre-3.14.25-gnu/fs/aio.c linux-libre-3.14.26-gnu/fs/aio.c
--- linux-libre-3.14.25-gnu/fs/aio.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/fs/aio.c	2014-12-06 18:56:06.000000000 -0500
@@ -165,6 +165,15 @@ static struct vfsmount *aio_mnt;
 static const struct file_operations aio_ring_fops;
 static const struct address_space_operations aio_ctx_aops;
 
+/* Backing dev info for aio fs.
+ * -no dirty page accounting or writeback happens
+ */
+static struct backing_dev_info aio_fs_backing_dev_info = {
+	.name           = "aiofs",
+	.state          = 0,
+	.capabilities   = BDI_CAP_NO_ACCT_AND_WRITEBACK | BDI_CAP_MAP_COPY,
+};
+
 static struct file *aio_private_file(struct kioctx *ctx, loff_t nr_pages)
 {
 	struct qstr this = QSTR_INIT("[aio]", 5);
@@ -176,6 +185,7 @@ static struct file *aio_private_file(str
 
 	inode->i_mapping->a_ops = &aio_ctx_aops;
 	inode->i_mapping->private_data = ctx;
+	inode->i_mapping->backing_dev_info = &aio_fs_backing_dev_info;
 	inode->i_size = PAGE_SIZE * nr_pages;
 
 	path.dentry = d_alloc_pseudo(aio_mnt->mnt_sb, &this);
@@ -221,6 +231,9 @@ static int __init aio_setup(void)
 	if (IS_ERR(aio_mnt))
 		panic("Failed to create aio fs mount.");
 
+	if (bdi_init(&aio_fs_backing_dev_info))
+		panic("Failed to init aio fs backing dev info.");
+
 	kiocb_cachep = KMEM_CACHE(kiocb, SLAB_HWCACHE_ALIGN|SLAB_PANIC);
 	kioctx_cachep = KMEM_CACHE(kioctx,SLAB_HWCACHE_ALIGN|SLAB_PANIC);
 
@@ -282,11 +295,6 @@ static const struct file_operations aio_
 	.mmap = aio_ring_mmap,
 };
 
-static int aio_set_page_dirty(struct page *page)
-{
-	return 0;
-}
-
 #if IS_ENABLED(CONFIG_MIGRATION)
 static int aio_migratepage(struct address_space *mapping, struct page *new,
 			struct page *old, enum migrate_mode mode)
@@ -358,7 +366,7 @@ out:
 #endif
 
 static const struct address_space_operations aio_ctx_aops = {
-	.set_page_dirty = aio_set_page_dirty,
+	.set_page_dirty = __set_page_dirty_no_writeback,
 #if IS_ENABLED(CONFIG_MIGRATION)
 	.migratepage	= aio_migratepage,
 #endif
@@ -413,7 +421,6 @@ static int aio_setup_ring(struct kioctx
 		pr_debug("pid(%d) page[%d]->count=%d\n",
 			 current->pid, i, page_count(page));
 		SetPageUptodate(page);
-		SetPageDirty(page);
 		unlock_page(page);
 
 		ctx->ring_pages[i] = page;
diff -druNp --no-dereference linux-libre-3.14.25-gnu/fs/locks.c linux-libre-3.14.26-gnu/fs/locks.c
--- linux-libre-3.14.25-gnu/fs/locks.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/fs/locks.c	2014-12-06 18:56:06.000000000 -0500
@@ -2235,16 +2235,28 @@ void locks_remove_flock(struct file *fil
 
