diff -druN linux-libre-3.6-gnu/arch/alpha/include/asm/exec.h linux-libre-3.7-gnu/arch/alpha/include/asm/exec.h
--- linux-libre-3.6-gnu/arch/alpha/include/asm/exec.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/include/asm/exec.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_EXEC_H
-#define __ALPHA_EXEC_H
-
-#define arch_align_stack(x) (x)
-
-#endif /* __ALPHA_EXEC_H */
diff -druN linux-libre-3.6-gnu/arch/alpha/include/asm/Kbuild linux-libre-3.7-gnu/arch/alpha/include/asm/Kbuild
--- linux-libre-3.6-gnu/arch/alpha/include/asm/Kbuild	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/include/asm/Kbuild	2012-12-10 22:30:57.000000000 -0500
@@ -1,5 +1,7 @@
 include include/asm-generic/Kbuild.asm
 
+generic-y += clkdev.h
+
 header-y += compiler.h
 header-y += console.h
 header-y += fpu.h
@@ -8,3 +10,4 @@
 header-y += reg.h
 header-y += regdef.h
 header-y += sysinfo.h
+generic-y += exec.h
diff -druN linux-libre-3.6-gnu/arch/alpha/include/asm/module.h linux-libre-3.7-gnu/arch/alpha/include/asm/module.h
--- linux-libre-3.6-gnu/arch/alpha/include/asm/module.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/include/asm/module.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,19 +1,13 @@
 #ifndef _ALPHA_MODULE_H
 #define _ALPHA_MODULE_H
 
+#include <asm-generic/module.h>
+
 struct mod_arch_specific
 {
 	unsigned int gotsecindex;
 };
 
-#define Elf_Sym Elf64_Sym
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Ehdr Elf64_Ehdr
-#define Elf_Phdr Elf64_Phdr
-#define Elf_Dyn Elf64_Dyn
-#define Elf_Rel Elf64_Rel
-#define Elf_Rela Elf64_Rela
-
 #define ARCH_SHF_SMALL SHF_ALPHA_GPREL
 
 #ifdef MODULE
diff -druN linux-libre-3.6-gnu/arch/alpha/include/asm/processor.h linux-libre-3.7-gnu/arch/alpha/include/asm/processor.h
--- linux-libre-3.6-gnu/arch/alpha/include/asm/processor.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/include/asm/processor.h	2012-12-10 22:30:57.000000000 -0500
@@ -49,9 +49,6 @@
 /* Free all resources held by a thread. */
 extern void release_thread(struct task_struct *);
 
-/* Create a kernel thread without removing it from tasklists.  */
-extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
 unsigned long get_wchan(struct task_struct *p);
 
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
diff -druN linux-libre-3.6-gnu/arch/alpha/include/asm/thread_info.h linux-libre-3.7-gnu/arch/alpha/include/asm/thread_info.h
--- linux-libre-3.6-gnu/arch/alpha/include/asm/thread_info.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/include/asm/thread_info.h	2012-12-10 22:30:57.000000000 -0500
@@ -7,6 +7,7 @@
 #include <asm/processor.h>
 #include <asm/types.h>
 #include <asm/hwrpb.h>
+#include <asm/sysinfo.h>
 #endif
 
 #ifndef __ASSEMBLY__
@@ -21,6 +22,7 @@
 	mm_segment_t		addr_limit;	/* thread address space */
 	unsigned		cpu;		/* current CPU */
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+	unsigned int		status;		/* thread-synchronous flags */
 
 	int bpt_nsaved;
 	unsigned long bpt_addr[2];		/* breakpoint handling  */
@@ -63,8 +65,6 @@
  * - these are process state flags and used from assembly
  * - pending work-to-be-done flags come first and must be assigned to be
  *   within bits 0 to 7 to fit in and immediate operand.
- * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
- *   control flags.
  *
  * TIF_SYSCALL_TRACE is known to be 0 via blbs.
  */
@@ -72,19 +72,12 @@
 #define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	8	/* poll_idle is polling NEED_RESCHED */
 #define TIF_DIE_IF_KERNEL	9	/* dik recursion lock */
-#define TIF_UAC_NOPRINT		10	/* ! Preserve sequence of following */
-#define TIF_UAC_NOFIX		11	/* ! flags as they match            */
-#define TIF_UAC_SIGBUS		12	/* ! userspace part of 'osf_sysinfo' */
 #define TIF_MEMDIE		13	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 
 /* Work to do on interrupt/exception return.  */
@@ -95,26 +88,62 @@
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
 				 | _TIF_SYSCALL_TRACE)
 
-#define ALPHA_UAC_SHIFT		TIF_UAC_NOPRINT
-#define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
-				 1 << TIF_UAC_SIGBUS)
+#define TS_UAC_NOPRINT		0x0001	/* ! Preserve the following three */
+#define TS_UAC_NOFIX		0x0002	/* ! flags as they match          */
+#define TS_UAC_SIGBUS		0x0004	/* ! userspace part of 'osf_sysinfo' */
+#define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */
+#define TS_POLLING		0x0010	/* idle task polling need_resched,
+					   skip sending interrupt */
 
-#define SET_UNALIGN_CTL(task,value)	({				     \
-	task_thread_info(task)->flags = ((task_thread_info(task)->flags &    \
-		~ALPHA_UAC_MASK)					     \
-		| (((value) << ALPHA_UAC_SHIFT)       & (1<<TIF_UAC_NOPRINT))\
-		| (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
-		| (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags));
+}
+static inline void clear_restore_sigmask(void)
+{
+	current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+}
+static inline bool test_restore_sigmask(void)
+{
+	return current_thread_info()->status & TS_RESTORE_SIGMASK;
+}
+static inline bool test_and_clear_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	if (!(ti->status & TS_RESTORE_SIGMASK))
+		return false;
+	ti->status &= ~TS_RESTORE_SIGMASK;
+	return true;
+}
+#endif
+
+#define SET_UNALIGN_CTL(task,value)	({				\
+	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
+	if (value & PR_UNALIGN_NOPRINT)					\
+		status |= TS_UAC_NOPRINT;				\
+	if (value & PR_UNALIGN_SIGBUS)					\
+		status |= TS_UAC_SIGBUS;				\
+	if (value & 4)	/* alpha-specific */				\
+		status |= TS_UAC_NOFIX;					\
+	task_thread_info(task)->status = status;			\
 	0; })
 
 #define GET_UNALIGN_CTL(task,value)	({				\
-	put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
-		  >> ALPHA_UAC_SHIFT					\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
-		 >> (ALPHA_UAC_SHIFT + 1)				\
-		 | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
-		 >> (ALPHA_UAC_SHIFT - 1),				\
-		 (int __user *)(value));				\
+	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
+	__u32 res = 0;							\
+	if (status & TS_UAC_NOPRINT)					\
+		res |= PR_UNALIGN_NOPRINT;				\
+	if (status & TS_UAC_SIGBUS)					\
+		res |= PR_UNALIGN_SIGBUS;				\
+	if (status & TS_UAC_NOFIX)					\
+		res |= 4;						\
+	put_user(res, (int __user *)(value));				\
 	})
 
 #endif /* __KERNEL__ */
diff -druN linux-libre-3.6-gnu/arch/alpha/include/asm/unistd.h linux-libre-3.7-gnu/arch/alpha/include/asm/unistd.h
--- linux-libre-3.6-gnu/arch/alpha/include/asm/unistd.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/include/asm/unistd.h	2012-12-10 22:30:57.000000000 -0500
@@ -481,6 +481,7 @@
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_EXECVE
 
 /* "Conditional" syscalls.  What we want is
 
diff -druN linux-libre-3.6-gnu/arch/alpha/include/uapi/asm/Kbuild linux-libre-3.7-gnu/arch/alpha/include/uapi/asm/Kbuild
--- linux-libre-3.6-gnu/arch/alpha/include/uapi/asm/Kbuild	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/alpha/include/uapi/asm/Kbuild	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff -druN linux-libre-3.6-gnu/arch/alpha/Kconfig linux-libre-3.7-gnu/arch/alpha/Kconfig
--- linux-libre-3.6-gnu/arch/alpha/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -20,6 +20,10 @@
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
+	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
+	select HAVE_MOD_ARCH_SPECIFIC
+	select MODULES_USE_ELF_RELA
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/alpha_ksyms.c linux-libre-3.7-gnu/arch/alpha/kernel/alpha_ksyms.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/alpha_ksyms.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/alpha_ksyms.c	2012-12-10 22:30:57.000000000 -0500
@@ -50,9 +50,6 @@
 EXPORT_SYMBOL(alpha_write_fp_reg);
 EXPORT_SYMBOL(alpha_write_fp_reg_s);
 
-/* entry.S */
-EXPORT_SYMBOL(kernel_thread);
-
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_tcpudp_magic);
 EXPORT_SYMBOL(ip_compute_csum);
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/entry.S linux-libre-3.7-gnu/arch/alpha/kernel/entry.S
--- linux-libre-3.6-gnu/arch/alpha/kernel/entry.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/entry.S	2012-12-10 22:30:57.000000000 -0500
@@ -311,7 +311,7 @@
 
 	.align	4
 ret_from_sys_call:
-	cmovne	$26, 0, $19		/* $19 = 0 => non-restartable */
+	cmovne	$26, 0, $18		/* $18 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
 	beq	$0, ret_to_kernel
@@ -320,8 +320,8 @@
 		sampling and the rti.  */
 	lda	$16, 7
 	call_pal PAL_swpipl
-	ldl	$5, TI_FLAGS($8)
-	and	$5, _TIF_WORK_MASK, $2
+	ldl	$17, TI_FLAGS($8)
+	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
 	RESTORE_ALL
@@ -341,10 +341,10 @@
 	 * frame to indicate that a negative return value wasn't an
 	 * error number..
 	 */
-	ldq	$19, 0($sp)	/* old syscall nr (zero if success) */
-	beq	$19, $ret_success
+	ldq	$18, 0($sp)	/* old syscall nr (zero if success) */
+	beq	$18, $ret_success
 
-	ldq	$20, 72($sp)	/* .. and this a3 */
+	ldq	$19, 72($sp)	/* .. and this a3 */
 	subq	$31, $0, $0	/* with error in v0 */
 	addq	$31, 1, $1	/* set a3 for errno return */
 	stq	$0, 0($sp)
@@ -362,51 +362,35 @@
  * Do all cleanup when returning from all interrupts and system calls.
  *
  * Arguments:
- *       $5: TI_FLAGS.
  *       $8: current.
- *      $19: The old syscall number, or zero if this is not a return
+ *      $17: TI_FLAGS.
+ *      $18: The old syscall number, or zero if this is not a return
  *           from a syscall that errored and is possibly restartable.
- *      $20: The old a3 value
+ *      $19: The old a3 value
  */
 
 	.align	4
 	.ent	work_pending
 work_pending:
-	and	$5, _TIF_NEED_RESCHED, $2
-	beq	$2, $work_notifysig
+	and	$17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2
+	bne	$2, $work_notifysig
 
 $work_resched:
-	subq	$sp, 16, $sp
-	stq	$19, 0($sp)              /* save syscall nr */
-	stq	$20, 8($sp)              /* and error indication (a3) */
+	/*
+	 * We can get here only if we returned from syscall without SIGPENDING
+	 * or got through work_notifysig already.  Either case means no syscall
+	 * restarts for us, so let $18 and $19 burn.
+	 */
 	jsr	$26, schedule
-	ldq	$19, 0($sp)
-	ldq	$20, 8($sp)
-	addq	$sp, 16, $sp
-	/* Make sure need_resched and sigpending don't change between
-		sampling and the rti.  */
-	lda	$16, 7
-	call_pal PAL_swpipl
-	ldl	$5, TI_FLAGS($8)
-	and	$5, _TIF_WORK_MASK, $2
-	beq	$2, restore_all
-	and	$5, _TIF_NEED_RESCHED, $2
-	bne	$2, $work_resched
+	mov	0, $18
+	br	ret_to_user
 
 $work_notifysig:
 	mov	$sp, $16
 	bsr	$1, do_switch_stack
-	mov	$sp, $17
-	mov	$5, $18
-	mov	$19, $9		/* save old syscall number */
-	mov	$20, $10	/* save old a3 */
-	and	$5, _TIF_SIGPENDING, $2
-	cmovne	$2, 0, $9	/* we don't want double syscall restarts */
-	jsr	$26, do_notify_resume
-	mov	$9, $19
-	mov	$10, $20
+	jsr	$26, do_work_pending
 	bsr	$1, undo_switch_stack
-	br	ret_to_user
+	br	restore_all
 .end work_pending
 
 /*
@@ -418,11 +402,10 @@
 strace:
 	/* set up signal stack, call syscall_trace */
 	bsr	$1, do_switch_stack
-	jsr	$26, syscall_trace
+	jsr	$26, syscall_trace_enter /* returns the syscall number */
 	bsr	$1, undo_switch_stack
 
-	/* get the system call number and the arguments back.. */
-	ldq	$0, 0($sp)
+	/* get the arguments back.. */
 	ldq	$16, SP_OFF+24($sp)
 	ldq	$17, SP_OFF+32($sp)
 	ldq	$18, SP_OFF+40($sp)
@@ -449,15 +432,15 @@
 	stq	$0, 0($sp)		/* save return value */
 
 	bsr	$1, do_switch_stack
-	jsr	$26, syscall_trace
+	jsr	$26, syscall_trace_leave
 	bsr	$1, undo_switch_stack
 	br	$31, ret_from_sys_call
 
 	.align	3
 $strace_error:
-	ldq	$19, 0($sp)	/* old syscall nr (zero if success) */
-	beq	$19, $strace_success
-	ldq	$20, 72($sp)	/* .. and this a3 */
+	ldq	$18, 0($sp)	/* old syscall nr (zero if success) */
+	beq	$18, $strace_success
+	ldq	$19, 72($sp)	/* .. and this a3 */
 
 	subq	$31, $0, $0	/* with error in v0 */
 	addq	$31, 1, $1	/* set a3 for errno return */
@@ -465,11 +448,11 @@
 	stq	$1, 72($sp)	/* a3 for return */
 
 	bsr	$1, do_switch_stack
-	mov	$19, $9		/* save old syscall number */
-	mov	$20, $10	/* save old a3 */
-	jsr	$26, syscall_trace
-	mov	$9, $19
-	mov	$10, $20
+	mov	$18, $9		/* save old syscall number */
+	mov	$19, $10	/* save old a3 */
+	jsr	$26, syscall_trace_leave
+	mov	$9, $18
+	mov	$10, $19
 	bsr	$1, undo_switch_stack
 
 	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
@@ -609,59 +592,20 @@
 .end ret_from_fork
 
 /*
- * kernel_thread(fn, arg, clone_flags)
+ * ... and new kernel threads - here
  */
 	.align 4
-	.globl	kernel_thread
-	.ent	kernel_thread
-kernel_thread:
-	/* We can be called from a module.  */
-	ldgp	$gp, 0($27)
-	.prologue 1
-	subq	$sp, SP_OFF+6*8, $sp
-	br	$1, 2f		/* load start address */
-
-	/* We've now "returned" from a fake system call.  */
-	unop
-	blt	$0, 1f		/* error?  */
-	ldi	$1, 0x3fff
-	beq	$20, 1f		/* parent or child?  */
-
-	bic	$sp, $1, $8	/* in child.  */
-	jsr	$26, ($27)
-	ldgp	$gp, 0($26)
-	mov	$0, $16
-	mov	$31, $26
-	jmp	$31, sys_exit
-
-1:	ret			/* in parent.  */
-
-	.align 4
-2:	/* Fake a system call stack frame, as we can't do system calls
-	   from kernel space.  Note that we store FN and ARG as they
-	   need to be set up in the child for the call.  Also store $8
-	   and $26 for use in the parent.  */
-	stq	$31, SP_OFF($sp)	/* ps */
-	stq	$1, SP_OFF+8($sp)	/* pc */
-	stq	$gp, SP_OFF+16($sp)	/* gp */
-	stq	$16, 136($sp)		/* $27; FN for child */
-	stq	$17, SP_OFF+24($sp)	/* $16; ARG for child */
-	stq	$8, 64($sp)		/* $8 */
-	stq	$26, 128($sp)		/* $26 */
-	/* Avoid the HAE being gratuitously wrong, to avoid restoring it.  */
-	ldq	$2, alpha_mv+HAE_CACHE
-	stq	$2, 152($sp)		/* HAE */
-
-	/* Shuffle FLAGS to the front; add CLONE_VM.  */
-	ldi	$1, CLONE_VM|CLONE_UNTRACED
-	or	$18, $1, $16
-	bsr	$26, sys_clone
-
-	/* We don't actually care for a3 success widgetry in the kernel.
-	   Not for positive errno values.  */
-	stq	$0, 0($sp)		/* $0 */
-	br	ret_to_kernel
-.end kernel_thread
+	.globl	ret_from_kernel_thread
+	.ent	ret_from_kernel_thread
+ret_from_kernel_thread:
+	mov	$17, $16
+	jsr	$26, schedule_tail
+	mov	$9, $27
+	mov	$10, $16
+	jsr	$26, ($9)
+	mov	$31, $19		/* to disable syscall restarts */
+	br	$31, ret_to_user
+.end ret_from_kernel_thread
 
 
 /*
@@ -722,7 +666,7 @@
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_sigreturn
 	bne	$9, 1f
-	jsr	$26, syscall_trace
+	jsr	$26, syscall_trace_leave
 1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_sigreturn
@@ -739,21 +683,12 @@
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_rt_sigreturn
 	bne	$9, 1f
-	jsr	$26, syscall_trace
+	jsr	$26, syscall_trace_leave
 1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_rt_sigreturn
 
 	.align	4
-	.globl	sys_execve
-	.ent	sys_execve
-sys_execve:
-	.prologue 0
-	mov	$sp, $19
-	jmp	$31, do_sys_execve
-.end sys_execve
-
-	.align	4
 	.globl	alpha_ni_syscall
 	.ent	alpha_ni_syscall
 alpha_ni_syscall:
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/osf_sys.c linux-libre-3.7-gnu/arch/alpha/kernel/osf_sys.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/osf_sys.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/osf_sys.c	2012-12-10 22:30:57.000000000 -0500
@@ -145,27 +145,24 @@
 		long __user *, basep)
 {
 	int error;
-	struct file *file;
+	struct fd arg = fdget(fd);
 	struct osf_dirent_callback buf;
 
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
+	if (!arg.file)
+		return -EBADF;
 
 	buf.dirent = dirent;
 	buf.basep = basep;
 	buf.count = count;
 	buf.error = 0;
 
-	error = vfs_readdir(file, osf_filldir, &buf);
+	error = vfs_readdir(arg.file, osf_filldir, &buf);
 	if (error >= 0)
 		error = buf.error;
 	if (count != buf.count)
 		error = count - buf.count;
 
-	fput(file);
- out:
+	fdput(arg);
 	return error;
 }
 
@@ -278,8 +275,8 @@
 	tmp.st_dev	= lstat->dev;
 	tmp.st_mode	= lstat->mode;
 	tmp.st_nlink	= lstat->nlink;
-	tmp.st_uid	= lstat->uid;
-	tmp.st_gid	= lstat->gid;
+	tmp.st_uid	= from_kuid_munged(current_user_ns(), lstat->uid);
+	tmp.st_gid	= from_kgid_munged(current_user_ns(), lstat->gid);
 	tmp.st_rdev	= lstat->rdev;
 	tmp.st_ldev	= lstat->rdev;
 	tmp.st_size	= lstat->size;
@@ -448,11 +445,11 @@
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
-	char *devname;
+	struct filename *devname;
 
 	retval = -EFAULT;
 	if (copy_from_user(&tmp, args, sizeof(tmp)))
@@ -461,18 +458,18 @@
 	retval = PTR_ERR(devname);
 	if (IS_ERR(devname))
 		goto out;
-	retval = do_mount(devname, dirname, "ext2", flags, NULL);
+	retval = do_mount(devname->name, dirname, "ext2", flags, NULL);
 	putname(devname);
  out:
 	return retval;
 }
 
 static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
-	char *devname;
+	struct filename *devname;
 
 	retval = -EFAULT;
 	if (copy_from_user(&tmp, args, sizeof(tmp)))
@@ -481,14 +478,14 @@
 	retval = PTR_ERR(devname);
 	if (IS_ERR(devname))
 		goto out;
-	retval = do_mount(devname, dirname, "iso9660", flags, NULL);
+	retval = do_mount(devname->name, dirname, "iso9660", flags, NULL);
 	putname(devname);
  out:
 	return retval;
 }
 
 static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 
@@ -502,7 +499,7 @@
 		int, flag, void __user *, data)
 {
 	int retval;
-	char *name;
+	struct filename *name;
 
 	name = getname(path);
 	retval = PTR_ERR(name);
@@ -510,13 +507,13 @@
 		goto out;
 	switch (typenr) {
 	case 1:
-		retval = osf_ufs_mount(name, data, flag);
+		retval = osf_ufs_mount(name->name, data, flag);
 		break;
 	case 6:
-		retval = osf_cdfs_mount(name, data, flag);
+		retval = osf_cdfs_mount(name->name, data, flag);
 		break;
 	case 9:
-		retval = osf_procfs_mount(name, data, flag);
+		retval = osf_procfs_mount(name->name, data, flag);
 		break;
 	default:
 		retval = -EINVAL;
@@ -796,8 +793,7 @@
  	case GSI_UACPROC:
 		if (nbytes < sizeof(unsigned int))
 			return -EINVAL;
-		w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
-			UAC_BITMASK;
+		w = current_thread_info()->status & UAC_BITMASK;
 		if (put_user(w, (unsigned int __user *)buffer))
 			return -EFAULT;
  		return 1;
@@ -907,24 +903,20 @@
 		break;
 
  	case SSI_NVPAIRS: {
-		unsigned long v, w, i;
-		unsigned int old, new;
+		unsigned __user *p = buffer;
+		unsigned i;
 		
- 		for (i = 0; i < nbytes; ++i) {
+		for (i = 0, p = buffer; i < nbytes; ++i, p += 2) {
+			unsigned v, w, status;
 
- 			if (get_user(v, 2*i + (unsigned int __user *)buffer))
- 				return -EFAULT;
- 			if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer))
+			if (get_user(v, p) || get_user(w, p + 1))
  				return -EFAULT;
  			switch (v) {
  			case SSIN_UACPROC:
-			again:
-				old = current_thread_info()->flags;
-				new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
-				new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
-				if (cmpxchg(&current_thread_info()->flags,
-					    old, new) != old)
-					goto again;
+				w &= UAC_BITMASK;
+				status = current_thread_info()->status;
+				status = (status & ~UAC_BITMASK) | w;
+				current_thread_info()->status = status;
  				break;
  
  			default:
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/pci.c linux-libre-3.7-gnu/arch/alpha/kernel/pci.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/pci.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/pci.c	2012-12-10 22:30:57.000000000 -0500
@@ -256,12 +256,6 @@
 	}
 }
 
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 int
 pcibios_enable_device(struct pci_dev *dev, int mask)
 {
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/pci-sysfs.c linux-libre-3.7-gnu/arch/alpha/kernel/pci-sysfs.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/pci-sysfs.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/pci-sysfs.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,7 +26,7 @@
 		base = sparse ? hose->sparse_io_base : hose->dense_io_base;
 
 	vma->vm_pgoff += base >> PAGE_SHIFT;
-	vma->vm_flags |= (VM_IO | VM_RESERVED);
+	vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
 
 	return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 				  vma->vm_end - vma->vm_start,
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/process.c linux-libre-3.7-gnu/arch/alpha/kernel/process.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/process.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/process.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,6 +28,7 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/slab.h>
+#include <linux/rcupdate.h>
 
 #include <asm/reg.h>
 #include <asm/uaccess.h>
@@ -48,15 +49,18 @@
 void
 cpu_idle(void)
 {
-	set_thread_flag(TIF_POLLING_NRFLAG);
+	current_thread_info()->status |= TS_POLLING;
 
 	while (1) {
 		/* FIXME -- EV6 and LCA45 know how to power down
 		   the CPU.  */
 
+		rcu_idle_enter();
 		while (!need_resched())
 			cpu_relax();
-		schedule();
+
+		rcu_idle_exit();
+		schedule_preempt_disabled();
 	}
 }
 
@@ -259,33 +263,35 @@
 
 /*
  * Copy an alpha thread..
- *
- * Note the "stack_offset" stuff: when returning to kernel mode, we need
- * to have some extra stack-space for the kernel stack that still exists
- * after the "ret_from_fork".  When returning to user mode, we only want
- * the space needed by the syscall stack frame (ie "struct pt_regs").
- * Use the passed "regs" pointer to determine how much space we need
- * for a kernel fork().
  */
 
 int
 copy_thread(unsigned long clone_flags, unsigned long usp,
-	    unsigned long unused,
+	    unsigned long arg,
 	    struct task_struct * p, struct pt_regs * regs)
 {
 	extern void ret_from_fork(void);
+	extern void ret_from_kernel_thread(void);
 
 	struct thread_info *childti = task_thread_info(p);
-	struct pt_regs * childregs;
-	struct switch_stack * childstack, *stack;
-	unsigned long stack_offset, settls;
+	struct pt_regs *childregs = task_pt_regs(p);
+	struct switch_stack *childstack, *stack;
+	unsigned long settls;
 
-	stack_offset = PAGE_SIZE - sizeof(struct pt_regs);
-	if (!(regs->ps & 8))
-		stack_offset = (PAGE_SIZE-1) & (unsigned long) regs;
-	childregs = (struct pt_regs *)
-	  (stack_offset + PAGE_SIZE + task_stack_page(p));
-		
+	childstack = ((struct switch_stack *) childregs) - 1;
+	if (unlikely(!regs)) {
+		/* kernel thread */
+		memset(childstack, 0,
+			sizeof(struct switch_stack) + sizeof(struct pt_regs));
+		childstack->r26 = (unsigned long) ret_from_kernel_thread;
+		childstack->r9 = usp;	/* function */
+		childstack->r10 = arg;
+		childregs->hae = alpha_mv.hae_cache,
+		childti->pcb.usp = 0;
+		childti->pcb.ksp = (unsigned long) childstack;
+		childti->pcb.flags = 1;	/* set FEN, clear everything else */
+		return 0;
+	}
 	*childregs = *regs;
 	settls = regs->r20;
 	childregs->r0 = 0;
@@ -293,7 +299,6 @@
 	childregs->r20 = 1;	/* OSF/1 has some strange fork() semantics.  */
 	regs->r20 = 0;
 	stack = ((struct switch_stack *) regs) - 1;
-	childstack = ((struct switch_stack *) childregs) - 1;
 	*childstack = *stack;
 	childstack->r26 = (unsigned long) ret_from_fork;
 	childti->pcb.usp = usp;
@@ -382,27 +387,6 @@
 EXPORT_SYMBOL(dump_elf_task_fp);
 
 /*
- * sys_execve() executes a new program.
- */
-asmlinkage int
-do_sys_execve(const char __user *ufilename,
-	      const char __user *const __user *argv,
-	      const char __user *const __user *envp, struct pt_regs *regs)
-{
-	int error;
-	char *filename;
-
-	filename = getname(ufilename);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		goto out;
-	error = do_execve(filename, argv, envp, regs);
-	putname(filename);
-out:
-	return error;
-}
-
-/*
  * Return saved PC of a blocked thread.  This assumes the frame
  * pointer is the 6th saved long on the kernel stack and that the
  * saved return address is the first long in the frame.  This all
@@ -455,22 +439,3 @@
 	}
 	return pc;
 }
-
-int kernel_execve(const char *path, const char *const argv[], const char *const envp[])
-{
-	/* Avoid the HAE being gratuitously wrong, which would cause us
-	   to do the whole turn off interrupts thing and restore it.  */
-	struct pt_regs regs = {.hae = alpha_mv.hae_cache};
-	int err = do_execve(path, argv, envp, &regs);
-	if (!err) {
-		struct pt_regs *p = current_pt_regs();
-		/* copy regs to normal position and off to userland we go... */
-		*p = regs;
-		__asm__ __volatile__ (
-			"mov	%0, $sp;"
-			"br	$31, ret_from_sys_call"
-			: : "r"(p));
-	}
-	return err;
-}
-EXPORT_SYMBOL(kernel_execve);
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/ptrace.c linux-libre-3.7-gnu/arch/alpha/kernel/ptrace.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/ptrace.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/ptrace.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,6 +13,7 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -312,25 +313,18 @@
 	return ret;
 }
 
-asmlinkage void
-syscall_trace(void)
+asmlinkage unsigned long syscall_trace_enter(void)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
+	unsigned long ret = 0;
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(current_pt_regs()))
+		ret = -1UL;
+	return ret ?: current_pt_regs()->r0;
+}
 
-	/*
-	 * This isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+asmlinkage void
+syscall_trace_leave(void)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(current_pt_regs(), 0);
 }
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/signal.c linux-libre-3.7-gnu/arch/alpha/kernel/signal.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/signal.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/signal.c	2012-12-10 22:30:57.000000000 -0500
@@ -298,8 +298,9 @@
 
 static long
 setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, 
-		 struct switch_stack *sw, unsigned long mask, unsigned long sp)
+		 unsigned long mask, unsigned long sp)
 {
+	struct switch_stack *sw = (struct switch_stack *)regs - 1;
 	long i, err = 0;
 
 	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
@@ -354,7 +355,7 @@
 
 static int
 setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
-	    struct pt_regs *regs, struct switch_stack * sw)
+	    struct pt_regs *regs)
 {
 	unsigned long oldsp, r26, err = 0;
 	struct sigframe __user *frame;
@@ -364,7 +365,7 @@
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return -EFAULT;
 
-	err |= setup_sigcontext(&frame->sc, regs, sw, set->sig[0], oldsp);
+	err |= setup_sigcontext(&frame->sc, regs, set->sig[0], oldsp);
 	if (err)
 		return -EFAULT;
 
@@ -401,7 +402,7 @@
 
 static int
 setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-	       sigset_t *set, struct pt_regs *regs, struct switch_stack * sw)
+	       sigset_t *set, struct pt_regs *regs)
 {
 	unsigned long oldsp, r26, err = 0;
 	struct rt_sigframe __user *frame;
@@ -420,7 +421,7 @@
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(oldsp), &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, sw,
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, 
 				set->sig[0], oldsp);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
@@ -464,15 +465,15 @@
  */
 static inline void
 handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-	      struct pt_regs * regs, struct switch_stack *sw)
+	      struct pt_regs * regs)
 {
 	sigset_t *oldset = sigmask_to_save();
 	int ret;
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(sig, ka, info, oldset, regs, sw);
+		ret = setup_rt_frame(sig, ka, info, oldset, regs);
 	else
-		ret = setup_frame(sig, ka, oldset, regs, sw);
+		ret = setup_frame(sig, ka, oldset, regs);
 
 	if (ret) {
 		force_sigsegv(sig, current);
@@ -519,8 +520,7 @@
  * all (if we get here from anything but a syscall return, it will be 0)
  */
 static void
-do_signal(struct pt_regs * regs, struct switch_stack * sw,
-	  unsigned long r0, unsigned long r19)
+do_signal(struct pt_regs *regs, unsigned long r0, unsigned long r19)
 {
 	siginfo_t info;
 	int signr;
@@ -537,7 +537,7 @@
 		/* Whee!  Actually deliver the signal.  */
 		if (r0)
 			syscall_restart(r0, r19, regs, &ka);
-		handle_signal(signr, &ka, &info, regs, sw);
+		handle_signal(signr, &ka, &info, regs);
 		if (single_stepping) 
 			ptrace_set_bpt(current); /* re-set bpt */
 		return;
@@ -568,15 +568,23 @@
 }
 
 void
-do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
-		 unsigned long thread_info_flags,
+do_work_pending(struct pt_regs *regs, unsigned long thread_flags,
 		 unsigned long r0, unsigned long r19)
 {
-	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs, sw, r0, r19);
-
-	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
+	do {
+		if (thread_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			local_irq_enable();
+			if (thread_flags & _TIF_SIGPENDING) {
+				do_signal(regs, r0, r19);
+				r0 = 0;
+			} else {
+				clear_thread_flag(TIF_NOTIFY_RESUME);
+				tracehook_notify_resume(regs);
+			}
+		}
+		local_irq_disable();
+		thread_flags = current_thread_info()->flags;
+	} while (thread_flags & _TIF_WORK_MASK);
 }
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/smp.c linux-libre-3.7-gnu/arch/alpha/kernel/smp.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/smp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/smp.c	2012-12-10 22:30:57.000000000 -0500
@@ -166,6 +166,7 @@
 	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
 	      cpuid, current, current->active_mm));
 
+	preempt_disable();
 	/* Do nothing.  */
 	cpu_idle();
 }
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/srmcons.c linux-libre-3.7-gnu/arch/alpha/kernel/srmcons.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/srmcons.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/srmcons.c	2012-12-10 22:30:57.000000000 -0500
@@ -223,6 +223,7 @@
 		driver->subtype = SYSTEM_TYPE_SYSCONS;
 		driver->init_termios = tty_std_termios;
 		tty_set_operations(driver, &srmcons_ops);
+		tty_port_link_device(&srmcons_singleton.port, driver, 0);
 		err = tty_register_driver(driver);
 		if (err) {
 			put_tty_driver(driver);
diff -druN linux-libre-3.6-gnu/arch/alpha/kernel/traps.c linux-libre-3.7-gnu/arch/alpha/kernel/traps.c
--- linux-libre-3.6-gnu/arch/alpha/kernel/traps.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/alpha/kernel/traps.c	2012-12-10 22:30:57.000000000 -0500
@@ -780,17 +780,17 @@
 	/* Check the UAC bits to decide what the user wants us to do
 	   with the unaliged access.  */
 
-	if (!test_thread_flag (TIF_UAC_NOPRINT)) {
+	if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
 		if (__ratelimit(&ratelimit)) {
 			printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
 			       current->comm, task_pid_nr(current),
 			       regs->pc - 4, va, opcode, reg);
 		}
 	}
-	if (test_thread_flag (TIF_UAC_SIGBUS))
+	if ((current_thread_info()->status & TS_UAC_SIGBUS))
 		goto give_sigbus;
 	/* Not sure why you'd want to use this, but... */
-	if (test_thread_flag (TIF_UAC_NOFIX))
+	if ((current_thread_info()->status & TS_UAC_NOFIX))
 		return;
 
 	/* Don't bother reading ds in the access check since we already
diff -druN linux-libre-3.6-gnu/arch/arm/boot/compressed/decompress.c linux-libre-3.7-gnu/arch/arm/boot/compressed/decompress.c
--- linux-libre-3.6-gnu/arch/arm/boot/compressed/decompress.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/compressed/decompress.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,6 +32,9 @@
 #  define Tracecv(c,x)
 #endif
 
+/* Not needed, but used in some headers pulled in by decompressors */
+extern char * strstr(const char * s1, const char *s2);
+
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/boot/compressed/.gitignore linux-libre-3.7-gnu/arch/arm/boot/compressed/.gitignore
--- linux-libre-3.6-gnu/arch/arm/boot/compressed/.gitignore	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/compressed/.gitignore	2012-12-10 22:30:57.000000000 -0500
@@ -1,6 +1,7 @@
 ashldi3.S
 font.c
 lib1funcs.S
+hyp-stub.S
 piggy.gzip
 piggy.lzo
 piggy.lzma
diff -druN linux-libre-3.6-gnu/arch/arm/boot/compressed/head.S linux-libre-3.7-gnu/arch/arm/boot/compressed/head.S
--- linux-libre-3.6-gnu/arch/arm/boot/compressed/head.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/compressed/head.S	2012-12-10 22:30:57.000000000 -0500
@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 /*
  * Debugging stuff
@@ -132,7 +133,12 @@
 		.word	start			@ absolute load/run zImage address
 		.word	_edata			@ zImage end address
  THUMB(		.thumb			)
-1:		mov	r7, r1			@ save architecture ID
+1:
+		mrs	r9, cpsr
+#ifdef CONFIG_ARM_VIRT_EXT
+		bl	__hyp_stub_install	@ get into SVC mode, reversibly
+#endif
+		mov	r7, r1			@ save architecture ID
 		mov	r8, r2			@ save atags pointer
 
 #ifndef __ARM_ARCH_2__
@@ -148,9 +154,9 @@
  ARM(		swi	0x123456	)	@ angel_SWI_ARM
  THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
-		mrs	r2, cpsr		@ turn off interrupts to
-		orr	r2, r2, #0xc0		@ prevent angel from running
-		msr	cpsr_c, r2
+		safe_svcmode_maskall r0
+		msr	spsr_cxsf, r9		@ Save the CPU boot mode in
+						@ SPSR
 #else
 		teqp	pc, #0x0c000003		@ turn off interrupts
 #endif
@@ -350,6 +356,20 @@
 		adr	r5, restart
 		bic	r5, r5, #31
 
+/* Relocate the hyp vector base if necessary */
+#ifdef CONFIG_ARM_VIRT_EXT
+		mrs	r0, spsr
+		and	r0, r0, #MODE_MASK
+		cmp	r0, #HYP_MODE
+		bne	1f
+
+		bl	__hyp_get_vectors
+		sub	r0, r0, r5
+		add	r0, r0, r10
+		bl	__hyp_set_vectors
+1:
+#endif
+
 		sub	r9, r6, r5		@ size to copy
 		add	r9, r9, #31		@ rounded up to a multiple
 		bic	r9, r9, #31		@ ... of 32 bytes
@@ -458,11 +478,29 @@
 		bl	decompress_kernel
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r0, #0			@ must be zero
 		mov	r1, r7			@ restore architecture number
 		mov	r2, r8			@ restore atags pointer
- ARM(		mov	pc, r4	)		@ call kernel
- THUMB(		bx	r4	)		@ entry point is always ARM
+
+#ifdef CONFIG_ARM_VIRT_EXT
+		mrs	r0, spsr		@ Get saved CPU boot mode
+		and	r0, r0, #MODE_MASK
+		cmp	r0, #HYP_MODE		@ if not booted in HYP mode...
+		bne	__enter_kernel		@ boot kernel directly
+
+		adr	r12, .L__hyp_reentry_vectors_offset
+		ldr	r0, [r12]
+		add	r0, r0, r12
+
+		bl	__hyp_set_vectors
+		__HVC(0)			@ otherwise bounce to hyp mode
+
+		b	.			@ should never be reached
+
+		.align	2
+.L__hyp_reentry_vectors_offset:	.long	__hyp_reentry_vectors - .
+#else
+		b	__enter_kernel
+#endif
 
 		.align	2
 		.type	LC0, #object
@@ -614,6 +652,15 @@
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+		mcr	p15, 0, r0, c1, c0, 0	@ write SCTLR
+		b	__armv4_mmu_cache_on
+
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 		mov	r0, #4			@ put dcache in WT mode
@@ -656,6 +703,9 @@
 		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
@@ -876,7 +926,7 @@
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv6_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
@@ -1196,6 +1246,25 @@
 #endif
 
 		.ltorg
+
+#ifdef CONFIG_ARM_VIRT_EXT
+.align 5
+__hyp_reentry_vectors:
+		W(b)	.			@ reset
+		W(b)	.			@ undef
+		W(b)	.			@ svc
+		W(b)	.			@ pabort
+		W(b)	.			@ dabort
+		W(b)	__enter_kernel		@ hyp
+		W(b)	.			@ irq
+		W(b)	.			@ fiq
+#endif /* CONFIG_ARM_VIRT_EXT */
+
+__enter_kernel:
+		mov	r0, #0			@ must be 0
+ ARM(		mov	pc, r4	)		@ call kernel
+ THUMB(		bx	r4	)		@ entry point is always ARM
+
 reloc_code_end:
 
 		.align
diff -druN linux-libre-3.6-gnu/arch/arm/boot/compressed/Makefile linux-libre-3.7-gnu/arch/arm/boot/compressed/Makefile
--- linux-libre-3.6-gnu/arch/arm/boot/compressed/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/compressed/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -30,6 +30,10 @@
 OBJS		+= string.o
 CFLAGS_string.o	:= -Os
 
+ifeq ($(CONFIG_ARM_VIRT_EXT),y)
+OBJS		+= hyp-stub.o
+endif
+
 #
 # Architecture dependencies
 #
@@ -126,7 +130,7 @@
 endif
 
 ccflags-y := -fpic -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all
+asflags-y := -Wa,-march=all -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
@@ -198,3 +202,6 @@
 
 $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
 	@sed "$(SEDFLAGS)" < $< > $@
+
+$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
+	$(call cmd,shipped)
diff -druN linux-libre-3.6-gnu/arch/arm/boot/compressed/misc.c linux-libre-3.7-gnu/arch/arm/boot/compressed/misc.c
--- linux-libre-3.6-gnu/arch/arm/boot/compressed/misc.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/compressed/misc.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,13 @@
 static void putstr(const char *ptr);
 extern void error(char *x);
 
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+static inline void putc(int c) {}
+static inline void flush(void) {}
+static inline void arch_decomp_setup(void) {}
+#else
 #include <mach/uncompress.h>
+#endif
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/am335x-bone.dts linux-libre-3.7-gnu/arch/arm/boot/dts/am335x-bone.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/am335x-bone.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/am335x-bone.dts	2012-12-10 22:30:57.000000000 -0500
@@ -17,4 +17,64 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@24 {
+				reg = <0x24>;
+			};
+
+		};
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/am335x-evm.dts linux-libre-3.7-gnu/arch/arm/boot/dts/am335x-evm.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/am335x-evm.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/am335x-evm.dts	2012-12-10 22:30:57.000000000 -0500
@@ -17,4 +17,104 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/am33xx.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/am33xx.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/am33xx.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/am33xx.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -69,95 +69,146 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x44e07000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <96>;
 		};
 
-		gpio2: gpio@4804C000 {
+		gpio2: gpio@4804c000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x4804c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <98>;
 		};
 
-		gpio3: gpio@481AC000 {
+		gpio3: gpio@481ac000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ac000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <32>;
 		};
 
-		gpio4: gpio@481AE000 {
+		gpio4: gpio@481ae000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ae000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <62>;
 		};
 
-		uart1: serial@44E09000 {
+		uart1: serial@44e09000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
+			reg = <0x44e09000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <72>;
+			status = "disabled";
 		};
 
 		uart2: serial@48022000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
+			reg = <0x48022000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <73>;
+			status = "disabled";
 		};
 
 		uart3: serial@48024000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
+			reg = <0x48024000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <74>;
+			status = "disabled";
 		};
 
-		uart4: serial@481A6000 {
+		uart4: serial@481a6000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
+			reg = <0x481a6000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <44>;
+			status = "disabled";
 		};
 
-		uart5: serial@481A8000 {
+		uart5: serial@481a8000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
+			reg = <0x481a8000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <45>;
+			status = "disabled";
 		};
 
-		uart6: serial@481AA000 {
+		uart6: serial@481aa000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
+			reg = <0x481aa000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <46>;
+			status = "disabled";
 		};
 
-		i2c1: i2c@44E0B000 {
+		i2c1: i2c@44e0b000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
+			reg = <0x44e0b000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <70>;
+			status = "disabled";
 		};
 
-		i2c2: i2c@4802A000 {
+		i2c2: i2c@4802a000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <71>;
+			status = "disabled";
 		};
 
-		i2c3: i2c@4819C000 {
+		i2c3: i2c@4819c000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
+			reg = <0x4819c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <30>;
+			status = "disabled";
 		};
 
 		wdt2: wdt@44e35000 {
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
+			reg = <0x44e35000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <91>;
 		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/armada-370.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/armada-370.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/armada-370.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/armada-370.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -21,6 +21,12 @@
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
 	mpic: interrupt-controller@d0020000 {
 	      reg = <0xd0020a00 0x1d0>,
 		    <0xd0021870 0x58>;
@@ -31,5 +37,43 @@
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+		pinctrl {
+			compatible = "marvell,mv88f6710-pinctrl";
+			reg = <0xd0018000 0x38>;
+	        };
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <82>, <83>, <84>, <85>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <87>, <88>, <89>, <90>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
+			ngpios = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <91>;
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/armada-370-xp.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/armada-370-xp.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/armada-370-xp.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/armada-370-xp.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -63,6 +63,11 @@
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
 		};
+
+		addr-decoding@d0020000 {
+			compatible = "marvell,armada-addr-decoding-controller";
+			reg = <0xd0020000 0x258>;
+		};
 	};
 };
 
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-db.dts linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-db.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-db.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-db.dts	2012-12-10 22:30:57.000000000 -0500
@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78230-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <17>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78260-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-mv78460.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-mv78460.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/armada-xp-mv78460.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/armada-xp-mv78460.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78460-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+ };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9260.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9260.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9260.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9260.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -28,6 +28,7 @@
 		gpio2 = &pioC;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		i2c0 = &i2c0;
 	};
 	cpus {
 		cpu@0 {
@@ -202,6 +203,15 @@
 				status = "disabled";
 			};
 
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			adc0: adc@fffe0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9263.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9263.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9263.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9263.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -24,6 +24,7 @@
 		gpio3 = &pioD;
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
+		i2c0 = &i2c0;
 	};
 	cpus {
 		cpu@0 {
@@ -185,6 +186,15 @@
 				interrupts = <24 4 2>;
 				status = "disabled";
 			};
+
+			i2c0: i2c@fff88000 {
+				compatible = "atmel,at91sam9263-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g20.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g20.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g20.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g20.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -18,6 +18,10 @@
 
 	ahb {
 		apb {
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9g20-i2c";
+			};
+
 			adc0: adc@fffe0000 {
 				atmel,adc-startup-time = <40>;
 			};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -126,14 +126,14 @@
 		#size-cells = <0>;
 
 		btn3 {
-			label = "Buttin 3";
+			label = "Button 3";
 			gpios = <&pioA 30 1>;
 			linux,code = <0x103>;
 			gpio-key,wakeup;
 		};
 
 		btn4 {
-			label = "Buttin 4";
+			label = "Button 4";
 			gpios = <&pioA 31 1>;
 			linux,code = <0x104>;
 			gpio-key,wakeup;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g25ek.dts linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g25ek.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g25ek.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g25ek.dts	2012-12-10 22:30:57.000000000 -0500
@@ -32,6 +32,18 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c2: i2c@f8018000 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00600000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g45.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g45.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9g45.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9g45.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -29,6 +29,8 @@
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 	};
 	cpus {
 		cpu@0 {
@@ -206,6 +208,24 @@
 				status = "disabled";
 			};
 
+			i2c0: i2c@fff84000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff84000 0x100>;
+				interrupts = <12 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fff88000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			adc0: adc@fffb0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffb0000 0x100>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9m10g45ek.dts linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9m10g45ek.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9m10g45ek.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9m10g45ek.dts	2012-12-10 22:30:57.000000000 -0500
@@ -46,6 +46,14 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+
+			i2c0: i2c@fff84000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@fff88000 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9n12.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9n12.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9n12.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9n12.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -26,6 +26,8 @@
 		gpio3 = &pioD;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 	};
 	cpus {
 		cpu@0 {
@@ -182,6 +184,24 @@
 				atmel,use-dma-tx;
 				status = "disabled";
 			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9n12ek.dts linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9n12ek.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9n12ek.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9n12ek.dts	2012-12-10 22:30:57.000000000 -0500
@@ -37,6 +37,14 @@
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8014000 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9x5.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9x5.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/at91sam9x5.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/at91sam9x5.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -27,6 +27,9 @@
 		gpio3 = &pioD;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 	};
 	cpus {
 		cpu@0 {
@@ -196,6 +199,33 @@
 				status = "disabled";
 			};
 
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8018000 0x100>;
+				interrupts = <11 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			adc0: adc@f804c000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/bcm2835.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/bcm2835.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/bcm2835.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/bcm2835.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,39 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+
+	chosen {
+		bootargs = "earlyprintk console=ttyAMA0";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+
+		timer {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			clock-frequency = <1000000>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart@20201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clock-frequency = <3000000>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-libre-3.7-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,12 @@
+/dts-v1/;
+/memreserve/ 0x0c000000 0x04000000;
+/include/ "bcm2835.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory {
+		reg = <0 0x10000000>;
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/db8500.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/db8500.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/db8500.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/db8500.dtsi	1969-12-31 19:00:00.000000000 -0500
@@ -1,592 +0,0 @@
-/*
- * Copyright 2012 Linaro Ltd
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	soc-u9500 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "stericsson,db8500";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		intc: interrupt-controller@a0411000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xa0411000 0x1000>,
-			      <0xa0410100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 0x4>;
-		};
-
-		timer@a0410600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>;
-		};
-
-		rtc@80154000 {
-			compatible = "arm,rtc-pl031", "arm,primecell";
-			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 0x4>;
-		};
-
-		gpio0: gpio@8012e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <0>;
-		};
-
-		gpio1: gpio@8012e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <1>;
-		};
-
-		gpio2: gpio@8000e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <2>;
-		};
-
-		gpio3: gpio@8000e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <3>;
-		};
-
-		gpio4: gpio@8000e100 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <4>;
-		};
-
-		gpio5: gpio@8000e180 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <5>;
-		};
-
-		gpio6: gpio@8011e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <6>;
-		};
-
-		gpio7: gpio@8011e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <7>;
-		};
-
-		gpio8: gpio@a03fe000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <8>;
-		};
-
-		pinctrl {
-			compatible = "stericsson,nmk_pinctrl";
-		};
-
-		usb@a03e0000 {
-			compatible = "stericsson,db8500-musb",
-				"mentor,musb";
-			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 0x4>;
-		};
-
-		dma-controller@801C0000 {
-			compatible = "stericsson,db8500-dma40",
-					"stericsson,dma40";
-			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			interrupts = <0 25 0x4>;
-		};
-
-		prcmu@80157000 {
-			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
-			interrupts = <0 47 0x4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			prcmu-timer-4@80157450 {
-				compatible = "stericsson,db8500-prcmu-timer-4";
-				reg = <0x80157450 0xC>;
-			};
-
-			db8500-prcmu-regulators {
-				compatible = "stericsson,db8500-prcmu-regulator";
-
-				// DB8500_REGULATOR_VAPE
-				db8500_vape_reg: db8500_vape {
-					regulator-compatible = "db8500_vape";
-					regulator-name = "db8500-vape";
-					regulator-always-on;
-				};
-
-				// DB8500_REGULATOR_VARM
-				db8500_varm_reg: db8500_varm {
-					regulator-compatible = "db8500_varm";
-					regulator-name = "db8500-varm";
-				};
-
-				// DB8500_REGULATOR_VMODEM
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-compatible = "db8500_vmodem";
-					regulator-name = "db8500-vmodem";
-				};
-
-				// DB8500_REGULATOR_VPLL
-				db8500_vpll_reg: db8500_vpll {
-					regulator-compatible = "db8500_vpll";
-					regulator-name = "db8500-vpll";
-				};
-
-				// DB8500_REGULATOR_VSMPS1
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-compatible = "db8500_vsmps1";
-					regulator-name = "db8500-vsmps1";
-				};
-
-				// DB8500_REGULATOR_VSMPS2
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-compatible = "db8500_vsmps2";
-					regulator-name = "db8500-vsmps2";
-				};
-
-				// DB8500_REGULATOR_VSMPS3
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-compatible = "db8500_vsmps3";
-					regulator-name = "db8500-vsmps3";
-				};
-
-				// DB8500_REGULATOR_VRF1
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-compatible = "db8500_vrf1";
-					regulator-name = "db8500-vrf1";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSP
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-compatible = "db8500_sva_mmdsp";
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-compatible = "db8500_sva_mmdsp_ret";
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAPIPE
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-compatible = "db8500_sva_pipe";
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSP
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-compatible = "db8500_sia_mmdsp";
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAPIPE
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-compatible = "db8500_sia_pipe";
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SGA
-				db8500_sga_reg: db8500_sga {
-					regulator-compatible = "db8500_sga";
-					regulator-name = "db8500-sga";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-compatible = "db8500_b2r2_mcde";
-					regulator-name = "db8500-b2r2-mcde";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-compatible = "db8500_esram12";
-					regulator-name = "db8500-esram12";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12RET
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-compatible = "db8500_esram12_ret";
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-compatible = "db8500_esram34";
-					regulator-name = "db8500-esram34";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34RET
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-compatible = "db8500_esram34_ret";
-					regulator-name = "db8500-esram34-ret";
-				};
-			};
-
-			ab8500@5 {
-				compatible = "stericsson,ab8500";
-				reg = <5>; /* mailbox 5 is i2c */
-				interrupts = <0 40 0x4>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				ab8500-rtc {
-					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 0x4
-					              18 0x4>;
-					interrupt-names = "60S", "ALARM";
-				};
-
-				ab8500-gpadc {
-					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 0x4
-						      39 0x4>;
-					interrupt-names = "HW_CONV_END", "SW_CONV_END";
-					vddadc-supply = <&ab8500_ldo_tvout_reg>;
-				};
-
-				ab8500-usb {
-					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 0x4
-						       96 0x4
-						       14 0x4
-						       15 0x4
-						       79 0x4
-						       74 0x4
-						       75 0x4>;
-					interrupt-names = "ID_WAKEUP_R",
-							  "ID_WAKEUP_F",
-							  "VBUS_DET_F",
-							  "VBUS_DET_R",
-							  "USB_LINK_STATUS",
-							  "USB_ADP_PROBE_PLUG",
-							  "USB_ADP_PROBE_UNPLUG";
-					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
-					v-ape-supply = <&db8500_vape_reg>;
-					musb_1v8-supply = <&db8500_vsmps2_reg>;
-				};
-
-				ab8500-ponkey {
-					compatible = "stericsson,ab8500-ponkey";
-					interrupts = <6 0x4
-						      7 0x4>;
-					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-				};
-
-				ab8500-sysctrl {
-					compatible = "stericsson,ab8500-sysctrl";
-				};
-
-				ab8500-pwm {
-					compatible = "stericsson,ab8500-pwm";
-				};
-
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				ab8500-regulators {
-					compatible = "stericsson,ab8500-regulator";
-
-					// supplies to the display/camera
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-compatible = "ab8500_ldo_aux1";
-						regulator-name = "V-DISPLAY";
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2900000>;
-						regulator-boot-on;
-						/* BUG: If turned off MMC will be affected. */
-						regulator-always-on;
-					};
-
-					// supplies to the on-board eMMC
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-compatible = "ab8500_ldo_aux2";
-						regulator-name = "V-eMMC1";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for VAUX3; SDcard slots
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-compatible = "ab8500_ldo_aux3";
-						regulator-name = "V-MMC-SD";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for v-intcore12; VINTCORE12 LDO
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
-						regulator-compatible = "ab8500_ldo_initcore";
-						regulator-name = "V-INTCORE";
-					};
-
-					// supply for tvout; gpadc; TVOUT LDO
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-compatible = "ab8500_ldo_tvout";
-						regulator-name = "V-TVOUT";
-					};
-
-					// supply for ab8500-usb; USB LDO
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-compatible = "ab8500_ldo_usb";
-						regulator-name = "dummy";
-					};
-
-					// supply for ab8500-vaudio; VAUDIO LDO
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-compatible = "ab8500_ldo_audio";
-						regulator-name = "V-AUD";
-					};
-
-					// supply for v-anamic1 VAMic1-LDO
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-compatible = "ab8500_ldo_anamic1";
-						regulator-name = "V-AMIC1";
-					};
-
-					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
-						regulator-compatible = "ab8500_ldo_amamic2";
-						regulator-name = "V-AMIC2";
-					};
-
-					// supply for v-dmic; VDMIC LDO
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-compatible = "ab8500_ldo_dmic";
-						regulator-name = "V-DMIC";
-					};
-
-					// supply for U8500 CSI/DSI; VANA LDO
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-compatible = "ab8500_ldo_ana";
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
-		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ssp@80002000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <80002000 0x1000>;
-			interrupts = <0 14 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			// Add one of these for each child device
-			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
-				    &gpio6 22 0x4 &gpio7 0 0x4>;
-
-		};
-
-		uart@80120000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 0x4>;
-			status = "disabled";
-		};
-		uart@80121000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 0x4>;
-			status = "disabled";
-		};
-		uart@80007000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 0x4>;
-			status = "disabled";
-		};
-
-		sdi@80126000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 0x4>;
-			status = "disabled";
-		};
-		sdi@80118000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 0x4>;
-			status = "disabled";
-		};
-		sdi@80005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 0x4>;
-			status = "disabled";
-		};
-		sdi@80119000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 0x4>;
-			status = "disabled";
-		};
-		sdi@80114000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 0x4>;
-			status = "disabled";
-		};
-		sdi@80008000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 100 0x4>;
-			status = "disabled";
-		};
-
-		external-bus@50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x4000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000000>;
-			status = "disabled";
-		};
-	};
-};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/dbx5x0.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/dbx5x0.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/dbx5x0.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/dbx5x0.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,664 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	soc-u9500 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		intc: interrupt-controller@a0411000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xa0411000 0x1000>,
+			      <0xa0410100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xa0412000 0x1000>;
+			interrupts = <0 13 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 7 0x4>;
+		};
+
+		timer@a0410600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xa0410600 0x20>;
+			interrupts = <1 13 0x304>;
+		};
+
+		rtc@80154000 {
+			compatible = "arm,rtc-pl031", "arm,primecell";
+			reg = <0x80154000 0x1000>;
+			interrupts = <0 18 0x4>;
+		};
+
+		gpio0: gpio@8012e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e000 0x80>;
+			interrupts = <0 119 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
+		};
+
+		gpio1: gpio@8012e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e080 0x80>;
+			interrupts = <0 120 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
+		};
+
+		gpio2: gpio@8000e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e000 0x80>;
+			interrupts = <0 121 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
+		};
+
+		gpio3: gpio@8000e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e080 0x80>;
+			interrupts = <0 122 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
+		};
+
+		gpio4: gpio@8000e100 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e100 0x80>;
+			interrupts = <0 123 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
+		};
+
+		gpio5: gpio@8000e180 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e180 0x80>;
+			interrupts = <0 124 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
+		};
+
+		gpio6: gpio@8011e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e000 0x80>;
+			interrupts = <0 125 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
+		};
+
+		gpio7: gpio@8011e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e080 0x80>;
+			interrupts = <0 126 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
+		};
+
+		gpio8: gpio@a03fe000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0xa03fe000 0x80>;
+			interrupts = <0 127 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
+		};
+
+		pinctrl {
+			compatible = "stericsson,nmk_pinctrl";
+		};
+
+		usb@a03e0000 {
+			compatible = "stericsson,db8500-musb",
+				"mentor,musb";
+			reg = <0xa03e0000 0x10000>;
+			interrupts = <0 23 0x4>;
+		};
+
+		dma-controller@801C0000 {
+			compatible = "stericsson,db8500-dma40",
+					"stericsson,dma40";
+			reg = <0x801C0000 0x1000 0x40010000 0x800>;
+			interrupts = <0 25 0x4>;
+		};
+
+		prcmu@80157000 {
+			compatible = "stericsson,db8500-prcmu";
+			reg = <0x80157000 0x1000>;
+			interrupts = <0 47 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			prcmu-timer-4@80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
+
+			db8500-prcmu-regulators {
+				compatible = "stericsson,db8500-prcmu-regulator";
+
+				// DB8500_REGULATOR_VAPE
+				db8500_vape_reg: db8500_vape {
+					regulator-compatible = "db8500_vape";
+					regulator-name = "db8500-vape";
+					regulator-always-on;
+				};
+
+				// DB8500_REGULATOR_VARM
+				db8500_varm_reg: db8500_varm {
+					regulator-compatible = "db8500_varm";
+					regulator-name = "db8500-varm";
+				};
+
+				// DB8500_REGULATOR_VMODEM
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-compatible = "db8500_vmodem";
+					regulator-name = "db8500-vmodem";
+				};
+
+				// DB8500_REGULATOR_VPLL
+				db8500_vpll_reg: db8500_vpll {
+					regulator-compatible = "db8500_vpll";
+					regulator-name = "db8500-vpll";
+				};
+
+				// DB8500_REGULATOR_VSMPS1
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-compatible = "db8500_vsmps1";
+					regulator-name = "db8500-vsmps1";
+				};
+
+				// DB8500_REGULATOR_VSMPS2
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-compatible = "db8500_vsmps2";
+					regulator-name = "db8500-vsmps2";
+				};
+
+				// DB8500_REGULATOR_VSMPS3
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-compatible = "db8500_vsmps3";
+					regulator-name = "db8500-vsmps3";
+				};
+
+				// DB8500_REGULATOR_VRF1
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-compatible = "db8500_vrf1";
+					regulator-name = "db8500-vrf1";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSP
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-compatible = "db8500_sva_mmdsp";
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-compatible = "db8500_sva_mmdsp_ret";
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAPIPE
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-compatible = "db8500_sva_pipe";
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSP
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-compatible = "db8500_sia_mmdsp";
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAPIPE
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-compatible = "db8500_sia_pipe";
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SGA
+				db8500_sga_reg: db8500_sga {
+					regulator-compatible = "db8500_sga";
+					regulator-name = "db8500-sga";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-compatible = "db8500_b2r2_mcde";
+					regulator-name = "db8500-b2r2-mcde";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-compatible = "db8500_esram12";
+					regulator-name = "db8500-esram12";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12RET
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-compatible = "db8500_esram12_ret";
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-compatible = "db8500_esram34";
+					regulator-name = "db8500-esram34";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34RET
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-compatible = "db8500_esram34_ret";
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
+
+			ab8500@5 {
+				compatible = "stericsson,ab8500";
+				reg = <5>; /* mailbox 5 is i2c */
+				interrupt-parent = <&intc>;
+				interrupts = <0 40 0x4>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 0x4
+					              18 0x4>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 0x4
+						      39 0x4>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+				};
+
+				ab8500-usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 0x4
+						       96 0x4
+						       14 0x4
+						       15 0x4
+						       79 0x4
+						       74 0x4
+						       75 0x4>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 0x4
+						      7 0x4>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ab8500-regulators {
+					compatible = "stericsson,ab8500-regulator";
+
+					// supplies to the display/camera
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-compatible = "ab8500_ldo_aux1";
+						regulator-name = "V-DISPLAY";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+						/* BUG: If turned off MMC will be affected. */
+						regulator-always-on;
+					};
+
+					// supplies to the on-board eMMC
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-compatible = "ab8500_ldo_aux2";
+						regulator-name = "V-eMMC1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for VAUX3; SDcard slots
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-compatible = "ab8500_ldo_aux3";
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-compatible = "ab8500_ldo_initcore";
+						regulator-name = "V-INTCORE";
+					};
+
+					// supply for tvout; gpadc; TVOUT LDO
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-compatible = "ab8500_ldo_tvout";
+						regulator-name = "V-TVOUT";
+					};
+
+					// supply for ab8500-usb; USB LDO
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-compatible = "ab8500_ldo_usb";
+						regulator-name = "dummy";
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-compatible = "ab8500_ldo_audio";
+						regulator-name = "V-AUD";
+					};
+
+					// supply for v-anamic1 VAMic1-LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-compatible = "ab8500_ldo_anamic1";
+						regulator-name = "V-AMIC1";
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-compatible = "ab8500_ldo_amamic2";
+						regulator-name = "V-AMIC2";
+					};
+
+					// supply for v-dmic; VDMIC LDO
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-compatible = "ab8500_ldo_dmic";
+						regulator-name = "V-DMIC";
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-compatible = "ab8500_ldo_ana";
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+
+		i2c@80004000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80004000 0x1000>;
+			interrupts = <0 21 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+		};
+
+		i2c@80122000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80122000 0x1000>;
+			interrupts = <0 22 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+		};
+
+		i2c@80128000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80128000 0x1000>;
+			interrupts = <0 55 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+		};
+
+		i2c@80110000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80110000 0x1000>;
+			interrupts = <0 12 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+		};
+
+		i2c@8012a000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x8012a000 0x1000>;
+			interrupts = <0 51 0x4>;
+			arm,primecell-periphid = <0x180024>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+		};
+
+		ssp@80002000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80002000 0x1000>;
+			interrupts = <0 14 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			// Add one of these for each child device
+			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
+				    &gpio6 22 0x4 &gpio7 0 0x4>;
+
+		};
+
+		uart@80120000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80120000 0x1000>;
+			interrupts = <0 11 0x4>;
+			status = "disabled";
+		};
+		uart@80121000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80121000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+		uart@80007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80007000 0x1000>;
+			interrupts = <0 26 0x4>;
+			status = "disabled";
+		};
+
+		sdi@80126000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80126000 0x1000>;
+			interrupts = <0 60 0x4>;
+			status = "disabled";
+		};
+
+		sdi@80118000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80118000 0x1000>;
+			interrupts = <0 50 0x4>;
+			status = "disabled";
+		};
+
+		sdi@80005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80005000 0x1000>;
+			interrupts = <0 41 0x4>;
+			status = "disabled";
+		};
+
+		sdi@80119000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80119000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+
+		sdi@80114000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		sdi@80008000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80008000 0x1000>;
+			interrupts = <0 100 0x4>;
+			status = "disabled";
+		};
+
+		msp0: msp@80123000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80123000 0x1000>;
+			interrupts = <0 31 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		msp1: msp@80124000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80124000 0x1000>;
+			interrupts = <0 62 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		// HDMI sound
+		msp2: msp@80117000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80117000 0x1000>;
+			interrupts = <0 98 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		msp3: msp@80125000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80125000 0x1000>;
+			interrupts = <0 62 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/dove-cm-a510.dts linux-libre-3.7-gnu/arch/arm/boot/dts/dove-cm-a510.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/dove-cm-a510.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/dove-cm-a510.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/dove-cubox.dts linux-libre-3.7-gnu/arch/arm/boot/dts/dove-cubox.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/dove-cubox.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/dove-cubox.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/dove-dove-db.dts linux-libre-3.7-gnu/arch/arm/boot/dts/dove-dove-db.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/dove-dove-db.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/dove-dove-db.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/dove.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/dove.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/dove.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/dove.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,158 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+
+	soc@f1000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+
+		ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
+		          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
+		          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
+		          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
+		          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
+		          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
+		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
+		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
+
+		l2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20204 0x04>, <0x20214 0x04>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <7>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <8>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart2: serial@12200 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <9>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart3: serial@12300 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <10>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@d0400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0400 0x20>;
+			ngpio = <32>;
+			interrupts = <12>, <13>, <14>, <60>;
+		};
+
+		gpio1: gpio@d0420 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0420 0x20>;
+			ngpio = <32>;
+			interrupts = <61>;
+		};
+
+		gpio2: gpio@e8400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe8400 0x0c>;
+			ngpio = <8>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <6>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		spi1: spi@14600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <5>;
+			reg = <0x14600 0x28>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clock-frequency = <400000>;
+			timeout-ms = <1000>;
+			status = "disabled";
+		};
+
+		sdio0: sdio@92000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x92000 0x100>;
+			interrupts = <35>, <37>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@90000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x90000 0x100>;
+			interrupts = <36>, <38>;
+			status = "disabled";
+		};
+
+		sata0: sata@a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xa0000 0x2400>;
+			interrupts = <62>;
+			nr-ports = <1>;
+			status = "disabled";
+		};
+
+		crypto: crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xc8000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <31>;
+			status = "okay";
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/ea3250.dts linux-libre-3.7-gnu/arch/arm/boot/dts/ea3250.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/ea3250.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/ea3250.dts	2012-12-10 22:30:57.000000000 -0500
@@ -166,9 +166,116 @@
 		#size-cells = <0>;
 		autorepeat;
 		button@21 {
-			label = "GPIO Key UP";
+			label = "Interrupt Key";
 			linux,code = <103>;
 			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
 		};
+		key1 {
+			label = "KEY1";
+			linux,code = <1>;
+			gpios = <&pca9532 0 0>;
+		};
+		key2 {
+			label = "KEY2";
+			linux,code = <2>;
+			gpios = <&pca9532 1 0>;
+		};
+		key3 {
+			label = "KEY3";
+			linux,code = <3>;
+			gpios = <&pca9532 2 0>;
+		};
+		key4 {
+			label = "KEY4";
+			linux,code = <4>;
+			gpios = <&pca9532 3 0>;
+		};
+		joy0 {
+			label = "Joystick Key 0";
+			linux,code = <10>;
+			gpios = <&gpio 2 0 0>; /* P2.0 */
+		};
+		joy1 {
+			label = "Joystick Key 1";
+			linux,code = <11>;
+			gpios = <&gpio 2 1 0>; /* P2.1 */
+		};
+		joy2 {
+			label = "Joystick Key 2";
+			linux,code = <12>;
+			gpios = <&gpio 2 2 0>; /* P2.2 */
+		};
+		joy3 {
+			label = "Joystick Key 3";
+			linux,code = <13>;
+			gpios = <&gpio 2 3 0>; /* P2.3 */
+		};
+		joy4 {
+			label = "Joystick Key 4";
+			linux,code = <14>;
+			gpios = <&gpio 2 4 0>; /* P2.4 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* LEDs on OEM Board */
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio 2 10 1>; /* P2.10, active low */
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio 2 11 1>; /* P2.11, active low */
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio 2 12 1>; /* P2.12, active low */
+			default-state = "off";
+		};
+
+		/* LEDs on Base Board */
+
+		lede1 {
+			gpios = <&pca9532 8 0>;
+			default-state = "off";
+		};
+		lede2 {
+			gpios = <&pca9532 9 0>;
+			default-state = "off";
+		};
+		lede3 {
+			gpios = <&pca9532 10 0>;
+			default-state = "off";
+		};
+		lede4 {
+			gpios = <&pca9532 11 0>;
+			default-state = "off";
+		};
+		lede5 {
+			gpios = <&pca9532 12 0>;
+			default-state = "off";
+		};
+		lede6 {
+			gpios = <&pca9532 13 0>;
+			default-state = "off";
+		};
+		lede7 {
+			gpios = <&pca9532 14 0>;
+			default-state = "off";
+		};
+		lede8 {
+			gpios = <&pca9532 15 0>;
+			default-state = "off";
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/elpida_ecb240abacn.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/elpida_ecb240abacn.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/elpida_ecb240abacn.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+	elpida_ECB240ABACN: lpddr2 {
+		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		density		= <2048>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <400000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <200000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <10000>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -19,199 +19,60 @@
  * published by the Free Software Foundation.
 */
 
-/include/ "skeleton.dtsi"
+/include/ "exynos4.dtsi"
+/include/ "exynos4210-pinctrl.dtsi"
 
 / {
 	compatible = "samsung,exynos4210";
-	interrupt-parent = <&gic>;
 
 	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
 	};
 
 	gic:interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
 		cpu-offset = <0x8000>;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};
 
 	combiner:interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0x10440000 0x1000>;
 		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
 			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
 			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};
 
-	watchdog@10060000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
-	};
-
-	rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupts = <0 44 0>, <0 45 0>;
-	};
-
-	keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
-	};
-
-	sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
-	};
-
-	sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
-	};
-
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
-	};
-
-	i2c@13860000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
-	};
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
-	};
-
-	i2c@13880000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
-	};
-
-	i2c@13890000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
-	};
-
-	i2c@138A0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
-	};
-
-	i2c@138B0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
-	};
-
-	i2c@138C0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
-	};
-
-	i2c@138D0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
-	};
-
-	spi_0: spi@13920000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi_1: spi@13930000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 7>; /* preliminary */
-		rx-dma-channel = <&pdma1 6>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi_2: spi@13940000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 9>; /* preliminary */
-		rx-dma-channel = <&pdma0 8>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
-		pdma0: pdma@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+				     <0 32 0>;
 		};
+	};
 
-		pdma1: pdma@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
-		};
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x03860000 0x1000>;
 	};
 
 	gpio-controllers {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-origen.dts linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-origen.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-origen.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-origen.dts	2012-12-10 22:30:57.000000000 -0500
@@ -40,6 +40,7 @@
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	sdhci@12510000 {
@@ -53,6 +54,7 @@
 			<&gpk0 4 2 3 3>,
 			<&gpk0 5 2 3 3>,
 			<&gpk0 6 2 3 3>;
+		status = "okay";
 	};
 
 	gpio_keys {
@@ -62,88 +64,45 @@
 
 		up {
 			label = "Up";
-			gpios = <&gpx2 0 0 0 2>;
+			gpios = <&gpx2 0 0 0x10000 2>;
 			linux,code = <103>;
+			gpio-key,wakeup;
 		};
 
 		down {
 			label = "Down";
-			gpios = <&gpx2 1 0 0 2>;
+			gpios = <&gpx2 1 0 0x10000 2>;
 			linux,code = <108>;
+			gpio-key,wakeup;
 		};
 
 		back {
 			label = "Back";
-			gpios = <&gpx1 7 0 0 2>;
+			gpios = <&gpx1 7 0 0x10000 2>;
 			linux,code = <158>;
+			gpio-key,wakeup;
 		};
 
 		home {
 			label = "Home";
-			gpios = <&gpx1 6 0 0 2>;
+			gpios = <&gpx1 6 0 0x10000 2>;
 			linux,code = <102>;
+			gpio-key,wakeup;
 		};
 
 		menu {
 			label = "Menu";
-			gpios = <&gpx1 5 0 0 2>;
+			gpios = <&gpx1 5 0 0x10000 2>;
 			linux,code = <139>;
+			gpio-key,wakeup;
 		};
 	};
 
-	keypad@100A0000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13860000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
-	spi_2: spi@13940000 {
-		status = "disabled";
+	leds {
+		compatible = "gpio-leds";
+		status {
+			gpios = <&gpx1 3 0 0x10000 2>;
+			linux,default-trigger = "heartbeat";
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-pinctrl.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-pinctrl.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-pinctrl.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,457 @@
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_a: uart-audio-a {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_b: uart-audio-b {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb-2", "gpb-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb-6", "gpb-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpc1-0", "gpc1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpc1-3", "gpc1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@11000000 {
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_clk: sd4-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_cmd: sd4-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_cd: sd4-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus1: sd4-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus4: sd4-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus8: sd4-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <4>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpk1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpk1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpk1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpk1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpk2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpk2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpk2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpk2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpk3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpk3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpk3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpk3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint0: ext-int0 {
+			samsung,pins = "gpx0-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint8: ext-int8 {
+			samsung,pins = "gpx1-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint15: ext-int15 {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint16: ext-int16 {
+			samsung,pins = "gpx2-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint31: ext-int31 {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm0_bus: pcm0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4";
+			samsung,pin-function = <0x3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts	2012-12-10 22:30:57.000000000 -0500
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
 	sdhci@12530000 {
@@ -40,6 +40,7 @@
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	keypad@100A0000 {
@@ -47,6 +48,7 @@
 		samsung,keypad-num-columns = <8>;
 		linux,keypad-no-autorepeat;
 		linux,keypad-wakeup;
+		status = "okay";
 
 		row-gpios = <&gpx2 0 3 3 0>,
 			    <&gpx2 1 3 3 0>;
@@ -128,6 +130,7 @@
 		samsung,i2c-max-bus-freq = <20000>;
 		gpios = <&gpd1 0 2 3 0>,
 			<&gpd1 1 2 3 0>;
+		status = "okay";
 
 		eeprom@50 {
 			compatible = "samsung,24ad0xd1";
@@ -140,58 +143,11 @@
 		};
 	};
 
-	sdhci@12510000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
 	spi_2: spi@13940000 {
 		gpios = <&gpc1 1 5 3 0>,
 			<&gpc1 3 5 3 0>,
 			<&gpc1 4 5 3 0>;
+		status = "okay";
 
 		w25x80@0 {
 			#address-cells = <1>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-trats.dts linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-trats.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4210-trats.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4210-trats.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,239 @@
+/*
+ * Samsung's Exynos4210 based Trats board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Trats based on Exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210";
+
+	memory {
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000
+			0x60000000 0x10000000
+			0x70000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+	};
+
+	vemmc_reg: voltage-regulator@0 {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 1 0 0>;
+		enable-active-high;
+	};
+
+	sdhci_emmc: sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		broken-voltage;
+		gpios = <&gpk0 0 2 0 3>,
+			<&gpk0 1 2 0 3>,
+			<&gpk0 3 2 2 3>,
+			<&gpk0 4 2 2 3>,
+			<&gpk0 5 2 2 3>,
+			<&gpk0 6 2 2 3>,
+			<&gpk1 3 3 3 3>,
+			<&gpk1 4 3 3 3>,
+			<&gpk1 5 3 3 3>,
+			<&gpk1 6 3 3 3>;
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c@138B0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		gpios = <&gpb 6 3 3 0>,
+			<&gpb 7 3 3 0>;
+		status = "okay";
+
+		max8997_pmic@66 {
+			compatible = "maxim,max8997-pmic";
+
+			reg = <0x66>;
+
+			max8997,pmic-buck1-uses-gpio-dvs;
+			max8997,pmic-buck2-uses-gpio-dvs;
+			max8997,pmic-buck5-uses-gpio-dvs;
+
+			max8997,pmic-ignore-gpiodvs-side-effect;
+			max8997,pmic-buck125-default-dvs-idx = <0>;
+
+			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
+						         <&gpx0 6 1 0 0>,
+							 <&gpl0 0 1 0 0>;
+
+			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+							 <1250000>, <1200000>,
+							 <1150000>, <1100000>,
+							 <1000000>, <950000>;
+
+			max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+							 <950000>,  <900000>,
+							 <1100000>, <1000000>,
+							 <950000>,  <900000>;
+
+			max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			regulators {
+				valive_reg: LDO2 {
+				     regulator-name = "VALIVE_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vusb_reg: LDO3 {
+				     regulator-name = "VUSB_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				};
+
+				vmipi_reg: LDO4 {
+				     regulator-name = "VMIPI_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vpda_reg: LDO6 {
+				     regulator-name = "VCC_1.8V_PDA";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				     regulator-always-on;
+				};
+
+				vcam_reg: LDO7 {
+				     regulator-name = "CAM_ISP_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vusbdac_reg: LDO8 {
+				     regulator-name = "VUSB/VDAC_3.3V_C210";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vccpda_reg: LDO9 {
+				     regulator-name = "VCC_2.8V_PDA";
+				     regulator-min-microvolt = <2800000>;
+				     regulator-max-microvolt = <2800000>;
+				     regulator-always-on;
+				};
+
+				vpll_reg: LDO10 {
+				     regulator-name = "VPLL_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vcclcd_reg: LDO13 {
+				     regulator-name = "VCC_3.3V_LCD";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vlcd_reg: LDO15 {
+				     regulator-name = "VLCD_2.2V";
+				     regulator-min-microvolt = <2200000>;
+				     regulator-max-microvolt = <2200000>;
+				};
+
+				camsensor_reg: LDO16 {
+				     regulator-name = "CAM_SENSOR_IO_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vddq_reg: LDO21 {
+				     regulator-name = "VDDQ_M1M2_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				varm_breg: BUCK1 {
+				     regulator-name = "VARM_1.2V_C210";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1350000>;
+				     regulator-always-on;
+				};
+
+				vint_breg: BUCK2 {
+				     regulator-name = "VINT_1.1V_C210";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				camisp_breg: BUCK4 {
+				     regulator-name = "CAM_ISP_CORE_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				};
+
+				vmem_breg: BUCK5 {
+				     regulator-name = "VMEM_1.2V_C210";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				vccsub_breg: BUCK7 {
+				     regulator-name = "VCC_SUB_2.0V";
+				     regulator-min-microvolt = <2000000>;
+				     regulator-max-microvolt = <2000000>;
+				     regulator-always-on;
+				};
+
+				safe1_sreg: ESAFEOUT1 {
+				     regulator-name = "SAFEOUT1";
+				     regulator-always-on;
+				};
+
+				safe2_sreg: ESAFEOUT2 {
+				     regulator-name = "SAFEOUT2";
+				     regulator-boot-on;
+				};
+			};
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos4.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos4.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,248 @@
+/*
+ * Samsung's Exynos4 SoC series common device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
+ * SoCs from Exynos4 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+	};
+
+	gic:interrupt-controller@10490000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0x10440000 0x1000>;
+	};
+
+	watchdog@10060000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 43 0>;
+		status = "disabled";
+	};
+
+	rtc@10070000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x10070000 0x100>;
+		interrupts = <0 44 0>, <0 45 0>;
+		status = "disabled";
+	};
+
+	keypad@100A0000 {
+		compatible = "samsung,s5pv210-keypad";
+		reg = <0x100A0000 0x100>;
+		interrupts = <0 109 0>;
+		status = "disabled";
+	};
+
+	sdhci@12510000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12510000 0x100>;
+		interrupts = <0 73 0>;
+		status = "disabled";
+	};
+
+	sdhci@12520000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12520000 0x100>;
+		interrupts = <0 74 0>;
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12530000 0x100>;
+		interrupts = <0 75 0>;
+		status = "disabled";
+	};
+
+	sdhci@12540000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12540000 0x100>;
+		interrupts = <0 76 0>;
+		status = "disabled";
+	};
+
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 52 0>;
+		status = "disabled";
+	};
+
+	serial@13810000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13810000 0x100>;
+		interrupts = <0 53 0>;
+		status = "disabled";
+	};
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		status = "disabled";
+	};
+
+	serial@13830000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13830000 0x100>;
+		interrupts = <0 55 0>;
+		status = "disabled";
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13860000 0x100>;
+		interrupts = <0 58 0>;
+		status = "disabled";
+	};
+
+	i2c@13870000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <0 59 0>;
+		status = "disabled";
+	};
+
+	i2c@13880000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13880000 0x100>;
+		interrupts = <0 60 0>;
+		status = "disabled";
+	};
+
+	i2c@13890000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13890000 0x100>;
+		interrupts = <0 61 0>;
+		status = "disabled";
+	};
+
+	i2c@138A0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138A0000 0x100>;
+		interrupts = <0 62 0>;
+		status = "disabled";
+	};
+
+	i2c@138B0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138B0000 0x100>;
+		interrupts = <0 63 0>;
+		status = "disabled";
+	};
+
+	i2c@138C0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138C0000 0x100>;
+		interrupts = <0 64 0>;
+		status = "disabled";
+	};
+
+	i2c@138D0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138D0000 0x100>;
+		interrupts = <0 65 0>;
+		status = "disabled";
+	};
+
+	spi_0: spi@13920000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13920000 0x100>;
+		interrupts = <0 66 0>;
+		tx-dma-channel = <&pdma0 7>; /* preliminary */
+		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi_1: spi@13930000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13930000 0x100>;
+		interrupts = <0 67 0>;
+		tx-dma-channel = <&pdma1 7>; /* preliminary */
+		rx-dma-channel = <&pdma1 6>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi_2: spi@13940000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13940000 0x100>;
+		interrupts = <0 68 0>;
+		tx-dma-channel = <&pdma0 9>; /* preliminary */
+		rx-dma-channel = <&pdma0 8>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <0 35 0>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <0 36 0>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/exynos5250.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos5250.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos5250.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -27,6 +27,10 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		gsc3 = &gsc_3;
 	};
 
 	gic:interrupt-controller@10481000 {
@@ -182,6 +186,38 @@
 		#size-cells = <0>;
 	};
 
+	dwmmc0@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12200000 0x1000>;
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc1@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12210000 0x1000>;
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc2@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12220000 0x1000>;
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc3@12230000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12230000 0x1000>;
+		interrupts = <0 78 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -460,4 +496,28 @@
 			#gpio-cells = <4>;
 		};
 	};
+
+	gsc_0:  gsc@0x13e00000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e00000 0x1000>;
+		interrupts = <0 85 0>;
+	};
+
+	gsc_1:  gsc@0x13e10000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e10000 0x1000>;
+		interrupts = <0 86 0>;
+	};
+
+	gsc_2:  gsc@0x13e20000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e20000 0x1000>;
+		interrupts = <0 87 0>;
+	};
+
+	gsc_3:  gsc@0x13e30000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e30000 0x1000>;
+		interrupts = <0 88 0>;
+	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-3.7-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts	2012-12-10 22:30:57.000000000 -0500
@@ -16,12 +16,19 @@
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
 	compatible = "samsung,smdk5250", "samsung,exynos5250";
 
+	aliases {
+		mshc0 = &dwmmc_0;
+		mshc1 = &dwmmc_1;
+		mshc2 = &dwmmc_2;
+		mshc3 = &dwmmc_3;
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
 	i2c@12C60000 {
@@ -72,6 +79,56 @@
 		status = "disabled";
 	};
 
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
+				<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
+				<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/highbank.dts linux-libre-3.7-gnu/arch/arm/boot/dts/highbank.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/highbank.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/highbank.dts	2012-12-10 22:30:57.000000000 -0500
@@ -121,6 +121,10 @@
 			compatible = "calxeda,hb-ahci";
 			reg = <0xffe08000 0x10000>;
 			interrupts = <0 83 4>;
+			calxeda,port-phys = <&combophy5 0 &combophy0 0
+					     &combophy0 1 &combophy0 2
+					     &combophy0 3>;
+			dma-coherent;
 		};
 
 		sdhci@ffe0e000 {
@@ -306,5 +310,19 @@
 			reg = <0xfff51000 0x1000>;
 			interrupts = <0 80 4  0 81 4  0 82 4>;
 		};
+
+		combophy0: combo-phy@fff58000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff58000 0x1000>;
+			phydev = <5>;
+		};
+
+		combophy5: combo-phy@fff5d000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff5d000 0x1000>;
+			phydev = <31>;
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/hrefv60plus.dts linux-libre-3.7-gnu/arch/arm/boot/dts/hrefv60plus.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/hrefv60plus.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/hrefv60plus.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 0x1>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 0x1>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+		};
+
+		i2c@80128000 {
+			lp5521@0x33 {
+				compatible = "lp5521";
+				reg = <0x33>;
+			};
+
+			lp5521@0x34 {
+				compatible = "lp5521";
+				reg = <0x34>;
+			};
+
+			bh1780@0x29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x33>;
+			};
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx23.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/imx23.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx23.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx23.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -43,7 +43,7 @@
 			ranges;
 
 			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
+				compatible = "fsl,imx23-icoll", "fsl,icoll";
 				interrupt-controller;
 				#interrupt-cells = <1>;
 				reg = <0x80000000 0x2000>;
@@ -52,6 +52,7 @@
 			dma-apbh@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
+				clocks = <&clks 15>;
 			};
 
 			ecc@80008000 {
@@ -67,6 +68,8 @@
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <13>, <56>;
 				interrupt-names = "gpmi-dma", "bch";
+				clocks = <&clks 34>;
+				clock-names = "gpmi_io";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
@@ -74,6 +77,7 @@
 			ssp0: ssp@80010000 {
 				reg = <0x80010000 0x2000>;
 				interrupts = <15 14>;
+				clocks = <&clks 33>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
@@ -140,6 +144,17 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
+						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -183,7 +198,6 @@
 						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 					>;
 					fsl,drive-strength = <1>;
@@ -280,6 +294,7 @@
 			dma-apbx@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
+				clocks = <&clks 16>;
 			};
 
 			dcp@80028000 {
@@ -306,12 +321,14 @@
 				compatible = "fsl,imx23-lcdif";
 				reg = <0x80030000 2000>;
 				interrupts = <46 45>;
+				clocks = <&clks 38>;
 				status = "disabled";
 			};
 
 			ssp1: ssp@80034000 {
 				reg = <0x80034000 0x2000>;
 				interrupts = <2 20>;
+				clocks = <&clks 33>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
@@ -329,9 +346,10 @@
 			reg = <0x80040000 0x40000>;
 			ranges;
 
-			clkctl@80040000 {
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
-				status = "disabled";
+				#clock-cells = <1>;
 			};
 
 			saif0: saif@80042000 {
@@ -383,20 +401,23 @@
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
+				clocks = <&clks 30>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <5>;
 				status = "disabled";
 			};
 
 			timrot@80068000 {
+				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				status = "disabled";
+				interrupts = <28 29 30 31>;
 			};
 
 			auart0: serial@8006c000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <24 25 23>;
+				clocks = <&clks 32>;
 				status = "disabled";
 			};
 
@@ -404,6 +425,7 @@
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <59 60 58>;
+				clocks = <&clks 32>;
 				status = "disabled";
 			};
 
@@ -411,11 +433,15 @@
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x80070000 0x2000>;
 				interrupts = <0>;
+				clocks = <&clks 32>, <&clks 16>;
+				clock-names = "uart", "apb_pclk";
 				status = "disabled";
 			};
 
-			usbphy@8007c000 {
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx23-usbphy";
 				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 41>;
 				status = "disabled";
 			};
 		};
@@ -428,8 +454,12 @@
 		reg = <0x80080000 0x80000>;
 		ranges;
 
-		usbctrl@80080000 {
+		usb0: usb@80080000 {
+			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
 			reg = <0x80080000 0x40000>;
+			interrupts = <11>;
+			fsl,usbphy = <&usbphy0>;
+			clocks = <&clks 40>;
 			status = "disabled";
 		};
 	};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx23-evk.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx23-evk.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx23-evk.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx23-evk.dts	2012-12-10 22:30:57.000000000 -0500
@@ -42,12 +42,13 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
 						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
 						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx23-olinuxino.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx23-olinuxino.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx23-olinuxino.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx23-olinuxino.dts	2012-12-10 22:30:57.000000000 -0500
@@ -31,6 +31,22 @@
 				bus-width = <4>;
 				status = "okay";
 			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
 		};
 
 		apbx@80040000 {
@@ -39,6 +55,47 @@
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+			gpio = <&gpio0 17 0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "green";
+			gpios = <&gpio2 1 0>;
+			linux,default-trigger = "default-on";
 		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx23-stmp378x_devb.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx23-stmp378x_devb.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx23-stmp378x_devb.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx23-stmp378x_devb.dts	2012-12-10 22:30:57.000000000 -0500
@@ -36,7 +36,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx27.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/imx27.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx27.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx27.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -62,7 +62,6 @@
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x4000>;
 				interrupts = <27>;
-				status = "disabled";
 			};
 
 			uart1: serial@1000a000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx27-phytec-phycore.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx27-phytec-phycore.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx27-phytec-phycore.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx27-phytec-phycore.dts	2012-12-10 22:30:57.000000000 -0500
@@ -23,10 +23,6 @@
 	soc {
 		aipi@10000000 { /* aipi */
 
-			wdog@10002000 {
-				status = "okay";
-			};
-
 			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
@@ -49,7 +45,7 @@
 			i2c@1001d000 {
 				clock-frequency = <400000>;
 				status = "okay";
-				at24@4c {
+				at24@52 {
 					compatible = "at,24c32";
 					pagesize = <32>;
 					reg = <0x52>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-apx4devkit.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-apx4devkit.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-apx4devkit.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-apx4devkit.dts	2012-12-10 22:30:57.000000000 -0500
@@ -37,7 +37,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-cfa10049.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-cfa10049.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-cfa10049.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-cfa10049.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi3_pins_cfa10049: spi3-cfa10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
+						0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
+						0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
+						0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+
+			ssp3: ssp@80016000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_pins_cfa10049>;
+				status = "okay";
+
+				gpio5: gpio5@0 {
+					compatible = "fairchild,74hc595";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0>;
+					registers-number = <2>;
+					spi-max-frequency = <100000>;
+				};
+
+				gpio6: gpio6@1 {
+					compatible = "fairchild,74hc595";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <1>;
+					registers-number = <4>;
+					spi-max-frequency = <100000>;
+				};
+
+			};
+		};
+
+		apbx@80040000 {
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx28.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/imx28.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx28.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx28.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -27,6 +27,8 @@
 		serial2 = &auart2;
 		serial3 = &auart3;
 		serial4 = &auart4;
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
 	};
 
 	cpus {
@@ -50,7 +52,7 @@
 			ranges;
 
 			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
+				compatible = "fsl,imx28-icoll", "fsl,icoll";
 				interrupt-controller;
 				#interrupt-cells = <1>;
 				reg = <0x80000000 0x2000>;
@@ -65,6 +67,7 @@
 			dma-apbh@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
+				clocks = <&clks 25>;
 			};
 
 			perfmon@80006000 {
@@ -81,34 +84,48 @@
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <88>, <41>;
 				interrupt-names = "gpmi-dma", "bch";
+				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			ssp0: ssp@80010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80010000 0x2000>;
 				interrupts = <96 82>;
+				clocks = <&clks 46>;
 				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
 
 			ssp1: ssp@80012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80012000 0x2000>;
 				interrupts = <97 83>;
+				clocks = <&clks 47>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80014000 0x2000>;
 				interrupts = <98 84>;
+				clocks = <&clks 48>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			ssp3: ssp@80016000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80016000 0x2000>;
 				interrupts = <99 85>;
+				clocks = <&clks 49>;
 				fsl,ssp-dma-channel = <3>;
 				status = "disabled";
 			};
@@ -410,6 +427,28 @@
 					fsl,pull-up = <1>;
 				};
 
+				i2c0_pins_b: i2c0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
+						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				i2c1_pins_a: i2c1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
+						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -453,6 +492,16 @@
 					fsl,pull-up = <0>;
 				};
 
+				pwm4_pins_a: pwm4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -507,6 +556,49 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
+						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
+						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
+						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				usbphy0_pins_a: usbphy0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				usbphy0_pins_b: usbphy0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				usbphy1_pins_a: usbphy1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
 			};
 
 			digctl@8001c000 {
@@ -523,6 +615,7 @@
 			dma-apbx@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
+				clocks = <&clks 26>;
 			};
 
 			dcp@80028000 {
@@ -551,6 +644,7 @@
 				compatible = "fsl,imx28-lcdif";
 				reg = <0x80030000 0x2000>;
 				interrupts = <38 86>;
+				clocks = <&clks 55>;
 				status = "disabled";
 			};
 
@@ -558,6 +652,8 @@
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 				reg = <0x80032000 0x2000>;
 				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -565,6 +661,8 @@
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 				reg = <0x80034000 0x2000>;
 				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -611,15 +709,17 @@
 			reg = <0x80040000 0x40000>;
 			ranges;
 
-			clkctl@80040000 {
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
-				status = "disabled";
+				#clock-cells = <1>;
 			};
 
 			saif0: saif@80042000 {
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
+				clocks = <&clks 53>;
 				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
@@ -633,12 +733,16 @@
 				compatible = "fsl,imx28-saif";
 				reg = <0x80046000 0x2000>;
 				interrupts = <58 81>;
+				clocks = <&clks 54>;
 				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
 
 			lradc@80050000 {
+				compatible = "fsl,imx28-lradc";
 				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
 				status = "disabled";
 			};
 
@@ -661,6 +765,7 @@
 				reg = <0x80058000 0x2000>;
 				interrupts = <111 68>;
 				clock-frequency = <100000>;
+				fsl,i2c-dma-channel = <6>;
 				status = "disabled";
 			};
 
@@ -671,26 +776,30 @@
 				reg = <0x8005a000 0x2000>;
 				interrupts = <110 69>;
 				clock-frequency = <100000>;
+				fsl,i2c-dma-channel = <7>;
 				status = "disabled";
 			};
 
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <8>;
 				status = "disabled";
 			};
 
 			timrot@80068000 {
+				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				status = "disabled";
+				interrupts = <48 49 50 51>;
 			};
 
 			auart0: serial@8006a000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006a000 0x2000>;
 				interrupts = <112 70 71>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -698,6 +807,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <113 72 73>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -705,6 +815,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <114 74 75>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -712,6 +823,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80070000 0x2000>;
 				interrupts = <115 76 77>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -719,6 +831,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80072000 0x2000>;
 				interrupts = <116 78 79>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -726,18 +839,22 @@
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x80074000 0x1000>;
 				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
 				status = "disabled";
 			};
 
 			usbphy0: usbphy@8007c000 {
 				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
 				status = "disabled";
 			};
 
 			usbphy1: usbphy@8007e000 {
 				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
 				status = "disabled";
 			};
 		};
@@ -754,6 +871,7 @@
 			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80080000 0x10000>;
 			interrupts = <93>;
+			clocks = <&clks 60>;
 			fsl,usbphy = <&usbphy0>;
 			status = "disabled";
 		};
@@ -762,6 +880,7 @@
 			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80090000 0x10000>;
 			interrupts = <92>;
+			clocks = <&clks 61>;
 			fsl,usbphy = <&usbphy1>;
 			status = "disabled";
 		};
@@ -775,6 +894,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f0000 0x4000>;
 			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "disabled";
 		};
 
@@ -782,6 +903,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f4000 0x4000>;
 			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "disabled";
 		};
 
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-evk.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-evk.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-evk.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-evk.dts	2012-12-10 22:30:57.000000000 -0500
@@ -46,11 +46,28 @@
 				wp-gpios = <&gpio0 28 0>;
 			};
 
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "sst,sst25vf016b";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
 			pinctrl@80018000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
@@ -128,6 +145,10 @@
 				status = "okay";
 			};
 
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
@@ -140,6 +161,12 @@
 					VDDIO-supply = <&reg_3p3v>;
 
 				};
+
+				at24@51 {
+					compatible = "at24,24c32";
+					pagesize = <32>;
+					reg = <0x51>;
+				};
 			};
 
 			pwm: pwm@80064000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-m28evk.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-m28evk.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-m28evk.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-m28evk.dts	2012-12-10 22:30:57.000000000 -0500
@@ -23,6 +23,8 @@
 	apb@80000000 {
 		apbh@80000000 {
 			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
 				status = "okay";
@@ -61,19 +63,40 @@
 					     &mmc0_cd_cfg
 					     &mmc0_sck_cfg>;
 				bus-width = <8>;
-				wp-gpios = <&gpio3 10 1>;
+				wp-gpios = <&gpio3 10 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
 				status = "okay";
 			};
 
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p80";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
 			pinctrl@80018000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
+						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
 						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
 						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -129,6 +152,7 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
+				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -151,32 +175,51 @@
 				};
 			};
 
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
 
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
+			usbphy0: usbphy@8007c000 {
 				status = "okay";
 			};
 
-			auart3: serial@80070000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
+				pinctrl-0 = <&auart0_2pins_a>;
 				status = "okay";
 			};
 		};
 	};
 
 	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy0_pins_a>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy1_pins_a>;
+			status = "okay";
+		};
+
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio3 11 0>;
 			status = "okay";
 		};
 
@@ -198,6 +241,30 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 12 0>;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 13 0>;
+		};
 	};
 
 	sound {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-tx28.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-tx28.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx28-tx28.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx28-tx28.dts	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
@@ -34,6 +34,24 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				mac0_pins_gpio: mac0-gpio-mode@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
+						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
+						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
+						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
+						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
+						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
+						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
+						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
+						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
 			};
 		};
 
@@ -72,8 +90,9 @@
 	ahb@80080000 {
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
-			pinctrl-names = "default";
+			pinctrl-names = "default", "gpio_mode";
 			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-1 = <&mac0_pins_gpio>;
 			status = "okay";
 		};
 	};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx51-babbage.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx51-babbage.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx51-babbage.dts	2012-09-30 20:51:27.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx51-babbage.dts	2012-12-10 22:30:57.000000000 -0500
@@ -25,23 +25,31 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					fsl,cd-controller;
 					fsl,wp-controller;
 					status = "okay";
 				};
 
 				esdhc@70008000 { /* ESDHC2 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc2_1>;
 					cd-gpios = <&gpio1 6 0>;
 					wp-gpios = <&gpio1 5 0>;
 					status = "okay";
 				};
 
 				uart3: serial@7000c000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart3_1>;
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
 
 				ecspi@70010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
 					status = "okay";
@@ -169,31 +177,43 @@
 				};
 			};
 
-			wdog@73f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@73fa8000 {
-				compatible = "fsl,imx51-iomuxc-babbage";
-				reg = <0x73fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							694  0x20d5	/* MX51_PAD_GPIO1_0__SD1_CD */
+							697  0x20d5	/* MX51_PAD_GPIO1_1__SD1_WP */
+							737  0x100	/* MX51_PAD_GPIO1_5__GPIO1_5 */
+							740  0x100	/* MX51_PAD_GPIO1_6__GPIO1_6 */
+							121  0x5	/* MX51_PAD_EIM_A27__GPIO2_21 */
+							402  0x85	/* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+							405  0x85	/* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@73fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
 			uart2: serial@73fc0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_1>;
 				status = "okay";
 			};
 		};
 
 		aips@80000000 {	/* aips-2 */
-			sdma@83fb0000 {
-				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
-			};
-
 			i2c@83fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -206,10 +226,14 @@
 			};
 
 			audmux@83fd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 				status = "okay";
 			};
 
 			ethernet@83fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "mii";
 				status = "okay";
 			};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx51.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/imx51.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx51.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx51.dtsi	2012-12-10 22:51:06.000000000 -0500
@@ -130,6 +130,34 @@
 				};
 			};
 
+			usb@73f80000 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80000 0x0200>;
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			usb@73f80200 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80200 0x0200>;
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			usb@73f80400 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80400 0x0200>;
+				interrupts = <16>;
+				status = "disabled";
+			};
+
+			usb@73f80600 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80600 0x0200>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@73f84000 {
 				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f84000 0x4000>;
@@ -174,7 +202,6 @@
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
-				status = "disabled";
 			};
 
 			wdog@73f9c000 { /* WDOG2 */
@@ -184,6 +211,122 @@
 				status = "disabled";
 			};
 
+			iomuxc@73fa8000 {
+				compatible = "fsl,imx51-iomuxc";
+				reg = <0x73fa8000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmuxgrp-1 {
+						fsl,pins = <
+							384 0x80000000	/* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+							386 0x80000000	/* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+							389 0x80000000	/* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+							391 0x80000000	/* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+						>;
+					};
+				};
+
+				fec {
+					pinctrl_fec_1: fecgrp-1 {
+						fsl,pins = <
+							128 0x80000000	/* MX51_PAD_EIM_EB2__FEC_MDIO */
+							134 0x80000000	/* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+							146 0x80000000	/* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+							152 0x80000000	/* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+							158 0x80000000	/* MX51_PAD_EIM_CS4__FEC_RX_ER */
+							165 0x80000000	/* MX51_PAD_EIM_CS5__FEC_CRS */
+							206 0x80000000	/* MX51_PAD_NANDF_RB2__FEC_COL */
+							213 0x80000000	/* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+							293 0x80000000	/* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+							298 0x80000000	/* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+							225 0x80000000	/* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+							231 0x80000000	/* MX51_PAD_NANDF_CS3__FEC_MDC */
+							237 0x80000000	/* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+							243 0x80000000	/* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+							250 0x80000000	/* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+							255 0x80000000	/* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+							260 0x80000000	/* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							398 0x185	/* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+							394 0x185	/* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+							409 0x185	/* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp-1 {
+						fsl,pins = <
+							666 0x400020d5	/* MX51_PAD_SD1_CMD__SD1_CMD */
+							669 0x20d5	/* MX51_PAD_SD1_CLK__SD1_CLK */
+							672 0x20d5	/* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+							678 0x20d5	/* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+							684 0x20d5	/* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+							691 0x20d5	/* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+						>;
+					};
+				};
+
+				esdhc2 {
+					pinctrl_esdhc2_1: esdhc2grp-1 {
+						fsl,pins = <
+							704 0x400020d5	/* MX51_PAD_SD2_CMD__SD2_CMD */
+							707 0x20d5	/* MX51_PAD_SD2_CLK__SD2_CLK */
+							710 0x20d5	/* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+							712 0x20d5	/* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+							715 0x20d5	/* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+							719 0x20d5	/* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							449 0x400001ed	/* MX51_PAD_KEY_COL4__I2C2_SCL */
+							454 0x400001ed	/* MX51_PAD_KEY_COL5__I2C2_SDA */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							413 0x1c5	/* MX51_PAD_UART1_RXD__UART1_RXD */
+							416 0x1c5	/* MX51_PAD_UART1_TXD__UART1_TXD */
+							418 0x1c5	/* MX51_PAD_UART1_RTS__UART1_RTS */
+							420 0x1c5	/* MX51_PAD_UART1_CTS__UART1_CTS */
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							423 0x1c5	/* MX51_PAD_UART2_RXD__UART2_RXD */
+							426 0x1c5	/* MX51_PAD_UART2_TXD__UART2_TXD */
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							54 0x1c5	/* MX51_PAD_EIM_D25__UART3_RXD */
+							59 0x1c5	/* MX51_PAD_EIM_D26__UART3_TXD */
+							65 0x1c5	/* MX51_PAD_EIM_D27__UART3_RTS */
+							49 0x1c5	/* MX51_PAD_EIM_D24__UART3_CTS */
+						>;
+					};
+				};
+			};
+
 			uart1: serial@73fbc000 {
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fbc000 0x4000>;
@@ -219,6 +362,7 @@
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
+				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
 			};
 
 			cspi@83fc0000 {
@@ -263,6 +407,13 @@
 				status = "disabled";
 			};
 
+			nand@83fdb000 {
+				compatible = "fsl,imx51-nand";
+				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
+				interrupts = <8>;
+				status = "disabled";
+			};
+
 			ssi3: ssi@83fe8000 {
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fe8000 0x4000>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-ard.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-ard.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-ard.dts	2012-09-30 20:51:29.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-ard.dts	2012-12-10 22:30:57.000000000 -0500
@@ -25,31 +25,66 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_2>;
 					cd-gpios = <&gpio1 1 0>;
 					wp-gpios = <&gpio1 9 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-ard";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1077 0x80000000	/* MX53_PAD_GPIO_1__GPIO1_1 */
+							1085 0x80000000	/* MX53_PAD_GPIO_9__GPIO1_9 */
+							486  0x80000000	/* MX53_PAD_EIM_EB3__GPIO2_31 */
+							739  0x80000000	/* MX53_PAD_GPIO_10__GPIO4_0 */
+							218  0x80000000	/* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+							226  0x80000000	/* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+							233  0x80000000	/* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+							241  0x80000000	/* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+							429  0x80000000	/* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+							435  0x80000000	/* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+							441  0x80000000	/* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+							448  0x80000000	/* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+							456  0x80000000	/* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+							464  0x80000000	/* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+							471  0x80000000	/* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+							477  0x80000000	/* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+							492  0x80000000	/* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+							500  0x80000000	/* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+							508  0x80000000	/* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+							516  0x80000000	/* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+							524  0x80000000	/* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+							532  0x80000000	/* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+							540  0x80000000	/* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+							548  0x80000000	/* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+							637  0x80000000	/* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+							642  0x80000000	/* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+							647  0x80000000	/* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+							652  0x80000000	/* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+							657  0x80000000	/* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+							662  0x80000000	/* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+							667  0x80000000	/* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+							611  0x80000000	/* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+							616  0x80000000	/* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+							607  0x80000000	/* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_2>;
 				status = "okay";
 			};
 		};
-
-		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
-			};
-		};
 	};
 
 	eim-cs1@f4000000 {
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx53.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/imx53.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx53.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx53.dtsi	2012-12-10 22:51:08.000000000 -0500
@@ -135,6 +135,34 @@
 				};
 			};
 
+			usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			usb@53f80200 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				status = "disabled";
+			};
+
+			usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@53f84000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;
@@ -179,7 +207,6 @@
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
-				status = "disabled";
 			};
 
 			wdog@53f9c000 { /* WDOG2 */
@@ -189,6 +216,161 @@
 				status = "disabled";
 			};
 
+			iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmuxgrp-1 {
+						fsl,pins = <
+							10 0x80000000	/* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
+							17 0x80000000	/* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
+							23 0x80000000	/* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
+							30 0x80000000	/* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
+						>;
+					};
+				};
+
+				fec {
+					pinctrl_fec_1: fecgrp-1 {
+						fsl,pins = <
+							820 0x80000000	/* MX53_PAD_FEC_MDC__FEC_MDC */
+							779 0x80000000	/* MX53_PAD_FEC_MDIO__FEC_MDIO */
+							786 0x80000000	/* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
+							791 0x80000000	/* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
+							796 0x80000000	/* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
+							799 0x80000000	/* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
+							804 0x80000000	/* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
+							808 0x80000000	/* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
+							811 0x80000000	/* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
+							816 0x80000000	/* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							433 0x80000000	/* MX53_PAD_EIM_D16__ECSPI1_SCLK */
+							439 0x80000000	/* MX53_PAD_EIM_D17__ECSPI1_MISO */
+							445 0x80000000	/* MX53_PAD_EIM_D18__ECSPI1_MOSI */
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp-1 {
+						fsl,pins = <
+							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+						>;
+					};
+
+					pinctrl_esdhc1_2: esdhc1grp-2 {
+						fsl,pins = <
+							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+							941  0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
+							948  0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
+							955  0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
+							962  0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
+							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+						>;
+					};
+				};
+
+				esdhc2 {
+					pinctrl_esdhc2_1: esdhc2grp-1 {
+						fsl,pins = <
+							1038 0x1d5	/* MX53_PAD_SD2_CMD__ESDHC2_CMD */
+							1032 0x1d5	/* MX53_PAD_SD2_CLK__ESDHC2_CLK */
+							1062 0x1d5	/* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
+							1056 0x1d5	/* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
+							1050 0x1d5	/* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
+							1044 0x1d5	/* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
+						>;
+					};
+				};
+
+				esdhc3 {
+					pinctrl_esdhc3_1: esdhc3grp-1 {
+						fsl,pins = <
+							943 0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
+							950 0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
+							957 0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
+							964 0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
+							893 0x1d5	/* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
+							900 0x1d5	/* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
+							906 0x1d5	/* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
+							912 0x1d5	/* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
+							857 0x1d5	/* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
+							863 0x1d5	/* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
+						>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <
+							333 0xc0000000	/* MX53_PAD_CSI0_DAT8__I2C1_SDA */
+							341 0xc0000000	/* MX53_PAD_CSI0_DAT9__I2C1_SCL */
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							61 0xc0000000	/* MX53_PAD_KEY_ROW3__I2C2_SDA */
+							53 0xc0000000	/* MX53_PAD_KEY_COL3__I2C2_SCL */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							346 0x1c5	/* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
+							354 0x1c5	/* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
+						>;
+					};
+
+					pinctrl_uart1_2: uart1grp-2 {
+						fsl,pins = <
+							828 0x1c5	/* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
+							832 0x1c5	/* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							841 0x1c5	/* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
+							836 0x1c5	/* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							884 0x1c5	/* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+							888 0x1c5	/* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+							875 0x1c5	/* MX53_PAD_PATA_DA_1__UART3_CTS */
+							880 0x1c5	/* MX53_PAD_PATA_DA_2__UART3_RTS */
+						>;
+					};
+				};
+			};
+
 			uart1: serial@53fbc000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53fbc000 0x4000>;
@@ -203,6 +385,20 @@
 				status = "disabled";
 			};
 
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				status = "disabled";
+			};
+
 			gpio5: gpio@53fdc000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53fdc000 0x4000>;
@@ -277,6 +473,7 @@
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
+				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
 			};
 
 			cspi@63fc0000 {
@@ -321,6 +518,13 @@
 				status = "disabled";
 			};
 
+			nand@63fdb000 {
+				compatible = "fsl,imx53-nand";
+				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+				interrupts = <8>;
+				status = "disabled";
+			};
+
 			ssi3: ssi@63fe8000 {
 				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
 				reg = <0x63fe8000 0x4000>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-evk.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-evk.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-evk.dts	2012-09-30 20:51:31.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-evk.dts	2012-12-10 22:30:57.000000000 -0500
@@ -25,12 +25,16 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					wp-gpios = <&gpio3 14 0>;
 					status = "okay";
 				};
 
 				ecspi@50010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 					status = "okay";
@@ -56,32 +60,45 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-evk";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							705  0x80000000	/* MX53_PAD_EIM_DA14__GPIO3_14 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				pmic: mc13892@08 {
@@ -96,6 +113,8 @@
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-qsb.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-qsb.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-qsb.dts	2012-09-30 20:51:33.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-qsb.dts	2012-12-10 22:30:57.000000000 -0500
@@ -25,6 +25,8 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					status = "okay";
 				};
@@ -35,32 +37,46 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-qsb";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1071 0x80000000	/* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+							1141 0x80000000	/* MX53_PAD_GPIO_8__GPIO1_8 */
+							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -72,6 +88,8 @@
 			};
 
 			i2c@63fc8000 { /* I2C1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 				status = "okay";
 
 				accelerometer: mma8450@1c {
@@ -158,10 +176,14 @@
 			};
 
 			audmux@63fd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 				status = "okay";
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-smd.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-smd.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx53-smd.dts	2012-09-30 20:51:35.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx53-smd.dts	2012-12-10 22:30:57.000000000 -0500
@@ -25,22 +25,30 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					wp-gpios = <&gpio4 11 0>;
 					status = "okay";
 				};
 
 				esdhc@50008000 { /* ESDHC2 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc2_1>;
 					non-removable;
 					status = "okay";
 				};
 
 				uart3: serial@5000c000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart3_1>;
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
 
 				ecspi@50010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 					status = "okay";
@@ -72,35 +80,49 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					non-removable;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-smd";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+							43   0x80000000	/* MX53_PAD_KEY_ROW2__GPIO4_11 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 
 			uart2: serial@53fc0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				codec: sgtl5000@0a {
@@ -120,6 +142,8 @@
 			};
 
 			i2c@63fc8000 { /* I2C1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 				status = "okay";
 
 				accelerometer: mma8450@1c {
@@ -139,6 +163,8 @@
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q-arm2.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q-arm2.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q-arm2.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q-arm2.dts	2012-12-10 22:30:57.000000000 -0500
@@ -28,8 +28,34 @@
 			status = "disabled"; /* gpmi nand conflicts with SD */
 		};
 
+		aips-bus@02000000 { /* AIPS1 */
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+						>;
+					};
+				};
+
+				arm2 {
+					pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+						fsl,pins = <
+							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+						>;
+					};
+				};
+			};
+		};
+
 		aips-bus@02100000 { /* AIPS2 */
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_2>;
 				phy-mode = "rgmii";
 				status = "okay";
 			};
@@ -39,7 +65,8 @@
 				wp-gpios = <&gpio6 14 0>;
 				vmmc-supply = <&reg_3p3v>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
+				pinctrl-0 = <&pinctrl_usdhc3_1
+					     &pinctrl_usdhc3_arm2>;
 				status = "okay";
 			};
 
@@ -52,6 +79,8 @@
 			};
 
 			uart4: serial@021f0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4_1>;
 				status = "okay";
 			};
 		};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q.dtsi	2012-12-10 22:51:10.000000000 -0500
@@ -97,18 +97,23 @@
 		dma-apbh@00110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
+			clocks = <&clks 106>;
 		};
 
 		gpmi-nand@00112000 {
-		       compatible = "fsl,imx6q-gpmi-nand";
-		       #address-cells = <1>;
-		       #size-cells = <1>;
-		       reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-		       reg-names = "gpmi-nand", "bch";
-		       interrupts = <0 13 0x04>, <0 15 0x04>;
-		       interrupt-names = "gpmi-dma", "bch";
-		       fsl,gpmi-dma-channel = <0>;
-		       status = "disabled";
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 13 0x04>, <0 15 0x04>;
+			interrupt-names = "gpmi-dma", "bch";
+			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+				 <&clks 150>, <&clks 149>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			fsl,gpmi-dma-channel = <0>;
+			status = "disabled";
 		};
 
 		timer@00a00600 {
@@ -150,6 +155,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <0 31 0x04>;
+					clocks = <&clks 112>, <&clks 112>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -159,6 +166,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <0 32 0x04>;
+					clocks = <&clks 113>, <&clks 113>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -168,6 +177,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <0 33 0x04>;
+					clocks = <&clks 114>, <&clks 114>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -177,6 +188,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <0 34 0x04>;
+					clocks = <&clks 115>, <&clks 115>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -186,6 +199,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 35 0x04>;
+					clocks = <&clks 116>, <&clks 116>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -193,6 +208,8 @@
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 0x04>;
+					clocks = <&clks 160>, <&clks 161>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -205,6 +222,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
+					clocks = <&clks 178>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <38 37>;
 					status = "disabled";
@@ -214,6 +232,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
+					clocks = <&clks 179>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <42 41>;
 					status = "disabled";
@@ -223,6 +242,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
+					clocks = <&clks 180>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <46 45>;
 					status = "disabled";
@@ -362,24 +382,26 @@
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 0x04>;
-				status = "disabled";
+				clocks = <&clks 0>;
 			};
 
 			wdog@020c0000 { /* WDOG2 */
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 0x04>;
+				clocks = <&clks 0>;
 				status = "disabled";
 			};
 
-			ccm@020c4000 {
+			clks: ccm@020c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 0x04 0 88 0x04>;
+				#clock-cells = <1>;
 			};
 
-			anatop@020c8000 {
-				compatible = "fsl,imx6q-anatop";
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 
@@ -472,12 +494,14 @@
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
+				clocks = <&clks 182>;
 			};
 
 			usbphy2: usbphy@020ca000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
+				clocks = <&clks 183>;
 			};
 
 			snvs@020cc000 {
@@ -507,6 +531,11 @@
 				interrupts = <0 89 0x04 0 90 0x04>;
 			};
 
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
 			iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
@@ -514,86 +543,207 @@
 				/* shared pinctrl settings */
 				audmux {
 					pinctrl_audmux_1: audmux-1 {
-						fsl,pins = <18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
-							    1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
-							    11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
-							    3    0x80000000>;	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+						fsl,pins = <
+							18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+							1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+							11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+							3    0x80000000	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							101 0x100b1	/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+							109 0x100b1	/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+							94  0x100b1	/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+						>;
+					};
+				};
+
+				enet {
+					pinctrl_enet_1: enetgrp-1 {
+						fsl,pins = <
+							695 0x1b0b0	/* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
+							756 0x1b0b0	/* MX6Q_PAD_ENET_MDC__ENET_MDC */
+							24  0x1b0b0	/* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+							30  0x1b0b0	/* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+							34  0x1b0b0	/* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+							39  0x1b0b0	/* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+							44  0x1b0b0	/* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+							56  0x1b0b0	/* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+							702 0x1b0b0	/* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+							74  0x1b0b0	/* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+							52  0x1b0b0	/* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+							61  0x1b0b0	/* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+							66  0x1b0b0	/* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+							70  0x1b0b0	/* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+							48  0x1b0b0	/* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+						>;
+					};
+
+					pinctrl_enet_2: enetgrp-2 {
+						fsl,pins = <
+							890 0x1b0b0	/* MX6Q_PAD_KEY_COL1__ENET_MDIO */
+							909 0x1b0b0	/* MX6Q_PAD_KEY_COL2__ENET_MDC */
+							24  0x1b0b0	/* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+							30  0x1b0b0	/* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+							34  0x1b0b0	/* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+							39  0x1b0b0	/* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+							44  0x1b0b0	/* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+							56  0x1b0b0	/* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+							702 0x1b0b0	/* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+							74  0x1b0b0	/* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+							52  0x1b0b0	/* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+							61  0x1b0b0	/* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+							66  0x1b0b0	/* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+							70  0x1b0b0	/* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+							48  0x1b0b0	/* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+						>;
 					};
 				};
 
 				gpmi-nand {
 					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <1328 0xb0b1		/* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
-							    1336 0xb0b1		/* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
-							    1344 0xb0b1		/* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
-							    1352 0xb000		/* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
-							    1360 0xb0b1		/* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
-							    1365 0xb0b1		/* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
-							    1371 0xb0b1		/* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
-							    1378 0xb0b1		/* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
-							    1387 0xb0b1		/* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
-							    1393 0xb0b1		/* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
-							    1397 0xb0b1		/* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
-							    1405 0xb0b1		/* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
-							    1413 0xb0b1		/* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
-							    1421 0xb0b1		/* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
-							    1429 0xb0b1		/* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
-							    1437 0xb0b1		/* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
-							    1445 0xb0b1		/* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
-							    1453 0xb0b1		/* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
-							    1463 0x00b1>;	/* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+						fsl,pins = <
+							1328 0xb0b1	/* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+							1336 0xb0b1	/* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+							1344 0xb0b1	/* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+							1352 0xb000	/* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+							1360 0xb0b1	/* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+							1365 0xb0b1	/* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+							1371 0xb0b1	/* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+							1378 0xb0b1	/* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+							1387 0xb0b1	/* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+							1393 0xb0b1	/* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+							1397 0xb0b1	/* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+							1405 0xb0b1	/* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+							1413 0xb0b1	/* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+							1421 0xb0b1	/* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+							1429 0xb0b1	/* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+							1437 0xb0b1	/* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+							1445 0xb0b1	/* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+							1453 0xb0b1	/* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+							1463 0x00b1	/* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+						>;
 					};
 				};
 
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
-						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
-							    196 0x4001b8b1>;	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+						fsl,pins = <
+							137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
+							196 0x4001b8b1	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+						>;
 					};
 				};
 
-				serial2 {
-					pinctrl_serial2_1: serial2grp-1 {
-						fsl,pins = <183 0x1b0b1		/* MX6Q_PAD_EIM_D26__UART2_TXD */
-							    191 0x1b0b1>;	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							1140 0x1b0b1	/* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
+							1148 0x1b0b1	/* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							183 0x1b0b1	/* MX6Q_PAD_EIM_D26__UART2_TXD */
+							191 0x1b0b1	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+						>;
+					};
+				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							877 0x1b0b1	/* MX6Q_PAD_KEY_COL0__UART4_TXD */
+							885 0x1b0b1	/* MX6Q_PAD_KEY_ROW0__UART4_RXD */
+						>;
+					};
+				};
+
+				usbotg {
+					pinctrl_usbotg_1: usbotggrp-1 {
+						fsl,pins = <
+							1592 0x17059	/* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
+						>;
+					};
+				};
+
+				usdhc2 {
+					pinctrl_usdhc2_1: usdhc2grp-1 {
+						fsl,pins = <
+							1577 0x17059	/* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
+							1569 0x10059	/* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
+							16   0x17059	/* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
+							0    0x17059	/* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
+							8    0x17059	/* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
+							1583 0x17059	/* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
+							1430 0x17059	/* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
+							1438 0x17059	/* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
+							1446 0x17059	/* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
+							1454 0x17059	/* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
+						>;
 					};
 				};
 
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-							    1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
-							    1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
-							    1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
-							    1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
-							    1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
-							    1265 0x17059	/* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
-							    1257 0x17059	/* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
-							    1249 0x17059	/* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
-							    1241 0x17059>;	/* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+						fsl,pins = <
+							1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+							1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
+							1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+							1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+							1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+							1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+							1265 0x17059	/* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+							1257 0x17059	/* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+							1249 0x17059	/* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+							1241 0x17059	/* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+						>;
+					};
+
+					pinctrl_usdhc3_2: usdhc3grp-2 {
+						fsl,pins = <
+							1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+							1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
+							1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+							1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+							1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+							1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+						>;
 					};
 				};
 
 				usdhc4 {
 					pinctrl_usdhc4_1: usdhc4grp-1 {
-						fsl,pins = <1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
-							    1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
-							    1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
-							    1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
-							    1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
-							    1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
-							    1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
-							    1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
-							    1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
-							    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+						fsl,pins = <
+							1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+							1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+							1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+							1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+							1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+							1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+							1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+							1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+							1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+							1517 0x17059	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+						>;
 					};
-				};
 
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <101 0x100b1		/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
-							    109 0x100b1		/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
-							    94  0x100b1>;	/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+					pinctrl_usdhc4_2: usdhc4grp-2 {
+						fsl,pins = <
+							1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+							1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+							1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+							1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+							1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+							1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+						>;
 					};
 				};
 			};
@@ -612,6 +762,9 @@
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 0x04>;
+				clocks = <&clks 155>, <&clks 155>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
 			};
 		};
 
@@ -635,7 +788,9 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 0x04>;
+				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
 
@@ -643,7 +798,9 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 0x04>;
+				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
 
@@ -651,6 +808,8 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
 
@@ -658,13 +817,24 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
 
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks 162>;
+			};
+
 			ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
+				clocks = <&clks 117>, <&clks 117>;
+				clock-names = "ipg", "ahb";
 				status = "disabled";
 			};
 
@@ -677,6 +847,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 0x04>;
+				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -684,6 +856,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 0x04>;
+				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -691,6 +865,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 0x04>;
+				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -698,6 +874,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 0x04>;
+				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -707,6 +885,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <0 36 0x04>;
+				clocks = <&clks 125>;
 				status = "disabled";
 			};
 
@@ -716,6 +895,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a4000 0x4000>;
 				interrupts = <0 37 0x04>;
+				clocks = <&clks 126>;
 				status = "disabled";
 			};
 
@@ -725,6 +905,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a8000 0x4000>;
 				interrupts = <0 38 0x04>;
+				clocks = <&clks 127>;
 				status = "disabled";
 			};
 
@@ -788,6 +969,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
 				interrupts = <0 27 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -795,6 +978,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
 				interrupts = <0 28 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -802,6 +987,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
 				interrupts = <0 29 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -809,6 +996,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
 				interrupts = <0 30 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 		};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q-sabrelite.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q-sabrelite.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q-sabrelite.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q-sabrelite.dts	2012-12-10 22:30:57.000000000 -0500
@@ -46,15 +46,20 @@
 
 			iomuxc@020e0000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_gpio_hog>;
+				pinctrl-0 = <&pinctrl_hog>;
 
-				gpios {
-					pinctrl_gpio_hog: gpiohog {
+				hog {
+					pinctrl_hog: hoggrp {
 						fsl,pins = <
-							   144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
-							   121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
-							   953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
-							   >;
+							1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+							1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+							121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+							144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+							152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+							1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+							1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+							953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
+						>;
 					};
 				};
 			};
@@ -63,6 +68,9 @@
 		aips-bus@02100000 { /* AIPS2 */
 			usb@02184000 { /* USB OTG */
 				vbus-supply = <&reg_usb_otg_vbus>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usbotg_1>;
+				disable-over-current;
 				status = "okay";
 			};
 
@@ -71,12 +79,16 @@
 			};
 
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_1>;
 				phy-mode = "rgmii";
 				phy-reset-gpios = <&gpio3 23 0>;
 				status = "okay";
 			};
 
 			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_2>;
 				cd-gpios = <&gpio7 0 0>;
 				wp-gpios = <&gpio7 1 0>;
 				vmmc-supply = <&reg_3p3v>;
@@ -84,6 +96,8 @@
 			};
 
 			usdhc@0219c000 { /* uSDHC4 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc4_2>;
 				cd-gpios = <&gpio2 6 0>;
 				wp-gpios = <&gpio2 7 0>;
 				vmmc-supply = <&reg_3p3v>;
@@ -99,7 +113,7 @@
 			uart2: serial@021e8000 {
 				status = "okay";
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_serial2_1>;
+				pinctrl-0 = <&pinctrl_uart2_1>;
 			};
 
 			i2c@021a0000 { /* I2C1 */
@@ -111,6 +125,7 @@
 				codec: sgtl5000@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					clocks = <&clks 169>;
 					VDDA-supply = <&reg_2p5v>;
 					VDDIO-supply = <&reg_3p3v>;
 				};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q-sabresd.dts linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q-sabresd.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/imx6q-sabresd.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/imx6q-sabresd.dts	2012-12-10 22:30:57.000000000 -0500
@@ -22,28 +22,51 @@
 	};
 
 	soc {
-
 		aips-bus@02000000 { /* AIPS1 */
 			spba-bus@02000000 {
 				uart1: serial@02020000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart1_1>;
 					status = "okay";
 				};
 			};
+
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+							1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+						>;
+					};
+				};
+			};
 		};
 
 		aips-bus@02100000 { /* AIPS2 */
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_1>;
 				phy-mode = "rgmii";
 				status = "okay";
 			};
 
 			usdhc@02194000 { /* uSDHC2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc2_1>;
 				cd-gpios = <&gpio2 2 0>;
 				wp-gpios = <&gpio2 3 0>;
 				status = "okay";
 			};
 
 			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_1>;
 				cd-gpios = <&gpio2 0 0>;
 				wp-gpios = <&gpio2 1 0>;
 				status = "okay";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/integratorap.dts linux-libre-3.7-gnu/arch/arm/boot/dts/integratorap.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/integratorap.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/integratorap.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,68 @@
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,integrator-timer";
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,integrator-timer";
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,integrator-timer";
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x003fffff>;
+	};
+
+	fpga {
+		/*
+		 * The Integator/AP predates the idea to have magic numbers
+		 * identifying the PrimeCell in hardware, thus we have to
+		 * supply these from the device tree.
+		 */
+		rtc: rtc@15000000 {
+			compatible = "arm,pl030", "arm,primecell";
+			arm,primecell-periphid = <0x00041030>;
+		};
+
+		uart0: uart@16000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+		};
+
+		uart1: uart@17000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+		};
+
+		kmi0: kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+		};
+
+		kmi1: kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/integratorcp.dts linux-libre-3.7-gnu/arch/arm/boot/dts/integratorcp.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/integratorcp.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/integratorcp.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,110 @@
+/*
+ * Device Tree for the ARM Integrator/CP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/CP";
+	compatible = "arm,integrator-cp";
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,sp804", "arm,primecell";
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,sp804", "arm,primecell";
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,sp804", "arm,primecell";
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x1fc003ff>;
+	};
+
+	cic: cic@10000040 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x10000040 0x100>;
+		clear-mask = <0xffffffff>;
+		valid-mask = <0x00000007>;
+	};
+
+	sic: sic@ca000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0xca000000 0x100>;
+		clear-mask = <0x00000fff>;
+		valid-mask = <0x00000fff>;
+	};
+
+	ethernet@c8000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0xc8000000 0x10>;
+		interrupt-parent = <&pic>;
+		interrupts = <27>;
+	};
+
+	fpga {
+		/*
+		 * These PrimeCells are at the same location and using
+		 * the same interrupts in all Integrators, but in the CP
+		 * slightly newer versions are deployed.
+		 */
+		rtc@15000000 {
+			compatible = "arm,pl031", "arm,primecell";
+		};
+
+		uart@16000000 {
+			compatible = "arm,pl011", "arm,primecell";
+		};
+
+		uart@17000000 {
+			compatible = "arm,pl011", "arm,primecell";
+		};
+
+		kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+		};
+
+		kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+		};
+
+		/*
+		 * These PrimeCells are only available on the Integrator/CP
+		 */
+		mmc@1c000000 {
+			compatible = "arm,pl180", "arm,primecell";
+			reg = <0x1c000000 0x1000>;
+			interrupts = <23 24>;
+			max-frequency = <515633>;
+		};
+
+		aaci@1d000000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x1d000000 0x1000>;
+			interrupts = <25>;
+		};
+
+		clcd@c0000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <22>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/integrator.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/integrator.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/integrator.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/integrator.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,76 @@
+/*
+ * SoC core Device Tree for the ARM Integrator platforms
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	timer@13000000 {
+		reg = <0x13000000 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <5>;
+	};
+
+	timer@13000100 {
+		reg = <0x13000100 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <6>;
+	};
+
+	timer@13000200 {
+		reg = <0x13000200 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <7>;
+	};
+
+	pic@14000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x14000000 0x100>;
+		clear-mask = <0xffffffff>;
+	};
+
+	flash@24000000 {
+		compatible = "cfi-flash";
+		reg = <0x24000000 0x02000000>;
+	};
+
+	fpga {
+		compatible = "arm,amba-bus", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&pic>;
+
+		/*
+		 * These PrimeCells are in the same locations and using the
+		 * same interrupts in all Integrators, however the silicon
+		 * version deployed is different.
+		 */
+		rtc@15000000 {
+			reg = <0x15000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		uart@16000000 {
+			reg = <0x16000000 0x1000>;
+			interrupts = <1>;
+		};
+
+		uart@17000000 {
+			reg = <0x17000000 0x1000>;
+			interrupts = <2>;
+		};
+
+		kmi@18000000 {
+			reg = <0x18000000 0x1000>;
+			interrupts = <3>;
+		};
+
+		kmi@19000000 {
+			reg = <0x19000000 0x1000>;
+			interrupts = <4>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-dnskw.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -25,6 +25,16 @@
 		};
 	};
 
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
 	ocp@f1000000 {
 		sata@80000 {
 			status = "okay";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-dockstar.dts linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-dockstar.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-dockstar.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-dockstar.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -14,7 +14,8 @@
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
+		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -105,5 +106,14 @@
 			clock-frequency = <100000>;
 			status = "disabled";
 		};
+
+		crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xf5000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			status = "okay";
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-iconnect.dts linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-iconnect.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-iconnect.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-iconnect.dts	2012-12-10 22:30:57.000000000 -0500
@@ -12,7 +12,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
 		linux,initrd-start = <0x4500040>;
 		linux,initrd-end   = <0x4800000>;
 	};
@@ -30,7 +30,37 @@
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0xc0000>;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			partition@100000 {
+				label = "zImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@540000 {
+				label = "initrd";
+				reg = <0x540000 0x300000>;
+			};
+
+			partition@980000 {
+				label = "boot";
+				reg = <0x980000 0x1f400000>;
+			};
+		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -69,4 +99,22 @@
 			gpios = <&gpio1 16 0>;
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+			debounce-interval = <100>;
+		};
+	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@400000 {
+				label = "uInitrd";
+				reg = <0x540000 0x1000000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 0>;
+			linux,default-trigger = "default-on";
+		};
+		health_led1 {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 0>;
+		};
+		health_led2 {
+			label = "status:white:health_led";
+			gpios = <&gpio1 4 0>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 0>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		Power {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio0 14 1>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-km_kirkwood.dts linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-km_kirkwood.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-km_kirkwood.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "ok";
+			chip-delay = <25>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -48,17 +48,19 @@
 		#size-cells = <0>;
 		button@1 {
 			label = "Function Button";
-			linux,code = <132>;
+			linux,code = <357>;
 			gpios = <&gpio1 9 1>;
 		};
 		button@2 {
 			label = "Power-on Switch";
-			linux,code = <116>;
+			linux,code = <0>;
+			linux,input-type = <5>;
 			gpios = <&gpio1 10 1>;
 		};
 		button@3 {
 			label = "Power-auto Switch";
-			linux,code = <142>;
+			linux,code = <1>;
+			linux,input-type = <5>;
 			gpios = <&gpio1 11 1>;
 		};
 	};
@@ -67,28 +69,28 @@
 		compatible = "gpio-leds";
 
 		led@1 {
-			label = "lschlv2:blue:func";
+			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 1>;
 		};
 
 		led@2 {
-			label = "lschlv2:red:alarm";
+			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 1>;
 		};
 
 		led@3 {
-			label = "lschlv2:amber:info";
+			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 1>;
 		};
 
 		led@4 {
-			label = "lschlv2:blue:power";
+			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 1>;
 			linux,default-trigger = "default-on";
 		};
 
 		led@5 {
-			label = "lschlv2:red:func";
+			label = "lsxl:red:func";
 			gpios = <&gpio1 16 1>;
 		};
 	};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/Makefile linux-libre-3.7-gnu/arch/arm/boot/dts/Makefile
--- linux-libre-3.6-gnu/arch/arm/boot/dts/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,107 @@
+ifeq ($(CONFIG_OF),y)
+
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
+	at91sam9263ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9m10g45ek.dtb \
+	at91sam9n12ek.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	kizbox.dtb \
+	tny_a9260.dtb \
+	tny_a9263.dtb \
+	tny_a9g20.dtb \
+	usb_a9260.dtb \
+	usb_a9263.dtb \
+	usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-dove-db.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+	exynos4210-smdkv310.dtb \
+	exynos4210-trats.dtb \
+	exynos5250-smdk5250.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
+	msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
+	armada-xp-db.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+	imx53-ard.dtb \
+	imx53-evk.dtb \
+	imx53-qsb.dtb \
+	imx53-smd.dtb \
+	imx6q-arm2.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+	imx23-olinuxino.dtb \
+	imx23-stmp378x_devb.dtb \
+	imx28-apx4devkit.dtb \
+	imx28-cfa10036.dtb \
+	imx28-cfa10049.dtb \
+	imx28-evk.dtb \
+	imx28-m28evk.dtb \
+	imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-evm.dtb \
+	omap3-tobi.dtb \
+	omap4-panda.dtb \
+	omap4-pandaES.dtb \
+	omap4-var_som.dtb \
+	omap4-sdp.dtb \
+	omap5-evm.dtb \
+	am335x-evm.dtb \
+	am335x-bone.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	r8a7740-armadillo800eva.dtb \
+	sh73a0-kzm9g.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+	spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+	spear310-evb.dtb \
+	spear320-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb \
+	tegra20-whistler.dtb \
+	tegra30-cardhu-a02.dtb \
+	tegra30-cardhu-a04.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb \
+	xenvm-4.2.dtb
+dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
+	wm8505-ref.dtb \
+	wm8650-mid.dtb
+
+endif
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/mmp2.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/mmp2.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/mmp2.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/mmp2.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -26,6 +26,11 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
 		axi@d4200000 {	/* AXI */
 			compatible = "mrvl,axi-bus", "simple-bus";
 			#address-cells = <1>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/msm8660-surf.dts linux-libre-3.7-gnu/arch/arm/boot/dts/msm8660-surf.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/msm8660-surf.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/msm8660-surf.dts	2012-12-10 22:30:57.000000000 -0500
@@ -7,7 +7,7 @@
 	compatible = "qcom,msm8660-surf", "qcom,msm8660";
 	interrupt-parent = <&intc>;
 
-	intc: interrupt-controller@02080000 {
+	intc: interrupt-controller@2080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
@@ -15,6 +15,23 @@
 		      < 0x02081000 0x1000 >;
 	};
 
+	timer@2000004 {
+		compatible = "qcom,msm-gpt", "qcom,msm-timer";
+		interrupts = <1 1 0x301>;
+		reg = <0x02000004 0x10>;
+		clock-frequency = <32768>;
+		cpu-offset = <0x40000>;
+	};
+
+	timer@2000024 {
+		compatible = "qcom,msm-dgt", "qcom,msm-timer";
+		interrupts = <1 0 0x301>;
+		reg = <0x02000024 0x10>,
+		      <0x02000034 0x4>;
+		clock-frequency = <6750000>;
+		cpu-offset = <0x40000>;
+	};
+
 	serial@19c400000 {
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/msm8960-cdp.dts linux-libre-3.7-gnu/arch/arm/boot/dts/msm8960-cdp.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/msm8960-cdp.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/msm8960-cdp.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,41 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm MSM8960 CDP";
+	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@2000000 {
+		compatible = "qcom,msm-qgic2";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0x02000000 0x1000 >,
+		      < 0x02002000 0x1000 >;
+	};
+
+	timer@200a004 {
+		compatible = "qcom,msm-gpt", "qcom,msm-timer";
+		interrupts = <1 2 0x301>;
+		reg = <0x0200a004 0x10>;
+		clock-frequency = <32768>;
+		cpu-offset = <0x80000>;
+	};
+
+	timer@200a024 {
+		compatible = "qcom,msm-dgt", "qcom,msm-timer";
+		interrupts = <1 1 0x301>;
+		reg = <0x0200a024 0x10>,
+		      <0x0200a034 0x4>;
+		clock-frequency = <6750000>;
+		cpu-offset = <0x80000>;
+	};
+
+	serial@19c400000 {
+		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+		reg = <0x16440000 0x1000>,
+		      <0x16400000 0x1000>;
+		interrupts = <0 154 0x0>;
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap2420.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/omap2420.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap2420.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap2420.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,48 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2420", "ti,omap2";
+
+	ocp {
+		omap2420_pmx: pinmux@48000030 {
+			compatible = "ti,omap2420-padconf", "pinctrl-single";
+			reg = <0x48000030 0x0113>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,hwmods = "mcbsp2";
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap2420-h4.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap2420-h4.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap2420-h4.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap2420-h4.dts	2012-12-10 22:30:57.000000000 -0500
@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap2.dtsi"
+/include/ "omap2420.dtsi"
 
 / {
 	model = "TI OMAP2420 H4 board";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap2430.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/omap2430.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap2430.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap2430.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,92 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2430", "ti,omap2";
+
+	ocp {
+		omap2430_pmx: pinmux@49002030 {
+			compatible = "ti,omap2430-padconf", "pinctrl-single";
+			reg = <0x49002030 0x0154>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <64>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>, /* RX interrupt */
+				     <61>; /* RX overflow interrupt */
+			interrupt-names = "common", "tx", "rx", "rx_overflow";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@4808c000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808c000 0xff>;
+			reg-names = "mpu";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
+
+		mcbsp4: mcbsp@4808e000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808e000 0xff>;
+			reg-names = "mpu";
+			interrupts = <18>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <19>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap36xx.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/omap36xx.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap36xx.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap36xx.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,25 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		uart4: serial@49042000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-beagle.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-beagle.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-beagle.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-beagle.dts	1969-12-31 19:00:00.000000000 -0500
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap3.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		vsim: regulator@10 {
-			compatible = "ti,twl4030-vsim";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-	};
-};
-
-/include/ "twl4030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in the EEPROM
-	 * as EDID data.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-beagle-xm.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-beagle-xm.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-beagle-xm.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-beagle-xm.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap36xx.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard xM";
+	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		vsim: regulator-vsim {
+			compatible = "ti,twl4030-vsim";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap3.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/omap3.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap3.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap3.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,6 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
-		serial3 = &uart4;
 	};
 
 	cpus {
@@ -69,6 +68,24 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		omap3_pmx_core: pinmux@48002030 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002030 0x05cc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
+		omap3_pmx_wkup: pinmux@0x48002a58 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002a58 0x5c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
 			ti,hwmods = "gpio1";
@@ -141,12 +158,6 @@
 			clock-frequency = <48000000>;
 		};
 
-		uart4: serial@49042000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap3-i2c";
 			#address-cells = <1>;
@@ -220,5 +231,74 @@
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
 		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@49022000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49022000 0xff>,
+			      <0x49028000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>, /* RX interrupt */
+				     <4>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <1280>;
+			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
+		};
+
+		mcbsp3: mcbsp@49024000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49024000 0xff>,
+			      <0x4902a000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <22>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>, /* RX interrupt */
+				     <5>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
+		};
+
+		mcbsp4: mcbsp@49026000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49026000 0xff>;
+			reg-names = "mpu";
+			interrupts = <23>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <27>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-evm.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-evm.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-evm.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-evm.dts	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,15 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
 };
 
 &i2c1 {
@@ -46,3 +55,7 @@
 		reg = <0x5c>;
 	};
 };
+
+&twl_gpio {
+	ti,use-leds;
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-overo.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-overo.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-overo.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-overo.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		overo {
+			label = "overo:blue:COM";
+			gpios = <&twl_gpio 19 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+	status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+	bus-width = <4>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-tobi.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-tobi.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap3-tobi.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap3-tobi.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/include/ "omap3-overo.dtsi"
+
+/ {
+	model = "TI OMAP3 Gumstix Overo on Tobi";
+	compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap4.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/omap4.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap4.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap4.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -30,12 +30,35 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
 		};
 	};
 
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+	};
+
+	L2: l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	local-timer@0x48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x48240600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -61,30 +84,6 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP4 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 *
-	 * MPU -+-- MPU_PRIVATE - GIC, L2
-	 *      |
-	 *      +----------------+----------+
-	 *      |                |          |
-	 *      +            +- EMIF - DDR  |
-	 *      |            |              |
-	 *      |            +     +--------+
-	 *      |            |     |
-	 *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
-	 *      |            |
-	 *      +- L3_MAIN --+- L4_CORE - IPs...
-	 *                   |
-	 *                   +- L4_PER - IPs...
-	 *                   |
-	 *                   +- L4_CFG -+- L4_WKUP - IPs...
-	 *                   |          |
-	 *                   |          +- IPs...
-	 *                   +- IPU ----+
-	 *                   |          |
-	 *                   +- DSP ----+
-	 *                   |          |
-	 *                   +- DSS ----+
-	 *
 	 * Since that will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
@@ -96,16 +95,27 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
-		gic: interrupt-controller@48241000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x48241000 0x1000>,
-			      <0x48240100 0x0100>;
+		omap4_pmx_core: pinmux@4a100040 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4a100040 0x0196>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+		omap4_pmx_wkup: pinmux@4a31e040 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4a31e040 0x0038>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
 		};
 
 		gpio1: gpio@4a310000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4a310000 0x200>;
+			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -115,6 +125,8 @@
 
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <0 30 0x4>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -124,6 +136,8 @@
 
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <0 31 0x4>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -133,6 +147,8 @@
 
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <0 32 0x4>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -142,6 +158,8 @@
 
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <0 33 0x4>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -151,6 +169,8 @@
 
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <0 34 0x4>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -160,30 +180,40 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <0 72 0x4>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <0 73 0x4>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <0 74 0x4>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <0 70 0x4>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <0 56 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -191,6 +221,8 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <0 57 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -198,6 +230,8 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <0 61 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -205,6 +239,8 @@
 
 		i2c4: i2c@48350000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48350000 0x100>;
+			interrupts = <0 62 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
@@ -212,6 +248,8 @@
 
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <0 65 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -220,6 +258,8 @@
 
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <0 66 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -228,6 +268,8 @@
 
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <0 91 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -236,6 +278,8 @@
 
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <0 48 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -244,6 +288,8 @@
 
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <0 83 0x4>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -251,30 +297,40 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 		};
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 		};
 
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 		};
 
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 		};
 
 		wdt2: wdt@4a314000 {
 			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+			reg = <0x4a314000 0x80>;
+			interrupts = <0 80 0x4>;
 			ti,hwmods = "wd_timer2";
 		};
 
@@ -282,6 +338,7 @@
 			compatible = "ti,omap4-mcpdm";
 			reg = <0x40132000 0x7f>, /* MPU private access */
 			      <0x49032000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
 			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
@@ -291,9 +348,95 @@
 			compatible = "ti,omap4-dmic";
 			reg = <0x4012e000 0x7f>, /* MPU private access */
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
 			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
+
+		mcbsp1: mcbsp@40122000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40122000 0xff>, /* MPU private access */
+			      <0x49022000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 17 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@40124000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40124000 0xff>, /* MPU private access */
+			      <0x49024000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 22 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@40126000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40126000 0xff>, /* MPU private access */
+			      <0x49026000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 23 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
+
+		mcbsp4: mcbsp@48096000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x48096000 0xff>; /* L4 Interconnect */
+			reg-names = "mpu";
+			interrupts = <0 16 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		keypad: keypad@4a31c000 {
+			compatible = "ti,omap4-keypad";
+			reg = <0x4a31c000 0x80>;
+			interrupts = <0 120 0x4>;
+			reg-names = "mpu";
+			ti,hwmods = "kbd";
+		};
+
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4c000000 0x100>;
+			interrupts = <0 110 0x4>;
+			ti,hwmods = "emif1";
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4d000000 0x100>;
+			interrupts = <0 111 0x4>;
+			ti,hwmods = "emif2";
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		ocp2scp {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp_usb_phy";
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap4-panda.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap4-panda.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap4-panda.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap4-panda.dts	2012-12-10 22:30:57.000000000 -0500
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 PandaBoard";
@@ -58,6 +59,41 @@
 	};
 };
 
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&mcpdm_pins
+			&mcbsp1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
+			0x160 0x100	/* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			0xc6 0x108	/* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
+			0xc8 0x108	/* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
+			0xca 0x118	/* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
+			0xcc 0x108	/* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
+			0xce 0x108	/* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			0xbe 0x100	/* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
+			0xc0 0x108	/* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
+			0xc2 0x8		/* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
+			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+		>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
@@ -126,3 +162,25 @@
 	ti,non-removable;
 	bus-width = <4>;
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&mcbsp2 {
+	status = "disabled";
+};
+
+&mcbsp3 {
+	status = "disabled";
+};
+
+&dmic {
+	status = "disabled";
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap4-sdp.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap4-sdp.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap4-sdp.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap4-sdp.dts	2012-12-10 22:30:57.000000000 -0500
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 SDP board";
@@ -18,7 +19,7 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	vdd_eth: fixedregulator@0 {
+	vdd_eth: fixedregulator-vdd-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
@@ -28,7 +29,7 @@
 		regulator-boot-on;
 	};
 
-	vbat: fixedregulator@2 {
+	vbat: fixedregulator-vbat {
 		compatible = "regulator-fixed";
 		regulator-name = "VBAT";
 		regulator-min-microvolt = <3750000>;
@@ -115,6 +116,86 @@
 	};
 };
 
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&mcpdm_pins
+			&dmic_pins
+			&mcbsp1_pins
+			&mcbsp2_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0xd8 0x118	/* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+			0xda 0		/* uart2_rts.uart2_rts OUTPUT | MODE0 */
+			0xdc 0x118	/* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+			0xde 0		/* uart2_tx.uart2_tx OUTPUT | MODE0 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x100 0x118	/* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+			0x102 0		/* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+			0x104 0x100	/* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+			0x106 0		/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			0x11c 0x100	/* uart4_rx.uart4_rx INPUT | MODE0 */
+			0x11e 0		/* uart4_tx.uart4_tx OUTPUT | MODE0 */
+		>;
+	};
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
+			0x160 0x100	/* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			0xc6 0x108	/* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
+			0xc8 0x108	/* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
+			0xca 0x118	/* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
+			0xcc 0x108	/* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
+			0xce 0x108	/* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+		>;
+	};
+
+	dmic_pins: pinmux_dmic_pins {
+		pinctrl-single,pins = <
+			0xd0 0		/* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */
+			0xd2 0x100	/* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */
+			0xd4 0x100	/* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */
+			0xd6 0x100	/* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			0xbe 0x100	/* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
+			0xc0 0x108	/* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
+			0xc2 0x8	/* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
+			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0xb6 0x100	/* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */
+			0xb8 0x108	/* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */
+			0xba 0x8	/* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */
+			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
+		>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
@@ -226,3 +307,102 @@
 	bus-width = <4>;
 	ti,non-removable;
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x00000012	/* KEY_E */
+			0x00010013	/* KEY_R */
+			0x00020014	/* KEY_T */
+			0x00030066	/* KEY_HOME */
+			0x0004003f	/* KEY_F5 */
+			0x000500f0	/* KEY_UNKNOWN */
+			0x00060017	/* KEY_I */
+			0x0007002a	/* KEY_LEFTSHIFT */
+			0x01000020	/* KEY_D*/
+			0x01010021	/* KEY_F */
+			0x01020022	/* KEY_G */
+			0x010300e7	/* KEY_SEND */
+			0x01040040	/* KEY_F6 */
+			0x010500f0	/* KEY_UNKNOWN */
+			0x01060025	/* KEY_K */
+			0x0107001c	/* KEY_ENTER */
+			0x0200002d	/* KEY_X */
+			0x0201002e	/* KEY_C */
+			0x0202002f	/* KEY_V */
+			0x0203006b	/* KEY_END */
+			0x02040041	/* KEY_F7 */
+			0x020500f0	/* KEY_UNKNOWN */
+			0x02060034	/* KEY_DOT */
+			0x0207003a	/* KEY_CAPSLOCK */
+			0x0300002c	/* KEY_Z */
+			0x0301004e	/* KEY_KPLUS */
+			0x03020030	/* KEY_B */
+			0x0303003b	/* KEY_F1 */
+			0x03040042	/* KEY_F8 */
+			0x030500f0	/* KEY_UNKNOWN */
+			0x03060018	/* KEY_O */
+			0x03070039	/* KEY_SPACE */
+			0x04000011	/* KEY_W */
+			0x04010015	/* KEY_Y */
+			0x04020016	/* KEY_U */
+			0x0403003c	/* KEY_F2 */
+			0x04040073	/* KEY_VOLUMEUP */
+			0x040500f0	/* KEY_UNKNOWN */
+			0x04060026	/* KEY_L */
+			0x04070069	/* KEY_LEFT */
+			0x0500001f	/* KEY_S */
+			0x05010023	/* KEY_H */
+			0x05020024	/* KEY_J */
+			0x0503003d	/* KEY_F3 */
+			0x05040043	/* KEY_F9 */
+			0x05050072	/* KEY_VOLUMEDOWN */
+			0x05060032	/* KEY_M */
+			0x0507006a	/* KEY_RIGHT */
+			0x06000010	/* KEY_Q */
+			0x0601001e	/* KEY_A */
+			0x06020031	/* KEY_N */
+			0x0603009e	/* KEY_BACK */
+			0x0604000e	/* KEY_BACKSPACE */
+			0x060500f0	/* KEY_UNKNOWN */
+			0x06060019	/* KEY_P */
+			0x06070067	/* KEY_UP */
+			0x07000094	/* KEY_PROG1 */
+			0x07010095	/* KEY_PROG2 */
+			0x070200ca	/* KEY_PROG3 */
+			0x070300cb	/* KEY_PROG4 */
+			0x0704003e	/* KEY_F4 */
+			0x070500f0	/* KEY_UNKNOWN */
+			0x07060160	/* KEY_OK */
+			0x0707006c>;	/* KEY_DOWN */
+	linux,input-no-autorepeat;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp3 {
+	status = "disabled";
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap5.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/omap5.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap5.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap5.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -33,9 +33,21 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a15";
+			timer {
+				compatible = "arm,armv7-timer";
+				/* 14th PPI IRQ, active low level-sensitive */
+				interrupts = <1 14 0x308>;
+				clock-frequency = <6144000>;
+			};
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a15";
+			timer {
+				compatible = "arm,armv7-timer";
+				/* 14th PPI IRQ, active low level-sensitive */
+				interrupts = <1 14 0x308>;
+				clock-frequency = <6144000>;
+			};
 		};
 	};
 
@@ -65,6 +77,23 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		omap5_pmx_core: pinmux@4a002840 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4a002840 0x01b6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+		omap5_pmx_wkup: pinmux@4ae0c840 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4ae0c840 0x0038>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
 		gic: interrupt-controller@48211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
@@ -145,6 +174,41 @@
 			#interrupt-cells = <1>;
 		};
 
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		i2c4: i2c@4807A000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+		};
+
+		i2c5: i2c@4807C000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart1";
@@ -180,5 +244,97 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+		};
+
+		mmc5: mmc@480d5000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc5";
+			ti,needs-special-reset;
+		};
+
+		keypad: keypad@4ae1c000 {
+			compatible = "ti,omap4-keypad";
+			ti,hwmods = "kbd";
+		};
+
+		mcpdm: mcpdm@40132000 {
+			compatible = "ti,omap4-mcpdm";
+			reg = <0x40132000 0x7f>, /* MPU private access */
+			      <0x49032000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 112 0x4>;
+			interrupt-parent = <&gic>;
+			ti,hwmods = "mcpdm";
+		};
+
+		dmic: dmic@4012e000 {
+			compatible = "ti,omap4-dmic";
+			reg = <0x4012e000 0x7f>, /* MPU private access */
+			      <0x4902e000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 114 0x4>;
+			interrupt-parent = <&gic>;
+			ti,hwmods = "dmic";
+		};
+
+		mcbsp1: mcbsp@40122000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40122000 0xff>, /* MPU private access */
+			      <0x49022000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 17 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@40124000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40124000 0xff>, /* MPU private access */
+			      <0x49024000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 22 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@40126000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40126000 0xff>, /* MPU private access */
+			      <0x49026000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 23 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/omap5-evm.dts linux-libre-3.7-gnu/arch/arm/boot/dts/omap5-evm.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/omap5-evm.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/omap5-evm.dts	2012-12-10 22:30:57.000000000 -0500
@@ -17,4 +17,126 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&mcpdm_pins
+			&dmic_pins
+			&mcbsp1_pins
+			&mcbsp2_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			0x18a 0x6	/* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			0x142 0x108	/* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+			0x15c 0x108	/* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */
+			0x15e 0x108	/* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */
+			0x160 0x118	/* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */
+			0x162 0x108	/* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */
+		>;
+	};
+
+	dmic_pins: pinmux_dmic_pins {
+		pinctrl-single,pins = <
+			0x144 0x100	/* abedmic_din1.abedmic_din1 INPUT | MODE0 */
+			0x146 0x100	/* abedmic_din2.abedmic_din2 INPUT | MODE0 */
+			0x148 0x100	/* abedmic_din3.abedmic_din3 INPUT | MODE0 */
+			0x14a 0		/* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			0x14c 0x101	/* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */
+			0x14e 0x9	/* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */
+			0x150 0x101	/* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */
+			0x152 0x109	/* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x154 0x108	/* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */
+			0x156 0x8	/* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */
+			0x158 0x100	/* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */
+			0x15a 0x100	/* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	/* Pressure Sensor */
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	/* Temperature Sensor */
+	tmp102@48{
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+	};
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x02020073	/* VOLUP */
+			0x02030072	/* VOLDOWM */
+			0x020400e7	/* SEND */
+			0x02050066	/* HOME */
+			0x0206006b	/* END */
+			0x020700d9>;	/* SEARCH */
+	linux,input-no-autorepeat;
+};
+
+&mcbsp3 {
+	status = "disabled";
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/phy3250.dts linux-libre-3.7-gnu/arch/arm/boot/dts/phy3250.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/phy3250.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/phy3250.dts	2012-12-10 22:30:57.000000000 -0500
@@ -135,13 +135,11 @@
 			ssp0: ssp@20084000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				pl022,num-chipselects = <1>;
+				num-cs = <1>;
 				cs-gpios = <&gpio 3 5 0>;
 
 				eeprom: at25@0 {
-					pl022,hierarchy = <0>;
 					pl022,interface = <0>;
-					pl022,slave-tx-disable = <0>;
 					pl022,com-mode = <0>;
 					pl022,rx-level-trig = <1>;
 					pl022,tx-level-trig = <1>;
@@ -191,16 +189,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led0 {
-			gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */
-			linux,default-trigger = "heartbeat";
+		led0 { /* red */
+			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
 			default-state = "off";
 		};
 
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
+		led1 { /* green */
+			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+			linux,default-trigger = "heartbeat";
 		};
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/prima2-cb.dts linux-libre-3.7-gnu/arch/arm/boot/dts/prima2-cb.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/prima2-cb.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/prima2-cb.dts	1969-12-31 19:00:00.000000000 -0500
@@ -1,424 +0,0 @@
-/dts-v1/;
-/ {
-	model = "SiRF Prima2 eVB";
-	compatible = "sirf,prima2-cb", "sirf,prima2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
-		linux,stdout-path = &uart1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
-			reg = <0x80040000 0x1000>;
-			interrupts = <59>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0 0x40000000>;
-		};
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clock-controller@88000000 {
-				compatible = "sirf,prima2-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-			};
-
-			reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
-				interrupts = <27>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			display@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,prima2-video-codec";
-				reg = <0xa0000000 0x8000000>;
-				interrupts = <5>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
-				interrupts = <17>;
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
-				interrupts = <18>;
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
-				interrupts = <19>;
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-			};
-
-			usp2: usp@b00a0000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb00a0000 0x10000>;
-				interrupts = <22>;
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-			};
-
-			gpio: gpio-controller@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,prima2-gpio-pinmux";
-				reg = <0xb0120000 0x10000>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd4: sdhci@56400000 {
-					cell-index = <4>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56400000 0x100000>;
-					interrupts = <39>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-			};
-
-			sata@b00f0000 {
-				compatible = "synopsys,dwc-ahsata";
-				reg = <0xb8020000 0x10000>;
-				interrupts = <37>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-			};
-		};
-	};
-};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/prima2.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/prima2.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/prima2.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/prima2.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,640 @@
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,prima2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* from bootloader */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x80000000>;
+
+		l2-cache-controller@80040000 {
+			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
+			reg = <0x80040000 0x1000>;
+			interrupts = <59>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0 0x40000000>;
+		};
+
+		intc: interrupt-controller@80020000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "sirf,prima2-intc";
+			reg = <0x80020000 0x1000>;
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x88000000 0x88000000 0x40000>;
+
+			clock-controller@88000000 {
+				compatible = "sirf,prima2-clkc";
+				reg = <0x88000000 0x1000>;
+				interrupts = <3>;
+			};
+
+			reset-controller@88010000 {
+				compatible = "sirf,prima2-rstc";
+				reg = <0x88010000 0x1000>;
+			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90000000 0x90000000 0x10000>;
+
+			memory-controller@90000000 {
+				compatible = "sirf,prima2-memc";
+				reg = <0x90000000 0x10000>;
+				interrupts = <27>;
+			};
+		};
+
+		disp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90010000 0x90010000 0x30000>;
+
+			display@90010000 {
+				compatible = "sirf,prima2-lcd";
+				reg = <0x90010000 0x20000>;
+				interrupts = <30>;
+			};
+
+			vpp@90020000 {
+				compatible = "sirf,prima2-vpp";
+				reg = <0x90020000 0x10000>;
+				interrupts = <31>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x98000000 0x98000000 0x8000000>;
+
+			graphics@98000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x98000000 0x8000000>;
+				interrupts = <6>;
+			};
+		};
+
+		multimedia-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			multimedia@a0000000 {
+				compatible = "sirf,prima2-video-codec";
+				reg = <0xa0000000 0x8000000>;
+				interrupts = <5>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+			dspif@a8000000 {
+				compatible = "sirf,prima2-dspif";
+				reg = <0xa8000000 0x10000>;
+				interrupts = <9>;
+			};
+
+			gps@a8010000 {
+				compatible = "sirf,prima2-gps";
+				reg = <0xa8010000 0x10000>;
+				interrupts = <7>;
+			};
+
+			dsp@a9000000 {
+				compatible = "sirf,prima2-dsp";
+				reg = <0xa9000000 0x1000000>;
+				interrupts = <8>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0xb0000000 0x180000>;
+
+			timer@b0020000 {
+				compatible = "sirf,prima2-tick";
+				reg = <0xb0020000 0x1000>;
+				interrupts = <0>;
+			};
+
+			nand@b0030000 {
+				compatible = "sirf,prima2-nand";
+				reg = <0xb0030000 0x10000>;
+				interrupts = <41>;
+			};
+
+			audio@b0040000 {
+				compatible = "sirf,prima2-audio";
+				reg = <0xb0040000 0x10000>;
+				interrupts = <35>;
+			};
+
+			uart0: uart@b0050000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0050000 0x10000>;
+				interrupts = <17>;
+			};
+
+			uart1: uart@b0060000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0060000 0x10000>;
+				interrupts = <18>;
+			};
+
+			uart2: uart@b0070000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0070000 0x10000>;
+				interrupts = <19>;
+			};
+
+			usp0: usp@b0080000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0080000 0x10000>;
+				interrupts = <20>;
+			};
+
+			usp1: usp@b0090000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0090000 0x10000>;
+				interrupts = <21>;
+			};
+
+			usp2: usp@b00a0000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb00a0000 0x10000>;
+				interrupts = <22>;
+			};
+
+			dmac0: dma-controller@b00b0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb00b0000 0x10000>;
+				interrupts = <12>;
+			};
+
+			dmac1: dma-controller@b0160000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb0160000 0x10000>;
+				interrupts = <13>;
+			};
+
+			vip@b00C0000 {
+				compatible = "sirf,prima2-vip";
+				reg = <0xb00C0000 0x10000>;
+			};
+
+			spi0: spi@b00d0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb00d0000 0x10000>;
+				interrupts = <15>;
+			};
+
+			spi1: spi@b0170000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb0170000 0x10000>;
+				interrupts = <16>;
+			};
+
+			i2c0: i2c@b00e0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00e0000 0x10000>;
+				interrupts = <24>;
+			};
+
+			i2c1: i2c@b00f0000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00f0000 0x10000>;
+				interrupts = <25>;
+			};
+
+			tsc@b0110000 {
+				compatible = "sirf,prima2-tsc";
+				reg = <0xb0110000 0x10000>;
+				interrupts = <33>;
+			};
+
+			gpio: pinctrl@b0120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,prima2-pinctrl";
+				reg = <0xb0120000 0x10000>;
+				interrupts = <43 44 45 46 47>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc4_pins_a: sdmmc4@0 {
+                                        sdmmc4 {
+                                                sirf,pins = "sdmmc4grp";
+                                                sirf,function = "sdmmc4";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+                                usp2_pins_a: usp2@0 {
+                                        usp2 {
+                                                sirf,pins = "usp2grp";
+                                                sirf,function = "usp2";
+                                        };
+                                };
+                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+                                        usb0_utmi_drvbus {
+                                                sirf,pins = "usb0_utmi_drvbusgrp";
+                                                sirf,function = "usb0_utmi_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_rst_pins_a: cko0_rst@0 {
+                                        cko0_rst {
+                                                sirf,pins = "cko0_rstgrp";
+                                                sirf,function = "cko0_rst";
+                                        };
+                                };
+                                cko1_rst_pins_a: cko1_rst@0 {
+                                        cko1_rst {
+                                                sirf,pins = "cko1_rstgrp";
+                                                sirf,function = "cko1_rst";
+                                        };
+                                };
+			};
+
+			pwm@b0130000 {
+				compatible = "sirf,prima2-pwm";
+				reg = <0xb0130000 0x10000>;
+			};
+
+			efusesys@b0140000 {
+				compatible = "sirf,prima2-efuse";
+				reg = <0xb0140000 0x10000>;
+			};
+
+			pulsec@b0150000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0xb0150000 0x10000>;
+				interrupts = <48>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,prima2-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x56000000 0x56000000 0x1b00000>;
+
+				sd0: sdhci@56000000 {
+					cell-index = <0>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56000000 0x100000>;
+					interrupts = <38>;
+				};
+
+				sd1: sdhci@56100000 {
+					cell-index = <1>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56100000 0x100000>;
+					interrupts = <38>;
+				};
+
+				sd2: sdhci@56200000 {
+					cell-index = <2>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56200000 0x100000>;
+					interrupts = <23>;
+				};
+
+				sd3: sdhci@56300000 {
+					cell-index = <3>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56300000 0x100000>;
+					interrupts = <23>;
+				};
+
+				sd4: sdhci@56400000 {
+					cell-index = <4>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56400000 0x100000>;
+					interrupts = <39>;
+				};
+
+				sd5: sdhci@56500000 {
+					cell-index = <5>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56500000 0x100000>;
+					interrupts = <39>;
+				};
+
+				pci-copy@57900000 {
+					compatible = "sirf,prima2-pcicp";
+					reg = <0x57900000 0x100000>;
+					interrupts = <40>;
+				};
+
+				rom-interface@57a00000 {
+					compatible = "sirf,prima2-romif";
+					reg = <0x57a00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80030000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,prima2-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <55 56 57>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,prima2-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <52 53 54>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,prima2-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb8000000 0xb8000000 0x40000>;
+
+			usb0: usb@b00e0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8000000 0x10000>;
+				interrupts = <10>;
+			};
+
+			usb1: usb@b00f0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8010000 0x10000>;
+				interrupts = <11>;
+			};
+
+			sata@b00f0000 {
+				compatible = "synopsys,dwc-ahsata";
+				reg = <0xb8020000 0x10000>;
+				interrupts = <37>;
+			};
+
+			security@b00f0000 {
+				compatible = "sirf,prima2-security";
+				reg = <0xb8030000 0x10000>;
+				interrupts = <42>;
+			};
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/prima2-evb.dts linux-libre-3.7-gnu/arch/arm/boot/dts/prima2-evb.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/prima2-evb.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/prima2-evb.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,37 @@
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "prima2.dtsi"
+
+/ {
+	model = "CSR SiRFprimaII Evaluation Board";
+	compatible = "sirf,prima2", "sirf,prima2-cb";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart@b0060000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins_a>;
+			};
+			spi@b00d0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins_a>;
+			};
+			spi@b0170000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+			};
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/pxa27x.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/pxa27x.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/pxa27x.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/pxa27x.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,14 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+	model = "Marvell PXA27x familiy SoC";
+	compatible = "marvell,pxa27x";
+
+	pxabus {
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <34>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/pxa2xx.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/pxa2xx.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/pxa2xx.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/pxa2xx.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,132 @@
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Marvell PXA2xx family SoC";
+	compatible = "marvell,pxa2xx";
+	interrupt-parent = <&pxairq>;
+
+	aliases {
+		serial0 = &ffuart;
+		serial1 = &btuart;
+		serial2 = &stuart;
+		serial3 = &hwuart;
+		i2c0 = &pwri2c;
+		i2c1 = &pxai2c1;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,xscale";
+		};
+	};
+
+	pxabus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pxairq: interrupt-controller@40d00000 {
+			#interrupt-cells = <1>;
+			compatible = "marvell,pxa-intc";
+			interrupt-controller;
+			interrupt-parent;
+			marvell,intc-nr-irqs = <32>;
+			reg = <0x40d00000 0xd0>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "mrvl,pxa-gpio";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x40e00000 0x10000>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupts = <10>;
+			interrupt-names = "gpio_mux";
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+			ranges;
+
+			gcb0: gpio@40e00000 {
+				reg = <0x40e00000 0x4>;
+			};
+
+			gcb1: gpio@40e00004 {
+				reg = <0x40e00004 0x4>;
+			};
+
+			gcb2: gpio@40e00008 {
+				reg = <0x40e00008 0x4>;
+			};
+			gcb3: gpio@40e0000c {
+				reg = <0x40e0000c 0x4>;
+			};
+		};
+
+		ffuart: uart@40100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40100000 0x30>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		btuart: uart@40200000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40200000 0x30>;
+			interrupts = <21>;
+			status = "disabled";
+		};
+
+		stuart: uart@40700000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40700000 0x30>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		hwuart: uart@41100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x41100000 0x30>;
+			interrupts = <7>;
+			status = "disabled";
+		};
+
+		pxai2c1: i2c@40301680 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40301680 0x30>;
+			interrupts = <18>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb0: ohci@4c000000 {
+			compatible = "mrvl,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@41100000 {
+			compatible = "mrvl,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+
+		rtc@40900000 {
+			compatible = "marvell,pxa-rtc";
+			reg = <0x40900000 0x3c>;
+			interrupts = <30 31>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/pxa3xx.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/pxa3xx.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/pxa3xx.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/pxa3xx.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,32 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+	model = "Marvell PXA3xx familiy SoC";
+	compatible = "marvell,pxa3xx";
+
+	pxabus {
+		pwri2c: i2c@40f500c0 {
+			compatible = "mrvl,pwri2c";
+			reg = <0x40f500c0 0x30>;
+			interrupts = <6>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		nand0: nand@43100000 {
+			compatible = "marvell,pxa3xx-nand";
+			reg = <0x43100000 90>;
+			interrupts = <45>;
+			#address-cells = <1>;
+			#size-cells = <1>;	
+			status = "disabled";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <56>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/pxa910-dkb.dts linux-libre-3.7-gnu/arch/arm/boot/dts/pxa910-dkb.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/pxa910-dkb.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/pxa910-dkb.dts	2012-12-10 22:30:57.000000000 -0500
@@ -29,6 +29,143 @@
 			};
 			twsi1: i2c@d4011000 {
 				status = "okay";
+
+				pmic: 88pm860x@34 {
+					compatible = "marvell,88pm860x";
+					reg = <0x34>;
+					interrupts = <4>;
+					interrupt-parent = <&intc>;
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					marvell,88pm860x-irq-read-clr;
+					marvell,88pm860x-slave-addr = <0x11>;
+
+					regulators {
+						BUCK1 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK2 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK3 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <3000000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO1 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <2800000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO2 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO3 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO4 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO5 {
+							regulator-min-microvolt = <2900000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO6 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO7 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO8 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO9 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO10 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO12 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO13 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO14 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+					rtc {
+						marvell,88pm860x-vrtc = <1>;
+					};
+					touch {
+						marvell,88pm860x-gpadc-prebias = <1>;
+						marvell,88pm860x-gpadc-slot-cycle = <1>;
+						marvell,88pm860x-tsi-prebias = <6>;
+						marvell,88pm860x-pen-prebias = <16>;
+						marvell,88pm860x-pen-prechg = <2>;
+						marvell,88pm860x-resistor-X = <300>;
+					};
+					backlights {
+						backlight-0 {
+							marvell,88pm860x-iset = <4>;
+							marvell,88pm860x-pwm = <3>;
+						};
+						backlight-2 {
+						};
+					};
+					leds {
+						led0-red {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-green {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-blue {
+							marvell,88pm860x-iset = <12>;
+						};
+					};
+				};
 			};
 			rtc: rtc@d4010000 {
 				status = "okay";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/pxa910.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/pxa910.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/pxa910.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/pxa910.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -25,6 +25,11 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
 		axi@d4200000 {	/* AXI */
 			compatible = "mrvl,axi-bus", "simple-bus";
 			#address-cells = <1>;
@@ -115,6 +120,8 @@
 
 			twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				mrvl,i2c-fast-mode;
@@ -123,6 +130,8 @@
 
 			twsi2: i2c@d4037000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4037000 0x1000>;
 				interrupts = <54>;
 				status = "disabled";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/snowball.dts linux-libre-3.7-gnu/arch/arm/boot/dts/snowball.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/snowball.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/snowball.dts	2012-12-10 22:30:57.000000000 -0500
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "db8500.dtsi"
+/include/ "dbx5x0.dtsi"
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
@@ -83,6 +83,22 @@
 	};
 
 	soc-u9500 {
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
 		external-bus@50000000 {
 			status = "okay";
 
@@ -111,7 +127,6 @@
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
-			#gpio-cells = <1>;
 			cd-gpios  = <&gpio6 26 0x4>; // 218
 			cd-inverted;
 
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/spear300-evb.dts linux-libre-3.7-gnu/arch/arm/boot/dts/spear300-evb.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/spear300-evb.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/spear300-evb.dts	2012-12-10 22:30:57.000000000 -0500
@@ -80,8 +80,7 @@
 		};
 
 		sdhci@70000000 {
-			int-gpio = <&gpio1 0 0>;
-			power-gpio = <&gpio1 2 1>;
+			cd-gpios = <&gpio1 0 0>;
 			status = "okay";
 		};
 
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/spear320-evb.dts linux-libre-3.7-gnu/arch/arm/boot/dts/spear320-evb.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/spear320-evb.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/spear320-evb.dts	2012-12-10 22:30:57.000000000 -0500
@@ -103,8 +103,6 @@
 		};
 
 		sdhci@70000000 {
-			power-gpio = <&gpio0 2 1>;
-			power_always_enb;
 			status = "okay";
 		};
 
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	pwm {
+	pwm: pwm {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;
@@ -170,7 +170,7 @@
 		reg = <0x7000e400 0x400>;
 	};
 
-	memory-controller@0x7000f000 {
+	memory-controller@7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;
@@ -183,7 +183,7 @@
 		       0x58000000 0x02000000>;	/* GART aperture */
 	};
 
-	memory-controller@0x7000f400 {
+	memory-controller@7000f400 {
 		compatible = "nvidia,tegra20-emc";
 		reg = <0x7000f400 0x200>;
 		#address-cells = <1>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-harmony.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-harmony.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-harmony.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-harmony.dts	2012-12-10 22:30:57.000000000 -0500
@@ -275,6 +275,160 @@
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo0";
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
 	};
 
 	pmc {
@@ -310,6 +464,72 @@
 		bus-width = <8>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 0>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 0>;
+			enable-active-high;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 0>;
+			enable-active-high;
+			/* Hack until board-harmony-pcie.c is removed */
+			status = "disabled";
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 22 0>; /* gpio PC6 */
+			enable-active-high;
+		};
+
+		regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 176 0>; /* gpio PW0 */
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-harmony",
 			     "nvidia,tegra-audio-wm8903";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide board";
+	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <187 0x04>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-medcom-wide",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Medcom-Wide";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-paz00.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-paz00.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-paz00.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-paz00.dts	2012-12-10 22:30:57.000000000 -0500
@@ -272,12 +272,170 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&p5valw_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "+1.2vs_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "+1.0vs_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "+3.7vs_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "+1.1vs_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "+1.2vs_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "+3.3vs_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "+2.85vs_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					/*
+					 * Research indicates this should be
+					 * 1.8v; other boards that use this
+					 * rail for the same purpose need it
+					 * set to 1.8v. The schematic signal
+					 * name is incorrect; perhaps copied
+					 * from an incorrect NVIDIA reference.
+					 */
+					regulator-name = "+2.85vs_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "+3.3vs_rtc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
 		adt7461@4c {
 			compatible = "adi,adt7461";
 			reg = <0x4c>;
 		};
 	};
 
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
 	usb@c5000000 {
 		status = "okay";
 	};
@@ -325,6 +483,21 @@
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		p5valw_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+5valw";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-alc5632-paz00",
 			"nvidia,tegra-audio-alc5632";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-plutux.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-plutux.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-plutux.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-plutux.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,50 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux board";
+	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <187 0x04>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-plutux",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Plutux";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-seaboard.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-seaboard.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-seaboard.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-seaboard.dts	2012-12-10 22:30:57.000000000 -0500
@@ -374,6 +374,154 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
 		temperature-sensor@4c {
 			compatible = "nct1008";
 			reg = <0x4c>;
@@ -387,7 +535,11 @@
 		};
 	};
 
-	memory-controller@0x7000f400 {
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	memory-controller@7000f400 {
 		emc-table@190000 {
 			reg = <190000>;
 			compatible = "nvidia,tegra20-emc-table";
@@ -473,6 +625,40 @@
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 0>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 0>;
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-seaboard",
 			     "nvidia,tegra-audio-wm8903";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,449 @@
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo0";
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-tec.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-tec.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-tec.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-tec.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <187 0x04>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-tec",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design TEC";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-ventana.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-ventana.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-ventana.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-ventana.dts	2012-12-10 22:30:57.000000000 -0500
@@ -289,6 +289,158 @@
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
 	};
 
 	usb@c5000000 {
@@ -317,6 +469,60 @@
 		bus-width = <8>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 0>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 0>;
+			enable-active-high;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 22 0>; /* gpio PC6 */
+			enable-active-high;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 176 0>; /* gpio PW0 */
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-ventana",
 			     "nvidia,tegra-audio-wm8903";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-whistler.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-whistler.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra20-whistler.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra20-whistler.dts	2012-12-10 22:30:57.000000000 -0500
@@ -261,6 +261,286 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		max8907@3c {
+			compatible = "maxim,max8907";
+			reg = <0x3c>;
+			interrupts = <0 86 0x4>;
+
+			maxim,system-power-controller;
+
+			mbatt-supply = <&usb0_vbus_reg>;
+			in-v1-supply = <&mbatt_reg>;
+			in-v2-supply = <&mbatt_reg>;
+			in-v3-supply = <&mbatt_reg>;
+			in1-supply = <&mbatt_reg>;
+			in2-supply = <&nvvdd_sv3_reg>;
+			in3-supply = <&mbatt_reg>;
+			in4-supply = <&mbatt_reg>;
+			in5-supply = <&mbatt_reg>;
+			in6-supply = <&mbatt_reg>;
+			in7-supply = <&mbatt_reg>;
+			in8-supply = <&mbatt_reg>;
+			in9-supply = <&mbatt_reg>;
+			in10-supply = <&mbatt_reg>;
+			in11-supply = <&mbatt_reg>;
+			in12-supply = <&mbatt_reg>;
+			in13-supply = <&mbatt_reg>;
+			in14-supply = <&mbatt_reg>;
+			in15-supply = <&mbatt_reg>;
+			in16-supply = <&mbatt_reg>;
+			in17-supply = <&nvvdd_sv3_reg>;
+			in18-supply = <&nvvdd_sv3_reg>;
+			in19-supply = <&mbatt_reg>;
+			in20-supply = <&mbatt_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mbatt_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "mbatt";
+					regulator-name = "vbat_pmu";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sd1";
+					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sd2";
+					regulator-name = "nvvdd_sv2,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				nvvdd_sv3_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sd3";
+					regulator-name = "nvvdd_sv3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo1";
+					regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo2";
+					regulator-name = "nvvdd_ldo2,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo3";
+					regulator-name = "nvvdd_ldo3,vcom_1v8b";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo4";
+					regulator-name = "nvvdd_ldo4,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo5";
+					regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo6";
+					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo7";
+					regulator-name = "nvvdd_ldo7,avddio_audio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo8";
+					regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo9";
+					regulator-name = "nvvdd_ldo9,avdd_cam*";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo10";
+					regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo11";
+					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@15 {
+					reg = <15>;
+					regulator-compatible = "ldo12";
+					regulator-name = "nvvdd_ldo12,vddio_sdio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@16 {
+					reg = <16>;
+					regulator-compatible = "ldo13";
+					regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@17 {
+					reg = <17>;
+					regulator-compatible = "ldo14";
+					regulator-name = "nvvdd_ldo14,avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@18 {
+					reg = <18>;
+					regulator-compatible = "ldo15";
+					regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@19 {
+					reg = <19>;
+					regulator-compatible = "ldo16";
+					regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				regulator@20 {
+					reg = <20>;
+					regulator-compatible = "ldo17";
+					regulator-name = "nvvdd_ldo17,vddio_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@21 {
+					reg = <21>;
+					regulator-compatible = "ldo18";
+					regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@22 {
+					reg = <22>;
+					regulator-compatible = "ldo19";
+					regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@23 {
+					reg = <23>;
+					regulator-compatible = "ldo20";
+					regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@24 {
+					reg = <24>;
+					regulator-compatible = "out5v";
+					regulator-name = "usb0_vbus_reg";
+				};
+
+				regulator@25 {
+					reg = <25>;
+					regulator-compatible = "out33v";
+					regulator-name = "pmu_out3v3";
+				};
+
+				regulator@26 {
+					reg = <26>;
+					regulator-compatible = "bbat";
+					regulator-name = "pmu_bbat";
+					regulator-min-microvolt = <2400000>;
+					regulator-max-microvolt = <2400000>;
+					regulator-always-on;
+				};
+
+				regulator@27 {
+					reg = <27>;
+					regulator-compatible = "sdby";
+					regulator-name = "vdd_aon";
+					regulator-always-on;
+				};
+
+				regulator@28 {
+					reg = <28>;
+					regulator-compatible = "vrtc";
+					regulator-name = "vrtc,pmu_vccadc";
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
 	};
 
 	usb@c5000000 {
@@ -284,6 +564,21 @@
 		bus-width = <8>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb0_vbus_reg: regulator {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8753-whistler",
 			     "nvidia,tegra-audio-wm8753";
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu-a02.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu-a02.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu-a02.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu-a02.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A02 version of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ddr_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "vdd_ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 0>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "sys_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 0>;
+		};
+
+		usb1_vbus_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 68 0>; /* GPIO PI4 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		usb3_vbus_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 63 0>; /* GPIO PH7 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		vdd_5v0_reg: regulator@104 {
+			compatible = "regulator-fixed";
+			reg = <104>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&pmic 2 0>;
+		};
+
+		vdd_bl_reg: regulator@105 {
+			compatible = "regulator-fixed";
+			reg = <105>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 83 0>; /* GPIO PK3 */
+		};
+	};
+};
+
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu-a04.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu-a04.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu-a04.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu-a04.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,98 @@
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A04 and later versions of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ddr_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			regulator-name = "ddr";
+			reg = <100>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 0>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "sys_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 0>;
+		};
+
+		usb1_vbus_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 238 0>; /* GPIO PDD6 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		usb3_vbus_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 236 0>; /* GPIO PDD4 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		vdd_5v0_reg: regulator@104 {
+			compatible = "regulator-fixed";
+			reg = <104>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&pmic 8 0>;
+		};
+
+		vdd_bl_reg: regulator@105 {
+			compatible = "regulator-fixed";
+			reg = <105>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 234 0>; /* GPIO PDD2 */
+		};
+
+		vdd_bl2_reg: regulator@106 {
+			compatible = "regulator-fixed";
+			reg = <106>;
+			regulator-name = "vdd_bl2";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 232 0>; /* GPIO PDD0 */
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu.dts linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu.dts	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu.dts	1969-12-31 19:00:00.000000000 -0500
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra30.dtsi"
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu evaluation board";
-	compatible = "nvidia,cardhu", "nvidia,tegra30";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	pinmux {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins =	"dap2_fs_pa2",
-						"dap2_sclk_pa3",
-						"dap2_din_pa4",
-						"dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-		clock-frequency = <408000000>;
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		/* ALS and Proximity sensor */
-		isl29028@44 {
-			compatible = "isil,isl29028";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <88 0x04>; /*gpio PL0 */
-		};
-	};
-
-	i2c@7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <179 0x04>; /* gpio PW3 */
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		tps62361 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-	};
-
-	ahub {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000000 {
-		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
-		power-gpios = <&gpio 31 0>; /* gpio PD7 */
-		bus-width = <4>;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-cardhu",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Cardhu";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 0>;
-		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-	};
-};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,475 @@
+/include/ "tegra30.dtsi"
+
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu evaluation board";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins =	"dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+		clock-frequency = <408000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* ALS and Proximity sensor */
+		isl29028@44 {
+			compatible = "isil,isl29028";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <88 0x04>; /*gpio PL0 */
+		};
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <179 0x04>; /* gpio PW3 */
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		tps62361 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <0 86 0x4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_ac_bat_reg>;
+			vcc2-supply = <&vdd_ac_bat_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_ac_bat_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_ac_bat_reg>;
+			vccio-supply = <&vdd_ac_bat_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				vdd1_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "vdd1";
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: regulator@1 {
+					reg = <1>;
+					regulator-compatible = "vdd2";
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: regulator@2 {
+					reg = <2>;
+					regulator-compatible = "vddctrl";
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				vio_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "vio";
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo6";
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	ahub {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	pmc {
+		status = "okay";
+		nvidia,invert-interrupt;
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_ac_bat_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_ac_bat";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		cam_1v8_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "cam_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&gpio 220 0>; /* gpio PBB4 */
+			vin-supply = <&vio_reg>;
+		};
+
+		cp_5v_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "cp_5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+			gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+		};
+
+		emmc_3v3_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "emmc_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 25 0>; /* gpio PD1 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		modem_3v3_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "modem_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 30 0>; /* gpio PD6 */
+		};
+
+		pex_hvdd_3v3_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "pex_hvdd_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 95 0>; /* gpio PL7 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam1_ldo_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "vdd_cam1_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio 142 0>; /* gpio PR6 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam2_ldo_reg: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "vdd_cam2_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio 143 0>; /* gpio PR7 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam3_ldo_reg: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "vdd_cam3_ldo";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 144 0>; /* gpio PS0 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_com_reg: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "vdd_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 24 0>; /* gpio PD0 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_fuse_3v3_reg: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "vdd_fuse_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 94 0>; /* gpio PL6 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_pnl1_reg: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "vdd_pnl1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 92 0>; /* gpio PL4 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_vid_reg: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "vddio_vid";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 152 0>; /* GPIO PT0 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-cardhu",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Cardhu";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tegra30.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tegra30.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -73,8 +73,8 @@
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd0    /* Pad control registers */
-		       0x70003000 0x3e0>; /* Mux registers */
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	serial@70006000 {
@@ -117,7 +117,7 @@
 		status = "disabled";
 	};
 
-	pwm {
+	pwm: pwm {
 		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tps65217.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/tps65217.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tps65217.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tps65217.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/tps65910.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/tps65910.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/tps65910.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/tps65910.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65910";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vrtc_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "vrtc";
+		};
+
+		vio_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "vio";
+		};
+
+		vdd1_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "vdd1";
+		};
+
+		vdd2_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "vdd2";
+		};
+
+		vdd3_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "vdd3";
+		};
+
+		vdig1_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "vdig1";
+		};
+
+		vdig2_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "vdig2";
+		};
+
+		vpll_reg: regulator@7 {
+			reg = <7>;
+			regulator-compatible = "vpll";
+		};
+
+		vdac_reg: regulator@8 {
+			reg = <8>;
+			regulator-compatible = "vdac";
+		};
+
+		vaux1_reg: regulator@9 {
+			reg = <9>;
+			regulator-compatible = "vaux1";
+		};
+
+		vaux2_reg: regulator@10 {
+			reg = <10>;
+			regulator-compatible = "vaux2";
+		};
+
+		vaux33_reg: regulator@11 {
+			reg = <11>;
+			regulator-compatible = "vaux33";
+		};
+
+		vmmc_reg: regulator@12 {
+			reg = <12>;
+			regulator-compatible = "vmmc";
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/twl4030.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/twl4030.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/twl4030.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/twl4030.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -19,19 +19,19 @@
 		interrupts = <11>;
 	};
 
-	vdac: regulator@0 {
+	vdac: regulator-vdac {
 		compatible = "ti,twl4030-vdac";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vpll2: regulator@1 {
+	vpll2: regulator-vpll2 {
 		compatible = "ti,twl4030-vpll2";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vmmc1: regulator@2 {
+	vmmc1: regulator-vmmc1 {
 		compatible = "ti,twl4030-vmmc1";
 		regulator-min-microvolt = <1850000>;
 		regulator-max-microvolt = <3150000>;
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/twl6030.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/twl6030.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/twl6030.dtsi	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/twl6030.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -20,70 +20,70 @@
 		interrupts = <11>;
 	};
 
-	vaux1: regulator@0 {
+	vaux1: regulator-vaux1 {
 		compatible = "ti,twl6030-vaux1";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <3000000>;
 	};
 
-	vaux2: regulator@1 {
+	vaux2: regulator-vaux2 {
 		compatible = "ti,twl6030-vaux2";
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <2800000>;
 	};
 
-	vaux3: regulator@2 {
+	vaux3: regulator-vaux3 {
 		compatible = "ti,twl6030-vaux3";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <3000000>;
 	};
 
-	vmmc: regulator@3 {
+	vmmc: regulator-vmmc {
 		compatible = "ti,twl6030-vmmc";
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <3000000>;
 	};
 
-	vpp: regulator@4 {
+	vpp: regulator-vpp {
 		compatible = "ti,twl6030-vpp";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <2500000>;
 	};
 
-	vusim: regulator@5 {
+	vusim: regulator-vusim {
 		compatible = "ti,twl6030-vusim";
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <2900000>;
 	};
 
-	vdac: regulator@6 {
+	vdac: regulator-vdac {
 		compatible = "ti,twl6030-vdac";
 	};
 
-	vana: regulator@7 {
+	vana: regulator-vana {
 		compatible = "ti,twl6030-vana";
 	};
 
-	vcxio: regulator@8 {
+	vcxio: regulator-vcxio {
 		compatible = "ti,twl6030-vcxio";
 		regulator-always-on;
 	};
 
-	vusb: regulator@9 {
+	vusb: regulator-vusb {
 		compatible = "ti,twl6030-vusb";
 	};
 
-	v1v8: regulator@10 {
+	v1v8: regulator-v1v8 {
 		compatible = "ti,twl6030-v1v8";
 		regulator-always-on;
 	};
 
-	v2v1: regulator@11 {
+	v2v1: regulator-v2v1 {
 		compatible = "ti,twl6030-v2v1";
 		regulator-always-on;
 	};
 
-	clk32kg: regulator@12 {
+	clk32kg: regulator-clk32kg {
 		compatible = "ti,twl6030-clk32kg";
 	};
 };
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/vt8500-bv07.dts linux-libre-3.7-gnu/arch/arm/boot/dts/vt8500-bv07.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/vt8500-bv07.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/vt8500-bv07.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,36 @@
+/*
+ * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "vt8500.dtsi"
+
+/ {
+	model = "Benign BV07 Netbook";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display@0 {
+		modes {
+			mode0: mode@0 {
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock = <0>;	/* unused but required */
+				bpp = <16>;	/* non-standard but required */
+			};
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/vt8500.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/vt8500.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/vt8500.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/vt8500.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,116 @@
+/*
+ * vt8500.dtsi - Device tree file for VIA VT8500 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "via,vt8500";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		intc: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "via,vt8500-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d800e400 {
+			compatible = "via,vt8500-fb";
+			reg = <0xd800e400 0x400>;
+			interrupts = <12>;
+			display = <&display>;
+			default-mode = <&mode0>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/wm8505.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/wm8505.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/wm8505.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/wm8505.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,143 @@
+/*
+ * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8505";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "wm,wm8505-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007100 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007100 0x200>;
+			interrupts = <1>;
+		};
+
+		uhci@d8007300 {
+			compatible = "platform-uhci";
+			reg = <0xd8007300 0x200>;
+			interrupts = <0>;
+		};
+
+		fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+			display = <&display>;
+			default-mode = <&mode0>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8370000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8370000 0x1040>;
+			interrupts = <31>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8380000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8380000 0x1040>;
+			interrupts = <30>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/wm8505-ref.dts linux-libre-3.7-gnu/arch/arm/boot/dts/wm8505-ref.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/wm8505-ref.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/wm8505-ref.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,36 @@
+/*
+ * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8505.dtsi"
+
+/ {
+	model = "Wondermedia WM8505 Netbook";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display@0 {
+		modes {
+			mode0: mode@0 {
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock = <0>;	/* unused but required */
+				bpp = <32>;	/* non-standard but required */
+			};
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/wm8650.dtsi linux-libre-3.7-gnu/arch/arm/boot/dts/wm8650.dtsi
--- linux-libre-3.6-gnu/arch/arm/boot/dts/wm8650.dtsi	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/wm8650.dtsi	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,147 @@
+/*
+ * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8650";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "wm,wm8650-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				arm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				sdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x328>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x254>;
+					enable-bit = <18>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+			display = <&display>;
+			default-mode = <&mode0>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/wm8650-mid.dts linux-libre-3.7-gnu/arch/arm/boot/dts/wm8650-mid.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/wm8650-mid.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/wm8650-mid.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,36 @@
+/*
+ * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8650.dtsi"
+
+/ {
+	model = "Wondermedia WM8650-MID Tablet";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display@0 {
+		modes {
+			mode0: mode@0 {
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock = <0>;	/* unused but required */
+				bpp = <16>;	/* non-standard but required */
+			};
+		};
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/dts/xenvm-4.2.dts linux-libre-3.7-gnu/arch/arm/boot/dts/xenvm-4.2.dts
--- linux-libre-3.6-gnu/arch/arm/boot/dts/xenvm-4.2.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/boot/dts/xenvm-4.2.dts	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,68 @@
+/*
+ * Xen Virtual Machine for unprivileged guests
+ *
+ * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "XENVM-4.2";
+	compatible = "xen,xenvm-4.2", "xen,xenvm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		/* this field is going to be adjusted by the hypervisor */
+		bootargs = "console=hvc0 root=/dev/xvda";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0x80000000 0 0x08000000>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x100>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	hypervisor {
+		compatible = "xen,xen-4.2", "xen,xen";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0xb0000000 0 0x20000>;
+		/* this field is going to be adjusted by the hypervisor */
+		interrupts = <1 15 0xf08>;
+	};
+
+	motherboard {
+		arm,v2m-memory-map = "rs1";
+	};
+};
diff -druN linux-libre-3.6-gnu/arch/arm/boot/Makefile linux-libre-3.7-gnu/arch/arm/boot/Makefile
--- linux-libre-3.6-gnu/arch/arm/boot/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/boot/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -15,6 +15,8 @@
 include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
+include $(srctree)/arch/arm/boot/dts/Makefile
+
 # Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
@@ -31,7 +33,7 @@
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -46,14 +48,14 @@
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -88,7 +90,7 @@
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
+	@$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -96,7 +98,7 @@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:
diff -druN linux-libre-3.6-gnu/arch/arm/common/it8152.c linux-libre-3.7-gnu/arch/arm/common/it8152.c
--- linux-libre-3.6-gnu/arch/arm/common/it8152.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/common/it8152.c	2012-12-10 22:30:57.000000000 -0500
@@ -284,11 +284,17 @@
 
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
-	it8152_io.start = IT8152_IO_BASE + 0x12000;
-	it8152_io.end	= IT8152_IO_BASE + 0x12000 + 0x100000;
+	/*
+	 * FIXME: use pci_ioremap_io to remap the IO space here and
+	 * move over to the generic io.h implementation.
+	 * This requires solving the same problem for PXA PCMCIA
+	 * support.
+	 */
+	it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000;
+	it8152_io.end	= (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000;
 
 	sys->mem_offset = 0x10000000;
-	sys->io_offset  = IT8152_IO_BASE;
+	sys->io_offset  = (unsigned long)IT8152_IO_BASE;
 
 	if (request_resource(&ioport_resource, &it8152_io)) {
 		printk(KERN_ERR "PCI: unable to allocate IO region\n");
diff -druN linux-libre-3.6-gnu/arch/arm/common/Kconfig linux-libre-3.7-gnu/arch/arm/common/Kconfig
--- linux-libre-3.6-gnu/arch/arm/common/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/common/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,15 +1,15 @@
 config ARM_GIC
+	bool
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	bool
 
 config GIC_NON_BANKED
 	bool
 
 config ARM_VIC
+	bool
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	bool
 
 config ARM_VIC_NR
 	int
diff -druN linux-libre-3.6-gnu/arch/arm/common/timer-sp.c linux-libre-3.7-gnu/arch/arm/common/timer-sp.c
--- linux-libre-3.6-gnu/arch/arm/common/timer-sp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/common/timer-sp.c	2012-12-10 22:30:57.000000000 -0500
@@ -162,7 +162,6 @@
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
-	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
+	evt->cpumask = cpu_possible_mask;
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
diff -druN linux-libre-3.6-gnu/arch/arm/configs/afeb9260_defconfig linux-libre-3.7-gnu/arch/arm/configs/afeb9260_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/afeb9260_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/afeb9260_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -39,7 +39,6 @@
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_ATMEL_SSC=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/armadillo800eva_defconfig linux-libre-3.7-gnu/arch/arm/configs/armadillo800eva_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/armadillo800eva_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/armadillo800eva_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -85,6 +85,7 @@
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_HWMON is not set
 CONFIG_MEDIA_SUPPORT=y
@@ -120,6 +121,8 @@
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_SH_MMCIF=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S35390A=y
 CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_UIO=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/at91rm9200_defconfig linux-libre-3.7-gnu/arch/arm/configs/at91rm9200_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/at91rm9200_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/at91rm9200_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -232,7 +232,7 @@
 CONFIG_USB_ETH=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=y
+CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/at91sam9261_defconfig linux-libre-3.7-gnu/arch/arm/configs/at91sam9261_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/at91sam9261_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/at91sam9261_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -128,7 +128,7 @@
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/at91sam9263_defconfig linux-libre-3.7-gnu/arch/arm/configs/at91sam9263_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/at91sam9263_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/at91sam9263_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -61,7 +61,6 @@
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
@@ -138,7 +137,7 @@
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ATMEL_PWM=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/at91sam9g20_defconfig linux-libre-3.7-gnu/arch/arm/configs/at91sam9g20_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/at91sam9g20_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/at91sam9g20_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -99,7 +99,7 @@
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/at91sam9rl_defconfig linux-libre-3.7-gnu/arch/arm/configs/at91sam9rl_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/at91sam9rl_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/at91sam9rl_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -60,7 +60,7 @@
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/bcm2835_defconfig linux-libre-3.7-gnu/arch/arm/configs/bcm2835_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/bcm2835_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/configs/bcm2835_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,95 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_BLOCK is not set
+CONFIG_ARCH_BCM2835=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_CLEANCACHE=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_SCHED_TRACER=y
+CONFIG_STACK_TRACER=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+CONFIG_TEST_KSTRTOX=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff -druN linux-libre-3.6-gnu/arch/arm/configs/bcmring_defconfig linux-libre-3.7-gnu/arch/arm/configs/bcmring_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/bcmring_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/bcmring_defconfig	1969-12-31 19:00:00.000000000 -0500
@@ -1,79 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-CONFIG_PERF_EVENTS=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_BCMRING=y
-CONFIG_BCM_ZRELADDR=0x8000
-CONFIG_CPU_32v6K=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0e000000
-CONFIG_ZBOOT_ROM_BSS=0x0ea00000
-CONFIG_ZBOOT_ROM=y
-CONFIG_NET=y
-# CONFIG_WIRELESS is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_BCM_UMI=y
-CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_HEADERS_CHECK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set
diff -druN linux-libre-3.6-gnu/arch/arm/configs/cam60_defconfig linux-libre-3.7-gnu/arch/arm/configs/cam60_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/cam60_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/cam60_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -49,7 +49,6 @@
 CONFIG_MTD_PLATRAM=m
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/corgi_defconfig linux-libre-3.7-gnu/arch/arm/configs/corgi_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/corgi_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/corgi_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -97,7 +97,6 @@
 CONFIG_MTD_ROM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_SHARPSL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_IDE=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/cpu9260_defconfig linux-libre-3.7-gnu/arch/arm/configs/cpu9260_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/cpu9260_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/cpu9260_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -82,7 +82,7 @@
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/cpu9g20_defconfig linux-libre-3.7-gnu/arch/arm/configs/cpu9g20_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/cpu9g20_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/cpu9g20_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -82,7 +82,7 @@
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/ep93xx_defconfig linux-libre-3.7-gnu/arch/arm/configs/ep93xx_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/ep93xx_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/ep93xx_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -61,7 +61,6 @@
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_SCSI=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/imx_v6_v7_defconfig linux-libre-3.7-gnu/arch/arm/configs/imx_v6_v7_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/imx_v6_v7_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/imx_v6_v7_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -32,9 +32,7 @@
 CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_MX51_EFIKAMX=y
-CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_SMP=y
@@ -42,7 +40,6 @@
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_VFP=y
 CONFIG_NEON=y
@@ -142,6 +139,7 @@
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MC9S08DZ60=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -158,6 +156,7 @@
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_MX3=y
 CONFIG_FB=y
+CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
@@ -179,6 +178,9 @@
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_MXS_PHY=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/kirkwood_defconfig linux-libre-3.7-gnu/arch/arm/configs/kirkwood_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/kirkwood_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/kirkwood_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,5 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -15,9 +17,19 @@
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_ESATA_SHEEVAPLUG=y
 CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_DOCKSTAR=y
+CONFIG_MACH_DREAMPLUG_DT=y
+CONFIG_MACH_ICONNECT_DT=y
+CONFIG_MACH_DLINK_KIRKWOOD_DT=y
+CONFIG_MACH_IB62X0_DT=y
+CONFIG_MACH_TS219_DT=y
+CONFIG_MACH_DOCKSTAR_DT=y
+CONFIG_MACH_GOFLEXNET_DT=y
+CONFIG_MACH_LSXL_DT=y
+CONFIG_MACH_IOMEGA_IX2_200_DT=y
+CONFIG_MACH_KM_KIRKWOOD_DT=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
+CONFIG_MACH_DOCKSTAR=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
 CONFIG_MACH_OPENRD_ULTIMATE=y
@@ -29,8 +41,6 @@
 CONFIG_MACH_NET5BIG_V2=y
 CONFIG_MACH_T5325=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
@@ -47,13 +57,11 @@
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -69,7 +77,6 @@
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -78,22 +85,21 @@
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_NET_PCI=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
+CONFIG_MARVELL_PHY=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
@@ -103,7 +109,8 @@
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
@@ -119,10 +126,8 @@
 CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_PRINTER=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
@@ -148,7 +153,6 @@
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -158,7 +162,6 @@
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
@@ -171,11 +174,8 @@
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
diff -druN linux-libre-3.6-gnu/arch/arm/configs/kzm9d_defconfig linux-libre-3.7-gnu/arch/arm/configs/kzm9d_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/kzm9d_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/kzm9d_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -8,6 +8,7 @@
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
diff -druN linux-libre-3.6-gnu/arch/arm/configs/kzm9g_defconfig linux-libre-3.7-gnu/arch/arm/configs/kzm9g_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/kzm9g_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/kzm9g_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -14,6 +14,7 @@
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -22,7 +23,6 @@
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SHMOBILE=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
 CONFIG_ARCH_SH73A0=y
 CONFIG_MACH_KZM9G=y
 CONFIG_MEMORY_START=0x41000000
@@ -70,6 +70,7 @@
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ST1232=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/lpc32xx_defconfig linux-libre-3.7-gnu/arch/arm/configs/lpc32xx_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/lpc32xx_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/lpc32xx_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -133,7 +133,6 @@
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
@@ -149,6 +148,7 @@
 CONFIG_LEDS_PCA9532=y
 CONFIG_LEDS_PCA9532_GPIO=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -161,10 +161,13 @@
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_LPC32XX=y
 CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
 CONFIG_STAGING=y
 CONFIG_LPC32XX_ADC=y
-CONFIG_MAX517=y
 CONFIG_IIO=y
+CONFIG_MAX517=y
+CONFIG_PWM=y
+CONFIG_PWM_LPC32XX=y
 CONFIG_EXT2_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/marzen_defconfig linux-libre-3.7-gnu/arch/arm/configs/marzen_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/marzen_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/marzen_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,13 +1,14 @@
 # CONFIG_ARM_PATCH_PHYS_VIRT is not set
 CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZMA=y
+CONFIG_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SHMOBILE=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_MACH_MARZEN=y
@@ -21,7 +22,6 @@
 CONFIG_ARM_ERRATA_460075=y
 CONFIG_ARM_ERRATA_743622=y
 CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
 CONFIG_SMP=y
 # CONFIG_ARM_CPU_TOPOLOGY is not set
 CONFIG_AEABI=y
@@ -29,13 +29,16 @@
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
+CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -68,17 +71,21 @@
 # CONFIG_HW_RANDOM is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
 CONFIG_SSB=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_REDUCED=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/mini2440_defconfig linux-libre-3.7-gnu/arch/arm/configs/mini2440_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/mini2440_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/mini2440_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -102,7 +102,6 @@
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_S3C2410=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_LPDDR=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/mmp2_defconfig linux-libre-3.7-gnu/arch/arm/configs/mmp2_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/mmp2_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/mmp2_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -16,7 +16,7 @@
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -90,6 +90,9 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_MMP_UART3=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/multi_v7_defconfig linux-libre-3.7-gnu/arch/arm/configs/multi_v7_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/multi_v7_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/configs/multi_v7_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,57 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_SOCFPGA=y
+# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_ATA=y
+CONFIG_SATA_HIGHBANK=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_SI=y
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_HIGHBANK_MC=y
+CONFIG_EDAC_HIGHBANK_L2=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/mv78xx0_defconfig linux-libre-3.7-gnu/arch/arm/configs/mv78xx0_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/mv78xx0_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/mv78xx0_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -49,7 +49,6 @@
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_SCSI_PROC_FS is not set
diff -druN linux-libre-3.6-gnu/arch/arm/configs/mvebu_defconfig linux-libre-3.7-gnu/arch/arm/configs/mvebu_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/mvebu_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/mvebu_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,6 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -9,10 +9,12 @@
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_CACHE_L2X0 is not set
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
+# CONFIG_COMPACTION is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -21,6 +23,10 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
diff -druN linux-libre-3.6-gnu/arch/arm/configs/mxs_defconfig linux-libre-3.7-gnu/arch/arm/configs/mxs_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/mxs_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/mxs_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -23,12 +23,6 @@
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXS=y
 CONFIG_MACH_MXS_DT=y
-CONFIG_MACH_MX23EVK=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_MACH_STMP378X_DEVB=y
-CONFIG_MACH_TX28=y
-CONFIG_MACH_M28EVK=y
-CONFIG_MACH_APX4DEVKIT=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -59,6 +53,9 @@
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_NETDEVICES=y
@@ -88,13 +85,13 @@
 CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
+CONFIG_SPI_MXS=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 # CONFIG_MFD_SUPPORT is not set
 CONFIG_DISPLAY_SUPPORT=m
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
@@ -109,14 +106,45 @@
 CONFIG_SND_SOC_SGTL5000=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_STMP=y
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
 CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_FSCACHE=m
diff -druN linux-libre-3.6-gnu/arch/arm/configs/nhk8815_defconfig linux-libre-3.7-gnu/arch/arm/configs/nhk8815_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/nhk8815_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/nhk8815_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -57,7 +57,6 @@
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_NOMADIK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/omap2plus_defconfig linux-libre-3.7-gnu/arch/arm/configs/omap2plus_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/omap2plus_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/omap2plus_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -123,6 +123,7 @@
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_TWL4030=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/orion5x_defconfig linux-libre-3.7-gnu/arch/arm/configs/orion5x_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/orion5x_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/orion5x_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -72,7 +72,6 @@
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/pnx4008_defconfig linux-libre-3.7-gnu/arch/arm/configs/pnx4008_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/pnx4008_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/pnx4008_defconfig	1969-12-31 19:00:00.000000000 -0500
@@ -1,472 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PNX4008=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
diff -druN linux-libre-3.6-gnu/arch/arm/configs/prima2_defconfig linux-libre-3.7-gnu/arch/arm/configs/prima2_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/prima2_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/prima2_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,4 +1,6 @@
 CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
@@ -8,9 +10,7 @@
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_ARCH_PRIMA2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_SIRF=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_KEXEC=y
@@ -36,7 +36,6 @@
 CONFIG_SPI_SIRF=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_MASS_STORAGE=m
diff -druN linux-libre-3.6-gnu/arch/arm/configs/pxa3xx_defconfig linux-libre-3.7-gnu/arch/arm/configs/pxa3xx_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/pxa3xx_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/pxa3xx_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -36,7 +36,6 @@
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
 CONFIG_MTD_ONENAND=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/pxa910_defconfig linux-libre-3.7-gnu/arch/arm/configs/pxa910_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/pxa910_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/pxa910_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -66,5 +66,7 @@
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_MMP_UART2=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/qil-a9260_defconfig linux-libre-3.7-gnu/arch/arm/configs/qil-a9260_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/qil-a9260_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/qil-a9260_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -50,7 +50,6 @@
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
@@ -87,7 +86,7 @@
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/s3c6400_defconfig linux-libre-3.7-gnu/arch/arm/configs/s3c6400_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/s3c6400_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/s3c6400_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -9,11 +9,14 @@
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_MACH_SMDK6400=y
 CONFIG_MACH_ANW6410=y
+CONFIG_MACH_MINI6410=y
+CONFIG_MACH_REAL6410=y
 CONFIG_MACH_SMDK6410=y
 CONFIG_MACH_NCP=y
 CONFIG_MACH_HMT=y
 CONFIG_MACH_SMARTQ5=y
 CONFIG_MACH_SMARTQ7=y
+CONFIG_MACH_WLF_CRAGG_6410=y
 CONFIG_CPU_32v6K=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
diff -druN linux-libre-3.6-gnu/arch/arm/configs/sam9_l9260_defconfig linux-libre-3.7-gnu/arch/arm/configs/sam9_l9260_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/sam9_l9260_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/sam9_l9260_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -39,7 +39,7 @@
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_RESERVE=3
+CONFIG_MTD_UBI_BEB_LIMIT=25
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/spitz_defconfig linux-libre-3.7-gnu/arch/arm/configs/spitz_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/spitz_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/spitz_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -94,7 +94,6 @@
 CONFIG_MTD_ROM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_SHARPSL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_IDE=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/stamp9g20_defconfig linux-libre-3.7-gnu/arch/arm/configs/stamp9g20_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/stamp9g20_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/stamp9g20_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -100,7 +100,6 @@
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/tegra_defconfig linux-libre-3.7-gnu/arch/arm/configs/tegra_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/tegra_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/tegra_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -24,11 +24,11 @@
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_TEGRA=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
-CONFIG_MACH_HARMONY=y
-CONFIG_MACH_PAZ00=y
-CONFIG_MACH_TRIMSLICE=y
+CONFIG_TEGRA_PCI=y
+CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
@@ -67,7 +67,18 @@
 CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
-# CONFIG_WIRELESS is not set
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIBTUSB=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
@@ -87,7 +98,8 @@
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
-# CONFIG_WLAN is not set
+CONFIG_RT2X00=y
+CONFIG_RT2800USB=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
@@ -105,25 +117,31 @@
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
 CONFIG_SPI_TEGRA=y
-CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_TPS6586X=y
+CONFIG_GPIO_TPS65910=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_SBS=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
+CONFIG_MFD_MAX8907=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
@@ -136,15 +154,29 @@
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_ACM=y
+CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_TPS65910=y
 CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_TEGRA=y
+CONFIG_DMADEVICES=y
+CONFIG_TEGRA20_APB_DMA=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
@@ -152,10 +184,14 @@
 CONFIG_MFD_NVEC=y
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
+CONFIG_NVEC_POWER=y
+CONFIG_NVEC_PAZ00=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y
 CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_TEGRA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -168,6 +204,7 @@
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
@@ -186,8 +223,6 @@
 CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_TWOFISH=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_TEGRA_AES=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/usb-a9260_defconfig linux-libre-3.7-gnu/arch/arm/configs/usb-a9260_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/usb-a9260_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/usb-a9260_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -49,7 +49,6 @@
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
diff -druN linux-libre-3.6-gnu/arch/arm/configs/versatile_defconfig linux-libre-3.7-gnu/arch/arm/configs/versatile_defconfig
--- linux-libre-3.6-gnu/arch/arm/configs/versatile_defconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/configs/versatile_defconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,3 +1,4 @@
+CONFIG_ARCH_VERSATILE=y
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
diff -druN linux-libre-3.6-gnu/arch/arm/crypto/aes-armv4.S linux-libre-3.7-gnu/arch/arm/crypto/aes-armv4.S
--- linux-libre-3.6-gnu/arch/arm/crypto/aes-armv4.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/crypto/aes-armv4.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,1112 @@
+#define __ARM_ARCH__ __LINUX_ARM_ARCH__
+@ ====================================================================
+@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+@ project. The module is, however, dual licensed under OpenSSL and
+@ CRYPTOGAMS licenses depending on where you obtain it. For further
+@ details see http://www.openssl.org/~appro/cryptogams/.
+@ ====================================================================
+
+@ AES for ARMv4
+
+@ January 2007.
+@
+@ Code uses single 1K S-box and is >2 times faster than code generated
+@ by gcc-3.4.1. This is thanks to unique feature of ARMv4 ISA, which
+@ allows to merge logical or arithmetic operation with shift or rotate
+@ in one instruction and emit combined result every cycle. The module
+@ is endian-neutral. The performance is ~42 cycles/byte for 128-bit
+@ key [on single-issue Xscale PXA250 core].
+
+@ May 2007.
+@
+@ AES_set_[en|de]crypt_key is added.
+
+@ July 2010.
+@
+@ Rescheduling for dual-issue pipeline resulted in 12% improvement on
+@ Cortex A8 core and ~25 cycles per byte processed with 128-bit key.
+
+@ February 2011.
+@
+@ Profiler-assisted and platform-specific optimization resulted in 16%
+@ improvement on Cortex A8 core and ~21.5 cycles per byte.
+
+@ A little glue here to select the correct code below for the ARM CPU
+@ that is being targetted.
+
+.text
+.code	32
+
+.type	AES_Te,%object
+.align	5
+AES_Te:
+.word	0xc66363a5, 0xf87c7c84, 0xee777799, 0xf67b7b8d
+.word	0xfff2f20d, 0xd66b6bbd, 0xde6f6fb1, 0x91c5c554
+.word	0x60303050, 0x02010103, 0xce6767a9, 0x562b2b7d
+.word	0xe7fefe19, 0xb5d7d762, 0x4dababe6, 0xec76769a
+.word	0x8fcaca45, 0x1f82829d, 0x89c9c940, 0xfa7d7d87
+.word	0xeffafa15, 0xb25959eb, 0x8e4747c9, 0xfbf0f00b
+.word	0x41adadec, 0xb3d4d467, 0x5fa2a2fd, 0x45afafea
+.word	0x239c9cbf, 0x53a4a4f7, 0xe4727296, 0x9bc0c05b
+.word	0x75b7b7c2, 0xe1fdfd1c, 0x3d9393ae, 0x4c26266a
+.word	0x6c36365a, 0x7e3f3f41, 0xf5f7f702, 0x83cccc4f
+.word	0x6834345c, 0x51a5a5f4, 0xd1e5e534, 0xf9f1f108
+.word	0xe2717193, 0xabd8d873, 0x62313153, 0x2a15153f
+.word	0x0804040c, 0x95c7c752, 0x46232365, 0x9dc3c35e
+.word	0x30181828, 0x379696a1, 0x0a05050f, 0x2f9a9ab5
+.word	0x0e070709, 0x24121236, 0x1b80809b, 0xdfe2e23d
+.word	0xcdebeb26, 0x4e272769, 0x7fb2b2cd, 0xea75759f
+.word	0x1209091b, 0x1d83839e, 0x582c2c74, 0x341a1a2e
+.word	0x361b1b2d, 0xdc6e6eb2, 0xb45a5aee, 0x5ba0a0fb
+.word	0xa45252f6, 0x763b3b4d, 0xb7d6d661, 0x7db3b3ce
+.word	0x5229297b, 0xdde3e33e, 0x5e2f2f71, 0x13848497
+.word	0xa65353f5, 0xb9d1d168, 0x00000000, 0xc1eded2c
+.word	0x40202060, 0xe3fcfc1f, 0x79b1b1c8, 0xb65b5bed
+.word	0xd46a6abe, 0x8dcbcb46, 0x67bebed9, 0x7239394b
+.word	0x944a4ade, 0x984c4cd4, 0xb05858e8, 0x85cfcf4a
+.word	0xbbd0d06b, 0xc5efef2a, 0x4faaaae5, 0xedfbfb16
+.word	0x864343c5, 0x9a4d4dd7, 0x66333355, 0x11858594
+.word	0x8a4545cf, 0xe9f9f910, 0x04020206, 0xfe7f7f81
+.word	0xa05050f0, 0x783c3c44, 0x259f9fba, 0x4ba8a8e3
+.word	0xa25151f3, 0x5da3a3fe, 0x804040c0, 0x058f8f8a
+.word	0x3f9292ad, 0x219d9dbc, 0x70383848, 0xf1f5f504
+.word	0x63bcbcdf, 0x77b6b6c1, 0xafdada75, 0x42212163
+.word	0x20101030, 0xe5ffff1a, 0xfdf3f30e, 0xbfd2d26d
+.word	0x81cdcd4c, 0x180c0c14, 0x26131335, 0xc3ecec2f
+.word	0xbe5f5fe1, 0x359797a2, 0x884444cc, 0x2e171739
+.word	0x93c4c457, 0x55a7a7f2, 0xfc7e7e82, 0x7a3d3d47
+.word	0xc86464ac, 0xba5d5de7, 0x3219192b, 0xe6737395
+.word	0xc06060a0, 0x19818198, 0x9e4f4fd1, 0xa3dcdc7f
+.word	0x44222266, 0x542a2a7e, 0x3b9090ab, 0x0b888883
+.word	0x8c4646ca, 0xc7eeee29, 0x6bb8b8d3, 0x2814143c
+.word	0xa7dede79, 0xbc5e5ee2, 0x160b0b1d, 0xaddbdb76
+.word	0xdbe0e03b, 0x64323256, 0x743a3a4e, 0x140a0a1e
+.word	0x924949db, 0x0c06060a, 0x4824246c, 0xb85c5ce4
+.word	0x9fc2c25d, 0xbdd3d36e, 0x43acacef, 0xc46262a6
+.word	0x399191a8, 0x319595a4, 0xd3e4e437, 0xf279798b
+.word	0xd5e7e732, 0x8bc8c843, 0x6e373759, 0xda6d6db7
+.word	0x018d8d8c, 0xb1d5d564, 0x9c4e4ed2, 0x49a9a9e0
+.word	0xd86c6cb4, 0xac5656fa, 0xf3f4f407, 0xcfeaea25
+.word	0xca6565af, 0xf47a7a8e, 0x47aeaee9, 0x10080818
+.word	0x6fbabad5, 0xf0787888, 0x4a25256f, 0x5c2e2e72
+.word	0x381c1c24, 0x57a6a6f1, 0x73b4b4c7, 0x97c6c651
+.word	0xcbe8e823, 0xa1dddd7c, 0xe874749c, 0x3e1f1f21
+.word	0x964b4bdd, 0x61bdbddc, 0x0d8b8b86, 0x0f8a8a85
+.word	0xe0707090, 0x7c3e3e42, 0x71b5b5c4, 0xcc6666aa
+.word	0x904848d8, 0x06030305, 0xf7f6f601, 0x1c0e0e12
+.word	0xc26161a3, 0x6a35355f, 0xae5757f9, 0x69b9b9d0
+.word	0x17868691, 0x99c1c158, 0x3a1d1d27, 0x279e9eb9
+.word	0xd9e1e138, 0xebf8f813, 0x2b9898b3, 0x22111133
+.word	0xd26969bb, 0xa9d9d970, 0x078e8e89, 0x339494a7
+.word	0x2d9b9bb6, 0x3c1e1e22, 0x15878792, 0xc9e9e920
+.word	0x87cece49, 0xaa5555ff, 0x50282878, 0xa5dfdf7a
+.word	0x038c8c8f, 0x59a1a1f8, 0x09898980, 0x1a0d0d17
+.word	0x65bfbfda, 0xd7e6e631, 0x844242c6, 0xd06868b8
+.word	0x824141c3, 0x299999b0, 0x5a2d2d77, 0x1e0f0f11
+.word	0x7bb0b0cb, 0xa85454fc, 0x6dbbbbd6, 0x2c16163a
+@ Te4[256]
+.byte	0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5
+.byte	0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76
+.byte	0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0
+.byte	0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0
+.byte	0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc
+.byte	0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15
+.byte	0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a
+.byte	0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75
+.byte	0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0
+.byte	0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84
+.byte	0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b
+.byte	0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf
+.byte	0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85
+.byte	0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8
+.byte	0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5
+.byte	0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2
+.byte	0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17
+.byte	0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73
+.byte	0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88
+.byte	0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb
+.byte	0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c
+.byte	0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79
+.byte	0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9
+.byte	0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08
+.byte	0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6
+.byte	0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a
+.byte	0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e
+.byte	0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e
+.byte	0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94
+.byte	0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf
+.byte	0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68
+.byte	0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
+@ rcon[]
+.word	0x01000000, 0x02000000, 0x04000000, 0x08000000
+.word	0x10000000, 0x20000000, 0x40000000, 0x80000000
+.word	0x1B000000, 0x36000000, 0, 0, 0, 0, 0, 0
+.size	AES_Te,.-AES_Te
+
+@ void AES_encrypt(const unsigned char *in, unsigned char *out,
+@ 		 const AES_KEY *key) {
+.global AES_encrypt
+.type   AES_encrypt,%function
+.align	5
+AES_encrypt:
+	sub	r3,pc,#8		@ AES_encrypt
+	stmdb   sp!,{r1,r4-r12,lr}
+	mov	r12,r0		@ inp
+	mov	r11,r2
+	sub	r10,r3,#AES_encrypt-AES_Te	@ Te
+#if __ARM_ARCH__<7
+	ldrb	r0,[r12,#3]	@ load input data in endian-neutral
+	ldrb	r4,[r12,#2]	@ manner...
+	ldrb	r5,[r12,#1]
+	ldrb	r6,[r12,#0]
+	orr	r0,r0,r4,lsl#8
+	ldrb	r1,[r12,#7]
+	orr	r0,r0,r5,lsl#16
+	ldrb	r4,[r12,#6]
+	orr	r0,r0,r6,lsl#24
+	ldrb	r5,[r12,#5]
+	ldrb	r6,[r12,#4]
+	orr	r1,r1,r4,lsl#8
+	ldrb	r2,[r12,#11]
+	orr	r1,r1,r5,lsl#16
+	ldrb	r4,[r12,#10]
+	orr	r1,r1,r6,lsl#24
+	ldrb	r5,[r12,#9]
+	ldrb	r6,[r12,#8]
+	orr	r2,r2,r4,lsl#8
+	ldrb	r3,[r12,#15]
+	orr	r2,r2,r5,lsl#16
+	ldrb	r4,[r12,#14]
+	orr	r2,r2,r6,lsl#24
+	ldrb	r5,[r12,#13]
+	ldrb	r6,[r12,#12]
+	orr	r3,r3,r4,lsl#8
+	orr	r3,r3,r5,lsl#16
+	orr	r3,r3,r6,lsl#24
+#else
+	ldr	r0,[r12,#0]
+	ldr	r1,[r12,#4]
+	ldr	r2,[r12,#8]
+	ldr	r3,[r12,#12]
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+#endif
+	bl	_armv4_AES_encrypt
+
+	ldr	r12,[sp],#4		@ pop out
+#if __ARM_ARCH__>=7
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+	str	r0,[r12,#0]
+	str	r1,[r12,#4]
+	str	r2,[r12,#8]
+	str	r3,[r12,#12]
+#else
+	mov	r4,r0,lsr#24		@ write output in endian-neutral
+	mov	r5,r0,lsr#16		@ manner...
+	mov	r6,r0,lsr#8
+	strb	r4,[r12,#0]
+	strb	r5,[r12,#1]
+	mov	r4,r1,lsr#24
+	strb	r6,[r12,#2]
+	mov	r5,r1,lsr#16
+	strb	r0,[r12,#3]
+	mov	r6,r1,lsr#8
+	strb	r4,[r12,#4]
+	strb	r5,[r12,#5]
+	mov	r4,r2,lsr#24
+	strb	r6,[r12,#6]
+	mov	r5,r2,lsr#16
+	strb	r1,[r12,#7]
+	mov	r6,r2,lsr#8
+	strb	r4,[r12,#8]
+	strb	r5,[r12,#9]
+	mov	r4,r3,lsr#24
+	strb	r6,[r12,#10]
+	mov	r5,r3,lsr#16
+	strb	r2,[r12,#11]
+	mov	r6,r3,lsr#8
+	strb	r4,[r12,#12]
+	strb	r5,[r12,#13]
+	strb	r6,[r12,#14]
+	strb	r3,[r12,#15]
+#endif
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia   sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.size	AES_encrypt,.-AES_encrypt
+
+.type   _armv4_AES_encrypt,%function
+.align	2
+_armv4_AES_encrypt:
+	str	lr,[sp,#-4]!		@ push lr
+	ldmia	r11!,{r4-r7}
+	eor	r0,r0,r4
+	ldr	r12,[r11,#240-16]
+	eor	r1,r1,r5
+	eor	r2,r2,r6
+	eor	r3,r3,r7
+	sub	r12,r12,#1
+	mov	lr,#255
+
+	and	r7,lr,r0
+	and	r8,lr,r0,lsr#8
+	and	r9,lr,r0,lsr#16
+	mov	r0,r0,lsr#24
+.Lenc_loop:
+	ldr	r4,[r10,r7,lsl#2]	@ Te3[s0>>0]
+	and	r7,lr,r1,lsr#16	@ i0
+	ldr	r5,[r10,r8,lsl#2]	@ Te2[s0>>8]
+	and	r8,lr,r1
+	ldr	r6,[r10,r9,lsl#2]	@ Te1[s0>>16]
+	and	r9,lr,r1,lsr#8
+	ldr	r0,[r10,r0,lsl#2]	@ Te0[s0>>24]
+	mov	r1,r1,lsr#24
+
+	ldr	r7,[r10,r7,lsl#2]	@ Te1[s1>>16]
+	ldr	r8,[r10,r8,lsl#2]	@ Te3[s1>>0]
+	ldr	r9,[r10,r9,lsl#2]	@ Te2[s1>>8]
+	eor	r0,r0,r7,ror#8
+	ldr	r1,[r10,r1,lsl#2]	@ Te0[s1>>24]
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r5,r8,ror#8
+	and	r8,lr,r2,lsr#16	@ i1
+	eor	r6,r6,r9,ror#8
+	and	r9,lr,r2
+	ldr	r7,[r10,r7,lsl#2]	@ Te2[s2>>8]
+	eor	r1,r1,r4,ror#24
+	ldr	r8,[r10,r8,lsl#2]	@ Te1[s2>>16]
+	mov	r2,r2,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Te3[s2>>0]
+	eor	r0,r0,r7,ror#16
+	ldr	r2,[r10,r2,lsl#2]	@ Te0[s2>>24]
+	and	r7,lr,r3		@ i0
+	eor	r1,r1,r8,ror#8
+	and	r8,lr,r3,lsr#8	@ i1
+	eor	r6,r6,r9,ror#16
+	and	r9,lr,r3,lsr#16	@ i2
+	ldr	r7,[r10,r7,lsl#2]	@ Te3[s3>>0]
+	eor	r2,r2,r5,ror#16
+	ldr	r8,[r10,r8,lsl#2]	@ Te2[s3>>8]
+	mov	r3,r3,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Te1[s3>>16]
+	eor	r0,r0,r7,ror#24
+	ldr	r7,[r11],#16
+	eor	r1,r1,r8,ror#16
+	ldr	r3,[r10,r3,lsl#2]	@ Te0[s3>>24]
+	eor	r2,r2,r9,ror#8
+	ldr	r4,[r11,#-12]
+	eor	r3,r3,r6,ror#8
+
+	ldr	r5,[r11,#-8]
+	eor	r0,r0,r7
+	ldr	r6,[r11,#-4]
+	and	r7,lr,r0
+	eor	r1,r1,r4
+	and	r8,lr,r0,lsr#8
+	eor	r2,r2,r5
+	and	r9,lr,r0,lsr#16
+	eor	r3,r3,r6
+	mov	r0,r0,lsr#24
+
+	subs	r12,r12,#1
+	bne	.Lenc_loop
+
+	add	r10,r10,#2
+
+	ldrb	r4,[r10,r7,lsl#2]	@ Te4[s0>>0]
+	and	r7,lr,r1,lsr#16	@ i0
+	ldrb	r5,[r10,r8,lsl#2]	@ Te4[s0>>8]
+	and	r8,lr,r1
+	ldrb	r6,[r10,r9,lsl#2]	@ Te4[s0>>16]
+	and	r9,lr,r1,lsr#8
+	ldrb	r0,[r10,r0,lsl#2]	@ Te4[s0>>24]
+	mov	r1,r1,lsr#24
+
+	ldrb	r7,[r10,r7,lsl#2]	@ Te4[s1>>16]
+	ldrb	r8,[r10,r8,lsl#2]	@ Te4[s1>>0]
+	ldrb	r9,[r10,r9,lsl#2]	@ Te4[s1>>8]
+	eor	r0,r7,r0,lsl#8
+	ldrb	r1,[r10,r1,lsl#2]	@ Te4[s1>>24]
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r8,r5,lsl#8
+	and	r8,lr,r2,lsr#16	@ i1
+	eor	r6,r9,r6,lsl#8
+	and	r9,lr,r2
+	ldrb	r7,[r10,r7,lsl#2]	@ Te4[s2>>8]
+	eor	r1,r4,r1,lsl#24
+	ldrb	r8,[r10,r8,lsl#2]	@ Te4[s2>>16]
+	mov	r2,r2,lsr#24
+
+	ldrb	r9,[r10,r9,lsl#2]	@ Te4[s2>>0]
+	eor	r0,r7,r0,lsl#8
+	ldrb	r2,[r10,r2,lsl#2]	@ Te4[s2>>24]
+	and	r7,lr,r3		@ i0
+	eor	r1,r1,r8,lsl#16
+	and	r8,lr,r3,lsr#8	@ i1
+	eor	r6,r9,r6,lsl#8
+	and	r9,lr,r3,lsr#16	@ i2
+	ldrb	r7,[r10,r7,lsl#2]	@ Te4[s3>>0]
+	eor	r2,r5,r2,lsl#24
+	ldrb	r8,[r10,r8,lsl#2]	@ Te4[s3>>8]
+	mov	r3,r3,lsr#24
+
+	ldrb	r9,[r10,r9,lsl#2]	@ Te4[s3>>16]
+	eor	r0,r7,r0,lsl#8
+	ldr	r7,[r11,#0]
+	ldrb	r3,[r10,r3,lsl#2]	@ Te4[s3>>24]
+	eor	r1,r1,r8,lsl#8
+	ldr	r4,[r11,#4]
+	eor	r2,r2,r9,lsl#16
+	ldr	r5,[r11,#8]
+	eor	r3,r6,r3,lsl#24
+	ldr	r6,[r11,#12]
+
+	eor	r0,r0,r7
+	eor	r1,r1,r4
+	eor	r2,r2,r5
+	eor	r3,r3,r6
+
+	sub	r10,r10,#2
+	ldr	pc,[sp],#4		@ pop and return
+.size	_armv4_AES_encrypt,.-_armv4_AES_encrypt
+
+.global private_AES_set_encrypt_key
+.type   private_AES_set_encrypt_key,%function
+.align	5
+private_AES_set_encrypt_key:
+_armv4_AES_set_encrypt_key:
+	sub	r3,pc,#8		@ AES_set_encrypt_key
+	teq	r0,#0
+	moveq	r0,#-1
+	beq	.Labrt
+	teq	r2,#0
+	moveq	r0,#-1
+	beq	.Labrt
+
+	teq	r1,#128
+	beq	.Lok
+	teq	r1,#192
+	beq	.Lok
+	teq	r1,#256
+	movne	r0,#-1
+	bne	.Labrt
+
+.Lok:	stmdb   sp!,{r4-r12,lr}
+	sub	r10,r3,#_armv4_AES_set_encrypt_key-AES_Te-1024	@ Te4
+
+	mov	r12,r0		@ inp
+	mov	lr,r1			@ bits
+	mov	r11,r2			@ key
+
+#if __ARM_ARCH__<7
+	ldrb	r0,[r12,#3]	@ load input data in endian-neutral
+	ldrb	r4,[r12,#2]	@ manner...
+	ldrb	r5,[r12,#1]
+	ldrb	r6,[r12,#0]
+	orr	r0,r0,r4,lsl#8
+	ldrb	r1,[r12,#7]
+	orr	r0,r0,r5,lsl#16
+	ldrb	r4,[r12,#6]
+	orr	r0,r0,r6,lsl#24
+	ldrb	r5,[r12,#5]
+	ldrb	r6,[r12,#4]
+	orr	r1,r1,r4,lsl#8
+	ldrb	r2,[r12,#11]
+	orr	r1,r1,r5,lsl#16
+	ldrb	r4,[r12,#10]
+	orr	r1,r1,r6,lsl#24
+	ldrb	r5,[r12,#9]
+	ldrb	r6,[r12,#8]
+	orr	r2,r2,r4,lsl#8
+	ldrb	r3,[r12,#15]
+	orr	r2,r2,r5,lsl#16
+	ldrb	r4,[r12,#14]
+	orr	r2,r2,r6,lsl#24
+	ldrb	r5,[r12,#13]
+	ldrb	r6,[r12,#12]
+	orr	r3,r3,r4,lsl#8
+	str	r0,[r11],#16
+	orr	r3,r3,r5,lsl#16
+	str	r1,[r11,#-12]
+	orr	r3,r3,r6,lsl#24
+	str	r2,[r11,#-8]
+	str	r3,[r11,#-4]
+#else
+	ldr	r0,[r12,#0]
+	ldr	r1,[r12,#4]
+	ldr	r2,[r12,#8]
+	ldr	r3,[r12,#12]
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+	str	r0,[r11],#16
+	str	r1,[r11,#-12]
+	str	r2,[r11,#-8]
+	str	r3,[r11,#-4]
+#endif
+
+	teq	lr,#128
+	bne	.Lnot128
+	mov	r12,#10
+	str	r12,[r11,#240-16]
+	add	r6,r10,#256			@ rcon
+	mov	lr,#255
+
+.L128_loop:
+	and	r5,lr,r3,lsr#24
+	and	r7,lr,r3,lsr#16
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r3,lsr#8
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r3
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#24
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r6],#4			@ rcon[i++]
+	orr	r5,r5,r9,lsl#8
+	eor	r5,r5,r4
+	eor	r0,r0,r5			@ rk[4]=rk[0]^...
+	eor	r1,r1,r0			@ rk[5]=rk[1]^rk[4]
+	str	r0,[r11],#16
+	eor	r2,r2,r1			@ rk[6]=rk[2]^rk[5]
+	str	r1,[r11,#-12]
+	eor	r3,r3,r2			@ rk[7]=rk[3]^rk[6]
+	str	r2,[r11,#-8]
+	subs	r12,r12,#1
+	str	r3,[r11,#-4]
+	bne	.L128_loop
+	sub	r2,r11,#176
+	b	.Ldone
+
+.Lnot128:
+#if __ARM_ARCH__<7
+	ldrb	r8,[r12,#19]
+	ldrb	r4,[r12,#18]
+	ldrb	r5,[r12,#17]
+	ldrb	r6,[r12,#16]
+	orr	r8,r8,r4,lsl#8
+	ldrb	r9,[r12,#23]
+	orr	r8,r8,r5,lsl#16
+	ldrb	r4,[r12,#22]
+	orr	r8,r8,r6,lsl#24
+	ldrb	r5,[r12,#21]
+	ldrb	r6,[r12,#20]
+	orr	r9,r9,r4,lsl#8
+	orr	r9,r9,r5,lsl#16
+	str	r8,[r11],#8
+	orr	r9,r9,r6,lsl#24
+	str	r9,[r11,#-4]
+#else
+	ldr	r8,[r12,#16]
+	ldr	r9,[r12,#20]
+#ifdef __ARMEL__
+	rev	r8,r8
+	rev	r9,r9
+#endif
+	str	r8,[r11],#8
+	str	r9,[r11,#-4]
+#endif
+
+	teq	lr,#192
+	bne	.Lnot192
+	mov	r12,#12
+	str	r12,[r11,#240-24]
+	add	r6,r10,#256			@ rcon
+	mov	lr,#255
+	mov	r12,#8
+
+.L192_loop:
+	and	r5,lr,r9,lsr#24
+	and	r7,lr,r9,lsr#16
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r9,lsr#8
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r9
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#24
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r6],#4			@ rcon[i++]
+	orr	r5,r5,r9,lsl#8
+	eor	r9,r5,r4
+	eor	r0,r0,r9			@ rk[6]=rk[0]^...
+	eor	r1,r1,r0			@ rk[7]=rk[1]^rk[6]
+	str	r0,[r11],#24
+	eor	r2,r2,r1			@ rk[8]=rk[2]^rk[7]
+	str	r1,[r11,#-20]
+	eor	r3,r3,r2			@ rk[9]=rk[3]^rk[8]
+	str	r2,[r11,#-16]
+	subs	r12,r12,#1
+	str	r3,[r11,#-12]
+	subeq	r2,r11,#216
+	beq	.Ldone
+
+	ldr	r7,[r11,#-32]
+	ldr	r8,[r11,#-28]
+	eor	r7,r7,r3			@ rk[10]=rk[4]^rk[9]
+	eor	r9,r8,r7			@ rk[11]=rk[5]^rk[10]
+	str	r7,[r11,#-8]
+	str	r9,[r11,#-4]
+	b	.L192_loop
+
+.Lnot192:
+#if __ARM_ARCH__<7
+	ldrb	r8,[r12,#27]
+	ldrb	r4,[r12,#26]
+	ldrb	r5,[r12,#25]
+	ldrb	r6,[r12,#24]
+	orr	r8,r8,r4,lsl#8
+	ldrb	r9,[r12,#31]
+	orr	r8,r8,r5,lsl#16
+	ldrb	r4,[r12,#30]
+	orr	r8,r8,r6,lsl#24
+	ldrb	r5,[r12,#29]
+	ldrb	r6,[r12,#28]
+	orr	r9,r9,r4,lsl#8
+	orr	r9,r9,r5,lsl#16
+	str	r8,[r11],#8
+	orr	r9,r9,r6,lsl#24
+	str	r9,[r11,#-4]
+#else
+	ldr	r8,[r12,#24]
+	ldr	r9,[r12,#28]
+#ifdef __ARMEL__
+	rev	r8,r8
+	rev	r9,r9
+#endif
+	str	r8,[r11],#8
+	str	r9,[r11,#-4]
+#endif
+
+	mov	r12,#14
+	str	r12,[r11,#240-32]
+	add	r6,r10,#256			@ rcon
+	mov	lr,#255
+	mov	r12,#7
+
+.L256_loop:
+	and	r5,lr,r9,lsr#24
+	and	r7,lr,r9,lsr#16
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r9,lsr#8
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r9
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#24
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r6],#4			@ rcon[i++]
+	orr	r5,r5,r9,lsl#8
+	eor	r9,r5,r4
+	eor	r0,r0,r9			@ rk[8]=rk[0]^...
+	eor	r1,r1,r0			@ rk[9]=rk[1]^rk[8]
+	str	r0,[r11],#32
+	eor	r2,r2,r1			@ rk[10]=rk[2]^rk[9]
+	str	r1,[r11,#-28]
+	eor	r3,r3,r2			@ rk[11]=rk[3]^rk[10]
+	str	r2,[r11,#-24]
+	subs	r12,r12,#1
+	str	r3,[r11,#-20]
+	subeq	r2,r11,#256
+	beq	.Ldone
+
+	and	r5,lr,r3
+	and	r7,lr,r3,lsr#8
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r3,lsr#16
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r3,lsr#24
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#8
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r11,#-48]
+	orr	r5,r5,r9,lsl#24
+
+	ldr	r7,[r11,#-44]
+	ldr	r8,[r11,#-40]
+	eor	r4,r4,r5			@ rk[12]=rk[4]^...
+	ldr	r9,[r11,#-36]
+	eor	r7,r7,r4			@ rk[13]=rk[5]^rk[12]
+	str	r4,[r11,#-16]
+	eor	r8,r8,r7			@ rk[14]=rk[6]^rk[13]
+	str	r7,[r11,#-12]
+	eor	r9,r9,r8			@ rk[15]=rk[7]^rk[14]
+	str	r8,[r11,#-8]
+	str	r9,[r11,#-4]
+	b	.L256_loop
+
+.Ldone:	mov	r0,#0
+	ldmia   sp!,{r4-r12,lr}
+.Labrt:	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+.size	private_AES_set_encrypt_key,.-private_AES_set_encrypt_key
+
+.global private_AES_set_decrypt_key
+.type   private_AES_set_decrypt_key,%function
+.align	5
+private_AES_set_decrypt_key:
+	str	lr,[sp,#-4]!            @ push lr
+#if 0
+	@ kernel does both of these in setkey so optimise this bit out by
+	@ expecting the key to already have the enc_key work done (see aes_glue.c)
+	bl	_armv4_AES_set_encrypt_key
+#else
+	mov	r0,#0
+#endif
+	teq	r0,#0
+	ldrne	lr,[sp],#4              @ pop lr
+	bne	.Labrt
+
+	stmdb   sp!,{r4-r12}
+
+	ldr	r12,[r2,#240]	@ AES_set_encrypt_key preserves r2,
+	mov	r11,r2			@ which is AES_KEY *key
+	mov	r7,r2
+	add	r8,r2,r12,lsl#4
+
+.Linv:	ldr	r0,[r7]
+	ldr	r1,[r7,#4]
+	ldr	r2,[r7,#8]
+	ldr	r3,[r7,#12]
+	ldr	r4,[r8]
+	ldr	r5,[r8,#4]
+	ldr	r6,[r8,#8]
+	ldr	r9,[r8,#12]
+	str	r0,[r8],#-16
+	str	r1,[r8,#16+4]
+	str	r2,[r8,#16+8]
+	str	r3,[r8,#16+12]
+	str	r4,[r7],#16
+	str	r5,[r7,#-12]
+	str	r6,[r7,#-8]
+	str	r9,[r7,#-4]
+	teq	r7,r8
+	bne	.Linv
+	ldr	r0,[r11,#16]!		@ prefetch tp1
+	mov	r7,#0x80
+	mov	r8,#0x1b
+	orr	r7,r7,#0x8000
+	orr	r8,r8,#0x1b00
+	orr	r7,r7,r7,lsl#16
+	orr	r8,r8,r8,lsl#16
+	sub	r12,r12,#1
+	mvn	r9,r7
+	mov	r12,r12,lsl#2	@ (rounds-1)*4
+
+.Lmix:	and	r4,r0,r7
+	and	r1,r0,r9
+	sub	r4,r4,r4,lsr#7
+	and	r4,r4,r8
+	eor	r1,r4,r1,lsl#1	@ tp2
+
+	and	r4,r1,r7
+	and	r2,r1,r9
+	sub	r4,r4,r4,lsr#7
+	and	r4,r4,r8
+	eor	r2,r4,r2,lsl#1	@ tp4
+
+	and	r4,r2,r7
+	and	r3,r2,r9
+	sub	r4,r4,r4,lsr#7
+	and	r4,r4,r8
+	eor	r3,r4,r3,lsl#1	@ tp8
+
+	eor	r4,r1,r2
+	eor	r5,r0,r3		@ tp9
+	eor	r4,r4,r3		@ tpe
+	eor	r4,r4,r1,ror#24
+	eor	r4,r4,r5,ror#24	@ ^= ROTATE(tpb=tp9^tp2,8)
+	eor	r4,r4,r2,ror#16
+	eor	r4,r4,r5,ror#16	@ ^= ROTATE(tpd=tp9^tp4,16)
+	eor	r4,r4,r5,ror#8	@ ^= ROTATE(tp9,24)
+
+	ldr	r0,[r11,#4]		@ prefetch tp1
+	str	r4,[r11],#4
+	subs	r12,r12,#1
+	bne	.Lmix
+
+	mov	r0,#0
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia   sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.size	private_AES_set_decrypt_key,.-private_AES_set_decrypt_key
+
+.type	AES_Td,%object
+.align	5
+AES_Td:
+.word	0x51f4a750, 0x7e416553, 0x1a17a4c3, 0x3a275e96
+.word	0x3bab6bcb, 0x1f9d45f1, 0xacfa58ab, 0x4be30393
+.word	0x2030fa55, 0xad766df6, 0x88cc7691, 0xf5024c25
+.word	0x4fe5d7fc, 0xc52acbd7, 0x26354480, 0xb562a38f
+.word	0xdeb15a49, 0x25ba1b67, 0x45ea0e98, 0x5dfec0e1
+.word	0xc32f7502, 0x814cf012, 0x8d4697a3, 0x6bd3f9c6
+.word	0x038f5fe7, 0x15929c95, 0xbf6d7aeb, 0x955259da
+.word	0xd4be832d, 0x587421d3, 0x49e06929, 0x8ec9c844
+.word	0x75c2896a, 0xf48e7978, 0x99583e6b, 0x27b971dd
+.word	0xbee14fb6, 0xf088ad17, 0xc920ac66, 0x7dce3ab4
+.word	0x63df4a18, 0xe51a3182, 0x97513360, 0x62537f45
+.word	0xb16477e0, 0xbb6bae84, 0xfe81a01c, 0xf9082b94
+.word	0x70486858, 0x8f45fd19, 0x94de6c87, 0x527bf8b7
+.word	0xab73d323, 0x724b02e2, 0xe31f8f57, 0x6655ab2a
+.word	0xb2eb2807, 0x2fb5c203, 0x86c57b9a, 0xd33708a5
+.word	0x302887f2, 0x23bfa5b2, 0x02036aba, 0xed16825c
+.word	0x8acf1c2b, 0xa779b492, 0xf307f2f0, 0x4e69e2a1
+.word	0x65daf4cd, 0x0605bed5, 0xd134621f, 0xc4a6fe8a
+.word	0x342e539d, 0xa2f355a0, 0x058ae132, 0xa4f6eb75
+.word	0x0b83ec39, 0x4060efaa, 0x5e719f06, 0xbd6e1051
+.word	0x3e218af9, 0x96dd063d, 0xdd3e05ae, 0x4de6bd46
+.word	0x91548db5, 0x71c45d05, 0x0406d46f, 0x605015ff
+.word	0x1998fb24, 0xd6bde997, 0x894043cc, 0x67d99e77
+.word	0xb0e842bd, 0x07898b88, 0xe7195b38, 0x79c8eedb
+.word	0xa17c0a47, 0x7c420fe9, 0xf8841ec9, 0x00000000
+.word	0x09808683, 0x322bed48, 0x1e1170ac, 0x6c5a724e
+.word	0xfd0efffb, 0x0f853856, 0x3daed51e, 0x362d3927
+.word	0x0a0fd964, 0x685ca621, 0x9b5b54d1, 0x24362e3a
+.word	0x0c0a67b1, 0x9357e70f, 0xb4ee96d2, 0x1b9b919e
+.word	0x80c0c54f, 0x61dc20a2, 0x5a774b69, 0x1c121a16
+.word	0xe293ba0a, 0xc0a02ae5, 0x3c22e043, 0x121b171d
+.word	0x0e090d0b, 0xf28bc7ad, 0x2db6a8b9, 0x141ea9c8
+.word	0x57f11985, 0xaf75074c, 0xee99ddbb, 0xa37f60fd
+.word	0xf701269f, 0x5c72f5bc, 0x44663bc5, 0x5bfb7e34
+.word	0x8b432976, 0xcb23c6dc, 0xb6edfc68, 0xb8e4f163
+.word	0xd731dcca, 0x42638510, 0x13972240, 0x84c61120
+.word	0x854a247d, 0xd2bb3df8, 0xaef93211, 0xc729a16d
+.word	0x1d9e2f4b, 0xdcb230f3, 0x0d8652ec, 0x77c1e3d0
+.word	0x2bb3166c, 0xa970b999, 0x119448fa, 0x47e96422
+.word	0xa8fc8cc4, 0xa0f03f1a, 0x567d2cd8, 0x223390ef
+.word	0x87494ec7, 0xd938d1c1, 0x8ccaa2fe, 0x98d40b36
+.word	0xa6f581cf, 0xa57ade28, 0xdab78e26, 0x3fadbfa4
+.word	0x2c3a9de4, 0x5078920d, 0x6a5fcc9b, 0x547e4662
+.word	0xf68d13c2, 0x90d8b8e8, 0x2e39f75e, 0x82c3aff5
+.word	0x9f5d80be, 0x69d0937c, 0x6fd52da9, 0xcf2512b3
+.word	0xc8ac993b, 0x10187da7, 0xe89c636e, 0xdb3bbb7b
+.word	0xcd267809, 0x6e5918f4, 0xec9ab701, 0x834f9aa8
+.word	0xe6956e65, 0xaaffe67e, 0x21bccf08, 0xef15e8e6
+.word	0xbae79bd9, 0x4a6f36ce, 0xea9f09d4, 0x29b07cd6
+.word	0x31a4b2af, 0x2a3f2331, 0xc6a59430, 0x35a266c0
+.word	0x744ebc37, 0xfc82caa6, 0xe090d0b0, 0x33a7d815
+.word	0xf104984a, 0x41ecdaf7, 0x7fcd500e, 0x1791f62f
+.word	0x764dd68d, 0x43efb04d, 0xccaa4d54, 0xe49604df
+.word	0x9ed1b5e3, 0x4c6a881b, 0xc12c1fb8, 0x4665517f
+.word	0x9d5eea04, 0x018c355d, 0xfa877473, 0xfb0b412e
+.word	0xb3671d5a, 0x92dbd252, 0xe9105633, 0x6dd64713
+.word	0x9ad7618c, 0x37a10c7a, 0x59f8148e, 0xeb133c89
+.word	0xcea927ee, 0xb761c935, 0xe11ce5ed, 0x7a47b13c
+.word	0x9cd2df59, 0x55f2733f, 0x1814ce79, 0x73c737bf
+.word	0x53f7cdea, 0x5ffdaa5b, 0xdf3d6f14, 0x7844db86
+.word	0xcaaff381, 0xb968c43e, 0x3824342c, 0xc2a3405f
+.word	0x161dc372, 0xbce2250c, 0x283c498b, 0xff0d9541
+.word	0x39a80171, 0x080cb3de, 0xd8b4e49c, 0x6456c190
+.word	0x7bcb8461, 0xd532b670, 0x486c5c74, 0xd0b85742
+@ Td4[256]
+.byte	0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38
+.byte	0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb
+.byte	0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87
+.byte	0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb
+.byte	0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d
+.byte	0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e
+.byte	0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2
+.byte	0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25
+.byte	0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16
+.byte	0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92
+.byte	0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda
+.byte	0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84
+.byte	0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a
+.byte	0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06
+.byte	0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02
+.byte	0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b
+.byte	0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea
+.byte	0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73
+.byte	0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85
+.byte	0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e
+.byte	0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89
+.byte	0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b
+.byte	0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20
+.byte	0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4
+.byte	0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31
+.byte	0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f
+.byte	0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d
+.byte	0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef
+.byte	0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0
+.byte	0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61
+.byte	0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26
+.byte	0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d
+.size	AES_Td,.-AES_Td
+
+@ void AES_decrypt(const unsigned char *in, unsigned char *out,
+@ 		 const AES_KEY *key) {
+.global AES_decrypt
+.type   AES_decrypt,%function
+.align	5
+AES_decrypt:
+	sub	r3,pc,#8		@ AES_decrypt
+	stmdb   sp!,{r1,r4-r12,lr}
+	mov	r12,r0		@ inp
+	mov	r11,r2
+	sub	r10,r3,#AES_decrypt-AES_Td		@ Td
+#if __ARM_ARCH__<7
+	ldrb	r0,[r12,#3]	@ load input data in endian-neutral
+	ldrb	r4,[r12,#2]	@ manner...
+	ldrb	r5,[r12,#1]
+	ldrb	r6,[r12,#0]
+	orr	r0,r0,r4,lsl#8
+	ldrb	r1,[r12,#7]
+	orr	r0,r0,r5,lsl#16
+	ldrb	r4,[r12,#6]
+	orr	r0,r0,r6,lsl#24
+	ldrb	r5,[r12,#5]
+	ldrb	r6,[r12,#4]
+	orr	r1,r1,r4,lsl#8
+	ldrb	r2,[r12,#11]
+	orr	r1,r1,r5,lsl#16
+	ldrb	r4,[r12,#10]
+	orr	r1,r1,r6,lsl#24
+	ldrb	r5,[r12,#9]
+	ldrb	r6,[r12,#8]
+	orr	r2,r2,r4,lsl#8
+	ldrb	r3,[r12,#15]
+	orr	r2,r2,r5,lsl#16
+	ldrb	r4,[r12,#14]
+	orr	r2,r2,r6,lsl#24
+	ldrb	r5,[r12,#13]
+	ldrb	r6,[r12,#12]
+	orr	r3,r3,r4,lsl#8
+	orr	r3,r3,r5,lsl#16
+	orr	r3,r3,r6,lsl#24
+#else
+	ldr	r0,[r12,#0]
+	ldr	r1,[r12,#4]
+	ldr	r2,[r12,#8]
+	ldr	r3,[r12,#12]
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+#endif
+	bl	_armv4_AES_decrypt
+
+	ldr	r12,[sp],#4		@ pop out
+#if __ARM_ARCH__>=7
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+	str	r0,[r12,#0]
+	str	r1,[r12,#4]
+	str	r2,[r12,#8]
+	str	r3,[r12,#12]
+#else
+	mov	r4,r0,lsr#24		@ write output in endian-neutral
+	mov	r5,r0,lsr#16		@ manner...
+	mov	r6,r0,lsr#8
+	strb	r4,[r12,#0]
+	strb	r5,[r12,#1]
+	mov	r4,r1,lsr#24
+	strb	r6,[r12,#2]
+	mov	r5,r1,lsr#16
+	strb	r0,[r12,#3]
+	mov	r6,r1,lsr#8
+	strb	r4,[r12,#4]
+	strb	r5,[r12,#5]
+	mov	r4,r2,lsr#24
+	strb	r6,[r12,#6]
+	mov	r5,r2,lsr#16
+	strb	r1,[r12,#7]
+	mov	r6,r2,lsr#8
+	strb	r4,[r12,#8]
+	strb	r5,[r12,#9]
+	mov	r4,r3,lsr#24
+	strb	r6,[r12,#10]
+	mov	r5,r3,lsr#16
+	strb	r2,[r12,#11]
+	mov	r6,r3,lsr#8
+	strb	r4,[r12,#12]
+	strb	r5,[r12,#13]
+	strb	r6,[r12,#14]
+	strb	r3,[r12,#15]
+#endif
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia   sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.size	AES_decrypt,.-AES_decrypt
+
+.type   _armv4_AES_decrypt,%function
+.align	2
+_armv4_AES_decrypt:
+	str	lr,[sp,#-4]!		@ push lr
+	ldmia	r11!,{r4-r7}
+	eor	r0,r0,r4
+	ldr	r12,[r11,#240-16]
+	eor	r1,r1,r5
+	eor	r2,r2,r6
+	eor	r3,r3,r7
+	sub	r12,r12,#1
+	mov	lr,#255
+
+	and	r7,lr,r0,lsr#16
+	and	r8,lr,r0,lsr#8
+	and	r9,lr,r0
+	mov	r0,r0,lsr#24
+.Ldec_loop:
+	ldr	r4,[r10,r7,lsl#2]	@ Td1[s0>>16]
+	and	r7,lr,r1		@ i0
+	ldr	r5,[r10,r8,lsl#2]	@ Td2[s0>>8]
+	and	r8,lr,r1,lsr#16
+	ldr	r6,[r10,r9,lsl#2]	@ Td3[s0>>0]
+	and	r9,lr,r1,lsr#8
+	ldr	r0,[r10,r0,lsl#2]	@ Td0[s0>>24]
+	mov	r1,r1,lsr#24
+
+	ldr	r7,[r10,r7,lsl#2]	@ Td3[s1>>0]
+	ldr	r8,[r10,r8,lsl#2]	@ Td1[s1>>16]
+	ldr	r9,[r10,r9,lsl#2]	@ Td2[s1>>8]
+	eor	r0,r0,r7,ror#24
+	ldr	r1,[r10,r1,lsl#2]	@ Td0[s1>>24]
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r8,r5,ror#8
+	and	r8,lr,r2		@ i1
+	eor	r6,r9,r6,ror#8
+	and	r9,lr,r2,lsr#16
+	ldr	r7,[r10,r7,lsl#2]	@ Td2[s2>>8]
+	eor	r1,r1,r4,ror#8
+	ldr	r8,[r10,r8,lsl#2]	@ Td3[s2>>0]
+	mov	r2,r2,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Td1[s2>>16]
+	eor	r0,r0,r7,ror#16
+	ldr	r2,[r10,r2,lsl#2]	@ Td0[s2>>24]
+	and	r7,lr,r3,lsr#16	@ i0
+	eor	r1,r1,r8,ror#24
+	and	r8,lr,r3,lsr#8	@ i1
+	eor	r6,r9,r6,ror#8
+	and	r9,lr,r3		@ i2
+	ldr	r7,[r10,r7,lsl#2]	@ Td1[s3>>16]
+	eor	r2,r2,r5,ror#8
+	ldr	r8,[r10,r8,lsl#2]	@ Td2[s3>>8]
+	mov	r3,r3,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Td3[s3>>0]
+	eor	r0,r0,r7,ror#8
+	ldr	r7,[r11],#16
+	eor	r1,r1,r8,ror#16
+	ldr	r3,[r10,r3,lsl#2]	@ Td0[s3>>24]
+	eor	r2,r2,r9,ror#24
+
+	ldr	r4,[r11,#-12]
+	eor	r0,r0,r7
+	ldr	r5,[r11,#-8]
+	eor	r3,r3,r6,ror#8
+	ldr	r6,[r11,#-4]
+	and	r7,lr,r0,lsr#16
+	eor	r1,r1,r4
+	and	r8,lr,r0,lsr#8
+	eor	r2,r2,r5
+	and	r9,lr,r0
+	eor	r3,r3,r6
+	mov	r0,r0,lsr#24
+
+	subs	r12,r12,#1
+	bne	.Ldec_loop
+
+	add	r10,r10,#1024
+
+	ldr	r5,[r10,#0]		@ prefetch Td4
+	ldr	r6,[r10,#32]
+	ldr	r4,[r10,#64]
+	ldr	r5,[r10,#96]
+	ldr	r6,[r10,#128]
+	ldr	r4,[r10,#160]
+	ldr	r5,[r10,#192]
+	ldr	r6,[r10,#224]
+
+	ldrb	r0,[r10,r0]		@ Td4[s0>>24]
+	ldrb	r4,[r10,r7]		@ Td4[s0>>16]
+	and	r7,lr,r1		@ i0
+	ldrb	r5,[r10,r8]		@ Td4[s0>>8]
+	and	r8,lr,r1,lsr#16
+	ldrb	r6,[r10,r9]		@ Td4[s0>>0]
+	and	r9,lr,r1,lsr#8
+
+	ldrb	r7,[r10,r7]		@ Td4[s1>>0]
+	ldrb	r1,[r10,r1,lsr#24]	@ Td4[s1>>24]
+	ldrb	r8,[r10,r8]		@ Td4[s1>>16]
+	eor	r0,r7,r0,lsl#24
+	ldrb	r9,[r10,r9]		@ Td4[s1>>8]
+	eor	r1,r4,r1,lsl#8
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r5,r8,lsl#8
+	and	r8,lr,r2		@ i1
+	ldrb	r7,[r10,r7]		@ Td4[s2>>8]
+	eor	r6,r6,r9,lsl#8
+	ldrb	r8,[r10,r8]		@ Td4[s2>>0]
+	and	r9,lr,r2,lsr#16
+
+	ldrb	r2,[r10,r2,lsr#24]	@ Td4[s2>>24]
+	eor	r0,r0,r7,lsl#8
+	ldrb	r9,[r10,r9]		@ Td4[s2>>16]
+	eor	r1,r8,r1,lsl#16
+	and	r7,lr,r3,lsr#16	@ i0
+	eor	r2,r5,r2,lsl#16
+	and	r8,lr,r3,lsr#8	@ i1
+	ldrb	r7,[r10,r7]		@ Td4[s3>>16]
+	eor	r6,r6,r9,lsl#16
+	ldrb	r8,[r10,r8]		@ Td4[s3>>8]
+	and	r9,lr,r3		@ i2
+
+	ldrb	r9,[r10,r9]		@ Td4[s3>>0]
+	ldrb	r3,[r10,r3,lsr#24]	@ Td4[s3>>24]
+	eor	r0,r0,r7,lsl#16
+	ldr	r7,[r11,#0]
+	eor	r1,r1,r8,lsl#8
+	ldr	r4,[r11,#4]
+	eor	r2,r9,r2,lsl#8
+	ldr	r5,[r11,#8]
+	eor	r3,r6,r3,lsl#24
+	ldr	r6,[r11,#12]
+
+	eor	r0,r0,r7
+	eor	r1,r1,r4
+	eor	r2,r2,r5
+	eor	r3,r3,r6
+
+	sub	r10,r10,#1024
+	ldr	pc,[sp],#4		@ pop and return
+.size	_armv4_AES_decrypt,.-_armv4_AES_decrypt
+.asciz	"AES for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
+.align	2
diff -druN linux-libre-3.6-gnu/arch/arm/crypto/aes_glue.c linux-libre-3.7-gnu/arch/arm/crypto/aes_glue.c
--- linux-libre-3.6-gnu/arch/arm/crypto/aes_glue.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/crypto/aes_glue.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,108 @@
+/*
+ * Glue Code for the asm optimized version of the AES Cipher Algorithm
+ */
+
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <crypto/aes.h>
+
+#define AES_MAXNR 14
+
+typedef struct {
+	unsigned int rd_key[4 *(AES_MAXNR + 1)];
+	int rounds;
+} AES_KEY;
+
+struct AES_CTX {
+	AES_KEY enc_key;
+	AES_KEY dec_key;
+};
+
+asmlinkage void AES_encrypt(const u8 *in, u8 *out, AES_KEY *ctx);
+asmlinkage void AES_decrypt(const u8 *in, u8 *out, AES_KEY *ctx);
+asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+
+static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
+	AES_encrypt(src, dst, &ctx->enc_key);
+}
+
+static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
+	AES_decrypt(src, dst, &ctx->dec_key);
+}
+
+static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+		unsigned int key_len)
+{
+	struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		key_len = 128;
+		break;
+	case AES_KEYSIZE_192:
+		key_len = 192;
+		break;
+	case AES_KEYSIZE_256:
+		key_len = 256;
+		break;
+	default:
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	if (private_AES_set_encrypt_key(in_key, key_len, &ctx->enc_key) == -1) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	/* private_AES_set_decrypt_key expects an encryption key as input */
+	ctx->dec_key = ctx->enc_key;
+	if (private_AES_set_decrypt_key(in_key, key_len, &ctx->dec_key) == -1) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct crypto_alg aes_alg = {
+	.cra_name		= "aes",
+	.cra_driver_name	= "aes-asm",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct AES_CTX),
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(aes_alg.cra_list),
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= AES_MIN_KEY_SIZE,
+			.cia_max_keysize	= AES_MAX_KEY_SIZE,
+			.cia_setkey			= aes_set_key,
+			.cia_encrypt		= aes_encrypt,
+			.cia_decrypt		= aes_decrypt
+		}
+	}
+};
+
+static int __init aes_init(void)
+{
+	return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_fini(void)
+{
+	crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-asm");
+MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
diff -druN linux-libre-3.6-gnu/arch/arm/crypto/Makefile linux-libre-3.7-gnu/arch/arm/crypto/Makefile
--- linux-libre-3.6-gnu/arch/arm/crypto/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/crypto/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,9 @@
+#
+# Arch-specific CryptoAPI modules.
+#
+
+obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
+obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
+
+aes-arm-y  := aes-armv4.o aes_glue.o
+sha1-arm-y := sha1-armv4-large.o sha1_glue.o
diff -druN linux-libre-3.6-gnu/arch/arm/crypto/sha1-armv4-large.S linux-libre-3.7-gnu/arch/arm/crypto/sha1-armv4-large.S
--- linux-libre-3.6-gnu/arch/arm/crypto/sha1-armv4-large.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/crypto/sha1-armv4-large.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,503 @@
+#define __ARM_ARCH__ __LINUX_ARM_ARCH__
+@ ====================================================================
+@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+@ project. The module is, however, dual licensed under OpenSSL and
+@ CRYPTOGAMS licenses depending on where you obtain it. For further
+@ details see http://www.openssl.org/~appro/cryptogams/.
+@ ====================================================================
+
+@ sha1_block procedure for ARMv4.
+@
+@ January 2007.
+
+@ Size/performance trade-off
+@ ====================================================================
+@ impl		size in bytes	comp cycles[*]	measured performance
+@ ====================================================================
+@ thumb		304		3212		4420
+@ armv4-small	392/+29%	1958/+64%	2250/+96%
+@ armv4-compact	740/+89%	1552/+26%	1840/+22%
+@ armv4-large	1420/+92%	1307/+19%	1370/+34%[***]
+@ full unroll	~5100/+260%	~1260/+4%	~1300/+5%
+@ ====================================================================
+@ thumb		= same as 'small' but in Thumb instructions[**] and
+@		  with recurring code in two private functions;
+@ small		= detached Xload/update, loops are folded;
+@ compact	= detached Xload/update, 5x unroll;
+@ large		= interleaved Xload/update, 5x unroll;
+@ full unroll	= interleaved Xload/update, full unroll, estimated[!];
+@
+@ [*]	Manually counted instructions in "grand" loop body. Measured
+@	performance is affected by prologue and epilogue overhead,
+@	i-cache availability, branch penalties, etc.
+@ [**]	While each Thumb instruction is twice smaller, they are not as
+@	diverse as ARM ones: e.g., there are only two arithmetic
+@	instructions with 3 arguments, no [fixed] rotate, addressing
+@	modes are limited. As result it takes more instructions to do
+@	the same job in Thumb, therefore the code is never twice as
+@	small and always slower.
+@ [***]	which is also ~35% better than compiler generated code. Dual-
+@	issue Cortex A8 core was measured to process input block in
+@	~990 cycles.
+
+@ August 2010.
+@
+@ Rescheduling for dual-issue pipeline resulted in 13% improvement on
+@ Cortex A8 core and in absolute terms ~870 cycles per input block
+@ [or 13.6 cycles per byte].
+
+@ February 2011.
+@
+@ Profiler-assisted and platform-specific optimization resulted in 10%
+@ improvement on Cortex A8 core and 12.2 cycles per byte.
+
+.text
+
+.global	sha1_block_data_order
+.type	sha1_block_data_order,%function
+
+.align	2
+sha1_block_data_order:
+	stmdb	sp!,{r4-r12,lr}
+	add	r2,r1,r2,lsl#6	@ r2 to point at the end of r1
+	ldmia	r0,{r3,r4,r5,r6,r7}
+.Lloop:
+	ldr	r8,.LK_00_19
+	mov	r14,sp
+	sub	sp,sp,#15*4
+	mov	r5,r5,ror#30
+	mov	r6,r6,ror#30
+	mov	r7,r7,ror#30		@ [6]
+.L_00_15:
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r5,r6			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	eor	r10,r5,r6			@ F_xx_xx
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r4,r10,ror#2
+	add	r7,r7,r9			@ E+=X[i]
+	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r6,r8,r6,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r4,r5			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r6,r8,r6,ror#2			@ E+=K_00_19
+	eor	r10,r4,r5			@ F_xx_xx
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r3,r10,ror#2
+	add	r6,r6,r9			@ E+=X[i]
+	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r5,r8,r5,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r3,r4			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r5,r8,r5,ror#2			@ E+=K_00_19
+	eor	r10,r3,r4			@ F_xx_xx
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r7,r10,ror#2
+	add	r5,r5,r9			@ E+=X[i]
+	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r4,r8,r4,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r7,r3			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r4,r8,r4,ror#2			@ E+=K_00_19
+	eor	r10,r7,r3			@ F_xx_xx
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r6,r10,ror#2
+	add	r4,r4,r9			@ E+=X[i]
+	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r3,r8,r3,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r6,r7			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r3,r8,r3,ror#2			@ E+=K_00_19
+	eor	r10,r6,r7			@ F_xx_xx
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r5,r10,ror#2
+	add	r3,r3,r9			@ E+=X[i]
+	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
+	teq	r14,sp
+	bne	.L_00_15		@ [((11+4)*5+2)*3]
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r5,r6			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	eor	r10,r5,r6			@ F_xx_xx
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r4,r10,ror#2
+	add	r7,r7,r9			@ E+=X[i]
+	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r3,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
+	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r7,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
+	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r6,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
+	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r5,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
+	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
+
+	ldr	r8,.LK_20_39		@ [+15+16*4]
+	sub	sp,sp,#25*4
+	cmn	sp,#0			@ [+3], clear carry to denote 20_39
+.L_20_39_or_60_79:
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r5,r6			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r4,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r7,r7,r9			@ E+=X[i]
+	add	r7,r7,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r3,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	add	r6,r6,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r7,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	add	r5,r5,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r6,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	add	r4,r4,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r5,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	add	r3,r3,r10			@ E+=F_20_39(B,C,D)
+	teq	r14,sp			@ preserve carry
+	bne	.L_20_39_or_60_79	@ [+((12+3)*5+2)*4]
+	bcs	.L_done			@ [+((12+3)*5+2)*4], spare 300 bytes
+
+	ldr	r8,.LK_40_59
+	sub	sp,sp,#20*4		@ [+2]
+.L_40_59:
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r5,r6			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r4,r10,ror#2					@ F_xx_xx
+	and r11,r5,r6					@ F_xx_xx
+	add	r7,r7,r9			@ E+=X[i]
+	add	r7,r7,r10			@ E+=F_40_59(B,C,D)
+	add	r7,r7,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r3,r10,ror#2					@ F_xx_xx
+	and r11,r4,r5					@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	add	r6,r6,r10			@ E+=F_40_59(B,C,D)
+	add	r6,r6,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r7,r10,ror#2					@ F_xx_xx
+	and r11,r3,r4					@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	add	r5,r5,r10			@ E+=F_40_59(B,C,D)
+	add	r5,r5,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r6,r10,ror#2					@ F_xx_xx
+	and r11,r7,r3					@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	add	r4,r4,r10			@ E+=F_40_59(B,C,D)
+	add	r4,r4,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r5,r10,ror#2					@ F_xx_xx
+	and r11,r6,r7					@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	add	r3,r3,r10			@ E+=F_40_59(B,C,D)
+	add	r3,r3,r11,ror#2
+	teq	r14,sp
+	bne	.L_40_59		@ [+((12+5)*5+2)*4]
+
+	ldr	r8,.LK_60_79
+	sub	sp,sp,#20*4
+	cmp	sp,#0			@ set carry to denote 60_79
+	b	.L_20_39_or_60_79	@ [+4], spare 300 bytes
+.L_done:
+	add	sp,sp,#80*4		@ "deallocate" stack frame
+	ldmia	r0,{r8,r9,r10,r11,r12}
+	add	r3,r8,r3
+	add	r4,r9,r4
+	add	r5,r10,r5,ror#2
+	add	r6,r11,r6,ror#2
+	add	r7,r12,r7,ror#2
+	stmia	r0,{r3,r4,r5,r6,r7}
+	teq	r1,r2
+	bne	.Lloop			@ [+18], total 1307
+
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia	sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.align	2
+.LK_00_19:	.word	0x5a827999
+.LK_20_39:	.word	0x6ed9eba1
+.LK_40_59:	.word	0x8f1bbcdc
+.LK_60_79:	.word	0xca62c1d6
+.size	sha1_block_data_order,.-sha1_block_data_order
+.asciz	"SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
+.align	2
diff -druN linux-libre-3.6-gnu/arch/arm/crypto/sha1_glue.c linux-libre-3.7-gnu/arch/arm/crypto/sha1_glue.c
--- linux-libre-3.6-gnu/arch/arm/crypto/sha1_glue.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/crypto/sha1_glue.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,179 @@
+/*
+ * Cryptographic API.
+ * Glue code for the SHA1 Secure Hash Algorithm assembler implementation
+ *
+ * This file is based on sha1_generic.c and sha1_ssse3_glue.c
+ *
+ * Copyright (c) Alan Smithee.
+ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
+ * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
+ * Copyright (c) Mathias Krause <minipli@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <crypto/sha.h>
+#include <asm/byteorder.h>
+
+struct SHA1_CTX {
+	uint32_t h0,h1,h2,h3,h4;
+	u64 count;
+	u8 data[SHA1_BLOCK_SIZE];
+};
+
+asmlinkage void sha1_block_data_order(struct SHA1_CTX *digest,
+		const unsigned char *data, unsigned int rounds);
+
+
+static int sha1_init(struct shash_desc *desc)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	memset(sctx, 0, sizeof(*sctx));
+	sctx->h0 = SHA1_H0;
+	sctx->h1 = SHA1_H1;
+	sctx->h2 = SHA1_H2;
+	sctx->h3 = SHA1_H3;
+	sctx->h4 = SHA1_H4;
+	return 0;
+}
+
+
+static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data,
+			       unsigned int len, unsigned int partial)
+{
+	unsigned int done = 0;
+
+	sctx->count += len;
+
+	if (partial) {
+		done = SHA1_BLOCK_SIZE - partial;
+		memcpy(sctx->data + partial, data, done);
+		sha1_block_data_order(sctx, sctx->data, 1);
+	}
+
+	if (len - done >= SHA1_BLOCK_SIZE) {
+		const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE;
+		sha1_block_data_order(sctx, data + done, rounds);
+		done += rounds * SHA1_BLOCK_SIZE;
+	}
+
+	memcpy(sctx->data, data + done, len - done);
+	return 0;
+}
+
+
+static int sha1_update(struct shash_desc *desc, const u8 *data,
+			     unsigned int len)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	unsigned int partial = sctx->count % SHA1_BLOCK_SIZE;
+	int res;
+
+	/* Handle the fast case right here */
+	if (partial + len < SHA1_BLOCK_SIZE) {
+		sctx->count += len;
+		memcpy(sctx->data + partial, data, len);
+		return 0;
+	}
+	res = __sha1_update(sctx, data, len, partial);
+	return res;
+}
+
+
+/* Add padding and return the message digest. */
+static int sha1_final(struct shash_desc *desc, u8 *out)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	unsigned int i, index, padlen;
+	__be32 *dst = (__be32 *)out;
+	__be64 bits;
+	static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, };
+
+	bits = cpu_to_be64(sctx->count << 3);
+
+	/* Pad out to 56 mod 64 and append length */
+	index = sctx->count % SHA1_BLOCK_SIZE;
+	padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index);
+	/* We need to fill a whole block for __sha1_update() */
+	if (padlen <= 56) {
+		sctx->count += padlen;
+		memcpy(sctx->data + index, padding, padlen);
+	} else {
+		__sha1_update(sctx, padding, padlen, index);
+	}
+	__sha1_update(sctx, (const u8 *)&bits, sizeof(bits), 56);
+
+	/* Store state in digest */
+	for (i = 0; i < 5; i++)
+		dst[i] = cpu_to_be32(((u32 *)sctx)[i]);
+
+	/* Wipe context */
+	memset(sctx, 0, sizeof(*sctx));
+	return 0;
+}
+
+
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	memcpy(out, sctx, sizeof(*sctx));
+	return 0;
+}
+
+
+static int sha1_import(struct shash_desc *desc, const void *in)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	memcpy(sctx, in, sizeof(*sctx));
+	return 0;
+}
+
+
+static struct shash_alg alg = {
+	.digestsize	=	SHA1_DIGEST_SIZE,
+	.init		=	sha1_init,
+	.update		=	sha1_update,
+	.final		=	sha1_final,
+	.export		=	sha1_export,
+	.import		=	sha1_import,
+	.descsize	=	sizeof(struct SHA1_CTX),
+	.statesize	=	sizeof(struct SHA1_CTX),
+	.base		=	{
+		.cra_name	=	"sha1",
+		.cra_driver_name=	"sha1-asm",
+		.cra_priority	=	150,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA1_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+
+static int __init sha1_mod_init(void)
+{
+	return crypto_register_shash(&alg);
+}
+
+
+static void __exit sha1_mod_fini(void)
+{
+	crypto_unregister_shash(&alg);
+}
+
+
+module_init(sha1_mod_init);
+module_exit(sha1_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)");
+MODULE_ALIAS("sha1");
+MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/a.out.h linux-libre-3.7-gnu/arch/arm/include/asm/a.out.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/a.out.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/a.out.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <linux/types.h>
-
-struct exec
-{
-  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
-  __u32 a_text;		/* length of text, in bytes */
-  __u32 a_data;		/* length of data, in bytes */
-  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
-  __u32 a_syms;		/* length of symbol table data in file, in bytes */
-  __u32 a_entry;	/* start address */
-  __u32 a_trsize;	/* length of relocation info for text, in bytes */
-  __u32 a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a)	(0x00008000)
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT	(0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/arch_timer.h linux-libre-3.7-gnu/arch/arm/include/asm/arch_timer.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/arch_timer.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/arch_timer.h	2012-12-10 22:30:57.000000000 -0500
@@ -2,11 +2,12 @@
 #define __ASMARM_ARCH_TIMER_H
 
 #include <asm/errno.h>
+#include <linux/clocksource.h>
 
 #ifdef CONFIG_ARM_ARCH_TIMER
-#define ARCH_HAS_READ_CURRENT_TIMER
 int arch_timer_of_register(void);
 int arch_timer_sched_clock_init(void);
+struct timecounter *arch_timer_get_timecounter(void);
 #else
 static inline int arch_timer_of_register(void)
 {
@@ -17,6 +18,11 @@
 {
 	return -ENXIO;
 }
+
+static inline struct timecounter *arch_timer_get_timecounter(void)
+{
+	return NULL;
+}
 #endif
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/assembler.h linux-libre-3.7-gnu/arch/arm/include/asm/assembler.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/assembler.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/assembler.h	2012-12-10 22:30:57.000000000 -0500
@@ -22,6 +22,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/domain.h>
+#include <asm/opcodes-virt.h>
 
 #define IOMEM(x)	(x)
 
@@ -240,6 +241,34 @@
 #endif
 
 /*
+ * Helper macro to enter SVC mode cleanly and mask interrupts. reg is
+ * a scratch register for the macro to overwrite.
+ *
+ * This macro is intended for forcing the CPU into SVC mode at boot time.
+ * you cannot return to the original mode.
+ *
+ * Beware, it also clobers LR.
+ */
+.macro safe_svcmode_maskall reg:req
+	mrs	\reg , cpsr
+	mov	lr , \reg
+	and	lr , lr , #MODE_MASK
+	cmp	lr , #HYP_MODE
+	orr	\reg , \reg , #PSR_I_BIT | PSR_F_BIT
+	bic	\reg , \reg , #MODE_MASK
+	orr	\reg , \reg , #SVC_MODE
+THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
+	bne	1f
+	orr	\reg, \reg, #PSR_A_BIT
+	adr	lr, BSYM(2f)
+	msr	spsr_cxsf, \reg
+	__MSR_ELR_HYP(14)
+	__ERET
+1:	msr	cpsr_c, \reg
+2:
+.endm
+
+/*
  * STRT/LDRT access macros with ARM and Thumb-2 variants
  */
 #ifdef CONFIG_THUMB2_KERNEL
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/barrier.h linux-libre-3.7-gnu/arch/arm/include/asm/barrier.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/barrier.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/barrier.h	2012-12-10 22:30:57.000000000 -0500
@@ -44,10 +44,9 @@
 #define rmb()		dsb()
 #define wmb()		mb()
 #else
-#include <asm/memory.h>
-#define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define mb()		barrier()
+#define rmb()		barrier()
+#define wmb()		barrier()
 #endif
 
 #ifndef CONFIG_SMP
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/byteorder.h linux-libre-3.7-gnu/arch/arm/include/asm/byteorder.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/byteorder.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/byteorder.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,25 +0,0 @@
-/*
- *  arch/arm/include/asm/byteorder.h
- *
- * ARM Endian-ness.  In little endian mode, the data bus is connected such
- * that byte accesses appear as:
- *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- *
- * When in big endian mode, byte accesses appear as:
- *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- */
-#ifndef __ASM_ARM_BYTEORDER_H
-#define __ASM_ARM_BYTEORDER_H
-
-#ifdef __ARMEB__
-#include <linux/byteorder/big_endian.h>
-#else
-#include <linux/byteorder/little_endian.h>
-#endif
-
-#endif
-
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/cacheflush.h linux-libre-3.7-gnu/arch/arm/include/asm/cacheflush.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/cacheflush.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/cacheflush.h	2012-12-10 22:30:57.000000000 -0500
@@ -49,6 +49,13 @@
  *
  *		Unconditionally clean and invalidate the entire cache.
  *
+ *     flush_kern_louis()
+ *
+ *             Flush data cache levels up to the level of unification
+ *             inner shareable and invalidate the I-cache.
+ *             Only needed from v7 onwards, falls back to flush_cache_all()
+ *             for all other processor versions.
+ *
  *	flush_user_all()
  *
  *		Clean and invalidate all user space cache entries
@@ -97,6 +104,7 @@
 struct cpu_cache_fns {
 	void (*flush_icache_all)(void);
 	void (*flush_kern_all)(void);
+	void (*flush_kern_louis)(void);
 	void (*flush_user_all)(void);
 	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
 
@@ -119,6 +127,7 @@
 
 #define __cpuc_flush_icache_all		cpu_cache.flush_icache_all
 #define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
+#define __cpuc_flush_kern_louis		cpu_cache.flush_kern_louis
 #define __cpuc_flush_user_all		cpu_cache.flush_user_all
 #define __cpuc_flush_user_range		cpu_cache.flush_user_range
 #define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
@@ -139,6 +148,7 @@
 
 extern void __cpuc_flush_icache_all(void);
 extern void __cpuc_flush_kern_all(void);
+extern void __cpuc_flush_kern_louis(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
 extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
@@ -204,6 +214,11 @@
 	__flush_icache_preferred();
 }
 
+/*
+ * Flush caches up to Level of Unification Inner Shareable
+ */
+#define flush_cache_louis()		__cpuc_flush_kern_louis()
+
 #define flush_cache_all()		__cpuc_flush_kern_all()
 
 static inline void vivt_flush_cache_mm(struct mm_struct *mm)
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/current.h linux-libre-3.7-gnu/arch/arm/include/asm/current.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/current.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/current.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,15 +0,0 @@
-#ifndef _ASMARM_CURRENT_H
-#define _ASMARM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-static inline struct task_struct *get_current(void) __attribute_const__;
-
-static inline struct task_struct *get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current (get_current())
-
-#endif /* _ASMARM_CURRENT_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/delay.h linux-libre-3.7-gnu/arch/arm/include/asm/delay.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/delay.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/delay.h	2012-12-10 22:30:57.000000000 -0500
@@ -15,6 +15,11 @@
 
 #ifndef __ASSEMBLY__
 
+struct delay_timer {
+	unsigned long (*read_current_timer)(void);
+	unsigned long freq;
+};
+
 extern struct arm_delay_ops {
 	void (*delay)(unsigned long);
 	void (*const_udelay)(unsigned long);
@@ -56,6 +61,10 @@
 extern void __loop_udelay(unsigned long usecs);
 extern void __loop_const_udelay(unsigned long);
 
+/* Delay-loop timer registration. */
+#define ARCH_HAS_READ_CURRENT_TIMER
+extern void register_current_timer_delay(const struct delay_timer *timer);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* defined(_ARM_DELAY_H) */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/dma-mapping.h linux-libre-3.7-gnu/arch/arm/include/asm/dma-mapping.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/dma-mapping.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/dma-mapping.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,6 +13,7 @@
 
 #define DMA_ERROR_CODE	(~0)
 extern struct dma_map_ops arm_dma_ops;
+extern struct dma_map_ops arm_coherent_dma_ops;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/exec.h linux-libre-3.7-gnu/arch/arm/include/asm/exec.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/exec.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/exec.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARM_EXEC_H
-#define __ASM_ARM_EXEC_H
-
-#define arch_align_stack(x) (x)
-
-#endif /* __ASM_ARM_EXEC_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/fcntl.h linux-libre-3.7-gnu/arch/arm/include/asm/fcntl.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/fcntl.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/fcntl.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,11 +0,0 @@
-#ifndef _ARM_FCNTL_H
-#define _ARM_FCNTL_H
-
-#define O_DIRECTORY	 040000	/* must be a directory */
-#define O_NOFOLLOW	0100000	/* don't follow links */
-#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
-#define O_LARGEFILE	0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/flat.h linux-libre-3.7-gnu/arch/arm/include/asm/flat.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/flat.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/flat.h	2012-12-10 22:30:57.000000000 -0500
@@ -8,7 +8,7 @@
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp))
 #define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
 #define	flat_get_relocate_addr(rel)		(rel)
 #define	flat_set_persistent(relval, p)		0
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/glue-cache.h linux-libre-3.7-gnu/arch/arm/include/asm/glue-cache.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/glue-cache.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/glue-cache.h	2012-12-10 22:30:57.000000000 -0500
@@ -110,19 +110,19 @@
 #endif
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-//# ifdef _CACHE
+# ifdef _CACHE
 #  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v6
-//# endif
+# else
+#  define _CACHE v6
+# endif
 #endif
 
 #if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
+# ifdef _CACHE
 #  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v7
-//# endif
+# else
+#  define _CACHE v7
+# endif
 #endif
 
 #if !defined(_CACHE) && !defined(MULTI_CACHE)
@@ -132,6 +132,7 @@
 #ifndef MULTI_CACHE
 #define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
 #define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_kern_louis		__glue(_CACHE,_flush_kern_cache_louis)
 #define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
 #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
 #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/gpio.h linux-libre-3.7-gnu/arch/arm/include/asm/gpio.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/gpio.h	2012-12-10 22:30:57.000000000 -0500
@@ -6,7 +6,9 @@
 #endif
 
 /* not all ARM platforms necessarily support this API ... */
+#ifdef CONFIG_NEED_MACH_GPIO_H
 #include <mach/gpio.h>
+#endif
 
 #ifndef __ARM_GPIOLIB_COMPLEX
 /* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/hardirq.h linux-libre-3.7-gnu/arch/arm/include/asm/hardirq.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/hardirq.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/hardirq.h	2012-12-10 22:30:57.000000000 -0500
@@ -5,7 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	5
+#define NR_IPI	6
 
 typedef struct {
 	unsigned int __softirq_pending;
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/hardware/cache-tauros2.h linux-libre-3.7-gnu/arch/arm/include/asm/hardware/cache-tauros2.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/hardware/cache-tauros2.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/hardware/cache-tauros2.h	2012-12-10 22:30:57.000000000 -0500
@@ -8,4 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-extern void __init tauros2_init(void);
+#define CACHE_TAUROS2_PREFETCH_ON	(1 << 0)
+#define CACHE_TAUROS2_LINEFILL_BURST8	(1 << 1)
+
+extern void __init tauros2_init(unsigned int features);
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/hardware/iop3xx.h linux-libre-3.7-gnu/arch/arm/include/asm/hardware/iop3xx.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/hardware/iop3xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/hardware/iop3xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -217,18 +217,8 @@
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
 #define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
-#define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000
-#define IOP3XX_PCI_LOWER_IO_VA		0xfe000000
-#define IOP3XX_PCI_LOWER_IO_BA		0x90000000
-#define IOP3XX_PCI_UPPER_IO_PA		(IOP3XX_PCI_LOWER_IO_PA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_UPPER_IO_VA		(IOP3XX_PCI_LOWER_IO_VA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
-					IOP3XX_PCI_LOWER_IO_PA) +\
-					IOP3XX_PCI_LOWER_IO_VA)
-
+#define IOP3XX_PCI_LOWER_IO_BA		0x00000000
 
 #ifndef __ASSEMBLY__
 
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/hardware/linkup-l1110.h linux-libre-3.7-gnu/arch/arm/include/asm/hardware/linkup-l1110.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/hardware/linkup-l1110.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/hardware/linkup-l1110.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,48 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2	(1 << 1)
-#define LINKUP_PRS_S3	(1 << 2)
-#define LINKUP_PRS_S4	(1 << 3)
-#define LINKUP_PRS_BVD1	(1 << 4)
-#define LINKUP_PRS_BVD2	(1 << 5)
-#define LINKUP_PRS_VS1	(1 << 6)
-#define LINKUP_PRS_VS2	(1 << 7)
-#define LINKUP_PRS_RDY	(1 << 8)
-#define LINKUP_PRS_CD1	(1 << 9)
-#define LINKUP_PRS_CD2	(1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1	(1 << 0)
-#define LINKUP_PRC_S2	(1 << 1)
-#define LINKUP_PRC_S3	(1 << 2)
-#define LINKUP_PRC_S4	(1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
-
-struct linkup_l1110 {
-	volatile short prc;
-};
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/hwcap.h linux-libre-3.7-gnu/arch/arm/include/asm/hwcap.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/hwcap.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/hwcap.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,31 +1,8 @@
 #ifndef __ASMARM_HWCAP_H
 #define __ASMARM_HWCAP_H
 
-/*
- * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
- */
-#define HWCAP_SWP	(1 << 0)
-#define HWCAP_HALF	(1 << 1)
-#define HWCAP_THUMB	(1 << 2)
-#define HWCAP_26BIT	(1 << 3)	/* Play it safe */
-#define HWCAP_FAST_MULT	(1 << 4)
-#define HWCAP_FPA	(1 << 5)
-#define HWCAP_VFP	(1 << 6)
-#define HWCAP_EDSP	(1 << 7)
-#define HWCAP_JAVA	(1 << 8)
-#define HWCAP_IWMMXT	(1 << 9)
-#define HWCAP_CRUNCH	(1 << 10)
-#define HWCAP_THUMBEE	(1 << 11)
-#define HWCAP_NEON	(1 << 12)
-#define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
-#define HWCAP_TLS	(1 << 15)
-#define HWCAP_VFPv4	(1 << 16)
-#define HWCAP_IDIVA	(1 << 17)
-#define HWCAP_IDIVT	(1 << 18)
-#define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
+#include <uapi/asm/hwcap.h>
 
-#if defined(__KERNEL__)
 #if !defined(__ASSEMBLY__)
 /*
  * This yields a mask that user programs can use to figure out what
@@ -35,5 +12,3 @@
 extern unsigned int elf_hwcap;
 #endif
 #endif
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/hypervisor.h linux-libre-3.7-gnu/arch/arm/include/asm/hypervisor.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/hypervisor.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/hypervisor.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,6 @@
+#ifndef _ASM_ARM_HYPERVISOR_H
+#define _ASM_ARM_HYPERVISOR_H
+
+#include <asm/xen/hypervisor.h>
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/ioctls.h linux-libre-3.7-gnu/arch/arm/include/asm/ioctls.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/ioctls.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/ioctls.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,8 +0,0 @@
-#ifndef __ASM_ARM_IOCTLS_H
-#define __ASM_ARM_IOCTLS_H
-
-#define FIOQSIZE	0x545E
-
-#include <asm-generic/ioctls.h>
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/io.h linux-libre-3.7-gnu/arch/arm/include/asm/io.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/io.h	2012-12-10 22:30:57.000000000 -0500
@@ -47,13 +47,68 @@
 extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
 extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 
-#define __raw_writeb(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v)))
-#define __raw_writew(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)))
-#define __raw_writel(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v)))
+#if __LINUX_ARM_ARCH__ < 6
+/*
+ * Half-word accesses are problematic with RiscPC due to limitations of
+ * the bus. Rather than special-case the machine, just let the compiler
+ * generate the access for CPUs prior to ARMv6.
+ */
+#define __raw_readw(a)         (__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
+#define __raw_writew(v,a)      ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)))
+#else
+/*
+ * When running under a hypervisor, we want to avoid I/O accesses with
+ * writeback addressing modes as these incur a significant performance
+ * overhead (the address generation must be emulated in software).
+ */
+static inline void __raw_writew(u16 val, volatile void __iomem *addr)
+{
+	asm volatile("strh %1, %0"
+		     : "+Q" (*(volatile u16 __force *)addr)
+		     : "r" (val));
+}
 
-#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
-#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
-#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 val;
+	asm volatile("ldrh %1, %0"
+		     : "+Q" (*(volatile u16 __force *)addr),
+		       "=r" (val));
+	return val;
+}
+#endif
+
+static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
+{
+	asm volatile("strb %1, %0"
+		     : "+Qo" (*(volatile u8 __force *)addr)
+		     : "r" (val));
+}
+
+static inline void __raw_writel(u32 val, volatile void __iomem *addr)
+{
+	asm volatile("str %1, %0"
+		     : "+Qo" (*(volatile u32 __force *)addr)
+		     : "r" (val));
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 val;
+	asm volatile("ldrb %1, %0"
+		     : "+Qo" (*(volatile u8 __force *)addr),
+		       "=r" (val));
+	return val;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 val;
+	asm volatile("ldr %1, %0"
+		     : "+Qo" (*(volatile u32 __force *)addr),
+		       "=r" (val));
+	return val;
+}
 
 /*
  * Architecture ioremap implementation.
@@ -113,11 +168,19 @@
 #define __iowmb()		do { } while (0)
 #endif
 
+/* PCI fixed i/o mapping */
+#define PCI_IO_VIRT_BASE	0xfee00000
+
+extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+
 /*
  * Now, pick up the machine-defined IO definitions
  */
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
+#elif defined(CONFIG_PCI)
+#define IO_SPACE_LIMIT	((resource_size_t)0xfffff)
+#define __io(a)		__typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
 #else
 #define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/ipcbuf.h linux-libre-3.7-gnu/arch/arm/include/asm/ipcbuf.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/ipcbuf.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/ipcbuf.h	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/Kbuild linux-libre-3.7-gnu/arch/arm/include/asm/Kbuild
--- linux-libre-3.6-gnu/arch/arm/include/asm/Kbuild	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/Kbuild	2012-12-10 22:30:57.000000000 -0500
@@ -1,20 +1,35 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += hwcap.h
 
 generic-y += auxvec.h
 generic-y += bitsperlong.h
 generic-y += cputime.h
+generic-y += current.h
 generic-y += emergency-restart.h
 generic-y += errno.h
+generic-y += exec.h
 generic-y += ioctl.h
+generic-y += ipcbuf.h
 generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += local.h
 generic-y += local64.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
 generic-y += percpu.h
 generic-y += poll.h
 generic-y += resource.h
 generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
 generic-y += siginfo.h
 generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += timex.h
+generic-y += types.h
+generic-y += unaligned.h
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/kvm_para.h linux-libre-3.7-gnu/arch/arm/include/asm/kvm_para.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/kvm_para.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/kvm_para.h	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/leds.h linux-libre-3.7-gnu/arch/arm/include/asm/leds.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/leds.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/leds.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,50 +0,0 @@
-/*
- *  arch/arm/include/asm/leds.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Event-driven interface for LEDs on machines
- *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
-	led_idle_start,
-	led_idle_end,
-	led_timer,
-	led_start,
-	led_stop,
-	led_claim,		/* override idle & timer leds */
-	led_release,		/* restore idle & timer leds */
-	led_start_timer_mode,
-	led_stop_timer_mode,
-	led_green_on,
-	led_green_off,
-	led_amber_on,
-	led_amber_off,
-	led_red_on,
-	led_red_off,
-	led_blue_on,
-	led_blue_off,
-	/*
-	 * I want this between led_timer and led_start, but
-	 * someone has decided to export this to user space
-	 */
-	led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/mach/arch.h linux-libre-3.7-gnu/arch/arm/include/asm/mach/arch.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/mach/arch.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/mach/arch.h	2012-12-10 22:30:57.000000000 -0500
@@ -14,6 +14,12 @@
 struct meminfo;
 struct sys_timer;
 struct pt_regs;
+struct smp_operations;
+#ifdef CONFIG_SMP
+#define smp_ops(ops) (&(ops))
+#else
+#define smp_ops(ops) (struct smp_operations *)NULL
+#endif
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
@@ -35,6 +41,7 @@
 	unsigned char		reserve_lp1 :1;	/* never has lp1	*/
 	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
 	char			restart_mode;	/* default restart mode	*/
+	struct smp_operations	*smp;		/* SMP operations	*/
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
 	void			(*reserve)(void);/* reserve mem blocks	*/
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/mach/map.h linux-libre-3.7-gnu/arch/arm/include/asm/mach/map.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/mach/map.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/mach/map.h	2012-12-10 22:30:57.000000000 -0500
@@ -9,6 +9,9 @@
  *
  *  Page table mapping constructs and function prototypes
  */
+#ifndef __ASM_MACH_MAP_H
+#define __ASM_MACH_MAP_H
+
 #include <asm/io.h>
 
 struct map_desc {
@@ -34,6 +37,8 @@
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
+				  void *caller);
 
 struct mem_type;
 extern const struct mem_type *get_mem_type(unsigned int type);
@@ -44,4 +49,7 @@
 			const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)	do { } while (0)
+#define vm_reserve_area_early(a,s,c)	do { } while (0)
+#endif
+
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/mach/pci.h linux-libre-3.7-gnu/arch/arm/include/asm/mach/pci.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/mach/pci.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/mach/pci.h	2012-12-10 22:30:57.000000000 -0500
@@ -11,6 +11,8 @@
 #ifndef __ASM_MACH_PCI_H
 #define __ASM_MACH_PCI_H
 
+#include <linux/ioport.h>
+
 struct pci_sys_data;
 struct pci_ops;
 struct pci_bus;
@@ -42,6 +44,8 @@
 	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
 	struct pci_bus	*bus;		/* PCI bus				*/
 	struct list_head resources;	/* root bus resources (apertures)       */
+	struct resource io_res;
+	char		io_res_name[12];
 					/* Bridge swizzling			*/
 	u8		(*swizzle)(struct pci_dev *, u8 *);
 					/* IRQ mapping				*/
@@ -55,6 +59,15 @@
 void pci_common_init(struct hw_pci *);
 
 /*
+ * Setup early fixed I/O mapping.
+ */
+#if defined(CONFIG_PCI)
+extern void pci_map_io_early(unsigned long pfn);
+#else
+static inline void pci_map_io_early(unsigned long pfn) {}
+#endif
+
+/*
  * PCI controllers
  */
 extern struct pci_ops iop3xx_ops;
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/memory.h linux-libre-3.7-gnu/arch/arm/include/asm/memory.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/memory.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/memory.h	2012-12-10 22:30:57.000000000 -0500
@@ -275,14 +275,6 @@
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
-/*
- * Optional coherency support.  Currently used only by selected
- * Intel XSC3-based systems.
- */
-#ifndef arch_is_coherent
-#define arch_is_coherent()		0
-#endif
-
 #endif
 
 #include <asm-generic/memory_model.h>
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/mman.h linux-libre-3.7-gnu/arch/arm/include/asm/mman.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/mman.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/mman.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,4 +0,0 @@
-#include <asm-generic/mman.h>
-
-#define arch_mmap_check(addr, len, flags) \
-	(((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0)
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/module.h linux-libre-3.7-gnu/arch/arm/include/asm/module.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/module.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/module.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,9 +1,7 @@
 #ifndef _ASM_ARM_MODULE_H
 #define _ASM_ARM_MODULE_H
 
-#define Elf_Shdr	Elf32_Shdr
-#define Elf_Sym		Elf32_Sym
-#define Elf_Ehdr	Elf32_Ehdr
+#include <asm-generic/module.h>
 
 struct unwind_table;
 
@@ -16,13 +14,11 @@
 	ARM_SEC_DEVEXIT,
 	ARM_SEC_MAX,
 };
-#endif
 
 struct mod_arch_specific {
-#ifdef CONFIG_ARM_UNWIND
 	struct unwind_table *unwind[ARM_SEC_MAX];
-#endif
 };
+#endif
 
 /*
  * Add the ARM architecture version to the version magic string
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/msgbuf.h linux-libre-3.7-gnu/arch/arm/include/asm/msgbuf.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/msgbuf.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/msgbuf.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,31 +0,0 @@
-#ifndef _ASMARM_MSGBUF_H
-#define _ASMARM_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _ASMARM_MSGBUF_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/mutex.h linux-libre-3.7-gnu/arch/arm/include/asm/mutex.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/mutex.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/mutex.h	2012-12-10 22:30:57.000000000 -0500
@@ -9,8 +9,13 @@
 #define _ASM_MUTEX_H
 /*
  * On pre-ARMv6 hardware this results in a swp-based implementation,
- * which is the most efficient. For ARMv6+, we emit a pair of exclusive
- * accesses instead.
+ * which is the most efficient. For ARMv6+, we have exclusive memory
+ * accessors and use atomic_dec to avoid the extra xchg operations
+ * on the locking slowpaths.
  */
+#if __LINUX_ARM_ARCH__ < 6
 #include <asm-generic/mutex-xchg.h>
+#else
+#include <asm-generic/mutex-dec.h>
 #endif
+#endif	/* _ASM_MUTEX_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/opcodes.h linux-libre-3.7-gnu/arch/arm/include/asm/opcodes.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/opcodes.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/opcodes.h	2012-12-10 22:30:57.000000000 -0500
@@ -19,6 +19,33 @@
 
 
 /*
+ * Assembler opcode byteswap helpers.
+ * These are only intended for use by this header: don't use them directly,
+ * because they will be suboptimal in most cases.
+ */
+#define ___asm_opcode_swab32(x) (	\
+	  (((x) << 24) & 0xFF000000)	\
+	| (((x) <<  8) & 0x00FF0000)	\
+	| (((x) >>  8) & 0x0000FF00)	\
+	| (((x) >> 24) & 0x000000FF)	\
+)
+#define ___asm_opcode_swab16(x) (	\
+	  (((x) << 8) & 0xFF00)		\
+	| (((x) >> 8) & 0x00FF)		\
+)
+#define ___asm_opcode_swahb32(x) (	\
+	  (((x) << 8) & 0xFF00FF00)	\
+	| (((x) >> 8) & 0x00FF00FF)	\
+)
+#define ___asm_opcode_swahw32(x) (	\
+	  (((x) << 16) & 0xFFFF0000)	\
+	| (((x) >> 16) & 0x0000FFFF)	\
+)
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
+
+
+/*
  * Opcode byteswap helpers
  *
  * These macros help with converting instructions between a canonical integer
@@ -41,39 +68,163 @@
  * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
  * represent any valid Thumb-2 instruction.  For this range,
  * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
+ *
+ * The ___asm variants are intended only for use by this header, in situations
+ * involving inline assembler.  For .S files, the normal __opcode_*() macros
+ * should do the right thing.
  */
+#ifdef __ASSEMBLY__
 
-#ifndef __ASSEMBLY__
+#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
+#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
+#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
+#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
+#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
+#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
+
+#else /* ! __ASSEMBLY__ */
 
 #include <linux/types.h>
 #include <linux/swab.h>
 
+#define ___opcode_swab32(x) swab32(x)
+#define ___opcode_swab16(x) swab16(x)
+#define ___opcode_swahb32(x) swahb32(x)
+#define ___opcode_swahw32(x) swahw32(x)
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___opcode_identity16(x) ((u16)(x))
+
+#endif /* ! __ASSEMBLY__ */
+
+
 #ifdef CONFIG_CPU_ENDIAN_BE8
-#define __opcode_to_mem_arm(x) swab32(x)
-#define __opcode_to_mem_thumb16(x) swab16(x)
-#define __opcode_to_mem_thumb32(x) swahb32(x)
-#else
-#define __opcode_to_mem_arm(x) ((u32)(x))
-#define __opcode_to_mem_thumb16(x) ((u16)(x))
-#define __opcode_to_mem_thumb32(x) swahw32(x)
+
+#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
+#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
+
+#else /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+/*
+ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
+ * work in all cases, due to alignment constraints.  For now, a correct
+ * version is not provided for BE32.
+ */
+#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
 #endif
 
+#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
+
 #define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
 #define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
 #define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
+#endif
 
 /* Operations specific to Thumb opcodes */
 
 /* Instruction size checks: */
-#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL)
-#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL)
+#define __opcode_is_thumb32(x) (		\
+	   ((x) & 0xF8000000) == 0xE8000000	\
+	|| ((x) & 0xF0000000) == 0xF0000000	\
+)
+#define __opcode_is_thumb16(x) (					\
+	   ((x) & 0xFFFF0000) == 0					\
+	&& !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000)	\
+)
 
 /* Operations to construct or split 32-bit Thumb instructions: */
-#define __opcode_thumb32_first(x) ((u16)((x) >> 16))
-#define __opcode_thumb32_second(x) ((u16)(x))
-#define __opcode_thumb32_compose(first, second) \
-	(((u32)(u16)(first) << 16) | (u32)(u16)(second))
+#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
+#define __opcode_thumb32_second(x) (___opcode_identity16(x))
+#define __opcode_thumb32_compose(first, second) (			\
+	  (___opcode_identity32(___opcode_identity16(first)) << 16)	\
+	| ___opcode_identity32(___opcode_identity16(second))		\
+)
+#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
+#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
+#define ___asm_opcode_thumb32_compose(first, second) (			    \
+	  (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
+	| ___asm_opcode_identity32(___asm_opcode_identity16(second))	    \
+)
 
-#endif /* __ASSEMBLY__ */
+/*
+ * Opcode injection helpers
+ *
+ * In rare cases it is necessary to assemble an opcode which the
+ * assembler does not support directly, or which would normally be
+ * rejected because of the CFLAGS or AFLAGS used to build the affected
+ * file.
+ *
+ * Before using these macros, consider carefully whether it is feasible
+ * instead to change the build flags for your file, or whether it really
+ * makes sense to support old assembler versions when building that
+ * particular kernel feature.
+ *
+ * The macros defined here should only be used where there is no viable
+ * alternative.
+ *
+ *
+ * __inst_arm(x): emit the specified ARM opcode
+ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
+ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
+ *
+ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
+ *	16-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
+ *	32-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ *
+ * Note that using these macros directly is poor practice.  Instead, you
+ * should use them to define human-readable wrapper macros to encode the
+ * instructions that you care about.  In code which might run on ARMv7 or
+ * above, you can usually use the __inst_arm_thumb{16,32} macros to
+ * specify the ARM and Thumb alternatives at the same time.  This ensures
+ * that the correct opcode gets emitted depending on the instruction set
+ * used for the kernel build.
+ *
+ * Look at opcodes-virt.h for an example of how to use these macros.
+ */
+#include <linux/stringify.h>
+
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+#define __inst_thumb32(x) ___inst_thumb32(				\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)),	\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x))	\
+)
+#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
+	__inst_thumb16(thumb_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
+	__inst_thumb32(thumb_opcode)
+#else
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#endif
+
+/* Helpers for the helpers.  Don't use these directly. */
+#ifdef __ASSEMBLY__
+#define ___inst_arm(x) .long x
+#define ___inst_thumb16(x) .short x
+#define ___inst_thumb32(first, second) .short first, second
+#else
+#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
+#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
+#define ___inst_thumb32(first, second) \
+	".short " __stringify(first) ", " __stringify(second) "\n\t"
+#endif
 
 #endif /* __ASM_ARM_OPCODES_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/opcodes-virt.h linux-libre-3.7-gnu/arch/arm/include/asm/opcodes-virt.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/opcodes-virt.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/opcodes-virt.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,39 @@
+/*
+ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
+ * Copyright (C) 2012  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARM_OPCODES_VIRT_H
+#define __ASM_ARM_OPCODES_VIRT_H
+
+#include <asm/opcodes.h>
+
+#define __HVC(imm16) __inst_arm_thumb32(				\
+	0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F),	\
+	0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF)	\
+)
+
+#define __ERET	__inst_arm_thumb32(					\
+	0xE160006E,							\
+	0xF3DE8F00							\
+)
+
+#define __MSR_ELR_HYP(regnum)	__inst_arm_thumb32(			\
+	0xE12EF300 | regnum,						\
+	0xF3808E30 | (regnum << 16)					\
+)
+
+#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/page.h linux-libre-3.7-gnu/arch/arm/include/asm/page.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/page.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/page.h	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,7 @@
 
 #ifndef CONFIG_MMU
 
-#include "page-nommu.h"
+#include <asm/page-nommu.h>
 
 #else
 
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/param.h linux-libre-3.7-gnu/arch/arm/include/asm/param.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/param.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/param.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/param.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PARAM_H
-#define __ASM_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#else
-# define HZ		100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP         (-1)
-#endif
-
-/* max length of hostname */
-#define MAXHOSTNAMELEN  64
-
-#endif
-
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/parport.h linux-libre-3.7-gnu/arch/arm/include/asm/parport.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/parport.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/parport.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/include/asm/parport.h: ARM-specific parport initialisation
- *
- *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef __ASMARM_PARPORT_H
-#define __ASMARM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASMARM_PARPORT_H) */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/perf_event.h linux-libre-3.7-gnu/arch/arm/include/asm/perf_event.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/perf_event.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/perf_event.h	2012-12-10 22:30:57.000000000 -0500
@@ -12,6 +12,13 @@
 #ifndef __ARM_PERF_EVENT_H__
 #define __ARM_PERF_EVENT_H__
 
-/* Nothing to see here... */
+/*
+ * The ARMv7 CPU PMU supports up to 32 event counters.
+ */
+#define ARMPMU_MAX_HWEVENTS		32
+
+#define HW_OP_UNSUPPORTED		0xFFFF
+#define C(_x)				PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED		0xFFFF
 
 #endif /* __ARM_PERF_EVENT_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/pgtable.h linux-libre-3.7-gnu/arch/arm/include/asm/pgtable.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/pgtable.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/pgtable.h	2012-12-10 22:30:57.000000000 -0500
@@ -16,7 +16,7 @@
 #ifndef CONFIG_MMU
 
 #include <asm-generic/4level-fixup.h>
-#include "pgtable-nommu.h"
+#include <asm/pgtable-nommu.h>
 
 #else
 
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/pmu.h linux-libre-3.7-gnu/arch/arm/include/asm/pmu.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/pmu.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/pmu.h	2012-12-10 22:30:57.000000000 -0500
@@ -16,69 +16,30 @@
 #include <linux/perf_event.h>
 
 /*
- * Types of PMUs that can be accessed directly and require mutual
- * exclusion between profiling tools.
- */
-enum arm_pmu_type {
-	ARM_PMU_DEVICE_CPU	= 0,
-	ARM_NUM_PMU_DEVICES,
-};
-
-/*
  * struct arm_pmu_platdata - ARM PMU platform data
  *
  * @handle_irq: an optional handler which will be called from the
  *	interrupt and passed the address of the low level handler,
  *	and can be used to implement any platform specific handling
  *	before or after calling it.
- * @enable_irq: an optional handler which will be called after
- *	request_irq and be used to handle some platform specific
- *	irq enablement
- * @disable_irq: an optional handler which will be called before
- *	free_irq and be used to handle some platform specific
- *	irq disablement
+ * @runtime_resume: an optional handler which will be called by the
+ *	runtime PM framework following a call to pm_runtime_get().
+ *	Note that if pm_runtime_get() is called more than once in
+ *	succession this handler will only be called once.
+ * @runtime_suspend: an optional handler which will be called by the
+ *	runtime PM framework following a call to pm_runtime_put().
+ *	Note that if pm_runtime_get() is called more than once in
+ *	succession this handler will only be called following the
+ *	final call to pm_runtime_put() that actually disables the
+ *	hardware.
  */
 struct arm_pmu_platdata {
 	irqreturn_t (*handle_irq)(int irq, void *dev,
 				  irq_handler_t pmu_handler);
-	void (*enable_irq)(int irq);
-	void (*disable_irq)(int irq);
+	int (*runtime_resume)(struct device *dev);
+	int (*runtime_suspend)(struct device *dev);
 };
 
-#ifdef CONFIG_CPU_HAS_PMU
-
-/**
- * reserve_pmu() - reserve the hardware performance counters
- *
- * Reserve the hardware performance counters in the system for exclusive use.
- * Returns 0 on success or -EBUSY if the lock is already held.
- */
-extern int
-reserve_pmu(enum arm_pmu_type type);
-
-/**
- * release_pmu() - Relinquish control of the performance counters
- *
- * Release the performance counters and allow someone else to use them.
- */
-extern void
-release_pmu(enum arm_pmu_type type);
-
-#else /* CONFIG_CPU_HAS_PMU */
-
-#include <linux/err.h>
-
-static inline int
-reserve_pmu(enum arm_pmu_type type)
-{
-	return -ENODEV;
-}
-
-static inline void
-release_pmu(enum arm_pmu_type type)	{ }
-
-#endif /* CONFIG_CPU_HAS_PMU */
-
 #ifdef CONFIG_HW_PERF_EVENTS
 
 /* The events for a given PMU register set. */
@@ -103,7 +64,6 @@
 
 struct arm_pmu {
 	struct pmu	pmu;
-	enum arm_pmu_type type;
 	cpumask_t	active_irqs;
 	char		*name;
 	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
@@ -118,6 +78,8 @@
 	void		(*start)(void);
 	void		(*stop)(void);
 	void		(*reset)(void *);
+	int		(*request_irq)(irq_handler_t handler);
+	void		(*free_irq)(void);
 	int		(*map_event)(struct perf_event *event);
 	int		num_events;
 	atomic_t	active_events;
@@ -129,7 +91,9 @@
 
 #define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
 
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+extern const struct dev_pm_ops armpmu_dev_pm_ops;
+
+int armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
@@ -139,6 +103,13 @@
 			    struct hw_perf_event *hwc,
 			    int idx);
 
+int armpmu_map_event(struct perf_event *event,
+		     const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+		     const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
+						[PERF_COUNT_HW_CACHE_OP_MAX]
+						[PERF_COUNT_HW_CACHE_RESULT_MAX],
+		     u32 raw_event_mask);
+
 #endif /* CONFIG_HW_PERF_EVENTS */
 
 #endif /* __ARM_PMU_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/posix_types.h linux-libre-3.7-gnu/arch/arm/include/asm/posix_types.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/posix_types.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/posix_types.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,37 +0,0 @@
-/*
- *  arch/arm/include/asm/posix_types.h
- *
- *  Copyright (C) 1996-1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996	RMK	Created
- */
-#ifndef __ARCH_ARM_POSIX_TYPES_H
-#define __ARCH_ARM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short		__kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-
-typedef unsigned short		__kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef unsigned short		__kernel_uid_t;
-typedef unsigned short		__kernel_gid_t;
-#define __kernel_uid_t __kernel_uid_t
-
-typedef unsigned short		__kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/processor.h linux-libre-3.7-gnu/arch/arm/include/asm/processor.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/processor.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/processor.h	2012-12-10 22:30:57.000000000 -0500
@@ -85,11 +85,6 @@
 #define cpu_relax()			barrier()
 #endif
 
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
 
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/ptrace.h linux-libre-3.7-gnu/arch/arm/include/asm/ptrace.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/ptrace.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/ptrace.h	2012-12-10 22:30:57.000000000 -0500
@@ -10,132 +10,12 @@
 #ifndef __ASM_ARM_PTRACE_H
 #define __ASM_ARM_PTRACE_H
 
-#include <asm/hwcap.h>
-
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-#define PTRACE_GETFPREGS	14
-#define PTRACE_SETFPREGS	15
-/* PTRACE_ATTACH is 16 */
-/* PTRACE_DETACH is 17 */
-#define PTRACE_GETWMMXREGS	18
-#define PTRACE_SETWMMXREGS	19
-/* 20 is unused */
-#define PTRACE_OLDSETOPTIONS	21
-#define PTRACE_GET_THREAD_AREA	22
-#define PTRACE_SET_SYSCALL	23
-/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETCRUNCHREGS	25
-#define PTRACE_SETCRUNCHREGS	26
-#define PTRACE_GETVFPREGS	27
-#define PTRACE_SETVFPREGS	28
-#define PTRACE_GETHBPREGS	29
-#define PTRACE_SETHBPREGS	30
-
-/*
- * PSR bits
- */
-#define USR26_MODE	0x00000000
-#define FIQ26_MODE	0x00000001
-#define IRQ26_MODE	0x00000002
-#define SVC26_MODE	0x00000003
-#define USR_MODE	0x00000010
-#define FIQ_MODE	0x00000011
-#define IRQ_MODE	0x00000012
-#define SVC_MODE	0x00000013
-#define ABT_MODE	0x00000017
-#define UND_MODE	0x0000001b
-#define SYSTEM_MODE	0x0000001f
-#define MODE32_BIT	0x00000010
-#define MODE_MASK	0x0000001f
-#define PSR_T_BIT	0x00000020
-#define PSR_F_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_A_BIT	0x00000100
-#define PSR_E_BIT	0x00000200
-#define PSR_J_BIT	0x01000000
-#define PSR_Q_BIT	0x08000000
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_N_BIT	0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_s		0x00ff0000	/* Status		*/
-#define PSR_x		0x0000ff00	/* Extension		*/
-#define PSR_c		0x000000ff	/* Control		*/
-
-/*
- * ARMv7 groups of PSR bits
- */
-#define APSR_MASK	0xf80f0000	/* N, Z, C, V, Q and GE flags */
-#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
-#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
-#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
-
-/*
- * Default endianness state
- */
-#ifdef CONFIG_CPU_ENDIAN_BE8
-#define PSR_ENDSTATE	PSR_E_BIT
-#else
-#define PSR_ENDSTATE	0
-#endif
-
-/* 
- * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
- * process is located in memory.
- */
-#define PT_TEXT_ADDR		0x10000
-#define PT_DATA_ADDR		0x10004
-#define PT_TEXT_END_ADDR	0x10008
+#include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.  Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-#ifndef __KERNEL__
-struct pt_regs {
-	long uregs[18];
-};
-#else /* __KERNEL__ */
 struct pt_regs {
 	unsigned long uregs[18];
 };
-#endif /* __KERNEL__ */
-
-#define ARM_cpsr	uregs[16]
-#define ARM_pc		uregs[15]
-#define ARM_lr		uregs[14]
-#define ARM_sp		uregs[13]
-#define ARM_ip		uregs[12]
-#define ARM_fp		uregs[11]
-#define ARM_r10		uregs[10]
-#define ARM_r9		uregs[9]
-#define ARM_r8		uregs[8]
-#define ARM_r7		uregs[7]
-#define ARM_r6		uregs[6]
-#define ARM_r5		uregs[5]
-#define ARM_r4		uregs[4]
-#define ARM_r3		uregs[3]
-#define ARM_r2		uregs[2]
-#define ARM_r1		uregs[1]
-#define ARM_r0		uregs[0]
-#define ARM_ORIG_r0	uregs[17]
-
-/*
- * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
- * and core dumps.
- */
-#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
-
-#ifdef __KERNEL__
 
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
@@ -254,9 +134,10 @@
 	return regs->ARM_sp;
 }
 
-#endif /* __KERNEL__ */
+#define current_pt_regs(void) ({				\
+	register unsigned long sp asm ("sp");			\
+	(struct pt_regs *)((sp | (THREAD_SIZE - 1)) - 7) - 1;	\
+})
 
 #endif /* __ASSEMBLY__ */
-
 #endif
-
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/sched_clock.h linux-libre-3.7-gnu/arch/arm/include/asm/sched_clock.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/sched_clock.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/sched_clock.h	2012-12-10 22:30:57.000000000 -0500
@@ -10,7 +10,5 @@
 
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate);
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/segment.h linux-libre-3.7-gnu/arch/arm/include/asm/segment.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/segment.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/segment.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARM_SEGMENT_H
-#define __ASM_ARM_SEGMENT_H
-
-#define __KERNEL_CS   0x0
-#define __KERNEL_DS   0x0
-
-#define __USER_CS     0x1
-#define __USER_DS     0x1
-
-#endif /* __ASM_ARM_SEGMENT_H */
-
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/sembuf.h linux-libre-3.7-gnu/arch/arm/include/asm/sembuf.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/sembuf.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/sembuf.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,25 +0,0 @@
-#ifndef _ASMARM_SEMBUF_H
-#define _ASMARM_SEMBUF_H
-
-/* 
- * The semid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SEMBUF_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/serial.h linux-libre-3.7-gnu/arch/arm/include/asm/serial.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/serial.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/serial.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/include/asm/serial.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   15-10-1996	RMK	Created
- */
-
-#ifndef __ASM_SERIAL_H
-#define __ASM_SERIAL_H
-
-#define BASE_BAUD	(1843200 / 16)
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/setup.h linux-libre-3.7-gnu/arch/arm/include/asm/setup.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/setup.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/setup.h	2012-12-10 22:30:57.000000000 -0500
@@ -14,176 +14,8 @@
 #ifndef __ASMARM_SETUP_H
 #define __ASMARM_SETUP_H
 
-#include <linux/types.h>
-
-#define COMMAND_LINE_SIZE 1024
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE	0x00000000
-
-struct tag_header {
-	__u32 size;
-	__u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE	0x54410001
-
-struct tag_core {
-	__u32 flags;		/* bit 0 = read-only */
-	__u32 pagesize;
-	__u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM	0x54410002
-
-struct tag_mem32 {
-	__u32	size;
-	__u32	start;	/* physical start address */
-};
-
-/* VGA text type displays */
-#define ATAG_VIDEOTEXT	0x54410003
-
-struct tag_videotext {
-	__u8		x;
-	__u8		y;
-	__u16		video_page;
-	__u8		video_mode;
-	__u8		video_cols;
-	__u16		video_ega_bx;
-	__u8		video_lines;
-	__u8		video_isvga;
-	__u16		video_points;
-};
-
-/* describes how the ramdisk will be used in kernel */
-#define ATAG_RAMDISK	0x54410004
-
-struct tag_ramdisk {
-	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
-	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
-	__u32 start;	/* starting block of floppy-based RAM disk image */
-};
-
-/* describes where the compressed ramdisk image lives (virtual address) */
-/*
- * this one accidentally used virtual addresses - as such,
- * it's deprecated.
- */
-#define ATAG_INITRD	0x54410005
-
-/* describes where the compressed ramdisk image lives (physical address) */
-#define ATAG_INITRD2	0x54420005
-
-struct tag_initrd {
-	__u32 start;	/* physical start address */
-	__u32 size;	/* size of compressed ramdisk image in bytes */
-};
-
-/* board serial number. "64 bits should be enough for everybody" */
-#define ATAG_SERIAL	0x54410006
-
-struct tag_serialnr {
-	__u32 low;
-	__u32 high;
-};
-
-/* board revision */
-#define ATAG_REVISION	0x54410007
-
-struct tag_revision {
-	__u32 rev;
-};
-
-/* initial values for vesafb-type framebuffers. see struct screen_info
- * in include/linux/tty.h
- */
-#define ATAG_VIDEOLFB	0x54410008
-
-struct tag_videolfb {
-	__u16		lfb_width;
-	__u16		lfb_height;
-	__u16		lfb_depth;
-	__u16		lfb_linelength;
-	__u32		lfb_base;
-	__u32		lfb_size;
-	__u8		red_size;
-	__u8		red_pos;
-	__u8		green_size;
-	__u8		green_pos;
-	__u8		blue_size;
-	__u8		blue_pos;
-	__u8		rsvd_size;
-	__u8		rsvd_pos;
-};
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE	0x54410009
-
-struct tag_cmdline {
-	char	cmdline[1];	/* this is the minimum size */
-};
-
-/* acorn RiscPC specific information */
-#define ATAG_ACORN	0x41000101
-
-struct tag_acorn {
-	__u32 memc_control_reg;
-	__u32 vram_pages;
-	__u8 sounddefault;
-	__u8 adfsdrives;
-};
-
-/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
-#define ATAG_MEMCLK	0x41000402
-
-struct tag_memclk {
-	__u32 fmemclk;
-};
-
-struct tag {
-	struct tag_header hdr;
-	union {
-		struct tag_core		core;
-		struct tag_mem32	mem;
-		struct tag_videotext	videotext;
-		struct tag_ramdisk	ramdisk;
-		struct tag_initrd	initrd;
-		struct tag_serialnr	serialnr;
-		struct tag_revision	revision;
-		struct tag_videolfb	videolfb;
-		struct tag_cmdline	cmdline;
-
-		/*
-		 * Acorn specific
-		 */
-		struct tag_acorn	acorn;
-
-		/*
-		 * DC21285 specific
-		 */
-		struct tag_memclk	memclk;
-	} u;
-};
-
-struct tagtable {
-	__u32 tag;
-	int (*parse)(const struct tag *);
-};
-
-#define tag_member_present(tag,member)				\
-	((unsigned long)(&((struct tag *)0L)->member + 1)	\
-		<= (tag)->hdr.size * 4)
-
-#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
-#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base)		\
-	for (t = base; t->hdr.size; t = tag_next(t))
+#include <uapi/asm/setup.h>
 
-#ifdef __KERNEL__
 
 #define __tag __used __attribute__((__section__(".taglist.init")))
 #define __tagtable(tag, fn) \
@@ -221,6 +53,4 @@
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
 
-#endif  /*  __KERNEL__  */
-
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/shmbuf.h linux-libre-3.7-gnu/arch/arm/include/asm/shmbuf.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/shmbuf.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/shmbuf.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,42 +0,0 @@
-#ifndef _ASMARM_SHMBUF_H
-#define _ASMARM_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SHMBUF_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/sigcontext.h linux-libre-3.7-gnu/arch/arm/include/asm/sigcontext.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/sigcontext.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/sigcontext.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,34 +0,0 @@
-#ifndef _ASMARM_SIGCONTEXT_H
-#define _ASMARM_SIGCONTEXT_H
-
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked.  Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
-	unsigned long trap_no;
-	unsigned long error_code;
-	unsigned long oldmask;
-	unsigned long arm_r0;
-	unsigned long arm_r1;
-	unsigned long arm_r2;
-	unsigned long arm_r3;
-	unsigned long arm_r4;
-	unsigned long arm_r5;
-	unsigned long arm_r6;
-	unsigned long arm_r7;
-	unsigned long arm_r8;
-	unsigned long arm_r9;
-	unsigned long arm_r10;
-	unsigned long arm_fp;
-	unsigned long arm_ip;
-	unsigned long arm_sp;
-	unsigned long arm_lr;
-	unsigned long arm_pc;
-	unsigned long arm_cpsr;
-	unsigned long fault_address;
-};
-
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/signal.h linux-libre-3.7-gnu/arch/arm/include/asm/signal.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/signal.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/signal.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,12 +1,8 @@
 #ifndef _ASMARM_SIGNAL_H
 #define _ASMARM_SIGNAL_H
 
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
+#include <uapi/asm/signal.h>
 
-#ifdef __KERNEL__
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
@@ -20,100 +16,6 @@
 	unsigned long sig[_NSIG_WORDS];
 } sigset_t;
 
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-#define SIGSWI		32
-
-/*
- * SA_FLAGS values:
- *
- * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
- * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
- * SA_SIGINFO		deliver the signal with SIGINFO structs
- * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
- *			is running in 26-bit.
- * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
- * SA_RESTART		flag to get restarting signals (which were the default long ago)
- * SA_NODEFER		prevents the current signal from being masked in the handler.
- * SA_RESETHAND		clears the handler when the signal is delivered.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_THIRTYTWO	0x02000000
-#define SA_RESTORER	0x04000000
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
 struct old_sigaction {
 	__sighandler_t sa_handler;
 	old_sigset_t sa_mask;
@@ -132,33 +34,6 @@
 	struct sigaction sa;
 };
 
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
 #include <asm/sigcontext.h>
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 #endif
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/smp.h linux-libre-3.7-gnu/arch/arm/include/asm/smp.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/smp.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/smp.h	2012-12-10 22:30:57.000000000 -0500
@@ -60,15 +60,6 @@
  */
 asmlinkage void secondary_start_kernel(void);
 
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initialize cpu_possible map, and enable coherency
- */
-extern void platform_smp_prepare_cpus(unsigned int);
 
 /*
  * Initial data for bringing up a secondary CPU.
@@ -79,18 +70,47 @@
 	void *stack;
 };
 extern struct secondary_data secondary_data;
+extern volatile int pen_release;
 
 extern int __cpu_disable(void);
-extern int platform_cpu_disable(unsigned int cpu);
 
 extern void __cpu_die(unsigned int cpu);
 extern void cpu_die(void);
 
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
+struct smp_operations {
+#ifdef CONFIG_SMP
+	/*
+	 * Setup the set of possible CPUs (via set_cpu_possible)
+	 */
+	void (*smp_init_cpus)(void);
+	/*
+	 * Initialize cpu_possible map, and enable coherency
+	 */
+	void (*smp_prepare_cpus)(unsigned int max_cpus);
+
+	/*
+	 * Perform platform specific initialisation of the specified CPU.
+	 */
+	void (*smp_secondary_init)(unsigned int cpu);
+	/*
+	 * Boot a secondary CPU, and assign it the specified idle task.
+	 * This also gives us the initial stack to use for this CPU.
+	 */
+	int  (*smp_boot_secondary)(unsigned int cpu, struct task_struct *idle);
+#ifdef CONFIG_HOTPLUG_CPU
+	int  (*cpu_kill)(unsigned int cpu);
+	void (*cpu_die)(unsigned int cpu);
+	int  (*cpu_disable)(unsigned int cpu);
+#endif
+#endif
+};
+
+/*
+ * set platform specific SMP operations
+ */
+extern void smp_set_ops(struct smp_operations *);
+
 #endif /* ifndef __ASM_ARM_SMP_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/socket.h linux-libre-3.7-gnu/arch/arm/include/asm/socket.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/socket.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/socket.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,72 +0,0 @@
-#ifndef _ASMARM_SOCKET_H
-#define _ASMARM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#define SO_PROTOCOL		38
-#define SO_DOMAIN		39
-
-#define SO_RXQ_OVFL             40
-
-#define SO_WIFI_STATUS		41
-#define SCM_WIFI_STATUS		SO_WIFI_STATUS
-#define SO_PEEK_OFF		42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS		43
-
-#endif /* _ASM_SOCKET_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/sockios.h linux-libre-3.7-gnu/arch/arm/include/asm/sockios.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/sockios.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/sockios.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,13 +0,0 @@
-#ifndef __ARCH_ARM_SOCKIOS_H
-#define __ARCH_ARM_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/statfs.h linux-libre-3.7-gnu/arch/arm/include/asm/statfs.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/statfs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/statfs.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,12 +0,0 @@
-#ifndef _ASMARM_STATFS_H
-#define _ASMARM_STATFS_H
-
-/*
- * With EABI there is 4 bytes of padding added to this structure.
- * Let's pack it so the padding goes away to simplify dual ABI support.
- * Note that user space does NOT have to pack this structure.
- */
-#define ARCH_PACK_STATFS64 __attribute__((packed,aligned(4)))
-
-#include <asm-generic/statfs.h>
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/stat.h linux-libre-3.7-gnu/arch/arm/include/asm/stat.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/stat.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/stat.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,87 +0,0 @@
-#ifndef _ASMARM_STAT_H
-#define _ASMARM_STAT_H
-
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-
-#define STAT_HAVE_NSEC 
-
-struct stat {
-#if defined(__ARMEB__)
-	unsigned short st_dev;
-	unsigned short __pad1;
-#else
-	unsigned long  st_dev;
-#endif
-	unsigned long  st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-#if defined(__ARMEB__)
-	unsigned short st_rdev;
-	unsigned short __pad2;
-#else
-	unsigned long  st_rdev;
-#endif
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-	unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-	unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- * Note: The kernel zero's the padded region because glibc might read them
- * in the hope that the kernel has stretched to using larger sizes.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char   __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-	unsigned long	__st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char   __pad3[4];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long	st_ino;
-};
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/swab.h linux-libre-3.7-gnu/arch/arm/include/asm/swab.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/swab.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/swab.h	2012-12-10 22:30:57.000000000 -0500
@@ -15,14 +15,8 @@
 #ifndef __ASM_ARM_SWAB_H
 #define __ASM_ARM_SWAB_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __SWAB_64_THRU_32__
-#endif
+#include <uapi/asm/swab.h>
 
-#if defined(__KERNEL__)
 #if __LINUX_ARM_ARCH__ >= 6
 
 static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
@@ -42,32 +36,3 @@
 
 #endif
 #endif
-
-#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
-	__u32 t;
-
-#ifndef __thumb__
-	if (!__builtin_constant_p(x)) {
-		/*
-		 * The compiler needs a bit of a hint here to always do the
-		 * right thing and not screw it up to different degrees
-		 * depending on the gcc version.
-		 */
-		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
-	} else
-#endif
-		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
-
-	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
-	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
-	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
-
-	return x;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/sync_bitops.h linux-libre-3.7-gnu/arch/arm/include/asm/sync_bitops.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/sync_bitops.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/sync_bitops.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,27 @@
+#ifndef __ASM_SYNC_BITOPS_H__
+#define __ASM_SYNC_BITOPS_H__
+
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+/* sync_bitops functions are equivalent to the SMP implementation of the
+ * original functions, independently from CONFIG_SMP being defined.
+ *
+ * We need them because _set_bit etc are not SMP safe if !CONFIG_SMP. But
+ * under Xen you might be communicating with a completely external entity
+ * who might be on another CPU (e.g. two uniprocessor guests communicating
+ * via event channels and grant tables). So we need a variant of the bit
+ * ops which are SMP safe even on a UP kernel.
+ */
+
+#define sync_set_bit(nr, p)		_set_bit(nr, p)
+#define sync_clear_bit(nr, p)		_clear_bit(nr, p)
+#define sync_change_bit(nr, p)		_change_bit(nr, p)
+#define sync_test_and_set_bit(nr, p)	_test_and_set_bit(nr, p)
+#define sync_test_and_clear_bit(nr, p)	_test_and_clear_bit(nr, p)
+#define sync_test_and_change_bit(nr, p)	_test_and_change_bit(nr, p)
+#define sync_test_bit(nr, addr)		test_bit(nr, addr)
+#define sync_cmpxchg			cmpxchg
+
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/syscall.h linux-libre-3.7-gnu/arch/arm/include/asm/syscall.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/syscall.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/syscall.h	2012-12-10 22:30:57.000000000 -0500
@@ -8,6 +8,11 @@
 #define _ASM_ARM_SYSCALL_H
 
 #include <linux/err.h>
+#include <linux/sched.h>
+
+#include <asm/unistd.h>
+
+#define NR_syscalls (__NR_syscalls)
 
 extern const unsigned long sys_call_table[];
 
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/system.h linux-libre-3.7-gnu/arch/arm/include/asm/system.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/system.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/system.h	2012-12-10 22:30:57.000000000 -0500
@@ -2,7 +2,6 @@
 #include <asm/barrier.h>
 #include <asm/compiler.h>
 #include <asm/cmpxchg.h>
-#include <asm/exec.h>
 #include <asm/switch_to.h>
 #include <asm/system_info.h>
 #include <asm/system_misc.h>
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/termbits.h linux-libre-3.7-gnu/arch/arm/include/asm/termbits.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/termbits.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/termbits.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,198 +0,0 @@
-#ifndef __ASM_ARM_TERMBITS_H
-#define __ASM_ARM_TERMBITS_H
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR    010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	   16
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-#define EXTPROC	0200000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif	/* __ASM_ARM_TERMBITS_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/termios.h linux-libre-3.7-gnu/arch/arm/include/asm/termios.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/termios.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/termios.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,92 +0,0 @@
-#ifndef __ASM_ARM_TERMIOS_H
-#define __ASM_ARM_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
-	unsigned short __tmp;					\
-	get_user(__tmp,&(termio)->x);				\
-	*(unsigned short *) &(termios)->x = __tmp;		\
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __ASM_ARM_TERMIOS_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/thread_info.h linux-libre-3.7-gnu/arch/arm/include/asm/thread_info.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/thread_info.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/thread_info.h	2012-12-10 22:30:57.000000000 -0500
@@ -59,7 +59,9 @@
 	__u32			syscall;	/* syscall number */
 	__u8			used_cp[16];	/* thread used copro */
 	unsigned long		tp_value;
+#ifdef CONFIG_CRUNCH
 	struct crunch_state	crunchstate;
+#endif
 	union fp_state		fpstate __attribute__((aligned(8)));
 	union vfp_state		vfpstate;
 #ifdef CONFIG_ARM_THUMBEE
@@ -148,7 +150,7 @@
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
-#define TIF_POLLING_NRFLAG	16
+#define TIF_SYSCALL_TRACEPOINT	10
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20
@@ -160,12 +162,12 @@
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
 /* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/timex.h linux-libre-3.7-gnu/arch/arm/include/asm/timex.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/timex.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/timex.h	2012-12-10 22:30:57.000000000 -0500
@@ -12,15 +12,13 @@
 #ifndef _ASMARM_TIMEX_H
 #define _ASMARM_TIMEX_H
 
-#include <asm/arch_timer.h>
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+#define CLOCK_TICK_RATE 1000000
+#else
 #include <mach/timex.h>
+#endif
 
 typedef unsigned long cycles_t;
-
-#ifdef ARCH_HAS_READ_CURRENT_TIMER
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
-#else
-#define get_cycles()	(0)
-#endif
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/types.h linux-libre-3.7-gnu/arch/arm/include/asm/types.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/types.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/types.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARM_TYPES_H
-#define __ASM_ARM_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#endif /* __KERNEL__ */
-
-#endif
-
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/uaccess.h linux-libre-3.7-gnu/arch/arm/include/asm/uaccess.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/uaccess.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/uaccess.h	2012-12-10 22:30:57.000000000 -0500
@@ -200,8 +200,8 @@
 #define USER_DS			KERNEL_DS
 
 #define segment_eq(a,b)		(1)
-#define __addr_ok(addr)		(1)
-#define __range_ok(addr,size)	(0)
+#define __addr_ok(addr)		((void)(addr),1)
+#define __range_ok(addr,size)	((void)(addr),0)
 #define get_fs()		(KERNEL_DS)
 
 static inline void set_fs(mm_segment_t fs)
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/unaligned.h linux-libre-3.7-gnu/arch/arm/include/asm/unaligned.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/unaligned.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/unaligned.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-#ifndef _ASM_ARM_UNALIGNED_H
-#define _ASM_ARM_UNALIGNED_H
-
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-/*
- * Select endianness
- */
-#ifndef __ARMEB__
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-#else
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-#endif
-
-#endif /* _ASM_ARM_UNALIGNED_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/unistd.h linux-libre-3.7-gnu/arch/arm/include/asm/unistd.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/unistd.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/unistd.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,439 +13,10 @@
 #ifndef __ASM_ARM_UNISTD_H
 #define __ASM_ARM_UNISTD_H
 
-#define __NR_OABI_SYSCALL_BASE	0x900000
-
-#if defined(__thumb__) || defined(__ARM_EABI__)
-#define __NR_SYSCALL_BASE	0
-#else
-#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
-#endif
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
-#define __NR_exit			(__NR_SYSCALL_BASE+  1)
-#define __NR_fork			(__NR_SYSCALL_BASE+  2)
-#define __NR_read			(__NR_SYSCALL_BASE+  3)
-#define __NR_write			(__NR_SYSCALL_BASE+  4)
-#define __NR_open			(__NR_SYSCALL_BASE+  5)
-#define __NR_close			(__NR_SYSCALL_BASE+  6)
-					/* 7 was sys_waitpid */
-#define __NR_creat			(__NR_SYSCALL_BASE+  8)
-#define __NR_link			(__NR_SYSCALL_BASE+  9)
-#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
-#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
-#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
-#define __NR_time			(__NR_SYSCALL_BASE+ 13)
-#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
-#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
-#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
-					/* 17 was sys_break */
-					/* 18 was sys_stat */
-#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
-#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
-#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
-#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
-#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
-#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
-#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
-#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
-#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
-					/* 28 was sys_fstat */
-#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
-#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
-					/* 31 was sys_stty */
-					/* 32 was sys_gtty */
-#define __NR_access			(__NR_SYSCALL_BASE+ 33)
-#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
-					/* 35 was sys_ftime */
-#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
-#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
-#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
-#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
-#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
-#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
-#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
-#define __NR_times			(__NR_SYSCALL_BASE+ 43)
-					/* 44 was sys_prof */
-#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
-#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
-#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
-					/* 48 was sys_signal */
-#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
-#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
-#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
-#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
-					/* 53 was sys_lock */
-#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
-#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
-					/* 56 was sys_mpx */
-#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
-					/* 58 was sys_ulimit */
-					/* 59 was sys_olduname */
-#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
-#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
-#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
-#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
-#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
-#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
-#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
-#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
-					/* 68 was sys_sgetmask */
-					/* 69 was sys_ssetmask */
-#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
-#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
-#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
-#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
-#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
-#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
-#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
-#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
-#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
-#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
-#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
-#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
-#define __NR_select			(__NR_SYSCALL_BASE+ 82)
-#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
-					/* 84 was sys_lstat */
-#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
-#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
-#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
-#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
-#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
-#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
-#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
-#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
-#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
-#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
-#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
-#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
-#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
-					/* 98 was sys_profil */
-#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
-#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
-					/* 101 was sys_ioperm */
-#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
-#define __NR_syslog			(__NR_SYSCALL_BASE+103)
-#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
-#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
-#define __NR_stat			(__NR_SYSCALL_BASE+106)
-#define __NR_lstat			(__NR_SYSCALL_BASE+107)
-#define __NR_fstat			(__NR_SYSCALL_BASE+108)
-					/* 109 was sys_uname */
-					/* 110 was sys_iopl */
-#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
-					/* 112 was sys_idle */
-#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
-#define __NR_wait4			(__NR_SYSCALL_BASE+114)
-#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
-#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
-#define __NR_ipc			(__NR_SYSCALL_BASE+117)
-#define __NR_fsync			(__NR_SYSCALL_BASE+118)
-#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
-#define __NR_clone			(__NR_SYSCALL_BASE+120)
-#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
-#define __NR_uname			(__NR_SYSCALL_BASE+122)
-					/* 123 was sys_modify_ldt */
-#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
-#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
-#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
-					/* 127 was sys_create_module */
-#define __NR_init_module		(__NR_SYSCALL_BASE+128)
-#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
-					/* 130 was sys_get_kernel_syms */
-#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
-#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
-#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
-#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
-#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
-#define __NR_personality		(__NR_SYSCALL_BASE+136)
-					/* 137 was sys_afs_syscall */
-#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
-#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
-#define __NR__llseek			(__NR_SYSCALL_BASE+140)
-#define __NR_getdents			(__NR_SYSCALL_BASE+141)
-#define __NR__newselect			(__NR_SYSCALL_BASE+142)
-#define __NR_flock			(__NR_SYSCALL_BASE+143)
-#define __NR_msync			(__NR_SYSCALL_BASE+144)
-#define __NR_readv			(__NR_SYSCALL_BASE+145)
-#define __NR_writev			(__NR_SYSCALL_BASE+146)
-#define __NR_getsid			(__NR_SYSCALL_BASE+147)
-#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
-#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
-#define __NR_mlock			(__NR_SYSCALL_BASE+150)
-#define __NR_munlock			(__NR_SYSCALL_BASE+151)
-#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
-#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
-#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
-#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
-#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
-#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
-#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
-#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
-#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
-#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
-#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
-#define __NR_mremap			(__NR_SYSCALL_BASE+163)
-#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
-#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
-					/* 166 was sys_vm86 */
-					/* 167 was sys_query_module */
-#define __NR_poll			(__NR_SYSCALL_BASE+168)
-#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
-#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
-#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
-#define __NR_prctl			(__NR_SYSCALL_BASE+172)
-#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
-#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
-#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
-#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
-#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
-#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
-#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
-#define __NR_pread64			(__NR_SYSCALL_BASE+180)
-#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
-#define __NR_chown			(__NR_SYSCALL_BASE+182)
-#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
-#define __NR_capget			(__NR_SYSCALL_BASE+184)
-#define __NR_capset			(__NR_SYSCALL_BASE+185)
-#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
-#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
-					/* 188 reserved */
-					/* 189 reserved */
-#define __NR_vfork			(__NR_SYSCALL_BASE+190)
-#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
-#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
-#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
-#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
-#define __NR_stat64			(__NR_SYSCALL_BASE+195)
-#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
-#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
-#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
-#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
-#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
-#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
-#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
-#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
-#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
-#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
-#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
-#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
-#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
-#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
-#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
-#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
-#define __NR_chown32			(__NR_SYSCALL_BASE+212)
-#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
-#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
-#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
-#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
-#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
-#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
-#define __NR_mincore			(__NR_SYSCALL_BASE+219)
-#define __NR_madvise			(__NR_SYSCALL_BASE+220)
-#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
-					/* 222 for tux */
-					/* 223 is unused */
-#define __NR_gettid			(__NR_SYSCALL_BASE+224)
-#define __NR_readahead			(__NR_SYSCALL_BASE+225)
-#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
-#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
-#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
-#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
-#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
-#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
-#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
-#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
-#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
-#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
-#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
-#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
-#define __NR_tkill			(__NR_SYSCALL_BASE+238)
-#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
-#define __NR_futex			(__NR_SYSCALL_BASE+240)
-#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
-#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
-#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
-#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
-#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
-#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
-#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
-#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
-#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
-#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
-#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
-#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
-#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
-					/* 254 for set_thread_area */
-					/* 255 for get_thread_area */
-#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
-#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
-#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
-#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
-#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
-#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
-#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
-#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
-#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
-#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
-#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
-#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
-#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
-#define __NR_utimes			(__NR_SYSCALL_BASE+269)
-#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
-#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
-#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
-#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
-#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
-#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
-#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
-#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
-#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
-#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
-#define __NR_waitid			(__NR_SYSCALL_BASE+280)
-#define __NR_socket			(__NR_SYSCALL_BASE+281)
-#define __NR_bind			(__NR_SYSCALL_BASE+282)
-#define __NR_connect			(__NR_SYSCALL_BASE+283)
-#define __NR_listen			(__NR_SYSCALL_BASE+284)
-#define __NR_accept			(__NR_SYSCALL_BASE+285)
-#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
-#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
-#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
-#define __NR_send			(__NR_SYSCALL_BASE+289)
-#define __NR_sendto			(__NR_SYSCALL_BASE+290)
-#define __NR_recv			(__NR_SYSCALL_BASE+291)
-#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
-#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
-#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
-#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
-#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
-#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
-#define __NR_semop			(__NR_SYSCALL_BASE+298)
-#define __NR_semget			(__NR_SYSCALL_BASE+299)
-#define __NR_semctl			(__NR_SYSCALL_BASE+300)
-#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
-#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
-#define __NR_msgget			(__NR_SYSCALL_BASE+303)
-#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
-#define __NR_shmat			(__NR_SYSCALL_BASE+305)
-#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
-#define __NR_shmget			(__NR_SYSCALL_BASE+307)
-#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
-#define __NR_add_key			(__NR_SYSCALL_BASE+309)
-#define __NR_request_key		(__NR_SYSCALL_BASE+310)
-#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
-#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
-#define __NR_vserver			(__NR_SYSCALL_BASE+313)
-#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
-#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
-#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
-#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
-#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
-#define __NR_mbind			(__NR_SYSCALL_BASE+319)
-#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
-#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
-#define __NR_openat			(__NR_SYSCALL_BASE+322)
-#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
-#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
-#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
-#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
-#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
-#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
-#define __NR_renameat			(__NR_SYSCALL_BASE+329)
-#define __NR_linkat			(__NR_SYSCALL_BASE+330)
-#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
-#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
-#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
-#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
-#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
-#define __NR_unshare			(__NR_SYSCALL_BASE+337)
-#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
-#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
-#define __NR_splice			(__NR_SYSCALL_BASE+340)
-#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
-#define __NR_sync_file_range2		__NR_arm_sync_file_range
-#define __NR_tee			(__NR_SYSCALL_BASE+342)
-#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
-#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
-#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
-#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
-#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
-#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
-#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
-#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
-#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
-#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
-#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
-#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
-#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
-#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
-#define __NR_dup3			(__NR_SYSCALL_BASE+358)
-#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
-#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
-#define __NR_preadv			(__NR_SYSCALL_BASE+361)
-#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
-#define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
-#define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
-#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
-#define __NR_accept4			(__NR_SYSCALL_BASE+366)
-#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
-#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
-#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
-#define __NR_name_to_handle_at		(__NR_SYSCALL_BASE+370)
-#define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
-#define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
-#define __NR_syncfs			(__NR_SYSCALL_BASE+373)
-#define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
-#define __NR_setns			(__NR_SYSCALL_BASE+375)
-#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
-#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
-					/* 378 for kcmp */
-
-/*
- * The following SWIs are ARM private.
- */
-#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
-#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
-#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
-#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
-#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
-#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
+#include <uapi/asm/unistd.h>
 
-/*
- * *NOTE*: This is a ghost syscall private to the kernel.  Only the
- * __kuser_cmpxchg code in entry-armv.S should be aware of its
- * existence.  Don't ever use this from user code.
- */
-#ifdef __KERNEL__
+#define __NR_syscalls  (380)
 #define __ARM_NR_cmpxchg		(__ARM_NR_BASE+0x00fff0)
-#endif
-
-/*
- * The following syscalls are obsolete and no longer available for EABI.
- */
-#if !defined(__KERNEL__)
-#if defined(__ARM_EABI__)
-#undef __NR_time
-#undef __NR_umount
-#undef __NR_stime
-#undef __NR_alarm
-#undef __NR_utime
-#undef __NR_getrlimit
-#undef __NR_select
-#undef __NR_readdir
-#undef __NR_mmap
-#undef __NR_socketcall
-#undef __NR_syscall
-#undef __NR_ipc
-#endif
-#endif
-
-#ifdef __KERNEL__
 
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
@@ -470,6 +41,7 @@
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_SYS_SOCKETCALL
 #endif
+#define __ARCH_WANT_SYS_EXECVE
 
 /*
  * "Conditional" syscalls
@@ -486,5 +58,4 @@
 #define __IGNORE_migrate_pages
 #define __IGNORE_kcmp
 
-#endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/vfpmacros.h linux-libre-3.7-gnu/arch/arm/include/asm/vfpmacros.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/vfpmacros.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/include/asm/vfpmacros.h	2012-12-10 22:30:57.000000000 -0500
@@ -5,7 +5,7 @@
  */
 #include <asm/hwcap.h>
 
-#include "vfp.h"
+#include <asm/vfp.h>
 
 @ Macros to allow building with old toolkits (with no VFP support)
 	.macro	VFPFMRX, rd, sysreg, cond
@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/virt.h linux-libre-3.7-gnu/arch/arm/include/asm/virt.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/virt.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/virt.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2012 Linaro Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef VIRT_H
+#define VIRT_H
+
+#include <asm/ptrace.h>
+
+/*
+ * Flag indicating that the kernel was not entered in the same mode on every
+ * CPU.  The zImage loader stashes this value in an SPSR, so we need an
+ * architecturally defined flag bit here (the N flag, as it happens)
+ */
+#define BOOT_CPU_MODE_MISMATCH (1<<31)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_ARM_VIRT_EXT
+/*
+ * __boot_cpu_mode records what mode the primary CPU was booted in.
+ * A correctly-implemented bootloader must start all CPUs in the same mode:
+ * if it fails to do this, the flag BOOT_CPU_MODE_MISMATCH is set to indicate
+ * that some CPU(s) were booted in a different mode.
+ *
+ * This allows the kernel to flag an error when the secondaries have come up.
+ */
+extern int __boot_cpu_mode;
+
+void __hyp_set_vectors(unsigned long phys_vector_base);
+unsigned long __hyp_get_vectors(void);
+#else
+#define __boot_cpu_mode	(SVC_MODE)
+#endif
+
+#ifndef ZIMAGE
+void hyp_mode_check(void);
+
+/* Reports the availability of HYP mode */
+static inline bool is_hyp_mode_available(void)
+{
+	return ((__boot_cpu_mode & MODE_MASK) == HYP_MODE &&
+		!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH));
+}
+
+/* Check if the bootloader has booted CPUs in different modes */
+static inline bool is_hyp_mode_mismatched(void)
+{
+	return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH);
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* ! VIRT_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/xen/events.h linux-libre-3.7-gnu/arch/arm/include/asm/xen/events.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/xen/events.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/xen/events.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,18 @@
+#ifndef _ASM_ARM_XEN_EVENTS_H
+#define _ASM_ARM_XEN_EVENTS_H
+
+#include <asm/ptrace.h>
+
+enum ipi_vector {
+	XEN_PLACEHOLDER_VECTOR,
+
+	/* Xen IPIs go here */
+	XEN_NR_IPIS,
+};
+
+static inline int xen_irqs_disabled(struct pt_regs *regs)
+{
+	return raw_irqs_disabled_flags(regs->ARM_cpsr);
+}
+
+#endif /* _ASM_ARM_XEN_EVENTS_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/xen/hypercall.h linux-libre-3.7-gnu/arch/arm/include/asm/xen/hypercall.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/xen/hypercall.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/xen/hypercall.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,69 @@
+/******************************************************************************
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_ARM_XEN_HYPERCALL_H
+#define _ASM_ARM_XEN_HYPERCALL_H
+
+#include <xen/interface/xen.h>
+
+long privcmd_call(unsigned call, unsigned long a1,
+		unsigned long a2, unsigned long a3,
+		unsigned long a4, unsigned long a5);
+int HYPERVISOR_xen_version(int cmd, void *arg);
+int HYPERVISOR_console_io(int cmd, int count, char *str);
+int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count);
+int HYPERVISOR_sched_op(int cmd, void *arg);
+int HYPERVISOR_event_channel_op(int cmd, void *arg);
+unsigned long HYPERVISOR_hvm_op(int op, void *arg);
+int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
+int HYPERVISOR_physdev_op(int cmd, void *arg);
+
+static inline void
+MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
+			unsigned int new_val, unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
+		 int count, int *success_count, domid_t domid)
+{
+	BUG();
+}
+
+static inline int
+HYPERVISOR_multicall(void *call_list, int nr_calls)
+{
+	BUG();
+}
+#endif /* _ASM_ARM_XEN_HYPERCALL_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/xen/hypervisor.h linux-libre-3.7-gnu/arch/arm/include/asm/xen/hypervisor.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/xen/hypervisor.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/xen/hypervisor.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,19 @@
+#ifndef _ASM_ARM_XEN_HYPERVISOR_H
+#define _ASM_ARM_XEN_HYPERVISOR_H
+
+extern struct shared_info *HYPERVISOR_shared_info;
+extern struct start_info *xen_start_info;
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+	PARAVIRT_LAZY_NONE,
+	PARAVIRT_LAZY_MMU,
+	PARAVIRT_LAZY_CPU,
+};
+
+static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
+{
+	return PARAVIRT_LAZY_NONE;
+}
+
+#endif /* _ASM_ARM_XEN_HYPERVISOR_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/xen/interface.h linux-libre-3.7-gnu/arch/arm/include/asm/xen/interface.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/xen/interface.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/xen/interface.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,79 @@
+/******************************************************************************
+ * Guest OS interface to ARM Xen.
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ */
+
+#ifndef _ASM_ARM_XEN_INTERFACE_H
+#define _ASM_ARM_XEN_INTERFACE_H
+
+#include <linux/types.h>
+
+#define uint64_aligned_t uint64_t __attribute__((aligned(8)))
+
+#define __DEFINE_GUEST_HANDLE(name, type) \
+	typedef struct { union { type *p; uint64_aligned_t q; }; }  \
+        __guest_handle_ ## name
+
+#define DEFINE_GUEST_HANDLE_STRUCT(name) \
+	__DEFINE_GUEST_HANDLE(name, struct name)
+#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name)
+#define GUEST_HANDLE(name)        __guest_handle_ ## name
+
+#define set_xen_guest_handle(hnd, val)			\
+	do {						\
+		if (sizeof(hnd) == 8)			\
+			*(uint64_t *)&(hnd) = 0;	\
+		(hnd).p = val;				\
+	} while (0)
+
+#ifndef __ASSEMBLY__
+/* Explicitly size integers that represent pfns in the interface with
+ * Xen so that we can have one ABI that works for 32 and 64 bit guests.
+ * Note that this means that the xen_pfn_t type may be capable of
+ * representing pfn's which the guest cannot represent in its own pfn
+ * type. However since pfn space is controlled by the guest this is
+ * fine since it simply wouldn't be able to create any sure pfns in
+ * the first place.
+ */
+typedef uint64_t xen_pfn_t;
+#define PRI_xen_pfn "llx"
+typedef uint64_t xen_ulong_t;
+#define PRI_xen_ulong "llx"
+/* Guest handles for primitive C types. */
+__DEFINE_GUEST_HANDLE(uchar, unsigned char);
+__DEFINE_GUEST_HANDLE(uint,  unsigned int);
+DEFINE_GUEST_HANDLE(char);
+DEFINE_GUEST_HANDLE(int);
+DEFINE_GUEST_HANDLE(void);
+DEFINE_GUEST_HANDLE(uint64_t);
+DEFINE_GUEST_HANDLE(uint32_t);
+DEFINE_GUEST_HANDLE(xen_pfn_t);
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 1
+
+struct arch_vcpu_info { };
+struct arch_shared_info { };
+
+/* TODO: Move pvclock definitions some place arch independent */
+struct pvclock_vcpu_time_info {
+	u32   version;
+	u32   pad0;
+	u64   tsc_timestamp;
+	u64   system_time;
+	u32   tsc_to_system_mul;
+	s8    tsc_shift;
+	u8    flags;
+	u8    pad[2];
+} __attribute__((__packed__)); /* 32 bytes */
+
+/* It is OK to have a 12 bytes struct with no padding because it is packed */
+struct pvclock_wall_clock {
+	u32   version;
+	u32   sec;
+	u32   nsec;
+} __attribute__((__packed__));
+#endif
+
+#endif /* _ASM_ARM_XEN_INTERFACE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/asm/xen/page.h linux-libre-3.7-gnu/arch/arm/include/asm/xen/page.h
--- linux-libre-3.6-gnu/arch/arm/include/asm/xen/page.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/asm/xen/page.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,89 @@
+#ifndef _ASM_ARM_XEN_PAGE_H
+#define _ASM_ARM_XEN_PAGE_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#include <linux/pfn.h>
+#include <linux/types.h>
+
+#include <xen/interface/grant_table.h>
+
+#define pfn_to_mfn(pfn)			(pfn)
+#define phys_to_machine_mapping_valid(pfn) (1)
+#define mfn_to_pfn(mfn)			(mfn)
+#define mfn_to_virt(m)			(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+
+#define pte_mfn	    pte_pfn
+#define mfn_pte	    pfn_pte
+
+/* Xen machine address */
+typedef struct xmaddr {
+	phys_addr_t maddr;
+} xmaddr_t;
+
+/* Xen pseudo-physical address */
+typedef struct xpaddr {
+	phys_addr_t paddr;
+} xpaddr_t;
+
+#define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
+#define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
+
+#define INVALID_P2M_ENTRY      (~0UL)
+
+static inline xmaddr_t phys_to_machine(xpaddr_t phys)
+{
+	unsigned offset = phys.paddr & ~PAGE_MASK;
+	return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset);
+}
+
+static inline xpaddr_t machine_to_phys(xmaddr_t machine)
+{
+	unsigned offset = machine.maddr & ~PAGE_MASK;
+	return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset);
+}
+/* VIRT <-> MACHINE conversion */
+#define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
+#define virt_to_pfn(v)          (PFN_DOWN(__pa(v)))
+#define virt_to_mfn(v)		(pfn_to_mfn(virt_to_pfn(v)))
+#define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+
+static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr)
+{
+	/* TODO: assuming it is mapped in the kernel 1:1 */
+	return virt_to_machine(vaddr);
+}
+
+/* TODO: this shouldn't be here but it is because the frontend drivers
+ * are using it (its rolled in headers) even though we won't hit the code path.
+ * So for right now just punt with this.
+ */
+static inline pte_t *lookup_address(unsigned long address, unsigned int *level)
+{
+	BUG();
+	return NULL;
+}
+
+static inline int m2p_add_override(unsigned long mfn, struct page *page,
+		struct gnttab_map_grant_ref *kmap_op)
+{
+	return 0;
+}
+
+static inline int m2p_remove_override(struct page *page, bool clear_pte)
+{
+	return 0;
+}
+
+static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+	return true;
+}
+
+static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	return __set_phys_to_machine(pfn, mfn);
+}
+#endif /* _ASM_ARM_XEN_PAGE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/debug/8250_32.S linux-libre-3.7-gnu/arch/arm/include/debug/8250_32.S
--- linux-libre-3.6-gnu/arch/arm/include/debug/8250_32.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/debug/8250_32.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+
+#include <linux/serial_reg.h>
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		/* The UART's don't have any flow control IO's wired up. */
+		.macro	waituart,rd,rx
+		.endm
diff -druN linux-libre-3.6-gnu/arch/arm/include/debug/highbank.S linux-libre-3.7-gnu/arch/arm/include/debug/highbank.S
--- linux-libre-3.6-gnu/arch/arm/include/debug/highbank.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/debug/highbank.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,17 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart,rp,rv,tmp
+		ldr	\rv, =0xfee36000
+		ldr	\rp, =0xfff36000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff -druN linux-libre-3.6-gnu/arch/arm/include/debug/icedcc.S linux-libre-3.7-gnu/arch/arm/include/debug/icedcc.S
--- linux-libre-3.6-gnu/arch/arm/include/debug/icedcc.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/debug/icedcc.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,90 @@
+/*
+ *  arch/arm/include/debug/icedcc.S
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+		@@ debug using ARM EmbeddedICE DCC channel
+
+		.macro	addruart, rp, rv, tmp
+		.endm
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		beq	1001b
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		bne	1001b
+1002:
+		.endm
+
+#elif defined(CONFIG_CPU_XSCALE)
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c8, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		beq	1001b
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x10000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		bne	1001b
+1002:
+		.endm
+
+#else
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c1, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		beq	1001b
+
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		bne	1001b
+1002:
+		.endm
+
+#endif	/* CONFIG_CPU_V6 */
diff -druN linux-libre-3.6-gnu/arch/arm/include/debug/mvebu.S linux-libre-3.7-gnu/arch/arm/include/debug/mvebu.S
--- linux-libre-3.6-gnu/arch/arm/include/debug/mvebu.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/debug/mvebu.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,25 @@
+/*
+ * Early serial output macro for Marvell  SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =ARMADA_370_XP_REGS_PHYS_BASE
+	ldr	\rv, =ARMADA_370_XP_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff -druN linux-libre-3.6-gnu/arch/arm/include/debug/picoxcell.S linux-libre-3.7-gnu/arch/arm/include/debug/picoxcell.S
--- linux-libre-3.6-gnu/arch/arm/include/debug/picoxcell.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/debug/picoxcell.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define UART_SHIFT 2
+#define PICOXCELL_UART1_BASE		0x80230000
+#define PHYS_TO_IO(x)			(((x) & 0x00ffffff) | 0xfe000000)
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+		ldr	\rp, =PICOXCELL_UART1_BASE
+		.endm
+
+#include "8250_32.S"
diff -druN linux-libre-3.6-gnu/arch/arm/include/debug/socfpga.S linux-libre-3.7-gnu/arch/arm/include/debug/socfpga.S
--- linux-libre-3.6-gnu/arch/arm/include/debug/socfpga.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/debug/socfpga.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,21 @@
+/*
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define UART_SHIFT 2
+#define DEBUG_LL_UART_OFFSET	0x00002000
+
+		.macro	addruart, rp, rv, tmp
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rp, \rp, #0x00c00000
+		orr	\rv, \rp, #0xfe000000	@ virtual base
+		orr	\rp, \rp, #0xff000000	@ physical base
+		.endm
+
+#include "8250_32.S"
+
diff -druN linux-libre-3.6-gnu/arch/arm/include/debug/vexpress.S linux-libre-3.7-gnu/arch/arm/include/debug/vexpress.S
--- linux-libre-3.6-gnu/arch/arm/include/debug/vexpress.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/debug/vexpress.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,84 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG_LL_PHYS_BASE		0x10000000
+#define DEBUG_LL_UART_OFFSET		0x00009000
+
+#define DEBUG_LL_PHYS_BASE_RS1		0x1c000000
+#define DEBUG_LL_UART_OFFSET_RS1	0x00090000
+
+#define DEBUG_LL_VIRT_BASE		0xf8000000
+
+#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
+
+		.macro	addruart,rp,rv,tmp
+
+		@ Make an educated guess regarding the memory map:
+		@ - the original A9 core tile, which has MPCore peripherals
+		@   located at 0x1e000000, should use UART at 0x10009000
+		@ - all other (RS1 complaint) tiles use UART mapped
+		@   at 0x1c090000
+		mrc	p15, 4, \tmp, c15, c0, 0
+		cmp	\tmp, #0x1e000000
+
+		@ Original memory map
+		moveq	\rp, #DEBUG_LL_UART_OFFSET
+		orreq	\rv, \rp, #DEBUG_LL_VIRT_BASE
+		orreq	\rp, \rp, #DEBUG_LL_PHYS_BASE
+
+		@ RS1 memory map
+		movne	\rp, #DEBUG_LL_UART_OFFSET_RS1
+		orrne	\rv, \rp, #DEBUG_LL_VIRT_BASE
+		orrne	\rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
+
+		.macro	addruart,rp,rv,tmp
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rv, \rp, #DEBUG_LL_VIRT_BASE
+		orr	\rp, \rp, #DEBUG_LL_PHYS_BASE
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
+
+		.macro	addruart,rp,rv,tmp
+		mov	\rp, #DEBUG_LL_UART_OFFSET_RS1
+		orr	\rv, \rp, #DEBUG_LL_VIRT_BASE
+		orr	\rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#else /* CONFIG_DEBUG_LL_UART_NONE */
+
+		.macro	addruart, rp, rv, tmp
+		/* Safe dummy values */
+		mov	\rp, #0
+		mov	\rv, #DEBUG_LL_VIRT_BASE
+		.endm
+
+		.macro	senduart,rd,rx
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+		.endm
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/a.out.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/a.out.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/a.out.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/a.out.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,34 @@
+#ifndef __ARM_A_OUT_H__
+#define __ARM_A_OUT_H__
+
+#include <linux/personality.h>
+#include <linux/types.h>
+
+struct exec
+{
+  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
+  __u32 a_text;		/* length of text, in bytes */
+  __u32 a_data;		/* length of data, in bytes */
+  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
+  __u32 a_syms;		/* length of symbol table data in file, in bytes */
+  __u32 a_entry;	/* start address */
+  __u32 a_trsize;	/* length of relocation info for text, in bytes */
+  __u32 a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+/*
+ * This is always the same
+ */
+#define N_TXTADDR(a)	(0x00008000)
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#define M_ARM 103
+
+#ifndef LIBRARY_START_TEXT
+#define LIBRARY_START_TEXT	(0x00c00000)
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/byteorder.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/byteorder.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/byteorder.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/byteorder.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/include/asm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif
+
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/fcntl.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/fcntl.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/fcntl.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/fcntl.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,11 @@
+#ifndef _ARM_FCNTL_H
+#define _ARM_FCNTL_H
+
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/hwcap.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/hwcap.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/hwcap.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/hwcap.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,30 @@
+#ifndef _UAPI__ASMARM_HWCAP_H
+#define _UAPI__ASMARM_HWCAP_H
+
+/*
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
+ */
+#define HWCAP_SWP	(1 << 0)
+#define HWCAP_HALF	(1 << 1)
+#define HWCAP_THUMB	(1 << 2)
+#define HWCAP_26BIT	(1 << 3)	/* Play it safe */
+#define HWCAP_FAST_MULT	(1 << 4)
+#define HWCAP_FPA	(1 << 5)
+#define HWCAP_VFP	(1 << 6)
+#define HWCAP_EDSP	(1 << 7)
+#define HWCAP_JAVA	(1 << 8)
+#define HWCAP_IWMMXT	(1 << 9)
+#define HWCAP_CRUNCH	(1 << 10)
+#define HWCAP_THUMBEE	(1 << 11)
+#define HWCAP_NEON	(1 << 12)
+#define HWCAP_VFPv3	(1 << 13)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
+#define HWCAP_TLS	(1 << 15)
+#define HWCAP_VFPv4	(1 << 16)
+#define HWCAP_IDIVA	(1 << 17)
+#define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
+#define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
+
+
+#endif /* _UAPI__ASMARM_HWCAP_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/ioctls.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/ioctls.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/ioctls.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/ioctls.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,8 @@
+#ifndef __ASM_ARM_IOCTLS_H
+#define __ASM_ARM_IOCTLS_H
+
+#define FIOQSIZE	0x545E
+
+#include <asm-generic/ioctls.h>
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/Kbuild linux-libre-3.7-gnu/arch/arm/include/uapi/asm/Kbuild
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/Kbuild	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/Kbuild	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,19 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+header-y += a.out.h
+header-y += byteorder.h
+header-y += fcntl.h
+header-y += hwcap.h
+header-y += ioctls.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += setup.h
+header-y += sigcontext.h
+header-y += signal.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += unistd.h
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/kvm_para.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/kvm_para.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/kvm_para.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/kvm_para.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1 @@
+#include <asm-generic/kvm_para.h>
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/mman.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/mman.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/mman.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/mman.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,4 @@
+#include <asm-generic/mman.h>
+
+#define arch_mmap_check(addr, len, flags) \
+	(((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0)
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/posix_types.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/posix_types.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/posix_types.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/posix_types.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/include/asm/posix_types.h
+ *
+ *  Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short		__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
+typedef unsigned short		__kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+#define __kernel_uid_t __kernel_uid_t
+
+typedef unsigned short		__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/ptrace.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/ptrace.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/ptrace.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/ptrace.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,138 @@
+/*
+ *  arch/arm/include/asm/ptrace.h
+ *
+ *  Copyright (C) 1996-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__ASM_ARM_PTRACE_H
+#define _UAPI__ASM_ARM_PTRACE_H
+
+#include <asm/hwcap.h>
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+/* PTRACE_ATTACH is 16 */
+/* PTRACE_DETACH is 17 */
+#define PTRACE_GETWMMXREGS	18
+#define PTRACE_SETWMMXREGS	19
+/* 20 is unused */
+#define PTRACE_OLDSETOPTIONS	21
+#define PTRACE_GET_THREAD_AREA	22
+#define PTRACE_SET_SYSCALL	23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETCRUNCHREGS	25
+#define PTRACE_SETCRUNCHREGS	26
+#define PTRACE_GETVFPREGS	27
+#define PTRACE_SETVFPREGS	28
+#define PTRACE_GETHBPREGS	29
+#define PTRACE_SETHBPREGS	30
+
+/*
+ * PSR bits
+ */
+#define USR26_MODE	0x00000000
+#define FIQ26_MODE	0x00000001
+#define IRQ26_MODE	0x00000002
+#define SVC26_MODE	0x00000003
+#define USR_MODE	0x00000010
+#define FIQ_MODE	0x00000011
+#define IRQ_MODE	0x00000012
+#define SVC_MODE	0x00000013
+#define ABT_MODE	0x00000017
+#define HYP_MODE	0x0000001a
+#define UND_MODE	0x0000001b
+#define SYSTEM_MODE	0x0000001f
+#define MODE32_BIT	0x00000010
+#define MODE_MASK	0x0000001f
+#define PSR_T_BIT	0x00000020
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
+#define PSR_J_BIT	0x01000000
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+/*
+ * ARMv7 groups of PSR bits
+ */
+#define APSR_MASK	0xf80f0000	/* N, Z, C, V, Q and GE flags */
+#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
+#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE	PSR_E_BIT
+#else
+#define PSR_ENDSTATE	0
+#endif
+
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.  Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+#ifndef __KERNEL__
+struct pt_regs {
+	long uregs[18];
+};
+#endif /* __KERNEL__ */
+
+#define ARM_cpsr	uregs[16]
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[17]
+
+/*
+ * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
+ * and core dumps.
+ */
+#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI__ASM_ARM_PTRACE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/setup.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/setup.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/setup.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/setup.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,187 @@
+/*
+ *  linux/include/asm/setup.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Structure passed to kernel to tell it about the
+ *  hardware it's running on.  See Documentation/arm/Setup
+ *  for more info.
+ */
+#ifndef _UAPI__ASMARM_SETUP_H
+#define _UAPI__ASMARM_SETUP_H
+
+#include <linux/types.h>
+
+#define COMMAND_LINE_SIZE 1024
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	__u32 size;
+	__u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	__u32 flags;		/* bit 0 = read-only */
+	__u32 pagesize;
+	__u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+
+struct tag_mem32 {
+	__u32	size;
+	__u32	start;	/* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT	0x54410003
+
+struct tag_videotext {
+	__u8		x;
+	__u8		y;
+	__u16		video_page;
+	__u8		video_mode;
+	__u8		video_cols;
+	__u16		video_ega_bx;
+	__u8		video_lines;
+	__u8		video_isvga;
+	__u16		video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK	0x54410004
+
+struct tag_ramdisk {
+	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
+	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
+	__u32 start;	/* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives (virtual address) */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * it's deprecated.
+ */
+#define ATAG_INITRD	0x54410005
+
+/* describes where the compressed ramdisk image lives (physical address) */
+#define ATAG_INITRD2	0x54420005
+
+struct tag_initrd {
+	__u32 start;	/* physical start address */
+	__u32 size;	/* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL	0x54410006
+
+struct tag_serialnr {
+	__u32 low;
+	__u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION	0x54410007
+
+struct tag_revision {
+	__u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB	0x54410008
+
+struct tag_videolfb {
+	__u16		lfb_width;
+	__u16		lfb_height;
+	__u16		lfb_depth;
+	__u16		lfb_linelength;
+	__u32		lfb_base;
+	__u32		lfb_size;
+	__u8		red_size;
+	__u8		red_pos;
+	__u8		green_size;
+	__u8		green_pos;
+	__u8		blue_size;
+	__u8		blue_pos;
+	__u8		rsvd_size;
+	__u8		rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410009
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN	0x41000101
+
+struct tag_acorn {
+	__u32 memc_control_reg;
+	__u32 vram_pages;
+	__u8 sounddefault;
+	__u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK	0x41000402
+
+struct tag_memclk {
+	__u32 fmemclk;
+};
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core		core;
+		struct tag_mem32	mem;
+		struct tag_videotext	videotext;
+		struct tag_ramdisk	ramdisk;
+		struct tag_initrd	initrd;
+		struct tag_serialnr	serialnr;
+		struct tag_revision	revision;
+		struct tag_videolfb	videolfb;
+		struct tag_cmdline	cmdline;
+
+		/*
+		 * Acorn specific
+		 */
+		struct tag_acorn	acorn;
+
+		/*
+		 * DC21285 specific
+		 */
+		struct tag_memclk	memclk;
+	} u;
+};
+
+struct tagtable {
+	__u32 tag;
+	int (*parse)(const struct tag *);
+};
+
+#define tag_member_present(tag,member)				\
+	((unsigned long)(&((struct tag *)0L)->member + 1)	\
+		<= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)		\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+
+#endif /* _UAPI__ASMARM_SETUP_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/sigcontext.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/sigcontext.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/sigcontext.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/sigcontext.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,34 @@
+#ifndef _ASMARM_SIGCONTEXT_H
+#define _ASMARM_SIGCONTEXT_H
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	unsigned long trap_no;
+	unsigned long error_code;
+	unsigned long oldmask;
+	unsigned long arm_r0;
+	unsigned long arm_r1;
+	unsigned long arm_r2;
+	unsigned long arm_r3;
+	unsigned long arm_r4;
+	unsigned long arm_r5;
+	unsigned long arm_r6;
+	unsigned long arm_r7;
+	unsigned long arm_r8;
+	unsigned long arm_r9;
+	unsigned long arm_r10;
+	unsigned long arm_fp;
+	unsigned long arm_ip;
+	unsigned long arm_sp;
+	unsigned long arm_lr;
+	unsigned long arm_pc;
+	unsigned long arm_cpsr;
+	unsigned long fault_address;
+};
+
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/signal.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/signal.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/signal.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/signal.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,127 @@
+#ifndef _UAPI_ASMARM_SIGNAL_H
+#define _UAPI_ASMARM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+#define SIGSWI		32
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
+ *			is running in 26-bit.
+ * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_THIRTYTWO	0x02000000
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+
+#endif /* _UAPI_ASMARM_SIGNAL_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/statfs.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/statfs.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/statfs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/statfs.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,12 @@
+#ifndef _ASMARM_STATFS_H
+#define _ASMARM_STATFS_H
+
+/*
+ * With EABI there is 4 bytes of padding added to this structure.
+ * Let's pack it so the padding goes away to simplify dual ABI support.
+ * Note that user space does NOT have to pack this structure.
+ */
+#define ARCH_PACK_STATFS64 __attribute__((packed,aligned(4)))
+
+#include <asm-generic/statfs.h>
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/stat.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/stat.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/stat.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/stat.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,87 @@
+#ifndef _ASMARM_STAT_H
+#define _ASMARM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#define STAT_HAVE_NSEC 
+
+struct stat {
+#if defined(__ARMEB__)
+	unsigned short st_dev;
+	unsigned short __pad1;
+#else
+	unsigned long  st_dev;
+#endif
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+#if defined(__ARMEB__)
+	unsigned short st_rdev;
+	unsigned short __pad2;
+#else
+	unsigned long  st_rdev;
+#endif
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ * Note: The kernel zero's the padded region because glibc might read them
+ * in the hope that the kernel has stretched to using larger sizes.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char   __pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/swab.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/swab.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/swab.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/swab.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,53 @@
+/*
+ *  arch/arm/include/asm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef _UAPI__ASM_ARM_SWAB_H
+#define _UAPI__ASM_ARM_SWAB_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+
+
+#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__u32 t;
+
+#ifndef __thumb__
+	if (!__builtin_constant_p(x)) {
+		/*
+		 * The compiler needs a bit of a hint here to always do the
+		 * right thing and not screw it up to different degrees
+		 * depending on the gcc version.
+		 */
+		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
+	} else
+#endif
+		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
+
+	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
+	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
+	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
+
+	return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#endif
+
+#endif /* _UAPI__ASM_ARM_SWAB_H */
diff -druN linux-libre-3.6-gnu/arch/arm/include/uapi/asm/unistd.h linux-libre-3.7-gnu/arch/arm/include/uapi/asm/unistd.h
--- linux-libre-3.6-gnu/arch/arm/include/uapi/asm/unistd.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/include/uapi/asm/unistd.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,450 @@
+/*
+ *  arch/arm/include/asm/unistd.h
+ *
+ *  Copyright (C) 2001-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
+ * no matter what the change is.  Thanks!
+ */
+#ifndef _UAPI__ASM_ARM_UNISTD_H
+#define _UAPI__ASM_ARM_UNISTD_H
+
+#define __NR_OABI_SYSCALL_BASE	0x900000
+
+#if defined(__thumb__) || defined(__ARM_EABI__)
+#define __NR_SYSCALL_BASE	0
+#else
+#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
+#endif
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
+#define __NR_exit			(__NR_SYSCALL_BASE+  1)
+#define __NR_fork			(__NR_SYSCALL_BASE+  2)
+#define __NR_read			(__NR_SYSCALL_BASE+  3)
+#define __NR_write			(__NR_SYSCALL_BASE+  4)
+#define __NR_open			(__NR_SYSCALL_BASE+  5)
+#define __NR_close			(__NR_SYSCALL_BASE+  6)
+					/* 7 was sys_waitpid */
+#define __NR_creat			(__NR_SYSCALL_BASE+  8)
+#define __NR_link			(__NR_SYSCALL_BASE+  9)
+#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
+#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
+#define __NR_time			(__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
+					/* 17 was sys_break */
+					/* 18 was sys_stat */
+#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
+#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
+#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
+#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
+					/* 28 was sys_fstat */
+#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
+#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
+					/* 31 was sys_stty */
+					/* 32 was sys_gtty */
+#define __NR_access			(__NR_SYSCALL_BASE+ 33)
+#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
+					/* 35 was sys_ftime */
+#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
+#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
+#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
+#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
+#define __NR_times			(__NR_SYSCALL_BASE+ 43)
+					/* 44 was sys_prof */
+#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
+					/* 48 was sys_signal */
+#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
+#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
+					/* 53 was sys_lock */
+#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
+					/* 56 was sys_mpx */
+#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
+					/* 58 was sys_ulimit */
+					/* 59 was sys_olduname */
+#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
+					/* 68 was sys_sgetmask */
+					/* 69 was sys_ssetmask */
+#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
+#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
+#define __NR_select			(__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
+					/* 84 was sys_lstat */
+#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
+					/* 98 was sys_profil */
+#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
+					/* 101 was sys_ioperm */
+#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
+#define __NR_syslog			(__NR_SYSCALL_BASE+103)
+#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
+#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
+#define __NR_stat			(__NR_SYSCALL_BASE+106)
+#define __NR_lstat			(__NR_SYSCALL_BASE+107)
+#define __NR_fstat			(__NR_SYSCALL_BASE+108)
+					/* 109 was sys_uname */
+					/* 110 was sys_iopl */
+#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
+					/* 112 was sys_idle */
+#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4			(__NR_SYSCALL_BASE+114)
+#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
+#define __NR_ipc			(__NR_SYSCALL_BASE+117)
+#define __NR_fsync			(__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
+#define __NR_clone			(__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
+#define __NR_uname			(__NR_SYSCALL_BASE+122)
+					/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
+#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
+					/* 127 was sys_create_module */
+#define __NR_init_module		(__NR_SYSCALL_BASE+128)
+#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
+					/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
+#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
+#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
+#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
+#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
+#define __NR_personality		(__NR_SYSCALL_BASE+136)
+					/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
+#define __NR__llseek			(__NR_SYSCALL_BASE+140)
+#define __NR_getdents			(__NR_SYSCALL_BASE+141)
+#define __NR__newselect			(__NR_SYSCALL_BASE+142)
+#define __NR_flock			(__NR_SYSCALL_BASE+143)
+#define __NR_msync			(__NR_SYSCALL_BASE+144)
+#define __NR_readv			(__NR_SYSCALL_BASE+145)
+#define __NR_writev			(__NR_SYSCALL_BASE+146)
+#define __NR_getsid			(__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
+#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
+#define __NR_mlock			(__NR_SYSCALL_BASE+150)
+#define __NR_munlock			(__NR_SYSCALL_BASE+151)
+#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
+#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
+#define __NR_mremap			(__NR_SYSCALL_BASE+163)
+#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
+#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
+					/* 166 was sys_vm86 */
+					/* 167 was sys_query_module */
+#define __NR_poll			(__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
+#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
+#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
+#define __NR_prctl			(__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
+#define __NR_pread64			(__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
+#define __NR_chown			(__NR_SYSCALL_BASE+182)
+#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
+#define __NR_capget			(__NR_SYSCALL_BASE+184)
+#define __NR_capset			(__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
+#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
+					/* 188 reserved */
+					/* 189 reserved */
+#define __NR_vfork			(__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
+#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
+#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
+#define __NR_stat64			(__NR_SYSCALL_BASE+195)
+#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
+#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
+#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
+#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
+#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
+#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
+#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
+#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
+#define __NR_chown32			(__NR_SYSCALL_BASE+212)
+#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
+#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
+#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
+#define __NR_mincore			(__NR_SYSCALL_BASE+219)
+#define __NR_madvise			(__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
+					/* 222 for tux */
+					/* 223 is unused */
+#define __NR_gettid			(__NR_SYSCALL_BASE+224)
+#define __NR_readahead			(__NR_SYSCALL_BASE+225)
+#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
+#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
+#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
+#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
+#define __NR_tkill			(__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
+#define __NR_futex			(__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
+#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
+#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
+#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
+					/* 254 for set_thread_area */
+					/* 255 for get_thread_area */
+#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
+#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
+#define __NR_waitid			(__NR_SYSCALL_BASE+280)
+#define __NR_socket			(__NR_SYSCALL_BASE+281)
+#define __NR_bind			(__NR_SYSCALL_BASE+282)
+#define __NR_connect			(__NR_SYSCALL_BASE+283)
+#define __NR_listen			(__NR_SYSCALL_BASE+284)
+#define __NR_accept			(__NR_SYSCALL_BASE+285)
+#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
+#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
+#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
+#define __NR_send			(__NR_SYSCALL_BASE+289)
+#define __NR_sendto			(__NR_SYSCALL_BASE+290)
+#define __NR_recv			(__NR_SYSCALL_BASE+291)
+#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
+#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
+#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
+#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
+#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
+#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
+#define __NR_semop			(__NR_SYSCALL_BASE+298)
+#define __NR_semget			(__NR_SYSCALL_BASE+299)
+#define __NR_semctl			(__NR_SYSCALL_BASE+300)
+#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
+#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
+#define __NR_msgget			(__NR_SYSCALL_BASE+303)
+#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
+#define __NR_shmat			(__NR_SYSCALL_BASE+305)
+#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
+#define __NR_shmget			(__NR_SYSCALL_BASE+307)
+#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
+#define __NR_add_key			(__NR_SYSCALL_BASE+309)
+#define __NR_request_key		(__NR_SYSCALL_BASE+310)
+#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
+#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
+#define __NR_vserver			(__NR_SYSCALL_BASE+313)
+#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
+#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
+#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
+#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
+#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
+#define __NR_mbind			(__NR_SYSCALL_BASE+319)
+#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
+#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
+#define __NR_openat			(__NR_SYSCALL_BASE+322)
+#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
+#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
+#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
+#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
+#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
+#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
+#define __NR_renameat			(__NR_SYSCALL_BASE+329)
+#define __NR_linkat			(__NR_SYSCALL_BASE+330)
+#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
+#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
+#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
+#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
+#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
+#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
+#define __NR_unshare			(__NR_SYSCALL_BASE+337)
+#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
+#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
+#define __NR_splice			(__NR_SYSCALL_BASE+340)
+#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
+#define __NR_sync_file_range2		__NR_arm_sync_file_range
+#define __NR_tee			(__NR_SYSCALL_BASE+342)
+#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
+#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
+#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
+#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
+#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
+#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
+#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
+#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
+#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
+#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
+#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
+#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
+#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
+#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
+#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
+#define __NR_dup3			(__NR_SYSCALL_BASE+358)
+#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
+#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+#define __NR_preadv			(__NR_SYSCALL_BASE+361)
+#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
+#define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
+#define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
+#define __NR_accept4			(__NR_SYSCALL_BASE+366)
+#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
+#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
+#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
+#define __NR_name_to_handle_at		(__NR_SYSCALL_BASE+370)
+#define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
+#define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
+#define __NR_syncfs			(__NR_SYSCALL_BASE+373)
+#define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
+#define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
+					/* 378 for kcmp */
+
+/*
+ * This may need to be greater than __NR_last_syscall+1 in order to
+ * account for the padding in the syscall table
+ */
+
+/*
+ * The following SWIs are ARM private.
+ */
+#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
+#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
+#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
+#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
+
+/*
+ * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence.  Don't ever use this from user code.
+ */
+
+/*
+ * The following syscalls are obsolete and no longer available for EABI.
+ */
+#if !defined(__KERNEL__)
+#if defined(__ARM_EABI__)
+#undef __NR_time
+#undef __NR_umount
+#undef __NR_stime
+#undef __NR_alarm
+#undef __NR_utime
+#undef __NR_getrlimit
+#undef __NR_select
+#undef __NR_readdir
+#undef __NR_mmap
+#undef __NR_socketcall
+#undef __NR_syscall
+#undef __NR_ipc
+#endif
+#endif
+
+#endif /* _UAPI__ASM_ARM_UNISTD_H */
diff -druN linux-libre-3.6-gnu/arch/arm/Kconfig linux-libre-3.7-gnu/arch/arm/Kconfig
--- linux-libre-3.6-gnu/arch/arm/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,54 +1,60 @@
 config ARM
 	bool
 	default y
+	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAVE_CUSTOM_GPIO_H
-	select HAVE_AOUT
-	select HAVE_DMA_API_DEBUG
-	select HAVE_IDE if PCI || ISA || PCMCIA
-	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_MEMBLOCK
-	select RTC_LIB
-	select SYS_SUPPORTS_APM_EMULATION
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
 	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
+	select HARDIRQS_SW_RESEND
+	select HAVE_AOUT
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_KPROBES if !XIP_KERNEL
-	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
-	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+	select HAVE_BPF_JIT
+	select HAVE_C_RECORDMCOUNT
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
+	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
+	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_IRQ_WORK
 	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
-	select HAVE_IRQ_WORK
+	select HAVE_KPROBES if !XIP_KERNEL
+	select HAVE_KRETPROBES if (HAVE_KPROBES)
+	select HAVE_MEMBLOCK
+	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_PERF_EVENTS
-	select PERF_USE_VMALLOC
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
-	select HAVE_C_RECORDMCOUNT
-	select HAVE_GENERIC_HARDIRQS
-	select HARDIRQS_SW_RESEND
-	select GENERIC_IRQ_PROBE
-	select GENERIC_IRQ_SHOW
-	select ARCH_WANT_IPC_PARSE_VERSION
-	select HARDIRQS_SW_RESEND
-	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select GENERIC_PCI_IOMAP
-	select HAVE_BPF_JIT
-	select GENERIC_SMP_IDLE_THREAD
+	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_UID16
 	select KTIME_SCALAR
-	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
+	select PERF_USE_VMALLOC
+	select RTC_LIB
+	select SYS_SUPPORTS_APM_EMULATION
+	select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
+	select MODULES_USE_ELF_REL
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -64,9 +70,9 @@
 	bool
 
 config ARM_DMA_USE_IOMMU
-	select NEED_SG_DMA_LENGTH
-	select ARM_HAS_SG_CHAIN
 	bool
+	select ARM_HAS_SG_CHAIN
+	select NEED_SG_DMA_LENGTH
 
 config HAVE_PWM
 	bool
@@ -202,6 +208,13 @@
 	  this feature (eg, building a kernel for a single machine) and
 	  you need to shrink the kernel to the minimal size.
 