 	while ((fl = *before) != NULL) {
 		if (fl->fl_file == filp) {
-			if (IS_FLOCK(fl)) {
-				locks_delete_lock(before);
-				continue;
-			}
 			if (IS_LEASE(fl)) {
 				lease_modify(before, F_UNLCK);
 				continue;
 			}
-			/* What? */
-			BUG();
+
+			/*
+			 * There's a leftover lock on the list of a type that
+			 * we didn't expect to see. Most likely a classic
+			 * POSIX lock that ended up not getting released
+			 * properly, or that raced onto the list somehow. Log
+			 * some info about it and then just remove it from
+			 * the list.
+			 */
+			WARN(!IS_FLOCK(fl),
+				"leftover lock: dev=%u:%u ino=%lu type=%hhd flags=0x%x start=%lld end=%lld\n",
+				MAJOR(inode->i_sb->s_dev),
+				MINOR(inode->i_sb->s_dev), inode->i_ino,
+				fl->fl_type, fl->fl_flags,
+				fl->fl_start, fl->fl_end);
+
+			locks_delete_lock(before);
+			continue;
  		}
 		before = &fl->fl_next;
 	}
diff -druNp --no-dereference linux-libre-3.14.25-gnu/fs/nfs/pagelist.c linux-libre-3.14.26-gnu/fs/nfs/pagelist.c
--- linux-libre-3.14.25-gnu/fs/nfs/pagelist.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/fs/nfs/pagelist.c	2014-12-06 18:56:06.000000000 -0500
@@ -113,7 +113,7 @@ __nfs_iocounter_wait(struct nfs_io_count
 		if (atomic_read(&c->io_count) == 0)
 			break;
 		ret = nfs_wait_bit_killable(&c->flags);
-	} while (atomic_read(&c->io_count) != 0);
+	} while (atomic_read(&c->io_count) != 0 && !ret);
 	finish_wait(wq, &q.wait);
 	return ret;
 }
diff -druNp --no-dereference linux-libre-3.14.25-gnu/fs/nfsd/nfs4callback.c linux-libre-3.14.26-gnu/fs/nfsd/nfs4callback.c
--- linux-libre-3.14.25-gnu/fs/nfsd/nfs4callback.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/fs/nfsd/nfs4callback.c	2014-12-06 18:56:06.000000000 -0500
@@ -784,8 +784,12 @@ static bool nfsd41_cb_get_slot(struct nf
 {
 	if (test_and_set_bit(0, &clp->cl_cb_slot_busy) != 0) {
 		rpc_sleep_on(&clp->cl_cb_waitq, task, NULL);
-		dprintk("%s slot is busy\n", __func__);
-		return false;
+		/* Race breaker */
+		if (test_and_set_bit(0, &clp->cl_cb_slot_busy) != 0) {
+			dprintk("%s slot is busy\n", __func__);
+			return false;
+		}
+		rpc_wake_up_queued_task(&clp->cl_cb_waitq, task);
 	}
 	return true;
 }
diff -druNp --no-dereference linux-libre-3.14.25-gnu/fs/nfsd/nfscache.c linux-libre-3.14.26-gnu/fs/nfsd/nfscache.c
--- linux-libre-3.14.25-gnu/fs/nfsd/nfscache.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/fs/nfsd/nfscache.c	2014-12-06 18:56:06.000000000 -0500
@@ -224,13 +224,6 @@ hash_refile(struct svc_cacherep *rp)
 	hlist_add_head(&rp->c_hash, cache_hash + hash_32(rp->c_xid, maskbits));
 }
 
-static inline bool
-nfsd_cache_entry_expired(struct svc_cacherep *rp)
-{
-	return rp->c_state != RC_INPROG &&
-	       time_after(jiffies, rp->c_timestamp + RC_EXPIRE);
-}
-
 /*
  * Walk the LRU list and prune off entries that are older than RC_EXPIRE.
  * Also prune the oldest ones when the total exceeds the max number of entries.
@@ -242,8 +235,14 @@ prune_cache_entries(void)
 	long freed = 0;
 
 	list_for_each_entry_safe(rp, tmp, &lru_head, c_lru) {
-		if (!nfsd_cache_entry_expired(rp) &&
-		    num_drc_entries <= max_drc_entries)
+		/*
+		 * Don't free entries attached to calls that are still
+		 * in-progress, but do keep scanning the list.
+		 */
+		if (rp->c_state == RC_INPROG)
+			continue;
+		if (num_drc_entries <= max_drc_entries &&
+		    time_before(jiffies, rp->c_timestamp + RC_EXPIRE))
 			break;
 		nfsd_reply_cache_free_locked(rp);
 		freed++;
diff -druNp --no-dereference linux-libre-3.14.25-gnu/fs/nfsd/nfsd.h linux-libre-3.14.26-gnu/fs/nfsd/nfsd.h
--- linux-libre-3.14.25-gnu/fs/nfsd/nfsd.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/fs/nfsd/nfsd.h	2014-12-06 18:56:06.000000000 -0500
@@ -328,12 +328,15 @@ void		nfsd_lockd_shutdown(void);
 	(NFSD4_SUPPORTED_ATTRS_WORD2 | FATTR4_WORD2_SUPPATTR_EXCLCREAT)
 