+config NEED_MACH_GPIO_H
+	bool
+	help
+	  Select this when mach/gpio.h is required to provide special
+	  definitions for this platform. The need for mach/gpio.h should
+	  be avoided when possible.
+
 config NEED_MACH_IO_H
 	bool
 	help
@@ -247,190 +260,148 @@
 #
 choice
 	prompt "ARM system type"
-	default ARCH_VERSATILE
+	default ARCH_MULTIPLATFORM
 
-config ARCH_SOCFPGA
-	bool "Altera SOCFPGA family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_GIC
-	select CACHE_L2X0
-	select CLKDEV_LOOKUP
+config ARCH_MULTIPLATFORM
+	bool "Allow multiple platforms to be selected"
+	depends on MMU
+	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR
 	select COMMON_CLK
-	select CPU_V7
-	select DW_APB_TIMER
-	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select HAVE_ARM_SCU
+	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
-	help
-	  This enables support for Altera SOCFPGA Cyclone V platform
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
-	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
+	select ARM_AMBA
 	select COMMON_CLK
-	select CLK_VERSATILE
+	select COMMON_CLK_VERSATILE
+	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select ICST
-	select GENERIC_CLOCKEVENTS
+	select MULTI_IRQ_HANDLER
+	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
-	select MULTI_IRQ_HANDLER
 	help
 	  Support for ARM's Integrator platform.
 
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
-	select PLAT_VERSATILE_CLCD
+	select ARM_AMBA
 	select ARM_TIMER_SP804
+	select COMMON_CLK
+	select COMMON_CLK_VERSATILE
+	select GENERIC_CLOCKEVENTS
 	select GPIO_PL061 if GPIOLIB
+	select ICST
 	select NEED_MACH_MEMORY_H
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLCD
 	help
 	  This enables support for ARM Ltd RealView boards.
 
 config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_TIMER_SP804
 	select ARM_VIC
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
 	select HAVE_MACH_CLKDEV
 	select ICST
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select NEED_MACH_IO_H if PCI
 	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_FPGA_IRQ
-	select ARM_TIMER_SP804
 	help
 	  This enables support for ARM Ltd Versatile board.
 
-config ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	select HAVE_PATA_PLATFORM
-	select ICST
-	select NO_IOPORT
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLCD
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	help
-	  This enables support for the ARM Ltd Versatile Express boards.
-
 config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select IRQ_DOMAIN
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
 	help
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
 
-config ARCH_BCMRING
-	bool "Broadcom BCMRING"
-	depends on MMU
-	select CPU_V6
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	help
-	  Support for Broadcom's BCMRing platform.
-
-config ARCH_HIGHBANK
-	bool "Calxeda Highbank-based"
+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
-	select ARM_GIC
+	select ARM_ERRATA_411920
 	select ARM_TIMER_SP804
-	select CACHE_L2X0
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
-	select CPU_V7
+	select CPU_V6
 	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU
-	select HAVE_SMP
+	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
 	help
-	  Support for the Calxeda Highbank SoC based boards.
-
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select CPU_ARM720T
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Cirrus Logic 711x/721x/731x based boards.
+	  This enables support for the Broadcom BCM2835 SoC. This SoC is
+	  use in the Raspberry Pi, and Roku 2 devices.
 
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
+	select ARM_GIC
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
-	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
+config ARCH_CLPS711X
+	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+	select ARCH_USES_GETTIMEOFFSET
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_ARM720T
+	select NEED_MACH_MEMORY_H
+	help
+	  Support for Cirrus Logic 711x/721x/731x based boards.
+
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
-	select CPU_FA526
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
+	select CPU_FA526
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
-config ARCH_PRIMA2
-	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
-	select CPU_V7
-	select NO_IOPORT
+config ARCH_SIRF
+	bool "CSR SiRF"
 	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
 	select MIGHT_HAVE_CACHE_L2X0
+	select NO_IOPORT
 	select PINCTRL
 	select PINCTRL_SIRF
 	select USE_OF
-	select ZONE_DMA
 	help
-          Support for CSR SiRFSoC ARM Cortex A9 Platform
+	  Support for CSR SiRFprimaII/Marco/Polo platforms
 
 config ARCH_EBSA110
 	bool "EBSA-110"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_SA110
 	select ISA
-	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -439,13 +410,13 @@
 
 config ARCH_EP93XX
 	bool "EP93xx-based"
-	select CPU_ARM920T
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_USES_GETTIMEOFFSET
+	select CPU_ARM920T
 	select NEED_MACH_MEMORY_H
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
@@ -456,7 +427,7 @@
 	select FOOTBRIDGE
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
-	select NEED_MACH_IO_H
+	select NEED_MACH_IO_H if !MMU
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for systems based on the DC21285 companion chip
@@ -464,10 +435,10 @@
 
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
@@ -477,57 +448,58 @@
 
 config ARCH_MXS
 	bool "Freescale MXS-based"
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
+	select MULTI_IRQ_HANDLER
 	select PINCTRL
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
 
 config ARCH_NETX
 	bool "Hilscher NetX based"
+	select ARM_VIC
 	select CLKSRC_MMIO
 	select CPU_ARM926T
-	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
 config ARCH_H720X
 	bool "Hynix HMS720x-based"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_ARM720T
 	select ISA_DMA_API
-	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
-	select CPU_XSC3
-	select PLAT_IOP
-	select PCI
 	select ARCH_SUPPORTS_MSI
-	select VMSPLIT_1G
-	select NEED_MACH_IO_H
+	select CPU_XSC3
 	select NEED_MACH_MEMORY_H
 	select NEED_RET_TO_USER
+	select PCI
+	select PLAT_IOP
+	select VMSPLIT_1G
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
+	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
-	select NEED_MACH_IO_H
+	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
-	select PLAT_IOP
 	select PCI
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_IOP
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -535,12 +507,12 @@
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
+	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
-	select NEED_MACH_IO_H
+	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
-	select PLAT_IOP
 	select PCI
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_IOP
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -548,74 +520,46 @@
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_XSCALE
-	select ARCH_REQUIRE_GPIOLIB
+	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
-	select DMABOUNCE if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_MVEBU
-	bool "Marvell SOCs with Device Tree support"
-	select GENERIC_CLOCKEVENTS
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
-	select COMMON_CLK
-	help
-	  Support for the Marvell SoC Family with device tree support
-
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select CPU_V7
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select MIGHT_HAVE_PCI
+	select PLAT_ORION_LEGACY
+	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PCI
+	select PCI_QUIRKS
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_IDE
-	select ARM_AMBA
-	select USB_ARCH_HAS_OHCI
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select USE_OF
-	select HAVE_PWM
-	help
-	  Support for the NXP LPC32XX family of processors
-
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PCI
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -623,12 +567,11 @@
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PCI
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -639,20 +582,22 @@
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select IRQ_DOMAIN
+	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
-	select GENERIC_ALLOCATOR
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
+	select CLKSRC_MMIO
+	select CPU_ARM922T
+	select GENERIC_CLOCKEVENTS
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
@@ -660,10 +605,10 @@
 
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -674,74 +619,63 @@
 	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
 		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
+config ARCH_LPC32XX
+	bool "NXP LPC32XX"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select HAVE_IDE
+	select HAVE_PWM
+	select USB_ARCH_HAS_OHCI
+	select USE_OF
+	help
+	  Support for the NXP LPC32XX family of processors
+
 config ARCH_TEGRA
 	bool "NVIDIA Tegra"
+	select ARCH_HAS_CPUFREQ
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select NEED_MACH_IO_H if PCI
-	select ARCH_HAS_CPUFREQ
 	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
 
-config ARCH_PICOXCELL
-	bool "Picochip picoXcell"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select CPU_V6K
-	select DW_APB_TIMER
-	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select HAVE_TCM
-	select NO_IOPORT
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  This enables support for systems based on the Picochip picoXcell
-	  family of Femtocell devices.  The picoxcell support requires device tree
-	  for all boards.
-
-config ARCH_PNX4008
-	bool "Philips Nexperia PNX4008 Mobile"
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  This enables support for Philips PNX4008 mobile platform.
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
-	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MTD_XIP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_CPU_SUSPEND if PM
+	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select HAVE_IDE
+	select MULTI_IRQ_HANDLER
+	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
-	select AUTO_ZRELADDR
-	select MULTI_IRQ_HANDLER
-	select ARM_CPU_SUSPEND if PM
-	select HAVE_IDE
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
 config ARCH_MSM
 	bool "Qualcomm MSM"
-	select HAVE_CLK
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -751,50 +685,51 @@
 
 config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile / R-Mobile"
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
-	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
-	select NO_IOPORT
-	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
-	select PM_GENERIC_DOMAINS if PM
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
+	select PM_GENERIC_DOMAINS if PM
+	select SPARSE_IRQ
 	help
 	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
 
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
-	select FIQ
 	select ARCH_MAY_HAVE_PC_FDC
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select FIQ
 	select HAVE_IDE
+	select HAVE_PATA_PLATFORM
+	select ISA_DMA_API
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
 
 config ARCH_SA1100
 	bool "SA1100-based"
-	select CLKSRC_MMIO
-	select CPU_SA1100
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MTD_XIP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SPARSEMEM_ENABLE
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_FREQ
+	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
+	select ISA
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -802,14 +737,15 @@
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
+	select CLKDEV_LOOKUP
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
@@ -819,100 +755,104 @@
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
-	select PLAT_SAMSUNG
-	select CPU_V6
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	select ARM_VIC
+	select CLKDEV_LOOKUP
+	select CPU_V6
 	select HAVE_CLK
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
-	select CLKDEV_LOOKUP
+	select NEED_MACH_GPIO_H
 	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
-	select ARCH_HAS_CPUFREQ
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_SAMSUNG
+	select S3C_DEV_NAND
+	select S3C_GPIO_TRACK
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_GPIOLIB_4BIT
 	select SAMSUNG_IRQ_VIC_TIMER
-	select S3C_GPIO_TRACK
-	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
-	select SAMSUNG_GPIOLIB_4BIT
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
 
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
-	select CPU_V6
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select CPU_V6
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
 
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select ARCH_USES_GETTIMEOFFSET
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5PC100 series based systems
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARCH_HAS_CPUFREQ
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
 config ARCH_EXYNOS
-	bool "SAMSUNG EXYNOS"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
+	bool "Samsung EXYNOS"
+	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
-	select ARCH_HAS_CPUFREQ
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC if RTC_CLASS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
 config ARCH_SHARK
 	bool "Shark"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_SA110
 	select ISA
 	select ISA_DMA
-	select ZONE_DMA
-	select PCI
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
-	select NEED_MACH_IO_H
+	select PCI
+	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -920,29 +860,30 @@
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select HAVE_TCM
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select COMMON_CLK
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_TCM
+	select SPARSE_IRQ
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
 config ARCH_U8500
 	bool "ST-Ericsson U8500 Series"
 	depends on MMU
-	select CPU_V7
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_CPUFREQ
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -950,71 +891,78 @@
 
 config ARCH_NOMADIK
 	bool "STMicroelectronics Nomadik"
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select PINCTRL
 	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_REQUIRE_GPIOLIB
+	select PINCTRL
+	select PINCTRL_STN8815
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
+config PLAT_SPEAR
+	bool "ST SPEAr"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
-	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
-	select ZONE_DMA
-	select HAVE_IDE
 	select CLKDEV_LOOKUP
 	select GENERIC_ALLOCATOR
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select ARCH_HAS_HOLES_MEMORYMODEL
+	select HAVE_IDE
+	select NEED_MACH_GPIO_H
+	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.
 
 config ARCH_OMAP
 	bool "TI OMAP"
 	depends on MMU
-	select HAVE_CLK
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	help
-	  Support for TI's OMAP platform (OMAP1/2/3/4).
-
-config PLAT_SPEAR
-	bool "ST SPEAr"
-	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select COMMON_CLK
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
+	select NEED_MACH_GPIO_H
 	help
-	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
 config ARCH_VT8500
 	bool "VIA/WonderMedia 85xx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select USE_OF
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
 
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
+	select ARM_AMBA
+	select ARM_GIC
+	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARM_GIC
-	select ARM_AMBA
 	select ICST
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
@@ -1022,6 +970,50 @@
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
 endchoice
 
+menu "Multiple platform selection"
+	depends on ARCH_MULTIPLATFORM
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select ARCH_VEXPRESS
+	select CPU_V7
+
+config ARCH_MULTI_V6_V7
+	bool
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
@@ -1031,8 +1023,6 @@
 
 source "arch/arm/mach-at91/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
-
 source "arch/arm/mach-clps711x/Kconfig"
 
 source "arch/arm/mach-cns3xxx/Kconfig"
@@ -1049,6 +1039,8 @@
 
 source "arch/arm/mach-h720x/Kconfig"
 
+source "arch/arm/mach-highbank/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -1084,6 +1076,8 @@
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-picoxcell/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 source "arch/arm/plat-pxa/Kconfig"
 
@@ -1096,6 +1090,8 @@
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 
+source "arch/arm/mach-socfpga/Kconfig"
+
 source "arch/arm/plat-spear/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
@@ -1118,6 +1114,8 @@
 
 source "arch/arm/mach-shmobile/Kconfig"
 
+source "arch/arm/mach-prima2/Kconfig"
+
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
@@ -1129,8 +1127,6 @@
 source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/plat-versatile/Kconfig"
 
-source "arch/arm/mach-vt8500/Kconfig"
-
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -1144,9 +1140,13 @@
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
-	select COMMON_CLK
+
+config PLAT_ORION_LEGACY
+	bool
+	select PLAT_ORION
 
 config PLAT_PXA
 	bool
@@ -1179,12 +1179,6 @@
 	depends on CPU_XSCALE
 	default y
 
-config CPU_HAS_PMU
-	depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
-		   (!ARCH_OMAP3 || OMAP3_EMU)
-	default y
-	bool
-
 config MULTI_IRQ_HANDLER
 	bool
 	help
@@ -1413,6 +1407,16 @@
 	  on systems with an outer cache, the store buffer is drained
 	  explicitly.
 
+config ARM_ERRATA_775420
+       bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+       depends on CPU_V7
+       help
+	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 operation aborts with MMU exception, it might cause the processor
+	 to deadlock. This workaround puts DSB before executing ISB if
+	 an abort may occur on cache maintenance.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1496,8 +1500,8 @@
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU
-	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1600,8 +1604,8 @@
 	default "4"
 
 config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && HOTPLUG
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1623,6 +1627,7 @@
 	default 355 if ARCH_U8500
 	default 264 if MACH_H4700
 	default 512 if SOC_OMAP5
+	default 288 if ARCH_VT8500
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
@@ -1641,8 +1646,8 @@
 	default 100
 
 config THUMB2_KERNEL
-	bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
-	depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && !CPU_V6 && !CPU_V6K
 	select AEABI
 	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
@@ -1757,7 +1762,7 @@
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && CPU_HAS_PMU
+	depends on PERF_EVENTS
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -1768,6 +1773,7 @@
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order" if ARCH_SHMOBILE
 	range 11 64 if ARCH_SHMOBILE
+	default "12" if SOC_AM33XX
 	default "9" if SA1111
 	default "11"
 	help
@@ -1781,59 +1787,6 @@
 	  This config option is actually maximum order plus one. For example,
 	  a value of 11 means that the largest free memory block is 2^10 pages.
 
-config LEDS
-	bool "Timer and CPU usage LEDs"
-	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
-		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
-		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
-	help
-	  If you say Y here, the LEDs on your machine will be used
-	  to provide useful information about your current system status.
-
-	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
-	  be able to select which LEDs are active using the options below. If
-	  you are compiling a kernel for the EBSA-110 or the LART however, the
-	  red LED will simply flash regularly to indicate that the system is
-	  still functional. It is safe to say Y here if you have a CATS
-	  system, but the driver will do nothing.
-
-config LEDS_TIMER
-	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-			    OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			    || MACH_OMAP_PERSEUS2
-	depends on LEDS
-	depends on !GENERIC_CLOCKEVENTS
-	default y if ARCH_EBSA110
-	help
-	  If you say Y here, one of the system LEDs (the green one on the
-	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
-	  will flash regularly to indicate that the system is still
-	  operational. This is mainly useful to kernel hackers who are
-	  debugging unstable kernels.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
-config LEDS_CPU
-	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-			!ARCH_OMAP) \
-			|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			|| MACH_OMAP_PERSEUS2
-	depends on LEDS
-	help
-	  If you say Y here, the red LED will be used to give a good real
-	  time indication of CPU usage, by lighting whenever the idle task
-	  is not currently executing.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
 config ALIGNMENT_TRAP
 	bool
 	depends on CPU_CP15_MMU
@@ -1849,8 +1802,8 @@
 	  configuration it is safe to say N, otherwise say Y.
 
 config UACCESS_WITH_MEMCPY
-	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
-	depends on MMU && EXPERIMENTAL
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
+	depends on MMU
 	default y if CPU_FEROCEON
 	help
 	  Implement faster copy_to_user and clear_user methods for CPU
@@ -1891,11 +1844,16 @@
 	  neutralized via a kernel panic.
 	  This feature requires gcc version 4.2 or above.
 
-config DEPRECATED_PARAM_STRUCT
-	bool "Provide old way to pass kernel parameters"
+config XEN_DOM0
+	def_bool y
+	depends on XEN
+
+config XEN
+	bool "Xen guest support on ARM (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ARM && OF
+	depends on CPU_V7 && !CPU_V6
 	help
-	  This was deprecated in 2001 and announced to live on for 5 years.
-	  Some old boot loaders still use this way.
+	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
 endmenu
 
@@ -1903,12 +1861,29 @@
 
 config USE_OF
 	bool "Flattened Device Tree support"
+	select IRQ_DOMAIN
 	select OF
 	select OF_EARLY_FLATTREE
-	select IRQ_DOMAIN
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ATAGS
+	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	default y
+	help
+	  This is the traditional way of passing data to the kernel at boot
+	  time. If you are solely relying on the flattened device tree (or
+	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
+	  to remove ATAGS support from your kernel binary.  If unsure,
+	  leave this to y.
+
+config DEPRECATED_PARAM_STRUCT
+	bool "Provide old way to pass kernel parameters"
+	depends on ATAGS
+	help
+	  This was deprecated in 2001 and announced to live on for 5 years.
+	  Some old boot loaders still use this way.
+
 # Compressed boot loader in ROM.  Yes, we really want to ask about
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
@@ -2035,6 +2010,7 @@
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
+	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -2060,7 +2036,7 @@
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM && !ARM_LPAE
+	depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2104,7 +2080,7 @@
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
-	depends on KEXEC
+	depends on ATAGS && KEXEC
 	default y
 	help
 	  Should the atags used to boot the kernel be exported in an "atags"
@@ -2169,8 +2145,8 @@
 	bool
 	depends on CPU_FREQ && ARCH_PXA && PXA25x
 	default y
-	select CPU_FREQ_TABLE
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
+	select CPU_FREQ_TABLE
 
 config CPU_FREQ_S3C
 	bool
@@ -2313,7 +2289,7 @@
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5PC100 && !ARCH_TEGRA
+	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
 	def_bool y
diff -druN linux-libre-3.6-gnu/arch/arm/Kconfig.debug linux-libre-3.7-gnu/arch/arm/Kconfig.debug
--- linux-libre-3.6-gnu/arch/arm/Kconfig.debug	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/Kconfig.debug	2012-12-10 22:30:57.000000000 -0500
@@ -224,6 +224,20 @@
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q UART4.
 
+	config DEBUG_MMP_UART2
+		bool "Kernel low-level debugging message via MMP UART2"
+		depends on ARCH_MMP
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MMP UART2.
+
+	config DEBUG_MMP_UART3
+		bool "Kernel low-level debugging message via MMP UART3"
+		depends on ARCH_MMP
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MMP UART3.
+
 	config DEBUG_MSM_UART1
 		bool "Kernel low-level debugging messages via MSM UART1"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
@@ -261,6 +275,20 @@
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8960 devices.
 
+	config DEBUG_MVEBU_UART
+		bool "Kernel low-level debugging messages via MVEBU UART"
+		depends on ARCH_MVEBU
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MVEBU based platforms.
+
+	config DEBUG_PICOXCELL_UART
+		depends on ARCH_PICOXCELL
+		bool "Use PicoXcell UART for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on PicoXcell based platforms.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -310,6 +338,13 @@
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+	config DEBUG_SOCFPGA_UART
+		depends on ARCH_SOCFPGA
+		bool "Use SOCFPGA UART for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA based platforms.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -338,6 +373,7 @@
 
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
+		depends on !ARCH_MULTIPLATFORM
 		help
 		  Say Y here if your platform doesn't provide a UART option
 		  below. This relies on your platform choosing the right UART
@@ -373,6 +409,17 @@
 
 endchoice
 
+config DEBUG_LL_INCLUDE
+	string
+	default "debug/icedcc.S" if DEBUG_ICEDCC
+	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
+		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+	default "mach/debug-macro.S"
+
 config EARLY_PRINTK
 	bool "Early printk"
 	depends on DEBUG_LL
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/arch_timer.c linux-libre-3.7-gnu/arch/arm/kernel/arch_timer.c
--- linux-libre-3.6-gnu/arch/arm/kernel/arch_timer.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/arch_timer.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,18 +21,28 @@
 #include <linux/io.h>
 
 #include <asm/cputype.h>
+#include <asm/delay.h>
 #include <asm/localtimer.h>
 #include <asm/arch_timer.h>
 #include <asm/system_info.h>
 #include <asm/sched_clock.h>
 
 static unsigned long arch_timer_rate;
-static int arch_timer_ppi;
-static int arch_timer_ppi2;
+
+enum ppi_nr {
+	PHYS_SECURE_PPI,
+	PHYS_NONSECURE_PPI,
+	VIRT_PPI,
+	HYP_PPI,
+	MAX_TIMER_PPI
+};
+
+static int arch_timer_ppi[MAX_TIMER_PPI];
 
 static struct clock_event_device __percpu **arch_timer_evt;
+static struct delay_timer arch_delay_timer;
 
-extern void init_current_timer_delay(unsigned long freq);
+static bool arch_timer_use_virtual = true;
 
 /*
  * Architected system timer support.
@@ -46,50 +56,104 @@
 #define ARCH_TIMER_REG_FREQ		1
 #define ARCH_TIMER_REG_TVAL		2
 
-static void arch_timer_reg_write(int reg, u32 val)
+#define ARCH_TIMER_PHYS_ACCESS		0
+#define ARCH_TIMER_VIRT_ACCESS		1
+
+/*
+ * These register accessors are marked inline so the compiler can
+ * nicely work out which register we want, and chuck away the rest of
+ * the code. At least it does so with a recent GCC (4.6.3).
+ */
+static inline void arch_timer_reg_write(const int access, const int reg, u32 val)
 {
-	switch (reg) {
-	case ARCH_TIMER_REG_CTRL:
-		asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
-		break;
-	case ARCH_TIMER_REG_TVAL:
-		asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
-		break;
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
+			break;
+		}
+	}
+
+	if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val));
+			break;
+		}
 	}
 
 	isb();
 }
 
-static u32 arch_timer_reg_read(int reg)
+static inline u32 arch_timer_reg_read(const int access, const int reg)
 {
-	u32 val;
+	u32 val = 0;
 
-	switch (reg) {
-	case ARCH_TIMER_REG_CTRL:
-		asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
-		break;
-	case ARCH_TIMER_REG_FREQ:
-		asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val));
-		break;
-	case ARCH_TIMER_REG_TVAL:
-		asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
-		break;
-	default:
-		BUG();
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_FREQ:
+			asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val));
+			break;
+		}
+	}
+
+	if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val));
+			break;
+		}
 	}
 
 	return val;
 }
 
-static irqreturn_t arch_timer_handler(int irq, void *dev_id)
+static inline cycle_t arch_timer_counter_read(const int access)
 {
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
-	unsigned long ctrl;
+	cycle_t cval = 0;
 
-	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	if (access == ARCH_TIMER_PHYS_ACCESS)
+		asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval));
+
+	if (access == ARCH_TIMER_VIRT_ACCESS)
+		asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval));
+
+	return cval;
+}
+
+static inline cycle_t arch_counter_get_cntpct(void)
+{
+	return arch_timer_counter_read(ARCH_TIMER_PHYS_ACCESS);
+}
+
+static inline cycle_t arch_counter_get_cntvct(void)
+{
+	return arch_timer_counter_read(ARCH_TIMER_VIRT_ACCESS);
+}
+
+static irqreturn_t inline timer_handler(const int access,
+					struct clock_event_device *evt)
+{
+	unsigned long ctrl;
+	ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
 	if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
 		ctrl |= ARCH_TIMER_CTRL_IT_MASK;
-		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+		arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
 		evt->event_handler(evt);
 		return IRQ_HANDLED;
 	}
@@ -97,63 +161,100 @@
 	return IRQ_NONE;
 }
 
-static void arch_timer_disable(void)
+static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id)
 {
-	unsigned long ctrl;
+	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
 
-	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
-	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
-	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+	return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt);
 }
 
-static void arch_timer_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk)
+static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+	return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt);
+}
+
+static inline void timer_set_mode(const int access, int mode)
 {
+	unsigned long ctrl;
 	switch (mode) {
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		arch_timer_disable();
+		ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+		ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+		arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
 		break;
 	default:
 		break;
 	}
 }
 
-static int arch_timer_set_next_event(unsigned long evt,
-				     struct clock_event_device *unused)
+static void arch_timer_set_mode_virt(enum clock_event_mode mode,
+				     struct clock_event_device *clk)
 {
-	unsigned long ctrl;
+	timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode);
+}
 
-	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+static void arch_timer_set_mode_phys(enum clock_event_mode mode,
+				     struct clock_event_device *clk)
+{
+	timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode);
+}
+
+static inline void set_next_event(const int access, unsigned long evt)
+{
+	unsigned long ctrl;
+	ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
 	ctrl |= ARCH_TIMER_CTRL_ENABLE;
 	ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+	arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt);
+	arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+}
 
-	arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt);
-	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+static int arch_timer_set_next_event_virt(unsigned long evt,
+					  struct clock_event_device *unused)
+{
+	set_next_event(ARCH_TIMER_VIRT_ACCESS, evt);
+	return 0;
+}
 
+static int arch_timer_set_next_event_phys(unsigned long evt,
+					  struct clock_event_device *unused)
+{
+	set_next_event(ARCH_TIMER_PHYS_ACCESS, evt);
 	return 0;
 }
 
 static int __cpuinit arch_timer_setup(struct clock_event_device *clk)
 {
-	/* Be safe... */
-	arch_timer_disable();
-
 	clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
 	clk->name = "arch_sys_timer";
 	clk->rating = 450;
-	clk->set_mode = arch_timer_set_mode;
-	clk->set_next_event = arch_timer_set_next_event;
-	clk->irq = arch_timer_ppi;
+	if (arch_timer_use_virtual) {
+		clk->irq = arch_timer_ppi[VIRT_PPI];
+		clk->set_mode = arch_timer_set_mode_virt;
+		clk->set_next_event = arch_timer_set_next_event_virt;
+	} else {
+		clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
+		clk->set_mode = arch_timer_set_mode_phys;
+		clk->set_next_event = arch_timer_set_next_event_phys;
+	}
+
+	clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL);
 
 	clockevents_config_and_register(clk, arch_timer_rate,
 					0xf, 0x7fffffff);
 
 	*__this_cpu_ptr(arch_timer_evt) = clk;
 
-	enable_percpu_irq(clk->irq, 0);
-	if (arch_timer_ppi2)
-		enable_percpu_irq(arch_timer_ppi2, 0);
+	if (arch_timer_use_virtual)
+		enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0);
+	else {
+		enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0);
+		if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+			enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0);
+	}
 
 	return 0;
 }
@@ -173,8 +274,8 @@
 		return -ENXIO;
 
 	if (arch_timer_rate == 0) {
-		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0);
-		freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ);
+		freq = arch_timer_reg_read(ARCH_TIMER_PHYS_ACCESS,
+					   ARCH_TIMER_REG_FREQ);
 
 		/* Check the timer frequency. */
 		if (freq == 0) {
@@ -185,52 +286,57 @@
 		arch_timer_rate = freq;
 	}
 
-	pr_info_once("Architected local timer running at %lu.%02luMHz.\n",
-		     arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100);
+	pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n",
+		     arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100,
+		     arch_timer_use_virtual ? "virt" : "phys");
 	return 0;
 }
 
-static inline cycle_t arch_counter_get_cntpct(void)
-{
-	u32 cvall, cvalh;
-
-	asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
-
-	return ((cycle_t) cvalh << 32) | cvall;
-}
-
-static inline cycle_t arch_counter_get_cntvct(void)
+static u32 notrace arch_counter_get_cntpct32(void)
 {
-	u32 cvall, cvalh;
-
-	asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
+	cycle_t cnt = arch_counter_get_cntpct();
 
-	return ((cycle_t) cvalh << 32) | cvall;
+	/*
+	 * The sched_clock infrastructure only knows about counters
+	 * with at most 32bits. Forget about the upper 24 bits for the
+	 * time being...
+	 */
+	return (u32)cnt;
 }
 
 static u32 notrace arch_counter_get_cntvct32(void)
 {
-	cycle_t cntvct = arch_counter_get_cntvct();
+	cycle_t cnt = arch_counter_get_cntvct();
 
 	/*
 	 * The sched_clock infrastructure only knows about counters
 	 * with at most 32bits. Forget about the upper 24 bits for the
 	 * time being...
 	 */
-	return (u32)(cntvct & (u32)~0);
+	return (u32)cnt;
 }
 
 static cycle_t arch_counter_read(struct clocksource *cs)
 {
+	/*
+	 * Always use the physical counter for the clocksource.
+	 * CNTHCTL.PL1PCTEN must be set to 1.
+	 */
 	return arch_counter_get_cntpct();
 }
 
-int read_current_timer(unsigned long *timer_val)
+static unsigned long arch_timer_read_current_timer(void)
 {
-	if (!arch_timer_rate)
-		return -ENXIO;
-	*timer_val = arch_counter_get_cntpct();
-	return 0;
+	return arch_counter_get_cntpct();
+}
+
+static cycle_t arch_counter_read_cc(const struct cyclecounter *cc)
+{
+	/*
+	 * Always use the physical counter for the clocksource.
+	 * CNTHCTL.PL1PCTEN must be set to 1.
+	 */
+	return arch_counter_get_cntpct();
 }
 
 static struct clocksource clocksource_counter = {
@@ -241,14 +347,32 @@
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static struct cyclecounter cyclecounter = {
+	.read	= arch_counter_read_cc,
+	.mask	= CLOCKSOURCE_MASK(56),
+};
+
+static struct timecounter timecounter;
+
+struct timecounter *arch_timer_get_timecounter(void)
+{
+	return &timecounter;
+}
+
 static void __cpuinit arch_timer_stop(struct clock_event_device *clk)
 {
 	pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
 		 clk->irq, smp_processor_id());
-	disable_percpu_irq(clk->irq);
-	if (arch_timer_ppi2)
-		disable_percpu_irq(arch_timer_ppi2);
-	arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+
+	if (arch_timer_use_virtual)
+		disable_percpu_irq(arch_timer_ppi[VIRT_PPI]);
+	else {
+		disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]);
+		if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+			disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
+	}
+
+	clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk);
 }
 
 static struct local_timer_ops arch_timer_ops __cpuinitdata = {
@@ -261,36 +385,48 @@
 static int __init arch_timer_register(void)
 {
 	int err;
+	int ppi;
 
 	err = arch_timer_available();
 	if (err)
-		return err;
+		goto out;
 
 	arch_timer_evt = alloc_percpu(struct clock_event_device *);
-	if (!arch_timer_evt)
-		return -ENOMEM;
+	if (!arch_timer_evt) {
+		err = -ENOMEM;
+		goto out;
+	}
 
 	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+	cyclecounter.mult = clocksource_counter.mult;
+	cyclecounter.shift = clocksource_counter.shift;
+	timecounter_init(&timecounter, &cyclecounter,
+			 arch_counter_get_cntpct());
+
+	if (arch_timer_use_virtual) {
+		ppi = arch_timer_ppi[VIRT_PPI];
+		err = request_percpu_irq(ppi, arch_timer_handler_virt,
+					 "arch_timer", arch_timer_evt);
+	} else {
+		ppi = arch_timer_ppi[PHYS_SECURE_PPI];
+		err = request_percpu_irq(ppi, arch_timer_handler_phys,
+					 "arch_timer", arch_timer_evt);
+		if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) {
+			ppi = arch_timer_ppi[PHYS_NONSECURE_PPI];
+			err = request_percpu_irq(ppi, arch_timer_handler_phys,
+						 "arch_timer", arch_timer_evt);
+			if (err)
+				free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+						arch_timer_evt);
+		}
+	}
 
-	err = request_percpu_irq(arch_timer_ppi, arch_timer_handler,
-				 "arch_timer", arch_timer_evt);
 	if (err) {
 		pr_err("arch_timer: can't register interrupt %d (%d)\n",
-		       arch_timer_ppi, err);
+		       ppi, err);
 		goto out_free;
 	}
 
-	if (arch_timer_ppi2) {
-		err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler,
-					 "arch_timer", arch_timer_evt);
-		if (err) {
-			pr_err("arch_timer: can't register interrupt %d (%d)\n",
-			       arch_timer_ppi2, err);
-			arch_timer_ppi2 = 0;
-			goto out_free_irq;
-		}
-	}
-
 	err = local_timer_register(&arch_timer_ops);
 	if (err) {
 		/*
@@ -302,21 +438,29 @@
 		arch_timer_global_evt.cpumask = cpumask_of(0);
 		err = arch_timer_setup(&arch_timer_global_evt);
 	}
-
 	if (err)
 		goto out_free_irq;
 
-	init_current_timer_delay(arch_timer_rate);
+	/* Use the architected timer for the delay loop. */
+	arch_delay_timer.read_current_timer = &arch_timer_read_current_timer;
+	arch_delay_timer.freq = arch_timer_rate;
+	register_current_timer_delay(&arch_delay_timer);
 	return 0;
 
 out_free_irq:
-	free_percpu_irq(arch_timer_ppi, arch_timer_evt);
-	if (arch_timer_ppi2)
-		free_percpu_irq(arch_timer_ppi2, arch_timer_evt);
+	if (arch_timer_use_virtual)
+		free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt);
+	else {
+		free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+				arch_timer_evt);
+		if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+			free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
+					arch_timer_evt);
+	}
 
 out_free:
 	free_percpu(arch_timer_evt);
-
+out:
 	return err;
 }
 
@@ -329,6 +473,7 @@
 {
 	struct device_node *np;
 	u32 freq;
+	int i;
 
 	np = of_find_matching_node(NULL, arch_timer_of_match);
 	if (!np) {
@@ -340,22 +485,40 @@
 	if (!of_property_read_u32(np, "clock-frequency", &freq))
 		arch_timer_rate = freq;
 
-	arch_timer_ppi = irq_of_parse_and_map(np, 0);
-	arch_timer_ppi2 = irq_of_parse_and_map(np, 1);
-	pr_info("arch_timer: found %s irqs %d %d\n",
-		np->name, arch_timer_ppi, arch_timer_ppi2);
+	for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+		arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+
+	/*
+	 * If no interrupt provided for virtual timer, we'll have to
+	 * stick to the physical timer. It'd better be accessible...
+	 */
+	if (!arch_timer_ppi[VIRT_PPI]) {
+		arch_timer_use_virtual = false;
+
+		if (!arch_timer_ppi[PHYS_SECURE_PPI] ||
+		    !arch_timer_ppi[PHYS_NONSECURE_PPI]) {
+			pr_warn("arch_timer: No interrupt available, giving up\n");
+			return -EINVAL;
+		}
+	}
 
 	return arch_timer_register();
 }
 
 int __init arch_timer_sched_clock_init(void)
 {
+	u32 (*cnt32)(void);
 	int err;
 
 	err = arch_timer_available();
 	if (err)
 		return err;
 
-	setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate);
+	if (arch_timer_use_virtual)
+		cnt32 = arch_counter_get_cntvct32;
+	else
+		cnt32 = arch_counter_get_cntpct32;
+
+	setup_sched_clock(cnt32, 32, arch_timer_rate);
 	return 0;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/asm-offsets.c linux-libre-3.7-gnu/arch/arm/kernel/asm-offsets.c
--- linux-libre-3.6-gnu/arch/arm/kernel/asm-offsets.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/asm-offsets.c	2012-12-10 22:30:57.000000000 -0500
@@ -59,10 +59,12 @@
   DEFINE(TI_USED_CP,		offsetof(struct thread_info, used_cp));
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
+#ifdef CONFIG_VFP
   DEFINE(TI_VFPSTATE,		offsetof(struct thread_info, vfpstate));
 #ifdef CONFIG_SMP
   DEFINE(VFP_CPU,		offsetof(union vfp_state, hard.cpu));
 #endif
+#endif
 #ifdef CONFIG_ARM_THUMBEE
   DEFINE(TI_THUMBEE_STATE,	offsetof(struct thread_info, thumbee_state));
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/atags.c linux-libre-3.7-gnu/arch/arm/kernel/atags.c
--- linux-libre-3.6-gnu/arch/arm/kernel/atags.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/atags.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,83 +0,0 @@
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/page.h>
-
-struct buffer {
-	size_t size;
-	char data[];
-};
-
-static int
-read_buffer(char* page, char** start, off_t off, int count,
-	int* eof, void* data)
-{
-	struct buffer *buffer = (struct buffer *)data;
-
-	if (off >= buffer->size) {
-		*eof = 1;
-		return 0;
-	}
-
-	count = min((int) (buffer->size - off), count);
-
-	memcpy(page, &buffer->data[off], count);
-
-	return count;
-}
-
-#define BOOT_PARAMS_SIZE 1536
-static char __initdata atags_copy[BOOT_PARAMS_SIZE];
-
-void __init save_atags(const struct tag *tags)
-{
-	memcpy(atags_copy, tags, sizeof(atags_copy));
-}
-
-static int __init init_atags_procfs(void)
-{
-	/*
-	 * This cannot go into save_atags() because kmalloc and proc don't work
-	 * yet when it is called.
-	 */
-	struct proc_dir_entry *tags_entry;
-	struct tag *tag = (struct tag *)atags_copy;
-	struct buffer *b;
-	size_t size;
-
-	if (tag->hdr.tag != ATAG_CORE) {
-		printk(KERN_INFO "No ATAGs?");
-		return -EINVAL;
-	}
-
-	for (; tag->hdr.size; tag = tag_next(tag))
-		;
-
-	/* include the terminating ATAG_NONE */
-	size = (char *)tag - atags_copy + sizeof(struct tag_header);
-
-	WARN_ON(tag->hdr.tag != ATAG_NONE);
-
-	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
-	if (!b)
-		goto nomem;
-
-	b->size = size;
-	memcpy(b->data, atags_copy, size);
-
-	tags_entry = create_proc_read_entry("atags", 0400,
-			NULL, read_buffer, b);
-
-	if (!tags_entry)
-		goto nomem;
-
-	return 0;
-
-nomem:
-	kfree(b);
-	printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
-
-	return -ENOMEM;
-}
-arch_initcall(init_atags_procfs);
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/atags_compat.c linux-libre-3.7-gnu/arch/arm/kernel/atags_compat.c
--- linux-libre-3.6-gnu/arch/arm/kernel/atags_compat.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/kernel/atags_compat.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,219 @@
+/*
+ *  linux/arch/arm/kernel/atags_compat.c
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * We keep the old params compatibility cruft in one place (here)
+ * so we don't end up with lots of mess around other places.
+ *
+ * NOTE:
+ *  The old struct param_struct is deprecated, but it will be kept in
+ *  the kernel for 5 years from now (2001). This will allow boot loaders
+ *  to convert to the new struct tag way.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+
+#include <asm/mach/arch.h>
+
+#include "atags.h"
+
+/*
+ * Usage:
+ *  - do not go blindly adding fields, add them at the end
+ *  - when adding fields, don't rely on the address until
+ *    a patch from me has been released
+ *  - unused fields should be zero (for future expansion)
+ *  - this structure is relatively short-lived - only
+ *    guaranteed to contain useful data in setup_arch()
+ *
+ * This is the old deprecated way to pass parameters to the kernel
+ */
+struct param_struct {
+    union {
+	struct {
+	    unsigned long page_size;		/*  0 */
+	    unsigned long nr_pages;		/*  4 */
+	    unsigned long ramdisk_size;		/*  8 */
+	    unsigned long flags;		/* 12 */
+#define FLAG_READONLY	1
+#define FLAG_RDLOAD	4
+#define FLAG_RDPROMPT	8
+	    unsigned long rootdev;		/* 16 */
+	    unsigned long video_num_cols;	/* 20 */
+	    unsigned long video_num_rows;	/* 24 */
+	    unsigned long video_x;		/* 28 */
+	    unsigned long video_y;		/* 32 */
+	    unsigned long memc_control_reg;	/* 36 */
+	    unsigned char sounddefault;		/* 40 */
+	    unsigned char adfsdrives;		/* 41 */
+	    unsigned char bytes_per_char_h;	/* 42 */
+	    unsigned char bytes_per_char_v;	/* 43 */
+	    unsigned long pages_in_bank[4];	/* 44 */
+	    unsigned long pages_in_vram;	/* 60 */
+	    unsigned long initrd_start;		/* 64 */
+	    unsigned long initrd_size;		/* 68 */
+	    unsigned long rd_start;		/* 72 */
+	    unsigned long system_rev;		/* 76 */
+	    unsigned long system_serial_low;	/* 80 */
+	    unsigned long system_serial_high;	/* 84 */
+	    unsigned long mem_fclk_21285;       /* 88 */
+	} s;
+	char unused[256];
+    } u1;
+    union {
+	char paths[8][128];
+	struct {
+	    unsigned long magic;
+	    char n[1024 - sizeof(unsigned long)];
+	} s;
+    } u2;
+    char commandline[COMMAND_LINE_SIZE];
+};
+
+static struct tag * __init memtag(struct tag *tag, unsigned long start, unsigned long size)
+{
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_MEM;
+	tag->hdr.size = tag_size(tag_mem32);
+	tag->u.mem.size = size;
+	tag->u.mem.start = start;
+
+	return tag;
+}
+
+static void __init build_tag_list(struct param_struct *params, void *taglist)
+{
+	struct tag *tag = taglist;
+
+	if (params->u1.s.page_size != PAGE_SIZE) {
+		printk(KERN_WARNING "Warning: bad configuration page, "
+		       "trying to continue\n");
+		return;
+	}
+
+	printk(KERN_DEBUG "Converting old-style param struct to taglist\n");
+
+#ifdef CONFIG_ARCH_NETWINDER
+	if (params->u1.s.nr_pages != 0x02000 &&
+	    params->u1.s.nr_pages != 0x04000 &&
+	    params->u1.s.nr_pages != 0x08000 &&
+	    params->u1.s.nr_pages != 0x10000) {
+		printk(KERN_WARNING "Warning: bad NeTTrom parameters "
+		       "detected, using defaults\n");
+
+		params->u1.s.nr_pages = 0x1000;	/* 16MB */
+		params->u1.s.ramdisk_size = 0;
+		params->u1.s.flags = FLAG_READONLY;
+		params->u1.s.initrd_start = 0;
+		params->u1.s.initrd_size = 0;
+		params->u1.s.rd_start = 0;
+	}
+#endif
+
+	tag->hdr.tag  = ATAG_CORE;
+	tag->hdr.size = tag_size(tag_core);
+	tag->u.core.flags = params->u1.s.flags & FLAG_READONLY;
+	tag->u.core.pagesize = params->u1.s.page_size;
+	tag->u.core.rootdev = params->u1.s.rootdev;
+
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_RAMDISK;
+	tag->hdr.size = tag_size(tag_ramdisk);
+	tag->u.ramdisk.flags = (params->u1.s.flags & FLAG_RDLOAD ? 1 : 0) |
+			       (params->u1.s.flags & FLAG_RDPROMPT ? 2 : 0);
+	tag->u.ramdisk.size  = params->u1.s.ramdisk_size;
+	tag->u.ramdisk.start = params->u1.s.rd_start;
+
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_INITRD;
+	tag->hdr.size = tag_size(tag_initrd);
+	tag->u.initrd.start = params->u1.s.initrd_start;
+	tag->u.initrd.size  = params->u1.s.initrd_size;
+
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_SERIAL;
+	tag->hdr.size = tag_size(tag_serialnr);
+	tag->u.serialnr.low = params->u1.s.system_serial_low;
+	tag->u.serialnr.high = params->u1.s.system_serial_high;
+
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_REVISION;
+	tag->hdr.size = tag_size(tag_revision);
+	tag->u.revision.rev = params->u1.s.system_rev;
+
+#ifdef CONFIG_ARCH_ACORN
+	if (machine_is_riscpc()) {
+		int i;
+		for (i = 0; i < 4; i++)
+			tag = memtag(tag, PHYS_OFFSET + (i << 26),
+				 params->u1.s.pages_in_bank[i] * PAGE_SIZE);
+	} else
+#endif
+	tag = memtag(tag, PHYS_OFFSET, params->u1.s.nr_pages * PAGE_SIZE);
+
+#ifdef CONFIG_FOOTBRIDGE
+	if (params->u1.s.mem_fclk_21285) {
+		tag = tag_next(tag);
+		tag->hdr.tag = ATAG_MEMCLK;
+		tag->hdr.size = tag_size(tag_memclk);
+		tag->u.memclk.fmemclk = params->u1.s.mem_fclk_21285;
+	}
+#endif
+
+#ifdef CONFIG_ARCH_EBSA285
+	if (machine_is_ebsa285()) {
+		tag = tag_next(tag);
+		tag->hdr.tag = ATAG_VIDEOTEXT;
+		tag->hdr.size = tag_size(tag_videotext);
+		tag->u.videotext.x            = params->u1.s.video_x;
+		tag->u.videotext.y            = params->u1.s.video_y;
+		tag->u.videotext.video_page   = 0;
+		tag->u.videotext.video_mode   = 0;
+		tag->u.videotext.video_cols   = params->u1.s.video_num_cols;
+		tag->u.videotext.video_ega_bx = 0;
+		tag->u.videotext.video_lines  = params->u1.s.video_num_rows;
+		tag->u.videotext.video_isvga  = 1;
+		tag->u.videotext.video_points = 8;
+	}
+#endif
+
+#ifdef CONFIG_ARCH_ACORN
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_ACORN;
+	tag->hdr.size = tag_size(tag_acorn);
+	tag->u.acorn.memc_control_reg = params->u1.s.memc_control_reg;
+	tag->u.acorn.vram_pages       = params->u1.s.pages_in_vram;
+	tag->u.acorn.sounddefault     = params->u1.s.sounddefault;
+	tag->u.acorn.adfsdrives       = params->u1.s.adfsdrives;
+#endif
+
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_CMDLINE;
+	tag->hdr.size = (strlen(params->commandline) + 3 +
+			 sizeof(struct tag_header)) >> 2;
+	strcpy(tag->u.cmdline.cmdline, params->commandline);
+
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_NONE;
+	tag->hdr.size = 0;
+
+	memmove(params, taglist, ((int)tag) - ((int)taglist) +
+				 sizeof(struct tag_header));
+}
+
+void __init convert_to_tag_list(struct tag *tags)
+{
+	struct param_struct *params = (struct param_struct *)tags;
+	build_tag_list(params, &params->u2);
+}
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/atags.h linux-libre-3.7-gnu/arch/arm/kernel/atags.h
--- linux-libre-3.6-gnu/arch/arm/kernel/atags.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/atags.h	2012-12-10 22:30:57.000000000 -0500
@@ -3,3 +3,17 @@
 #else
 static inline void save_atags(struct tag *tags) { }
 #endif
+
+void convert_to_tag_list(struct tag *tags);
+
+#ifdef CONFIG_ATAGS
+struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr);
+#else
+static inline struct machine_desc *
+setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+{
+	early_print("no ATAGS support: can't continue\n");
+	while (true);
+	unreachable();
+}
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/atags_parse.c linux-libre-3.7-gnu/arch/arm/kernel/atags_parse.c
--- linux-libre-3.6-gnu/arch/arm/kernel/atags_parse.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/kernel/atags_parse.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,238 @@
+/*
+ * Tag parsing.
+ *
+ * Copyright (C) 1995-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This is the traditional way of passing data to the kernel at boot time.  Rather
+ * than passing a fixed inflexible structure to the kernel, we pass a list
+ * of variable-sized tags to the kernel.  The first tag must be a ATAG_CORE
+ * tag for the list to be recognised (to distinguish the tagged list from
+ * a param_struct).  The list is terminated with a zero-length tag (this tag
+ * is not parsed in any way).
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/root_dev.h>
+#include <linux/screen_info.h>
+
+#include <asm/setup.h>
+#include <asm/system_info.h>
+#include <asm/page.h>
+#include <asm/mach/arch.h>
+
+#include "atags.h"
+
+static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
+
+#ifndef MEM_SIZE
+#define MEM_SIZE	(16*1024*1024)
+#endif
+
+static struct {
+	struct tag_header hdr1;
+	struct tag_core   core;
+	struct tag_header hdr2;
+	struct tag_mem32  mem;
+	struct tag_header hdr3;
+} default_tags __initdata = {
+	{ tag_size(tag_core), ATAG_CORE },
+	{ 1, PAGE_SIZE, 0xff },
+	{ tag_size(tag_mem32), ATAG_MEM },
+	{ MEM_SIZE },
+	{ 0, ATAG_NONE }
+};
+
+static int __init parse_tag_core(const struct tag *tag)
+{
+	if (tag->hdr.size > 2) {
+		if ((tag->u.core.flags & 1) == 0)
+			root_mountflags &= ~MS_RDONLY;
+		ROOT_DEV = old_decode_dev(tag->u.core.rootdev);
+	}
+	return 0;
+}
+
+__tagtable(ATAG_CORE, parse_tag_core);
+
+static int __init parse_tag_mem32(const struct tag *tag)
+{
+	return arm_add_memory(tag->u.mem.start, tag->u.mem.size);
+}
+
+__tagtable(ATAG_MEM, parse_tag_mem32);
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+static int __init parse_tag_videotext(const struct tag *tag)
+{
+	screen_info.orig_x            = tag->u.videotext.x;
+	screen_info.orig_y            = tag->u.videotext.y;
+	screen_info.orig_video_page   = tag->u.videotext.video_page;
+	screen_info.orig_video_mode   = tag->u.videotext.video_mode;
+	screen_info.orig_video_cols   = tag->u.videotext.video_cols;
+	screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx;
+	screen_info.orig_video_lines  = tag->u.videotext.video_lines;
+	screen_info.orig_video_isVGA  = tag->u.videotext.video_isvga;
+	screen_info.orig_video_points = tag->u.videotext.video_points;
+	return 0;
+}
+
+__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext);
+#endif
+
+#ifdef CONFIG_BLK_DEV_RAM
+static int __init parse_tag_ramdisk(const struct tag *tag)
+{
+	extern int rd_size, rd_image_start, rd_prompt, rd_doload;
+
+	rd_image_start = tag->u.ramdisk.start;
+	rd_doload = (tag->u.ramdisk.flags & 1) == 0;
+	rd_prompt = (tag->u.ramdisk.flags & 2) == 0;
+
+	if (tag->u.ramdisk.size)
+		rd_size = tag->u.ramdisk.size;
+
+	return 0;
+}
+
+__tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
+#endif
+
+static int __init parse_tag_serialnr(const struct tag *tag)
+{
+	system_serial_low = tag->u.serialnr.low;
+	system_serial_high = tag->u.serialnr.high;
+	return 0;
+}
+
+__tagtable(ATAG_SERIAL, parse_tag_serialnr);
+
+static int __init parse_tag_revision(const struct tag *tag)
+{
+	system_rev = tag->u.revision.rev;
+	return 0;
+}
+
+__tagtable(ATAG_REVISION, parse_tag_revision);
+
+static int __init parse_tag_cmdline(const struct tag *tag)
+{
+#if defined(CONFIG_CMDLINE_EXTEND)
+	strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
+	strlcat(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#elif defined(CONFIG_CMDLINE_FORCE)
+	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
+#else
+	strlcpy(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#endif
+	return 0;
+}
+
+__tagtable(ATAG_CMDLINE, parse_tag_cmdline);
+
+/*
+ * Scan the tag table for this tag, and call its parse function.
+ * The tag table is built by the linker from all the __tagtable
+ * declarations.
+ */
+static int __init parse_tag(const struct tag *tag)
+{
+	extern struct tagtable __tagtable_begin, __tagtable_end;
+	struct tagtable *t;
+
+	for (t = &__tagtable_begin; t < &__tagtable_end; t++)
+		if (tag->hdr.tag == t->tag) {
+			t->parse(tag);
+			break;
+		}
+
+	return t < &__tagtable_end;
+}
+
+/*
+ * Parse all tags in the list, checking both the global and architecture
+ * specific tag tables.
+ */
+static void __init parse_tags(const struct tag *t)
+{
+	for (; t->hdr.size; t = tag_next(t))
+		if (!parse_tag(t))
+			printk(KERN_WARNING
+				"Ignoring unrecognised tag 0x%08x\n",
+				t->hdr.tag);
+}
+
+static void __init squash_mem_tags(struct tag *tag)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM)
+			tag->hdr.tag = ATAG_NONE;
+}
+
+struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer,
+						unsigned int machine_nr)
+{
+	struct tag *tags = (struct tag *)&default_tags;
+	struct machine_desc *mdesc = NULL, *p;
+	char *from = default_command_line;
+
+	default_tags.mem.start = PHYS_OFFSET;
+
+	/*
+	 * locate machine in the list of supported machines.
+	 */
+	for_each_machine_desc(p)
+		if (machine_nr == p->nr) {
+			printk("Machine: %s\n", p->name);
+			mdesc = p;
+			break;
+		}
+
+	if (!mdesc) {
+		early_print("\nError: unrecognized/unsupported machine ID"
+			    " (r1 = 0x%08x).\n\n", machine_nr);
+		dump_machine_table(); /* does not return */
+	}
+
+	if (__atags_pointer)
+		tags = phys_to_virt(__atags_pointer);
+	else if (mdesc->atag_offset)
+		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
+
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
+	/*
+	 * If we have the old style parameters, convert them to
+	 * a tag list.
+	 */
+	if (tags->hdr.tag != ATAG_CORE)
+		convert_to_tag_list(tags);
+#endif
+	if (tags->hdr.tag != ATAG_CORE) {
+		early_print("Warning: Neither atags nor dtb found\n");
+		tags = (struct tag *)&default_tags;
+	}
+
+	if (mdesc->fixup)
+		mdesc->fixup(tags, &from, &meminfo);
+
+	if (tags->hdr.tag == ATAG_CORE) {
+		if (meminfo.nr_banks != 0)
+			squash_mem_tags(tags);
+		save_atags(tags);
+		parse_tags(tags);
+	}
+
+	/* parse_early_param needs a boot_command_line */
+	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+	return mdesc;
+}
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/atags_proc.c linux-libre-3.7-gnu/arch/arm/kernel/atags_proc.c
--- linux-libre-3.6-gnu/arch/arm/kernel/atags_proc.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/kernel/atags_proc.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,83 @@
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <asm/setup.h>
+#include <asm/types.h>
+#include <asm/page.h>
+
+struct buffer {
+	size_t size;
+	char data[];
+};
+
+static int
+read_buffer(char* page, char** start, off_t off, int count,
+	int* eof, void* data)
+{
+	struct buffer *buffer = (struct buffer *)data;
+
+	if (off >= buffer->size) {
+		*eof = 1;
+		return 0;
+	}
+
+	count = min((int) (buffer->size - off), count);
+
+	memcpy(page, &buffer->data[off], count);
+
+	return count;
+}
+
+#define BOOT_PARAMS_SIZE 1536
+static char __initdata atags_copy[BOOT_PARAMS_SIZE];
+
+void __init save_atags(const struct tag *tags)
+{
+	memcpy(atags_copy, tags, sizeof(atags_copy));
+}
+
+static int __init init_atags_procfs(void)
+{
+	/*
+	 * This cannot go into save_atags() because kmalloc and proc don't work
+	 * yet when it is called.
+	 */
+	struct proc_dir_entry *tags_entry;
+	struct tag *tag = (struct tag *)atags_copy;
+	struct buffer *b;
+	size_t size;
+
+	if (tag->hdr.tag != ATAG_CORE) {
+		printk(KERN_INFO "No ATAGs?");
+		return -EINVAL;
+	}
+
+	for (; tag->hdr.size; tag = tag_next(tag))
+		;
+
+	/* include the terminating ATAG_NONE */
+	size = (char *)tag - atags_copy + sizeof(struct tag_header);
+
+	WARN_ON(tag->hdr.tag != ATAG_NONE);
+
+	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+	if (!b)
+		goto nomem;
+
+	b->size = size;
+	memcpy(b->data, atags_copy, size);
+
+	tags_entry = create_proc_read_entry("atags", 0400,
+			NULL, read_buffer, b);
+
+	if (!tags_entry)
+		goto nomem;
+
+	return 0;
+
+nomem:
+	kfree(b);
+	printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
+
+	return -ENOMEM;
+}
+arch_initcall(init_atags_procfs);
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/bios32.c linux-libre-3.7-gnu/arch/arm/kernel/bios32.c
--- linux-libre-3.6-gnu/arch/arm/kernel/bios32.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/bios32.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/pci.h>
 
 static int debug_pci;
@@ -270,15 +271,6 @@
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
 
-
-
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	if (debug_pci)
-		printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev));
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 /*
  * If the bus contains any of these devices, then we must not turn on
  * parity checking of any kind.  Currently this is CyberPro 20x0 only.
@@ -423,6 +415,38 @@
 	return irq;
 }
 
+static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+{
+	int ret;
+	struct pci_host_bridge_window *window;
+
+	if (list_empty(&sys->resources)) {
+		pci_add_resource_offset(&sys->resources,
+			 &iomem_resource, sys->mem_offset);
+	}
+
+	list_for_each_entry(window, &sys->resources, list) {
+		if (resource_type(window->res) == IORESOURCE_IO)
+			return 0;
+	}
+
+	sys->io_res.start = (busnr * SZ_64K) ?  : pcibios_min_io;
+	sys->io_res.end = (busnr + 1) * SZ_64K - 1;
+	sys->io_res.flags = IORESOURCE_IO;
+	sys->io_res.name = sys->io_res_name;
+	sprintf(sys->io_res_name, "PCI%d I/O", busnr);
+
+	ret = request_resource(&ioport_resource, &sys->io_res);
+	if (ret) {
+		pr_err("PCI: unable to allocate I/O port region (%d)\n", ret);
+		return ret;
+	}
+	pci_add_resource_offset(&sys->resources, &sys->io_res,
+				sys->io_offset);
+
+	return 0;
+}
+
 static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
 {
 	struct pci_sys_data *sys = NULL;
@@ -445,11 +469,10 @@
 		ret = hw->setup(nr, sys);
 
 		if (ret > 0) {
-			if (list_empty(&sys->resources)) {
-				pci_add_resource_offset(&sys->resources,
-					 &ioport_resource, sys->io_offset);
-				pci_add_resource_offset(&sys->resources,
-					 &iomem_resource, sys->mem_offset);
+			ret = pcibios_init_resources(nr, sys);
+			if (ret)  {
+				kfree(sys);
+				break;
 			}
 
 			if (hw->scan)
@@ -627,3 +650,15 @@
 
 	return 0;
 }
+
+void __init pci_map_io_early(unsigned long pfn)
+{
+	struct map_desc pci_io_desc = {
+		.virtual	= PCI_IO_VIRT_BASE,
+		.type		= MT_DEVICE,
+		.length		= SZ_64K,
+	};
+
+	pci_io_desc.pfn = pfn;
+	iotable_init(&pci_io_desc, 1);
+}
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/calls.S linux-libre-3.7-gnu/arch/arm/kernel/calls.S
--- linux-libre-3.6-gnu/arch/arm/kernel/calls.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/calls.S	2012-12-10 22:30:57.000000000 -0500
@@ -20,7 +20,7 @@
 		CALL(sys_creat)
 		CALL(sys_link)
 /* 10 */	CALL(sys_unlink)
-		CALL(sys_execve_wrapper)
+		CALL(sys_execve)
 		CALL(sys_chdir)
 		CALL(OBSOLETE(sys_time))	/* used by libc4 */
 		CALL(sys_mknod)
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/compat.c linux-libre-3.7-gnu/arch/arm/kernel/compat.c
--- linux-libre-3.6-gnu/arch/arm/kernel/compat.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/compat.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,219 +0,0 @@
-/*
- *  linux/arch/arm/kernel/compat.c
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * We keep the old params compatibility cruft in one place (here)
- * so we don't end up with lots of mess around other places.
- *
- * NOTE:
- *  The old struct param_struct is deprecated, but it will be kept in
- *  the kernel for 5 years from now (2001). This will allow boot loaders
- *  to convert to the new struct tag way.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-
-#include "compat.h"
-
-/*
- * Usage:
- *  - do not go blindly adding fields, add them at the end
- *  - when adding fields, don't rely on the address until
- *    a patch from me has been released
- *  - unused fields should be zero (for future expansion)
- *  - this structure is relatively short-lived - only
- *    guaranteed to contain useful data in setup_arch()
- *
- * This is the old deprecated way to pass parameters to the kernel
- */
-struct param_struct {
-    union {
-	struct {
-	    unsigned long page_size;		/*  0 */
-	    unsigned long nr_pages;		/*  4 */
-	    unsigned long ramdisk_size;		/*  8 */
-	    unsigned long flags;		/* 12 */
-#define FLAG_READONLY	1
-#define FLAG_RDLOAD	4
-#define FLAG_RDPROMPT	8
-	    unsigned long rootdev;		/* 16 */
-	    unsigned long video_num_cols;	/* 20 */
-	    unsigned long video_num_rows;	/* 24 */
-	    unsigned long video_x;		/* 28 */
-	    unsigned long video_y;		/* 32 */
-	    unsigned long memc_control_reg;	/* 36 */
-	    unsigned char sounddefault;		/* 40 */
-	    unsigned char adfsdrives;		/* 41 */
-	    unsigned char bytes_per_char_h;	/* 42 */
-	    unsigned char bytes_per_char_v;	/* 43 */
-	    unsigned long pages_in_bank[4];	/* 44 */
-	    unsigned long pages_in_vram;	/* 60 */
-	    unsigned long initrd_start;		/* 64 */
-	    unsigned long initrd_size;		/* 68 */
-	    unsigned long rd_start;		/* 72 */
-	    unsigned long system_rev;		/* 76 */
-	    unsigned long system_serial_low;	/* 80 */
-	    unsigned long system_serial_high;	/* 84 */
-	    unsigned long mem_fclk_21285;       /* 88 */
-	} s;
-	char unused[256];
-    } u1;
-    union {
-	char paths[8][128];
-	struct {
-	    unsigned long magic;
-	    char n[1024 - sizeof(unsigned long)];
-	} s;
-    } u2;
-    char commandline[COMMAND_LINE_SIZE];
-};
-
-static struct tag * __init memtag(struct tag *tag, unsigned long start, unsigned long size)
-{
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_MEM;
-	tag->hdr.size = tag_size(tag_mem32);
-	tag->u.mem.size = size;
-	tag->u.mem.start = start;
-
-	return tag;
-}
-
-static void __init build_tag_list(struct param_struct *params, void *taglist)
-{
-	struct tag *tag = taglist;
-
-	if (params->u1.s.page_size != PAGE_SIZE) {
-		printk(KERN_WARNING "Warning: bad configuration page, "
-		       "trying to continue\n");
-		return;
-	}
-
-	printk(KERN_DEBUG "Converting old-style param struct to taglist\n");
-
-#ifdef CONFIG_ARCH_NETWINDER
-	if (params->u1.s.nr_pages != 0x02000 &&
-	    params->u1.s.nr_pages != 0x04000 &&
-	    params->u1.s.nr_pages != 0x08000 &&
-	    params->u1.s.nr_pages != 0x10000) {
-		printk(KERN_WARNING "Warning: bad NeTTrom parameters "
-		       "detected, using defaults\n");
-
-		params->u1.s.nr_pages = 0x1000;	/* 16MB */
-		params->u1.s.ramdisk_size = 0;
-		params->u1.s.flags = FLAG_READONLY;
-		params->u1.s.initrd_start = 0;
-		params->u1.s.initrd_size = 0;
-		params->u1.s.rd_start = 0;
-	}
-#endif
-
-	tag->hdr.tag  = ATAG_CORE;
-	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = params->u1.s.flags & FLAG_READONLY;
-	tag->u.core.pagesize = params->u1.s.page_size;
-	tag->u.core.rootdev = params->u1.s.rootdev;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_RAMDISK;
-	tag->hdr.size = tag_size(tag_ramdisk);
-	tag->u.ramdisk.flags = (params->u1.s.flags & FLAG_RDLOAD ? 1 : 0) |
-			       (params->u1.s.flags & FLAG_RDPROMPT ? 2 : 0);
-	tag->u.ramdisk.size  = params->u1.s.ramdisk_size;
-	tag->u.ramdisk.start = params->u1.s.rd_start;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_INITRD;
-	tag->hdr.size = tag_size(tag_initrd);
-	tag->u.initrd.start = params->u1.s.initrd_start;
-	tag->u.initrd.size  = params->u1.s.initrd_size;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_SERIAL;
-	tag->hdr.size = tag_size(tag_serialnr);
-	tag->u.serialnr.low = params->u1.s.system_serial_low;
-	tag->u.serialnr.high = params->u1.s.system_serial_high;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_REVISION;
-	tag->hdr.size = tag_size(tag_revision);
-	tag->u.revision.rev = params->u1.s.system_rev;
-
-#ifdef CONFIG_ARCH_ACORN
-	if (machine_is_riscpc()) {
-		int i;
-		for (i = 0; i < 4; i++)
-			tag = memtag(tag, PHYS_OFFSET + (i << 26),
-				 params->u1.s.pages_in_bank[i] * PAGE_SIZE);
-	} else
-#endif
-	tag = memtag(tag, PHYS_OFFSET, params->u1.s.nr_pages * PAGE_SIZE);
-
-#ifdef CONFIG_FOOTBRIDGE
-	if (params->u1.s.mem_fclk_21285) {
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEMCLK;
-		tag->hdr.size = tag_size(tag_memclk);
-		tag->u.memclk.fmemclk = params->u1.s.mem_fclk_21285;
-	}
-#endif
-
-#ifdef CONFIG_ARCH_EBSA285
-	if (machine_is_ebsa285()) {
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_VIDEOTEXT;
-		tag->hdr.size = tag_size(tag_videotext);
-		tag->u.videotext.x            = params->u1.s.video_x;
-		tag->u.videotext.y            = params->u1.s.video_y;
-		tag->u.videotext.video_page   = 0;
-		tag->u.videotext.video_mode   = 0;
-		tag->u.videotext.video_cols   = params->u1.s.video_num_cols;
-		tag->u.videotext.video_ega_bx = 0;
-		tag->u.videotext.video_lines  = params->u1.s.video_num_rows;
-		tag->u.videotext.video_isvga  = 1;
-		tag->u.videotext.video_points = 8;
-	}
-#endif
-
-#ifdef CONFIG_ARCH_ACORN
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_ACORN;
-	tag->hdr.size = tag_size(tag_acorn);
-	tag->u.acorn.memc_control_reg = params->u1.s.memc_control_reg;
-	tag->u.acorn.vram_pages       = params->u1.s.pages_in_vram;
-	tag->u.acorn.sounddefault     = params->u1.s.sounddefault;
-	tag->u.acorn.adfsdrives       = params->u1.s.adfsdrives;
-#endif
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_CMDLINE;
-	tag->hdr.size = (strlen(params->commandline) + 3 +
-			 sizeof(struct tag_header)) >> 2;
-	strcpy(tag->u.cmdline.cmdline, params->commandline);
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_NONE;
-	tag->hdr.size = 0;
-
-	memmove(params, taglist, ((int)tag) - ((int)taglist) +
-				 sizeof(struct tag_header));
-}
-
-void __init convert_to_tag_list(struct tag *tags)
-{
-	struct param_struct *params = (struct param_struct *)tags;
-	build_tag_list(params, &params->u2);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/compat.h linux-libre-3.7-gnu/arch/arm/kernel/compat.h
--- linux-libre-3.6-gnu/arch/arm/kernel/compat.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/compat.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,11 +0,0 @@
-/*
- *  linux/arch/arm/kernel/compat.h
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void convert_to_tag_list(struct tag *tags);
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/debug.S linux-libre-3.7-gnu/arch/arm/kernel/debug.S
--- linux-libre-3.6-gnu/arch/arm/kernel/debug.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/debug.S	2012-12-10 22:30:57.000000000 -0500
@@ -20,90 +20,9 @@
  * references to these in a production kernel!
  */
 
-#if defined(CONFIG_DEBUG_ICEDCC)
-		@@ debug using ARM EmbeddedICE DCC channel
-
-		.macro	addruart, rp, rv, tmp
-		.endm
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c0, c5, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c0, c1, 0
-		tst	\rx, #0x20000000
-		beq	1001b
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x2000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c0, c1, 0
-		tst	\rx, #0x20000000
-		bne	1001b
-1002:
-		.endm
-
-#elif defined(CONFIG_CPU_XSCALE)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c8, c0, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c14, c0, 0
-		tst	\rx, #0x10000000
-		beq	1001b
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x10000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c14, c0, 0
-		tst	\rx, #0x10000000
-		bne	1001b
-1002:
-		.endm
-
-#else
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c1, c0, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c0, c0, 0
-		tst	\rx, #2
-		beq	1001b
-
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x2000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c0, c0, 0
-		tst	\rx, #2
-		bne	1001b
-1002:
-		.endm
-
-#endif	/* CONFIG_CPU_V6 */
-
-#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
-#include <mach/debug-macro.S>
-#endif	/* CONFIG_DEBUG_ICEDCC */
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
 
 #ifdef CONFIG_MMU
 		.macro	addruart_current, rx, tmp1, tmp2
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/entry-common.S linux-libre-3.7-gnu/arch/arm/kernel/entry-common.S
--- linux-libre-3.6-gnu/arch/arm/kernel/entry-common.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/entry-common.S	2012-12-10 22:30:57.000000000 -0500
@@ -86,14 +86,26 @@
  */
 ENTRY(ret_from_fork)
 	bl	schedule_tail
-	get_thread_info tsk
-	mov	why, #1
+	cmp	r5, #0
+	movne	r0, r4
+	adrne	lr, BSYM(1f)
+	movne	pc, r5
+1:	get_thread_info tsk
 	b	ret_slow_syscall
 ENDPROC(ret_from_fork)
 
 	.equ NR_syscalls,0
 #define CALL(x) .equ NR_syscalls,NR_syscalls+1
 #include "calls.S"
+
+/*
+ * Ensure that the system call table is equal to __NR_syscalls,
+ * which is the value the rest of the system sees
+ */
+.ifne NR_syscalls - __NR_syscalls
+.error "__NR_syscalls is not equal to the size of the syscall table"
+.endif
+
 #undef CALL
 #define CALL(x) .long x
 
@@ -508,11 +520,6 @@
 		b	sys_vfork
 ENDPROC(sys_vfork_wrapper)
 
-sys_execve_wrapper:
-		add	r3, sp, #S_OFF
-		b	sys_execve
-ENDPROC(sys_execve_wrapper)
-
 sys_clone_wrapper:
 		add	ip, sp, #S_OFF
 		str	ip, [sp, #4]
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/head.S linux-libre-3.7-gnu/arch/arm/kernel/head.S
--- linux-libre-3.6-gnu/arch/arm/kernel/head.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/head.S	2012-12-10 22:30:57.000000000 -0500
@@ -23,8 +23,8 @@
 #include <asm/thread_info.h>
 #include <asm/pgtable.h>
 
-#ifdef CONFIG_DEBUG_LL
-#include <mach/debug-macro.S>
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
 #endif
 
 /*
@@ -83,8 +83,12 @@
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
 
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
-						@ and irqs disabled
+#ifdef CONFIG_ARM_VIRT_EXT
+	bl	__hyp_stub_install
+#endif
+	@ ensure svc mode and all interrupts masked
+	safe_svcmode_maskall r9
+
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
@@ -326,7 +330,11 @@
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+#ifdef CONFIG_ARM_VIRT_EXT
+	bl	__hyp_stub_install
+#endif
+	safe_svcmode_maskall r9
+
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/hyp-stub.S linux-libre-3.7-gnu/arch/arm/kernel/hyp-stub.S
--- linux-libre-3.6-gnu/arch/arm/kernel/hyp-stub.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/kernel/hyp-stub.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2012 Linaro Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/virt.h>
+
+#ifndef ZIMAGE
+/*
+ * For the kernel proper, we need to find out the CPU boot mode long after
+ * boot, so we need to store it in a writable variable.
+ *
+ * This is not in .bss, because we set it sufficiently early that the boot-time
+ * zeroing of .bss would clobber it.
+ */
+.data
+ENTRY(__boot_cpu_mode)
+	.long	0
+.text
+
+	/*
+	 * Save the primary CPU boot mode. Requires 3 scratch registers.
+	 */
+	.macro	store_primary_cpu_mode	reg1, reg2, reg3
+	mrs	\reg1, cpsr
+	and	\reg1, \reg1, #MODE_MASK
+	adr	\reg2, .L__boot_cpu_mode_offset
+	ldr	\reg3, [\reg2]
+	str	\reg1, [\reg2, \reg3]
+	.endm
+
+	/*
+	 * Compare the current mode with the one saved on the primary CPU.
+	 * If they don't match, record that fact. The Z bit indicates
+	 * if there's a match or not.
+	 * Requires 3 additionnal scratch registers.
+	 */
+	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
+	adr	\reg2, .L__boot_cpu_mode_offset
+	ldr	\reg3, [\reg2]
+	ldr	\reg1, [\reg2, \reg3]
+	cmp	\mode, \reg1		@ matches primary CPU boot mode?
+	orrne	r7, r7, #BOOT_CPU_MODE_MISMATCH
+	strne	r7, [r5, r6]		@ record what happened and give up
+	.endm
+
+#else	/* ZIMAGE */
+
+	.macro	store_primary_cpu_mode	reg1:req, reg2:req, reg3:req
+	.endm
+
+/*
+ * The zImage loader only runs on one CPU, so we don't bother with mult-CPU
+ * consistency checking:
+ */
+	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
+	cmp	\mode, \mode
+	.endm
+
+#endif /* ZIMAGE */
+
+/*
+ * Hypervisor stub installation functions.
+ *
+ * These must be called with the MMU and D-cache off.
+ * They are not ABI compliant and are only intended to be called from the kernel
+ * entry points in head.S.
+ */
+@ Call this from the primary CPU
+ENTRY(__hyp_stub_install)
+	store_primary_cpu_mode	r4, r5, r6
+ENDPROC(__hyp_stub_install)
+
+	@ fall through...
+
+@ Secondary CPUs should call here
+ENTRY(__hyp_stub_install_secondary)
+	mrs	r4, cpsr
+	and	r4, r4, #MODE_MASK
+
+	/*
+	 * If the secondary has booted with a different mode, give up
+	 * immediately.
+	 */
+	compare_cpu_mode_with_primary	r4, r5, r6, r7
+	bxne	lr
+
+	/*
+	 * Once we have given up on one CPU, we do not try to install the
+	 * stub hypervisor on the remaining ones: because the saved boot mode
+	 * is modified, it can't compare equal to the CPSR mode field any
+	 * more.
+	 *
+	 * Otherwise...
+	 */
+
+	cmp	r4, #HYP_MODE
+	bxne	lr			@ give up if the CPU is not in HYP mode
+
+/*
+ * Configure HSCTLR to set correct exception endianness/instruction set
+ * state etc.
+ * Turn off all traps
+ * Eventually, CPU-specific code might be needed -- assume not for now
+ *
+ * This code relies on the "eret" instruction to synchronize the
+ * various coprocessor accesses.
+ */
+	@ Now install the hypervisor stub:
+	adr	r7, __hyp_stub_vectors
+	mcr	p15, 4, r7, c12, c0, 0	@ set hypervisor vector base (HVBAR)
+
+	@ Disable all traps, so we don't get any nasty surprise
+	mov	r7, #0
+	mcr	p15, 4, r7, c1, c1, 0	@ HCR
+	mcr	p15, 4, r7, c1, c1, 2	@ HCPTR
+	mcr	p15, 4, r7, c1, c1, 3	@ HSTR
+
+THUMB(	orr	r7, #(1 << 30)	)	@ HSCTLR.TE
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	orr	r7, #(1 << 9)		@ HSCTLR.EE
+#endif
+	mcr	p15, 4, r7, c1, c0, 0	@ HSCTLR
+
+	mrc	p15, 4, r7, c1, c1, 1	@ HDCR
+	and	r7, #0x1f		@ Preserve HPMN
+	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
+
+#if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
+	@ make CNTP_* and CNTPCT accessible from PL1
+	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
+	lsr	r7, #16
+	and	r7, #0xf
+	cmp	r7, #1
+	bne	1f
+	mrc	p15, 4, r7, c14, c1, 0	@ CNTHCTL
+	orr	r7, r7, #3		@ PL1PCEN | PL1PCTEN
+	mcr	p15, 4, r7, c14, c1, 0	@ CNTHCTL
+1:
+#endif
+
+	bic	r7, r4, #MODE_MASK
+	orr	r7, r7, #SVC_MODE
+THUMB(	orr	r7, r7, #PSR_T_BIT	)
+	msr	spsr_cxsf, r7		@ This is SPSR_hyp.
+
+	__MSR_ELR_HYP(14)		@ msr elr_hyp, lr
+	__ERET				@ return, switching to SVC mode
+					@ The boot CPU mode is left in r4.
+ENDPROC(__hyp_stub_install_secondary)
+
+__hyp_stub_do_trap:
+	cmp	r0, #-1
+	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	mcrne	p15, 4, r0, c12, c0, 0	@ set HVBAR
+	__ERET
+ENDPROC(__hyp_stub_do_trap)
+
+/*
+ * __hyp_set_vectors: Call this after boot to set the initial hypervisor
+ * vectors as part of hypervisor installation.  On an SMP system, this should
+ * be called on each CPU.
+ *
+ * r0 must be the physical address of the new vector table (which must lie in
+ * the bottom 4GB of physical address space.
+ *
+ * r0 must be 32-byte aligned.
+ *
+ * Before calling this, you must check that the stub hypervisor is installed
+ * everywhere, by waiting for any secondary CPUs to be brought up and then
+ * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true.
+ *
+ * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
+ * something else went wrong... in such cases, trying to install a new
+ * hypervisor is unlikely to work as desired.
+ *
+ * When you call into your shiny new hypervisor, sp_hyp will contain junk,
+ * so you will need to set that to something sensible at the new hypervisor's
+ * initialisation entry point.
+ */
+ENTRY(__hyp_get_vectors)
+	mov	r0, #-1
+ENDPROC(__hyp_get_vectors)
+	@ fall through
+ENTRY(__hyp_set_vectors)
+	__HVC(0)
+	bx	lr
+ENDPROC(__hyp_set_vectors)
+
+#ifndef ZIMAGE
+.align 2
+.L__boot_cpu_mode_offset:
+	.long	__boot_cpu_mode - .
+#endif
+
+.align 5
+__hyp_stub_vectors:
+__hyp_stub_reset:	W(b)	.
+__hyp_stub_und:		W(b)	.
+__hyp_stub_svc:		W(b)	.
+__hyp_stub_pabort:	W(b)	.
+__hyp_stub_dabort:	W(b)	.
+__hyp_stub_trap:	W(b)	__hyp_stub_do_trap
+__hyp_stub_irq:		W(b)	.
+__hyp_stub_fiq:		W(b)	.
+ENDPROC(__hyp_stub_vectors)
+
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/irq.c linux-libre-3.7-gnu/arch/arm/kernel/irq.c
--- linux-libre-3.6-gnu/arch/arm/kernel/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/irq.c	2012-12-10 22:30:57.000000000 -0500
@@ -34,6 +34,7 @@
 #include <linux/list.h>
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
@@ -109,6 +110,7 @@
 	/* Order is clear bits in "clr" then set bits in "set" */
 	irq_modify_status(irq, clr, set & ~clr);
 }
+EXPORT_SYMBOL_GPL(set_irq_flags);
 
 void __init init_IRQ(void)
 {
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/kprobes-test-arm.c linux-libre-3.7-gnu/arch/arm/kernel/kprobes-test-arm.c
--- linux-libre-3.6-gnu/arch/arm/kernel/kprobes-test-arm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/kprobes-test-arm.c	2012-12-10 22:30:57.000000000 -0500
@@ -366,7 +366,9 @@
 	TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
 	TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
 	TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+#endif
 
+#if __LINUX_ARM_ARCH__ >= 7
 	TEST_RRR(  "mls		r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(  "mlshi	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(   "mls		lr, r",1, VAL2,", r",2, VAL3,", r13")
@@ -456,6 +458,8 @@
 	TEST_UNSUPPORTED(".word	0xe1700090") /* Unallocated space */
 #if __LINUX_ARM_ARCH__ >= 6
 	TEST_UNSUPPORTED("ldrex	r2, [sp]")
+#endif
+#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K)
 	TEST_UNSUPPORTED("strexd	r0, r2, r3, [sp]")
 	TEST_UNSUPPORTED("ldrexd	r2, r3, [sp]")
 	TEST_UNSUPPORTED("strexb	r0, r2, [sp]")
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/leds.c linux-libre-3.7-gnu/arch/arm/kernel/leds.c
--- linux-libre-3.6-gnu/arch/arm/kernel/leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/leds.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,121 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- *  Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/string.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
-	const char	name[8];
-	int		on;
-	int		off;
-};
-
-static const struct leds_evt_name evt_names[] = {
-	{ "amber", led_amber_on, led_amber_off },
-	{ "blue",  led_blue_on,  led_blue_off  },
-	{ "green", led_green_on, led_green_off },
-	{ "red",   led_red_on,   led_red_off   },
-};
-
-static ssize_t leds_store(struct device *dev,
-			struct device_attribute *attr,
-			const char *buf, size_t size)
-{
-	int ret = -EINVAL, len = strcspn(buf, " ");
-
-	if (len > 0 && buf[len] == '\0')
-		len--;
-
-	if (strncmp(buf, "claim", len) == 0) {
-		leds_event(led_claim);
-		ret = size;
-	} else if (strncmp(buf, "release", len) == 0) {
-		leds_event(led_release);
-		ret = size;
-	} else {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
-			if (strlen(evt_names[i].name) != len ||
-			    strncmp(buf, evt_names[i].name, len) != 0)
-				continue;
-			if (strncmp(buf+len, " on", 3) == 0) {
-				leds_event(evt_names[i].on);
-				ret = size;
-			} else if (strncmp(buf+len, " off", 4) == 0) {
-				leds_event(evt_names[i].off);
-				ret = size;
-			}
-			break;
-		}
-	}
-	return ret;
-}
-
-static DEVICE_ATTR(event, 0200, NULL, leds_store);
-
-static struct bus_type leds_subsys = {
-	.name		= "leds",
-	.dev_name	= "leds",
-};
-
-static struct device leds_device = {
-	.id		= 0,
-	.bus		= &leds_subsys,
-};
-
-static int leds_suspend(void)
-{
-	leds_event(led_stop);
-	return 0;
-}
-
-static void leds_resume(void)
-{
-	leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
-	leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
-	.shutdown	= leds_shutdown,
-	.suspend	= leds_suspend,
-	.resume		= leds_resume,
-};
-
-static int __init leds_init(void)
-{
-	int ret;
-	ret = subsys_system_register(&leds_subsys, NULL);
-	if (ret == 0)
-		ret = device_register(&leds_device);
-	if (ret == 0)
-		ret = device_create_file(&leds_device, &dev_attr_event);
-	if (ret == 0)
-		register_syscore_ops(&leds_syscore_ops);
-	return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/machine_kexec.c linux-libre-3.7-gnu/arch/arm/kernel/machine_kexec.c
--- linux-libre-3.6-gnu/arch/arm/kernel/machine_kexec.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/machine_kexec.c	2012-12-10 22:30:57.000000000 -0500
@@ -8,7 +8,9 @@
 #include <linux/reboot.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/memblock.h>
 #include <asm/pgtable.h>
+#include <linux/of_fdt.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
@@ -32,6 +34,28 @@
 
 int machine_kexec_prepare(struct kimage *image)
 {
+	struct kexec_segment *current_segment;
+	__be32 header;
+	int i, err;
+
+	/*
+	 * No segment at default ATAGs address. try to locate
+	 * a dtb using magic.
+	 */
+	for (i = 0; i < image->nr_segments; i++) {
+		current_segment = &image->segment[i];
+
+		if (!memblock_is_region_memory(current_segment->mem,
+					       current_segment->memsz))
+			return -EINVAL;
+
+		err = get_user(header, (__be32*)current_segment->buf);
+		if (err)
+			return err;
+
+		if (be32_to_cpu(header) == OF_DT_HEADER)
+			kexec_boot_atags = current_segment->mem;
+	}
 	return 0;
 }
 
@@ -122,7 +146,9 @@
 	kexec_start_address = image->start;
 	kexec_indirection_page = page_list;
 	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+	if (!kexec_boot_atags)
+		kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
 
 	/* copy our kernel relocation code to the control code page */
 	memcpy(reboot_code_buffer,
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/Makefile linux-libre-3.7-gnu/arch/arm/kernel/Makefile
--- linux-libre-3.6-gnu/arch/arm/kernel/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -19,9 +19,10 @@
 		   process.o ptrace.o return_address.o sched_clock.o \
 		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
 
-obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
+obj-$(CONFIG_ATAGS)		+= atags_parse.o
+obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o
+obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o
 
-obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
@@ -52,7 +53,6 @@
 else
 test-kprobes-objs		+= kprobes-test-arm.o
 endif
-obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
@@ -69,8 +69,7 @@
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
-obj-$(CONFIG_CPU_HAS_PMU)	+= pmu.o
-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 
@@ -82,4 +81,6 @@
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
+obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
+
 extra-y := $(head-y) vmlinux.lds
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/perf_event.c linux-libre-3.7-gnu/arch/arm/kernel/perf_event.c
--- linux-libre-3.6-gnu/arch/arm/kernel/perf_event.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/perf_event.c	2012-12-10 22:30:57.000000000 -0500
@@ -12,68 +12,15 @@
  */
 #define pr_fmt(fmt) "hw perfevents: " fmt
 
-#include <linux/bitmap.h>
-#include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/perf_event.h>
 #include <linux/platform_device.h>
-#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
 #include <linux/uaccess.h>
 
-#include <asm/cputype.h>
-#include <asm/irq.h>
 #include <asm/irq_regs.h>
 #include <asm/pmu.h>
 #include <asm/stacktrace.h>
 
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
- * another platform that supports more, we need to increase this to be the
- * largest of all platforms.
- *
- * ARMv7 supports up to 32 events:
- *  cycle counter CCNT + 31 events counters CNT0..30.
- *  Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
- */
-#define ARMPMU_MAX_HWEVENTS		32
-
-static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
-static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
-static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-/* Set at runtime when we know what CPU type we are. */
-static struct arm_pmu *cpu_pmu;
-
-const char *perf_pmu_name(void)
-{
-	if (!cpu_pmu)
-		return NULL;
-
-	return cpu_pmu->pmu.name;
-}
-EXPORT_SYMBOL_GPL(perf_pmu_name);
-
-int perf_num_counters(void)
-{
-	int max_events = 0;
-
-	if (cpu_pmu != NULL)
-		max_events = cpu_pmu->num_events;
-
-	return max_events;
-}
-EXPORT_SYMBOL_GPL(perf_num_counters);
-
-#define HW_OP_UNSUPPORTED		0xFFFF
-
-#define C(_x) \
-	PERF_COUNT_HW_CACHE_##_x
-
-#define CACHE_OP_UNSUPPORTED		0xFFFF
-
 static int
 armpmu_map_cache_event(const unsigned (*cache_map)
 				      [PERF_COUNT_HW_CACHE_MAX]
@@ -104,7 +51,7 @@
 }
 
 static int
-armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
+armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
 {
 	int mapping = (*event_map)[config];
 	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
@@ -116,19 +63,20 @@
 	return (int)(config & raw_event_mask);
 }
 
-static int map_cpu_event(struct perf_event *event,
-			 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
-			 const unsigned (*cache_map)
-					[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX],
-			 u32 raw_event_mask)
+int
+armpmu_map_event(struct perf_event *event,
+		 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+		 const unsigned (*cache_map)
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX],
+		 u32 raw_event_mask)
 {
 	u64 config = event->attr.config;
 
 	switch (event->attr.type) {
 	case PERF_TYPE_HARDWARE:
-		return armpmu_map_event(event_map, config);
+		return armpmu_map_hw_event(event_map, config);
 	case PERF_TYPE_HW_CACHE:
 		return armpmu_map_cache_event(cache_map, config);
 	case PERF_TYPE_RAW:
@@ -148,6 +96,10 @@
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
+	/* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+	if (unlikely(period != hwc->last_period))
+		left = period - (hwc->last_period - left);
+
 	if (unlikely(left <= -period)) {
 		left = period;
 		local64_set(&hwc->period_left, left);
@@ -222,7 +174,6 @@
 	 */
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
-		barrier(); /* why? */
 		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
@@ -350,99 +301,41 @@
 	return 0;
 }
 
-static irqreturn_t armpmu_platform_irq(int irq, void *dev)
+static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 {
 	struct arm_pmu *armpmu = (struct arm_pmu *) dev;
 	struct platform_device *plat_device = armpmu->plat_device;
 	struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
 
-	return plat->handle_irq(irq, dev, armpmu->handle_irq);
+	if (plat && plat->handle_irq)
+		return plat->handle_irq(irq, dev, armpmu->handle_irq);
+	else
+		return armpmu->handle_irq(irq, dev);
 }
 
 static void
 armpmu_release_hardware(struct arm_pmu *armpmu)
 {
-	int i, irq, irqs;
-	struct platform_device *pmu_device = armpmu->plat_device;
-	struct arm_pmu_platdata *plat =
-		dev_get_platdata(&pmu_device->dev);
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-
-	for (i = 0; i < irqs; ++i) {
-		if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
-			continue;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq >= 0) {
-			if (plat && plat->disable_irq)
-				plat->disable_irq(irq);
-			free_irq(irq, armpmu);
-		}
-	}
-
-	release_pmu(armpmu->type);
+	armpmu->free_irq();
+	pm_runtime_put_sync(&armpmu->plat_device->dev);
 }
 
 static int
 armpmu_reserve_hardware(struct arm_pmu *armpmu)
 {
-	struct arm_pmu_platdata *plat;
-	irq_handler_t handle_irq;
-	int i, err, irq, irqs;
+	int err;
 	struct platform_device *pmu_device = armpmu->plat_device;
 
 	if (!pmu_device)
 		return -ENODEV;
 
-	err = reserve_pmu(armpmu->type);
+	pm_runtime_get_sync(&pmu_device->dev);
+	err = armpmu->request_irq(armpmu_dispatch_irq);
 	if (err) {
-		pr_warning("unable to reserve pmu\n");
+		armpmu_release_hardware(armpmu);
 		return err;
 	}
 
-	plat = dev_get_platdata(&pmu_device->dev);
-	if (plat && plat->handle_irq)
-		handle_irq = armpmu_platform_irq;
-	else
-		handle_irq = armpmu->handle_irq;
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-	if (irqs < 1) {
-		pr_err("no irqs for PMUs defined\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < irqs; ++i) {
-		err = 0;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq < 0)
-			continue;
-
-		/*
-		 * If we have a single PMU interrupt that we can't shift,
-		 * assume that we're running on a uniprocessor machine and
-		 * continue. Otherwise, continue without this interrupt.
-		 */
-		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
-			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
-				    irq, i);
-			continue;
-		}
-
-		err = request_irq(irq, handle_irq,
-				  IRQF_DISABLED | IRQF_NOBALANCING,
-				  "arm-pmu", armpmu);
-		if (err) {
-			pr_err("unable to request IRQ%d for ARM PMU counters\n",
-				irq);
-			armpmu_release_hardware(armpmu);
-			return err;
-		} else if (plat && plat->enable_irq)
-			plat->enable_irq(irq);
-
-		cpumask_set_cpu(i, &armpmu->active_irqs);
-	}
-
 	return 0;
 }
 
@@ -581,6 +474,32 @@
 	armpmu->stop();
 }
 
+#ifdef CONFIG_PM_RUNTIME
+static int armpmu_runtime_resume(struct device *dev)
+{
+	struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+	if (plat && plat->runtime_resume)
+		return plat->runtime_resume(dev);
+
+	return 0;
+}
+
+static int armpmu_runtime_suspend(struct device *dev)
+{
+	struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+	if (plat && plat->runtime_suspend)
+		return plat->runtime_suspend(dev);
+
+	return 0;
+}
+#endif
+
+const struct dev_pm_ops armpmu_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL)
+};
+
 static void __init armpmu_init(struct arm_pmu *armpmu)
 {
 	atomic_set(&armpmu->active_events, 0);
@@ -598,174 +517,14 @@
 	};
 }
 
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+int armpmu_register(struct arm_pmu *armpmu, char *name, int type)
 {
 	armpmu_init(armpmu);
+	pr_info("enabled with %s PMU driver, %d counters available\n",
+			armpmu->name, armpmu->num_events);
 	return perf_pmu_register(&armpmu->pmu, name, type);
 }
 
-/* Include the PMU-specific implementations. */
-#include "perf_event_xscale.c"
-#include "perf_event_v6.c"
-#include "perf_event_v7.c"
-
-/*
- * Ensure the PMU has sane values out of reset.
- * This requires SMP to be available, so exists as a separate initcall.
- */
-static int __init
-cpu_pmu_reset(void)
-{
-	if (cpu_pmu && cpu_pmu->reset)
-		return on_each_cpu(cpu_pmu->reset, NULL, 1);
-	return 0;
-}
-arch_initcall(cpu_pmu_reset);
-
-/*
- * PMU platform driver and devicetree bindings.
- */
-static struct of_device_id armpmu_of_device_ids[] = {
-	{.compatible = "arm,cortex-a9-pmu"},
-	{.compatible = "arm,cortex-a8-pmu"},
-	{.compatible = "arm,arm1136-pmu"},
-	{.compatible = "arm,arm1176-pmu"},
-	{},
-};
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
-	{.name = "arm-pmu"},
-	{},
-};
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
-	if (!cpu_pmu)
-		return -ENODEV;
-
-	cpu_pmu->plat_device = pdev;
-	return 0;
-}
-
-static struct platform_driver armpmu_driver = {
-	.driver		= {
-		.name	= "arm-pmu",
-		.of_match_table = armpmu_of_device_ids,
-	},
-	.probe		= armpmu_device_probe,
-	.id_table	= armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
-	return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-static struct pmu_hw_events *armpmu_get_cpu_events(void)
-{
-	return &__get_cpu_var(cpu_hw_events);
-}
-
-static void __init cpu_pmu_init(struct arm_pmu *armpmu)
-{
-	int cpu;
-	for_each_possible_cpu(cpu) {
-		struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
-		events->events = per_cpu(hw_events, cpu);
-		events->used_mask = per_cpu(used_mask, cpu);
-		raw_spin_lock_init(&events->pmu_lock);
-	}
-	armpmu->get_hw_events = armpmu_get_cpu_events;
-	armpmu->type = ARM_PMU_DEVICE_CPU;
-}
-
-/*
- * PMU hardware loses all context when a CPU goes offline.
- * When a CPU is hotplugged back in, since some hardware registers are
- * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
- * junk values out of them.
- */
-static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
-					unsigned long action, void *hcpu)
-{
-	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
-		return NOTIFY_DONE;
-
-	if (cpu_pmu && cpu_pmu->reset)
-		cpu_pmu->reset(NULL);
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
-	.notifier_call = pmu_cpu_notify,
-};
-
-/*
- * CPU PMU identification and registration.
- */
-static int __init
-init_hw_perf_events(void)
-{
-	unsigned long cpuid = read_cpuid_id();
-	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
-	unsigned long part_number = (cpuid & 0xFFF0);
-
-	/* ARM Ltd CPUs. */
-	if (0x41 == implementor) {
-		switch (part_number) {
-		case 0xB360:	/* ARM1136 */
-		case 0xB560:	/* ARM1156 */
-		case 0xB760:	/* ARM1176 */
-			cpu_pmu = armv6pmu_init();
-			break;
-		case 0xB020:	/* ARM11mpcore */
-			cpu_pmu = armv6mpcore_pmu_init();
-			break;
-		case 0xC080:	/* Cortex-A8 */
-			cpu_pmu = armv7_a8_pmu_init();
-			break;
-		case 0xC090:	/* Cortex-A9 */
-			cpu_pmu = armv7_a9_pmu_init();
-			break;
-		case 0xC050:	/* Cortex-A5 */
-			cpu_pmu = armv7_a5_pmu_init();
-			break;
-		case 0xC0F0:	/* Cortex-A15 */
-			cpu_pmu = armv7_a15_pmu_init();
-			break;
-		case 0xC070:	/* Cortex-A7 */
-			cpu_pmu = armv7_a7_pmu_init();
-			break;
-		}
-	/* Intel CPUs [xscale]. */
-	} else if (0x69 == implementor) {
-		part_number = (cpuid >> 13) & 0x7;
-		switch (part_number) {
-		case 1:
-			cpu_pmu = xscale1pmu_init();
-			break;
-		case 2:
-			cpu_pmu = xscale2pmu_init();
-			break;
-		}
-	}
-
-	if (cpu_pmu) {
-		pr_info("enabled with %s PMU driver, %d counters available\n",
-			cpu_pmu->name, cpu_pmu->num_events);
-		cpu_pmu_init(cpu_pmu);
-		register_cpu_notifier(&pmu_cpu_notifier);
-		armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
-	} else {
-		pr_info("no hardware support available\n");
-	}
-
-	return 0;
-}
-early_initcall(init_hw_perf_events);
-
 /*
  * Callchain handling code.
  */
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/perf_event_cpu.c linux-libre-3.7-gnu/arch/arm/kernel/perf_event_cpu.c
--- linux-libre-3.6-gnu/arch/arm/kernel/perf_event_cpu.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/kernel/perf_event_cpu.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,295 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+#define pr_fmt(fmt) "CPU PMU: " fmt
+
+#include <linux/bitmap.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <asm/cputype.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+
+/* Set at runtime when we know what CPU type we are. */
+static struct arm_pmu *cpu_pmu;
+
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
+
+/*
+ * Despite the names, these two functions are CPU-specific and are used
+ * by the OProfile/perf code.
+ */
+const char *perf_pmu_name(void)
+{
+	if (!cpu_pmu)
+		return NULL;
+
+	return cpu_pmu->pmu.name;
+}
+EXPORT_SYMBOL_GPL(perf_pmu_name);
+
+int perf_num_counters(void)
+{
+	int max_events = 0;
+
+	if (cpu_pmu != NULL)
+		max_events = cpu_pmu->num_events;
+
+	return max_events;
+}
+EXPORT_SYMBOL_GPL(perf_num_counters);
+
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
+
+static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
+{
+	return &__get_cpu_var(cpu_hw_events);
+}
+
+static void cpu_pmu_free_irq(void)
+{
+	int i, irq, irqs;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+	for (i = 0; i < irqs; ++i) {
+		if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs))
+			continue;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq >= 0)
+			free_irq(irq, cpu_pmu);
+	}
+}
+
+static int cpu_pmu_request_irq(irq_handler_t handler)
+{
+	int i, err, irq, irqs;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+	if (!pmu_device)
+		return -ENODEV;
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+	if (irqs < 1) {
+		pr_err("no irqs for PMUs defined\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < irqs; ++i) {
+		err = 0;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq < 0)
+			continue;
+
+		/*
+		 * If we have a single PMU interrupt that we can't shift,
+		 * assume that we're running on a uniprocessor machine and
+		 * continue. Otherwise, continue without this interrupt.
+		 */
+		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+				    irq, i);
+			continue;
+		}
+
+		err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu",
+				  cpu_pmu);
+		if (err) {
+			pr_err("unable to request IRQ%d for ARM PMU counters\n",
+				irq);
+			return err;
+		}
+
+		cpumask_set_cpu(i, &cpu_pmu->active_irqs);
+	}
+
+	return 0;
+}
+
+static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	int cpu;
+	for_each_possible_cpu(cpu) {
+		struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+		events->events = per_cpu(hw_events, cpu);
+		events->used_mask = per_cpu(used_mask, cpu);
+		raw_spin_lock_init(&events->pmu_lock);
+	}
+
+	cpu_pmu->get_hw_events	= cpu_pmu_get_cpu_events;
+	cpu_pmu->request_irq	= cpu_pmu_request_irq;
+	cpu_pmu->free_irq	= cpu_pmu_free_irq;
+
+	/* Ensure the PMU has sane values out of reset. */
+	if (cpu_pmu && cpu_pmu->reset)
+		on_each_cpu(cpu_pmu->reset, NULL, 1);
+}
+
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
+				    unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
+	.notifier_call = cpu_pmu_notify,
+};
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
+	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
+	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
+	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
+	{.compatible = "arm,cortex-a7-pmu",	.data = armv7_a7_pmu_init},
+	{.compatible = "arm,cortex-a5-pmu",	.data = armv7_a5_pmu_init},
+	{.compatible = "arm,arm11mpcore-pmu",	.data = armv6mpcore_pmu_init},
+	{.compatible = "arm,arm1176-pmu",	.data = armv6pmu_init},
+	{.compatible = "arm,arm1136-pmu",	.data = armv6pmu_init},
+	{},
+};
+
+static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
+	{.name = "arm-pmu"},
+	{},
+};
+
+/*
+ * CPU PMU identification and probing.
+ */
+static struct arm_pmu *__devinit probe_current_pmu(void)
+{
+	struct arm_pmu *pmu = NULL;
+	int cpu = get_cpu();
+	unsigned long cpuid = read_cpuid_id();
+	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
+	unsigned long part_number = (cpuid & 0xFFF0);
+
+	pr_info("probing PMU on CPU %d\n", cpu);
+
+	/* ARM Ltd CPUs. */
+	if (0x41 == implementor) {
+		switch (part_number) {
+		case 0xB360:	/* ARM1136 */
+		case 0xB560:	/* ARM1156 */
+		case 0xB760:	/* ARM1176 */
+			pmu = armv6pmu_init();
+			break;
+		case 0xB020:	/* ARM11mpcore */
+			pmu = armv6mpcore_pmu_init();
+			break;
+		case 0xC080:	/* Cortex-A8 */
+			pmu = armv7_a8_pmu_init();
+			break;
+		case 0xC090:	/* Cortex-A9 */
+			pmu = armv7_a9_pmu_init();
+			break;
+		case 0xC050:	/* Cortex-A5 */
+			pmu = armv7_a5_pmu_init();
+			break;
+		case 0xC0F0:	/* Cortex-A15 */
+			pmu = armv7_a15_pmu_init();
+			break;
+		case 0xC070:	/* Cortex-A7 */
+			pmu = armv7_a7_pmu_init();
+			break;
+		}
+	/* Intel CPUs [xscale]. */
+	} else if (0x69 == implementor) {
+		part_number = (cpuid >> 13) & 0x7;
+		switch (part_number) {
+		case 1:
+			pmu = xscale1pmu_init();
+			break;
+		case 2:
+			pmu = xscale2pmu_init();
+			break;
+		}
+	}
+
+	put_cpu();
+	return pmu;
+}
+
+static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id;
+	struct arm_pmu *(*init_fn)(void);
+	struct device_node *node = pdev->dev.of_node;
+
+	if (cpu_pmu) {
+		pr_info("attempt to register multiple PMU devices!");
+		return -ENOSPC;
+	}
+
+	if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) {
+		init_fn = of_id->data;
+		cpu_pmu = init_fn();
+	} else {
+		cpu_pmu = probe_current_pmu();
+	}
+
+	if (!cpu_pmu)
+		return -ENODEV;
+
+	cpu_pmu->plat_device = pdev;
+	cpu_pmu_init(cpu_pmu);
+	register_cpu_notifier(&cpu_pmu_hotplug_notifier);
+	armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
+
+	return 0;
+}
+
+static struct platform_driver cpu_pmu_driver = {
+	.driver		= {
+		.name	= "arm-pmu",
+		.pm	= &armpmu_dev_pm_ops,
+		.of_match_table = cpu_pmu_of_device_ids,
+	},
+	.probe		= cpu_pmu_device_probe,
+	.id_table	= cpu_pmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+	return platform_driver_register(&cpu_pmu_driver);
+}
+device_initcall(register_pmu_driver);
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/perf_event_v6.c linux-libre-3.7-gnu/arch/arm/kernel/perf_event_v6.c
--- linux-libre-3.6-gnu/arch/arm/kernel/perf_event_v6.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/perf_event_v6.c	2012-12-10 22:30:57.000000000 -0500
@@ -645,7 +645,7 @@
 
 static int armv6_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv6_perf_map,
+	return armpmu_map_event(event, &armv6_perf_map,
 				&armv6_perf_cache_map, 0xFF);
 }
 
@@ -664,7 +664,7 @@
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__devinit armv6pmu_init(void)
 {
 	return &armv6pmu;
 }
@@ -679,7 +679,7 @@
 
 static int armv6mpcore_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv6mpcore_perf_map,
+	return armpmu_map_event(event, &armv6mpcore_perf_map,
 				&armv6mpcore_perf_cache_map, 0xFF);
 }
 
@@ -698,17 +698,17 @@
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__devinit armv6mpcore_pmu_init(void)
 {
 	return &armv6mpcore_pmu;
 }
 #else
-static struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__devinit armv6pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__devinit armv6mpcore_pmu_init(void)
 {
 	return NULL;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/perf_event_v7.c linux-libre-3.7-gnu/arch/arm/kernel/perf_event_v7.c
--- linux-libre-3.6-gnu/arch/arm/kernel/perf_event_v7.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/perf_event_v7.c	2012-12-10 22:30:57.000000000 -0500
@@ -1204,31 +1204,31 @@
 
 static int armv7_a8_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a8_perf_map,
+	return armpmu_map_event(event, &armv7_a8_perf_map,
 				&armv7_a8_perf_cache_map, 0xFF);
 }
 
 static int armv7_a9_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a9_perf_map,
+	return armpmu_map_event(event, &armv7_a9_perf_map,
 				&armv7_a9_perf_cache_map, 0xFF);
 }
 
 static int armv7_a5_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a5_perf_map,
+	return armpmu_map_event(event, &armv7_a5_perf_map,
 				&armv7_a5_perf_cache_map, 0xFF);
 }
 
 static int armv7_a15_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a15_perf_map,
+	return armpmu_map_event(event, &armv7_a15_perf_map,
 				&armv7_a15_perf_cache_map, 0xFF);
 }
 
 static int armv7_a7_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a7_perf_map,
+	return armpmu_map_event(event, &armv7_a7_perf_map,
 				&armv7_a7_perf_cache_map, 0xFF);
 }
 
@@ -1245,7 +1245,7 @@
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static u32 __init armv7_read_num_pmnc_events(void)
+static u32 __devinit armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;
 
@@ -1256,7 +1256,7 @@
 	return nb_cnt + 1;
 }
 
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a8_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A8";
 	armv7pmu.map_event	= armv7_a8_map_event;
@@ -1264,7 +1264,7 @@
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a9_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A9";
 	armv7pmu.map_event	= armv7_a9_map_event;
@@ -1272,7 +1272,7 @@
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a5_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A5";
 	armv7pmu.map_event	= armv7_a5_map_event;
@@ -1280,7 +1280,7 @@
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a15_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A15";
 	armv7pmu.map_event	= armv7_a15_map_event;
@@ -1289,7 +1289,7 @@
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a7_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A7";
 	armv7pmu.map_event	= armv7_a7_map_event;
@@ -1298,27 +1298,27 @@
 	return &armv7pmu;
 }
 #else
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a8_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a9_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a5_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a15_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a7_pmu_init(void)
 {
 	return NULL;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/perf_event_xscale.c linux-libre-3.7-gnu/arch/arm/kernel/perf_event_xscale.c
--- linux-libre-3.6-gnu/arch/arm/kernel/perf_event_xscale.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/perf_event_xscale.c	2012-12-10 22:30:57.000000000 -0500
@@ -430,7 +430,7 @@
 
 static int xscale_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &xscale_perf_map,
+	return armpmu_map_event(event, &xscale_perf_map,
 				&xscale_perf_cache_map, 0xFF);
 }
 
@@ -449,7 +449,7 @@
 	.max_period	= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__devinit xscale1pmu_init(void)
 {
 	return &xscale1pmu;
 }
@@ -816,17 +816,17 @@
 	.max_period	= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__devinit xscale2pmu_init(void)
 {
 	return &xscale2pmu;
 }
 #else
-static struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__devinit xscale1pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__devinit xscale2pmu_init(void)
 {
 	return NULL;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/pmu.c linux-libre-3.7-gnu/arch/arm/kernel/pmu.c
--- linux-libre-3.6-gnu/arch/arm/kernel/pmu.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/pmu.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,36 +0,0 @@
-/*
- *  linux/arch/arm/kernel/pmu.c
- *
- *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- *  Copyright (C) 2010 ARM Ltd, Will Deacon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/pmu.h>
-
-/*
- * PMU locking to ensure mutual exclusion between different subsystems.
- */
-static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-
-int
-reserve_pmu(enum arm_pmu_type type)
-{
-	return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
-}
-EXPORT_SYMBOL_GPL(reserve_pmu);
-
-void
-release_pmu(enum arm_pmu_type type)
-{
-	clear_bit_unlock(type, pmu_lock);
-}
-EXPORT_SYMBOL_GPL(release_pmu);
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/process.c linux-libre-3.7-gnu/arch/arm/kernel/process.c
--- linux-libre-3.6-gnu/arch/arm/kernel/process.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/process.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,9 +31,9 @@
 #include <linux/random.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/cpuidle.h>
+#include <linux/leds.h>
 
 #include <asm/cacheflush.h>
-#include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/thread_notify.h>
 #include <asm/stacktrace.h>
@@ -189,7 +189,7 @@
 	while (1) {
 		tick_nohz_idle_enter();
 		rcu_idle_enter();
-		leds_event(led_idle_start);
+		ledtrig_cpu(CPU_LED_IDLE_START);
 		while (!need_resched()) {
 #ifdef CONFIG_HOTPLUG_CPU
 			if (cpu_is_offline(smp_processor_id()))
@@ -220,7 +220,7 @@
 			} else
 				local_irq_enable();
 		}
-		leds_event(led_idle_end);
+		ledtrig_cpu(CPU_LED_IDLE_END);
 		rcu_idle_exit();
 		tick_nohz_idle_exit();
 		schedule_preempt_disabled();
@@ -381,13 +381,20 @@
 	struct thread_info *thread = task_thread_info(p);
 	struct pt_regs *childregs = task_pt_regs(p);
 
-	*childregs = *regs;
-	childregs->ARM_r0 = 0;
-	childregs->ARM_sp = stack_start;
-
 	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
-	thread->cpu_context.sp = (unsigned long)childregs;
+
+	if (likely(regs)) {
+		*childregs = *regs;
+		childregs->ARM_r0 = 0;
+		childregs->ARM_sp = stack_start;
+	} else {
+		memset(childregs, 0, sizeof(struct pt_regs));
+		thread->cpu_context.r4 = stk_sz;
+		thread->cpu_context.r5 = stack_start;
+		childregs->ARM_cpsr = SVC_MODE;
+	}
 	thread->cpu_context.pc = (unsigned long)ret_from_fork;
+	thread->cpu_context.sp = (unsigned long)childregs;
 
 	clear_ptrace_hw_breakpoint(p);
 
@@ -423,63 +430,6 @@
 }
 EXPORT_SYMBOL(dump_fpu);
 
-/*
- * Shuffle the argument into the correct register before calling the
- * thread function.  r4 is the thread argument, r5 is the pointer to
- * the thread function, and r6 points to the exit function.
- */
-extern void kernel_thread_helper(void);
-asm(	".pushsection .text\n"
-"	.align\n"
-"	.type	kernel_thread_helper, #function\n"
-"kernel_thread_helper:\n"
-#ifdef CONFIG_TRACE_IRQFLAGS
-"	bl	trace_hardirqs_on\n"
-#endif
-"	msr	cpsr_c, r7\n"
-"	mov	r0, r4\n"
-"	mov	lr, r6\n"
-"	mov	pc, r5\n"
-"	.size	kernel_thread_helper, . - kernel_thread_helper\n"
-"	.popsection");
-
-#ifdef CONFIG_ARM_UNWIND
-extern void kernel_thread_exit(long code);
-asm(	".pushsection .text\n"
-"	.align\n"
-"	.type	kernel_thread_exit, #function\n"
-"kernel_thread_exit:\n"
-"	.fnstart\n"
-"	.cantunwind\n"
-"	bl	do_exit\n"
-"	nop\n"
-"	.fnend\n"
-"	.size	kernel_thread_exit, . - kernel_thread_exit\n"
-"	.popsection");
-#else
-#define kernel_thread_exit	do_exit
-#endif
-
-/*
- * Create a kernel thread.
- */
-pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
-{
-	struct pt_regs regs;
-
-	memset(&regs, 0, sizeof(regs));
-
-	regs.ARM_r4 = (unsigned long)arg;
-	regs.ARM_r5 = (unsigned long)fn;
-	regs.ARM_r6 = (unsigned long)kernel_thread_exit;
-	regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
-	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
-
-	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
-}
-EXPORT_SYMBOL(kernel_thread);
-
 unsigned long get_wchan(struct task_struct *p)
 {
 	struct stackframe frame;
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/ptrace.c linux-libre-3.7-gnu/arch/arm/kernel/ptrace.c
--- linux-libre-3.6-gnu/arch/arm/kernel/ptrace.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/ptrace.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,6 +30,9 @@
 #include <asm/pgtable.h>
 #include <asm/traps.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 #define REG_PC	15
 #define REG_PSR	16
 /*
@@ -918,11 +921,11 @@
 {
 	unsigned long ip;
 
+	current_thread_info()->syscall = scno;
+
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return scno;
 
-	current_thread_info()->syscall = scno;
-
 	/*
 	 * IP is used to denote syscall entry/exit:
 	 * IP = 0 -> entry, =1 -> exit
@@ -941,15 +944,19 @@
 
 asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
 {
-	int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER);
+	scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER);
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_enter(regs, scno);
 	audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1,
 			    regs->ARM_r2, regs->ARM_r3);
-	return ret;
+	return scno;
 }
 
 asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno)
 {
-	int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT);
+	scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT);
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_exit(regs, scno);
 	audit_syscall_exit(regs);
-	return ret;
+	return scno;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/sched_clock.c linux-libre-3.7-gnu/arch/arm/kernel/sched_clock.c
--- linux-libre-3.6-gnu/arch/arm/kernel/sched_clock.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/sched_clock.c	2012-12-10 22:30:57.000000000 -0500
@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
+#include <linux/moduleparam.h>
 #include <linux/sched.h>
 #include <linux/syscore_ops.h>
 #include <linux/timer.h>
@@ -27,6 +28,9 @@
 
 static void sched_clock_poll(unsigned long wrap_ticks);
 static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
+static int irqtime = -1;
+
+core_param(irqtime, irqtime, int, 0400);
 
 static struct clock_data cd = {
 	.mult	= NSEC_PER_SEC / HZ,
@@ -103,13 +107,6 @@
 	update_sched_clock();
 }
 
-void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate)
-{
-	setup_sched_clock(read, bits, rate);
-	cd.needs_suspend = true;
-}
-
 void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
@@ -157,6 +154,10 @@
 	 */
 	cd.epoch_ns = 0;
 
+	/* Enable IRQ time accounting if we have a fast enough sched_clock */
+	if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
+		enable_sched_clock_irqtime();
+
 	pr_debug("Registered %pF as sched_clock source\n", read);
 }
 
@@ -181,18 +182,15 @@
 static int sched_clock_suspend(void)
 {
 	sched_clock_poll(sched_clock_timer.data);
-	if (cd.needs_suspend)
-		cd.suspended = true;
+	cd.suspended = true;
 	return 0;
 }
 
 static void sched_clock_resume(void)
 {
-	if (cd.needs_suspend) {
-		cd.epoch_cyc = read_sched_clock();
-		cd.epoch_cyc_copy = cd.epoch_cyc;
-		cd.suspended = false;
-	}
+	cd.epoch_cyc = read_sched_clock();
+	cd.epoch_cyc_copy = cd.epoch_cyc;
+	cd.suspended = false;
 }
 
 static struct syscore_ops sched_clock_ops = {
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/setup.c linux-libre-3.7-gnu/arch/arm/kernel/setup.c
--- linux-libre-3.6-gnu/arch/arm/kernel/setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,11 +21,9 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/of_fdt.h>
-#include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
-#include <linux/fs.h>
 #include <linux/proc_fs.h>
 #include <linux/memblock.h>
 #include <linux/bug.h>
@@ -55,16 +53,11 @@
 #include <asm/traps.h>
 #include <asm/unwind.h>
 #include <asm/memblock.h>
+#include <asm/virt.h>
 
-#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
-#include "compat.h"
-#endif
 #include "atags.h"
 #include "tcm.h"
 
-#ifndef MEM_SIZE
-#define MEM_SIZE	(16*1024*1024)
-#endif
 
 #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE)
 char fpe_type[8];
@@ -145,7 +138,6 @@
 static char __initdata cmd_line[COMMAND_LINE_SIZE];
 struct machine_desc *machine_desc __initdata;
 
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
 #define ENDIANNESS ((char)endian_test.l)
 
@@ -583,21 +575,6 @@
 }
 early_param("mem", early_mem);
 
-static void __init
-setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
-{
-#ifdef CONFIG_BLK_DEV_RAM
-	extern int rd_size, rd_image_start, rd_prompt, rd_doload;
-
-	rd_image_start = image_start;
-	rd_prompt = prompt;
-	rd_doload = doload;
-
-	if (rd_sz)
-		rd_size = rd_sz;
-#endif
-}
-
 static void __init request_standard_resources(struct machine_desc *mdesc)
 {
 	struct memblock_region *region;
@@ -643,35 +620,6 @@
 		request_resource(&ioport_resource, &lp2);
 }
 
-/*
- *  Tag parsing.
- *
- * This is the new way of passing data to the kernel at boot time.  Rather
- * than passing a fixed inflexible structure to the kernel, we pass a list
- * of variable-sized tags to the kernel.  The first tag must be a ATAG_CORE
- * tag for the list to be recognised (to distinguish the tagged list from
- * a param_struct).  The list is terminated with a zero-length tag (this tag
- * is not parsed in any way).
- */
-static int __init parse_tag_core(const struct tag *tag)
-{
-	if (tag->hdr.size > 2) {
-		if ((tag->u.core.flags & 1) == 0)
-			root_mountflags &= ~MS_RDONLY;
-		ROOT_DEV = old_decode_dev(tag->u.core.rootdev);
-	}
-	return 0;
-}
-
-__tagtable(ATAG_CORE, parse_tag_core);
-
-static int __init parse_tag_mem32(const struct tag *tag)
-{
-	return arm_add_memory(tag->u.mem.start, tag->u.mem.size);
-}
-
-__tagtable(ATAG_MEM, parse_tag_mem32);
-
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = {
  .orig_video_lines	= 30,
@@ -681,117 +629,8 @@
  .orig_video_isVGA	= 1,
  .orig_video_points	= 8
 };
-
-static int __init parse_tag_videotext(const struct tag *tag)
-{
-	screen_info.orig_x            = tag->u.videotext.x;
-	screen_info.orig_y            = tag->u.videotext.y;
-	screen_info.orig_video_page   = tag->u.videotext.video_page;
-	screen_info.orig_video_mode   = tag->u.videotext.video_mode;
-	screen_info.orig_video_cols   = tag->u.videotext.video_cols;
-	screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx;
-	screen_info.orig_video_lines  = tag->u.videotext.video_lines;
-	screen_info.orig_video_isVGA  = tag->u.videotext.video_isvga;
-	screen_info.orig_video_points = tag->u.videotext.video_points;
-	return 0;
-}
-
-__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext);
 #endif
 
-static int __init parse_tag_ramdisk(const struct tag *tag)
-{
-	setup_ramdisk((tag->u.ramdisk.flags & 1) == 0,
-		      (tag->u.ramdisk.flags & 2) == 0,
-		      tag->u.ramdisk.start, tag->u.ramdisk.size);
-	return 0;
-}
-
-__tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
-
-static int __init parse_tag_serialnr(const struct tag *tag)
-{
-	system_serial_low = tag->u.serialnr.low;
-	system_serial_high = tag->u.serialnr.high;
-	return 0;
-}
-
-__tagtable(ATAG_SERIAL, parse_tag_serialnr);
-
-static int __init parse_tag_revision(const struct tag *tag)
-{
-	system_rev = tag->u.revision.rev;
-	return 0;
-}
-
-__tagtable(ATAG_REVISION, parse_tag_revision);
-
-static int __init parse_tag_cmdline(const struct tag *tag)
-{
-#if defined(CONFIG_CMDLINE_EXTEND)
-	strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
-	strlcat(default_command_line, tag->u.cmdline.cmdline,
-		COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
-	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
-#else
-	strlcpy(default_command_line, tag->u.cmdline.cmdline,
-		COMMAND_LINE_SIZE);
-#endif
-	return 0;
-}
-
-__tagtable(ATAG_CMDLINE, parse_tag_cmdline);
-
-/*
- * Scan the tag table for this tag, and call its parse function.
- * The tag table is built by the linker from all the __tagtable
- * declarations.
- */
-static int __init parse_tag(const struct tag *tag)
-{
-	extern struct tagtable __tagtable_begin, __tagtable_end;
-	struct tagtable *t;
-
-	for (t = &__tagtable_begin; t < &__tagtable_end; t++)
-		if (tag->hdr.tag == t->tag) {
-			t->parse(tag);
-			break;
-		}
-
-	return t < &__tagtable_end;
-}
-
-/*
- * Parse all tags in the list, checking both the global and architecture
- * specific tag tables.
- */
-static void __init parse_tags(const struct tag *t)
-{
-	for (; t->hdr.size; t = tag_next(t))
-		if (!parse_tag(t))
-			printk(KERN_WARNING
-				"Ignoring unrecognised tag 0x%08x\n",
-				t->hdr.tag);
-}
-
-/*
- * This holds our defaults.
- */
-static struct init_tags {
-	struct tag_header hdr1;
-	struct tag_core   core;
-	struct tag_header hdr2;
-	struct tag_mem32  mem;
-	struct tag_header hdr3;
-} init_tags __initdata = {
-	{ tag_size(tag_core), ATAG_CORE },
-	{ 1, PAGE_SIZE, 0xff },
-	{ tag_size(tag_mem32), ATAG_MEM },
-	{ MEM_SIZE },
-	{ 0, ATAG_NONE }
-};
-
 static int __init customize_machine(void)
 {
 	/* customizes platform devices, or adds new ones */
@@ -858,78 +697,6 @@
 static inline void reserve_crashkernel(void) {}
 #endif /* CONFIG_KEXEC */
 
-static void __init squash_mem_tags(struct tag *tag)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM)
-			tag->hdr.tag = ATAG_NONE;
-}
-
-static struct machine_desc * __init setup_machine_tags(unsigned int nr)
-{
-	struct tag *tags = (struct tag *)&init_tags;
-	struct machine_desc *mdesc = NULL, *p;
-	char *from = default_command_line;
-
-	init_tags.mem.start = PHYS_OFFSET;
-
-	/*
-	 * locate machine in the list of supported machines.
-	 */
-	for_each_machine_desc(p)
-		if (nr == p->nr) {
-			printk("Machine: %s\n", p->name);
-			mdesc = p;
-			break;
-		}
-
-	if (!mdesc) {
-		early_print("\nError: unrecognized/unsupported machine ID"
-			" (r1 = 0x%08x).\n\n", nr);
-		dump_machine_table(); /* does not return */
-	}
-
-	if (__atags_pointer)
-		tags = phys_to_virt(__atags_pointer);
-	else if (mdesc->atag_offset)
-		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
-
-#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
-	/*
-	 * If we have the old style parameters, convert them to
-	 * a tag list.
-	 */
-	if (tags->hdr.tag != ATAG_CORE)
-		convert_to_tag_list(tags);
-#endif
-
-	if (tags->hdr.tag != ATAG_CORE) {
-#if defined(CONFIG_OF)
-		/*
-		 * If CONFIG_OF is set, then assume this is a reasonably
-		 * modern system that should pass boot parameters
-		 */
-		early_print("Warning: Neither atags nor dtb found\n");
-#endif
-		tags = (struct tag *)&init_tags;
-	}
-
-	if (mdesc->fixup)
-		mdesc->fixup(tags, &from, &meminfo);
-
-	if (tags->hdr.tag == ATAG_CORE) {
-		if (meminfo.nr_banks != 0)
-			squash_mem_tags(tags);
-		save_atags(tags);
-		parse_tags(tags);
-	}
-
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
-	return mdesc;
-}
-
 static int __init meminfo_cmp(const void *_a, const void *_b)
 {
 	const struct membank *a = _a, *b = _b;
@@ -937,6 +704,21 @@
 	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
 }
 
+void __init hyp_mode_check(void)
+{
+#ifdef CONFIG_ARM_VIRT_EXT
+	if (is_hyp_mode_available()) {
+		pr_info("CPU: All CPU(s) started in HYP mode.\n");
+		pr_info("CPU: Virtualization extensions available.\n");
+	} else if (is_hyp_mode_mismatched()) {
+		pr_warn("CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x%x)\n",
+			__boot_cpu_mode & MODE_MASK);
+		pr_warn("CPU: This may indicate a broken bootloader or firmware.\n");
+	} else
+		pr_info("CPU: All CPU(s) started in SVC mode.\n");
+#endif
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	struct machine_desc *mdesc;
@@ -944,7 +726,7 @@
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
 	if (!mdesc)
-		mdesc = setup_machine_tags(machine_arch_type);
+		mdesc = setup_machine_tags(__atags_pointer, machine_arch_type);
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
@@ -977,9 +759,15 @@
 	unflatten_device_tree();
 
 #ifdef CONFIG_SMP
-	if (is_smp())
+	if (is_smp()) {
+		smp_set_ops(mdesc->smp);
 		smp_init_cpus();
+	}
 #endif
+
+	if (!is_smp())
+		hyp_mode_check();
+
 	reserve_crashkernel();
 
 	tcm_init();
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/signal.c linux-libre-3.7-gnu/arch/arm/kernel/signal.c
--- linux-libre-3.6-gnu/arch/arm/kernel/signal.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/signal.c	2012-12-10 22:30:57.000000000 -0500
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/personality.h>
-#include <linux/freezer.h>
 #include <linux/uaccess.h>
 #include <linux/tracehook.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/smp.c linux-libre-3.7-gnu/arch/arm/kernel/smp.c
--- linux-libre-3.6-gnu/arch/arm/kernel/smp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/smp.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,14 +19,15 @@
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/cpu.h>
-#include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
 #include <linux/completion.h>
+#include <linux/cpufreq.h>
 
 #include <linux/atomic.h>
+#include <asm/smp.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
@@ -42,6 +43,8 @@
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
 #include <asm/smp_plat.h>
+#include <asm/virt.h>
+#include <asm/mach/arch.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -50,8 +53,15 @@
  */
 struct secondary_data secondary_data;
 
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
 enum ipi_msg_type {
-	IPI_TIMER = 2,
+	IPI_WAKEUP,
+	IPI_TIMER,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_CALL_FUNC_SINGLE,
@@ -60,6 +70,14 @@
 
 static DECLARE_COMPLETION(cpu_running);
 
+static struct smp_operations smp_ops;
+
+void __init smp_set_ops(struct smp_operations *ops)
+{
+	if (ops)
+		smp_ops = *ops;
+};
+
 int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
@@ -100,13 +118,64 @@
 	return ret;
 }
 
+/* platform specific SMP operations */
+void __init smp_init_cpus(void)
+{
+	if (smp_ops.smp_init_cpus)
+		smp_ops.smp_init_cpus();
+}
+
+static void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	if (smp_ops.smp_prepare_cpus)
+		smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	if (smp_ops.smp_secondary_init)
+		smp_ops.smp_secondary_init(cpu);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	if (smp_ops.smp_boot_secondary)
+		return smp_ops.smp_boot_secondary(cpu, idle);
+	return -ENOSYS;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static void percpu_timer_stop(void);
 
+static int platform_cpu_kill(unsigned int cpu)
+{
+	if (smp_ops.cpu_kill)
+		return smp_ops.cpu_kill(cpu);
+	return 1;
+}
+
+static void platform_cpu_die(unsigned int cpu)
+{
+	if (smp_ops.cpu_die)
+		smp_ops.cpu_die(cpu);
+}
+
+static int platform_cpu_disable(unsigned int cpu)
+{
+	if (smp_ops.cpu_disable)
+		return smp_ops.cpu_disable(cpu);
+
+	/*
+	 * By default, allow disabling all CPUs except the first one,
+	 * since this is special on a lot of platforms, e.g. because
+	 * of clock tick interrupts.
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpu_disable(void)
+int __cpuinit __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	int ret;
@@ -134,8 +203,11 @@
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
 	 * from the vm mask set of all processes.
+	 *
+	 * Caches are flushed to the Level of Unification Inner Shareable
+	 * to write-back dirty lines to unified caches shared by all CPUs.
 	 */
-	flush_cache_all();
+	flush_cache_louis();
 	local_flush_tlb_all();
 
 	clear_tasks_mm_cpumask(cpu);
@@ -149,7 +221,7 @@
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpu_die(unsigned int cpu)
+void __cpuinit __cpu_die(unsigned int cpu)
 {
 	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
 		pr_err("CPU%u: cpu didn't die\n", cpu);
@@ -222,18 +294,24 @@
 asmlinkage void __cpuinit secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu;
+
+	/*
+	 * The identity mapping is uncached (strongly ordered), so
+	 * switch away from it before attempting any exclusive accesses.
+	 */
+	cpu_switch_mm(mm->pgd, mm);
+	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
 	 */
+	cpu = smp_processor_id();
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
-	cpu_switch_mm(mm->pgd, mm);
-	enter_lazy_tlb(mm, current);
-	local_flush_tlb_all();
 
 	printk("CPU%u: Booted secondary processor\n", cpu);
 
@@ -287,6 +365,8 @@
 	       num_online_cpus(),
 	       bogosum / (500000/HZ),
 	       (bogosum / (5000/HZ)) % 100);
+
+	hyp_mode_check();
 }
 
 void __init smp_prepare_boot_cpu(void)
@@ -347,7 +427,8 @@
 }
 
 static const char *ipi_types[NR_IPI] = {
-#define S(x,s)	[x - IPI_TIMER] = s
+#define S(x,s)	[x] = s
+	S(IPI_WAKEUP, "CPU wakeup interrupts"),
 	S(IPI_TIMER, "Timer broadcast interrupts"),
 	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
 	S(IPI_CALL_FUNC, "Function call interrupts"),
@@ -500,10 +581,13 @@
 	unsigned int cpu = smp_processor_id();
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
-	if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI)
-		__inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]);
+	if (ipinr < NR_IPI)
+		__inc_irq_stat(cpu, ipi_irqs[ipinr]);
 
 	switch (ipinr) {
+	case IPI_WAKEUP:
+		break;
+
 	case IPI_TIMER:
 		irq_enter();
 		ipi_timer();
@@ -584,3 +668,56 @@
 {
 	return -EINVAL;
 }
+
+#ifdef CONFIG_CPU_FREQ
+
+static DEFINE_PER_CPU(unsigned long, l_p_j_ref);
+static DEFINE_PER_CPU(unsigned long, l_p_j_ref_freq);
+static unsigned long global_l_p_j_ref;
+static unsigned long global_l_p_j_ref_freq;
+
+static int cpufreq_callback(struct notifier_block *nb,
+					unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	int cpu = freq->cpu;
+
+	if (freq->flags & CPUFREQ_CONST_LOOPS)
+		return NOTIFY_OK;
+
+	if (!per_cpu(l_p_j_ref, cpu)) {
+		per_cpu(l_p_j_ref, cpu) =
+			per_cpu(cpu_data, cpu).loops_per_jiffy;
+		per_cpu(l_p_j_ref_freq, cpu) = freq->old;
+		if (!global_l_p_j_ref) {
+			global_l_p_j_ref = loops_per_jiffy;
+			global_l_p_j_ref_freq = freq->old;
+		}
+	}
+
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+	    (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
+		loops_per_jiffy = cpufreq_scale(global_l_p_j_ref,
+						global_l_p_j_ref_freq,
+						freq->new);
+		per_cpu(cpu_data, cpu).loops_per_jiffy =
+			cpufreq_scale(per_cpu(l_p_j_ref, cpu),
+					per_cpu(l_p_j_ref_freq, cpu),
+					freq->new);
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_notifier = {
+	.notifier_call  = cpufreq_callback,
+};
+
+static int __init register_cpufreq_notifier(void)
+{
+	return cpufreq_register_notifier(&cpufreq_notifier,
+						CPUFREQ_TRANSITION_NOTIFIER);
+}
+core_initcall(register_cpufreq_notifier);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/smp_twd.c linux-libre-3.7-gnu/arch/arm/kernel/smp_twd.c
--- linux-libre-3.6-gnu/arch/arm/kernel/smp_twd.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/smp_twd.c	2012-12-10 22:30:57.000000000 -0500
@@ -42,10 +42,10 @@
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
+		__raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+			twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* period set, and timer enabled in 'next_event' hook */
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/suspend.c linux-libre-3.7-gnu/arch/arm/kernel/suspend.c
--- linux-libre-3.6-gnu/arch/arm/kernel/suspend.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/suspend.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,8 @@
  */
 void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
 {
+	u32 *ctx = ptr;
+
 	*save_ptr = virt_to_phys(ptr);
 
 	/* This must correspond to the LDM in cpu_resume() assembly */
@@ -26,7 +28,20 @@
 
 	cpu_do_suspend(ptr);
 
-	flush_cache_all();
+	flush_cache_louis();
+
+	/*
+	 * flush_cache_louis does not guarantee that
+	 * save_ptr and ptr are cleaned to main memory,
+	 * just up to the Level of Unification Inner Shareable.
+	 * Since the context pointer and context itself
+	 * are to be retrieved with the MMU off that
+	 * data must be cleaned from all cache levels
+	 * to main memory using "area" cache primitives.
+	*/
+	__cpuc_flush_dcache_area(ctx, ptrsz);
+	__cpuc_flush_dcache_area(save_ptr, sizeof(*save_ptr));
+
 	outer_clean_range(*save_ptr, *save_ptr + ptrsz);
 	outer_clean_range(virt_to_phys(save_ptr),
 			  virt_to_phys(save_ptr) + sizeof(*save_ptr));
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/sys_arm.c linux-libre-3.7-gnu/arch/arm/kernel/sys_arm.c
--- linux-libre-3.6-gnu/arch/arm/kernel/sys_arm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/sys_arm.c	2012-12-10 22:30:57.000000000 -0500
@@ -59,69 +59,6 @@
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL);
 }
 
-/* sys_execve() executes a new program.
- * This is called indirectly via a small wrapper
- */
-asmlinkage int sys_execve(const char __user *filenamei,
-			  const char __user *const __user *argv,
-			  const char __user *const __user *envp, struct pt_regs *regs)
-{
-	int error;
-	char * filename;
-
-	filename = getname(filenamei);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		goto out;
-	error = do_execve(filename, argv, envp, regs);
-	putname(filename);
-out:
-	return error;
-}
-
-int kernel_execve(const char *filename,
-		  const char *const argv[],
-		  const char *const envp[])
-{
-	struct pt_regs regs;
-	int ret;
-
-	memset(&regs, 0, sizeof(struct pt_regs));
-	ret = do_execve(filename,
-			(const char __user *const __user *)argv,
-			(const char __user *const __user *)envp, &regs);
-	if (ret < 0)
-		goto out;
-
-	/*
-	 * Save argc to the register structure for userspace.
-	 */
-	regs.ARM_r0 = ret;
-
-	/*
-	 * We were successful.  We won't be returning to our caller, but
-	 * instead to user space by manipulating the kernel stack.
-	 */
-	asm(	"add	r0, %0, %1\n\t"
-		"mov	r1, %2\n\t"
-		"mov	r2, %3\n\t"
-		"bl	memmove\n\t"	/* copy regs to top of stack */
-		"mov	r8, #0\n\t"	/* not a syscall */
-		"mov	r9, %0\n\t"	/* thread structure */
-		"mov	sp, r0\n\t"	/* reposition stack pointer */
-		"b	ret_to_user"
-		:
-		: "r" (current_thread_info()),
-		  "Ir" (THREAD_START_SP - sizeof(regs)),
-		  "r" (&regs),
-		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
-
- out:
-	return ret;
-}
-EXPORT_SYMBOL(kernel_execve);
-
 /*
  * Since loff_t is a 64 bit type we avoid a lot of ABI hassle
  * with a different argument ordering.
diff -druN linux-libre-3.6-gnu/arch/arm/kernel/time.c linux-libre-3.7-gnu/arch/arm/kernel/time.c
--- linux-libre-3.6-gnu/arch/arm/kernel/time.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/kernel/time.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,6 @@
 #include <linux/timer.h>
 #include <linux/irq.h>
 
-#include <asm/leds.h>
 #include <asm/thread_info.h>
 #include <asm/sched_clock.h>
 #include <asm/stacktrace.h>
@@ -80,21 +79,6 @@
 }
 #endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
-	static unsigned int count = HZ/2;
-
-	if (--count == 0) {
-		count = HZ/2;
-		leds_event(led_timer);
-	}
-}
-#else
-#define	do_leds()
-#endif
-
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
@@ -102,7 +86,6 @@
 void timer_tick(void)
 {
 	profile_tick(CPU_PROFILING);
-	do_leds();
 	xtime_update(1);
 #ifndef CONFIG_SMP
 	update_process_times(user_mode(get_irq_regs()));
diff -druN linux-libre-3.6-gnu/arch/arm/lib/delay.c linux-libre-3.7-gnu/arch/arm/lib/delay.c
--- linux-libre-3.6-gnu/arch/arm/lib/delay.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/lib/delay.c	2012-12-10 22:30:57.000000000 -0500
@@ -34,7 +34,19 @@
 	.udelay		= __loop_udelay,
 };
 
-#ifdef ARCH_HAS_READ_CURRENT_TIMER
+static const struct delay_timer *delay_timer;
+static bool delay_calibrated;
+
+int read_current_timer(unsigned long *timer_val)
+{
+	if (!delay_timer)
+		return -ENXIO;
+
+	*timer_val = delay_timer->read_current_timer();
+	return 0;
+}
+EXPORT_SYMBOL_GPL(read_current_timer);
+
 static void __timer_delay(unsigned long cycles)
 {
 	cycles_t start = get_cycles();
@@ -55,18 +67,24 @@
 	__timer_const_udelay(usecs * UDELAY_MULT);
 }
 
-void __init init_current_timer_delay(unsigned long freq)
+void __init register_current_timer_delay(const struct delay_timer *timer)
 {
-	pr_info("Switching to timer-based delay loop\n");
-	lpj_fine			= freq / HZ;
-	loops_per_jiffy			= lpj_fine;
-	arm_delay_ops.delay		= __timer_delay;
-	arm_delay_ops.const_udelay	= __timer_const_udelay;
-	arm_delay_ops.udelay		= __timer_udelay;
+	if (!delay_calibrated) {
+		pr_info("Switching to timer-based delay loop\n");
+		delay_timer			= timer;
+		lpj_fine			= timer->freq / HZ;
+		loops_per_jiffy			= lpj_fine;
+		arm_delay_ops.delay		= __timer_delay;
+		arm_delay_ops.const_udelay	= __timer_const_udelay;
+		arm_delay_ops.udelay		= __timer_udelay;
+		delay_calibrated		= true;
+	} else {
+		pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
+	}
 }
 
 unsigned long __cpuinit calibrate_delay_is_known(void)
 {
+	delay_calibrated = true;
 	return lpj_fine;
 }
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91rm9200.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91rm9200.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91rm9200.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91rm9200.c	2012-12-10 22:30:57.000000000 -0500
@@ -187,6 +187,7 @@
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91rm9200_devices.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91rm9200_devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91rm9200_devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91rm9200_devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -68,7 +68,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -294,9 +294,9 @@
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -312,7 +312,7 @@
 };
 
 static struct platform_device at91rm9200_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -323,53 +323,69 @@
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA27, 0);
+		if (!data->slot[i].bus_width)
+			continue;
 
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA8, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin, 1);
+			at91_set_deglitch(data->slot[i].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
 
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA9, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA10, 1);
-			at91_set_B_periph(AT91_PIN_PA11, 1);
-			at91_set_B_periph(AT91_PIN_PA12, 1);
+		switch (i) {
+		case 0:					/* slot A */
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA28, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA29, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PB3, 1);
+				at91_set_B_periph(AT91_PIN_PB4, 1);
+				at91_set_B_periph(AT91_PIN_PB5, 1);
+			}
+			slot_count++;
+			break;
+		case 1:					/* slot B */
+			/* CMD */
+			at91_set_B_periph(AT91_PIN_PA8, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_B_periph(AT91_PIN_PA9, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PA10, 1);
+				at91_set_B_periph(AT91_PIN_PA11, 1);
+				at91_set_B_periph(AT91_PIN_PA12, 1);
+			}
+			slot_count++;
+			break;
+		default:
+			printk(KERN_ERR
+			       "AT91: SD/MMC slot %d not available\n", i);
+			break;
 		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA28, 1);
+		if (slot_count) {
+			/* CLK */
+			at91_set_A_periph(AT91_PIN_PA27, 0);
 
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA29, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PB3, 1);
-			at91_set_B_periph(AT91_PIN_PB4, 1);
-			at91_set_B_periph(AT91_PIN_PB5, 1);
+			mmc_data = *data;
+			platform_device_register(&at91rm9200_mmc_device);
 		}
 	}
 
-	mmc_data = *data;
-	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
@@ -463,7 +479,7 @@
 
 static struct platform_device at91rm9200_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -495,8 +511,8 @@
 };
 
 static struct platform_device at91rm9200_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
+	.name		= "i2c-at91rm9200",
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9260.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9260.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9260.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9260.c	2012-12-10 22:30:57.000000000 -0500
@@ -211,6 +211,8 @@
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
 	/* more usart lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
 	CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
@@ -219,6 +221,7 @@
 	CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
 	CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
 	/* more tc lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9260_devices.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9260_devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9260_devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9260_devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -72,7 +72,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -209,92 +209,10 @@
 
 
 /* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_MCI,
-		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
-		.end	= NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA5, 1);
-			at91_set_B_periph(AT91_PIN_PA4, 1);
-			at91_set_B_periph(AT91_PIN_PA3, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA7, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA6, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA9, 1);
-			at91_set_A_periph(AT91_PIN_PA10, 1);
-			at91_set_A_periph(AT91_PIN_PA11, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
  *  MMC / SD Slot for Atmel MCI Driver
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 static struct mci_platform_data mmc_data;
 
@@ -471,7 +389,7 @@
 
 static struct platform_device at91sam9260_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -503,14 +421,20 @@
 };
 
 static struct platform_device at91sam9260_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
+	/* IP version is not the same on 9260 and g20 */
+	if (cpu_is_at91sam9g20()) {
+		at91sam9260_twi_device.name = "i2c-at91sam9g20";
+	} else {
+		at91sam9260_twi_device.name = "i2c-at91sam9260";
+	}
+
 	/* pins used for TWI interface */
 	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
 	at91_set_multi_drive(AT91_PIN_PA23, 1);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9261.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9261.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9261.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9261.c	2012-12-10 22:30:57.000000000 -0500
@@ -178,6 +178,8 @@
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9261_devices.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9261_devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9261_devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9261_devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -72,7 +72,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -137,9 +137,9 @@
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@
 };
 
 static struct platform_device at91sam9261_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -166,40 +166,40 @@
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
 
-	/* CLK */
-	at91_set_B_periph(AT91_PIN_PA2, 0);
+		/* CLK */
+		at91_set_B_periph(AT91_PIN_PA2, 0);
 
-	/* CMD */
-	at91_set_B_periph(AT91_PIN_PA1, 1);
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA1, 1);
 
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_B_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_B_periph(AT91_PIN_PA4, 1);
-		at91_set_B_periph(AT91_PIN_PA5, 1);
-		at91_set_B_periph(AT91_PIN_PA6, 1);
-	}
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+			at91_set_B_periph(AT91_PIN_PA5, 1);
+			at91_set_B_periph(AT91_PIN_PA6, 1);
+		}
 
-	mmc_data = *data;
-	platform_device_register(&at91sam9261_mmc_device);
+		mmc_data = *data;
+		platform_device_register(&at91sam9261_mmc_device);
+	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
@@ -285,7 +285,7 @@
 
 static struct platform_device at91sam9261_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -317,20 +317,26 @@
 };
 
 static struct platform_device at91sam9261_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
+	/* IP version is not the same on 9261 and g10 */
+	if (cpu_is_at91sam9g10()) {
+		at91sam9261_twi_device.name = "i2c-at91sam9g10";
+		/* I2C PIO must not be configured as open-drain on this chip */
+	} else {
+		at91sam9261_twi_device.name = "i2c-at91sam9261";
+		at91_set_multi_drive(AT91_PIN_PA7, 1);
+		at91_set_multi_drive(AT91_PIN_PA8, 1);
+	}
+
 	/* pins used for TWI interface */
 	at91_set_A_periph(AT91_PIN_PA7, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA7, 1);
-
 	at91_set_A_periph(AT91_PIN_PA8, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA8, 1);
 
 	i2c_register_board_info(0, devices, nr_devices);
 	platform_device_register(&at91sam9261_twi_device);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9263.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9263.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9263.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9263.c	2012-12-10 22:30:57.000000000 -0500
@@ -188,11 +188,12 @@
 	CLKDEV_CON_ID("hclk", &macb_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
@@ -210,6 +211,7 @@
 	CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9263_devices.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9263_devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9263_devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9263_devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -78,7 +78,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -218,9 +218,9 @@
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
+static struct mci_platform_data mmc0_data, mmc1_data;
 
 static struct resource mmc0_resources[] = {
 	[0] = {
@@ -236,7 +236,7 @@
 };
 
 static struct platform_device at91sam9263_mmc0_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -261,7 +261,7 @@
 };
 
 static struct platform_device at91sam9263_mmc1_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -272,85 +272,110 @@
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	if (mmc_id == 0) {		/* MCI0 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA12, 0);
+		if (!data->slot[i].bus_width)
+			continue;
 
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA16, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin,
+					1);
+			at91_set_deglitch(data->slot[i].detect_pin,
+					1);
+		}
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
 
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA17, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA18, 1);
-				at91_set_A_periph(AT91_PIN_PA19, 1);
-				at91_set_A_periph(AT91_PIN_PA20, 1);
+		if (mmc_id == 0) {				/* MCI0 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA1, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA0, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA3, 1);
+					at91_set_A_periph(AT91_PIN_PA4, 1);
+					at91_set_A_periph(AT91_PIN_PA5, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA16, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA17, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA18, 1);
+					at91_set_A_periph(AT91_PIN_PA19, 1);
+					at91_set_A_periph(AT91_PIN_PA20, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
 			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA1, 1);
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA12, 0);
 
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA0, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA3, 1);
-				at91_set_A_periph(AT91_PIN_PA4, 1);
-				at91_set_A_periph(AT91_PIN_PA5, 1);
+				mmc0_data = *data;
+				platform_device_register(&at91sam9263_mmc0_device);
 			}
-		}
-
-		mmc0_data = *data;
-		platform_device_register(&at91sam9263_mmc0_device);
-	} else {			/* MCI1 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA6, 0);
-
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA21, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA22, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA23, 1);
-				at91_set_A_periph(AT91_PIN_PA24, 1);
-				at91_set_A_periph(AT91_PIN_PA25, 1);
+		} else if (mmc_id == 1) {			/* MCI1 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA8, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA9, 1);
+					at91_set_A_periph(AT91_PIN_PA10, 1);
+					at91_set_A_periph(AT91_PIN_PA11, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA21, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA22, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA23, 1);
+					at91_set_A_periph(AT91_PIN_PA24, 1);
+					at91_set_A_periph(AT91_PIN_PA25, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
 			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA7, 1);
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA6, 0);
 
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA8, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-				at91_set_A_periph(AT91_PIN_PA10, 1);
-				at91_set_A_periph(AT91_PIN_PA11, 1);
+				mmc1_data = *data;
+				platform_device_register(&at91sam9263_mmc1_device);
 			}
 		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9263_mmc1_device);
 	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------
@@ -542,7 +567,7 @@
 
 static struct platform_device at91sam9263_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -574,8 +599,8 @@
 };
 
 static struct platform_device at91sam9263_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
+	.name		= "i2c-at91sam9260",
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9g45.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9g45.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9g45.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9g45.c	2012-12-10 22:30:57.000000000 -0500
@@ -237,6 +237,8 @@
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
@@ -254,6 +256,8 @@
 	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9g45_devices.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9g45_devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9g45_devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9g45_devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,7 +31,7 @@
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 #include <mach/atmel-mci.h>
 
 #include <media/atmel-isi.h>
@@ -653,7 +653,7 @@
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
-	.name		= "at91_i2c",
+	.name		= "i2c-at91sam9g10",
 	.id		= 0,
 	.resource	= twi0_resources,
 	.num_resources	= ARRAY_SIZE(twi0_resources),
@@ -673,7 +673,7 @@
 };
 
 static struct platform_device at91sam9g45_twi1_device = {
-	.name		= "at91_i2c",
+	.name		= "i2c-at91sam9g10",
 	.id		= 1,
 	.resource	= twi1_resources,
 	.num_resources	= ARRAY_SIZE(twi1_resources),
@@ -686,18 +686,12 @@
 	/* pins used for TWI interface */
 	if (i2c_id == 0) {
 		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
-		at91_set_multi_drive(AT91_PIN_PA20, 1);
-
 		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
-		at91_set_multi_drive(AT91_PIN_PA21, 1);
 
 		platform_device_register(&at91sam9g45_twi0_device);
 	} else {
 		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
-		at91_set_multi_drive(AT91_PIN_PB10, 1);
-
 		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
-		at91_set_multi_drive(AT91_PIN_PB11, 1);
 
 		platform_device_register(&at91sam9g45_twi1_device);
 	}
@@ -1847,8 +1841,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1880,8 +1874,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1916,8 +1910,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9n12.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9n12.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9n12.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9n12.c	2012-12-10 22:30:57.000000000 -0500
@@ -169,6 +169,8 @@
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
 	CLKDEV_CON_ID("pioA", &pioAB_clk),
 	CLKDEV_CON_ID("pioB", &pioAB_clk),
 	CLKDEV_CON_ID("pioC", &pioCD_clk),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9rl.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9rl.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9rl.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9rl.c	2012-12-10 22:30:57.000000000 -0500
@@ -186,6 +186,8 @@
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9rl_devices.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9rl_devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9rl_devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9rl_devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,7 +22,7 @@
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 
 #include "generic.h"
 
@@ -161,9 +161,9 @@
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -179,7 +179,7 @@
 };
 
 static struct platform_device at91sam9rl_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -190,40 +190,40 @@
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
 
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA2, 0);
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA2, 0);
 
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PA1, 1);
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA1, 1);
 
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_A_periph(AT91_PIN_PA3, 1);
-		at91_set_A_periph(AT91_PIN_PA4, 1);
-		at91_set_A_periph(AT91_PIN_PA5, 1);
-	}
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA3, 1);
+			at91_set_A_periph(AT91_PIN_PA4, 1);
+			at91_set_A_periph(AT91_PIN_PA5, 1);
+		}
 
-	mmc_data = *data;
-	platform_device_register(&at91sam9rl_mmc_device);
+		mmc_data = *data;
+		platform_device_register(&at91sam9rl_mmc_device);
+	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
@@ -314,7 +314,7 @@
 
 static struct platform_device at91sam9rl_twi_device = {
 	.name			= "i2c-gpio",
-	.id			= -1,
+	.id			= 0,
 	.dev.platform_data	= &pdata,
 };
 
@@ -346,8 +346,8 @@
 };
 
 static struct platform_device at91sam9rl_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
+	.name		= "i2c-at91sam9g20",
+	.id		= 0,
 	.resource	= twi_resources,
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9x5.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9x5.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91sam9x5.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91sam9x5.c	2012-12-10 22:30:57.000000000 -0500
@@ -231,6 +231,9 @@
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),
 	CLKDEV_CON_ID("pioA", &pioAB_clk),
 	CLKDEV_CON_ID("pioB", &pioAB_clk),
 	CLKDEV_CON_ID("pioC", &pioCD_clk),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91x40.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91x40.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91x40.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91x40.c	2012-12-10 22:30:57.000000000 -0500
@@ -47,7 +47,7 @@
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-	__raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
+	__raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
 	cpu_do_idle();
 }
 
@@ -88,6 +88,6 @@
 	if (!priority)
 		priority = at91x40_default_irq_priority;
 
-	at91_aic_init(priority);
+	at91_aic_init(priority, at91_extern_irq);
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/at91x40_time.c linux-libre-3.7-gnu/arch/arm/mach-at91/at91x40_time.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/at91x40_time.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/at91x40_time.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,10 +29,10 @@
 #include <mach/at91_tc.h>
 
 #define at91_tc_read(field) \
-	__raw_readl(AT91_TC + field)
+	__raw_readl(AT91_IO_P2V(AT91_TC) + field)
 
 #define at91_tc_write(field, value) \
-	__raw_writel(value, AT91_TC + field);
+	__raw_writel(value, AT91_IO_P2V(AT91_TC) + field);
 
 /*
  *	3 counter/timer units present.
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-afeb-9260v1.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-afeb-9260v1.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-afeb-9260v1.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-afeb-9260v1.c	2012-12-10 22:30:57.000000000 -0500
@@ -133,12 +133,12 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
-	.det_pin 	= AT91_PIN_PC9,
-	.wp_pin 	= AT91_PIN_PC4,
-	.slot_b		= 1,
-	.wire4		= 1,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata afeb9260_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 
@@ -199,7 +199,7 @@
 	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
 	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
 	/* MMC */
-	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	at91_add_device_mci(0, &afeb9260_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-carmeva.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-carmeva.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-carmeva.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-carmeva.c	2012-12-10 22:30:57.000000000 -0500
@@ -71,12 +71,12 @@
 	// .vcc_pin	= -EINVAL,
 // };
 
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB10,
-	.wp_pin		= AT91_PIN_PC14,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata carmeva_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB10,
+		.wp_pin		= AT91_PIN_PC14,
+	},
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {
@@ -150,7 +150,7 @@
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(0, &carmeva_mmc_data);
+	at91_add_device_mci(0, &carmeva_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-cpu9krea.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-cpu9krea.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-cpu9krea.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-cpu9krea.c	2012-12-10 22:30:57.000000000 -0500
@@ -254,8 +254,7 @@
 
 static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0x68),
-		.type	= "ds1339",
+		I2C_BOARD_INFO("ds1339", 0x68),
 	},
 };
 
@@ -312,12 +311,12 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA29,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpu9krea_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA29,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static void __init cpu9krea_board_init(void)
@@ -359,7 +358,7 @@
 	/* Ethernet */
 	at91_add_device_eth(&cpu9krea_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	at91_add_device_mci(0, &cpu9krea_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(cpu9krea_i2c_devices,
 		ARRAY_SIZE(cpu9krea_i2c_devices));
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-cpuat91.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-cpuat91.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-cpuat91.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-cpuat91.c	2012-12-10 22:30:57.000000000 -0500
@@ -78,11 +78,12 @@
 	.pullup_pin	= AT91_PIN_PC14,
 };
 
-static struct at91_mmc_data __initdata cpuat91_mmc_data = {
-	.det_pin	= AT91_PIN_PC2,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpuat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {
@@ -168,7 +169,7 @@
 	/* USB Device */
 	at91_add_device_udc(&cpuat91_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	at91_add_device_mci(0, &cpuat91_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Platform devices */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-csb337.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-csb337.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-csb337.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-csb337.c	2012-12-10 22:30:57.000000000 -0500
@@ -87,12 +87,12 @@
 	.rst_pin	= AT91_PIN_PD2,
 };
 
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata csb337_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PD5,
+		.wp_pin		= AT91_PIN_PD6,
+	},
 };
 
 static struct spi_board_info csb337_spi_devices[] = {
@@ -220,8 +220,6 @@
 
 static void __init csb337_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* Serial */
 	/* DBGU on ttyS0 */
 	at91_register_uart(0, 0, 0);
@@ -240,7 +238,7 @@
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &csb337_mmc_data);
+	at91_add_device_mci(0, &csb337_mci0_data);
 	/* NOR flash */
 	platform_device_register(&csb_flash);
 	/* LEDs */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-eb9200.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-eb9200.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-eb9200.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-eb9200.c	2012-12-10 22:30:57.000000000 -0500
@@ -70,12 +70,12 @@
 	.rst_pin	= AT91_PIN_PC5,
 };
 
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eb9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
@@ -113,7 +113,7 @@
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(0, &eb9200_mmc_data);
+	at91_add_device_mci(0, &eb9200_mci0_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-ecbat91.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-ecbat91.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-ecbat91.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-ecbat91.c	2012-12-10 22:30:57.000000000 -0500
@@ -64,12 +64,12 @@
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ecbat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -138,11 +138,20 @@
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
 static void __init ecb_at91board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -161,10 +170,13 @@
 	at91_add_device_i2c(NULL, 0);
 
 	/* MMC */
-	at91_add_device_mmc(0, &ecb_at91mmc_data);
+	at91_add_device_mci(0, &ecbat91_mci0_data);
 