 #ifdef CONFIG_NFSD_V4_SECURITY_LABEL
-#define NFSD4_2_SUPPORTED_ATTRS_WORD2 \
-	(NFSD4_1_SUPPORTED_ATTRS_WORD2 | FATTR4_WORD2_SECURITY_LABEL)
+#define NFSD4_2_SECURITY_ATTRS		FATTR4_WORD2_SECURITY_LABEL
 #else
-#define NFSD4_2_SUPPORTED_ATTRS_WORD2 0
+#define NFSD4_2_SECURITY_ATTRS		0
 #endif
 
+#define NFSD4_2_SUPPORTED_ATTRS_WORD2 \
+	(NFSD4_1_SUPPORTED_ATTRS_WORD2 | \
+	NFSD4_2_SECURITY_ATTRS)
+
 static inline u32 nfsd_suppattrs0(u32 minorversion)
 {
 	return minorversion ? NFSD4_1_SUPPORTED_ATTRS_WORD0
diff -druNp --no-dereference linux-libre-3.14.25-gnu/include/linux/bitops.h linux-libre-3.14.26-gnu/include/linux/bitops.h
--- linux-libre-3.14.25-gnu/include/linux/bitops.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/include/linux/bitops.h	2014-12-06 18:56:06.000000000 -0500
@@ -18,8 +18,11 @@
  * position @h. For example
  * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
  */
-#define GENMASK(h, l)		(((U32_C(1) << ((h) - (l) + 1)) - 1) << (l))
-#define GENMASK_ULL(h, l)	(((U64_C(1) << ((h) - (l) + 1)) - 1) << (l))
+#define GENMASK(h, l) \
+	(((~0UL) << (l)) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
+
+#define GENMASK_ULL(h, l) \
+	(((~0ULL) << (l)) & (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
 
 extern unsigned int __sw_hweight8(unsigned int w);
 extern unsigned int __sw_hweight16(unsigned int w);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/include/linux/iio/events.h linux-libre-3.14.26-gnu/include/linux/iio/events.h
--- linux-libre-3.14.25-gnu/include/linux/iio/events.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/include/linux/iio/events.h	2014-12-06 18:56:06.000000000 -0500
@@ -72,7 +72,7 @@ struct iio_event_data {
 
 #define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF)
 
-#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0xCF)
+#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0x7F)
 
 #define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF)
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/include/linux/inetdevice.h linux-libre-3.14.26-gnu/include/linux/inetdevice.h
--- linux-libre-3.14.25-gnu/include/linux/inetdevice.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/include/linux/inetdevice.h	2014-12-06 18:56:06.000000000 -0500
@@ -242,7 +242,7 @@ static inline void in_dev_put(struct in_
 static __inline__ __be32 inet_make_mask(int logmask)
 {
 	if (logmask)
-		return htonl(~((1<<(32-logmask))-1));
+		return htonl(~((1U<<(32-logmask))-1));
 	return 0;
 }
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/include/linux/pci.h linux-libre-3.14.26-gnu/include/linux/pci.h
--- linux-libre-3.14.25-gnu/include/linux/pci.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/include/linux/pci.h	2014-12-06 18:56:06.000000000 -0500
@@ -324,6 +324,7 @@ struct pci_dev {
 	unsigned int	is_added:1;
 	unsigned int	is_busmaster:1; /* device is busmaster */
 	unsigned int	no_msi:1;	/* device may not use msi */
+	unsigned int	no_64bit_msi:1; /* device may only use 32-bit MSIs */
 	unsigned int	block_cfg_access:1;	/* config space access is blocked */
 	unsigned int	broken_parity_status:1;	/* Device generates false positive parity */
 	unsigned int	irq_reroute_variant:2;	/* device needs IRQ rerouting variant */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/include/sound/soc-dpcm.h linux-libre-3.14.26-gnu/include/sound/soc-dpcm.h
--- linux-libre-3.14.25-gnu/include/sound/soc-dpcm.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/include/sound/soc-dpcm.h	2014-12-06 18:56:06.000000000 -0500
@@ -102,6 +102,8 @@ struct snd_soc_dpcm_runtime {
 	/* state and update */
 	enum snd_soc_dpcm_update runtime_update;
 	enum snd_soc_dpcm_state state;
+
+	int trigger_pending; /* trigger cmd + 1 if pending, 0 if not */
 };
 
 /* can this BE stop and free */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/kernel/events/uprobes.c linux-libre-3.14.26-gnu/kernel/events/uprobes.c
--- linux-libre-3.14.25-gnu/kernel/events/uprobes.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/kernel/events/uprobes.c	2014-12-06 18:56:06.000000000 -0500
@@ -1621,7 +1621,6 @@ bool uprobe_deny_signal(void)
 		if (__fatal_signal_pending(t) || arch_uprobe_xol_was_trapped(t)) {
 			utask->state = UTASK_SSTEP_TRAPPED;
 			set_tsk_thread_flag(t, TIF_UPROBE);
-			set_tsk_thread_flag(t, TIF_NOTIFY_RESUME);
 		}
 	}
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/Makefile linux-libre-3.14.26-gnu/Makefile
--- linux-libre-3.14.25-gnu/Makefile	2014-11-21 21:47:01.000000000 -0500
+++ linux-libre-3.14.26-gnu/Makefile	2014-12-07 06:10:28.000000000 -0500
@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 14
-SUBLEVEL = 25
+SUBLEVEL = 26
 EXTRAVERSION =-gnu
 NAME = Remembering Coco
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/net/batman-adv/hard-interface.c linux-libre-3.14.26-gnu/net/batman-adv/hard-interface.c
--- linux-libre-3.14.25-gnu/net/batman-adv/hard-interface.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/net/batman-adv/hard-interface.c	2014-12-06 18:56:06.000000000 -0500
@@ -83,7 +83,7 @@ static bool batadv_is_on_batman_iface(co
 		return true;
 
 	/* no more parents..stop recursion */
-	if (net_dev->iflink == net_dev->ifindex)
+	if (net_dev->iflink == 0 || net_dev->iflink == net_dev->ifindex)
 		return false;
 
 	/* recurse over the parent device */
diff -druNp --no-dereference linux-libre-3.14.25-gnu/net/ipv4/fib_rules.c linux-libre-3.14.26-gnu/net/ipv4/fib_rules.c
--- linux-libre-3.14.25-gnu/net/ipv4/fib_rules.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/net/ipv4/fib_rules.c	2014-12-06 18:56:06.000000000 -0500
@@ -62,6 +62,10 @@ int __fib_lookup(struct net *net, struct
 	else
 		res->tclassid = 0;
 #endif
+
+	if (err == -ESRCH)
+		err = -ENETUNREACH;
+
 	return err;
 }
 EXPORT_SYMBOL_GPL(__fib_lookup);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/net/ipv4/ping.c linux-libre-3.14.26-gnu/net/ipv4/ping.c
--- linux-libre-3.14.25-gnu/net/ipv4/ping.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/net/ipv4/ping.c	2014-12-06 18:56:06.000000000 -0500
@@ -217,6 +217,8 @@ static struct sock *ping_lookup(struct n
 					     &ipv6_hdr(skb)->daddr))
 				continue;
 #endif
+		} else {
+			continue;
 		}
 
 		if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)
diff -druNp --no-dereference linux-libre-3.14.25-gnu/net/ipx/af_ipx.c linux-libre-3.14.26-gnu/net/ipx/af_ipx.c
--- linux-libre-3.14.25-gnu/net/ipx/af_ipx.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/net/ipx/af_ipx.c	2014-12-06 18:56:06.000000000 -0500
@@ -1763,6 +1763,7 @@ static int ipx_recvmsg(struct kiocb *ioc
 	struct ipxhdr *ipx = NULL;
 	struct sk_buff *skb;
 	int copied, rc;
+	bool locked = true;
 
 	lock_sock(sk);
 	/* put the autobinding in */
@@ -1789,6 +1790,8 @@ static int ipx_recvmsg(struct kiocb *ioc
 	if (sock_flag(sk, SOCK_ZAPPED))
 		goto out;
 