 	/* SPI */
 	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+	/* LEDs */
+	at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
 }
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-eco920.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-eco920.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-eco920.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-eco920.c	2012-12-10 22:30:57.000000000 -0500
@@ -56,12 +56,12 @@
 	.pullup_pin	= AT91_PIN_PB13,
 };
 
-static struct at91_mmc_data __initdata eco920_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 0,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eco920_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 1,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data eco920_flash_data = {
@@ -93,10 +93,26 @@
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+	{       /* D1 */
+		.name                   = "led1",
+		.gpio                   = AT91_PIN_PB0,
+		.active_low             = 1,
+		.default_trigger        = "heartbeat",
+	},
+	{       /* D2 */
+		.name                   = "led2",
+		.gpio                   = AT91_PIN_PB1,
+		.active_low             = 1,
+		.default_trigger        = "timer",
+	}
+};
+
 static void __init eco920_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* DBGU on ttyS0. (Rx & Tx only */
 	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
@@ -104,7 +120,7 @@
 	at91_add_device_usbh(&eco920_usbh_data);
 	at91_add_device_udc(&eco920_udc_data);
 
-	at91_add_device_mmc(0, &eco920_mmc_data);
+	at91_add_device_mci(0, &eco920_mci0_data);
 	platform_device_register(&eco920_flash);
 
 	at91_ramc_write(0, AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
@@ -127,6 +143,8 @@
 	);
 
 	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+	/* LEDs */
+	at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
 }
 
 MACHINE_START(ECO920, "eco920")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-flexibity.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-flexibity.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-flexibity.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-flexibity.c	2012-12-10 22:30:57.000000000 -0500
@@ -75,12 +75,12 @@
 };
 
 /* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata flexibity_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 /* LEDs */
@@ -152,7 +152,7 @@
 	at91_add_device_spi(flexibity_spi_devices,
 		ARRAY_SIZE(flexibity_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &flexibity_mmc_data);
+	at91_add_device_mci(0, &flexibity_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-foxg20.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-foxg20.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-foxg20.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-foxg20.c	2012-12-10 22:30:57.000000000 -0500
@@ -86,7 +86,7 @@
  * SPI devices.
  */
 static struct spi_board_info foxg20_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -109,12 +109,12 @@
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata foxg20_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata foxg20_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -247,7 +247,7 @@
 	/* Ethernet */
 	at91_add_device_eth(&foxg20_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &foxg20_mmc_data);
+	at91_add_device_mci(0, &foxg20_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
 	/* LEDs */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-kafa.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-kafa.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-kafa.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-kafa.c	2012-12-10 22:30:57.000000000 -0500
@@ -66,11 +66,20 @@
 	.pullup_pin	= AT91_PIN_PB7,
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB4,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
 static void __init kafa_board_init(void)
 {
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -88,6 +97,8 @@
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
 }
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-kb9202.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-kb9202.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-kb9202.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-kb9202.c	2012-12-10 22:30:57.000000000 -0500
@@ -69,12 +69,12 @@
 	.pullup_pin	= AT91_PIN_PB22,
 };
 
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-	.det_pin	= AT91_PIN_PB2,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata kb9202_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -96,11 +96,26 @@
 	.num_parts	= ARRAY_SIZE(kb9202_nand_partition),
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC19,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PC18,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
+};
+
 static void __init kb9202_board_init(void)
 {
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -121,13 +136,15 @@
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &kb9202_mmc_data);
+	at91_add_device_mci(0, &kb9202_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
 	/* NAND */
 	at91_add_device_nand(&kb9202_nand_data);
+	/* LEDs */
+	at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
 }
 
 MACHINE_START(KB9200, "KB920x")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-neocore926.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-neocore926.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-neocore926.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-neocore926.c	2012-12-10 22:30:57.000000000 -0500
@@ -129,7 +129,7 @@
 		.max_speed_hz	= 125000 * 16,
 		.bus_num	= 0,
 		.platform_data	= &ads_info,
-		.irq		= AT91SAM9263_ID_IRQ1,
+		.irq		= NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
 	},
 #endif
 };
@@ -138,11 +138,12 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata neocore926_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata neocore926_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -354,7 +355,7 @@
 	neocore926_add_device_ts();
 
 	/* MMC */
-	at91_add_device_mmc(1, &neocore926_mmc_data);
+	at91_add_device_mci(0, &neocore926_mci0_data);
 
 	/* Ethernet */
 	at91_add_device_eth(&neocore926_macb_data);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-picotux200.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-picotux200.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-picotux200.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-picotux200.c	2012-12-10 22:30:57.000000000 -0500
@@ -62,12 +62,12 @@
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata picotux200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	},
 };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
@@ -112,7 +112,7 @@
 	at91_add_device_i2c(NULL, 0);
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &picotux200_mmc_data);
+	at91_add_device_mci(0, &picotux200_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-qil-a9260.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-qil-a9260.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-qil-a9260.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-qil-a9260.c	2012-12-10 22:30:57.000000000 -0500
@@ -156,12 +156,12 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -245,7 +245,7 @@
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* LEDs */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-rm9200dk.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-rm9200dk.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-rm9200dk.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-rm9200dk.c	2012-12-10 22:30:57.000000000 -0500
@@ -77,12 +77,12 @@
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata dk_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata dk_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 #endif
 
@@ -177,9 +177,6 @@
 
 static void __init dk_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -208,7 +205,7 @@
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &dk_mmc_data);
+	at91_add_device_mci(0, &dk_mci0_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-rm9200ek.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-rm9200ek.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-rm9200ek.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-rm9200ek.c	2012-12-10 22:30:57.000000000 -0500
@@ -70,12 +70,12 @@
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	}
 };
 #endif
 
@@ -148,9 +148,6 @@
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -177,7 +174,7 @@
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-rsi-ews.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-rsi-ews.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-rsi-ews.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-rsi-ews.c	2012-12-10 22:30:57.000000000 -0500
@@ -58,11 +58,12 @@
 /*
  * SD/MC
  */
-static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB27,
-	.wp_pin		= AT91_PIN_PB29,
+static struct mci_platform_data __initdata rsi_ews_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PB29,
+	},
 };
 
 /*
@@ -185,9 +186,6 @@
  */
 static void __init rsi_ews_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	/* This one is for debugging */
@@ -215,7 +213,7 @@
 	at91_add_device_spi(rsi_ews_spi_devices,
 			ARRAY_SIZE(rsi_ews_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &rsi_ews_mmc_data);
+	at91_add_device_mci(0, &rsi_ews_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&rsiews_nor_flash);
 	/* LEDs */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9260ek.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9260ek.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9260ek.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9260ek.c	2012-12-10 22:30:57.000000000 -0500
@@ -108,7 +108,7 @@
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -211,12 +211,12 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -329,7 +329,7 @@
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SSC (to AT73C213) */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9261ek.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9261ek.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9261ek.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9261ek.c	2012-12-10 22:30:57.000000000 -0500
@@ -309,7 +309,7 @@
 		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
 		.bus_num	= 0,
 		.platform_data	= &ads_info,
-		.irq		= AT91SAM9261_ID_IRQ0,
+		.irq		= NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
 		.controller_data = (void *) AT91_PIN_PA28,	/* CS pin */
 	},
 #endif
@@ -340,11 +340,12 @@
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */
@@ -569,9 +570,6 @@
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -598,7 +596,7 @@
 	at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
 #else
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 #endif
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9263ek.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9263ek.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9263ek.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9263ek.c	2012-12-10 22:30:57.000000000 -0500
@@ -132,7 +132,7 @@
 		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
 		.bus_num	= 0,
 		.platform_data	= &ads_info,
-		.irq		= AT91SAM9263_ID_IRQ1,
+		.irq		= NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
 	},
 #endif
 };
@@ -141,11 +141,12 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci1_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -420,7 +421,7 @@
 	/* Touchscreen */
 	ek_add_device_ts();
 	/* MMC */
-	at91_add_device_mmc(1, &ek_mmc_data);
+	at91_add_device_mci(1, &mci1_data);
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9g20ek.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9g20ek.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9g20ek.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9g20ek.c	2012-12-10 22:30:57.000000000 -0500
@@ -92,7 +92,7 @@
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -199,7 +199,6 @@
  * MCI (SD/MMC)
  * wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
 	.slot[1] = {
 		.bus_width	= 4,
@@ -208,28 +207,15 @@
 	},
 
 };
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,	/* Only one slot so use slot B */
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 static void __init ek_add_device_mmc(void)
 {
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	if (ek_have_2mmc()) {
 		ek_mmc_data.slot[0].bus_width = 4;
 		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
 		ek_mmc_data.slot[0].wp_pin = -1;
 	}
 	at91_add_device_mci(0, &ek_mmc_data);
-#else
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
 }
 
 /*
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9-l9260.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9-l9260.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9-l9260.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9-l9260.c	2012-12-10 22:30:57.000000000 -0500
@@ -73,7 +73,7 @@
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -158,19 +158,34 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC8,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC8,
+		.wp_pin		= AT91_PIN_PC4,
+	},
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PA9,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PA6,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
 };
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -194,9 +209,11 @@
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9rlek.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9rlek.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-sam9rlek.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-sam9rlek.c	2012-12-10 22:30:57.000000000 -0500
@@ -56,11 +56,12 @@
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA15,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA15,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -303,7 +304,7 @@
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* AC97 */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-stamp9g20.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-stamp9g20.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-stamp9g20.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-stamp9g20.c	2012-12-10 22:30:57.000000000 -0500
@@ -83,7 +83,6 @@
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata mmc_data = {
 	.slot[0] = {
 		.bus_width	= 4,
@@ -91,15 +90,6 @@
 		.wp_pin		= -1,
 	},
 };
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 
 /*
@@ -223,11 +213,7 @@
 	/* NAND */
 	add_device_nand();
 	/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
 	/* W1 */
 	add_w1();
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-usb-a926x.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-usb-a926x.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-usb-a926x.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-usb-a926x.c	2012-12-10 22:30:57.000000000 -0500
@@ -109,14 +109,12 @@
  * SPI devices.
  */
 static struct spi_board_info usb_a9263_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 0,
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	}
-#endif
 };
 
 static struct spi_board_info usb_a9g20_spi_devices[] = {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/board-yl-9200.c linux-libre-3.7-gnu/arch/arm/mach-at91/board-yl-9200.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/board-yl-9200.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/board-yl-9200.c	2012-12-10 22:30:57.000000000 -0500
@@ -119,11 +119,12 @@
 /*
  * MMC
  */
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
-	.det_pin	= AT91_PIN_PB9,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata yl9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB9,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -541,9 +542,6 @@
 
 static void __init yl9200_board_init(void)
 {
-	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -568,7 +566,7 @@
 	/* I2C */
 	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &yl9200_mmc_data);
+	at91_add_device_mci(0, &yl9200_mci0_data);
 	/* NAND */
 	at91_add_device_nand(&yl9200_nand_data);
 	/* NOR Flash */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/clock.c linux-libre-3.7-gnu/arch/arm/mach-at91/clock.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/clock.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/clock.c	2012-12-10 22:30:57.000000000 -0500
@@ -625,7 +625,7 @@
 	return 0;
 }
 
-static struct clk *const standard_pmc_clocks[] __initdata = {
+static struct clk *const standard_pmc_clocks[] __initconst = {
 	/* four primary clocks */
 	&clk32k,
 	&main_clk,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/generic.h linux-libre-3.7-gnu/arch/arm/mach-at91/generic.h
--- linux-libre-3.6-gnu/arch/arm/mach-at91/generic.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/generic.h	2012-12-10 22:30:57.000000000 -0500
@@ -26,7 +26,8 @@
 extern void __init at91_init_irq_default(void);
 extern void __init at91_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
+extern void __init at91_aic_init(unsigned int priority[],
+				 unsigned int ext_irq_mask);
 extern int  __init at91_aic_of_init(struct device_node *node,
 				    struct device_node *parent);
 extern int  __init at91_aic5_of_init(struct device_node *node,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/at91_twi.h linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/at91_twi.h
--- linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/at91_twi.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/at91_twi.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define	AT91_TWI_CR		0x00		/* Control Register */
-#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
-#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
-#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
-#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
-#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
-#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
-#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
-#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
-#define			AT91_TWI_IADRSZ_NO		(0 << 8)
-#define			AT91_TWI_IADRSZ_1		(1 << 8)
-#define			AT91_TWI_IADRSZ_2		(2 << 8)
-#define			AT91_TWI_IADRSZ_3		(3 << 8)
-#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
-#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
-
-#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
-#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
-
-#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
-
-#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
-#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
-#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
-#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
-
-#define	AT91_TWI_SR		0x20		/* Status Register */
-#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
-#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
-#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
-#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
-#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
-#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
-#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
-#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
-#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
-#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
-#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
-#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
-
-#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
-#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
-#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
-#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
-#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
-
-#endif
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/at_hdmac.h linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/at_hdmac.h
--- linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/at_hdmac.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/at_hdmac.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,61 +0,0 @@
-/*
- * Header file for the Atmel AHB DMA Controller driver
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef AT_HDMAC_H
-#define AT_HDMAC_H
-
-#include <linux/dmaengine.h>
-
-/**
- * struct at_dma_platform_data - Controller configuration parameters
- * @nr_channels: Number of channels supported by hardware (max 8)
- * @cap_mask: dma_capability flags supported by the platform
- */
-struct at_dma_platform_data {
-	unsigned int	nr_channels;
-	dma_cap_mask_t  cap_mask;
-};
-
-/**
- * struct at_dma_slave - Controller-specific information about a slave
- * @dma_dev: required DMA master device
- * @cfg: Platform-specific initializer for the CFG register
- */
-struct at_dma_slave {
-	struct device		*dma_dev;
-	u32			cfg;
-};
-
-
-/* Platform-configurable bits in CFG */
-#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
-#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
-#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
-#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
-#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
-#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
-#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
-#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
-#define		ATC_DST_H2SEL_SW	(0x0 << 13)
-#define		ATC_DST_H2SEL_HW	(0x1 << 13)
-#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
-#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
-#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
-#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
-#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
-#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
-#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
-#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
-#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
-#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
-#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
-
-
-#endif /* AT_HDMAC_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/atmel-mci.h linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/atmel-mci.h
--- linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/atmel-mci.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/atmel-mci.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,7 +1,7 @@
 #ifndef __MACH_ATMEL_MCI_H
 #define __MACH_ATMEL_MCI_H
 
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 
 /**
  * struct mci_dma_data - DMA data for MCI interface
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/board.h linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/board.h
--- linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/board.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/board.h	2012-12-10 22:30:57.000000000 -0500
@@ -187,7 +187,6 @@
 extern void __init at91_add_device_can(struct at91_can_data *data);
 
  /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/hardware.h linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/hardware.h
--- linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/hardware.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/hardware.h	2012-12-10 22:30:57.000000000 -0500
@@ -67,13 +67,13 @@
  * to 0xFEF78000 .. 0xFF000000.  (544Kb)
  */
 #define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+#define AT91_IO_VIRT_BASE	IOMEM(0xFF000000 - AT91_IO_SIZE)
 #else
 /*
  * Identity mapping for the non MMU case.
  */
 #define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
+#define AT91_IO_VIRT_BASE	IOMEM(AT91_IO_PHYS_BASE)
 #endif
 
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/uncompress.h linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/uncompress.h
--- linux-libre-3.6-gnu/arch/arm/mach-at91/include/mach/uncompress.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/include/mach/uncompress.h	2012-12-10 22:30:57.000000000 -0500
@@ -94,7 +94,7 @@
 	0,
 };
 
-static inline const u32* decomp_soc_detect(u32 dbgu_base)
+static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
 
@@ -142,10 +142,10 @@
 	int i = 0;
 	const u32* usarts;
 
-	usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+	usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
 
 	if (!usarts)
-		usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
 	if (!usarts) {
 		at91_uart = NULL;
 		return;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/irq.c linux-libre-3.7-gnu/arch/arm/mach-at91/irq.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/irq.c	2012-12-10 22:30:57.000000000 -0500
@@ -502,14 +502,19 @@
 /*
  * Initialize the AIC interrupt controller.
  */
-void __init at91_aic_init(unsigned int *priority)
+void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
 {
 	unsigned int i;
 	int irq_base;
 
-	if (at91_aic_pm_init())
+	at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
+				  * sizeof(*at91_extern_irq), GFP_KERNEL);
+
+	if (at91_aic_pm_init() || at91_extern_irq == NULL)
 		panic("Unable to allocate bit maps\n");
 
+	*at91_extern_irq = ext_irq_mask;
+
 	at91_aic_base = ioremap(AT91_AIC, 512);
 	if (!at91_aic_base)
 		panic("Unable to ioremap AIC registers\n");
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/Kconfig linux-libre-3.7-gnu/arch/arm/mach-at91/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-at91/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -19,75 +19,69 @@
 
 config SOC_AT91SAM9
 	bool
-	select GENERIC_CLOCKEVENTS
 	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 
 menu "Atmel AT91 System-on-Chip"
 
 comment "Atmel AT91 Processor"
 
-config SOC_AT91SAM9
-	bool
-	select CPU_ARM926T
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select AT91_SAM9_TIME
-	select AT91_SAM9_SMC
-
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
 	  or AT91SAM9G20 SoC.
 
 config SOC_AT91SAM9261
 	bool "AT91SAM9261 or AT91SAM9G10"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
 
 config SOC_AT91SAM9263
 	bool "AT91SAM9263"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 
 config SOC_AT91SAM9RL
 	bool "AT91SAM9RL"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 
 config SOC_AT91SAM9G45
 	bool "AT91SAM9G45 or AT91SAM9M10 families"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
 	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
 
 config SOC_AT91SAM9X5
 	bool "AT91SAM9x5 family"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
 	  This means that your SAM9 name finishes with a '5' (except if it is
@@ -97,9 +91,9 @@
 
 config SOC_AT91SAM9N12
 	bool "AT91SAM9N12 family"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
@@ -144,9 +138,9 @@
 config ARCH_AT91X40
 	bool "AT91x40"
 	depends on !MMU
+	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
-	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/leds.c linux-libre-3.7-gnu/arch/arm/mach-at91/leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/leds.c	2012-12-10 22:30:57.000000000 -0500
@@ -90,108 +90,3 @@
 #else
 void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
 #endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
-	at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
-	at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
-	unsigned long is_off = at91_get_gpio_value(led);
-	if (is_off)
-		at91_led_on(led);
-	else
-		at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		at91_led_on(at91_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		at91_led_toggle(at91_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		at91_led_on(at91_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if (!at91_leds_timer || !at91_leds_cpu)
-		return -ENODEV;
-
-	leds_event = at91_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	at91_set_gpio_output(cpu_led, 1);
-	at91_set_gpio_output(timer_led, 1);
-
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-at91/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-at91/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/Makefile.boot	2012-12-10 22:30:57.000000000 -0500
@@ -12,27 +12,3 @@
 params_phys-y	:= 0x20000100
 initrd_phys-y	:= 0x20410000
 endif
-
-# Keep dtb files sorted alphabetically for each SoC
-# sam9260
-dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
-# sam9263
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
-# sam9g45
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
-# sam9n12
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
-# sam9x5
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/pm.c linux-libre-3.7-gnu/arch/arm/mach-at91/pm.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/pm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/pm.c	2012-12-10 22:30:57.000000000 -0500
@@ -153,7 +153,9 @@
 		}
 	}
 
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+	if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS))
+		return 1;
+
 	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
 	for (i = 0; i < 4; i++) {
 		u32 css;
@@ -167,7 +169,6 @@
 			return 0;
 		}
 	}
-#endif
 
 	return 1;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-at91/setup.c linux-libre-3.7-gnu/arch/arm/mach-at91/setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-at91/setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-at91/setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -47,7 +47,7 @@
 void __init at91_init_interrupts(unsigned int *priority)
 {
 	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
+	at91_aic_init(priority, at91_extern_irq);
 
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
@@ -73,7 +73,7 @@
 {
 	struct map_desc *desc = &sram_desc[bank];
 
-	desc->virtual = AT91_IO_VIRT_BASE - length;
+	desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length;
 	if (bank > 0)
 		desc->virtual -= sram_desc[bank - 1].length;
 
@@ -87,8 +87,8 @@
 	iotable_init(desc, 1);
 }
 
-static struct map_desc at91_io_desc __initdata = {
-	.virtual	= AT91_VA_BASE_SYS,
+static struct map_desc at91_io_desc __initdata __maybe_unused = {
+	.virtual	= (unsigned long)AT91_VA_BASE_SYS,
 	.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 	.length		= SZ_16K,
 	.type		= MT_DEVICE,
@@ -151,7 +151,7 @@
 	}
 
 	/* at91sam9g10 */
-	if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+	if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
 		at91_soc_initdata.type = AT91_SOC_SAM9G10;
 		at91_boot_soc = at91sam9261_soc;
 	}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcm2835/bcm2835.c linux-libre-3.7-gnu/arch/arm/mach-bcm2835/bcm2835.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcm2835/bcm2835.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-bcm2835/bcm2835.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irqchip/bcm2835.h>
+#include <linux/of_platform.h>
+#include <linux/bcm2835_timer.h>
+#include <linux/clk/bcm2835.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/bcm2835_soc.h>
+
+static struct map_desc io_map __initdata = {
+	.virtual = BCM2835_PERIPH_VIRT,
+	.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
+	.length = BCM2835_PERIPH_SIZE,
+	.type = MT_DEVICE
+};
+
+void __init bcm2835_map_io(void)
+{
+	iotable_init(&io_map, 1);
+}
+
+void __init bcm2835_init(void)
+{
+	int ret;
+
+	bcm2835_init_clocks();
+
+	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
+				   NULL);
+	if (ret) {
+		pr_err("of_platform_populate failed: %d\n", ret);
+		BUG();
+	}
+}
+
+static const char * const bcm2835_compat[] = {
+	"brcm,bcm2835",
+	NULL
+};
+
+DT_MACHINE_START(BCM2835, "BCM2835")
+	.map_io = bcm2835_map_io,
+	.init_irq = bcm2835_init_irq,
+	.handle_irq = bcm2835_handle_irq,
+	.init_machine = bcm2835_init,
+	.timer = &bcm2835_timer,
+	.dt_compat = bcm2835_compat
+MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * Derived from code:
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_BCM2835_BCM2835_SOC_H__
+#define __MACH_BCM2835_BCM2835_SOC_H__
+
+#include <asm/sizes.h>
+
+#define BCM2835_PERIPH_PHYS	0x20000000
+#define BCM2835_PERIPH_VIRT	0xf0000000
+#define BCM2835_PERIPH_SIZE	SZ_16M
+#define BCM2835_DEBUG_PHYS	0x20201000
+#define BCM2835_DEBUG_VIRT	0xf0201000
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/debug-macro.S linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/debug-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/debug-macro.S	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/bcm2835_soc.h>
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =BCM2835_DEBUG_PHYS
+	ldr	\rv, =BCM2835_DEBUG_VIRT
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/timex.h linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/timex.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/timex.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,26 @@
+/*
+ *  BCM2835 system clock frequency
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		(1000000)
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/uncompress.h linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/uncompress.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcm2835/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-bcm2835/include/mach/uncompress.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/bcm2835_soc.h>
+
+#define UART0_BASE BCM2835_DEBUG_PHYS
+
+#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR)
+#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR)
+#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR)
+
+static inline void putc(int c)
+{
+	while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF)
+		barrier();
+
+	__raw_writel(c, BCM2835_UART_DR);
+}
+
+static inline void flush(void)
+{
+	int fr;
+
+	do {
+		fr = __raw_readl(BCM2835_UART_FR);
+		barrier();
+	} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcm2835/Makefile linux-libre-3.7-gnu/arch/arm/mach-bcm2835/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-bcm2835/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-bcm2835/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1 @@
+obj-y += bcm2835.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcm2835/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-bcm2835/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-bcm2835/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-bcm2835/Makefile.boot	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,3 @@
+   zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/arch.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/arch.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/arch.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/arch.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,199 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-
-#include <linux/proc_fs.h>
-#include <linux/sysctl.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/pmu.h>
-
-#include <asm/mach/arch.h>
-#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <cfg_global.h>
-
-#include "core.h"
-
-HW_DECLARE_SPINLOCK(arch)
-HW_DECLARE_SPINLOCK(gpio)
-#if defined(CONFIG_DEBUG_SPINLOCK)
-    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
-#endif
-
-/* sysctl */
-static int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
-
-static void bcmring_restart(char mode, const char *cmd)
-{
-	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
-	if (mode == 'h') {
-		/* Reboot configured in proc entry */
-		if (bcmring_arch_warm_reboot) {
-			printk("warm reset\n");
-			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
-		} else {
-			/* Force reset of everything */
-			printk("force reset\n");
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-	} else {
-		/* Force reset of everything */
-		printk("force reset\n");
-		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-	}
-}
-
-static struct ctl_table_header *bcmring_sysctl_header;
-
-static struct ctl_table bcmring_sysctl_warm_reboot[] = {
-	{
-	 .procname = "warm",
-	 .data = &bcmring_arch_warm_reboot,
-	 .maxlen = sizeof(int),
-	 .mode = 0644,
-	 .proc_handler = proc_dointvec},
-	{}
-};
-
-static struct ctl_table bcmring_sysctl_reboot[] = {
-	{
-	 .procname = "reboot",
-	 .mode = 0555,
-	 .child = bcmring_sysctl_warm_reboot},
-	{}
-};
-
-static struct resource nand_resource[] = {
-	[0] = {
-		.start = MM_ADDR_IO_NAND,
-		.end = MM_ADDR_IO_NAND + 0x1000 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nand_device = {
-	.name = "bcm-nand",
-	.id = -1,
-	.resource = nand_resource,
-	.num_resources	= ARRAY_SIZE(nand_resource),
-};
-
-static struct resource pmu_resource = {
-	.start	= IRQ_PMUIRQ,
-	.end	= IRQ_PMUIRQ,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&nand_device,
-	&pmu_device,
-};
-
-/****************************************************************************
-*
-*   Called from the customize_machine function in arch/arm/kernel/setup.c
-*
-*   The customize_machine function is tagged as an arch_initcall
-*   (see include/linux/init.h for the order that the various init sections
-*   are called in.
-*
-*****************************************************************************/
-static void __init bcmring_init_machine(void)
-{
-
-	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
-
-	/* Enable spread spectrum */
-	chipcHw_enableSpreadSpectrum();
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	bcmring_amba_init();
-
-	dma_init();
-}
-
-/****************************************************************************
-*
-*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
-*   passed in by the boot loader.
-*
-*****************************************************************************/
-
-static void __init bcmring_fixup(struct tag *t, char **cmdline,
-	struct meminfo *mi) {
-#ifdef CONFIG_BLK_DEV_INITRD
-	printk(KERN_NOTICE "bcmring_fixup\n");
-	t->hdr.tag = ATAG_CORE;
-	t->hdr.size = tag_size(tag_core);
-	t->u.core.flags = 0;
-	t->u.core.pagesize = PAGE_SIZE;
-	t->u.core.rootdev = 31 << 8 | 0;
-	t = tag_next(t);
-
-	t->hdr.tag = ATAG_MEM;
-	t->hdr.size = tag_size(tag_mem32);
-	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
-	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
-
-	t = tag_next(t);
-
-	t->hdr.tag = ATAG_NONE;
-	t->hdr.size = 0;
-#endif
-}
-
-/****************************************************************************
-*
-*   Machine Description
-*
-*****************************************************************************/
-
-MACHINE_START(BCMRING, "BCMRING")
-	/* Maintainer: Broadcom Corporation */
-	.fixup = bcmring_fixup,
-	.map_io = bcmring_map_io,
-	.init_early = bcmring_init_early,
-	.init_irq = bcmring_init_irq,
-	.timer = &bcmring_timer,
-	.init_machine = bcmring_init_machine,
-	.restart = bcmring_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/clock.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/clock.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/clock.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/clock.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,223 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-#include <mach/csp/hw_cfg.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_reg.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include "clock.h"
-
-#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
-#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
-#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
-#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
-#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
-
-#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	/* enable parent clock first */
-	if (clk->parent)
-		__clk_enable(clk->parent);
-
-	if (clk->use_cnt++ == 0) {
-		if (clk_is_pll1(clk)) {	/* PLL1 */
-			chipcHw_pll1Enable(clk->rate_hz, 0);
-		} else if (clk_is_pll2(clk)) {	/* PLL2 */
-			chipcHw_pll2Enable(clk->rate_hz);
-		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
-			if (!clk_is_primary(clk))
-				chipcHw_bypassClockEnable(clk->csp_id);
-		} else {	/* source is PLL */
-			chipcHw_setClockEnable(clk->csp_id);
-		}
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	BUG_ON(clk->use_cnt == 0);
-
-	if (--clk->use_cnt == 0) {
-		if (clk_is_pll1(clk)) {	/* PLL1 */
-			chipcHw_pll1Disable();
-		} else if (clk_is_pll2(clk)) {	/* PLL2 */
-			chipcHw_pll2Disable();
-		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
-			if (!clk_is_primary(clk))
-				chipcHw_bypassClockDisable(clk->csp_id);
-		} else {	/* source is PLL */
-			chipcHw_setClockDisable(clk->csp_id);
-		}
-	}
-
-	if (clk->parent)
-		__clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (!clk)
-		return 0;
-
-	return clk->rate_hz;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	unsigned long actual;
-	unsigned long rate_hz;
-
-	if (!clk)
-		return -EINVAL;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-
-	if (clk->use_cnt)
-		return -EBUSY;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	actual = clk->parent->rate_hz;
-	rate_hz = min(actual, rate);
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return rate_hz;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	unsigned long actual;
-	unsigned long rate_hz;
-
-	if (!clk)
-		return -EINVAL;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-
-	if (clk->use_cnt)
-		return -EBUSY;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	actual = clk->parent->rate_hz;
-	rate_hz = min(actual, rate);
-	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
-	clk->rate_hz = rate_hz;
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	if (!clk)
-		return NULL;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	struct clk *old_parent;
-
-	if (!clk || !parent)
-		return -EINVAL;
-
-	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
-		return -EINVAL;
-
-	/* if more than one user, parent is not allowed */
-	if (clk->use_cnt > 1)
-		return -EBUSY;
-
-	if (clk->parent == parent)
-		return 0;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	old_parent = clk->parent;
-	clk->parent = parent;
-	if (clk_is_using_xtal(parent))
-		clk->mode |= CLK_MODE_XTAL;
-	else
-		clk->mode &= (~CLK_MODE_XTAL);
-
-	/* if clock is active */
-	if (clk->use_cnt != 0) {
-		clk->use_cnt--;
-		/* enable clock with the new parent */
-		__clk_enable(clk);
-		/* disable the old parent */
-		__clk_disable(old_parent);
-	}
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/clock.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/clock.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/clock.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/clock.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-#include <mach/csp/chipcHw_def.h>
-
-#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
-#define CLK_TYPE_PLL1            2	/* PPL1 */
-#define CLK_TYPE_PLL2            4	/* PPL2 */
-#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
-#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
-
-#define CLK_MODE_XTAL            1	/* clock source is from crystal */
-
-struct clk {
-	const char *name;	/* clock name */
-	unsigned int type;	/* clock type */
-	unsigned int mode;	/* current mode */
-	volatile int use_bypass;	/* indicate if it's in bypass mode */
-	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
-	unsigned long rate_hz;	/* clock rate in Hz */
-	unsigned int use_cnt;	/* usage count */
-	struct clk *parent;	/* parent clock */
-};
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/core.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/core.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/core.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/core.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,228 +0,0 @@
-/*
- *  derived from linux/arch/arm/mach-versatile/core.c
- *  linux/arch/arm/mach-bcmring/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* Portions copyright Broadcom 2008 */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/clkdev.h>
-
-#include <mach/csp/mm_addr.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <cfg_global.h>
-
-#include "clock.h"
-
-#include <csp/secHw.h>
-#include <mach/csp/secHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-#include <mach/csp/tmrHw_reg.h>
-
-static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
-static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
-
-static struct clk pll1_clk = {
-	.name = "PLL1",
-	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
-	.rate_hz = 2000000000,
-	.use_cnt = 7,
-};
-
-static struct clk uart_clk = {
-	.name = "UART",
-	.type = CLK_TYPE_PROGRAMMABLE,
-	.csp_id = chipcHw_CLOCK_UART,
-	.rate_hz = HW_CFG_UART_CLK_HZ,
-	.parent = &pll1_clk,
-};
-
-static struct clk dummy_apb_pclk = {
-	.name = "BUSCLK",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-};
-
-/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
-#if defined(CONFIG_ARCH_FPGA11107)
-/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
-/* slow down Linux's sense of time */
-#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
-#else
-#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
-#endif
-
-static struct clk sp804_timer012_clk = {
-	.name = "sp804-timer-0,1,2",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-	.rate_hz = TIMER1_FREQUENCY_MHZ * 1000000,
-};
-
-static struct clk sp804_timer3_clk = {
-	.name = "sp804-timer-3",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-	.rate_hz = TIMER3_FREQUENCY_KHZ * 1000,
-};
-
-static struct clk_lookup lookups[] = {
-	{			/* Bus clock */
-		.con_id = "apb_pclk",
-		.clk = &dummy_apb_pclk,
-	}, {			/* UART0 */
-		.dev_id = "uarta",
-		.clk = &uart_clk,
-	}, {			/* UART1 */
-		.dev_id = "uartb",
-		.clk = &uart_clk,
-	}, {			/* SP804 timer 0 */
-		.dev_id = "sp804",
-		.con_id = "timer0",
-		.clk = &sp804_timer012_clk,
-	}, {			/* SP804 timer 1 */
-		.dev_id = "sp804",
-		.con_id = "timer1",
-		.clk = &sp804_timer012_clk,
-	}, {			/* SP804 timer 3 */
-		.dev_id = "sp804",
-		.con_id = "timer3",
-		.clk = &sp804_timer3_clk,
-	}
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uartA_device,
-	&uartB_device,
-};
-
-void __init bcmring_amba_init(void)
-{
-	int i;
-	u32 bus_clock;
-
-/* Linux is run initially in non-secure mode. Secure peripherals */
-/* generate FIQ, and must be handled in secure mode. Until we have */
-/* a linux security monitor implementation, keep everything in */
-/* non-secure mode. */
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
-	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
-			  secHw_BLK_MASK_KEY_SCAN |
-			  secHw_BLK_MASK_TOUCH_SCREEN |
-			  secHw_BLK_MASK_UART0 |
-			  secHw_BLK_MASK_UART1 |
-			  secHw_BLK_MASK_WATCHDOG |
-			  secHw_BLK_MASK_SPUM |
-			  secHw_BLK_MASK_DDR2 |
-			  secHw_BLK_MASK_SPU |
-			  secHw_BLK_MASK_PKA |
-			  secHw_BLK_MASK_RNG |
-			  secHw_BLK_MASK_RTC |
-			  secHw_BLK_MASK_OTP |
-			  secHw_BLK_MASK_BOOT |
-			  secHw_BLK_MASK_MPU |
-			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
-
-	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
-	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
-	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
-	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
-	bus_clock = chipcHw_REG_BUS_CLOCK_GE
-	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
-
-	chipcHw_busInterfaceClockEnable(bus_clock);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE		((void __iomem *)MM_IO_BASE_TMR)
-#define TIMER1_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x20))
-#define TIMER2_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x40))
-#define TIMER3_VA_BASE          ((void __iomem *)(MM_IO_BASE_TMR + 0x60))
-
-static int __init bcmring_clocksource_init(void)
-{
-	/* setup timer1 as free-running clocksource */
-	sp804_clocksource_init(TIMER1_VA_BASE, "timer1");
-
-	/* setup timer3 as free-running clocksource */
-	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
-
-	return 0;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init bcmring_init_timer(void)
-{
-	printk(KERN_INFO "bcmring_init_timer\n");
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	bcmring_clocksource_init();
-
-	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
-}
-
-struct sys_timer bcmring_timer = {
-	.init = bcmring_init_timer,
-};
-
-void __init bcmring_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/core.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/core.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/core.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/core.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,31 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* Portions copyright Broadcom 2008 */
-#ifndef __ASM_ARCH_BCMRING_H
-#define __ASM_ARCH_BCMRING_H
-
-void __init bcmring_amba_init(void);
-void __init bcmring_map_io(void);
-void __init bcmring_init_irq(void);
-void __init bcmring_init_early(void);
-
-extern struct sys_timer bcmring_timer;
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,776 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw.c
-*
-*  @brief   Low level Various CHIP clock controlling routines
-*
-*  @note
-*
-*   These routines provide basic clock controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <csp/reg.h>
-#include <csp/delay.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-
-/* VPM alignment algorithm uses this */
-#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
-#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
-
-/* Local definition of clock type */
-#define PLL_CLOCK                      1	/* PLL Clock */
-#define NON_PLL_CLOCK                  2	/* Divider clock */
-
-static int chipcHw_divide(int num, int denom)
-    __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in hertz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    ) {
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
-	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
-	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
-	uint32_t dependentClockType = 0;
-	uint32_t vcoHz = 0;
-
-	/* Get VCO frequencies */
-	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		uint64_t adjustFreq = 0;
-
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
-		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
-			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
-			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
-		vcoFreqPll1Hz += (uint32_t) adjustFreq;
-	} else {
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-	}
-	vcoFreqPll2Hz =
-	    chipcHw_XTAL_FREQ_Hz *
-		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		pPLLReg = &pChipcHw->DDRClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_VPM:
-		pPLLReg = &pChipcHw->VPMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		pDependentClock = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		pDependentClock = &pChipcHw->ACLKClock;
-		dependentClockType = NON_PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		pDependentClock = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		/* Obtain PLL clock frequency */
-		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
-			/* Return crystal clock frequency when bypassed */
-			return chipcHw_XTAL_FREQ_Hz;
-		} else if (clock == chipcHw_CLOCK_DDR) {
-			/* DDR frequency is configured in PLLDivider register */
-			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
-		} else {
-			/* From chip revision number B0, LCD clock is internally divided by 2 */
-			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
-				vcoHz >>= 1;
-			}
-			/* Obtain PLL clock frequency using VCO dividers */
-			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
-		}
-	} else if (pClockCtrl) {
-		/* Obtain divider clock frequency */
-		uint32_t div;
-		uint32_t freq = 0;
-
-		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
-			/* Return crystal clock frequency when bypassed */
-			return chipcHw_XTAL_FREQ_Hz;
-		} else if (pDependentClock) {
-			/* Identify the dependent clock frequency */
-			switch (dependentClockType) {
-			case PLL_CLOCK:
-				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
-					/* Use crystal clock frequency when dependent PLL clock is bypassed */
-					freq = chipcHw_XTAL_FREQ_Hz;
-				} else {
-					/* Obtain PLL clock frequency using VCO dividers */
-					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
-					freq = div ? chipcHw_divide(vcoHz, div) : 0;
-				}
-				break;
-			case NON_PLL_CLOCK:
-				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
-					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
-				} else {
-					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
-						/* Use crystal clock frequency when dependent divider clock is bypassed */
-						freq = chipcHw_XTAL_FREQ_Hz;
-					} else {
-						/* Obtain divider clock frequency using XTAL dividers */
-						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
-					}
-				}
-				break;
-			}
-		} else {
-			/* Dependent on crystal clock */
-			freq = chipcHw_XTAL_FREQ_Hz;
-		}
-
-		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-		return chipcHw_divide(freq, (div ? div : 256));
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in Hz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
-				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
-    ) {
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
-	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
-	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
-	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
-	uint32_t dependentClockType = 0;
-	uint32_t vcoHz = 0;
-	uint32_t desVcoHz = 0;
-
-	/* Get VCO frequencies */
-	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		uint64_t adjustFreq = 0;
-
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
-		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
-			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
-			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
-		vcoFreqPll1Hz += (uint32_t) adjustFreq;
-
-		/* Desired VCO frequency */
-		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
-	} else {
-		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-	}
-	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		/* Configure the DDR_ctrl:BUS ratio settings */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
-			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
-				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-		pPLLReg = &pChipcHw->DDRClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_VPM:
-		/* Configure the VPM:BUS ratio settings */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
-				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-		pPLLReg = &pChipcHw->VPMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		pDependentClock = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		pDependentClock = &pChipcHw->ACLKClock;
-		dependentClockType = NON_PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		pDependentClock = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		/* Select XTAL as bypass source */
-		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
-		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-		/* For DDR settings use only the PLL divider clock */
-		if (pPLLReg == &pChipcHw->DDRClock) {
-			/* Set M1DIV for PLL1, which controls the DDR clock */
-			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
-			/* Calculate expected frequency */
-			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
-		} else {
-			/* From chip revision number B0, LCD clock is internally divided by 2 */
-			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
-				desVcoHz >>= 1;
-				vcoHz >>= 1;
-			}
-			/* Set MDIV to change the frequency */
-			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
-			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
-			/* Calculate expected frequency */
-			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
-		}
-		/* Wait for for atleast 200ns as per the protocol to change frequency */
-		udelay(1);
-		/* Do not bypass */
-		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-		/* Return the configured frequency */
-		return freq;
-	} else if (pClockCtrl) {
-		uint32_t divider = 0;
-
-		/* Divider clock should not be bypassed  */
-		reg32_modify_and(pClockCtrl,
-				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-
-		/* Identify the clock source */
-		if (pDependentClock) {
-			switch (dependentClockType) {
-			case PLL_CLOCK:
-				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
-				break;
-			case NON_PLL_CLOCK:
-				{
-					uint32_t sourceClock = 0;
-
-					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
-						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
-					} else {
-						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
-					}
-					divider = chipcHw_divide(sourceClock, freq);
-				}
-				break;
-			}
-		} else {
-			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
-		}
-
-		if (divider) {
-			REG_LOCAL_IRQ_SAVE;
-			/* Set the divider to obtain the required frequency */
-			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
-			REG_LOCAL_IRQ_RESTORE;
-			return freq;
-		}
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(chipcHw_setClockFrequency);
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success (# of adjustment required)
-*            -1 : On failure
-*
-*/
-/****************************************************************************/
-static int vpmPhaseAlignA0(void)
-{
-	uint32_t phaseControl;
-	uint32_t phaseValue;
-	uint32_t prevPhaseComp;
-	int iter = 0;
-	int adjustCount = 0;
-	int count = 0;
-
-	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
-		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
-		phaseValue = 0;
-		prevPhaseComp = 0;
-
-		/* Step 1: Look for falling PH_COMP transition */
-
-		/* Read the contents of VPM Clock resgister */
-		phaseValue = pChipcHw->VPMClock;
-		do {
-			/* Store previous value of phase comparator */
-			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Read the contents of  VPM Clock resgister. */
-			phaseValue = pChipcHw->VPMClock;
-
-			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
-				phaseControl = (0x3F & (phaseControl - 1));
-			} else {
-				/* Increment to the Phase count value for next write, if Phase is not stable. */
-				phaseControl = (0x3F & (phaseControl + 1));
-			}
-			/* Count number of adjustment made */
-			adjustCount++;
-		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
-			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
-			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
-		    );
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
-
-		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
-			phaseControl = (0x3F & (phaseControl + 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if (count != 5) {
-			/* Detected false transition */
-			continue;
-		}
-
-		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
-
-		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
-			phaseControl = (0x3F & (phaseControl - 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if (count != 3) {
-			/* Detected noisy transition */
-			continue;
-		}
-
-		/* Step 4: Keep moving backward before the original transition took place. */
-
-		for (count = 0; (count < 5); count++) {
-			phaseControl = (0x3F & (phaseControl - 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
-			/* Detected false transition */
-			continue;
-		}
-
-		/* Step 5: Re discover the valid transition */
-
-		do {
-			/* Store previous value of phase comparator */
-			prevPhaseComp = phaseValue;
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^=
-			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Read the contents of  VPM Clock resgister. */
-			phaseValue = pChipcHw->VPMClock;
-
-			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
-				phaseControl = (0x3F & (phaseControl - 1));
-			} else {
-				/* Increment to the Phase count value for next write, if Phase is not stable. */
-				phaseControl = (0x3F & (phaseControl + 1));
-			}
-
-			/* Count number of adjustment made */
-			adjustCount++;
-		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
-			return -1;
-		} else {
-			/* Valid phase must have detected */
-			break;
-		}
-	}
-
-	/* For VPM Phase should be perfectly aligned. */
-	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
-		/* Load new phase value */
-		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-	/* Return the status */
-	return (int)adjustCount;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success (# of adjustment required)
-*            -1 : On failure
-*
-*/
-/****************************************************************************/
-int chipcHw_vpmPhaseAlign(void)
-{
-
-	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
-		return vpmPhaseAlignA0();
-	} else {
-		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
-		uint32_t phaseValue = 0;
-		int adjustCount = 0;
-
-		/* Disable VPM access */
-		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-		/* Disable HW VPM phase alignment  */
-		chipcHw_vpmHwPhaseAlignDisable();
-		/* Enable SW VPM phase alignment  */
-		chipcHw_vpmSwPhaseAlignEnable();
-		/* Adjust VPM phase */
-		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
-			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
-
-			/* Adjust phase control value */
-			if (phaseValue > 0xF) {
-				/* Increment phase control value */
-				phaseControl++;
-			} else if (phaseValue < 0xF) {
-				/* Decrement phase control value */
-				phaseControl--;
-			} else {
-				/* Enable VPM access */
-				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-				/* Return adjust count */
-				return adjustCount;
-			}
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Count adjustment */
-			adjustCount++;
-		}
-	}
-
-	/* Disable VPM access */
-	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-	return -1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Local Divide function
-*
-*  This function does the divide
-*
-*  @return divide value
-*
-*/
-/****************************************************************************/
-static int chipcHw_divide(int num, int denom)
-{
-	int r;
-	int t = 1;
-
-	/* Shift denom and t up to the largest value to optimize algorithm */
-	/* t contains the units of each divide */
-	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
-		denom = denom << 1;
-		t = t << 1;
-	}
-
-	/* Initialize the result */
-	r = 0;
-
-	do {
-		/* Determine if there exists a positive remainder */
-		if ((num - denom) >= 0) {
-			/* Accumlate t to the result and calculate a new remainder */
-			num = num - denom;
-			r = r + t;
-		}
-		/* Continue to shift denom and shift t down to 0 */
-		denom = denom >> 1;
-		t = t >> 1;
-	} while (t != 0);
-
-	return r;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,293 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw_init.c
-*
-*  @brief   Low level CHIPC PLL configuration functions
-*
-*  @note
-*
-*   These routines provide basic PLL controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <csp/reg.h>
-#include <csp/delay.h>
-/* ---- Private Constants and Types --------------------------------------- */
-
-/*
-    Calculation for NDIV_i to obtain VCO frequency
-    -----------------------------------------------
-
-	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
-	for Freq_vco = VCO_FREQ_MHz
-		Freq_ref = chipcHw_XTAL_FREQ_Hz
-		PLL_P1 = PLL_P2 = 1
-		and
-		PLL_NDIV_f = 0
-
-	We get:
-		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
-
-    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
-    -----------------------------------------------------------------
-		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
-
-		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
-*/
-
-/* ---- Private Variables ------------------------------------------------- */
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL2
-*
-*  This function initializes the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz)
-{
-	uint32_t pllPreDivider2 = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		pChipcHw->PLLConfig2 =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-
-		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider2 = pllPreDivider2;
-		/* Set NDIV Frac */
-		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
-
-		/* This has to be removed once the default values are fixed for PLL2. */
-		pChipcHw->PLLControl12 = 0x38000700;
-		pChipcHw->PLLControl22 = 0x00000015;
-
-		/* Reset PLL2 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-		REG_LOCAL_IRQ_RESTORE;
-	}
-
-	/* Insert certain amount of delay before deasserting ARESET. */
-	udelay(1);
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove analog reset and Power on the PLL */
-		pChipcHw->PLLConfig2 &=
-		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-
-		REG_LOCAL_IRQ_RESTORE;
-
-	}
-
-	/* Wait until PLL is locked */
-	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-		;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove digital reset */
-		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll2Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL1
-*
-*  This function initializes the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
-{
-	uint32_t pllPreDivider = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->PLLConfig =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-		/* Setting VCO frequency */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pllPreDivider =
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
-			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
-			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		} else {
-			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		}
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider = pllPreDivider;
-		/* Set NDIV Frac */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
-		} else {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
-		}
-
-		/* Reset PLL1 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-
-		REG_LOCAL_IRQ_RESTORE;
-
-		/* Insert certain amount of delay before deasserting ARESET. */
-		udelay(1);
-
-		{
-			REG_LOCAL_IRQ_SAVE;
-			/* Remove analog reset and Power on the PLL */
-			pChipcHw->PLLConfig &=
-			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-
-		/* Wait until PLL is locked */
-		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
-		       || !(pChipcHw->
-			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-			;
-
-		/* Remove digital reset */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-			REG_LOCAL_IRQ_RESTORE;
-		}
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll1Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the chipc module
-*
-*  This function initializes the PLLs and core system clocks
-*
-*/
-/****************************************************************************/
-
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
-    ) {
-#if !(defined(__KERNEL__) && !defined(STANDALONE))
-	delay_init();
-#endif
-
-	/* Do not program PLL, when warm reset */
-	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
-		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
-				   initParam->ssSupport);
-		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
-	} else {
-		/* Clear sticky bits */
-		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
-	}
-	/* Clear sticky bits */
-	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
-
-	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
-	pChipcHw->ACLKClock =
-	    (pChipcHw->
-	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
-								 armBusRatio &
-								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
-
-	/* Set various core component frequencies. The order in which this is done is important for some. */
-	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
-	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
-	/* then VPM and RTBUS. */
-
-	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
-				  initParam->busClockFreqHz *
-				  initParam->armBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
-				  initParam->busClockFreqHz *
-				  initParam->vpmBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
-				  initParam->busClockFreqHz *
-				  initParam->ddrBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
-				  initParam->busClockFreqHz / 2);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,124 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-#include <csp/intcHw.h>
-#include <csp/cache.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-/* ---- Private Variables ------------------------------------------------- */
-void chipcHw_reset_run_from_aram(void);
-
-typedef void (*RUNFUNC) (void);
-
-/****************************************************************************/
-/**
-*  @brief   warmReset
-*
-*  @note warmReset configures the clocks which are not reset back to the state
-*   required to execute on reset.  To do so we need to copy the code into internal
-*   memory to change the ARM clock while we are not executing from DDR.
-*/
-/****************************************************************************/
-void chipcHw_reset(uint32_t mask)
-{
-	int i = 0;
-	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
-
-	/* Disable all interrupts */
-	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
-	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
-	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
-			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-		/* Bypass the PLL clocks before reboot */
-		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
-		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
-
-		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
-		do {
-			((uint32_t *) MM_IO_BASE_ARAM)[i] =
-			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
-			i++;
-		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
-
-		CSP_CACHE_FLUSH_ALL;
-
-		/* run the function from ARAM */
-		runFunc();
-
-		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/* This function must run from internal memory */
-void chipcHw_reset_run_from_aram(void)
-{
-/* Make sure, pipeline is filled with instructions coming from ARAM */
-__asm (" nop                                                            \n\t"
-		" nop                                                            \n\t"
-#if defined(__KERNEL__) && !defined(STANDALONE)
-		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
-		" BIC      r0,r0,#0xd                                            \n\t"
-		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-#endif
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-/* Bypass the ARM clock and switch to XTAL clock */
-		" MOV      r2,#0x80000000                                        \n\t"
-		" LDR      r3,[r2,#8]                                            \n\t"
-		" ORR      r3,r3,#0x20000                                        \n\t"
-		" STR      r3,[r2,#8]                                            \n\t"
-
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-/* Issue reset */
-		" MOV      r3,#0x2                                               \n\t"
-		" STR      r3,[r2,#0x80]                                         \n\t"
-/* End here */
-		" MOV      pc,pc                                                 \n\t");
-/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,64 +0,0 @@
-/*****************************************************************************
-* Copyright 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-/****************************************************************************/
-/**
-*  @file    chipcHw_str.c
-*
-*  @brief   Contains strings which are useful to linux and csp
-*
-*  @note
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <mach/csp/chipcHw_inline.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-
-static const char *gMuxStr[] = {
-	"GPIO",			/* 0 */
-	"KeyPad",		/* 1 */
-	"I2C-Host",		/* 2 */
-	"SPI",			/* 3 */
-	"Uart",			/* 4 */
-	"LED-Mtx-P",		/* 5 */
-	"LED-Mtx-S",		/* 6 */
-	"SDIO-0",		/* 7 */
-	"SDIO-1",		/* 8 */
-	"PCM",			/* 9 */
-	"I2S",			/* 10 */
-	"ETM",			/* 11 */
-	"Debug",		/* 12 */
-	"Misc",			/* 13 */
-	"0xE",			/* 14 */
-	"0xF",			/* 15 */
-};
-
-/****************************************************************************/
-/**
-*  @brief   Retrieves a string representation of the mux setting for a pin.
-*
-*  @return  Pointer to a character string.
-*/
-/****************************************************************************/
-
-const char *chipcHw_getGpioPinFunctionStr(int pin)
-{
-	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
-		return "";
-	}
-
-	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/Makefile linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/chipc/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/chipc/Makefile	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,917 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw.c
-*
-*  @brief   Low level DMA controller driver routines
-*
-*  @note
-*
-*   These routines provide basic DMA functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/string.h>
-#include <stddef.h>
-
-#include <csp/dmacHw.h>
-#include <mach/csp/dmacHw_reg.h>
-#include <mach/csp/dmacHw_priv.h>
-#include <mach/csp/chipcHw_inline.h>
-
-/* ---- External Function Prototypes ------------------------------------- */
-
-/* Allocate DMA control blocks */
-dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
-
-uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
-uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
-
-/****************************************************************************/
-/**
-*  @brief   Get maximum FIFO for a DMA channel
-*
-*  @return  Maximum allowable FIFO size
-*
-*
-*/
-/****************************************************************************/
-static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	uint32_t val = 0;
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_MISC_t *pMiscReg =
-	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
-
-	switch (pCblk->channel) {
-	case 0:
-		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
-		break;
-	case 1:
-		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
-		break;
-	case 2:
-		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
-		break;
-	case 3:
-		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
-		break;
-	case 4:
-		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
-		break;
-	case 5:
-		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
-		break;
-	case 6:
-		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
-		break;
-	case 7:
-		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
-		break;
-	}
-
-	if (val <= 0x4) {
-		return 8 << val;
-	} else {
-		dmacHw_ASSERT(0);
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to initiate transfer
-*
-*  @return  void
-*
-*
-*  @note
-*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
-*     - This function should also be called from ISR to program the channel with
-*       pending descriptors
-*/
-/****************************************************************************/
-void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pProg;
-	dmacHw_CBLK_t *pCblk;
-
-	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		/* Not safe yet to program the channel */
-		return;
-	}
-
-	if (pCblk->varDataStarted) {
-		if (pCblk->descUpdated) {
-			pCblk->descUpdated = 0;
-			pProg =
-			    (dmacHw_DESC_t *) ((uint32_t)
-					       dmacHw_REG_LLP(pCblk->module,
-							      pCblk->channel) +
-					       pRing->virt2PhyOffset);
-
-			/* Load descriptor if not loaded */
-			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
-				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
-					       pProg->sar);
-				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
-					       pProg->dar);
-				dmacHw_REG_CTL_LO(pCblk->module,
-						  pCblk->channel) =
-				    pProg->ctl.lo;
-				dmacHw_REG_CTL_HI(pCblk->module,
-						  pCblk->channel) =
-				    pProg->ctl.hi;
-			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
-				/* Return as end descriptor is processed */
-				return;
-			} else {
-				dmacHw_ASSERT(0);
-			}
-		} else {
-			return;
-		}
-	} else {
-		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
-			/* Do not make a single chain, rather process one descriptor at a time */
-			pProg = pRing->pHead;
-			/* Point to the next descriptor for next iteration */
-			dmacHw_NEXT_DESC(pRing, pHead);
-		} else {
-			/* Return if no more pending descriptor */
-			if (pRing->pEnd == NULL) {
-				return;
-			}
-
-			pProg = pRing->pProg;
-			if (pConfig->transferMode ==
-			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
-				/* Make sure a complete ring can be formed */
-				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
-					      llp == pRing->pProg);
-				/* Make sure pProg pointing to the pHead */
-				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
-					      pRing->pHead);
-				/* Make a complete ring */
-				do {
-					pRing->pProg->ctl.lo |=
-					    (dmacHw_REG_CTL_LLP_DST_EN |
-					     dmacHw_REG_CTL_LLP_SRC_EN);
-					pRing->pProg =
-					    (dmacHw_DESC_t *) pRing->pProg->llp;
-				} while (pRing->pProg != pRing->pHead);
-			} else {
-				/* Make a single long chain */
-				while (pRing->pProg != pRing->pEnd) {
-					pRing->pProg->ctl.lo |=
-					    (dmacHw_REG_CTL_LLP_DST_EN |
-					     dmacHw_REG_CTL_LLP_SRC_EN);
-					pRing->pProg =
-					    (dmacHw_DESC_t *) pRing->pProg->llp;
-				}
-			}
-		}
-
-		/* Program the channel registers */
-		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
-		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
-		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
-			       (uint32_t) pProg - pRing->virt2PhyOffset);
-		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
-		    pProg->ctl.lo;
-		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
-		    pProg->ctl.hi;
-		if (pRing->pEnd) {
-			/* Remember the descriptor to use next */
-			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
-		}
-		/* Indicate no more pending descriptor  */
-		pRing->pEnd = (dmacHw_DESC_t *) NULL;
-	}
-	/* Start DMA operation */
-	dmacHw_DMA_START(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes DMA
-*
-*  This function initializes DMA CSP driver
-*
-*  @note
-*     Must be called before using any DMA channel
-*/
-/****************************************************************************/
-void dmacHw_initDma(void)
-{
-
-	uint32_t i = 0;
-
-	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
-	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
-
-	/* Enable access to the DMA block */
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
-
-	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
-		dmacHw_ASSERT(0);
-	}
-
-	memset((void *)dmacHw_gCblk, 0,
-	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
-	for (i = 0; i < dmaChannelCount_0; i++) {
-		dmacHw_gCblk[i].module = 0;
-		dmacHw_gCblk[i].channel = i;
-	}
-	for (i = 0; i < dmaChannelCount_1; i++) {
-		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
-		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Exit function for  DMA
-*
-*  This function isolates DMA from the system
-*
-*/
-/****************************************************************************/
-void dmacHw_exitDma(void)
-{
-	/* Disable access to the DMA block */
-	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
-	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets a handle to a DMA channel
-*
-*  This function returns a handle, representing a control block of a particular DMA channel
-*
-*  @return  -1       - On Failure
-*            handle  - On Success, representing a channel control block
-*
-*  @note
-*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
-    ) {
-	int idx;
-
-	switch ((channelId >> 8)) {
-	case 0:
-		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
-		idx = (channelId & 0xff);
-		break;
-	case 1:
-		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
-		idx = dmaChannelCount_0 + (channelId & 0xff);
-		break;
-	default:
-		dmacHw_ASSERT(0);
-		return (dmacHw_HANDLE_t) -1;
-	}
-
-	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes a DMA channel for use
-*
-*  This function initializes and resets a DMA channel for use
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	int module = pCblk->module;
-	int channel = pCblk->channel;
-
-	/* Reinitialize the control block */
-	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
-	pCblk->module = module;
-	pCblk->channel = channel;
-
-	/* Enable DMA controller */
-	dmacHw_DMA_ENABLE(pCblk->module);
-	/* Reset DMA channel */
-	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
-
-	/* Clear all raw interrupt status */
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-
-	/* Mask event specific interrupts */
-	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief  Finds amount of memory required to form a descriptor ring
-*
-*
-*  @return   Number of bytes required to form a descriptor ring
-*
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
-    ) {
-	/* Need extra 4 byte to ensure 32 bit alignment  */
-	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
-		sizeof(uint32_t);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes descriptor ring
-*
-*  This function will initializes the descriptor ring of a DMA channel
-*
-*
-*  @return   -1 - On failure
-*             0 - On success
-*  @note
-*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
-*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
-*       accessed by ARM and DMA
-*/
-/****************************************************************************/
-int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
-			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
-			  uint32_t len,	/*  [ IN ] Size of the pBuf */
-			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
-    ) {
-	uint32_t i;
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pDesc;
-
-	/* Check the alignment of the descriptor */
-	if ((uint32_t) pDescriptorVirt & 0x00000003) {
-		dmacHw_ASSERT(0);
-		return -1;
-	}
-
-	/* Check if enough space has been allocated for descriptor ring */
-	if (len < dmacHw_descriptorLen(num)) {
-		return -1;
-	}
-
-	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
-	pRing->pHead =
-	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
-	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
-	pRing->pProg = dmacHw_DESC_INIT;
-	/* Initialize link item chain, starting from the head */
-	pDesc = pRing->pHead;
-	/* Find the offset between virtual to physical address */
-	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
-
-	/* Form the descriptor ring */
-	for (i = 0; i < num - 1; i++) {
-		/* Clear link list item */
-		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
-		/* Point to the next item in the physical address */
-		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
-		/* Point to the next item in the virtual address */
-		pDesc->llp = (uint32_t) (pDesc + 1);
-		/* Mark descriptor is ready to use */
-		pDesc->ctl.hi = dmacHw_DESC_FREE;
-		/* Look into next link list item */
-		pDesc++;
-	}
-
-	/* Clear last link list item */
-	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
-	/* Last item pointing to the first item in the
-	   physical address to complete the ring */
-	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
-	/* Last item pointing to the first item in the
-	   virtual address to complete the ring
-	 */
-	pDesc->llp = (uint32_t) pRing->pHead;
-	/* Mark descriptor is ready to use */
-	pDesc->ctl.hi = dmacHw_DESC_FREE;
-	/* Set the number of descriptors in the ring */
-	pRing->num = num;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configure DMA channel
-*
-*  @return  0  : On success
-*           -1 : On failure
-*/
-/****************************************************************************/
-int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	uint32_t cfgHigh = 0;
-	int srcTrSize;
-	int dstTrSize;
-
-	pCblk->varDataStarted = 0;
-	pCblk->userData = NULL;
-
-	/* Configure
-	   - Burst transaction when enough data in available in FIFO
-	   - AHB Access protection 1
-	   - Source and destination peripheral ports
-	 */
-	cfgHigh =
-	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
-	    dmacHw_SRC_PERI_INTF(pConfig->
-				 srcPeripheralPort) |
-	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
-	/* Set priority */
-	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
-				    pConfig->channelPriority);
-
-	if (pConfig->dstStatusRegisterAddress != 0) {
-		/* Destination status update enable */
-		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
-		/* Configure status registers */
-		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
-				   pConfig->dstStatusRegisterAddress);
-	}
-
-	if (pConfig->srcStatusRegisterAddress != 0) {
-		/* Source status update enable */
-		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
-		/* Source status update enable */
-		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
-				   pConfig->srcStatusRegisterAddress);
-	}
-	/* Configure the config high register */
-	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
-
-	/* Clear all raw interrupt status */
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-
-	/* Configure block interrupt */
-	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure complete transfer interrupt */
-	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure error interrupt */
-	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure gather register */
-	if (pConfig->srcGatherWidth) {
-		srcTrSize =
-		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-		if (!
-		    ((pConfig->srcGatherWidth % srcTrSize)
-		     && (pConfig->srcGatherJump % srcTrSize))) {
-			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
-			    ((pConfig->srcGatherWidth /
-			      srcTrSize) << 20) | (pConfig->srcGatherJump /
-						   srcTrSize);
-		} else {
-			return -1;
-		}
-	}
-	/* Configure scatter register */
-	if (pConfig->dstScatterWidth) {
-		dstTrSize =
-		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-		if (!
-		    ((pConfig->dstScatterWidth % dstTrSize)
-		     && (pConfig->dstScatterJump % dstTrSize))) {
-			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
-			    ((pConfig->dstScatterWidth /
-			      dstTrSize) << 20) | (pConfig->dstScatterJump /
-						   dstTrSize);
-		} else {
-			return -1;
-		}
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indicates whether DMA transfer is in progress or completed
-*
-*  @return   DMA transfer status
-*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
-*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
-*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
-*
-*/
-/****************************************************************************/
-dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		return dmacHw_TRANSFER_STATUS_BUSY;
-	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
-		   (0x00000001 << pCblk->channel)) {
-		return dmacHw_TRANSFER_STATUS_ERROR;
-	}
-
-	return dmacHw_TRANSFER_STATUS_DONE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptors for known data length
-*
-*  When DMA has to work as a flow controller, this function prepares the
-*  descriptor chain to transfer data
-*
-*  from:
-*          - Memory to memory
-*          - Peripheral to memory
-*          - Memory to Peripheral
-*          - Peripheral to Peripheral
-*
-*  @return   -1 - On failure
-*             0 - On success
-*
-*/
-/****************************************************************************/
-int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-			     size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
-	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	dmacHw_DESC_t *pStart;
-	dmacHw_DESC_t *pProg;
-	int srcTs = 0;
-	int blkTs = 0;
-	int oddSize = 0;
-	int descCount = 0;
-	int count = 0;
-	int dstTrSize = 0;
-	int srcTrSize = 0;
-	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
-
-	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-
-	/* Skip Tx if buffer is NULL  or length is unknown */
-	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
-		/* Do not initiate transfer */
-		return -1;
-	}
-
-	/* Ensure scatter and gather are transaction aligned */
-	if ((pConfig->srcGatherWidth % srcTrSize)
-	    || (pConfig->dstScatterWidth % dstTrSize)) {
-		return -2;
-	}
-
-	/*
-	   Background 1: DMAC can not perform DMA if source and destination addresses are
-	   not properly aligned with the channel's transaction width. So, for successful
-	   DMA transfer, transaction width must be set according to the alignment of the
-	   source and destination address.
-	 */
-
-	/* Adjust destination transaction width if destination address is not aligned properly */
-	dstTrWidth = pConfig->dstMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
-		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
-		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
-	}
-
-	/* Adjust source transaction width if source address is not aligned properly */
-	srcTrWidth = pConfig->srcMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
-		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
-		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
-	}
-
-	/* Find the maximum transaction per descriptor */
-	if (pConfig->maxDataPerBlock
-	    && ((pConfig->maxDataPerBlock / srcTrSize) <
-		dmacHw_MAX_BLOCKSIZE)) {
-		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
-	}
-
-	/* Find number of source transactions needed to complete the DMA transfer */
-	srcTs = dataLen / srcTrSize;
-	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
-	if (srcTs && (dstTrSize > srcTrSize)) {
-		oddSize = dataLen % dstTrSize;
-		/* Adjust source transaction count due to "oddSize" */
-		srcTs = srcTs - (oddSize / srcTrSize);
-	} else {
-		oddSize = dataLen % srcTrSize;
-	}
-	/* Adjust "descCount" due to "oddSize" */
-	if (oddSize) {
-		descCount++;
-	}
-	/* Find the number of descriptor needed for total "srcTs" */
-	if (srcTs) {
-		descCount += ((srcTs - 1) / maxBlockSize) + 1;
-	}
-
-	/* Check the availability of "descCount" discriptors in the ring */
-	pProg = pRing->pHead;
-	for (count = 0; (descCount <= pRing->num) && (count < descCount);
-	     count++) {
-		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
-			/* Sufficient descriptors are not available */
-			return -3;
-		}
-		pProg = (dmacHw_DESC_t *) pProg->llp;
-	}
-
-	/* Remember the link list item to program the channel registers */
-	pStart = pProg = pRing->pHead;
-	/* Make a link list with "descCount(=count)" number of descriptors */
-	while (count) {
-		/* Reset channel control information */
-		pProg->ctl.lo = 0;
-		/* Enable source gather if configured */
-		if (pConfig->srcGatherWidth) {
-			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
-		}
-		/* Enable destination scatter if configured */
-		if (pConfig->dstScatterWidth) {
-			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
-		}
-		/* Set source and destination address */
-		pProg->sar = (uint32_t) pSrcAddr;
-		pProg->dar = (uint32_t) pDstAddr;
-		/* Use "devCtl" to mark that user memory need to be freed later if needed */
-		if (pProg == pRing->pHead) {
-			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
-		} else {
-			pProg->devCtl = 0;
-		}
-
-		blkTs = srcTs;
-
-		/* Special treatmeant for last descriptor */
-		if (count == 1) {
-			/* Mark the last descriptor */
-			pProg->ctl.lo &=
-			    ~(dmacHw_REG_CTL_LLP_DST_EN |
-			      dmacHw_REG_CTL_LLP_SRC_EN);
-			/* Treatment for odd data bytes */
-			if (oddSize) {
-				/* Adjust for single byte transaction width */
-				switch (pConfig->transferType) {
-				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-					dstTrWidth =
-					    dmacHw_DST_TRANSACTION_WIDTH_8;
-					blkTs =
-					    (oddSize / srcTrSize) +
-					    ((oddSize % srcTrSize) ? 1 : 0);
-					break;
-				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-					srcTrWidth =
-					    dmacHw_SRC_TRANSACTION_WIDTH_8;
-					blkTs = oddSize;
-					break;
-				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
-					srcTrWidth =
-					    dmacHw_SRC_TRANSACTION_WIDTH_8;
-					dstTrWidth =
-					    dmacHw_DST_TRANSACTION_WIDTH_8;
-					blkTs = oddSize;
-					break;
-				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
-					/* Do not adjust the transaction width  */
-					break;
-				}
-			} else {
-				srcTs -= blkTs;
-			}
-		} else {
-			if (srcTs / maxBlockSize) {
-				blkTs = maxBlockSize;
-			}
-			/* Remaining source transactions for next iteration */
-			srcTs -= blkTs;
-		}
-		/* Must have a valid source transactions */
-		dmacHw_ASSERT(blkTs > 0);
-		/* Set control information */
-		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
-			pProg->ctl.lo |= pConfig->transferType |
-			    pConfig->srcUpdate |
-			    pConfig->dstUpdate |
-			    srcTrWidth |
-			    dstTrWidth |
-			    pConfig->srcMaxBurstWidth |
-			    pConfig->dstMaxBurstWidth |
-			    pConfig->srcMasterInterface |
-			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-		} else {
-			uint32_t transferType = 0;
-			switch (pConfig->transferType) {
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
-				break;
-			default:
-				dmacHw_ASSERT(0);
-			}
-			pProg->ctl.lo |= transferType |
-			    pConfig->srcUpdate |
-			    pConfig->dstUpdate |
-			    srcTrWidth |
-			    dstTrWidth |
-			    pConfig->srcMaxBurstWidth |
-			    pConfig->dstMaxBurstWidth |
-			    pConfig->srcMasterInterface |
-			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-		}
-
-		/* Set block transaction size */
-		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
-		/* Look for next descriptor */
-		if (count > 1) {
-			/* Point to the next descriptor */
-			pProg = (dmacHw_DESC_t *) pProg->llp;
-
-			/* Update source and destination address for next iteration */
-			switch (pConfig->transferType) {
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-				if (pConfig->dstScatterWidth) {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->dstScatterWidth) *
-					     pConfig->dstScatterJump);
-				} else {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-				if (pConfig->srcGatherWidth) {
-					pSrcAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->srcGatherWidth) *
-					     pConfig->srcGatherJump);
-				} else {
-					pSrcAddr =
-					    (char *)pSrcAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
-				if (pConfig->dstScatterWidth) {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->dstScatterWidth) *
-					     pConfig->dstScatterJump);
-				} else {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize;
-				}
-
-				if (pConfig->srcGatherWidth) {
-					pSrcAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->srcGatherWidth) *
-					     pConfig->srcGatherJump);
-				} else {
-					pSrcAddr =
-					    (char *)pSrcAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
-				/* Do not adjust the address */
-				break;
-			default:
-				dmacHw_ASSERT(0);
-			}
-		} else {
-			/* At the end of transfer "srcTs" must be zero */
-			dmacHw_ASSERT(srcTs == 0);
-		}
-		count--;
-	}
-
-	/* Remember the descriptor to initialize the registers */
-	if (pRing->pProg == dmacHw_DESC_INIT) {
-		pRing->pProg = pStart;
-	}
-	/* Indicate that the descriptor is updated */
-	pRing->pEnd = pProg;
-	/* Head pointing to the next descriptor */
-	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
-	/* Update Tail pointer if destination is a peripheral,
-	   because no one is going to read from the pTail
-	 */
-	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-		pRing->pTail = pRing->pHead;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Provides DMA controller attributes
-*
-*
-*  @return  DMA controller attributes
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	switch (attr) {
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
-		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
-		return (1 <<
-			 (dmacHw_GET_MAX_BLOCK_SIZE
-			  (pCblk->module, pCblk->module) + 2)) - 8;
-	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
-		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
-		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
-							   pCblk->channel);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
-		return GetFifoSize(handle);
-	}
-	dmacHw_ASSERT(0);
-	return 0;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,1017 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_extra.c
-*
-*  @brief   Extra Low level DMA controller driver routines
-*
-*  @note
-*
-*   These routines provide basic DMA functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-#include <stddef.h>
-
-#include <csp/dmacHw.h>
-#include <mach/csp/dmacHw_reg.h>
-#include <mach/csp/dmacHw_priv.h>
-
-extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
-
-/* ---- External Function Prototypes ------------------------------------- */
-
-/* ---- Internal Use Function Prototypes --------------------------------- */
-/****************************************************************************/
-/**
-*  @brief   Overwrites data length in the descriptor
-*
-*  This function overwrites data length in the descriptor
-*
-*
-*  @return   void
-*
-*  @note
-*          This is only used for PCM channel
-*/
-/****************************************************************************/
-void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			  size_t dataLen	/*   [ IN ] Data length in bytes */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Helper function to display DMA registers
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
-				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
-				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
-    ) {
-	int chan;
-
-	(*fpPrint) ("Displaying register content \n\n");
-	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
-	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
-	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: misc config                         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
-	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
-	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
-	(*fpPrint) ("Module %d: misc test                           0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
-
-	if (channel == -1) {
-		for (chan = 0; chan < 8; chan++) {
-			(*fpPrint)
-			    ("--------------------------------------------------\n");
-			(*fpPrint)
-			    ("Module %d: Channel %d Source                   0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Destination              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d LLP                      0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Control (LO)             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Control (HI)             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Source Stats             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Dest Stats               0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Config (LO)              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Config (HI)              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
-		}
-	} else {
-		chan = channel;
-		(*fpPrint)
-		    ("--------------------------------------------------\n");
-		(*fpPrint)
-		    ("Module %d: Channel %d Source                   0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Destination              0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d LLP                      0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Control (LO)             0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Control (HI)             0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Source Stats             0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Dest Stats               0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Config (LO)              0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Config (HI)              0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Helper function to display descriptor ring
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	dmacHw_DESC_t *pStart;
-
-	if (pRing->pHead == NULL) {
-		return;
-	}
-
-	pStart = pRing->pHead;
-
-	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
-		if (pStart == pRing->pHead) {
-			(*fpPrint) ("Head\n");
-		}
-		if (pStart == pRing->pTail) {
-			(*fpPrint) ("Tail\n");
-		}
-		if (pStart == pRing->pProg) {
-			(*fpPrint) ("Prog\n");
-		}
-		if (pStart == pRing->pEnd) {
-			(*fpPrint) ("End\n");
-		}
-		if (pStart == pRing->pFree) {
-			(*fpPrint) ("Free\n");
-		}
-		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
-		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
-		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
-		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
-		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
-		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
-		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
-		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
-		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
-
-		pStart = (dmacHw_DESC_t *) pStart->llp;
-	}
-	if (pStart == pRing->pHead) {
-		(*fpPrint) ("Head\n");
-	}
-	if (pStart == pRing->pTail) {
-		(*fpPrint) ("Tail\n");
-	}
-	if (pStart == pRing->pProg) {
-		(*fpPrint) ("Prog\n");
-	}
-	if (pStart == pRing->pEnd) {
-		(*fpPrint) ("End\n");
-	}
-	if (pStart == pRing->pFree) {
-		(*fpPrint) ("Free\n");
-	}
-	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
-	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
-	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
-	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
-	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
-	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
-	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
-	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
-	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Check if DMA channel is the flow controller
-*
-*  @return  1 : If DMA is a flow controller
-*           0 : Peripheral is the flow controller
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	uint32_t ttfc =
-	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
-	    lo & dmacHw_REG_CTL_TTFC_MASK;
-
-	switch (ttfc) {
-	case dmacHw_REG_CTL_TTFC_MM_DMAC:
-	case dmacHw_REG_CTL_TTFC_MP_DMAC:
-	case dmacHw_REG_CTL_TTFC_PM_DMAC:
-	case dmacHw_REG_CTL_TTFC_PP_DMAC:
-		return 1;
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Overwrites data length in the descriptor
-*
-*  This function overwrites data length in the descriptor
-*
-*
-*  @return   void
-*
-*  @note
-*          This is only used for PCM channel
-*/
-/****************************************************************************/
-void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			  size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	dmacHw_DESC_t *pProg;
-	dmacHw_DESC_t *pHead;
-	int srcTs = 0;
-	int srcTrSize = 0;
-
-	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
-	pProg = pHead;
-
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-	srcTs = dataLen / srcTrSize;
-	do {
-		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
-		pProg = (dmacHw_DESC_t *) pProg->llp;
-	} while (pProg != pHead);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the DMA channel specific interrupt
-*
-*
-*  @return   void
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Returns the cause of channel specific DMA interrupt
-*
-*  This function returns the cause of interrupt
-*
-*  @return  Interrupt status, each bit representing a specific type of interrupt
-*
-*  @note
-*     Should be called under the context of ISR
-*/
-/****************************************************************************/
-dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
-
-	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_TRANS;
-	}
-	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
-	}
-	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_ERROR;
-	}
-
-	return status;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a DMA channel causing interrupt
-*
-*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
-*
-*  @return  NULL   : No channel causing DMA interrupt
-*           ! NULL : Handle to a channel causing DMA interrupt
-*  @note
-*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
-{
-	uint32_t i;
-
-	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
-		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
-		     ((0x00000001 << dmacHw_gCblk[i].channel)))
-		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
-			((0x00000001 << dmacHw_gCblk[i].channel)))
-		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
-			((0x00000001 << dmacHw_gCblk[i].channel)))
-		    ) {
-			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
-		}
-	}
-	return dmacHw_CBLK_TO_HANDLE(NULL);
-}
-
-/****************************************************************************/
-/**
-*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
-*
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor count
-*
-*
-*/
-/****************************************************************************/
-int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-				    size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	int srcTs = 0;
-	int oddSize = 0;
-	int descCount = 0;
-	int dstTrSize = 0;
-	int srcTrSize = 0;
-	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
-	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
-	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
-
-	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-
-	/* Skip Tx if buffer is NULL  or length is unknown */
-	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
-		/* Do not initiate transfer */
-		return -1;
-	}
-
-	/* Ensure scatter and gather are transaction aligned */
-	if (pConfig->srcGatherWidth % srcTrSize
-	    || pConfig->dstScatterWidth % dstTrSize) {
-		return -1;
-	}
-
-	/*
-	   Background 1: DMAC can not perform DMA if source and destination addresses are
-	   not properly aligned with the channel's transaction width. So, for successful
-	   DMA transfer, transaction width must be set according to the alignment of the
-	   source and destination address.
-	 */
-
-	/* Adjust destination transaction width if destination address is not aligned properly */
-	dstTrWidth = pConfig->dstMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
-		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
-		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
-	}
-
-	/* Adjust source transaction width if source address is not aligned properly */
-	srcTrWidth = pConfig->srcMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
-		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
-		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
-	}
-
-	/* Find the maximum transaction per descriptor */
-	if (pConfig->maxDataPerBlock
-	    && ((pConfig->maxDataPerBlock / srcTrSize) <
-		dmacHw_MAX_BLOCKSIZE)) {
-		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
-	}
-
-	/* Find number of source transactions needed to complete the DMA transfer */
-	srcTs = dataLen / srcTrSize;
-	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
-	if (srcTs && (dstTrSize > srcTrSize)) {
-		oddSize = dataLen % dstTrSize;
-		/* Adjust source transaction count due to "oddSize" */
-		srcTs = srcTs - (oddSize / srcTrSize);
-	} else {
-		oddSize = dataLen % srcTrSize;
-	}
-	/* Adjust "descCount" due to "oddSize" */
-	if (oddSize) {
-		descCount++;
-	}
-
-	/* Find the number of descriptor needed for total "srcTs" */
-	if (srcTs) {
-		descCount += ((srcTs - 1) / maxBlockSize) + 1;
-	}
-
-	return descCount;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Check the existence of pending descriptor
-*
-*  This function confirmes if there is any pending descriptor in the chain
-*  to program the channel
-*
-*  @return  1 : Channel need to be programmed with pending descriptor
-*           0 : No more pending descriptor to programe the channel
-*
-*  @note
-*     - This function should be called from ISR in case there are pending
-*       descriptor to program the channel.
-*
-*     Example:
-*
-*     dmac_isr ()
-*     {
-*         ...
-*         if (dmacHw_descriptorPending (handle))
-*         {
-*            dmacHw_initiateTransfer (handle);
-*         }
-*     }
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	/* Make sure channel is not busy */
-	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		/* Check if pEnd is not processed */
-		if (pRing->pEnd) {
-			/* Something left for processing */
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to stop transfer
-*
-*  Ensures the channel is not doing any transfer after calling this function
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk;
-
-	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	/* Stop the channel */
-	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Deallocates source or destination memory, allocated
-*
-*  This function can be called to deallocate data memory that was DMAed successfully
-*
-*  @return  On failure : -1
-*           On success : Number of buffer freed
-*
-*  @note
-*     This function will be called ONLY, when source OR destination address is pointing
-*     to dynamic memory
-*/
-/****************************************************************************/
-int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	uint32_t count = 0;
-
-	if (fpFree == NULL) {
-		return -1;
-	}
-
-	while ((pRing->pFree != pRing->pTail)
-	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
-		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
-			/* Identify, which memory to free */
-			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-				(*fpFree) ((void *)pRing->pFree->dar);
-			} else {
-				/* Destination was a peripheral */
-				(*fpFree) ((void *)pRing->pFree->sar);
-			}
-			/* Unmark user memory to indicate it is freed */
-			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
-		}
-		dmacHw_NEXT_DESC(pRing, pFree);
-
-		count++;
-	}
-
-	return count;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
-*
-*  This function will update the discriptor ring by allocating buffers, when source peripheral
-*  has to work as a flow controller to transfer data from:
-*           - Peripheral to memory.
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor updated
-*
-*
-*  @note
-*     Channel must be configured for peripheral to memory transfer
-*
-*/
-/****************************************************************************/
-int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
-				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
-				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
-				     int num	/*   [ IN ] Number of descriptor to set */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_DESC_t *pProg = NULL;
-	dmacHw_DESC_t *pLast = NULL;
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	uint32_t dstAddr;
-	uint32_t controlParam;
-	int i;
-
-	dmacHw_ASSERT(pConfig->transferType ==
-		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
-
-	if (num > pRing->num) {
-		return -1;
-	}
-
-	pLast = pRing->pEnd;	/* Last descriptor updated */
-	pProg = pRing->pHead;	/* First descriptor in the new list */
-
-	controlParam = pConfig->srcUpdate |
-	    pConfig->dstUpdate |
-	    pConfig->srcMaxTransactionWidth |
-	    pConfig->dstMaxTransactionWidth |
-	    pConfig->srcMasterInterface |
-	    pConfig->dstMasterInterface |
-	    pConfig->srcMaxBurstWidth |
-	    pConfig->dstMaxBurstWidth |
-	    dmacHw_REG_CTL_TTFC_PM_PERI |
-	    dmacHw_REG_CTL_LLP_DST_EN |
-	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
-
-	for (i = 0; i < num; i++) {
-		/* Allocate Rx buffer only for idle descriptor */
-		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
-		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
-		    ) {
-			/* Rx descriptor is not idle */
-			break;
-		}
-		/* Set source address */
-		pRing->pHead->sar = srcAddr;
-		if (fpAlloc) {
-			/* Allocate memory for buffer in descriptor */
-			dstAddr = (uint32_t) (*fpAlloc) (len);
-			/* Check the destination address */
-			if (dstAddr == 0) {
-				if (i == 0) {
-					/* Not a single descriptor is available */
-					return -1;
-				}
-				break;
-			}
-			/* Set destination address */
-			pRing->pHead->dar = dstAddr;
-		}
-		/* Set control information */
-		pRing->pHead->ctl.lo = controlParam;
-		/* Use "devCtl" to mark the memory that need to be freed later */
-		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
-		/* Descriptor is now owned by the channel */
-		pRing->pHead->ctl.hi = 0;
-		/* Remember the descriptor last updated */
-		pRing->pEnd = pRing->pHead;
-		/* Update next descriptor */
-		dmacHw_NEXT_DESC(pRing, pHead);
-	}
-
-	/* Mark the end of the list */
-	pRing->pEnd->ctl.lo &=
-	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
-	/* Connect the list */
-	if (pLast != pProg) {
-		pLast->ctl.lo |=
-		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
-	}
-	/* Mark the descriptors are updated */
-	pCblk->descUpdated = 1;
-	if (!pCblk->varDataStarted) {
-		/* LLP must be pointing to the first descriptor */
-		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
-			       (uint32_t) pProg - pRing->virt2PhyOffset);
-		/* Channel, handling variable data started */
-		pCblk->varDataStarted = 1;
-	}
-
-	return i;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Read data DMAed to memory
-*
-*  This function will read data that has been DMAed to memory while transferring from:
-*          - Memory to memory
-*          - Peripheral to memory
-*
-*  @param    handle     -
-*  @param    ppBbuf     -
-*  @param    pLen       -
-*
-*  @return  0 - No more data is available to read
-*           1 - More data might be available to read
-*
-*/
-/****************************************************************************/
-int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
-			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			       void **ppBbuf,	/*   [ OUT ] Data received */
-			       size_t *pLlen	/*   [ OUT ] Length of the data received */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	(void)handle;
-
-	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
-		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
-		    (pRing->pTail == pRing->pHead)
-		    ) {
-			/* No receive data available */
-			*ppBbuf = (char *)NULL;
-			*pLlen = 0;
-
-			return 0;
-		}
-	}
-
-	/* Return read buffer and length */
-	*ppBbuf = (char *)pRing->pTail->dar;
-
-	/* Extract length of the received data */
-	if (DmaIsFlowController(pDescriptor)) {
-		uint32_t srcTrSize = 0;
-
-		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
-			srcTrSize = 1;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
-			srcTrSize = 2;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
-			srcTrSize = 4;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
-			srcTrSize = 8;
-			break;
-		default:
-			dmacHw_ASSERT(0);
-		}
-		/* Calculate length from the block size */
-		*pLlen =
-		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
-		    srcTrSize;
-	} else {
-		/* Extract length from the source peripheral */
-		*pLlen = pRing->pTail->sstat;
-	}
-
-	/* Advance tail to next descriptor */
-	dmacHw_NEXT_DESC(pRing, pTail);
-
-	return 1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptor carrying control information
-*
-*  This function will be used to send specific control information to the device
-*  using the DMA channel
-*
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
-				uint32_t control	/*   [ IN ] Device control information */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	if (ctlAddress == 0) {
-		return -1;
-	}
-
-	/* Check the availability of descriptors in the ring */
-	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
-		return -1;
-	}
-	/* Set control information */
-	pRing->pHead->devCtl = control;
-	/* Set source and destination address */
-	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
-	pRing->pHead->dar = ctlAddress;
-	/* Set control parameters */
-	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
-		pRing->pHead->ctl.lo = pConfig->transferType |
-		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
-		    pConfig->dstMaxTransactionWidth |
-		    dmacHw_SRC_BURST_WIDTH_0 |
-		    dmacHw_DST_BURST_WIDTH_0 |
-		    pConfig->srcMasterInterface |
-		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-	} else {
-		uint32_t transferType = 0;
-		switch (pConfig->transferType) {
-		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
-			break;
-		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
-			break;
-		default:
-			dmacHw_ASSERT(0);
-		}
-		pRing->pHead->ctl.lo = transferType |
-		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
-		    pConfig->dstMaxTransactionWidth |
-		    dmacHw_SRC_BURST_WIDTH_0 |
-		    dmacHw_DST_BURST_WIDTH_0 |
-		    pConfig->srcMasterInterface |
-		    pConfig->dstMasterInterface |
-		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
-	}
-
-	/* Set block transaction size to one 32 bit transaction */
-	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
-
-	/* Remember the descriptor to initialize the registers */
-	if (pRing->pProg == dmacHw_DESC_INIT) {
-		pRing->pProg = pRing->pHead;
-	}
-	pRing->pEnd = pRing->pHead;
-
-	/* Advance the descriptor */
-	dmacHw_NEXT_DESC(pRing, pHead);
-
-	/* Update Tail pointer if destination is a peripheral */
-	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-		pRing->pTail = pRing->pHead;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Sets channel specific user data
-*
-*  This function associates user data to a specific DMA channel
-*
-*/
-/****************************************************************************/
-void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			       void *userData	/*  [ IN ] User data */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	pCblk->userData = userData;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets channel specific user data
-*
-*  This function returns user data specific to a DMA channel
-*
-*  @return   user data
-*/
-/****************************************************************************/
-void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	return pCblk->userData;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Resets descriptor control information
-*
-*  @return  void
-*/
-/****************************************************************************/
-void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    ) {
-	int i;
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pDesc;
-
-	pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	pDesc = pRing->pHead;
-
-	for (i = 0; i < pRing->num; i++) {
-		/* Mark descriptor is ready to use */
-		pDesc->ctl.hi = dmacHw_DESC_FREE;
-		/* Look into next link list item */
-		pDesc++;
-	}
-	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
-	pRing->pProg = dmacHw_DESC_INIT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Displays channel specific registers and other control parameters
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
-	DisplayDescRing(pDescriptor, fpPrint);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/dmac/Makefile linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/dmac/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/dmac/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/dmac/Makefile	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/Makefile linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/Makefile	1969-12-31 19:00:00.000000000 -0500
@@ -1,3 +0,0 @@
-obj-y += dmac/
-obj-y += tmr/
-obj-y += chipc/
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/tmr/Makefile linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/tmr/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/tmr/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/tmr/Makefile	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-obj-y += tmrHw.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/tmr/tmrHw.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/csp/tmr/tmrHw.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/csp/tmr/tmrHw.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,576 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw.c
-*
-*  @brief   Low level Timer driver routines
-*
-*  @note
-*
-*   These routines provide basic timer functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-
-#include <csp/tmrHw.h>
-#include <mach/csp/tmrHw_reg.h>
-
-#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
-#define tmrHw_MILLISEC_PER_SEC              (1000)
-
-#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
-#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
-#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
-#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
-#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
-#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
-
-#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
-#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
-#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
-#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
-#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
-#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
-
-static void ResetTimer(tmrHw_ID_t timerId)
-    __attribute__ ((section(".aramtext")));
-static int tmrHw_divide(int num, int denom)
-    __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Get timer capability
-*
-*  This function returns various capabilities/attributes of a timer
-*
-*  @return  Capability
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
-) {
-	switch (capability) {
-	case tmrHw_CAPABILITY_CLOCK:
-		return (timerId <=
-			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
-		    tmrHw_HIGH_RESOLUTION_CLOCK;
-	case tmrHw_CAPABILITY_RESOLUTION:
-		return 32;
-	default:
-		return 0;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Resets a timer
-*
-*  This function initializes  timer
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
-) {
-	/* Reset timer */
-	pTmrHw[timerId].LoadValue = 0;
-	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
-	pTmrHw[timerId].Control = 0;
-	pTmrHw[timerId].BackgroundLoad = 0;
-	/* Always configure as a 32 bit timer */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
-	/* Clear interrupt only if raw status interrupt is set */
-	if (pTmrHw[timerId].RawInterruptStatus) {
-		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Sets counter value for an interval in ms
-*
-*  @return   On success: Effective counter value set
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	uint32_t scale = 0;
-	uint32_t count = 0;
-
-	if (timerId == 0 || timerId == 1) {
-		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
-		} else {
-			return 0;
-		}
-
-		count = msec * scale;
-		/* Set counter value */
-		pTmrHw[timerId].LoadValue = count;
-		pTmrHw[timerId].BackgroundLoad = count;
-
-	} else if (timerId == 2 || timerId == 3) {
-		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
-		} else {
-			return 0;
-		}
-
-		count = msec * scale;
-		/* Set counter value */
-		pTmrHw[timerId].LoadValue = count;
-		pTmrHw[timerId].BackgroundLoad = count;
-	}
-	return count / scale;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer in terms of timer interrupt rate
-*
-*  This function initializes a periodic timer to generate specific number of
-*  timer interrupt per second
-*
-*  @return   On success: Effective timer frequency
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
-) {
-	uint32_t resolution = 0;
-	uint32_t count = 0;
-	ResetTimer(timerId);
-
-	/* Set timer mode periodic */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-	/* Set timer in highest resolution */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-
-	if (rate && (timerId == 0 || timerId == 1)) {
-		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
-			return 0;
-		}
-		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
-	} else if (rate && (timerId == 2 || timerId == 3)) {
-		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
-			return 0;
-		} else {
-			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
-		}
-	} else {
-		return 0;
-	}
-	/* Find the counter value */
-	count = resolution / rate;
-	/* Set counter value */
-	pTmrHw[timerId].LoadValue = count;
-	pTmrHw[timerId].BackgroundLoad = count;
-
-	return resolution / count;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt after
-*           certain time interval
-*
-*  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in millisecond
-*
-*  @return   On success: Effective interval set in milli-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	ResetTimer(timerId);
-
-	/* Set timer mode periodic */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-
-	return SetTimerPeriod(timerId, msec);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt just once
-*           after certain time interval
-*
-*  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in millisecond
-*
-*  @return   On success: Effective interval set in milli-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	ResetTimer(timerId);
-
-	/* Set timer mode oneshot */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
-
-	return SetTimerPeriod(timerId, msec);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a timer to run as a free running timer
-*
-*  This function initializes a timer to run as a free running timer
-*
-*  @return   Timer resolution (count / sec)
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
-) {
-	uint32_t scale = 0;
-
-	ResetTimer(timerId);
-	/* Set timer as free running mode */
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-
-	if (divider >= 64) {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-		scale = 256;
-	} else if (divider >= 8) {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-		scale = 16;
-	} else {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-		scale = 1;
-	}
-
-	if (timerId == 0 || timerId == 1) {
-		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
-	} else if (timerId == 2 || timerId == 3) {
-		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Starts a timer
-*
-*  This function starts a preconfigured timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*/
-/****************************************************************************/
-int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Stops a timer
-*
-*  This function stops a running timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*/
-/****************************************************************************/
-int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets current timer count
-*
-*  This function returns the current timer value
-*
-*  @return  Current downcounting timer value
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	/* return 32 bit timer value */
-	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
-	case tmrHw_CONTROL_FREE_RUNNING:
-		if (pTmrHw[timerId].CurrentValue) {
-			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
-		}
-		break;
-	case tmrHw_CONTROL_PERIODIC:
-	case tmrHw_CONTROL_ONESHOT:
-		return pTmrHw[timerId].BackgroundLoad -
-		    pTmrHw[timerId].CurrentValue;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets timer count rate
-*
-*  This function returns the number of counts per second
-*
-*  @return  Count rate
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	uint32_t divider = 0;
-
-	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
-	case tmrHw_CONTROL_PRESCALE_1:
-		divider = 1;
-		break;
-	case tmrHw_CONTROL_PRESCALE_16:
-		divider = 16;
-		break;
-	case tmrHw_CONTROL_PRESCALE_256:
-		divider = 256;
-		break;
-	default:
-		tmrHw_ASSERT(0);
-	}
-
-	if (timerId == 0 || timerId == 1) {
-		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
-	} else {
-		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables timer interrupt
-*
-*  This function enables the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables timer interrupt
-*
-*  This function disable the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the timer interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].InterruptClear = 0x1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets the interrupt status
-*
-*  This function returns timer interrupt status
-*
-*  @return   Interrupt status
-*/
-/****************************************************************************/
-tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	if (pTmrHw[timerId].InterruptStatus) {
-		return tmrHw_INTERRUPT_STATUS_SET;
-	} else {
-		return tmrHw_INTERRUPT_STATUS_UNSET;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a timer causing interrupt
-*
-*  This functions returns a timer causing interrupt
-*
-*  @return  0xFFFFFFFF   : No timer causing an interrupt
-*           ! 0xFFFFFFFF : timer causing an interrupt
-*  @note
-*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
-*/
-/****************************************************************************/
-tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
-) {
-	int i;
-
-	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
-		if (pTmrHw[i].InterruptStatus) {
-			return i;
-		}
-	}
-
-	return 0xFFFFFFFF;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Displays specific timer registers
-*
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-) {
-	(*fpPrint) ("Displaying register contents \n\n");
-	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
-		    pTmrHw[timerId].LoadValue);
-	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
-		    pTmrHw[timerId].BackgroundLoad);
-	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
-		    pTmrHw[timerId].Control);
-	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
-		    pTmrHw[timerId].InterruptClear);
-	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
-		    pTmrHw[timerId].RawInterruptStatus);
-	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
-		    pTmrHw[timerId].InterruptStatus);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-		  unsigned long usecs /*  [ IN ] usec to delay */
-) {
-	tmrHw_RATE_t usec_tick_rate;
-	tmrHw_COUNT_t start_time;
-	tmrHw_COUNT_t delta_time;
-
-	start_time = tmrHw_GetCurrentCount(timerId);
-	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
-	delta_time = usecs * usec_tick_rate;
-
-	/* Busy wait */
-	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
-		;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Local Divide function
-*
-*  This function does the divide
-*
-*  @return divide value
-*
-*/
-/****************************************************************************/
-static int tmrHw_divide(int num, int denom)
-{
-	int r;
-	int t = 1;
-
-	/* Shift denom and t up to the largest value to optimize algorithm */
-	/* t contains the units of each divide */
-	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
-		denom = denom << 1;
-		t = t << 1;
-	}
-
-	/* Initialize the result */
-	r = 0;
-
-	do {
-		/* Determine if there exists a positive remainder */
-		if ((num - denom) >= 0) {
-			/* Accumlate t to the result and calculate a new remainder */
-			num = num - denom;
-			r = r + t;
-		}
-		/* Continue to shift denom and shift t down to 0 */
-		denom = denom >> 1;
-		t = t >> 1;
-	} while (t != 0);
-	return r;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/dma.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/dma.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/dma.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/dma.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,1518 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma.c
-*
-*   @brief  Implements the DMA interface.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/irqreturn.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-
-#include <mach/timer.h>
-
-#include <linux/pfn.h>
-#include <linux/atomic.h>
-#include <mach/dma.h>
-
-/* ---- Public Variables ------------------------------------------------- */
-
-/* ---- Private Constants and Types -------------------------------------- */
-
-#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
-
-#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
-#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
-
-
-/* ---- Private Variables ------------------------------------------------ */
-
-static DMA_Global_t gDMA;
-static struct proc_dir_entry *gDmaDir;
-
-#include "dma_device.c"
-
-/* ---- Private Function Prototypes -------------------------------------- */
-
-/* ---- Functions  ------------------------------------------------------- */
-
-/****************************************************************************/
-/**
-*   Displays information for /proc/dma/channels
-*/
-/****************************************************************************/
-
-static int dma_proc_read_channels(char *buf, char **start, off_t offset,
-				  int count, int *eof, void *data)
-{
-	int controllerIdx;
-	int channelIdx;
-	int limit = count - 200;
-	int len = 0;
-	DMA_Channel_t *channel;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			if (len >= limit) {
-				break;
-			}
-
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			len +=
-			    sprintf(buf + len, "%d:%d ", controllerIdx,
-				    channelIdx);
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
-			    0) {
-				len +=
-				    sprintf(buf + len, "Dedicated for %s ",
-					    DMA_gDeviceAttribute[channel->
-								 devType].name);
-			} else {
-				len += sprintf(buf + len, "Shared ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
-				len += sprintf(buf + len, "No ISR ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
-				len += sprintf(buf + len, "Fifo: 128 ");
-			} else {
-				len += sprintf(buf + len, "Fifo: 64  ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
-				len +=
-				    sprintf(buf + len, "InUse by %s",
-					    DMA_gDeviceAttribute[channel->
-								 devType].name);
-#if (DMA_DEBUG_TRACK_RESERVATION)
-				len +=
-				    sprintf(buf + len, " (%s:%d)",
-					    channel->fileName,
-					    channel->lineNum);
-#endif
-			} else {
-				len += sprintf(buf + len, "Avail ");
-			}
-
-			if (channel->lastDevType != DMA_DEVICE_NONE) {
-				len +=
-				    sprintf(buf + len, "Last use: %s ",
-					    DMA_gDeviceAttribute[channel->
-								 lastDevType].
-					    name);
-			}
-
-			len += sprintf(buf + len, "\n");
-		}
-	}
-	up(&gDMA.lock);
-	*eof = 1;
-
-	return len;
-}
-
-/****************************************************************************/
-/**
-*   Displays information for /proc/dma/devices
-*/
-/****************************************************************************/
-
-static int dma_proc_read_devices(char *buf, char **start, off_t offset,
-				 int count, int *eof, void *data)
-{
-	int limit = count - 200;
-	int len = 0;
-	int devIdx;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
-		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
-
-		if (devAttr->name == NULL) {
-			continue;
-		}
-
-		if (len >= limit) {
-			break;
-		}
-
-		len += sprintf(buf + len, "%-12s ", devAttr->name);
-
-		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-			len +=
-			    sprintf(buf + len, "Dedicated %d:%d ",
-				    devAttr->dedicatedController,
-				    devAttr->dedicatedChannel);
-		} else {
-			len += sprintf(buf + len, "Shared DMA:");
-			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
-				len += sprintf(buf + len, "0");
-			}
-			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
-				len += sprintf(buf + len, "1");
-			}
-			len += sprintf(buf + len, " ");
-		}
-		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
-			len += sprintf(buf + len, "NoISR ");
-		}
-		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
-			len += sprintf(buf + len, "Allow-128 ");
-		}
-
-		len +=
-		    sprintf(buf + len,
-			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
-			    devAttr->numTransfers, devAttr->transferTicks,
-			    devAttr->transferBytes,
-			    devAttr->ring.bytesAllocated);
-
-	}
-
-	up(&gDMA.lock);
-	*eof = 1;
-
-	return len;
-}
-
-/****************************************************************************/
-/**
-*   Determines if a DMA_Device_t is "valid".
-*
-*   @return
-*       TRUE        - dma device is valid
-*       FALSE       - dma device isn't valid
-*/
-/****************************************************************************/
-
-static inline int IsDeviceValid(DMA_Device_t device)
-{
-	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
-}
-
-/****************************************************************************/
-/**
-*   Translates a DMA handle into a pointer to a channel.
-*
-*   @return
-*       non-NULL    - pointer to DMA_Channel_t
-*       NULL        - DMA Handle was invalid
-*/
-/****************************************************************************/
-
-static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
-{
-	int controllerIdx;
-	int channelIdx;
-
-	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
-	channelIdx = CHANNEL_FROM_HANDLE(handle);
-
-	if ((controllerIdx > DMA_NUM_CONTROLLERS)
-	    || (channelIdx > DMA_NUM_CHANNELS)) {
-		return NULL;
-	}
-	return &gDMA.controller[controllerIdx].channel[channelIdx];
-}
-
-/****************************************************************************/
-/**
-*   Interrupt handler which is called to process DMA interrupts.
-*/
-/****************************************************************************/
-
-static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int irqStatus;
-
-	channel = (DMA_Channel_t *) dev_id;
-
-	/* Figure out why we were called, and knock down the interrupt */
-
-	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
-	dmacHw_clearInterrupt(channel->dmacHwHandle);
-
-	if ((channel->devType < 0)
-	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
-		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
-		       channel->devType);
-		return IRQ_NONE;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	/* Update stats */
-
-	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
-		devAttr->transferTicks +=
-		    (timer_get_tick_count() - devAttr->transferStartTime);
-	}
-
-	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
-		printk(KERN_ERR
-		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
-		       channel->devType, devAttr->name);
-	} else {
-		devAttr->numTransfers++;
-		devAttr->transferBytes += devAttr->numBytes;
-	}
-
-	/* Call any installed handler */
-
-	if (devAttr->devHandler != NULL) {
-		devAttr->devHandler(channel->devType, irqStatus,
-				    devAttr->userData);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/****************************************************************************/
-/**
-*   Allocates memory to hold a descriptor ring. The descriptor ring then
-*   needs to be populated by making one or more calls to
-*   dna_add_descriptors.
-*
-*   The returned descriptor ring will be automatically initialized.
-*
-*   @return
-*       0           Descriptor ring was allocated successfully
-*       -EINVAL     Invalid parameters passed in
-*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
-			      int numDescriptors	/* Number of descriptors that need to be allocated. */
-    ) {
-	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
-
-	if ((ring == NULL) || (numDescriptors <= 0)) {
-		return -EINVAL;
-	}
-
-	ring->physAddr = 0;
-	ring->descriptorsAllocated = 0;
-	ring->bytesAllocated = 0;
-
-	ring->virtAddr = dma_alloc_writecombine(NULL,
-						     bytesToAlloc,
-						     &ring->physAddr,
-						     GFP_KERNEL);
-	if (ring->virtAddr == NULL) {
-		return -ENOMEM;
-	}
-
-	ring->bytesAllocated = bytesToAlloc;
-	ring->descriptorsAllocated = numDescriptors;
-
-	return dma_init_descriptor_ring(ring, numDescriptors);
-}
-
-EXPORT_SYMBOL(dma_alloc_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Releases the memory which was previously allocated for a descriptor ring.
-*/
-/****************************************************************************/
-
-void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
-    ) {
-	if (ring->virtAddr != NULL) {
-		dma_free_writecombine(NULL,
-				      ring->bytesAllocated,
-				      ring->virtAddr, ring->physAddr);
-	}
-
-	ring->bytesAllocated = 0;
-	ring->descriptorsAllocated = 0;
-	ring->virtAddr = NULL;
-	ring->physAddr = 0;
-}
-
-EXPORT_SYMBOL(dma_free_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Initializes a descriptor ring, so that descriptors can be added to it.
-*   Once a descriptor ring has been allocated, it may be reinitialized for
-*   use with additional/different regions of memory.
-*
-*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
-*   initialize the ring with a smaller number of descriptors. The amount
-*   of memory allocated for the descriptor ring will not be reduced, and
-*   the descriptor ring may be reinitialized later
-*
-*   @return
-*       0           Descriptor ring was initialized successfully
-*       -ENOMEM     The descriptor which was passed in has insufficient space
-*                   to hold the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
-			     int numDescriptors	/* Number of descriptors to initialize. */
-    ) {
-	if (ring->virtAddr == NULL) {
-		return -EINVAL;
-	}
-	if (dmacHw_initDescriptor(ring->virtAddr,
-				  ring->physAddr,
-				  ring->bytesAllocated, numDescriptors) < 0) {
-		printk(KERN_ERR
-		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_init_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Determines the number of descriptors which would be required for a
-*   transfer of the indicated memory region.
-*
-*   This function also needs to know which DMA device this transfer will
-*   be destined for, so that the appropriate DMA configuration can be retrieved.
-*   DMA parameters such as transfer width, and whether this is a memory-to-memory
-*   or memory-to-peripheral, etc can all affect the actual number of descriptors
-*   required.
-*
-*   @return
-*       > 0     Returns the number of descriptors required for the indicated transfer
-*       -ENODEV - Device handed in is invalid.
-*       -EINVAL Invalid parameters
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
-				   dma_addr_t srcData,	/* Place to get data to write to device */
-				   dma_addr_t dstData,	/* Pointer to device data address */
-				   size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	int numDescriptors;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
-							      (void *)srcData,
-							      (void *)dstData,
-							      numBytes);
-	if (numDescriptors < 0) {
-		printk(KERN_ERR
-		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
-		return -EINVAL;
-	}
-
-	return numDescriptors;
-}
-
-EXPORT_SYMBOL(dma_calculate_descriptor_count);
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to the descriptor ring. Note that it may take
-*   multiple descriptors for each region of memory. It is the callers
-*   responsibility to allocate a sufficiently large descriptor ring.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*       -EINVAL Invalid parameters
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
-			DMA_Device_t device,	/* DMA Device that descriptors are for */
-			dma_addr_t srcData,	/* Place to get data (memory or device) */
-			dma_addr_t dstData,	/* Place to put data (memory or device) */
-			size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	int rc;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	rc = dmacHw_setDataDescriptor(&devAttr->config,
-				      ring->virtAddr,
-				      (void *)srcData,
-				      (void *)dstData, numBytes);
-	if (rc < 0) {
-		printk(KERN_ERR
-		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
-		       rc);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_add_descriptors);
-
-/****************************************************************************/
-/**
-*   Sets the descriptor ring associated with a device.
-*
-*   Once set, the descriptor ring will be associated with the device, even
-*   across channel request/free calls. Passing in a NULL descriptor ring
-*   will release any descriptor ring currently associated with the device.
-*
-*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
-*         the descriptor ring may be released and reallocated.
-*
-*   Note: This function will release the descriptor memory for any current
-*         descriptor ring associated with this device.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	/* Free the previously allocated descriptor ring */
-
-	dma_free_descriptor_ring(&devAttr->ring);
-
-	if (ring != NULL) {
-		/* Copy in the new one */
-
-		devAttr->ring = *ring;
-	}
-
-	/* Set things up so that if dma_transfer is called then this descriptor */
-	/* ring will get freed. */
-
-	devAttr->prevSrcData = 0;
-	devAttr->prevDstData = 0;
-	devAttr->prevNumBytes = 0;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_set_device_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Retrieves the descriptor ring associated with a device.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	memset(ring, 0, sizeof(*ring));
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	*ring = devAttr->ring;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_get_device_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Configures a DMA channel.
-*
-*   @return
-*       >= 0    - Initialization was successful.
-*
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-static int ConfigChannel(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int controllerIdx;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
-
-	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
-		if (devAttr->config.transferType ==
-		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
-			devAttr->config.dstPeripheralPort =
-			    devAttr->dmacPort[controllerIdx];
-		} else if (devAttr->config.transferType ==
-			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
-			devAttr->config.srcPeripheralPort =
-			    devAttr->dmacPort[controllerIdx];
-		}
-	}
-
-	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
-		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*   Initializes all of the data structures associated with the DMA.
-*   @return
-*       >= 0    - Initialization was successful.
-*
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_init(void)
-{
-	int rc = 0;
-	int controllerIdx;
-	int channelIdx;
-	DMA_Device_t devIdx;
-	DMA_Channel_t *channel;
-	DMA_Handle_t dedicatedHandle;
-
-	memset(&gDMA, 0, sizeof(gDMA));
-
-	sema_init(&gDMA.lock, 0);
-	init_waitqueue_head(&gDMA.freeChannelQ);
-
-	/* Initialize the Hardware */
-
-	dmacHw_initDma();
-
-	/* Start off by marking all of the DMA channels as shared. */
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			channel->flags = 0;
-			channel->devType = DMA_DEVICE_NONE;
-			channel->lastDevType = DMA_DEVICE_NONE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-			channel->fileName = "";
-			channel->lineNum = 0;
-#endif
-
-			channel->dmacHwHandle =
-			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
-						    (controllerIdx,
-						     channelIdx));
-			dmacHw_initChannel(channel->dmacHwHandle);
-		}
-	}
-
-	/* Record any special attributes that channels may have */
-
-	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-
-	/* Now walk through and record the dedicated channels. */
-
-	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
-		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
-
-		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
-		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
-			printk(KERN_ERR
-			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
-			       devAttr->name);
-			rc = -EINVAL;
-			goto out;
-		}
-
-		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-			/* This is a dedicated device. Mark the channel as being reserved. */
-
-			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
-				printk(KERN_ERR
-				       "DMA Device: %s DMA Controller %d is out of range\n",
-				       devAttr->name,
-				       devAttr->dedicatedController);
-				rc = -EINVAL;
-				goto out;
-			}
-
-			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
-				printk(KERN_ERR
-				       "DMA Device: %s DMA Channel %d is out of range\n",
-				       devAttr->name,
-				       devAttr->dedicatedChannel);
-				rc = -EINVAL;
-				goto out;
-			}
-
-			dedicatedHandle =
-			    MAKE_HANDLE(devAttr->dedicatedController,
-					devAttr->dedicatedChannel);
-			channel = HandleToChannel(dedicatedHandle);
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
-			    0) {
-				printk
-				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
-				     devAttr->name,
-				     devAttr->dedicatedController,
-				     devAttr->dedicatedChannel,
-				     DMA_gDeviceAttribute[channel->devType].
-				     name);
-				rc = -EBUSY;
-				goto out;
-			}
-
-			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
-			channel->devType = devIdx;
-
-			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
-				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
-			}
-
-			/* For dedicated channels, we can go ahead and configure the DMA channel now */
-			/* as well. */
-
-			ConfigChannel(dedicatedHandle);
-		}
-	}
-
-	/* Go through and register the interrupt handlers */
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
-				snprintf(channel->name, sizeof(channel->name),
-					 "dma %d:%d %s", controllerIdx,
-					 channelIdx,
-					 channel->devType ==
-					 DMA_DEVICE_NONE ? "" :
-					 DMA_gDeviceAttribute[channel->devType].
-					 name);
-
-				rc =
-				     request_irq(IRQ_DMA0C0 +
-						 (controllerIdx *
-						  DMA_NUM_CHANNELS) +
-						 channelIdx,
-						 dma_interrupt_handler,
-						 IRQF_DISABLED, channel->name,
-						 channel);
-				if (rc != 0) {
-					printk(KERN_ERR
-					       "request_irq for IRQ_DMA%dC%d failed\n",
-					       controllerIdx, channelIdx);
-				}
-			}
-		}
-	}
-
-	/* Create /proc/dma/channels and /proc/dma/devices */
-
-	gDmaDir = proc_mkdir("dma", NULL);
-
-	if (gDmaDir == NULL) {
-		printk(KERN_ERR "Unable to create /proc/dma\n");
-	} else {
-		create_proc_read_entry("channels", 0, gDmaDir,
-				       dma_proc_read_channels, NULL);
-		create_proc_read_entry("devices", 0, gDmaDir,
-				       dma_proc_read_devices, NULL);
-	}
-
-out:
-
-	up(&gDMA.lock);
-
-	return rc;
-}
-
-/****************************************************************************/
-/**
-*   Reserves a channel for use with @a dev. If the device is setup to use
-*   a shared channel, then this function will block until a free channel
-*   becomes available.
-*
-*   @return
-*       >= 0    - A valid DMA Handle.
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-DMA_Handle_t dma_request_channel_dbg
-    (DMA_Device_t dev, const char *fileName, int lineNum)
-#else
-DMA_Handle_t dma_request_channel(DMA_Device_t dev)
-#endif
-{
-	DMA_Handle_t handle;
-	DMA_DeviceAttribute_t *devAttr;
-	DMA_Channel_t *channel;
-	int controllerIdx;
-	int controllerIdx2;
-	int channelIdx;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
-		handle = -ENODEV;
-		goto out;
-	}
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-	{
-		char *s;
-
-		s = strrchr(fileName, '/');
-		if (s != NULL) {
-			fileName = s + 1;
-		}
-	}
-#endif
-	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
-		/* This device has already been requested and not been freed */
-
-		printk(KERN_ERR "%s: device %s is already requested\n",
-		       __func__, devAttr->name);
-		handle = -EBUSY;
-		goto out;
-	}
-
-	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-		/* This device has a dedicated channel. */
-
-		channel =
-		    &gDMA.controller[devAttr->dedicatedController].
-		    channel[devAttr->dedicatedChannel];
-		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
-			handle = -EBUSY;
-			goto out;
-		}
-
-		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
-		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-		channel->fileName = fileName;
-		channel->lineNum = lineNum;
-#endif
-		handle =
-		    MAKE_HANDLE(devAttr->dedicatedController,
-				devAttr->dedicatedChannel);
-		goto out;
-	}
-
-	/* This device needs to use one of the shared channels. */
-
-	handle = DMA_INVALID_HANDLE;
-	while (handle == DMA_INVALID_HANDLE) {
-		/* Scan through the shared channels and see if one is available */
-
-		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
-		     controllerIdx2++) {
-			/* Check to see if we should try on controller 1 first. */
-
-			controllerIdx = controllerIdx2;
-			if ((devAttr->
-			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
-				controllerIdx = 1 - controllerIdx;
-			}
-
-			/* See if the device is available on the controller being tested */
-
-			if ((devAttr->
-			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
-			    != 0) {
-				for (channelIdx = 0;
-				     channelIdx < DMA_NUM_CHANNELS;
-				     channelIdx++) {
-					channel =
-					    &gDMA.controller[controllerIdx].
-					    channel[channelIdx];
-
-					if (((channel->
-					      flags &
-					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
-					     0)
-					    &&
-					    ((channel->
-					      flags & DMA_CHANNEL_FLAG_IN_USE)
-					     == 0)) {
-						if (((channel->
-						      flags &
-						      DMA_CHANNEL_FLAG_LARGE_FIFO)
-						     != 0)
-						    &&
-						    ((devAttr->
-						      flags &
-						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
-						     == 0)) {
-							/* This channel is a large fifo - don't tie it up */
-							/* with devices that we don't want using it. */
-
-							continue;
-						}
-
-						channel->flags |=
-						    DMA_CHANNEL_FLAG_IN_USE;
-						channel->devType = dev;
-						devAttr->flags |=
-						    DMA_DEVICE_FLAG_IN_USE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-						channel->fileName = fileName;
-						channel->lineNum = lineNum;
-#endif
-						handle =
-						    MAKE_HANDLE(controllerIdx,
-								channelIdx);
-
-						/* Now that we've reserved the channel - we can go ahead and configure it */
-
-						if (ConfigChannel(handle) != 0) {
-							handle = -EIO;
-							printk(KERN_ERR
-							       "dma_request_channel: ConfigChannel failed\n");
-						}
-						goto out;
-					}
-				}
-			}
-		}
-
-		/* No channels are currently available. Let's wait for one to free up. */
-
-		{
-			DEFINE_WAIT(wait);
-
-			prepare_to_wait(&gDMA.freeChannelQ, &wait,
-					TASK_INTERRUPTIBLE);
-			up(&gDMA.lock);
-			schedule();
-			finish_wait(&gDMA.freeChannelQ, &wait);
-
-			if (signal_pending(current)) {
-				/* We don't currently hold gDMA.lock, so we return directly */
-
-				return -ERESTARTSYS;
-			}
-		}
-
-		if (down_interruptible(&gDMA.lock)) {
-			return -ERESTARTSYS;
-		}
-	}
-
-out:
-	up(&gDMA.lock);
-
-	return handle;
-}
-
-/* Create both _dbg and non _dbg functions for modules. */
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-#undef dma_request_channel
-DMA_Handle_t dma_request_channel(DMA_Device_t dev)
-{
-	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
-}
-
-EXPORT_SYMBOL(dma_request_channel_dbg);
-#endif
-EXPORT_SYMBOL(dma_request_channel);
-
-/****************************************************************************/
-/**
-*   Frees a previously allocated DMA Handle.
-*/
-/****************************************************************************/
-
-int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
-    ) {
-	int rc = 0;
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		rc = -EINVAL;
-		goto out;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
-		channel->lastDevType = channel->devType;
-		channel->devType = DMA_DEVICE_NONE;
-	}
-	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
-	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
-
-out:
-	up(&gDMA.lock);
-
-	wake_up_interruptible(&gDMA.freeChannelQ);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_free_channel);
-
-/****************************************************************************/
-/**
-*   Determines if a given device has been configured as using a shared
-*   channel.
-*
-*   @return
-*       0           Device uses a dedicated channel
-*       > zero      Device uses a shared channel
-*       < zero      Error code
-*/
-/****************************************************************************/
-
-int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
-}
-
-EXPORT_SYMBOL(dma_device_is_channel_shared);
-
-/****************************************************************************/
-/**
-*   Allocates buffers for the descriptors. This is normally done automatically
-*   but needs to be done explicitly when initiating a dma from interrupt
-*   context.
-*
-*   @return
-*       0       Descriptors were allocated successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-			  dma_addr_t srcData,	/* Place to get data to write to device */
-			  dma_addr_t dstData,	/* Pointer to device data address */
-			  size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int numDescriptors;
-	size_t ringBytesRequired;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if (devAttr->config.transferType != transferType) {
-		return -EINVAL;
-	}
-
-	/* Figure out how many descriptors we need. */
-
-	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
-	/*        srcData, dstData, numBytes); */
-
-	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
-							      (void *)srcData,
-							      (void *)dstData,
-							      numBytes);
-	if (numDescriptors < 0) {
-		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
-	/* a new one. */
-
-	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
-
-	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
-
-	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
-		/* Make sure that this code path is never taken from interrupt context. */
-		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
-		/* allocation needs to have already been done. */
-
-		might_sleep();
-
-		/* Free the old descriptor ring and allocate a new one. */
-
-		dma_free_descriptor_ring(&devAttr->ring);
-
-		/* And allocate a new one. */
-
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
-			       __func__, numDescriptors);
-			return rc;
-		}
-		/* Setup the descriptor for this transfer */
-
-		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
-					  devAttr->ring.physAddr,
-					  devAttr->ring.bytesAllocated,
-					  numDescriptors) < 0) {
-			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
-			       __func__);
-			return -EINVAL;
-		}
-	} else {
-		/* We've already got enough ring buffer allocated. All we need to do is reset */
-		/* any control information, just in case the previous DMA was stopped. */
-
-		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
-	}
-
-	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
-	/* as last time, then we don't need to call setDataDescriptor again. */
-
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* Remember the critical information for this transfer so that we can eliminate */
-	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
-
-	devAttr->prevSrcData = srcData;
-	devAttr->prevDstData = dstData;
-	devAttr->prevNumBytes = numBytes;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_alloc_descriptors);
-
-/****************************************************************************/
-/**
-*   Allocates and sets up descriptors for a double buffered circular buffer.
-*
-*   This is primarily intended to be used for things like the ingress samples
-*   from a microphone.
-*
-*   @return
-*       > 0     Number of descriptors actually allocated.
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-				     dma_addr_t srcData,	/* Physical address of source data */
-				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
-				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
-				     size_t numBytes	/* Number of bytes in each destination buffer */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int numDst1Descriptors;
-	int numDst2Descriptors;
-	int numDescriptors;
-	size_t ringBytesRequired;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	/* Figure out how many descriptors we need. */
-
-	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
-	/*        srcData, dstData, numBytes); */
-
-	numDst1Descriptors =
-	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
-					     (void *)dstData1, numBytes);
-	if (numDst1Descriptors < 0) {
-		return -EINVAL;
-	}
-	numDst2Descriptors =
-	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
-					     (void *)dstData2, numBytes);
-	if (numDst2Descriptors < 0) {
-		return -EINVAL;
-	}
-	numDescriptors = numDst1Descriptors + numDst2Descriptors;
-	/* printk("numDescriptors: %d\n", numDescriptors); */
-
-	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
-	/* a new one. */
-
-	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
-
-	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
-
-	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
-		/* Make sure that this code path is never taken from interrupt context. */
-		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
-		/* allocation needs to have already been done. */
-
-		might_sleep();
-
-		/* Free the old descriptor ring and allocate a new one. */
-
-		dma_free_descriptor_ring(&devAttr->ring);
-
-		/* And allocate a new one. */
-
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
-			       __func__, ringBytesRequired);
-			return rc;
-		}
-	}
-
-	/* Setup the descriptor for this transfer. Since this function is used with */
-	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
-	/* setDataDescriptor will keep trying to append onto the end. */
-
-	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
-				  devAttr->ring.physAddr,
-				  devAttr->ring.bytesAllocated,
-				  numDescriptors) < 0) {
-		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
-		return -EINVAL;
-	}
-
-	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
-	/* as last time, then we don't need to call setDataDescriptor again. */
-
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData1, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData2, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
-	/* try to make the 'prev' variables right. */
-
-	devAttr->prevSrcData = 0;
-	devAttr->prevDstData = 0;
-	devAttr->prevNumBytes = 0;
-
-	return numDescriptors;
-}
-
-EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
-
-/****************************************************************************/
-/**
-*   Initiates a transfer when the descriptors have already been setup.
-*
-*   This is a special case, and normally, the dma_transfer_xxx functions should
-*   be used.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_start_transfer(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
-				devAttr->ring.virtAddr);
-
-	/* Since we got this far, everything went successfully */
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_start_transfer);
-
-/****************************************************************************/
-/**
-*   Stops a previously started DMA transfer.
-*
-*   @return
-*       0       Transfer was stopped successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_stop_transfer(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	dmacHw_stopTransfer(channel->dmacHwHandle);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_stop_transfer);
-
-/****************************************************************************/
-/**
-*   Waits for a DMA to complete by polling. This function is only intended
-*   to be used for testing. Interrupts should be used for most DMA operations.
-*/
-/****************************************************************************/
-
-int dma_wait_transfer_done(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	dmacHw_TRANSFER_STATUS_e status;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	while ((status =
-		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
-	       dmacHw_TRANSFER_STATUS_BUSY) {
-		;
-	}
-
-	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
-		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
-		return -EIO;
-	}
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_wait_transfer_done);
-
-/****************************************************************************/
-/**
-*   Initiates a DMA, allocating the descriptors as required.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
-*/
-/****************************************************************************/
-
-int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
-		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-		 dma_addr_t srcData,	/* Place to get data to write to device */
-		 dma_addr_t dstData,	/* Pointer to device data address */
-		 size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if (devAttr->config.transferType != transferType) {
-		return -EINVAL;
-	}
-
-	/* We keep track of the information about the previous request for this */
-	/* device, and if the attributes match, then we can use the descriptors we setup */
-	/* the last time, and not have to reinitialize everything. */
-
-	{
-		rc =
-		     dma_alloc_descriptors(handle, transferType, srcData,
-					   dstData, numBytes);
-		if (rc != 0) {
-			return rc;
-		}
-	}
-
-	/* And kick off the transfer */
-
-	devAttr->numBytes = numBytes;
-	devAttr->transferStartTime = timer_get_tick_count();
-
-	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
-				devAttr->ring.virtAddr);
-
-	/* Since we got this far, everything went successfully */
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_transfer);
-
-/****************************************************************************/
-/**
-*   Set the callback function which will be called when a transfer completes.
-*   If a NULL callback function is set, then no callback will occur.
-*
-*   @note   @a devHandler will be called from IRQ context.
-*
-*   @return
-*       0       - Success
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
-			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
-			   void *userData	/* Pointer which will be passed to devHandler. */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-	unsigned long flags;
-
-	if (!IsDeviceValid(dev)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-	local_irq_save(flags);
-
-	devAttr->userData = userData;
-	devAttr->devHandler = devHandler;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_set_device_handler);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/dma_device.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/dma_device.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/dma_device.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/dma_device.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,593 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma_device.c
-*
-*   @brief  private array of DMA_DeviceAttribute_t
-*/
-/****************************************************************************/
-
-DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
-	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "mem-to-mem",
-	 .config = {
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-
-		    },
-	 },
-	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
-	{
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
-	 .name = "vpm",
-	 .dedicatedController = 0,
-	 .dedicatedChannel = 0,
-	 /* reserve DMA0:0 for VPM */
-	 },
-	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "nand",
-	 .config = {
-		    .srcPeripheralPort = 0,
-		    .dstPeripheralPort = 0,
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
-		    },
-	 },
-	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
-	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
-	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
-	 .name = "pif_tx",
-	 .dmacPort = {14, 5},
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    /* dstPeripheralPort          = 5 or 14 */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .maxDataPerBlock = 16256,
-		    },
-	 },
-	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
-	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
-	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
-	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
-	 .name = "pif_rx",
-	 .dmacPort = {14, 5},
-	 .config = {
-		    /* srcPeripheralPort          = 5 or 14 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .maxDataPerBlock = 16256,
-		    },
-	 },
-	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "i2s0_rx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "i2s0_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 1,	/* DST: I2S0 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "i2s1_rx",
-	 .config = {
-		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "i2s1_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 3,	/* DST: I2S1 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
-	{
-	 .name = "esw_tx",
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
-	 .dedicatedController = 1,
-	 .dedicatedChannel = 3,
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    /* DMAx_AHB_SSTATARy */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    /* DMAx_AHB_DSTATARy */
-		    .dstStatusRegisterAddress = 0x30490010,
-		    /* DMAx_AHB_CFGy */
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    /* DMAx_AHB_CTLy */
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    },
-	 },
-	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
-	{
-	 .name = "esw_rx",
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
-	 .dedicatedController = 1,
-	 .dedicatedChannel = 2,
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    /* DMAx_AHB_SSTATARy */
-		    .srcStatusRegisterAddress = 0x30480010,
-		    /* DMAx_AHB_DSTATARy */
-		    .dstStatusRegisterAddress = 0x00000000,
-		    /* DMAx_AHB_CFGy */
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    /* DMAx_AHB_CTLy */
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_a_rx",
-	 .config = {
-		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_a_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_b_rx",
-	 .config = {
-		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_b_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "apm_c_rx",
-	 .config = {
-		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "pcm0_rx",
-	 .config = {
-		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "pcm0_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 13,	/* DST: PCM0 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "pcm1_rx",
-	 .config = {
-		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "pcm1_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 15,	/* DST: PCM1 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "spum_rx",
-	 .config = {
-		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    /* Busrt size **MUST** be 16 for SPUM to work */
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    /* on the RX side, SPU needs to be the flow controller */
-		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
-		    },
-	 },
-	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "spum_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 7,	/* DST: SPUM */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    /* Busrt size **MUST** be 16 for SPUM to work */
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "mem-to-vram",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    },
-	 },
-	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "vram-to-mem",
-	 .config = {
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    },
-	 },
-};
-EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/cfg_global_defines.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/cfg_global_defines.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/cfg_global_defines.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/cfg_global_defines.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,40 +0,0 @@
-/*****************************************************************************
-* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CFG_GLOBAL_DEFINES_H
-#define CFG_GLOBAL_DEFINES_H
-
-/* CHIP */
-#define BCM1103 1
-
-#define BCM1191 4
-#define BCM2153 5
-#define BCM2820 6
-
-#define BCM2826 8
-#define FPGA11107 9
-#define BCM11107   10
-#define BCM11109   11
-#define BCM11170   12
-#define BCM11110   13
-#define BCM11211   14
-
-/* CFG_GLOBAL_CHIP_FAMILY types */
-#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
-#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
-#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
-#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
-
-#define IMAGE_HEADER_SIZE_CHECKSUM    4
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/cfg_global.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/cfg_global.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/cfg_global.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/cfg_global.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,13 +0,0 @@
-#ifndef _CFG_GLOBAL_H_
-#define _CFG_GLOBAL_H_
-
-#include <cfg_global_defines.h>
-
-#define CFG_GLOBAL_CHIP                         BCM11107
-#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
-#define CFG_GLOBAL_CHIP_REV                     0xB0
-#define CFG_GLOBAL_RAM_SIZE                     0x10000000
-#define CFG_GLOBAL_RAM_BASE                     0x00000000
-#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
-
-#endif /* _CFG_GLOBAL_H_ */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/cache.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/cache.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/cache.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/cache.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,35 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_CACHE_H
-#define CSP_CACHE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <asm/cacheflush.h>
-
-#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
-
-#else
-
-#define CSP_CACHE_FLUSH_ALL
-
-#endif
-
-#endif /* CSP_CACHE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/delay.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/delay.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/delay.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/delay.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,36 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_DELAY_H
-#define CSP_DELAY_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-/* Some CSP routines require use of the following delay routines. Use the OS */
-/* version if available, otherwise use a CSP specific definition. */
-/* void udelay(unsigned long usecs); */
-/* void mdelay(unsigned long msecs); */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-   #include <linux/delay.h>
-#else
-   #include <mach/csp/delay.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /*  CSP_DELAY_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/dmacHw.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/dmacHw.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/dmacHw.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/dmacHw.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,596 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw.h
-*
-*  @brief   API definitions for low level DMA controller driver
-*
-*/
-/****************************************************************************/
-#ifndef _DMACHW_H
-#define _DMACHW_H
-
-#include <stddef.h>
-
-#include <csp/stdint.h>
-#include <mach/csp/dmacHw_reg.h>
-
-/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
-
-   System specific channel ID should be defined as follows
-
-   For example:
-
-   #include <dmacHw.h>
-   ...
-   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
-   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
-   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
-   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
-   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
-   ...
-   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
-   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
-   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
-   ...
-*/
-#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
-
-typedef enum {
-	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
-	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
-	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
-	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
-	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
-	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
-	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
-	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
-} dmacHw_CHANNEL_PRIORITY_e;
-
-/* Source destination master interface */
-typedef enum {
-	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
-	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
-	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
-	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
-} dmacHw_MASTER_INTERFACE_e;
-
-typedef enum {
-	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
-} dmacHw_TRANSACTION_WIDTH_e;
-
-typedef enum {
-	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
-	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
-	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-} dmacHw_BURST_WIDTH_e;
-
-typedef enum {
-	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
-	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
-	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
-	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
-} dmacHw_TRANSFER_TYPE_e;
-
-typedef enum {
-	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
-	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
-	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
-} dmacHw_TRANSFER_MODE_e;
-
-typedef enum {
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
-} dmacHw_ADDRESS_UPDATE_MODE_e;
-
-typedef enum {
-	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
-	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
-} dmacHw_FLOW_CONTROL_e;
-
-typedef enum {
-	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
-	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
-	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
-} dmacHw_TRANSFER_STATUS_e;
-
-typedef enum {
-	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
-	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
-} dmacHw_INTERRUPT_e;
-
-typedef enum {
-	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
-	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
-	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
-	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
-} dmacHw_INTERRUPT_STATUS_e;
-
-typedef enum {
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
-	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
-} dmacHw_CONTROLLER_ATTRIB_e;
-
-typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
-typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
-				   "dmacHw_MAKE_CHANNEL_ID" macro
-				 */
-/* DMA channel configuration parameters */
-typedef struct {
-	uint32_t srcPeripheralPort;	/* Source peripheral port */
-	uint32_t dstPeripheralPort;	/* Destination peripheral port */
-	uint32_t srcStatusRegisterAddress;	/* Source status register address */
-	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
-
-	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
-	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
-	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
-	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
-	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
-					   0 = Maximum possible.
-					 */
-
-	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
-	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
-	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
-	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
-	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
-	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
-	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
-	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
-	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
-	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
-	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
-	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
-	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
-	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
-	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
-} dmacHw_CONFIG_t;
-
-/****************************************************************************/
-/**
-*  @brief   Initializes DMA
-*
-*  This function initializes DMA CSP driver
-*
-*  @note
-*     Must be called before using any DMA channel
-*/
-/****************************************************************************/
-void dmacHw_initDma(void);
-
-/****************************************************************************/
-/**
-*  @brief   Exit function for  DMA
-*
-*  This function isolates DMA from the system
-*
-*/
-/****************************************************************************/
-void dmacHw_exitDma(void);
-
-/****************************************************************************/
-/**
-*  @brief   Gets a handle to a DMA channel
-*
-*  This function returns a handle, representing a control block of a particular DMA channel
-*
-*  @return  -1       - On Failure
-*            handle  - On Success, representing a channel control block
-*
-*  @note
-*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Initializes a DMA channel for use
-*
-*  This function initializes and resets a DMA channel for use
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
-*
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor count
-*
-*
-*/
-/****************************************************************************/
-int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-				    size_t dataLen	/*   [ IN ] Data length in bytes */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Initializes descriptor ring
-*
-*  This function will initializes the descriptor ring of a DMA channel
-*
-*
-*  @return   -1 - On failure
-*             0 - On success
-*  @note
-*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
-*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
-*       is accessed by ARM and DMA
-*/
-/****************************************************************************/
-int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
-			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
-			  uint32_t len,	/*  [ IN ] Size of the pBuf */
-			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Finds amount of memory required to form a descriptor ring
-*
-*
-*  @return   Number of bytes required to form a descriptor ring
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Configure DMA channel
-*
-*  @return  0  : On success
-*           -1 : On failure
-*/
-/****************************************************************************/
-int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptors for known data length
-*
-*  When DMA has to work as a flow controller, this function prepares the
-*  descriptor chain to transfer data
-*
-*  from:
-*          - Memory to memory
-*          - Peripheral to memory
-*          - Memory to Peripheral
-*          - Peripheral to Peripheral
-*
-*  @return   -1 - On failure
-*             0 - On success
-*
-*/
-/****************************************************************************/
-int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
-			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
-			     size_t dataLen	/*  [ IN ] Length in bytes   */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Indicates whether DMA transfer is in progress or completed
-*
-*  @return   DMA transfer status
-*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
-*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
-*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
-*
-*/
-/****************************************************************************/
-dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptor carrying control information
-*
-*  This function will be used to send specific control information to the device
-*  using the DMA channel
-*
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
-				uint32_t control	/*  [ IN ] Device control information */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Read data DMA transferred to memory
-*
-*  This function will read data that has been DMAed to memory while transferring from:
-*          - Memory to memory
-*          - Peripheral to memory
-*
-*  @return  0 - No more data is available to read
-*           1 - More data might be available to read
-*
-*/
-/****************************************************************************/
-int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
-			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
-			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			       void **ppBbuf,	/*  [ OUT ] Data received */
-			       size_t *pLlen	/*  [ OUT ] Length of the data received */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
-*
-*  This function will form the descriptor ring by allocating buffers, when source peripheral
-*  has to work as a flow controller to transfer data from:
-*           - Peripheral to memory.
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
-				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
-				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
-				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
-				     int num	/*  [ IN ] Number of descriptor to set */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to initiate transfer
-*
-*  @return  void
-*
-*
-*  @note
-*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
-*     - This function should also be called from ISR to program the channel with
-*       pending descriptors
-*/
-/****************************************************************************/
-void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Resets descriptor control information
-*
-*  @return  void
-*/
-/****************************************************************************/
-void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to stop transfer
-*
-*  Ensures the channel is not doing any transfer after calling this function
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Check the existence of pending descriptor
-*
-*  This function confirmes if there is any pending descriptor in the chain
-*  to program the channel
-*
-*  @return  1 : Channel need to be programmed with pending descriptor
-*           0 : No more pending descriptor to programe the channel
-*
-*  @note
-*     - This function should be called from ISR in case there are pending
-*       descriptor to program the channel.
-*
-*     Example:
-*
-*     dmac_isr ()
-*     {
-*         ...
-*         if (dmacHw_descriptorPending (handle))
-*         {
-*            dmacHw_initiateTransfer (handle);
-*         }
-*     }
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Deallocates source or destination memory, allocated
-*
-*  This function can be called to deallocate data memory that was DMAed successfully
-*
-*  @return  -1  - On failure
-*            0  - On success
-*
-*  @note
-*     This function will be called ONLY, when source OR destination address is pointing
-*     to dynamic memory
-*/
-/****************************************************************************/
-int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the DMA channel specific interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Returns the cause of channel specific DMA interrupt
-*
-*  This function returns the cause of interrupt
-*
-*  @return  Interrupt status, each bit representing a specific type of interrupt
-*           of type dmacHw_INTERRUPT_STATUS_e
-*  @note
-*           This function should be called under the context of ISR
-*/
-/****************************************************************************/
-dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a DMA channel causing interrupt
-*
-*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
-*
-*  @return  NULL   : No channel causing DMA interrupt
-*           ! NULL : Handle to a channel causing DMA interrupt
-*  @note
-*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-*  @brief   Sets channel specific user data
-*
-*  This function associates user data to a specific DMA channel
-*
-*/
-/****************************************************************************/
-void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			       void *userData	/*  [ IN ] User data  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Gets channel specific user data
-*
-*  This function returns user data specific to a DMA channel
-*
-*  @return   user data
-*/
-/****************************************************************************/
-void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Displays channel specific registers and other control parameters
-*
-*
-*  @return  void
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Provides DMA controller attributes
-*
-*
-*  @return  DMA controller attributes
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
-    );
-
-#endif /* _DMACHW_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/errno.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/errno.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/errno.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/errno.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_ERRNO_H
-#define CSP_ERRNO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if   defined(__KERNEL__)
-#include <linux/errno.h>
-#elif defined(CSP_SIMULATION)
-#include <asm-generic/errno.h>
-#else
-#include <errno.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_ERRNO_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/intcHw.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/intcHw.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/intcHw.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/intcHw.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,40 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-/****************************************************************************/
-/**
-*  @file    intcHw.h
-*
-*  @brief   generic interrupt controller API
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_H
-#define _INTCHW_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/intcHw_reg.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask);
-static inline void intcHw_irq_enable(void *basep, uint32_t mask);
-
-#endif /* _INTCHW_H */
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/module.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/module.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/module.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/module.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_MODULE_H
-#define CSP_MODULE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-    #include <linux/module.h>
-#else
-    #define EXPORT_SYMBOL(symbol)
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_MODULE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/reg.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/reg.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/reg.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/reg.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,114 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    reg.h
-*
-*  @brief   Generic register definitions used in CSP
-*/
-/****************************************************************************/
-
-#ifndef CSP_REG_H
-#define CSP_REG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#define __REG32(x)      (*((volatile uint32_t *)(x)))
-#define __REG16(x)      (*((volatile uint16_t *)(x)))
-#define __REG8(x)       (*((volatile uint8_t *) (x)))
-
-/* Macros used to define a sequence of reserved registers. The start / end */
-/* are byte offsets in the particular register definition, with the "end" */
-/* being the offset of the next un-reserved register. E.g. if offsets */
-/* 0x10 through to 0x1f are reserved, then this reserved area could be */
-/* specified as follows. */
-/*  typedef struct */
-/*  { */
-/*      uint32_t reg1;           offset 0x00 */
-/*      uint32_t reg2;           offset 0x04 */
-/*      uint32_t reg3;           offset 0x08 */
-/*      uint32_t reg4;           offset 0x0c */
-/*      REG32_RSVD(0x10, 0x20); */
-/*      uint32_t reg5;           offset 0x20 */
-/*      ... */
-/*  } EXAMPLE_REG_t; */
-#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
-#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
-#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
-/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
-/* flags variable to be declared locally. */
-/* e.g. */
-/*    statement1; */
-/*    { */
-/*       REG_LOCAL_IRQ_SAVE; */
-/*       <multiple statements here> */
-/*       REG_LOCAL_IRQ_RESTORE; */
-/*    } */
-/*    statement2; */
-/*  */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <mach/hardware.h>
-#include <linux/interrupt.h>
-
-#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
-	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
-
-#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
-
-#else
-
-#define REG_LOCAL_IRQ_SAVE
-#define REG_LOCAL_IRQ_RESTORE
-
-#endif
-
-static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg &= value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg |= value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
-				     uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg = (*reg & mask) | value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
-{
-	*reg = value;
-}
-
-#endif /* CSP_REG_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/secHw.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/secHw.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/secHw.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/secHw.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,65 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw.h
-*
-*  @brief   Definitions for accessing low level security features
-*
-*/
-/****************************************************************************/
-#ifndef SECHW_H
-#define SECHW_H
-
-typedef void (*secHw_FUNC_t) (void);
-
-typedef enum {
-	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
-	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
-} secHw_MODE;
-
-/****************************************************************************/
-/**
-*  @brief   Requesting to execute the function in secure mode
-*
-*  This function requests the given function to run in secure mode
-*
-*/
-/****************************************************************************/
-void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Sets the  mode
-*
-*  his function sets the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_SetMode(secHw_MODE	/* Processor mode */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Get the current mode
-*
-*  This function retieves the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_GetMode(secHw_MODE *);
-
-#endif /* SECHW_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/stdint.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/stdint.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/stdint.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/stdint.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,30 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_STDINT_H
-#define CSP_STDINT_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_STDINT_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/string.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/string.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/string.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/string.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,34 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-
-#ifndef CSP_STRING_H
-#define CSP_STRING_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-   #include <linux/string.h>
-#else
-   #include <string.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_STRING_H */
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/tmrHw.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/tmrHw.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/csp/tmrHw.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/csp/tmrHw.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,263 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw.h
-*
-*  @brief   API definitions for low level Timer driver
-*
-*/
-/****************************************************************************/
-#ifndef _TMRHW_H
-#define _TMRHW_H
-
-#include <csp/stdint.h>
-
-typedef uint32_t tmrHw_ID_t;	/* Timer ID */
-typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
-typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
-typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
-
-typedef enum {
-	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
-	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
-} tmrHw_INTERRUPT_STATUS_e;
-
-typedef enum {
-	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
-	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
-} tmrHw_CAPABILITY_e;
-
-/****************************************************************************/
-/**
-*  @brief   Get timer capability
-*
-*  This function returns various capabilities/attributes of a timer
-*
-*  @return  Numeric capability
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer in terms of timer interrupt rate
-*
-*  This function initializes a periodic timer to generate specific number of
-*  timer interrupt per second
-*
-*  @return   On success: Effective timer frequency
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt after
-*           certain time interval
-*
-*  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in millisecond
-*
-*  @return   On success: Effective interval set in mili-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt just once
-*           after certain time interval
-*
-*  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in millisecond
-*
-*  @return   On success: Effective interval set in mili-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a timer to run as a free running timer
-*
-*  This function initializes a timer to run as a free running timer
-*
-*  @return   Timer resolution (count / sec)
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Starts a timer
-*
-*  This function starts a preconfigured timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*/
-/****************************************************************************/
-int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Stops a timer
-*
-*  This function stops a running timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*/
-/****************************************************************************/
-int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Gets current timer count
-*
-*  This function returns the current timer value
-*
-*  @return  Current downcounting timer value
-*
-*/
-/****************************************************************************/
-tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Gets timer count rate
-*
-*  This function returns the number of counts per second
-*
-*  @return  Count rate
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Enables timer interrupt
-*
-*  This function enables the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Disables timer interrupt
-*
-*  This function disable the timer interrupt
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the timer interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Gets the interrupt status
-*
-*  This function returns timer interrupt status
-*
-*  @return   Interrupt status
-*/
-/****************************************************************************/
-tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a timer causing interrupt
-*
-*  This functions returns a timer causing interrupt
-*
-*  @return  0xFFFFFFFF   : No timer causing an interrupt
-*           ! 0xFFFFFFFF : timer causing an interrupt
-*  @note
-*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
-*/
-/****************************************************************************/
-tmrHw_ID_t tmrHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-*  @brief   Displays specific timer registers
-*
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-		  unsigned long usecs	/*  [ IN ] usec to delay */
-) __attribute__ ((section(".aramtext")));
-
-#endif /* _TMRHW_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/cap.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/cap.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/cap.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/cap.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,63 +0,0 @@
-/*****************************************************************************
-* Copyright 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CAP_H
-#define CAP_H
-
-/* ---- Include Files ---------------------------------------------------- */
-/* ---- Public Constants and Types --------------------------------------- */
-typedef enum {
-	CAP_NOT_PRESENT = 0,
-	CAP_PRESENT
-} CAP_RC_T;
-
-typedef enum {
-	CAP_VPM,
-	CAP_ETH_PHY,
-	CAP_ETH_GMII,
-	CAP_ETH_SGMII,
-	CAP_USB,
-	CAP_TSC,
-	CAP_EHSS,
-	CAP_SDIO,
-	CAP_UARTB,
-	CAP_KEYPAD,
-	CAP_CLCD,
-	CAP_GE,
-	CAP_LEDM,
-	CAP_BBL,
-	CAP_VDEC,
-	CAP_PIF,
-	CAP_APM,
-	CAP_SPU,
-	CAP_PKA,
-	CAP_RNG,
-} CAP_CAPABILITY_T;
-
-typedef enum {
-	CAP_LCD_WVGA = 0,
-	CAP_LCD_VGA = 0x1,
-	CAP_LCD_WQVGA = 0x2,
-	CAP_LCD_QVGA = 0x3
-} CAP_LCD_RES_T;
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
-static inline uint32_t cap_getMaxArmSpeedHz(void);
-static inline uint32_t cap_getMaxVpmSpeedHz(void);
-static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,409 +0,0 @@
-/*****************************************************************************
-* Copyright 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CAP_INLINE_H
-#define CAP_INLINE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/cap.h>
-#include <cfg_global.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-#define CAP_CONFIG0_VPM_DIS          0x00000001
-#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
-#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
-#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
-#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
-#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
-#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
-#define CAP_CONFIG0_USB0_DIS         0x00000080
-#define CAP_CONFIG0_USB1_DIS         0x00000100
-#define CAP_CONFIG0_TSC_DIS          0x00000200
-#define CAP_CONFIG0_EHSS0_DIS        0x00000400
-#define CAP_CONFIG0_EHSS1_DIS        0x00000800
-#define CAP_CONFIG0_SDIO0_DIS        0x00001000
-#define CAP_CONFIG0_SDIO1_DIS        0x00002000
-#define CAP_CONFIG0_UARTB_DIS        0x00004000
-#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
-#define CAP_CONFIG0_CLCD_DIS         0x00010000
-#define CAP_CONFIG0_GE_DIS           0x00020000
-#define CAP_CONFIG0_LEDM_DIS         0x00040000
-#define CAP_CONFIG0_BBL_DIS          0x00080000
-#define CAP_CONFIG0_VDEC_DIS         0x00100000
-#define CAP_CONFIG0_PIF_DIS          0x00200000
-#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
-#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
-
-#define CAP_CONFIG1_APMA_DIS         0x00000001
-#define CAP_CONFIG1_APMB_DIS         0x00000002
-#define CAP_CONFIG1_APMC_DIS         0x00000004
-#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
-#define CAP_CONFIG1_CLCD_RES_SHIFT   9
-#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-
-#define CAP_CONFIG2_SPU_DIS          0x00000010
-#define CAP_CONFIG2_PKA_DIS          0x00000020
-#define CAP_CONFIG2_RNG_DIS          0x00000080
-
-#if   (CFG_GLOBAL_CHIP == BCM11107)
-#define capConfig0 0
-#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 3
-#elif (CFG_GLOBAL_CHIP == FPGA11107)
-#define capConfig0 0
-#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 3
-#elif (CFG_GLOBAL_CHIP == BCM11109)
-#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11170)
-#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11110)
-#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 CAP_CONFIG1_APMC_DIS
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
-#define capConfig1 CAP_CONFIG1_APMC_DIS
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 2
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
-#define CAP_HW_CFG_ARM_CLK_HZ 500000000
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-#define CAP_HW_CFG_ARM_CLK_HZ 300000000
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-#define CAP_HW_CFG_ARM_CLK_HZ 666666666
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
-#define CAP_HW_CFG_VPM_CLK_HZ 333333333
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-#define CAP_HW_CFG_VPM_CLK_HZ 200000000
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/****************************************************************************
-*  cap_isPresent -
-*
-*  PURPOSE:
-*     Determines if the chip has a certain capability present
-*
-*  PARAMETERS:
-*     capability - type of capability to determine if present
-*
-*  RETURNS:
-*     CAP_PRESENT or CAP_NOT_PRESENT
-****************************************************************************/
-static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
-{
-	CAP_RC_T returnVal = CAP_NOT_PRESENT;
-
-	switch (capability) {
-	case CAP_VPM:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_PHY:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_GMII:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_SGMII:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_USB:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_TSC:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_EHSS:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_SDIO:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_UARTB:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_KEYPAD:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_CLCD:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_GE:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_LEDM:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_BBL:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_VDEC:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_PIF:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_APM:
-		{
-			if ((index == 0)
-			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 2)
-			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_SPU:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_PKA:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_RNG:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	default:
-		{
-		}
-		break;
-	}
-	return returnVal;
-}
-
-/****************************************************************************
-*  cap_getMaxArmSpeedHz -
-*
-*  PURPOSE:
-*     Determines the maximum speed of the ARM CPU
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*     clock speed in Hz that the ARM processor is able to run at
-****************************************************************************/
-static inline uint32_t cap_getMaxArmSpeedHz(void)
-{
-#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
-	return 500000000;
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-	return 300000000;
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-	return 666666666;
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-}
-
-/****************************************************************************
-*  cap_getMaxVpmSpeedHz -
-*
-*  PURPOSE:
-*     Determines the maximum speed of the VPM
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*     clock speed in Hz that the VPM is able to run at
-****************************************************************************/
-static inline uint32_t cap_getMaxVpmSpeedHz(void)
-{
-#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
-	return 333333333;
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-	return 200000000;
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-}
-
-/****************************************************************************
-*  cap_getMaxLcdRes -
-*
-*  PURPOSE:
-*     Determines the maximum LCD resolution capabilities
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
-*
-****************************************************************************/
-static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
-{
-	return (CAP_LCD_RES_T)
-		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
-		 CAP_CONFIG1_CLCD_RES_SHIFT);
-}
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,1123 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CHIPC_DEF_H
-#define CHIPC_DEF_H
-
-/* ---- Include Files ----------------------------------------------------- */
-
-#include <csp/stdint.h>
-#include <csp/errno.h>
-#include <csp/reg.h>
-#include <mach/csp/chipcHw_reg.h>
-
-/* ---- Public Constants and Types ---------------------------------------- */
-
-/* Set 1 to configure DDR/VPM phase alignment by HW */
-#define chipcHw_DDR_HW_PHASE_ALIGN    0
-#define chipcHw_VPM_HW_PHASE_ALIGN    0
-
-typedef uint32_t chipcHw_freq;
-
-/* Configurable miscellaneous clocks */
-typedef enum {
-	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
-	chipcHw_CLOCK_ARM,	/* ARM Clock */
-	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
-	chipcHw_CLOCK_VPM,	/* VPM Clock */
-	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
-	chipcHw_CLOCK_UART,	/* UART Clock */
-	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
-	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
-	chipcHw_CLOCK_SPI,	/* SPI Clock */
-	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
-
-	chipcHw_CLOCK_BUS,	/* BUS Clock */
-	chipcHw_CLOCK_OTP,	/* OTP Clock */
-	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
-	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
-	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
-	chipcHw_CLOCK_APM100,	/* APM100 Clock */
-	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
-	chipcHw_CLOCK_LED,	/* LED Clock */
-
-	chipcHw_CLOCK_USB,	/* USB Clock */
-	chipcHw_CLOCK_LCD,	/* LCD CLock */
-	chipcHw_CLOCK_APM,	/* APM Clock */
-
-	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
-} chipcHw_CLOCK_e;
-
-/* System booting strap options */
-typedef enum {
-	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
-	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
-	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
-	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
-	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
-	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
-} chipcHw_BOOT_DEVICE_e;
-
-/* System booting modes */
-typedef enum {
-	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
-	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
-	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
-	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
-} chipcHw_BOOT_MODE_e;
-
-/* NAND Flash page size strap options */
-typedef enum {
-	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
-	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
-	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
-	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
-} chipcHw_NAND_PAGESIZE_e;
-
-/* GPIO Pin function */
-typedef enum {
-	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
-	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
-	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
-	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
-	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
-	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
-	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
-	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
-	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
-	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
-	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
-	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
-	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
-	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
-} chipcHw_GPIO_FUNCTION_e;
-
-/* PIN Output slew rate */
-typedef enum {
-	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
-	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
-} chipcHw_PIN_SLEW_RATE_e;
-
-/* PIN Current drive strength */
-typedef enum {
-	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
-	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
-	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
-	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
-	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
-	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
-} chipcHw_PIN_CURRENT_STRENGTH_e;
-
-/* PIN Pull up register settings */
-typedef enum {
-	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
-	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
-	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
-} chipcHw_PIN_PULL_e;
-
-/* PIN input type settings */
-typedef enum {
-	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
-	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
-} chipcHw_PIN_INPUTTYPE_e;
-
-/* Allow/Disalow the support of spread spectrum  */
-typedef enum {
-	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
-	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
-} chipcHw_SPREAD_SPECTRUM_e;
-
-typedef struct {
-	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
-						   If supported, call chipcHw_enableSpreadSpectrum ()
-						   to activate the spread spectrum with desired spread. */
-	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
-	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
-	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
-	uint32_t armBusRatio;	/* ARM clock : Bus clock */
-	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
-	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
-} chipcHw_INIT_PARAM_t;
-
-/* CHIP revision number */
-typedef enum {
-	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
-	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
-} chipcHw_REV_NUMBER_e;
-
-typedef enum {
-	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
-	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
-	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
-	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
-} chipcHw_VPM_HW_PHASE_INTR_e;
-
-typedef enum {
-	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
-	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
-	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
-} chipcHw_DDR_HW_PHASE_MARGIN_e;
-
-typedef enum {
-	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
-	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
-	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
-} chipcHw_VPM_HW_PHASE_MARGIN_e;
-
-#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
-
-/* Programmable pin defines */
-#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
-									     /* GPIO pin 0 - 60 */
-#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
-#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
-#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
-#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
-#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
-#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
-#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
-#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
-#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
-#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
-#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
-#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
-#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
-#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
-#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
-#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
-#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the clock module
-*
-*/
-/****************************************************************************/
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Enables the PLL1
-*
-*  This function enables the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
-			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Enables the PLL2
-*
-*  This function enables the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL1
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll1Disable(void);
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL2
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll2Disable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in KHz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in Hz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
-				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success ( # of adjustment required )
-*            -1 : On failure
-*/
-/****************************************************************************/
-int chipcHw_vpmPhaseAlign(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables core a clock of a certain device
-*
-*  This function enables a core clock
-*
-*  @return  void
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disabled a core clock of a certain device
-*
-*  This function disables a core clock
-*
-*  @return  void
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Enables bypass clock of a certain device
-*
-*  This function enables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disabled bypass clock of a certain device
-*
-*  This function disables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Get Numeric Chip ID
-*
-*  This function returns Chip ID that includes the revison number
-*
-*  @return  Complete numeric Chip ID
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipId(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get Chip Product ID
-*
-*  This function returns Chip Product ID
-*
-*  @return  Chip Product ID
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipProductId(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get revision number
-*
-*  This function returns revision number of the chip
-*
-*  @return  Revision number
-*/
-/****************************************************************************/
-static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables bus interface clock
-*
-*  Enables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disables bus interface clock
-*
-*  Disables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Enables various audio channels
-*
-*  Enables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disables various audio channels
-*
-*  Disables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Soft resets devices
-*
-*  Soft resets various devices
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
-*/
-/****************************************************************************/
-static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Configures misc CHIP functionality
-*
-*  Configures CHIP functionality
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Set OTP options
-*
-*  Set OTP options
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_OTP_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Get sticky bits
-*
-*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getStickyBits(void);
-
-/****************************************************************************/
-/**
-*  @brief    Set sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Clear sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Get software override strap options
-*
-*  Retrieves software override strap options
-*
-*  @return   Software override strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getSoftStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Set software override strap options
-*
-*  set software override strap options
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
-
-/****************************************************************************/
-/**
-*  @brief    Get pin strap options
-*
-*  Retrieves pin strap options
-*
-*  @return   Pin strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getPinStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Get valid pin strap options
-*
-*  Retrieves valid pin strap options
-*
-*  @return   valid Pin strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getValidStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Initialize valid pin strap options
-*
-*  Retrieves valid pin strap options by copying HW strap options to soft register
-*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_initValidStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get status (enabled/disabled) of bus interface clock
-*
-*  This function returns the status of devices' bus interface clock
-*
-*  @return  Bus interface clock
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get boot device
-*
-*  This function returns the device type used in booting the system
-*
-*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get boot mode
-*
-*  This function returns the way the system was booted
-*
-*  @return  Boot mode of type chipcHw_BOOT_MODE_e
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash page size
-*
-*  This function returns the NAND device page size
-*
-*  @return  Boot NAND device page size
-*
-*/
-/****************************************************************************/
-static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash address cycle configuration
-*
-*  This function returns the NAND flash address cycle configuration
-*
-*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
-*
-*/
-/****************************************************************************/
-static inline int chipcHw_getNandExtraCycle(void);
-
-/****************************************************************************/
-/**
-*  @brief   Activates PIF interface
-*
-*  This function activates PIF interface by taking control of LCD pins
-*
-*  @note
-*       When activated, LCD pins will be defined as follows for PIF operation
-*
-*       CLD[17:0]  = pif_data[17:0]
-*       CLD[23:18] = pif_address[5:0]
-*       CLPOWER    = pif_wr_str
-*       CLCP       = pif_rd_str
-*       CLAC       = pif_hat1
-*       CLFP       = pif_hrdy1
-*       CLLP       = pif_hat2
-*       GPIO[42]   = pif_hrdy2
-*
-*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_activatePifInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Activates LCD interface
-*
-*  This function activates LCD interface
-*
-*  @note
-*       When activated, LCD pins will be defined as follows
-*
-*       CLD[17:0]  = LCD data
-*       CLD[23:18] = LCD data
-*       CLPOWER    = LCD power
-*       CLCP       =
-*       CLAC       = LCD ack
-*       CLFP       =
-*       CLLP       =
-*/
-/****************************************************************************/
-static inline void chipcHw_activateLcdInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Deactivates PIF/LCD interface
-*
-*  This function deactivates PIF/LCD interface
-*
-*  @note
-*       When deactivated LCD pins will be in rti-stated
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_deactivatePifLcdInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get to know the configuration of GPIO pin
-*
-*/
-/****************************************************************************/
-static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Configure GPIO pin function
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
-					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin slew rate
-*
-*  This function sets the slew of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin output drive current
-*
-*  This function sets output drive current of individual pin
-*
-*  Note: Avoid the use of the word 'current' since linux headers define this
-*        to be the current task.
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin pullup register
-*
-*  This function sets pullup register of individual  pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin input type
-*
-*  This function sets input type of individual Pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Retrieves a string representation of the mux setting for a pin.
-*
-*  @return  Pointer to a character string.
-*/
-/****************************************************************************/
-
-const char *chipcHw_getGpioPinFunctionStr(int pin);
-
-/****************************************************************************/
-/**  @brief issue warmReset
- */
-/****************************************************************************/
-void chipcHw_reset(uint32_t mask);
-
-/****************************************************************************/
-/**  @brief clock reconfigure
- */
-/****************************************************************************/
-void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
-			   uint32_t ddrRatio);
-
-/****************************************************************************/
-/**
-*  @brief   Enable Spread Spectrum
-*
-*  @note chipcHw_Init() must be called earlier
-*/
-/****************************************************************************/
-static inline void chipcHw_enableSpreadSpectrum(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable Spread Spectrum
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_disableSpreadSpectrum(void);
-
-/****************************************************************************/
-/**  @brief Checks if software strap is enabled
- *
- *   @return 1 : When enable
- *           0 : When disable
- */
-/****************************************************************************/
-static inline int chipcHw_isSoftwareStrapsEnable(void);
-
-/****************************************************************************/
-/**  @brief Enable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsEnable(void);
-
-/****************************************************************************/
-/**  @brief Disable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsDisable(void);
-
-/****************************************************************************/
-/**  @brief PLL test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL2 test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestDisable(void);
-
-/****************************************************************************/
-/**  @brief PLL2 test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestDisable(void);
-
-/****************************************************************************/
-/**  @brief Get PLL test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPllTestEnable(void);
-
-/****************************************************************************/
-/**  @brief Get PLL2 test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPll2TestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL test select
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestSelect(uint32_t val);
-
-/****************************************************************************/
-/**  @brief PLL2 test select
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestSelect(uint32_t val);
-
-/****************************************************************************/
-/**  @brief Get PLL test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPllTestSelected(void);
-
-/****************************************************************************/
-/**  @brief Get PLL2 test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPll2TestSelected(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM SW phase alignment interrupt mode
-*
-*  This function sets VPM phase alignment interrupt
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set DDR phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Checks DDR phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
-
-/****************************************************************************/
-/**
-*  @brief   Checks VPM phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrPhaseControl(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmPhaseControl(void);
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a DDR phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a VPM phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Clear DDR phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
-
-/****************************************************************************/
-/**
-*  @brief   Clear VPM phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
-
-/* ---- Private Constants and Types -------------------------------------- */
-
-#endif /* CHIPC_DEF_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,1673 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CHIPC_INLINE_H
-#define CHIPC_INLINE_H
-
-/* ---- Include Files ----------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/reg.h>
-#include <mach/csp/chipcHw_reg.h>
-#include <mach/csp/chipcHw_def.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-typedef enum {
-	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
-	chipcHw_OPTYPE_OUTPUT	/* Output operation */
-} chipcHw_OPTYPE_e;
-
-/* ---- Public Constants and Types ---------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------- */
-/* ---- Public Function Prototypes ---------------------------------------- */
-/* ---- Private Function Prototypes --------------------------------------- */
-static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
-				    chipcHw_OPTYPE_e type, int mode);
-
-/****************************************************************************/
-/**
-*  @brief   Get Numeric Chip ID
-*
-*  This function returns Chip ID that includes the revison number
-*
-*  @return  Complete numeric Chip ID
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipId(void)
-{
-	return pChipcHw->ChipId;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable Spread Spectrum
-*
-*  @note chipcHw_Init() must be called earlier
-*/
-/****************************************************************************/
-static inline void chipcHw_enableSpreadSpectrum(void)
-{
-	if ((pChipcHw->
-	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
-	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
-		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
-		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
-		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
-		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
-		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable Spread Spectrum
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_disableSpreadSpectrum(void)
-{
-	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Chip Product ID
-*
-*  This function returns Chip Product ID
-*
-*  @return  Chip Product ID
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipProductId(void)
-{
-	return (pChipcHw->
-		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
-		chipcHw_REG_CHIPID_BASE_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get revision number
-*
-*  This function returns revision number of the chip
-*
-*  @return  Revision number
-*/
-/****************************************************************************/
-static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
-{
-	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables bus interface clock
-*
-*  Enables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables bus interface clock
-*
-*  Disables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get status (enabled/disabled) of bus interface clock
-*
-*  This function returns the status of devices' bus interface clock
-*
-*  @return  Bus interface clock
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
-{
-	return pChipcHw->BusIntfClock;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables various audio channels
-*
-*  Enables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->AudioEnable, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables various audio channels
-*
-*  Disables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Soft resets devices
-*
-*  Soft resets various devices
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
-*/
-/****************************************************************************/
-static inline void chipcHw_softReset(uint64_t mask)
-{
-	chipcHw_softResetEnable(mask);
-	chipcHw_softResetDisable(mask);
-}
-
-static inline void chipcHw_softResetDisable(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-
-	/* Deassert module soft reset */
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->SoftReset1 ^= ctrl1;
-	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void chipcHw_softResetEnable(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-	uint32_t unhold = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->SoftReset1 |= ctrl1;
-	/* Mask out unhold request bits */
-	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
-
-	/* Process unhold requests */
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
-		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
-	}
-
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
-		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
-	}
-
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
-		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
-	}
-
-	if (unhold) {
-		/* Make sure unhold request is effective */
-		pChipcHw->SoftReset1 &= ~unhold;
-	}
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Configures misc CHIP functionality
-*
-*  Configures CHIP functionality
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_miscControl(uint32_t mask)
-{
-	reg32_write(&pChipcHw->MiscCtrl, mask);
-}
-
-static inline void chipcHw_miscControlDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
-}
-
-static inline void chipcHw_miscControlEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set OTP options
-*
-*  Set OTP options
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_OTP_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setOTPOption(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-
-	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
-	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Get sticky bits
-*
-*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getStickyBits(void)
-{
-	return pChipcHw->Sticky;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setStickyBits(uint32_t mask)
-{
-	uint32_t bits = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	if (mask & chipcHw_REG_STICKY_POR_BROM) {
-		bits |= chipcHw_REG_STICKY_POR_BROM;
-	} else {
-		uint32_t sticky;
-		sticky = pChipcHw->Sticky;
-
-		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
-		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
-			bits |= chipcHw_REG_STICKY_BOOT_DONE;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_1;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_2;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_3;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_4;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_5;
-		}
-	}
-	pChipcHw->Sticky = bits;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Clear sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_clearStickyBits(uint32_t mask)
-{
-	uint32_t bits = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	if (mask &
-	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
-	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
-	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
-		uint32_t sticky = pChipcHw->Sticky;
-
-		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
-		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
-			bits = chipcHw_REG_STICKY_BOOT_DONE;
-			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_1;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_2;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_3;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_4;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_5;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
-		}
-	}
-	pChipcHw->Sticky = bits | mask;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Get software strap value
-*
-*  Retrieves software strap value
-*
-*  @return   Software strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getSoftStraps(void)
-{
-	return pChipcHw->SoftStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set software override strap options
-*
-*  set software override strap options
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
-{
-	reg32_write(&pChipcHw->SoftStraps, strapOptions);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Pin Strap Options
-*
-*  This function returns the raw boot strap options
-*
-*  @return  strap options
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getPinStraps(void)
-{
-	return pChipcHw->PinStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Valid Strap Options
-*
-*  This function returns the valid raw boot strap options
-*
-*  @return  strap options
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getValidStraps(void)
-{
-	uint32_t softStraps;
-
-	/*
-	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
-	 ** which copies HW straps to soft straps if there is no override
-	 */
-	softStraps = chipcHw_getSoftStraps();
-
-	return softStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Initialize valid pin strap options
-*
-*  Retrieves valid pin strap options by copying HW strap options to soft register
-*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_initValidStraps(void)
-{
-	uint32_t softStraps;
-
-	REG_LOCAL_IRQ_SAVE;
-	softStraps = chipcHw_getSoftStraps();
-
-	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
-		/* Copy HW straps to software straps */
-		chipcHw_setSoftStraps(chipcHw_getPinStraps());
-	}
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get boot device
-*
-*  This function returns the device type used in booting the system
-*
-*  @return  Boot device of type chipcHw_BOOT_DEVICE
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get boot mode
-*
-*  This function returns the way the system was booted
-*
-*  @return  Boot mode of type chipcHw_BOOT_MODE
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash page size
-*
-*  This function returns the NAND device page size
-*
-*  @return  Boot NAND device page size
-*
-*/
-/****************************************************************************/
-static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash address cycle configuration
-*
-*  This function returns the NAND flash address cycle configuration
-*
-*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
-*
-*/
-/****************************************************************************/
-static inline int chipcHw_getNandExtraCycle(void)
-{
-	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Activates PIF interface
-*
-*  This function activates PIF interface by taking control of LCD pins
-*
-*  @note
-*       When activated, LCD pins will be defined as follows for PIF operation
-*
-*       CLD[17:0]  = pif_data[17:0]
-*       CLD[23:18] = pif_address[5:0]
-*       CLPOWER    = pif_wr_str
-*       CLCP       = pif_rd_str
-*       CLAC       = pif_hat1
-*       CLFP       = pif_hrdy1
-*       CLLP       = pif_hat2
-*       GPIO[42]   = pif_hrdy2
-*
-*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_activatePifInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Activates LCD interface
-*
-*  This function activates LCD interface
-*
-*  @note
-*       When activated, LCD pins will be defined as follows
-*
-*       CLD[17:0]  = LCD data
-*       CLD[23:18] = LCD data
-*       CLPOWER    = LCD power
-*       CLCP       =
-*       CLAC       = LCD ack
-*       CLFP       =
-*       CLLP       =
-*/
-/****************************************************************************/
-static inline void chipcHw_activateLcdInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Deactivates PIF/LCD interface
-*
-*  This function deactivates PIF/LCD interface
-*
-*  @note
-*       When deactivated LCD pins will be in rti-stated
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_deactivatePifLcdInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, 0);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Select GE2
-*
-*  This function select GE2 as the graphic engine
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_selectGE2(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Select GE3
-*
-*  This function select GE3 as the graphic engine
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_selectGE3(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get to know the configuration of GPIO pin
-*
-*/
-/****************************************************************************/
-static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
-{
-	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
-		(chipcHw_REG_GPIO_MUX_MASK <<
-		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
-	    chipcHw_REG_GPIO_MUX_POSITION(pin);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configure GPIO pin function
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setGpioPinFunction(int pin,
-					      chipcHw_GPIO_FUNCTION_e func)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
-	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
-	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin slew rate
-*
-*  This function sets the slew of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinSlewRate(uint32_t pin,
-					  chipcHw_PIN_SLEW_RATE_e slewRate)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
-	    ~(chipcHw_REG_SLEW_RATE_MASK <<
-	      chipcHw_REG_SLEW_RATE_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
-	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin output drive current
-*
-*  This function sets output drive current of individual pin
-*
-*  Note: Avoid the use of the word 'current' since linux headers define this
-*        to be the current task.
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
-					       chipcHw_PIN_CURRENT_STRENGTH_e
-					       curr)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
-	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
-	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin pullup register
-*
-*  This function sets pullup register of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
-	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
-	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin input type
-*
-*  This function sets input type of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinInputType(uint32_t pin,
-					   chipcHw_PIN_INPUTTYPE_e inputType)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
-	    ~(chipcHw_REG_INPUTTYPE_MASK <<
-	      chipcHw_REG_INPUTTYPE_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
-	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Power up the USB PHY
-*
-*  This function powers up the USB PHY
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_powerUpUsbPhy(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl,
-			 chipcHw_REG_MISC_CTRL_USB_POWERON);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Power down the USB PHY
-*
-*  This function powers down the USB PHY
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_powerDownUsbPhy(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl,
-			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set the 2nd USB as host
-*
-*  This function sets the 2nd USB as host
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setUsbHost(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl,
-			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set the 2nd USB as device
-*
-*  This function sets the 2nd USB as device
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setUsbDevice(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl,
-			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Lower layer function to enable/disable a clock of a certain device
-*
-*  This function enables/disables a core clock
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
-				    chipcHw_OPTYPE_e type, int mode)
-{
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		pPLLReg = &pChipcHw->DDRClock;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		break;
-	case chipcHw_CLOCK_VPM:
-		pPLLReg = &pChipcHw->VPMClock;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		switch (type) {
-		case chipcHw_OPTYPE_OUTPUT:
-			/* PLL clock output enable/disable */
-			if (mode) {
-				if (clock == chipcHw_CLOCK_DDR) {
-					/* DDR clock enable is inverted */
-					reg32_modify_and(pPLLReg,
-							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				} else {
-					reg32_modify_or(pPLLReg,
-							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				}
-			} else {
-				if (clock == chipcHw_CLOCK_DDR) {
-					/* DDR clock disable is inverted */
-					reg32_modify_or(pPLLReg,
-							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				} else {
-					reg32_modify_and(pPLLReg,
-							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				}
-			}
-			break;
-		case chipcHw_OPTYPE_BYPASS:
-			/* PLL clock bypass enable/disable */
-			if (mode) {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-			} else {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-			}
-			break;
-		}
-	} else if (pClockCtrl) {
-		switch (type) {
-		case chipcHw_OPTYPE_OUTPUT:
-			if (mode) {
-				reg32_modify_or(pClockCtrl,
-						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
-			} else {
-				reg32_modify_and(pClockCtrl,
-						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
-			}
-			break;
-		case chipcHw_OPTYPE_BYPASS:
-			if (mode) {
-				reg32_modify_or(pClockCtrl,
-						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-			} else {
-				reg32_modify_and(pClockCtrl,
-						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-			}
-			break;
-		}
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables a core clock of a certain device
-*
-*  This function disables a core clock
-*
-*  @note    no change in power consumption
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
-{
-
-	/* Disable output of the clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable a core clock of a certain device
-*
-*  This function enables a core clock
-*
-*  @note    no change in power consumption
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
-{
-
-	/* Enable output of the clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables bypass clock of a certain device
-*
-*  This function enables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
-{
-	/* Enable bypass clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disabled bypass clock of a certain device
-*
-*  This function disables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
-{
-	/* Disable bypass clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
-
-}
-
-/****************************************************************************/
-/**  @brief Checks if software strap is enabled
- *
- *   @return 1 : When enable
- *           0 : When disable
- */
-/****************************************************************************/
-static inline int chipcHw_isSoftwareStrapsEnable(void)
-{
-	return pChipcHw->SoftStraps & 0x00000001;
-}
-
-/****************************************************************************/
-/**  @brief Enable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsEnable(void)
-{
-	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
-}
-
-/****************************************************************************/
-/**  @brief Disable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsDisable(void)
-{
-	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
-}
-
-/****************************************************************************/
-/**  @brief PLL test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestEnable(void)
-{
-	reg32_modify_or(&pChipcHw->PLLConfig,
-			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestEnable(void)
-{
-	reg32_modify_or(&pChipcHw->PLLConfig2,
-			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestDisable(void)
-{
-	reg32_modify_and(&pChipcHw->PLLConfig,
-			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestDisable(void)
-{
-	reg32_modify_and(&pChipcHw->PLLConfig2,
-			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief Get PLL test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPllTestEnable(void)
-{
-	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
-}
-
-/****************************************************************************/
-/**  @brief Get PLL2 test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPll2TestEnable(void)
-{
-	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
-}
-
-/****************************************************************************/
-/**  @brief PLL test select
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestSelect(uint32_t val)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
-	pChipcHw->PLLConfig |=
-	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test select
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestSelect(uint32_t val)
-{
-
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
-	pChipcHw->PLLConfig2 |=
-	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**  @brief Get PLL test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPllTestSelected(void)
-{
-	return (uint8_t) ((pChipcHw->
-			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
-			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
-}
-
-/****************************************************************************/
-/**  @brief Get PLL2 test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPll2TestSelected(void)
-{
-	return (uint8_t) ((pChipcHw->
-			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
-			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
-}
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL1
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll1Disable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL2
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll2Disable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM SW phase alignment interrupt mode
-*
-*  This function sets VPM phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void
-chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
-{
-	REG_LOCAL_IRQ_SAVE;
-	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
-		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
-	} else {
-		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
-	}
-	pChipcHw->VPMPhaseCtrl2 =
-	    (pChipcHw->
-	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
-			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set DDR phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
-{
-	uint32_t ge = 0;
-	uint32_t le = 0;
-
-	switch (margin) {
-	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
-		ge = 0x0F;
-		le = 0x0F;
-		break;
-	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
-		ge = 0x03;
-		le = 0x3F;
-		break;
-	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
-		ge = 0x01;
-		le = 0x7F;
-		break;
-	}
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->DDRPhaseCtrl1 &=
-		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
-		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
-		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
-			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
-
-		pChipcHw->DDRPhaseCtrl1 |=
-		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
-		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
-{
-	uint32_t ge = 0;
-	uint32_t le = 0;
-
-	switch (margin) {
-	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
-		ge = 0x0F;
-		le = 0x0F;
-		break;
-	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
-		ge = 0x03;
-		le = 0x3F;
-		break;
-	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
-		ge = 0x01;
-		le = 0x7F;
-		break;
-	}
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->VPMPhaseCtrl1 &=
-		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
-		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
-		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
-			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
-
-		pChipcHw->VPMPhaseCtrl1 |=
-		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
-		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Checks DDR phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Checks VPM phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
-	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
-	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrPhaseControl(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
-	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmPhaseControl(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
-	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a DDR phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl2 &=
-	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
-	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
-	pChipcHw->DDRPhaseCtrl2 |=
-	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
-	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a VPM phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl2 &=
-	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
-	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
-	pChipcHw->VPMPhaseCtrl2 |=
-	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
-	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clear DDR phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	/* Clear timeout interrupt service bit */
-	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
-	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clear VPM phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	/* Clear timeout interrupt service bit */
-	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
-	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
-	/* Enable timeout interrupt */
-	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
-	/* Enable timeout interrupt */
-	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-#endif /* CHIPC_INLINE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,530 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw_reg.h
-*
-*  @brief   Definitions for low level chip control registers
-*
-*/
-/****************************************************************************/
-#ifndef CHIPCHW_REG_H
-#define CHIPCHW_REG_H
-
-#include <mach/csp/mm_io.h>
-#include <csp/reg.h>
-#include <mach/csp/ddrcReg.h>
-
-#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
-
-typedef struct {
-	uint32_t ChipId;	/* Chip ID */
-	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
-	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
-	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
-	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
-	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
-	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
-	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
-	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
-	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
-	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
-
-	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
-	uint32_t OTPClock;	/* OTP Clock  (Divider) */
-	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
-	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
-	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
-	uint32_t pad1;
-	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
-	uint32_t TSCClock;	/* TSC Clock (Divider) */
-	uint32_t LEDClock;	/* LED Clock (Divider) */
-
-	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
-	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
-	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
-
-	uint32_t BusIntfClock;	/* Bus interface clock */
-
-	uint32_t PLLStatus;	/* PLL status register (PLL1) */
-	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
-	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
-	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
-	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
-	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
-
-	uint32_t I2S1Clock;	/* I2S1 Clock  */
-	uint32_t AudioEnable;	/* Enable/ disable audio channel */
-	uint32_t SoftReset1;	/* Reset blocks */
-	uint32_t SoftReset2;	/* Reset blocks */
-	uint32_t Spare1;	/* Phase align interrupts */
-	uint32_t Sticky;	/* Sticky bits */
-	uint32_t MiscCtrl;	/* Misc. control */
-	uint32_t pad3[3];
-
-	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
-	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
-	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
-	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
-	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
-	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
-
-	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
-	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
-	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
-	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
-	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
-	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
-	uint32_t pad4[9];
-
-	uint32_t SoftOTP1;	/* Software OTP control */
-	uint32_t SoftOTP2;	/* Software OTP control */
-	uint32_t SoftStraps;	/* Software strap */
-	uint32_t PinStraps;	/* Pin Straps */
-	uint32_t DiffOscCtrl;	/* Diff oscillator control */
-	uint32_t DiagsCtrl;	/* Diagnostic control */
-	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
-	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
-
-	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
-
-	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
-	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
-	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
-	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
-	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
-	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
-	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
-	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
-
-	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
-	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
-	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
-	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
-	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
-	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
-	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
-	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
-	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
-	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
-
-	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
-	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
-	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
-	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
-	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
-
-	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
-	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
-	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
-} chipcHw_REG_t;
-
-#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
-#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
-
-#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
-#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
-#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
-#define chipcHw_REG_REV_A0                              0xA00
-#define chipcHw_REG_REV_B0                              0x0B0
-
-#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
-#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
-#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
-#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
-#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
-#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
-#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
-#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
-#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
-#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
-#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
-#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
-#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
-
-#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
-#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
-#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
-#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
-#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
-#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
-#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
-#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
-#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
-#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
-#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
-
-									   00000000 = divide-by-256
-									   00000001 = divide-by-1
-									   00000010 = divide-by-2
-									   00000011 = divide-by-3
-									   00000100 = divide-by-4
-									   00000101 = divide-by-5
-									   00000110 = divide-by-6
-									   .
-									   .
-									   11111011 = divide-by-251
-									   11111100 = divide-by-252
-									   11111101 = divide-by-253
-									   11111110 = divide-by-254
-									 */
-
-#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
-#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
-#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
-#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
-#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
-
-#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
-#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
-#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
-
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
-#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
-#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
-
-#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
-#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
-
-#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
-
-#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
-								   chipcHw_REG_PLL_DIVIDER_FRAC
-								   = 0, when SS is disable
-								 */
-
-#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
-
-#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
-
-/* System booting strap options */
-#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
-
-#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
-
-/* System boot option */
-#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
-#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
-#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
-
-/* NAND Flash page size strap options */
-#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
-#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
-
-#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
-#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
-
-/* Secure boot mode strap options */
-#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
-#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
-#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
-#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
-#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
-
-/* Slave Mode straps */
-#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
-#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
-
-/* Strap pin options */
-#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
-
-/* PIF/LCD pin sharing defines */
-#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
-#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
-
-#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
-
-/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
-#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
-#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
-#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
-#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
-#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
-#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
-#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
-#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
-#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
-#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
-#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
-#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
-#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
-#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
-#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
-#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
-#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
-
-#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
-#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
-							/* Pins beyond 42 are defined by skipping 8 bits within the register */
-#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
-#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
-#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
-
-#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
-#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
-							/* Pins beyond 42 are defined by skipping 8 bits */
-#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
-#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
-
-#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
-#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
-#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
-#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
-							/* Pins beyond 42 are defined by skipping 4 bits */
-#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
-#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
-
-#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
-#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
-#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
-							/* Pins beyond 42 are defined by skipping 2 bits */
-#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
-#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
-
-/* Device connected to the bus clock */
-#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
-#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
-#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
-#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
-#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
-#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
-#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
-#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
-#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
-#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
-#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
-#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
-#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
-#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
-#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
-#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
-#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
-#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
-#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
-#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
-#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
-#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
-#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
-#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
-#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
-#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
-#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
-#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
-#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
-#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
-#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
-#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
-
-/* Software resets defines */
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
-#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
-#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
-#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
-#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
-#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
-#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
-#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
-#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
-#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
-#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
-#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
-#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
-#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
-#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
-#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
-#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
-#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
-#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
-#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
-#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
-#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
-#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
-#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
-#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
-#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
-#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
-#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
-#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
-#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
-#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
-#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
-#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
-#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
-#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
-#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
-#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
-#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
-#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
-#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
-#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
-#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
-#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
-#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
-
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
-#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
-#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
-#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
-
-/* Audio channel control defines */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
-
-/* Misc. chip control defines */
-#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
-#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
-#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
-#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
-#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
-#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
-#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
-#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
-#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
-#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
-#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
-#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
-
-/* OTP configuration defines */
-#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
-#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
-#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
-#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
-#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
-#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
-#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
-#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
-#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
-#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
-#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
-#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
-#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
-#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
-#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
-#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
-#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
-#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
-#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
-#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
-#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
-#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
-#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
-
-/* Sticky bit defines */
-#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
-#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
-#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
-#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
-#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
-#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
-#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
-#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
-#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
-#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
-#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
-#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
-#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
-
-							/* HW phase alignment defines *//* Spare1 register definitions */
-#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
-#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
-#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
-#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
-							/* DDRPhaseCtrl1 register definitions */
-#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
-#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
-#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
-#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
-#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
-							/* VPMPhaseCtrl1 register definitions */
-#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
-#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
-#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
-#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
-#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
-							/* PhaseAlignStatus register definitions */
-#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
-#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
-#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
-#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
-#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
-#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
-#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
-#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
-#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
-#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
-#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
-#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
-#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
-#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
-							/* DDRPhaseCtrl2 register definitions */
-#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
-#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
-#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
-#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
-#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
-#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
-#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
-#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
-							/* VPMPhaseCtrl2 register definitions */
-#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
-#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
-#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
-#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
-#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
-#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
-#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
-#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
-#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
-#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
-#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
-
-#endif /* CHIPCHW_REG_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,872 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    ddrcReg.h
-*
-*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
-*
-*/
-/****************************************************************************/
-
-#ifndef DDRC_REG_H
-#define DDRC_REG_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/reg.h>
-#include <csp/stdint.h>
-
-#include <mach/csp/mm_io.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-/*********************************************************************/
-/* DDR2 Controller (ARM PL341) register definitions */
-/*********************************************************************/
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 DDR2 configuration registers, offset 0x000 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-	typedef struct {
-		uint32_t memcStatus;
-		uint32_t memcCmd;
-		uint32_t directCmd;
-		uint32_t memoryCfg;
-		uint32_t refreshPrd;
-		uint32_t casLatency;
-		uint32_t writeLatency;
-		uint32_t tMrd;
-		uint32_t tRas;
-		uint32_t tRc;
-		uint32_t tRcd;
-		uint32_t tRfc;
-		uint32_t tRp;
-		uint32_t tRrd;
-		uint32_t tWr;
-		uint32_t tWtr;
-		uint32_t tXp;
-		uint32_t tXsr;
-		uint32_t tEsr;
-		uint32_t memoryCfg2;
-		uint32_t memoryCfg3;
-		uint32_t tFaw;
-	} ddrcReg_CTLR_MEMC_REG_t;
-
-#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
-#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
-
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
-
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
-
-#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
-#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
-
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
-
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
-#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
-
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
-
-#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
-#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
-
-#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
-#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
-
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
-
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
-
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
-
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
-
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
-
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
-#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
-#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
-#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_MRD_SHIFT                        0
-#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RAS_SHIFT                        0
-#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RC_SHIFT                         0
-#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RCD_SHIFT                        0
-#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RFC_SHIFT                        0
-#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
-#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RP_SHIFT                         0
-#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RRD_SHIFT                        0
-#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_WR_SHIFT                         0
-#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_WTR_SHIFT                        0
-#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_XP_SHIFT                         0
-#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_XSR_SHIFT                        0
-#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_ESR_SHIFT                        0
-#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
-#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
-#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
-#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_QOS_CNT                            16
-#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
-
-	typedef struct {
-		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
-	} ddrcReg_CTLR_QOS_REG_t;
-
-#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
-#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
-#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
-
-#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
-#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
-
-#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 Memory chip configuration registers, offset 0x200 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_CHIP_CNT                           4
-#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
-
-	typedef struct {
-		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
-	} ddrcReg_CTLR_CHIP_REG_t;
-
-#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
-#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
-
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
-
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 User configuration registers, offset 0x300 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
-
-	typedef struct {
-		uint32_t input;
-		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
-		uint32_t feature;
-	} ddrcReg_CTLR_USER_REG_t;
-
-#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
-#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
-#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
-#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
-
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
-#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
-
-/*********************************************************************/
-/* Broadcom DDR23 PHY register definitions */
-/*********************************************************************/
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* Broadcom DDR23 PHY Address and Control register definitions */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-	typedef struct {
-		uint32_t revision;
-		uint32_t pmCtl;
-		 REG32_RSVD(0x0008, 0x0010);
-		uint32_t pllStatus;
-		uint32_t pllCfg;
-		uint32_t pllPreDiv;
-		uint32_t pllDiv;
-		uint32_t pllCtl1;
-		uint32_t pllCtl2;
-		uint32_t ssCtl;
-		uint32_t ssCfg;
-		uint32_t vdlStatic;
-		uint32_t vdlDynamic;
-		uint32_t padIdle;
-		uint32_t pvtComp;
-		uint32_t padDrive;
-		uint32_t clkRgltrCtl;
-	} ddrcReg_PHY_ADDR_CTL_REG_t;
-
-#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
-#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
-
-/* @todo These SS definitions are duplicates of ones below */
-
-#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
-#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
-#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
-#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
-#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
-#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
-
-/* ----------------------------------------------------- */
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* Broadcom DDR23 PHY Byte Lane register definitions */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_CNT                       2
-#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
-
-	typedef struct {
-		uint32_t revision;
-		uint32_t vdlCalibrate;
-		uint32_t vdlStatus;
-		 REG32_RSVD(0x000c, 0x0010);
-		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
-		uint32_t readCtl;
-		uint32_t readStatus;
-		uint32_t readClear;
-		uint32_t padIdleCtl;
-		uint32_t padDriveCtl;
-		uint32_t padClkCtl;
-		uint32_t writeCtl;
-		uint32_t clkRegCtl;
-	} ddrcReg_PHY_BYTE_LANE_REG_t;
-
-/* There are 2 instances of the byte Lane registers, one for each byte lane. */
-#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
-#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
-
-#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
-#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
-
-/* ----------------------------------------------------- */
-
-/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
-/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
-/* register. The fine rise and fall are no longer used, so add some definitions for just */
-/* the step setting to simplify things. */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
-#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
-
-/*********************************************************************/
-/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
-/*********************************************************************/
-
-	typedef struct {
-		uint32_t cfg;
-		uint32_t actMonCnt;
-		uint32_t ctl;
-		uint32_t lbistCtl;
-		uint32_t lbistSeed;
-		uint32_t lbistStatus;
-		uint32_t tieOff;
-		uint32_t actMonClear;
-		uint32_t status;
-		uint32_t user;
-	} ddrcReg_CTLR_PHY_GLUE_REG_t;
-
-#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
-#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
-
-/* ----------------------------------------------------- */
-
-/* DDR2 / AXI block phase alignment interrupt control */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
-
-/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
-/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
-/* controller. If 2 chips selects are being used, then software control must be enabled. */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
-
-/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
-
-/* Chip select count */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
-#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
-
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#ifdef __cplusplus
-}				/* end extern "C" */
-#endif
-#endif				/* DDRC_REG_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,145 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_priv.h
-*
-*  @brief   Private Definitions for low level DMA driver
-*
-*/
-/****************************************************************************/
-
-#ifndef _DMACHW_PRIV_H
-#define _DMACHW_PRIV_H
-
-#include <csp/stdint.h>
-
-/* Data type for DMA Link List Item */
-typedef struct {
-	uint32_t sar;		/* Source Address Register.
-				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
-	uint32_t dar;		/* Destination Address Register.
-				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
-	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
-				   Address MUST be aligned to a 32-bit boundary.             */
-	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
-	uint32_t sstat;		/* Source Status Register */
-	uint32_t dstat;		/* Destination Status Register */
-	uint32_t devCtl;	/* Device specific control information */
-	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
-} dmacHw_DESC_t;
-
-/*
- *  Descriptor ring pointers
- */
-typedef struct {
-	int num;		/* Number of link items */
-	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
-	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
-	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
-	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
-	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
-	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
-} dmacHw_DESC_RING_t;
-
-/*
- *  DMA channel control block
- */
-typedef struct {
-	uint32_t module;	/* DMA controller module (0-1) */
-	uint32_t channel;	/* DMA channel (0-7) */
-	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
-	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
-	void *userData;		/* Channel specifc user data */
-} dmacHw_CBLK_t;
-
-#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
-#define dmacHw_MAX_CHANNEL_COUNT          16
-#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
-#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
-#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
-#define dmacHw_MAX_BLOCKSIZE              4064
-#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
-#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
-#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
-#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
-#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
-#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
-
-/****************************************************************************/
-/**
-*  @brief   Get next available transaction width
-*
-*
-*  @return  On success  : Next available transaction width
-*           On failure : dmacHw_TRANSACTION_WIDTH_8
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
-    ) {
-	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
-		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
-			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
-	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
-		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
-			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
-	}
-
-	/* Default return  */
-	return dmacHw_SRC_TRANSACTION_WIDTH_8;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get number of bytes per transaction
-*
-*  @return  Number of bytes per transaction
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
-    ) {
-	int width = 1;
-	switch (tw) {
-	case dmacHw_SRC_TRANSACTION_WIDTH_8:
-		width = 1;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_16:
-	case dmacHw_DST_TRANSACTION_WIDTH_16:
-		width = 2;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_32:
-	case dmacHw_DST_TRANSACTION_WIDTH_32:
-		width = 4;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_64:
-	case dmacHw_DST_TRANSACTION_WIDTH_64:
-		width = 8;
-		break;
-	default:
-		dmacHw_ASSERT(0);
-	}
-
-	/* Default transaction width */
-	return width;
-}
-
-#endif /* _DMACHW_PRIV_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,406 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_reg.h
-*
-*  @brief   Definitions for low level DMA registers
-*
-*/
-/****************************************************************************/
-
-#ifndef _DMACHW_REG_H
-#define _DMACHW_REG_H
-
-#include <csp/stdint.h>
-#include <mach/csp/mm_io.h>
-
-/* Data type for 64 bit little endian register */
-typedef struct {
-	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
-	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
-} dmacHw_REG64_t;
-
-/* Data type representing DMA channel registers */
-typedef struct {
-	dmacHw_REG64_t ChannelSar;	/*  Source Address Register. 64 bits (upper 32 bits are reserved)
-					   Address must be aligned to CTLx.SRC_TR_WIDTH.
-					 */
-	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
-					   Address must be aligned to CTLx.DST_TR_WIDTH.
-					 */
-	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
-					   LLP contains the pointer to the next LLI for block chaining using linked lists.
-					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
-					   Address MUST be aligned to a 32-bit boundary.
-					 */
-	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
-	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
-	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
-	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
-	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
-	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
-	dmacHw_REG64_t SrcGather;	/* Source gather register */
-	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
-} dmacHw_CH_REG_t;
-
-/* Data type for RAW interrupt status registers */
-typedef struct {
-	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
-	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
-	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
-	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
-	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
-} dmacHw_INT_RAW_t;
-
-/* Data type for interrupt status registers */
-typedef struct {
-	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
-	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
-	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
-	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
-	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
-} dmacHw_INT_STATUS_t;
-
-/* Data type for interrupt mask registers*/
-typedef struct {
-	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
-	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
-	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
-	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
-	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
-} dmacHw_INT_MASK_t;
-
-/* Data type for interrupt clear registers */
-typedef struct {
-	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
-	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
-	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
-	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
-	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
-	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
-} dmacHw_INT_CLEAR_t;
-
-/* Data type for software handshaking registers */
-typedef struct {
-	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
-	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
-	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
-	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
-	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
-	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
-} dmacHw_SW_HANDSHAKE_t;
-
-/* Data type for misc. registers */
-typedef struct {
-	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
-	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
-	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
-	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
-	dmacHw_REG64_t Reserved0;	/* Reserved */
-	dmacHw_REG64_t Reserved1;	/* Reserved */
-	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
-	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
-	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
-	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
-	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
-	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
-	dmacHw_REG64_t CompId;	/* Compoent ID */
-} dmacHw_MISC_t;
-
-/* Base registers */
-#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
-#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
-
-extern uint32_t dmaChannelCount_0;
-extern uint32_t dmaChannelCount_1;
-
-/* Define channel specific registers */
-#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
-
-/* Raw interrupt status registers */
-#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
-#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
-#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
-#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
-#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
-#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
-
-/* Interrupt status registers */
-#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
-#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
-#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
-#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
-#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
-#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
-
-/* Interrupt status registers */
-#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
-#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
-#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
-#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
-#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
-#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
-
-/* Interrupt clear registers */
-#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
-#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
-#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
-#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
-#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
-#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
-#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
-
-/* Software handshaking registers */
-#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
-#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
-
-/* Miscellaneous registers */
-#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
-#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
-#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
-#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
-#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
-#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
-#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
-#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
-#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
-#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
-#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
-#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
-#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
-#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
-#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
-
-/* Channel control registers */
-#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
-#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
-#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
-
-#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
-#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
-
-#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
-#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
-#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
-#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
-
-#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
-#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
-
-#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
-#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
-
-#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
-#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
-
-#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
-#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
-
-/* Bit mask for REG_DMACx_CTL_LO */
-
-#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
-
-#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
-#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
-
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
-
-#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
-#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
-
-#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
-#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
-#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
-#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
-
-#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
-#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
-#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
-#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
-
-#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
-#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
-#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
-#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
-#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
-
-#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
-#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
-#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
-#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
-#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
-
-#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
-#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
-
-#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
-#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
-#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
-
-#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
-#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
-#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
-
-#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
-#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
-
-/* Bit mask for REG_DMACx_CTL_HI */
-#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
-#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
-
-/* Bit mask for REG_DMACx_CFG_LO */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
-
-#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
-#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
-#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
-#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
-
-#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
-#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
-#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
-#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
-#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
-
-#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
-
-#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
-#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
-
-#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
-
-#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
-#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
-
-/* Bit mask for REG_DMACx_CFG_HI */
-#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
-#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
-
-#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
-
-#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
-#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
-
-#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
-#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
-
-/* DMA Configuration Parameters */
-#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
-#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
-#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
-#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
-
-/* Define GET/SET macros to program the registers */
-#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
-
-#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
-#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
-
-#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
-
-#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
-#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
-#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
-
-#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
-#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
-#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
-
-#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
-#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
-
-#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
-#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
-#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
-#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
-#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
-#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
-
-#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
-#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
-#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
-#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
-#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
-#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
-#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
-
-#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
-#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
-
-#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-
-#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
-
-#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
-#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
-#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
-
-#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
-#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
-#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
-#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
-
-#endif /* _DMACHW_REG_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,73 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_HW_CFG_H
-#define CSP_HW_CFG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <cfg_global.h>
-#include <mach/csp/cap_inline.h>
-
-#if defined(__KERNEL__)
-#include <mach/memory_settings.h>
-#else
-#include <hw_cfg.h>
-#endif
-
-/* Some items that can be defined externally, but will be set to default values */
-/* if they are not defined. */
-/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
-/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
-/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
-/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
-/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
-/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
-/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
-
-#if defined(CFG_GLOBAL_CHIP)
-  #if (CFG_GLOBAL_CHIP == FPGA11107)
-     #define HW_CFG_BUS_CLK_HZ            5000000
-     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
-     #define HW_CFG_DDR_PHY_OMIT
-     #define HW_CFG_UART_CLK_HZ           7500000
-  #else
-     #define HW_CFG_PLL_VCO_HZ           2000000000
-     #define HW_CFG_PLL2_VCO_HZ          1800000000
-     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
-     #define HW_CFG_BUS_CLK_HZ            166666666
-     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
-     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
-     #define HW_CFG_UART_CLK_HZ           142857142
-     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
-  #endif
-#else
-   #define HW_CFG_PLL_VCO_HZ           1800000000
-   #define HW_CFG_PLL2_VCO_HZ          1800000000
-   #define HW_CFG_ARM_CLK_HZ            450000000
-   #define HW_CFG_BUS_CLK_HZ            150000000
-   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
-   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
-   #define HW_CFG_UART_CLK_HZ           150000000
-   #define HW_CFG_VPM_CLK_HZ            300000000
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_HW_CFG_H */
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,246 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    intcHw_reg.h
-*
-*  @brief   platform specific interrupt controller bit assignments
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_REG_H
-#define _INTCHW_REG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/reg.h>
-#include <mach/csp/mm_io.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
-#define INTCHW_NUM_INTC           3
-
-/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
-#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
-#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
-#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
-
-/* INTC0 - interrupt controller 0 */
-#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
-#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
-#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
-#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
-#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
-#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
-#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
-#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
-#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
-#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
-#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
-#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
-#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
-#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
-#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
-#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
-#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
-#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
-#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
-#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
-#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
-#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
-#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
-#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
-#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
-#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
-#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
-#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
-#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
-#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
-#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
-#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
-
-#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
-#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
-#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
-#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
-#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
-#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
-#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
-#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
-#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
-#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
-#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
-#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
-#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
-#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
-#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
-#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
-#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
-#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
-#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
-#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
-#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
-#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
-#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
-#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
-#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
-#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
-#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
-#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
-#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
-#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
-#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
-#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
-
-/* INTC1 - interrupt controller 1 */
-#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interrupt (For A0 only)) */
-#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
-#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
-/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
-#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
-#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
-#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
-#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
-#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
-#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
-#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
-#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
-#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
-#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
-#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
-
-#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
-#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
-#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
-#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
-#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
-#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
-#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
-#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
-#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
-#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
-#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
-#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
-#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
-
-#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
-#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
-#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
-#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
-#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
-#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
-#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
-#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
-#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
-#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
-#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
-#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
-#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
-#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
-#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
-#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
-#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
-#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
-#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
-#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
-#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
-#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
-#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
-#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
-#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
-#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
-#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
-#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
-#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
-
-/* SINTC secure int controller */
-#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
-#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
-#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
-#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
-#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
-#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
-#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
-#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
-#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
-#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
-#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
-#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
-#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
-#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
-#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
-#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
-
-#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
-#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
-#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
-#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
-#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
-#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
-#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
-#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
-#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
-#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
-#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
-#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
-#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
-#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
-#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
-#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
-
-/* PL192 Vectored Interrupt Controller (VIC) layout */
-#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
-#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
-#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
-#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
-#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
-#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
-#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
-#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
-#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
-#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
-#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
-#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
-#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
-#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
-#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
-#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
-
-/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
-/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
-/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
-/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-/* Clear one or more IRQ interrupts. */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask)
-{
-	__REG32(basep + INTCHW_INTENCLEAR) = mask;
-}
-
-/* Enables one or more IRQ interrupts. */
-static inline void intcHw_irq_enable(void *basep, uint32_t mask)
-{
-	__REG32(basep + INTCHW_INTENABLE) = mask;
-}
-
-#endif /* _INTCHW_REG_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,101 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    mm_addr.h
-*
-*  @brief   Memory Map address definitions
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _MM_ADDR_H
-#define _MM_ADDR_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-/*  Memory Map address definitions */
-
-#define MM_ADDR_DDR                0x00000000
-
-#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
-
-#define MM_ADDR_IO_FLASHC          0x20000000
-#define MM_ADDR_IO_BROM            0x30000000
-#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
-#define MM_ADDR_IO_DMA0            0x30200000
-#define MM_ADDR_IO_DMA1            0x30300000
-#define MM_ADDR_IO_ESW             0x30400000
-#define MM_ADDR_IO_CLCD            0x30500000
-#define MM_ADDR_IO_PIF             0x30580000
-#define MM_ADDR_IO_APM             0x30600000
-#define MM_ADDR_IO_SPUM            0x30700000
-#define MM_ADDR_IO_VPM_PROG        0x30800000
-#define MM_ADDR_IO_VPM_DATA        0x30A00000
-#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
-#define MM_ADDR_IO_CHIPC           0x80000000
-#define MM_ADDR_IO_UMI             0x80001000
-#define MM_ADDR_IO_NAND            0x80001800
-#define MM_ADDR_IO_LEDM            0x80002000
-#define MM_ADDR_IO_PWM             0x80002040
-#define MM_ADDR_IO_VINTC           0x80003000
-#define MM_ADDR_IO_GPIO0           0x80004000
-#define MM_ADDR_IO_GPIO1           0x80004800
-#define MM_ADDR_IO_I2CS            0x80005000
-#define MM_ADDR_IO_SPIS            0x80006000
-#define MM_ADDR_IO_HPM             0x80007400
-#define MM_ADDR_IO_HPM_REMAP       0x80007800
-#define MM_ADDR_IO_TZPC            0x80008000
-#define MM_ADDR_IO_MPU             0x80009000
-#define MM_ADDR_IO_SPUMP           0x8000a000
-#define MM_ADDR_IO_PKA             0x8000b000
-#define MM_ADDR_IO_RNG             0x8000c000
-#define MM_ADDR_IO_KEYC            0x8000d000
-#define MM_ADDR_IO_BBL             0x8000e000
-#define MM_ADDR_IO_OTP             0x8000f000
-#define MM_ADDR_IO_I2S0            0x80010000
-#define MM_ADDR_IO_I2S1            0x80011000
-#define MM_ADDR_IO_UARTA           0x80012000
-#define MM_ADDR_IO_UARTB           0x80013000
-#define MM_ADDR_IO_I2CH            0x80014020
-#define MM_ADDR_IO_SPIH            0x80015000
-#define MM_ADDR_IO_TSC             0x80016000
-#define MM_ADDR_IO_TMR             0x80017000
-#define MM_ADDR_IO_WATCHDOG        0x80017800
-#define MM_ADDR_IO_ETM             0x80018000
-#define MM_ADDR_IO_DDRC            0x80019000
-#define MM_ADDR_IO_SINTC           0x80100000
-#define MM_ADDR_IO_INTC0           0x80200000
-#define MM_ADDR_IO_INTC1           0x80201000
-#define MM_ADDR_IO_GE              0x80300000
-#define MM_ADDR_IO_USB_CTLR0       0x80400000
-#define MM_ADDR_IO_USB_CTLR1       0x80410000
-#define MM_ADDR_IO_USB_PHY         0x80420000
-#define MM_ADDR_IO_SDIOH0          0x80500000
-#define MM_ADDR_IO_SDIOH1          0x80600000
-#define MM_ADDR_IO_VDEC            0x80700000
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* _MM_ADDR_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_io.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/mm_io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,147 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    mm_io.h
-*
-*  @brief   Memory Map I/O definitions
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _MM_IO_H
-#define _MM_IO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/mm_addr.h>
-
-#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(CONFIG_MMU)
-
-/* This macro is referenced in <mach/io.h>
- * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
- * This macro is referenced in <asm/arch/io.h>
- *
- * Assume VPM address is the last x MB of memory.  For VPM, map to
- * 0xf0000000 and up.
- */
-
-#ifndef MM_IO_PHYS_TO_VIRT
-#ifdef __ASSEMBLY__
-#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
-#else
-#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
-			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
-#endif
-#endif
-
-/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
-
-#ifndef MM_IO_VIRT_TO_PHYS
-#ifdef __ASSEMBLY__
-#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
-#else
-#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
-			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
-#endif
-#endif
-
-#else
-
-#ifndef MM_IO_PHYS_TO_VIRT
-#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
-#endif
-
-#ifndef MM_IO_VIRT_TO_PHYS
-#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
-#endif
-
-#endif
-
-/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
-#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
-#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
-#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
-
-#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
-#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
-
-#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
-#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
-#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
-#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
-#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
-#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
-#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
-#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
-#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
-#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
-#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
-
-#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
-
-#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
-#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
-#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
-#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
-#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
-#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
-#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
-#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
-#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
-#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
-#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
-#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
-#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
-#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
-#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
-#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
-#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
-#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
-#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
-#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
-#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
-#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
-#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
-#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
-#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
-#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
-#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
-#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
-#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
-#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
-#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
-#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
-#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
-#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
-#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
-#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
-#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
-#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
-#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
-
-#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* _MM_IO_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,100 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw_def.h
-*
-*  @brief   Definitions for configuring/testing secure blocks
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef SECHW_DEF_H
-#define SECHW_DEF_H
-
-#include <mach/csp/mm_io.h>
-
-/* Bit mask for various secure device */
-#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
-#define secHw_BLK_MASK_KEY_SCAN         0x00000002
-#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
-#define secHw_BLK_MASK_UART0            0x00000008
-#define secHw_BLK_MASK_UART1            0x00000010
-#define secHw_BLK_MASK_WATCHDOG         0x00000020
-#define secHw_BLK_MASK_SPUM             0x00000040
-#define secHw_BLK_MASK_DDR2             0x00000080
-#define secHw_BLK_MASK_EXT_MEM          0x00000100
-#define secHw_BLK_MASK_ESW              0x00000200
-#define secHw_BLK_MASK_SPU              0x00010000
-#define secHw_BLK_MASK_PKA              0x00020000
-#define secHw_BLK_MASK_RNG              0x00040000
-#define secHw_BLK_MASK_RTC              0x00080000
-#define secHw_BLK_MASK_OTP              0x00100000
-#define secHw_BLK_MASK_BOOT             0x00200000
-#define secHw_BLK_MASK_MPU              0x00400000
-#define secHw_BLK_MASK_TZCTRL           0x00800000
-#define secHw_BLK_MASK_INTR             0x01000000
-
-/* Trustzone register set */
-typedef struct {
-	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
-	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
-	volatile uint32_t setSecure;	/* write only. reads back as 0 */
-} secHw_TZREG_t;
-
-/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
-/* is for the higher 16 bits. */
-
-typedef enum {
-	secHw_IDX_LS = 0,
-	secHw_IDX_MS = 1,
-	secHw_IDX_NUM
-} secHw_IDX_e;
-
-typedef struct {
-	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
-} secHw_REGS_t;
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a non-secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
-*
-*/
-/****************************************************************************/
-static inline uint32_t secHw_getStatus(void);
-
-#include <mach/csp/secHw_inline.h>
-
-#endif /* SECHW_DEF_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,79 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw_inline.h
-*
-*  @brief   Definitions for configuring/testing secure blocks
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef SECHW_INLINE_H
-#define SECHW_INLINE_H
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    ) {
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	if (mask & 0x0000FFFF) {
-		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
-	}
-
-	if (mask & 0xFFFF0000) {
-		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a non-secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    ) {
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	if (mask & 0x0000FFFF) {
-		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
-	}
-	if (mask & 0xFFFF0000) {
-		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
-*
-*/
-/****************************************************************************/
-static inline uint32_t secHw_getStatus(void)
-{
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	return (regp->reg[1].status << 16) + regp->reg[0].status;
-}
-
-#endif /* SECHW_INLINE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,82 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw_reg.h
-*
-*  @brief   Definitions for low level Timer registers
-*
-*/
-/****************************************************************************/
-#ifndef _TMRHW_REG_H
-#define _TMRHW_REG_H
-
-#include <mach/csp/mm_io.h>
-#include <mach/csp/hw_cfg.h>
-/* Base address */
-#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
-
-/*
-This platform has four different timers running at different clock speed
-
-Timer one   (Timer ID 0) runs at  25 MHz
-Timer two   (Timer ID 1) runs at  25 MHz
-Timer three (Timer ID 2) runs at 150 MHz
-Timer four  (Timer ID 3) runs at 150 MHz
-*/
-#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
-#define tmrHw_LOW_FREQUENCY_HZ          25000000
-
-#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
-#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
-#define tmrHw_HIGH_FREQUENCY_HZ         150000000
-#else
-#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
-#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
-#endif
-
-#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
-#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
-#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
-#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
-
-typedef struct {
-	uint32_t LoadValue;	/* Load value for timer */
-	uint32_t CurrentValue;	/* Current value for timer */
-	uint32_t Control;	/* Control register */
-	uint32_t InterruptClear;	/* Interrupt clear register */
-	uint32_t RawInterruptStatus;	/* Raw interrupt status */
-	uint32_t InterruptStatus;	/* Masked interrupt status */
-	uint32_t BackgroundLoad;	/* Background load value */
-	uint32_t padding;	/* Padding register */
-} tmrHw_REG_t;
-
-/* Control bot masks */
-#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
-#define tmrHw_CONTROL_PERIODIC                0x00000040
-#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
-#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
-#define tmrHw_CONTROL_PRESCALE_1              0x00000000
-#define tmrHw_CONTROL_PRESCALE_16             0x00000004
-#define tmrHw_CONTROL_PRESCALE_256            0x00000008
-#define tmrHw_CONTROL_32BIT                   0x00000002
-#define tmrHw_CONTROL_ONESHOT                 0x00000001
-#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
-
-#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
-
-#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
-
-#endif /* _TMRHW_REG_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/dma.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/dma.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/dma.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/dma.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,630 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma.h
-*
-*   @brief  API definitions for the linux DMA interface.
-*/
-/****************************************************************************/
-
-#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
-#define ASM_ARM_ARCH_BCMRING_DMA_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <linux/kernel.h>
-#include <linux/semaphore.h>
-#include <csp/dmacHw.h>
-#include <mach/timer.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
-/* and line number of the reservation request will be recorded in the channel table */
-
-#define DMA_DEBUG_TRACK_RESERVATION   1
-
-#define DMA_NUM_CONTROLLERS     2
-#define DMA_NUM_CHANNELS        8	/* per controller */
-
-typedef enum {
-	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
-	DMA_DEVICE_I2S0_DEV_TO_MEM,
-	DMA_DEVICE_I2S0_MEM_TO_DEV,
-	DMA_DEVICE_I2S1_DEV_TO_MEM,
-	DMA_DEVICE_I2S1_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
-	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
-	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
-	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
-	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
-	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
-	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
-	DMA_DEVICE_SPUM_DEV_TO_MEM,
-	DMA_DEVICE_SPUM_MEM_TO_DEV,
-	DMA_DEVICE_SPIH_DEV_TO_MEM,
-	DMA_DEVICE_SPIH_MEM_TO_DEV,
-	DMA_DEVICE_UART_A_DEV_TO_MEM,
-	DMA_DEVICE_UART_A_MEM_TO_DEV,
-	DMA_DEVICE_UART_B_DEV_TO_MEM,
-	DMA_DEVICE_UART_B_MEM_TO_DEV,
-	DMA_DEVICE_PIF_MEM_TO_DEV,
-	DMA_DEVICE_PIF_DEV_TO_MEM,
-	DMA_DEVICE_ESW_DEV_TO_MEM,
-	DMA_DEVICE_ESW_MEM_TO_DEV,
-	DMA_DEVICE_VPM_MEM_TO_MEM,
-	DMA_DEVICE_CLCD_MEM_TO_MEM,
-	DMA_DEVICE_NAND_MEM_TO_MEM,
-	DMA_DEVICE_MEM_TO_VRAM,
-	DMA_DEVICE_VRAM_TO_MEM,
-
-	/* Add new entries before this line. */
-
-	DMA_NUM_DEVICE_ENTRIES,
-	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
-
-} DMA_Device_t;
-
-/****************************************************************************
-*
-*   The DMA_Handle_t is the primary object used by callers of the API.
-*
-*****************************************************************************/
-
-#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
-
-typedef int DMA_Handle_t;
-
-/****************************************************************************
-*
-*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
-*   to point to regions of memory.
-*
-*****************************************************************************/
-
-typedef struct {
-	void *virtAddr;		/* Virtual Address of the descriptor ring */
-	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
-	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
-	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
-
-} DMA_DescriptorRing_t;
-
-/****************************************************************************
-*
-*   The DMA_DeviceAttribute_t contains information which describes a
-*   particular DMA device (or peripheral).
-*
-*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
-*   statically initialized.
-*
-*****************************************************************************/
-
-/* The device handler is called whenever a DMA operation completes. The reaon */
-/* for it to be called will be a bitmask with one or more of the following bits */
-/* set. */
-
-#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
-#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
-#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
-
-typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
-				     void *userData);
-
-#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
-#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
-#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
-#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
-#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
-#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
-#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
-#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
-
-/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
-/*       determine which DMA controllers a given device can be used from, and the interface */
-/*       array determeines the actual interface number to use for a given controller. */
-
-typedef struct {
-	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
-	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
-	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
-	const char *name;	/* Will show up in the /proc entry */
-
-	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
-
-	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
-
-	void *userData;		/* Passed to the devHandler */
-	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
-
-	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
-
-	/* The following statistical information will be collected and presented in a proc entry. */
-	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
-	/*       a 64 bit counter. */
-
-	uint64_t numTransfers;	/* Number of DMA transfers performed */
-	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
-	uint64_t transferBytes;	/* Total bytes transferred */
-	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
-	uint32_t numBytes;	/* Last transfer size */
-
-	/* It's not possible to free memory which is allocated for the descriptors from within */
-	/* the ISR. So make the presumption that a given device will tend to use the */
-	/* same sized buffers over and over again, and we keep them around. */
-
-	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
-
-	/* We stash away some of the information from the previous transfer. If back-to-back */
-	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
-	/* the descriptor buffers. */
-
-	uint32_t prevNumBytes;
-	dma_addr_t prevSrcData;
-	dma_addr_t prevDstData;
-
-} DMA_DeviceAttribute_t;
-
-/****************************************************************************
-*
-*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
-*   data structures and don't belong in this header file, but are included
-*   merely for discussion.
-*
-*   By the time this is implemented, these structures will be moved out into
-*   the appropriate C source file instead.
-*
-*****************************************************************************/
-
-/****************************************************************************
-*
-*   The DMA_Channel_t contains state information about each DMA channel. Some
-*   of the channels are dedicated. Non-dedicated channels are shared
-*   amongst the other devices.
-*
-*****************************************************************************/
-
-#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
-#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
-#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
-#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
-
-typedef struct {
-	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
-	DMA_Device_t devType;	/* Device this channel is currently reserved for */
-	DMA_Device_t lastDevType;	/* Device type that used this previously */
-	char name[20];		/* Name passed onto request_irq */
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-	const char *fileName;	/* Place where channel reservation took place */
-	int lineNum;		/* Place where channel reservation took place */
-#endif
-	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
-
-} DMA_Channel_t;
-
-/****************************************************************************
-*
-*   The DMA_Controller_t contains state information about each DMA controller.
-*
-*   The freeChannelQ is stored in the controller data structure rather than
-*   the channel data structure since several of the devices are accessible
-*   from multiple controllers, and there is no way to know which controller
-*   will become available first.
-*
-*****************************************************************************/
-
-typedef struct {
-	DMA_Channel_t channel[DMA_NUM_CHANNELS];
-
-} DMA_Controller_t;
-
-/****************************************************************************
-*
-*   The DMA_Global_t contains all of the global state information used by
-*   the DMA code.
-*
-*   Callers which need to allocate a shared channel will be queued up
-*   on the freeChannelQ until a channel becomes available.
-*
-*****************************************************************************/
-
-typedef struct {
-	struct semaphore lock;	/* acquired when manipulating table entries */
-	wait_queue_head_t freeChannelQ;
-
-	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
-
-} DMA_Global_t;
-
-/* ---- Variable Externs ------------------------------------------------- */
-
-extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
-
-/* ---- Function Prototypes ---------------------------------------------- */
-
-#if defined(__KERNEL__)
-
-/****************************************************************************/
-/**
-*   Initializes the DMA module.
-*
-*   @return
-*       0       - Success
-*       < 0     - Error
-*/
-/****************************************************************************/
-
-int dma_init(void);
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
-				     int lineNum);
-#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
-#else
-
-/****************************************************************************/
-/**
-*   Reserves a channel for use with @a dev. If the device is setup to use
-*   a shared channel, then this function will block until a free channel
-*   becomes available.
-*
-*   @return
-*       >= 0    - A valid DMA Handle.
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
-    );
-#endif
-
-/****************************************************************************/
-/**
-*   Frees a previously allocated DMA Handle.
-*
-*   @return
-*        0      - DMA Handle was released successfully.
-*       -EINVAL - Invalid DMA handle
-*/
-/****************************************************************************/
-
-int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
-    );
-
-/****************************************************************************/
-/**
-*   Determines if a given device has been configured as using a shared
-*   channel.
-*
-*   @return boolean
-*       0           Device uses a dedicated channel
-*       non-zero    Device uses a shared channel
-*/
-/****************************************************************************/
-
-int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates memory to hold a descriptor ring. The descriptor ring then
-*   needs to be populated by making one or more calls to
-*   dna_add_descriptors.
-*
-*   The returned descriptor ring will be automatically initialized.
-*
-*   @return
-*       0           Descriptor ring was allocated successfully
-*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
-			      int numDescriptors	/* Number of descriptors that need to be allocated. */
-    );
-
-/****************************************************************************/
-/**
-*   Releases the memory which was previously allocated for a descriptor ring.
-*/
-/****************************************************************************/
-
-void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
-    );
-
-/****************************************************************************/
-/**
-*   Initializes a descriptor ring, so that descriptors can be added to it.
-*   Once a descriptor ring has been allocated, it may be reinitialized for
-*   use with additional/different regions of memory.
-*
-*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
-*   initialize the ring with a smaller number of descriptors. The amount
-*   of memory allocated for the descriptor ring will not be reduced, and
-*   the descriptor ring may be reinitialized later
-*
-*   @return
-*       0           Descriptor ring was initialized successfully
-*       -ENOMEM     The descriptor which was passed in has insufficient space
-*                   to hold the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
-			     int numDescriptors	/* Number of descriptors to initialize. */
-    );
-
-/****************************************************************************/
-/**
-*   Determines the number of descriptors which would be required for a
-*   transfer of the indicated memory region.
-*
-*   This function also needs to know which DMA device this transfer will
-*   be destined for, so that the appropriate DMA configuration can be retrieved.
-*   DMA parameters such as transfer width, and whether this is a memory-to-memory
-*   or memory-to-peripheral, etc can all affect the actual number of descriptors
-*   required.
-*
-*   @return
-*       > 0     Returns the number of descriptors required for the indicated transfer
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
-				   dma_addr_t srcData,	/* Place to get data to write to device */
-				   dma_addr_t dstData,	/* Pointer to device data address */
-				   size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to the descriptor ring. Note that it may take
-*   multiple descriptors for each region of memory. It is the callers
-*   responsibility to allocate a sufficiently large descriptor ring.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
-			DMA_Device_t device,	/* DMA Device that descriptors are for */
-			dma_addr_t srcData,	/* Place to get data (memory or device) */
-			dma_addr_t dstData,	/* Place to put data (memory or device) */
-			size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Sets the descriptor ring associated with a device.
-*
-*   Once set, the descriptor ring will be associated with the device, even
-*   across channel request/free calls. Passing in a NULL descriptor ring
-*   will release any descriptor ring currently associated with the device.
-*
-*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
-*         the descriptor ring may be released and reallocated.
-*
-*   Note: This function will release the descriptor memory for any current
-*         descriptor ring associated with this device.
-*/
-/****************************************************************************/
-
-int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
-    );
-
-/****************************************************************************/
-/**
-*   Retrieves the descriptor ring associated with a device.
-*/
-/****************************************************************************/
-
-int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates buffers for the descriptors. This is normally done automatically
-*   but needs to be done explicitly when initiating a dma from interrupt
-*   context.
-*
-*   @return
-*       0       Descriptors were allocated successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-			  dma_addr_t srcData,	/* Place to get data to write to device */
-			  dma_addr_t dstData,	/* Pointer to device data address */
-			  size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates and sets up descriptors for a double buffered circular buffer.
-*
-*   This is primarily intended to be used for things like the ingress samples
-*   from a microphone.
-*
-*   @return
-*       > 0     Number of descriptors actually allocated.
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-				     dma_addr_t srcData,	/* Physical address of source data */
-				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
-				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
-				     size_t numBytes	/* Number of bytes in each destination buffer */
-    );
-
-/****************************************************************************/
-/**
-*   Initiates a transfer when the descriptors have already been setup.
-*
-*   This is a special case, and normally, the dma_transfer_xxx functions should
-*   be used.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_start_transfer(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Stops a previously started DMA transfer.
-*
-*   @return
-*       0       Transfer was stopped successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_stop_transfer(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Waits for a DMA to complete by polling. This function is only intended
-*   to be used for testing. Interrupts should be used for most DMA operations.
-*/
-/****************************************************************************/
-
-int dma_wait_transfer_done(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Initiates a DMA transfer
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*/
-/****************************************************************************/
-
-int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
-		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-		 dma_addr_t srcData,	/* Place to get data to write to device */
-		 dma_addr_t dstData,	/* Pointer to device data address */
-		 size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Initiates a transfer from memory to a device.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
-					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
-					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
-					 size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Initiates a transfer from a device to memory.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
-					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
-					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
-					   size_t numBytes	/* Number of bytes to retrieve from the device */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Initiates a memory to memory transfer.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
-					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
-					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
-					  size_t numBytes	/* Number of bytes to transfer */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Set the callback function which will be called when a transfer completes.
-*   If a NULL callback function is set, then no callback will occur.
-*
-*   @note   @a devHandler will be called from IRQ context.
-*
-*   @return
-*       0       - Success
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
-			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
-			   void *userData	/* Pointer which will be passed to devHandler. */
-    );
-
-#endif
-
-#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/entry-macro.S linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/entry-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/entry-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/entry-macro.S	1969-12-31 19:00:00.000000000 -0500
@@ -1,76 +0,0 @@
-/*****************************************************************************
-* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
- *
- * Low-level IRQ helper macros for BCMRing-based platforms
- *
- */
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(MM_IO_BASE_INTC0)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #IRQ_INTC0_START
-		cmp	\irqstat, #0
-		bne	1001f
-
-		ldr	\base, =(MM_IO_BASE_INTC1)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #IRQ_INTC1_START
-		cmp	\irqstat, #0
-		bne	1001f
-
-		ldr	\base, =(MM_IO_BASE_SINTC)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
-		cmp	\irqstat, #0
-		beq	1002f
-
-		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/hardware.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/hardware.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/hardware.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/hardware.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,57 +0,0 @@
-/*
- *
- *  This file contains the hardware definitions of the BCMRing.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <cfg_global.h>
-#include <mach/csp/mm_io.h>
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START               PHYS_OFFSET
-
-#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
-#define RAM_BASE                PAGE_OFFSET
-
-/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
-/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
-#if defined(__KERNEL__)
-#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
-#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
-#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
-#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
-#else
-#define HW_DECLARE_SPINLOCK(name)
-#define HW_EXTERN_SPINLOCK(name)
-#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
-#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
-#endif
-
-#ifndef HW_IO_PHYS_TO_VIRT
-#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
-#endif
-#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/irqs.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/irqs.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/irqs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/irqs.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,132 +0,0 @@
-/*
- *  Copyright (C) 2007 Broadcom
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(ARCH_BCMRING_IRQS_H)
-#define ARCH_BCMRING_IRQS_H
-
-/* INTC0 - interrupt controller 0 */
-#define IRQ_INTC0_START     0
-#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
-#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
-#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
-#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
-#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
-#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
-#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
-#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
-#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
-#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
-#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
-#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
-#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
-#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
-#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
-#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
-#define IRQ_VPM            16	/* Voice process module interrupt */
-#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
-#define IRQ_USBH1          18	/* USB1 host interrupt */
-#define IRQ_USBD           19	/* USB device interrupt */
-#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
-#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
-#define IRQ_TIMER0         22	/* Timer0 interrupt */
-#define IRQ_TIMER1         23	/* Timer1 interrupt */
-#define IRQ_TIMER2         24	/* Timer2 interrupt */
-#define IRQ_TIMER3         25	/* Timer3 interrupt */
-#define IRQ_SPIH           26	/* SPI host interrupt */
-#define IRQ_ESW            27	/* Ethernet switch interrupt */
-#define IRQ_APM            28	/* Audio process module interrupt */
-#define IRQ_GE             29	/* Graphic engine interrupt */
-#define IRQ_CLCD           30	/* LCD Controller interrupt */
-#define IRQ_PIF            31	/* Peripheral interface interrupt */
-#define IRQ_INTC0_END      31
-
-/* INTC1 - interrupt controller 1 */
-#define IRQ_INTC1_START    32
-#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
-#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
-#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
-#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
-#define IRQ_I2CH           36	/*  4 I2C host interrupt */
-#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
-#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
-#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
-#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
-#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
-#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
-#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
-#define IRQ_UARTB          44	/* 12 UARTB */
-#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
-#define IRQ_UARTA          46	/* 14 UARTA */
-#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
-#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
-#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
-#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
-#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
-#define IRQ_RNG            52	/* 20 Random number generator interrupt */
-#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
-#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
-#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
-#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
-#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
-#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
-#define IRQ_INTC1_END      58
-
-/* SINTC secure int controller */
-#define IRQ_SINTC_START    59
-#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
-#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
-#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
-#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
-#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
-#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
-#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
-#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
-#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
-#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
-#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
-#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
-#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
-#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
-#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
-#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
-
-#define IRQ_SINTC_END      74
-
-/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
-/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
-/*       to make the mapping easy for humans to decipher. */
-
-#define IRQ_GPIO_0                  100
-
-#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
-
-/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
-/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
-#define NUM_GPIO_IRQS               62
-
-#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
-
-#define IRQ_UNKNOWN                 -1
-
-/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
-#define IRQ_INTC0_VALID_MASK        0xffffffff
-#define IRQ_INTC1_VALID_MASK        0x07ffffff
-#define IRQ_SINTC_VALID_MASK        0x0000ffff
-
-#endif /* ARCH_BCMRING_IRQS_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/memory_settings.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/memory_settings.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/memory_settings.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/memory_settings.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,67 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef MEMORY_SETTINGS_H
-#define MEMORY_SETTINGS_H
-
-/* ---- Include Files ---------------------------------------- */
-/* ---- Constants and Types ---------------------------------- */
-
-/* Memory devices */
-/* NAND Flash timing for 166 MHz setting */
-#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
-#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
-#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
-#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
-#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
-#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
-
-#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
-	| HW_CFG_NAND_tWP  \
-	| HW_CFG_NAND_tWR  \
-	| HW_CFG_NAND_tAS  \
-	| HW_CFG_NAND_tOE  \
-	| HW_CFG_NAND_tRC)
-
-/* NOR Flash timing for 166 MHz setting */
-#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
-#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
-#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
-#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
-#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
-#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
-#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
-
-#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
-	| HW_CFG_NOR_TBTA      \
-	| HW_CFG_NOR_TWP       \
-	| HW_CFG_NOR_TWR       \
-	| HW_CFG_NOR_TAS       \
-	| HW_CFG_NOR_TOE       \
-	| HW_CFG_NOR_TRC_TLC)
-
-#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
-#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
-
-/* SDRAM Settings */
-/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
-/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
-/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
-/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
-#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
-
-/* ---- Variable Externs ------------------------------------- */
-/* ---- Function Prototypes ---------------------------------- */
-
-#endif /* MEMORY_SETTINGS_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/reg_nand.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/reg_nand.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/reg_nand.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/reg_nand.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,66 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  REG_NAND.h
-*
-*  PURPOSE:
-*
-*     This file contains definitions for the nand registers:
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(__ASM_ARCH_REG_NAND_H)
-#define __ASM_ARCH_REG_NAND_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <mach/reg_umi.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-#define HW_NAND_BASE       MM_IO_BASE_NAND	/* NAND Flash */
-
-/* DMA accesses by the bootstrap need hard nonvirtual addresses */
-#define REG_NAND_CMD            __REG16(HW_NAND_BASE + 0)
-#define REG_NAND_ADDR           __REG16(HW_NAND_BASE + 4)
-
-#define REG_NAND_PHYS_DATA16   (HW_NAND_BASE + 8)
-#define REG_NAND_PHYS_DATA8    (HW_NAND_BASE + 8)
-#define REG_NAND_DATA16         __REG16(REG_NAND_PHYS_DATA16)
-#define REG_NAND_DATA8          __REG8(REG_NAND_PHYS_DATA8)
-
-/* use appropriate offset to make sure it start at the 1K boundary */
-#define REG_NAND_PHYS_DATA_DMA   (HW_NAND_BASE + 0x400)
-#define REG_NAND_DATA_DMA         __REG32(REG_NAND_PHYS_DATA_DMA)
-
-/* Linux DMA requires physical address of the data register */
-#define REG_NAND_DATA16_PADDR    HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16)
-#define REG_NAND_DATA8_PADDR     HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8)
-#define REG_NAND_DATA_PADDR      HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA)
-
-#define NAND_BUS_16BIT()        (0)
-#define NAND_BUS_8BIT()         (!NAND_BUS_16BIT())
-
-/* Register offsets */
-#define REG_NAND_CMD_OFFSET     (0)
-#define REG_NAND_ADDR_OFFSET    (4)
-#define REG_NAND_DATA8_OFFSET   (8)
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/reg_umi.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/reg_umi.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/reg_umi.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/reg_umi.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,237 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  REG_UMI.h
-*
-*  PURPOSE:
-*
-*     This file contains definitions for the nand registers:
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(__ASM_ARCH_REG_UMI_H)
-#define __ASM_ARCH_REG_UMI_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <mach/csp/mm_io.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-/* Unified Memory Interface Ctrl Register */
-#define HW_UMI_BASE       MM_IO_BASE_UMI
-
-/* Flash bank 0 timing and control register */
-#define REG_UMI_FLASH0_TCR         __REG32(HW_UMI_BASE  + 0x00)
-/* Flash bank 1 timing and control register */
-#define REG_UMI_FLASH1_TCR         __REG32(HW_UMI_BASE  + 0x04)
-/* Flash bank 2 timing and control register */
-#define REG_UMI_FLASH2_TCR         __REG32(HW_UMI_BASE  + 0x08)
-/* MMD interface and control register */
-#define REG_UMI_MMD_ICR            __REG32(HW_UMI_BASE  + 0x0c)
-/* NAND timing and control register */
-#define REG_UMI_NAND_TCR           __REG32(HW_UMI_BASE  + 0x18)
-/* NAND ready/chip select register */
-#define REG_UMI_NAND_RCSR          __REG32(HW_UMI_BASE  + 0x1c)
-/* NAND ECC control & status register */
-#define REG_UMI_NAND_ECC_CSR       __REG32(HW_UMI_BASE  + 0x20)
-/* NAND ECC data register XXB2B1B0 */
-#define REG_UMI_NAND_ECC_DATA      __REG32(HW_UMI_BASE  + 0x24)
-/* BCH ECC Parameter N */
-#define REG_UMI_BCH_N              __REG32(HW_UMI_BASE  + 0x40)
-/* BCH ECC Parameter T */
-#define REG_UMI_BCH_K              __REG32(HW_UMI_BASE  + 0x44)
-/* BCH ECC Parameter K */
-#define REG_UMI_BCH_T              __REG32(HW_UMI_BASE  + 0x48)
-/* BCH ECC Contro Status */
-#define REG_UMI_BCH_CTRL_STATUS    __REG32(HW_UMI_BASE  + 0x4C)
-/* BCH WR ECC 31:0 */
-#define REG_UMI_BCH_WR_ECC_0       __REG32(HW_UMI_BASE  + 0x50)
-/* BCH WR ECC 63:32 */
-#define REG_UMI_BCH_WR_ECC_1       __REG32(HW_UMI_BASE  + 0x54)
-/* BCH WR ECC 95:64 */
-#define REG_UMI_BCH_WR_ECC_2       __REG32(HW_UMI_BASE  + 0x58)
-/* BCH WR ECC 127:96 */
-#define REG_UMI_BCH_WR_ECC_3       __REG32(HW_UMI_BASE  + 0x5c)
-/* BCH WR ECC 155:128 */
-#define REG_UMI_BCH_WR_ECC_4       __REG32(HW_UMI_BASE  + 0x60)
-/* BCH Read Error Location 1,0 */
-#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE  + 0x64)
-/* BCH Read Error Location 3,2 */
-#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE  + 0x68)
-/* BCH Read Error Location 5,4 */
-#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE  + 0x6c)
-/* BCH Read Error Location 7,6 */
-#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE  + 0x70)
-/* BCH Read Error Location 9,8 */
-#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE  + 0x74)
-/* BCH Read Error Location 11,10 */
-#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE  + 0x78)
-
-/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
-/* Enable wait pin during burst write or read */
-#define REG_UMI_TCR_WAITEN              0x80000000
-/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */
-#define REG_UMI_TCR_LOWFREQ             0x40000000
-/* 1=synch write, 0=async write */
-#define REG_UMI_TCR_MEMTYPE_SYNCWRITE   0x20000000
-/* 1=synch read, 0=async read */
-#define REG_UMI_TCR_MEMTYPE_SYNCREAD    0x10000000
-/* 1=page mode read, 0=normal mode read */
-#define REG_UMI_TCR_MEMTYPE_PAGEREAD    0x08000000
-/* page size/burst size (wrap only) */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK   0x07000000
-/* 4 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_4      0x00000000
-/* 8 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_8      0x01000000
-/* 16 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_16     0x02000000
-/* 32 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_32     0x03000000
-/* 64 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_64     0x04000000
-/* 128 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_128    0x05000000
-/* 256 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_256    0x06000000
-/* 512 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_512    0x07000000
-/* Page read access cycle / Burst write latency (n+2 / n+1) */
-#define REG_UMI_TCR_TPRC_TWLC_MASK      0x00f80000
-/* Bus turnaround cycle (n) */
-#define REG_UMI_TCR_TBTA_MASK           0x00070000
-/* Write pulse width cycle (n+1) */
-#define REG_UMI_TCR_TWP_MASK            0x0000f800
-/* Write recovery cycle (n+1) */
-#define REG_UMI_TCR_TWR_MASK            0x00000600
-/* Write address setup cycle (n+1) */
-#define REG_UMI_TCR_TAS_MASK            0x00000180
-/* Output enable delay cycle (n) */
-#define REG_UMI_TCR_TOE_MASK            0x00000060
-/* Read access cycle / Burst read latency (n+2 / n+1) */
-#define REG_UMI_TCR_TRC_TLC_MASK        0x0000001f
-
-/* REG_UMI_MMD_ICR bits */
-/* Flash write protection pin control */
-#define REG_UMI_MMD_ICR_FLASH_WP            0x8000
-/* Extend hold time for sram0, sram1 csn (39 MHz operation) */
-#define REG_UMI_MMD_ICR_XHCS                0x4000
-/* Enable SDRAM 2 interface control */
-#define REG_UMI_MMD_ICR_SDRAM2EN            0x2000
-/* Enable merge of flash banks 0/1 to 512 MBit bank */
-#define REG_UMI_MMD_ICR_INST512             0x1000
-/* Enable merge of flash banks 1/2 to 512 MBit bank */
-#define REG_UMI_MMD_ICR_DATA512             0x0800
-/* Enable SDRAM interface control */
-#define REG_UMI_MMD_ICR_SDRAMEN             0x0400
-/* Polarity of busy state of Burst Wait Signal */
-#define REG_UMI_MMD_ICR_WAITPOL             0x0200
-/* Enable burst clock stopped when not accessing external burst flash/sram */
-#define REG_UMI_MMD_ICR_BCLKSTOP            0x0100
-/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */
-#define REG_UMI_MMD_ICR_PERI1EN             0x0080
-/* Enable the peri2_csn to replace sdram_csn */
-#define REG_UMI_MMD_ICR_PERI2EN             0x0040
-/* Enable the peri3_csn to replace sdram2_csn */
-#define REG_UMI_MMD_ICR_PERI3EN             0x0020
-/* Enable sram bank1 for H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSB1               0x0010
-/* Enable sram bank0 for H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSB0               0x0008
-/* Polarity for assert3ed state of H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSPOL              0x0004
-/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */
-/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */
-#define REG_UMI_MMD_ICR_MRSMODE             0x0002
-/* MRS state for S/W controlled mode */
-#define REG_UMI_MMD_ICR_MRSSTATE            0x0001
-
-/* REG_UMI_NAND_TCR bits */
-/* Enable software to control CS */
-#define REG_UMI_NAND_TCR_CS_SWCTRL          0x80000000
-/* 16-bit nand wordsize if set */
-#define REG_UMI_NAND_TCR_WORD16             0x40000000
-/* Bus turnaround cycle (n) */
-#define REG_UMI_NAND_TCR_TBTA_MASK          0x00070000
-/* Write pulse width cycle (n+1) */
-#define REG_UMI_NAND_TCR_TWP_MASK           0x0000f800
-/* Write recovery cycle (n+1) */
-#define REG_UMI_NAND_TCR_TWR_MASK           0x00000600
-/* Write address setup cycle (n+1) */
-#define REG_UMI_NAND_TCR_TAS_MASK           0x00000180
-/* Output enable delay cycle (n) */
-#define REG_UMI_NAND_TCR_TOE_MASK           0x00000060
-/* Read access cycle (n+2) */
-#define REG_UMI_NAND_TCR_TRC_TLC_MASK       0x0000001f
-
-/* REG_UMI_NAND_RCSR bits */
-/* Status: Ready=1, Busy=0 */
-#define REG_UMI_NAND_RCSR_RDY               0x02
-/* Keep CS asserted during operation */
-#define REG_UMI_NAND_RCSR_CS_ASSERTED       0x01
-
-/* REG_UMI_NAND_ECC_CSR bits */
-/* Interrupt status - read-only */
-#define REG_UMI_NAND_ECC_CSR_NANDINT        0x80000000
-/* Read: Status of ECC done, Write: clear ECC interrupt */
-#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW     0x00800000
-/* Read: Status of R/B, Write: clear R/B interrupt */
-#define REG_UMI_NAND_ECC_CSR_RBINT_RAW      0x00400000
-/* 1 = Enable ECC Interrupt */
-#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE  0x00008000
-/* 1 = Assert interrupt at rising edge of R/B_ */
-#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE   0x00004000
-/* Calculate ECC by 0=512 bytes, 1=256 bytes */
-#define REG_UMI_NAND_ECC_CSR_256BYTE        0x00000080
-/* Enable ECC in hardware */
-#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE     0x00000001
-
-/* REG_UMI_BCH_CTRL_STATUS bits */
-/* Shift to Indicate Number of correctable errors detected */
-#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20
-/* Indicate Number of correctable errors detected */
-#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000
-/* Indicate Errors detected during read but uncorrectable */
-#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR    0x00080000
-/* Indicate Errors detected during read and are correctable */
-#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR      0x00040000
-/* Flag indicates BCH's ECC status of read process are valid */
-#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID  0x00020000
-/* Flag indicates BCH's ECC status of write process are valid */
-#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID  0x00010000
-/* Pause ECC calculation */
-#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010
-/* Enable Interrupt */
-#define REG_UMI_BCH_CTRL_STATUS_INT_EN        0x00000004
-/* Enable ECC during read */
-#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN     0x00000002
-/* Enable ECC during write */
-#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN     0x00000001
-/* Mask for location */
-#define REG_UMI_BCH_ERR_LOC_MASK              0x00001FFF
-/* location within a byte */
-#define REG_UMI_BCH_ERR_LOC_BYTE              0x00000007
-/* location within a word */
-#define REG_UMI_BCH_ERR_LOC_WORD              0x00000018
-/* location within a page (512 byte) */
-#define REG_UMI_BCH_ERR_LOC_PAGE              0x00001FE0
-#define REG_UMI_BCH_ERR_LOC_ADDR(index)     (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/timer.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/timer.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/timer.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/timer.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,77 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  timer.h
-*
-*  PURPOSE:
-*
-*
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(BCM_LINUX_TIMER_H)
-#define BCM_LINUX_TIMER_H
-
-#if defined(__KERNEL__)
-
-/* ---- Include Files ---------------------------------------------------- */
-/* ---- Constants and Types ---------------------------------------------- */
-
-typedef unsigned int timer_tick_count_t;
-typedef unsigned int timer_tick_rate_t;
-typedef unsigned int timer_msec_t;
-
-/* ---- Variable Externs ------------------------------------------------- */
-/* ---- Function Prototypes ---------------------------------------------- */
-
-/****************************************************************************
-*
-*  timer_get_tick_count
-*
-*
-***************************************************************************/
-timer_tick_count_t timer_get_tick_count(void);
-
-/****************************************************************************
-*
-*  timer_get_tick_rate
-*
-*
-***************************************************************************/
-timer_tick_rate_t timer_get_tick_rate(void);
-
-/****************************************************************************
-*
-*  timer_get_msec
-*
-*
-***************************************************************************/
-timer_msec_t timer_get_msec(void);
-
-/****************************************************************************
-*
-*  timer_ticks_to_msec
-*
-*
-***************************************************************************/
-timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
-
-#endif /* __KERNEL__ */
-#endif /* BCM_LINUX_TIMER_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/timex.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/timex.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/timex.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,25 +0,0 @@
-/*
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Specifies the number of ticks per second
- */
-#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/uncompress.h linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/uncompress.h
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/include/mach/uncompress.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,43 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-#include <mach/csp/mm_addr.h>
-
-#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
-#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	/* Send out UARTA */
-	while (BCMRING_UART_0_FR & (1 << 5))
-		;
-
-	BCMRING_UART_0_DR = c;
-}
-
-
-static inline void flush(void)
-{
-	/* Wait for the tx fifo to be empty */
-	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
-		;
-
-	/* Wait for the final character to be sent on the txd line */
-	while (BCMRING_UART_0_FR & (1 << 3))
-		;
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/irq.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/irq.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/irq.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,126 +0,0 @@
-/*
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-#include <mach/csp/intcHw_reg.h>
-#include <mach/csp/mm_io.h>
-
-static void bcmring_mask_irq0(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC0_START),
-	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq0(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC0_START),
-	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
-}
-
-static void bcmring_mask_irq1(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC1_START),
-	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq1(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC1_START),
-	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
-}
-
-static void bcmring_mask_irq2(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_SINTC_START),
-	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq2(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_SINTC_START),
-	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
-}
-
-static struct irq_chip bcmring_irq0_chip = {
-	.name = "ARM-INTC0",
-	.irq_ack = bcmring_mask_irq0,
-	.irq_mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
-	.irq_unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
-};
-
-static struct irq_chip bcmring_irq1_chip = {
-	.name = "ARM-INTC1",
-	.irq_ack = bcmring_mask_irq1,
-	.irq_mask = bcmring_mask_irq1,
-	.irq_unmask = bcmring_unmask_irq1,
-};
-
-static struct irq_chip bcmring_irq2_chip = {
-	.name = "ARM-SINTC",
-	.irq_ack = bcmring_mask_irq2,
-	.irq_mask = bcmring_mask_irq2,
-	.irq_unmask = bcmring_unmask_irq2,
-};
-
-static void vic_init(void __iomem *base, struct irq_chip *chip,
-		     unsigned int irq_start, unsigned int vic_sources)
-{
-	unsigned int i;
-	for (i = 0; i < 32; i++) {
-		unsigned int irq = irq_start + i;
-		irq_set_chip(irq, chip);
-		irq_set_chip_data(irq, base);
-
-		if (vic_sources & (1 << i)) {
-			irq_set_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-	writel(0, base + INTCHW_INTSELECT);
-	writel(0, base + INTCHW_INTENABLE);
-	writel(~0, base + INTCHW_INTENCLEAR);
-	writel(0, base + INTCHW_IRQSTATUS);
-	writel(~0, base + INTCHW_SOFTINTCLEAR);
-}
-
-void __init bcmring_init_irq(void)
-{
-	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
-		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
-	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
-		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
-	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
-		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
-
-	/* special cases */
-	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
-		irq_set_handler(IRQ_GPIO0, handle_simple_irq);
-	}
-	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
-		irq_set_handler(IRQ_GPIO1, handle_simple_irq);
-	}
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/Kconfig linux-libre-3.7-gnu/arch/arm/mach-bcmring/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/Kconfig	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-choice
-	prompt "Processor selection in BCMRING family of devices"
-	depends on ARCH_BCMRING
-	default ARCH_BCM11107
-
-config ARCH_FPGA11107
-	bool "FPGA11107"
-
-config ARCH_BCM11107
-	bool "BCM11107"
-endchoice
-
-menu "BCMRING Options"
-	depends on ARCH_BCMRING
-
-config BCM_ZRELADDR
-	hex "Compressed ZREL ADDR"
-
-endmenu
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/Makefile linux-libre-3.7-gnu/arch/arm/mach-bcmring/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/Makefile	1969-12-31 19:00:00.000000000 -0500
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
-obj-y += csp/
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-bcmring/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
@@ -1,6 +0,0 @@
-# Address where decompressor will be written and eventually executed.
-#
-# default to SDRAM
-zreladdr-y      += $(CONFIG_BCM_ZRELADDR)
-params_phys-y   := 0x00000800
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/mm.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/mm.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/mm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/mm.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,60 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-
-#define IO_DESC(va, sz) { .virtual = va, \
-	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
-	.length = sz, \
-	.type = MT_DEVICE }
-
-#define MEM_DESC(va, sz) { .virtual = va, \
-	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
-	.length = sz, \
-	.type = MT_MEMORY }
-
-static struct map_desc bcmring_io_desc[] __initdata = {
-	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
-	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
-
-	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
-	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
-
-	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
-	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
-		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
-};
-
-void __init bcmring_map_io(void)
-{
-
-	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
-	/* Maximum DMA memory allowed is 14M */
-	init_consistent_dma_size(14 << 20);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-bcmring/timer.c linux-libre-3.7-gnu/arch/arm/mach-bcmring/timer.c
--- linux-libre-3.6-gnu/arch/arm/mach-bcmring/timer.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-bcmring/timer.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,61 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <csp/tmrHw.h>
-
-#include <mach/timer.h>
-/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
-/* The real time clock should probably be the real linux clocksource. */
-/* In the meantime, this file should agree with core.c as to the */
-/* profiling timer. If the clocksource is moved to rtc later, then */
-/* we can init the profiling timer here instead. */
-
-/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
-/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
-/* affect synchronization with scheduling and APM timing. */
-
-#define PROF_TIMER 1
-
-timer_tick_rate_t timer_get_tick_rate(void)
-{
-	return tmrHw_getCountRate(PROF_TIMER);
-}
-
-timer_tick_count_t timer_get_tick_count(void)
-{
-	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
-}
-
-timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
-{
-	static int tickRateMsec;
-
-	if (tickRateMsec == 0) {
-		tickRateMsec = timer_get_tick_rate() / 1000;
-	}
-
-	return ticks / tickRateMsec;
-}
-
-timer_msec_t timer_get_msec(void)
-{
-	return timer_ticks_to_msec(timer_get_tick_count());
-}
-
-EXPORT_SYMBOL(timer_get_tick_count);
-EXPORT_SYMBOL(timer_ticks_to_msec);
-EXPORT_SYMBOL(timer_get_tick_rate);
-EXPORT_SYMBOL(timer_get_msec);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/autcpu12.c linux-libre-3.7-gnu/arch/arm/mach-clps711x/autcpu12.c
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/autcpu12.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/autcpu12.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,6 +23,8 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/sizes.h>
@@ -62,9 +64,26 @@
         iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc));
 }
 