+	release_sock(sk);
+	locked = false;
 	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
 				flags & MSG_DONTWAIT, &rc);
 	if (!skb)
@@ -1822,7 +1825,8 @@ static int ipx_recvmsg(struct kiocb *ioc
 out_free:
 	skb_free_datagram(sk, skb);
 out:
-	release_sock(sk);
+	if (locked)
+		release_sock(sk);
 	return rc;
 }
 
diff -druNp --no-dereference linux-libre-3.14.25-gnu/sound/soc/codecs/sgtl5000.c linux-libre-3.14.26-gnu/sound/soc/codecs/sgtl5000.c
--- linux-libre-3.14.25-gnu/sound/soc/codecs/sgtl5000.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/sound/soc/codecs/sgtl5000.c	2014-12-06 18:56:06.000000000 -0500
@@ -1369,8 +1369,7 @@ static int sgtl5000_probe(struct snd_soc
 
 	/* enable small pop, introduce 400ms delay in turning off */
 	snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
-				SGTL5000_SMALL_POP,
-				SGTL5000_SMALL_POP);
+				SGTL5000_SMALL_POP, 1);
 
 	/* disable short cut detector */
 	snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
diff -druNp --no-dereference linux-libre-3.14.25-gnu/sound/soc/codecs/sgtl5000.h linux-libre-3.14.26-gnu/sound/soc/codecs/sgtl5000.h
--- linux-libre-3.14.25-gnu/sound/soc/codecs/sgtl5000.h	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/sound/soc/codecs/sgtl5000.h	2014-12-06 18:56:06.000000000 -0500
@@ -275,7 +275,7 @@
 #define SGTL5000_BIAS_CTRL_MASK			0x000e
 #define SGTL5000_BIAS_CTRL_SHIFT		1
 #define SGTL5000_BIAS_CTRL_WIDTH		3
-#define SGTL5000_SMALL_POP			0x0001
+#define SGTL5000_SMALL_POP			0
 
 /*
  * SGTL5000_CHIP_MIC_CTRL
diff -druNp --no-dereference linux-libre-3.14.25-gnu/sound/soc/codecs/wm_adsp.c linux-libre-3.14.26-gnu/sound/soc/codecs/wm_adsp.c
--- linux-libre-3.14.25-gnu/sound/soc/codecs/wm_adsp.c	2014-11-21 22:03:06.000000000 -0500
+++ linux-libre-3.14.26-gnu/sound/soc/codecs/wm_adsp.c	2014-12-07 06:27:01.000000000 -0500
@@ -1341,6 +1341,7 @@ static int wm_adsp_load_coeff(struct wm_
 			  file, blocks, pos - firmware->size);
 
 out_fw:
+	regmap_async_complete(regmap);
 	release_firmware(firmware);
 	wm_adsp_buf_free(&buf_list);
 out:
diff -druNp --no-dereference linux-libre-3.14.25-gnu/sound/soc/sh/fsi.c linux-libre-3.14.26-gnu/sound/soc/sh/fsi.c
--- linux-libre-3.14.25-gnu/sound/soc/sh/fsi.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/sound/soc/sh/fsi.c	2014-12-06 18:56:06.000000000 -0500
@@ -1785,8 +1785,7 @@ static const struct snd_soc_dai_ops fsi_
 static struct snd_pcm_hardware fsi_pcm_hardware = {
 	.info =		SNDRV_PCM_INFO_INTERLEAVED	|
 			SNDRV_PCM_INFO_MMAP		|
-			SNDRV_PCM_INFO_MMAP_VALID	|
-			SNDRV_PCM_INFO_PAUSE,
+			SNDRV_PCM_INFO_MMAP_VALID,
 	.buffer_bytes_max	= 64 * 1024,
 	.period_bytes_min	= 32,
 	.period_bytes_max	= 8192,
diff -druNp --no-dereference linux-libre-3.14.25-gnu/sound/soc/sh/rcar/core.c linux-libre-3.14.26-gnu/sound/soc/sh/rcar/core.c
--- linux-libre-3.14.25-gnu/sound/soc/sh/rcar/core.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/sound/soc/sh/rcar/core.c	2014-12-06 18:56:06.000000000 -0500
@@ -626,8 +626,7 @@ static void rsnd_dai_remove(struct platf
 static struct snd_pcm_hardware rsnd_pcm_hardware = {
 	.info =		SNDRV_PCM_INFO_INTERLEAVED	|
 			SNDRV_PCM_INFO_MMAP		|
-			SNDRV_PCM_INFO_MMAP_VALID	|
-			SNDRV_PCM_INFO_PAUSE,
+			SNDRV_PCM_INFO_MMAP_VALID,
 	.buffer_bytes_max	= 64 * 1024,
 	.period_bytes_min	= 32,
 	.period_bytes_max	= 8192,
diff -druNp --no-dereference linux-libre-3.14.25-gnu/sound/soc/soc-pcm.c linux-libre-3.14.26-gnu/sound/soc/soc-pcm.c
--- linux-libre-3.14.25-gnu/sound/soc/soc-pcm.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/sound/soc/soc-pcm.c	2014-12-06 18:56:06.000000000 -0500
@@ -1258,13 +1258,36 @@ static void dpcm_set_fe_runtime(struct s
 		dpcm_init_runtime_hw(runtime, &cpu_dai_drv->capture);
 }
 
+static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd);
+
+/* Set FE's runtime_update state; the state is protected via PCM stream lock
+ * for avoiding the race with trigger callback.
+ * If the state is unset and a trigger is pending while the previous operation,
+ * process the pending trigger action here.
+ */
+static void dpcm_set_fe_update_state(struct snd_soc_pcm_runtime *fe,
+				     int stream, enum snd_soc_dpcm_update state)
+{
+	struct snd_pcm_substream *substream =
+		snd_soc_dpcm_get_substream(fe, stream);
+
+	snd_pcm_stream_lock_irq(substream);
+	if (state == SND_SOC_DPCM_UPDATE_NO && fe->dpcm[stream].trigger_pending) {
+		dpcm_fe_dai_do_trigger(substream,
+				       fe->dpcm[stream].trigger_pending - 1);
+		fe->dpcm[stream].trigger_pending = 0;
+	}
+	fe->dpcm[stream].runtime_update = state;
+	snd_pcm_stream_unlock_irq(substream);
+}
+
 static int dpcm_fe_dai_startup(struct snd_pcm_substream *fe_substream)
 {
 	struct snd_soc_pcm_runtime *fe = fe_substream->private_data;
 	struct snd_pcm_runtime *runtime = fe_substream->runtime;
 	int stream = fe_substream->stream, ret = 0;
 
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
 	ret = dpcm_be_dai_startup(fe, fe_substream->stream);
 	if (ret < 0) {
@@ -1286,13 +1309,13 @@ static int dpcm_fe_dai_startup(struct sn
 	dpcm_set_fe_runtime(fe_substream);
 	snd_pcm_limit_hw_rates(runtime);
 
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 	return 0;
 
 unwind:
 	dpcm_be_dai_startup_unwind(fe, fe_substream->stream);
 be_err:
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 	return ret;
 }
 
@@ -1339,7 +1362,7 @@ static int dpcm_fe_dai_shutdown(struct s
 	struct snd_soc_pcm_runtime *fe = substream->private_data;
 	int stream = substream->stream;
 
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
 	/* shutdown the BEs */
 	dpcm_be_dai_shutdown(fe, substream->stream);
@@ -1353,7 +1376,7 @@ static int dpcm_fe_dai_shutdown(struct s
 	dpcm_dapm_stream_event(fe, stream, SND_SOC_DAPM_STREAM_STOP);
 
 	fe->dpcm[stream].state = SND_SOC_DPCM_STATE_CLOSE;
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 	return 0;
 }
 
@@ -1401,7 +1424,7 @@ static int dpcm_fe_dai_hw_free(struct sn
 	int err, stream = substream->stream;
 
 	mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
 	dev_dbg(fe->dev, "ASoC: hw_free FE %s\n", fe->dai_link->name);
 