+static struct resource autcpu12_nvram_resource[] __initdata = {
+	DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"),
+};
+
+static struct platform_device autcpu12_nvram_pdev __initdata = {
+	.name		= "autcpu12_nvram",
+	.id		= -1,
+	.resource	= autcpu12_nvram_resource,
+	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
+};
+
+static void __init autcpu12_init(void)
+{
+	platform_device_register(&autcpu12_nvram_pdev);
+}
+
 MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
 	.atag_offset	= 0x20000,
+	.init_machine	= autcpu12_init,
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/ceiva.c linux-libre-3.7-gnu/arch/arm/mach-clps711x/ceiva.c
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/ceiva.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/ceiva.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/arch-ceiva.c
- *
- *  Copyright (C) 2002, Rob Scott <rscott@mtrob.fdns.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/kernel.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct map_desc ceiva_io_desc[] __initdata = {
- 	/* SED1355 controlled video RAM & registers */
- 	{
-		.virtual	= CEIVA_VIRT_SED1355,
-		.pfn		= __phys_to_pfn(CEIVA_PHYS_SED1355),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE
-	}
-};
-
-
-static void __init ceiva_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc));
-}
-
-
-MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
-	/* Maintainer: Rob Scott */
-	.atag_offset	= 0x100,
-	.map_io		= ceiva_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/common.c linux-libre-3.7-gnu/arch/arm/mach-clps711x/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,24 +19,25 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/io.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/sched.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
+#include <mach/hardware.h>
+
+static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
+		  *clk_tint, *clk_spi;
+static unsigned long latch;
+
 /*
  * This maps the generic CLPS711x registers
  */
@@ -166,8 +167,8 @@
 static unsigned long clps711x_gettimeoffset(void)
 {
 	unsigned long hwticks;
-	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
-	return (hwticks * (tick_nsec / 1000)) / LATCH;
+	hwticks = latch - (clps_readl(TC2D) & 0xffff);
+	return (hwticks * (tick_nsec / 1000)) / latch;
 }
 
 /*
@@ -185,15 +186,71 @@
 	.handler	= p720t_timer_interrupt,
 };
 
+static void add_fixed_clk(struct clk *clk, const char *name, int rate)
+{
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	clk_register_clkdev(clk, name, NULL);
+}
+
 static void __init clps711x_timer_init(void)
 {
-	unsigned int syscon;
+	int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
+	u32 tmp;
 
-	syscon = clps_readl(SYSCON1);
-	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
-	clps_writel(syscon, SYSCON1);
+	osc = 3686400;
+	ext = 13000000;
 
-	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+	tmp = clps_readl(PLLR) >> 24;
+	if (tmp)
+		pll = (osc * tmp) / 2;
+	else
+		pll = 73728000; /* Default value */
+
+	tmp = clps_readl(SYSFLG2);
+	if (tmp & SYSFLG2_CKMODE) {
+		cpu = ext;
+		bus = cpu;
+		spi = 135400;
+	} else {
+		cpu = pll;
+		if (cpu >= 36864000)
+			bus = cpu / 2;
+		else
+			bus = 36864000 / 2;
+		spi = cpu / 576;
+	}
+
+	uart = bus / 10;
+
+	if (tmp & SYSFLG2_CKMODE) {
+		tmp = clps_readl(SYSCON2);
+		if (tmp & SYSCON2_OSTB)
+			timh = ext / 26;
+		else
+			timh = 541440;
+	} else
+		timh = cpu / 144;
+
+	timl = timh / 256;
+
+	/* All clocks are fixed */
+	add_fixed_clk(clk_pll, "pll", pll);
+	add_fixed_clk(clk_bus, "bus", bus);
+	add_fixed_clk(clk_uart, "uart", uart);
+	add_fixed_clk(clk_timerl, "timer_lf", timl);
+	add_fixed_clk(clk_timerh, "timer_hf", timh);
+	add_fixed_clk(clk_tint, "tint", 64);
+	add_fixed_clk(clk_spi, "spi", spi);
+
+	pr_info("CPU frequency set at %i Hz.\n", cpu);
+
+	latch = (timh + HZ / 2) / HZ;
+
+	tmp = clps_readl(SYSCON1);
+	tmp |= SYSCON1_TC2S | SYSCON1_TC2M;
+	clps_writel(tmp, SYSCON1);
+
+	clps_writel(latch - 1, TC2D);
 
 	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/clps711x.h linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/clps711x.h
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/clps711x.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/clps711x.h	2012-12-10 22:30:57.000000000 -0500
@@ -31,8 +31,8 @@
 #define PBDDR		(0x0041)
 #define PCDDR		(0x0042)
 #define PDDDR		(0x0043)
-#define PEDR		(0x0080)
-#define PEDDR		(0x00c0)
+#define PEDR		(0x0083)
+#define PEDDR		(0x00c3)
 #define SYSCON1		(0x0100)
 #define SYSFLG1		(0x0140)
 #define MEMCFG1		(0x0180)
@@ -77,7 +77,7 @@
 #define KBDEOI		(0x1700)
 
 #define DAIR		(0x2000)
-#define DAIR0		(0x2040)
+#define DAIDR0		(0x2040)
 #define DAIDR1		(0x2080)
 #define DAIDR2		(0x20c0)
 #define DAISR		(0x2100)
@@ -191,8 +191,7 @@
 #define UBRLCR_WRDLEN8		(3 << 17)
 #define UBRLCR_WRDLEN_MASK	(3 << 17)
 
-#define SYNCIO_FRMLEN(x)	(((x) & 0x3f) << 7)
-#define SYNCIO_CFGLEN(x)	((x) & 0x7f)
+#define SYNCIO_FRMLEN(x)	(((x) & 0x1f) << 8)
 #define SYNCIO_SMCKEN		(1 << 13)
 #define SYNCIO_TXFRMEN		(1 << 14)
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S	2012-12-10 22:30:57.000000000 -0500
@@ -28,17 +28,11 @@
 		.endm
 
 		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
-		tst	\rx, #0x1000		@ UART2 does not have CTS here
-		bne	1002f
 1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 8		@ CTS
+		tst	\rd, #1 << 11		@ UBUSYx
 		bne	1001b
-1002:
 		.endm
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/hardware.h linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/hardware.h
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/hardware.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/hardware.h	2012-12-10 22:30:57.000000000 -0500
@@ -116,7 +116,6 @@
 
 #endif /* CONFIG_ARCH_EDB7211 */
 
-
 /*
  * Relevant bits in port D, which controls power to the various parts of
  * the LCD on the EDB7211.
@@ -125,51 +124,4 @@
 #define EDB_PD2_LCDEN		(1<<2)
 #define EDB_PD3_LCDBL		(1<<3)
 
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/timex.h linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/timex.h
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/include/mach/timex.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/include/mach/timex.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,23 +1,2 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/timex.h
- *
- *  Prospector 720T architecture timex specifications
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
+/* Bogus value */
 #define CLOCK_TICK_RATE 512000
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/Kconfig linux-libre-3.7-gnu/arch/arm/mach-clps711x/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -16,12 +16,6 @@
 	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
 	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
 
-config ARCH_CEIVA
-	bool "CEIVA"
-	help
-	  Say Y here if you intend to run this kernel on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-
 config ARCH_CLEP7312
 	bool "CLEP7312"
 	help
@@ -29,9 +23,9 @@
 
 config ARCH_EDB7211
 	bool "EDB7211"
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
+	select ARCH_SPARSEMEM_ENABLE
+	select ISA
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/Makefile linux-libre-3.7-gnu/arch/arm/mach-clps711x/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -9,12 +9,9 @@
 obj-n			:=
 obj-			:=
 
-obj-$(CONFIG_ARCH_CEIVA) += ceiva.o
 obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
 obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
 obj-$(CONFIG_ARCH_P720T)    += p720t.o
-leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
-obj-$(CONFIG_LEDS)          += $(leds-y)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/p720t.c linux-libre-3.7-gnu/arch/arm/mach-clps711x/p720t.c
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/p720t.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/p720t.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,6 +23,8 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/pgtable.h>
@@ -34,6 +36,8 @@
 #include <asm/mach/map.h>
 #include <mach/syspld.h>
 
+#include <asm/hardware/clps7111.h>
+
 #include "common.h"
 
 /*
@@ -107,6 +111,64 @@
 	}
 }
 
+/*
+ * LED controled by CPLD
+ */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void p720t_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	u8 reg = clps_readb(PDDR);
+
+	if (b != LED_OFF)
+		reg |= 0x1;
+	else
+		reg &= ~0x1;
+
+	clps_writeb(reg, PDDR);
+}
+
+static enum led_brightness p720t_led_get(struct led_classdev *cdev)
+{
+	u8 reg = clps_readb(PDDR);
+
+	return (reg & 0x1) ? LED_FULL : LED_OFF;
+}
+
+static int __init p720t_leds_init(void)
+{
+
+	struct led_classdev *cdev;
+	int ret;
+
+	if (!machine_is_p720t())
+		return -ENODEV;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->name = "p720t:0";
+	cdev->brightness_set = p720t_led_set;
+	cdev->brightness_get = p720t_led_get;
+	cdev->default_trigger = "heartbeat";
+
+	ret = led_classdev_register(NULL, cdev);
+	if (ret	< 0) {
+		kfree(cdev);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(p720t_leds_init);
+#endif
+
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-clps711x/p720t-leds.c linux-libre-3.7-gnu/arch/arm/mach-clps711x/p720t-leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-clps711x/p720t-leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-clps711x/p720t-leds.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,63 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/leds.c
- *
- *  Integrator LED control routines
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 pddr;
-
-	local_irq_save(flags);
-	switch(ledevt) {
-	case led_idle_start:
-		break;
-
-	case led_idle_end:
-		break;
-
-	case led_timer:
-		pddr = clps_readb(PDDR);
-		clps_writeb(pddr ^ 1, PDDR);
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_p720t())
-		leds_event = p720t_leds_event;
-
-	return 0;
-}
-
-arch_initcall(leds_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/aemif.c linux-libre-3.7-gnu/arch/arm/mach-davinci/aemif.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/aemif.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/aemif.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/time.h>
 
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 /* Timing value configuration */
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/asp.h linux-libre-3.7-gnu/arch/arm/mach-davinci/asp.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/asp.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/asp.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,49 @@
+/*
+ * TI DaVinci Audio definitions
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+/* Bases of dm644x and dm355 register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* Bases of dm365 register banks */
+#define DAVINCI_DM365_ASP0_BASE	0x01D02000
+
+/* Bases of dm646x register banks */
+#define DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
+#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
+
+/* Bases of da850/da830 McASP0  register banks */
+#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
+
+/* Bases of da830 McASP1 register banks */
+#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
+
+/* EDMA channels of dm644x and dm355 */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* EDMA channels of dm646x */
+#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
+#define DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
+#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
+
+/* EDMA channels of da850/da830 McASP0 */
+#define DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
+#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
+
+/* EDMA channels of da830 McASP1 */
+#define DAVINCI_DA830_DMA_MCASP1_AREVT	2
+#define DAVINCI_DA830_DMA_MCASP1_AXEVT	3
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-da830-evm.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-da830-evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-da830-evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-da830-evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,11 +28,11 @@
 
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-da850-evm.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-da850-evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-da850-evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-da850-evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -40,10 +40,13 @@
 
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
+
+#include <media/tvp514x.h>
+#include <media/adv7343.h>
 
 #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
@@ -452,6 +455,15 @@
 	}
 }
 
+#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
+static inline void da850_evm_setup_video_port(int video_sel)
+{
+	gpio_set_value_cansleep(video_sel, 0);
+}
+#else
+static inline void da850_evm_setup_video_port(int video_sel) { }
+#endif
+
 static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 						unsigned ngpio, void *c)
 {
@@ -497,6 +509,8 @@
 
 	da850_evm_setup_emac_rmii(sel_a);
 
+	da850_evm_setup_video_port(sel_c);
+
 	return 0;
 
 exp_setup_keys_fail:
@@ -1149,6 +1163,169 @@
 static __init int da850_evm_init_cpufreq(void) { return 0; }
 #endif
 
+#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
+
+#define TVP5147_CH0		"tvp514x-0"
+#define TVP5147_CH1		"tvp514x-1"
+
+/* VPIF capture configuration */
+static struct tvp514x_platform_data tvp5146_pdata = {
+		.clk_polarity = 0,
+		.hs_polarity  = 1,
+		.vs_polarity  = 1,
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static const struct vpif_input da850_ch0_inputs[] = {
+	{
+		.input = {
+			.index = 0,
+			.name  = "Composite",
+			.type  = V4L2_INPUT_TYPE_CAMERA,
+			.capabilities = V4L2_IN_CAP_STD,
+			.std   = TVP514X_STD_ALL,
+		},
+		.input_route = INPUT_CVBS_VI2B,
+		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.subdev_name = TVP5147_CH0,
+	},
+};
+
+static const struct vpif_input da850_ch1_inputs[] = {
+	{
+		.input = {
+			.index = 0,
+			.name  = "S-Video",
+			.type  = V4L2_INPUT_TYPE_CAMERA,
+			.capabilities = V4L2_IN_CAP_STD,
+			.std   = TVP514X_STD_ALL,
+		},
+		.input_route = INPUT_SVIDEO_VI2C_VI1C,
+		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.subdev_name = TVP5147_CH1,
+	},
+};
+
+static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
+	{
+		.name = TVP5147_CH0,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+	{
+		.name = TVP5147_CH1,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5c),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpif_capture_config da850_vpif_capture_config = {
+	.subdev_info = da850_vpif_capture_sdev_info,
+	.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
+	.chan_config[0] = {
+		.inputs = da850_ch0_inputs,
+		.input_count = ARRAY_SIZE(da850_ch0_inputs),
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol  = 1,
+			.vd_pol  = 1,
+			.fid_pol = 0,
+		},
+	},
+	.chan_config[1] = {
+		.inputs = da850_ch1_inputs,
+		.input_count = ARRAY_SIZE(da850_ch1_inputs),
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol  = 1,
+			.vd_pol  = 1,
+			.fid_pol = 0,
+		},
+	},
+	.card_name = "DA850/OMAP-L138 Video Capture",
+};
+
+/* VPIF display configuration */
+static struct vpif_subdev_info da850_vpif_subdev[] = {
+	{
+		.name = "adv7343",
+		.board_info = {
+			I2C_BOARD_INFO("adv7343", 0x2a),
+		},
+	},
+};
+
+static const struct vpif_output da850_ch0_outputs[] = {
+	{
+		.output = {
+			.index = 0,
+			.name = "Composite",
+			.type = V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities = V4L2_OUT_CAP_STD,
+			.std = V4L2_STD_ALL,
+		},
+		.subdev_name = "adv7343",
+		.output_route = ADV7343_COMPOSITE_ID,
+	},
+	{
+		.output = {
+			.index = 1,
+			.name = "S-Video",
+			.type = V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities = V4L2_OUT_CAP_STD,
+			.std = V4L2_STD_ALL,
+		},
+		.subdev_name = "adv7343",
+		.output_route = ADV7343_SVIDEO_ID,
+	},
+};
+
+static struct vpif_display_config da850_vpif_display_config = {
+	.subdevinfo   = da850_vpif_subdev,
+	.subdev_count = ARRAY_SIZE(da850_vpif_subdev),
+	.chan_config[0] = {
+		.outputs = da850_ch0_outputs,
+		.output_count = ARRAY_SIZE(da850_ch0_outputs),
+	},
+	.card_name    = "DA850/OMAP-L138 Video Display",
+};
+
+static __init void da850_vpif_init(void)
+{
+	int ret;
+
+	ret = da850_register_vpif();
+	if (ret)
+		pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
+
+	ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
+			ret);
+
+	ret = da850_register_vpif_capture(&da850_vpif_capture_config);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
+
+	ret = davinci_cfg_reg_list(da850_vpif_display_pins);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
+			ret);
+
+	ret = da850_register_vpif_display(&da850_vpif_display_config);
+	if (ret)
+		pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
+}
+
+#else
+static __init void da850_vpif_init(void) {}
+#endif
+
 #ifdef CONFIG_DA850_WL12XX
 
 static void wl12xx_set_power(int index, bool power_on)
@@ -1375,6 +1552,8 @@
 		pr_warning("da850_evm_init: suspend registration failed: %d\n",
 				ret);
 
+	da850_vpif_init();
+
 	ret = da8xx_register_spi(1, da850evm_spi_info,
 				 ARRAY_SIZE(da850evm_spi_info));
 	if (ret)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm355-evm.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm355-evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm355-evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm355-evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,11 +26,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm355-leopard.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm355-leopard.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm355-leopard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm355-leopard.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,11 +23,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm365-evm.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm365-evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm365-evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm365-evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -33,11 +33,11 @@
 
 #include <mach/mux.h>
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
 
 #include <media/tvp514x.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm644x-evm.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm644x-evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm644x-evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm644x-evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,6 +23,7 @@
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
+#include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 
 #include <media/tvp514x.h>
@@ -31,13 +32,13 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 
@@ -620,7 +621,7 @@
 	{
 		.name		= "ntsc",
 		.timings_type	= VPBE_ENC_STD,
-		.timings	= {V4L2_STD_525_60},
+		.std_id		= V4L2_STD_525_60,
 		.interlaced	= 1,
 		.xres		= 720,
 		.yres		= 480,
@@ -632,7 +633,7 @@
 	{
 		.name		= "pal",
 		.timings_type	= VPBE_ENC_STD,
-		.timings	= {V4L2_STD_625_50},
+		.std_id		= V4L2_STD_625_50,
 		.interlaced	= 1,
 		.xres		= 720,
 		.yres		= 576,
@@ -647,8 +648,8 @@
 static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
 	{
 		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_PRESET,
-		.timings	= {V4L2_DV_480P59_94},
+		.timings_type	= VPBE_ENC_CUSTOM_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
 		.interlaced	= 0,
 		.xres		= 720,
 		.yres		= 480,
@@ -659,8 +660,8 @@
 	},
 	{
 		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_PRESET,
-		.timings	= {V4L2_DV_576P50},
+		.timings_type	= VPBE_ENC_CUSTOM_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
 		.interlaced	= 0,
 		.xres		= 720,
 		.yres		= 576,
@@ -698,7 +699,7 @@
 			.index		= 1,
 			.name		= "Component",
 			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_PRESETS,
+			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
 		},
 		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
 		.default_mode	= "480p59_94",
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm646x-evm.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm646x-evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-dm646x-evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-dm646x-evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,6 +26,7 @@
 #include <linux/i2c/pcf857x.h>
 
 #include <media/tvp514x.h>
+#include <media/adv7343.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -38,11 +39,11 @@
 
 #include <mach/common.h>
 #include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -496,18 +497,49 @@
 	},
 };
 
-static const char *output[] = {
-	"Composite",
-	"Component",
-	"S-Video",
+static const struct vpif_output dm6467_ch0_outputs[] = {
+	{
+		.output = {
+			.index = 0,
+			.name = "Composite",
+			.type = V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities = V4L2_OUT_CAP_STD,
+			.std = V4L2_STD_ALL,
+		},
+		.subdev_name = "adv7343",
+		.output_route = ADV7343_COMPOSITE_ID,
+	},
+	{
+		.output = {
+			.index = 1,
+			.name = "Component",
+			.type = V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS,
+		},
+		.subdev_name = "adv7343",
+		.output_route = ADV7343_COMPONENT_ID,
+	},
+	{
+		.output = {
+			.index = 2,
+			.name = "S-Video",
+			.type = V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities = V4L2_OUT_CAP_STD,
+			.std = V4L2_STD_ALL,
+		},
+		.subdev_name = "adv7343",
+		.output_route = ADV7343_SVIDEO_ID,
+	},
 };
 
 static struct vpif_display_config dm646x_vpif_display_config = {
 	.set_clock	= set_vpif_clock,
 	.subdevinfo	= dm646x_vpif_subdev,
 	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
-	.output		= output,
-	.output_count	= ARRAY_SIZE(output),
+	.chan_config[0] = {
+		.outputs = dm6467_ch0_outputs,
+		.output_count = ARRAY_SIZE(dm6467_ch0_outputs),
+	},
 	.card_name	= "DM646x EVM",
 };
 
@@ -601,15 +633,6 @@
 			I2C_BOARD_INFO("tvp5146", 0x5d),
 			.platform_data = &tvp5146_pdata,
 		},
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.can_route = 1,
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
 	},
 	{
 		.name	= TVP5147_CH1,
@@ -617,15 +640,6 @@
 			I2C_BOARD_INFO("tvp5146", 0x5c),
 			.platform_data = &tvp5146_pdata,
 		},
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.can_route = 1,
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
 	},
 };
 
@@ -635,9 +649,12 @@
 			.index = 0,
 			.name = "Composite",
 			.type = V4L2_INPUT_TYPE_CAMERA,
+			.capabilities = V4L2_IN_CAP_STD,
 			.std = TVP514X_STD_ALL,
 		},
 		.subdev_name = TVP5147_CH0,
+		.input_route = INPUT_CVBS_VI2B,
+		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 	},
 };
 
@@ -647,9 +664,12 @@
 			.index = 0,
 			.name = "S-Video",
 			.type = V4L2_INPUT_TYPE_CAMERA,
+			.capabilities = V4L2_IN_CAP_STD,
 			.std = TVP514X_STD_ALL,
 		},
 		.subdev_name = TVP5147_CH1,
+		.input_route = INPUT_SVIDEO_VI2C_VI1C,
+		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 	},
 };
 
@@ -661,10 +681,22 @@
 	.chan_config[0] = {
 		.inputs = dm6467_ch0_inputs,
 		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
 	},
 	.chan_config[1] = {
 		.inputs = dm6467_ch1_inputs,
 		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
 	},
 };
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-mityomapl138.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-mityomapl138.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-mityomapl138.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-mityomapl138.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,9 +26,9 @@
 #include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define MITYOMAPL138_PHY_ID		""
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-neuros-osd2.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-neuros-osd2.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-neuros-osd2.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-neuros-osd2.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,12 +31,12 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-sffsdr.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-sffsdr.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-sffsdr.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-sffsdr.c	2012-12-10 22:30:57.000000000 -0500
@@ -36,10 +36,10 @@
 #include <asm/mach/flash.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/board-tnetv107x-evm.c linux-libre-3.7-gnu/arch/arm/mach-davinci/board-tnetv107x-evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/board-tnetv107x-evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/board-tnetv107x-evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -88,7 +88,7 @@
 	.version	= MMC_CTLR_VERSION_1,
 };
 
-static const short sdio1_pins[] __initdata = {
+static const short sdio1_pins[] __initconst = {
 	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
 	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
 	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
@@ -96,12 +96,12 @@
 	-1
 };
 
-static const short uart1_pins[] __initdata = {
+static const short uart1_pins[] __initconst = {
 	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
 	-1
 };
 
-static const short ssp_pins[] __initdata = {
+static const short ssp_pins[] __initconst = {
 	TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
 	TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
 	TNETV107X_SSP1_3, -1
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/da830.c linux-libre-3.7-gnu/arch/arm/mach-davinci/da830.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/da830.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/da830.c	2012-12-10 22:30:57.000000000 -0500
@@ -838,7 +838,7 @@
 #endif
 };
 
-const short da830_emif25_pins[] __initdata = {
+const short da830_emif25_pins[] __initconst = {
 	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
 	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
 	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
@@ -853,19 +853,19 @@
 	-1
 };
 
-const short da830_spi0_pins[] __initdata = {
+const short da830_spi0_pins[] __initconst = {
 	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
 	DA830_NSPI0_SCS_0,
 	-1
 };
 
-const short da830_spi1_pins[] __initdata = {
+const short da830_spi1_pins[] __initconst = {
 	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
 	DA830_NSPI1_SCS_0,
 	-1
 };
 
-const short da830_mmc_sd_pins[] __initdata = {
+const short da830_mmc_sd_pins[] __initconst = {
 	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
 	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
 	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
@@ -873,32 +873,32 @@
 	-1
 };
 
-const short da830_uart0_pins[] __initdata = {
+const short da830_uart0_pins[] __initconst = {
 	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
 	-1
 };
 
-const short da830_uart1_pins[] __initdata = {
+const short da830_uart1_pins[] __initconst = {
 	DA830_UART1_RXD, DA830_UART1_TXD,
 	-1
 };
 
-const short da830_uart2_pins[] __initdata = {
+const short da830_uart2_pins[] __initconst = {
 	DA830_UART2_RXD, DA830_UART2_TXD,
 	-1
 };
 
-const short da830_usb20_pins[] __initdata = {
+const short da830_usb20_pins[] __initconst = {
 	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
 	-1
 };
 
-const short da830_usb11_pins[] __initdata = {
+const short da830_usb11_pins[] __initconst = {
 	DA830_USB_REFCLKIN,
 	-1
 };
 
-const short da830_uhpi_pins[] __initdata = {
+const short da830_uhpi_pins[] __initconst = {
 	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
 	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
 	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
@@ -909,14 +909,14 @@
 	-1
 };
 
-const short da830_cpgmac_pins[] __initdata = {
+const short da830_cpgmac_pins[] __initconst = {
 	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
 	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
 	DA830_MDIO_D,
 	-1
 };
 
-const short da830_emif3c_pins[] __initdata = {
+const short da830_emif3c_pins[] __initconst = {
 	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
 	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
 	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
@@ -935,7 +935,7 @@
 	-1
 };
 
-const short da830_mcasp0_pins[] __initdata = {
+const short da830_mcasp0_pins[] __initconst = {
 	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
 	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
 	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
@@ -945,7 +945,7 @@
 	-1
 };
 
-const short da830_mcasp1_pins[] __initdata = {
+const short da830_mcasp1_pins[] __initconst = {
 	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
 	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
 	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
@@ -954,24 +954,24 @@
 	-1
 };
 
-const short da830_mcasp2_pins[] __initdata = {
+const short da830_mcasp2_pins[] __initconst = {
 	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
 	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
 	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
 	-1
 };
 
-const short da830_i2c0_pins[] __initdata = {
+const short da830_i2c0_pins[] __initconst = {
 	DA830_I2C0_SDA, DA830_I2C0_SCL,
 	-1
 };
 
-const short da830_i2c1_pins[] __initdata = {
+const short da830_i2c1_pins[] __initconst = {
 	DA830_I2C1_SCL, DA830_I2C1_SDA,
 	-1
 };
 
-const short da830_lcdcntl_pins[] __initdata = {
+const short da830_lcdcntl_pins[] __initconst = {
 	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
 	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
 	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
@@ -981,34 +981,34 @@
 	-1
 };
 
-const short da830_pwm_pins[] __initdata = {
+const short da830_pwm_pins[] __initconst = {
 	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
 	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
 	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
 	-1
 };
 
-const short da830_ecap0_pins[] __initdata = {
+const short da830_ecap0_pins[] __initconst = {
 	DA830_ECAP0_APWM0,
 	-1
 };
 
-const short da830_ecap1_pins[] __initdata = {
+const short da830_ecap1_pins[] __initconst = {
 	DA830_ECAP1_APWM1,
 	-1
 };
 
-const short da830_ecap2_pins[] __initdata = {
+const short da830_ecap2_pins[] __initconst = {
 	DA830_ECAP2_APWM2,
 	-1
 };
 
-const short da830_eqep0_pins[] __initdata = {
+const short da830_eqep0_pins[] __initconst = {
 	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
 	-1
 };
 
-const short da830_eqep1_pins[] __initdata = {
+const short da830_eqep1_pins[] __initconst = {
 	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
 	-1
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/da850.c linux-libre-3.7-gnu/arch/arm/mach-davinci/da850.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/da850.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/da850.c	2012-12-10 22:30:57.000000000 -0500
@@ -347,6 +347,13 @@
 	.flags		= DA850_CLK_ASYNC3,
 };
 
+static struct clk vpif_clk = {
+	.name		= "vpif",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_VPIF,
+	.gpsc		= 1,
+};
+
 static struct clk sata_clk = {
 	.name		= "sata",
 	.parent		= &pll0_sysclk2,
@@ -397,6 +404,7 @@
 	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
+	CLK("vpif",		NULL,		&vpif_clk),
 	CLK("ahci",		NULL,		&sata_clk),
 	CLK(NULL,		NULL,		NULL),
 };
@@ -573,20 +581,60 @@
 	MUX_CFG(DA850, GPIO6_10,	13,	20,	15,	8,	false)
 	MUX_CFG(DA850, GPIO6_13,	13,	8,	15,	8,	false)
 	MUX_CFG(DA850, RTC_ALARM,	0,	28,	15,	2,	false)
+	/* VPIF Capture */
+	MUX_CFG(DA850, VPIF_DIN0,	15,	4,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN1,	15,	0,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN2,	14,	28,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN3,	14,	24,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN4,	14,	20,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN5,	14,	16,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN6,	14,	12,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN7,	14,	8,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN8,	16,	4,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN9,	16,	0,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN10,	15,	28,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN11,	15,	24,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN12,	15,	20,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN13,	15,	16,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN14,	15,	12,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DIN15,	15,	8,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_CLKIN0,	14,	0,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_CLKIN1,	14,	4,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_CLKIN2,	19,	8,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_CLKIN3,	19,	16,	15,	1,	false)
+	/* VPIF Display */
+	MUX_CFG(DA850, VPIF_DOUT0,	17,	4,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT1,	17,	0,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT2,	16,	28,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT3,	16,	24,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT4,	16,	20,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT5,	16,	16,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT6,	16,	12,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT7,	16,	8,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT8,	18,	4,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT9,	18,	0,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT10,	17,	28,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT11,	17,	24,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT12,	17,	20,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT13,	17,	16,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT14,	17,	12,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_DOUT15,	17,	8,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_CLKO2,	19,	12,	15,	1,	false)
+	MUX_CFG(DA850, VPIF_CLKO3,	19,	20,	15,	1,	false)
 #endif
 };
 
-const short da850_i2c0_pins[] __initdata = {
+const short da850_i2c0_pins[] __initconst = {
 	DA850_I2C0_SDA, DA850_I2C0_SCL,
 	-1
 };
 
-const short da850_i2c1_pins[] __initdata = {
+const short da850_i2c1_pins[] __initconst = {
 	DA850_I2C1_SCL, DA850_I2C1_SDA,
 	-1
 };
 
-const short da850_lcdcntl_pins[] __initdata = {
+const short da850_lcdcntl_pins[] __initconst = {
 	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
 	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
 	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
@@ -595,6 +643,26 @@
 	-1
 };
 
+const short da850_vpif_capture_pins[] __initdata = {
+	DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3,
+	DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7,
+	DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11,
+	DA850_VPIF_DIN12, DA850_VPIF_DIN13, DA850_VPIF_DIN14, DA850_VPIF_DIN15,
+	DA850_VPIF_CLKIN0, DA850_VPIF_CLKIN1, DA850_VPIF_CLKIN2,
+	DA850_VPIF_CLKIN3,
+	-1
+};
+
+const short da850_vpif_display_pins[] __initdata = {
+	DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3,
+	DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7,
+	DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10,
+	DA850_VPIF_DOUT11, DA850_VPIF_DOUT12, DA850_VPIF_DOUT13,
+	DA850_VPIF_DOUT14, DA850_VPIF_DOUT15, DA850_VPIF_CLKO2,
+	DA850_VPIF_CLKO3,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
@@ -939,7 +1007,7 @@
 
 unsigned int da850_max_speed = 300000;
 
-int __init da850_register_cpufreq(char *async_clk)
+int da850_register_cpufreq(char *async_clk)
 {
 	int i;
 
@@ -1064,6 +1132,90 @@
 	return ret;
 }
 
+/* VPIF resource, platform data */
+static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource da850_vpif_resource[] = {
+	{
+		.start = DA8XX_VPIF_BASE,
+		.end   = DA8XX_VPIF_BASE + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device da850_vpif_dev = {
+	.name		= "vpif",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &da850_vpif_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= da850_vpif_resource,
+	.num_resources	= ARRAY_SIZE(da850_vpif_resource),
+};
+
+static struct resource da850_vpif_display_resource[] = {
+	{
+		.start = IRQ_DA850_VPIFINT,
+		.end   = IRQ_DA850_VPIFINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da850_vpif_display_dev = {
+	.name		= "vpif_display",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &da850_vpif_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource       = da850_vpif_display_resource,
+	.num_resources  = ARRAY_SIZE(da850_vpif_display_resource),
+};
+
+static struct resource da850_vpif_capture_resource[] = {
+	{
+		.start = IRQ_DA850_VPIFINT,
+		.end   = IRQ_DA850_VPIFINT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DA850_VPIFINT,
+		.end   = IRQ_DA850_VPIFINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da850_vpif_capture_dev = {
+	.name		= "vpif_capture",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &da850_vpif_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource       = da850_vpif_capture_resource,
+	.num_resources  = ARRAY_SIZE(da850_vpif_capture_resource),
+};
+
+int __init da850_register_vpif(void)
+{
+	return platform_device_register(&da850_vpif_dev);
+}
+
+int __init da850_register_vpif_display(struct vpif_display_config
+						*display_config)
+{
+	da850_vpif_display_dev.dev.platform_data = display_config;
+	return platform_device_register(&da850_vpif_display_dev);
+}
+
+int __init da850_register_vpif_capture(struct vpif_capture_config
+							*capture_config)
+{
+	da850_vpif_capture_dev.dev.platform_data = capture_config;
+	return platform_device_register(&da850_vpif_capture_dev);
+}
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/davinci.h linux-libre-3.7-gnu/arch/arm/mach-davinci/davinci.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/davinci.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/davinci.h	2012-12-10 22:30:57.000000000 -0500
@@ -22,10 +22,10 @@
 #include <linux/davinci_emac.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-
-#include <mach/asp.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/davinci_asp.h>
+#include <linux/platform_data/keyscan-davinci.h>
 #include <mach/hardware.h>
+#include <mach/edma.h>
 
 #include <media/davinci/vpfe_capture.h>
 #include <media/davinci/vpif_types.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/devices.c linux-libre-3.7-gnu/arch/arm/mach-davinci/devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,12 +15,12 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
 #include <mach/edma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
 #include <mach/time.h>
 
 #include "davinci.h"
@@ -313,16 +313,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static struct platform_device davinci_pcm_device = {
-	.name		= "davinci-pcm-audio",
-	.id		= -1,
-};
-
-static void davinci_init_pcm(void)
-{
-	platform_device_register(&davinci_pcm_device);
-}
-
 /*-------------------------------------------------------------------------*/
 
 struct davinci_timer_instance davinci_timer_instance[2] = {
@@ -345,7 +335,6 @@
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	davinci_init_pcm();
 	davinci_init_wdt();
 
 	return 0;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/devices-da8xx.c linux-libre-3.7-gnu/arch/arm/mach-davinci/devices-da8xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/devices-da8xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/devices-da8xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,6 +24,7 @@
 #include <mach/cpuidle.h>
 
 #include "clock.h"
+#include "asp.h"
 
 #define DA8XX_TPCC_BASE			0x01c00000
 #define DA8XX_TPTC0_BASE		0x01c08000
@@ -505,15 +506,8 @@
 	.resource	= da850_mcasp_resources,
 };
 
-static struct platform_device davinci_pcm_device = {
-	.name	= "davinci-pcm-audio",
-	.id	= -1,
-};
-
 void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
 {
-	platform_device_register(&davinci_pcm_device);
-
 	/* DA830/OMAP-L137 has 3 instances of McASP */
 	if (cpu_is_davinci_da830() && id == 1) {
 		da830_mcasp1_device.dev.platform_data = pdata;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/dm355.c linux-libre-3.7-gnu/arch/arm/mach-davinci/dm355.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/dm355.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/dm355.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,13 +26,13 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 #define DM355_UART2_BASE	(IO_PHYS + 0x206000)
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/dm365.c linux-libre-3.7-gnu/arch/arm/mach-davinci/dm365.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/dm365.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/dm365.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,14 +29,14 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 #define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/dm644x.c linux-libre-3.7-gnu/arch/arm/mach-davinci/dm644x.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/dm644x.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/dm644x.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,12 +23,12 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 /*
  * Device specific clocks
@@ -701,7 +701,7 @@
 #define DM644X_VPSS_DACCLKEN                  BIT(4)
 
 static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int mode)
+				   unsigned int pclock)
 {
 	int ret = 0;
 	u32 v = DM644X_VPSS_VENCLKEN;
@@ -711,27 +711,17 @@
 		v |= DM644X_VPSS_DACCLKEN;
 		writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
 		break;
-	case VPBE_ENC_DV_PRESET:
-		switch (mode) {
-		case V4L2_DV_480P59_94:
-		case V4L2_DV_576P50:
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
+	case VPBE_ENC_CUSTOM_TIMINGS:
+		if (pclock <= 27000000) {
+			v |= DM644X_VPSS_DACCLKEN;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-			break;
-		case V4L2_DV_720P60:
-		case V4L2_DV_1080I60:
-		case V4L2_DV_1080P30:
+		} else {
 			/*
 			 * For HD, use external clock source since
 			 * HD requires higher clock rate
 			 */
 			v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-			break;
-		default:
-			ret = -EINVAL;
-			break;
 		}
 		break;
 	default:
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/dm646x.c linux-libre-3.7-gnu/arch/arm/mach-davinci/dm646x.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/dm646x.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/dm646x.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,12 +24,12 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 #define DAVINCI_VPIF_BASE       (0x01C12000)
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/aemif.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/aemif.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/aemif.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/aemif.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci AEMIF support
- *
- * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_AEMIF_H
-#define _MACH_DAVINCI_AEMIF_H
-
-#define NRCSR_OFFSET		0x00
-#define AWCCR_OFFSET		0x04
-#define A1CR_OFFSET		0x10
-
-#define ACR_ASIZE_MASK		0x3
-#define ACR_EW_MASK		BIT(30)
-#define ACR_SS_MASK		BIT(31)
-
-/* All timings in nanoseconds */
-struct davinci_aemif_timing {
-	u8	wsetup;
-	u8	wstrobe;
-	u8	whold;
-
-	u8	rsetup;
-	u8	rstrobe;
-	u8	rhold;
-
-	u8	ta;
-};
-
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs);
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/asp.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/asp.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/asp.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/asp.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,137 +0,0 @@
-/*
- * <mach/asp.h> - DaVinci Audio Serial Port support
- */
-#ifndef __ASM_ARCH_DAVINCI_ASP_H
-#define __ASM_ARCH_DAVINCI_ASP_H
-
-#include <mach/irqs.h>
-#include <mach/edma.h>
-
-/* Bases of dm644x and dm355 register banks */
-#define DAVINCI_ASP0_BASE	0x01E02000
-#define DAVINCI_ASP1_BASE	0x01E04000
-
-/* Bases of dm365 register banks */
-#define DAVINCI_DM365_ASP0_BASE	0x01D02000
-
-/* Bases of dm646x register banks */
-#define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
-#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
-
-/* Bases of da850/da830 McASP0  register banks */
-#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
-
-/* Bases of da830 McASP1 register banks */
-#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
-
-/* EDMA channels of dm644x and dm355 */
-#define DAVINCI_DMA_ASP0_TX	2
-#define DAVINCI_DMA_ASP0_RX	3
-#define DAVINCI_DMA_ASP1_TX	8
-#define DAVINCI_DMA_ASP1_RX	9
-
-/* EDMA channels of dm646x */
-#define	DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
-#define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
-#define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
-
-/* EDMA channels of da850/da830 McASP0 */
-#define	DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
-#define	DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
-
-/* EDMA channels of da830 McASP1 */
-#define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
-#define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
-
-/* Interrupts */
-#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
-#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
-#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
-#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
-
-struct snd_platform_data {
-	u32 tx_dma_offset;
-	u32 rx_dma_offset;
-	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
-	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
-	unsigned int codec_fmt;
-	/*
-	 * Allowing this is more efficient and eliminates left and right swaps
-	 * caused by underruns, but will swap the left and right channels
-	 * when compared to previous behavior.
-	 */
-	unsigned enable_channel_combine:1;
-	unsigned sram_size_playback;
-	unsigned sram_size_capture;
-
-	/*
-	 * If McBSP peripheral gets the clock from an external pin,
-	 * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR
-	 * and MCBSP_CLKS.
-	 * Depending on different hardware connections it is possible
-	 * to use this setting to change the behaviour of McBSP
-	 * driver. The dm365_clk_input_pin enum is available for dm365
-	 */
-	int clk_input_pin;
-
-	/*
-	 * This flag works when both clock and FS are outputs for the cpu
-	 * and makes clock more accurate (FS is not symmetrical and the
-	 * clock is very fast.
-	 * The clock becoming faster is named
-	 * i2s continuous serial clock (I2S_SCK) and it is an externally
-	 * visible bit clock.
-	 *
-	 * first line : WordSelect
-	 * second line : ContinuousSerialClock
-	 * third line: SerialData
-	 *
-	 * SYMMETRICAL APPROACH:
-	 *   _______________________          LEFT
-	 * _|         RIGHT         |______________________|
-	 *     _   _         _   _   _   _         _   _
-	 *   _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_
-	 *     _   _         _   _   _   _         _   _
-	 *   _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_
-	 *    \_/ \_/       \_/ \_/ \_/ \_/       \_/ \_/
-	 *
-	 * ACCURATE CLOCK APPROACH:
-	 *   ______________          LEFT
-	 * _|     RIGHT    |_______________________________|
-	 *     _         _   _         _   _   _   _   _   _
-	 *   _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| |
-	 *     _         _   _          _      dummy cycles
-	 *   _/ \_ ... _/ \_/ \_  ... _/ \__________________
-	 *    \_/       \_/ \_/        \_/
-	 *
-	 */
-	bool i2s_accurate_sck;
-
-	/* McASP specific fields */
-	int tdm_slots;
-	u8 op_mode;
-	u8 num_serializer;
-	u8 *serial_dir;
-	u8 version;
-	u8 txnumevt;
-	u8 rxnumevt;
-};
-
-enum {
-	MCASP_VERSION_1 = 0,	/* DM646x */
-	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
-};
-
-enum dm365_clk_input_pin {
-	MCBSP_CLKR = 0,		/* DM365 */
-	MCBSP_CLKS,
-};
-
-#define INACTIVE_MODE	0
-#define TX_MODE		1
-#define RX_MODE		2
-
-#define DAVINCI_MCASP_IIS_MODE	0
-#define DAVINCI_MCASP_DIT_MODE	1
-
-#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/da8xx.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/da8xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/da8xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/da8xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -16,15 +16,18 @@
 #include <linux/platform_device.h>
 #include <linux/davinci_emac.h>
 #include <linux/spi/spi.h>
+#include <linux/platform_data/davinci_asp.h>
+#include <linux/videodev2.h>
 
 #include <mach/serial.h>
 #include <mach/edma.h>
-#include <mach/i2c.h>
-#include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
+
+#include <media/davinci/vpif_types.h>
 
 extern void __iomem *da8xx_syscfg0_base;
 extern void __iomem *da8xx_syscfg1_base;
@@ -63,6 +66,7 @@
 #define DA8XX_PLL0_BASE		0x01c11000
 #define DA8XX_TIMER64P0_BASE	0x01c20000
 #define DA8XX_TIMER64P1_BASE	0x01c21000
+#define DA8XX_VPIF_BASE		0x01e17000
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_AEMIF_CS2_BASE	0x60000000
@@ -92,6 +96,11 @@
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
 int __init da850_register_sata(unsigned long refclkpn);
+int __init da850_register_vpif(void);
+int __init da850_register_vpif_display
+			(struct vpif_display_config *display_config);
+int __init da850_register_vpif_capture
+			(struct vpif_capture_config *capture_config);
 void da8xx_restart(char mode, const char *cmd);
 
 extern struct platform_device da8xx_serial_device;
@@ -126,6 +135,8 @@
 extern const short da830_ecap2_pins[];
 extern const short da830_eqep0_pins[];
 extern const short da830_eqep1_pins[];
+extern const short da850_vpif_capture_pins[];
+extern const short da850_vpif_display_pins[];
 
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/i2c.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/i2c.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/i2c.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/i2c.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,26 +0,0 @@
-/*
- * DaVinci I2C controller platform_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
-	unsigned int	bus_freq;	/* standard bus frequency (kHz) */
-	unsigned int	bus_delay;	/* post-transaction delay (usec) */
-	unsigned int    sda_pin;        /* GPIO pin ID to use for SDA */
-	unsigned int    scl_pin;        /* GPIO pin ID to use for SCL */
-};
-
-/* for board setup code */
-void davinci_init_i2c(struct davinci_i2c_platform_data *);
-
-#endif /* __ASM_ARCH_I2C_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/keyscan.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/keyscan.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/keyscan.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/keyscan.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments, Inc
- *
- * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef DAVINCI_KEYSCAN_H
-#define DAVINCI_KEYSCAN_H
-
-#include <linux/io.h>
-
-enum davinci_matrix_types {
-	DAVINCI_KEYSCAN_MATRIX_4X4,
-	DAVINCI_KEYSCAN_MATRIX_5X3,
-};
-
-struct davinci_ks_platform_data {
-	int		(*device_enable)(struct device *dev);
-	unsigned short	*keymap;
-	u32		keymapsize;
-	u8		rep:1;
-	u8		strobe;
-	u8		interval;
-	u8		matrix_type;
-};
-
-#endif
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/mmc.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/mmc.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/mmc.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/mmc.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,39 +0,0 @@
-/*
- *  Board-specific MMC configuration
- */
-
-#ifndef _DAVINCI_MMC_H
-#define _DAVINCI_MMC_H
-
-#include <linux/types.h>
-#include <linux/mmc/host.h>
-
-struct davinci_mmc_config {
-	/* get_cd()/get_wp() may sleep */
-	int	(*get_cd)(int module);
-	int	(*get_ro)(int module);
-
-	void	(*set_power)(int module, bool on);
-
-	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
-	u8	wires;
-
-	u32     max_freq;
-
-	/* any additional host capabilities: OR'd in to mmc->f_caps */
-	u32     caps;
-
-	/* Version of the MMC/SD controller */
-	u8	version;
-
-	/* Number of sg segments */
-	u8	nr_sg;
-};
-void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
-
-enum {
-	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
-	MMC_CTLR_VERSION_2,	/* DA830 */
-};
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/mux.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/mux.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/mux.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/mux.h	2012-12-10 22:30:57.000000000 -0500
@@ -928,6 +928,48 @@
 	DA850_GPIO6_10,
 	DA850_GPIO6_13,
 	DA850_RTC_ALARM,
+
+	/* VPIF Capture */
+	DA850_VPIF_DIN0,
+	DA850_VPIF_DIN1,
+	DA850_VPIF_DIN2,
+	DA850_VPIF_DIN3,
+	DA850_VPIF_DIN4,
+	DA850_VPIF_DIN5,
+	DA850_VPIF_DIN6,
+	DA850_VPIF_DIN7,
+	DA850_VPIF_DIN8,
+	DA850_VPIF_DIN9,
+	DA850_VPIF_DIN10,
+	DA850_VPIF_DIN11,
+	DA850_VPIF_DIN12,
+	DA850_VPIF_DIN13,
+	DA850_VPIF_DIN14,
+	DA850_VPIF_DIN15,
+	DA850_VPIF_CLKIN0,
+	DA850_VPIF_CLKIN1,
+	DA850_VPIF_CLKIN2,
+	DA850_VPIF_CLKIN3,
+
+	/* VPIF Display */
+	DA850_VPIF_DOUT0,
+	DA850_VPIF_DOUT1,
+	DA850_VPIF_DOUT2,
+	DA850_VPIF_DOUT3,
+	DA850_VPIF_DOUT4,
+	DA850_VPIF_DOUT5,
+	DA850_VPIF_DOUT6,
+	DA850_VPIF_DOUT7,
+	DA850_VPIF_DOUT8,
+	DA850_VPIF_DOUT9,
+	DA850_VPIF_DOUT10,
+	DA850_VPIF_DOUT11,
+	DA850_VPIF_DOUT12,
+	DA850_VPIF_DOUT13,
+	DA850_VPIF_DOUT14,
+	DA850_VPIF_DOUT15,
+	DA850_VPIF_CLKO2,
+	DA850_VPIF_CLKO3,
 };
 
 enum davinci_tnetv107x_index {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/nand.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/nand.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/nand.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/nand.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,90 +0,0 @@
-/*
- * mach-davinci/nand.h
- *
- * Copyright © 2006 Texas Instruments.
- *
- * Ported to 2.6.23 Copyright © 2008 by
- *   Sander Huijsen <Shuijsen@optelecom-nkf.com>
- *   Troy Kisky <troy.kisky@boundarydevices.com>
- *   Dirk Behme <Dirk.Behme@gmail.com>
- *
- * --------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_NAND_H
-#define __ARCH_ARM_DAVINCI_NAND_H
-
-#include <linux/mtd/nand.h>
-
-#define NANDFCR_OFFSET		0x60
-#define NANDFSR_OFFSET		0x64
-#define NANDF1ECC_OFFSET	0x70
-
-/* 4-bit ECC syndrome registers */
-#define NAND_4BIT_ECC_LOAD_OFFSET	0xbc
-#define NAND_4BIT_ECC1_OFFSET		0xc0
-#define NAND_4BIT_ECC2_OFFSET		0xc4
-#define NAND_4BIT_ECC3_OFFSET		0xc8
-#define NAND_4BIT_ECC4_OFFSET		0xcc
-#define NAND_ERR_ADD1_OFFSET		0xd0
-#define NAND_ERR_ADD2_OFFSET		0xd4
-#define NAND_ERR_ERRVAL1_OFFSET		0xd8
-#define NAND_ERR_ERRVAL2_OFFSET		0xdc
-
-/* NOTE:  boards don't need to use these address bits
- * for ALE/CLE unless they support booting from NAND.
- * They're used unless platform data overrides them.
- */
-#define	MASK_ALE		0x08
-#define	MASK_CLE		0x10
-
-struct davinci_nand_pdata {		/* platform_data */
-	uint32_t		mask_ale;
-	uint32_t		mask_cle;
-
-	/* for packages using two chipselects */
-	uint32_t		mask_chipsel;
-
-	/* board's default static partition info */
-	struct mtd_partition	*parts;
-	unsigned		nr_parts;
-
-	/* none  == NAND_ECC_NONE (strongly *not* advised!!)
-	 * soft  == NAND_ECC_SOFT
-	 * else  == NAND_ECC_HW, according to ecc_bits
-	 *
-	 * All DaVinci-family chips support 1-bit hardware ECC.
-	 * Newer ones also support 4-bit ECC, but are awkward
-	 * using it with large page chips.
-	 */
-	nand_ecc_modes_t	ecc_mode;
-	u8			ecc_bits;
-
-	/* e.g. NAND_BUSWIDTH_16 */
-	unsigned		options;
-	/* e.g. NAND_BBT_USE_FLASH */
-	unsigned		bbt_options;
-
-	/* Main and mirror bbt descriptor overrides */
-	struct nand_bbt_descr	*bbt_td;
-	struct nand_bbt_descr	*bbt_md;
-
-	/* Access timings */
-	struct davinci_aemif_timing	*timing;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/psc.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/psc.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/psc.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/psc.h	2012-12-10 22:30:57.000000000 -0500
@@ -166,6 +166,7 @@
 #define DA830_LPSC1_McASP1		8
 #define DA850_LPSC1_SATA		8
 #define DA830_LPSC1_McASP2		9
+#define DA850_LPSC1_VPIF		9
 #define DA8XX_LPSC1_SPI1		10
 #define DA8XX_LPSC1_I2C			11
 #define DA8XX_LPSC1_UART1		12
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/spi.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/spi.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/spi.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/spi.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,89 +0,0 @@
-/*
- * Copyright 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_SPI_H
-#define __ARCH_ARM_DAVINCI_SPI_H
-
-#include <mach/edma.h>
-
-#define SPI_INTERN_CS	0xFF
-
-enum {
-	SPI_VERSION_1, /* For DM355/DM365/DM6467 */
-	SPI_VERSION_2, /* For DA8xx */
-};
-
-/**
- * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
- *
- * @version:	version of the SPI IP. Different DaVinci devices have slightly
- *		varying versions of the same IP.
- * @num_chipselect: number of chipselects supported by this SPI master
- * @intr_line:	interrupt line used to connect the SPI IP to the ARM interrupt
- *		controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel:	list of GPIOs which can act as chip-selects for the SPI.
- *		SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- *		to populate if all chip-selects are internal.
- * @cshold_bug:	set this to true if the SPI controller on your chip requires
- *		a write to CSHOLD bit in between transfers (like in DM355).
- * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
- *		device on the bus.
- */
-struct davinci_spi_platform_data {
-	u8			version;
-	u8			num_chipselect;
-	u8			intr_line;
-	u8			*chip_sel;
-	bool			cshold_bug;
-	enum dma_event_q	dma_event_q;
-};
-
-/**
- * davinci_spi_config - Per-chip-select configuration for SPI slave devices
- *
- * @wdelay:	amount of delay between transmissions. Measured in number of
- *		SPI module clocks.
- * @odd_parity:	polarity of parity flag at the end of transmit data stream.
- *		0 - odd parity, 1 - even parity.
- * @parity_enable: enable transmission of parity at end of each transmit
- *		data stream.
- * @io_type:	type of IO transfer. Choose between polled, interrupt and DMA.
- * @timer_disable: disable chip-select timers (setup and hold)
- * @c2tdelay:	chip-select setup time. Measured in number of SPI module clocks.
- * @t2cdelay:	chip-select hold time. Measured in number of SPI module clocks.
- * @t2edelay:	transmit data finished to SPI ENAn pin inactive time. Measured
- *		in number of SPI clocks.
- * @c2edelay:	chip-select active to SPI ENAn signal active time. Measured in
- *		number of SPI clocks.
- */
-struct davinci_spi_config {
-	u8	wdelay;
-	u8	odd_parity;
-	u8	parity_enable;
-#define SPI_IO_TYPE_INTR	0
-#define SPI_IO_TYPE_POLL	1
-#define SPI_IO_TYPE_DMA		2
-	u8	io_type;
-	u8	timer_disable;
-	u8	c2tdelay;
-	u8	t2cdelay;
-	u8	t2edelay;
-	u8	c2edelay;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_SPI_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/tnetv107x.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/tnetv107x.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/tnetv107x.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/tnetv107x.h	2012-12-10 22:30:57.000000000 -0500
@@ -36,8 +36,8 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/mfd/ti_ssp.h>
 
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/serial.h>
 
 struct tnetv107x_device_info {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/usb.h linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/usb.h
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/include/mach/usb.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/include/mach/usb.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,59 +0,0 @@
-/*
- * USB related definitions
- *
- * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD	(1 << 17)
-#define CFGCHIP2_VBUSSENSE	(1 << 16)
-#define CFGCHIP2_RESET		(1 << 15)
-#define CFGCHIP2_OTGMODE	(3 << 13)
-#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
-#define CFGCHIP2_FORCE_HOST	(1 << 13)
-#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
-#define CFGCHIP2_PHYPWRDN	(1 << 10)
-#define CFGCHIP2_OTGPWRDN	(1 << 9)
-#define CFGCHIP2_DATPOL 	(1 << 8)
-#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
-#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
-#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
-#define CFGCHIP2_REFFREQ	(0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
-
-struct	da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
-				     unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct	da8xx_ohci_root_hub {
-	/* Switch the port power on/off */
-	int	(*set_power)(unsigned port, int on);
-	/* Read the port power status */
-	int	(*get_power)(unsigned port);
-	/* Read the port over-current indicator */
-	int	(*get_oci)(unsigned port);
-	/* Over-current indicator change notification (pass NULL to disable) */
-	int	(*ocic_notify)(da8xx_ocic_handler_t handler);
-
-	/* Time from power on to power good (in 2 ms units) */
-	u8	potpgt;
-};
-
-void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
-
-#endif	/* ifndef __ASM_ARCH_USB_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/Kconfig linux-libre-3.7-gnu/arch/arm/mach-davinci/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -4,12 +4,12 @@
 	bool
 
 config CP_INTC
-	select IRQ_DOMAIN
 	bool
+	select IRQ_DOMAIN
 
 config ARCH_DAVINCI_DMx
-	select CPU_ARM926T
 	bool
+	select CPU_ARM926T
 
 menu "TI DaVinci Implementations"
 
@@ -32,19 +32,19 @@
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+	select CP_INTC
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select ARCH_HAS_CPUFREQ
+	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
-	select CPU_ARM926T
 	bool
+	select CPU_ARM926T
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
@@ -52,9 +52,9 @@
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_TNETV107X
+	bool "TNETV107X based system"
 	select CPU_V6
 	select CP_INTC
-	bool "TNETV107X based system"
 
 comment "DaVinci Board Type"
 
@@ -103,9 +103,9 @@
 	bool "TI DM6467 EVM"
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
-	select MACH_DAVINCI_DM6467TEVM
 	select EEPROM_AT24
 	select I2C
+	select MACH_DAVINCI_DM6467TEVM
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
@@ -127,8 +127,8 @@
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X
 	select EEPROM_AT24
+	select GPIO_PCF857X
 	select I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@@ -186,6 +186,13 @@
 	  NOTE: Please take care while choosing this option, MII PHY will
 	  not be functional if RMII mode is selected.
 
+config DA850_UI_SD_VIDEO_PORT
+	bool "Video Port Interface"
+	help
+	  Say Y if you want to use Video Port Interface (VPIF) on the
+	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
+	  UI daughter card that is supplied with the EVM.
+
 endchoice
 
 config DA850_WL12XX
diff -druN linux-libre-3.6-gnu/arch/arm/mach-davinci/usb.c linux-libre-3.7-gnu/arch/arm/mach-davinci/usb.c
--- linux-libre-3.6-gnu/arch/arm/mach-davinci/usb.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-davinci/usb.c	2012-12-10 22:30:57.000000000 -0500
@@ -10,7 +10,7 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/common.c linux-libre-3.7-gnu/arch/arm/mach-dove/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-dove/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -16,6 +16,8 @@
 #include <linux/clk-provider.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@@ -24,41 +26,31 @@
 #include <asm/mach/time.h>
 #include <asm/mach/pci.h>
 #include <mach/dove.h>
+#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
 #include <plat/time.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/irq.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"
 
-static int get_tclk(void);
-
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
 static struct map_desc dove_io_desc[] __initdata = {
 	{
-		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_SB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
 		.length		= DOVE_SB_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_NB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
 		.length		= DOVE_NB_REGS_SIZE,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
-		.length		= DOVE_PCIE0_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
-		.length		= DOVE_PCIE1_IO_SIZE,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -70,14 +62,69 @@
 /*****************************************************************************
  * CLK tree
  ****************************************************************************/
+static int dove_tclk;
+
+static DEFINE_SPINLOCK(gating_lock);
 static struct clk *tclk;
 
-static void __init clk_init(void)
+static struct clk __init *dove_register_gate(const char *name,
+					     const char *parent, u8 bit_idx)
 {
+	return clk_register_gate(NULL, name, parent, 0,
+				 (void __iomem *)CLOCK_GATING_CONTROL,
+				 bit_idx, 0, &gating_lock);
+}
+
+static void __init dove_clk_init(void)
+{
+	struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
+	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
+	struct clk *xor0, *xor1, *ge, *gephy;
+
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       get_tclk());
+				       dove_tclk);
 
-	orion_clkdev_init(tclk);
+	usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
+	usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
+	sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA);
+	pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0);
+	pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1);
+	sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0);
+	sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1);
+	nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND);
+	camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA);
+	i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0);
+	i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1);
+	crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO);
+	ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97);
+	pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
+	xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
+	xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
+	gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+	ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
+
+	orion_clkdev_add(NULL, "orion_spi.0", tclk);
+	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk);
+
+	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+	orion_clkdev_add(NULL, "orion-ehci.1", usb1);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge);
+	orion_clkdev_add(NULL, "sata_mv.0", sata);
+	orion_clkdev_add("0", "pcie", pex0);
+	orion_clkdev_add("1", "pcie", pex1);
+	orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
+	orion_clkdev_add(NULL, "sdhci-dove.1", sdio1);
+	orion_clkdev_add(NULL, "orion_nand", nand);
+	orion_clkdev_add(NULL, "cafe1000-ccic.0", camera);
+	orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0);
+	orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1);
+	orion_clkdev_add(NULL, "mv_crypto", crypto);
+	orion_clkdev_add(NULL, "dove-ac97", ac97);
+	orion_clkdev_add(NULL, "dove-pdma", pdma);
+	orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
+	orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
 }
 
 /*****************************************************************************
@@ -188,16 +235,16 @@
 	orion_time_set_base(TIMER_VIRT_BASE);
 }
 
-static int get_tclk(void)
+static int __init dove_find_tclk(void)
 {
-	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
 	return 166666667;
 }
 
 static void __init dove_timer_init(void)
 {
+	dove_tclk = dove_find_tclk();
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_DOVE_BRIDGE, get_tclk());
+			IRQ_DOVE_BRIDGE, dove_tclk);
 }
 
 struct sys_timer dove_timer = {
@@ -205,6 +252,15 @@
 };
 
 /*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+void __init dove_crypto_init(void)
+{
+	orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
+			  DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
+}
+
+/*****************************************************************************
  * XOR 0
  ****************************************************************************/
 void __init dove_xor0_init(void)
@@ -285,16 +341,16 @@
 
 void __init dove_init(void)
 {
-	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
-	tauros2_init();
+	tauros2_init(0);
 #endif
 	dove_setup_cpu_mbus();
 
 	/* Setup root of clk tree */
-	clk_init();
+	dove_clk_init();
 
 	/* internal devices that every board has */
 	dove_rtc_init();
@@ -317,3 +373,66 @@
 	while (1)
 		;
 }
+
+#if defined(CONFIG_MACH_DOVE_DT)
+/*
+ * Auxdata required until real OF clock provider
+ */
+struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
+	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+		       NULL),
+	OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
+	{},
+};
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init(0);
+#endif
+	dove_setup_cpu_mbus();
+
+	/* Setup root of clk tree */
+	dove_clk_init();
+
+	/* Internal devices not ported to DT yet */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+
+	dove_ge00_init(&dove_dt_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_pcie_init(1, 1);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     dove_auxdata_lookup, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+	"marvell,dove",
+	NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+	.map_io		= dove_map_io,
+	.init_early	= dove_init_early,
+	.init_irq	= orion_dt_init_irq,
+	.timer		= &dove_timer,
+	.init_machine	= dove_dt_init,
+	.restart	= dove_restart,
+	.dt_compat	= dove_dt_board_compat,
+MACHINE_END
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/common.h linux-libre-3.7-gnu/arch/arm/mach-dove/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-dove/common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -26,7 +26,11 @@
 void dove_setup_cpu_mbus(void);
 void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void dove_sata_init(struct mv_sata_platform_data *sata_data);
+#ifdef CONFIG_PCI
 void dove_pcie_init(int init_port0, int init_port1);
+#else
+static inline void dove_pcie_init(int init_port0, int init_port1) { }
+#endif
 void dove_ehci0_init(void);
 void dove_ehci1_init(void);
 void dove_uart0_init(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/bridge-regs.h linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/bridge-regs.h
--- linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/bridge-regs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/bridge-regs.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,22 +13,22 @@
 
 #include <mach/dove.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0000)
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define  CPU_CTRL_PCIE0_LINK	0x00000001
 #define  CPU_RESET		0x00000002
 #define  CPU_CTRL_PCIE1_LINK	0x00000008
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define  SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define  SOFT_RESET		0x00000001
 
 #define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define FIQ_MASK_LOW_OFF	0x0008
@@ -47,9 +47,9 @@
 #define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
 #define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
 
-#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE + 0x011c)
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE + 0x0300)
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/dove.h linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/dove.h
--- linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/dove.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/dove.h	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,7 @@
  */
 
 #define DOVE_CESA_PHYS_BASE		0xc8000000
-#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_VIRT_BASE		IOMEM(0xfdb00000)
 #define DOVE_CESA_SIZE			SZ_1M
 
 #define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
@@ -38,101 +38,99 @@
 #define DOVE_BOOTROM_SIZE		SZ_128M
 
 #define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
-#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_VIRT_BASE	IOMEM(0xfdd00000)
 #define DOVE_SCRATCHPAD_SIZE		SZ_1M
 
 #define DOVE_SB_REGS_PHYS_BASE		0xf1000000
-#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_VIRT_BASE		IOMEM(0xfde00000)
 #define DOVE_SB_REGS_SIZE		SZ_8M
 
 #define DOVE_NB_REGS_PHYS_BASE		0xf1800000
-#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_VIRT_BASE		IOMEM(0xfe600000)
 #define DOVE_NB_REGS_SIZE		SZ_8M
 
 #define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
-#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
 #define DOVE_PCIE0_IO_BUS_BASE		0x00000000
-#define DOVE_PCIE0_IO_SIZE		SZ_1M
+#define DOVE_PCIE0_IO_SIZE		SZ_64K
 
 #define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
-#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
-#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
-#define DOVE_PCIE1_IO_SIZE		SZ_1M
+#define DOVE_PCIE1_IO_BUS_BASE		0x00010000
+#define DOVE_PCIE1_IO_SIZE		SZ_64K
 
 /*
  * Dove Core Registers Map
  */
 
 /* SPI, I2C, UART */
-#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
-#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
-#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
-#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
-#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
-#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
-#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
-#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
-#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
-#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
-#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x14600)
 
 /* North-South Bridge */
-#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x20000)
 
 /* Cryptographic Engine */
-#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x30000)
 
 /* PCIe 0 */
-#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x40000)
 
 /* USB */
-#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
-#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x51000)
 
 /* XOR 0 Engine */
-#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
-#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
-#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
-#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60A00)
 
 /* XOR 1 Engine */
-#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
-#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
-#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
-#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60B00)
 
 /* Gigabit Ethernet */
-#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x70000)
 
 /* PCIe 1 */
-#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x80000)
 
 /* CAFE */
-#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
-#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
-#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
-#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x98000)
 
 /* SATA */
-#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xa0000)
 
 /* I2S/SPDIF */
-#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
-#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb4000)
 
 /* NAND Flash Controller */
-#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xc0000)
 
 /* MPP, GPIO, Reset Sampling */
-#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
 #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
-#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
-#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
-#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0420)
-#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
-#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE + 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE + 0x018)
+#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0400)
+#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0420)
+#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE + 0xe8400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
 #define  DOVE_NAND_GPIO_EN		(1 << 0)
 #define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
@@ -144,44 +142,44 @@
 #define  DOVE_SD0_GPIO_SEL		(1 << 0)
 
 /* Power Management */
-#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0000)
 #define DOVE_PMU_SIG_CTRL	(DOVE_PMU_VIRT_BASE + 0x802c)
 
 /* Real Time Clock */
-#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xd8500)
 
 /* AC97 */
-#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
-#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe0000)
 
 /* Peripheral DMA */
-#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
-#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe4000)
 
-#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
-#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE + 0xe8030)
 #define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
 #define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
 #define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
-#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
-#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE + 0xe8034)
 #define  DOVE_SSP_ON_AU1		(1 << 0)
 #define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
 #define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
 /* Memory Controller */
-#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE + 0x00000)
 
 /* LCD Controller */
-#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
-#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x30000)
 
 /* Graphic Engine */
-#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x40000)
 
 /* Video Engine */
-#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x400000)
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "dove.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(a)  	((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
-						 DOVE_PCIE0_IO_VIRT_BASE))
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/pm.h linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/pm.h
--- linux-libre-3.6-gnu/arch/arm/mach-dove/include/mach/pm.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/include/mach/pm.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,24 +13,42 @@
 #include <mach/irqs.h>
 
 #define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
-#define  CLOCK_GATING_USB0_MASK		(1 << 0)
-#define  CLOCK_GATING_USB1_MASK		(1 << 1)
-#define  CLOCK_GATING_GBE_MASK		(1 << 2)
-#define  CLOCK_GATING_SATA_MASK		(1 << 3)
-#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
-#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
-#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
-#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
-#define  CLOCK_GATING_NAND_MASK		(1 << 10)
-#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
-#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
-#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
-#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
-#define  CLOCK_GATING_AC97_MASK		(1 << 21)
-#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
-#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
-#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
-#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+#define  CLOCK_GATING_BIT_USB0		0
+#define  CLOCK_GATING_BIT_USB1		1
+#define  CLOCK_GATING_BIT_GBE		2
+#define  CLOCK_GATING_BIT_SATA		3
+#define  CLOCK_GATING_BIT_PCIE0		4
+#define  CLOCK_GATING_BIT_PCIE1		5
+#define  CLOCK_GATING_BIT_SDIO0		8
+#define  CLOCK_GATING_BIT_SDIO1		9
+#define  CLOCK_GATING_BIT_NAND		10
+#define  CLOCK_GATING_BIT_CAMERA	11
+#define  CLOCK_GATING_BIT_I2S0		12
+#define  CLOCK_GATING_BIT_I2S1		13
+#define  CLOCK_GATING_BIT_CRYPTO	15
+#define  CLOCK_GATING_BIT_AC97		21
+#define  CLOCK_GATING_BIT_PDMA		22
+#define  CLOCK_GATING_BIT_XOR0		23
+#define  CLOCK_GATING_BIT_XOR1		24
+#define  CLOCK_GATING_BIT_GIGA_PHY	30
+#define  CLOCK_GATING_USB0_MASK		(1 << CLOCK_GATING_BIT_USB0)
+#define  CLOCK_GATING_USB1_MASK		(1 << CLOCK_GATING_BIT_USB1)
+#define  CLOCK_GATING_GBE_MASK		(1 << CLOCK_GATING_BIT_GBE)
+#define  CLOCK_GATING_SATA_MASK		(1 << CLOCK_GATING_BIT_SATA)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << CLOCK_GATING_BIT_PCIE0)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << CLOCK_GATING_BIT_PCIE1)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << CLOCK_GATING_BIT_SDIO0)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << CLOCK_GATING_BIT_SDIO1)
+#define  CLOCK_GATING_NAND_MASK		(1 << CLOCK_GATING_BIT_NAND)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << CLOCK_GATING_BIT_CAMERA)
+#define  CLOCK_GATING_I2S0_MASK		(1 << CLOCK_GATING_BIT_I2S0)
+#define  CLOCK_GATING_I2S1_MASK		(1 << CLOCK_GATING_BIT_I2S1)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << CLOCK_GATING_BIT_CRYPTO)
+#define  CLOCK_GATING_AC97_MASK		(1 << CLOCK_GATING_BIT_AC97)
+#define  CLOCK_GATING_PDMA_MASK		(1 << CLOCK_GATING_BIT_PDMA)
+#define  CLOCK_GATING_XOR0_MASK		(1 << CLOCK_GATING_BIT_XOR0)
+#define  CLOCK_GATING_XOR1_MASK		(1 << CLOCK_GATING_BIT_XOR1)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
 #define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
@@ -45,7 +63,7 @@
 
 static inline int irq_to_pmu(int irq)
 {
-	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
 		return irq - IRQ_DOVE_PMU_START;
 
 	return -EINVAL;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/irq.c linux-libre-3.7-gnu/arch/arm/mach-dove/irq.c
--- linux-libre-3.6-gnu/arch/arm/mach-dove/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/irq.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,6 +18,7 @@
 #include <asm/mach/irq.h>
 #include <mach/pm.h>
 #include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
 #include "common.h"
 
 static void pmu_irq_mask(struct irq_data *d)
@@ -45,8 +46,20 @@
 	int pin = irq_to_pmu(d->irq);
 	u32 u;
 
+	/*
+	 * The PMU mask register is not RW0C: it is RW.  This means that
+	 * the bits take whatever value is written to them; if you write
+	 * a '1', you will set the interrupt.
+	 *
+	 * Unfortunately this means there is NO race free way to clear
+	 * these interrupts.
+	 *
+	 * So, let's structure the code so that the window is as small as
+	 * possible.
+	 */
 	u = ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_CAUSE);
+	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
+	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
 }
 
 static struct irq_chip pmu_irq_chip = {
@@ -99,19 +112,19 @@
 {
 	int i;
 
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 
 	/*
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/Kconfig linux-libre-3.7-gnu/arch/arm/mach-dove/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-dove/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -15,6 +15,13 @@
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
+config MACH_DOVE_DT
+	bool "Marvell Dove Flattened Device Tree"
+	select USE_OF
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
 endmenu
 
 endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/Makefile linux-libre-3.7-gnu/arch/arm/mach-dove/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-dove/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -1,4 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
-
+obj-y				+= common.o addr-map.o irq.o mpp.o
+obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/mpp.c linux-libre-3.7-gnu/arch/arm/mach-dove/mpp.c
--- linux-libre-3.6-gnu/arch/arm/mach-dove/mpp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/mpp.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <plat/mpp.h>
 #include <mach/dove.h>
+#include <plat/orion-gpio.h>
 #include "mpp.h"
 
 struct dove_mpp_grp {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-dove/pcie.c linux-libre-3.7-gnu/arch/arm/mach-dove/pcie.c
--- linux-libre-3.6-gnu/arch/arm/mach-dove/pcie.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-dove/pcie.c	2012-12-10 22:30:57.000000000 -0500
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/clk.h>
 #include <video/vga.h>
 #include <asm/mach/pci.h>
 #include <asm/mach/arch.h>
@@ -26,9 +27,8 @@
 	u8			root_bus_nr;
 	void __iomem		*base;
 	spinlock_t		conf_lock;
-	char			io_space_name[16];
 	char			mem_space_name[16];
-	struct resource		res[2];
+	struct resource		res;
 };
 
 static struct pcie_port pcie_port[2];
@@ -53,24 +53,10 @@
 
 	orion_pcie_setup(pp->base);
 
-	/*
-	 * IORESOURCE_IO
-	 */
-	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-		 "PCIe %d I/O", pp->index);
-	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-	pp->res[0].name = pp->io_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
-		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
-	} else {
-		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
-		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
-	}
-	pp->res[0].flags = IORESOURCE_IO;
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
+	if (pp->index == 0)
+		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE);
+	else
+		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE);
 
 	/*
 	 * IORESOURCE_MEM
@@ -78,18 +64,18 @@
 	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 		 "PCIe %d MEM", pp->index);
 	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[1].name = pp->mem_space_name;
+	pp->res.name = pp->mem_space_name;
 	if (pp->index == 0) {
-		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
-		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+		pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE;
+		pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1;
 	} else {
-		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
-		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+		pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE;
+		pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1;
 	}
-	pp->res[1].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[1]))
+	pp->res.flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res))
 		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
 	return 1;
 }
@@ -197,20 +183,24 @@
 	.map_irq	= dove_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Dove PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+		struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0"));
+
+		if (!IS_ERR(clk))
+			clk_prepare_enable(clk);
 
 		printk(KERN_INFO "link up\n");
 
 		pp->index = index;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
-		memset(pp->res, 0, sizeof(pp->res));
+		memset(&pp->res, 0, sizeof(pp->res));
 	} else {
 		printk(KERN_INFO "link down, ignoring\n");
 	}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ebsa110/core.c linux-libre-3.7-gnu/arch/arm/mach-ebsa110/core.c
--- linux-libre-3.6-gnu/arch/arm/mach-ebsa110/core.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ebsa110/core.c	2012-12-10 22:30:57.000000000 -0500
@@ -74,22 +74,22 @@
 	 * sparse external-decode ISAIO space
 	 */
 	{	/* IRQ_STAT/IRQ_MCLR */
-		.virtual	= IRQ_STAT,
+		.virtual	= (unsigned long)IRQ_STAT,
 		.pfn		= __phys_to_pfn(TRICK4_PHYS),
 		.length		= TRICK4_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* IRQ_MASK/IRQ_MSET */
-		.virtual	= IRQ_MASK,
+		.virtual	= (unsigned long)IRQ_MASK,
 		.pfn		= __phys_to_pfn(TRICK3_PHYS),
 		.length		= TRICK3_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* SOFT_BASE */
-		.virtual	= SOFT_BASE,
+		.virtual	= (unsigned long)SOFT_BASE,
 		.pfn		= __phys_to_pfn(TRICK1_PHYS),
 		.length		= TRICK1_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PIT_BASE */
-		.virtual	= PIT_BASE,
+		.virtual	= (unsigned long)PIT_BASE,
 		.pfn		= __phys_to_pfn(TRICK0_PHYS),
 		.length		= TRICK0_SIZE,
 		.type		= MT_DEVICE
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ebsa110/core.h linux-libre-3.7-gnu/arch/arm/mach-ebsa110/core.h
--- linux-libre-3.6-gnu/arch/arm/mach-ebsa110/core.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ebsa110/core.h	2012-12-10 22:30:57.000000000 -0500
@@ -31,11 +31,11 @@
 #define TRICK7_PHYS		0xf3c00000
 
 /* Virtual addresses */
-#define PIT_BASE		0xfc000000	/* trick 0 */
-#define SOFT_BASE		0xfd000000	/* trick 1 */
-#define IRQ_MASK		0xfe000000	/* trick 3 - read */
-#define IRQ_MSET		0xfe000000	/* trick 3 - write */
-#define IRQ_STAT		0xff000000	/* trick 4 - read */
-#define IRQ_MCLR		0xff000000	/* trick 4 - write */
+#define PIT_BASE		IOMEM(0xfc000000)	/* trick 0 */
+#define SOFT_BASE		IOMEM(0xfd000000)	/* trick 1 */
+#define IRQ_MASK		IOMEM(0xfe000000)	/* trick 3 - read */
+#define IRQ_MSET		IOMEM(0xfe000000)	/* trick 3 - write */
+#define IRQ_STAT		IOMEM(0xff000000)	/* trick 4 - read */
+#define IRQ_MCLR		IOMEM(0xff000000)	/* trick 4 - write */
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ebsa110/leds.c linux-libre-3.7-gnu/arch/arm/mach-ebsa110/leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-ebsa110/leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ebsa110/leds.c	2012-12-10 22:30:57.000000000 -0500
@@ -1,52 +1,71 @@
 /*
- *  linux/arch/arm/mach-ebsa110/leds.c
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA-110 LED control routines.  We use the led as follows:
+ * Driver for the LED found on the EBSA110 machine
+ * Based on Versatile and RealView machine LED code
  *
- *   - Red - toggles state every 50 timer interrupts
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
-#include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
-#include <mach/hardware.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include "core.h"
 
-static spinlock_t leds_lock;
-
-static void ebsa110_leds_event(led_event_t ledevt)
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void ebsa110_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	unsigned long flags;
+	u8 reg = __raw_readb(SOFT_BASE);
 
-	spin_lock_irqsave(&leds_lock, flags);
+	if (b != LED_OFF)
+		reg |= 0x80;
+	else
+		reg &= ~0x80;
 
-	switch(ledevt) {
-	case led_timer:
-		*(volatile unsigned char *)SOFT_BASE ^= 128;
-		break;
+	__raw_writeb(reg, SOFT_BASE);
+}
 
-	default:
-		break;
-	}
+static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
+{
+	u8 reg = __raw_readb(SOFT_BASE);
 
-	spin_unlock_irqrestore(&leds_lock, flags);
+	return (reg & 0x80) ? LED_FULL : LED_OFF;
 }
 
-static int __init leds_init(void)
+static int __init ebsa110_leds_init(void)
 {
-	if (machine_is_ebsa110())
-		leds_event = ebsa110_leds_event;
+
+	struct led_classdev *cdev;
+	int ret;
+
+	if (!machine_is_ebsa110())
+		return -ENODEV;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->name = "ebsa110:0";
+	cdev->brightness_set = ebsa110_led_set;
+	cdev->brightness_get = ebsa110_led_get;
+	cdev->default_trigger = "heartbeat";
+
+	ret = led_classdev_register(NULL, cdev);
+	if (ret	< 0) {
+		kfree(cdev);
+		return ret;
+	}
 
 	return 0;
 }
 
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa110_leds_init);
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ebsa110/Makefile linux-libre-3.7-gnu/arch/arm/mach-ebsa110/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-ebsa110/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ebsa110/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -4,9 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= core.o io.o
+obj-y			:= core.o io.o leds.o
 obj-m			:=
 obj-n			:=
 obj-			:=
-
-obj-$(CONFIG_LEDS)	+= leds.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/adssphere.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/adssphere.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/adssphere.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/adssphere.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/sizes.h>
 
 #include <mach/hardware.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/core.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/core.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/core.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/core.c	2012-12-10 22:30:57.000000000 -0500
@@ -36,9 +36,9 @@
 #include <linux/export.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_keypad.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/mach/map.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/dma.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/dma.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/dma.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/dma.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
 #include <mach/hardware.h>
 
 #include "soc.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/edb93xx.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/edb93xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/edb93xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/edb93xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -35,8 +35,8 @@
 #include <sound/cs4271.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/gesbc9312.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/gesbc9312.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/gesbc9312.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/gesbc9312.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/sizes.h>
 
 #include <mach/hardware.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/dma.h linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/dma.h
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/dma.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/dma.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,93 +0,0 @@
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-
-/*
- * M2P channels.
- *
- * Note that these values are also directly used for setting the PPALLOC
- * register.
- */
-#define EP93XX_DMA_I2S1		0
-#define EP93XX_DMA_I2S2		1
-#define EP93XX_DMA_AAC1		2
-#define EP93XX_DMA_AAC2		3
-#define EP93XX_DMA_AAC3		4
-#define EP93XX_DMA_I2S3		5
-#define EP93XX_DMA_UART1	6
-#define EP93XX_DMA_UART2	7
-#define EP93XX_DMA_UART3	8
-#define EP93XX_DMA_IRDA		9
-/* M2M channels */
-#define EP93XX_DMA_SSP		10
-#define EP93XX_DMA_IDE		11
-
-/**
- * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
- * @port: peripheral which is requesting the channel
- * @direction: TX/RX channel
- * @name: optional name for the channel, this is displayed in /proc/interrupts
- *
- * This information is passed as private channel parameter in a filter
- * function. Note that this is only needed for slave/cyclic channels.  For
- * memcpy channels %NULL data should be passed.
- */
-struct ep93xx_dma_data {
-	int				port;
-	enum dma_transfer_direction	direction;
-	const char			*name;
-};
-
-/**
- * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
- * @name: name of the channel, used for getting the right clock for the channel
- * @base: mapped registers
- * @irq: interrupt number used by this channel
- */
-struct ep93xx_dma_chan_data {
-	const char			*name;
-	void __iomem			*base;
-	int				irq;
-};
-
-/**
- * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
- * @channels: array of channels which are passed to the driver
- * @num_channels: number of channels in the array
- *
- * This structure is passed to the DMA engine driver via platform data. For
- * M2P channels, contract is that even channels are for TX and odd for RX.
- * There is no requirement for the M2M channels.
- */
-struct ep93xx_dma_platform_data {
-	struct ep93xx_dma_chan_data	*channels;
-	size_t				num_channels;
-};
-
-static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
-}
-
-/**
- * ep93xx_dma_chan_direction - returns direction the channel can be used
- * @chan: channel
- *
- * This function can be used in filter functions to find out whether the
- * channel supports given DMA direction. Only M2P channels have such
- * limitation, for M2M channels the direction is configurable.
- */
-static inline enum dma_transfer_direction
-ep93xx_dma_chan_direction(struct dma_chan *chan)
-{
-	if (!ep93xx_dma_chan_is_m2p(chan))
-		return DMA_NONE;
-
-	/* even channels are for TX, odd for RX */
-	return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-}
-
-#endif /* __ASM_ARCH_DMA_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
-#define __ASM_ARCH_EP93XX_KEYPAD_H
-
-struct matrix_keymap_data;
-
-/* flags for the ep93xx_keypad driver */
-#define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
-#define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
-#define EP93XX_KEYPAD_BACK_DRIVE	(1<<2)	/* back driving mode */
-#define EP93XX_KEYPAD_TEST_MODE		(1<<3)	/* scan only column 0 */
-#define EP93XX_KEYPAD_KDIV		(1<<4)	/* 1/4 clock or 1/16 clock */
-#define EP93XX_KEYPAD_AUTOREPEAT	(1<<5)	/* enable key autorepeat */
-
-/**
- * struct ep93xx_keypad_platform_data - platform specific device structure
- * @keymap_data:	pointer to &matrix_keymap_data
- * @debounce:		debounce start count; terminal count is 0xff
- * @prescale:		row/column counter pre-scaler load value
- * @flags:		see above
- */
-struct ep93xx_keypad_platform_data {
-	struct matrix_keymap_data *keymap_data;
-	unsigned int	debounce;
-	unsigned int	prescale;
-	unsigned int	flags;
-};
-
-#define EP93XX_MATRIX_ROWS		(8)
-#define EP93XX_MATRIX_COLS		(8)
-
-#endif	/* __ASM_ARCH_EP93XX_KEYPAD_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_EP93XX_SPI_H
-#define __ASM_MACH_EP93XX_SPI_H
-
-struct spi_device;
-
-/**
- * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @num_chipselect: number of chip selects on this board, must be
- *                  at least one
- * @use_dma: use DMA for the transfers
- */
-struct ep93xx_spi_info {
-	int	num_chipselect;
-	bool	use_dma;
-};
-
-/**
- * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
- * @setup: setup the chip select mechanism
- * @cleanup: cleanup the chip select mechanism
- * @cs_control: control the device chip select
- */
-struct ep93xx_spi_chip_ops {
-	int	(*setup)(struct spi_device *spi);
-	void	(*cleanup)(struct spi_device *spi);
-	void	(*cs_control)(struct spi_device *spi, int value);
-};
-
-#endif /* __ASM_MACH_EP93XX_SPI_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/fb.h linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/fb.h
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/fb.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/fb.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/fb.h
- */
-
-#ifndef __ASM_ARCH_EP93XXFB_H
-#define __ASM_ARCH_EP93XXFB_H
-
-struct platform_device;
-struct fb_videomode;
-struct fb_info;
-
-#define EP93XXFB_USE_MODEDB		0
-
-/* VideoAttributes flags */
-#define EP93XXFB_STATE_MACHINE_ENABLE	(1 << 0)
-#define EP93XXFB_PIXEL_CLOCK_ENABLE	(1 << 1)
-#define EP93XXFB_VSYNC_ENABLE		(1 << 2)
-#define EP93XXFB_PIXEL_DATA_ENABLE	(1 << 3)
-#define EP93XXFB_COMPOSITE_SYNC		(1 << 4)
-#define EP93XXFB_SYNC_VERT_HIGH		(1 << 5)
-#define EP93XXFB_SYNC_HORIZ_HIGH	(1 << 6)
-#define EP93XXFB_SYNC_BLANK_HIGH	(1 << 7)
-#define EP93XXFB_PCLK_FALLING		(1 << 8)
-#define EP93XXFB_ENABLE_AC		(1 << 9)
-#define EP93XXFB_ENABLE_LCD		(1 << 10)
-#define EP93XXFB_ENABLE_CCIR		(1 << 12)
-#define EP93XXFB_USE_PARALLEL_INTERFACE	(1 << 13)
-#define EP93XXFB_ENABLE_INTERRUPT	(1 << 14)
-#define EP93XXFB_USB_INTERLACE		(1 << 16)
-#define EP93XXFB_USE_EQUALIZATION	(1 << 17)
-#define EP93XXFB_USE_DOUBLE_HORZ	(1 << 18)
-#define EP93XXFB_USE_DOUBLE_VERT	(1 << 19)
-#define EP93XXFB_USE_BLANK_PIXEL	(1 << 20)
-#define EP93XXFB_USE_SDCSN0		(0 << 21)
-#define EP93XXFB_USE_SDCSN1		(1 << 21)
-#define EP93XXFB_USE_SDCSN2		(2 << 21)
-#define EP93XXFB_USE_SDCSN3		(3 << 21)
-
-#define EP93XXFB_ENABLE			(EP93XXFB_STATE_MACHINE_ENABLE	| \
-					 EP93XXFB_PIXEL_CLOCK_ENABLE	| \
-					 EP93XXFB_VSYNC_ENABLE		| \
-					 EP93XXFB_PIXEL_DATA_ENABLE)
-
-struct ep93xxfb_mach_info {
-	unsigned int			num_modes;
-	const struct fb_videomode	*modes;
-	const struct fb_videomode	*default_mode;
-	int				bpp;
-	unsigned int			flags;
-
-	int	(*setup)(struct platform_device *pdev);
-	void	(*teardown)(struct platform_device *pdev);
-	void	(*blank)(int blank_mode, struct fb_info *info);
-};
-
-#endif /* __ASM_ARCH_EP93XXFB_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-/* empty */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt		phys		size
- * febff000	22000000	4K	model number register (bits 0-2)
- * febfe000	22400000	4K	options register
- * febfd000	22800000	4K	options register #2
- * febf9000	10800000	4K	TS-5620 RTC index register
- * febf8000	11700000	4K	TS-5620 RTC data register
- */
-
-#define TS72XX_MODEL_PHYS_BASE		0x22000000
-#define TS72XX_MODEL_VIRT_BASE		0xfebff000
-#define TS72XX_MODEL_SIZE		0x00001000
-
-#define TS72XX_MODEL_TS7200		0x00
-#define TS72XX_MODEL_TS7250		0x01
-#define TS72XX_MODEL_TS7260		0x02
-#define TS72XX_MODEL_TS7300		0x03
-#define TS72XX_MODEL_TS7400		0x04
-#define TS72XX_MODEL_MASK		0x07
-
-
-#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
-#define TS72XX_OPTIONS_SIZE		0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485	0x02
-#define TS72XX_OPTIONS_MAX197		0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
-#define TS72XX_OPTIONS2_SIZE		0x00001000
-
-#define TS72XX_OPTIONS2_TS9420		0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
-
-
-#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
-#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
-#define TS72XX_RTC_INDEX_SIZE		0x00001000
-
-#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
-#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
-#define TS72XX_RTC_DATA_SIZE		0x00001000
-
-#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
-#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
-
-#ifndef __ASSEMBLY__
-
-static inline int ts72xx_model(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
-}
-
-static inline int board_is_ts7200(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7260;
-}
-
-static inline int board_is_ts7300(void)
-{
-	return ts72xx_model()  == TS72XX_MODEL_TS7300;
-}
-
-static inline int board_is_ts7400(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7400;
-}
-
-static inline int is_max197_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-					TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
-					TS72XX_OPTIONS2_TS9420);
-}
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/simone.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/simone.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/simone.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/simone.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,7 +22,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/snappercl15.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/snappercl15.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/snappercl15.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/snappercl15.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,7 +28,7 @@
 #include <linux/mtd/nand.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/ts72xx.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/ts72xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/ts72xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/ts72xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,7 +21,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <mach/hardware.h>
-#include <mach/ts72xx.h>
 
 #include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
@@ -29,30 +28,31 @@
 #include <asm/mach/arch.h>
 
 #include "soc.h"
+#include "ts72xx.h"
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{
-		.virtual	= TS72XX_MODEL_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_MODEL_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
 		.length		= TS72XX_MODEL_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_OPTIONS_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
 		.length		= TS72XX_OPTIONS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_OPTIONS2_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
 		.length		= TS72XX_OPTIONS2_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_RTC_INDEX_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_RTC_INDEX_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE),
 		.length		= TS72XX_RTC_INDEX_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_RTC_DATA_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_RTC_DATA_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE),
 		.length		= TS72XX_RTC_DATA_SIZE,
 		.type		= MT_DEVICE,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/ts72xx.h linux-libre-3.7-gnu/arch/arm/mach-ep93xx/ts72xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/ts72xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/ts72xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
+ */
+
+/*
+ * TS72xx memory map:
+ *
+ * virt		phys		size
+ * febff000	22000000	4K	model number register (bits 0-2)
+ * febfe000	22400000	4K	options register
+ * febfd000	22800000	4K	options register #2
+ * febf9000	10800000	4K	TS-5620 RTC index register
+ * febf8000	11700000	4K	TS-5620 RTC data register
+ */
+
+#define TS72XX_MODEL_PHYS_BASE		0x22000000
+#define TS72XX_MODEL_VIRT_BASE		IOMEM(0xfebff000)
+#define TS72XX_MODEL_SIZE		0x00001000
+
+#define TS72XX_MODEL_TS7200		0x00
+#define TS72XX_MODEL_TS7250		0x01
+#define TS72XX_MODEL_TS7260		0x02
+#define TS72XX_MODEL_TS7300		0x03
+#define TS72XX_MODEL_TS7400		0x04
+#define TS72XX_MODEL_MASK		0x07
+
+
+#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE	IOMEM(0xfebfe000)
+#define TS72XX_OPTIONS_SIZE		0x00001000
+
+#define TS72XX_OPTIONS_COM2_RS485	0x02
+#define TS72XX_OPTIONS_MAX197		0x01
+
+
+#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE	IOMEM(0xfebfd000)
+#define TS72XX_OPTIONS2_SIZE		0x00001000
+
+#define TS72XX_OPTIONS2_TS9420		0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
+
+
+#define TS72XX_RTC_INDEX_VIRT_BASE	IOMEM(0xfebf9000)
+#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
+#define TS72XX_RTC_INDEX_SIZE		0x00001000
+
+#define TS72XX_RTC_DATA_VIRT_BASE	IOMEM(0xfebf8000)
+#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
+#define TS72XX_RTC_DATA_SIZE		0x00001000
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+
+#ifndef __ASSEMBLY__
+
+static inline int ts72xx_model(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
+}
+
+static inline int board_is_ts7200(void)
+{
+	return ts72xx_model() == TS72XX_MODEL_TS7200;
+}
+
+static inline int board_is_ts7250(void)
+{
+	return ts72xx_model() == TS72XX_MODEL_TS7250;
+}
+
+static inline int board_is_ts7260(void)
+{
+	return ts72xx_model() == TS72XX_MODEL_TS7260;
+}
+
+static inline int board_is_ts7300(void)
+{
+	return ts72xx_model()  == TS72XX_MODEL_TS7300;
+}
+
+static inline int board_is_ts7400(void)
+{
+	return ts72xx_model() == TS72XX_MODEL_TS7400;
+}
+
+static inline int is_max197_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+					TS72XX_OPTIONS_MAX197);
+}
+
+static inline int is_ts9420_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+					TS72XX_OPTIONS2_TS9420);
+}
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ep93xx/vision_ep9307.c linux-libre-3.7-gnu/arch/arm/mach-ep93xx/vision_ep9307.c
--- linux-libre-3.6-gnu/arch/arm/mach-ep93xx/vision_ep9307.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ep93xx/vision_ep9307.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,8 +30,8 @@
 #include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/clock-exynos4.c linux-libre-3.7-gnu/arch/arm/mach-exynos/clock-exynos4.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/clock-exynos4.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/clock-exynos4.c	2012-12-10 22:30:57.000000000 -0500
@@ -501,6 +501,10 @@
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
+		.name		= "tsi",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
 		.name		= "hsmmc",
 		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
@@ -530,6 +534,14 @@
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
+		.name		= "onenand",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "nfcon",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 16),
+	}, {
 		.name		= "dac",
 		.devname	= "s5p-sdo",
 		.enable		= exynos4_clk_ip_tv_ctrl,
@@ -615,6 +627,25 @@
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 21),
 	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.1",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.2",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 23),
+	}, {
+		.name		= "slimbus",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "spdif",
+		.devname	= "samsung-spdif",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
 		.name		= "ac97",
 		.devname	= "samsung-ac97",
 		.enable		= exynos4_clk_ip_peril_ctrl,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/clock-exynos5.c linux-libre-3.7-gnu/arch/arm/mach-exynos/clock-exynos5.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/clock-exynos5.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/clock-exynos5.c	2012-12-10 22:30:57.000000000 -0500
@@ -166,11 +166,6 @@
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
 }
 
-static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
-}
-
 static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
@@ -552,6 +547,68 @@
 	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl_mid",
+	},
+	.sources = &exynos5_clkset_aclk,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
+	[0] = &exynos5_clk_sclk_vpll.clk,
+	[1] = &exynos5_clk_mout_cpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
+	.sources	= exynos5_clkset_aclk_300_mid1_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl_mid1",
+	},
+	.sources = &exynos5_clkset_aclk_300_gscl_mid1,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
+	[0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
+	[1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
+	.sources	= exynos5_clkset_aclk_300_gscl_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl",
+	},
+	.sources = &exynos5_clkset_aclk_300_gscl,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_gscl_300_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &exynos5_clk_mout_aclk_300_gscl.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_gscl_300 = {
+	.sources	= exynos5_clk_src_gscl_300_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
+	.clk	= {
+		.name		= "aclk_300_gscl",
+	},
+	.sources = &exynos5_clk_src_gscl_300,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
+};
+
 static struct clk exynos5_init_clocks_off[] = {
 	{
 		.name		= "timers",
@@ -569,35 +626,30 @@
 		.enable		= exynos5_clk_ip_peris_ctrl,
 		.ctrlbit	= (1 << 19),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.0",
+		.name		= "biu",	/* bus interface unit clock */
+		.devname	= "dw_mmc.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.1",
+		.name		= "biu",
+		.devname	= "dw_mmc.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.2",
+		.name		= "biu",
+		.devname	= "dw_mmc.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.3",
+		.name		= "biu",
+		.devname	= "dw_mmc.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
 	}, {
-		.name		= "dwmci",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
 		.name		= "sata",
 		.devname	= "ahci",
 		.enable		= exynos5_clk_ip_fsys_ctrl,
@@ -672,10 +724,6 @@
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
-		.name		= "gps",
-		.enable		= exynos5_clk_ip_gps_ctrl,
-		.ctrlbit	= ((1 << 3) | (1 << 2) | (1 << 0)),
-	}, {
 		.name		= "nfcon",
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 22),
@@ -764,6 +812,26 @@
 		.enable		= exynos5_clk_ip_peric_ctrl,
 		.ctrlbit	= (1 << 18),
 	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.0",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.1",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.2",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.3",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
 		.name		= SYSMMU_CLOCK_NAME,
 		.devname	= SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
 		.enable		= &exynos5_clk_ip_mfc_ctrl,
@@ -891,6 +959,13 @@
 	.ctrlbit	= (1 << 4),
 };
 
+static struct clk exynos5_clk_fimd1 = {
+	.name		= "fimd",
+	.devname	= "exynos5-fb.1",
+	.enable		= exynos5_clk_ip_disp1_ctrl,
+	.ctrlbit	= (1 << 0),
+};
+
 struct clk *exynos5_clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = NULL,
@@ -1015,8 +1090,8 @@
 
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.0",
+		.name		= "ciu",	/* card interface unit clock */
+		.devname	= "dw_mmc.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1026,8 +1101,8 @@
 
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.1",
+		.name		= "ciu",
+		.devname	= "dw_mmc.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1037,8 +1112,8 @@
 
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.2",
+		.name		= "ciu",
+		.devname	= "dw_mmc.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1048,8 +1123,8 @@
 
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.3",
+		.name		= "ciu",
+		.devname	= "dw_mmc.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1120,27 +1195,21 @@
 	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
 };
 
+struct clksrc_clk exynos5_clk_sclk_fimd1 = {
+	.clk	= {
+		.name		= "sclk_fimd",
+		.devname	= "exynos5-fb.1",
+		.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
+};
+
 static struct clksrc_clk exynos5_clksrcs[] = {
 	{
 		.clk	= {
-			.name		= "sclk_dwmci",
-			.parent		= &exynos5_clk_dout_mmc4.clk,
-			.enable		= exynos5_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimd",
-			.devname	= "s3cfb.1",
-			.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "aclk_266_gscl",
 		},
 		.sources = &clk_src_gscl_266,
@@ -1225,6 +1294,10 @@
 	&exynos5_clk_aclk_266,
 	&exynos5_clk_aclk_200,
 	&exynos5_clk_aclk_166,
+	&exynos5_clk_aclk_300_gscl,
+	&exynos5_clk_mout_aclk_300_gscl,
+	&exynos5_clk_mout_aclk_300_gscl_mid,
+	&exynos5_clk_mout_aclk_300_gscl_mid1,
 	&exynos5_clk_aclk_66_pre,
 	&exynos5_clk_aclk_66,
 	&exynos5_clk_dout_mmc0,
@@ -1240,12 +1313,14 @@
 	&exynos5_clk_mdout_spi0,
 	&exynos5_clk_mdout_spi1,
 	&exynos5_clk_mdout_spi2,
+	&exynos5_clk_sclk_fimd1,
 };
 
 static struct clk *exynos5_clk_cdev[] = {
 	&exynos5_clk_pdma0,
 	&exynos5_clk_pdma1,
 	&exynos5_clk_mdma1,
+	&exynos5_clk_fimd1,
 };
 
 static struct clksrc_clk *exynos5_clksrc_cdev[] = {
@@ -1274,6 +1349,7 @@
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
+	CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
 };
 
 static unsigned long exynos5_epll_get_rate(struct clk *clk)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/common.c linux-libre-3.7-gnu/arch/arm/mach-exynos/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -47,6 +47,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/tv-core.h>
+#include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 
 #include "common.h"
@@ -346,6 +347,8 @@
 
 	s5p_fb_setname(0, "exynos4-fb");
 	s5p_hdmi_setname("exynos4-hdmi");
+
+	s3c64xx_spi_setname("exynos4210-spi");
 }
 
 static void __init exynos5_map_io(void)
@@ -366,6 +369,8 @@
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 	s3c_i2c2_setname("s3c2440-i2c");
+
+	s3c64xx_spi_setname("exynos4210-spi");
 }
 
 static void __init exynos4_init_clocks(int xtal)
@@ -980,6 +985,32 @@
 {
 	int irq;
 
+#ifdef CONFIG_PINCTRL_SAMSUNG
+	/*
+	 * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
+	 * functionality along with support for external gpio and wakeup
+	 * interrupts. If the samsung pinctrl driver is enabled and includes
+	 * the wakeup interrupt support, then the setting up external wakeup
+	 * interrupts here can be skipped. This check here is temporary to
+	 * allow exynos4 platforms that do not use Samsung pinctrl driver to
+	 * co-exist with platforms that do. When all of the Samsung Exynos4
+	 * platforms switch over to using the pinctrl driver, the wakeup
+	 * interrupt support code here can be completely removed.
+	 */
+	struct device_node *pctrl_np, *wkup_np;
+	const char *pctrl_compat = "samsung,pinctrl-exynos4210";
+	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
+
+	for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+		if (of_device_is_available(pctrl_np)) {
+			wkup_np = of_find_compatible_node(pctrl_np, NULL,
+							wkup_compat);
+			if (wkup_np)
+				return -ENODEV;
+		}
+	}
+#endif
+
 	if (soc_is_exynos5250())
 		exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
 	else
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/common.h linux-libre-3.7-gnu/arch/arm/mach-exynos/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -14,6 +14,7 @@
 
 extern struct sys_timer exynos4_timer;
 
+struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
 void exynos4_init_irq(void);
 void exynos5_init_irq(void);
@@ -59,4 +60,8 @@
 #define exynos4212_register_clocks()
 #endif
 
+extern struct smp_operations exynos_smp_ops;
+
+extern void exynos_cpu_die(unsigned int cpu);
+
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/dev-audio.c linux-libre-3.7-gnu/arch/arm/mach-exynos/dev-audio.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/dev-audio.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/dev-audio.c	2012-12-10 22:30:57.000000000 -0500
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/dev-ohci.c linux-libre-3.7-gnu/arch/arm/mach-exynos/dev-ohci.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/dev-ohci.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/dev-ohci.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,7 +15,7 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <plat/devs.h>
 #include <plat/usb-phy.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/dma.c linux-libre-3.7-gnu/arch/arm/mach-exynos/dma.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/dma.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/dma.c	2012-12-10 22:30:57.000000000 -0500
@@ -275,6 +275,9 @@
 		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
 		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+		if (samsung_rev() == EXYNOS4210_REV_0)
+			exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);
@@ -303,10 +306,12 @@
 
 	dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_PRIVATE, exynos_pdma0_pdata.cap_mask);
 	amba_device_register(&exynos_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_PRIVATE, exynos_pdma1_pdata.cap_mask);
 	amba_device_register(&exynos_pdma1_device, &iomem_resource);
 
 	dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/hotplug.c linux-libre-3.7-gnu/arch/arm/mach-exynos/hotplug.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/hotplug.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/hotplug.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,7 +21,7 @@
 
 #include <mach/regs-pmu.h>
 
-extern volatile int pen_release;
+#include "common.h"
 
 static inline void cpu_enter_lowpower(void)
 {
@@ -95,17 +95,12 @@
 	}
 }
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref exynos_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
@@ -124,12 +119,3 @@
 	if (spurious)
 		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/include/mach/map.h linux-libre-3.7-gnu/arch/arm/mach-exynos/include/mach/map.h
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/include/mach/map.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/include/mach/map.h	2012-12-10 22:30:57.000000000 -0500
@@ -89,7 +89,8 @@
 #define EXYNOS4_PA_L2CC			0x10502000
 
 #define EXYNOS4_PA_MDMA0		0x10810000
-#define EXYNOS4_PA_MDMA1		0x12840000
+#define EXYNOS4_PA_MDMA1		0x12850000
+#define EXYNOS4_PA_S_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 #define EXYNOS5_PA_MDMA0		0x10800000
@@ -121,6 +122,11 @@
 #define EXYNOS4_PA_SYSMMU_MFC_L		0x13620000
 #define EXYNOS4_PA_SYSMMU_MFC_R		0x13630000
 
+#define EXYNOS5_PA_GSC0			0x13E00000
+#define EXYNOS5_PA_GSC1			0x13E10000
+#define EXYNOS5_PA_GSC2			0x13E20000
+#define EXYNOS5_PA_GSC3			0x13E30000
+
 #define EXYNOS5_PA_SYSMMU_MDMA1		0x10A40000
 #define EXYNOS5_PA_SYSMMU_SSS		0x10A50000
 #define EXYNOS5_PA_SYSMMU_2D		0x10A60000
@@ -131,7 +137,6 @@
 #define EXYNOS5_PA_SYSMMU_JPEG		0x11F20000
 #define EXYNOS5_PA_SYSMMU_IOP		0x12360000
 #define EXYNOS5_PA_SYSMMU_RTIC		0x12370000
-#define EXYNOS5_PA_SYSMMU_GPS		0x12630000
 #define EXYNOS5_PA_SYSMMU_ISP		0x13260000
 #define EXYNOS5_PA_SYSMMU_DRC		0x12370000
 #define EXYNOS5_PA_SYSMMU_SCALERC	0x13280000
@@ -173,6 +178,10 @@
 
 #define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 #define EXYNOS4_PA_DWMCI		0x12550000
+#define EXYNOS5_PA_DWMCI0		0x12200000
+#define EXYNOS5_PA_DWMCI1		0x12210000
+#define EXYNOS5_PA_DWMCI2		0x12220000
+#define EXYNOS5_PA_DWMCI3		0x12230000
 
 #define EXYNOS4_PA_HSOTG		0x12480000
 #define EXYNOS4_PA_USB_HSPHY		0x125B0000
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/include/mach/ohci.h linux-libre-3.7-gnu/arch/arm/mach-exynos/include/mach/ohci.h
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/include/mach/ohci.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/include/mach/ohci.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/include/mach/sysmmu.h linux-libre-3.7-gnu/arch/arm/mach-exynos/include/mach/sysmmu.h
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/include/mach/sysmmu.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/include/mach/sysmmu.h	2012-12-10 22:30:57.000000000 -0500
@@ -58,7 +58,7 @@
 #endif
 
 #else /* !CONFIG_EXYNOS_DEV_SYSMMU */
-#define platform_set_sysmmu(dev, sysmmu) do { } while (0)
+#define platform_set_sysmmu(sysmmu, dev) do { } while (0)
 #endif
 
 #define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/Kconfig linux-libre-3.7-gnu/arch/arm/mach-exynos/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -31,11 +31,11 @@
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
 	select ARM_CPU_SUSPEND if PM
+	select PM_GENERIC_DOMAINS
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
-	select PM_GENERIC_DOMAINS
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4210 CPU support
 
@@ -43,9 +43,9 @@
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4212 SoC support
 
@@ -61,9 +61,9 @@
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
-	select SAMSUNG_DMADEV
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS5250 SoC support
 
@@ -189,70 +189,71 @@
 config MACH_SMDKV310
 	bool "SMDKV310"
 	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
+	select EXYNOS4_DEV_AHCI
+	select EXYNOS4_DEV_USB_OHCI
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS_DEV_DRM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
-	select EXYNOS_DEV_DMA
 	select SAMSUNG_DEV_PWM
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV310
 
 config MACH_ARMLEX4210
 	bool "ARMLEX4210"
 	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
+	select EXYNOS4_DEV_AHCI
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS_DEV_DMA
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
-	select EXYNOS4_DEV_AHCI
-	select EXYNOS_DEV_DMA
-	select EXYNOS4_SETUP_SDHCI
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
 
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
-	select CPU_EXYNOS4210
-	select S5P_HRT
 	select CLKSRC_MMIO
+	select CPU_EXYNOS4210
+	select EXYNOS4_SETUP_FIMC
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
 	select HAVE_SCHED_CLOCK
-	select S5P_GPIO_INT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
-	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -260,21 +261,21 @@
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_USB_HSOTG
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_FIMC
+	select S5P_GPIO_INT
+	select S5P_HRT
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -282,10 +283,16 @@
 config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
-	select S5P_GPIO_INT
-	select S3C_DEV_WDT
-	select S3C_DEV_RTC
-	select S5P_DEV_FIMD0
+	select EXYNOS4_SETUP_FIMC
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_I2C6
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -293,41 +300,42 @@
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_I2C6
+	select S3C_DEV_RTC
 	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
 	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_G2D
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
+	select S5P_GPIO_INT
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMC
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_I2C6
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S5P_SETUP_MIPIPHY
-	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
 config MACH_ORIGEN
 	bool "ORIGEN"
 	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
+	select EXYNOS4_DEV_USB_OHCI
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_RTC
 	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -341,13 +349,6 @@
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
-	select EXYNOS_DEV_DRM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 
@@ -355,7 +356,17 @@
 
 config MACH_SMDK4212
 	bool "SMDK4212"
-	select SOC_EXYNOS4212
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C7
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
@@ -373,16 +384,7 @@
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C7
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
+	select SOC_EXYNOS4212
 	help
 	  Machine support for Samsung SMDK4212
 
@@ -390,8 +392,8 @@
 
 config MACH_SMDK4412
 	bool "SMDK4412"
-	select SOC_EXYNOS4412
 	select MACH_SMDK4212
+	select SOC_EXYNOS4412
 	help
 	  Machine support for Samsung SMDK4412
 endif
@@ -401,10 +403,12 @@
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
-	select CPU_EXYNOS4210
-	select USE_OF
 	select ARM_AMBA
+	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+	select PINCTRL
+	select PINCTRL_EXYNOS4
+	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
 	  Select this if a fdt blob is available for the Exynos4 SoC based board.
@@ -414,12 +418,12 @@
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
 	depends on ARCH_EXYNOS5
+	select ARM_AMBA
 	select SOC_EXYNOS5250
 	select USE_OF
-	select ARM_AMBA
 	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the EXYNOS4 SoC based board.
+	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
+	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
 
 if ARCH_EXYNOS4
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-armlex4210.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-armlex4210.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-armlex4210.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-armlex4210.c	2012-12-10 22:30:57.000000000 -0500
@@ -199,6 +199,7 @@
 MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
 	.handle_irq	= gic_handle_irq,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-exynos4-dt.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-exynos4-dt.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-exynos4-dt.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-exynos4-dt.c	2012-12-10 22:30:57.000000000 -0500
@@ -1,5 +1,5 @@
 /*
- * Samsung's Exynos4210 flattened device tree enabled machine
+ * Samsung's EXYNOS4 flattened device tree enabled machine
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -36,7 +36,7 @@
  * at some point, the drivers should be capable of parsing all the platform
  * data from the device tree.
  */
-static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
 				"exynos4210-uart.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
@@ -55,6 +55,20 @@
 				"exynos4-sdhci.3", NULL),
 	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
 				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
+				"s3c2440-i2c.1", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
+				"s3c2440-i2c.2", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
+				"s3c2440-i2c.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
+				"s3c2440-i2c.4", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
+				"s3c2440-i2c.5", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
+				"s3c2440-i2c.6", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
+				"s3c2440-i2c.7", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
 				"exynos4210-spi.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
@@ -66,31 +80,32 @@
 	{},
 };
 
-static void __init exynos4210_dt_map_io(void)
+static void __init exynos4_dt_map_io(void)
 {
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 }
 
-static void __init exynos4210_dt_machine_init(void)
+static void __init exynos4_dt_machine_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos4210_auxdata_lookup, NULL);
+				exynos4_auxdata_lookup, NULL);
 }
 
-static char const *exynos4210_dt_compat[] __initdata = {
+static char const *exynos4_dt_compat[] __initdata = {
 	"samsung,exynos4210",
 	NULL
 };
 
 DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
-	.map_io		= exynos4210_dt_map_io,
+	.map_io		= exynos4_dt_map_io,
 	.handle_irq	= gic_handle_irq,
-	.init_machine	= exynos4210_dt_machine_init,
+	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
-	.dt_compat	= exynos4210_dt_compat,
+	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-exynos5-dt.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-exynos5-dt.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-exynos5-dt.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-exynos5-dt.c	2012-12-10 22:30:57.000000000 -0500
@@ -47,6 +47,14 @@
 				"s3c2440-i2c.0", NULL),
 	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
 				"s3c2440-i2c.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
+				"dw_mmc.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
+				"dw_mmc.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
+				"dw_mmc.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
+				"dw_mmc.3", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
 				"exynos4210-spi.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
@@ -56,6 +64,14 @@
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
+				"exynos-gsc.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
+				"exynos-gsc.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
+				"exynos-gsc.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
+				"exynos-gsc.3", NULL),
 	{},
 };
 
@@ -79,6 +95,7 @@
 DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.init_irq	= exynos5_init_irq,
+	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos5250_dt_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos5250_dt_machine_init,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-nuri.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-nuri.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-nuri.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-nuri.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,6 +29,7 @@
 #include <drm/exynos_drm.h>
 
 #include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
 #include <media/m5mols.h>
 #include <media/s5k6aa.h>
 #include <media/s5p_fimc.h>
@@ -39,20 +40,19 @@
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
-#include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/mfc.h>
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
@@ -378,10 +378,10 @@
 };
 static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
 	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
 	REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
@@ -1180,9 +1180,7 @@
 static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 	.clk_rate	= 166000000UL,
 	.lanes		= 2,
-	.alignment	= 32,
 	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
 };
 
 #define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
@@ -1226,7 +1224,6 @@
 		.bus_type	= FIMC_MIPI_CSI2,
 		.board_info	= &m5mols_board_info,
 		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
 	},
 };
 
@@ -1383,6 +1380,7 @@
 MACHINE_START(NURI, "NURI")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
 	.handle_irq	= gic_handle_irq,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-origen.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-origen.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-origen.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-origen.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/input.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
@@ -29,14 +30,14 @@
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
 
 #include <plat/regs-serial.h>
-#include <plat/regs-fb-v4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
@@ -44,7 +45,7 @@
 #include <plat/mfc.h>
 #include <plat/hdmi.h>
 
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>
@@ -96,12 +97,12 @@
 };
 
 static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
 };
 static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
 	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
@@ -614,6 +615,10 @@
 	.dev.platform_data	= &origen_lcd_hv070wsa_data,
 };
 
+static struct pwm_lookup origen_pwm_lookup[] = {
+	PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
+};
+
 #ifdef CONFIG_DRM_EXYNOS
 static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
 	.panel	= {
@@ -798,6 +803,7 @@
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
+	pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 
 	origen_bt_setup();
@@ -806,6 +812,7 @@
 MACHINE_START(ORIGEN, "ORIGEN")
 	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
 	.handle_irq	= gic_handle_irq,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-smdk4x12.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-smdk4x12.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-smdk4x12.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-smdk4x12.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,7 @@
 #include <linux/mfd/max8997.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
@@ -26,16 +27,16 @@
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
+#include <video/samsung_fimd.h>
 #include <plat/backlight.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
-#include <plat/regs-fb.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
@@ -222,6 +223,10 @@
 	.pwm_period_ns  = 1000,
 };
 
+static struct pwm_lookup smdk4x12_pwm_lookup[] = {
+	PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
+};
+
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
 	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
@@ -349,6 +354,7 @@
 				ARRAY_SIZE(smdk4x12_i2c_devs7));
 
 	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+	pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup));
 
 	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
 
@@ -370,6 +376,7 @@
 MACHINE_START(SMDK4212, "SMDK4212")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
 	.handle_irq	= gic_handle_irq,
@@ -383,6 +390,7 @@
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
 	.handle_irq	= gic_handle_irq,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-smdkv310.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-smdkv310.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-smdkv310.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-smdkv310.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
@@ -26,24 +27,24 @@
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/hdmi.h>
 
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <drm/exynos_drm.h>
 #include "common.h"
@@ -360,6 +361,10 @@
 	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
 };
 
+static struct pwm_lookup smdkv310_pwm_lookup[] = {
+	PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
@@ -399,6 +404,8 @@
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+	pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));
+
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
 	exynos4_fimd0_gpio_setup_24bpp();
@@ -417,6 +424,7 @@
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.handle_irq	= gic_handle_irq,
@@ -429,6 +437,7 @@
 MACHINE_START(SMDKC210, "SMDKC210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.handle_irq	= gic_handle_irq,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-universal_c210.c linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-universal_c210.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/mach-universal_c210.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/mach-universal_c210.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,20 +30,20 @@
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
+#include <video/samsung_fimd.h>
 #include <plat/regs-serial.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
-#include <plat/regs-fb-v4.h>
 #include <plat/fimc-core.h>
 #include <plat/s5p-time.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
@@ -209,7 +209,7 @@
 	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
 };
 
 static struct regulator_init_data lp3974_ldo3_data = {
@@ -273,7 +273,7 @@
 };
 
 static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
 };
 
 static struct regulator_init_data lp3974_ldo7_data = {
@@ -942,9 +942,7 @@
 static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 	.clk_rate	= 166000000UL,
 	.lanes		= 2,
-	.alignment	= 32,
 	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
 };
 
 #define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
@@ -1008,7 +1006,6 @@
 		.board_info	= &m5mols_board_info,
 		.i2c_bus_num	= 0,
 		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
 	},
 };
 
@@ -1155,6 +1152,7 @@
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-exynos/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/Makefile.boot	2012-12-10 22:30:57.000000000 -0500
@@ -1,5 +1,2 @@
    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
-
-dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
-dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/platsmp.c linux-libre-3.7-gnu/arch/arm/mach-exynos/platsmp.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/platsmp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/platsmp.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,19 +32,14 @@
 
 #include <plat/cpu.h>
 
+#include "common.h"
+
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
 				S5P_INFORM5 : S5P_VA_SYSRAM)
 
 /*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
-/*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
@@ -64,7 +59,7 @@
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit exynos_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -86,7 +81,7 @@
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
@@ -139,7 +134,7 @@
 
 		__raw_writel(virt_to_phys(exynos4_secondary_startup),
 			CPU1_BOOT_REG);
-		gic_raise_softirq(cpumask_of(cpu), 1);
+		gic_raise_softirq(cpumask_of(cpu), 0);
 
 		if (pen_release == -1)
 			break;
@@ -161,7 +156,7 @@
  * which may be present or become present in the system.
  */
 
-void __init smp_init_cpus(void)
+static void __init exynos_smp_init_cpus(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
@@ -184,7 +179,7 @@
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
 	if (!soc_is_exynos5250())
 		scu_enable(scu_base_addr());
@@ -198,3 +193,13 @@
 	__raw_writel(virt_to_phys(exynos4_secondary_startup),
 			CPU1_BOOT_REG);
 }
+
+struct smp_operations exynos_smp_ops __initdata = {
+	.smp_init_cpus		= exynos_smp_init_cpus,
+	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
+	.smp_secondary_init	= exynos_secondary_init,
+	.smp_boot_secondary	= exynos_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= exynos_cpu_die,
+#endif
+};
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-fimd0.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-fimd0.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-fimd0.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-fimd0.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,8 +13,8 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 
+#include <video/samsung_fimd.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-fb-v4.h>
 
 #include <mach/map.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c0.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c0.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c0.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c0.c	2012-12-10 22:30:57.000000000 -0500
@@ -14,7 +14,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/cpu.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c1.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c1.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c1.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c1.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c2.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c2.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c2.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c2.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c3.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c3.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c3.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c3.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c3_cfg_gpio(struct platform_device *dev)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c4.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c4.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c4.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c4.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c4_cfg_gpio(struct platform_device *dev)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c5.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c5.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c5.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c5.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c5_cfg_gpio(struct platform_device *dev)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c6.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c6.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c6.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c6.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c6_cfg_gpio(struct platform_device *dev)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c7.c linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c7.c
--- linux-libre-3.6-gnu/arch/arm/mach-exynos/setup-i2c7.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-exynos/setup-i2c7.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c7_cfg_gpio(struct platform_device *dev)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/common.c linux-libre-3.7-gnu/arch/arm/mach-footbridge/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
- 
+
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/irq.h>
@@ -26,6 +26,7 @@
 
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
+#include <asm/mach/pci.h>
 
 #include "common.h"
 
@@ -175,11 +176,6 @@
 		.pfn		= __phys_to_pfn(DC21285_PCI_IACK),
 		.length		= PCIIACK_SIZE,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PCIO_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
-		.length		= PCIO_SIZE,
-		.type		= MT_DEVICE,
 	},
 #endif
 };
@@ -196,8 +192,10 @@
 	 * Now, work out what we've got to map in addition on this
 	 * platform.
 	 */
-	if (footbridge_cfn_mode())
+	if (footbridge_cfn_mode()) {
 		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
+	}
 }
 
 void footbridge_restart(char mode, const char *cmd)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/dc21285.c linux-libre-3.7-gnu/arch/arm/mach-footbridge/dc21285.c
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/dc21285.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/dc21285.c	2012-12-10 22:30:57.000000000 -0500
@@ -276,8 +276,8 @@
 
 	sys->mem_offset  = DC21285_PCI_MEM;
 
-	pci_add_resource_offset(&sys->resources,
-				&ioport_resource, sys->io_offset);
+	pci_ioremap_io(0, DC21285_PCI_IO);
+
 	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
@@ -298,7 +298,7 @@
 	mem_size = (unsigned int)high_memory - PAGE_OFFSET;
 	for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
 		if (mem_mask >= mem_size)
-			break;		
+			break;
 
 	/*
 	 * These registers need to be set up whether we're the
@@ -350,14 +350,6 @@
 			    "PCI data parity", NULL);
 
 	if (cfn_mode) {
-		static struct resource csrio;
-
-		csrio.flags  = IORESOURCE_IO;
-		csrio.name   = "Footbridge";
-
-		allocate_resource(&ioport_resource, &csrio, 128,
-				  0xff00, 0xffff, 128, NULL, NULL);
-
 		/*
 		 * Map our SDRAM at a known address in PCI space, just in case
 		 * the firmware had other ideas.  Using a nonzero base is
@@ -365,7 +357,7 @@
 		 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
 		 */
 		*CSR_PCICSRBASE       = 0xf4000000;
-		*CSR_PCICSRIOBASE     = csrio.start;
+		*CSR_PCICSRIOBASE     = 0;
 		*CSR_PCISDRAMBASE     = __virt_to_bus(PAGE_OFFSET);
 		*CSR_PCIROMBASE       = 0;
 		*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/ebsa285.c linux-libre-3.7-gnu/arch/arm/mach-footbridge/ebsa285.c
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/ebsa285.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/ebsa285.c	2012-12-10 22:30:57.000000000 -0500
@@ -5,6 +5,8 @@
  */
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>
@@ -13,6 +15,85 @@
 
 #include "common.h"
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct ebsa285_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} ebsa285_leds[] = {
+	{ "ebsa285:amber", "heartbeat", },
+	{ "ebsa285:green", "cpu0", },
+	{ "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct ebsa285_led *led = container_of(cdev,
+			struct ebsa285_led, cdev);
+
+	if (b != LED_OFF)
+		*XBUS_LEDS |= led->mask;
+	else
+		*XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+	struct ebsa285_led *led = container_of(cdev,
+			struct ebsa285_led, cdev);
+
+	return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+	int i;
+
+	if (machine_is_ebsa285())
+		return -ENODEV;
+
+	/* 3 LEDS All ON */
+	*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+	for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+		struct ebsa285_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = ebsa285_leds[i].name;
+		led->cdev.brightness_set = ebsa285_led_set;
+		led->cdev.brightness_get = ebsa285_led_get;
+		led->cdev.default_trigger = ebsa285_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+#endif
+
 MACHINE_START(EBSA285, "EBSA285")
 	/* Maintainer: Russell King */
 	.atag_offset	= 0x100,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/ebsa285-leds.c linux-libre-3.7-gnu/arch/arm/mach-footbridge/ebsa285-leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/ebsa285-leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/ebsa285-leds.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Amber - On if system is not idle
- *  - Red   - currently unused
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
-		hw_led_state |= XBUS_LED_AMBER;
-#endif
-		led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= XBUS_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_RED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		*XBUS_LEDS = hw_led_state;
-
-	spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_ebsa285())
-		leds_event = ebsa285_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/include/mach/debug-macro.S linux-libre-3.7-gnu/arch/arm/mach-footbridge/include/mach/debug-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/include/mach/debug-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/include/mach/debug-macro.S	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,8 @@
 	/* For NetWinder debugging */
 		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x000003f8
-		orr	\rv, \rp, #0xff000000	@ virtual
+		orr	\rv, \rp, #0xfe000000	@ virtual
+		orr	\rv, \rv, #0x00e00000	@ virtual
 		orr	\rp, \rp, #0x7c000000	@ physical
 		.endm
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-footbridge/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/include/mach/io.h	2012-12-10 22:30:57.000000000 -0500
@@ -14,18 +14,10 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
-#define PCIO_SIZE       0x00100000
-#define PCIO_BASE       MMU_IO(0xff000000, 0x7c000000)
-
 /*
- * Translation of various region addresses to virtual addresses
+ * Translation of various i/o addresses to host addresses for !CONFIG_MMU
  */
+#define PCIO_BASE       0x7c000000
 #define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/include/mach/irqs.h linux-libre-3.7-gnu/arch/arm/mach-footbridge/include/mach/irqs.h
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/include/mach/irqs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/include/mach/irqs.h	2012-12-10 22:30:57.000000000 -0500
@@ -89,8 +89,6 @@
 #define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
 #define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
 
-#undef RTC_IRQ
-#define RTC_IRQ		IRQ_ISA_RTC_ALARM
 #define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
 #define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
 #define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/Kconfig linux-libre-3.7-gnu/arch/arm/mach-footbridge/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -91,7 +91,7 @@
 
 # EBSA285 board in either host or addin mode
 config ARCH_EBSA285
-	select ARCH_MAY_HAVE_PC_FDC
 	bool
+	select ARCH_MAY_HAVE_PC_FDC
 
 endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/Makefile linux-libre-3.7-gnu/arch/arm/mach-footbridge/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -14,15 +14,11 @@
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
 
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
 obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
 
 obj-$(CONFIG_PCI)	+=$(pci-y)
-obj-$(CONFIG_LEDS)	+=$(leds-y)
 
 obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/netwinder-hw.c linux-libre-3.7-gnu/arch/arm/mach-footbridge/netwinder-hw.c
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/netwinder-hw.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/netwinder-hw.c	2012-12-10 22:30:57.000000000 -0500
@@ -12,9 +12,10 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/system_misc.h>
@@ -27,13 +28,6 @@
 #define GP1_IO_BASE		0x338
 #define GP2_IO_BASE		0x33a
 
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS	0
-#else
-#define DEFAULT_LEDS	GPIO_GREEN_LED
-#endif
-
 /*
  * Winbond WB83977F accessibility stuff
  */
@@ -611,15 +605,9 @@
 static int __init nw_hw_init(void)
 {
 	if (machine_is_netwinder()) {
-		unsigned long flags;
-
 		wb977_init();
 		cpld_init();
 		rwa010_init();
-
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 	}
 	return 0;
 }
@@ -672,6 +660,102 @@
 	}
 }
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct netwinder_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} netwinder_leds[] = {
+	{ "netwinder:green", "heartbeat", },
+	{ "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ *  - setting bit means turn off LED
+ *  - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct netwinder_led *led = container_of(cdev,
+			struct netwinder_led, cdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	reg = nw_gpio_read();
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+	nw_gpio_modify_op(led->mask, reg);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+	struct netwinder_led *led = container_of(cdev,
+			struct netwinder_led, cdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	reg = nw_gpio_read();
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+	return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_netwinder())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+		struct netwinder_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = netwinder_leds[i].name;
+		led->cdev.brightness_set = netwinder_led_set;
+		led->cdev.brightness_get = netwinder_led_get;
+		led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+		if (i == 0)
+			led->mask = GPIO_GREEN_LED;
+		else
+			led->mask = GPIO_RED_LED;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+#endif
+
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
 	.atag_offset	= 0x100,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-footbridge/netwinder-leds.c linux-libre-3.7-gnu/arch/arm/mach-footbridge/netwinder-leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-footbridge/netwinder-leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-footbridge/netwinder-leds.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Red   - On if the system is not idle
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_RAW_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = GPIO_GREEN_LED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= GPIO_GREEN_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_GREEN_LED;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&leds_lock, flags);
-
-	if  (led_state & LED_STATE_ENABLED) {
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-	}
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_netwinder())
-		leds_event = netwinder_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-h720x/Kconfig linux-libre-3.7-gnu/arch/arm/mach-h720x/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-h720x/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-h720x/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -12,9 +12,9 @@
 
 config ARCH_H7202
 	bool "hms30c7202"
+	depends on ARCH_H720X
 	select CPU_H7202
 	select ZONE_DMA
-	depends on ARCH_H720X
 	help
 	  Say Y here if you are using the Hynix HMS30C7202 Reference Board
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/core.h linux-libre-3.7-gnu/arch/arm/mach-highbank/core.h
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/core.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/core.h	2012-12-10 22:30:57.000000000 -0500
@@ -8,4 +8,13 @@
 static inline void highbank_lluart_map_io(void) {}
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+extern void highbank_pm_init(void);
+#else
+static inline void highbank_pm_init(void) {}
+#endif
+
 extern void highbank_smc1(int fn, int arg);
+extern void highbank_cpu_die(unsigned int cpu);
+
+extern struct smp_operations highbank_smp_ops;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/highbank.c linux-libre-3.7-gnu/arch/arm/mach-highbank/highbank.c
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/highbank.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/highbank.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,6 +15,7 @@
  */
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
@@ -23,6 +24,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
+#include <linux/amba/bus.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -149,9 +151,60 @@
 		cpu_do_idle();
 }
 
+static int highbank_platform_notifier(struct notifier_block *nb,
+				  unsigned long event, void *__dev)
+{
+	struct resource *res;
+	int reg = -1;
+	struct device *dev = __dev;
+
+	if (event != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+
+	if (of_device_is_compatible(dev->of_node, "calxeda,hb-ahci"))
+		reg = 0xc;
+	else if (of_device_is_compatible(dev->of_node, "calxeda,hb-sdhci"))
+		reg = 0x18;
+	else if (of_device_is_compatible(dev->of_node, "arm,pl330"))
+		reg = 0x20;
+	else if (of_device_is_compatible(dev->of_node, "calxeda,hb-xgmac")) {
+		res = platform_get_resource(to_platform_device(dev),
+					    IORESOURCE_MEM, 0);
+		if (res) {
+			if (res->start == 0xfff50000)
+				reg = 0;
+			else if (res->start == 0xfff51000)
+				reg = 4;
+		}
+	}
+
+	if (reg < 0)
+		return NOTIFY_DONE;
+
+	if (of_property_read_bool(dev->of_node, "dma-coherent")) {
+		writel(0xff31, sregs_base + reg);
+		set_dma_ops(dev, &arm_coherent_dma_ops);
+	} else
+		writel(0, sregs_base + reg);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block highbank_amba_nb = {
+	.notifier_call = highbank_platform_notifier,
+};
+
+static struct notifier_block highbank_platform_nb = {
+	.notifier_call = highbank_platform_notifier,
+};
+
 static void __init highbank_init(void)
 {
 	pm_power_off = highbank_power_off;
+	highbank_pm_init();
+
+	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
+	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
@@ -162,6 +215,7 @@
 };
 
 DT_MACHINE_START(HIGHBANK, "Highbank")
+	.smp		= smp_ops(highbank_smp_ops),
 	.map_io		= highbank_map_io,
 	.init_irq	= highbank_init_irq,
 	.timer		= &highbank_timer,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/hotplug.c linux-libre-3.7-gnu/arch/arm/mach-highbank/hotplug.c
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/hotplug.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/hotplug.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,16 +24,11 @@
 
 extern void secondary_startup(void);
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref highbank_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
@@ -45,12 +40,3 @@
 	/* We should never return from idle */
 	panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * CPU0 should not be shut down via hotplug.  cpu_idle can WFI
-	 * or a proper shutdown or hibernate should be used.
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/debug-macro.S linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/debug-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/debug-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart,rp,rv,tmp
-		movw	\rv, #0x6000
-		movt	\rv, #0xfee3
-		movw	\rp, #0x6000
-		movt	\rp, #0xfff3
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-/* empty */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/timex.h linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/timex.h
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/timex.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,6 +0,0 @@
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/uncompress.h linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/uncompress.h
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/include/mach/uncompress.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,9 +0,0 @@
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/Kconfig linux-libre-3.7-gnu/arch/arm/mach-highbank/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/Kconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,15 @@
+config ARCH_HIGHBANK
+	bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select CACHE_L2X0
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU
+	select HAVE_SMP
+	select SPARSE_IRQ
+	select USE_OF
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-highbank/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-zreladdr-y	:= 0x00008000
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/platsmp.c linux-libre-3.7-gnu/arch/arm/mach-highbank/platsmp.c
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/platsmp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/platsmp.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,12 +25,12 @@
 
 extern void secondary_startup(void);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit highbank_secondary_init(unsigned int cpu)
 {
 	gic_secondary_init(0);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	gic_raise_softirq(cpumask_of(cpu), 0);
 	return 0;
@@ -40,7 +40,7 @@
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init highbank_smp_init_cpus(void)
 {
 	unsigned int i, ncores;
 
@@ -61,7 +61,7 @@
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
@@ -76,3 +76,13 @@
 	for (i = 1; i < max_cpus; i++)
 		highbank_set_cpu_jump(i, secondary_startup);
 }
+
+struct smp_operations highbank_smp_ops __initdata = {
+	.smp_init_cpus		= highbank_smp_init_cpus,
+	.smp_prepare_cpus	= highbank_smp_prepare_cpus,
+	.smp_secondary_init	= highbank_secondary_init,
+	.smp_boot_secondary	= highbank_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= highbank_cpu_die,
+#endif
+};
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/pm.c linux-libre-3.7-gnu/arch/arm/mach-highbank/pm.c
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/pm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/pm.c	2012-12-10 22:30:57.000000000 -0500
@@ -47,9 +47,7 @@
 	.valid = suspend_valid_only_mem,
 };
 
-static int __init highbank_pm_init(void)
+void __init highbank_pm_init(void)
 {
 	suspend_set_ops(&highbank_pm_ops);
-	return 0;
 }
-module_init(highbank_pm_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-highbank/system.c linux-libre-3.7-gnu/arch/arm/mach-highbank/system.c
--- linux-libre-3.6-gnu/arch/arm/mach-highbank/system.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-highbank/system.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,6 +28,7 @@
 		hignbank_set_pwr_soft_reset();
 
 	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-	cpu_do_idle();
+	while (1)
+		cpu_do_idle();
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-busy.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-busy.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-busy.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-busy.c	2012-12-10 22:30:57.000000000 -0500
@@ -108,7 +108,7 @@
 	busy->div.hw.init = &init;
 
 	clk = clk_register(NULL, &busy->div.hw);
-	if (!clk)
+	if (IS_ERR(clk))
 		kfree(busy);
 
 	return clk;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,3 @@
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(imx_ccm_lock);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-gate2.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-gate2.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-gate2.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-gate2.c	2012-12-10 22:30:57.000000000 -0500
@@ -112,7 +112,7 @@
 
 	clk = clk_register(dev, &gate->hw);
 	if (IS_ERR(clk))
-		kfree(clk);
+		kfree(gate);
 
 	return clk;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk.h linux-libre-3.7-gnu/arch/arm/mach-imx/clk.h
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk.h	2012-12-10 22:30:57.000000000 -0500
@@ -3,7 +3,8 @@
 
 #include <linux/spinlock.h>
 #include <linux/clk-provider.h>
-#include <mach/clock.h>
+
+extern spinlock_t imx_ccm_lock;
 
 struct clk *imx_clk_pllv1(const char *name, const char *parent,
 		void __iomem *base);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx21.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx21.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx21.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx21.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,7 +23,6 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/clkdev.h>
 #include <linux/err.h>
 
 #include <mach/hardware.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx25.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx25.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx25.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx25.c	2012-12-10 22:30:57.000000000 -0500
@@ -127,8 +127,8 @@
 	clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0),  4);
 	clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0),  5);
 	clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0),  6);
-	clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0),  7);
-	clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0),  8);
+	clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0),  7);
+	clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0),  8);
 	clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
 	clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
 	clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx27.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx27.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx27.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx27.c	2012-12-10 22:30:57.000000000 -0500
@@ -109,7 +109,7 @@
 	clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
 	clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
 	clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
-	clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+	clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
 	clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
 	clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
 	clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
@@ -121,7 +121,7 @@
 	clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
 	clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
 	clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
-	clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+	clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
 	clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
 	clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
 	clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
@@ -239,8 +239,8 @@
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
-	clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu");
-	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu");
+	clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
+	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
 	clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
 	clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
 	clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx35.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx35.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx35.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx35.c	2012-12-10 22:30:57.000000000 -0500
@@ -62,8 +62,8 @@
 	kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
 	rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
 	ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
-	wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
-	clk_max
+	wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate,
+	gpu2d_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -142,6 +142,9 @@
 
 	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
 
+	clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6);
+
 	clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0,  0);
 	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0,  2);
 	clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0,  4);
@@ -192,7 +195,7 @@
 	clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
 	clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
 
-	clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3,  0);
+	clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3,  0);
 	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3,  2);
 	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3,  4);
 
@@ -228,6 +231,7 @@
 	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
 	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
 	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
@@ -253,6 +257,7 @@
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 
 	clk_prepare_enable(clk[spba_gate]);
 	clk_prepare_enable(clk[gpio1_gate]);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx51-imx53.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx51-imx53.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx51-imx53.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx51-imx53.c	2012-12-10 22:30:57.000000000 -0500
@@ -39,16 +39,17 @@
 static const char *emi_slow_sel[] = { "main_bus", "ahb", };
 static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
 static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
-static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
 static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
 static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
-static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
 static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
 static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
 static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
 static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
 static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
 static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
 
 enum imx5_clks {
 	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
@@ -82,6 +83,7 @@
 	ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
 	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
 	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
+	can_sel, can1_serial_gate, can1_ipg_gate,
 	clk_max
 };
 
@@ -367,6 +369,7 @@
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi");
+	clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand");
 
 	/* set the usboh3 parent to pll2_sw */
 	clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
@@ -421,8 +424,12 @@
 	clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
 	clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
 	clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
-	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6);
-	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8);
+	clk[can_sel] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2,
+				mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
+	clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
+	clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
+	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
@@ -455,6 +462,11 @@
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+	clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand");
+	clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can");
+	clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can");
+	clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can");
+	clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can");
 
 	/* set SDHC root clock to 200MHZ*/
 	clk_set_rate(clk[esdhc_a_podf], 200000000);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx6q.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx6q.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-imx6q.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-imx6q.c	2012-12-10 22:30:57.000000000 -0500
@@ -157,6 +157,7 @@
 };
 
 static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
 
 static enum mx6q_clks const clks_init_on[] __initconst = {
 	mmdc_ch0_axi, rom,
@@ -394,52 +395,24 @@
 			pr_err("i.MX6q clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[twd], NULL, "smp_twd");
-	clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
-	clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
-	clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
-	clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
-	clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
-	clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
-	clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
-	clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
-	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
-	clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
-	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
-	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
-	clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
-	clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
-	clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
-	clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
-	clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
-	clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
-	clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
-	clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
-	clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
-	clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
-	clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
-	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
-	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
-	clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 
+	/*
+	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
+	 * We can not get the 100MHz from the pll2_pfd0_352m.
+	 * So choose pll2_pfd2_396m as enfc_sel's parent.
+	 */
+	clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/clk-pllv1.c linux-libre-3.7-gnu/arch/arm/mach-imx/clk-pllv1.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/clk-pllv1.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/clk-pllv1.c	2012-12-10 22:30:57.000000000 -0500
@@ -6,7 +6,7 @@
 #include <linux/err.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/clock.h>
+
 #include "clk.h"
 
 /**
@@ -29,8 +29,53 @@
 		unsigned long parent_rate)
 {
 	struct clk_pllv1 *pll = to_clk_pllv1(hw);
+	long long ll;
+	int mfn_abs;
+	unsigned int mfi, mfn, mfd, pd;
+	u32 reg;
+	unsigned long rate;
 
-	return mxc_decode_pll(readl(pll->base), parent_rate);
+	reg = readl(pll->base);
+
+	/*
+	 * Get the resulting clock rate from a PLL register value and the input
+	 * frequency. PLLs with this register layout can be found on i.MX1,
+	 * i.MX21, i.MX27 and i,MX31
+	 *
+	 *                  mfi + mfn / (mfd + 1)
+	 *  f = 2 * f_ref * --------------------
+	 *                        pd + 1
+	 */
+
+	mfi = (reg >> 10) & 0xf;
+	mfn = reg & 0x3ff;
+	mfd = (reg >> 16) & 0x3ff;
+	pd =  (reg >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	mfn_abs = mfn;
+
+	/*
+	 * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+	 * 2's complements number
+	 */
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		mfn_abs = 0x400 - mfn;
+
+	rate = parent_rate * 2;
+	rate /= pd + 1;
+
+	ll = (unsigned long long)rate * mfn_abs;
+
+	do_div(ll, mfd + 1);
+
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		ll = -ll;
+
+	ll = (rate * mfi) + ll;
+
+	return ll;
 }
 
 struct clk_ops clk_pllv1_ops = {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/devices-imx27.h linux-libre-3.7-gnu/arch/arm/mach-imx/devices-imx27.h
--- linux-libre-3.6-gnu/arch/arm/mach-imx/devices-imx27.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/devices-imx27.h	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,10 @@
 #define imx27_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
 
+extern const struct imx_imx27_coda_data imx27_coda_data;
+#define imx27_add_coda()	\
+	imx_add_imx27_coda(&imx27_coda_data)
+
 extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
 #define imx27_add_imx2_wdt()	\
 	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/devices-imx53.h linux-libre-3.7-gnu/arch/arm/mach-imx/devices-imx53.h
--- linux-libre-3.6-gnu/arch/arm/mach-imx/devices-imx53.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/devices-imx53.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata)   \
-	imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id)	\
-	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
-	imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/efika.h linux-libre-3.7-gnu/arch/arm/mach-imx/efika.h
--- linux-libre-3.6-gnu/arch/arm/mach-imx/efika.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/efika.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN		IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET	IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET	IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx25.c linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx25.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx25.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx25.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
@@ -30,7 +30,7 @@
 #define MX25_H1_SIC_SHIFT	21
 #define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
 #define MX25_H1_PP_BIT		(1 << 18)
-#define MX25_H1_PM_BIT		(1 << 8)
+#define MX25_H1_PM_BIT		(1 << 16)
 #define MX25_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX25_H1_TLL_BIT		(1 << 5)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx27.c linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx27.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx27.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx27.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx31.c linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx31.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx31.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx31.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx35.c linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx35.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx35.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx35.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
@@ -30,7 +30,7 @@
 #define MX35_H1_SIC_SHIFT	21
 #define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
 #define MX35_H1_PP_BIT		(1 << 18)
-#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_PM_BIT		(1 << 16)
 #define MX35_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX35_H1_TLL_BIT		(1 << 5)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx5.c linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx5.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/ehci-imx5.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/ehci-imx5.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define MXC_OTG_OFFSET			0
 #define MXC_H1_OFFSET			0x200
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c	2012-12-10 22:30:57.000000000 -0500
@@ -348,4 +348,5 @@
 	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
 
 	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c	2012-12-10 22:30:57.000000000 -0500
@@ -306,4 +306,5 @@
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c	2012-12-10 22:30:57.000000000 -0500
@@ -315,4 +315,5 @@
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c	2012-12-10 22:30:57.000000000 -0500
@@ -228,4 +228,5 @@
 
 	gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/hotplug.c linux-libre-3.7-gnu/arch/arm/mach-imx/hotplug.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/hotplug.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/hotplug.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,11 +15,6 @@
 #include <asm/cp15.h>
 #include <mach/common.h>
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -47,7 +42,7 @@
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
@@ -56,12 +51,3 @@
 	while (1)
 		;
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/imx51-dt.c linux-libre-3.7-gnu/arch/arm/mach-imx/imx51-dt.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/imx51-dt.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/imx51-dt.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -44,27 +43,8 @@
 	{ /* sentinel */ }
 };
 
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
-	{ /* sentinel */ }
-};
-
 static void __init imx51_dt_init(void)
 {
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	pinctrl_provide_dummies();
-
-	node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx51_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     imx51_auxdata_lookup, NULL);
 }
@@ -79,7 +59,6 @@
 };
 
 static const char *imx51_dt_board_compat[] __initdata = {
-	"fsl,imx51-babbage",
 	"fsl,imx51",
 	NULL
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/imx53-dt.c linux-libre-3.7-gnu/arch/arm/mach-imx/imx53-dt.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/imx53-dt.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/imx53-dt.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,126 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx53.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
-	{ /* sentinel */ }
-};
-
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
-	{ /* sentinel */ }
-};
-
-static void __init imx53_qsb_init(void)
-{
-	struct clk *clk;
-
-	clk = clk_get_sys(NULL, "ssi_ext1");
-	if (IS_ERR(clk)) {
-		pr_err("failed to get clk ssi_ext1\n");
-		return;
-	}
-
-	clk_register_clkdev(clk, NULL, "0-000a");
-}
-
-static void __init imx53_dt_init(void)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	pinctrl_provide_dummies();
-
-	node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx53_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
-	if (of_machine_is_compatible("fsl,imx53-qsb"))
-		imx53_qsb_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     imx53_auxdata_lookup, NULL);
-}
-
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
-	.init = imx53_timer_init,
-};
-
-static const char *imx53_dt_board_compat[] __initdata = {
-	"fsl,imx53-ard",
-	"fsl,imx53-evk",
-	"fsl,imx53-qsb",
-	"fsl,imx53-smd",
-	"fsl,imx53",
-	NULL
-};
-
-DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
-	.map_io		= mx53_map_io,
-	.init_early	= imx53_init_early,
-	.init_irq	= mx53_init_irq,
-	.handle_irq	= imx53_handle_irq,
-	.timer		= &imx53_timer,
-	.init_machine	= imx53_dt_init,
-	.init_late	= imx53_init_late,
-	.dt_compat	= imx53_dt_board_compat,
-	.restart	= mxc_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/Kconfig linux-libre-3.7-gnu/arch/arm/mach-imx/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-imx/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -41,73 +41,68 @@
 
 config SOC_IMX21
 	bool
-	select MACH_MX21
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
+	select MACH_MX21
 	select MXC_AVIC
 
 config SOC_IMX25
 	bool
 	select ARCH_MX25
+	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_ARM926T
 	select HAVE_CAN_FLEXCAN if CAN
-	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
 
 config SOC_IMX27
 	bool
-	select MACH_MX27
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
+	select MACH_MX27
 	select MXC_AVIC
 
 config SOC_IMX31
 	bool
+	select COMMON_CLK
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
-	select COMMON_CLK
 	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
-	select CPU_V6K
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
+	select CPU_V6K
+	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
-	select HAVE_CAN_FLEXCAN if CAN
 
 config SOC_IMX5
-	select CPU_V7
-	select MXC_TZIC
-	select COMMON_CLK
-	select ARCH_MXC_IOMUX_V3
+	bool
 	select ARCH_HAS_CPUFREQ
 	select ARCH_MX5
-	bool
+	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
+	select CPU_V7
+	select MXC_TZIC
 
 config SOC_IMX50
 	bool
-	select SOC_IMX5
 	select ARCH_MX50
+	select SOC_IMX5
 
 config	SOC_IMX51
 	bool
-	select SOC_IMX5
 	select ARCH_MX5
 	select ARCH_MX51
-
-config	SOC_IMX53
-	bool
+	select PINCTRL
+	select PINCTRL_IMX51
 	select SOC_IMX5
-	select ARCH_MX5
-	select ARCH_MX53
-	select HAVE_CAN_FLEXCAN if CAN
 
 if ARCH_IMX_V4_V5
 
@@ -117,10 +112,10 @@
 
 config ARCH_MX1ADS
 	bool "MX1ADS platform"
-	select MACH_MXLADS
-	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select MACH_MXLADS
+	select SOC_IMX1
 	help
 	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
@@ -132,9 +127,9 @@
 
 config MACH_APF9328
 	bool "APF9328"
-	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX1
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
@@ -142,11 +137,11 @@
 
 config MACH_MX21ADS
 	bool "MX21ADS platform"
-	select SOC_IMX21
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX21
 	help
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -155,22 +150,21 @@
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
-	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX25
 
 config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
-	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -182,6 +176,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX25
 
 choice
 	prompt "Baseboard"
@@ -204,20 +199,19 @@
 
 config MACH_MX27ADS
 	bool "MX27ADS platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
+	select SOC_IMX27
 	help
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -226,6 +220,7 @@
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 	  includes specific configurations for the module and its peripherals.
@@ -247,7 +242,6 @@
 
 config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -256,6 +250,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -297,12 +292,12 @@
 
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MX2_CAMERA
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -310,13 +305,13 @@
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
@@ -325,6 +320,7 @@
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select LEDS_GPIO_REGISTER
+	select SOC_IMX27
 	help
 	  Include support for Visstrim_m10 platform and its different variants.
 	  This includes specific configurations for the board and its
@@ -332,16 +328,15 @@
 
 config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
 	help
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -354,27 +349,28 @@
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
 config MACH_MXT_TD60
 	bool "Maxtrack i-MXT TD60"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX27
 	help
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
 
 config MACH_IMX27IPCAM
 	bool "IMX27 IPCAM platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
 	help
 	  Include support for IMX27 IPCAM platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -394,11 +390,11 @@
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
-	select SOC_IMX31
+	default y
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
+	select SOC_IMX31
 	help
 	  Include support for MX31ADS platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -416,21 +412,19 @@
 
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
-	select SOC_IMX31
-	select MXC_ULPI if USB_ULPI
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -439,13 +433,14 @@
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -456,6 +451,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -472,8 +468,6 @@
 
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
-	select SOC_IMX31
-	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -485,7 +479,9 @@
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -501,7 +497,6 @@
 
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -513,22 +508,22 @@
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -537,23 +532,24 @@
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_BUG
 	bool "Support Buglabs BUGBase platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for BUGBase 1.3 platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -561,7 +557,6 @@
 config MACH_IMX31_DT
 	bool "Support i.MX31 platforms from device tree"
 	select SOC_IMX31
-	select USE_OF
 	help
 	  Include support for Freescale i.MX31 based platforms
 	  using the device tree for discovery.
@@ -570,7 +565,6 @@
 
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -582,14 +576,13 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
 	help
 	  Include support for Phytec pcm043 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
-	select SOC_IMX35
-	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -600,13 +593,14 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_DEBUG_BOARD
+	select SOC_IMX35
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_EUKREA_CPUIMX35SD
 	bool "Support Eukrea CPUIMX35 Platform"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -616,6 +610,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -640,16 +635,16 @@
 
 config MACH_VPR200
 	bool "Support VPR200 platform"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX35
 	help
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -659,11 +654,11 @@
 config MACH_MX50_RDP
 	bool "Support MX50 reference design platform"
 	depends on BROKEN
-	select SOC_IMX50
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX50
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
@@ -672,15 +667,14 @@
 
 config MACH_IMX51_DT
 	bool "Support i.MX51 platforms from device tree"
-	select SOC_IMX51
 	select MACH_MX51_BABBAGE
+	select SOC_IMX51
 	help
 	  Include support for Freescale i.MX51 based platforms
 	  using the device tree for discovery
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -688,6 +682,7 @@
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its
@@ -695,27 +690,27 @@
 
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
+	select SOC_IMX51
 	help
 	  Include support for MX51PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
 	help
 	  Include support for Eukrea CPUIMX51SD platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -737,95 +732,19 @@
 
 endchoice
 
-config MX51_EFIKA_COMMON
-	bool
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_PATA_IMX
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
-	bool "Support MX51 Genesi Efika MX nettop"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika MX nettop. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
-	bool "Support MX51 Genesi Efika Smartbook"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika Smartbook. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
-	bool "Support i.MX53 platforms from device tree"
-	select SOC_IMX53
-	select MACH_MX53_ARD
-	select MACH_MX53_EVK
-	select MACH_MX53_LOCO
-	select MACH_MX53_SMD
-	help
-	  Include support for Freescale i.MX53 based platforms
-	  using the device tree for discovery
-
-config MACH_MX53_EVK
-	bool "Support MX53 EVK platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
-	bool "Support MX53 SMD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX53 SMD platform. This includes specific
-	  configurations for the board and its peripherals.
+comment "Device tree only"
 
-config MACH_MX53_LOCO
-	bool "Support MX53 LOCO platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 LOCO platform. This includes specific
-	  configurations for the board and its peripherals.
+config	SOC_IMX53
+	bool "i.MX53 support"
+	select ARCH_MX5
+	select ARCH_MX53
+	select HAVE_CAN_FLEXCAN if CAN
+	select PINCTRL
+	select PINCTRL_IMX53
+	select SOC_IMX5
 
-config MACH_MX53_ARD
-	bool "Support MX53 ARD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	help
-	  Include support for MX53 ARD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX6 family:"
+	  This enables support for Freescale i.MX53 processor.
 
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
@@ -839,7 +758,7 @@
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select HAVE_SMP
-	select MFD_ANATOP
+	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_IMX6Q
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-imx27_visstrim_m10.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-imx27_visstrim_m10.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-imx27_visstrim_m10.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,13 +32,14 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/leds.h>
-#include <linux/memblock.h>
+#include <linux/platform_data/asoc-mx27vis.h>
 #include <media/soc_camera.h>
 #include <sound/tlv320aic32x4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/system_info.h>
+#include <asm/memblock.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
@@ -58,6 +59,11 @@
 #define EXPBOARD_BIT1		(GPIO_PORTD + 27)
 #define EXPBOARD_BIT0		(GPIO_PORTD + 28)
 
+#define AMP_GAIN_0		(GPIO_PORTF + 9)
+#define AMP_GAIN_1		(GPIO_PORTF + 8)
+#define AMP_MUTE_SDL		(GPIO_PORTE + 5)
+#define AMP_MUTE_SDR		(GPIO_PORTF + 7)
+
 static const int visstrim_m10_pins[] __initconst = {
 	/* UART1 (console) */
 	PE12_PF_UART1_TXD,
@@ -139,6 +145,11 @@
 	EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
 	EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
 	EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	/* Audio AMP control */
+	AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
+	AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
+	AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
+	AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
 };
 
 static struct gpio visstrim_m10_version_gpios[] = {
@@ -166,6 +177,26 @@
 		.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
 		.label = "usbotg_cs",
 	},
+	{
+		.gpio = AMP_GAIN_0,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-gain-0",
+	},
+	{
+		.gpio = AMP_GAIN_1,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-gain-1",
+	},
+	{
+		.gpio = AMP_MUTE_SDL,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-mute-sdl",
+	},
+	{
+		.gpio = AMP_MUTE_SDR,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-mute-sdr",
+	},
 };
 
 /* Camera */
@@ -233,10 +264,8 @@
 static void __init visstrim_reserve(void)
 {
 	/* reserve 4 MiB for mx2-camera */
-	mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE,
+	mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE,
 			MX2_CAMERA_BUF_SIZE);
-	memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
-	memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
 }
 
 /* GPIOs used as events for applications */
@@ -405,6 +434,55 @@
 	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
 };
 
+/* coda */
+
+static void __init visstrim_coda_init(void)
+{
+	struct platform_device *pdev;
+	int dma;
+
+	pdev = imx27_add_coda();
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					  mx2_camera_base + MX2_CAMERA_BUF_SIZE,
+					  mx2_camera_base + MX2_CAMERA_BUF_SIZE,
+					  MX2_CAMERA_BUF_SIZE,
+					  DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		return;
+}
+
+/* DMA deinterlace */
+static struct platform_device visstrim_deinterlace = {
+	.name = "m2m-deinterlace",
+	.id = 0,
+};
+
+static void __init visstrim_deinterlace_init(void)
+{
+	int ret = -ENOMEM;
+	struct platform_device *pdev = &visstrim_deinterlace;
+	int dma;
+
+	ret = platform_device_register(pdev);
+
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					  mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
+					  mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
+					  MX2_CAMERA_BUF_SIZE,
+					  DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		return;
+}
+
+
+/* Audio */
+static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
+	.amp_gain0_gpio = AMP_GAIN_0,
+	.amp_gain1_gpio = AMP_GAIN_1,
+	.amp_mutel_gpio = AMP_MUTE_SDL,
+	.amp_muter_gpio = AMP_MUTE_SDR,
+};
+
 static void __init visstrim_m10_revision(void)
 {
 	int exp_version = 0;
@@ -463,11 +541,14 @@
 	imx27_add_fec(NULL);
 	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0);
+	imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
+				sizeof(snd_mx27vis_pdata));
 	platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
 				      &iclink_tvp5150, sizeof(iclink_tvp5150));
 	gpio_led_register_device(0, &visstrim_m10_led_data);
+	visstrim_deinterlace_init();
 	visstrim_camera_init();
+	visstrim_coda_init();
 }
 
 static void __init visstrim_m10_timer_init(void)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-imx53.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-imx53.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-imx53.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-imx53.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx53.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate().  Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+	OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+	{ /* sentinel */ }
+};
+
+static void __init imx53_qsb_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys(NULL, "ssi_ext1");
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clk ssi_ext1\n");
+		return;
+	}
+
+	clk_register_clkdev(clk, NULL, "0-000a");
+}
+
+static void __init imx53_dt_init(void)
+{
+	if (of_machine_is_compatible("fsl,imx53-qsb"))
+		imx53_qsb_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     imx53_auxdata_lookup, NULL);
+}
+
+static void __init imx53_timer_init(void)
+{
+	mx53_clocks_init_dt();
+}
+
+static struct sys_timer imx53_timer = {
+	.init = imx53_timer_init,
+};
+
+static const char *imx53_dt_board_compat[] __initdata = {
+	"fsl,imx53",
+	NULL
+};
+
+DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
+	.map_io		= mx53_map_io,
+	.init_early	= imx53_init_early,
+	.init_irq	= mx53_init_irq,
+	.handle_irq	= imx53_handle_irq,
+	.timer		= &imx53_timer,
+	.init_machine	= imx53_dt_init,
+	.init_late	= imx53_init_late,
+	.dt_compat	= imx53_dt_board_compat,
+	.restart	= mxc_restart,
+MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-imx6q.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-imx6q.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-imx6q.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-imx6q.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,10 +22,10 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <linux/phy.h>
+#include <linux/regmap.h>
 #include <linux/micrel_phy.h>
-#include <linux/mfd/anatop.h>
+#include <linux/mfd/syscon.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -100,7 +100,6 @@
 	clk_set_parent(cko1_sel, ahb);
 	rate = clk_round_rate(cko1, 16000000);
 	clk_set_rate(cko1, rate);
-	clk_register_clkdev(cko1, NULL, "0-000a");
 put_clk:
 	if (!IS_ERR(cko1_sel))
 		clk_put(cko1_sel);
@@ -120,20 +119,7 @@
 
 static void __init imx6q_usb_init(void)
 {
-	struct device_node *np;
-	struct platform_device *pdev = NULL;
-	struct anatop *adata = NULL;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
-	if (np)
-		pdev = of_find_device_by_node(np);
-	if (pdev)
-		adata = platform_get_drvdata(pdev);
-	if (!adata) {
-		if (np)
-			of_node_put(np);
-		return;
-	}
+	struct regmap *anatop;
 
 #define HW_ANADIG_USB1_CHRG_DETECT		0x000001b0
 #define HW_ANADIG_USB2_CHRG_DETECT		0x00000210
@@ -141,30 +127,25 @@
 #define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x00100000
 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x00080000
 
-	/*
-	 * The external charger detector needs to be disabled,
-	 * or the signal at DP will be poor
-	 */
-	anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT,
-			BM_ANADIG_USB_CHRG_DETECT_EN_B
-			| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
-			~0);
-	anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT,
-			BM_ANADIG_USB_CHRG_DETECT_EN_B |
-			BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
-			~0);
-
-	of_node_put(np);
+	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+	if (!IS_ERR(anatop)) {
+		/*
+		 * The external charger detector needs to be disabled,
+		 * or the signal at DP will be poor
+		 */
+		regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
+				BM_ANADIG_USB_CHRG_DETECT_EN_B
+				| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+		regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
+				BM_ANADIG_USB_CHRG_DETECT_EN_B |
+				BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+	} else {
+		pr_warn("failed to find fsl,imx6q-anatop regmap\n");
+	}
 }
 
 static void __init imx6q_init_machine(void)
 {
-	/*
-	 * This should be removed when all imx6q boards have pinctrl
-	 * states for devices defined in device tree.
-	 */
-	pinctrl_provide_dummies();
-
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
 		imx6q_sabrelite_init();
 
@@ -218,14 +199,12 @@
 };
 
 static const char *imx6q_dt_compat[] __initdata = {
-	"fsl,imx6q-arm2",
-	"fsl,imx6q-sabrelite",
-	"fsl,imx6q-sabresd",
 	"fsl,imx6q",
 	NULL,
 };
 
 DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
 	.handle_irq	= imx6q_handle_irq,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-kzm_arm11_01.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-kzm_arm11_01.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-kzm_arm11_01.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-kzm_arm11_01.c	2012-12-10 22:30:57.000000000 -0500
@@ -36,7 +36,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
@@ -259,13 +258,13 @@
  */
 static struct map_desc kzm_io_desc[] __initdata = {
 	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.virtual	= (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
 		.length		= MX31_CS4_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.virtual	= (unsigned long)MX31_CS5_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
 		.length		= MX31_CS5_SIZE,
 		.type		= MT_DEVICE
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx27_3ds.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx27_3ds.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx27_3ds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx27_3ds.c	2012-12-10 22:30:57.000000000 -0500
@@ -158,6 +158,11 @@
 	PB21_PF_CSI_HSYNC,
 	CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
 	CSI_RESET | GPIO_GPIO | GPIO_OUT,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
 };
 
 static struct gpio mx27_3ds_camera_gpios[] = {
@@ -329,13 +334,24 @@
 };
 
 /* MC13783 */
+static struct mc13xxx_codec_platform_data mx27_3ds_codec = {
+	.dac_ssi_port = MC13783_SSI1_PORT,
+	.adc_ssi_port = MC13783_SSI1_PORT,
+};
+
 static struct mc13xxx_platform_data mc13783_pdata = {
 	.regulators = {
 		.regulators = mx27_3ds_regulators,
 		.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
 
 	},
-	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
+	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC |
+						MC13XXX_USE_CODEC,
+	.codec = &mx27_3ds_codec,
+};
+
+static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
+	.flags = IMX_SSI_DMA | IMX_SSI_NET,
 };
 
 /* SPI */
@@ -512,6 +528,9 @@
 	}
 
 	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
+	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+
+	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
 
 static void __init mx27pdk_timer_init(void)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx31ads.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx31ads.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx31ads.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx31ads.c	2012-12-10 22:30:57.000000000 -0500
@@ -540,7 +540,7 @@
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.virtual	= (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
 		.length		= CS4_CS8900_MMIO_START,
 		.type		= MT_DEVICE
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx31lite.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx31lite.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx31lite.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx31lite.c	2012-12-10 22:30:57.000000000 -0500
@@ -207,7 +207,7 @@
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
 		.length = MX31_CS4_SIZE,
 		.type = MT_DEVICE
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx31moboard.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx31moboard.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx31moboard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx31moboard.c	2012-12-10 22:30:57.000000000 -0500
@@ -47,7 +47,7 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ulpi.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 
 #include "devices-imx31.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx51_efikamx.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx51_efikamx.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx51_efikamx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx51_efikamx.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1		IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2		IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED	IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED	IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED		IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY	IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1	IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET		IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF	IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0	IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1	IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2	IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
-	/* board id */
-	MX51_PAD_PCBID0,
-	MX51_PAD_PCBID1,
-	MX51_PAD_PCBID2,
-
-	/* leds */
-	MX51_PAD_CSI1_D9__GPIO3_13,
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-	MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
-	/* power key */
-	MX51_PAD_PWRKEY,
-
-	/* reset */
-	MX51_PAD_DI1_PIN13__GPIO3_2,
-	MX51_PAD_GPIO1_4__GPIO1_4,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/*   PCBID2  PCBID1 PCBID0  STATE
-	1       1      1    ER1:rev1.1
-	1       1      0    ER2:rev1.2
-	1       0      1    ER3:rev1.3
-	1       0      0    ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
-	int id;
-
-	/* things are taking time to settle */
-	msleep(150);
-
-	gpio_request(EFIKAMX_PCBID0, "pcbid0");
-	gpio_direction_input(EFIKAMX_PCBID0);
-	gpio_request(EFIKAMX_PCBID1, "pcbid1");
-	gpio_direction_input(EFIKAMX_PCBID1);
-	gpio_request(EFIKAMX_PCBID2, "pcbid2");
-	gpio_direction_input(EFIKAMX_PCBID2);
-
-	id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
-	id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
-	switch (id) {
-	case 7:
-		system_rev = 0x11;
-		break;
-	case 6:
-		system_rev = 0x12;
-		break;
-	case 5:
-		system_rev = 0x13;
-		break;
-	case 4:
-		system_rev = 0x14;
-		break;
-	default:
-		system_rev = 0x10;
-		break;
-	}
-
-	if ((system_rev == 0x10)
-		|| (system_rev == 0x12)
-		|| (system_rev == 0x14)) {
-		printk(KERN_WARNING
-			"EfikaMX: Unsupported board revision 1.%u!\n",
-			system_rev & 0xf);
-	}
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
-	{
-		.name = "efikamx:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKAMX_GREEN_LED,
-	},
-	{
-		.name = "efikamx:red",
-		.default_trigger = "ide-disk",
-		.gpio = EFIKAMX_RED_LED,
-	},
-	{
-		.name = "efikamx:blue",
-		.default_trigger = "mmc0",
-		.gpio = EFIKAMX_BLUE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikamx_leds_data __initconst = {
-	.leds = mx51_efikamx_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKAMX_POWER_KEY,
-		.type = EV_PWR,
-		.desc = "Power Button (CM)",
-		.wakeup = 1,
-		.debounce_interval = 10, /* ms */
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
-	.buttons = mx51_efikamx_powerkey,
-	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-static void mx51_efikamx_restart(char mode, const char *cmd)
-{
-	if (system_rev == 0x11)
-		gpio_direction_output(EFIKAMX_RESET1_1, 0);
-	else
-		gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
-	if (!IS_ERR(coincell))
-		regulator_disable(coincell);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
-	pwgt1 = regulator_get(NULL, "pwgt1");
-	pwgt2 = regulator_get(NULL, "pwgt2");
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_enable(pwgt1);
-		regulator_enable(pwgt2);
-	}
-	gpio_request(EFIKAMX_POWEROFF, "poweroff");
-	pm_power_off = mx51_efikamx_power_off;
-
-	/* enable coincell charger. maybe need a small power driver ? */
-	coincell = regulator_get(NULL, "coincell");
-	if (!IS_ERR(coincell)) {
-		regulator_set_voltage(coincell, 3000000, 3000000);
-		regulator_enable(coincell);
-	}
-
-	regulator_has_full_constraints();
-
-	return 0;
-}
-
-static void __init mx51_efikamx_init_late(void)
-{
-	imx51_init_late();
-	mx51_efikamx_power_init();
-}
-
-static void __init mx51_efikamx_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
-					ARRAY_SIZE(mx51efikamx_pads));
-	efika_board_common_init();
-
-	mx51_efikamx_board_id();
-
-	/* on < 1.2 boards both SD controllers are used */
-	if (system_rev < 0x12) {
-		imx51_add_sdhci_esdhc_imx(0, NULL);
-		imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
-		mx51_efikamx_leds[2].default_trigger = "mmc1";
-	} else
-		imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
-	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
-	if (system_rev == 0x11) {
-		gpio_request(EFIKAMX_RESET1_1, "reset");
-		gpio_direction_output(EFIKAMX_RESET1_1, 1);
-	} else {
-		gpio_request(EFIKAMX_RESET, "reset");
-		gpio_direction_output(EFIKAMX_RESET, 1);
-	}
-
-	/*
-	 * enable wifi by default only on mx
-	 * sb and mx have same wlan pin but the value to enable it are
-	 * different :/
-	 */
-	gpio_request(EFIKA_WLAN_EN, "wlan_en");
-	gpio_direction_output(EFIKA_WLAN_EN, 0);
-	msleep(10);
-
-	gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
-	gpio_direction_output(EFIKA_WLAN_RESET, 0);
-	msleep(10);
-	gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
-	.init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_efikamx_timer,
-	.init_machine = mx51_efikamx_init,
-	.init_late = mx51_efikamx_init_late,
-	.restart = mx51_efikamx_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx51_efikasb.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx51_efikasb.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx51_efikasb.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx51_efikasb.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,296 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED	IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED	IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0		IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1		IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY		IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID		IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF	IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD	IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
-	/* USB HOST2 */
-	MX51_PAD_EIM_D16__USBH2_DATA0,
-	MX51_PAD_EIM_D17__USBH2_DATA1,
-	MX51_PAD_EIM_D18__USBH2_DATA2,
-	MX51_PAD_EIM_D19__USBH2_DATA3,
-	MX51_PAD_EIM_D20__USBH2_DATA4,
-	MX51_PAD_EIM_D21__USBH2_DATA5,
-	MX51_PAD_EIM_D22__USBH2_DATA6,
-	MX51_PAD_EIM_D23__USBH2_DATA7,
-	MX51_PAD_EIM_A24__USBH2_CLK,
-	MX51_PAD_EIM_A25__USBH2_DIR,
-	MX51_PAD_EIM_A26__USBH2_STP,
-	MX51_PAD_EIM_A27__USBH2_NXT,
-
-	/* leds */
-	MX51_PAD_EIM_CS0__GPIO2_25,
-	MX51_PAD_GPIO1_3__GPIO1_3,
-
-	/* pcb id */
-	MX51_PAD_EIM_CS3__GPIO2_28,
-	MX51_PAD_EIM_CS4__GPIO2_29,
-
-	/* lid */
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
-	/* power key*/
-	MX51_PAD_PWRKEY,
-
-	/* wifi/bt button */
-	MX51_PAD_DI1_PIN12__GPIO3_1,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
-	/* wdog reset */
-	MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
-	/* BT */
-	MX51_PAD_EIM_A17__GPIO2_11,
-
-	MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
-	iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
-	mxc_iomux_v3_setup_pad(usbh2gpio);
-	gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
-	gpio_direction_output(EFIKASB_USBH2_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKASB_USBH2_STP, 1);
-	msleep(1);
-
-	gpio_free(EFIKASB_USBH2_STP);
-	mxc_iomux_v3_setup_pad(usbh2stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
-	.init   = initialize_usbh2_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
-	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-	if (usbh2_config.otg)
-		imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
-	{
-		.name = "efikasb:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKASB_GREEN_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "efikasb:white",
-		.default_trigger = "caps",
-		.gpio = EFIKASB_WHITE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikasb_leds_data __initconst = {
-	.leds = mx51_efikasb_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKASB_PWRKEY,
-		.type = EV_KEY,
-		.desc = "Power Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-	{
-		.code = SW_LID,
-		.gpio = EFIKASB_LID,
-		.type = EV_SW,
-		.desc = "Lid Switch",
-		.active_low = 1,
-	},
-	{
-		.code = KEY_RFKILL,
-		.gpio = EFIKASB_RFKILL,
-		.type = EV_KEY,
-		.desc = "rfkill",
-		.active_low = 1,
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
-	.buttons = mx51_efikasb_keys,
-	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD	IMX_GPIO_NR(2, 27)
-	.cd_gpio = EFIKASB_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
-	gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
-	pwgt1 = regulator_get(NULL, "pwgt1");
-	pwgt2 = regulator_get(NULL, "pwgt2");
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_enable(pwgt1);
-		regulator_enable(pwgt2);
-	}
-	gpio_request(EFIKASB_POWEROFF, "poweroff");
-	pm_power_off = mx51_efikasb_power_off;
-
-	regulator_has_full_constraints();
-
-	return 0;
-}
-
-static void __init mx51_efikasb_init_late(void)
-{
-	imx51_init_late();
-	mx51_efikasb_power_init();
-}
-
-/* 01     R1.3 board
-   10     R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
-	int id;
-
-	gpio_request(EFIKASB_PCBID0, "pcb id0");
-	gpio_direction_input(EFIKASB_PCBID0);
-	gpio_request(EFIKASB_PCBID1, "pcb id1");
-	gpio_direction_input(EFIKASB_PCBID1);
-
-	id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
-	switch (id) {
-	default:
-		break;
-	case 1:
-		system_rev = 0x13;
-		break;
-	case 2:
-		system_rev = 0x20;
-		break;
-	}
-}
-
-static void __init efikasb_board_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
-					ARRAY_SIZE(mx51efikasb_pads));
-	efika_board_common_init();
-
-	mx51_efikasb_board_id();
-	mx51_efikasb_usb();
-	imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
-	imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
-	imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
-	.init	= mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.init_machine =  efikasb_board_init,
-	.init_late = mx51_efikasb_init_late,
-	.timer = &mx51_efikasb_timer,
-	.restart	= mxc_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_ard.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_ard.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_ard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_ard.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD		IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP		IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B	IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN		IMX_GPIO_NR(4, 0)
-#define ARD_HOME			IMX_GPIO_NR(5, 10)
-#define ARD_BACK			IMX_GPIO_NR(5, 11)
-#define ARD_PROG			IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP		IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
-	/* UART1 */
-	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
-	/* WEIM for CS1 */
-	MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
-	MX53_PAD_EIM_D16__EMI_WEIM_D_16,
-	MX53_PAD_EIM_D17__EMI_WEIM_D_17,
-	MX53_PAD_EIM_D18__EMI_WEIM_D_18,
-	MX53_PAD_EIM_D19__EMI_WEIM_D_19,
-	MX53_PAD_EIM_D20__EMI_WEIM_D_20,
-	MX53_PAD_EIM_D21__EMI_WEIM_D_21,
-	MX53_PAD_EIM_D22__EMI_WEIM_D_22,
-	MX53_PAD_EIM_D23__EMI_WEIM_D_23,
-	MX53_PAD_EIM_D24__EMI_WEIM_D_24,
-	MX53_PAD_EIM_D25__EMI_WEIM_D_25,
-	MX53_PAD_EIM_D26__EMI_WEIM_D_26,
-	MX53_PAD_EIM_D27__EMI_WEIM_D_27,
-	MX53_PAD_EIM_D28__EMI_WEIM_D_28,
-	MX53_PAD_EIM_D29__EMI_WEIM_D_29,
-	MX53_PAD_EIM_D30__EMI_WEIM_D_30,
-	MX53_PAD_EIM_D31__EMI_WEIM_D_31,
-	MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-	MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-	MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-	MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-	MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-	MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-	MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-	MX53_PAD_EIM_OE__EMI_WEIM_OE,
-	MX53_PAD_EIM_RW__EMI_WEIM_RW,
-	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
-	/* SDHC1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
-	MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
-	MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
-	MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
-	MX53_PAD_GPIO_1__GPIO1_1,
-	MX53_PAD_GPIO_9__GPIO1_9,
-	/* I2C2 */
-	MX53_PAD_EIM_EB2__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* I2C3 */
-	MX53_PAD_GPIO_3__I2C3_SCL,
-	MX53_PAD_GPIO_16__I2C3_SDA,
-	/* GPIO */
-	MX53_PAD_DISP0_DAT16__GPIO5_10,	/* home */
-	MX53_PAD_DISP0_DAT17__GPIO5_11,	/* back */
-	MX53_PAD_DISP0_DAT18__GPIO5_12,	/* prog */
-	MX53_PAD_DISP0_DAT19__GPIO5_13,	/* vol up */
-	MX53_PAD_GPIO_10__GPIO4_0,		/* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{							\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,			\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button ard_buttons[] = {
-	GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
-	GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
-	GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
-	GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
-	.buttons        = ard_buttons,
-	.nbuttons       = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
-	{
-		.start = MX53_CS1_64MB_BASE_ADDR,
-		.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* irq number is run-time assigned */
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
-	.name = "smsc911x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
-	.resource = ard_smsc911x_resources,
-	.dev = {
-		.platform_data = &ard_smsc911x_config,
-	},
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
-	.cd_gpio = ARD_SD1_CD,
-	.wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
-	.bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
-	.bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
-	gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
-	gpio_direction_input(ARD_ETHERNET_INT_B);
-
-	gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
-	gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
-	u32 reg;
-	void __iomem *weim_base, *iomuxc_base;
-
-	weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
-	if (!weim_base)
-		return -ENOMEM;
-
-	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-	if (!iomuxc_base) {
-		iounmap(weim_base);
-		return -ENOMEM;
-	}
-
-	/* CS1 timings for LAN9220 */
-	writel(0x20001, (weim_base + 0x18));
-	writel(0x0, (weim_base + 0x1C));
-	writel(0x16000202, (weim_base + 0x20));
-	writel(0x00000002, (weim_base + 0x24));
-	writel(0x16002082, (weim_base + 0x28));
-	writel(0x00000000, (weim_base + 0x2C));
-	writel(0x00000000, (weim_base + 0x90));
-
-	/* specify 64 MB on CS1 and CS0 on GPR1 */
-	reg = readl(iomuxc_base + 0x4);
-	reg &= ~0x3F;
-	reg |= 0x1B;
-	writel(reg, (iomuxc_base + 0x4));
-
-	iounmap(iomuxc_base);
-	iounmap(weim_base);
-
-	return 0;
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-void __init imx53_ard_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
-					 ARRAY_SIZE(mx53_ard_pads));
-	weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
-	&ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
-	imx53_soc_init();
-	imx53_add_imx_uart(0, NULL);
-
-	imx53_ard_common_init();
-	mx53_ard_io_init();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
-	ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
-	imx53_add_imx2_wdt(0);
-	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
-	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
-	imx_add_gpio_keys(&ard_button_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
-	.init	= mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_ard_timer,
-	.init_machine = mx53_ard_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_evk.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_evk.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_evk.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_evk.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED		IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-	MX53_PAD_PATA_DIOR__UART2_RTS,
-	MX53_PAD_PATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
-	MX53_PAD_EIM_D16__ECSPI1_SCLK,
-	MX53_PAD_EIM_D17__ECSPI1_MISO,
-	MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
-	/* ecspi chip select lines */
-	MX53_PAD_EIM_EB2__GPIO2_30,
-	MX53_PAD_EIM_D19__GPIO3_19,
-	/* LED */
-	MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= MX53EVK_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
-	.leds		= mx53evk_leds,
-	.num_leds	= ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
-	imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
-							"fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx53_evk_spi_cs[] = {
-	EVK_ECSPI1_CS0,
-	EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
-	.chipselect     = mx53_evk_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
-					 ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
-	imx53_soc_init();
-	imx53_evk_common_init();
-
-	mx53_evk_init_uart();
-	mx53_evk_fec_reset();
-	imx53_add_fec(&mx53_evk_fec_pdata);
-
-	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-
-	spi_register_board_info(mx53_evk_spi_board_info,
-		ARRAY_SIZE(mx53_evk_spi_board_info));
-	imx53_add_ecspi(0, &mx53_evk_spi_data);
-	imx53_add_imx2_wdt(0);
-	gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
-	.init	= mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_evk_timer,
-	.init_machine = mx53_evk_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_loco.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_loco.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_loco.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_loco.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define LOCO_LED			IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
-	/* FEC */
-	MX53_PAD_FEC_MDC__FEC_MDC,
-	MX53_PAD_FEC_MDIO__FEC_MDIO,
-	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
-	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
-	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
-	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
-	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
-	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
-	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
-	/* FEC_nRST */
-	MX53_PAD_PATA_DA_0__GPIO7_6,
-	/* FEC_nINT */
-	MX53_PAD_PATA_DATA4__GPIO2_4,
-	/* AUDMUX5 */
-	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
-	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
-	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
-	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
-	/* I2C2 */
-	MX53_PAD_KEY_COL3__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD1_CD */
-	MX53_PAD_EIM_DA13__GPIO3_13,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-	/* SD3_CD */
-	MX53_PAD_EIM_DA11__GPIO3_11,
-	/* SD3_WP */
-	MX53_PAD_EIM_DA12__GPIO3_12,
-	/* VGA */
-	MX53_PAD_EIM_OE__IPU_DI1_PIN7,
-	MX53_PAD_EIM_RW__IPU_DI1_PIN8,
-	/* DISPLB */
-	MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
-	MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
-	MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
-	MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
-	/* DISP0_POWER_EN */
-	MX53_PAD_EIM_D24__GPIO3_24,
-	/* DISP0 DET INT */
-	MX53_PAD_EIM_D31__GPIO3_31,
-	/* LVDS */
-	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
-	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
-	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
-	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
-	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
-	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
-	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
-	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
-	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
-	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* UART1 */
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-	/* CSI0 */
-	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
-	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
-	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
-	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
-	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
-	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
-	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
-	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
-	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
-	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
-	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
-	/* DISPLAY */
-	MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-	MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-	MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-	MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-	MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-	MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-	MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-	MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-	MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-	MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-	MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-	MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-	MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-	MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-	MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-	MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-	MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-	MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-	MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-	MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-	MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-	MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-	MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-	MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-	MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-	MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-	MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-	MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-	/* Audio CLK*/
-	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
-	/* PWM */
-	MX53_PAD_GPIO_1__PWM2_PWMO,
-	/* SPDIF */
-	MX53_PAD_GPIO_7__SPDIF_PLOCK,
-	MX53_PAD_GPIO_17__SPDIF_OUT1,
-	/* GPIO */
-	MX53_PAD_PATA_DA_1__GPIO7_7,		/* LED */
-	MX53_PAD_PATA_DA_2__GPIO7_8,
-	MX53_PAD_PATA_DATA5__GPIO2_5,
-	MX53_PAD_PATA_DATA6__GPIO2_6,
-	MX53_PAD_PATA_DATA14__GPIO2_14,
-	MX53_PAD_PATA_DATA15__GPIO2_15,
-	MX53_PAD_PATA_INTRQ__GPIO7_2,
-	MX53_PAD_EIM_WAIT__GPIO5_0,
-	MX53_PAD_NANDF_WP_B__GPIO6_9,
-	MX53_PAD_NANDF_RB0__GPIO6_10,
-	MX53_PAD_NANDF_CS1__GPIO6_14,
-	MX53_PAD_NANDF_CS2__GPIO6_15,
-	MX53_PAD_NANDF_CS3__GPIO6_16,
-	MX53_PAD_GPIO_5__GPIO1_5,
-	MX53_PAD_GPIO_16__GPIO7_11,
-	MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,				\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button loco_buttons[] = {
-	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
-	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
-	.buttons        = loco_buttons,
-	.nbuttons       = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
-	.cd_gpio = LOCO_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
-	.cd_gpio = LOCO_SD3_CD,
-	.wp_gpio = LOCO_SD3_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= LOCO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
-	.leds		= mx53loco_leds,
-	.num_leds	= ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
-					 ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mma8450", 0x1C),
-	},
-};
-
-static void __init mx53_loco_board_init(void)
-{
-	int ret;
-	imx53_soc_init();
-	imx53_qsb_common_init();
-
-	imx53_add_imx_uart(0, NULL);
-	mx53_loco_fec_reset();
-	imx53_add_fec(&mx53_loco_fec_data);
-	imx53_add_imx2_wdt(0);
-
-	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
-	if (ret)
-		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
-	i2c_register_board_info(0, mx53loco_i2c_devices,
-				ARRAY_SIZE(mx53loco_i2c_devices));
-	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
-	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
-	imx_add_gpio_keys(&loco_button_data);
-	gpio_led_register_device(-1, &mx53loco_leds_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
-	.init	= mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_loco_timer,
-	.init_machine = mx53_loco_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_smd.c linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_smd.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mach-mx53_smd.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mach-mx53_smd.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-	MX53_PAD_PATA_DA_1__UART3_CTS,
-	MX53_PAD_PATA_DA_2__UART3_RTS,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD2 */
-	MX53_PAD_SD2_CMD__ESDHC2_CMD,
-	MX53_PAD_SD2_CLK__ESDHC2_CLK,
-	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
-	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
-	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
-	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, NULL);
-	imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
-	int ret;
-
-	/* Enable SATA PWR */
-	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
-			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
-	if (ret) {
-		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
-		return;
-	}
-}
-
-void __init imx53_smd_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
-					 ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
-	imx53_soc_init();
-	imx53_smd_common_init();
-
-	mx53_smd_init_uart();
-	mx53_smd_fec_reset();
-	imx53_add_fec(&mx53_smd_fec_data);
-	imx53_add_imx2_wdt(0);
-	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-	imx53_add_sdhci_esdhc_imx(2, NULL);
-	mx53_smd_ahci_pwr_on();
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
-	.init	= mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_smd_timer,
-	.init_machine = mx53_smd_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/Makefile linux-libre-3.7-gnu/arch/arm/mach-imx/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-imx/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
-			    clk-pfd.o clk-busy.o
+			    clk-pfd.o clk-busy.o clk.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -83,16 +83,9 @@
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
 obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-imx/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-imx/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/Makefile.boot	2012-12-10 22:30:57.000000000 -0500
@@ -37,10 +37,3 @@
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
 initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000
-
-dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
-			       imx53-qsb.dtb imx53-smd.dtb
-dtb-$(CONFIG_SOC_IMX6Q)	+= imx6q-arm2.dtb \
-			   imx6q-sabrelite.dtb \
-			   imx6q-sabresd.dtb \
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mm-imx3.c linux-libre-3.7-gnu/arch/arm/mach-imx/mm-imx3.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mm-imx3.c	2012-09-30 20:51:23.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mm-imx3.c	2012-12-10 22:51:02.000000000 -0500
@@ -108,9 +108,8 @@
 	}
 
 	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-	if (IS_ERR(l2x0_base)) {
-		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-				PTR_ERR(l2x0_base));
+	if (!l2x0_base) {
+		printk(KERN_ERR "remapping L2 cache area failed\n");
 		return;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mm-imx5.c linux-libre-3.7-gnu/arch/arm/mach-imx/mm-imx5.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mm-imx5.c	2012-09-30 20:51:25.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mm-imx5.c	2012-12-10 22:51:04.000000000 -0500
@@ -128,25 +128,6 @@
 	.script_addrs = &imx51_sdma_script,
 };
 
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.app_2_mcu_addr = 683,
-	.mcu_2_app_addr = 747,
-	.uart_2_mcu_addr = 817,
-	.shp_2_mcu_addr = 891,
-	.mcu_2_shp_addr = 960,
-	.uartsh_2_mcu_addr = 1032,
-	.spdif_2_mcu_addr = 1100,
-	.mcu_2_spdif_addr = 1134,
-	.firi_2_mcu_addr = 1193,
-	.mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
-	.fw_name = "/*(DEBLOBBED)*/",
-	.script_addrs = &imx53_sdma_script,
-};
-
 static const struct resource imx50_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
 };
@@ -155,10 +136,6 @@
 	DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
-static const struct resource imx53_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
 void __init imx50_soc_init(void)
 {
 	/* i.mx50 has the i.mx35 type gpio */
@@ -196,30 +173,6 @@
 					ARRAY_SIZE(imx51_audmux_res));
 }
 
-void __init imx53_soc_init(void)
-{
-	/* i.mx53 has the i.mx35 type gpio */
-	mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
-	mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
-	pinctrl_provide_dummies();
-	/* i.mx53 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-
-	/* Setup AIPS registers */
-	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
-	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
-
-	/* i.mx53 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
-					ARRAY_SIZE(imx53_audmux_res));
-}
-
 void __init imx51_init_late(void)
 {
 	mx51_neon_fixup();
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mx1-camera-fiq-ksym.c linux-libre-3.7-gnu/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mx1-camera-fiq-ksym.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mx1-camera-fiq-ksym.c	2012-12-10 22:30:57.000000000 -0500
@@ -11,7 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
 
 /* IMX camera FIQ handler */
 EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/mx51_efika.c linux-libre-3.7-gnu/arch/arm/mach-imx/mx51_efika.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/mx51_efika.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/mx51_efika.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,633 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET          0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN    (1 << 25)
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-
-#define EFIKAMX_USB_HUB_RESET	IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP	IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0		IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1		IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-
-	/* SD/MMC WP/CD */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-	MX51_PAD_GPIO1_7__SD2_WP,
-	MX51_PAD_GPIO1_8__SD2_CD,
-
-	/* spi */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_GPIO1_6__GPIO1_6,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB RESET */
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* WLAN */
-	MX51_PAD_EIM_A22__GPIO2_16,
-	MX51_PAD_EIM_A16__GPIO2_10,
-
-	/* USB PHY RESET */
-	MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init   = initialize_otg_port,
-	.portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *socregs_base;
-
-	mxc_iomux_v3_setup_pad(usbh1gpio);
-	gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
-	gpio_direction_output(EFIKAMX_USBH1_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USBH1_STP, 1);
-	msleep(1);
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* The clock for the USBH1 ULPI port will come externally */
-	/* from the PHY. */
-	v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-			socregs_base + MX51_USB_CTRL_1_OFFSET);
-
-	iounmap(usb_base);
-
-	gpio_free(EFIKAMX_USBH1_STP);
-	mxc_iomux_v3_setup_pad(usbh1stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
-	.init   = initialize_usbh1_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
-	gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
-	gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
-	mx51_efika_hubreset();
-
-	/* pulling it low, means no USB at all... */
-	gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
-	gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
-	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
-	imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	if (usbh1_config.otg)
-		imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
-	{
-	 .name = "u-boot",
-	 .offset = 0,
-	 .size = SZ_256K,
-	},
-	{
-	  .name = "config",
-	  .offset = MTDPART_OFS_APPEND,
-	  .size = SZ_64K,
-	},
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
-	.name		= "spi_flash",
-	.parts		= mx51_efika_spi_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(mx51_efika_spi_nor_partitions),
-	.type		= "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDA", "1-000a"),
-	REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
-	{
-		.supply = "pwgt1",
-	}
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
-	{
-		.supply = "pwgt2",
-	}
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
-	{
-		.supply = "coincell",
-	}
-};
-
-static struct regulator_init_data sw1_init = {
-	.constraints = {
-		.name = "SW1",
-		.min_uV = 600000,
-		.max_uV = 1375000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.valid_modes_mask = 0,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 850000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
-	.consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
-	.constraints = {
-		.name = "SW2",
-		.min_uV = 900000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 950000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	}
-};
-
-static struct regulator_init_data sw3_init = {
-	.constraints = {
-		.name = "SW3",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw4_init = {
-	.constraints = {
-		.name = "SW4",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data viohi_init = {
-	.constraints = {
-		.name = "VIOHI",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb_init = {
-	.constraints = {
-		.name = "VUSB",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data swbst_init = {
-	.constraints = {
-		.name = "SWBST",
-	}
-};
-
-static struct regulator_init_data vdig_init = {
-	.constraints = {
-		.name = "VDIG",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
-	.consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
-	.constraints = {
-		.name = "VPLL",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb2_init = {
-	.constraints = {
-		.name = "VUSB2",
-		.min_uV = 2400000,
-		.max_uV = 2775000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vvideo_init = {
-	.constraints = {
-		.name = "VVIDEO",
-		.min_uV = 2775000,
-		.max_uV = 2775000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
-	.consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
-	.constraints = {
-		.name = "VAUDIO",
-		.min_uV = 2300000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vsd_init = {
-	.constraints = {
-		.name = "VSD",
-		.min_uV = 1800000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
-	.consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
-	.constraints = {
-		.name = "VCAM",
-		.min_uV = 2500000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen1_init = {
-	.constraints = {
-		.name = "VGEN1",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen2_init = {
-	.constraints = {
-		.name = "VGEN2",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen3_init = {
-	.constraints = {
-		.name = "VGEN3",
-		.min_uV = 1800000,
-		.max_uV = 2900000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data gpo1_init = {
-	.constraints = {
-		.name = "GPO1",
-	}
-};
-
-static struct regulator_init_data gpo2_init = {
-	.constraints = {
-		.name = "GPO2",
-	}
-};
-
-static struct regulator_init_data gpo3_init = {
-	.constraints = {
-		.name = "GPO3",
-	}
-};
-
-static struct regulator_init_data gpo4_init = {
-	.constraints = {
-		.name = "GPO4",
-	}
-};
-
-static struct regulator_init_data pwgt1_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
-	.consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
-	.consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
-	.constraints = {
-		.name = "COINCELL",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
-	.consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
-	{ .id = MC13892_SW1,		.init_data =  &sw1_init },
-	{ .id = MC13892_SW2,		.init_data =  &sw2_init },
-	{ .id = MC13892_SW3,		.init_data =  &sw3_init },
-	{ .id = MC13892_SW4,		.init_data =  &sw4_init },
-	{ .id = MC13892_SWBST,		.init_data =  &swbst_init },
-	{ .id = MC13892_VIOHI,		.init_data =  &viohi_init },
-	{ .id = MC13892_VPLL,		.init_data =  &vpll_init },
-	{ .id = MC13892_VDIG,		.init_data =  &vdig_init },
-	{ .id = MC13892_VSD,		.init_data =  &vsd_init },
-	{ .id = MC13892_VUSB2,		.init_data =  &vusb2_init },
-	{ .id = MC13892_VVIDEO,		.init_data =  &vvideo_init },
-	{ .id = MC13892_VAUDIO,		.init_data =  &vaudio_init },
-	{ .id = MC13892_VCAM,		.init_data =  &vcam_init },
-	{ .id = MC13892_VGEN1,		.init_data =  &vgen1_init },
-	{ .id = MC13892_VGEN2,		.init_data =  &vgen2_init },
-	{ .id = MC13892_VGEN3,		.init_data =  &vgen3_init },
-	{ .id = MC13892_VUSB,		.init_data =  &vusb_init },
-	{ .id = MC13892_GPO1,		.init_data =  &gpo1_init },
-	{ .id = MC13892_GPO2,		.init_data =  &gpo2_init },
-	{ .id = MC13892_GPO3,		.init_data =  &gpo3_init },
-	{ .id = MC13892_GPO4,		.init_data =  &gpo4_init },
-	{ .id = MC13892_PWGT1SPI,	.init_data = &pwgt1_init },
-	{ .id = MC13892_PWGT2SPI,	.init_data = &pwgt2_init },
-	{ .id = MC13892_VCOINCELL,	.init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
-	.flags = MC13XXX_USE_RTC,
-	.regulators = {
-		.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
-		.regulators = mx51_efika_regulators,
-	},
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &mx51_efika_spi_flash_data,
-		.irq = -1,
-	},
-	{
-		.modalias = "mc13892",
-		.max_speed_hz = 1000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &mx51_efika_mc13892_data,
-		/* irq number is run-time assigned */
-	},
-};
-
-static int mx51_efika_spi_cs[] = {
-	EFIKAMX_SPI_CS0,
-	EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
-	.chipselect     = mx51_efika_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
-					ARRAY_SIZE(mx51efika_pads));
-	imx51_add_imx_uart(0, &uart_pdata);
-	mx51_efika_usb();
-
-	/* FIXME: comes from original code. check this. */
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		sw2_init.constraints.state_mem.uV = 1100000;
-	else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
-		sw2_init.constraints.state_mem.uV = 1250000;
-		sw1_init.constraints.state_mem.uV = 1000000;
-	}
-	if (machine_is_mx51_efikasb())
-		vgen1_init.constraints.max_uV = 1200000;
-
-	gpio_request(EFIKAMX_PMIC, "pmic irq");
-	gpio_direction_input(EFIKAMX_PMIC);
-	mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
-	spi_register_board_info(mx51_efika_spi_board_info,
-		ARRAY_SIZE(mx51_efika_spi_board_info));
-	imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
-	imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-imx/platsmp.c linux-libre-3.7-gnu/arch/arm/mach-imx/platsmp.c
--- linux-libre-3.6-gnu/arch/arm/mach-imx/platsmp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-imx/platsmp.c	2012-12-10 22:30:57.000000000 -0500
@@ -41,7 +41,7 @@
 	scu_base = IMX_IO_ADDRESS(base);
 }
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit imx_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -51,7 +51,7 @@
 	gic_secondary_init(0);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	imx_set_cpu_jump(cpu, v7_secondary_startup);
 	imx_enable_cpu(cpu, true);
@@ -62,7 +62,7 @@
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init imx_smp_init_cpus(void)
 {
 	int i, ncores;
 
@@ -79,7 +79,17 @@
 	scu_enable(scu_base);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 {
 	imx_smp_prepare();
 }
+
+struct smp_operations  imx_smp_ops __initdata = {
+	.smp_init_cpus		= imx_smp_init_cpus,
+	.smp_prepare_cpus	= imx_smp_prepare_cpus,
+	.smp_secondary_init	= imx_secondary_init,
+	.smp_boot_secondary	= imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= imx_cpu_die,
+#endif
+};
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/common.h linux-libre-3.7-gnu/arch/arm/mach-integrator/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,3 +1,6 @@
+#include <linux/amba/serial.h>
+extern struct amba_pl010_data integrator_uart_data;
 void integrator_init_early(void);
+int integrator_init(bool is_cp);
 void integrator_reserve(void);
 void integrator_restart(char, const char *);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/core.c linux-libre-3.7-gnu/arch/arm/mach-integrator/core.c
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/core.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/core.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,12 +28,13 @@
 #include <mach/cm.h>
 #include <mach/irqs.h>
 
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
-static struct amba_pl010_data integrator_uart_data;
+#include "common.h"
+
+#ifdef CONFIG_ATAGS
 
 #define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
 #define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
@@ -61,7 +62,7 @@
 	&kmi1_device,
 };
 
-static int __init integrator_init(void)
+int __init integrator_init(bool is_cp)
 {
 	int i;
 
@@ -70,7 +71,7 @@
 	 * hard-code them. The Integator/CP and forward have proper cell IDs.
 	 * Else we leave them undefined to the bus driver can autoprobe them.
 	 */
-	if (machine_is_integrator()) {
+	if (!is_cp) {
 		rtc_device.periphid	= 0x00041030;
 		uart0_device.periphid	= 0x00041010;
 		uart1_device.periphid	= 0x00041010;
@@ -86,7 +87,7 @@
 	return 0;
 }
 
-arch_initcall(integrator_init);
+#endif
 
 /*
  * On the Integrator platform, the port RTS and DTR are provided by
@@ -95,17 +96,20 @@
  *  UART0  7    6
  *  UART1  5    4
  */
-#define SC_CTRLC	IO_ADDRESS(INTEGRATOR_SC_CTRLC)
-#define SC_CTRLS	IO_ADDRESS(INTEGRATOR_SC_CTRLS)
+#define SC_CTRLC	__io_address(INTEGRATOR_SC_CTRLC)
+#define SC_CTRLS	__io_address(INTEGRATOR_SC_CTRLS)
 
 static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
 {
 	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+	u32 phybase = dev->res.start;
 
-	if (dev == &uart0_device) {
+	if (phybase == INTEGRATOR_UART0_BASE) {
+		/* UART0 */
 		rts_mask = 1 << 4;
 		dtr_mask = 1 << 5;
 	} else {
+		/* UART1 */
 		rts_mask = 1 << 6;
 		dtr_mask = 1 << 7;
 	}
@@ -124,12 +128,10 @@
 	__raw_writel(ctrlc, SC_CTRLC);
 }
 
-static struct amba_pl010_data integrator_uart_data = {
+struct amba_pl010_data integrator_uart_data = {
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
 static DEFINE_RAW_SPINLOCK(cm_lock);
 
 /**
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/cpu.c linux-libre-3.7-gnu/arch/arm/mach-integrator/cpu.c
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/cpu.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/cpu.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,10 +25,10 @@
 
 static struct cpufreq_driver integrator_driver;
 
-#define CM_ID  	IO_ADDRESS(INTEGRATOR_HDR_ID)
-#define CM_OSC	IO_ADDRESS(INTEGRATOR_HDR_OSC)
-#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
-#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
+#define CM_ID  	__io_address(INTEGRATOR_HDR_ID)
+#define CM_OSC	__io_address(INTEGRATOR_HDR_OSC)
+#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
+#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
 
 static const struct icst_params lclk_params = {
 	.ref		= 24000000,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/include/mach/cm.h linux-libre-3.7-gnu/arch/arm/mach-integrator/include/mach/cm.h
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/include/mach/cm.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/include/mach/cm.h	2012-12-10 22:30:57.000000000 -0500
@@ -3,6 +3,8 @@
  */
 void cm_control(u32, u32);
 
+#define CM_CTRL	__io_address(INTEGRATOR_HDR_CTRL)
+
 #define CM_CTRL_LED			(1 << 0)
 #define CM_CTRL_nMBDET			(1 << 1)
 #define CM_CTRL_REMAP			(1 << 2)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-integrator/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR        0xe8000000
-#define PCI_CONFIG_VADDR        0xec000000
-#define PCI_V3_VADDR            0xed000000
-#define PCI_IO_VADDR            0xee000000
-
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/include/mach/platform.h linux-libre-3.7-gnu/arch/arm/mach-integrator/include/mach/platform.h
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/include/mach/platform.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/include/mach/platform.h	2012-12-10 22:30:57.000000000 -0500
@@ -324,6 +324,10 @@
  */
 #define PHYS_PCI_V3_BASE                0x62000000
 
+#define PCI_MEMORY_VADDR		IOMEM(0xe8000000)
+#define PCI_CONFIG_VADDR		IOMEM(0xec000000)
+#define PCI_V3_VADDR			IOMEM(0xed000000)
+
 /* ------------------------------------------------------------------------
  *  Integrator Interrupt Controllers
  * ------------------------------------------------------------------------
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/integrator_ap.c linux-libre-3.7-gnu/arch/arm/mach-integrator/integrator_ap.c
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/integrator_ap.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/integrator_ap.c	2012-12-10 22:30:57.000000000 -0500
@@ -34,6 +34,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/clk.h>
 #include <linux/platform_data/clk-integrator.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <video/vga.h>
 
 #include <mach/hardware.h>
@@ -50,6 +53,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
+#include <asm/mach/pci.h>
 #include <asm/mach/time.h>
 
 #include <plat/fpga-irq.h>
@@ -73,7 +77,7 @@
  * e8000000	40000000	PCI memory		PHYS_PCI_MEM_BASE	(max 512M)
  * ec000000	61000000	PCI config space	PHYS_PCI_CONFIG_BASE	(max 16M)
  * ed000000	62000000	PCI V3 regs		PHYS_PCI_V3_BASE	(max 64k)
- * ee000000	60000000	PCI IO			PHYS_PCI_IO_BASE	(max 16M)
+ * fee00000	60000000	PCI IO			PHYS_PCI_IO_BASE	(max 16M)
  * ef000000			Cache flush
  * f1000000	10000000	Core module registers
  * f1100000	11000000	System controller registers
@@ -133,49 +137,28 @@
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= PCI_MEMORY_VADDR,
+		.virtual	= (unsigned long)PCI_MEMORY_VADDR,
 		.pfn		= __phys_to_pfn(PHYS_PCI_MEM_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= PCI_CONFIG_VADDR,
+		.virtual	= (unsigned long)PCI_CONFIG_VADDR,
 		.pfn		= __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= PCI_V3_VADDR,
+		.virtual	= (unsigned long)PCI_V3_VADDR,
 		.pfn		= __phys_to_pfn(PHYS_PCI_V3_BASE),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= PCI_IO_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_IO_BASE),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
 	}
 };
 
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
-	vga_base = PCI_MEMORY_VADDR;
-}
-
-#define INTEGRATOR_SC_VALID_INT	0x003fffff
-
-static void __init ap_init_irq(void)
-{
-	/* Disable all interrupts initially. */
-	/* Do the core module ones */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
-	/* do the header card stuff next */
-	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
-		-1, INTEGRATOR_SC_VALID_INT, NULL);
-	integrator_clk_init(false);
+	vga_base = (unsigned long)PCI_MEMORY_VADDR;
+	pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
 }
 
 #ifdef CONFIG_PM
@@ -270,56 +253,12 @@
 	.set_vpp	= ap_flash_set_vpp,
 };
 
-static struct resource cfi_flash_resource = {
-	.start		= INTEGRATOR_FLASH_BASE,
-	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ap_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &cfi_flash_resource,
-};
-
-static void __init ap_init(void)
-{
-	unsigned long sc_dec;
-	int i;
-
-	platform_device_register(&cfi_flash_device);
-
-	sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
-	for (i = 0; i < 4; i++) {
-		struct lm_device *lmdev;
-
-		if ((sc_dec & (16 << i)) == 0)
-			continue;
-
-		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
-		if (!lmdev)
-			continue;
-
-		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
-		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
-		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
-		lmdev->id = i;
-
-		lm_device_register(lmdev);
-	}
-}
-
 /*
  * Where is the timer (VA)?
  */
-#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
 static unsigned long timer_reload;
 
@@ -328,9 +267,9 @@
 	return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
 }
 
-static void integrator_clocksource_init(unsigned long inrate)
+static void integrator_clocksource_init(unsigned long inrate,
+					void __iomem *base)
 {
-	void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
 	u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 	unsigned long rate = inrate;
 
@@ -347,7 +286,7 @@
 	setup_sched_clock(integrator_read_sched_clock, 16, rate);
 }
 
-static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+static void __iomem * clkevt_base;
 
 /*
  * IRQ handler for the timer
@@ -419,11 +358,13 @@
 	.dev_id		= &integrator_clockevent,
 };
 
-static void integrator_clockevent_init(unsigned long inrate)
+static void integrator_clockevent_init(unsigned long inrate,
+				void __iomem *base, int irq)
 {
 	unsigned long rate = inrate;
 	unsigned int ctrl = 0;
 
+	clkevt_base = base;
 	/* Calculate and program a divisor */
 	if (rate > 0x100000 * HZ) {
 		rate /= 256;
@@ -435,7 +376,7 @@
 	timer_reload = rate / HZ;
 	writel(ctrl, clkevt_base + TIMER_CTRL);
 
-	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+	setup_irq(irq, &integrator_timer_irq);
 	clockevents_config_and_register(&integrator_clockevent,
 					rate,
 					1,
@@ -446,9 +387,153 @@
 {
 }
 
+#ifdef CONFIG_OF
+
+static void __init ap_init_timer_of(void)
+{
+	struct device_node *node;
+	const char *path;
+	void __iomem *base;
+	int err;
+	int irq;
+	struct clk *clk;
+	unsigned long rate;
+
+	clk = clk_get_sys("ap_timer", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	rate = clk_get_rate(clk);
+
+	err = of_property_read_string(of_aliases,
+				"arm,timer-primary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	writel(0, base + TIMER_CTRL);
+	integrator_clocksource_init(rate, base);
+
+	err = of_property_read_string(of_aliases,
+				"arm,timer-secondary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	irq = irq_of_parse_and_map(node, 0);
+	writel(0, base + TIMER_CTRL);
+	integrator_clockevent_init(rate, base, irq);
+}
+
+static struct sys_timer ap_of_timer = {
+	.init		= ap_init_timer_of,
+};
+
+static const struct of_device_id fpga_irq_of_match[] __initconst = {
+	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
+	{ /* Sentinel */ }
+};
+
+static void __init ap_init_irq_of(void)
+{
+	/* disable core module IRQs */
+	writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	of_irq_init(fpga_irq_of_match);
+	integrator_clk_init(false);
+}
+
+/* For the Device Tree, add in the UART callbacks as AUXDATA */
+static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+		"rtc", NULL),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+		"uart0", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+		"uart1", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+		"kmi0", NULL),
+	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+		"kmi1", NULL),
+	OF_DEV_AUXDATA("cfi-flash", INTEGRATOR_FLASH_BASE,
+		"physmap-flash", &ap_flash_data),
+	{ /* sentinel */ },
+};
+
+static void __init ap_init_of(void)
+{
+	unsigned long sc_dec;
+	int i;
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			ap_auxdata_lookup, NULL);
+
+	sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
+	for (i = 0; i < 4; i++) {
+		struct lm_device *lmdev;
+
+		if ((sc_dec & (16 << i)) == 0)
+			continue;
+
+		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+		if (!lmdev)
+			continue;
+
+		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+		lmdev->resource.flags = IORESOURCE_MEM;
+		lmdev->irq = IRQ_AP_EXPINT0 + i;
+		lmdev->id = i;
+
+		lm_device_register(lmdev);
+	}
+}
+
+static const char * ap_dt_board_compat[] = {
+	"arm,integrator-ap",
+	NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
+	.reserve	= integrator_reserve,
+	.map_io		= ap_map_io,
+	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
+	.init_early	= ap_init_early,
+	.init_irq	= ap_init_irq_of,
+	.handle_irq	= fpga_handle_irq,
+	.timer		= &ap_of_timer,
+	.init_machine	= ap_init_of,
+	.restart	= integrator_restart,
+	.dt_compat      = ap_dt_board_compat,
+MACHINE_END
+
+#endif
+
+#ifdef CONFIG_ATAGS
+
 /*
- * Set up timer(s).
+ * This is where non-devicetree initialization code is collected and stashed
+ * for eventual deletion.
  */
+
+static struct resource cfi_flash_resource = {
+	.start		= INTEGRATOR_FLASH_BASE,
+	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cfi_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ap_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cfi_flash_resource,
+};
+
 static void __init ap_init_timer(void)
 {
 	struct clk *clk;
@@ -463,14 +548,62 @@
 	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 
-	integrator_clocksource_init(rate);
-	integrator_clockevent_init(rate);
+	integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
+	integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
+				IRQ_TIMERINT1);
 }
 
 static struct sys_timer ap_timer = {
 	.init		= ap_init_timer,
 };
 
+#define INTEGRATOR_SC_VALID_INT	0x003fffff
+
+static void __init ap_init_irq(void)
+{
+	/* Disable all interrupts initially. */
+	/* Do the core module ones */
+	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+
+	/* do the header card stuff next */
+	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
+	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
+
+	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
+		-1, INTEGRATOR_SC_VALID_INT, NULL);
+	integrator_clk_init(false);
+}
+
+static void __init ap_init(void)
+{
+	unsigned long sc_dec;
+	int i;
+
+	platform_device_register(&cfi_flash_device);
+
+	sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
+	for (i = 0; i < 4; i++) {
+		struct lm_device *lmdev;
+
+		if ((sc_dec & (16 << i)) == 0)
+			continue;
+
+		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+		if (!lmdev)
+			continue;
+
+		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+		lmdev->resource.flags = IORESOURCE_MEM;
+		lmdev->irq = IRQ_AP_EXPINT0 + i;
+		lmdev->id = i;
+
+		lm_device_register(lmdev);
+	}
+
+	integrator_init(false);
+}
+
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
@@ -484,3 +617,5 @@
 	.init_machine	= ap_init,
 	.restart	= integrator_restart,
 MACHINE_END
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/integrator_cp.c linux-libre-3.7-gnu/arch/arm/mach-integrator/integrator_cp.c
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/integrator_cp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/integrator_cp.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,6 +23,9 @@
 #include <linux/gfp.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_data/clk-integrator.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -49,17 +52,10 @@
 #include "common.h"
 
 #define INTCP_PA_FLASH_BASE		0x24000000
-#define INTCP_FLASH_SIZE		SZ_32M
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
-
-#define INTCP_ETH_SIZE			0x10
-
-#define INTCP_VA_CTRL_BASE		IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
+#define INTCP_VA_CTRL_BASE		__io_address(INTEGRATOR_CP_CTL_BASE)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -143,37 +139,6 @@
 	iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
 }
 
-static void __init intcp_init_irq(void)
-{
-	u32 pic_mask, cic_mask, sic_mask;
-
-	/* These masks are for the HW IRQ registers */
-	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
-	pic_mask |= (~((~0u) << (29 - 22))) << 22;
-	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
-	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
-	/*
-	 * Disable all interrupt sources
-	 */
-	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
-		      -1, pic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
-		      -1, cic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		      IRQ_CP_CPPLDINT, sic_mask, NULL);
-	integrator_clk_init(true);
-}
-
 /*
  * Flash handling.
  */
@@ -216,47 +181,6 @@
 	.set_vpp	= intcp_flash_set_vpp,
 };
 
-static struct resource intcp_flash_resource = {
-	.start		= INTCP_PA_FLASH_BASE,
-	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &intcp_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &intcp_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= INTEGRATOR_CP_ETH_BASE,
-		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CP_ETHINT,
-		.end	= IRQ_CP_ETHINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
-	&intcp_flash_device,
-	&smc91x_device,
-};
-
 /*
  * It seems that the card insertion interrupt remains active after
  * we've acknowledged it.  We therefore ignore the interrupt, and
@@ -265,8 +189,8 @@
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
-	writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
+	unsigned int status = readl(__io_address(0xca000000 + 4));
+	writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8));
 
 	return status & 8;
 }
@@ -278,16 +202,6 @@
 	.gpio_cd	= -1,
 };
 
-#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
-	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
-	INTEGRATOR_CP_AACI_IRQS, NULL);
-
-
 /*
  * CLCD support
  */
@@ -338,15 +252,6 @@
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
-	{ IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&mmc_device,
-	&aaci_device,
-	&clcd_device,
-};
-
 #define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
 
 static void __init intcp_init_early(void)
@@ -356,16 +261,193 @@
 #endif
 }
 
-static void __init intcp_init(void)
+#ifdef CONFIG_OF
+
+static void __init intcp_timer_init_of(void)
 {
-	int i;
+	struct device_node *node;
+	const char *path;
+	void __iomem *base;
+	int err;
+	int irq;
 
-	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+	err = of_property_read_string(of_aliases,
+				"arm,timer-primary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	writel(0, base + TIMER_CTRL);
+	sp804_clocksource_init(base, node->name);
 
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
+	err = of_property_read_string(of_aliases,
+				"arm,timer-secondary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	irq = irq_of_parse_and_map(node, 0);
+	writel(0, base + TIMER_CTRL);
+	sp804_clockevents_init(base, irq, node->name);
+}
+
+static struct sys_timer cp_of_timer = {
+	.init		= intcp_timer_init_of,
+};
+
+static const struct of_device_id fpga_irq_of_match[] __initconst = {
+	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
+	{ /* Sentinel */ }
+};
+
+static void __init intcp_init_irq_of(void)
+{
+	of_irq_init(fpga_irq_of_match);
+	integrator_clk_init(true);
+}
+
+/*
+ * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
+ * and enforce the bus names since these are used for clock lookups.
+ */
+static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+		"rtc", NULL),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+		"uart0", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+		"uart1", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+		"kmi0", NULL),
+	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+		"kmi1", NULL),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
+		"mmci", &mmc_data),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
+		"aaci", &mmc_data),
+	OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
+		"clcd", &clcd_data),
+	OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE,
+		"physmap-flash", &intcp_flash_data),
+	{ /* sentinel */ },
+};
+
+static void __init intcp_init_of(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			intcp_auxdata_lookup, NULL);
+}
+
+static const char * intcp_dt_board_compat[] = {
+	"arm,integrator-cp",
+	NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
+	.reserve	= integrator_reserve,
+	.map_io		= intcp_map_io,
+	.nr_irqs	= NR_IRQS_INTEGRATOR_CP,
+	.init_early	= intcp_init_early,
+	.init_irq	= intcp_init_irq_of,
+	.handle_irq	= fpga_handle_irq,
+	.timer		= &cp_of_timer,
+	.init_machine	= intcp_init_of,
+	.restart	= integrator_restart,
+	.dt_compat      = intcp_dt_board_compat,
+MACHINE_END
+
+#endif
+
+#ifdef CONFIG_ATAGS
+
+/*
+ * This is where non-devicetree initialization code is collected and stashed
+ * for eventual deletion.
+ */
+
+#define INTCP_FLASH_SIZE		SZ_32M
+
+static struct resource intcp_flash_resource = {
+	.start		= INTCP_PA_FLASH_BASE,
+	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device intcp_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &intcp_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &intcp_flash_resource,
+};
+
+#define INTCP_ETH_SIZE			0x10
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= INTEGRATOR_CP_ETH_BASE,
+		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CP_ETHINT,
+		.end	= IRQ_CP_ETHINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *intcp_devs[] __initdata = {
+	&intcp_flash_device,
+	&smc91x_device,
+};
+
+#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
+#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
+
+static void __init intcp_init_irq(void)
+{
+	u32 pic_mask, cic_mask, sic_mask;
+
+	/* These masks are for the HW IRQ registers */
+	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
+	pic_mask |= (~((~0u) << (29 - 22))) << 22;
+	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
+	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
+
+	/*
+	 * Disable all interrupt sources
+	 */
+	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
+	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
+	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
+	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
+	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
+	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
+
+	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
+		      -1, pic_mask, NULL);
+
+	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
+		      -1, cic_mask, NULL);
+
+	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
+		      IRQ_CP_CPPLDINT, sic_mask, NULL);
+
+	integrator_clk_init(true);
 }
 
 #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
@@ -386,6 +468,37 @@
 	.init		= intcp_timer_init,
 };
 
+#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
+
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
+	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
+	INTEGRATOR_CP_AACI_IRQS, NULL);
+
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
+	{ IRQ_CP_CLCDCINT }, &clcd_data);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&mmc_device,
+	&aaci_device,
+	&clcd_device,
+};
+
+static void __init intcp_init(void)
+{
+	int i;
+
+	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	integrator_init(true);
+}
+
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
@@ -399,3 +512,5 @@
 	.init_machine	= intcp_init,
 	.restart	= integrator_restart,
 MACHINE_END
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/leds.c linux-libre-3.7-gnu/arch/arm/mach-integrator/leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/leds.c	2012-12-10 22:30:57.000000000 -0500
@@ -1,90 +1,125 @@
 /*
- *  linux/arch/arm/mach-integrator/leds.c
- *
- *  Integrator/AP and Integrator/CP LED control routines
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
+#include <mach/cm.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
 
-static int saved_leds;
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
 
-static void integrator_leds_event(led_event_t ledevt)
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG	(__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
+
+struct integrator_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} integrator_leds[] = {
+	{ "integrator:green0", "heartbeat", },
+	{ "integrator:yellow", },
+	{ "integrator:red", },
+	{ "integrator:green1", },
+	{ "integrator:core_module", "cpu0", },
+};
+
+static void integrator_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	unsigned long flags;
-	const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
-	unsigned int update_alpha_leds;
+	struct integrator_led *led = container_of(cdev,
+						 struct integrator_led, cdev);
+	u32 reg = __raw_readl(LEDREG);
 
-	// yup, change the LEDs
-	local_irq_save(flags);
-	update_alpha_leds = 0;
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
 
-	switch(ledevt) {
-	case led_idle_start:
-		cm_control(CM_CTRL_LED, 0);
-		break;
+	while (__raw_readl(ALPHA_REG) & 1)
+		cpu_relax();
 
-	case led_idle_end:
-		cm_control(CM_CTRL_LED, CM_CTRL_LED);
-		break;
+	__raw_writel(reg, LEDREG);
+}
 
-	case led_timer:
-		saved_leds ^= GREEN_LED;
-		update_alpha_leds = 1;
-		break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+	struct integrator_led *led = container_of(cdev,
+						 struct integrator_led, cdev);
+	u32 reg = __raw_readl(LEDREG);
 
-	case led_red_on:
-		saved_leds |= RED_LED;
-		update_alpha_leds = 1;
-		break;
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
 
-	case led_red_off:
-		saved_leds &= ~RED_LED;
-		update_alpha_leds = 1;
-		break;
+static void cm_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	if (b != LED_OFF)
+		cm_control(CM_CTRL_LED, CM_CTRL_LED);
+	else
+		cm_control(CM_CTRL_LED, 0);
+}
 
-	default:
-		break;
-	}
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+	u32 reg = readl(CM_CTRL);
 
-	if (update_alpha_leds) {
-		while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
-		__raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
-	}
-	local_irq_restore(flags);
+	return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
 }
 
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
 {
-	if (machine_is_integrator() || machine_is_cintegrator())
-		leds_event = integrator_leds_event;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+		struct integrator_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+
+		led->cdev.name = integrator_leds[i].name;
+
+		if (i == 4) { /* Setting for LED in core module */
+			led->cdev.brightness_set = cm_led_set;
+			led->cdev.brightness_get = cm_led_get;
+		} else {
+			led->cdev.brightness_set = integrator_led_set;
+			led->cdev.brightness_get = integrator_led_get;
+		}
+
+		led->cdev.default_trigger = integrator_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
 
 	return 0;
 }
 
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/Makefile linux-libre-3.7-gnu/arch/arm/mach-integrator/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -4,11 +4,10 @@
 
 # Object file lists.
 
-obj-y					:= core.o lm.o
+obj-y					:= core.o lm.o leds.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
-obj-$(CONFIG_LEDS)			+= leds.o
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
 obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-integrator/pci_v3.c linux-libre-3.7-gnu/arch/arm/mach-integrator/pci_v3.c
--- linux-libre-3.6-gnu/arch/arm/mach-integrator/pci_v3.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-integrator/pci_v3.c	2012-12-10 22:30:57.000000000 -0500
@@ -41,61 +41,61 @@
 /*
  * The V3 PCI interface chip in Integrator provides several windows from
  * local bus memory into the PCI memory areas.   Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse 
+ * are not really enough windows for our usage, therefore we reuse
  * one of the windows for access to PCI configuration space.  The
  * memory map is as follows:
- * 
+ *
  * Local Bus Memory         Usage
- * 
+ *
  * 40000000 - 4FFFFFFF      PCI memory.  256M non-prefetchable
  * 50000000 - 5FFFFFFF      PCI memory.  256M prefetchable
  * 60000000 - 60FFFFFF      PCI IO.  16M
  * 61000000 - 61FFFFFF      PCI Configuration. 16M
- * 
+ *
  * There are three V3 windows, each described by a pair of V3 registers.
  * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
  * Base0 and Base1 can be used for any type of PCI memory access.   Base2
  * can be used either for PCI I/O or for I20 accesses.  By default, uHAL
  * uses this only for PCI IO space.
- * 
+ *
  * Normally these spaces are mapped using the following base registers:
- * 
+ *
  * Usage Local Bus Memory         Base/Map registers used
- * 
+ *
  * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
  * Mem   50000000 - 5FFFFFFF      LB_BASE1/LB_MAP1
  * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
  * Cfg   61000000 - 61FFFFFF
- * 
+ *
  * This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI 
+ * When PCI configuration accesses are needed (via the uHAL PCI
  * configuration space primitives) we must remap the spaces as follows:
- * 
+ *
  * Usage Local Bus Memory         Base/Map registers used
- * 
+ *
  * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
  * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0
  * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
  * Cfg   61000000 - 61FFFFFF      LB_BASE1/LB_MAP1
- * 
+ *
  * To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within 
+ * The V3 chip translates an address by checking its range within
  * each of the BASE/MAP pairs in turn (in ascending register number
  * order).  It will use the first matching pair.   So, for example,
  * if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from 
+ * LB_BASE1/LB_MAP1, the V3 will use the translation from
  * LB_BASE0/LB_MAP0.
- * 
+ *
  * To allow PCI Configuration space access, the code enlarges the
  * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M.  This occludes
  * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
  * be remapped for use by configuration cycles.
- * 
- * At the end of the PCI Configuration space accesses, 
+ *
+ * At the end of the PCI Configuration space accesses,
  * LB_BASE1/LB_MAP1 is reset to map PCI Memory.  Finally the window
  * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
  * reveal the now restored LB_BASE1/LB_MAP1 window.
- * 
+ *
  * NOTE: We do not set up I2O mapping.  I suspect that this is only
  * for an intelligent (target) device.  Using I2O disables most of
  * the mappings into PCI memory.
@@ -127,8 +127,8 @@
  *
  * returns:	configuration address to play on the PCI bus
  *
- * To generate the appropriate PCI configuration cycles in the PCI 
- * configuration address space, you present the V3 with the following pattern 
+ * To generate the appropriate PCI configuration cycles in the PCI
+ * configuration address space, you present the V3 with the following pattern
  * (which is very nearly a type 1 (except that the lower two bits are 00 and
  * not 01).   In order for this mapping to work you need to set up one of
  * the local to PCI aperatures to 16Mbytes in length translating to
@@ -138,7 +138,7 @@
  *
  * Type 0:
  *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
@@ -150,7 +150,7 @@
  *
  * Type 1:
  *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
@@ -161,7 +161,7 @@
  *	15:11	Device number (5 bits)
  *	10:8	function number
  *	 7:2	register number
- *  
+ *
  */
 static DEFINE_RAW_SPINLOCK(v3_lock);
 
@@ -181,7 +181,7 @@
 #undef V3_LB_BASE_PREFETCH
 #define V3_LB_BASE_PREFETCH 0
 
-static unsigned long v3_open_config_window(struct pci_bus *bus,
+static void __iomem *v3_open_config_window(struct pci_bus *bus,
 					   unsigned int devfn, int offset)
 {
 	unsigned int address, mapaddress, busnr;
@@ -280,7 +280,7 @@
 static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 			  int size, u32 *val)
 {
-	unsigned long addr;
+	void __iomem *addr;
 	unsigned long flags;
 	u32 v;
 
@@ -311,7 +311,7 @@
 static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 			   int size, u32 val)
 {
-	unsigned long addr;
+	void __iomem *addr;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&v3_lock, flags);
@@ -374,12 +374,9 @@
 	}
 
 	/*
-	 * the IO resource for this bus
 	 * the mem resource for this bus
 	 * the prefetch mem resource for this bus
 	 */
-	pci_add_resource_offset(&sys->resources,
-				&ioport_resource, sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
 
@@ -391,9 +388,9 @@
  * means I can't get additional information on the reason for the pm2fb
  * problems.  I suppose I'll just have to mind-meld with the machine. ;)
  */
-#define SC_PCI     IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
-#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
-#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
+#define SC_PCI     __io_address(INTEGRATOR_SC_PCIENABLE)
+#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20)
+#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24)
 
 static int
 v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
@@ -498,7 +495,6 @@
 	unsigned int temp;
 	int ret;
 
-	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
 
 	/*
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-iop13xx/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,28 +0,0 @@
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __iop13xx_io(a)
-
-extern void __iomem * __iop13xx_io(unsigned long io_addr);
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/include/mach/iop13xx.h linux-libre-3.7-gnu/arch/arm/mach-iop13xx/include/mach/iop13xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/include/mach/iop13xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/include/mach/iop13xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -69,21 +69,11 @@
  * 0x8000.0000 + 928M	0x2.8000.0000   (ioremap)	PCIE outbound memory window
  *
  * IO MAP
- * 0x1000 + 64K	0x0.fffb.1000	0xfec6.1000	PCIX outbound i/o window
- * 0x1000 + 64K	0x0.fffd.1000	0xfed7.1000	PCIE outbound i/o window
+ * 0x00000 + 64K	0x0.fffb.0000	0xfee0.0000	PCIX outbound i/o window
+ * 0x10000 + 64K	0x0.fffd.0000	0xfee1.0000	PCIE outbound i/o window
  */
-#define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
 #define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
-#define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
 #define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
-#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
-#define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIX_LOWER_IO_PA\
-					   - IOP13XX_PCIX_LOWER_IO_VA))
 
 #define IOP13XX_PCIX_MEM_PHYS_OFFSET  0x100000000ULL
 #define IOP13XX_PCIX_MEM_WINDOW_SIZE  0x3a000000UL
@@ -103,20 +93,8 @@
 					IOP13XX_PCIX_LOWER_MEM_BA)
 
 /* PCI-E ranges */
-#define IOP13XX_PCIE_IO_WINDOW_SIZE   	 0x10000UL
 #define IOP13XX_PCIE_LOWER_IO_PA      	 0xfffd0000UL
-#define IOP13XX_PCIE_LOWER_IO_VA      	 0xfed70000UL
-#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0UL  /* OIOTVR */
-#define IOP13XX_PCIE_IO_BUS_OFFSET	 0x1000UL
-#define IOP13XX_PCIE_UPPER_IO_PA      	 (IOP13XX_PCIE_LOWER_IO_PA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_VA      	 (IOP13XX_PCIE_LOWER_IO_VA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_BA      	 (IOP13XX_PCIE_LOWER_IO_BA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIE_LOWER_IO_PA\
-					   - IOP13XX_PCIE_LOWER_IO_VA))
+#define IOP13XX_PCIE_LOWER_IO_BA	 0x10000UL  /* OIOTVR */
 
 #define IOP13XX_PCIE_MEM_PHYS_OFFSET  	 0x200000000ULL
 #define IOP13XX_PCIE_MEM_WINDOW_SIZE  	 0x3a000000UL
@@ -148,18 +126,16 @@
  * IOP13XX chipset registers
  */
 #define IOP13XX_PMMR_PHYS_MEM_BASE	   0xffd80000UL  /* PMMR phys. address */
-#define IOP13XX_PMMR_VIRT_MEM_BASE	   0xfee80000UL  /* PMMR phys. address */
+#define IOP13XX_PMMR_VIRT_MEM_BASE	   (void __iomem *)(0xfee80000UL)  /* PMMR phys. address */
 #define IOP13XX_PMMR_MEM_WINDOW_SIZE	   0x80000
 #define IOP13XX_PMMR_UPPER_MEM_VA	   (IOP13XX_PMMR_VIRT_MEM_BASE +\
 					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
 #define IOP13XX_PMMR_UPPER_MEM_PA	   (IOP13XX_PMMR_PHYS_MEM_BASE +\
 					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (u32) ((u32) addr +\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
-#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (u32) ((u32) addr -\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (((addr) - IOP13XX_PMMR_VIRT_MEM_BASE)\
+					   + IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (((addr) - IOP13XX_PMMR_PHYS_MEM_BASE)\
+					   + IOP13XX_PMMR_VIRT_MEM_BASE)
 #define IOP13XX_REG_ADDR32(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
 #define IOP13XX_REG_ADDR16(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
 #define IOP13XX_REG_ADDR8(reg)      	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
@@ -169,10 +145,10 @@
 #define IOP13XX_PMMR_SIZE		   0x00080000
 
 /*=================== Defines for Platform Devices =====================*/
-#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
-#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
+#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002300)
+#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002340)
+#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002300)
+#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002340)
 
 #define IOP13XX_I2C0_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
 #define IOP13XX_I2C1_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/include/mach/memory.h linux-libre-3.7-gnu/arch/arm/mach-iop13xx/include/mach/memory.h
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/include/mach/memory.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/include/mach/memory.h	2012-12-10 22:30:57.000000000 -0500
@@ -16,12 +16,12 @@
 #define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
 #define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
 
-static inline dma_addr_t __virt_to_lbus(unsigned long x)
+static inline dma_addr_t __virt_to_lbus(void __iomem *x)
 {
 	return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
 }
 
-static inline unsigned long __lbus_to_virt(dma_addr_t x)
+static inline void __iomem *__lbus_to_virt(dma_addr_t x)
 {
 	return x + IOP13XX_PMMR_VIRT_MEM_BASE - IOP13XX_PMMR_PHYS_MEM_BASE;
 }
@@ -38,23 +38,23 @@
 
 #define __arch_dma_to_virt(dev, addr)					\
 	({								\
-		unsigned long __virt;					\
+		void * __virt;						\
 		dma_addr_t __dma = addr;				\
 		if (is_lbus_device(dev) && __is_lbus_dma(__dma))	\
 			__virt = __lbus_to_virt(__dma);			\
 		else							\
-			__virt = __phys_to_virt(__dma);			\
-		(void *)__virt;						\
+			__virt = (void *)__phys_to_virt(__dma);		\
+		__virt;							\
 	})
 
 #define __arch_virt_to_dma(dev, addr)					\
 	({								\
-		unsigned long __virt = (unsigned long)addr;		\
+		void * __virt = addr;					\
 		dma_addr_t __dma;					\
 		if (is_lbus_device(dev) && __is_lbus_virt(__virt))	\
 			__dma = __virt_to_lbus(__virt);			\
 		else							\
-			__dma = __virt_to_phys(__virt);			\
+			__dma = __virt_to_phys((unsigned long)__virt);	\
 		__dma;							\
 	})
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/io.c linux-libre-3.7-gnu/arch/arm/mach-iop13xx/io.c
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/io.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/io.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,25 +23,6 @@
 
 #include "pci.h"
 
-void * __iomem __iop13xx_io(unsigned long io_addr)
-{
-	void __iomem * io_virt;
-
-	switch (io_addr) {
-	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
-		io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr);
-		break;
-	case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
-		io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr);
-		break;
-	default:
-		BUG();
-	}
-
-	return io_virt;
-}
-EXPORT_SYMBOL(__iop13xx_io);
-
 static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
 	size_t size, unsigned int mtype, void *caller)
 {
@@ -52,14 +33,14 @@
 		if (unlikely(!iop13xx_atux_mem_base))
 			retval = NULL;
 		else
-			retval = (void *)(iop13xx_atux_mem_base +
+			retval = (iop13xx_atux_mem_base +
 			         (cookie - IOP13XX_PCIX_LOWER_MEM_RA));
 		break;
 	case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
 		if (unlikely(!iop13xx_atue_mem_base))
 			retval = NULL;
 		else
-			retval = (void *)(iop13xx_atue_mem_base +
+			retval = (iop13xx_atue_mem_base +
 			         (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
 		break;
 	case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
@@ -67,14 +48,8 @@
 				       (cookie - IOP13XX_PBI_LOWER_MEM_RA),
 				       size, mtype, __builtin_return_address(0));
 		break;
-	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
-		retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
-		break;
-	case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
-		retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
-		break;
 	case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
-		retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
+		retval = IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
 		break;
 	default:
 		retval = __arm_ioremap_caller(cookie, size, mtype,
@@ -99,9 +74,7 @@
 		    goto skip;
 
 	switch ((u32) addr) {
-	case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
-	case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
-	case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
+	case (u32)IOP13XX_PMMR_VIRT_MEM_BASE ... (u32)IOP13XX_PMMR_UPPER_MEM_VA:
 		goto skip;
 	}
 	__iounmap(addr);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/iq81340sc.c linux-libre-3.7-gnu/arch/arm/mach-iop13xx/iq81340sc.c
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/iq81340sc.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/iq81340sc.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 extern int init_atu;
 
 static int __init
-iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+iq81340sc_atux_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
 {
 	WARN_ON(idsel < 1 || idsel > 2);
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/pci.c linux-libre-3.7-gnu/arch/arm/mach-iop13xx/pci.c
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/pci.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/pci.c	2012-12-10 22:30:57.000000000 -0500
@@ -36,8 +36,8 @@
 u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
 static struct pci_bus *pci_bus_atux = 0;
 static struct pci_bus *pci_bus_atue = 0;
-u32 iop13xx_atue_mem_base;
-u32 iop13xx_atux_mem_base;
+void __iomem *iop13xx_atue_mem_base;
+void __iomem *iop13xx_atux_mem_base;
 size_t iop13xx_atue_mem_size;
 size_t iop13xx_atux_mem_size;
 
@@ -88,8 +88,7 @@
 				}
 
 				if (end) {
-					iop13xx_atux_mem_base =
-					(u32) __arm_ioremap_pfn(
+					iop13xx_atux_mem_base = __arm_ioremap_pfn(
 					__phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
 					, 0, iop13xx_atux_mem_size, MT_DEVICE);
 					if (!iop13xx_atux_mem_base) {
@@ -99,7 +98,7 @@
 					}
 				} else
 					iop13xx_atux_mem_size = 0;
-				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+				PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
 				__func__, atu, iop13xx_atux_mem_size,
 				iop13xx_atux_mem_base);
 				break;
@@ -114,8 +113,7 @@
 				}
 
 				if (end) {
-					iop13xx_atue_mem_base =
-					(u32) __arm_ioremap_pfn(
+					iop13xx_atue_mem_base = __arm_ioremap_pfn(
 					__phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
 					, 0, iop13xx_atue_mem_size, MT_DEVICE);
 					if (!iop13xx_atue_mem_base) {
@@ -125,13 +123,13 @@
 					}
 				} else
 					iop13xx_atue_mem_size = 0;
-				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+				PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
 				__func__, atu, iop13xx_atue_mem_size,
 				iop13xx_atue_mem_base);
 				break;
 			}
 
-			printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
+			printk("%s: Initialized (%uM @ resource/virtual: %08lx/%p)\n",
 			atu ? "ATUE" : "ATUX",
 			(atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
 			SZ_1M,
@@ -506,7 +504,7 @@
 
 /* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
  */
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	int which_atu;
 	struct pci_bus *bus = NULL;
@@ -970,7 +968,6 @@
 	__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
 
 	/* Setup the Min Address for PCI memory... */
-	pcibios_min_io = 0;
 	pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
 
 	/* if Linux is given control of an ATU
@@ -1003,7 +1000,7 @@
 	if (nr > 1)
 		return 0;
 
-	res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
 	if (!res)
 		panic("PCI: unable to alloc resources");
 
@@ -1042,17 +1039,13 @@
 				  << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
 		__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
 
-		res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
-		res[0].end   = IOP13XX_PCIX_UPPER_IO_PA;
-		res[0].name  = "IQ81340 ATUX PCI I/O Space";
-		res[0].flags = IORESOURCE_IO;
+		pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA);
 
-		res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
-		res[1].end   = IOP13XX_PCIX_UPPER_MEM_RA;
-		res[1].name  = "IQ81340 ATUX PCI Memory Space";
-		res[1].flags = IORESOURCE_MEM;
+		res->start = IOP13XX_PCIX_LOWER_MEM_RA;
+		res->end   = IOP13XX_PCIX_UPPER_MEM_RA;
+		res->name  = "IQ81340 ATUX PCI Memory Space";
+		res->flags = IORESOURCE_MEM;
 		sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
 		break;
 	case IOP13XX_INIT_ATU_ATUE:
 		/* Note: the function number field in the PCSR is ro */
@@ -1063,17 +1056,13 @@
 
 		__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
 
-		res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
-		res[0].end   = IOP13XX_PCIE_UPPER_IO_PA;
-		res[0].name  = "IQ81340 ATUE PCI I/O Space";
-		res[0].flags = IORESOURCE_IO;
+		pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA);
 
-		res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
-		res[1].end   = IOP13XX_PCIE_UPPER_MEM_RA;
-		res[1].name  = "IQ81340 ATUE PCI Memory Space";
-		res[1].flags = IORESOURCE_MEM;
+		res->start = IOP13XX_PCIE_LOWER_MEM_RA;
+		res->end   = IOP13XX_PCIE_UPPER_MEM_RA;
+		res->name  = "IQ81340 ATUE PCI Memory Space";
+		res->flags = IORESOURCE_MEM;
 		sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
 		sys->map_irq = iop13xx_pcie_map_irq;
 		break;
 	default:
@@ -1081,11 +1070,9 @@
 		return 0;
 	}
 
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
+	request_resource(&iomem_resource, res);
 
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
 
 	return 1;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/pci.h linux-libre-3.7-gnu/arch/arm/mach-iop13xx/pci.h
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/pci.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/pci.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,6 +1,6 @@
 #include <linux/types.h>
 
-extern u32 iop13xx_atue_mem_base;
-extern u32 iop13xx_atux_mem_base;
+extern void __iomem *iop13xx_atue_mem_base;
+extern void __iomem *iop13xx_atux_mem_base;
 extern size_t iop13xx_atue_mem_size;
 extern size_t iop13xx_atux_mem_size;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop13xx/setup.c linux-libre-3.7-gnu/arch/arm/mach-iop13xx/setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-iop13xx/setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop13xx/setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -36,20 +36,10 @@
  */
 static struct map_desc iop13xx_std_desc[] __initdata = {
 	{    /* mem mapped registers */
-		.virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
+		.virtual = (unsigned long)IOP13XX_PMMR_VIRT_MEM_BASE,
 		.pfn 	 = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
 		.length  = IOP13XX_PMMR_SIZE,
 		.type	 = MT_DEVICE,
-	}, { /* PCIE IO space */
-		.virtual = IOP13XX_PCIE_LOWER_IO_VA,
-		.pfn 	 = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
-		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
-		.type	 = MT_DEVICE,
-	}, { /* PCIX IO space */
-		.virtual = IOP13XX_PCIX_LOWER_IO_VA,
-		.pfn 	 = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
-		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
-		.type	 = MT_DEVICE,
 	},
 };
 
@@ -81,8 +71,8 @@
 
 static struct plat_serial8250_port iop13xx_uart0_data[] = {
 	{
-       .membase     = (char*)(IOP13XX_UART0_VIRT),
-       .mapbase     = (IOP13XX_UART0_PHYS),
+       .membase     = IOP13XX_UART0_VIRT,
+       .mapbase     = IOP13XX_UART0_PHYS,
        .irq         = IRQ_IOP13XX_UART0,
        .uartclk     = IOP13XX_UART_XTAL,
        .regshift    = 2,
@@ -94,8 +84,8 @@
 
 static struct plat_serial8250_port iop13xx_uart1_data[] = {
 	{
-       .membase     = (char*)(IOP13XX_UART1_VIRT),
-       .mapbase     = (IOP13XX_UART1_PHYS),
+       .membase     = IOP13XX_UART1_VIRT,
+       .mapbase     = IOP13XX_UART1_PHYS,
        .irq         = IRQ_IOP13XX_UART1,
        .uartclk     = IOP13XX_UART_XTAL,
        .regshift    = 2,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop32x/glantank.c linux-libre-3.7-gnu/arch/arm/mach-iop32x/glantank.c
--- linux-libre-3.6-gnu/arch/arm/mach-iop32x/glantank.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop32x/glantank.c	2012-12-10 22:30:57.000000000 -0500
@@ -183,7 +183,7 @@
 
 static void glantank_power_off(void)
 {
-	__raw_writeb(0x01, 0xfe8d0004);
+	__raw_writeb(0x01, IOMEM(0xfe8d0004));
 
 	while (1)
 		;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop32x/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-iop32x/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-iop32x/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop32x/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-iop33x/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-iop33x/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-iop33x/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-iop33x/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/io.h
- *
- * Copyright (C) 2001  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/common.c linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -53,29 +53,26 @@
  *************************************************************************/
 static struct map_desc ixp4xx_io_desc[] __initdata = {
 	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
-		.virtual	= IXP4XX_PERIPHERAL_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
 		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* Expansion Bus Config Registers */
-		.virtual	= IXP4XX_EXP_CFG_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
 		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PCI Registers */
-		.virtual	= IXP4XX_PCI_CFG_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_DEBUG_LL
-	{	/* Debug UART mapping */
-		.virtual	= IXP4XX_DEBUG_UART_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
-		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
+	}, {	/* Queue Manager */
+		.virtual	= (unsigned long)IXP4XX_QMGR_BASE_VIRT,
+		.pfn		= __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
+		.length		= IXP4XX_QMGR_REGION_SIZE,
 		.type		= MT_DEVICE
-	}
-#endif
+	},
 };
 
 void __init ixp4xx_map_io(void)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/common-pci.c linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/common-pci.c
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/common-pci.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/common-pci.c	2012-12-10 22:30:57.000000000 -0500
@@ -410,6 +410,7 @@
 		 * Enable the IO window to be way up high, at 0xfffffc00
 		 */
 		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
+		local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
 	} else {
 		printk("PCI: IXP4xx is target - No bus scan performed\n");
 	}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/goramo_mlr.c linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/goramo_mlr.c
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/goramo_mlr.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/goramo_mlr.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,6 +15,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/pci.h>
+#include <asm/system_info.h>
 
 #define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
 #define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
@@ -329,7 +330,7 @@
 };
 
 
-static struct platform_device *device_tab[6] __initdata = {
+static struct platform_device *device_tab[7] __initdata = {
 	&device_flash,		/* index 0 */
 };
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/cpu.h linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/cpu.h
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/cpu.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/cpu.h	2012-12-10 22:30:57.000000000 -0500
@@ -14,6 +14,7 @@
 #ifndef __ASM_ARCH_CPU_H__
 #define __ASM_ARCH_CPU_H__
 
+#include <linux/io.h>
 #include <asm/cputype.h>
 
 /* Processor id value in CP15 Register 0 */
@@ -37,7 +38,7 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	u32 val = ~*IXP4XX_EXP_CFG2;
+	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
 
 	if (cpu_is_ixp42x_rev_a0())
 		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
@@ -51,7 +52,7 @@
 
 static inline void ixp4xx_write_feature_bits(u32 value)
 {
-	*IXP4XX_EXP_CFG2 = ~value;
+	__raw_writel(~value, IXP4XX_EXP_CFG2);
 }
 
 #endif  /* _ASM_ARCH_CPU_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/debug-macro.S linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/debug-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/debug-macro.S	2012-12-10 22:30:57.000000000 -0500
@@ -17,8 +17,8 @@
 #else
 		mov	\rp, #0
 #endif
-                orr     \rv, \rp, #0xff000000	@ virtual
-		orr	\rv, \rv, #0x00b00000
+		orr	\rv, \rp, #0xfe000000	@ virtual
+		orr	\rv, \rv, #0x00f00000
                 orr     \rp, \rp, #0xc8000000	@ physical
                 .endm
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,2 +0,0 @@
-/* empty */
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h	2012-12-10 22:30:57.000000000 -0500
@@ -30,51 +30,43 @@
  *
  * 0x50000000	0x10000000	ioremap'd	EXP BUS
  *
- * 0x6000000	0x00004000	ioremap'd	QMgr
+ * 0xC8000000	0x00013000	0xFEF00000	On-Chip Peripherals
  *
- * 0xC0000000	0x00001000	0xffbff000	PCI CFG
+ * 0xC0000000	0x00001000	0xFEF13000	PCI CFG
  *
- * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
+ * 0xC4000000	0x00001000	0xFEF14000	EXP CFG
  *
- * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
+ * 0x60000000	0x00004000	0xFEF15000	QMgr
  */
 
 /*
  * Queue Manager
  */
-#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
+#define IXP4XX_QMGR_BASE_PHYS		0x60000000
+#define IXP4XX_QMGR_BASE_VIRT		IOMEM(0xFEF15000)
+#define IXP4XX_QMGR_REGION_SIZE		0x00004000
 
 /*
- * Expansion BUS Configuration registers
+ * Peripheral space, including debug UART. Must be section-aligned so that
+ * it can be used with the low-level debug code.
  */
-#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+#define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
 
 /*
  * PCI Config registers
  */
-#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
+#define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
+#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
 
 /*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
+ * Expansion BUS Configuration registers
  */
-#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
-#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
+#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEF14000
+#define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
 
 #define IXP4XX_EXP_CS0_OFFSET	0x00
 #define IXP4XX_EXP_CS1_OFFSET   0x04
@@ -92,7 +84,7 @@
 /*
  * Expansion Bus Controller registers.
  */
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
 
 #define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
 #define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/qmgr.h linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/qmgr.h
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/include/mach/qmgr.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/include/mach/qmgr.h	2012-12-10 22:30:57.000000000 -0500
@@ -86,7 +86,7 @@
 
 static inline void qmgr_put_entry(unsigned int queue, u32 val)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
 
@@ -99,7 +99,7 @@
 static inline u32 qmgr_get_entry(unsigned int queue)
 {
 	u32 val;
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	val = __raw_readl(&qmgr_regs->acc[queue][0]);
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
@@ -112,14 +112,14 @@
 
 static inline int __qmgr_get_stat1(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
 static inline int __qmgr_get_stat2(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
@@ -145,7 +145,7 @@
  */
 static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statne_h) >>
 			(queue - HALF_QUEUES)) & 0x01;
@@ -172,7 +172,7 @@
  */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statf_h) >>
 			(queue - HALF_QUEUES)) & 0x01;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/ixp4xx_npe.c linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/ixp4xx_npe.c
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2012-09-30 20:50:06.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2012-12-10 22:49:46.000000000 -0500
@@ -116,7 +116,11 @@
 /* NPE mailbox_status value for reset */
 #define RESET_MBOX_STAT			0x0000F0F0
 
-const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+#define NPE_A_FIRMWARE "NPE-A"
+#define NPE_B_FIRMWARE "NPE-B"
+#define NPE_C_FIRMWARE "NPE-C"
+
+const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE };
 
 #define print_npe(pri, npe, fmt, ...)					\
 	printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
@@ -724,6 +728,7 @@
 
 MODULE_AUTHOR("Krzysztof Halasa");
 MODULE_LICENSE("GPL v2");
+/*(DEBLOBBED)*/
 
 EXPORT_SYMBOL(npe_names);
 EXPORT_SYMBOL(npe_running);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c	2012-12-10 22:30:57.000000000 -0500
@@ -14,7 +14,7 @@
 #include <linux/module.h>
 #include <mach/qmgr.h>
 
-struct qmgr_regs __iomem *qmgr_regs;
+static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
@@ -293,12 +293,6 @@
 	if (mem_res == NULL)
 		return -EBUSY;
 
-	qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-	if (qmgr_regs == NULL) {
-		err = -ENOMEM;
-		goto error_map;
-	}
-
 	/* reset qmgr registers */
 	for (i = 0; i < 4; i++) {
 		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
@@ -347,8 +341,6 @@
 error_irq2:
 	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
-	iounmap(qmgr_regs);
-error_map:
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 	return err;
 }
@@ -359,7 +351,6 @@
 	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
 	synchronize_irq(IRQ_IXP4XX_QM2);
-	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
 
@@ -369,7 +360,6 @@
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Krzysztof Halasa");
 
-EXPORT_SYMBOL(qmgr_regs);
 EXPORT_SYMBOL(qmgr_set_irq);
 EXPORT_SYMBOL(qmgr_enable_irq);
 EXPORT_SYMBOL(qmgr_disable_irq);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/Kconfig linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-ixp4xx/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ixp4xx/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -234,8 +234,8 @@
 
 config IXP4XX_NPE
 	tristate "IXP4xx Network Processor Engine support"
-	select HOTPLUG
 	select FW_LOADER
+	select HOTPLUG
 	help
 	  This driver supports IXP4xx built-in network coprocessors
 	  and is automatically selected by Ethernet and HSS drivers.
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/addr-map.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/addr-map.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/addr-map.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/addr-map.c	2012-12-10 22:30:57.000000000 -0500
@@ -86,5 +86,6 @@
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    (void __iomem *) DDR_WINDOW_CPU_BASE);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dnskw.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dnskw.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dnskw.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dnskw.c	2012-12-10 22:30:57.000000000 -0500
@@ -14,18 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
 #include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio-fan.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -67,29 +57,6 @@
 	0
 };
 
-/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-static struct gpio_fan_speed dnskw_fan_speed[] = {
-	{    0,  0 },
-	{ 3000,	 1 },
-	{ 6000,	 2 },
-};
-static unsigned dnskw_fan_pins[] = {46, 45};
-
-static struct gpio_fan_platform_data dnskw_fan_data = {
-	.num_ctrl	= ARRAY_SIZE(dnskw_fan_pins),
-	.ctrl		= dnskw_fan_pins,
-	.num_speed	= ARRAY_SIZE(dnskw_fan_speed),
-	.speed		= dnskw_fan_speed,
-};
-
-static struct platform_device dnskw_fan_device = {
-	.name	= "gpio-fan",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dnskw_fan_data,
-	},
-};
-
 static void dnskw_power_off(void)
 {
 	gpio_set_value(36, 1);
@@ -114,8 +81,6 @@
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&dnskw_ge00_data);
 
-	platform_device_register(&dnskw_fan_device);
-
 	/* Register power-off GPIO. */
 	if (gpio_request(36, "dnskw:power:off") == 0
 	    && gpio_direction_output(36, 0) == 0)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dockstar.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dockstar.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dockstar.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dockstar.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+void __init dockstar_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dreamplug.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dreamplug.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dreamplug.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dreamplug.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dt.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dt.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-dt.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-dt.c	2012-12-10 22:30:57.000000000 -0500
@@ -33,6 +33,7 @@
 	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
 	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
 	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
+	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
 	{},
 };
 
@@ -50,9 +51,7 @@
 
 	kirkwood_setup_cpu_mbus();
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
 	kirkwood_l2_init();
-#endif
 
 	/* Setup root of clk tree */
 	kirkwood_clk_init();
@@ -60,7 +59,6 @@
 	/* internal devices that every board has */
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
-	kirkwood_crypto_init();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
@@ -81,12 +79,21 @@
 	if (of_machine_is_compatible("qnap,ts219"))
 		qnap_dt_ts219_init();
 
+	if (of_machine_is_compatible("seagate,dockstar"))
+		dockstar_dt_init();
+
 	if (of_machine_is_compatible("seagate,goflexnet"))
 		goflexnet_init();
 
 	if (of_machine_is_compatible("buffalo,lsxl"))
 		lsxl_init();
 
+	if (of_machine_is_compatible("iom,ix2-200"))
+		iomega_ix2_200_init();
+
+	if (of_machine_is_compatible("keymile,km_kirkwood"))
+		km_kirkwood_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table,
 			     kirkwood_auxdata_lookup, NULL);
 }
@@ -98,8 +105,11 @@
 	"iom,iconnect",
 	"raidsonic,ib-nas62x0",
 	"qnap,ts219",
+	"seagate,dockstar",
 	"seagate,goflexnet",
 	"buffalo,lsxl",
+	"iom,ix2-200",
+	"keymile,km_kirkwood",
 	NULL
 };
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-goflexnet.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-goflexnet.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-goflexnet.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-goflexnet.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-iconnect.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-iconnect.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-iconnect.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-iconnect.c	2012-12-10 22:30:57.000000000 -0500
@@ -16,11 +16,8 @@
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
@@ -44,57 +41,12 @@
 	0
 };
 
-static struct mtd_partition iconnect_nand_parts[] = {
-	{
-		.name = "flash",
-		.offset = 0,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-/* yikes... theses are the original input buttons */
-/* but I'm not convinced by the sw event choices  */
-static struct gpio_keys_button iconnect_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= SW_LID,
-		.gpio		= 12,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	}, {
-		.type		= EV_SW,
-		.code		= SW_TABLET_MODE,
-		.gpio		= 35,
-		.desc		= "OTB Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-	.buttons	= iconnect_buttons,
-	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev        = {
-		.platform_data  = &iconnect_button_data,
-	},
-};
-
 void __init iconnect_init(void)
 {
 	kirkwood_mpp_conf(iconnect_mpp_config);
-	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&iconnect_ge00_data);
-
-	platform_device_register(&iconnect_button_device);
 }
 
 static int __init iconnect_pci_init(void)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-iomega_ix2_200.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-iomega_ix2_200.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-iomega_ix2_200.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+ *
+ * Iomega StorCenter ix2-200
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
+	.phy_addr       = MV643XX_ETH_PHY_NONE,
+	.speed          = SPEED_1000,
+	.duplex         = DUPLEX_FULL,
+};
+
+static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
+	MPP12_GPIO,			/* Reset Button */
+	MPP14_GPIO,			/* Power Button */
+	MPP15_GPIO,			/* Backup LED (blue) */
+	MPP16_GPIO,			/* Power LED (white) */
+	MPP35_GPIO,			/* OTB Button */
+	MPP36_GPIO,			/* Rebuild LED (white) */
+	MPP37_GPIO,			/* Health LED (red) */
+	MPP38_GPIO,			/* SATA LED brightness control 1 */
+	MPP39_GPIO,			/* SATA LED brightness control 2 */
+	MPP40_GPIO,			/* Backup LED brightness control 1 */
+	MPP41_GPIO,			/* Backup LED brightness control 2 */
+	MPP42_GPIO,			/* Power LED brightness control 1 */
+	MPP43_GPIO,			/* Power LED brightness control 2 */
+	MPP44_GPIO,			/* Health LED brightness control 1 */
+	MPP45_GPIO,			/* Health LED brightness control 2 */
+	MPP46_GPIO,			/* Rebuild LED brightness control 1 */
+	MPP47_GPIO,			/* Rebuild LED brightness control 2 */
+	0
+};
+
+void __init iomega_ix2_200_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-km_kirkwood.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-km_kirkwood.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/board-km_kirkwood.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/board-km_kirkwood.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int km_kirkwood_mpp_config[] __initdata = {
+	MPP8_GPIO,	/* I2C SDA */
+	MPP9_GPIO,	/* I2C SCL */
+	0
+};
+
+void __init km_kirkwood_init(void)
+{
+	struct clk *sata_clk;
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(km_kirkwood_mpp_config);
+
+	/*
+	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
+	 * devices are also not present in this variant, their clocks get
+	 * disabled because unused when clk_disable_unused() gets called.
+	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+	 */
+	sata_clk = clk_get_sys("sata_mv.0", "0");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+	sata_clk = clk_get_sys("sata_mv.0", "1");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/common.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,15 +26,15 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -42,17 +42,7 @@
  ****************************************************************************/
 static struct map_desc kirkwood_io_desc[] __initdata = {
 	{
-		.virtual	= KIRKWOOD_PCIE_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
-		.length		= KIRKWOOD_PCIE_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= KIRKWOOD_PCIE1_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
-		.length		= KIRKWOOD_PCIE1_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
 		.length		= KIRKWOOD_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -215,8 +205,7 @@
 
 static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 {
-	return clk_register_gate(NULL, name, "tclk", 0,
-				 (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				 bit_idx, 0, &gating_lock);
 }
 
@@ -225,8 +214,7 @@
 						    void (*fn_en)(void),
 						    void (*fn_dis)(void))
 {
-	return clk_register_gate_fn(NULL, name, "tclk", 0,
-				    (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				    bit_idx, 0, &gating_lock, fn_en, fn_dis);
 }
 
@@ -645,6 +633,7 @@
 
 void __init kirkwood_l2_init(void)
 {
+#ifdef CONFIG_CACHE_FEROCEON_L2
 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
 	writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
 	feroceon_l2_init(1);
@@ -652,6 +641,7 @@
 	writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
 	feroceon_l2_init(0);
 #endif
+#endif
 }
 
 void __init kirkwood_init(void)
@@ -669,9 +659,7 @@
 
 	kirkwood_setup_cpu_mbus();
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
 	kirkwood_l2_init();
-#endif
 
 	/* Setup root of clk tree */
 	kirkwood_clk_init();
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/common.h linux-libre-3.7-gnu/arch/arm/mach-kirkwood/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -82,6 +82,12 @@
 static inline void ib62x0_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_dt_init(void);
+#else
+static inline void dockstar_dt_init(void) {};
+#endif
+
 #ifdef CONFIG_MACH_GOFLEXNET_DT
 void goflexnet_init(void);
 #else
@@ -94,6 +100,18 @@
 static inline void lsxl_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
+void iomega_ix2_200_init(void);
+#else
+static inline void iomega_ix2_200_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/d2net_v2-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/d2net_v2-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/d2net_v2-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/d2net_v2-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/db88f6281-bp-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/db88f6281-bp-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/db88f6281-bp-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/dockstar-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/dockstar-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/dockstar-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/dockstar-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/guruplug-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/guruplug-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/guruplug-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/guruplug-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/bridge-regs.h linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/bridge-regs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/bridge-regs.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,37 +13,37 @@
 
 #include <mach/kirkwood.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0100)
 #define CPU_CONFIG_ERROR_PROP	0x00000004
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define CPU_RESET		0x00000002
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
 #define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
-#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE + 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
-#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE + 0x11c)
 #define CGC_BIT_GE0		(0)
 #define CGC_BIT_PEX0		(2)
 #define CGC_BIT_USB0		(3)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,9 +0,0 @@
-/*
- * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
-					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/kirkwood.h linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/kirkwood.h
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/kirkwood.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/kirkwood.h	2012-12-10 22:30:57.000000000 -0500
@@ -37,17 +37,15 @@
 #define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
 #define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
-#define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00100000
-#define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE		SZ_64K
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfee00000
 #define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
+#define KIRKWOOD_PCIE_IO_SIZE		SZ_64K
 
 #define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE		IOMEM(0xfed00000)
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
@@ -61,61 +59,61 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE + 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE + 0x1418)
 
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0100)
-#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0140)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0100)
+#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0140)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
 
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
 
-#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x30000)
 
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE + 0x1a04)
 
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x50000)
 
-#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
 
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x74000)
 
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE + 0x4330)
 
-#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x90000)
 
-#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
 
 /*
  * Supported devices and revisions.
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
- *
- * Platform data structure for netxbig LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NETXBIG_H
-#define __MACH_LEDS_NETXBIG_H
-
-struct netxbig_gpio_ext {
-	unsigned	*addr;
-	int		num_addr;
-	unsigned	*data;
-	int		num_data;
-	unsigned	enable;
-};
-
-enum netxbig_led_mode {
-	NETXBIG_LED_OFF,
-	NETXBIG_LED_ON,
-	NETXBIG_LED_SATA,
-	NETXBIG_LED_TIMER1,
-	NETXBIG_LED_TIMER2,
-	NETXBIG_LED_MODE_NUM,
-};
-
-#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
-
-struct netxbig_led_timer {
-	unsigned long		delay_on;
-	unsigned long		delay_off;
-	enum netxbig_led_mode	mode;
-};
-
-struct netxbig_led {
-	const char	*name;
-	const char	*default_trigger;
-	int		mode_addr;
-	int		*mode_val;
-	int		bright_addr;
-};
-
-struct netxbig_led_platform_data {
-	struct netxbig_gpio_ext	*gpio_ext;
-	struct netxbig_led_timer *timer;
-	int			num_timer;
-	struct netxbig_led	*leds;
-	int			num_leds;
-};
-
-#endif /* __MACH_LEDS_NETXBIG_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/leds-ns2.h linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/include/mach/leds-ns2.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/include/mach/leds-ns2.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
- *
- * Platform data structure for Network Space v2 LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NS2_H
-#define __MACH_LEDS_NS2_H
-
-struct ns2_led {
-	const char	*name;
-	const char	*default_trigger;
-	unsigned	cmd;
-	unsigned	slow;
-};
-
-struct ns2_led_platform_data {
-	int		num_leds;
-	struct ns2_led	*leds;
-};
-
-#endif /* __MACH_LEDS_NS2_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/irq.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/irq.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/irq.c	2012-12-10 22:30:57.000000000 -0500
@@ -10,7 +10,9 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
 #include <plat/irq.h>
 
 static int __initdata gpio0_irqs[4] = {
@@ -29,14 +31,14 @@
 
 void __init kirkwood_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-49.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
-	orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/Kconfig linux-libre-3.7-gnu/arch/arm/mach-kirkwood/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -94,6 +94,13 @@
 	  or MV6282. If you have the wrong one, the buttons will not
 	  work.
 
+config MACH_DOCKSTAR_DT
+	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent Dockstar (Flattened Device Tree).
+
 config MACH_GOFLEXNET_DT
 	bool "Seagate GoFlex Net (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -109,6 +116,20 @@
 	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
 	  Flattened Device Tree.
 
+config MACH_IOMEGA_IX2_200_DT
+	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Iomega StorCenter ix2-200 (Flattened Device Tree).
+
+config MACH_KM_KIRKWOOD_DT
+	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/Makefile linux-libre-3.7-gnu/arch/arm/mach-kirkwood/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -26,5 +26,8 @@
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
+obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-kirkwood/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/Makefile.boot	2012-12-10 22:30:57.000000000 -0500
@@ -1,14 +1,3 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
-dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/netspace_v2-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/netspace_v2-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/netspace_v2-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/netspace_v2-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -34,7 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/openrd-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/openrd-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/openrd-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/openrd-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/pcie.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/pcie.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/pcie.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/pcie.c	2012-12-10 22:30:57.000000000 -0500
@@ -47,8 +47,8 @@
 void kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
 	kirkwood_enable_pcie();
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE_VIRT_BASE);
 }
 
 struct pcie_port {
@@ -56,7 +56,7 @@
 	void __iomem		*base;
 	spinlock_t		conf_lock;
 	int			irq;
-	struct resource		res[2];
+	struct resource		res;
 };
 
 static int pcie_port_map[2];
@@ -133,46 +133,30 @@
 
 static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE_VIRT_BASE;
+	pp->base = PCIE_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE;
 
 	/*
-	 * IORESOURCE_IO
-	 */
-	pp->res[0].name = "PCIe 0 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
-	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
-	pp->res[0].flags = IORESOURCE_IO;
-
-	/*
 	 * IORESOURCE_MEM
 	 */
-	pp->res[1].name = "PCIe 0 MEM";
-	pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
-	pp->res[1].flags = IORESOURCE_MEM;
+	pp->res.name = "PCIe 0 MEM";
+	pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+	pp->res.flags = IORESOURCE_MEM;
 }
 
 static void __init pcie1_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+	pp->base = PCIE1_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE1;
 
 	/*
-	 * IORESOURCE_IO
-	 */
-	pp->res[0].name = "PCIe 1 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
-	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
-	pp->res[0].flags = IORESOURCE_IO;
-
-	/*
 	 * IORESOURCE_MEM
 	 */
-	pp->res[1].name = "PCIe 1 MEM";
-	pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
-	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
-	pp->res[1].flags = IORESOURCE_MEM;
+	pp->res.name = "PCIe 1 MEM";
+	pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+	pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+	pp->res.flags = IORESOURCE_MEM;
 }
 
 static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
@@ -197,23 +181,21 @@
 	case 0:
 		kirkwood_enable_pcie_clk("0");
 		pcie0_ioresources_init(pp);
+		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
 		break;
 	case 1:
 		kirkwood_enable_pcie_clk("1");
 		pcie1_ioresources_init(pp);
+		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
 		break;
 	default:
 		panic("PCIe setup: invalid controller %d", index);
 	}
 
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe%d IO resource failed\n", index);
-	if (request_resource(&iomem_resource, &pp->res[1]))
+	if (request_resource(&iomem_resource, &pp->res))
 		panic("Request PCIe%d Memory resource failed\n", index);
 
-	sys->io_offset = 0;
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
 	/*
 	 * Generic PCIe unit setup.
@@ -225,14 +207,19 @@
 	return 1;
 }
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void __devinit rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
@@ -273,11 +260,11 @@
 	.map_irq	= kirkwood_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		printk(KERN_INFO "link up\n");
 		pcie_port_map[num_pcie_ports++] = index;
 	} else
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,6 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
 #include "common.h"
 
 #define RD88F6192_GPIO_USB_VBUS		10
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/rd88f6281-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/rd88f6281-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/rd88f6281-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/rd88f6281-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/sheevaplug-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/sheevaplug-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/sheevaplug-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/sheevaplug-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-kirkwood/ts41x-setup.c linux-libre-3.7-gnu/arch/arm/mach-kirkwood/ts41x-setup.c
--- linux-libre-3.6-gnu/arch/arm/mach-kirkwood/ts41x-setup.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-kirkwood/ts41x-setup.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -161,7 +162,7 @@
 		 * (Marvell 88sx7042/sata_mv) is known to stop working
 		 * after a few minutes.
 		 */
-		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+		orion_pcie_reset(PCIE_VIRT_BASE);
 
 		kirkwood_pcie_id(&dev, &rev);
 		if (dev == MV88F6282_DEV_ID)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/board-og.c linux-libre-3.7-gnu/arch/arm/mach-ks8695/board-og.c
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/board-og.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/board-og.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,199 @@
+/*
+ * board-og.c -- support for the OpenGear KS8695 based boards.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/devices.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-ks8695.h>
+#include "generic.h"
+
+static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (machine_is_im4004() && (slot == 8))
+		return KS8695_IRQ_EXTERN1;
+	return KS8695_IRQ_EXTERN0;
+}
+
+static struct ks8695_pci_cfg __initdata og_pci = {
+	.mode		= KS8695_MODE_PCI,
+	.map_irq	= og_pci_map_irq,
+};
+
+static void __init og_register_pci(void)
+{
+	/* Initialize the GPIO lines for interrupt mode */
+	ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
+
+	/* Cardbus Slot */
+	if (machine_is_im4004())
+		ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
+
+	ks8695_init_pci(&og_pci);
+}
+
+/*
+ * The PCI bus reset is driven by a dedicated GPIO line. Toggle it here
+ * and bring the PCI bus out of reset.
+ */
+static void __init og_pci_bus_reset(void)
+{
+	unsigned int rstline = 1;
+
+	/* Some boards use a different GPIO as the PCI reset line */
+	if (machine_is_im4004())
+		rstline = 2;
+	else if (machine_is_im42xx())
+		rstline = 0;
+
+	gpio_request(rstline, "PCI reset");
+	gpio_direction_output(rstline, 0);
+
+	/* Drive a reset on the PCI reset line */
+	gpio_set_value(rstline, 1);
+	gpio_set_value(rstline, 0);
+	mdelay(100);
+	gpio_set_value(rstline, 1);
+	mdelay(100);
+}
+
+/*
+ * Direct connect serial ports (non-PCI that is).
+ */
+#define	S8250_PHYS	0x03800000
+#define	S8250_VIRT	0xf4000000
+#define	S8250_SIZE	0x00100000
+
+static struct __initdata map_desc og_io_desc[] = {
+	{
+		.virtual	= S8250_VIRT,
+		.pfn		= __phys_to_pfn(S8250_PHYS),
+		.length		= S8250_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+static struct resource og_uart_resources[] = {
+	{
+		.start		= S8250_VIRT,
+		.end		= S8250_VIRT + S8250_SIZE,
+		.flags		= IORESOURCE_MEM
+	},
+};
+
+static struct plat_serial8250_port og_uart_data[] = {
+	{
+		.mapbase	= S8250_VIRT,
+		.membase	= (char *) S8250_VIRT,
+		.irq		= 3,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 115200 * 16,
+	},
+	{ },
+};
+
+static struct platform_device og_uart = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev.platform_data	= og_uart_data,
+	.num_resources		= 1,
+	.resource		= og_uart_resources
+};
+
+static struct platform_device *og_devices[] __initdata = {
+	&og_uart
+};
+
+static void __init og_init(void)
+{
+	ks8695_register_gpios();
+
+	if (machine_is_cm4002()) {
+		ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH);
+		iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc));
+		platform_add_devices(og_devices, ARRAY_SIZE(og_devices));
+	} else {
+		og_pci_bus_reset();
+		og_register_pci();
+	}
+
+	ks8695_add_device_lan();
+	ks8695_add_device_wan();
+}
+
+#ifdef CONFIG_MACH_CM4002
+MACHINE_START(CM4002, "OpenGear/CM4002")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_CM4008
+MACHINE_START(CM4008, "OpenGear/CM4008")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_CM41xx
+MACHINE_START(CM41XX, "OpenGear/CM41xx")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_IM4004
+MACHINE_START(IM4004, "OpenGear/IM4004")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_IM42xx
+MACHINE_START(IM42XX, "OpenGear/IM42xx")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/board-sg.c linux-libre-3.7-gnu/arch/arm/mach-ks8695/board-sg.c
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/board-sg.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/board-sg.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,121 @@
+/*
+ * board-sg.c -- support for the SnapGear KS8695 based boards
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/devices.h>
+#include "generic.h"
+
+/*
+ * The SG310 machine type is fitted with a conventional 8MB Strataflash
+ * device. Define its partitioning.
+ */
+#define	FL_BASE		0x02000000
+#define	FL_SIZE		SZ_8M
+
+static struct mtd_partition sg_mtd_partitions[] = {
+	[0] = {
+		.name	= "SnapGear Boot Loader",
+		.size	= SZ_128K,
+	},
+	[1] = {
+		.name	= "SnapGear non-volatile configuration",
+		.size	= SZ_512K,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "SnapGear image",
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "SnapGear StrataFlash",
+	},
+	[4] = {
+		.name	= "SnapGear Boot Tags",
+		.size	= SZ_128K,
+		.offset	= SZ_128K,
+	},
+};
+
+static struct physmap_flash_data sg_mtd_pdata = {
+	.width		= 1,
+	.nr_parts	= ARRAY_SIZE(sg_mtd_partitions),
+	.parts		= sg_mtd_partitions,
+};
+
+
+static struct resource sg_mtd_resource[] = {
+	[0] = {
+		.start = FL_BASE,
+		.end   = FL_BASE + FL_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sg_mtd_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(sg_mtd_resource),
+	.resource	= sg_mtd_resource,
+	.dev		= {
+		.platform_data = &sg_mtd_pdata,
+	},
+};
+
+static void __init sg_init(void)
+{
+	ks8695_add_device_lan();
+	ks8695_add_device_wan();
+
+	if (machine_is_sg310())
+		platform_device_register(&sg_mtd_device);
+}
+
+#ifdef CONFIG_MACH_LITE300
+MACHINE_START(LITE300, "SecureComputing/SG300")
+	/* SnapGear */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= sg_init,
+	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SG310
+MACHINE_START(SG310, "McAfee/SG310")
+	/* SnapGear */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= sg_init,
+	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SE4200
+MACHINE_START(SE4200, "SecureComputing/SE4200")
+	/* SnapGear */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= sg_init,
+	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
+MACHINE_END
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/cpu.c linux-libre-3.7-gnu/arch/arm/mach-ks8695/cpu.c
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/cpu.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/cpu.c	2012-12-10 22:30:57.000000000 -0500
@@ -36,7 +36,7 @@
 
 static struct __initdata map_desc ks8695_io_desc[] = {
 	{
-		.virtual	= KS8695_IO_VA,
+		.virtual	= (unsigned long)KS8695_IO_VA,
 		.pfn		= __phys_to_pfn(KS8695_IO_PA),
 		.length		= KS8695_IO_SIZE,
 		.type		= MT_DEVICE,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/devices.c linux-libre-3.7-gnu/arch/arm/mach-ks8695/devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -182,27 +182,6 @@
 }
 
 
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	gpio_direction_output(cpu_led, 1);
-	gpio_direction_output(timer_led, 1);
-
-	ks8695_leds_cpu	  = cpu_led;
-	ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
 /* -------------------------------------------------------------------- */
 
 /*
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/devices.h linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/devices.h
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/devices.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/devices.h	2012-12-10 22:30:57.000000000 -0500
@@ -18,11 +18,6 @@
 extern void __init ks8695_add_device_lan(void);
 extern void __init ks8695_add_device_hpna(void);
 
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
  /* PCI */
 #define KS8695_MODE_PCI		0
 #define KS8695_MODE_MINIPCI	1
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/hardware.h linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/hardware.h
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/hardware.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/hardware.h	2012-12-10 22:30:57.000000000 -0500
@@ -33,7 +33,7 @@
  * head debug code as the initial MMU setup only deals in L1 sections.
  */
 #define KS8695_IO_PA		0x03F00000
-#define KS8695_IO_VA		0xF0000000
+#define KS8695_IO_VA		IOMEM(0xF0000000)
 #define KS8695_IO_SIZE		SZ_1M
 
 #define KS8695_PCIMEM_PA	0x60000000
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/memory.h linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/memory.h
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/memory.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/memory.h	2012-12-10 22:30:57.000000000 -0500
@@ -34,7 +34,8 @@
 #define __arch_dma_to_virt(dev, x)	({ (void *) (is_lbus_device(dev) ? \
 					__phys_to_virt(x) : __bus_to_virt(x)); })
 #define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
-					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+					(dma_addr_t)__virt_to_phys((unsigned long)x) \
+					: (dma_addr_t)__virt_to_bus(x); })
 #define __arch_pfn_to_dma(dev, pfn)	\
 	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
 	   if (!is_lbus_device(dev)) \
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/regs-timer.h linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/regs-timer.h
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/regs-timer.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/regs-timer.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
-#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON		(0x00)		/* Timer Control Register */
-#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
-#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
-#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
-#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
-#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
-
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/uncompress.h linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/uncompress.h
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/include/mach/uncompress.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/include/mach/uncompress.h	2012-12-10 22:30:57.000000000 -0500
@@ -19,15 +19,15 @@
 
 static void putc(char c)
 {
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+	while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
 		barrier();
 
-	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+	__raw_writel(c, (void __iomem*)KS8695_UART_PA + KS8695_URTH);
 }
 
 static inline void flush(void)
 {
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+	while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
 		barrier();
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/Kconfig linux-libre-3.7-gnu/arch/arm/mach-ks8695/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -21,6 +21,67 @@
 	  say 'Y' here if you want your kernel to run on the Brivo
 	  Systems LLC, ACS-5000 Master board.
 