@@ -1416,7 +1439,7 @@ static int dpcm_fe_dai_hw_free(struct sn
 	err = dpcm_be_dai_hw_free(fe, stream);
 
 	fe->dpcm[stream].state = SND_SOC_DPCM_STATE_HW_FREE;
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 
 	mutex_unlock(&fe->card->mutex);
 	return 0;
@@ -1509,7 +1532,7 @@ static int dpcm_fe_dai_hw_params(struct
 	int ret, stream = substream->stream;
 
 	mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
 	memcpy(&fe->dpcm[substream->stream].hw_params, params,
 			sizeof(struct snd_pcm_hw_params));
@@ -1532,7 +1555,7 @@ static int dpcm_fe_dai_hw_params(struct
 		fe->dpcm[stream].state = SND_SOC_DPCM_STATE_HW_PARAMS;
 
 out:
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 	mutex_unlock(&fe->card->mutex);
 	return ret;
 }
@@ -1646,7 +1669,7 @@ int dpcm_be_dai_trigger(struct snd_soc_p
 }
 EXPORT_SYMBOL_GPL(dpcm_be_dai_trigger);
 
-static int dpcm_fe_dai_trigger(struct snd_pcm_substream *substream, int cmd)
+static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
 {
 	struct snd_soc_pcm_runtime *fe = substream->private_data;
 	int stream = substream->stream, ret;
@@ -1720,6 +1743,23 @@ out:
 	return ret;
 }
 
+static int dpcm_fe_dai_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *fe = substream->private_data;
+	int stream = substream->stream;
+
+	/* if FE's runtime_update is already set, we're in race;
+	 * process this trigger later at exit
+	 */
+	if (fe->dpcm[stream].runtime_update != SND_SOC_DPCM_UPDATE_NO) {
+		fe->dpcm[stream].trigger_pending = cmd + 1;
+		return 0; /* delayed, assuming it's successful */
+	}
+
+	/* we're alone, let's trigger */
+	return dpcm_fe_dai_do_trigger(substream, cmd);
+}
+
 int dpcm_be_dai_prepare(struct snd_soc_pcm_runtime *fe, int stream)
 {
 	struct snd_soc_dpcm *dpcm;
@@ -1763,7 +1803,7 @@ static int dpcm_fe_dai_prepare(struct sn
 
 	dev_dbg(fe->dev, "ASoC: prepare FE %s\n", fe->dai_link->name);
 
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
 
 	/* there is no point preparing this FE if there are no BEs */
 	if (list_empty(&fe->dpcm[stream].be_clients)) {
@@ -1790,7 +1830,7 @@ static int dpcm_fe_dai_prepare(struct sn
 	fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PREPARE;
 
 out:
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 	mutex_unlock(&fe->card->mutex);
 
 	return ret;
@@ -1937,11 +1977,11 @@ static int dpcm_run_new_update(struct sn
 {
 	int ret;
 
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_BE;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_BE);
 	ret = dpcm_run_update_startup(fe, stream);
 	if (ret < 0)
 		dev_err(fe->dev, "ASoC: failed to startup some BEs\n");
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 
 	return ret;
 }
@@ -1950,11 +1990,11 @@ static int dpcm_run_old_update(struct sn
 {
 	int ret;
 
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_BE;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_BE);
 	ret = dpcm_run_update_shutdown(fe, stream);
 	if (ret < 0)
 		dev_err(fe->dev, "ASoC: failed to shutdown some BEs\n");
-	fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+	dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
 
 	return ret;
 }
diff -druNp --no-dereference linux-libre-3.14.25-gnu/sound/usb/quirks.c linux-libre-3.14.26-gnu/sound/usb/quirks.c
--- linux-libre-3.14.25-gnu/sound/usb/quirks.c	2014-11-21 12:23:44.000000000 -0500
+++ linux-libre-3.14.26-gnu/sound/usb/quirks.c	2014-12-06 18:56:06.000000000 -0500
@@ -1142,6 +1142,20 @@ void snd_usb_ctl_msg_quirk(struct usb_de
 	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) &&
 	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
 		mdelay(20);
+
+	/* Marantz/Denon devices with USB DAC functionality need a delay
+	 * after each class compliant request
+	 */
+	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x154e) &&
+	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) {
+
+		switch (le16_to_cpu(dev->descriptor.idProduct)) {
+		case 0x3005: /* Marantz HD-DAC1 */
+		case 0x3006: /* Marantz SA-14S1 */
+			mdelay(20);
+			break;
+		}
+	}
 }
 
 /*