+config MACH_LITE300
+	bool "SecureComputing SG300"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  SecureComputing / SnapGear SG300 VPN Internet Router.
+	  See http://www.securecomputing.com for more details.
+
+config MACH_SG310
+	bool "McAfee SG310"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  McAfee / SnapGear SG310 VPN Internet Router.
+	  See http://www.mcafee.com for more details.
+
+config MACH_SE4200
+	bool "SecureComputing SE4200"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  SecureComputing / SnapGear SE4200 Secure Wireless VPN
+	  Internet Router.
+	  See http://www.securecomputing.com for more details.
+
+config MACH_CM4002
+	bool "OpenGear CM4002"
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  CM4002 Secure Access Server. See http://www.opengear.com for
+	  more details.
+
+config MACH_CM4008
+	bool "OpenGear CM4008"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  CM4008 Console Server. See http://www.opengear.com for more
+	  details.
+
+config MACH_CM41xx
+	bool "OpenGear CM41xx"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  CM4016 or CM4048 Console Servers. See http://www.opengear.com for
+	  more details.
+
+config MACH_IM4004
+	bool "OpenGear IM4004"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  IM4004 Secure Access Server. See http://www.opengear.com for
+	  more details.
+
+config MACH_IM42xx
+	bool "OpenGear IM42xx"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  IM4216 or IM4248 Console Servers. See http://www.opengear.com for
+	  more details.
+
 endmenu
 
 endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/leds.c linux-libre-3.7-gnu/arch/arm/mach-ks8695/leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/leds.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,92 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
-	gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
-	gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
-	unsigned long is_off = gpio_get_value(led);
-	if (is_off)
-		ks8695_led_on(led);
-	else
-		ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		ks8695_led_toggle(ks8695_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
-		return -ENODEV;
-
-	leds_event = ks8695_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/Makefile linux-libre-3.7-gnu/arch/arm/mach-ks8695/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -11,10 +11,15 @@
 # PCI support is optional
 obj-$(CONFIG_PCI)		+= pci.o
 
-# LEDs
-obj-$(CONFIG_LEDS)		+= leds.o
-
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
 obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
 obj-$(CONFIG_MACH_ACS5K)	+= board-acs5k.o
+obj-$(CONFIG_MACH_LITE300)	+= board-sg.o
+obj-$(CONFIG_MACH_SG310)	+= board-sg.o
+obj-$(CONFIG_MACH_SE4200)	+= board-sg.o
+obj-$(CONFIG_MACH_CM4002)	+= board-og.o
+obj-$(CONFIG_MACH_CM4008)	+= board-og.o
+obj-$(CONFIG_MACH_CM41xx)	+= board-og.o
+obj-$(CONFIG_MACH_IM4004)	+= board-og.o
+obj-$(CONFIG_MACH_IM42xx)	+= board-og.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-ks8695/time.c linux-libre-3.7-gnu/arch/arm/mach-ks8695/time.c
--- linux-libre-3.6-gnu/arch/arm/mach-ks8695/time.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-ks8695/time.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,53 +25,98 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
-#include <mach/regs-timer.h>
 #include <mach/regs-irq.h>
 
 #include "generic.h"
 
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
+
 /*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
+ * Timer registers
  */
-static unsigned long ks8695_gettimeoffset (void)
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
+#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
+
+/* Timer Control Register */
+#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
+static void ks8695_set_mode(enum clock_event_mode mode,
+			    struct clock_event_device *evt)
 {
-	unsigned long elapsed, tick2, intpending;
+	u32 tmcon;
 
-	/*
-	 * Get the current number of ticks.  Note that there is a race
-	 * condition between us reading the timer and checking for an
-	 * interrupt.  We solve this by ensuring that the counter has not
-	 * reloaded between our two reads.
-	 */
-	elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
-	do {
-		tick2 = elapsed;
-		intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1);
-		elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
-	} while (elapsed > tick2);
+	if (mode == CLOCK_EVT_FEAT_PERIODIC) {
+		u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
+		u32 half = DIV_ROUND_CLOSEST(rate, 2);
 
-	/* Convert to number of ticks expired (not remaining) */
-	elapsed = (CLOCK_TICK_RATE / HZ) - elapsed;
+		/* Disable timer 1 */
+		tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+		tmcon &= ~TMCON_T1EN;
+		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
 
-	/* Is interrupt pending?  If so, then timer has been reloaded already. */
-	if (intpending)
-		elapsed += (CLOCK_TICK_RATE / HZ);
+		/* Both registers need to count down */
+		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
 
-	/* Convert ticks to usecs */
-	return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+		/* Re-enable timer1 */
+		tmcon |= TMCON_T1EN;
+		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+	}
 }
 
+static int ks8695_set_next_event(unsigned long cycles,
+				 struct clock_event_device *evt)
+
+{
+	u32 half = DIV_ROUND_CLOSEST(cycles, 2);
+	u32 tmcon;
+
+	/* Disable timer 1 */
+	tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	tmcon &= ~TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* Both registers need to count down */
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+
+	/* Re-enable timer1 */
+	tmcon |= TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+	return 0;
+}
+
+static struct clock_event_device clockevent_ks8695 = {
+	.name		= "ks8695_t1tc",
+	.rating		= 300, /* Reasonably fast and accurate clock event */
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event	= ks8695_set_next_event,
+	.set_mode	= ks8695_set_mode,
+};
+
 /*
  * IRQ handler for the timer.
  */
 static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &clockevent_ks8695;
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -83,18 +128,22 @@
 
 static void ks8695_timer_setup(void)
 {
-	unsigned long tmout = CLOCK_TICK_RATE / HZ;
 	unsigned long tmcon;
 
-	/* disable timer1 */
-	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	__raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC);
-	__raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD);
+	/* Disable timer 0 and 1 */
+	tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	tmcon &= ~TMCON_T0EN;
+	tmcon &= ~TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
 
-	/* re-enable timer1 */
-	__raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+	/*
+	 * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles
+	 * (one on each counter) maximum 2*2^32, but the API will only
+	 * accept up to a 32bit full word (0xFFFFFFFFU).
+	 */
+	clockevents_config_and_register(&clockevent_ks8695,
+					KS8695_CLOCK_RATE, 2,
+					0xFFFFFFFFU);
 }
 
 static void __init ks8695_timer_init (void)
@@ -107,8 +156,6 @@
 
 struct sys_timer ks8695_timer = {
 	.init		= ks8695_timer_init,
-	.offset		= ks8695_gettimeoffset,
-	.resume		= ks8695_timer_setup,
 };
 
 void ks8695_restart(char mode, const char *cmd)
@@ -119,12 +166,12 @@
 		soft_restart(0);
 
 	/* disable timer0 */
-	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
 
 	/* enable watchdog mode */
-	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+	writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
 
 	/* re-enable timer0 */
-	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/common.c linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -177,25 +177,25 @@
 
 static struct map_desc lpc32xx_io_desc[] __initdata = {
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_AHB0_START),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_AHB0_START),
 		.pfn		= __phys_to_pfn(LPC32XX_AHB0_START),
 		.length		= LPC32XX_AHB0_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_AHB1_START),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_AHB1_START),
 		.pfn		= __phys_to_pfn(LPC32XX_AHB1_START),
 		.length		= LPC32XX_AHB1_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_FABAPB_START),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_FABAPB_START),
 		.pfn		= __phys_to_pfn(LPC32XX_FABAPB_START),
 		.length		= LPC32XX_FABAPB_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_IRAM_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_IRAM_BASE),
 		.pfn		= __phys_to_pfn(LPC32XX_IRAM_BASE),
 		.length		= (LPC32XX_IRAM_BANK_SIZE * 2),
 		.type		= MT_DEVICE
diff -druN linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 #define LPC32XX_GPIO_P1_MAX 24
 #define LPC32XX_GPIO_P2_MAX 13
 #define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPI_P3_MAX 29
 #define LPC32XX_GPO_P3_MAX 24
 
 #define LPC32XX_GPIO_P0_GRP 0
diff -druN linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/include/mach/hardware.h linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/include/mach/hardware.h
--- linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/include/mach/hardware.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/include/mach/hardware.h	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,7 @@
 /*
  * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
  */
-#define IO_ADDRESS(x)	(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
 			 IO_BASE)
 
 #define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
diff -druN linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/irq.c linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/irq.c
--- linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/irq.c	2012-12-10 22:30:57.000000000 -0500
@@ -283,21 +283,25 @@
 	case IRQ_TYPE_EDGE_RISING:
 		/* Rising edge sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 1, 1);
+		__irq_set_handler_locked(d->hwirq, handle_edge_irq);
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
 		/* Falling edge sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 0, 1);
+		__irq_set_handler_locked(d->hwirq, handle_edge_irq);
 		break;
 
 	case IRQ_TYPE_LEVEL_LOW:
 		/* Low level sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 0, 0);
+		__irq_set_handler_locked(d->hwirq, handle_level_irq);
 		break;
 
 	case IRQ_TYPE_LEVEL_HIGH:
 		/* High level sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 1, 0);
+		__irq_set_handler_locked(d->hwirq, handle_level_irq);
 		break;
 
 	/* Other modes are not supported */
@@ -305,9 +309,6 @@
 		return -EINVAL;
 	}
 
-	/* Ok to use the level handler for all types */
-	irq_set_handler(d->hwirq, handle_level_irq);
-
 	return 0;
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/Makefile.boot	2012-12-10 22:30:57.000000000 -0500
@@ -1,5 +1,3 @@
    zreladdr-y	+= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x82000000
-
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff -druN linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/phy3250.c linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/phy3250.c
--- linux-libre-3.6-gnu/arch/arm/mach-lpc32xx/phy3250.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-lpc32xx/phy3250.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,12 +24,9 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 #include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/amba/pl022.h>
 #include <linux/amba/pl08x.h>
 #include <linux/amba/mmci.h>
 #include <linux/of.h>
@@ -37,6 +34,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
+#include <linux/mtd/lpc32xx_slc.h>
+#include <linux/mtd/lpc32xx_mlc.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -156,21 +155,6 @@
 	.remove		= lpc32xx_clcd_remove,
 };
 
-/*
- * AMBA SSP (SPI)
- */
-static struct pl022_ssp_controller lpc32xx_ssp0_data = {
-	.bus_id			= 0,
-	.num_chipselect		= 1,
-	.enable_dma		= 0,
-};
-
-static struct pl022_ssp_controller lpc32xx_ssp1_data = {
-	.bus_id			= 1,
-	.num_chipselect		= 1,
-	.enable_dma		= 0,
-};
-
 static struct pl08x_channel_data pl08x_slave_channels[] = {
 	{
 		.bus_id = "nand-slc",
@@ -223,13 +207,25 @@
 	 * gather, and the MMCI driver doesn't do it this way */
 };
 
+static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
+	.dma_filter = pl08x_filter_id,
+};
+
+static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
+	.dma_filter = pl08x_filter_id,
+};
+
 static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
-	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
+	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
+	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
 	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
 	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
 	OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
 		       &lpc32xx_mmci_data),
+	OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
+		       &lpc32xx_slc_data),
+	OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
+		       &lpc32xx_mlc_data),
 	{ }
 };
 
@@ -253,12 +249,6 @@
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     lpc32xx_auxdata_lookup, NULL);
-
-	/* Register GPIOs used on this board */
-	if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
-		pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
-	else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
-		pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
 }
 
 static char const *lpc32xx_dt_compat[] __initdata = {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/aspenite.c linux-libre-3.7-gnu/arch/arm/mach-mmp/aspenite.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/aspenite.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/aspenite.c	2012-12-10 22:30:57.000000000 -0500
@@ -27,7 +27,7 @@
 #include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 
 #include "common.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/clock-mmp2.c linux-libre-3.7-gnu/arch/arm/mach-mmp/clock-mmp2.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/clock-mmp2.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/clock-mmp2.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,111 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_RTC	APBC_REG(0x000)
+#define APBC_TWSI1	APBC_REG(0x004)
+#define APBC_TWSI2	APBC_REG(0x008)
+#define APBC_TWSI3	APBC_REG(0x00c)
+#define APBC_TWSI4	APBC_REG(0x010)
+#define APBC_KPC	APBC_REG(0x018)
+#define APBC_UART1	APBC_REG(0x02c)
+#define APBC_UART2	APBC_REG(0x030)
+#define APBC_UART3	APBC_REG(0x034)
+#define APBC_GPIO	APBC_REG(0x038)
+#define APBC_PWM0	APBC_REG(0x03c)
+#define APBC_PWM1	APBC_REG(0x040)
+#define APBC_PWM2	APBC_REG(0x044)
+#define APBC_PWM3	APBC_REG(0x048)
+#define APBC_SSP0	APBC_REG(0x04c)
+#define APBC_SSP1	APBC_REG(0x050)
+#define APBC_SSP2	APBC_REG(0x054)
+#define APBC_SSP3	APBC_REG(0x058)
+#define APBC_SSP4	APBC_REG(0x05c)
+#define APBC_SSP5	APBC_REG(0x060)
+#define APBC_TWSI5	APBC_REG(0x07c)
+#define APBC_TWSI6	APBC_REG(0x080)
+#define APBC_UART4	APBC_REG(0x088)
+
+#define APMU_USB	APMU_REG(0x05c)
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_SDH0	APMU_REG(0x054)
+#define APMU_SDH1	APMU_REG(0x058)
+#define APMU_SDH2	APMU_REG(0x0e8)
+#define APMU_SDH3	APMU_REG(0x0ec)
+
+static void sdhc_clk_enable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst  =  __raw_readl(clk->clk_rst);
+	clk_rst |= clk->enable_val;
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst  =  __raw_readl(clk->clk_rst);
+	clk_rst &= ~clk->enable_val;
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+	.enable		= sdhc_clk_enable,
+	.disable	= sdhc_clk_disable,
+};
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 26000000);
+static APBC_CLK(uart2, UART2, 1, 26000000);
+static APBC_CLK(uart3, UART3, 1, 26000000);
+static APBC_CLK(uart4, UART4, 1, 26000000);
+static APBC_CLK(twsi1, TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, TWSI6, 0, 26000000);
+static APBC_CLK(gpio, GPIO, 0, 26000000);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
+
+static struct clk_lookup mmp2_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
+};
+
+void __init mmp2_clk_init(void)
+{
+	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/clock-pxa168.c linux-libre-3.7-gnu/arch/arm/mach-mmp/clock-pxa168.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/clock-pxa168.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/clock-pxa168.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,91 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_UART1	APBC_REG(0x000)
+#define APBC_UART2	APBC_REG(0x004)
+#define APBC_GPIO	APBC_REG(0x008)
+#define APBC_PWM1	APBC_REG(0x00c)
+#define APBC_PWM2	APBC_REG(0x010)
+#define APBC_PWM3	APBC_REG(0x014)
+#define APBC_PWM4	APBC_REG(0x018)
+#define APBC_RTC	APBC_REG(0x028)
+#define APBC_TWSI0	APBC_REG(0x02c)
+#define APBC_KPC	APBC_REG(0x030)
+#define APBC_TWSI1	APBC_REG(0x06c)
+#define APBC_UART3	APBC_REG(0x070)
+#define APBC_SSP1	APBC_REG(0x81c)
+#define APBC_SSP2	APBC_REG(0x820)
+#define APBC_SSP3	APBC_REG(0x84c)
+#define APBC_SSP4	APBC_REG(0x858)
+#define APBC_SSP5	APBC_REG(0x85c)
+
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_LCD	APMU_REG(0x04c)
+#define APMU_ETH	APMU_REG(0x0fc)
+#define APMU_USB	APMU_REG(0x05c)
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 14745600);
+static APBC_CLK(uart2, UART2, 1, 14745600);
+static APBC_CLK(uart3, UART3, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(ssp1, SSP1, 4, 0);
+static APBC_CLK(ssp2, SSP2, 4, 0);
+static APBC_CLK(ssp3, SSP3, 4, 0);
+static APBC_CLK(ssp4, SSP4, 4, 0);
+static APBC_CLK(ssp5, SSP5, 4, 0);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(keypad, KPC, 0, 32000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(eth, ETH, 0x09, 0);
+static APMU_CLK(usb, USB, 0x12, 0);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
+	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
+	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
+	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
+	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
+	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa168_clk_init(void)
+{
+	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/clock-pxa910.c linux-libre-3.7-gnu/arch/arm/mach-mmp/clock-pxa910.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/clock-pxa910.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/clock-pxa910.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,67 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_UART0	APBC_REG(0x000)
+#define APBC_UART1	APBC_REG(0x004)
+#define APBC_GPIO	APBC_REG(0x008)
+#define APBC_PWM1	APBC_REG(0x00c)
+#define APBC_PWM2	APBC_REG(0x010)
+#define APBC_PWM3	APBC_REG(0x014)
+#define APBC_PWM4	APBC_REG(0x018)
+#define APBC_SSP1	APBC_REG(0x01c)
+#define APBC_SSP2	APBC_REG(0x020)
+#define APBC_RTC	APBC_REG(0x028)
+#define APBC_TWSI0	APBC_REG(0x02c)
+#define APBC_KPC	APBC_REG(0x030)
+#define APBC_SSP3	APBC_REG(0x04c)
+#define APBC_TWSI1	APBC_REG(0x06c)
+
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_USB	APMU_REG(0x05c)
+
+static APBC_CLK(uart1, UART0, 1, 14745600);
+static APBC_CLK(uart2, UART1, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(u2o, USB, 0x1b, 480000000);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa910_clk_init(void)
+{
+	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/common.h linux-libre-3.7-gnu/arch/arm/mach-mmp/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -7,3 +7,6 @@
 extern void __init icu_init_irq(void);
 extern void __init mmp_map_io(void);
 extern void mmp_restart(char, const char *);
+extern void __init pxa168_clk_init(void);
+extern void __init pxa910_clk_init(void);
+extern void __init mmp2_clk_init(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/debug-macro.S linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/debug-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/debug-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/debug-macro.S	2012-12-10 22:30:57.000000000 -0500
@@ -9,13 +9,21 @@
  * published by the Free Software Foundation.
  */
 
+#if defined(CONFIG_DEBUG_MMP_UART2)
+#define MMP_UART_OFFSET	0x00017000
+#elif defined(CONFIG_DEBUG_MMP_UART3)
+#define MMP_UART_OFFSET	0x00018000
+#else
+#error "Select uart for DEBUG_LL"
+#endif
+
 #include <mach/addr-map.h>
 
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =APB_PHYS_BASE		@ physical
 		ldr	\rv, =APB_VIRT_BASE		@ virtual
-		orr	\rp, \rp, #0x00017000
-		orr	\rv, \rv, #0x00017000
+		orr	\rp, \rp, #MMP_UART_OFFSET
+		orr	\rv, \rv, #MMP_UART_OFFSET
 		.endm
 
 #define UART_SHIFT	2
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/mmp2.h linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/mmp2.h
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/mmp2.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/mmp2.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/pxa168.h linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/pxa168.h
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/pxa168.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/pxa168.h	2012-12-10 22:30:57.000000000 -0500
@@ -11,9 +11,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/pxa910.h linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/pxa910.h
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/pxa910.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/pxa910.h	2012-12-10 22:30:57.000000000 -0500
@@ -9,7 +9,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,101 +13,6 @@
 
 #include <mach/addr-map.h>
 
-/*
- * APB clock register offsets for PXA168
- */
-#define APBC_PXA168_UART1	APBC_REG(0x000)
-#define APBC_PXA168_UART2	APBC_REG(0x004)
-#define APBC_PXA168_GPIO	APBC_REG(0x008)
-#define APBC_PXA168_PWM1	APBC_REG(0x00c)
-#define APBC_PXA168_PWM2	APBC_REG(0x010)
-#define APBC_PXA168_PWM3	APBC_REG(0x014)
-#define APBC_PXA168_PWM4	APBC_REG(0x018)
-#define APBC_PXA168_RTC		APBC_REG(0x028)
-#define APBC_PXA168_TWSI0	APBC_REG(0x02c)
-#define APBC_PXA168_KPC		APBC_REG(0x030)
-#define APBC_PXA168_TIMERS	APBC_REG(0x034)
-#define APBC_PXA168_AIB		APBC_REG(0x03c)
-#define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
-#define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA168_ASFAR	APBC_REG(0x050)
-#define APBC_PXA168_ASSAR	APBC_REG(0x054)
-#define APBC_PXA168_TWSI1	APBC_REG(0x06c)
-#define APBC_PXA168_UART3	APBC_REG(0x070)
-#define APBC_PXA168_AC97	APBC_REG(0x084)
-#define APBC_PXA168_SSP1	APBC_REG(0x81c)
-#define APBC_PXA168_SSP2	APBC_REG(0x820)
-#define APBC_PXA168_SSP3	APBC_REG(0x84c)
-#define APBC_PXA168_SSP4	APBC_REG(0x858)
-#define APBC_PXA168_SSP5	APBC_REG(0x85c)
-
-/*
- * APB Clock register offsets for PXA910
- */
-#define APBC_PXA910_UART0	APBC_REG(0x000)
-#define APBC_PXA910_UART1	APBC_REG(0x004)
-#define APBC_PXA910_GPIO	APBC_REG(0x008)
-#define APBC_PXA910_PWM1	APBC_REG(0x00c)
-#define APBC_PXA910_PWM2	APBC_REG(0x010)
-#define APBC_PXA910_PWM3	APBC_REG(0x014)
-#define APBC_PXA910_PWM4	APBC_REG(0x018)
-#define APBC_PXA910_SSP1	APBC_REG(0x01c)
-#define APBC_PXA910_SSP2	APBC_REG(0x020)
-#define APBC_PXA910_IPC		APBC_REG(0x024)
-#define APBC_PXA910_RTC		APBC_REG(0x028)
-#define APBC_PXA910_TWSI0	APBC_REG(0x02c)
-#define APBC_PXA910_KPC		APBC_REG(0x030)
-#define APBC_PXA910_TIMERS	APBC_REG(0x034)
-#define APBC_PXA910_TBROT	APBC_REG(0x038)
-#define APBC_PXA910_AIB		APBC_REG(0x03c)
-#define APBC_PXA910_SW_JTAG	APBC_REG(0x040)
-#define APBC_PXA910_TIMERS1	APBC_REG(0x044)
-#define APBC_PXA910_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA910_SSP3	APBC_REG(0x04c)
-#define APBC_PXA910_ASFAR	APBC_REG(0x050)
-#define APBC_PXA910_ASSAR	APBC_REG(0x054)
-
-/*
- * APB Clock register offsets for MMP2
- */
-#define APBC_MMP2_RTC		APBC_REG(0x000)
-#define APBC_MMP2_TWSI1		APBC_REG(0x004)
-#define APBC_MMP2_TWSI2		APBC_REG(0x008)
-#define APBC_MMP2_TWSI3		APBC_REG(0x00c)
-#define APBC_MMP2_TWSI4		APBC_REG(0x010)
-#define APBC_MMP2_ONEWIRE	APBC_REG(0x014)
-#define APBC_MMP2_KPC		APBC_REG(0x018)
-#define APBC_MMP2_TB_ROTARY	APBC_REG(0x01c)
-#define APBC_MMP2_SW_JTAG	APBC_REG(0x020)
-#define APBC_MMP2_TIMERS	APBC_REG(0x024)
-#define APBC_MMP2_UART1		APBC_REG(0x02c)
-#define APBC_MMP2_UART2		APBC_REG(0x030)
-#define APBC_MMP2_UART3		APBC_REG(0x034)
-#define APBC_MMP2_GPIO		APBC_REG(0x038)
-#define APBC_MMP2_PWM0		APBC_REG(0x03c)
-#define APBC_MMP2_PWM1		APBC_REG(0x040)
-#define APBC_MMP2_PWM2		APBC_REG(0x044)
-#define APBC_MMP2_PWM3		APBC_REG(0x048)
-#define APBC_MMP2_SSP0		APBC_REG(0x04c)
-#define APBC_MMP2_SSP1		APBC_REG(0x050)
-#define APBC_MMP2_SSP2		APBC_REG(0x054)
-#define APBC_MMP2_SSP3		APBC_REG(0x058)
-#define APBC_MMP2_SSP4		APBC_REG(0x05c)
-#define APBC_MMP2_SSP5		APBC_REG(0x060)
-#define APBC_MMP2_AIB		APBC_REG(0x064)
-#define APBC_MMP2_ASFAR		APBC_REG(0x068)
-#define APBC_MMP2_ASSAR		APBC_REG(0x06c)
-#define APBC_MMP2_USIM		APBC_REG(0x070)
-#define APBC_MMP2_MPMU		APBC_REG(0x074)
-#define APBC_MMP2_IPC		APBC_REG(0x078)
-#define APBC_MMP2_TWSI5		APBC_REG(0x07c)
-#define APBC_MMP2_TWSI6		APBC_REG(0x080)
-#define APBC_MMP2_TWSI_INTSTS	APBC_REG(0x084)
-#define APBC_MMP2_UART4		APBC_REG(0x088)
-#define APBC_MMP2_RIPC		APBC_REG(0x08c)
-#define APBC_MMP2_THSENS1	APBC_REG(0x090)	/* Thermal Sensor */
-#define APBC_MMP2_THSENS_INTSTS	APBC_REG(0x0a4)
-
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
 #define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/regs-apmu.h linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/regs-apmu.h
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/regs-apmu.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/regs-apmu.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,21 +13,6 @@
 
 #include <mach/addr-map.h>
 
-/* Clock Reset Control */
-#define APMU_IRE	APMU_REG(0x048)
-#define APMU_LCD	APMU_REG(0x04c)
-#define APMU_CCIC	APMU_REG(0x050)
-#define APMU_SDH0	APMU_REG(0x054)
-#define APMU_SDH1	APMU_REG(0x058)
-#define APMU_USB	APMU_REG(0x05c)
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_DMA	APMU_REG(0x064)
-#define APMU_GEU	APMU_REG(0x068)
-#define APMU_BUS	APMU_REG(0x06c)
-#define APMU_SDH2	APMU_REG(0x0e8)
-#define APMU_SDH3	APMU_REG(0x0ec)
-#define APMU_ETH	APMU_REG(0x0fc)
-
 #define APMU_FNCLK_EN	(1 << 4)
 #define APMU_AXICLK_EN	(1 << 3)
 #define APMU_FNRST_DIS	(1 << 1)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/sram.h linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/sram.h
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/include/mach/sram.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/include/mach/sram.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,35 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/include/mach/sram.h
- *
- *  SRAM Memory Management
- *
- *  Copyright (c) 2011 Marvell Semiconductors Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SRAM_H
-#define __ASM_ARCH_SRAM_H
-
-#include <linux/genalloc.h>
-
-/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
-#define SRAM_GRANULARITY	512
-
-enum sram_type {
-	MMP_SRAM_UNDEFINED = 0,
-	MMP_ASRAM,
-	MMP_ISRAM,
-};
-
-struct sram_platdata {
-	char *pool_name;
-	int granularity;
-};
-
-extern struct gen_pool *sram_get_gpool(char *pool_name);
-
-#endif /* __ASM_ARCH_SRAM_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/irq.c linux-libre-3.7-gnu/arch/arm/mach-mmp/irq.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/irq.c	2012-12-10 22:30:57.000000000 -0500
@@ -153,10 +153,8 @@
 		status = readl_relaxed(data->reg_status) & ~mask;
 		if (status == 0)
 			break;
-		n = find_first_bit(&status, BITS_PER_LONG);
-		while (n < BITS_PER_LONG) {
+		for_each_set_bit(n, &status, BITS_PER_LONG) {
 			generic_handle_irq(icu_data[i].virq_base + n);
-			n = find_next_bit(&status, BITS_PER_LONG, n + 1);
 		}
 	}
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/Kconfig linux-libre-3.7-gnu/arch/arm/mach-mmp/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -107,18 +107,21 @@
 
 config CPU_PXA168
 	bool
+	select COMMON_CLK
 	select CPU_MOHAWK
 	help
 	  Select code specific to PXA168
 
 config CPU_PXA910
 	bool
+	select COMMON_CLK
 	select CPU_MOHAWK
 	help
 	  Select code specific to PXA910
 
 config CPU_MMP2
 	bool
+	select COMMON_CLK
 	select CPU_PJ4
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/Makefile linux-libre-3.7-gnu/arch/arm/mach-mmp/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -2,13 +2,19 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o time.o irq.o
+obj-y				+= common.o devices.o time.o irq.o
 
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
 obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= mmp2.o sram.o
 
+ifeq ($(CONFIG_COMMON_CLK), )
+obj-y				+= clock.o
+obj-$(CONFIG_CPU_PXA168)	+= clock-pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= clock-pxa910.o
+obj-$(CONFIG_CPU_MMP2)		+= clock-mmp2.o
+endif
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/mmp2.c linux-libre-3.7-gnu/arch/arm/mach-mmp/mmp2.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/mmp2.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/mmp2.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,7 +20,6 @@
 #include <asm/mach/time.h>
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/dma.h>
@@ -29,7 +28,6 @@
 #include <mach/mmp2.h>
 
 #include "common.h"
-#include "clock.h"
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
@@ -98,95 +96,36 @@
 	mmp2_init_icu();
 }
 
-static void sdhc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst |= clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void sdhc_clk_disable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst &= ~clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-struct clkops sdhc_clk_ops = {
-	.enable		= sdhc_clk_enable,
-	.disable	= sdhc_clk_disable,
-};
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
-static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
-static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
-static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
-static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
-static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
-static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
-static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
-static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
-static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
-
-static APMU_CLK(nand, NAND, 0xbf, 100000000);
-static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
-
-static struct clk_lookup mmp2_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
-	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
-	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
-	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
-};
-
 static int __init mmp2_init(void)
 {
 	if (cpu_is_mmp2()) {
 #ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init();
+		tauros2_init(0);
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(mmp2_addr_map);
 		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
-		clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+		mmp2_clk_init();
 	}
 
 	return 0;
 }
 postcore_initcall(mmp2_init);
 
+#define APBC_TIMERS	APBC_REG(0x024)
+
 static void __init mmp2_timer_init(void)
 {
 	unsigned long clk_rst;
 
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
 
 	/*
 	 * enable bus/functional clock, enable 6.5MHz (divider 4),
 	 * release reset
 	 */
 	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
+	__raw_writel(clk_rst, APBC_TIMERS);
 
 	timer_init(IRQ_MMP2_TIMER1);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/pxa168.c linux-libre-3.7-gnu/arch/arm/mach-mmp/pxa168.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/pxa168.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/pxa168.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,8 +18,8 @@
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
-#include <mach/addr-map.h>
 #include <mach/cputype.h>
+#include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
 #include <mach/regs-apmu.h>
 #include <mach/irqs.h>
@@ -50,62 +50,13 @@
 	icu_init_irq();
 }
 
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
-static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
-static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
-static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
-static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
-static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
-static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
-static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
-static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
-static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
-static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(lcd, LCD, 0x7f, 312000000);
-static APMU_CLK(eth, ETH, 0x09, 0);
-static APMU_CLK(usb, USB, 0x12, 0);
-
-/* device and clock bindings */
-static struct clk_lookup pxa168_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
-	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
-	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
-	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
-	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
-	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
 static int __init pxa168_init(void)
 {
 	if (cpu_is_pxa168()) {
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa168_mfp_addr_map);
 		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+		pxa168_clk_init();
 	}
 
 	return 0;
@@ -114,6 +65,7 @@
 
 /* system timer - clock enabled, 3.25MHz */
 #define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS	APBC_REG(0x34)
 
 static void __init pxa168_timer_init(void)
 {
@@ -121,10 +73,10 @@
 	 * ourselves instead of using clk_* API. Clock rate is defined
 	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
 	 */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
 
 	/* 3.25MHz, bus/functional clock enabled, release reset */
-	__raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
 	timer_init(IRQ_PXA168_TIMER1);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/pxa910.c linux-libre-3.7-gnu/arch/arm/mach-mmp/pxa910.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/pxa910.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/pxa910.c	2012-12-10 22:30:57.000000000 -0500
@@ -14,10 +14,10 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/time.h>
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/dma.h>
@@ -25,7 +25,6 @@
 #include <mach/devices.h>
 
 #include "common.h"
-#include "clock.h"
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
@@ -82,44 +81,16 @@
 	icu_init_irq();
 }
 
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
-static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
-static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
-static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(u2o, USB, 0x1b, 480000000);
-
-/* device and clock bindings */
-static struct clk_lookup pxa910_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
 static int __init pxa910_init(void)
 {
 	if (cpu_is_pxa910()) {
+#ifdef CONFIG_CACHE_TAUROS2
+		tauros2_init(0);
+#endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa910_mfp_addr_map);
 		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+		pxa910_clk_init();
 	}
 
 	return 0;
@@ -128,12 +99,13 @@
 
 /* system timer - clock enabled, 3.25MHz */
 #define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS	APBC_REG(0x34)
 
 static void __init pxa910_timer_init(void)
 {
 	/* reset and configure */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
-	__raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
+	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
 	timer_init(IRQ_PXA910_AP1_TIMER1);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/sram.c linux-libre-3.7-gnu/arch/arm/mach-mmp/sram.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/sram.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/sram.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,7 +22,7 @@
 #include <linux/slab.h>
 #include <linux/genalloc.h>
 
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
 
 struct sram_bank_info {
 	char *pool_name;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/teton_bga.c linux-libre-3.7-gnu/arch/arm/mach-mmp/teton_bga.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/teton_bga.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/teton_bga.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/i2c.h>
 
 #include <asm/mach-types.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mmp/ttc_dkb.c linux-libre-3.7-gnu/arch/arm/mach-mmp/ttc_dkb.c
--- linux-libre-3.6-gnu/arch/arm/mach-mmp/ttc_dkb.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mmp/ttc_dkb.c	2012-12-10 22:30:57.000000000 -0500
@@ -177,12 +177,22 @@
 #endif
 #endif
 
+#ifdef CONFIG_MTD_NAND_PXA3xx
+static struct pxa3xx_nand_platform_data dkb_nand_info = {
+	.enable_arbiter = 1,
+	.num_cs = 1,
+};
+#endif
+
 static void __init ttc_dkb_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+#ifdef CONFIG_MTD_NAND_PXA3xx
+	pxa910_add_nand(&dkb_nand_info);
+#endif
 
 	/* off-chip devices */
 	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/acpuclock-arm11.c linux-libre-3.7-gnu/arch/arm/mach-msm/acpuclock-arm11.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/acpuclock-arm11.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/acpuclock-arm11.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,525 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.c
- *
- * MSM architecture clock driver
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "proc_comm.h"
-#include "acpuclock.h"
-
-
-#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
-#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
-#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
-
-/*
- * ARM11 clock configuration for specific ACPU speeds
- */
-
-#define ACPU_PLL_TCXO	-1
-#define ACPU_PLL_0	0
-#define ACPU_PLL_1	1
-#define ACPU_PLL_2	2
-#define ACPU_PLL_3	3
-
-#define PERF_SWITCH_DEBUG 0
-#define PERF_SWITCH_STEP_DEBUG 0
-
-struct clock_state
-{
-	struct clkctl_acpu_speed	*current_speed;
-	struct mutex			lock;
-	uint32_t			acpu_switch_time_us;
-	uint32_t			max_speed_delta_khz;
-	uint32_t			vdd_switch_time_us;
-	unsigned long			power_collapse_khz;
-	unsigned long			wait_for_irq_khz;
-};
-
-static struct clk *ebi1_clk;
-static struct clock_state drv_state = { 0 };
-
-static void __init acpuclk_init(void);
-
-/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
-enum {
-	VDD_0 = 0,
-	VDD_1 = 1,
-	VDD_2 = 2,
-	VDD_3 = 3,
-	VDD_4 = 3,
-	VDD_5 = 3,
-	VDD_6 = 3,
-	VDD_7 = 7,
-	VDD_END
-};
-
-struct clkctl_acpu_speed {
-	unsigned int	a11clk_khz;
-	int		pll;
-	unsigned int	a11clk_src_sel;
-	unsigned int	a11clk_src_div;
-	unsigned int	ahbclk_khz;
-	unsigned int	ahbclk_div;
-	int		vdd;
-	unsigned int 	axiclk_khz;
-	unsigned long	lpj; /* loops_per_jiffy */
-/* Index in acpu_freq_tbl[] for steppings. */
-	short		down;
-	short		up;
-};
-
-/*
- * ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initialize loops_per_jiffy to 0.
- *
- * Table stepping up/down is optimized for 256mhz jumps while staying on the
- * same PLL.
- */
-#if (0)
-static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
-	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },
-	{ 61440, ACPU_PLL_0,  4, 3, 61440,  0, VDD_0, 30720,  0, 0, 8 },
-	{ 81920, ACPU_PLL_0,  4, 2, 40960,  1, VDD_0, 61440,  0, 0, 8 },
-	{ 96000, ACPU_PLL_1,  1, 7, 48000,  1, VDD_0, 61440,  0, 0, 9 },
-	{ 122880, ACPU_PLL_0, 4, 1, 61440,  1, VDD_3, 61440,  0, 0, 8 },
-	{ 128000, ACPU_PLL_1, 1, 5, 64000,  1, VDD_3, 61440,  0, 0, 12 },
-	{ 176000, ACPU_PLL_2, 2, 5, 88000,  1, VDD_3, 61440,  0, 0, 11 },
-	{ 192000, ACPU_PLL_1, 1, 3, 64000,  2, VDD_3, 61440,  0, 0, 12 },
-	{ 245760, ACPU_PLL_0, 4, 0, 81920,  2, VDD_4, 61440,  0, 0, 12 },
-	{ 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },
-	{ 264000, ACPU_PLL_2, 2, 3, 88000,  2, VDD_5, 128000, 0, 6, 13 },
-	{ 352000, ACPU_PLL_2, 2, 2, 88000,  3, VDD_5, 128000, 0, 6, 13 },
-	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },
-	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#else /* Table of freq we currently use. */
-static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
-	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
-	{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
-	{ 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },
-	{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },
-	{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },
-	{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },
-	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },
-	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#endif
-
-
-#ifdef CONFIG_CPU_FREQ_TABLE
-static struct cpufreq_frequency_table freq_table[] = {
-	{ 0, 122880 },
-	{ 1, 128000 },
-	{ 2, 245760 },
-	{ 3, 384000 },
-	{ 4, 528000 },
-	{ 5, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int pc_pll_request(unsigned id, unsigned on)
-{
-	int res;
-	on = !!on;
-
-#if PERF_SWITCH_DEBUG
-	if (on)
-		printk(KERN_DEBUG "Enabling PLL %d\n", id);
-	else
-		printk(KERN_DEBUG "Disabling PLL %d\n", id);
-#endif
-
-	res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
-	if (res < 0)
-		return res;
-
-#if PERF_SWITCH_DEBUG
-	if (on)
-		printk(KERN_DEBUG "PLL %d enabled\n", id);
-	else
-		printk(KERN_DEBUG "PLL %d disabled\n", id);
-#endif
-	return res;
-}
-
-
-/*----------------------------------------------------------------------------
- * ARM11 'owned' clock control
- *---------------------------------------------------------------------------*/
-
-unsigned long acpuclk_power_collapse(void) {
-	int ret = acpuclk_get_rate();
-	ret *= 1000;
-	if (ret > drv_state.power_collapse_khz)
-		acpuclk_set_rate(drv_state.power_collapse_khz, 1);
-	return ret;
-}
-
-unsigned long acpuclk_get_wfi_rate(void)
-{
-	return drv_state.wait_for_irq_khz;
-}
-
-unsigned long acpuclk_wait_for_irq(void) {
-	int ret = acpuclk_get_rate();
-	ret *= 1000;
-	if (ret > drv_state.wait_for_irq_khz)
-		acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);
-	return ret;
-}
-
-static int acpuclk_set_vdd_level(int vdd)
-{
-	uint32_t current_vdd;
-
-	current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",
-	       current_vdd, vdd);
-#endif
-	writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);
-	udelay(drv_state.vdd_switch_time_us);
-	if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {
-#if PERF_SWITCH_DEBUG
-		printk(KERN_ERR "acpuclock: VDD set failed\n");
-#endif
-		return -EIO;
-	}
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "acpuclock: VDD switched\n");
-#endif
-	return 0;
-}
-
-/* Set proper dividers for the given clock speed. */
-static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {
-	uint32_t reg_clkctl, reg_clksel, clk_div;
-
-	/* AHB_CLK_DIV */
-	clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;
-	/*
-	 * If the new clock divider is higher than the previous, then
-	 * program the divider before switching the clock
-	 */
-	if (hunt_s->ahbclk_div > clk_div) {
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~(0x3 << 1);
-		reg_clksel |= (hunt_s->ahbclk_div << 1);
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-	if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {
-		/* SRC0 */
-
-		/* Program clock source */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0x07 << 4);
-		reg_clkctl |= (hunt_s->a11clk_src_sel << 4);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock divider */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~0xf;
-		reg_clkctl |= hunt_s->a11clk_src_div;
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock source selection */
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel |= 1; /* CLK_SEL_SRC1NO  == SRC1 */
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	} else {
-		/* SRC1 */
-
-		/* Program clock source */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0x07 << 12);
-		reg_clkctl |= (hunt_s->a11clk_src_sel << 12);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock divider */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0xf << 8);
-		reg_clkctl |= (hunt_s->a11clk_src_div << 8);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock source selection */
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~1; /* CLK_SEL_SRC1NO  == SRC0 */
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-
-	/*
-	 * If the new clock divider is lower than the previous, then
-	 * program the divider after switching the clock
-	 */
-	if (hunt_s->ahbclk_div < clk_div) {
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~(0x3 << 1);
-		reg_clksel |= (hunt_s->ahbclk_div << 1);
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-}
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
-{
-	uint32_t reg_clkctl;
-	struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;
-	int rc = 0;
-	unsigned int plls_enabled = 0, pll;
-
-	strt_s = cur_s = drv_state.current_speed;
-
-	WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");
-	if (cur_s == NULL)
-		return -ENOENT;
-
-	if (rate == (cur_s->a11clk_khz * 1000))
-		return 0;
-
-	for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {
-		if (tgt_s->a11clk_khz == (rate / 1000))
-			break;
-	}
-
-	if (tgt_s->a11clk_khz == 0)
-		return -EINVAL;
-
-	/* Choose the highest speed speed at or below 'rate' with same PLL. */
-	if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {
-		while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)
-			tgt_s--;
-	}
-
-	if (strt_s->pll != ACPU_PLL_TCXO)
-		plls_enabled |= 1 << strt_s->pll;
-
-	if (!for_power_collapse) {
-		mutex_lock(&drv_state.lock);
-		if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {
-			rc = pc_pll_request(tgt_s->pll, 1);
-			if (rc < 0) {
-				pr_err("PLL%d enable failed (%d)\n",
-					tgt_s->pll, rc);
-				goto out;
-			}
-			plls_enabled |= 1 << tgt_s->pll;
-		}
-		/* Increase VDD if needed. */
-		if (tgt_s->vdd > cur_s->vdd) {
-			if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {
-				printk(KERN_ERR "Unable to switch ACPU vdd\n");
-				goto out;
-			}
-		}
-	}
-
-	/* Set wait states for CPU between frequency changes */
-	reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-	reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
-	writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",
-	       strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);
-#endif
-
-	while (cur_s != tgt_s) {
-		/*
-		 * Always jump to target freq if within 256mhz, regulardless of
-		 * PLL. If differnece is greater, use the predefinied
-		 * steppings in the table.
-		 */
-		int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));
-		if (d > drv_state.max_speed_delta_khz) {
-			/* Step up or down depending on target vs current. */
-			int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?
-				cur_s->up : cur_s->down;
-			if (clk_index < 0) { /* This should not happen. */
-				printk(KERN_ERR "cur:%u target: %u\n",
-					cur_s->a11clk_khz, tgt_s->a11clk_khz);
-				rc = -EINVAL;
-				goto out;
-			}
-			cur_s = &acpu_freq_tbl[clk_index];
-		} else {
-			cur_s = tgt_s;
-		}
-#if PERF_SWITCH_STEP_DEBUG
-		printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",
-			__FUNCTION__, cur_s->a11clk_khz, cur_s->pll);
-#endif
-		if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO
-		    && !(plls_enabled & (1 << cur_s->pll))) {
-			rc = pc_pll_request(cur_s->pll, 1);
-			if (rc < 0) {
-				pr_err("PLL%d enable failed (%d)\n",
-					cur_s->pll, rc);
-				goto out;
-			}
-			plls_enabled |= 1 << cur_s->pll;
-		}
-
-		acpuclk_set_div(cur_s);
-		drv_state.current_speed = cur_s;
-		/* Re-adjust lpj for the new clock speed. */
-		loops_per_jiffy = cur_s->lpj;
-		udelay(drv_state.acpu_switch_time_us);
-	}
-
-	/* Nothing else to do for power collapse. */
-	if (for_power_collapse)
-		return 0;
-
-	/* Disable PLLs we are not using anymore. */
-	plls_enabled &= ~(1 << tgt_s->pll);
-	for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)
-		if (plls_enabled & (1 << pll)) {
-			rc = pc_pll_request(pll, 0);
-			if (rc < 0) {
-				pr_err("PLL%d disable failed (%d)\n", pll, rc);
-				goto out;
-			}
-		}
-
-	/* Change the AXI bus frequency if we can. */
-	if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {
-		rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);
-		if (rc < 0)
-			pr_err("Setting AXI min rate failed!\n");
-	}
-
-	/* Drop VDD level if we can. */
-	if (tgt_s->vdd < strt_s->vdd) {
-		if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)
-			printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");
-	}
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);
-#endif
-out:
-	if (!for_power_collapse)
-		mutex_unlock(&drv_state.lock);
-	return rc;
-}
-
-static void __init acpuclk_init(void)
-{
-	struct clkctl_acpu_speed *speed;
-	uint32_t div, sel;
-	int rc;
-
-	/*
-	 * Determine the rate of ACPU clock
-	 */
-
-	if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */
-		/* CLK_SRC0_SEL */
-		sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;
-		/* CLK_SRC0_DIV */
-		div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;
-	} else {
-		/* CLK_SRC1_SEL */
-		sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;
-		/* CLK_SRC1_DIV */
-		div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;
-	}
-
-	for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {
-		if (speed->a11clk_src_sel == sel
-		 && (speed->a11clk_src_div == div))
-			break;
-	}
-	if (speed->a11clk_khz == 0) {
-		printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");
-		return;
-	}
-
-	drv_state.current_speed = speed;
-
-	rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);
-	if (rc < 0)
-		pr_err("Setting AXI min rate failed!\n");
-
-	printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);
-}
-
-unsigned long acpuclk_get_rate(void)
-{
-	WARN_ONCE(drv_state.current_speed == NULL,
-		  "acpuclk_get_rate: not initialized\n");
-	if (drv_state.current_speed)
-		return drv_state.current_speed->a11clk_khz;
-	else
-		return 0;
-}
-
-uint32_t acpuclk_get_switch_time(void)
-{
-	return drv_state.acpu_switch_time_us;
-}
-
-/*----------------------------------------------------------------------------
- * Clock driver initialization
- *---------------------------------------------------------------------------*/
-
-/* Initialize the lpj field in the acpu_freq_tbl. */
-static void __init lpj_init(void)
-{
-	int i;
-	const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;
-	for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {
-		acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,
-						base_clk->a11clk_khz,
-						acpu_freq_tbl[i].a11clk_khz);
-	}
-}
-
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)
-{
-	pr_info("acpu_clock_init()\n");
-
-	ebi1_clk = clk_get(NULL, "ebi1_clk");
-
-	mutex_init(&drv_state.lock);
-	drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;
-	drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;
-	drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;
-	drv_state.power_collapse_khz = clkdata->power_collapse_khz;
-	drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;
-	acpuclk_init();
-	lpj_init();
-#ifdef CONFIG_CPU_FREQ_TABLE
-	cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());
-#endif
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/acpuclock.h linux-libre-3.7-gnu/arch/arm/mach-msm/acpuclock.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/acpuclock.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/acpuclock.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,32 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.h
- *
- * MSM architecture clock driver header
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse);
-unsigned long acpuclk_get_rate(void);
-uint32_t acpuclk_get_switch_time(void);
-unsigned long acpuclk_wait_for_irq(void);
-unsigned long acpuclk_power_collapse(void);
-unsigned long acpuclk_get_wfi_rate(void);
-
-
-#endif
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-dt-8660.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-dt-8660.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-dt-8660.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-dt-8660.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,64 @@
+/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+
+static void __init msm8x60_init_irq(void)
+{
+	of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm8x60_init_late(void)
+{
+	smd_debugfs_init();
+}
+
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+	{}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+	"qcom,msm8660-fluid",
+	"qcom,msm8660-surf",
+	NULL
+};
+
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+	.smp = smp_ops(msm_smp_ops),
+	.map_io = msm_map_msm8x60_io,
+	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
+	.init_machine = msm8x60_dt_init,
+	.init_late = msm8x60_init_late,
+	.timer = &msm_dt_timer,
+	.dt_compat = msm8x60_fluid_match,
+MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-dt-8960.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-dt-8960.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-dt-8960.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-dt-8960.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,50 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+	{ .compatible = "qcom,msm-qgic2", .data = gic_of_init },
+	{ }
+};
+
+static void __init msm_dt_init_irq(void)
+{
+	of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const msm8960_dt_match[] __initconst = {
+	"qcom,msm8960-cdp",
+	NULL
+};
+
+DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+	.smp = smp_ops(msm_smp_ops),
+	.map_io = msm_map_msm8960_io,
+	.init_irq = msm_dt_init_irq,
+	.timer = &msm_dt_timer,
+	.init_machine = msm_dt_init,
+	.dt_compat = msm8960_dt_match,
+	.handle_irq = gic_handle_irq,
+MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-halibut.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-halibut.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-halibut.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-halibut.c	2012-12-10 22:30:57.000000000 -0500
@@ -36,6 +36,7 @@
 #include <linux/mtd/partitions.h>
 
 #include "devices.h"
+#include "common.h"
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -66,8 +67,6 @@
 	&smc91x_device,
 };
 
-extern struct sys_timer msm_timer;
-
 static void __init halibut_init_early(void)
 {
 	arch_ioremap_caller = __msm_ioremap_caller;
@@ -107,5 +106,5 @@
 	.init_irq	= halibut_init_irq,
 	.init_machine	= halibut_init,
 	.init_late	= halibut_init_late,
-	.timer		= &msm_timer,
+	.timer		= &msm7x01_timer,
 MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-mahimahi.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-mahimahi.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-mahimahi.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-mahimahi.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,6 @@
 
 #include <mach/board.h>
 #include <mach/hardware.h>
-#include <mach/system.h>
 
 #include "board-mahimahi.h"
 #include "devices.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm7x27.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm7x27.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm7x27.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm7x27.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/power_supply.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-#ifdef CONFIG_CACHE_L2X0
-#include <asm/hardware/cache-l2x0.h>
-#endif
-
-#include <mach/vreg.h>
-#include <mach/mpp.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "socinfo.h"
-#include "clock.h"
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x9C004300,
-		.end	= 0x9C0043ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSM_GPIO_TO_INT(132),
-		.end	= MSM_GPIO_TO_INT(132),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_dmov,
-	&msm_device_nand,
-	&smc91x_device,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init msm7x2x_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init msm7x2x_init(void)
-{
-	if (socinfo_init() < 0)
-		BUG();
-
-	if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
-		smc91x_resources[0].start = 0x98000300;
-		smc91x_resources[0].end = 0x980003ff;
-		smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
-		smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
-		if (gpio_tlmm_config(GPIO_CFG(85, 0,
-					      GPIO_INPUT,
-					      GPIO_PULL_DOWN,
-					      GPIO_2MA),
-				     GPIO_ENABLE)) {
-			printk(KERN_ERR
-			       "%s: Err: Config GPIO-85 INT\n",
-				__func__);
-		}
-	}
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x2x_map_io(void)
-{
-	msm_map_common_io();
-	/* Technically dependent on the SoC but using machine_is
-	 * macros since socinfo is not available this early and there
-	 * are plans to restructure the code which will eliminate the
-	 * need for socinfo.
-	 */
-	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
-		msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
-
-	if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
-		msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
-
-#ifdef CONFIG_CACHE_L2X0
-	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
-		/* 7x27 has 256KB L2 cache:
-			64Kb/Way and 4-Way Associativity;
-			R/W latency: 3 cycles;
-			evmon/parity/share disabled. */
-		l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
-	}
-#endif
-}
-
-static void __init msm7x2x_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm7x30.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm7x30.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm7x30.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm7x30.c	2012-12-10 22:30:57.000000000 -0500
@@ -38,8 +38,7 @@
 #include "devices.h"
 #include "gpiomux.h"
 #include "proc_comm.h"
-
-extern struct sys_timer msm_timer;
+#include "common.h"
 
 static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
 		struct meminfo *mi)
@@ -132,7 +131,7 @@
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm_timer,
+	.timer = &msm7x30_timer,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
@@ -143,7 +142,7 @@
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm_timer,
+	.timer = &msm7x30_timer,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
@@ -154,5 +153,5 @@
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm_timer,
+	.timer = &msm7x30_timer,
 MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm8960.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm8960.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm8960.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm8960.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,122 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-
-static void __init msm8960_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM &&
-				tag->u.mem.start == 0x40200000) {
-			tag->u.mem.start = 0x40000000;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm8960_reserve(void)
-{
-	memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8960_map_io(void)
-{
-	msm_map_msm8960_io();
-}
-
-static void __init msm8960_init_irq(void)
-{
-	unsigned int i;
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
-
-	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
-	if (machine_is_msm8960_rumi3())
-		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
-	/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
-	 * as they are configured as level, which does not play nice with
-	 * handle_percpu_irq.
-	 */
-	for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
-		if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
-			irq_set_handler(i, handle_percpu_irq);
-	}
-}
-
-static struct platform_device *sim_devices[] __initdata = {
-	&msm8960_device_uart_gsbi2,
-};
-
-static struct platform_device *rumi3_devices[] __initdata = {
-	&msm8960_device_uart_gsbi5,
-};
-
-static void __init msm8960_sim_init(void)
-{
-	platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
-}
-
-static void __init msm8960_rumi3_init(void)
-{
-	platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
-}
-
-static void __init msm8960_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
-	.fixup = msm8960_fixup,
-	.reserve = msm8960_reserve,
-	.map_io = msm8960_map_io,
-	.init_irq = msm8960_init_irq,
-	.timer = &msm_timer,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8960_sim_init,
-	.init_late = msm8960_init_late,
-MACHINE_END
-
-MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
-	.fixup = msm8960_fixup,
-	.reserve = msm8960_reserve,
-	.map_io = msm8960_map_io,
-	.init_irq = msm8960_init_irq,
-	.timer = &msm_timer,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8960_rumi3_init,
-	.init_late = msm8960_init_late,
-MACHINE_END
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm8x60.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm8x60.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-msm8x60.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-msm8x60.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,166 +0,0 @@
-/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM &&
-				tag->u.mem.start == 0x40200000) {
-			tag->u.mem.start = 0x40000000;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm8x60_reserve(void)
-{
-	memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8x60_map_io(void)
-{
-	msm_map_msm8x60_io();
-}
-
-#ifdef CONFIG_OF
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
-	{}
-};
-#endif
-
-static void __init msm8x60_init_irq(void)
-{
-	if (!of_have_populated_dt())
-		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-			 (void *)MSM_QGIC_CPU_BASE);
-#ifdef CONFIG_OF
-	else
-		of_irq_init(msm_dt_gic_match);
-#endif
-
-	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
-	/* RUMI does not adhere to GIC spec by enabling STIs by default.
-	 * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
-	 */
-	if (!machine_is_msm8x60_sim())
-		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-}
-
-static void __init msm8x60_init(void)
-{
-}
-
-static void __init msm8x60_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-#ifdef CONFIG_OF
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
-	{}
-};
-
-static void __init msm8x60_dt_init(void)
-{
-	if (of_machine_is_compatible("qcom,msm8660-surf")) {
-		printk(KERN_INFO "Init surf UART registers\n");
-		msm8x60_init_uart12dm();
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
-	"qcom,msm8660-fluid",
-	"qcom,msm8660-surf",
-	NULL
-};
-#endif /* CONFIG_OF */
-
-MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-#ifdef CONFIG_OF
-/* TODO: General device tree support for all MSM. */
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.init_machine = msm8x60_dt_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-	.dt_compat = msm8x60_fluid_match,
-MACHINE_END
-#endif /* CONFIG_OF */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-qsd8x50.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-qsd8x50.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-qsd8x50.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-qsd8x50.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,14 +32,13 @@
 #include <mach/irqs.h>
 #include <mach/sirc.h>
 #include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
+#include "common.h"
 
-extern struct sys_timer msm_timer;
-
-static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
-static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
+static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
+static const unsigned        qsd8x50_surf_smc91x_gpio __initconst = 156;
 
 /* Leave smc91x resources empty here, as we'll fill them in
  * at run-time: they vary from board to board, and the true
@@ -201,7 +200,7 @@
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
 	.init_late = qsd8x50_init_late,
-	.timer = &msm_timer,
+	.timer = &qsd8x50_timer,
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
@@ -210,5 +209,5 @@
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
 	.init_late = qsd8x50_init_late,
-	.timer = &msm_timer,
+	.timer = &qsd8x50_timer,
 MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-sapphire.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-sapphire.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-sapphire.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-sapphire.c	2012-12-10 22:30:57.000000000 -0500
@@ -27,7 +27,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
-#include <mach/system.h>
 #include <mach/vreg.h>
 #include <mach/board.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-trout.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-trout.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-trout.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-trout.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,6 +31,7 @@
 
 #include "devices.h"
 #include "board-trout.h"
+#include "common.h"
 
 extern int trout_init_mmc(unsigned int);
 
@@ -42,8 +43,6 @@
 	&msm_device_i2c,
 };
 
-extern struct sys_timer msm_timer;
-
 static void __init trout_init_early(void)
 {
 	arch_ioremap_caller = __msm_ioremap_caller;
@@ -111,5 +110,5 @@
 	.init_irq	= trout_init_irq,
 	.init_machine	= trout_init,
 	.init_late	= trout_init_late,
-	.timer		= &msm_timer,
+	.timer		= &msm7x01_timer,
 MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-trout-mmc.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-trout-mmc.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-trout-mmc.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-trout-mmc.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,7 +15,7 @@
 
 #include <mach/vreg.h>
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/board-trout-panel.c linux-libre-3.7-gnu/arch/arm/mach-msm/board-trout-panel.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/board-trout-panel.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/board-trout-panel.c	2012-12-10 22:30:57.000000000 -0500
@@ -14,7 +14,7 @@
 #include <asm/mach-types.h>
 #include <asm/system_info.h>
 
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
 #include <mach/vreg.h>
 
 #include "board-trout.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/clock-pcom.c linux-libre-3.7-gnu/arch/arm/mach-msm/clock-pcom.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/clock-pcom.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/clock-pcom.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,7 @@
 /*
  * glue for the proc_comm interface
  */
-int pc_clk_enable(unsigned id)
+static int pc_clk_enable(unsigned id)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
 	if (rc < 0)
@@ -34,7 +34,7 @@
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-void pc_clk_disable(unsigned id)
+static void pc_clk_disable(unsigned id)
 {
 	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
 }
@@ -54,7 +54,7 @@
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_rate(unsigned id, unsigned rate)
+static int pc_clk_set_rate(unsigned id, unsigned rate)
 {
 	/* The rate _might_ be rounded off to the nearest KHz value by the
 	 * remote function. So a return value of 0 doesn't necessarily mean
@@ -67,7 +67,7 @@
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_min_rate(unsigned id, unsigned rate)
+static int pc_clk_set_min_rate(unsigned id, unsigned rate)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
 	if (rc < 0)
@@ -76,7 +76,7 @@
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_max_rate(unsigned id, unsigned rate)
+static int pc_clk_set_max_rate(unsigned id, unsigned rate)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
 	if (rc < 0)
@@ -85,7 +85,7 @@
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_flags(unsigned id, unsigned flags)
+static int pc_clk_set_flags(unsigned id, unsigned flags)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
 	if (rc < 0)
@@ -94,7 +94,7 @@
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-unsigned pc_clk_get_rate(unsigned id)
+static unsigned pc_clk_get_rate(unsigned id)
 {
 	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
 		return 0;
@@ -102,7 +102,7 @@
 		return id;
 }
 
-unsigned pc_clk_is_enabled(unsigned id)
+static unsigned pc_clk_is_enabled(unsigned id)
 {
 	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
 		return 0;
@@ -110,7 +110,7 @@
 		return id;
 }
 
-long pc_clk_round_rate(unsigned id, unsigned rate)
+static long pc_clk_round_rate(unsigned id, unsigned rate)
 {
 
 	/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/common.h linux-libre-3.7-gnu/arch/arm/mach-msm/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/common.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,32 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_COMMON_H
+#define __MACH_COMMON_H
+
+extern struct sys_timer msm7x01_timer;
+extern struct sys_timer msm7x30_timer;
+extern struct sys_timer msm_dt_timer;
+extern struct sys_timer qsd8x50_timer;
+
+extern void msm_map_common_io(void);
+extern void msm_map_msm7x30_io(void);
+extern void msm_map_msm8x60_io(void);
+extern void msm_map_msm8960_io(void);
+extern void msm_map_qsd8x50_io(void);
+
+extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
+					  unsigned int mtype, void *caller);
+
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/core.h linux-libre-3.7-gnu/arch/arm/mach-msm/core.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/core.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/core.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,2 @@
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/devices-msm7x00.c linux-libre-3.7-gnu/arch/arm/mach-msm/devices-msm7x00.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/devices-msm7x00.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/devices-msm7x00.c	2012-12-10 22:30:57.000000000 -0500
@@ -27,7 +27,7 @@
 
 #include "clock.h"
 #include "clock-pcom.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 static struct resource resources_uart1[] = {
 	{
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/devices-msm7x30.c linux-libre-3.7-gnu/arch/arm/mach-msm/devices-msm7x30.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/devices-msm7x30.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/devices-msm7x30.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,7 +31,7 @@
 #include "clock-pcom.h"
 #include "clock-7x30.h"
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 static struct resource resources_uart2[] = {
 	{
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/devices-msm8960.c linux-libre-3.7-gnu/arch/arm/mach-msm/devices-msm8960.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/devices-msm8960.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/devices-msm8960.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,85 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <mach/irqs-8960.h>
-#include <mach/board.h>
-
-#include "devices.h"
-
-#define MSM_GSBI2_PHYS		0x16100000
-#define MSM_UART2DM_PHYS	(MSM_GSBI2_PHYS + 0x40000)
-
-#define MSM_GSBI5_PHYS		0x16400000
-#define MSM_UART5DM_PHYS	(MSM_GSBI5_PHYS + 0x40000)
-
-static struct resource resources_uart_gsbi2[] = {
-	{
-		.start	= GSBI2_UARTDM_IRQ,
-		.end	= GSBI2_UARTDM_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2DM_PHYS,
-		.end	= MSM_UART2DM_PHYS + PAGE_SIZE - 1,
-		.name	= "uart_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MSM_GSBI2_PHYS,
-		.end	= MSM_GSBI2_PHYS + PAGE_SIZE - 1,
-		.name	= "gsbi_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm8960_device_uart_gsbi2 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart_gsbi2),
-	.resource	= resources_uart_gsbi2,
-};
-
-static struct resource resources_uart_gsbi5[] = {
-	{
-		.start	= GSBI5_UARTDM_IRQ,
-		.end	= GSBI5_UARTDM_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART5DM_PHYS,
-		.end	= MSM_UART5DM_PHYS + PAGE_SIZE - 1,
-		.name	= "uart_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MSM_GSBI5_PHYS,
-		.end	= MSM_GSBI5_PHYS + PAGE_SIZE - 1,
-		.name	= "gsbi_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm8960_device_uart_gsbi5 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart_gsbi5),
-	.resource	= resources_uart_gsbi5,
-};
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/devices-qsd8x50.c linux-libre-3.7-gnu/arch/arm/mach-msm/devices-qsd8x50.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/devices-qsd8x50.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/devices-qsd8x50.c	2012-12-10 22:30:57.000000000 -0500
@@ -27,7 +27,7 @@
 
 #include <asm/mach/flash.h>
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 #include "clock-pcom.h"
 
 static struct resource resources_uart3[] = {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/dma.c linux-libre-3.7-gnu/arch/arm/mach-msm/dma.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/dma.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/dma.c	2012-12-10 22:30:57.000000000 -0500
@@ -223,8 +223,7 @@
 			PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
 			if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
 				cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
-				list_del(&cmd->list);
-				list_add_tail(&cmd->list, &active_commands[id]);
+				list_move_tail(&cmd->list, &active_commands[id]);
 				if (cmd->execute_func)
 					cmd->execute_func(cmd);
 				PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/hotplug.c linux-libre-3.7-gnu/arch/arm/mach-msm/hotplug.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/hotplug.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/hotplug.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,7 +13,7 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
-extern volatile int pen_release;
+#include "common.h"
 
 static inline void cpu_enter_lowpower(void)
 {
@@ -57,17 +57,12 @@
 	}
 }
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref msm_cpu_die(unsigned int cpu)
 {
 	/*
 	 * we're ready for shutdown now, so do it
@@ -81,12 +76,3 @@
 	 */
 	cpu_leave_lowpower();
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/idle.c linux-libre-3.7-gnu/arch/arm/mach-msm/idle.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/idle.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/idle.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,49 +0,0 @@
-/* arch/arm/mach-msm/idle.c
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <asm/system.h>
-
-static void msm_idle(void)
-{
-#ifdef CONFIG_MSM7X00A_IDLE
-	asm volatile (
-
-	"mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */ \n\t"
-	"bic     r0, r1, #(1 << 2)        /* clear dcache bit   */ \n\t"
-	"bic     r0, r0, #(1 << 12)       /* clear icache bit   */ \n\t"
-	"mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */ \n\t"
-
-	"mov     r0, #0                   /* prepare wfi value  */ \n\t"
-	"mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */ \n\t"
-	"mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */ \n\t"
-	"mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */ \n\t"
-
-	"mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */ \n\t"
-
-	: : : "r0","r1" );
-#endif
-}
-
-static int __init msm_idle_init(void)
-{
-	arm_pm_idle = msm_idle;
-	return 0;
-}
-
-arch_initcall(msm_idle_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/board.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/board.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/board.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/board.h	2012-12-10 22:30:57.000000000 -0500
@@ -18,31 +18,18 @@
 #define __ASM_ARCH_MSM_BOARD_H
 
 #include <linux/types.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 /* platform device data structures */
 
-struct msm_acpu_clock_platform_data
-{
-	uint32_t acpu_switch_time_us;
-	uint32_t max_speed_delta_khz;
-	uint32_t vdd_switch_time_us;
-	unsigned long power_collapse_khz;
-	unsigned long wait_for_irq_khz;
-};
-
 struct clk_lookup;
 
-extern struct sys_timer msm_timer;
-
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 
 void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
 void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks);
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
 int __init msm_add_sdcc(unsigned int controller,
 			struct msm_mmc_platform_data *plat,
 			unsigned int stat_irq, unsigned long stat_irq_flags);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-/* empty */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/mmc.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/mmc.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/mmc.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/mmc.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,30 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-
-struct msm_mmc_gpio {
-	unsigned no;
-	const char *name;
-};
-
-struct msm_mmc_gpio_data {
-	struct msm_mmc_gpio *gpio;
-	u8 size;
-};
-
-struct msm_mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
-	struct msm_mmc_gpio_data *gpio_data;
-	void (*init_card)(struct mmc_card *card);
-};
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_fb.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_fb.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_fb.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_fb.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,147 +0,0 @@
-/* arch/arm/mach-msm/include/mach/msm_fb.h
- *
- * Internal shared definitions for various MSM framebuffer parts.
- *
- * Copyright (C) 2007 Google Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MSM_FB_H_
-#define _MSM_FB_H_
-
-#include <linux/device.h>
-
-struct mddi_info;
-
-struct msm_fb_data {
-	int xres;	/* x resolution in pixels */
-	int yres;	/* y resolution in pixels */
-	int width;	/* disply width in mm */
-	int height;	/* display height in mm */
-	unsigned output_format;
-};
-
-struct msmfb_callback {
-	void (*func)(struct msmfb_callback *);
-};
-
-enum {
-	MSM_MDDI_PMDH_INTERFACE,
-	MSM_MDDI_EMDH_INTERFACE,
-	MSM_EBI2_INTERFACE,
-};
-
-#define MSMFB_CAP_PARTIAL_UPDATES	(1 << 0)
-
-struct msm_panel_data {
-	/* turns off the fb memory */
-	int (*suspend)(struct msm_panel_data *);
-	/* turns on the fb memory */
-	int (*resume)(struct msm_panel_data *);
-	/* turns off the panel */
-	int (*blank)(struct msm_panel_data *);
-	/* turns on the panel */
-	int (*unblank)(struct msm_panel_data *);
-	void (*wait_vsync)(struct msm_panel_data *);
-	void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
-	void (*clear_vsync)(struct msm_panel_data *);
-	/* from the enum above */
-	unsigned interface_type;
-	/* data to be passed to the fb driver */
-	struct msm_fb_data *fb_data;
-
-	/* capabilities supported by the panel */
-	uint32_t caps;
-};
-
-struct msm_mddi_client_data {
-	void (*suspend)(struct msm_mddi_client_data *);
-	void (*resume)(struct msm_mddi_client_data *);
-	void (*activate_link)(struct msm_mddi_client_data *);
-	void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
-			     uint32_t reg);
-	uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
-	void (*auto_hibernate)(struct msm_mddi_client_data *, int);
-	/* custom data that needs to be passed from the board file to a 
-	 * particular client */
-	void *private_client_data;
-	struct resource *fb_resource;
-	/* from the list above */
-	unsigned interface_type;
-};
-
-struct msm_mddi_platform_data {
-	unsigned int clk_rate;
-	void (*power_client)(struct msm_mddi_client_data *, int on);
-
-	/* fixup the mfr name, product id */
-	void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
-
-	struct resource *fb_resource; /*optional*/
-	/* number of clients in the list that follows */
-	int num_clients;
-	/* array of client information of clients */
-	struct {
-		unsigned product_id; /* mfr id in top 16 bits, product id
-				      * in lower 16 bits
-				      */
-		char *name;	/* the device name will be the platform
-				 * device name registered for the client,
-				 * it should match the name of the associated
-				 * driver
-				 */
-		unsigned id;	/* id for mddi client device node, will also
-				 * be used as device id of panel devices, if
-				 * the client device will have multiple panels
-				 * space must be left here for them
-				 */
-		void *client_data;	/* required private client data */
-		unsigned int clk_rate;	/* optional: if the client requires a
-					* different mddi clk rate
-					*/
-	} client_platform_data[];
-};
-
-struct mdp_blit_req;
-struct fb_info;
-struct mdp_device {
-	struct device dev;
-	void (*dma)(struct mdp_device *mpd, uint32_t addr,
-		    uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
-		    uint32_t y, struct msmfb_callback *callback, int interface);
-	void (*dma_wait)(struct mdp_device *mdp);
-	int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
-		    struct mdp_blit_req *req);
-	void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
-};
-
-struct class_interface;
-int register_mdp_client(struct class_interface *class_intf);
-
-/**** private client data structs go below this line ***/
-
-struct msm_mddi_bridge_platform_data {
-	/* from board file */
-	int (*init)(struct msm_mddi_bridge_platform_data *,
-		    struct msm_mddi_client_data *);
-	int (*uninit)(struct msm_mddi_bridge_platform_data *,
-		      struct msm_mddi_client_data *);
-	/* passed to panel for use by the fb driver */
-	int (*blank)(struct msm_mddi_bridge_platform_data *,
-		     struct msm_mddi_client_data *);
-	int (*unblank)(struct msm_mddi_bridge_platform_data *,
-		       struct msm_mddi_client_data *);
-	struct msm_fb_data fb_data;
-};
-
-
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h	2012-12-10 22:30:57.000000000 -0500
@@ -105,11 +105,4 @@
 #define MSM_AD5_PHYS          0xAC000000
 #define MSM_AD5_SIZE          (SZ_1M*13)
 
-#ifndef __ASSEMBLY__
-
-extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
-					  unsigned int mtype, void *caller);
-
-#endif
-
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h	2012-12-10 22:30:57.000000000 -0500
@@ -100,8 +100,4 @@
 #define MSM_HSUSB_PHYS        0xA3600000
 #define MSM_HSUSB_SIZE        SZ_1K
 
-#ifndef __ASSEMBLY__
-extern void msm_map_msm7x30_io(void);
-#endif
-
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8960.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8960.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8960.h	2012-12-10 22:30:57.000000000 -0500
@@ -46,12 +46,8 @@
 #define MSM8960_TMR0_SIZE	SZ_4K
 
 #ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_BASE	0xF0040000
 #define MSM_DEBUG_UART_PHYS	0x16440000
 #endif
 
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8960_io(void);
-#endif
-
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h	2012-12-10 22:30:57.000000000 -0500
@@ -122,8 +122,4 @@
 #define MSM_SDC4_PHYS          0xA0600000
 #define MSM_SDC4_SIZE          SZ_4K
 
-#ifndef __ASSEMBLY__
-extern void msm_map_qsd8x50_io(void);
-#endif
-
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h	2012-12-10 22:30:57.000000000 -0500
@@ -41,21 +41,10 @@
 #define MSM8X60_QGIC_CPU_PHYS	0x02081000
 #define MSM8X60_QGIC_CPU_SIZE	SZ_4K
 
-#define MSM_ACC_BASE		IOMEM(0xF0002000)
-#define MSM_ACC_PHYS		0x02001000
-#define MSM_ACC_SIZE		SZ_4K
-
-#define MSM_GCC_BASE		IOMEM(0xF0003000)
-#define MSM_GCC_PHYS		0x02082000
-#define MSM_GCC_SIZE		SZ_4K
-
 #define MSM_TLMM_BASE		IOMEM(0xF0004000)
 #define MSM_TLMM_PHYS		0x00800000
 #define MSM_TLMM_SIZE		SZ_16K
 
-#define MSM_SHARED_RAM_BASE	IOMEM(0xF0100000)
-#define MSM_SHARED_RAM_SIZE	SZ_1M
-
 #define MSM8X60_TMR_PHYS	0x02000000
 #define MSM8X60_TMR_SIZE	SZ_4K
 
@@ -63,12 +52,8 @@
 #define MSM8X60_TMR0_SIZE	SZ_4K
 
 #ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_BASE	0xF0040000
 #define MSM_DEBUG_UART_PHYS	0x19C40000
 #endif
 
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8x60_io(void);
-#endif
-
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h	2012-12-10 22:30:57.000000000 -0500
@@ -41,12 +41,11 @@
 #include "msm_iomap-7x30.h"
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "msm_iomap-8x50.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "msm_iomap-8x60.h"
 #else
 #include "msm_iomap-7x00.h"
 #endif
 
+#include "msm_iomap-8x60.h"
 #include "msm_iomap-8960.h"
 
 #define MSM_DEBUG_UART_SIZE	SZ_4K
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/system.h linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/system.h
--- linux-libre-3.6-gnu/arch/arm/mach-msm/include/mach/system.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/include/mach/system.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/* arch/arm/mach-msm/include/mach/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-/* low level hardware reset hook -- for example, hitting the
- * PSHOLD line on the PMIC to hard reset the system
- */
-extern void (*msm_hw_reset_hook)(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/io.c linux-libre-3.7-gnu/arch/arm/mach-msm/io.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/io.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/io.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,30 +29,32 @@
 
 #include <mach/board.h>
 
-#define MSM_CHIP_DEVICE(name, chip) {			      \
+#include "common.h"
+
+#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) {			      \
 		.virtual = (unsigned long) MSM_##name##_BASE, \
 		.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
 		.length = chip##_##name##_SIZE, \
-		.type = MT_DEVICE_NONSHARED, \
+		.type = mem_type, \
 	 }
 
+#define MSM_DEVICE_TYPE(name, mem_type) \
+		MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
+#define MSM_CHIP_DEVICE(name, chip) \
+		MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
 #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
 
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
-	|| defined(CONFIG_ARCH_MSM7X25)
+#if defined(CONFIG_ARCH_MSM7X00A)
 static struct map_desc msm_io_desc[] __initdata = {
-	MSM_DEVICE(VIC),
-	MSM_CHIP_DEVICE(CSR, MSM7X00),
-	MSM_DEVICE(DMOV),
-	MSM_CHIP_DEVICE(GPIO1, MSM7X00),
-	MSM_CHIP_DEVICE(GPIO2, MSM7X00),
-	MSM_DEVICE(CLK_CTL),
+	MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
+	MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
+	MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
+	MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
+	MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
+	MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
 #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
 	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
-#ifdef CONFIG_ARCH_MSM7X30
-	MSM_DEVICE(GCC),
+	MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
 #endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
@@ -109,8 +111,6 @@
 	MSM_CHIP_DEVICE(QGIC_CPU, MSM8X60),
 	MSM_CHIP_DEVICE(TMR, MSM8X60),
 	MSM_CHIP_DEVICE(TMR0, MSM8X60),
-	MSM_DEVICE(ACC),
-	MSM_DEVICE(GCC),
 #ifdef CONFIG_DEBUG_MSM8660_UART
 	MSM_DEVICE(DEBUG_UART),
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/Kconfig linux-libre-3.7-gnu/arch/arm/mach-msm/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-msm/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,64 +1,67 @@
 if ARCH_MSM
 
+comment "Qualcomm MSM SoC Type"
+	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
+	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
-	select MACH_TROUT if !MACH_HALIBUT
 	select ARCH_MSM_ARM11
-	select MSM_SMD
-	select MSM_SMD_PKG3
 	select CPU_V6
 	select GPIO_MSM_V1
+	select MACH_TROUT if !MACH_HALIBUT
 	select MSM_PROC_COMM
+	select MSM_SMD
+	select MSM_SMD_PKG3
 
 config ARCH_MSM7X30
 	bool "MSM7x30"
-	select MACH_MSM7X30_SURF # if !
 	select ARCH_MSM_SCORPION
-	select MSM_SMD
-	select MSM_VIC
 	select CPU_V7
-	select MSM_GPIOMUX
 	select GPIO_MSM_V1
+	select MACH_MSM7X30_SURF # if !
+	select MSM_GPIOMUX
 	select MSM_PROC_COMM
+	select MSM_SMD
+	select MSM_VIC
 
 config ARCH_QSD8X50
 	bool "QSD8X50"
-	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
 	select ARCH_MSM_SCORPION
-	select MSM_SMD
-	select MSM_VIC
 	select CPU_V7
-	select MSM_GPIOMUX
 	select GPIO_MSM_V1
+	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
+	select MSM_GPIOMUX
 	select MSM_PROC_COMM
+	select MSM_SMD
+	select MSM_VIC
+
+endchoice
 
 config ARCH_MSM8X60
 	bool "MSM8X60"
-	select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
-				  && !MACH_MSM8X60_FFA)
 	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
-	select MSM_V2_TLMM
 	select GPIO_MSM_V2
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
+	select MSM_V2_TLMM
+	select USE_OF
 
 config ARCH_MSM8960
 	bool "MSM8960"
 	select ARCH_MSM_SCORPIONMP
-	select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3)
 	select ARM_GIC
 	select CPU_V7
-	select MSM_V2_TLMM
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
-
-endchoice
+	select MSM_V2_TLMM
+	select USE_OF
 
 config MSM_HAS_DEBUG_UART_HS
 	bool
@@ -107,47 +110,11 @@
 
 config MACH_QSD8X50A_ST1_5
 	depends on ARCH_QSD8X50
-	select MSM_SOC_REV_A
 	bool "QSD8x50A ST1.5"
+	select MSM_SOC_REV_A
 	help
 	  Support for the Qualcomm ST1.5.
 
-config MACH_MSM8X60_RUMI3
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 RUMI3"
-	help
-	  Support for the Qualcomm MSM8x60 RUMI3 emulator.
-
-config MACH_MSM8X60_SURF
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 SURF"
-	help
-	  Support for the Qualcomm MSM8x60 SURF eval board.
-
-config MACH_MSM8X60_SIM
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 Simulator"
-	help
-	  Support for the Qualcomm MSM8x60 simulator.
-
-config MACH_MSM8X60_FFA
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 FFA"
-	help
-	  Support for the Qualcomm MSM8x60 FFA eval board.
-
-config MACH_MSM8960_SIM
-	depends on ARCH_MSM8960
-	bool "MSM8960 Simulator"
-	help
-	  Support for the Qualcomm MSM8960 simulator.
-
-config MACH_MSM8960_RUMI3
-	depends on ARCH_MSM8960
-	bool "MSM8960 RUMI3"
-	help
-	  Support for the Qualcomm MSM8960 RUMI3 emulator.
-
 endmenu
 
 config MSM_SMD_PKG3
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/Makefile linux-libre-3.7-gnu/arch/arm/mach-msm/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-msm/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -1,11 +1,11 @@
-obj-y += io.o idle.o timer.o
+obj-y += io.o timer.o
 obj-y += clock.o
 obj-$(CONFIG_DEBUG_FS) += clock-debug.o
 
 obj-$(CONFIG_MSM_VIC) += irq-vic.o
 obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
 
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o
+obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o
 obj-$(CONFIG_ARCH_MSM7X30) += dma.o
 obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o
 
@@ -25,8 +25,8 @@
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
-obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
+obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
 
 obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/platsmp.c linux-libre-3.7-gnu/arch/arm/mach-msm/platsmp.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/platsmp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/platsmp.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,23 +22,14 @@
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
 
-#include <mach/msm_iomap.h>
-
 #include "scm-boot.h"
+#include "common.h"
 
 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
 #define SCSS_CPU1CORE_RESET 0xD80
 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
 
-/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
-
 extern void msm_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen".
- */
-volatile int pen_release = -1;
 
 static DEFINE_SPINLOCK(boot_lock);
 
@@ -48,11 +39,8 @@
 	return ((read_cpuid_id() >> 4) & 3) + 1;
 }
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit msm_secondary_init(unsigned int cpu)
 {
-	/* Configure edge-triggered PPIs */
-	writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
@@ -93,7 +81,7 @@
 				  "address\n");
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	static int cold_boot_done;
@@ -153,7 +141,7 @@
  * does not support the ARM SCU, so just set the possible cpu mask to
  * NR_CPUS.
  */
-void __init smp_init_cpus(void)
+static void __init msm_smp_init_cpus(void)
 {
 	unsigned int i, ncores = get_core_count();
 
@@ -169,6 +157,16 @@
         set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
 {
 }
+
+struct smp_operations msm_smp_ops __initdata = {
+	.smp_init_cpus		= msm_smp_init_cpus,
+	.smp_prepare_cpus	= msm_smp_prepare_cpus,
+	.smp_secondary_init	= msm_secondary_init,
+	.smp_boot_secondary	= msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= msm_cpu_die,
+#endif
+};
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/proc_comm.c linux-libre-3.7-gnu/arch/arm/mach-msm/proc_comm.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/proc_comm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/proc_comm.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,6 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <mach/msm_iomap.h>
-#include <mach/system.h>
 
 #include "proc_comm.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/smd.c linux-libre-3.7-gnu/arch/arm/mach-msm/smd.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/smd.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/smd.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,6 @@
 #include <linux/delay.h>
 
 #include <mach/msm_smd.h>
-#include <mach/system.h>
 
 #include "smd_private.h"
 #include "proc_comm.h"
@@ -39,8 +38,6 @@
 #define CONFIG_QDSP6 1
 #endif
 
-void (*msm_hw_reset_hook)(void);
-
 #define MODULE_NAME "msm_smd"
 
 enum {
@@ -52,13 +49,14 @@
 
 struct shared_info {
 	int ready;
-	unsigned state;
+	void __iomem *state;
 };
 
 static unsigned dummy_state[SMSM_STATE_COUNT];
 
 static struct shared_info smd_info = {
-	.state = (unsigned) &dummy_state,
+	/* FIXME: not a real __iomem pointer */
+	.state = &dummy_state,
 };
 
 module_param_named(debug_mask, msm_smd_debug_mask,
@@ -101,10 +99,6 @@
 	pr_err("ARM9 has CRASHED\n");
 	smd_diag();
 
-	/* hard reboot if possible */
-	if (msm_hw_reset_hook)
-		msm_hw_reset_hook();
-
 	/* in this case the modem or watchdog should reboot us */
 	for (;;)
 		;
@@ -796,22 +790,22 @@
 	return smem_find(id, size);
 }
 
-void *smem_item(unsigned id, unsigned *size)
+void __iomem *smem_item(unsigned id, unsigned *size)
 {
 	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
 	struct smem_heap_entry *toc = shared->heap_toc;
 
 	if (id >= SMEM_NUM_ITEMS)
-		return 0;
+		return NULL;
 
 	if (toc[id].allocated) {
 		*size = toc[id].size;
-		return (void *) (MSM_SHARED_RAM_BASE + toc[id].offset);
+		return (MSM_SHARED_RAM_BASE + toc[id].offset);
 	} else {
 		*size = 0;
 	}
 
-	return 0;
+	return NULL;
 }
 
 void *smem_find(unsigned id, unsigned size_in)
@@ -857,7 +851,7 @@
 int smsm_change_state(enum smsm_state_item item,
 		      uint32_t clear_mask, uint32_t set_mask)
 {
-	unsigned long addr = smd_info.state + item * 4;
+	void __iomem *addr = smd_info.state + item * 4;
 	unsigned long flags;
 	unsigned state;
 
@@ -943,10 +937,10 @@
 	/* wait for essential items to be initialized */
 	for (;;) {
 		unsigned size;
-		void *state;
+		void __iomem *state;
 		state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
 		if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
-			smd_info.state = (unsigned)state;
+			smd_info.state = state;
 			break;
 		}
 	}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-msm/timer.c linux-libre-3.7-gnu/arch/arm/mach-msm/timer.c
--- linux-libre-3.6-gnu/arch/arm/mach-msm/timer.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-msm/timer.c	2012-12-10 22:30:57.000000000 -0500
@@ -1,7 +1,7 @@
 /*
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -20,15 +20,16 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 #include <asm/sched_clock.h>
 
-#include <mach/msm_iomap.h>
-#include <mach/cpu.h>
-#include <mach/board.h>
+#include "common.h"
 
 #define TIMER_MATCH_VAL         0x0000
 #define TIMER_COUNT_VAL         0x0004
@@ -36,7 +37,6 @@
 #define TIMER_ENABLE_CLR_ON_MATCH_EN    BIT(1)
 #define TIMER_ENABLE_EN                 BIT(0)
 #define TIMER_CLEAR             0x000C
-#define DGT_CLK_CTL             0x0034
 #define DGT_CLK_CTL_DIV_4	0x3
 
 #define GPT_HZ 32768
@@ -101,7 +101,7 @@
 
 static union {
 	struct clock_event_device *evt;
-	struct clock_event_device __percpu **percpu_evt;
+	struct clock_event_device * __percpu *percpu_evt;
 } msm_evt;
 
 static void __iomem *source_base;
@@ -151,7 +151,7 @@
 
 	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
 	clockevents_register_device(evt);
-	enable_percpu_irq(evt->irq, 0);
+	enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
 	return 0;
 }
 
@@ -172,44 +172,21 @@
 	return msm_clocksource.read(&msm_clocksource);
 }
 
-static void __init msm_timer_init(void)
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+				  bool percpu)
 {
 	struct clock_event_device *ce = &msm_clockevent;
 	struct clocksource *cs = &msm_clocksource;
 	int res;
-	u32 dgt_hz;
-
-	if (cpu_is_msm7x01()) {
-		event_base = MSM_CSR_BASE;
-		source_base = MSM_CSR_BASE + 0x10;
-		dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */
-		cs->read = msm_read_timer_count_shift;
-		cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
-	} else if (cpu_is_msm7x30()) {
-		event_base = MSM_CSR_BASE + 0x04;
-		source_base = MSM_CSR_BASE + 0x24;
-		dgt_hz = 24576000 / 4;
-	} else if (cpu_is_qsd8x50()) {
-		event_base = MSM_CSR_BASE;
-		source_base = MSM_CSR_BASE + 0x10;
-		dgt_hz = 19200000 / 4;
-	} else if (cpu_is_msm8x60() || cpu_is_msm8960()) {
-		event_base = MSM_TMR_BASE + 0x04;
-		/* Use CPU0's timer as the global clock source. */
-		source_base = MSM_TMR0_BASE + 0x24;
-		dgt_hz = 27000000 / 4;
-		writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
-	} else
-		BUG();
 
 	writel_relaxed(0, event_base + TIMER_ENABLE);
 	writel_relaxed(0, event_base + TIMER_CLEAR);
 	writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
 	ce->cpumask = cpumask_of(0);
+	ce->irq = irq;
 
-	ce->irq = INT_GP_TIMER_EXP;
 	clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
-	if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+	if (percpu) {
 		msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
 		if (!msm_evt.percpu_evt) {
 			pr_err("memory allocation failed for %s\n", ce->name);
@@ -219,7 +196,7 @@
 		res = request_percpu_irq(ce->irq, msm_timer_interrupt,
 					 ce->name, msm_evt.percpu_evt);
 		if (!res) {
-			enable_percpu_irq(ce->irq, 0);
+			enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING);
 #ifdef CONFIG_LOCAL_TIMERS
 			local_timer_register(&msm_local_timer_ops);
 #endif
@@ -238,10 +215,143 @@
 	res = clocksource_register_hz(cs, dgt_hz);
 	if (res)
 		pr_err("clocksource_register failed\n");
-	setup_sched_clock(msm_sched_clock_read,
-			cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz);
+	setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
 }
 
-struct sys_timer msm_timer = {
-	.init = msm_timer_init
+#ifdef CONFIG_OF
+static const struct of_device_id msm_dgt_match[] __initconst = {
+	{ .compatible = "qcom,msm-dgt" },
+	{ },
+};
+
+static const struct of_device_id msm_gpt_match[] __initconst = {
+	{ .compatible = "qcom,msm-gpt" },
+	{ },
+};
+
+static void __init msm_dt_timer_init(void)
+{
+	struct device_node *np;
+	u32 freq;
+	int irq;
+	struct resource res;
+	u32 percpu_offset;
+	void __iomem *dgt_clk_ctl;
+
+	np = of_find_matching_node(NULL, msm_gpt_match);
+	if (!np) {
+		pr_err("Can't find GPT DT node\n");
+		return;
+	}
+
+	event_base = of_iomap(np, 0);
+	if (!event_base) {
+		pr_err("Failed to map event base\n");
+		return;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0) {
+		pr_err("Can't get irq\n");
+		return;
+	}
+	of_node_put(np);
+
+	np = of_find_matching_node(NULL, msm_dgt_match);
+	if (!np) {
+		pr_err("Can't find DGT DT node\n");
+		return;
+	}
+
+	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("Failed to parse DGT resource\n");
+		return;
+	}
+
+	source_base = ioremap(res.start + percpu_offset, resource_size(&res));
+	if (!source_base) {
+		pr_err("Failed to map source base\n");
+		return;
+	}
+
+	if (!of_address_to_resource(np, 1, &res)) {
+		dgt_clk_ctl = ioremap(res.start + percpu_offset,
+				      resource_size(&res));
+		if (!dgt_clk_ctl) {
+			pr_err("Failed to map DGT control base\n");
+			return;
+		}
+		writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl);
+		iounmap(dgt_clk_ctl);
+	}
+
+	if (of_property_read_u32(np, "clock-frequency", &freq)) {
+		pr_err("Unknown frequency\n");
+		return;
+	}
+	of_node_put(np);
+
+	msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+
+struct sys_timer msm_dt_timer = {
+	.init = msm_dt_timer_init
+};
+#endif
+
+static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
+{
+	event_base = ioremap(event, SZ_64);
+	if (!event_base) {
+		pr_err("Failed to map event base\n");
+		return 1;
+	}
+	source_base = ioremap(source, SZ_64);
+	if (!source_base) {
+		pr_err("Failed to map source base\n");
+		return 1;
+	}
+	return 0;
+}
+
+static void __init msm7x01_timer_init(void)
+{
+	struct clocksource *cs = &msm_clocksource;
+
+	if (msm_timer_map(0xc0100000, 0xc0100010))
+		return;
+	cs->read = msm_read_timer_count_shift;
+	cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+	/* 600 KHz */
+	msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+			false);
+}
+
+struct sys_timer msm7x01_timer = {
+	.init = msm7x01_timer_init
+};
+
+static void __init msm7x30_timer_init(void)
+{
+	if (msm_timer_map(0xc0100004, 0xc0100024))
+		return;
+	msm_timer_init(24576000 / 4, 32, 1, false);
+}
+
+struct sys_timer msm7x30_timer = {
+	.init = msm7x30_timer_init
+};
+
+static void __init qsd8x50_timer_init(void)
+{
+	if (msm_timer_map(0xAC100000, 0xAC100010))
+		return;
+	msm_timer_init(19200000 / 4, 32, 7, false);
+}
+
+struct sys_timer qsd8x50_timer = {
+	.init = qsd8x50_timer_init
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/addr-map.c linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/addr-map.c
--- linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/addr-map.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/addr-map.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,6 +13,7 @@
 #include <linux/mbus.h>
 #include <linux/io.h>
 #include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
 #include "common.h"
 
 /*
@@ -47,13 +48,13 @@
 	 * so we don't need to take that into account here.
 	 */
 
-	return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+	return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
 }
 
 /*
  * Description of the windows needed by the platform code
  */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+static struct orion_addr_map_cfg addr_map_cfg __initdata = {
 	.num_wins = 14,
 	.remappable_wins = 8,
 	.win_cfg_base = win_cfg_base,
@@ -71,17 +72,17 @@
 	 */
 	if (mv78xx0_core_index() == 0)
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU0_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU0_BASE);
 	else
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU1_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU1_BASE);
 }
 
 void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
 				      int maj, int min)
 {
 	orion_setup_cpu_win(&addr_map_cfg, window, base, size,
-			    TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
+			    TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0);
 }
 
 void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/common.c linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,8 +20,8 @@
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
@@ -130,17 +130,12 @@
  ****************************************************************************/
 static struct map_desc mv78xx0_io_desc[] __initdata = {
 	{
-		.virtual	= MV78XX0_CORE_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE,
 		.pfn		= 0,
 		.length		= MV78XX0_CORE_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= MV78XX0_PCIE_IO_VIRT_BASE(0),
-		.pfn		= __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
-		.length		= MV78XX0_PCIE_IO_SIZE * 8,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MV78XX0_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
 		.length		= MV78XX0_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -341,7 +336,7 @@
 	orion_time_set_base(TIMER_VIRT_BASE);
 }
 
-static void mv78xx0_timer_init(void)
+static void __init_refok mv78xx0_timer_init(void)
 {
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
 			IRQ_MV78XX0_TIMER_1, get_tclk());
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
--- linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h	2012-12-10 22:30:57.000000000 -0500
@@ -11,18 +11,18 @@
 
 #include <mach/mv78xx0.h>
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define L2_WRITETHROUGH		0x00020000
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_ERR_OFF	0x0000
 #define IRQ_CAUSE_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0008
@@ -30,7 +30,7 @@
 #define IRQ_MASK_LOW_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/include/mach/io.h linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/include/mach/io.h
--- linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/include/mach/io.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
-					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a)			__io(a)
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
--- linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h	2012-12-10 22:30:57.000000000 -0500
@@ -29,28 +29,27 @@
  *
  * virt		phys		size
  * fe400000	f102x000	16K	core-specific peripheral registers
- * fe700000	f0800000	1M	PCIe #0 I/O space
- * fe800000	f0900000	1M	PCIe #1 I/O space
- * fe900000	f0a00000	1M	PCIe #2 I/O space
- * fea00000	f0b00000	1M	PCIe #3 I/O space
- * feb00000	f0c00000	1M	PCIe #4 I/O space
- * fec00000	f0d00000	1M	PCIe #5 I/O space
- * fed00000	f0e00000	1M	PCIe #6 I/O space
- * fee00000	f0f00000	1M	PCIe #7 I/O space
- * fef00000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f0800000	64K	PCIe #0 I/O space
+ * fee10000	f0900000	64K	PCIe #1 I/O space
+ * fee20000	f0a00000	64K	PCIe #2 I/O space
+ * fee30000	f0b00000	64K	PCIe #3 I/O space
+ * fee40000	f0c00000	64K	PCIe #4 I/O space
+ * fee50000	f0d00000	64K	PCIe #5 I/O space
+ * fee60000	f0e00000	64K	PCIe #6 I/O space
+ * fee70000	f0f00000	64K	PCIe #7 I/O space
+ * fd000000	f1000000	1M	on-chip peripheral registers
  */
 #define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
 #define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_VIRT_BASE	IOMEM(0xfe400000)
 #define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
 #define MV78XX0_CORE_REGS_SIZE		SZ_16K
 
 #define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
 #define MV78XX0_PCIE_IO_SIZE		SZ_1M
 
 #define MV78XX0_REGS_PHYS_BASE		0xf1000000
-#define MV78XX0_REGS_VIRT_BASE		0xfef00000
+#define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfd000000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
@@ -65,47 +64,47 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1570)
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE + 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE + 0x1570)
 
-#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE | 0x0100)
-#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
-#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE + 0x0100)
+#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1000)
+#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1100)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2300)
 
-#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x34000)
 
-#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x4c000)
 
-#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
 
-#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
 
-#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
 
-#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
  * Supported devices and revisions.
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/irq.c linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/irq.c
--- linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/irq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/irq.c	2012-12-10 22:30:57.000000000 -0500
@@ -10,7 +10,9 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
 #include <plat/irq.h>
 #include "common.h"
 
@@ -23,16 +25,16 @@
 
 void __init mv78xx0_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
 	 * registers for core #1 are at an offset of 0x18 from those of
 	 * core #0.)
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE,
+	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
 			mv78xx0_core_index() ? 0x18 : 0,
 			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/pcie.c linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/pcie.c
--- linux-libre-3.6-gnu/arch/arm/mach-mv78xx0/pcie.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mv78xx0/pcie.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,6 +15,7 @@
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
 #include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
 #include "common.h"
 
 struct pcie_port {
@@ -23,119 +24,73 @@
 	u8			root_bus_nr;
 	void __iomem		*base;
 	spinlock_t		conf_lock;
-	char			io_space_name[16];
 	char			mem_space_name[16];
-	struct resource		res[2];
+	struct resource		res;
 };
 
 static struct pcie_port pcie_port[8];
 static int num_pcie_ports;
 static struct resource pcie_io_space;
-static struct resource pcie_mem_space;
-
 
 void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 {
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE00_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE00_VIRT_BASE);
 }
 
+u32 pcie_port_size[8] = {
+	0,
+	0x30000000,
+	0x10000000,
+	0x10000000,
+	0x08000000,
+	0x08000000,
+	0x08000000,
+	0x04000000,
+};
+
 static void __init mv78xx0_pcie_preinit(void)
 {
 	int i;
 	u32 size_each;
 	u32 start;
-	int win;
+	int win = 0;
 
 	pcie_io_space.name = "PCIe I/O Space";
 	pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
 	pcie_io_space.end =
 		MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
-	pcie_io_space.flags = IORESOURCE_IO;
+	pcie_io_space.flags = IORESOURCE_MEM;
 	if (request_resource(&iomem_resource, &pcie_io_space))
 		panic("can't allocate PCIe I/O space");
 
-	pcie_mem_space.name = "PCIe MEM Space";
-	pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
-	pcie_mem_space.end =
-		MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
-	pcie_mem_space.flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pcie_mem_space))
-		panic("can't allocate PCIe MEM space");
+	if (num_pcie_ports > 7)
+		panic("invalid number of PCIe ports");
+
+	size_each = pcie_port_size[num_pcie_ports];
 
+	start = MV78XX0_PCIE_MEM_PHYS_BASE;
 	for (i = 0; i < num_pcie_ports; i++) {
 		struct pcie_port *pp = pcie_port + i;
 
-		snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-			"PCIe %d.%d I/O", pp->maj, pp->min);
-		pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-		pp->res[0].name = pp->io_space_name;
-		pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
-		pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
-		pp->res[0].flags = IORESOURCE_IO;
-
 		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 			"PCIe %d.%d MEM", pp->maj, pp->min);
 		pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-		pp->res[1].name = pp->mem_space_name;
-		pp->res[1].flags = IORESOURCE_MEM;
-	}
-
-	switch (num_pcie_ports) {
-	case 0:
-		size_each = 0;
-		break;
-
-	case 1:
-		size_each = 0x30000000;
-		break;
-
-	case 2 ... 3:
-		size_each = 0x10000000;
-		break;
-
-	case 4 ... 6:
-		size_each = 0x08000000;
-		break;
-
-	case 7:
-		size_each = 0x04000000;
-		break;
-
-	default:
-		panic("invalid number of PCIe ports");
-	}
-
-	start = MV78XX0_PCIE_MEM_PHYS_BASE;
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
-
-		pp->res[1].start = start;
-		pp->res[1].end = start + size_each - 1;
+		pp->res.name = pp->mem_space_name;
+		pp->res.flags = IORESOURCE_MEM;
+		pp->res.start = start;
+		pp->res.end = start + size_each - 1;
 		start += size_each;
-	}
 
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
-
-		if (request_resource(&pcie_io_space, &pp->res[0]))
-			panic("can't allocate PCIe I/O sub-space");
-
-		if (request_resource(&pcie_mem_space, &pp->res[1]))
+		if (request_resource(&iomem_resource, &pp->res))
 			panic("can't allocate PCIe MEM sub-space");
-	}
 
-	win = 0;
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
+		mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start,
+					   resource_size(&pp->res),
+					   pp->maj, pp->min);
 
-		mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
-					  resource_size(&pp->res[0]),
+		mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K,
 					  pp->maj, pp->min);
-
-		mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
-					   resource_size(&pp->res[1]),
-					   pp->maj, pp->min);
 	}
 }
 
@@ -156,8 +111,9 @@
 	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
 	orion_pcie_setup(pp->base);
 
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+	pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
 	return 1;
 }
@@ -267,11 +223,11 @@
 	.map_irq	= mv78xx0_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int maj, int min, unsigned long base)
+static void __init add_pcie_port(int maj, int min, void __iomem *base)
 {
 	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
 
 		printk("link up\n");
@@ -279,9 +235,9 @@
 		pp->maj = maj;
 		pp->min = min;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
-		memset(pp->res, 0, sizeof(pp->res));
+		memset(&pp->res, 0, sizeof(pp->res));
 	} else {
 		printk("link down, ignoring\n");
 	}
@@ -293,7 +249,7 @@
 
 	if (init_port0) {
 		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
-		if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+		if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) {
 			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
 			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
 			add_pcie_port(0, 3, PCIE03_VIRT_BASE);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/addr-map.c linux-libre-3.7-gnu/arch/arm/mach-mvebu/addr-map.c
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/addr-map.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/addr-map.c	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,134 @@
+/*
+ * Address map functions for Marvell 370 / XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <plat/addr-map.h>
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define ARMADA_XP_TARGET_DEV_BUS	1
+#define   ARMADA_XP_ATTR_DEV_BOOTROM    0x1D
+#define ARMADA_XP_TARGET_ETH1		3
+#define ARMADA_XP_TARGET_PCIE_0_2	4
+#define ARMADA_XP_TARGET_ETH0		7
+#define ARMADA_XP_TARGET_PCIE_1_3	8
+
+#define ARMADA_370_TARGET_DEV_BUS       1
+#define   ARMADA_370_ATTR_DEV_BOOTROM   0x1D
+#define ARMADA_370_TARGET_PCIE_0        4
+#define ARMADA_370_TARGET_PCIE_1        8
+
+#define ARMADA_WINDOW_8_PLUS_OFFSET       0x90
+#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
+
+static const struct __initdata orion_addr_map_info
+armada_xp_addr_map_info[] = {
+	/*
+	 * Window for the BootROM, needed for SMP on Armada XP
+	 */
+	{ 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
+	  ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static const struct __initdata orion_addr_map_info
+armada_370_addr_map_info[] = {
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static struct of_device_id of_addr_decoding_controller_table[] = {
+	{ .compatible = "marvell,armada-addr-decoding-controller" },
+	{ /* end of list */ },
+};
+
+static void __iomem *
+armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+	unsigned int offset;
+
+	/* The register layout is a bit annoying and the below code
+	 * tries to cope with it.
+	 * - At offset 0x0, there are the registers for the first 8
+	 *   windows, with 4 registers of 32 bits per window (ctrl,
+	 *   base, remap low, remap high)
+	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
+	 *   the internal registers base address and internal units
+	 *   sync barrier register.
+	 * - Then at offset 0x90, there the registers for 12
+	 *   windows, with only 2 registers of 32 bits per window
+	 *   (ctrl, base).
+	 */
+	if (win < 8)
+		offset = (win << 4);
+	else
+		offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+
+	return cfg->bridge_virt_base + offset;
+}
+
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+	.num_wins = 20,
+	.remappable_wins = 8,
+	.win_cfg_base = armada_cfg_base,
+};
+
+static int __init armada_setup_cpu_mbus(void)
+{
+	struct device_node *np;
+	void __iomem *mbus_unit_addr_decoding_base;
+	void __iomem *sdram_addr_decoding_base;
+
+	np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
+	if (!np)
+		return -ENODEV;
+
+	mbus_unit_addr_decoding_base = of_iomap(np, 0);
+	BUG_ON(!mbus_unit_addr_decoding_base);
+
+	sdram_addr_decoding_base =
+		mbus_unit_addr_decoding_base +
+		ARMADA_SDRAM_ADDR_DECODING_OFFSET;
+
+	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
+
+	/*
+	 * Disable, clear and configure windows.
+	 */
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
+	else if (of_machine_is_compatible("marvell,armada370"))
+		orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
+	else {
+		pr_err("Unsupported SoC\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    sdram_addr_decoding_base);
+	return 0;
+}
+
+/* Using a early_initcall is needed so that this initialization gets
+ * done before the SMP initialization, which requires the BootROM to
+ * be remapped. */
+early_initcall(armada_setup_cpu_mbus);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/armada-370-xp.c linux-libre-3.7-gnu/arch/arm/mach-mvebu/armada-370-xp.c
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/armada-370-xp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/armada-370-xp.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,12 +20,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/armada-370-xp.h>
+#include "armada-370-xp.h"
 #include "common.h"
 
 static struct map_desc armada_370_xp_io_desc[] __initdata = {
 	{
-		.virtual	= ARMADA_370_XP_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
 		.length		= ARMADA_370_XP_REGS_SIZE,
 		.type		= MT_DEVICE,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/armada-370-xp.h linux-libre-3.7-gnu/arch/arm/mach-mvebu/armada-370-xp.h
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/armada-370-xp.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/armada-370-xp.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,22 @@
+/*
+ * Generic definitions for Marvell Armada_370_XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_ARMADA_370_XP_H
+#define __MACH_ARMADA_370_XP_H
+
+#define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfeb00000)
+#define ARMADA_370_XP_REGS_SIZE		SZ_1M
+
+#endif /* __MACH_ARMADA_370_XP_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/armada-370-xp.h linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/armada-370-xp.h
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/armada-370-xp.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/armada-370-xp.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,22 +0,0 @@
-/*
- * Generic definitions for Marvell Armada_370_XP SoCs
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_ARMADA_370_XP_H
-#define __MACH_ARMADA_370_XP_H
-
-#define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
-#define ARMADA_370_XP_REGS_SIZE		SZ_1M
-
-#endif /* __MACH_ARMADA_370_XP_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/debug-macro.S linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/debug-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/debug-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
@@ -1,24 +0,0 @@
-/*
- * Early serial output macro for Marvell  SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory Clement <gregory.clement@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/armada-370-xp.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =ARMADA_370_XP_REGS_PHYS_BASE
-	ldr	\rv, =ARMADA_370_XP_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/gpio.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1 @@
+/* empty */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/timex.h linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/timex.h
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/timex.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,13 +0,0 @@
-/*
- * Marvell Armada SoC time definitions
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/uncompress.h linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/uncompress.h
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/include/mach/uncompress.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,43 +0,0 @@
-/*
- * Marvell Armada SoC kernel uncompression UART routines
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/armada-370-xp.h>
-
-#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
-								+ 0x12000))
-#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
-								+ 0x12014))
-
-#define LSR_THRE	0x20
-
-static void putc(const char c)
-{
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		/* Transmit fifo not full? */
-		if (*UART_LSR & LSR_THRE)
-			break;
-	}
-
-	*UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/Kconfig linux-libre-3.7-gnu/arch/arm/mach-mvebu/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,15 +1,39 @@
+config ARCH_MVEBU
+	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+	select CLKSRC_MMIO
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+	select PINCTRL
+	select PLAT_ORION
+	select SPARSE_IRQ
+
 if ARCH_MVEBU
 
 menu "Marvell SOC with device tree"
 
 config MACH_ARMADA_370_XP
-	bool "Marvell Armada 370 and Aramada XP boards"
+	bool
 	select ARMADA_370_XP_TIMER
 	select CPU_V7
+
+config MACH_ARMADA_370
+	bool "Marvell Armada 370 boards"
+	select MACH_ARMADA_370_XP
+	select PINCTRL_ARMADA_370
 	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 370 SoC with device tree.
 
-	  Say 'Y' here if you want your kernel to support boards based on
-	  Marvell Armada 370 or Armada XP with device tree.
+config MACH_ARMADA_XP
+	bool "Marvell Armada XP boards"
+	select MACH_ARMADA_370_XP
+	select PINCTRL_ARMADA_XP
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada XP SoC with device tree.
 
 endmenu
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/Makefile linux-libre-3.7-gnu/arch/arm/mach-mvebu/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -1,2 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+	-I$(srctree)/arch/arm/plat-orion/include
+
 obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mvebu/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-mvebu/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-mvebu/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mvebu/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
@@ -1,3 +0,0 @@
-zreladdr-y := 0x00008000
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/Kconfig linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/Kconfig	1969-12-31 19:00:00.000000000 -0500
@@ -1,33 +0,0 @@
-config MXS_HAVE_AMBA_DUART
-	bool
-
-config MXS_HAVE_PLATFORM_AUART
-	bool
-
-config MXS_HAVE_PLATFORM_FEC
-	bool
-
-config MXS_HAVE_PLATFORM_FLEXCAN
-	select HAVE_CAN_FLEXCAN if CAN
-	bool
-
-config MXS_HAVE_PLATFORM_GPMI_NAND
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_I2C
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_MMC
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_PWM
-	bool
-
-config MXS_HAVE_PLATFORM_MXSFB
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_SAIF
-	bool
-
-config MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	bool
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/Makefile linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/Makefile	1969-12-31 19:00:00.000000000 -0500
@@ -1,12 +0,0 @@
-obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
-obj-y += platform-dma.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
-obj-y += platform-gpio-mxs.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-auart.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-auart.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-auart.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-auart.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_auart_data_entry_single(soc, _id, hwid)			\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _AUART ## hwid ## _BASE_ADDR,		\
-		.irq = soc ## _INT_AUART ## hwid,			\
-	}
-
-#define mxs_auart_data_entry(soc, _id, hwid)				\
-	[_id] = mxs_auart_data_entry_single(soc, _id, hwid)
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_auart_data mx23_auart_data[] __initconst = {
-#define mx23_auart_data_entry(_id, hwid)				\
-	mxs_auart_data_entry(MX23, _id, hwid)
-	mx23_auart_data_entry(0, 1),
-	mx23_auart_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_auart_data mx28_auart_data[] __initconst = {
-#define mx28_auart_data_entry(_id)					\
-	mxs_auart_data_entry(MX28, _id, _id)
-	mx28_auart_data_entry(0),
-	mx28_auart_data_entry(1),
-	mx28_auart_data_entry(2),
-	mx28_auart_data_entry(3),
-	mx28_auart_data_entry(4),
-};
-#endif
-
-struct platform_device *__init mxs_add_auart(
-		const struct mxs_auart_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("mxs-auart", data->id,
-					res, ARRAY_SIZE(res), NULL, 0,
-					DMA_BIT_MASK(32));
-}
-
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-dma.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-dma.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-dma.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-dma.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,31 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_dma(const char *devid,
-						resource_size_t base)
-{
-	struct resource res[] = {
-		{
-			.start = base,
-			.end = base + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}
-	};
-
-	return mxs_add_platform_device_dmamask(devid, -1,
-				res, ARRAY_SIZE(res), NULL, 0,
-				DMA_BIT_MASK(32));
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-fec.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-fec.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-fec.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-fec.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_fec_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR,	\
-		.irq = soc ## _INT_ENET_MAC ## _id,			\
-	}
-
-#define mxs_fec_data_entry(soc, _id)					\
-	[_id] = mxs_fec_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_fec_data mx28_fec_data[] __initconst = {
-#define mx28_fec_data_entry(_id)					\
-	mxs_fec_data_entry(MX28, _id)
-	mx28_fec_data_entry(0),
-	mx28_fec_data_entry(1),
-};
-#endif
-
-struct platform_device *__init mxs_add_fec(
-		const struct mxs_fec_data *data,
-		const struct fec_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx28-fec", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
-			DMA_BIT_MASK(32));
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-flexcan.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-flexcan.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-flexcan.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-flexcan.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2010, 2011 Pengutronix,
- *                          Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_CAN ## _hwid,			\
-	}
-
-#define mxs_flexcan_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
-#define mx28_flexcan_data_entry(_id, _hwid)				\
-	mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
-	mx28_flexcan_data_entry(0, 0),
-	mx28_flexcan_data_entry(1, 1),
-};
-#endif /* ifdef CONFIG_SOC_IMX28 */
-
-struct platform_device *__init mxs_add_flexcan(
-		const struct mxs_flexcan_data *data,
-		const struct flexcan_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("flexcan", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-gpio-mxs.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-gpio-mxs.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-gpio-mxs.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,33 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_gpio(
-	char *name, int id, resource_size_t iobase, int irq)
-{
-	struct resource res[] = {
-		{
-			.start = iobase,
-			.end = iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = irq,
-			.end = irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return platform_device_register_resndata(&mxs_apbh_bus,
-			name, id, res, ARRAY_SIZE(res), NULL, 0);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-gpmi-nand.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-gpmi-nand.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-gpmi-nand.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/dma-mapping.h>
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
-	.devid = "imx23-gpmi-nand",
-	.res = {
-		/* GPMI */
-		DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
-					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
-					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-		/* BCH */
-		DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
-					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
-					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-		/* DMA */
-		DEFINE_RES_NAMED(MX23_DMA_GPMI0,
-					MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME,
-					IORESOURCE_DMA),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
-					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-	},
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
-	.devid = "imx28-gpmi-nand",
-	.res = {
-		/* GPMI */
-		DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
-					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
-					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-		/* BCH */
-		DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
-					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
-					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-		/* DMA */
-		DEFINE_RES_NAMED(MX28_DMA_GPMI0,
-					MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME,
-					IORESOURCE_DMA),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
-					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-	},
-};
-#endif
-
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-		const struct mxs_gpmi_nand_data *data)
-{
-	return mxs_add_platform_device_dmamask(data->devid, -1,
-				data->res, GPMI_NAND_RES_SIZE,
-				pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxsfb.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxsfb.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxsfb.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxsfb.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_mxsfb(
-		const struct mxsfb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = MX23_LCDIF_BASE_ADDR,
-			.end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx23-fb", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_mxsfb(
-		const struct mxsfb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = MX28_LCDIF_BASE_ADDR,
-			.end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx28-fb", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX28 */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-i2c.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-i2c.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-i2c.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix
- * Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_i2c_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _I2C ## _id ## _BASE_ADDR,		\
-		.errirq = soc ## _INT_I2C ## _id ## _ERROR,		\
-		.dmairq = soc ## _INT_I2C ## _id ## _DMA,		\
-	}
-
-#define mxs_i2c_data_entry(soc, _id)					\
-	[_id] = mxs_i2c_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
-	mxs_i2c_data_entry(MX28, 0),
-	mxs_i2c_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_i2c(
-		const struct mxs_mxs_i2c_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->errirq,
-			.end = data->errirq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->dmairq,
-			.end = data->dmairq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("mxs-i2c", data->id, res,
-					ARRAY_SIZE(res), NULL, 0);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-mmc.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-mmc.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-mmc.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)		\
-	{								\
-		.devid = _devid,					\
-		.id = _id,						\
-		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
-		.dma = soc ## _DMA_SSP ## hwid,				\
-		.irq_err = soc ## _INT_SSP ## hwid ## _ERROR,		\
-		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
-	}
-
-#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid)			\
-	[_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
-
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
-	mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_mmc(
-		const struct mxs_mxs_mmc_data *data,
-		const struct mxs_mmc_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start	= data->iobase,
-			.end	= data->iobase + SZ_8K - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= data->dma,
-			.end	= data->dma,
-			.flags	= IORESOURCE_DMA,
-		}, {
-			.start	= data->irq_err,
-			.end	= data->irq_err,
-			.flags	= IORESOURCE_IRQ,
-		}, {
-			.start	= data->irq_dma,
-			.end	= data->irq_dma,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device(data->devid, data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-pwm.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-pwm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-pwm.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
-{
-	struct resource res = {
-		.flags = IORESOURCE_MEM,
-	};
-
-	res.start = iobase + 0x10 + 0x20 * id;
-	res.end = res.start + 0x1f;
-
-	return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-saif.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-saif.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-mxs-saif.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-mxs-saif.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,61 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_saif_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _SAIF ## _id ## _BASE_ADDR,		\
-		.irq = soc ## _INT_SAIF ## _id,				\
-		.dma = soc ## _DMA_SAIF ## _id,				\
-		.dmairq = soc ## _INT_SAIF ## _id ##_DMA,		\
-	}
-
-#define mxs_saif_data_entry(soc, _id)					\
-	[_id] = mxs_saif_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_saif_data mx28_saif_data[] __initconst = {
-	mxs_saif_data_entry(MX28, 0),
-	mxs_saif_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
-				const struct mxs_saif_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->dma,
-			.end = data->dma,
-			.flags = IORESOURCE_DMA,
-		}, {
-			.start = data->dmairq,
-			.end = data->dmairq,
-			.flags = IORESOURCE_IRQ,
-		},
-
-	};
-
-	return mxs_add_platform_device("mxs-saif", data->id, res,
-				ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
-{
-	struct resource res[] = {
-		{
-			.start = MX23_RTC_BASE_ADDR,
-			.end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = MX23_INT_RTC_ALARM,
-			.end = MX23_INT_RTC_ALARM,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-					NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
-{
-	struct resource res[] = {
-		{
-			.start = MX28_RTC_BASE_ADDR,
-			.end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = MX28_INT_RTC_ALARM,
-			.end = MX28_INT_RTC_ALARM,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-					NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX28 */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices.c linux-libre-3.7-gnu/arch/arm/mach-mxs/devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,87 +0,0 @@
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-
-struct platform_device *__init mxs_add_platform_device_dmamask(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data, u64 dmamask)
-{
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		goto err;
-
-	if (dmamask) {
-		/*
-		 * This memory isn't freed when the device is put,
-		 * I don't have a nice idea for that though.  Conceptually
-		 * dma_mask in struct device should not be a pointer.
-		 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
-		 */
-		pdev->dev.dma_mask =
-			kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
-		if (!pdev->dev.dma_mask)
-			/* ret is still -ENOMEM; */
-			goto err;
-
-		*pdev->dev.dma_mask = dmamask;
-		pdev->dev.coherent_dma_mask = dmamask;
-	}
-
-	if (res) {
-		ret = platform_device_add_resources(pdev, res, num_resources);
-		if (ret)
-			goto err;
-	}
-
-	if (data) {
-		ret = platform_device_add_data(pdev, data, size_data);
-		if (ret)
-			goto err;
-	}
-
-	ret = platform_device_add(pdev);
-	if (ret) {
-err:
-		if (dmamask)
-			kfree(pdev->dev.dma_mask);
-		platform_device_put(pdev);
-		return ERR_PTR(ret);
-	}
-
-	return pdev;
-}
-
-struct device mxs_apbh_bus = {
-	.init_name	= "mxs_apbh",
-	.parent         = &platform_bus,
-};
-
-static int __init mxs_device_init(void)
-{
-	return device_register(&mxs_apbh_bus);
-}
-core_initcall(mxs_device_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices-mx23.h linux-libre-3.7-gnu/arch/arm/mach-mxs/devices-mx23.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices-mx23.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices-mx23.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx23.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx23_add_duart(void)
-{
-	struct amba_device *d;
-
-	d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
-				MX23_INT_DUART, 0, 0, 0);
-	return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx23_auart_data[] __initconst;
-#define mx23_add_auart(id)	mxs_add_auart(&mx23_auart_data[id])
-#define mx23_add_auart0()		mx23_add_auart(0)
-#define mx23_add_auart1()		mx23_add_auart(1)
-
-extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
-#define mx23_add_gpmi_nand(pdata)	\
-	mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
-
-extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
-#define mx23_add_mxs_mmc(id, pdata) \
-	mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
-
-#define mx23_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx23_add_mxsfb(
-		const struct mxsfb_platform_data *pdata);
-
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/devices-mx28.h linux-libre-3.7-gnu/arch/arm/mach-mxs/devices-mx28.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/devices-mx28.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/devices-mx28.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx28_add_duart(void)
-{
-	struct amba_device *d;
-
-	d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
-				MX28_INT_DUART, 0, 0, 0);
-	return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx28_auart_data[] __initconst;
-#define mx28_add_auart(id)	mxs_add_auart(&mx28_auart_data[id])
-#define mx28_add_auart0()		mx28_add_auart(0)
-#define mx28_add_auart1()		mx28_add_auart(1)
-#define mx28_add_auart2()		mx28_add_auart(2)
-#define mx28_add_auart3()		mx28_add_auart(3)
-#define mx28_add_auart4()		mx28_add_auart(4)
-
-extern const struct mxs_fec_data mx28_fec_data[] __initconst;
-#define mx28_add_fec(id, pdata) \
-	mxs_add_fec(&mx28_fec_data[id], pdata)
-
-extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
-#define mx28_add_flexcan(id, pdata)	\
-	mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
-#define mx28_add_flexcan0(pdata)	mx28_add_flexcan(0, pdata)
-#define mx28_add_flexcan1(pdata)	mx28_add_flexcan(1, pdata)
-
-extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
-#define mx28_add_gpmi_nand(pdata)	\
-	mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
-
-extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
-#define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
-
-extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
-#define mx28_add_mxs_mmc(id, pdata) \
-	mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
-
-#define mx28_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx28_add_mxsfb(
-		const struct mxsfb_platform_data *pdata);
-
-extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id, pdata) \
-	mxs_add_saif(&mx28_saif_data[id], pdata)
-
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/icoll.c linux-libre-3.7-gnu/arch/arm/mach-mxs/icoll.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/icoll.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/icoll.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,20 +19,27 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/io.h>
-
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <asm/exception.h>
 #include <mach/mxs.h>
 #include <mach/common.h>
 
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
+#define HW_ICOLL_STAT_OFFSET			0x0070
 #define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
 #define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
 #define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
+#define ICOLL_NUM_IRQS		128
+
 static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
+static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
 {
@@ -48,13 +55,13 @@
 static void icoll_mask_irq(struct irq_data *d)
 {
 	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->irq));
+			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
 	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->irq));
+			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -63,18 +70,56 @@
 	.irq_unmask = icoll_unmask_irq,
 };
 
-void __init icoll_init_irq(void)
+asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
-	int i;
+	u32 irqnr;
+
+	do {
+		irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
+		if (irqnr != 0x7f) {
+			__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+			irqnr = irq_find_mapping(icoll_domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+		break;
+	} while (1);
+}
 
+static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID);
+
+	return 0;
+}
+
+static struct irq_domain_ops icoll_irq_domain_ops = {
+	.map = icoll_irq_domain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+void __init icoll_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
 	mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
 
-	for (i = 0; i < MXS_INTERNAL_IRQS; i++) {
-		irq_set_chip_and_handler(i, &mxs_icoll_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
+	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
+					     &icoll_irq_domain_ops, NULL);
+	WARN_ON(!icoll_domain);
+}
+
+static const struct of_device_id icoll_of_match[] __initconst = {
+	{.compatible = "fsl,icoll", .data = icoll_of_init},
+	{ /* sentinel */ }
+};
+
+void __init icoll_init_irq(void)
+{
+	of_irq_init(icoll_of_match);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/common.h linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -13,25 +13,17 @@
 
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(int);
+extern void mxs_timer_init(void);
 extern void mxs_restart(char, const char *);
 extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
-extern void mx23_soc_init(void);
 extern int mx23_clocks_init(void);
 extern void mx23_map_io(void);
-extern void mx23_init_irq(void);
 
-extern void mx28_soc_init(void);
 extern int mx28_clocks_init(void);
 extern void mx28_map_io(void);
-extern void mx28_init_irq(void);
 
 extern void icoll_init_irq(void);
-
-extern struct platform_device *mxs_add_dma(const char *devid,
-						resource_size_t base);
-extern struct platform_device *mxs_add_gpio(char *name, int id,
-					    resource_size_t iobase, int irq);
+extern void icoll_handle_irq(struct pt_regs *);
 
 #endif /* __MACH_MXS_COMMON_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/devices-common.h linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/devices-common.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/devices-common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/devices-common.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/amba/bus.h>
-
-extern struct device mxs_apbh_bus;
-
-struct platform_device *mxs_add_platform_device_dmamask(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data, u64 dmamask);
-
-static inline struct platform_device *mxs_add_platform_device(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data)
-{
-	return mxs_add_platform_device_dmamask(
-			name, id, res, num_resources, data, size_data, 0);
-}
-
-/* auart */
-struct mxs_auart_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_auart(
-		const struct mxs_auart_data *data);
-
-/* fec */
-#include <linux/fec.h>
-struct mxs_fec_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_fec(
-		const struct mxs_fec_data *data,
-		const struct fec_platform_data *pdata);
-
-/* flexcan */
-#include <linux/can/platform/flexcan.h>
-struct mxs_flexcan_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_flexcan(
-		const struct mxs_flexcan_data *data,
-		const struct flexcan_platform_data *pdata);
-
-/* gpmi-nand */
-#include <linux/mtd/gpmi-nand.h>
-struct mxs_gpmi_nand_data {
-	const char *devid;
-	const struct resource res[GPMI_NAND_RES_SIZE];
-};
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-		const struct mxs_gpmi_nand_data *data);
-
-/* i2c */
-struct mxs_mxs_i2c_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t errirq;
-	resource_size_t dmairq;
-};
-struct platform_device * __init mxs_add_mxs_i2c(
-		const struct mxs_mxs_i2c_data *data);
-
-/* mmc */
-#include <linux/mmc/mxs-mmc.h>
-struct mxs_mxs_mmc_data {
-	const char *devid;
-	int id;
-	resource_size_t iobase;
-	resource_size_t dma;
-	resource_size_t irq_err;
-	resource_size_t irq_dma;
-};
-struct platform_device *__init mxs_add_mxs_mmc(
-		const struct mxs_mxs_mmc_data *data,
-		const struct mxs_mmc_platform_data *pdata);
-
-/* pwm */
-struct platform_device *__init mxs_add_mxs_pwm(
-		resource_size_t iobase, int id);
-
-/* saif */
-#include <sound/saif.h>
-struct mxs_saif_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t irq;
-	resource_size_t dma;
-	resource_size_t dmairq;
-};
-
-struct platform_device *__init mxs_add_saif(
-		const struct mxs_saif_data *data,
-		const struct mxs_saif_platform_data *pdata);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/entry-macro.S linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/entry-macro.S
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/entry-macro.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/entry-macro.S	1969-12-31 19:00:00.000000000 -0500
@@ -1,35 +0,0 @@
-/*
- * Low-level IRQ helper macros for Freescale MXS-based
- *
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <mach/mxs.h>
-
-#define MXS_ICOLL_VBASE		MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
-#define HW_ICOLL_STAT_OFFSET	0x70
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
-	cmp	\irqnr, #0x7F
-	strne	\irqnr, [\base]
-	moveqs	\irqnr, #0
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MXS_ICOLL_VBASE
-	.endm
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1 +0,0 @@
-/* empty */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/iomux.h linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/iomux.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/iomux.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/iomux.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *			<armlinux@phytec.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_IOMUX_H__
-#define __MACH_MXS_IOMUX_H__
-
-/*
- * IOMUX/PAD Bit field definitions
- *
- * PAD_BANK:		 0..2	(3)
- * PAD_PIN:		 3..7	(5)
- * PAD_MUXSEL:		 8..9	(2)
- * PAD_MA:		10..11	(2)
- * PAD_MA_VALID:	12	(1)
- * PAD_VOL:		13	(1)
- * PAD_VOL_VALID:	14	(1)
- * PAD_PULL:		15	(1)
- * PAD_PULL_VALID:	16	(1)
- * RESERVED:		17..31	(15)
- */
-typedef u32 iomux_cfg_t;
-
-#define MXS_PAD_BANK_SHIFT	0
-#define MXS_PAD_BANK_MASK	((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
-#define MXS_PAD_PIN_SHIFT	3
-#define MXS_PAD_PIN_MASK	((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
-#define MXS_PAD_MUXSEL_SHIFT	8
-#define MXS_PAD_MUXSEL_MASK	((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
-#define MXS_PAD_MA_SHIFT	10
-#define MXS_PAD_MA_MASK		((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
-#define MXS_PAD_MA_VALID_SHIFT	12
-#define MXS_PAD_MA_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
-#define MXS_PAD_VOL_SHIFT	13
-#define MXS_PAD_VOL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
-#define MXS_PAD_VOL_VALID_SHIFT	14
-#define MXS_PAD_VOL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
-#define MXS_PAD_PULL_SHIFT	15
-#define MXS_PAD_PULL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
-#define MXS_PAD_PULL_VALID_SHIFT 16
-#define MXS_PAD_PULL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
-
-#define PAD_MUXSEL_0		0
-#define PAD_MUXSEL_1		1
-#define PAD_MUXSEL_2		2
-#define PAD_MUXSEL_GPIO		3
-
-#define PAD_4MA			0
-#define PAD_8MA			1
-#define PAD_12MA		2
-#define PAD_16MA		3
-
-#define PAD_1V8			0
-#define PAD_3V3			1
-
-#define PAD_NOPULL		0
-#define PAD_PULLUP		1
-
-#define MXS_PAD_4MA	((PAD_4MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_8MA	((PAD_8MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_12MA	((PAD_12MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_16MA	((PAD_16MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-
-#define MXS_PAD_1V8	((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
-					MXS_PAD_VOL_VALID_MASK)
-#define MXS_PAD_3V3	((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
-					MXS_PAD_VOL_VALID_MASK)
-
-#define MXS_PAD_NOPULL	((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
-					MXS_PAD_PULL_VALID_MASK)
-#define MXS_PAD_PULLUP	((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
-					MXS_PAD_PULL_VALID_MASK)
-
-/* generic pad control used in most cases */
-#define MXS_PAD_CTRL	(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
-
-#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)		\
-		(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |		\
-		((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |		\
-		((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) |	\
-		((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) |		\
-		((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) |		\
-		((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
-
-/*
- * A pad becomes naked, when none of mA, vol or pull
- * validity bits is set.
- */
-#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
-		MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
-
-static inline unsigned int PAD_BANK(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
-}
-
-static inline unsigned int PAD_PIN(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
-}
-
-static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
-}
-
-static inline unsigned int PAD_MA(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
-}
-
-static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_VOL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
-}
-
-static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_PULL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
-}
-
-static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
-}
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad);
-
-/*
- * configures multiple pads
- * convenient way to call the above function with tables
- */
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
-
-#endif /* __MACH_MXS_IOMUX_H__*/
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/iomux-mx23.h linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/iomux-mx23.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/iomux-mx23.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/iomux-mx23.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX23_H__
-#define __MACH_IOMUX_MX23_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *									BANK	PIN	MUX
- */
-/* MUXSEL_0 */
-#define MX23_PAD_GPMI_D00__GPMI_D00		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D01__GPMI_D01		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D02__GPMI_D02		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D03__GPMI_D03		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D04__GPMI_D04		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D05__GPMI_D05		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D06__GPMI_D06		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D07__GPMI_D07		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D08__GPMI_D08		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D09__GPMI_D09		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D10__GPMI_D10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D11__GPMI_D11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D12__GPMI_D12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D13__GPMI_D13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D14__GPMI_D14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D15__GPMI_D15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CLE__GPMI_CLE		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_ALE__GPMI_ALE		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WPN__GPMI_WPN		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WRN__GPMI_WRN		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDN__GPMI_RDN		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_CTS__AUART1_CTS		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RTS__AUART1_RTS		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RX__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_TX__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SCL__I2C_SCL		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SDA__I2C_SDA		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_LCD_D00__LCD_D00		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D01__LCD_D01		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D02__LCD_D02		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D03__LCD_D03		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D04__LCD_D04		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D05__LCD_D05		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D06__LCD_D06		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D07__LCD_D07		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D08__LCD_D08		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D09__LCD_D09		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D10__LCD_D10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D11__LCD_D11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D12__LCD_D12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D13__LCD_D13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D14__LCD_D14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D15__LCD_D15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D16__LCD_D16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D17__LCD_D17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RESET__LCD_RESET		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RS__LCD_RS			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_WR__LCD_WR			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_CS__LCD_CS			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX23_PAD_PWM0__PWM0			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX23_PAD_PWM1__PWM1			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX23_PAD_PWM2__PWM2			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX23_PAD_PWM3__PWM3			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX23_PAD_PWM4__PWM4			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-
-#define MX23_PAD_SSP1_CMD__SSP1_CMD		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_SCK__SSP1_SCK		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYA__ROTARYA		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYB__ROTARYB		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A00__EMI_A00		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A01__EMI_A01		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A02__EMI_A02		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A03__EMI_A03		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A04__EMI_A04		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A05__EMI_A05		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A06__EMI_A06		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A07__EMI_A07		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A08__EMI_A08		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A09__EMI_A09		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A10__EMI_A10		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A11__EMI_A11		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A12__EMI_A12		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA0__EMI_BA0		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA1__EMI_BA1		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CASN__EMI_CASN		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE0N__EMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE1N__EMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CKE__EMI_CKE		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_RASN__EMI_RASN		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_WEN__EMI_WEN		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_EMI_D00__EMI_D00		MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D01__EMI_D01		MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D02__EMI_D02		MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D03__EMI_D03		MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D04__EMI_D04		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D05__EMI_D05		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D06__EMI_D06		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D07__EMI_D07		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D08__EMI_D08		MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D09__EMI_D09		MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D10__EMI_D10		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D11__EMI_D11		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D12__EMI_D12		MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D13__EMI_D13		MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D14__EMI_D14		MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D15__EMI_D15		MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM0__EMI_DQM0		MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM1__EMI_DQM1		MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS0__EMI_DQS0		MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS1__EMI_DQS1		MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLK__EMI_CLK		MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLKN__EMI_CLKN		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX23_PAD_GPMI_D00__LCD_D8		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D01__LCD_D9		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D02__LCD_D10		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D03__LCD_D11		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D04__LCD_D12		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D05__LCD_D13		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D06__LCD_D14		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D07__LCD_D15		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D08__LCD_D18		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D09__LCD_D19		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D10__LCD_D20		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D11__LCD_D21		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D12__LCD_D22		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D13__LCD_D23		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D14__AUART2_RX		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D15__AUART2_TX		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CLE__LCD_D16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_ALE__LCD_D17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CE2N__ATA_A2		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RTS__IR_CLK		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RX__IR_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_TX__IR_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SCL__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SDA__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
-
-#define MX23_PAD_LCD_D00__ETM_DA8		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D01__ETM_DA9		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D02__ETM_DA10		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D03__ETM_DA11		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D04__ETM_DA12		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D05__ETM_DA13		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D06__ETM_DA14		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D07__ETM_DA15		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D08__ETM_DA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D09__ETM_DA1		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D10__ETM_DA2		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D11__ETM_DA3		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D12__ETM_DA4		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D13__ETM_DA5		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D14__ETM_DA6		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D15__ETM_DA7		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RESET__ETM_TCTL		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RS__ETM_TCLK		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_ENABLE__I2C_SCL		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_HSYNC__I2C_SDA		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX23_PAD_PWM0__ROTARYA			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX23_PAD_PWM1__ROTARYB			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX23_PAD_PWM2__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX23_PAD_PWM3__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX23_PAD_PWM4__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA1__I2C_SCL		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA2__I2C_SDA		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYA__AUART2_RTS		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYB__AUART2_CTS		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX23_PAD_GPMI_D00__SSP2_DATA0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D01__SSP2_DATA1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D02__SSP2_DATA2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D03__SSP2_DATA3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D04__SSP2_DATA4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D05__SSP2_DATA5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D06__SSP2_DATA6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D07__SSP2_DATA7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D08__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D09__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D10__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D11__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D15__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_WRN__SSP2_SCK		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RX__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_TX__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SCL__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SDA__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
-
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK	MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D11__SAIF_LRCLK		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK	MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_RESET__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX23_PAD_PWM0__DUART_RX			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
-#define MX23_PAD_PWM1__DUART_TX			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
-#define MX23_PAD_PWM3__AUART1_CTS		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX23_PAD_PWM4__AUART1_RTS		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX23_PAD_SSP1_CMD__JTAG_TDO		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_SCK__JTAG_TRST		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYA__SPDIF			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYB__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPIO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPIO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPIO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPIO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPIO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPIO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPIO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPIO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPIO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPIO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPIO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPIO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPIO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPIO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPIO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPIO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPIO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPIO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPIO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPIO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPIO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPIO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPIO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPIO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPIO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPIO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPIO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_LCD_D00__GPIO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPIO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPIO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPIO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPIO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPIO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPIO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPIO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPIO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPIO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPIO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPIO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPIO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPIO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPIO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPIO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPIO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPIO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPIO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPIO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPIO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPIO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPIO_1_26		MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPIO_1_27		MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPIO_1_28		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPIO_1_29		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPIO_1_30		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_SSP1_CMD__GPIO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPIO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPIO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPIO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPIO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPIO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPIO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPIO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPIO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPIO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPIO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPIO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPIO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPIO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPIO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPIO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPIO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPIO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPIO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPIO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPIO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPIO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPIO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPIO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPIO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX23_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/iomux-mx28.h linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/iomux-mx28.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/iomux-mx28.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/iomux-mx28.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,537 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX28_H__
-#define __MACH_IOMUX_MX28_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *									BANK	PIN	MUX
- */
-/* MUXSEL_0 */
-#define MX28_PAD_GPMI_D00__GPMI_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D01__GPMI_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D02__GPMI_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D03__GPMI_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D04__GPMI_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D05__GPMI_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D06__GPMI_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D07__GPMI_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDN__GPMI_RDN			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_WRN__GPMI_WRN			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_ALE__GPMI_ALE			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CLE__GPMI_CLE			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-
-#define MX28_PAD_LCD_D00__LCD_D0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D01__LCD_D1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D02__LCD_D2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D03__LCD_D3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D04__LCD_D4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D05__LCD_D5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D06__LCD_D6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D07__LCD_D7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D08__LCD_D8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D09__LCD_D9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D10__LCD_D10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D11__LCD_D11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D12__LCD_D12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D13__LCD_D13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D14__LCD_D14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D15__LCD_D15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D16__LCD_D16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D17__LCD_D17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D18__LCD_D18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D19__LCD_D19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D20__LCD_D20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D21__LCD_D21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D22__LCD_D22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D23__LCD_D23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RD_E__LCD_RD_E			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RS__LCD_RS				MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_CS__LCD_CS				MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
-
-#define MX28_PAD_SSP0_DATA0__SSP0_D0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA1__SSP0_D1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA2__SSP0_D2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA3__SSP0_D3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA4__SSP0_D4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA5__SSP0_D5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA6__SSP0_D6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA7__SSP0_D7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_CMD__SSP0_CMD			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_SCK__SSP0_SCK			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_SCK__SSP1_SCK			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_CMD__SSP1_CMD			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA0__SSP1_D0			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA3__SSP1_D3			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SCK__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MISO__SSP2_D0			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS0__SSP2_D3			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS1__SSP2_D4			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS2__SSP2_D5			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SCK__SSP3_SCK			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MISO__SSP3_D0			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SS0__SSP3_D3			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-
-#define MX28_PAD_AUART0_RX__AUART0_RX			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_TX__AUART0_TX			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_CTS__AUART0_CTS			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_RTS__AUART0_RTS			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RX__AUART1_RX			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_TX__AUART1_TX			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_CTS__AUART1_CTS			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RTS__AUART1_RTS			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RX__AUART2_RX			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_TX__AUART2_TX			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_CTS__AUART2_CTS			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RTS__AUART2_RTS			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RX__AUART3_RX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_TX__AUART3_TX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_CTS__AUART3_CTS			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RTS__AUART3_RTS			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX28_PAD_PWM0__PWM_0				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX28_PAD_PWM1__PWM_1				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX28_PAD_PWM2__PWM_2				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SCL__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SDA__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SPDIF__SPDIF_TX			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
-#define MX28_PAD_PWM3__PWM_3				MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
-#define MX28_PAD_PWM4__PWM_4				MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RESET__LCD_RESET			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
-
-#define MX28_PAD_ENET0_MDC__ENET0_MDC			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_COL__ENET0_COL			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_CRS__ENET0_CRS			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_D00__EMI_DATA0			MXS_IOMUX_PAD_NAKED(5,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D01__EMI_DATA1			MXS_IOMUX_PAD_NAKED(5,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D02__EMI_DATA2			MXS_IOMUX_PAD_NAKED(5,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D03__EMI_DATA3			MXS_IOMUX_PAD_NAKED(5,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D04__EMI_DATA4			MXS_IOMUX_PAD_NAKED(5,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D05__EMI_DATA5			MXS_IOMUX_PAD_NAKED(5,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D06__EMI_DATA6			MXS_IOMUX_PAD_NAKED(5,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D07__EMI_DATA7			MXS_IOMUX_PAD_NAKED(5,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D08__EMI_DATA8			MXS_IOMUX_PAD_NAKED(5,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D09__EMI_DATA9			MXS_IOMUX_PAD_NAKED(5,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D10__EMI_DATA10			MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D11__EMI_DATA11			MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D12__EMI_DATA12			MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D13__EMI_DATA13			MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D14__EMI_DATA14			MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D15__EMI_DATA15			MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT0__EMI_ODT0			MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM0__EMI_DQM0			MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT1__EMI_ODT1			MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM1__EMI_DQM1			MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CLK__EMI_CLK			MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS0__EMI_DQS0			MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS1__EMI_DQS1			MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_A00__EMI_ADDR0			MXS_IOMUX_PAD_NAKED(6,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A01__EMI_ADDR1			MXS_IOMUX_PAD_NAKED(6,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A02__EMI_ADDR2			MXS_IOMUX_PAD_NAKED(6,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A03__EMI_ADDR3			MXS_IOMUX_PAD_NAKED(6,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A04__EMI_ADDR4			MXS_IOMUX_PAD_NAKED(6,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A05__EMI_ADDR5			MXS_IOMUX_PAD_NAKED(6,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A06__EMI_ADDR6			MXS_IOMUX_PAD_NAKED(6,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A07__EMI_ADDR7			MXS_IOMUX_PAD_NAKED(6,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A08__EMI_ADDR8			MXS_IOMUX_PAD_NAKED(6,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A09__EMI_ADDR9			MXS_IOMUX_PAD_NAKED(6,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A10__EMI_ADDR10			MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A11__EMI_ADDR11			MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A12__EMI_ADDR12			MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A13__EMI_ADDR13			MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A14__EMI_ADDR14			MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA0__EMI_BA0			MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA1__EMI_BA1			MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA2__EMI_BA2			MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CASN__EMI_CASN			MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_RASN__EMI_RASN			MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_WEN__EMI_WEN			MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE0N__EMI_CE0N			MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE1N__EMI_CE1N			MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CKE__EMI_CKE			MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX28_PAD_GPMI_D00__SSP1_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D01__SSP1_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D02__SSP1_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D03__SSP1_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D04__SSP1_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D05__SSP1_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D06__SSP1_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D07__SSP1_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE0N__SSP3_D0			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE1N__SSP3_D3			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE2N__CAN1_TX			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE3N__CAN1_RX			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY2__CAN0_TX			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY3__CAN0_RX			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDN__SSP3_SCK			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_WRN__SSP1_SCK			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_ALE__SSP3_D1			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CLE__SSP3_D2			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-
-#define MX28_PAD_LCD_D03__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D04__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D08__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D09__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RS__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_CS__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_SSP0_DATA4__SSP2_D0			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA5__SSP2_D3			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_SCK__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_CMD__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA0__SSP2_D6			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA3__SSP2_D7			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SCK__AUART2_RX			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MOSI__AUART2_TX			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MISO__AUART3_RX			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS0__AUART3_TX			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS1__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS2__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SCK__AUART4_TX			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MOSI__AUART4_RX			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MISO__AUART4_RTS			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SS0__AUART4_CTS			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
-
-#define MX28_PAD_AUART0_RX__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_TX__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_CTS__AUART4_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_RTS__AUART4_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RTS__USB0_ID			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RX__SSP3_D1			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_TX__SSP3_D2			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_CTS__I2C1_SCL			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RTS__I2C1_SDA			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RX__CAN0_TX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_TX__CAN0_RX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_CTS__CAN1_TX			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RTS__CAN1_RX			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
-#define MX28_PAD_PWM0__I2C1_SCL				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
-#define MX28_PAD_PWM1__I2C1_SDA				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
-#define MX28_PAD_PWM2__USB0_ID				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_MCLK__PWM_3			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_LRCLK__PWM_4			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_BITCLK__PWM_5			MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_SDATA0__PWM_6			MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF1_SDATA0__PWM_7			MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RESET__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4		MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6		MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7		MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY0__USB0_ID			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_ALE__SSP3_D4			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CLE__SSP3_D5			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_LCD_D00__ETM_DA0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D01__ETM_DA1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D02__ETM_DA2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D03__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D04__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D05__ETM_DA5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D06__ETM_DA6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D07__ETM_DA7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D08__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D09__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D10__ETM_DA10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D11__ETM_DA11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D12__ETM_DA12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D13__ETM_DA13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D14__ETM_DA14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D15__ETM_DA15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D16__ETM_DA7			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D17__ETM_DA6			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D18__ETM_DA5			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D19__ETM_DA4			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D20__ETM_DA3			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D21__ETM_DA2			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D22__ETM_DA1			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D23__ETM_DA0			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_RD_E__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_AUART0_RX__DUART_CTS			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_TX__DUART_RTS			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_CTS__DUART_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_RTS__DUART_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RX__PWM_0			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_TX__PWM_1			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RX__SSP3_D4			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_TX__SSP3_D5			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
-#define MX28_PAD_PWM0__DUART_RX				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
-#define MX28_PAD_PWM1__DUART_TX				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
-#define MX28_PAD_PWM2__USB1_OVERCURRENT			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SCL__DUART_RX			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SDA__DUART_TX			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SPDIF__ENET1_RX_ER			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX28_PAD_GPMI_D00__GPIO_0_0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D01__GPIO_0_1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D02__GPIO_0_2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D03__GPIO_0_3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D04__GPIO_0_4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D05__GPIO_0_5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D06__GPIO_0_6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D07__GPIO_0_7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDN__GPIO_0_24			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_WRN__GPIO_0_25			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_ALE__GPIO_0_26			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CLE__GPIO_0_27			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_LCD_D00__GPIO_1_0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D01__GPIO_1_1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D02__GPIO_1_2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D03__GPIO_1_3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D04__GPIO_1_4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D05__GPIO_1_5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D06__GPIO_1_6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D07__GPIO_1_7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D08__GPIO_1_8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D09__GPIO_1_9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D10__GPIO_1_10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D11__GPIO_1_11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D12__GPIO_1_12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D13__GPIO_1_13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D14__GPIO_1_14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D15__GPIO_1_15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D16__GPIO_1_16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D17__GPIO_1_17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D18__GPIO_1_18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D19__GPIO_1_19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D20__GPIO_1_20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D21__GPIO_1_21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D22__GPIO_1_22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D23__GPIO_1_23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RD_E__GPIO_1_24			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RS__GPIO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_CS__GPIO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_CMD__GPIO_2_8			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9			MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_SCK__GPIO_2_10			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_SCK__GPIO_2_12			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_CMD__GPIO_2_13			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SCK__GPIO_2_16			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MISO__GPIO_2_18			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS0__GPIO_2_19			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS1__GPIO_2_20			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS2__GPIO_2_21			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SCK__GPIO_2_24			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MISO__GPIO_2_26			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SS0__GPIO_2_27			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_AUART0_RX__GPIO_3_0			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_TX__GPIO_3_1			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_CTS__GPIO_3_2			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_RTS__GPIO_3_3			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RX__GPIO_3_4			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_TX__GPIO_3_5			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_CTS__GPIO_3_6			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RTS__GPIO_3_7			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RX__GPIO_3_8			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_TX__GPIO_3_9			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_CTS__GPIO_3_10			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RTS__GPIO_3_11			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RX__GPIO_3_12			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_TX__GPIO_3_13			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_CTS__GPIO_3_14			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RTS__GPIO_3_15			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM0__GPIO_3_16			MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM1__GPIO_3_17			MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM2__GPIO_3_18			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SCL__GPIO_3_24			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SDA__GPIO_3_25			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SPDIF__GPIO_3_27			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM3__GPIO_3_28			MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM4__GPIO_3_29			MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RESET__GPIO_3_30			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_ENET0_MDC__GPIO_4_0			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_COL__GPIO_4_14			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_CRS__GPIO_4_15			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET_CLK__GPIO_4_16			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX28_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/irqs.h linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/irqs.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/include/mach/irqs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/include/mach/irqs.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,32 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_IRQS_H__
-#define __MACH_MXS_IRQS_H__
-
-#define MXS_INTERNAL_IRQS	128
-
-#define MXS_GPIO_IRQ_START	MXS_INTERNAL_IRQS
-
-/* the maximum for MXS-based */
-#define MXS_GPIO_IRQS		(32 * 5)
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase MXS_BOARD_IRQS, but keep it
- * within sensible limits.
- */
-#define MXS_BOARD_IRQ_START	(MXS_GPIO_IRQ_START + MXS_GPIO_IRQS)
-#define MXS_BOARD_IRQS		16
-
-#define NR_IRQS			(MXS_BOARD_IRQ_START + MXS_BOARD_IRQS)
-
-#endif /* __MACH_MXS_IRQS_H__ */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/iomux.c linux-libre-3.7-gnu/arch/arm/mach-mxs/iomux.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/iomux.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/iomux.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,101 +0,0 @@
-/*
- * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *                       <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mxs.h>
-#include <mach/iomux.h>
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad)
-{
-	u32 reg, ofs, bp, bm;
-	void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
-
-	/* muxsel */
-	ofs = 0x100;
-	ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
-	bp = PAD_PIN(pad) % 16 * 2;
-	bm = 0x3 << bp;
-	reg = __raw_readl(iomux_base + ofs);
-	reg &= ~bm;
-	reg |= PAD_MUXSEL(pad) << bp;
-	__raw_writel(reg, iomux_base + ofs);
-
-	/* drive */
-	ofs = cpu_is_mx23() ? 0x200 : 0x300;
-	ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
-	/* mA */
-	if (PAD_MA_VALID(pad)) {
-		bp = PAD_PIN(pad) % 8 * 4;
-		bm = 0x3 << bp;
-		reg = __raw_readl(iomux_base + ofs);
-		reg &= ~bm;
-		reg |= PAD_MA(pad) << bp;
-		__raw_writel(reg, iomux_base + ofs);
-	}
-	/* vol */
-	if (PAD_VOL_VALID(pad)) {
-		bp = PAD_PIN(pad) % 8 * 4 + 2;
-		if (PAD_VOL(pad))
-			__mxs_setl(1 << bp, iomux_base + ofs);
-		else
-			__mxs_clrl(1 << bp, iomux_base + ofs);
-	}
-
-	/* pull */
-	if (PAD_PULL_VALID(pad)) {
-		ofs = cpu_is_mx23() ? 0x400 : 0x600;
-		ofs += PAD_BANK(pad) * 0x10;
-		bp = PAD_PIN(pad);
-		if (PAD_PULL(pad))
-			__mxs_setl(1 << bp, iomux_base + ofs);
-		else
-			__mxs_clrl(1 << bp, iomux_base + ofs);
-	}
-
-	return 0;
-}
-
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
-{
-	const iomux_cfg_t *p = pad_list;
-	int i;
-	int ret;
-
-	for (i = 0; i < count; i++) {
-		ret = mxs_iomux_setup_pad(*p);
-		if (ret)
-			return ret;
-		p++;
-	}
-
-	return 0;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/Kconfig linux-libre-3.7-gnu/arch/arm/mach-mxs/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -1,7 +1,5 @@
 if ARCH_MXS
 
-source "arch/arm/mach-mxs/devices/Kconfig"
-
 config SOC_IMX23
 	bool
 	select ARM_AMBA
@@ -27,91 +25,4 @@
 	  Include support for Freescale MXS platforms(i.MX23 and i.MX28)
 	  using the device tree for discovery
 
-config MACH_STMP378X_DEVB
-	bool "Support STMP378x_devb Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for STMP378x-devb platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX23EVK
-	bool "Support MX23EVK Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for MX23EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX28EVK
-	bool "Support MX28EVK Platform"
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for MX28EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MODULE_TX28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_PWM
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-
-config MODULE_M28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-
-config MODULE_APX4
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-
-config MACH_TX28
-	bool "Ka-Ro TX28 module"
-	select MODULE_TX28
-
-config MACH_M28EVK
-	bool "Support DENX M28EVK Platform"
-	select MODULE_M28
-
-config MACH_APX4DEVKIT
-	bool "Support Bluegiga APX4 Development Kit"
-	select MODULE_APX4
-
 endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-apx4devkit.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-apx4devkit.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-apx4devkit.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-apx4devkit.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2011-2012
- * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
- * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
- *
- * based on: mach-mx28evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/micrel_phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define APX4DEVKIT_GPIO_USERLED	MXS_GPIO_NR(3, 28)
-
-static const iomux_cfg_t apx4devkit_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-
-	/* auart1 */
-	MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-
-	/* auart2 */
-	MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-
-	/* i2c */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led apx4devkit_leds[] __initconst = {
-	{
-		.name = "user-led",
-		.default_trigger = "heartbeat",
-		.gpio = APX4DEVKIT_GPIO_USERLED,
-	},
-};
-
-static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
-	.leds = apx4devkit_leds,
-	.num_leds = ARRAY_SIZE(apx4devkit_leds),
-};
-
-static const struct fec_platform_data mx28_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
-	.wp_gpio = -EINVAL,
-	.flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
-	{ I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
-	{ I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
-		defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = apx4devkit_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config apx4devkit_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &apx4devkit_vdd_reg_init_data,
-};
-
-static struct platform_device apx4devkit_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &apx4devkit_vdd_pdata,
-	},
-};
-
-static void __init apx4devkit_add_regulators(void)
-{
-	platform_device_register(&apx4devkit_voltage_regulator);
-}
-#else
-static void __init apx4devkit_add_regulators(void) {}
-#endif
-
-static const struct mxs_saif_platform_data
-			apx4devkit_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static int apx4devkit_phy_fixup(struct phy_device *phy)
-{
-	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
-	return 0;
-}
-
-static void __init apx4devkit_fec_phy_clk_enable(void)
-{
-	struct clk *clk;
-
-	/* Enable fec phy clock */
-	clk = clk_get_sys("enet_out", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-}
-
-static void __init apx4devkit_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
-			ARRAY_SIZE(apx4devkit_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart1();
-	mx28_add_auart2();
-	mx28_add_auart3();
-
-	/*
-	 * Register fixup for the Micrel KS8031 PHY clock
-	 * (shares same ID with KS8051)
-	 */
-	phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
-			apx4devkit_phy_fixup);
-
-	apx4devkit_fec_phy_clk_enable();
-	mx28_add_fec(0, &mx28_fec_pdata);
-
-	mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
-
-	gpio_led_register_device(0, &apx4devkit_led_data);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
-
-	apx4devkit_add_regulators();
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
-			ARRAY_SIZE(apx4devkit_i2c_boardinfo));
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
-}
-
-static void __init apx4devkit_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer apx4devkit_timer = {
-	.init	= apx4devkit_timer_init,
-};
-
-MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &apx4devkit_timer,
-	.init_machine	= apx4devkit_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-m28evk.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-m28evk.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-m28evk.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-m28evk.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define M28EVK_GPIO_USERLED1	MXS_GPIO_NR(3, 16)
-#define M28EVK_GPIO_USERLED2	MXS_GPIO_NR(3, 17)
-
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define M28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 28)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-
-static const iomux_cfg_t m28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-
-	MX28_PAD_LCD_ENABLE__LCD_ENABLE	| MXS_PAD_CTRL,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
-
-	/* nand */
-	MX28_PAD_GPMI_D00__GPMI_D0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D01__GPMI_D1 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D02__GPMI_D2 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D03__GPMI_D3 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D04__GPMI_D4 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D05__GPMI_D5 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D06__GPMI_D6 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D07__GPMI_D7 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_CE0N__GPMI_CE0N |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDY0__GPMI_READY0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDN__GPMI_RDN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_WRN__GPMI_WRN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_ALE__GPMI_ALE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_CLE__GPMI_CLE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RESETN__GPMI_RESETN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-
-	/* Backlight */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-};
-
-/* led */
-static const struct gpio_led m28evk_leds[] __initconst = {
-	{
-		.name = "user-led1",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED1,
-	},
-	{
-		.name = "user-led2",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED2,
-	},
-};
-
-static const struct gpio_led_platform_data m28evk_led_data __initconst = {
-	.leds = m28evk_leds,
-	.num_leds = ARRAY_SIZE(m28evk_leds),
-};
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init m28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code DENX OUI (C0:E5:4E) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0xC0;
-		mx28_fec_pdata[i].mac[1] = 0xE5;
-		mx28_fec_pdata[i].mac[2] = 0x4E;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/* mxsfb (lcdif) */
-static struct fb_videomode m28evk_video_modes[] = {
-	{
-		.name		= "Ampire AM-800480R2TMQW-T01H",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 30066, /* picosecond (33.26 MHz) */
-		.left_margin	= 0,
-		.right_margin	= 256,
-		.upper_margin	= 0,
-		.lower_margin	= 45,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
-	.mode_list	= m28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(m28evk_video_modes),
-	.default_bpp	= 16,
-	.ld_intf_width	= STMLCDIF_18BIT,
-};
-
-static struct at24_platform_data m28evk_eeprom = {
-	.byte_len = 16384,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("at24", 0x51),	/* E0=1, E1=0, E2=0 */
-		.platform_data = &m28evk_eeprom,
-	},
-};
-
-static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static void __init m28evk_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (!m28evk_fec_get_mac()) {
-		mx28_add_fec(0, &mx28_fec_pdata[0]);
-		mx28_add_fec(1, &mx28_fec_pdata[1]);
-	}
-
-	mx28_add_flexcan(0, NULL);
-	mx28_add_flexcan(1, NULL);
-
-	mx28_add_mxsfb(&m28evk_mxsfb_pdata);
-
-	mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
-
-	gpio_led_register_device(0, &m28evk_led_data);
-
-	/* I2C */
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
-}
-
-static void __init m28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer m28evk_timer = {
-	.init	= m28evk_timer_init,
-};
-
-MACHINE_START(M28EVK, "DENX M28 EVK")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &m28evk_timer,
-	.init_machine	= m28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-mx23evk.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-mx23evk.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-mx23evk.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-mx23evk.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,190 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
-#define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
-#define MX23EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define MX23EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-static const iomux_cfg_t mx23evk_pads[] __initconst = {
-	/* duart */
-	MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
-
-	/* mxsfb (lcdif) */
-	MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
-	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D08__SSP1_DATA4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D09__SSP1_DATA5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D10__SSP1_DATA6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D11__SSP1_DATA7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX23_PAD_PWM4__GPIO_1_30 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX23_PAD_PWM3__GPIO_1_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx23evk_video_modes[] = {
-	{
-		.name		= "Samsung-LMS430HF02",
-		.refresh	= 60,
-		.xres		= 480,
-		.yres		= 272,
-		.pixclock	= 108096, /* picosecond (9.2 MHz) */
-		.left_margin	= 15,
-		.right_margin	= 8,
-		.upper_margin	= 12,
-		.lower_margin	= 4,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx23evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx23evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
-	.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
-	.flags = SLOTF_8_BIT_CAPABLE,
-};
-
-static void __init mx23evk_init(void)
-{
-	int ret;
-
-	mx23_soc_init();
-
-	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-
-	/* power on mmc slot by writing 0 to the gpio */
-	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
-			       "mmc0-slot-power");
-	if (ret)
-		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
-
-	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
-	if (ret)
-		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_LCD_ENABLE, 1);
-
-	ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
-	if (ret)
-		pr_warn("failed to request gpio bl-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_BL_ENABLE, 1);
-
-	mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
-	mx23_add_rtc_stmp3xxx();
-}
-
-static void __init mx23evk_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer mx23evk_timer = {
-	.init	= mx23evk_timer_init,
-};
-
-MACHINE_START(MX23EVK, "Freescale MX23 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &mx23evk_timer,
-	.init_machine	= mx23evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-mx28evk.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-mx28evk.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-mx28evk.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-mx28evk.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,477 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include <mach/digctl.h>
-
-#include "devices-mx28.h"
-
-#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
-#define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)
-#define MX28EVK_GPIO_LED	MXS_GPIO_NR(3, 5)
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
-#define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-#define MX28EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC1_SLOT_POWER		MXS_GPIO_NR(3, 29)
-
-static const iomux_cfg_t mx28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-	/* phy power line */
-	MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
-	/* phy reset line */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-	/* transceiver power control */
-	MX28_PAD_SSP1_CMD__GPIO_2_13,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
-	MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_SSP1_SCK__GPIO_2_12 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM3__GPIO_3_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_I2C0_SDA__I2C0_SDA |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led mx28evk_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = MX28EVK_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
-	.leds = mx28evk_leds,
-	.num_leds = ARRAY_SIZE(mx28evk_leds),
-};
-
-/* fec */
-static void __init mx28evk_fec_reset(void)
-{
-	struct clk *clk;
-
-	/* Enable fec phy clock */
-	clk = clk_get_sys("enet_out", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
-	mdelay(1);
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
-}
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init mx28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code Freescale OUI (00:04:9f) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0x00;
-		mx28_fec_pdata[i].mac[1] = 0x04;
-		mx28_fec_pdata[i].mac[2] = 0x9f;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-static int flexcan0_en, flexcan1_en;
-
-static void mx28evk_flexcan_switch(void)
-{
-	if (flexcan0_en || flexcan1_en)
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
-	else
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-
-static void mx28evk_flexcan0_switch(int enable)
-{
-	flexcan0_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static void mx28evk_flexcan1_switch(int enable)
-{
-	flexcan1_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static const struct flexcan_platform_data
-		mx28evk_flexcan_pdata[] __initconst = {
-	{
-		.transceiver_switch = mx28evk_flexcan0_switch,
-	}, {
-		.transceiver_switch = mx28evk_flexcan1_switch,
-	}
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx28evk_video_modes[] = {
-	{
-		.name		= "Seiko-43WVF1G",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 29851, /* picosecond (33.5 MHz) */
-		.left_margin	= 89,
-		.right_margin	= 164,
-		.upper_margin	= 23,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx28evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("sgtl5000", 0x0a),
-	},
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data mx28evk_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = mx28evk_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config mx28evk_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &mx28evk_vdd_reg_init_data,
-};
-static struct platform_device mx28evk_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mx28evk_vdd_pdata,
-	},
-};
-static void __init mx28evk_add_regulators(void)
-{
-	platform_device_register(&mx28evk_voltage_regulator);
-}
-#else
-static void __init mx28evk_add_regulators(void) {}
-#endif
-
-static const struct gpio mx28evk_gpios[] __initconst = {
-	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
-	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
-	{ MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
-	{ MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
-	{ MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
-	{ MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
-};
-
-static const struct mxs_saif_platform_data
-			mx28evk_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static void __init mx28evk_init(void)
-{
-	int ret;
-
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (mx28evk_fec_get_mac())
-		pr_warn("%s: failed on fec mac setup\n", __func__);
-
-	ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
-	if (ret)
-		pr_err("One or more GPIOs failed to be requested: %d\n", ret);
-
-	mx28evk_fec_reset();
-	mx28_add_fec(0, &mx28_fec_pdata[0]);
-	mx28_add_fec(1, &mx28_fec_pdata[1]);
-
-	mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
-	mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-
-	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, mxs_i2c0_board_info,
-				ARRAY_SIZE(mxs_i2c0_board_info));
-
-	mx28evk_add_regulators();
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
-			NULL, 0);
-
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
-
-	mx28_add_rtc_stmp3xxx();
-
-	gpio_led_register_device(0, &mx28evk_led_data);
-}
-
-static void __init mx28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer mx28evk_timer = {
-	.init	= mx28evk_timer_init,
-};
-
-MACHINE_START(MX28EVK, "Freescale MX28 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &mx28evk_timer,
-	.init_machine	= mx28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-mxs.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-mxs.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-mxs.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-mxs.c	2012-12-10 22:30:57.000000000 -0500
@@ -12,18 +12,21 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/can/platform/flexcan.h>
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/init.h>
-#include <linux/irqdomain.h>
 #include <linux/micrel_phy.h>
 #include <linux/mxsfb.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
+#include <linux/pinctrl/consumer.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/mxs.h>
 
 static struct fb_videomode mx23evk_video_modes[] = {
 	{
@@ -99,43 +102,43 @@
 
 static struct mxsfb_platform_data mxsfb_pdata __initdata;
 
-static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
-	OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
-	{ /* sentinel */ }
-};
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
 
-static int __init mxs_icoll_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
+static int flexcan0_en, flexcan1_en;
 
-	return 0;
+static void mx28evk_flexcan_switch(void)
+{
+	if (flexcan0_en || flexcan1_en)
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+	else
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
 }
 
-static int __init mxs_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
+static void mx28evk_flexcan0_switch(int enable)
 {
-	static int gpio_irq_base = MXS_GPIO_IRQ_START;
-
-	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-	gpio_irq_base += 32;
+	flexcan0_en = enable;
+	mx28evk_flexcan_switch();
+}
 
-	return 0;
+static void mx28evk_flexcan1_switch(int enable)
+{
+	flexcan1_en = enable;
+	mx28evk_flexcan_switch();
 }
 
-static const struct of_device_id mxs_irq_match[] __initconst = {
-	{ .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, },
-	{ .compatible = "fsl,mxs-gpio", .data = mxs_gpio_add_irq_domain, },
+static struct flexcan_platform_data flexcan_pdata[2];
+
+static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+	OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
 	{ /* sentinel */ }
 };
 
-static void __init mxs_dt_init_irq(void)
-{
-	icoll_init_irq();
-	of_irq_init(mxs_irq_match);
-}
-
 static void __init imx23_timer_init(void)
 {
 	mx23_clocks_init();
@@ -237,13 +240,21 @@
 	mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+
+	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
 
-static void __init m28evk_init(void)
+static void __init imx28_evk_post_init(void)
 {
-	enable_clk_enet_out();
-	update_fec_mac_prop(OUI_DENX);
+	if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
+			      "flexcan-switch")) {
+		flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
+		flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
+	}
+}
 
+static void __init m28evk_init(void)
+{
 	mxsfb_pdata.mode_list = m28evk_video_modes;
 	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
 	mxsfb_pdata.default_bpp = 16;
@@ -270,6 +281,80 @@
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
 }
 
+#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
+#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
+#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
+#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
+#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
+#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
+#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
+#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
+#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
+
+#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
+#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
+
+static const struct gpio tx28_gpios[] __initconst = {
+	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
+	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
+	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
+	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
+	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
+	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
+	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
+	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
+	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
+	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
+	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
+};
+
+static void __init tx28_post_init(void)
+{
+	struct device_node *np;
+	struct platform_device *pdev;
+	struct pinctrl *pctl;
+	int ret;
+
+	enable_clk_enet_out();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		pr_err("%s: failed to find fec device\n", __func__);
+		return;
+	}
+
+	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
+	if (IS_ERR(pctl)) {
+		pr_err("%s: failed to get pinctrl state\n", __func__);
+		return;
+	}
+
+	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
+	if (ret) {
+		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
+		return;
+	}
+
+	/* Power up fec phy */
+	gpio_set_value(TX28_FEC_PHY_POWER, 1);
+	msleep(26); /* 25ms according to data sheet */
+
+	/* Mode strap pins */
+	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
+	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
+	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
+
+	udelay(100); /* minimum assertion time for nRST */
+
+	/* Deasserting FEC PHY RESET */
+	gpio_set_value(TX28_FEC_PHY_RESET, 1);
+
+	pinctrl_put(pctl);
+}
+
 static void __init mxs_machine_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx28-evk"))
@@ -283,29 +368,28 @@
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     mxs_auxdata_lookup, NULL);
+
+	if (of_machine_is_compatible("karo,tx28"))
+		tx28_post_init();
+
+	if (of_machine_is_compatible("fsl,imx28-evk"))
+		imx28_evk_post_init();
 }
 
 static const char *imx23_dt_compat[] __initdata = {
-	"fsl,imx23-evk",
-	"fsl,stmp378x_devb"
-	"olimex,imx23-olinuxino",
 	"fsl,imx23",
 	NULL,
 };
 
 static const char *imx28_dt_compat[] __initdata = {
-	"bluegiga,apx4devkit",
-	"crystalfontz,cfa10036",
-	"denx,m28evk",
-	"fsl,imx28-evk",
-	"karo,tx28",
 	"fsl,imx28",
 	NULL,
 };
 
 DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
 	.map_io		= mx23_map_io,
-	.init_irq	= mxs_dt_init_irq,
+	.init_irq	= icoll_init_irq,
+	.handle_irq	= icoll_handle_irq,
 	.timer		= &imx23_timer,
 	.init_machine	= mxs_machine_init,
 	.dt_compat	= imx23_dt_compat,
@@ -314,7 +398,8 @@
 
 DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
 	.map_io		= mx28_map_io,
-	.init_irq	= mxs_dt_init_irq,
+	.init_irq	= icoll_init_irq,
+	.handle_irq	= icoll_handle_irq,
 	.timer		= &imx28_timer,
 	.init_machine	= mxs_machine_init,
 	.dt_compat	= imx28_dt_compat,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-stmp378x_devb.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-stmp378x_devb.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-stmp378x_devb.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-stmp378x_devb.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,123 +0,0 @@
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
-	/* duart (extended setup missing in old boardcode, too */
-	MX23_PAD_PWM0__DUART_RX,
-	MX23_PAD_PWM1__DUART_TX,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
-	MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
-	.wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-	{
-		.modalias       = "enc28j60",
-		.max_speed_hz   = 6 * 1000 * 1000,
-		.bus_num	= 1,
-		.chip_select    = 0,
-		.platform_data  = NULL,
-	},
-#endif
-};
-
-static void __init stmp378x_dvb_init(void)
-{
-	int ret;
-
-	mx23_soc_init();
-
-	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
-			ARRAY_SIZE(stmp378x_dvb_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-	mx23_add_rtc_stmp3xxx();
-
-	/* power on mmc slot */
-	ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
-		GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
-	if (ret)
-		pr_warn("could not power mmc (%d)\n", ret);
-
-	mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init stmp378x_dvb_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer stmp378x_dvb_timer = {
-	.init	= stmp378x_dvb_timer_init,
-};
-
-MACHINE_START(STMP378X, "STMP378X")
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &stmp378x_dvb_timer,
-	.init_machine	= stmp378x_dvb_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-tx28.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-tx28.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mach-tx28.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mach-tx28.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- */
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-#include "module-tx28.h"
-
-#define TX28_STK5_GPIO_LED		MXS_GPIO_NR(4, 10)
-
-static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
-	/* LED */
-	MX28_PAD_ENET0_RXD3__GPIO_4_10 |
-		MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
-
-	/* framebuffer */
-#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
-	MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
-	MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
-	MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
-	MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
-	MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
-	MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
-	MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
-	MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
-	MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
-	MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
-	MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
-	MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
-	MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
-	MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
-	MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
-	MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
-	MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
-	MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
-	MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
-	MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
-	MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
-	MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
-	MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
-	MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
-	MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
-	MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
-	MX28_PAD_PWM0__PWM_0 | LCD_MODE,
-
-	/* UART1 */
-	MX28_PAD_AUART0_CTS__DUART_RX,
-	MX28_PAD_AUART0_RTS__DUART_TX,
-	MX28_PAD_AUART0_TX__DUART_RTS,
-	MX28_PAD_AUART0_RX__DUART_CTS,
-
-	/* UART2 */
-	MX28_PAD_AUART1_RX__AUART1_RX,
-	MX28_PAD_AUART1_TX__AUART1_TX,
-	MX28_PAD_AUART1_RTS__AUART1_RTS,
-	MX28_PAD_AUART1_CTS__AUART1_CTS,
-
-	/* CAN */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* TSC2007 */
-	MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
-
-	/* MMC0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = TX28_STK5_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
-	.leds = tx28_stk5v3_leds,
-	.num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
-};
-
-static struct spi_board_info tx28_spi_board_info[] = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
-       .wp_gpio = -EINVAL,
-       .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static void __init tx28_stk5v3_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
-			ARRAY_SIZE(tx28_stk5v3_pads));
-
-	mx28_add_duart(); /* UART1 */
-	mx28_add_auart(1); /* UART2 */
-
-	tx28_add_fec0();
-	/* spi via ssp will be added when available */
-	spi_register_board_info(tx28_spi_board_info,
-			ARRAY_SIZE(tx28_spi_board_info));
-	gpio_led_register_device(0, &tx28_stk5v3_led_data);
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
-	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
-	mx28_add_rtc_stmp3xxx();
-}
-
-static void __init tx28_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer tx28_timer = {
-	.init = tx28_timer_init,
-};
-
-MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
-	.map_io = mx28_map_io,
-	.init_irq = mx28_init_irq,
-	.timer = &tx28_timer,
-	.init_machine = tx28_stk5v3_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/Makefile linux-libre-3.7-gnu/arch/arm/mach-mxs/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -1,15 +1,6 @@
 # Common support
-obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
+obj-y := icoll.o ocotp.o system.o timer.o mm.o
 
 obj-$(CONFIG_PM) += pm.o
 
 obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
-obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
-obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
-obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
-obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
-obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
-obj-$(CONFIG_MODULE_TX28) += module-tx28.o
-obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
-
-obj-y += devices/
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/Makefile.boot linux-libre-3.7-gnu/arch/arm/mach-mxs/Makefile.boot
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/Makefile.boot	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/Makefile.boot	2012-12-10 22:30:57.000000000 -0500
@@ -1,10 +1 @@
 zreladdr-y += 0x40008000
-
-dtb-y += imx23-evk.dtb \
-	 imx23-olinuxino.dtb \
-	 imx23-stmp378x_devb.dtb \
-	 imx28-apx4devkit.dtb \
-	 imx28-cfa10036.dtb \
-	 imx28-evk.dtb \
-	 imx28-m28evk.dtb \
-	 imx28-tx28.dtb \
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/mm.c linux-libre-3.7-gnu/arch/arm/mach-mxs/mm.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/mm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/mm.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,14 +13,11 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/pinctrl/machine.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/mx23.h>
 #include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
 
 /*
  * Define the MX23 memory map.
@@ -48,43 +45,7 @@
 	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
 }
 
-void __init mx23_init_irq(void)
-{
-	icoll_init_irq();
-}
-
 void __init mx28_map_io(void)
 {
 	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
 }
-
-void __init mx28_init_irq(void)
-{
-	icoll_init_irq();
-}
-
-void __init mx23_soc_init(void)
-{
-	pinctrl_provide_dummies();
-
-	mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
-	mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
-	mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
-	mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
-	mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
-}
-
-void __init mx28_soc_init(void)
-{
-	pinctrl_provide_dummies();
-
-	mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
-	mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
-	mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
-	mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
-	mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
-	mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
-	mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/module-tx28.c linux-libre-3.7-gnu/arch/arm/mach-mxs/module-tx28.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/module-tx28.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/module-tx28.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/fec.h>
-#include <linux/gpio.h>
-
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-
-#include "module-tx28.h"
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
-	/* PHY POWER */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* PHY RESET */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* Mode strap pins 0-2 */
-	MX28_PAD_ENET0_RXD0__GPIO_4_3 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RXD1__GPIO_4_4 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	/* nINT */
-	MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-
-	MX28_PAD_ENET0_MDC__GPIO_4_0,
-	MX28_PAD_ENET0_MDIO__GPIO_4_1,
-	MX28_PAD_ENET0_TX_EN__GPIO_4_6,
-	MX28_PAD_ENET0_TXD0__GPIO_4_7,
-	MX28_PAD_ENET0_TXD1__GPIO_4_8,
-	MX28_PAD_ENET_CLK__GPIO_4_16,
-};
-
-#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
-	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
-};
-
-static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN,
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
-};
-
-static const struct fec_platform_data tx28_fec0_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct fec_platform_data tx28_fec1_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-int __init tx28_add_fec0(void)
-{
-	int i, ret;
-
-	pr_debug("%s: Switching FEC PHY power off\n", __func__);
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
-			ARRAY_SIZE(tx28_fec_gpio_pads));
-	for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		ret = gpio_request(gpio, "FEC");
-		if (ret) {
-			pr_err("Failed to request GPIO_%d_%d: %d\n",
-				PAD_BANK(tx28_fec_gpio_pads[i]),
-				PAD_PIN(tx28_fec_gpio_pads[i]), ret);
-			goto free_gpios;
-		}
-		ret = gpio_direction_output(gpio, 0);
-		if (ret) {
-			pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
-					gpio / 32 + 1, gpio % 32, ret);
-			goto free_gpios;
-		}
-	}
-
-	/* Power up fec phy */
-	pr_debug("%s: Switching FEC PHY power on\n", __func__);
-	ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
-	if (ret) {
-		pr_err("Failed to power on PHY: %d\n", ret);
-		goto free_gpios;
-	}
-	mdelay(26); /* 25ms according to data sheet */
-
-	/* nINT */
-	gpio_direction_input(MXS_GPIO_NR(4, 5));
-	/* Mode strap pins */
-	gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
-			ARRAY_SIZE(tx28_fec0_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		goto free_gpios;
-	}
-	pr_debug("%s: Registering FEC0 device\n", __func__);
-	mx28_add_fec(0, &tx28_fec0_data);
-	return 0;
-
-free_gpios:
-	while (--i >= 0) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		gpio_free(gpio);
-	}
-
-	return ret;
-}
-
-int __init tx28_add_fec1(void)
-{
-	int ret;
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
-			ARRAY_SIZE(tx28_fec1_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		return ret;
-	}
-	pr_debug("%s: Registering FEC1 device\n", __func__);
-	mx28_add_fec(1, &tx28_fec1_data);
-	return 0;
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/module-tx28.h linux-libre-3.7-gnu/arch/arm/mach-mxs/module-tx28.h
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/module-tx28.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/module-tx28.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- *   Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-int __init tx28_add_fec0(void);
-int __init tx28_add_fec1(void);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-mxs/timer.c linux-libre-3.7-gnu/arch/arm/mach-mxs/timer.c
--- linux-libre-3.6-gnu/arch/arm/mach-mxs/timer.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-mxs/timer.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,6 +25,8 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
 #include <mach/mxs.h>
@@ -244,9 +246,17 @@
 	return 0;
 }
 
-void __init mxs_timer_init(int irq)
+void __init mxs_timer_init(void)
 {
+	struct device_node *np;
 	struct clk *timer_clk;
+	int irq;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,timrot");
+	if (!np) {
+		pr_err("%s: failed find timrot node\n", __func__);
+		return;
+	}
 
 	timer_clk = clk_get_sys("timrot", NULL);
 	if (IS_ERR(timer_clk)) {
@@ -295,5 +305,6 @@
 	mxs_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
+	irq = irq_of_parse_and_map(np, 0);
 	setup_irq(irq, &mxs_timer_irq);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-netx/include/mach/eth.h linux-libre-3.7-gnu/arch/arm/mach-netx/include/mach/eth.h
--- linux-libre-3.6-gnu/arch/arm/mach-netx/include/mach/eth.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-netx/include/mach/eth.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
-
-struct netxeth_platform_data {
-	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
-};
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-netx/nxdb500.c linux-libre-3.7-gnu/arch/arm/mach-netx/nxdb500.c
--- linux-libre-3.6-gnu/arch/arm/mach-netx/nxdb500.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-netx/nxdb500.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 #include "fb.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-netx/nxdkn.c linux-libre-3.7-gnu/arch/arm/mach-netx/nxdkn.c
--- linux-libre-3.6-gnu/arch/arm/mach-netx/nxdkn.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-netx/nxdkn.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-netx/nxeb500hmi.c linux-libre-3.7-gnu/arch/arm/mach-netx/nxeb500hmi.c
--- linux-libre-3.6-gnu/arch/arm/mach-netx/nxeb500hmi.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-netx/nxeb500hmi.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 #include "fb.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-nomadik/board-nhk8815.c linux-libre-3.7-gnu/arch/arm/mach-nomadik/board-nhk8815.c
--- linux-libre-3.6-gnu/arch/arm/mach-nomadik/board-nhk8815.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-nomadik/board-nhk8815.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,6 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
@@ -33,8 +34,9 @@
 
 #include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
+#include <plat/pincfg.h>
 
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <mach/fsmc.h>
 
 #include "cpu-8815.h"
@@ -112,8 +114,7 @@
 static struct nomadik_nand_platform_data nhk8815_nand_data = {
 	.parts		= nhk8815_partitions,
 	.nparts		= ARRAY_SIZE(nhk8815_partitions),
-	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
-			| NAND_NO_READRDY,
+	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING,
 	.init		= nhk8815_nand_init,
 };
 
@@ -291,8 +292,42 @@
 	},
 };
 
+static unsigned long out_low[] = { PIN_OUTPUT_LOW };
+static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
+static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
+static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
+
+static struct pinctrl_map __initdata nhk8815_pinmap[] = {
+	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
+	/* Hog in MMC/SD card mux */
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
+	/* MCCLK */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
+	/* MCCMD */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
+	/* MCCMDDIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
+	/* MCDAT3-0 */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
+	/* MCDAT0DIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
+	/* MCDAT31DIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
+	/* MCMSFBCLK */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
+	/* CD input GPIO */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
+	/* CD bias drive */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
+};
+
 static void __init nhk8815_platform_init(void)
 {
+	pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
 	cpu8815_platform_init();
 	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-nomadik/cpu-8815.c linux-libre-3.7-gnu/arch/arm/mach-nomadik/cpu-8815.c
--- linux-libre-3.6-gnu/arch/arm/mach-nomadik/cpu-8815.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-nomadik/cpu-8815.c	2012-12-10 22:30:57.000000000 -0500
@@ -83,6 +83,18 @@
 	}
 }
 
+static inline void
+cpu8815_add_pinctrl(struct device *parent, const char *name)
+{
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = name,
+		.id = -1,
+	};
+
+	platform_device_register_full(&pdevinfo);
+}
+
 static int __init cpu8815_init(void)
 {
 	struct nmk_gpio_platform_data pdata = {
@@ -91,6 +103,7 @@
 
 	cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
 			  IRQ_GPIO0, &pdata);
+	cpu8815_add_pinctrl(NULL, "pinctrl-stn8815");
 	amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
 	amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
 	return 0;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,4 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#endif /* __ASM_ARCH_GPIO_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/hardware.h linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/hardware.h
--- linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/hardware.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/hardware.h	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
 
 /* used in asm code, so no casts */
-#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
 
 /*
  *   Base address defination for Nomadik Onchip Logic Block
diff -druN linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/nand.h linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/nand.h
--- linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/nand.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/nand.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
-	struct mtd_partition *parts;
-	int nparts;
-	int options;
-	int (*init) (void);
-	int (*exit) (void);
-};
-
-#define NAND_IO_DATA	0x40000000
-#define NAND_IO_CMD	0x40800000
-#define NAND_IO_ADDR	0x41000000
-
-#endif				/* __ASM_ARCH_NAND_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/uncompress.h linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/uncompress.h
--- linux-libre-3.6-gnu/arch/arm/mach-nomadik/include/mach/uncompress.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-nomadik/include/mach/uncompress.h	2012-12-10 22:30:57.000000000 -0500
@@ -27,10 +27,10 @@
 struct amba_device;
 #include <linux/amba/serial.h>
 
-#define NOMADIK_UART_DR		0x101FB000
-#define NOMADIK_UART_LCRH	0x101FB02c
-#define NOMADIK_UART_CR		0x101FB030
-#define NOMADIK_UART_FR		0x101FB018
+#define NOMADIK_UART_DR		(void __iomem *)0x101FB000
+#define NOMADIK_UART_LCRH	(void __iomem *)0x101FB02c
+#define NOMADIK_UART_CR		(void __iomem *)0x101FB030
+#define NOMADIK_UART_FR		(void __iomem *)0x101FB018
 
 static void putc(const char c)
 {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-nomadik/Kconfig linux-libre-3.7-gnu/arch/arm/mach-nomadik/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-nomadik/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-nomadik/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -4,8 +4,8 @@
 
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
-	select NOMADIK_8815
 	select HAS_MTU
+	select NOMADIK_8815
 
 endmenu
 
@@ -16,7 +16,7 @@
 	tristate "Driver for bit-bang busses found on the 8815 NHK"
 	depends on I2C && MACH_NOMADIK_8815NHK
 	depends on PINCTRL_NOMADIK
-	select I2C_ALGOBIT
 	default y
+	select I2C_ALGOBIT
 
 endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/ams-delta-fiq.c linux-libre-3.7-gnu/arch/arm/mach-omap1/ams-delta-fiq.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/ams-delta-fiq.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/ams-delta-fiq.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
 
 #include <asm/fiq.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S linux-libre-3.7-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S	2012-12-10 22:30:57.000000000 -0500
@@ -16,8 +16,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
 
+#include <mach/irqs.h>
 #include <mach/ams-delta-fiq.h>
 
 #include "iomap.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-ams-delta.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-ams-delta.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-ams-delta.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-ams-delta.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,6 +26,7 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <media/soc_camera.h>
 
@@ -34,10 +35,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board-ams-delta.h>
-#include <plat/keypad.h>
-#include <plat/mux.h>
-#include <plat/board.h>
+#include <mach/board-ams-delta.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/mux.h>
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
@@ -444,16 +444,28 @@
 	.lclk_khz_max	= 1334,		/* results in 5fps CIF, 10fps QCIF */
 };
 
+static struct platform_device ams_delta_audio_device = {
+	.name   = "ams-delta-audio",
+	.id     = -1,
+};
+
+static struct platform_device cx20442_codec_device = {
+	.name   = "cx20442-codec",
+	.id     = -1,
+};
+
 static struct platform_device *ams_delta_devices[] __initdata = {
 	&latch1_gpio_device,
 	&latch2_gpio_device,
 	&ams_delta_kp_device,
 	&ams_delta_camera_device,
+	&ams_delta_audio_device,
 };
 
 static struct platform_device *late_devices[] __initdata = {
 	&ams_delta_nand_device,
 	&ams_delta_lcd_device,
+	&cx20442_codec_device,
 };
 
 static void __init ams_delta_init(void)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-fsample.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-fsample.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-fsample.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-fsample.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,11 +28,10 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
 #include <plat/fpga.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-generic.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-generic.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-generic.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-generic.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,8 +22,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
-#include <plat/board.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 
@@ -52,9 +51,6 @@
 };
 #endif
 
-static struct omap_board_config_kernel generic_config[] __initdata = {
-};
-
 static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -76,8 +72,6 @@
 	}
 #endif
 
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-h2.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-h2.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-h2.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-h2.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,17 +31,19 @@
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
-#include <plat/flash.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -306,12 +308,39 @@
 	.resource	= h2_irda_resources,
 };
 
+static struct gpio_led h2_gpio_led_pins[] = {
+	{
+		.name		= "h2:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h2:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+	.leds		= h2_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h2_gpio_led_data,
+	},
+};
+
 static struct platform_device *h2_devices[] __initdata = {
 	&h2_nor_device,
 	&h2_nand_device,
 	&h2_smc91x_device,
 	&h2_irda_device,
 	&h2_kp_device,
+	&h2_gpio_leds,
 };
 
 static void __init h2_init_smc91x(void)
@@ -406,6 +435,10 @@
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	h2_smc91x_resources[1].start = gpio_to_irq(0);
 	h2_smc91x_resources[1].end = gpio_to_irq(0);
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-h3.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-h3.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-h3.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-h3.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,6 +31,8 @@
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -38,11 +40,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <plat/dma.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -324,6 +326,32 @@
 	},
 };
 
+static struct gpio_led h3_gpio_led_pins[] = {
+	{
+		.name		= "h3:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h3:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+	.leds		= h3_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3_gpio_led_data,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&nor_device,
 	&nand_device,
@@ -331,6 +359,7 @@
 	&intlat_device,
 	&h3_kp_device,
 	&h3_lcd_device,
+	&h3_gpio_leds,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -398,6 +427,10 @@
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	smc91x_resources[1].start = gpio_to_irq(40);
 	smc91x_resources[1].end = gpio_to_irq(40);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-htcherald.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-htcherald.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-htcherald.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-htcherald.c	2012-12-10 22:30:57.000000000 -0500
@@ -37,13 +37,12 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/omap7xx.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
+#include <mach/omap7xx.h>
 #include <plat/mmc.h>
 
 #include <mach/irqs.h>
@@ -476,8 +475,7 @@
 				break;
 		}
 		if (!tries)
-			printk(KERN_WARNING "Timeout waiting for end of frame "
-			       "-- LCD may not be available\n");
+			pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
 
 		/* turn off DMA */
 		reg = omap_readw(OMAP_DMA_LCD_CCR);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-innovator.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-innovator.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-innovator.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-innovator.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,11 +31,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
 #include <plat/fpga.h>
 #include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <plat/mmc.h>
 
 #include <mach/hardware.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-nokia770.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-nokia770.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-nokia770.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-nokia770.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,14 +21,14 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/platform_data/lcd-mipid.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/lcd_mipid.h>
+#include <mach/mux.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-osk.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-osk.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-osk.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-osk.c	2012-12-10 22:30:57.000000000 -0500
@@ -39,13 +39,15 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>
@@ -302,7 +304,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
 
 static struct at24_platform_data at24c04 = {
 	.byte_len	= SZ_4K / 8,
@@ -380,10 +382,37 @@
 	.id		= -1,
 };
 
+static struct gpio_led mistral_gpio_led_pins[] = {
+	{
+		.name		= "mistral:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "mistral:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+	.leds		= mistral_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mistral_gpio_led_data,
+	},
+};
+
 static struct platform_device *mistral_devices[] __initdata = {
 	&osk5912_kp_device,
 	&mistral_bl_device,
 	&osk5912_lcd_device,
+	&mistral_gpio_leds,
 };
 
 static int mistral_get_pendown_state(void)
@@ -508,6 +537,12 @@
 	if (gpio_request(2, "lcd_pwr") == 0)
 		gpio_direction_output(2, 1);
 
+	/*
+	 * GPIO based LEDs
+	 */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	i2c_register_board_info(1, mistral_i2c_board_info,
 			ARRAY_SIZE(mistral_i2c_board_info));
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-palmte.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-palmte.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-palmte.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-palmte.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,18 +28,18 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-palmtt.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-palmtt.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-palmtt.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-palmtt.c	2012-12-10 22:30:57.000000000 -0500
@@ -27,19 +27,19 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/led.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-palmz71.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-palmz71.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-palmz71.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-palmz71.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,18 +30,18 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-perseus2.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-perseus2.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-perseus2.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-perseus2.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,17 +22,16 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
-#include <plat/flash.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-sx1.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-sx1.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-sx1.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-sx1.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,19 +28,18 @@
 #include <linux/errno.h>
 #include <linux/export.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
-#include <plat/irda.h>
+#include <mach/irda.h>
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-sx1-mmc.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-sx1-mmc.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-sx1-mmc.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-sx1-mmc.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 #include <plat/mmc.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/board-voiceblue.c linux-libre-3.7-gnu/arch/arm/mach-omap1/board-voiceblue.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/board-voiceblue.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/board-voiceblue.c	2012-12-10 22:30:57.000000000 -0500
@@ -31,11 +31,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board-voiceblue.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/board-voiceblue.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -155,9 +154,6 @@
 	.pins[2]	= 6,
 };
 
-static struct omap_board_config_kernel voiceblue_config[] = {
-};
-
 #define MACHINE_PANICED		1
 #define MACHINE_REBOOTING	2
 #define MACHINE_REBOOT		4
@@ -275,8 +271,6 @@
 	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
 	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_board_config = voiceblue_config;
-	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
 	omap1_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/clock.c linux-libre-3.7-gnu/arch/arm/mach-omap1/clock.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/clock.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/clock.c	2012-12-10 22:30:57.000000000 -0500
@@ -587,8 +587,8 @@
 	/* Clocks in the DSP domain need api_ck. Just assume bootloader
 	 * has not enabled any DSP clocks */
 	if (clk->enable_reg == DSP_IDLECT2) {
-		printk(KERN_INFO "Skipping reset check for DSP domain "
-		       "clock \"%s\"\n", clk->name);
+		pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
+			clk->name);
 		return;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/clock_data.c linux-libre-3.7-gnu/arch/arm/mach-omap1/clock_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/clock_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/clock_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,7 +25,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/clkdev_omap.h>
-#include <plat/board.h>
 #include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
 
 #include <mach/hardware.h>
@@ -776,11 +775,10 @@
 
 static void __init omap1_show_rates(void)
 {
-	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
-			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		  ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		  ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		  arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 }
 
 u32 cpu_mask;
@@ -788,7 +786,6 @@
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
-	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
 	u32 reg;
 
@@ -837,19 +834,13 @@
 	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
 	ck_ref_p = clk_get(NULL, "ck_ref");
 
-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap15xx())
-			crystal_type = info->system_clock_type;
-	}
-
 	if (cpu_is_omap7xx())
 		ck_ref.rate = 13000000;
 	if (cpu_is_omap16xx() && crystal_type == 2)
 		ck_ref.rate = 19200000;
 
-	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
-		"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
 		omap_readw(ARM_CKCTL));
 
 	/* We want to be in syncronous scalable mode */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/devices.c linux-libre-3.7-gnu/arch/arm/mach-omap1/devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,12 +20,11 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/mmc.h>
-#include <plat/omap7xx.h>
 
+#include <mach/omap7xx.h>
 #include <mach/camera.h>
 #include <mach/hardware.h>
 
@@ -232,7 +231,7 @@
 
 		omap_mmc_add("mmci-omap", i, base, size, irq,
 				rx_req, tx_req, mmc_data[i]);
-	};
+	}
 }
 
 #endif
@@ -358,6 +357,33 @@
 #endif
 
 
+#define OMAP1_RNG_BASE		0xfffe5000
+
+static struct resource omap1_rng_resources[] = {
+	{
+		.start		= OMAP1_RNG_BASE,
+		.end		= OMAP1_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap1_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap1_rng_resources),
+	.resource	= omap1_rng_resources,
+};
+
+static void omap1_init_rng(void)
+{
+	if (!cpu_is_omap16xx())
+		return;
+
+	(void) platform_device_register(&omap1_rng_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -396,6 +422,7 @@
 	omap_init_spi100k();
 	omap_init_sti();
 	omap_init_uwire();
+	omap1_init_rng();
 
 	return 0;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/dma.c linux-libre-3.7-gnu/arch/arm/mach-omap1/dma.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/dma.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/dma.c	2012-12-10 22:30:57.000000000 -0500
@@ -27,7 +27,8 @@
 
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/irqs.h>
+
+#include <mach/irqs.h>
 
 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17
@@ -330,8 +331,9 @@
 	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
 					(d->lch_count), GFP_KERNEL);
 	if (!d->chan) {
-		dev_err(&pdev->dev, "%s: Memory allocation failed"
-					"for d->chan!!!\n", __func__);
+		dev_err(&pdev->dev,
+			"%s: Memory allocation failed for d->chan!\n",
+			__func__);
 		goto exit_release_d;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/flash.c linux-libre-3.7-gnu/arch/arm/mach-omap1/flash.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/flash.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/flash.c	2012-12-10 22:30:57.000000000 -0500
@@ -11,7 +11,7 @@
 #include <linux/mtd/map.h>
 
 #include <plat/tc.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/gpio15xx.c linux-libre-3.7-gnu/arch/arm/mach-omap1/gpio15xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/gpio15xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/gpio15xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/gpio16xx.c linux-libre-3.7-gnu/arch/arm/mach-omap1/gpio16xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/gpio16xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/gpio16xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP1610_GPIO1_BASE		0xfffbe400
 #define OMAP1610_GPIO2_BASE		0xfffbec00
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/gpio7xx.c linux-libre-3.7-gnu/arch/arm/mach-omap1/gpio7xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/gpio7xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/gpio7xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
 #define OMAP7XX_GPIO2_BASE		0xfffbc800
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/i2c.c linux-libre-3.7-gnu/arch/arm/mach-omap1/i2c.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/i2c.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/i2c.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,7 +20,7 @@
  */
 
 #include <plat/i2c.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
 
 void __init omap1_i2c_mux_pins(int bus_id)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h	2012-12-10 22:30:57.000000000 -0500
@@ -14,8 +14,6 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
-#include <plat/irqs.h>
-
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
  * IRQ12, described as reserved, has been selected.
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/board-ams-delta.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/board-ams-delta.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/board-ams-delta.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/board-ams-delta.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
+#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
+#define AMS_DELTA_GPIO_PIN_CONFIG	11
+#define AMS_DELTA_GPIO_PIN_NAND_RB	12
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN		240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP		241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE		242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE		243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP		244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE		245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE		246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE		247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR		248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT	249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN		250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC		251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET		252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC		253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE	AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO		16
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+	ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+			AMS_DELTA_LATCH2_NGPIO, (mask), (value))
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/board-sx1.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/board-sx1.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/board-sx1.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/board-sx1.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL	0x2B
+
+#define SOFIA_I2C_ADDR		0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG	0x03
+
+#define	SOFIA_USB_POWER		0x01
+#define	SOFIA_MMC_POWER		0x04
+#define	SOFIA_BLUETOOTH_POWER	0x08
+#define	SOFIA_MMILIGHT_POWER	0x20
+
+#define SOFIA_POWER2_REG	0x04
+#define SOFIA_BACKLIGHT_REG	0x06
+#define SOFIA_KEYLIGHT_REG	0x07
+#define SOFIA_DIMMING_REG	0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/board-voiceblue.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/board-voiceblue.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/board-voiceblue.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/board-voiceblue.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/flash.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/flash.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/flash.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/flash.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,17 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+struct platform_device;
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/gpio.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/gpio.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/gpio.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/gpio.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap1/include/mach/gpio.h
  */
-
-#include <plat/gpio.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/hardware.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/hardware.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/hardware.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/hardware.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,11 +1,46 @@
 /*
  * arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
 
+#include <asm/sizes.h>
 #ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
@@ -35,7 +70,249 @@
 			? 0 : OMAP_CS3_PHYS;
 }
 
-#endif
+#endif	/* ifndef __ASSEMBLER__ */
+
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
 #endif
 
-#include <plat/hardware.h>
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/irda.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/irda.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/irda.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/irda.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL		1	/* Selects IrDA */
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+#define IR_MIRMODE	8
+
+struct omap_irda_config {
+	int transceiver_cap;
+	int (*transceiver_mode)(struct device *dev, int mode);
+	int (*select_irda)(struct device *dev, int state);
+	int rx_channel;
+	int tx_channel;
+	unsigned long dest_start;
+	unsigned long src_start;
+	int tx_trigger;
+	int rx_trigger;
+	int mode;
+};
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/irqs.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/irqs.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/irqs.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/irqs.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,5 +1,268 @@
 /*
- * arch/arm/mach-omap1/include/mach/irqs.h
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
  */
 
-#include <plat/irqs.h>
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define NR_IRQS			OMAP_FPGA_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/mux.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/mux.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/mux.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/mux.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,454 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+struct pin_config {
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
+
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+	/* OMAP 730 keyboard */
+	E2_7XX_KBR0,
+	J7_7XX_KBR1,
+	E1_7XX_KBR2,
+	F3_7XX_KBR3,
+	D2_7XX_KBR4,
+	C2_7XX_KBC0,
+	D3_7XX_KBC1,
+	E4_7XX_KBC2,
+	F4_7XX_KBC3,
+	E3_7XX_KBC4,
+
+	/* USB */
+	AA17_7XX_USB_DM,
+	W16_7XX_USB_PU_EN,
+	W17_7XX_USB_VBUSI,
+	W18_7XX_USB_DMCK_OUT,
+	W19_7XX_USB_DCRST,
+
+	/* MMC */
+	MMC_7XX_CMD,
+	MMC_7XX_CLK,
+	MMC_7XX_DAT0,
+
+	/* I2C */
+	I2C_7XX_SCL,
+	I2C_7XX_SDA,
+
+	/* SPI */
+	SPI_7XX_1,
+	SPI_7XX_2,
+	SPI_7XX_3,
+	SPI_7XX_4,
+	SPI_7XX_5,
+	SPI_7XX_6,
+
+	/* UART */
+	UART_7XX_1,
+	UART_7XX_2,
+};
+
+enum omap1xxx_index {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	N15_1610_MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP16XX GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N20_1610_GPIO11,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 SPI */
+	U19_1610_SPIF_SCK,
+	U18_1610_SPIF_DIN,
+	P20_1610_SPIF_DIN,
+	W21_1610_SPIF_DOUT,
+	R18_1610_SPIF_DOUT,
+	N14_1610_SPIF_CS0,
+	N15_1610_SPIF_CS1,
+	T19_1610_SPIF_CS2,
+	P15_1610_SPIF_CS3,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* 16XX UART */
+	R13_1610_UART1_TX,
+	V14_16XX_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/omap1510.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/omap1510.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/omap1510.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/omap1510.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,49 @@
+/*
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE	0xE0000000
+#define OMAP1510_DSP_SIZE	0x28000
+#define OMAP1510_DSP_START	0xE0000000
+
+#define OMAP1510_DSPREG_BASE	0xE1000000
+#define OMAP1510_DSPREG_SIZE	SZ_128K
+#define OMAP1510_DSPREG_START	0xE1000000
+
+#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/omap16xx.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/omap16xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/omap16xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/omap16xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,201 @@
+/*
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE	0xE0000000
+#define OMAP16XX_DSP_SIZE	0x28000
+#define OMAP16XX_DSP_START	0xE0000000
+
+#define OMAP16XX_DSPREG_BASE	0xE1000000
+#define OMAP16XX_DSPREG_SIZE	SZ_128K
+#define OMAP16XX_DSPREG_START	0xE1000000
+
+#define OMAP16XX_SEC_BASE	0xFFFE4000
+#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE		 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Mapping through MPU bus */
+#define UART3_RHR               (OMAP1_UART3_BASE + 0)
+#define UART3_THR               (OMAP1_UART3_BASE + 0)
+#define UART3_DLL               (OMAP1_UART3_BASE + 0)
+#define UART3_IER               (OMAP1_UART3_BASE + 4)
+#define UART3_DLH               (OMAP1_UART3_BASE + 4)
+#define UART3_IIR               (OMAP1_UART3_BASE + 8)
+#define UART3_FCR               (OMAP1_UART3_BASE + 8)
+#define UART3_EFR               (OMAP1_UART3_BASE + 8)
+#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
+#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/omap7xx.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/omap7xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/omap7xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/omap7xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,106 @@
+/*
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE	0xE0000000
+#define OMAP7XX_DSP_SIZE	0x50000
+#define OMAP7XX_DSP_START	0xE0000000
+
+#define OMAP7XX_DSPREG_BASE	0xE1000000
+#define OMAP7XX_DSPREG_SIZE	SZ_128K
+#define OMAP7XX_DSPREG_START	0xE1000000
+
+#define OMAP7XX_SPI1_BASE	0xfffc0800
+#define OMAP7XX_SPI2_BASE	0xfffc1000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE	0xfffe1000
+#define OMAP7XX_IO_CONF_0	0xfffe1070
+#define OMAP7XX_IO_CONF_1	0xfffe1074
+#define OMAP7XX_IO_CONF_2	0xfffe1078
+#define OMAP7XX_IO_CONF_3	0xfffe107c
+#define OMAP7XX_IO_CONF_4	0xfffe1080
+#define OMAP7XX_IO_CONF_5	0xfffe1084
+#define OMAP7XX_IO_CONF_6	0xfffe1088
+#define OMAP7XX_IO_CONF_7	0xfffe108c
+#define OMAP7XX_IO_CONF_8	0xfffe1090
+#define OMAP7XX_IO_CONF_9	0xfffe1094
+#define OMAP7XX_IO_CONF_10	0xfffe1098
+#define OMAP7XX_IO_CONF_11	0xfffe109c
+#define OMAP7XX_IO_CONF_12	0xfffe10a0
+#define OMAP7XX_IO_CONF_13	0xfffe10a4
+
+#define OMAP7XX_MODE_1		0xfffe1010
+#define OMAP7XX_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0	0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
+#define OMAP7XX_FLASH_CFG_1	0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE	0xfffbb800
+#define OMAP7XX_DSP_M_CTL	0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/smp.h linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/smp.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/include/mach/smp.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/include/mach/smp.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/smp.h
- */
-
-#include <plat/smp.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/io.c linux-libre-3.7-gnu/arch/arm/mach-omap1/io.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/io.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/io.c	2012-12-10 22:30:57.000000000 -0500
@@ -16,7 +16,7 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/Kconfig linux-libre-3.7-gnu/arch/arm/mach-omap1/Kconfig
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/Kconfig	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/Kconfig	2012-12-10 22:30:57.000000000 -0500
@@ -8,15 +8,15 @@
 config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
+	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_MPU_TIMER
-	select ARCH_OMAP_OTG
 
 config ARCH_OMAP850
 	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
-	select CPU_ARM926T
 	select ARCH_OMAP_OTG
+	select CPU_ARM926T
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
@@ -28,8 +28,8 @@
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
 	bool "OMAP16xx Based System"
-	select CPU_ARM926T
 	select ARCH_OMAP_OTG
+	select CPU_ARM926T
 
 comment "OMAP Board Type"
 	depends on ARCH_OMAP1
@@ -132,8 +132,8 @@
 
 config MACH_SX1
 	bool "Siemens SX1"
-	select I2C
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select I2C
 	help
 	  Support for the Siemens SX1 phone. To boot the kernel,
 	  you'll need a SX1 compatible bootloader; check out
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/lcd_dma.c linux-libre-3.7-gnu/arch/arm/mach-omap1/lcd_dma.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/lcd_dma.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/lcd_dma.c	2012-12-10 22:30:57.000000000 -0500
@@ -113,8 +113,7 @@
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
 	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA virtual resolution is not supported "
-				"in 1510 mode\n");
+		pr_err("DMA virtual resolution is not supported in 1510 mode\n");
 		BUG();
 	}
 	lcd_dma.vxres = vxres;
@@ -437,8 +436,7 @@
 	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
 			"LCD DMA", NULL);
 	if (r != 0)
-		printk(KERN_ERR "unable to request IRQ for LCD DMA "
-			       "(error %d)\n", r);
+		pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
 
 	return r;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/leds.c linux-libre-3.7-gnu/arch/arm/mach-omap1/leds.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/leds.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/leds.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,69 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (machine_is_omap_innovator())
-		leds_event = innovator_leds_event;
-
-	else if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2())
-		leds_event = h2p2_dbg_leds_event;
-
-	else if (machine_is_omap_osk())
-		leds_event = osk_leds_event;
-
-	else
-		return -1;
-
-	if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-			|| machine_is_omap_osk()
-#endif
-			) {
-
-		/* LED1/LED2 pins can be used as GPIO (as done here), or by
-		 * the LPG (works even in deep sleep!), to drive a bicolor
-		 * LED on the H2 sample board, and another on the H2/P2
-		 * "surfer" expansion board.
-		 *
-		 * The same pins drive a LED on the OSK Mistral board, but
-		 * that's a different kind of LED (just one color at a time).
-		 */
-		omap_cfg_reg(P18_1610_GPIO3);
-		if (gpio_request(3, "LED red") == 0)
-			gpio_direction_output(3, 1);
-		else
-			printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
-		omap_cfg_reg(MPUIO4);
-		if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
-			gpio_direction_output(OMAP_MPUIO(4), 1);
-		else
-			printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
-	}
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(omap_leds_init);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/leds.h linux-libre-3.7-gnu/arch/arm/mach-omap1/leds.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/leds.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/leds.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/leds-h2p2-debug.c linux-libre-3.7-gnu/arch/arm/mach-omap1/leds-h2p2-debug.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/leds-h2p2-debug.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/leds-h2p2-debug.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,166 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	static struct h2p2_dbg_fpga __iomem *fpga;
-	static u16 led_state, hw_led_state;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (!fpga)
-			fpga = ioremap(H2P2_DBG_FPGA_START,
-						H2P2_DBG_FPGA_SIZE);
-		if (fpga) {
-			led_state |= LED_STATE_ENABLED;
-			__raw_writew(~0, &fpga->leds);
-		}
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (! machine_is_omap_perseus2()) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		__raw_writew(~0, &fpga->leds);
-		led_state &= ~LED_STATE_ENABLED;
-		if (evt == led_halted) {
-			iounmap(fpga);
-			fpga = NULL;
-		}
-
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (machine_is_omap_perseus2())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
-
-	case led_idle_end:
-		if (machine_is_omap_perseus2())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	local_irq_restore(flags);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/leds-innovator.c linux-libre-3.7-gnu/arch/arm/mach-omap1/leds-innovator.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/leds-innovator.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/leds-innovator.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,98 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= 0;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= 0;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~0;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/leds-osk.c linux-libre-3.7-gnu/arch/arm/mach-omap1/leds-osk.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/leds-osk.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/leds-osk.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	(1 << 0)
-#define LED_STATE_CLAIMED	(1 << 1)
-static u8 led_state;
-
-#define	TIMER_LED		(1 << 3)	/* Mistral board */
-#define	IDLE_LED		(1 << 4)	/* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context.  This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
-	int	red = 0;
-	int	green = 0;
-
-	if (hw_led_state & TIMER_LED)
-		red = 1;
-	else if (hw_led_state & IDLE_LED)
-		green = 1;
-	/* else both sides are disabled */
-
-	gpio_set_value(GPIO_LED_GREEN, green);
-	gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
-	unsigned long	flags;
-	u16		leds;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	leds = hw_led_state;
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_halted:
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-	case led_timer:
-		hw_led_state ^= TIMER_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_start:	/* idle == off */
-		hw_led_state &= ~IDLE_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_end:
-		hw_led_state |= IDLE_LED;
-		mistral_setled();
-		break;
-
-#endif	/* CONFIG_OMAP_OSK_MISTRAL */
-
-	default:
-		break;
-	}
-
-	leds ^= hw_led_state;
-
-done:
-	local_irq_restore(flags);
-}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/Makefile linux-libre-3.7-gnu/arch/arm/mach-omap1/Makefile
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/Makefile	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/Makefile	2012-12-10 22:30:57.000000000 -0500
@@ -61,14 +61,6 @@
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
 
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
-obj-$(CONFIG_LEDS)			+= $(led-y)
-
 ifneq ($(CONFIG_FB_OMAP),)
 obj-y += lcd_dma.o
 endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/mcbsp.c linux-libre-3.7-gnu/arch/arm/mach-omap1/mcbsp.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/mcbsp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/mcbsp.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,9 +20,9 @@
 #include <linux/slab.h>
 
 #include <plat/dma.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 
 #include <mach/irqs.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/mux.c linux-libre-3.7-gnu/arch/arm/mach-omap1/mux.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/mux.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/mux.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,7 +29,7 @@
 
 #include <mach/hardware.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -451,6 +451,56 @@
 #endif
 }
 
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+			|| !arch_mux_cfg->cfg_reg) {
+		printk(KERN_ERR "Invalid pin table\n");
+		return -EINVAL;
+	}
+
+	mux_cfg = arch_mux_cfg;
+
+	return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+	struct pin_config *reg;
+
+	if (!cpu_class_is_omap1()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (mux_cfg == NULL) {
+		printk(KERN_ERR "Pin mux table not initialized\n");
+		return -ENODEV;
+	}
+
+	if (index >= mux_cfg->size) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, mux_cfg->size);
+		dump_stack();
+		return -ENODEV;
+	}
+
+	reg = &mux_cfg->pins[index];
+
+	if (!mux_cfg->cfg_reg)
+		return -ENODEV;
+
+	return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
 int __init omap1_mux_init(void)
 {
 	if (cpu_is_omap7xx()) {
@@ -468,4 +518,8 @@
 	return omap_mux_register(&arch_mux_cfg);
 }
 
-#endif
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x)	do {} while(0)
+#endif	/* CONFIG_OMAP_MUX */
+
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/pm.c linux-libre-3.7-gnu/arch/arm/mach-omap1/pm.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/pm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/pm.c	2012-12-10 22:30:57.000000000 -0500
@@ -53,7 +53,7 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/serial.c linux-libre-3.7-gnu/arch/arm/mach-omap1/serial.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/serial.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/serial.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,8 +22,7 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
 
 #include "pm.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/time.c linux-libre-3.7-gnu/arch/arm/mach-omap1/time.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/time.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/time.c	2012-12-10 22:30:57.000000000 -0500
@@ -44,7 +44,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/timer32k.c linux-libre-3.7-gnu/arch/arm/mach-omap1/timer32k.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/timer32k.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/timer32k.c	2012-12-10 22:30:57.000000000 -0500
@@ -46,7 +46,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/timer.c linux-libre-3.7-gnu/arch/arm/mach-omap1/timer.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/timer.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/timer.c	2012-12-10 22:30:57.000000000 -0500
@@ -141,7 +141,7 @@
 
 		pdata->set_timer_src = omap1_dm_timer_set_src;
 		pdata->timer_capability = OMAP_TIMER_ALWON |
-				OMAP_TIMER_NEEDS_RESET;
+				OMAP_TIMER_NEEDS_RESET | OMAP_TIMER_HAS_DSP_IRQ;
 
 		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
 		if (ret) {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap1/usb.c linux-libre-3.7-gnu/arch/arm/mach-omap1/usb.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap1/usb.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap1/usb.c	2012-12-10 22:30:57.000000000 -0500
@@ -26,7 +26,7 @@
 
 #include <asm/irq.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/am33xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/am33xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/am33xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/am33xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,25 @@
+/*
+ * This file contains the address info for various AM33XX modules.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_AM33XX_H
+#define __ASM_ARCH_AM33XX_H
+
+#define L4_SLOW_AM33XX_BASE	0x48000000
+
+#define AM33XX_SCM_BASE		0x44E10000
+#define AM33XX_CTRL_BASE	AM33XX_SCM_BASE
+#define AM33XX_PRCM_BASE	0x44E00000
+
+#endif /* __ASM_ARCH_AM33XX_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/am35xx-emac.c linux-libre-3.7-gnu/arch/arm/mach-omap2/am35xx-emac.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/am35xx-emac.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/am35xx-emac.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,7 @@
 #include <linux/davinci_emac.h>
 #include <asm/system.h>
 #include <plat/omap_device.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
 #include "control.h"
 #include "am35xx-emac.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/am35xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/am35xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/am35xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/am35xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for AM35XX specific interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ *	   Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AM35XX_H
+#define __ASM_ARCH_AM35XX_H
+
+/*
+ * Base addresses
+ *	Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
+ */
+#define AM35XX_IPSS_EMAC_BASE		0x5C000000
+#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
+#define AM35XX_IPSS_HECC_BASE		0x5C050000
+#define AM35XX_IPSS_VPFE_BASE		0x5C060000
+
+
+/* HECC module specifc offset definitions */
+#define AM35XX_HECC_SCC_HECC_OFFSET	(0x0)
+#define AM35XX_HECC_SCC_RAM_OFFSET	(0x3000)
+#define AM35XX_HECC_RAM_OFFSET		(0x3000)
+#define AM35XX_HECC_MBOX_OFFSET		(0x2000)
+#define AM35XX_HECC_INT_LINE		(0x0)
+#define AM35XX_HECC_VERSION		(0x1)
+
+#define AM35XX_EMAC_CNTRL_OFFSET	(0x10000)
+#define AM35XX_EMAC_CNTRL_MOD_OFFSET	(0x0)
+#define AM35XX_EMAC_CNTRL_RAM_OFFSET	(0x20000)
+#define AM35XX_EMAC_MDIO_OFFSET		(0x30000)
+#define AM35XX_IPSS_MDIO_BASE		(AM35XX_IPSS_EMAC_BASE + \
+						AM35XX_EMAC_MDIO_OFFSET)
+#define AM35XX_EMAC_CNTRL_RAM_SIZE	(0x2000)
+#define AM35XX_EMAC_RAM_ADDR		(AM3517_EMAC_BASE + \
+						AM3517_EMAC_CNTRL_RAM_OFFSET)
+#define AM35XX_EMAC_HW_RAM_ADDR		(0x01E20000)
+
+#endif  /*  __ASM_ARCH_AM35XX_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-2430sdp.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-2430sdp.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-2430sdp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-2430sdp.c	2012-12-10 22:30:57.000000000 -0500
@@ -33,11 +33,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -212,9 +211,6 @@
 };
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
 static struct twl4030_platform_data sdp2430_twldata = {
@@ -235,7 +231,7 @@
 	sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+	omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
 			&sdp2430_twldata);
 	return 0;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-3430sdp.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-3430sdp.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-3430sdp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-3430sdp.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,14 +24,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include <plat/usb.h>
 #include "common.h"
 #include <plat/dma.h>
@@ -39,7 +37,7 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
 
 #include "board-flash.h"
 #include "mux.h"
@@ -191,9 +189,6 @@
 	.default_device	= &sdp3430_lcd_device,
 };
 
-static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -233,9 +228,6 @@
 }
 
 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(16) | BIT(17),
 	.setup		= sdp3430_twl_gpio_setup,
@@ -576,8 +568,6 @@
 	int gpio_pendown;
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-3630sdp.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-3630sdp.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-3630sdp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-3630sdp.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,8 +17,7 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/board.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
@@ -67,9 +66,6 @@
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -197,8 +193,6 @@
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	omap_board_config = sdp_config;
-	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	zoom_peripherals_init();
 	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
 				  h8mbx00u0mer0em_sdrc_params);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-4430sdp.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-4430sdp.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-4430sdp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-4430sdp.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,23 +28,22 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-nokia-dsi.h>
 #include <video/omap-panel-picodlp.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
@@ -544,7 +543,14 @@
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+		.irq = 119 + OMAP44XX_IRQ_GIC_START,
+		.platform_data = &twl6040_data,
+	},
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
@@ -580,8 +586,8 @@
 			TWL_COMMON_REGULATOR_CLK32KG |
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
-	omap4_pmic_init("twl6030", &sdp4430_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+	omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo,
+			ARRAY_SIZE(sdp4430_i2c_1_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
@@ -601,29 +607,6 @@
 			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 }
 
-static struct gpio sdp4430_hdmi_gpios[] = {
-	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
-	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_ls_oe" },
-	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
-};
-
-static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
-{
-	int status;
-
-	status = gpio_request_array(sdp4430_hdmi_gpios,
-				    ARRAY_SIZE(sdp4430_hdmi_gpios));
-	if (status)
-		pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
-
-	return status;
-}
-
-static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
-{
-	gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
-}
-
 static struct nokia_dsi_panel_data dsi1_panel = {
 		.name		= "taal",
 		.reset_gpio	= 102,
@@ -644,29 +627,6 @@
 	.phy.dsi		= {
 		.module		= 0,
 	},
-
-	.clocks = {
-		.dispc = {
-			.channel = {
-				/* Logic Clock = 172.8 MHz */
-				.lck_div	= 1,
-				/* Pixel Clock = 34.56 MHz */
-				.pck_div	= 5,
-				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
-			},
-			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
-		},
-
-		.dsi = {
-			.regn		= 16,	/* Fint = 2.4 MHz */
-			.regm		= 180,	/* DDR Clock = 216 MHz */
-			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
-			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
-
-			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
-			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
-		},
-	},
 	.channel		= OMAP_DSS_CHANNEL_LCD,
 };
 
@@ -691,33 +651,12 @@
 
 		.module		= 1,
 	},
-
-	.clocks = {
-		.dispc = {
-			.channel = {
-				/* Logic Clock = 172.8 MHz */
-				.lck_div	= 1,
-				/* Pixel Clock = 34.56 MHz */
-				.pck_div	= 5,
-				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
-			},
-			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
-		},
-
-		.dsi = {
-			.regn		= 16,	/* Fint = 2.4 MHz */
-			.regm		= 180,	/* DDR Clock = 216 MHz */
-			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
-			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
-
-			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
-			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
-		},
-	},
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
 static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
@@ -725,8 +664,6 @@
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
 	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.platform_enable = sdp4430_panel_enable_hdmi,
-	.platform_disable = sdp4430_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
 	.data = &sdp4430_hdmi_data,
 };
@@ -824,6 +761,32 @@
 	/* NIRQ2 for twl6040 */
 	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
 		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+	/* GPIO_127 for twl6040 */
+	OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	/* McPDM */
+	OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	/* DMIC */
+	OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	/* McBSP1 */
+	OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+		  OMAP_PULL_ENA),
+	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	/* McBSP2 */
+	OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+		  OMAP_PULL_ENA),
+	OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
@@ -909,6 +872,7 @@
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(omap4_smp_ops),
 	.reserve	= omap_reserve,
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-am3517crane.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-am3517crane.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-am3517crane.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-am3517crane.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,12 +21,10 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 
@@ -37,11 +35,6 @@
 #define GPIO_USB_POWER		35
 #define GPIO_USB_NRESET		38
 
-
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -67,9 +60,6 @@
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 
-	omap_board_config = am3517_crane_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
-
 	/* Configure GPIO for EHCI port */
 	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
 		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-am3517evm.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-am3517evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-am3517evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-am3517evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,14 +25,13 @@
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
 
-#include <mach/hardware.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -264,6 +263,16 @@
 	usb_musb_init(&musb_board_data);
 }
 
+static __init void am3517_evm_mcbsp1_init(void)
+{
+	u32 devconf0;
+
+	/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
+	devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	devconf0 |=  OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
+	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
+}
+
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -296,8 +305,7 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -324,9 +332,6 @@
 	platform_device_register(&am3517_hecc_device);
 }
 
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -346,8 +351,6 @@
 
 static void __init am3517_evm_init(void)
 {
-	omap_board_config = am3517_evm_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	am3517_evm_i2c_init();
@@ -373,6 +376,9 @@
 	/* MUSB */
 	am3517_evm_musb_init();
 
+	/* McBSP1 */
+	am3517_evm_mcbsp1_init();
+
 	/* MMC init function */
 	omap_hsmmc_init(mmc);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-apollon.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-apollon.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-apollon.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-apollon.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,13 +29,11 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
 #include <plat/led.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 
@@ -204,7 +202,7 @@
 		return;
 	}
 
-	clk_enable(gpmc_fck);
+	clk_prepare_enable(gpmc_fck);
 	rate = clk_get_rate(gpmc_fck);
 
 	eth_cs = APOLLON_ETH_CS;
@@ -248,7 +246,7 @@
 		gpmc_cs_free(APOLLON_ETH_CS);
 	}
 out:
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-cm-t3517.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-cm-t3517.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-cm-t3517.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-cm-t3517.c	2012-12-10 22:30:57.000000000 -0500
@@ -38,13 +38,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/gpmc.h>
 
-#include <mach/am35xx.h>
+#include "am35xx.h"
 
 #include "mux.h"
 #include "control.h"
@@ -90,8 +89,7 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -249,9 +247,6 @@
 static inline void cm_t3517_init_nand(void) {}
 #endif
 
-static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
@@ -285,8 +280,6 @@
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = cm_t3517_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 	cm_t3517_init_leds();
 	cm_t3517_init_nand();
 	cm_t3517_init_rtc();
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-cm-t35.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-cm-t35.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-cm-t35.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-cm-t35.c	2012-12-10 22:30:57.000000000 -0500
@@ -23,6 +23,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
@@ -37,15 +38,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <mach/hardware.h>
 
@@ -64,7 +64,7 @@
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
 	.id		= 0,
@@ -470,9 +470,6 @@
 }
 
 static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup          = cm_t35_twl_gpio_setup,
 };
 
@@ -714,13 +711,8 @@
 static inline void cm_t3730_init_mux(void) {}
 #endif
 
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
 static void __init cm_t3x_common_init(void)
 {
-	omap_board_config = cm_t35_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
@@ -731,6 +723,7 @@
 	cm_t35_init_ethernet();
 	cm_t35_init_led();
 	cm_t35_init_display();
+	omap_twl4030_audio_init("cm-t3x");
 
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-devkit8000.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-devkit8000.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-devkit8000.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-devkit8000.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,31 +32,27 @@
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <mach/id.h>
+#include "id.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/dm9000.h>
 #include <linux/interrupt.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
-
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
@@ -236,9 +232,6 @@
 }
 
 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
@@ -630,6 +623,7 @@
 	usbhs_init(&usbhs_bdata);
 	omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
 			     ARRAY_SIZE(devkit8000_nand_partitions));
+	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-flash.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-flash.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-flash.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-flash.c	2012-12-10 22:30:57.000000000 -0500
@@ -16,13 +16,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
-#include <plat/irqs.h>
 
+#include <plat/cpu.h>
 #include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 #include <plat/tc.h>
 
+#include "common.h"
 #include "board-flash.h"
 
 #define REG_FPGA_REV			0x10
@@ -140,7 +141,6 @@
 	board_nand_data.devsize		= nand_type;
 
 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -218,7 +218,7 @@
 			if (onenandcs > GPMC_CS_NUM)
 				onenandcs = cs;
 			break;
-		};
+		}
 		cs++;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-generic.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-generic.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-generic.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-generic.c	2012-12-10 22:30:57.000000000 -0500
@@ -16,11 +16,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include "common-board-devices.h"
 
@@ -127,6 +125,7 @@
 
 DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
+	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= omap_gic_of_init,
@@ -147,6 +146,7 @@
 
 DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
+	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap5_map_io,
 	.init_early	= omap5_init_early,
 	.init_irq	= omap_gic_of_init,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-h4.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-h4.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-h4.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-h4.c	2012-12-10 22:30:57.000000000 -0500
@@ -27,20 +27,19 @@
 #include <linux/io.h>
 #include <linux/input/matrix_keypad.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
-#include "common.h"
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
+#include "debug-devices.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 
+#include "common.h"
 #include "mux.h"
 #include "control.h"
 
@@ -266,9 +265,9 @@
 		return;
 	}
 
-	clk_enable(gpmc_fck);
+	clk_prepare_enable(gpmc_fck);
 	rate = clk_get_rate(gpmc_fck);
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 
 	if (is_gpmc_muxed())
@@ -312,7 +311,7 @@
 		gpmc_cs_free(eth_cs);
 
 out:
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-igep0020.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-igep0020.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-igep0020.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-igep0020.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,13 +29,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -192,7 +192,7 @@
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
 #include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data smsc911x_cfg = {
 	.cs             = IGEP2_SMSC911X_CS,
@@ -425,9 +425,6 @@
 };
 
 static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= igep_twl_gpio_setup,
 };
@@ -583,6 +580,11 @@
 	} else
 		return;
 
+	/* Make sure that the GPIO pins are muxed correctly */
+	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
 	err = gpio_request_array(igep_wlan_bt_gpios,
 				 ARRAY_SIZE(igep_wlan_bt_gpios));
 	if (err) {
@@ -628,6 +630,7 @@
 
 	igep_flash_init();
 	igep_leds_init();
+	omap_twl4030_audio_init("igep2");
 
 	/*
 	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-ldp.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-ldp.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-ldp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-ldp.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,21 +28,17 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <mach/board-zoom.h>
-
-#include <asm/delay.h>
 #include <plat/usb.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -275,9 +271,6 @@
 }
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= ldp_twl_gpio_setup,
 };
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-n8x0.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-n8x0.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-n8x0.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-n8x0.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,19 +20,16 @@
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 #include <sound/tlv320aic3x.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/menelaus.h>
-#include <mach/irqs.h>
-#include <plat/mcspi.h>
-#include <plat/onenand.h>
 #include <plat/mmc.h>
-#include <plat/serial.h>
 
 #include "mux.h"
 
@@ -553,8 +550,8 @@
 
 	ret = menelaus_set_regulator_sleep(1, val);
 	if (ret < 0) {
-		printk(KERN_ERR "Could not set regulators to sleep on "
-			"menelaus: %u\n", ret);
+		pr_err("Could not set regulators to sleep on menelaus: %u\n",
+		       ret);
 		return ret;
 	}
 	return 0;
@@ -566,8 +563,7 @@
 
 	ret = menelaus_set_vcore_hw(1400, 1050);
 	if (ret < 0) {
-		printk(KERN_ERR "Could not set VCORE voltage on "
-			"menelaus: %u\n", ret);
+		pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
 		return ret;
 	}
 	return 0;
@@ -600,7 +596,7 @@
 static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
 	{
 		I2C_BOARD_INFO("menelaus", 0x72),
-		.irq = INT_24XX_SYS_NIRQ,
+		.irq = 7 + OMAP_INTC_START,
 		.platform_data = &n8x0_menelaus_platform_data,
 	},
 };
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3beagle.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3beagle.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3beagle.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3beagle.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/opp.h>
+#include <linux/cpu.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -33,18 +34,16 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
 
@@ -297,9 +296,6 @@
 }
 
 static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
@@ -449,27 +445,31 @@
 };
 #endif
 
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
 {
 	int r = 0;
 
-	/* Initialize the omap3 opp table */
-	if (omap3_opp_init()) {
+	if (!machine_is_omap3_beagle())
+		return 0;
+
+	/* Initialize the omap3 opp table if not already created. */
+	r = omap3_opp_init();
+	if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
 		pr_err("%s: opp default init failed\n", __func__);
-		return;
+		return r;
 	}
 
 	/* Custom OPP enabled for all xM versions */
 	if (cpu_is_omap3630()) {
 		struct device *mpu_dev, *iva_dev;
 
-		mpu_dev = omap_device_get_by_hwmod_name("mpu");
+		mpu_dev = get_cpu_device(0);
 		iva_dev = omap_device_get_by_hwmod_name("iva");
 
-		if (!mpu_dev || !iva_dev) {
+		if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
 			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
 				__func__, mpu_dev, iva_dev);
-			return;
+			return -ENODEV;
 		}
 		/* Enable MPU 1GHz and lower opps */
 		r = opp_enable(mpu_dev, 800000000);
@@ -489,8 +489,9 @@
 			opp_disable(iva_dev, 660000000);
 		}
 	}
-	return;
+	return 0;
 }
+device_initcall(beagle_opp_init);
 
 static void __init omap3_beagle_init(void)
 {
@@ -519,6 +520,7 @@
 	usbhs_init(&usbhs_bdata);
 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
 			     ARRAY_SIZE(omap3beagle_nand_partitions));
+	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure msecure is mux'd to be able to set the RTC. */
 	omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
@@ -526,8 +528,6 @@
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	beagle_opp_init();
 }
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3evm.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,6 +32,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/nop-usb-xceiv.h>
 #include <linux/smsc911x.h>
 
 #include <linux/wl12xx.h>
@@ -40,16 +41,14 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include "common.h"
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 
@@ -75,13 +74,24 @@
 #define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
 #define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
 
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
+
 static u8 omap3_evm_version;
 
-u8 get_omap3_evm_rev(void)
+static u8 get_omap3_evm_rev(void)
 {
 	return omap3_evm_version;
 }
-EXPORT_SYMBOL(get_omap3_evm_rev);
 
 static void __init omap3_evm_get_revision(void)
 {
@@ -108,7 +118,7 @@
 }
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data smsc911x_cfg = {
 	.cs             = OMAP3EVM_SMSC911X_CS,
@@ -377,9 +387,6 @@
 }
 
 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3evm_twl_gpio_setup,
 };
@@ -526,9 +533,6 @@
 	return 0;
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -688,9 +692,6 @@
 	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
 	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
 
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);
 
@@ -737,6 +738,7 @@
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
 	omap3_evm_wl12xx_init();
+	omap_twl4030_audio_init("omap3evm");
 }
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3logic.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3logic.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3logic.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3logic.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,24 +30,21 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "gpmc-smsc911x.h"
+#include <plat/gpmc.h>
+#include <plat/sdrc.h>
+#include <plat/usb.h>
+
+#include "common.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
 
-#include <plat/mux.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc-smsc911x.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/usb.h>
-
 #define OMAP3LOGIC_SMSC911X_CS			1
 
 #define OMAP3530_LV_SOM_MMC_GPIO_CD		110
@@ -78,9 +75,6 @@
 };
 
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3pandora.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3pandora.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3pandora.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3pandora.c	2012-12-10 22:30:57.000000000 -0500
@@ -35,18 +35,16 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
-#include <mach/hardware.h>
-#include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -321,9 +319,6 @@
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3stalker.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3stalker.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3stalker.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3stalker.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,28 +28,26 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 
-#include <plat/mcspi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
@@ -57,7 +55,7 @@
 #include "common-board-devices.h"
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 #define OMAP3STALKER_ETHR_START	0x2c000000
 #define OMAP3STALKER_ETHR_SIZE	1024
@@ -279,9 +277,6 @@
 }
 
 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3stalker_twl_gpio_setup,
 };
@@ -362,9 +357,6 @@
 
 #define OMAP3_STALKER_TS_GPIO	175
 
-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
-};
-
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
@@ -399,8 +391,6 @@
 {
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-	omap_board_config = omap3_stalker_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
 
 	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3touchbook.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3touchbook.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap3touchbook.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap3touchbook.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,7 +29,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
 
 #include <linux/spi/ads7846.h>
@@ -37,17 +37,15 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/system_info.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 
 #include "mux.h"
@@ -139,9 +137,6 @@
 }
 
 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap4panda.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap4panda.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-omap4panda.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-omap4panda.c	2012-12-10 22:30:57.000000000 -0500
@@ -32,19 +32,18 @@
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <video/omapdss.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-tfp410.h>
 
+#include "soc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "mux.h"
@@ -172,7 +171,7 @@
 		return;
 	}
 	clk_set_rate(phy_ref_clk, 19200000);
-	clk_enable(phy_ref_clk);
+	clk_prepare_enable(phy_ref_clk);
 
 	/* disable the power to the usb hub prior to init and reset phy+hub */
 	ret = gpio_request_array(panda_ehci_gpios,
@@ -248,8 +247,7 @@
 };
 
 static struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
-	/* PANDA ref clock is 38.4 MHz */
-	.board_ref_clock = 2,
+	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
 };
 
 static struct twl6040_codec_data twl6040_codec = {
@@ -263,7 +261,14 @@
 static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
+static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+		.irq = 119 + OMAP44XX_IRQ_GIC_START,
+		.platform_data = &twl6040_data,
+	},
 };
 
 /* Panda board uses the common PMIC configuration */
@@ -293,8 +298,8 @@
 			TWL_COMMON_REGULATOR_CLK32KG |
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo,
+			ARRAY_SIZE(panda_i2c_1_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP
@@ -382,6 +387,21 @@
 	/* NIRQ2 for twl6040 */
 	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
 		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+	/* GPIO_127 for twl6040 */
+	OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	/* McPDM */
+	OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	/* McBSP1 */
+	OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+		  OMAP_PULL_ENA),
+	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
@@ -408,30 +428,9 @@
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-static struct gpio panda_hdmi_gpios[] = {
-	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
-	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
-	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
-};
-
-static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
-{
-	int status;
-
-	status = gpio_request_array(panda_hdmi_gpios,
-				    ARRAY_SIZE(panda_hdmi_gpios));
-	if (status)
-		pr_err("Cannot request HDMI GPIOs\n");
-
-	return status;
-}
-
-static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
-{
-	gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
-}
-
 static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
@@ -439,8 +438,6 @@
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
 	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.platform_enable = omap4_panda_panel_enable_hdmi,
-	.platform_disable = omap4_panda_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
 	.data = &omap4_panda_hdmi_data,
 };
@@ -518,6 +515,7 @@
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(omap4_smp_ops),
 	.reserve	= omap_reserve,
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-overo.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-overo.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-overo.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-overo.c	2012-12-10 22:30:57.000000000 -0500
@@ -37,21 +37,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
-#include <mach/hardware.h>
-#include <plat/nand.h>
-#include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include "mux.h"
@@ -116,7 +114,7 @@
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
 #include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data smsc911x_cfg = {
 	.id		= 0,
@@ -399,9 +397,6 @@
 }
 
 static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };
@@ -509,6 +504,7 @@
 	overo_display_init();
 	overo_init_led();
 	overo_init_keys();
+	omap_twl4030_audio_init("overo");
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -522,8 +518,7 @@
 		udelay(10);
 		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
 	} else {
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_W2W_NRESET\n");
+		pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
 	}
 
 	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
@@ -542,8 +537,7 @@
 	if (ret == 0)
 		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
 	else
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_USBH_CPEN\n");
+		pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rm680.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rm680.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rm680.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rm680.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,6 +17,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -26,7 +27,7 @@
 #include <plat/usb.h>
 #include <plat/gpmc.h>
 #include "common.h"
-#include <plat/onenand.h>
+#include <plat/serial.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -72,9 +73,6 @@
 
 /* TWL */
 static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pullups		= BIT(0),
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
@@ -87,7 +85,7 @@
 static void __init rm680_i2c_init(void)
 {
 	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
+	omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,14 +17,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51.h linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,11 @@
+/*
+ * Defines for rx51 boards
+ */
+
+#ifndef _OMAP_BOARD_RX51_H
+#define _OMAP_BOARD_RX51_H
+
+extern void __init rx51_peripherals_init(void);
+extern void __init rx51_video_mem_init(void);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c	2012-12-10 22:30:57.000000000 -0500
@@ -25,17 +25,18 @@
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
 #include <linux/power/isp1704_charger.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
 #include <asm/system_info.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
-#include <plat/onenand.h>
-#include <plat/gpmc-smc91x.h>
+#include <plat/omap-pm.h>
+#include "gpmc-smc91x.h"
 
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
@@ -46,6 +47,10 @@
 #include <../drivers/staging/iio/light/tsl2563.h>
 #include <linux/lis3lv02d.h>
 
+#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
+#include <media/ir-rx51.h>
+#endif
+
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
@@ -743,7 +748,7 @@
 	.subdev_board_info = &rx51_si4713_board_info,
 };
 
-static struct platform_device rx51_si4713_dev = {
+static struct platform_device rx51_si4713_dev __initdata_or_module = {
 	.name	= "radio-si4713",
 	.id	= -1,
 	.dev	= {
@@ -774,9 +779,6 @@
 }
 
 static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
 				| BIT(4) | BIT(5)
 				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
@@ -1051,7 +1053,7 @@
 	rx51_twldata.vdac->constraints.apply_uV = true;
 	rx51_twldata.vdac->constraints.name = "VDAC";
 
-	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
+	omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
@@ -1220,6 +1222,30 @@
 				gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
 }
 
+#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
+static struct lirc_rx51_platform_data rx51_lirc_data = {
+	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
+	.pwm_timer = 9, /* Use GPT 9 for CIR */
+};
+
+static struct platform_device rx51_lirc_device = {
+	.name           = "lirc_rx51",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &rx51_lirc_data,
+	},
+};
+
+static void __init rx51_init_lirc(void)
+{
+	platform_device_register(&rx51_lirc_device);
+}
+#else
+static void __init rx51_init_lirc(void)
+{
+}
+#endif
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
@@ -1230,6 +1256,7 @@
 	rx51_init_wl1251();
 	rx51_init_tsc2005();
 	rx51_init_si4713();
+	rx51_init_lirc();
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51-video.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51-video.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-rx51-video.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-rx51-video.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,9 +17,9 @@
 #include <asm/mach-types.h>
 #include <video/omapdss.h>
 #include <plat/vram.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
 
 #include "mux.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-ti8168evm.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-ti8168evm.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-ti8168evm.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-ti8168evm.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,13 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/irqs.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 
@@ -32,15 +29,10 @@
 	.power		= 500,
 };
 
-static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
-};
-
 static void __init ti81xx_evm_init(void)
 {
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = ti81xx_evm_config;
-	omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
 	usb_musb_init(&musb_board_data);
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/board.h>
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,10 +18,13 @@
 #include <linux/regulator/machine.h>
 
 #include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 #include <mach/board-zoom.h>
 
+#include "soc.h"
+#include "common.h"
+
 #define ZOOM_SMSC911X_CS	7
 #define ZOOM_SMSC911X_GPIO	158
 #define ZOOM_QUADUART_CS	3
@@ -81,8 +84,7 @@
 	quart_cs = ZOOM_QUADUART_CS;
 
 	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem"
-				"for Quad UART(TL16CP754C)\n");
+		pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
 		return;
 	}
 
@@ -104,8 +106,8 @@
 
 	if (gpio_request_one(debug_board_detect, GPIOF_IN,
 			     "Zoom debug board detect") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
-		"board detect\n", debug_board_detect);
+		pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
+		       debug_board_detect);
 		return 0;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom-display.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom-display.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom-display.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom-display.c	2012-12-10 22:30:57.000000000 -0500
@@ -14,10 +14,12 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
 #include <linux/spi/spi.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
 #include <mach/board-zoom.h>
 
+#include "common.h"
+
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom-peripherals.c linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom-peripherals.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/board-zoom-peripherals.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/board-zoom-peripherals.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,6 +19,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -34,6 +35,7 @@
 #include "common-board-devices.h"
 
 #define OMAP_ZOOM_WLAN_PMENA_GPIO	(101)
+#define ZOOM2_HEADSET_EXTMUTE_GPIO	(153)
 #define OMAP_ZOOM_WLAN_IRQ_GPIO		(162)
 
 #define LCD_PANEL_ENABLE_GPIO		(7 + OMAP_MAX_GPIO_LINES)
@@ -193,8 +195,7 @@
 };
 
 static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-	/* ZOOM ref clock is 26 MHz */
-	.board_ref_clock = 1,
+	.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -244,16 +245,7 @@
 	return ret;
 }
 
-/* EXTMUTE callback function */
-static void zoom2_set_hs_extmute(int mute)
-{
-	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
-}
-
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= zoom_twl_gpio_setup,
 };
 
@@ -279,9 +271,9 @@
 
 		codec_data->ramp_delay_value = 3;	/* 161 ms */
 		codec_data->hs_extmute = 1;
-		codec_data->set_hs_extmute = zoom2_set_hs_extmute;
+		codec_data->hs_extmute_gpio = ZOOM2_HEADSET_EXTMUTE_GPIO;
 	}
-	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
+	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c	2012-12-10 22:30:57.000000000 -0500
@@ -59,7 +59,7 @@
 	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 
 	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
-			     OMAP24XX_CM_IDLEST_VAL, clk->name);
+			     OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
 
 	/*
 	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c	2012-12-10 22:30:57.000000000 -0500
@@ -33,11 +33,11 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
@@ -68,14 +68,15 @@
 long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
 {
 	const struct prcm_config *ptr;
-	long highest_rate;
+	long highest_rate, sys_clk_rate;
 
 	highest_rate = -EINVAL;
+	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 		if (!(ptr->flags & cpu_mask))
 			continue;
-		if (ptr->xtal_speed != sclk->rate)
+		if (ptr->xtal_speed != sys_clk_rate)
 			continue;
 
 		highest_rate = ptr->mpu_speed;
@@ -94,12 +95,15 @@
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
+	long sys_clk_rate;
+
+	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
 
-		if (prcm->xtal_speed != sclk->rate)
+		if (prcm->xtal_speed != sys_clk_rate)
 			continue;
 
 		if (prcm->mpu_speed <= rate) {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt34xx_dpll3m2.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt34xx_dpll3m2.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt34xx_dpll3m2.c	2012-12-10 22:30:57.000000000 -0500
@@ -56,6 +56,7 @@
 	struct omap_sdrc_params *sdrc_cs0;
 	struct omap_sdrc_params *sdrc_cs1;
 	int ret;
+	unsigned long clkrate;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -64,11 +65,12 @@
 	if (validrate != rate)
 		return -EINVAL;
 
-	sdrcrate = sdrc_ick_p->rate;
-	if (rate > clk->rate)
-		sdrcrate <<= ((rate / clk->rate) >> 1);
+	sdrcrate = __clk_get_rate(sdrc_ick_p);
+	clkrate = __clk_get_rate(clk);
+	if (rate > clkrate)
+		sdrcrate <<= ((rate / clkrate) >> 1);
 	else
-		sdrcrate >>= ((clk->rate / rate) >> 1);
+		sdrcrate >>= ((clkrate / rate) >> 1);
 
 	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
 	if (ret)
@@ -82,7 +84,7 @@
 	/*
 	 * XXX This only needs to be done when the CPU frequency changes
 	 */
-	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+	_mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
 	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
 	c += 1;  /* for safety */
 	c *= SDRC_MPURATE_LOOPS;
@@ -90,28 +92,26 @@
 	if (c == 0)
 		c = 1;
 
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		 validrate);
-	pr_debug("clock: SDRC CS0 timing params used:"
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
+		 clkrate, validrate);
+	pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
 		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
 	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: "
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+		pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+			 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+			 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 
 	if (sdrc_cs1)
 		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
+				  new_div, unlock_dll, c, rate > clkrate,
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
 				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 	else
 		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
+				  new_div, unlock_dll, c, rate > clkrate,
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  0, 0, 0, 0);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt_clksel.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt_clksel.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt_clksel.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt_clksel.c	2012-12-10 22:30:57.000000000 -0500
@@ -71,8 +71,8 @@
 
 	if (!clks->parent) {
 		/* This indicates a data problem */
-		WARN(1, "clock: Could not find parent clock %s in clksel array "
-		     "of clock %s\n", src_clk->name, clk->name);
+		WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
+		     __clk_get_name(clk), __clk_get_name(src_clk));
 		return NULL;
 	}
 
@@ -126,8 +126,9 @@
 
 	if (max_div == 0) {
 		/* This indicates an error in the clksel data */
-		WARN(1, "clock: Could not find divisor for clock %s parent %s"
-		     "\n", clk->name, src_clk->parent->name);
+		WARN(1, "clock: %s: could not find divisor for parent %s\n",
+		     __clk_get_name(clk),
+		     __clk_get_name(__clk_get_parent(src_clk)));
 		return 0;
 	}
 
@@ -176,8 +177,10 @@
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
+	struct clk *parent;
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	parent = __clk_get_parent(clk);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return 0;
 
@@ -191,8 +194,8 @@
 
 	if (!clkr->div) {
 		/* This indicates a data error */
-		WARN(1, "clock: Could not find fieldval %d for clock %s parent "
-		     "%s\n", field_val, clk->name, clk->parent->name);
+		WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
+		     __clk_get_name(clk), field_val, __clk_get_name(parent));
 		return 0;
 	}
 
@@ -213,11 +216,13 @@
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
+	struct clk *parent;
 
 	/* should never happen */
 	WARN_ON(div == 0);
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	parent = __clk_get_parent(clk);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return ~0;
 
@@ -230,8 +235,8 @@
 	}
 
 	if (!clkr->div) {
-		pr_err("clock: Could not find divisor %d for clock %s parent "
-		       "%s\n", div, clk->name, clk->parent->name);
+		pr_err("clock: %s: could not find divisor %d for parent %s\n",
+		       __clk_get_name(clk), div, __clk_get_name(parent));
 		return ~0;
 	}
 
@@ -281,16 +286,23 @@
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
+	struct clk *parent;
+	unsigned long parent_rate;
+	const char *clk_name;
+
+	parent = __clk_get_parent(clk);
+	parent_rate = __clk_get_rate(parent);
+	clk_name = __clk_get_name(clk);
 
 	if (!clk->clksel || !clk->clksel_mask)
 		return ~0;
 
 	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk->name, target_rate);
+		 clk_name, target_rate);
 
 	*new_div = 1;
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return ~0;
 
@@ -300,30 +312,29 @@
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			pr_err("clock: clksel_rate table not sorted "
-			       "for clock %s", clk->name);
+			pr_err("clock: %s: clksel_rate table not sorted\n",
+			       clk_name);
 
 		last_div = clkr->div;
 
-		test_rate = clk->parent->rate / clkr->div;
+		test_rate = parent_rate / clkr->div;
 
 		if (test_rate <= target_rate)
 			break; /* found it */
 	}
 
 	if (!clkr->div) {
-		pr_err("clock: Could not find divisor for target "
-		       "rate %ld for clock %s parent %s\n", target_rate,
-		       clk->name, clk->parent->name);
+		pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
+		       clk_name, target_rate, __clk_get_name(parent));
 		return ~0;
 	}
 
 	*new_div = clkr->div;
 
 	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (clk->parent->rate / clkr->div));
+		 (parent_rate / clkr->div));
 
-	return clk->parent->rate / clkr->div;
+	return parent_rate / clkr->div;
 }
 
 /*
@@ -345,10 +356,15 @@
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 	u32 r, found = 0;
+	struct clk *parent;
+	const char *clk_name;
 
 	if (!clk->clksel || !clk->clksel_mask)
 		return;
 
+	parent = __clk_get_parent(clk);
+	clk_name = __clk_get_name(clk);
+
 	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
 	r >>= __ffs(clk->clksel_mask);
 
@@ -358,14 +374,15 @@
 				continue;
 
 			if (clkr->val == r) {
-				if (clk->parent != clks->parent) {
-					pr_debug("clock: inited %s parent "
-						 "to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
+				if (parent != clks->parent) {
+					pr_debug("clock: %s: inited parent to %s (was %s)\n",
+						 clk_name,
+						 __clk_get_name(clks->parent),
+						 ((parent) ?
+						  __clk_get_name(parent) :
+						 "NULL"));
 					clk_reparent(clk, clks->parent);
-				};
+				}
 				found = 1;
 			}
 		}
@@ -373,7 +390,7 @@
 
 	/* This indicates a data error */
 	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
-	     clk->name, r);
+	     clk_name, r);
 
 	return;
 }
@@ -391,15 +408,17 @@
 {
 	unsigned long rate;
 	u32 div = 0;
+	struct clk *parent;
 
 	div = _read_divisor(clk);
 	if (div == 0)
-		return clk->rate;
+		return __clk_get_rate(clk);
 
-	rate = clk->parent->rate / div;
+	parent = __clk_get_parent(clk);
+	rate = __clk_get_rate(parent) / div;
 
-	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
-		 rate, div);
+	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n",
+		 __clk_get_name(clk), rate, div);
 
 	return rate;
 }
@@ -454,9 +473,10 @@
 
 	_write_clksel_reg(clk, field_val);
 
-	clk->rate = clk->parent->rate / new_div;
+	clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div;
 
-	pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
+	pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk),
+		 __clk_get_rate(clk));
 
 	return 0;
 }
@@ -498,13 +518,15 @@
 	clk_reparent(clk, new_parent);
 
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
-	clk->rate = new_parent->rate;
+	clk->rate = __clk_get_rate(new_parent);
 
 	if (parent_div > 0)
-		clk->rate /= parent_div;
+		__clk_get_rate(clk) /= parent_div;
 
 	pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
-		 clk->name, clk->parent->name, clk->rate);
+		 __clk_get_name(clk),
+		 __clk_get_name(__clk_get_parent(clk)),
+		 __clk_get_rate(clk));
 
 	return 0;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt_dpll.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt_dpll.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clkt_dpll.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clkt_dpll.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,8 +22,8 @@
 #include <asm/div64.h>
 
 #include <plat/clock.h>
-#include <plat/cpu.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
@@ -87,7 +87,7 @@
 	dd = clk->dpll_data;
 
 	/* DPLL divider must result in a valid jitter correction val */
-	fint = clk->parent->rate / n;
+	fint = __clk_get_rate(__clk_get_parent(clk)) / n;
 
 	if (cpu_is_omap24xx()) {
 		/* Should not be called for OMAP2, so warn if it is called */
@@ -105,13 +105,13 @@
 	}
 
 	if (fint < fint_min) {
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "lowering max_divider\n", n);
+		pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+			 n);
 		dd->max_divider = n;
 		ret = DPLL_FINT_UNDERFLOW;
 	} else if (fint > fint_max) {
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "boosting min_divider\n", n);
+		pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+			 n);
 		dd->min_divider = n;
 		ret = DPLL_FINT_INVALID;
 	} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
@@ -211,7 +211,7 @@
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
@@ -252,16 +252,16 @@
 	if (cpu_is_omap24xx()) {
 		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
+			return __clk_get_rate(dd->clk_bypass);
 	} else if (cpu_is_omap34xx()) {
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap44xx()) {
+			return __clk_get_rate(dd->clk_bypass);
+	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			return dd->clk_bypass->rate;
+			return __clk_get_rate(dd->clk_bypass);
 	}
 
 	v = __raw_readl(dd->mult_div1_reg);
@@ -270,7 +270,7 @@
 	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+	dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -296,16 +296,20 @@
 	unsigned long scaled_rt_rp;
 	unsigned long new_rate = 0;
 	struct dpll_data *dd;
+	unsigned long ref_rate;
+	const char *clk_name;
 
 	if (!clk || !clk->dpll_data)
 		return ~0;
 
 	dd = clk->dpll_data;
 
+	ref_rate = __clk_get_rate(dd->clk_ref);
+	clk_name = __clk_get_name(clk);
 	pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
-		 clk->name, target_rate);
+		 clk_name, target_rate);
 
-	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+	scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
 	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
 
 	dd->last_rounded_rate = 0;
@@ -332,14 +336,14 @@
 			break;
 
 		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    dd->clk_ref->rate);
+				    ref_rate);
 
 		/* m can't be set low enough for this n - try with a larger n */
 		if (r == DPLL_MULT_UNDERFLOW)
 			continue;
 
 		pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
-			 clk->name, m, n, new_rate);
+			 clk_name, m, n, new_rate);
 
 		if (target_rate == new_rate) {
 			dd->last_rounded_m = m;
@@ -350,8 +354,8 @@
 	}
 
 	if (target_rate != new_rate) {
-		pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
-			 target_rate);
+		pr_debug("clock: %s: cannot round to rate %ld\n",
+			 clk_name, target_rate);
 		return ~0;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2420_data.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2420_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2420_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2420_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,9 +18,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
@@ -1804,6 +1804,7 @@
 	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_242X),
+	CLK(NULL,	"dss_ick",		&dss_ick,	CK_242X),
 	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_242X),
 	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_242X),
 	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_242X),
@@ -1843,12 +1844,16 @@
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_242X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_242X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_242X),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_242X),
 	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_242X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_242X),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp2_ick,	CK_242X),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_242X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_242X),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_242X),
 	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_242X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_242X),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_242X),
 	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_242X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_242X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_242X),
@@ -1859,12 +1864,15 @@
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_242X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_242X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_242X),
+	CLK(NULL,	"mpu_wdt_ick",		&mpu_wdt_ick,	CK_242X),
 	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_242X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_242X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_242X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_242X),
 	CLK("omap24xxcam", "fck",	&cam_fck,	CK_242X),
+	CLK(NULL,	"cam_fck",	&cam_fck,	CK_242X),
 	CLK("omap24xxcam", "ick",	&cam_ick,	CK_242X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_242X),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_242X),
 	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_242X),
 	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_242X),
@@ -1873,16 +1881,22 @@
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_242X),
 	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_242X),
 	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK(NULL,	"mmc_ick",	&mmc_ick,	CK_242X),
 	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"mmc_fck",	&mmc_fck,	CK_242X),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_242X),
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_242X),
 	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
 	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_242X),
 	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_242X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_242X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_242X),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_242X),
 	CLK(NULL,	"i2c1_fck",	&i2c1_fck,	CK_242X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_242X),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_242X),
 	CLK(NULL,	"i2c2_fck",	&i2c2_fck,	CK_242X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
@@ -1892,14 +1906,18 @@
 	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
 	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_242X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
+	CLK(NULL,	"rng_ick",		&rng_ick,	CK_242X),
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
-	CLK(NULL,	"timer_32k_ck",	&func_32k_ck,	CK_243X),
-	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
-	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"timer_32k_ck",	&func_32k_ck,	CK_242X),
+	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_242X),
+	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_242X),
+	CLK(NULL,	"cpufreq_ck",	&virt_prcm_set,	CK_242X),
 };
 
 /*
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2430.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2430.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2430.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2430.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2430_data.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2430_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2430_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2430_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,9 +17,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
@@ -1856,6 +1856,7 @@
 	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X),
 	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X),
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
+	CLK("twl",	"fck",		&osc_ck,	CK_243X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
@@ -1887,6 +1888,7 @@
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_243X),
+	CLK(NULL,	"dss_ick",		&dss_ick,	CK_243X),
 	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_243X),
 	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X),
 	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X),
@@ -1926,20 +1928,28 @@
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_243X),
 	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_243X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp2_ick,	CK_243X),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_243X),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK(NULL,	"mcbsp3_ick",	&mcbsp3_ick,	CK_243X),
 	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_243X),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK(NULL,	"mcbsp4_ick",	&mcbsp4_ick,	CK_243X),
 	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_243X),
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK(NULL,	"mcbsp5_ick",	&mcbsp5_ick,	CK_243X),
 	CLK(NULL,	"mcbsp5_fck",	&mcbsp5_fck,	CK_243X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_243X),
 	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_243X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_243X),
 	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_243X),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK(NULL,	"mcspi3_ick",	&mcspi3_ick,	CK_243X),
 	CLK(NULL,	"mcspi3_fck",	&mcspi3_fck,	CK_243X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X),
@@ -1950,13 +1960,16 @@
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X),
+	CLK(NULL,	"mpu_wdt_ick",	&mpu_wdt_ick,	CK_243X),
 	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_243X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
 	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X),
+	CLK(NULL,	"cam_fck",	&cam_fck,	CK_243X),
 	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_243X),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X),
 	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X),
 	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X),
@@ -1965,10 +1978,14 @@
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X),
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_243X),
 	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_243X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_243X),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_243X),
 	CLK(NULL,	"i2chs1_fck",	&i2chs1_fck,	CK_243X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_243X),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_243X),
 	CLK(NULL,	"i2chs2_fck",	&i2chs2_fck,	CK_243X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X),
@@ -1977,22 +1994,29 @@
 	CLK(NULL,	"des_ick",	&des_ick,	CK_243X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_243X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X),
+	CLK(NULL,	"rng_ick",	&rng_ick,	CK_243X),
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_243X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
 	CLK("musb-omap2430",	"ick",	&usbhs_ick,	CK_243X),
+	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK(NULL,	"mmchs1_ick",	&mmchs1_ick,	CK_243X),
 	CLK(NULL,	"mmchs1_fck",	&mmchs1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK(NULL,	"mmchs2_ick",	&mmchs2_ick,	CK_243X),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_243X),
 	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
 	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK(NULL,	"mmchsdb1_fck",		&mmchsdb1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
+	CLK(NULL,	"mmchsdb2_fck",		&mmchsdb2_fck,	CK_243X),
 	CLK(NULL,	"timer_32k_ck",  &func_32k_ck,   CK_243X),
 	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"cpufreq_ck",	&virt_prcm_set,	CK_243X),
 };
 
 /*
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2xxx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2xxx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock2xxx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock2xxx.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,9 +22,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock33xx_data.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock33xx_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock33xx_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock33xx_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <plat/clkdev_omap.h>
-#include <plat/am33xx.h>
 
+#include "am33xx.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"
@@ -1013,6 +1013,7 @@
 	CLK(NULL,	"dpll_core_m5_ck",	&dpll_core_m5_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_core_m6_ck",	&dpll_core_m6_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_mpu_ck",		&dpll_mpu_ck,	CK_AM33XX),
+	CLK("cpu0",	NULL,			&dpll_mpu_ck,		CK_AM33XX),
 	CLK(NULL,	"dpll_mpu_m2_ck",	&dpll_mpu_m2_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_ddr_ck",		&dpll_ddr_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_ddr_m2_ck",	&dpll_ddr_m2_ck,	CK_AM33XX),
@@ -1027,11 +1028,15 @@
 	CLK(NULL,	"cefuse_fck",		&cefuse_fck,	CK_AM33XX),
 	CLK(NULL,	"clkdiv32k_ick",	&clkdiv32k_ick,	CK_AM33XX),
 	CLK(NULL,	"dcan0_fck",		&dcan0_fck,	CK_AM33XX),
+	CLK("481cc000.d_can",	NULL,		&dcan0_fck,	CK_AM33XX),
 	CLK(NULL,	"dcan1_fck",		&dcan1_fck,	CK_AM33XX),
+	CLK("481d0000.d_can",	NULL,		&dcan1_fck,	CK_AM33XX),
 	CLK(NULL,	"debugss_ick",		&debugss_ick,	CK_AM33XX),
 	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk,	CK_AM33XX),
 	CLK("davinci-mcasp.0",  NULL,           &mcasp0_fck,    CK_AM33XX),
 	CLK("davinci-mcasp.1",  NULL,           &mcasp1_fck,    CK_AM33XX),
+	CLK(NULL,	"mcasp0_fck",		&mcasp0_fck,	CK_AM33XX),
+	CLK(NULL,	"mcasp1_fck",		&mcasp1_fck,	CK_AM33XX),
 	CLK("NULL",	"mmc2_fck",		&mmc2_fck,	CK_AM33XX),
 	CLK(NULL,	"mmu_fck",		&mmu_fck,	CK_AM33XX),
 	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck,	CK_AM33XX),
@@ -1068,6 +1073,8 @@
 	CLK(NULL,	"gfx_fck_div_ck",	&gfx_fck_div_ck,	CK_AM33XX),
 	CLK(NULL,	"sysclkout_pre_ck",	&sysclkout_pre_ck,	CK_AM33XX),
 	CLK(NULL,	"clkout2_ck",		&clkout2_ck,	CK_AM33XX),
+	CLK(NULL,	"timer_32k_ck",		&clkdiv32k_ick,	CK_AM33XX),
+	CLK(NULL,	"timer_sys_ck",		&sys_clkin_ck,	CK_AM33XX),
 };
 
 int __init am33xx_clk_init(void)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock3xxx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock3xxx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock3xxx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock3xxx.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock3xxx.h"
 #include "prm2xxx_3xxx.h"
@@ -49,8 +49,7 @@
 	 * on DPLL4.
 	 */
 	if (omap_rev() == OMAP3430_REV_ES1_0) {
-		pr_err("clock: DPLL4 cannot change rate due to "
-		       "silicon 'Limitation 2.5' on 3430ES1.\n");
+		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
 		return -EINVAL;
 	}
 
@@ -64,15 +63,15 @@
 
 	dpll5_clk = clk_get(NULL, "dpll5_ck");
 	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_enable(dpll5_clk);
+	clk_prepare_enable(dpll5_clk);
 
 	/* Program dpll5_m2_clk divider for no division */
 	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_enable(dpll5_m2_clk);
+	clk_prepare_enable(dpll5_m2_clk);
 	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
 
-	clk_disable(dpll5_m2_clk);
-	clk_disable(dpll5_clk);
+	clk_disable_unprepare(dpll5_m2_clk);
+	clk_disable_unprepare(dpll5_clk);
 	return;
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock3xxx_data.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock3xxx_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock3xxx_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock3xxx_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,9 +21,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock3xxx.h"
@@ -3215,7 +3215,6 @@
  * clkdev
  */
 
-/* XXX At some point we should rename this file to clock3xxx_data.c */
 static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"apb_pclk",	&dummy_apb_pclk,	CK_3XXX),
 	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
@@ -3226,6 +3225,7 @@
 	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck,	CK_3XXX),
 	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
 	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
+	CLK("twl",	"fck",		&osc_sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
@@ -3242,11 +3242,13 @@
 	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
 	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_3XXX),
 	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
+	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_3XXX),
 	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_3XXX),
 	CLK(NULL,	"omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
 	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
+	CLK(NULL,	"omap_96m_alwon_fck_3630", &omap_96m_alwon_fck_3630, CK_36XX),
 	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_3XXX),
 	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_3XXX),
 	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_3XXX),
@@ -3262,6 +3264,7 @@
 	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
 	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_3XXX),
 	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
+	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
@@ -3271,6 +3274,7 @@
 	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_3XXX),
 	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_3XXX),
 	CLK(NULL,	"arm_fck",	&arm_fck,	CK_3XXX),
+	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_34XX | CK_36XX),
@@ -3294,6 +3298,7 @@
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_tll",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"mmchs3_fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_3XXX),
@@ -3314,6 +3319,7 @@
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_3XXX),
 	CLK("omap_hdq.0",	"fck",	&hdq_fck,	CK_3XXX),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_3XXX),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
@@ -3321,6 +3327,8 @@
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_3XXX),
 	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
 	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_3XXX),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_3XXX),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
@@ -3328,28 +3336,42 @@
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_tll",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap_hsmmc.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"mmchs3_ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
 	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
 	CLK("omap-sham",	"ick",	&sha12_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"des2_ick",	&des2_ick,	CK_34XX | CK_36XX),
 	CLK("omap_hsmmc.1",	"ick",	&mmchs2_ick,	CK_3XXX),
 	CLK("omap_hsmmc.0",	"ick",	&mmchs1_ick,	CK_3XXX),
+	CLK(NULL,	"mmchs2_ick",	&mmchs2_ick,	CK_3XXX),
+	CLK(NULL,	"mmchs1_ick",	&mmchs1_ick,	CK_3XXX),
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_34XX | CK_36XX),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_3XXX),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_3XXX),
 	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_3XXX),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_3XXX),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_3XXX),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi4_ick",	&mcspi4_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi3_ick",	&mcspi3_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_3XXX),
 	CLK("omap_i2c.3", "ick",	&i2c3_ick,	CK_3XXX),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_3XXX),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_3XXX),
+	CLK(NULL,	"i2c3_ick",	&i2c3_ick,	CK_3XXX),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_3XXX),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_3XXX),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_3XXX),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_3XXX),
 	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_3XXX),
 	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_3XXX),
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_3XXX),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp5_ick",	&mcbsp5_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_3XXX),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_3XXX),
@@ -3368,7 +3390,9 @@
 	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_3XXX),
 	CLK(NULL,	"dss2_alwon_fck",	&dss2_alwon_fck, CK_3XXX),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"dss_ick",		&dss_ick_3430es1,	CK_3430ES1),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"dss_ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
@@ -3384,6 +3408,8 @@
 	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
 	CLK("usbhs_omap",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
 	CLK("usbhs_omap",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_tll",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_tll",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
@@ -3393,6 +3419,7 @@
 	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2PLUS | CK_36XX),
 	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_3XXX),
+	CLK(NULL,	"wdt2_ick",	&wdt2_ick,	CK_3XXX),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_3XXX),
 	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_3XXX),
 	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
@@ -3438,9 +3465,13 @@
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_3XXX),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_3XXX),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp4_ick",	&mcbsp2_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp3_ick",	&mcbsp3_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp4_ick,	CK_3XXX),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_3XXX),
 	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_3XXX),
 	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_3XXX),
+	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
 	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
 	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_3XXX),
 	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_3XXX),
@@ -3456,8 +3487,12 @@
 	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
 	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
 	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
+	CLK(NULL,	"emac_ick",	&emac_ick,	CK_AM35XX),
+	CLK(NULL,	"emac_fck",	&emac_fck,	CK_AM35XX),
 	CLK("davinci_emac.0",	NULL,	&emac_ick,	CK_AM35XX),
 	CLK("davinci_mdio.0",	NULL,	&emac_fck,	CK_AM35XX),
+	CLK(NULL,	"vpfe_ick",	&emac_ick,	CK_AM35XX),
+	CLK(NULL,	"vpfe_fck",	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
 	CLK(NULL,	"hsotgusb_ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
@@ -3466,6 +3501,7 @@
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
 	CLK(NULL,	"timer_32k_ck",	&omap_32k_fck,  CK_3XXX),
 	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_3XXX),
+	CLK(NULL,	"cpufreq_ck",	&dpll1_ck,	CK_3XXX),
 };
 
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock44xx_data.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock44xx_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock44xx_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock44xx_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,9 +28,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock44xx.h"
@@ -3156,6 +3156,7 @@
 	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk,	CK_443X),
 	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk,	CK_443X),
 	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk,	CK_443X),
+	CLK(NULL,	"dss_fck",			&dss_fck,	CK_443X),
 	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
@@ -3212,6 +3213,7 @@
 	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
 	CLK(NULL,	"ocp2scp_usb_phy_ick",		&ocp2scp_usb_phy_ick,	CK_443X),
 	CLK(NULL,	"ocp_wp_noc_ick",		&ocp_wp_noc_ick,	CK_443X),
+	CLK(NULL,	"rng_ick",			&rng_ick,	CK_443X),
 	CLK("omap_rng",	"ick",				&rng_ick,	CK_443X),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
 	CLK(NULL,	"sl2if_ick",			&sl2if_ick,	CK_443X),
@@ -3243,6 +3245,7 @@
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
@@ -3253,15 +3256,19 @@
 	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
+	CLK(NULL,	"usb_otg_hs_ick",		&usb_otg_hs_ick,	CK_443X),
 	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
 	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
+	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("usbhs_tll",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
@@ -3287,7 +3294,7 @@
 	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck,	CK_443X),
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
-	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
+	CLK("omap-gpmc",	"fck",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.1",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.3",	"ick",				&dummy_ck,	CK_443X),
@@ -3312,8 +3319,10 @@
 	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
 	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck,	CK_443X),
+	CLK("usbhs_tll",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
 	CLK(NULL,	"timer_32k_ck",	&sys_32k_ck,	CK_443X),
+	/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
 	CLK("omap_timer.1",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("omap_timer.2",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("omap_timer.3",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
@@ -3325,6 +3334,18 @@
 	CLK("omap_timer.6",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK("omap_timer.7",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK("omap_timer.8",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4a318000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48032000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48034000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48036000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("49038000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clock.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clock.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clock.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clock.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,14 +22,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <trace/events/power.h>
 
 #include <asm/cpu.h>
+
 #include <plat/clock.h>
-#include "clockdomain.h"
-#include <plat/cpu.h>
 #include <plat/prcm.h>
 
+#include <trace/events/power.h>
+
+#include "soc.h"
+#include "clockdomain.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
@@ -76,7 +78,7 @@
 	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
 
 	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
-			     clk->name);
+			     __clk_get_name(clk));
 }
 
 /* Public functions */
@@ -92,18 +94,21 @@
 void omap2_init_clk_clkdm(struct clk *clk)
 {
 	struct clockdomain *clkdm;
+	const char *clk_name;
 
 	if (!clk->clkdm_name)
 		return;
 
+	clk_name = __clk_get_name(clk);
+
 	clkdm = clkdm_lookup(clk->clkdm_name);
 	if (clkdm) {
 		pr_debug("clock: associated clk %s to clkdm %s\n",
-			 clk->name, clk->clkdm_name);
+			 clk_name, clk->clkdm_name);
 		clk->clkdm = clkdm;
 	} else {
-		pr_debug("clock: could not associate clk %s to "
-			 "clkdm %s\n", clk->name, clk->clkdm_name);
+		pr_debug("clock: could not associate clk %s to clkdm %s\n",
+			 clk_name, clk->clkdm_name);
 	}
 }
 
@@ -226,8 +231,7 @@
 		 * 'Independent' here refers to a clock which is not
 		 * controlled by its parent.
 		 */
-		printk(KERN_ERR "clock: clk_disable called on independent "
-		       "clock %s which has no enable_reg\n", clk->name);
+		pr_err("clock: clk_disable called on independent clock %s which has no enable_reg\n", clk->name);
 		return;
 	}
 
@@ -270,8 +274,7 @@
 void omap2_clk_disable(struct clk *clk)
 {
 	if (clk->usecount == 0) {
-		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
-		     "already 0?", clk->name);
+		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount already 0?", clk->name);
 		return;
 	}
 
@@ -332,8 +335,8 @@
 	if (clkdm_control && clk->clkdm) {
 		ret = clkdm_clk_enable(clk->clkdm, clk);
 		if (ret) {
-			WARN(1, "clock: %s: could not enable clockdomain %s: "
-			     "%d\n", clk->name, clk->clkdm->name, ret);
+			WARN(1, "clock: %s: could not enable clockdomain %s: %d\n",
+			     clk->name, clk->clkdm->name, ret);
 			goto oce_err2;
 		}
 	}
@@ -501,10 +504,8 @@
 
 	hfclkin_rate = clk_get_rate(hfclkin_ck);
 
-	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
-		"%ld.%01ld/%ld/%ld MHz\n",
-		(hfclkin_rate / 1000000),
-		((hfclkin_rate / 100000) % 10),
+	pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
 		(clk_get_rate(core_ck) / 1000000),
 		(clk_get_rate(mpu_ck) / 1000000));
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c	2012-12-10 22:30:57.000000000 -0500
@@ -162,6 +162,19 @@
 						clkdm->clktrctrl_mask);
 }
 
+static int omap3_clkdm_sleep(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+	return 0;
+}
+
+static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+	return 0;
+}
 
 static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
 {
@@ -209,20 +222,6 @@
 	return 0;
 }
 
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
 static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
 {
 	if (atomic_read(&clkdm->usecount) > 0)
@@ -248,6 +247,17 @@
 	if (!clkdm->clktrctrl_mask)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+	    (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+		omap3_clkdm_wakeup(clkdm);
+		return 0;
+	}
+
 	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
 
@@ -271,6 +281,17 @@
 	if (!clkdm->clktrctrl_mask)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		_enable_hwsup(clkdm);
+		return 0;
+	}
+
 	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain44xx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain44xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain44xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain44xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -113,6 +113,17 @@
 	if (!clkdm->prcm_partition)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		omap4_clkdm_allow_idle(clkdm);
+		return 0;
+	}
+
 	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain.c	2012-12-10 22:30:57.000000000 -0500
@@ -174,9 +174,8 @@
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
-			 "clkdm %s\n", autodep->clkdm.ptr->name,
-			 clkdm->name);
+		pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
+			 clkdm->name, autodep->clkdm.ptr->name);
 
 		clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
 		clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
@@ -205,9 +204,8 @@
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
-			 "clkdm %s\n", autodep->clkdm.ptr->name,
-			 clkdm->name);
+		pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
+			 clkdm->name, autodep->clkdm.ptr->name);
 
 		clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
 		clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
@@ -469,14 +467,14 @@
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
-		pr_debug("clockdomain: hardware will wake up %s when %s wakes "
-			 "up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
 	}
@@ -510,14 +508,14 @@
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
-		pr_debug("clockdomain: hardware will no longer wake up %s "
-			 "after %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
 	}
@@ -555,8 +553,8 @@
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
@@ -613,15 +611,14 @@
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
-		pr_debug("clockdomain: will prevent %s from sleeping if %s "
-			 "is active\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
 	}
@@ -657,16 +654,14 @@
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
-		pr_debug("clockdomain: will no longer prevent %s from "
-			 "sleeping if %s is active\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
 	}
@@ -706,9 +701,8 @@
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
@@ -755,8 +749,8 @@
 		return -EINVAL;
 
 	if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
-		pr_debug("clockdomain: %s does not support forcing "
-			 "sleep via software\n", clkdm->name);
+		pr_debug("clockdomain: %s does not support forcing sleep via software\n",
+			 clkdm->name);
 		return -EINVAL;
 	}
 
@@ -790,8 +784,8 @@
 		return -EINVAL;
 
 	if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
-		pr_debug("clockdomain: %s does not support forcing "
-			 "wakeup via software\n", clkdm->name);
+		pr_debug("clockdomain: %s does not support forcing wakeup via software\n",
+			 clkdm->name);
 		return -EINVAL;
 	}
 
@@ -826,8 +820,8 @@
 		return;
 
 	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
-		pr_debug("clock: automatic idle transitions cannot be enabled "
-			 "on clockdomain %s\n", clkdm->name);
+		pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
+			 clkdm->name);
 		return;
 	}
 
@@ -861,8 +855,8 @@
 		return;
 
 	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
-		pr_debug("clockdomain: automatic idle transitions cannot be "
-			 "disabled on %s\n", clkdm->name);
+		pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
+			 clkdm->name);
 		return;
 	}
 
@@ -905,6 +899,23 @@
 	return ret;
 }
 
+/**
+ * clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use?
+ * @clkdm: struct clockdomain *
+ *
+ * Returns true if clockdomain @clkdm has the
+ * CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is
+ * null.  More information is available in the documentation for the
+ * CLKDM_MISSING_IDLE_REPORTING macro.
+ */
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
+{
+	if (!clkdm)
+		return false;
+
+	return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
+}
+
 /* Clockdomain-to-clock/hwmod framework interface code */
 
 static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
@@ -914,20 +925,23 @@
 	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
 		return -EINVAL;
 
+	spin_lock_irqsave(&clkdm->lock, flags);
+
 	/*
 	 * For arch's with no autodeps, clkcm_clk_enable
 	 * should be called for every clock instance or hwmod that is
 	 * enabled, so the clkdm can be force woken up.
 	 */
-	if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+	if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) {
+		spin_unlock_irqrestore(&clkdm->lock, flags);
 		return 0;
+	}
 
-	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_enable(clkdm);
 	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
-	pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
+	pr_debug("clockdomain: %s: enabled\n", clkdm->name);
 
 	return 0;
 }
@@ -939,20 +953,24 @@
 	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
 		return -EINVAL;
 
+	spin_lock_irqsave(&clkdm->lock, flags);
+
 	if (atomic_read(&clkdm->usecount) == 0) {
+		spin_unlock_irqrestore(&clkdm->lock, flags);
 		WARN_ON(1); /* underflow */
 		return -ERANGE;
 	}
 
-	if (atomic_dec_return(&clkdm->usecount) > 0)
+	if (atomic_dec_return(&clkdm->usecount) > 0) {
+		spin_unlock_irqrestore(&clkdm->lock, flags);
 		return 0;
+	}
 
-	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_disable(clkdm);
 	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
-	pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
+	pr_debug("clockdomain: %s: disabled\n", clkdm->name);
 
 	return 0;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain.h linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomain.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomain.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,9 +1,7 @@
 /*
- * arch/arm/plat-omap/include/mach/clockdomain.h
- *
  * OMAP2/3 clockdomain framework functions
  *
- * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008, 2012 Texas Instruments, Inc.
  * Copyright (C) 2008-2011 Nokia Corporation
  *
  * Paul Walmsley
@@ -34,6 +32,20 @@
  * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
  *     active whenever the MPU is active.  True for interconnects and
  *     the WKUP clockdomains.
+ * CLKDM_MISSING_IDLE_REPORTING: The idle status of the IP blocks and
+ *     clocks inside this clockdomain are not taken into account by
+ *     the PRCM when determining whether the clockdomain is idle.
+ *     Without this flag, if the clockdomain is set to
+ *     hardware-supervised idle mode, the PRCM may transition the
+ *     enclosing powerdomain to a low power state, even when devices
+ *     inside the clockdomain and powerdomain are in use.  (An example
+ *     of such a clockdomain is the EMU clockdomain on OMAP3/4.)  If
+ *     this flag is set, and the clockdomain does not support the
+ *     force-sleep mode, then the HW_AUTO mode will be used to put the
+ *     clockdomain to sleep.  Similarly, if the clockdomain supports
+ *     the force-wakeup mode, then it will be used whenever a clock or
+ *     IP block inside the clockdomain is active, rather than the
+ *     HW_AUTO mode.
  */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
 #define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
@@ -41,6 +53,7 @@
 #define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
+#define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
@@ -187,6 +200,7 @@
 void clkdm_allow_idle(struct clockdomain *clkdm);
 void clkdm_deny_idle(struct clockdomain *clkdm);
 bool clkdm_in_hwsup(struct clockdomain *clkdm);
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
 
 int clkdm_wakeup(struct clockdomain *clkdm);
 int clkdm_sleep(struct clockdomain *clkdm);
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomains3xxx_data.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomains3xxx_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomains3xxx_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomains3xxx_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -387,14 +387,11 @@
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 };
 
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
 static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
 	.pwrdm		= { .name = "emu_pwrdm" },
-	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
+	.flags		= (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP |
+			   CLKDM_MISSING_IDLE_REPORTING),
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 };
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomains44xx_data.c linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomains44xx_data.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/clockdomains44xx_data.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/clockdomains44xx_data.c	2012-12-10 22:30:57.000000000 -0500
@@ -359,7 +359,7 @@
 	.clkdm_offs	  = OMAP4430_CM2_CAM_CAM_CDOFFS,
 	.wkdep_srcs	  = iss_wkup_sleep_deps,
 	.sleepdep_srcs	  = iss_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l3_dss_44xx_clkdm = {
@@ -390,7 +390,8 @@
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.cm_inst	  = OMAP4430_PRM_EMU_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
-	.flags		  = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
+	.flags		  = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP |
+			     CLKDM_MISSING_IDLE_REPORTING),
 };
 
 static struct clockdomain l3_dma_44xx_clkdm = {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.c	2012-12-10 22:30:57.000000000 -0500
@@ -18,8 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm.h"
@@ -36,7 +35,7 @@
 #define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
 
 static const u8 cm_idlest_offs[] = {
-	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
 };
 
 u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/cm2xxx_3xxx.h	2012-12-10 22:30:57.000000000 -0500
@@ -71,6 +71,7 @@
 #define OMAP24XX_CM_FCLKEN2				0x0004
 #define OMAP24XX_CM_ICLKEN4				0x001c
 #define OMAP24XX_CM_AUTOIDLE4				0x003c
+#define OMAP24XX_CM_IDLEST4				0x002c
 
 #define OMAP2430_CM_IDLEST3				0x0028
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/cm-regbits-33xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/cm-regbits-33xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/cm-regbits-33xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/cm-regbits-33xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -25,263 +25,328 @@
  * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
  */
 #define AM33XX_AUTO_DPLL_MODE_SHIFT			0
+#define AM33XX_AUTO_DPLL_MODE_WIDTH			3
 #define AM33XX_AUTO_DPLL_MODE_MASK			(0x7 << 0)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT		14
+#define AM33XX_CLKACTIVITY_ADC_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_ADC_FCLK_MASK		(1 << 16)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT		11
+#define AM33XX_CLKACTIVITY_CAN_CLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CAN_CLK_MASK			(1 << 11)
 
 /* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK		(1 << 4)
 
 /* Used by CM_PER_CPSW_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK	(1 << 4)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK	(1 << 4)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT	5
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK		(1 << 5)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT		6
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK		(1 << 6)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT		6
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK		(1 << 6)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT	9
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK	(1 << 9)
 
 /* Used by CM_L3_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK		(1 << 2)
 
 /* Used by CM_L3_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT		4
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_WIDTH		1
 #define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK		(1 << 4)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK		(1 << 2)
 
 /* Used by CM_GFX_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_GFX_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GFX_FCLK_MASK		(1 << 9)
 
 /* Used by CM_GFX_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK		(1 << 8)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK		(1 << 8)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT		19
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK		(1 << 19)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT		20
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK		(1 << 20)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT		21
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK		(1 << 21)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT		22
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK		(1 << 22)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT		26
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK		(1 << 26)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT		18
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT		11
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT		24
+#define AM33XX_CLKACTIVITY_I2C_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_I2C_FCLK_MASK		(1 << 24)
 
 /* Used by CM_PER_PRUSS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT		5
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK		(1 << 5)
 
 /* Used by CM_PER_PRUSS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK		(1 << 4)
 
 /* Used by CM_PER_PRUSS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT	6
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK		(1 << 6)
 
 /* Used by CM_PER_L3S_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L3S_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L3S_GCLK_MASK		(1 << 3)
 
 /* Used by CM_L3_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK		(1 << 3)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_L3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L3_GCLK_MASK			(1 << 4)
 
 /* Used by CM_PER_L4FW_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK		(1 << 8)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK		(1 << 3)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK		(1 << 8)
 
 /* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
 #define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK		(1 << 8)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT	8
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_RTC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK		(1 << 8)
 
 /* Used by CM_L4_WKUP_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT	2
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK	(1 << 2)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK		(1 << 2)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT		17
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK		(1 << 17)
 
 /* Used by CM_PER_LCDC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK	(1 << 4)
 
 /* Used by CM_PER_LCDC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT	5
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK	(1 << 5)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT		7
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK		(1 << 7)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_MMC_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_MMC_FCLK_MASK		(1 << 3)
 
 /* Used by CM_MPU_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_MPU_CLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_MPU_CLK_MASK			(1 << 2)
 
 /* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK		(1 << 4)
 
 /* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT		5
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK		(1 << 5)
 
 /* Used by CM_RTC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK		(1 << 9)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT		25
+#define AM33XX_CLKACTIVITY_SPI_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_SPI_GCLK_MASK		(1 << 25)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK		(1 << 3)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT		10
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK		(1 << 10)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT		13
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK		(1 << 13)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT		14
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK		(1 << 14)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT		15
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK		(1 << 15)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT		16
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK		(1 << 16)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT		27
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK		(1 << 27)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT		28
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK		(1 << 28)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT		13
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK		(1 << 13)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT		12
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT		10
+#define AM33XX_CLKACTIVITY_UART_GFCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_UART_GFCLK_MASK		(1 << 10)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK		(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK		(1 << 4)
 
 /* Used by CLKSEL_GFX_FCLK */
 #define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT		0
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_WIDTH		1
 #define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK			(1 << 0)
 
 /* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2DIV_SHIFT				3
-#define AM33XX_CLKOUT2DIV_MASK				(0x05 << 3)
+#define AM33XX_CLKOUT2DIV_WIDTH				3
+#define AM33XX_CLKOUT2DIV_MASK				(0x7 << 3)
 
 /* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2EN_SHIFT				7
+#define AM33XX_CLKOUT2EN_WIDTH				1
 #define AM33XX_CLKOUT2EN_MASK				(1 << 7)
 
 /* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2SOURCE_SHIFT			0
-#define AM33XX_CLKOUT2SOURCE_MASK			(0x02 << 0)
+#define AM33XX_CLKOUT2SOURCE_WIDTH			3
+#define AM33XX_CLKOUT2SOURCE_MASK			(0x7 << 0)
 
 /*
  * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
@@ -289,6 +354,7 @@
  * CLKSEL_TIMER7_CLK
  */
 #define AM33XX_CLKSEL_SHIFT				0
+#define AM33XX_CLKSEL_WIDTH				1
 #define AM33XX_CLKSEL_MASK				(0x01 << 0)
 
 /*
@@ -296,17 +362,21 @@
  * CM_CPTS_RFT_CLKSEL
  */
 #define AM33XX_CLKSEL_0_0_SHIFT				0
+#define AM33XX_CLKSEL_0_0_WIDTH				1
 #define AM33XX_CLKSEL_0_0_MASK				(1 << 0)
 
 #define AM33XX_CLKSEL_0_1_SHIFT				0
+#define AM33XX_CLKSEL_0_1_WIDTH				2
 #define AM33XX_CLKSEL_0_1_MASK				(3 << 0)
 
 /* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
 #define AM33XX_CLKSEL_0_2_SHIFT				0
+#define AM33XX_CLKSEL_0_2_WIDTH				3
 #define AM33XX_CLKSEL_0_2_MASK				(7 << 0)
 
 /* Used by CLKSEL_GFX_FCLK */
 #define AM33XX_CLKSEL_GFX_FCLK_SHIFT			1
+#define AM33XX_CLKSEL_GFX_FCLK_WIDTH			1
 #define AM33XX_CLKSEL_GFX_FCLK_MASK			(1 << 1)
 
 /*
@@ -318,6 +388,7 @@
  * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
  */
 #define AM33XX_CLKTRCTRL_SHIFT				0
+#define AM33XX_CLKTRCTRL_WIDTH				2
 #define AM33XX_CLKTRCTRL_MASK				(0x3 << 0)
 
 /*
@@ -326,34 +397,42 @@
  * CM_SSC_DELTAMSTEP_DPLL_PER
  */
 #define AM33XX_DELTAMSTEP_SHIFT				0
-#define AM33XX_DELTAMSTEP_MASK				(0x19 << 0)
+#define AM33XX_DELTAMSTEP_WIDTH				20
+#define AM33XX_DELTAMSTEP_MASK				(0xfffff << 0)
 
 /* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
 #define AM33XX_DPLL_BYP_CLKSEL_SHIFT			23
+#define AM33XX_DPLL_BYP_CLKSEL_WIDTH			1
 #define AM33XX_DPLL_BYP_CLKSEL_MASK			(1 << 23)
 
 /* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT		8
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH		1
 #define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT		12
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_WIDTH		1
 #define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK			(1 << 12)
 
 /* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
 #define AM33XX_DPLL_CLKOUT_DIV_SHIFT			0
+#define AM33XX_DPLL_CLKOUT_DIV_WIDTH			5
 #define AM33XX_DPLL_CLKOUT_DIV_MASK			(0x1f << 0)
 
 /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
 #define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT		0
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK			(0x06 << 0)
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_WIDTH		7
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
 
 /* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT		5
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_WIDTH		1
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK		(1 << 5)
 
 /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT	7
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_WIDTH	1
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK		(1 << 7)
 
 /*
@@ -361,6 +440,7 @@
  * CM_DIV_M2_DPLL_PER
  */
 #define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT		8
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_WIDTH		1
 #define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK		(1 << 8)
 
 /*
@@ -368,19 +448,22 @@
  * CM_CLKSEL_DPLL_MPU
  */
 #define AM33XX_DPLL_DIV_SHIFT				0
+#define AM33XX_DPLL_DIV_WIDTH				7
 #define AM33XX_DPLL_DIV_MASK				(0x7f << 0)
 
 #define AM33XX_DPLL_PER_DIV_MASK			(0xff << 0)
 
 /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
 #define AM33XX_DPLL_DIV_0_7_SHIFT			0
-#define AM33XX_DPLL_DIV_0_7_MASK			(0x07 << 0)
+#define AM33XX_DPLL_DIV_0_7_WIDTH			8
+#define AM33XX_DPLL_DIV_0_7_MASK			(0xff << 0)
 
 /*
  * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
  * CM_CLKMODE_DPLL_MPU
  */
 #define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT			8
+#define AM33XX_DPLL_DRIFTGUARD_EN_WIDTH			1
 #define AM33XX_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
 
 /*
@@ -388,6 +471,7 @@
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_EN_SHIFT				0
+#define AM33XX_DPLL_EN_WIDTH				3
 #define AM33XX_DPLL_EN_MASK				(0x7 << 0)
 
 /*
@@ -395,6 +479,7 @@
  * CM_CLKMODE_DPLL_MPU
  */
 #define AM33XX_DPLL_LPMODE_EN_SHIFT			10
+#define AM33XX_DPLL_LPMODE_EN_WIDTH			1
 #define AM33XX_DPLL_LPMODE_EN_MASK			(1 << 10)
 
 /*
@@ -402,10 +487,12 @@
  * CM_CLKSEL_DPLL_MPU
  */
 #define AM33XX_DPLL_MULT_SHIFT				8
+#define AM33XX_DPLL_MULT_WIDTH				11
 #define AM33XX_DPLL_MULT_MASK				(0x7ff << 8)
 
 /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
 #define AM33XX_DPLL_MULT_PERIPH_SHIFT			8
+#define AM33XX_DPLL_MULT_PERIPH_WIDTH			12
 #define AM33XX_DPLL_MULT_PERIPH_MASK			(0xfff << 8)
 
 /*
@@ -413,17 +500,20 @@
  * CM_CLKMODE_DPLL_MPU
  */
 #define AM33XX_DPLL_REGM4XEN_SHIFT			11
+#define AM33XX_DPLL_REGM4XEN_WIDTH			1
 #define AM33XX_DPLL_REGM4XEN_MASK			(1 << 11)
 
 /* Used by CM_CLKSEL_DPLL_PERIPH */
 #define AM33XX_DPLL_SD_DIV_SHIFT			24
-#define AM33XX_DPLL_SD_DIV_MASK				(24, 31)
+#define AM33XX_DPLL_SD_DIV_WIDTH			8
+#define AM33XX_DPLL_SD_DIV_MASK				(0xff << 24)
 
 /*
  * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_SSC_ACK_SHIFT			13
+#define AM33XX_DPLL_SSC_ACK_WIDTH			1
 #define AM33XX_DPLL_SSC_ACK_MASK			(1 << 13)
 
 /*
@@ -431,6 +521,7 @@
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT		14
+#define AM33XX_DPLL_SSC_DOWNSPREAD_WIDTH		1
 #define AM33XX_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
 
 /*
@@ -438,54 +529,67 @@
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_SSC_EN_SHIFT			12
+#define AM33XX_DPLL_SSC_EN_WIDTH			1
 #define AM33XX_DPLL_SSC_EN_MASK				(1 << 12)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT		0
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH		5
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK		(0x1f << 0)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH	1
 #define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK		(1 << 12)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT		0
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH		5
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK		(0x1f << 0)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH	1
 #define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK		(1 << 12)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT		0
-#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK		(0x04 << 0)
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH		5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK		(0x1f << 0)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH	1
 #define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK		(1 << 12)
 
 /*
@@ -522,11 +626,12 @@
  * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
  */
 #define AM33XX_IDLEST_SHIFT				16
+#define AM33XX_IDLEST_WIDTH				2
 #define AM33XX_IDLEST_MASK				(0x3 << 16)
-#define AM33XX_IDLEST_VAL				0x3
 
 /* Used by CM_MAC_CLKSEL */
 #define AM33XX_MII_CLK_SEL_SHIFT			2
+#define AM33XX_MII_CLK_SEL_WIDTH			1
 #define AM33XX_MII_CLK_SEL_MASK				(1 << 2)
 
 /*
@@ -535,7 +640,8 @@
  * CM_SSC_MODFREQDIV_DPLL_PER
  */
 #define AM33XX_MODFREQDIV_EXPONENT_SHIFT		8
-#define AM33XX_MODFREQDIV_EXPONENT_MASK			(0x10 << 8)
+#define AM33XX_MODFREQDIV_EXPONENT_WIDTH		3
+#define AM33XX_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
 
 /*
  * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
@@ -543,7 +649,8 @@
  * CM_SSC_MODFREQDIV_DPLL_PER
  */
 #define AM33XX_MODFREQDIV_MANTISSA_SHIFT		0
-#define AM33XX_MODFREQDIV_MANTISSA_MASK			(0x06 << 0)
+#define AM33XX_MODFREQDIV_MANTISSA_WIDTH		7
+#define AM33XX_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
 
 /*
  * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
@@ -580,42 +687,52 @@
  * CM_CEFUSE_CEFUSE_CLKCTRL
  */
 #define AM33XX_MODULEMODE_SHIFT				0
+#define AM33XX_MODULEMODE_WIDTH				2
 #define AM33XX_MODULEMODE_MASK				(0x3 << 0)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT			30
+#define AM33XX_OPTCLK_DEBUG_CLKA_WIDTH			1
 #define AM33XX_OPTCLK_DEBUG_CLKA_MASK			(1 << 30)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT		19
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK			(1 << 19)
 
 /* Used by CM_WKUP_GPIO0_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO1_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO2_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO3_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO4_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO5_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO6_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK		(1 << 18)
 
 /*
@@ -627,25 +744,30 @@
  * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
  */
 #define AM33XX_STBYST_SHIFT				18
+#define AM33XX_STBYST_WIDTH				1
 #define AM33XX_STBYST_MASK				(1 << 18)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKDIVSEL_SHIFT			27
-#define AM33XX_STM_PMD_CLKDIVSEL_MASK			(0x29 << 27)
+#define AM33XX_STM_PMD_CLKDIVSEL_WIDTH			3
+#define AM33XX_STM_PMD_CLKDIVSEL_MASK			(0x7 << 27)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKSEL_SHIFT			22
-#define AM33XX_STM_PMD_CLKSEL_MASK			(0x23 << 22)
+#define AM33XX_STM_PMD_CLKSEL_WIDTH			2
+#define AM33XX_STM_PMD_CLKSEL_MASK			(0x3 << 22)
 
 /*
  * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
  * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
  */
 #define AM33XX_ST_DPLL_CLK_SHIFT			0
+#define AM33XX_ST_DPLL_CLK_WIDTH			1
 #define AM33XX_ST_DPLL_CLK_MASK				(1 << 0)
 
 /* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT			8
+#define AM33XX_ST_DPLL_CLKDCOLDO_WIDTH			1
 #define AM33XX_ST_DPLL_CLKDCOLDO_MASK			(1 << 8)
 
 /*
@@ -653,18 +775,22 @@
  * CM_DIV_M2_DPLL_PER
  */
 #define AM33XX_ST_DPLL_CLKOUT_SHIFT			9
+#define AM33XX_ST_DPLL_CLKOUT_WIDTH			1
 #define AM33XX_ST_DPLL_CLKOUT_MASK			(1 << 9)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_WIDTH		1
 #define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK		(1 << 9)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_WIDTH		1
 #define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK		(1 << 9)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_WIDTH		1
 #define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK		(1 << 9)
 
 /*
@@ -672,16 +798,20 @@
  * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
  */
 #define AM33XX_ST_MN_BYPASS_SHIFT			8
+#define AM33XX_ST_MN_BYPASS_WIDTH			1
 #define AM33XX_ST_MN_BYPASS_MASK			(1 << 8)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT			24
-#define AM33XX_TRC_PMD_CLKDIVSEL_MASK			(0x26 << 24)
+#define AM33XX_TRC_PMD_CLKDIVSEL_WIDTH			3
+#define AM33XX_TRC_PMD_CLKDIVSEL_MASK			(0x7 << 24)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKSEL_SHIFT			20
-#define AM33XX_TRC_PMD_CLKSEL_MASK			(0x21 << 20)
+#define AM33XX_TRC_PMD_CLKSEL_WIDTH			2
+#define AM33XX_TRC_PMD_CLKSEL_MASK			(0x3 << 20)
 
 /* Used by CONTROL_SEC_CLK_CTRL */
+#define AM33XX_TIMER0_CLKSEL_WIDTH			2
 #define AM33XX_TIMER0_CLKSEL_MASK			(0x3 << 4)
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -218,6 +218,8 @@
 #define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_ST_OMAPCTRL_SHIFT			6
 #define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
+#define OMAP3430_ST_SAD2D_SHIFT				3
+#define OMAP3430_ST_SAD2D_MASK				(1 << 3)
 #define OMAP3430_ST_SDMA_SHIFT				2
 #define OMAP3430_ST_SDMA_MASK				(1 << 2)
 #define OMAP3430_ST_SDRC_SHIFT				1
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/cm-regbits-44xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/cm-regbits-44xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/cm-regbits-44xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/cm-regbits-44xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -1,7 +1,7 @@
 /*
  * OMAP44xx Clock Management register bits
  *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
  * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
@@ -24,6 +24,7 @@
 
 /* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
 #define OMAP4430_ABE_DYNDEP_SHIFT				3
+#define OMAP4430_ABE_DYNDEP_WIDTH				0x1
 #define OMAP4430_ABE_DYNDEP_MASK				(1 << 3)
 
 /*
@@ -31,14 +32,17 @@
  * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_ABE_STATDEP_SHIFT				3
+#define OMAP4430_ABE_STATDEP_WIDTH				0x1
 #define OMAP4430_ABE_STATDEP_MASK				(1 << 3)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_ALWONCORE_DYNDEP_SHIFT				16
+#define OMAP4430_ALWONCORE_DYNDEP_WIDTH				0x1
 #define OMAP4430_ALWONCORE_DYNDEP_MASK				(1 << 16)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
 #define OMAP4430_ALWONCORE_STATDEP_SHIFT			16
+#define OMAP4430_ALWONCORE_STATDEP_WIDTH			0x1
 #define OMAP4430_ALWONCORE_STATDEP_MASK				(1 << 16)
 
 /*
@@ -47,294 +51,367 @@
  * CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB
  */
 #define OMAP4430_AUTO_DPLL_MODE_SHIFT				0
+#define OMAP4430_AUTO_DPLL_MODE_WIDTH				0x3
 #define OMAP4430_AUTO_DPLL_MODE_MASK				(0x7 << 0)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_CEFUSE_DYNDEP_SHIFT				17
+#define OMAP4430_CEFUSE_DYNDEP_WIDTH				0x1
 #define OMAP4430_CEFUSE_DYNDEP_MASK				(1 << 17)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
 #define OMAP4430_CEFUSE_STATDEP_SHIFT				17
+#define OMAP4430_CEFUSE_STATDEP_WIDTH				0x1
 #define OMAP4430_CEFUSE_STATDEP_MASK				(1 << 17)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		13
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			(1 << 13)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		(1 << 12)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			(1 << 9)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			11
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			(1 << 11)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			(1 << 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			(1 << 11)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		(1 << 12)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		13
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		(1 << 13)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		(1 << 9)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_EMU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		(1 << 9)
 
 /* Used by CM_L4CFG_CLKSTCTRL */
 #define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT		9
+#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_WIDTH		0x1
 #define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		(1 << 9)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_DLL_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			11
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			(1 << 11)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			12
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			(1 << 12)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			13
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			(1 << 13)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			14
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			(1 << 14)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		(1 << 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			(1 << 9)
 
 /* Used by CM_DUCATI_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			(1 << 8)
 
 /* Used by CM_EMU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			(1 << 8)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		15
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		(1 << 15)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		(1 << 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		20
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		(1 << 20)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		26
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			(1 << 26)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		21
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		(1 << 21)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		27
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			(1 << 27)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		13
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		(1 << 13)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		28
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		(1 << 28)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		29
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		(1 << 29)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		16
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		(1 << 16)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		17
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		(1 << 17)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		18
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		(1 << 18)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		19
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		(1 << 19)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			(1 << 8)
 
 /* Used by CM_IVAHD_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK		(1 << 10)
 
 /* Used by CM_L3_1_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3_2_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			(1 << 8)
 
 /* Used by CM_SDMA_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			(1 << 8)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			(1 << 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			(1 << 8)
 
 /* Used by CM_GFX_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3INSTR_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		(1 << 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			(1 << 8)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_L4CFG_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			(1 << 12)
 
 /* Used by CM_MPU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			(1 << 8)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		16
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		(1 << 16)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		17
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			(1 << 17)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		18
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			(1 << 18)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		19
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			(1 << 19)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		25
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		(1 << 25)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		20
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		(1 << 20)
 
 /* Used by CM_L4PER_CLKSTCTRL */
@@ -343,94 +420,114 @@
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		22
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		(1 << 22)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		24
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			(1 << 24)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			(1 << 10)
 
 /* Used by CM_GFX_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		(1 << 11)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			(1 << 10)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_SYS_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			(1 << 8)
 
 /* Used by CM_TESLA_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		(1 << 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		22
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			(1 << 22)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		23
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			(1 << 23)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		24
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			(1 << 24)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK		(1 << 10)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT			14
+#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK			(1 << 14)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		15
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		(1 << 15)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		30
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			(1 << 30)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		25
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		(1 << 25)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT		13
+#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_WIDTH		0x1
 #define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK			(1 << 13)
 
 /*
  * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
  * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
  * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
  * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL
  */
 #define OMAP4430_CLKSEL_SHIFT					24
+#define OMAP4430_CLKSEL_WIDTH					0x1
 #define OMAP4430_CLKSEL_MASK					(1 << 24)
 
 /*
@@ -438,50 +535,62 @@
  * CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL
  */
 #define OMAP4430_CLKSEL_0_0_SHIFT				0
+#define OMAP4430_CLKSEL_0_0_WIDTH				0x1
 #define OMAP4430_CLKSEL_0_0_MASK				(1 << 0)
 
 /* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
 #define OMAP4430_CLKSEL_0_1_SHIFT				0
+#define OMAP4430_CLKSEL_0_1_WIDTH				0x2
 #define OMAP4430_CLKSEL_0_1_MASK				(0x3 << 0)
 
 /* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
 #define OMAP4430_CLKSEL_24_25_SHIFT				24
+#define OMAP4430_CLKSEL_24_25_WIDTH				0x2
 #define OMAP4430_CLKSEL_24_25_MASK				(0x3 << 24)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_CLKSEL_60M_SHIFT				24
+#define OMAP4430_CLKSEL_60M_WIDTH				0x1
 #define OMAP4430_CLKSEL_60M_MASK				(1 << 24)
 
 /* Used by CM_MPU_MPU_CLKCTRL */
 #define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT			25
+#define OMAP4460_CLKSEL_ABE_DIV_MODE_WIDTH			0x1
 #define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK			(1 << 25)
 
 /* Used by CM1_ABE_AESS_CLKCTRL */
 #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
+#define OMAP4430_CLKSEL_AESS_FCLK_WIDTH				0x1
 #define OMAP4430_CLKSEL_AESS_FCLK_MASK				(1 << 24)
 
 /* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_CORE_SHIFT				0
+#define OMAP4430_CLKSEL_CORE_WIDTH				0x1
 #define OMAP4430_CLKSEL_CORE_MASK				(1 << 0)
 
 /* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_CLKSEL_CORE_1_1_SHIFT				1
+#define OMAP4430_CLKSEL_CORE_1_1_WIDTH				0x1
 #define OMAP4430_CLKSEL_CORE_1_1_MASK				(1 << 1)
 
 /* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_CLKSEL_DIV_SHIFT				24
+#define OMAP4430_CLKSEL_DIV_WIDTH				0x1
 #define OMAP4430_CLKSEL_DIV_MASK				(1 << 24)
 
 /* Used by CM_MPU_MPU_CLKCTRL */
 #define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT			24
+#define OMAP4460_CLKSEL_EMIF_DIV_MODE_WIDTH			0x1
 #define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK			(1 << 24)
 
 /* Used by CM_CAM_FDIF_CLKCTRL */
 #define OMAP4430_CLKSEL_FCLK_SHIFT				24
+#define OMAP4430_CLKSEL_FCLK_WIDTH				0x2
 #define OMAP4430_CLKSEL_FCLK_MASK				(0x3 << 24)
 
 /* Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH			0x1
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			(1 << 25)
 
 /*
@@ -490,34 +599,42 @@
  * CM1_ABE_MCBSP3_CLKCTRL
  */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	26
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_WIDTH	0x2
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	(0x3 << 26)
 
 /* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L3_SHIFT				4
+#define OMAP4430_CLKSEL_L3_WIDTH				0x1
 #define OMAP4430_CLKSEL_L3_MASK					(1 << 4)
 
 /* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				2
+#define OMAP4430_CLKSEL_L3_SHADOW_WIDTH				0x1
 #define OMAP4430_CLKSEL_L3_SHADOW_MASK				(1 << 2)
 
 /* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L4_SHIFT				8
+#define OMAP4430_CLKSEL_L4_WIDTH				0x1
 #define OMAP4430_CLKSEL_L4_MASK					(1 << 8)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_CLKSEL_OPP_SHIFT				0
+#define OMAP4430_CLKSEL_OPP_WIDTH				0x2
 #define OMAP4430_CLKSEL_OPP_MASK				(0x3 << 0)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
+#define OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH			0x3
 #define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			(0x7 << 27)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			24
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_WIDTH			0x3
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			(0x7 << 24)
 
 /* Used by CM_GFX_GFX_CLKCTRL */
 #define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				24
+#define OMAP4430_CLKSEL_SGX_FCLK_WIDTH				0x1
 #define OMAP4430_CLKSEL_SGX_FCLK_MASK				(1 << 24)
 
 /*
@@ -525,18 +642,22 @@
  * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
  */
 #define OMAP4430_CLKSEL_SOURCE_SHIFT				24
+#define OMAP4430_CLKSEL_SOURCE_WIDTH				0x2
 #define OMAP4430_CLKSEL_SOURCE_MASK				(0x3 << 24)
 
 /* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			24
+#define OMAP4430_CLKSEL_SOURCE_24_24_WIDTH			0x1
 #define OMAP4430_CLKSEL_SOURCE_24_24_MASK			(1 << 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
+#define OMAP4430_CLKSEL_UTMI_P1_WIDTH				0x1
 #define OMAP4430_CLKSEL_UTMI_P1_MASK				(1 << 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
+#define OMAP4430_CLKSEL_UTMI_P2_WIDTH				0x1
 #define OMAP4430_CLKSEL_UTMI_P2_MASK				(1 << 25)
 
 /*
@@ -549,30 +670,37 @@
  * CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL
  */
 #define OMAP4430_CLKTRCTRL_SHIFT				0
+#define OMAP4430_CLKTRCTRL_WIDTH				0x2
 #define OMAP4430_CLKTRCTRL_MASK					(0x3 << 0)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			0
+#define OMAP4430_CORE_DPLL_EMU_DIV_WIDTH			0x7
 #define OMAP4430_CORE_DPLL_EMU_DIV_MASK				(0x7f << 0)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			8
+#define OMAP4430_CORE_DPLL_EMU_MULT_WIDTH			0xb
 #define OMAP4430_CORE_DPLL_EMU_MULT_MASK			(0x7ff << 8)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_CUSTOM_SHIFT					6
+#define OMAP4430_CUSTOM_WIDTH					0x2
 #define OMAP4430_CUSTOM_MASK					(0x3 << 6)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_D2D_DYNDEP_SHIFT				18
+#define OMAP4430_D2D_DYNDEP_WIDTH				0x1
 #define OMAP4430_D2D_DYNDEP_MASK				(1 << 18)
 
 /* Used by CM_MPU_STATICDEP */
 #define OMAP4430_D2D_STATDEP_SHIFT				18
+#define OMAP4430_D2D_STATDEP_WIDTH				0x1
 #define OMAP4430_D2D_STATDEP_MASK				(1 << 18)
 
 /* Used by CM_CLKSEL_DPLL_MPU */
 #define OMAP4460_DCC_COUNT_MAX_SHIFT				24
+#define OMAP4460_DCC_COUNT_MAX_WIDTH				0x8
 #define OMAP4460_DCC_COUNT_MAX_MASK				(0xff << 24)
 
 /* Used by CM_CLKSEL_DPLL_MPU */
@@ -586,22 +714,27 @@
  * CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB
  */
 #define OMAP4430_DELTAMSTEP_SHIFT				0
+#define OMAP4430_DELTAMSTEP_WIDTH				0x14
 #define OMAP4430_DELTAMSTEP_MASK				(0xfffff << 0)
 
 /* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
 #define OMAP4460_DELTAMSTEP_0_20_SHIFT				0
+#define OMAP4460_DELTAMSTEP_0_20_WIDTH				0x15
 #define OMAP4460_DELTAMSTEP_0_20_MASK				(0x1fffff << 0)
 
 /* Used by CM_DLL_CTRL */
 #define OMAP4430_DLL_OVERRIDE_SHIFT				0
+#define OMAP4430_DLL_OVERRIDE_WIDTH				0x1
 #define OMAP4430_DLL_OVERRIDE_MASK				(1 << 0)
 
 /* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DLL_OVERRIDE_2_2_SHIFT				2
+#define OMAP4430_DLL_OVERRIDE_2_2_WIDTH				0x1
 #define OMAP4430_DLL_OVERRIDE_2_2_MASK				(1 << 2)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DLL_RESET_SHIFT				3
+#define OMAP4430_DLL_RESET_WIDTH				0x1
 #define OMAP4430_DLL_RESET_MASK					(1 << 3)
 
 /*
@@ -610,30 +743,37 @@
  * CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB
  */
 #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
+#define OMAP4430_DPLL_BYP_CLKSEL_WIDTH				0x1
 #define OMAP4430_DPLL_BYP_CLKSEL_MASK				(1 << 23)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			8
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			(1 << 8)
 
 /* Used by CM_CLKSEL_DPLL_CORE */
 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			20
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			(1 << 20)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			0
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_WIDTH			0x5
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			(0x1f << 0)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			5
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			(1 << 5)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			(1 << 8)
 
 /* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			10
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			(1 << 10)
 
 /*
@@ -641,10 +781,12 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
+#define OMAP4430_DPLL_CLKOUT_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CLKOUT_DIV_MASK				(0x1f << 0)
 
 /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			0
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_WIDTH			0x7
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
 
 /*
@@ -652,10 +794,12 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			5
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			(1 << 5)
 
 /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		7
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_WIDTH		0x1
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		(1 << 7)
 
 /*
@@ -663,18 +807,22 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
  */
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			8
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			(1 << 8)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			8
+#define OMAP4430_DPLL_CORE_DPLL_EN_WIDTH			0x3
 #define OMAP4430_DPLL_CORE_DPLL_EN_MASK				(0x7 << 8)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				11
+#define OMAP4430_DPLL_CORE_M2_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CORE_M2_DIV_MASK				(0x1f << 11)
 
 /* Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				3
+#define OMAP4430_DPLL_CORE_M5_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CORE_M5_DIV_MASK				(0x1f << 3)
 
 /*
@@ -683,10 +831,12 @@
  * CM_CLKSEL_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_DIV_SHIFT					0
+#define OMAP4430_DPLL_DIV_WIDTH					0x7
 #define OMAP4430_DPLL_DIV_MASK					(0x7f << 0)
 
 /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_DIV_0_7_SHIFT				0
+#define OMAP4430_DPLL_DIV_0_7_WIDTH				0x8
 #define OMAP4430_DPLL_DIV_0_7_MASK				(0xff << 0)
 
 /*
@@ -694,10 +844,12 @@
  * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			8
+#define OMAP4430_DPLL_DRIFTGUARD_EN_WIDTH			0x1
 #define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
 
 /* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
 #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			3
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_WIDTH			0x1
 #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			(1 << 3)
 
 /*
@@ -706,6 +858,7 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_EN_SHIFT					0
+#define OMAP4430_DPLL_EN_WIDTH					0x3
 #define OMAP4430_DPLL_EN_MASK					(0x7 << 0)
 
 /*
@@ -714,6 +867,7 @@
  * CM_CLKMODE_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_LPMODE_EN_SHIFT				10
+#define OMAP4430_DPLL_LPMODE_EN_WIDTH				0x1
 #define OMAP4430_DPLL_LPMODE_EN_MASK				(1 << 10)
 
 /*
@@ -722,10 +876,12 @@
  * CM_CLKSEL_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_MULT_SHIFT				8
+#define OMAP4430_DPLL_MULT_WIDTH				0xb
 #define OMAP4430_DPLL_MULT_MASK					(0x7ff << 8)
 
 /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_MULT_USB_SHIFT				8
+#define OMAP4430_DPLL_MULT_USB_WIDTH				0xc
 #define OMAP4430_DPLL_MULT_USB_MASK				(0xfff << 8)
 
 /*
@@ -734,10 +890,12 @@
  * CM_CLKMODE_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_REGM4XEN_SHIFT				11
+#define OMAP4430_DPLL_REGM4XEN_WIDTH				0x1
 #define OMAP4430_DPLL_REGM4XEN_MASK				(1 << 11)
 
 /* Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_SD_DIV_SHIFT				24
+#define OMAP4430_DPLL_SD_DIV_WIDTH				0x8
 #define OMAP4430_DPLL_SD_DIV_MASK				(0xff << 24)
 
 /*
@@ -746,6 +904,7 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_ACK_SHIFT				13
+#define OMAP4430_DPLL_SSC_ACK_WIDTH				0x1
 #define OMAP4430_DPLL_SSC_ACK_MASK				(1 << 13)
 
 /*
@@ -754,6 +913,7 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			14
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_WIDTH			0x1
 #define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
 
 /*
@@ -762,42 +922,52 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_EN_SHIFT				12
+#define OMAP4430_DPLL_SSC_EN_WIDTH				0x1
 #define OMAP4430_DPLL_SSC_EN_MASK				(1 << 12)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
 #define OMAP4430_DSS_DYNDEP_SHIFT				8
+#define OMAP4430_DSS_DYNDEP_WIDTH				0x1
 #define OMAP4430_DSS_DYNDEP_MASK				(1 << 8)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DSS_STATDEP_SHIFT				8
+#define OMAP4430_DSS_STATDEP_WIDTH				0x1
 #define OMAP4430_DSS_STATDEP_MASK				(1 << 8)
 
 /* Used by CM_L3_2_DYNAMICDEP */
 #define OMAP4430_DUCATI_DYNDEP_SHIFT				0
+#define OMAP4430_DUCATI_DYNDEP_WIDTH				0x1
 #define OMAP4430_DUCATI_DYNDEP_MASK				(1 << 0)
 
 /* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DUCATI_STATDEP_SHIFT				0
+#define OMAP4430_DUCATI_STATDEP_WIDTH				0x1
 #define OMAP4430_DUCATI_STATDEP_MASK				(1 << 0)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_FREQ_UPDATE_SHIFT				0
+#define OMAP4430_FREQ_UPDATE_WIDTH				0x1
 #define OMAP4430_FREQ_UPDATE_MASK				(1 << 0)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_FUNC_SHIFT					16
+#define OMAP4430_FUNC_WIDTH					0xc
 #define OMAP4430_FUNC_MASK					(0xfff << 16)
 
 /* Used by CM_L3_2_DYNAMICDEP */
 #define OMAP4430_GFX_DYNDEP_SHIFT				10
+#define OMAP4430_GFX_DYNDEP_WIDTH				0x1
 #define OMAP4430_GFX_DYNDEP_MASK				(1 << 10)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_GFX_STATDEP_SHIFT				10
+#define OMAP4430_GFX_STATDEP_WIDTH				0x1
 #define OMAP4430_GFX_STATDEP_MASK				(1 << 10)
 
 /* Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				0
+#define OMAP4430_GPMC_FREQ_UPDATE_WIDTH				0x1
 #define OMAP4430_GPMC_FREQ_UPDATE_MASK				(1 << 0)
 
 /*
@@ -805,6 +975,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			(0x1f << 0)
 
 /*
@@ -812,6 +983,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
 
 /*
@@ -819,6 +991,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
 
 /*
@@ -826,6 +999,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			(1 << 12)
 
 /*
@@ -833,6 +1007,7 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			(0x1f << 0)
 
 /*
@@ -840,6 +1015,7 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
 
 /*
@@ -847,6 +1023,7 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
 
 /*
@@ -854,38 +1031,47 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			(1 << 12)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			(0x1f << 0)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			(1 << 12)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			(0x1f << 0)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			(1 << 12)
 
 /*
@@ -893,53 +1079,48 @@
  * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
  * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
  * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
+ * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
+ * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
  * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
  * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
  * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
  * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
  * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
  * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
+ * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
+ * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
  * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
  * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
  * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
+ * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
  */
 #define OMAP4430_IDLEST_SHIFT					16
+#define OMAP4430_IDLEST_WIDTH					0x2
 #define OMAP4430_IDLEST_MASK					(0x3 << 16)
 
 /* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_ISS_DYNDEP_SHIFT				9
+#define OMAP4430_ISS_DYNDEP_WIDTH				0x1
 #define OMAP4430_ISS_DYNDEP_MASK				(1 << 9)
 
 /*
@@ -947,10 +1128,12 @@
  * CM_TESLA_STATICDEP
  */
 #define OMAP4430_ISS_STATDEP_SHIFT				9
+#define OMAP4430_ISS_STATDEP_WIDTH				0x1
 #define OMAP4430_ISS_STATDEP_MASK				(1 << 9)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
 #define OMAP4430_IVAHD_DYNDEP_SHIFT				2
+#define OMAP4430_IVAHD_DYNDEP_WIDTH				0x1
 #define OMAP4430_IVAHD_DYNDEP_MASK				(1 << 2)
 
 /*
@@ -959,10 +1142,12 @@
  * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_IVAHD_STATDEP_SHIFT				2
+#define OMAP4430_IVAHD_STATDEP_WIDTH				0x1
 #define OMAP4430_IVAHD_STATDEP_MASK				(1 << 2)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
 #define OMAP4430_L3INIT_DYNDEP_SHIFT				7
+#define OMAP4430_L3INIT_DYNDEP_WIDTH				0x1
 #define OMAP4430_L3INIT_DYNDEP_MASK				(1 << 7)
 
 /*
@@ -970,6 +1155,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3INIT_STATDEP_SHIFT				7
+#define OMAP4430_L3INIT_STATDEP_WIDTH				0x1
 #define OMAP4430_L3INIT_STATDEP_MASK				(1 << 7)
 
 /*
@@ -977,6 +1163,7 @@
  * CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
 #define OMAP4430_L3_1_DYNDEP_SHIFT				5
+#define OMAP4430_L3_1_DYNDEP_WIDTH				0x1
 #define OMAP4430_L3_1_DYNDEP_MASK				(1 << 5)
 
 /*
@@ -986,6 +1173,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3_1_STATDEP_SHIFT				5
+#define OMAP4430_L3_1_STATDEP_WIDTH				0x1
 #define OMAP4430_L3_1_STATDEP_MASK				(1 << 5)
 
 /*
@@ -995,6 +1183,7 @@
  * CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP
  */
 #define OMAP4430_L3_2_DYNDEP_SHIFT				6
+#define OMAP4430_L3_2_DYNDEP_WIDTH				0x1
 #define OMAP4430_L3_2_DYNDEP_MASK				(1 << 6)
 
 /*
@@ -1004,10 +1193,12 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3_2_STATDEP_SHIFT				6
+#define OMAP4430_L3_2_STATDEP_WIDTH				0x1
 #define OMAP4430_L3_2_STATDEP_MASK				(1 << 6)
 
 /* Used by CM_L3_1_DYNAMICDEP */
 #define OMAP4430_L4CFG_DYNDEP_SHIFT				12
+#define OMAP4430_L4CFG_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4CFG_DYNDEP_MASK				(1 << 12)
 
 /*
@@ -1015,10 +1206,12 @@
  * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4CFG_STATDEP_SHIFT				12
+#define OMAP4430_L4CFG_STATDEP_WIDTH				0x1
 #define OMAP4430_L4CFG_STATDEP_MASK				(1 << 12)
 
 /* Used by CM_L3_2_DYNAMICDEP */
 #define OMAP4430_L4PER_DYNDEP_SHIFT				13
+#define OMAP4430_L4PER_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4PER_DYNDEP_MASK				(1 << 13)
 
 /*
@@ -1026,10 +1219,12 @@
  * CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4PER_STATDEP_SHIFT				13
+#define OMAP4430_L4PER_STATDEP_WIDTH				0x1
 #define OMAP4430_L4PER_STATDEP_MASK				(1 << 13)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
 #define OMAP4430_L4SEC_DYNDEP_SHIFT				14
+#define OMAP4430_L4SEC_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4SEC_DYNDEP_MASK				(1 << 14)
 
 /*
@@ -1037,10 +1232,12 @@
  * CM_SDMA_STATICDEP
  */
 #define OMAP4430_L4SEC_STATDEP_SHIFT				14
+#define OMAP4430_L4SEC_STATDEP_WIDTH				0x1
 #define OMAP4430_L4SEC_STATDEP_MASK				(1 << 14)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_L4WKUP_DYNDEP_SHIFT				15
+#define OMAP4430_L4WKUP_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4WKUP_DYNDEP_MASK				(1 << 15)
 
 /*
@@ -1048,6 +1245,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4WKUP_STATDEP_SHIFT				15
+#define OMAP4430_L4WKUP_STATDEP_WIDTH				0x1
 #define OMAP4430_L4WKUP_STATDEP_MASK				(1 << 15)
 
 /*
@@ -1055,6 +1253,7 @@
  * CM_MPU_DYNAMICDEP
  */
 #define OMAP4430_MEMIF_DYNDEP_SHIFT				4
+#define OMAP4430_MEMIF_DYNDEP_WIDTH				0x1
 #define OMAP4430_MEMIF_DYNDEP_MASK				(1 << 4)
 
 /*
@@ -1064,6 +1263,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_MEMIF_STATDEP_SHIFT				4
+#define OMAP4430_MEMIF_STATDEP_WIDTH				0x1
 #define OMAP4430_MEMIF_STATDEP_MASK				(1 << 4)
 
 /*
@@ -1073,6 +1273,7 @@
  * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
  */
 #define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			8
+#define OMAP4430_MODFREQDIV_EXPONENT_WIDTH			0x3
 #define OMAP4430_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
 
 /*
@@ -1082,6 +1283,7 @@
  * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
  */
 #define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			0
+#define OMAP4430_MODFREQDIV_MANTISSA_WIDTH			0x7
 #define OMAP4430_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
 
 /*
@@ -1089,69 +1291,68 @@
  * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
  * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
  * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
+ * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
+ * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
  * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
  * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
  * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
  * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
  * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
  * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
+ * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
+ * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
  * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
  * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
  * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
+ * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
  */
 #define OMAP4430_MODULEMODE_SHIFT				0
+#define OMAP4430_MODULEMODE_WIDTH				0x2
 #define OMAP4430_MODULEMODE_MASK				(0x3 << 0)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4460_MPU_DYNDEP_SHIFT				19
+#define OMAP4460_MPU_DYNDEP_WIDTH				0x1
 #define OMAP4460_MPU_DYNDEP_MASK				(1 << 19)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			(1 << 9)
 
 /* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
+#define OMAP4430_OPTFCLKEN_BGAP_32K_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			(1 << 8)
 
 /* Used by CM_ALWON_USBPHY_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				8
+#define OMAP4430_OPTFCLKEN_CLK32K_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_CLK32K_MASK				(1 << 8)
 
 /* Used by CM_CAM_ISS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_CTRLCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				(1 << 8)
 
 /*
@@ -1160,126 +1361,157 @@
  * CM_WKUP_GPIO1_CLKCTRL
  */
 #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_DBCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_DBCLK_MASK				(1 << 8)
 
 /* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_DLL_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				(1 << 8)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_DSSCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_DSSCLK_MASK				(1 << 8)
 
 /* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_FCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK_MASK				(1 << 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
+#define OMAP4430_OPTFCLKEN_FCLK0_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK0_MASK				(1 << 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
+#define OMAP4430_OPTFCLKEN_FCLK1_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK1_MASK				(1 << 9)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
+#define OMAP4430_OPTFCLKEN_FCLK2_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK2_MASK				(1 << 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			(1 << 15)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			(1 << 13)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			(1 << 14)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			(1 << 11)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			(1 << 12)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			(1 << 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
+#define OMAP4430_OPTFCLKEN_PHY_48M_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_PHY_48M_MASK				(1 << 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			(1 << 10)
 
 /* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		(1 << 11)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_SYS_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				(1 << 10)
 
 /* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT			8
+#define OMAP4460_OPTFCLKEN_TS_FCLK_WIDTH			0x1
 #define OMAP4460_OPTFCLKEN_TS_FCLK_MASK				(1 << 8)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
+#define OMAP4430_OPTFCLKEN_TV_CLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_TV_CLK_MASK				(1 << 11)
 
 /* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_XCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_XCLK_MASK				(1 << 8)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_OVERRIDE_ENABLE_SHIFT				19
+#define OMAP4430_OVERRIDE_ENABLE_WIDTH				0x1
 #define OMAP4430_OVERRIDE_ENABLE_MASK				(1 << 19)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_PAD_CLKS_GATE_SHIFT				8
+#define OMAP4430_PAD_CLKS_GATE_WIDTH				0x1
 #define OMAP4430_PAD_CLKS_GATE_MASK				(1 << 8)
 
 /* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
 #define OMAP4430_PERF_CURRENT_SHIFT				0
+#define OMAP4430_PERF_CURRENT_WIDTH				0x8
 #define OMAP4430_PERF_CURRENT_MASK				(0xff << 0)
 
 /*
@@ -1288,74 +1520,85 @@
  * CM_IVA_DVFS_PERF_TESLA
  */
 #define OMAP4430_PERF_REQ_SHIFT					0
+#define OMAP4430_PERF_REQ_WIDTH					0x8
 #define OMAP4430_PERF_REQ_MASK					(0xff << 0)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE1_COMPLETED_SHIFT				0
+#define OMAP4430_PHASE1_COMPLETED_WIDTH				0x1
 #define OMAP4430_PHASE1_COMPLETED_MASK				(1 << 0)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE2A_COMPLETED_SHIFT			1
+#define OMAP4430_PHASE2A_COMPLETED_WIDTH			0x1
 #define OMAP4430_PHASE2A_COMPLETED_MASK				(1 << 1)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE2B_COMPLETED_SHIFT			2
+#define OMAP4430_PHASE2B_COMPLETED_WIDTH			0x1
 #define OMAP4430_PHASE2B_COMPLETED_MASK				(1 << 2)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
+#define OMAP4430_PMD_STM_MUX_CTRL_WIDTH				0x2
 #define OMAP4430_PMD_STM_MUX_CTRL_MASK				(0x3 << 20)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
+#define OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH			0x2
 #define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			(0x3 << 22)
 
 /* Used by CM_DYN_DEP_PRESCAL */
 #define OMAP4430_PRESCAL_SHIFT					0
+#define OMAP4430_PRESCAL_WIDTH					0x6
 #define OMAP4430_PRESCAL_MASK					(0x3f << 0)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_R_RTL_SHIFT					11
+#define OMAP4430_R_RTL_WIDTH					0x5
 #define OMAP4430_R_RTL_MASK					(0x1f << 11)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_SAR_MODE_SHIFT					4
+#define OMAP4430_SAR_MODE_WIDTH					0x1
 #define OMAP4430_SAR_MODE_MASK					(1 << 4)
 
 /* Used by CM_SCALE_FCLK */
 #define OMAP4430_SCALE_FCLK_SHIFT				0
+#define OMAP4430_SCALE_FCLK_WIDTH				0x1
 #define OMAP4430_SCALE_FCLK_MASK				(1 << 0)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_SCHEME_SHIFT					30
+#define OMAP4430_SCHEME_WIDTH					0x2
 #define OMAP4430_SCHEME_MASK					(0x3 << 30)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_SDMA_DYNDEP_SHIFT				11
+#define OMAP4430_SDMA_DYNDEP_WIDTH				0x1
 #define OMAP4430_SDMA_DYNDEP_MASK				(1 << 11)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_SDMA_STATDEP_SHIFT				11
+#define OMAP4430_SDMA_STATDEP_WIDTH				0x1
 #define OMAP4430_SDMA_STATDEP_MASK				(1 << 11)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
+#define OMAP4430_SLIMBUS_CLK_GATE_WIDTH				0x1
 #define OMAP4430_SLIMBUS_CLK_GATE_MASK				(1 << 10)
 
 /*
  * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_DUCATI_DUCATI_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_IVAHD_IVAHD_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
  * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
  * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL,
+ * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL
  */
 #define OMAP4430_STBYST_SHIFT					18
+#define OMAP4430_STBYST_WIDTH					0x1
 #define OMAP4430_STBYST_MASK					(1 << 18)
 
 /*
@@ -1364,10 +1607,12 @@
  * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
  */
 #define OMAP4430_ST_DPLL_CLK_SHIFT				0
+#define OMAP4430_ST_DPLL_CLK_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLK_MASK				(1 << 0)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
 #define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			9
+#define OMAP4430_ST_DPLL_CLKDCOLDO_WIDTH			0x1
 #define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				(1 << 9)
 
 /*
@@ -1375,14 +1620,17 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
  */
 #define OMAP4430_ST_DPLL_CLKOUT_SHIFT				9
+#define OMAP4430_ST_DPLL_CLKOUT_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLKOUT_MASK				(1 << 9)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			9
+#define OMAP4430_ST_DPLL_CLKOUTHIF_WIDTH			0x1
 #define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				(1 << 9)
 
 /* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
 #define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				11
+#define OMAP4430_ST_DPLL_CLKOUTX2_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLKOUTX2_MASK				(1 << 11)
 
 /*
@@ -1390,6 +1638,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			(1 << 9)
 
 /*
@@ -1397,14 +1646,17 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			(1 << 9)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			(1 << 9)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			(1 << 9)
 
 /*
@@ -1413,18 +1665,22 @@
  * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
  */
 #define OMAP4430_ST_MN_BYPASS_SHIFT				8
+#define OMAP4430_ST_MN_BYPASS_WIDTH				0x1
 #define OMAP4430_ST_MN_BYPASS_MASK				(1 << 8)
 
 /* Used by CM_SYS_CLKSEL */
 #define OMAP4430_SYS_CLKSEL_SHIFT				0
+#define OMAP4430_SYS_CLKSEL_WIDTH				0x3
 #define OMAP4430_SYS_CLKSEL_MASK				(0x7 << 0)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_TESLA_DYNDEP_SHIFT				1
+#define OMAP4430_TESLA_DYNDEP_WIDTH				0x1
 #define OMAP4430_TESLA_DYNDEP_MASK				(1 << 1)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_TESLA_STATDEP_SHIFT				1
+#define OMAP4430_TESLA_STATDEP_WIDTH				0x1
 #define OMAP4430_TESLA_STATDEP_MASK				(1 << 1)
 
 /*
@@ -1433,13 +1689,16 @@
  * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
 #define OMAP4430_WINDOWSIZE_SHIFT				24
+#define OMAP4430_WINDOWSIZE_WIDTH				0x4
 #define OMAP4430_WINDOWSIZE_MASK				(0xf << 24)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_X_MAJOR_SHIFT					8
+#define OMAP4430_X_MAJOR_WIDTH					0x3
 #define OMAP4430_X_MAJOR_MASK					(0x7 << 8)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_Y_MINOR_SHIFT					0
+#define OMAP4430_Y_MINOR_WIDTH					0x6
 #define OMAP4430_Y_MINOR_MASK					(0x3f << 0)
 #endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/common-board-devices.c linux-libre-3.7-gnu/arch/arm/mach-omap2/common-board-devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/common-board-devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/common-board-devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,9 +24,10 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <plat/mcspi.h>
-#include <plat/nand.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 
+#include "common.h"
 #include "common-board-devices.h"
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
@@ -63,30 +64,36 @@
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
-	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-	if (err) {
-		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-		return;
-	}
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
+	if (board_pdata && board_pdata->get_pendown_state) {
+		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+		if (err) {
+			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+			return;
+		}
 
-	if (gpio_debounce)
-		gpio_set_debounce(gpio_pendown, gpio_debounce);
+		if (gpio_debounce)
+			gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+		gpio_export(gpio_pendown, 0);
+	}
 
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= gpio_to_irq(gpio_pendown);
 
+	ads7846_config.gpio_pendown = gpio_pendown;
+
 	if (board_pdata) {
 		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
-		if (board_pdata->get_pendown_state)
-			gpio_export(gpio_pendown, 0);
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
 	}
 
-	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-		gpio_free(gpio_pendown);
-
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else
@@ -119,8 +126,7 @@
 	}
 
 	if (nandcs > GPMC_CS_NUM) {
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				 "in GPMC\n ");
+		pr_info("NAND: Unable to find configuration in GPMC\n");
 		return;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/common.c linux-libre-3.7-gnu/arch/arm/mach-omap2/common.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/common.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/common.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,11 +17,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
-#include <plat/board.h>
-#include <plat/mux.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "sdrc.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/common.h linux-libre-3.7-gnu/arch/arm/mach-omap2/common.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/common.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/common.h	2012-12-10 22:30:57.000000000 -0500
@@ -26,11 +26,18 @@
 #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
 #ifndef __ASSEMBLER__
 
+#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
-#include <plat/common.h>
+
 #include <asm/proc-fns.h>
 
+#include <plat/cpu.h>
+#include <plat/serial.h>
+#include <plat/common.h>
+
+#define OMAP_INTC_START		NR_IRQS
+
 #ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);
 #else
@@ -278,6 +285,11 @@
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);
+
+extern void omap4_cpu_die(unsigned int cpu);
+
+extern struct smp_operations omap4_smp_ops;
+
 extern void omap5_secondary_startup(void);
 #endif
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/control.c linux-libre-3.7-gnu/arch/arm/mach-omap2/control.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/control.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/control.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/sdrc.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm-regbits-34xx.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/control.h linux-libre-3.7-gnu/arch/arm/mach-omap2/control.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/control.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/control.h	2012-12-10 22:30:57.000000000 -0500
@@ -16,12 +16,12 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
 #define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
-#include <mach/ctrl_module_core_44xx.h>
-#include <mach/ctrl_module_wkup_44xx.h>
-#include <mach/ctrl_module_pad_core_44xx.h>
-#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include "ctrl_module_core_44xx.h"
+#include "ctrl_module_wkup_44xx.h"
+#include "ctrl_module_pad_core_44xx.h"
+#include "ctrl_module_pad_wkup_44xx.h"
 
-#include <plat/am33xx.h>
+#include "am33xx.h"
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
@@ -354,6 +354,7 @@
 
 /* AM33XX CONTROL_STATUS bitfields (partial) */
 #define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT		22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH		0x2
 #define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK		(0x3 << 22)
 
 /* CONTROL OMAP STATUS register to identify OMAP3 features */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/cpuidle34xx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/cpuidle34xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/cpuidle34xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/cpuidle34xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,7 +28,6 @@
 #include <linux/cpu_pm.h>
 
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_core_44xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_core_44xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_core_44xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_core_44xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,392 @@
+/*
+ * OMAP44xx CTRL_MODULE_CORE registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_CORE					0x4a002000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_CORE_IP_REVISION			0x0000
+#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO			0x0004
+#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG			0x0010
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0		0x0200
+#define OMAP4_CTRL_MODULE_CORE_ID_CODE				0x0204
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1		0x0208
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2		0x020c
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3		0x0210
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0		0x0214
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1		0x0218
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF		0x021c
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP		0x0228
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP		0x0260
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0		0x0264
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1		0x0268
+#define OMAP4_CTRL_MODULE_CORE_STATUS				0x02c4
+#define OMAP4_CTRL_MODULE_CORE_DEV_CONF				0x0300
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR			0x0304
+#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL		0x0314
+#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL		0x0318
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL		0x0320
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL		0x0324
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL	0x0328
+#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR			0x032c
+#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0		0x0330
+#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1		0x0334
+#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL			0x033c
+#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL			0x0340
+#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL			0x0350
+#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL		0x0400
+#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU			0x0408
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0		0x042c
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1		0x0430
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2		0x0434
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3		0x0438
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0			0x0440
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1			0x0444
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2			0x0448
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL		0x044c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL		0x0450
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL		0x0454
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0		0x0480
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1		0x0484
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2		0x0488
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3		0x048c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4		0x0490
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5		0x0494
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6		0x0498
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7		0x049c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8		0x04a0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9		0x04a4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10		0x04a8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11		0x04ac
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12		0x04b0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13		0x04b4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14		0x04b8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15		0x04bc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16		0x04c0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17		0x04c4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18		0x04c8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19		0x04cc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20		0x04d0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21		0x04d4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22		0x04d8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23		0x04dc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24		0x04e0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25		0x04e4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26		0x04e8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27		0x04ec
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28		0x04f0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29		0x04f4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30		0x04f8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31		0x04fc
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT			30
+#define OMAP4_IP_REV_SCHEME_MASK			(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT				16
+#define OMAP4_IP_REV_FUNC_MASK				(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT				11
+#define OMAP4_IP_REV_RTL_MASK				(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT			8
+#define OMAP4_IP_REV_MAJOR_MASK				(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT			6
+#define OMAP4_IP_REV_CUSTOM_MASK			(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT			0
+#define OMAP4_IP_REV_MINOR_MASK				(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT				0
+#define OMAP4_IP_HWINFO_MASK				(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT		2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK		(0x3 << 2)
+
+/* STD_FUSE_DIE_ID_0 */
+#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_0_MASK			(0xffffffff << 0)
+
+/* ID_CODE */
+#define OMAP4_STD_FUSE_IDCODE_SHIFT			0
+#define OMAP4_STD_FUSE_IDCODE_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_1 */
+#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_1_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_2 */
+#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_2_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_3 */
+#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_3_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_PROD_ID_0 */
+#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT			0
+#define OMAP4_STD_FUSE_PROD_ID_0_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_PROD_ID_1 */
+#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT			0
+#define OMAP4_STD_FUSE_PROD_ID_1_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_USB_CONF */
+#define OMAP4_USB_PROD_ID_SHIFT				16
+#define OMAP4_USB_PROD_ID_MASK				(0xffff << 16)
+#define OMAP4_USB_VENDOR_ID_SHIFT			0
+#define OMAP4_USB_VENDOR_ID_MASK			(0xffff << 0)
+
+/* STD_FUSE_OPP_VDD_WKUP */
+#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT		0
+#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK		(0xffffffff << 0)
+
+/* STD_FUSE_OPP_BGAP */
+#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT			0
+#define OMAP4_STD_FUSE_OPP_BGAP_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_OPP_DPLL_0 */
+#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT			0
+#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_OPP_DPLL_1 */
+#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT			0
+#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK			(0xffffffff << 0)
+
+/* STATUS */
+#define OMAP4_ATTILA_CONF_SHIFT				11
+#define OMAP4_ATTILA_CONF_MASK				(0x3 << 11)
+#define OMAP4_DEVICE_TYPE_SHIFT				8
+#define OMAP4_DEVICE_TYPE_MASK				(0x7 << 8)
+#define OMAP4_SYS_BOOT_SHIFT				0
+#define OMAP4_SYS_BOOT_MASK				(0xff << 0)
+
+/* DEV_CONF */
+#define OMAP4_DEV_CONF_SHIFT				1
+#define OMAP4_DEV_CONF_MASK				(0x7fffffff << 1)
+#define OMAP4_USBPHY_PD_SHIFT				0
+#define OMAP4_USBPHY_PD_MASK				(1 << 0)
+
+/* LDOVBB_IVA_VOLTAGE_CTRL */
+#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT		21
+#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT		16
+#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT		5
+#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT		0
+#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOVBB_MPU_VOLTAGE_CTRL */
+#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT		21
+#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT		16
+#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT		5
+#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT		0
+#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOSRAM_IVA_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT		21
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT		16
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT		5
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT		0
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOSRAM_MPU_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT		21
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT		16
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT		5
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT		0
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOSRAM_CORE_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT	26
+#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT		21
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT	16
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT	10
+#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT		5
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT	0
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
+
+/* TEMP_SENSOR */
+#define OMAP4_BGAP_TEMPSOFF_SHIFT			12
+#define OMAP4_BGAP_TEMPSOFF_MASK			(1 << 12)
+#define OMAP4_BGAP_TSHUT_SHIFT				11
+#define OMAP4_BGAP_TSHUT_MASK				(1 << 11)
+#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT		10
+#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK		(1 << 10)
+#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT		9
+#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK			(1 << 9)
+#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT		8
+#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK		(1 << 8)
+#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT		0
+#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff << 0)
+
+/* DPLL_NWELL_TRIM_0 */
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT	29
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK		(1 << 29)
+#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT			24
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK			(0x1f << 24)
+#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT	23
+#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
+#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT			18
+#define OMAP4_DPLL_PER_NWELL_TRIM_MASK			(0x1f << 18)
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT	17
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
+#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT		12
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK			(0x1f << 12)
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT	11
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK		(1 << 11)
+#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT			6
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK			(0x1f << 6)
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT	5
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK		(1 << 5)
+#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT			0
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK			(0x1f << 0)
+
+/* DPLL_NWELL_TRIM_1 */
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT	29
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK	(1 << 29)
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT		24
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK		(0x1f << 24)
+#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT	23
+#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
+#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT			18
+#define OMAP4_DPLL_USB_NWELL_TRIM_MASK			(0x1f << 18)
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT	17
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT		12
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK			(0x1f << 12)
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT	11
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK	(1 << 11)
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT		6
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK			(0x1f << 6)
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT	5
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK	(1 << 5)
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT		0
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK			(0x1f << 0)
+
+/* USBOTGHS_CONTROL */
+#define OMAP4_DISCHRGVBUS_SHIFT				8
+#define OMAP4_DISCHRGVBUS_MASK				(1 << 8)
+#define OMAP4_CHRGVBUS_SHIFT				7
+#define OMAP4_CHRGVBUS_MASK				(1 << 7)
+#define OMAP4_DRVVBUS_SHIFT				6
+#define OMAP4_DRVVBUS_MASK				(1 << 6)
+#define OMAP4_IDPULLUP_SHIFT				5
+#define OMAP4_IDPULLUP_MASK				(1 << 5)
+#define OMAP4_IDDIG_SHIFT				4
+#define OMAP4_IDDIG_MASK				(1 << 4)
+#define OMAP4_SESSEND_SHIFT				3
+#define OMAP4_SESSEND_MASK				(1 << 3)
+#define OMAP4_VBUSVALID_SHIFT				2
+#define OMAP4_VBUSVALID_MASK				(1 << 2)
+#define OMAP4_BVALID_SHIFT				1
+#define OMAP4_BVALID_MASK				(1 << 1)
+#define OMAP4_AVALID_SHIFT				0
+#define OMAP4_AVALID_MASK				(1 << 0)
+
+/* DSS_CONTROL */
+#define OMAP4_DSS_MUX6_SELECT_SHIFT			0
+#define OMAP4_DSS_MUX6_SELECT_MASK			(1 << 0)
+
+/* HWOBS_CONTROL */
+#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT			3
+#define OMAP4_HWOBS_CLKDIV_SEL_MASK			(0x1f << 3)
+#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT			2
+#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK			(1 << 2)
+#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT			1
+#define OMAP4_HWOBS_ALL_ONE_MODE_MASK			(1 << 1)
+#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT			0
+#define OMAP4_HWOBS_MACRO_ENABLE_MASK			(1 << 0)
+
+/* DEBOBS_FINAL_MUX_SEL */
+#define OMAP4_SELECT_SHIFT				0
+#define OMAP4_SELECT_MASK				(0xffffffff << 0)
+
+/* DEBOBS_MMR_MPU */
+#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT		0
+#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK		(0xf << 0)
+
+/* CONF_SDMA_REQ_SEL0 */
+#define OMAP4_MULT_SHIFT				0
+#define OMAP4_MULT_MASK					(0x7f << 0)
+
+/* CONF_CLK_SEL0 */
+#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT			0
+#define OMAP4_MULT_CONF_CLK_SEL0_MASK			(0x7 << 0)
+
+/* CONF_CLK_SEL1 */
+#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT			0
+#define OMAP4_MULT_CONF_CLK_SEL1_MASK			(0x7 << 0)
+
+/* CONF_CLK_SEL2 */
+#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT			0
+#define OMAP4_MULT_CONF_CLK_SEL2_MASK			(0x7 << 0)
+
+/* CONF_DPLL_FREQLOCK_SEL */
+#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT		0
+#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK		(0x7 << 0)
+
+/* CONF_DPLL_TINITZ_SEL */
+#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT		0
+#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK		(0x7 << 0)
+
+/* CONF_DPLL_PHASELOCK_SEL */
+#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT	0
+#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK		(0x7 << 0)
+
+/* CONF_DEBUG_SEL_TST_0 */
+#define OMAP4_MODE_SHIFT				0
+#define OMAP4_MODE_MASK					(0xf << 0)
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,1409 @@
+/*
+ * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_PAD_CORE				0x4a100000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION			0x0000
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO			0x0004
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG			0x0010
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0	0x01d8
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1	0x01dc
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2	0x01e0
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3	0x01e4
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4	0x01e8
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5	0x01ec
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6	0x01f0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL	0x05a0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE		0x05a4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0	0x05a8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1	0x05ac
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0	0x05b0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1	0x05b4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0	0x05b8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1	0x05bc
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2	0x05c0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC		0x05c4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS		0x05c8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE		0x0600
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0		0x0604
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX		0x0608
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC		0x060c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY		0x0610
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2			0x0614
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY		0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP		0x061c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE		0x0620
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1		0x0624
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1			0x0628
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI			0x062c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB			0x0630
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ			0x0634
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0		0x0638
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1		0x063c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2		0x0640
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3		0x0644
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0		0x0648
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1		0x064c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2		0x0650
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3		0x0654
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD		0x0658
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C			0x065c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW	0x0660
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R		0x0664
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0	0x0668
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1		0x0700
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2		0x0704
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3		0x0708
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4		0x070c
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT				30
+#define OMAP4_IP_REV_SCHEME_MASK				(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT					16
+#define OMAP4_IP_REV_FUNC_MASK					(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT					11
+#define OMAP4_IP_REV_RTL_MASK					(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT				8
+#define OMAP4_IP_REV_MAJOR_MASK					(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT				6
+#define OMAP4_IP_REV_CUSTOM_MASK				(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT				0
+#define OMAP4_IP_REV_MINOR_MASK					(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT					0
+#define OMAP4_IP_HWINFO_MASK					(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT			2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK			(0x3 << 2)
+
+/* PADCONF_WAKEUPEVENT_0 */
+#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_1 */
+#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_2 */
+#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	31
+#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	27
+#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	14
+#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 14)
+#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	13
+#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	12
+#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 12)
+#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	11
+#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 11)
+#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	10
+#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 10)
+#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	9
+#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 9)
+#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	8
+#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 8)
+#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	7
+#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 7)
+#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	6
+#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 6)
+#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	5
+#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 5)
+#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	4
+#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 4)
+#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	3
+#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 3)
+#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	2
+#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 2)
+#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	1
+#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 1)
+#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT	0
+#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_3 */
+#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK			(1 << 16)
+#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	4
+#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	3
+#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_4 */
+#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	29
+#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 29)
+#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	28
+#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	27
+#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 27)
+#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	26
+#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 26)
+#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	25
+#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 25)
+#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	24
+#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 24)
+#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	23
+#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 23)
+#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	22
+#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 22)
+#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	21
+#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 21)
+#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	20
+#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 20)
+#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	19
+#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 19)
+#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	18
+#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 18)
+#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	17
+#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 17)
+#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	16
+#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 16)
+#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_5 */
+#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_6 */
+#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* CONTROL_PADCONF_GLOBAL */
+#define OMAP4_FORCE_OFFMODE_EN_SHIFT				31
+#define OMAP4_FORCE_OFFMODE_EN_MASK				(1 << 31)
+
+/* CONTROL_PADCONF_MODE */
+#define OMAP4_VDDS_DV_BANK0_SHIFT				31
+#define OMAP4_VDDS_DV_BANK0_MASK				(1 << 31)
+#define OMAP4_VDDS_DV_BANK1_SHIFT				30
+#define OMAP4_VDDS_DV_BANK1_MASK				(1 << 30)
+#define OMAP4_VDDS_DV_BANK3_SHIFT				29
+#define OMAP4_VDDS_DV_BANK3_MASK				(1 << 29)
+#define OMAP4_VDDS_DV_BANK4_SHIFT				28
+#define OMAP4_VDDS_DV_BANK4_MASK				(1 << 28)
+#define OMAP4_VDDS_DV_BANK5_SHIFT				27
+#define OMAP4_VDDS_DV_BANK5_MASK				(1 << 27)
+#define OMAP4_VDDS_DV_BANK6_SHIFT				26
+#define OMAP4_VDDS_DV_BANK6_MASK				(1 << 26)
+#define OMAP4_VDDS_DV_C2C_SHIFT					25
+#define OMAP4_VDDS_DV_C2C_MASK					(1 << 25)
+#define OMAP4_VDDS_DV_CAM_SHIFT					24
+#define OMAP4_VDDS_DV_CAM_MASK					(1 << 24)
+#define OMAP4_VDDS_DV_GPMC_SHIFT				23
+#define OMAP4_VDDS_DV_GPMC_MASK					(1 << 23)
+#define OMAP4_VDDS_DV_SDMMC2_SHIFT				22
+#define OMAP4_VDDS_DV_SDMMC2_MASK				(1 << 22)
+
+/* CONTROL_SMART1IO_PADCONF_0 */
+#define OMAP4_ABE_DR0_SC_SHIFT					30
+#define OMAP4_ABE_DR0_SC_MASK					(0x3 << 30)
+#define OMAP4_CAM_DR0_SC_SHIFT					28
+#define OMAP4_CAM_DR0_SC_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR2_SC_SHIFT					26
+#define OMAP4_FREF_DR2_SC_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR3_SC_SHIFT					24
+#define OMAP4_FREF_DR3_SC_MASK					(0x3 << 24)
+#define OMAP4_GPIO_DR8_SC_SHIFT					22
+#define OMAP4_GPIO_DR8_SC_MASK					(0x3 << 22)
+#define OMAP4_GPIO_DR9_SC_SHIFT					20
+#define OMAP4_GPIO_DR9_SC_MASK					(0x3 << 20)
+#define OMAP4_GPMC_DR2_SC_SHIFT					18
+#define OMAP4_GPMC_DR2_SC_MASK					(0x3 << 18)
+#define OMAP4_GPMC_DR3_SC_SHIFT					16
+#define OMAP4_GPMC_DR3_SC_MASK					(0x3 << 16)
+#define OMAP4_GPMC_DR6_SC_SHIFT					14
+#define OMAP4_GPMC_DR6_SC_MASK					(0x3 << 14)
+#define OMAP4_HDMI_DR0_SC_SHIFT					12
+#define OMAP4_HDMI_DR0_SC_MASK					(0x3 << 12)
+#define OMAP4_MCSPI1_DR0_SC_SHIFT				10
+#define OMAP4_MCSPI1_DR0_SC_MASK				(0x3 << 10)
+#define OMAP4_UART1_DR0_SC_SHIFT				8
+#define OMAP4_UART1_DR0_SC_MASK					(0x3 << 8)
+#define OMAP4_UART3_DR0_SC_SHIFT				6
+#define OMAP4_UART3_DR0_SC_MASK					(0x3 << 6)
+#define OMAP4_UART3_DR1_SC_SHIFT				4
+#define OMAP4_UART3_DR1_SC_MASK					(0x3 << 4)
+#define OMAP4_UNIPRO_DR0_SC_SHIFT				2
+#define OMAP4_UNIPRO_DR0_SC_MASK				(0x3 << 2)
+#define OMAP4_UNIPRO_DR1_SC_SHIFT				0
+#define OMAP4_UNIPRO_DR1_SC_MASK				(0x3 << 0)
+
+/* CONTROL_SMART1IO_PADCONF_1 */
+#define OMAP4_ABE_DR0_LB_SHIFT					30
+#define OMAP4_ABE_DR0_LB_MASK					(0x3 << 30)
+#define OMAP4_CAM_DR0_LB_SHIFT					28
+#define OMAP4_CAM_DR0_LB_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR2_LB_SHIFT					26
+#define OMAP4_FREF_DR2_LB_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR3_LB_SHIFT					24
+#define OMAP4_FREF_DR3_LB_MASK					(0x3 << 24)
+#define OMAP4_GPIO_DR8_LB_SHIFT					22
+#define OMAP4_GPIO_DR8_LB_MASK					(0x3 << 22)
+#define OMAP4_GPIO_DR9_LB_SHIFT					20
+#define OMAP4_GPIO_DR9_LB_MASK					(0x3 << 20)
+#define OMAP4_GPMC_DR2_LB_SHIFT					18
+#define OMAP4_GPMC_DR2_LB_MASK					(0x3 << 18)
+#define OMAP4_GPMC_DR3_LB_SHIFT					16
+#define OMAP4_GPMC_DR3_LB_MASK					(0x3 << 16)
+#define OMAP4_GPMC_DR6_LB_SHIFT					14
+#define OMAP4_GPMC_DR6_LB_MASK					(0x3 << 14)
+#define OMAP4_HDMI_DR0_LB_SHIFT					12
+#define OMAP4_HDMI_DR0_LB_MASK					(0x3 << 12)
+#define OMAP4_MCSPI1_DR0_LB_SHIFT				10
+#define OMAP4_MCSPI1_DR0_LB_MASK				(0x3 << 10)
+#define OMAP4_UART1_DR0_LB_SHIFT				8
+#define OMAP4_UART1_DR0_LB_MASK					(0x3 << 8)
+#define OMAP4_UART3_DR0_LB_SHIFT				6
+#define OMAP4_UART3_DR0_LB_MASK					(0x3 << 6)
+#define OMAP4_UART3_DR1_LB_SHIFT				4
+#define OMAP4_UART3_DR1_LB_MASK					(0x3 << 4)
+#define OMAP4_UNIPRO_DR0_LB_SHIFT				2
+#define OMAP4_UNIPRO_DR0_LB_MASK				(0x3 << 2)
+#define OMAP4_UNIPRO_DR1_LB_SHIFT				0
+#define OMAP4_UNIPRO_DR1_LB_MASK				(0x3 << 0)
+
+/* CONTROL_SMART2IO_PADCONF_0 */
+#define OMAP4_C2C_DR0_LB_SHIFT					31
+#define OMAP4_C2C_DR0_LB_MASK					(1 << 31)
+#define OMAP4_DPM_DR1_LB_SHIFT					30
+#define OMAP4_DPM_DR1_LB_MASK					(1 << 30)
+#define OMAP4_DPM_DR2_LB_SHIFT					29
+#define OMAP4_DPM_DR2_LB_MASK					(1 << 29)
+#define OMAP4_DPM_DR3_LB_SHIFT					28
+#define OMAP4_DPM_DR3_LB_MASK					(1 << 28)
+#define OMAP4_GPIO_DR0_LB_SHIFT					27
+#define OMAP4_GPIO_DR0_LB_MASK					(1 << 27)
+#define OMAP4_GPIO_DR1_LB_SHIFT					26
+#define OMAP4_GPIO_DR1_LB_MASK					(1 << 26)
+#define OMAP4_GPIO_DR10_LB_SHIFT				25
+#define OMAP4_GPIO_DR10_LB_MASK					(1 << 25)
+#define OMAP4_GPIO_DR2_LB_SHIFT					24
+#define OMAP4_GPIO_DR2_LB_MASK					(1 << 24)
+#define OMAP4_GPMC_DR0_LB_SHIFT					23
+#define OMAP4_GPMC_DR0_LB_MASK					(1 << 23)
+#define OMAP4_GPMC_DR1_LB_SHIFT					22
+#define OMAP4_GPMC_DR1_LB_MASK					(1 << 22)
+#define OMAP4_GPMC_DR4_LB_SHIFT					21
+#define OMAP4_GPMC_DR4_LB_MASK					(1 << 21)
+#define OMAP4_GPMC_DR5_LB_SHIFT					20
+#define OMAP4_GPMC_DR5_LB_MASK					(1 << 20)
+#define OMAP4_GPMC_DR7_LB_SHIFT					19
+#define OMAP4_GPMC_DR7_LB_MASK					(1 << 19)
+#define OMAP4_HSI2_DR0_LB_SHIFT					18
+#define OMAP4_HSI2_DR0_LB_MASK					(1 << 18)
+#define OMAP4_HSI2_DR1_LB_SHIFT					17
+#define OMAP4_HSI2_DR1_LB_MASK					(1 << 17)
+#define OMAP4_HSI2_DR2_LB_SHIFT					16
+#define OMAP4_HSI2_DR2_LB_MASK					(1 << 16)
+#define OMAP4_KPD_DR0_LB_SHIFT					15
+#define OMAP4_KPD_DR0_LB_MASK					(1 << 15)
+#define OMAP4_KPD_DR1_LB_SHIFT					14
+#define OMAP4_KPD_DR1_LB_MASK					(1 << 14)
+#define OMAP4_PDM_DR0_LB_SHIFT					13
+#define OMAP4_PDM_DR0_LB_MASK					(1 << 13)
+#define OMAP4_SDMMC2_DR0_LB_SHIFT				12
+#define OMAP4_SDMMC2_DR0_LB_MASK				(1 << 12)
+#define OMAP4_SDMMC3_DR0_LB_SHIFT				11
+#define OMAP4_SDMMC3_DR0_LB_MASK				(1 << 11)
+#define OMAP4_SDMMC4_DR0_LB_SHIFT				10
+#define OMAP4_SDMMC4_DR0_LB_MASK				(1 << 10)
+#define OMAP4_SDMMC4_DR1_LB_SHIFT				9
+#define OMAP4_SDMMC4_DR1_LB_MASK				(1 << 9)
+#define OMAP4_SPI3_DR0_LB_SHIFT					8
+#define OMAP4_SPI3_DR0_LB_MASK					(1 << 8)
+#define OMAP4_SPI3_DR1_LB_SHIFT					7
+#define OMAP4_SPI3_DR1_LB_MASK					(1 << 7)
+#define OMAP4_UART3_DR2_LB_SHIFT				6
+#define OMAP4_UART3_DR2_LB_MASK					(1 << 6)
+#define OMAP4_UART3_DR3_LB_SHIFT				5
+#define OMAP4_UART3_DR3_LB_MASK					(1 << 5)
+#define OMAP4_UART3_DR4_LB_SHIFT				4
+#define OMAP4_UART3_DR4_LB_MASK					(1 << 4)
+#define OMAP4_UART3_DR5_LB_SHIFT				3
+#define OMAP4_UART3_DR5_LB_MASK					(1 << 3)
+#define OMAP4_USBA0_DR1_LB_SHIFT				2
+#define OMAP4_USBA0_DR1_LB_MASK					(1 << 2)
+#define OMAP4_USBA_DR2_LB_SHIFT					1
+#define OMAP4_USBA_DR2_LB_MASK					(1 << 1)
+
+/* CONTROL_SMART2IO_PADCONF_1 */
+#define OMAP4_USBB1_DR0_LB_SHIFT				31
+#define OMAP4_USBB1_DR0_LB_MASK					(1 << 31)
+#define OMAP4_USBB2_DR0_LB_SHIFT				30
+#define OMAP4_USBB2_DR0_LB_MASK					(1 << 30)
+#define OMAP4_USBA0_DR0_LB_SHIFT				29
+#define OMAP4_USBA0_DR0_LB_MASK					(1 << 29)
+
+/* CONTROL_SMART3IO_PADCONF_0 */
+#define OMAP4_DMIC_DR0_MB_SHIFT					30
+#define OMAP4_DMIC_DR0_MB_MASK					(0x3 << 30)
+#define OMAP4_GPIO_DR3_MB_SHIFT					28
+#define OMAP4_GPIO_DR3_MB_MASK					(0x3 << 28)
+#define OMAP4_GPIO_DR4_MB_SHIFT					26
+#define OMAP4_GPIO_DR4_MB_MASK					(0x3 << 26)
+#define OMAP4_GPIO_DR5_MB_SHIFT					24
+#define OMAP4_GPIO_DR5_MB_MASK					(0x3 << 24)
+#define OMAP4_GPIO_DR6_MB_SHIFT					22
+#define OMAP4_GPIO_DR6_MB_MASK					(0x3 << 22)
+#define OMAP4_HSI_DR1_MB_SHIFT					20
+#define OMAP4_HSI_DR1_MB_MASK					(0x3 << 20)
+#define OMAP4_HSI_DR2_MB_SHIFT					18
+#define OMAP4_HSI_DR2_MB_MASK					(0x3 << 18)
+#define OMAP4_HSI_DR3_MB_SHIFT					16
+#define OMAP4_HSI_DR3_MB_MASK					(0x3 << 16)
+#define OMAP4_MCBSP2_DR0_MB_SHIFT				14
+#define OMAP4_MCBSP2_DR0_MB_MASK				(0x3 << 14)
+#define OMAP4_MCSPI4_DR0_MB_SHIFT				12
+#define OMAP4_MCSPI4_DR0_MB_MASK				(0x3 << 12)
+#define OMAP4_MCSPI4_DR1_MB_SHIFT				10
+#define OMAP4_MCSPI4_DR1_MB_MASK				(0x3 << 10)
+#define OMAP4_SDMMC3_DR0_MB_SHIFT				8
+#define OMAP4_SDMMC3_DR0_MB_MASK				(0x3 << 8)
+#define OMAP4_SPI2_DR0_MB_SHIFT					0
+#define OMAP4_SPI2_DR0_MB_MASK					(0x3 << 0)
+
+/* CONTROL_SMART3IO_PADCONF_1 */
+#define OMAP4_SPI2_DR1_MB_SHIFT					30
+#define OMAP4_SPI2_DR1_MB_MASK					(0x3 << 30)
+#define OMAP4_SPI2_DR2_MB_SHIFT					28
+#define OMAP4_SPI2_DR2_MB_MASK					(0x3 << 28)
+#define OMAP4_UART2_DR0_MB_SHIFT				26
+#define OMAP4_UART2_DR0_MB_MASK					(0x3 << 26)
+#define OMAP4_UART2_DR1_MB_SHIFT				24
+#define OMAP4_UART2_DR1_MB_MASK					(0x3 << 24)
+#define OMAP4_UART4_DR0_MB_SHIFT				22
+#define OMAP4_UART4_DR0_MB_MASK					(0x3 << 22)
+#define OMAP4_HSI_DR0_MB_SHIFT					20
+#define OMAP4_HSI_DR0_MB_MASK					(0x3 << 20)
+
+/* CONTROL_SMART3IO_PADCONF_2 */
+#define OMAP4_DMIC_DR0_LB_SHIFT					31
+#define OMAP4_DMIC_DR0_LB_MASK					(1 << 31)
+#define OMAP4_GPIO_DR3_LB_SHIFT					30
+#define OMAP4_GPIO_DR3_LB_MASK					(1 << 30)
+#define OMAP4_GPIO_DR4_LB_SHIFT					29
+#define OMAP4_GPIO_DR4_LB_MASK					(1 << 29)
+#define OMAP4_GPIO_DR5_LB_SHIFT					28
+#define OMAP4_GPIO_DR5_LB_MASK					(1 << 28)
+#define OMAP4_GPIO_DR6_LB_SHIFT					27
+#define OMAP4_GPIO_DR6_LB_MASK					(1 << 27)
+#define OMAP4_HSI_DR1_LB_SHIFT					26
+#define OMAP4_HSI_DR1_LB_MASK					(1 << 26)
+#define OMAP4_HSI_DR2_LB_SHIFT					25
+#define OMAP4_HSI_DR2_LB_MASK					(1 << 25)
+#define OMAP4_HSI_DR3_LB_SHIFT					24
+#define OMAP4_HSI_DR3_LB_MASK					(1 << 24)
+#define OMAP4_MCBSP2_DR0_LB_SHIFT				23
+#define OMAP4_MCBSP2_DR0_LB_MASK				(1 << 23)
+#define OMAP4_MCSPI4_DR0_LB_SHIFT				22
+#define OMAP4_MCSPI4_DR0_LB_MASK				(1 << 22)
+#define OMAP4_MCSPI4_DR1_LB_SHIFT				21
+#define OMAP4_MCSPI4_DR1_LB_MASK				(1 << 21)
+#define OMAP4_SLIMBUS2_DR0_LB_SHIFT				18
+#define OMAP4_SLIMBUS2_DR0_LB_MASK				(1 << 18)
+#define OMAP4_SPI2_DR0_LB_SHIFT					16
+#define OMAP4_SPI2_DR0_LB_MASK					(1 << 16)
+#define OMAP4_SPI2_DR1_LB_SHIFT					15
+#define OMAP4_SPI2_DR1_LB_MASK					(1 << 15)
+#define OMAP4_SPI2_DR2_LB_SHIFT					14
+#define OMAP4_SPI2_DR2_LB_MASK					(1 << 14)
+#define OMAP4_UART2_DR0_LB_SHIFT				13
+#define OMAP4_UART2_DR0_LB_MASK					(1 << 13)
+#define OMAP4_UART2_DR1_LB_SHIFT				12
+#define OMAP4_UART2_DR1_LB_MASK					(1 << 12)
+#define OMAP4_UART4_DR0_LB_SHIFT				11
+#define OMAP4_UART4_DR0_LB_MASK					(1 << 11)
+#define OMAP4_HSI_DR0_LB_SHIFT					10
+#define OMAP4_HSI_DR0_LB_MASK					(1 << 10)
+
+/* CONTROL_USBB_HSIC */
+#define OMAP4_USBB2_DR1_SR_SHIFT				30
+#define OMAP4_USBB2_DR1_SR_MASK					(0x3 << 30)
+#define OMAP4_USBB2_DR1_I_SHIFT					27
+#define OMAP4_USBB2_DR1_I_MASK					(0x7 << 27)
+#define OMAP4_USBB1_DR1_SR_SHIFT				25
+#define OMAP4_USBB1_DR1_SR_MASK					(0x3 << 25)
+#define OMAP4_USBB1_DR1_I_SHIFT					22
+#define OMAP4_USBB1_DR1_I_MASK					(0x7 << 22)
+#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT				20
+#define OMAP4_USBB1_HSIC_DATA_WD_MASK				(0x3 << 20)
+#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT			18
+#define OMAP4_USBB1_HSIC_STROBE_WD_MASK				(0x3 << 18)
+#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT				16
+#define OMAP4_USBB2_HSIC_DATA_WD_MASK				(0x3 << 16)
+#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT			14
+#define OMAP4_USBB2_HSIC_STROBE_WD_MASK				(0x3 << 14)
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		13
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 13)
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT			11
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 11)
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		10
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 10)
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT		8
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 8)
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		7
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 7)
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT			5
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 5)
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		4
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 4)
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT		2
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 2)
+
+/* CONTROL_SLIMBUS */
+#define OMAP4_SLIMBUS1_DR0_MB_SHIFT				30
+#define OMAP4_SLIMBUS1_DR0_MB_MASK				(0x3 << 30)
+#define OMAP4_SLIMBUS1_DR1_MB_SHIFT				28
+#define OMAP4_SLIMBUS1_DR1_MB_MASK				(0x3 << 28)
+#define OMAP4_SLIMBUS2_DR0_MB_SHIFT				26
+#define OMAP4_SLIMBUS2_DR0_MB_MASK				(0x3 << 26)
+#define OMAP4_SLIMBUS2_DR1_MB_SHIFT				24
+#define OMAP4_SLIMBUS2_DR1_MB_MASK				(0x3 << 24)
+#define OMAP4_SLIMBUS2_DR2_MB_SHIFT				22
+#define OMAP4_SLIMBUS2_DR2_MB_MASK				(0x3 << 22)
+#define OMAP4_SLIMBUS2_DR3_MB_SHIFT				20
+#define OMAP4_SLIMBUS2_DR3_MB_MASK				(0x3 << 20)
+#define OMAP4_SLIMBUS1_DR0_LB_SHIFT				19
+#define OMAP4_SLIMBUS1_DR0_LB_MASK				(1 << 19)
+#define OMAP4_SLIMBUS2_DR1_LB_SHIFT				18
+#define OMAP4_SLIMBUS2_DR1_LB_MASK				(1 << 18)
+
+/* CONTROL_PBIASLITE */
+#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT			31
+#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK			(1 << 31)
+#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT		30
+#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 30)
+#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT			29
+#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK			(1 << 29)
+#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT			28
+#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK			(1 << 28)
+#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT			27
+#define OMAP4_USIM_PBIASLITE_VMODE_MASK				(1 << 27)
+#define OMAP4_MMC1_PWRDNZ_SHIFT					26
+#define OMAP4_MMC1_PWRDNZ_MASK					(1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT			25
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK			(1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT		24
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT			23
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK			(1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT			22
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK			(1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT			21
+#define OMAP4_MMC1_PBIASLITE_VMODE_MASK				(1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT				20
+#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK				(1 << 20)
+
+/* CONTROL_I2C_0 */
+#define OMAP4_I2C4_SDA_GLFENB_SHIFT				31
+#define OMAP4_I2C4_SDA_GLFENB_MASK				(1 << 31)
+#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT				29
+#define OMAP4_I2C4_SDA_LOAD_BITS_MASK				(0x3 << 29)
+#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT				28
+#define OMAP4_I2C4_SDA_PULLUPRESX_MASK				(1 << 28)
+#define OMAP4_I2C3_SDA_GLFENB_SHIFT				27
+#define OMAP4_I2C3_SDA_GLFENB_MASK				(1 << 27)
+#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT				25
+#define OMAP4_I2C3_SDA_LOAD_BITS_MASK				(0x3 << 25)
+#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT				24
+#define OMAP4_I2C3_SDA_PULLUPRESX_MASK				(1 << 24)
+#define OMAP4_I2C2_SDA_GLFENB_SHIFT				23
+#define OMAP4_I2C2_SDA_GLFENB_MASK				(1 << 23)
+#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT				21
+#define OMAP4_I2C2_SDA_LOAD_BITS_MASK				(0x3 << 21)
+#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT				20
+#define OMAP4_I2C2_SDA_PULLUPRESX_MASK				(1 << 20)
+#define OMAP4_I2C1_SDA_GLFENB_SHIFT				19
+#define OMAP4_I2C1_SDA_GLFENB_MASK				(1 << 19)
+#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT				17
+#define OMAP4_I2C1_SDA_LOAD_BITS_MASK				(0x3 << 17)
+#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT				16
+#define OMAP4_I2C1_SDA_PULLUPRESX_MASK				(1 << 16)
+#define OMAP4_I2C4_SCL_GLFENB_SHIFT				15
+#define OMAP4_I2C4_SCL_GLFENB_MASK				(1 << 15)
+#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT				13
+#define OMAP4_I2C4_SCL_LOAD_BITS_MASK				(0x3 << 13)
+#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT				12
+#define OMAP4_I2C4_SCL_PULLUPRESX_MASK				(1 << 12)
+#define OMAP4_I2C3_SCL_GLFENB_SHIFT				11
+#define OMAP4_I2C3_SCL_GLFENB_MASK				(1 << 11)
+#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT				9
+#define OMAP4_I2C3_SCL_LOAD_BITS_MASK				(0x3 << 9)
+#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT				8
+#define OMAP4_I2C3_SCL_PULLUPRESX_MASK				(1 << 8)
+#define OMAP4_I2C2_SCL_GLFENB_SHIFT				7
+#define OMAP4_I2C2_SCL_GLFENB_MASK				(1 << 7)
+#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT				5
+#define OMAP4_I2C2_SCL_LOAD_BITS_MASK				(0x3 << 5)
+#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT				4
+#define OMAP4_I2C2_SCL_PULLUPRESX_MASK				(1 << 4)
+#define OMAP4_I2C1_SCL_GLFENB_SHIFT				3
+#define OMAP4_I2C1_SCL_GLFENB_MASK				(1 << 3)
+#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT				1
+#define OMAP4_I2C1_SCL_LOAD_BITS_MASK				(0x3 << 1)
+#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT				0
+#define OMAP4_I2C1_SCL_PULLUPRESX_MASK				(1 << 0)
+
+/* CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT			31
+#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK			(1 << 31)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT			29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK			(0x3 << 29)
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT			24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK			(0x1f << 24)
+#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT			22
+#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK			(0x3 << 22)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT			21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK			(1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT			19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK			(0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT			18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK			(1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT			16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK			(0x3 << 16)
+
+/* CONTROL_AVDAC */
+#define OMAP4_AVDAC_ACEN_SHIFT					31
+#define OMAP4_AVDAC_ACEN_MASK					(1 << 31)
+#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT				30
+#define OMAP4_AVDAC_TVOUTBYPASS_MASK				(1 << 30)
+#define OMAP4_AVDAC_INPUTINV_SHIFT				29
+#define OMAP4_AVDAC_INPUTINV_MASK				(1 << 29)
+#define OMAP4_AVDAC_CTL_SHIFT					13
+#define OMAP4_AVDAC_CTL_MASK					(0xffff << 13)
+#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT				12
+#define OMAP4_AVDAC_CTL_WR_ACK_MASK				(1 << 12)
+
+/* CONTROL_HDMI_TX_PHY */
+#define OMAP4_HDMITXPHY_PADORDER_SHIFT				31
+#define OMAP4_HDMITXPHY_PADORDER_MASK				(1 << 31)
+#define OMAP4_HDMITXPHY_TXVALID_SHIFT				30
+#define OMAP4_HDMITXPHY_TXVALID_MASK				(1 << 30)
+#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT			29
+#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK			(1 << 29)
+#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT			28
+#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK			(1 << 28)
+
+/* CONTROL_MMC2 */
+#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT			31
+#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK			(1 << 31)
+
+/* CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT				29
+#define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT				24
+#define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT					19
+#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT					14
+#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
+
+/* CONTROL_MCBSPLP */
+#define OMAP4_ALBCTRLRX_FSX_SHIFT				31
+#define OMAP4_ALBCTRLRX_FSX_MASK				(1 << 31)
+#define OMAP4_ALBCTRLRX_CLKX_SHIFT				30
+#define OMAP4_ALBCTRLRX_CLKX_MASK				(1 << 30)
+#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT				29
+#define OMAP4_ABE_MCBSP1_DR_EN_MASK				(1 << 29)
+
+/* CONTROL_USB2PHYCORE */
+#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT			31
+#define OMAP4_USB2PHY_AUTORESUME_EN_MASK			(1 << 31)
+#define OMAP4_USB2PHY_DISCHGDET_SHIFT				30
+#define OMAP4_USB2PHY_DISCHGDET_MASK				(1 << 30)
+#define OMAP4_USB2PHY_GPIOMODE_SHIFT				29
+#define OMAP4_USB2PHY_GPIOMODE_MASK				(1 << 29)
+#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT			28
+#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK			(1 << 28)
+#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT			27
+#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK			(1 << 27)
+#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT			26
+#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK			(1 << 26)
+#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT				25
+#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK				(1 << 25)
+#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT			24
+#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK				(1 << 24)
+#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT			21
+#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK			(0x7 << 21)
+#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT			20
+#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK			(1 << 20)
+#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT			19
+#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK			(1 << 19)
+#define OMAP4_USB2PHY_DATADET_SHIFT				18
+#define OMAP4_USB2PHY_DATADET_MASK				(1 << 18)
+#define OMAP4_USB2PHY_SINKONDP_SHIFT				17
+#define OMAP4_USB2PHY_SINKONDP_MASK				(1 << 17)
+#define OMAP4_USB2PHY_SRCONDM_SHIFT				16
+#define OMAP4_USB2PHY_SRCONDM_MASK				(1 << 16)
+#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT			15
+#define OMAP4_USB2PHY_RESTARTCHGDET_MASK			(1 << 15)
+#define OMAP4_USB2PHY_CHGDETDONE_SHIFT				14
+#define OMAP4_USB2PHY_CHGDETDONE_MASK				(1 << 14)
+#define OMAP4_USB2PHY_CHGDETECTED_SHIFT				13
+#define OMAP4_USB2PHY_CHGDETECTED_MASK				(1 << 13)
+#define OMAP4_USB2PHY_MCPCPUEN_SHIFT				12
+#define OMAP4_USB2PHY_MCPCPUEN_MASK				(1 << 12)
+#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT				11
+#define OMAP4_USB2PHY_MCPCMODEEN_MASK				(1 << 11)
+#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT			10
+#define OMAP4_USB2PHY_RESETDONEMCLK_MASK			(1 << 10)
+#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT			9
+#define OMAP4_USB2PHY_UTMIRESETDONE_MASK			(1 << 9)
+#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT			8
+#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK			(1 << 8)
+#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT			7
+#define OMAP4_USB2PHY_DATAPOLARITYN_MASK			(1 << 7)
+#define OMAP4_USBDPLL_FREQLOCK_SHIFT				6
+#define OMAP4_USBDPLL_FREQLOCK_MASK				(1 << 6)
+#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT			5
+#define OMAP4_USB2PHY_RESETDONETCLK_MASK			(1 << 5)
+
+/* CONTROL_I2C_1 */
+#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT				31
+#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK				(1 << 31)
+#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT			29
+#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK			(0x3 << 29)
+#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT			28
+#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK			(1 << 28)
+#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT				27
+#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK				(1 << 27)
+#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT			25
+#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK			(0x3 << 25)
+#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT			24
+#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK			(1 << 24)
+#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT				23
+#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK				(1 << 23)
+#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT				22
+#define OMAP4_HDMI_DDC_SDA_NMODE_MASK				(1 << 22)
+#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT				21
+#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK				(1 << 21)
+#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT				20
+#define OMAP4_HDMI_DDC_SCL_NMODE_MASK				(1 << 20)
+
+/* CONTROL_MMC1 */
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT			31
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK			(1 << 31)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT			30
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK			(1 << 30)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT			29
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK			(1 << 29)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT			28
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK			(1 << 28)
+#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT			27
+#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK				(1 << 27)
+#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT			26
+#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK				(1 << 26)
+#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT			25
+#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK				(1 << 25)
+#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT				24
+#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK				(1 << 24)
+#define OMAP4_USB_FD_CDEN_SHIFT					23
+#define OMAP4_USB_FD_CDEN_MASK					(1 << 23)
+#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT			22
+#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK				(1 << 22)
+#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT			21
+#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK				(1 << 21)
+
+/* CONTROL_HSI */
+#define OMAP4_HSI1_CALLOOP_SEL_SHIFT				31
+#define OMAP4_HSI1_CALLOOP_SEL_MASK				(1 << 31)
+#define OMAP4_HSI1_CALMUX_SEL_SHIFT				30
+#define OMAP4_HSI1_CALMUX_SEL_MASK				(1 << 30)
+#define OMAP4_HSI2_CALLOOP_SEL_SHIFT				29
+#define OMAP4_HSI2_CALLOOP_SEL_MASK				(1 << 29)
+#define OMAP4_HSI2_CALMUX_SEL_SHIFT				28
+#define OMAP4_HSI2_CALMUX_SEL_MASK				(1 << 28)
+
+/* CONTROL_USB */
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT		31
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK		(1 << 31)
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT		30
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK		(1 << 30)
+
+/* CONTROL_HDQ */
+#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT				31
+#define OMAP4_HDQ_SIO_PWRDNZ_MASK				(1 << 31)
+
+/* CONTROL_LPDDR2IO1_0 */
+#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT				30
+#define OMAP4_LPDDR2IO1_GR4_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR4_I_SHIFT				27
+#define OMAP4_LPDDR2IO1_GR4_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT				25
+#define OMAP4_LPDDR2IO1_GR4_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT				22
+#define OMAP4_LPDDR2IO1_GR3_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR3_I_SHIFT				19
+#define OMAP4_LPDDR2IO1_GR3_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT				17
+#define OMAP4_LPDDR2IO1_GR3_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT				14
+#define OMAP4_LPDDR2IO1_GR2_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR2_I_SHIFT				11
+#define OMAP4_LPDDR2IO1_GR2_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT				9
+#define OMAP4_LPDDR2IO1_GR2_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT				6
+#define OMAP4_LPDDR2IO1_GR1_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO1_GR1_I_SHIFT				3
+#define OMAP4_LPDDR2IO1_GR1_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT				1
+#define OMAP4_LPDDR2IO1_GR1_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO1_1 */
+#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT				30
+#define OMAP4_LPDDR2IO1_GR8_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR8_I_SHIFT				27
+#define OMAP4_LPDDR2IO1_GR8_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT				25
+#define OMAP4_LPDDR2IO1_GR8_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT				22
+#define OMAP4_LPDDR2IO1_GR7_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR7_I_SHIFT				19
+#define OMAP4_LPDDR2IO1_GR7_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT				17
+#define OMAP4_LPDDR2IO1_GR7_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT				14
+#define OMAP4_LPDDR2IO1_GR6_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR6_I_SHIFT				11
+#define OMAP4_LPDDR2IO1_GR6_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT				9
+#define OMAP4_LPDDR2IO1_GR6_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT				6
+#define OMAP4_LPDDR2IO1_GR5_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO1_GR5_I_SHIFT				3
+#define OMAP4_LPDDR2IO1_GR5_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT				1
+#define OMAP4_LPDDR2IO1_GR5_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO1_2 */
+#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT				30
+#define OMAP4_LPDDR2IO1_GR11_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR11_I_SHIFT				27
+#define OMAP4_LPDDR2IO1_GR11_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT				25
+#define OMAP4_LPDDR2IO1_GR11_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT				22
+#define OMAP4_LPDDR2IO1_GR10_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR10_I_SHIFT				19
+#define OMAP4_LPDDR2IO1_GR10_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT				17
+#define OMAP4_LPDDR2IO1_GR10_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT				14
+#define OMAP4_LPDDR2IO1_GR9_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR9_I_SHIFT				11
+#define OMAP4_LPDDR2IO1_GR9_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT				9
+#define OMAP4_LPDDR2IO1_GR9_WD_MASK				(0x3 << 9)
+
+/* CONTROL_LPDDR2IO1_3 */
+#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT			31
+#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK			(1 << 31)
+#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT			30
+#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK			(1 << 30)
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT			29
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK			(1 << 29)
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT			28
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK			(1 << 28)
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT			27
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK			(1 << 27)
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT			26
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK			(1 << 26)
+#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT			25
+#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK				(1 << 25)
+#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT			24
+#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK				(1 << 24)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT			23
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK			(1 << 23)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT			22
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK			(1 << 22)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT			21
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK			(1 << 21)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT			20
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK			(1 << 20)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT			19
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK			(1 << 19)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT			18
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK			(1 << 18)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT			17
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK			(1 << 17)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT			16
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK			(1 << 16)
+#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT			15
+#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK			(1 << 15)
+#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT			14
+#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK			(1 << 14)
+#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT			13
+#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK				(1 << 13)
+#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT			12
+#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK				(1 << 12)
+
+/* CONTROL_LPDDR2IO2_0 */
+#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT				30
+#define OMAP4_LPDDR2IO2_GR4_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR4_I_SHIFT				27
+#define OMAP4_LPDDR2IO2_GR4_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT				25
+#define OMAP4_LPDDR2IO2_GR4_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT				22
+#define OMAP4_LPDDR2IO2_GR3_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR3_I_SHIFT				19
+#define OMAP4_LPDDR2IO2_GR3_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT				17
+#define OMAP4_LPDDR2IO2_GR3_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT				14
+#define OMAP4_LPDDR2IO2_GR2_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR2_I_SHIFT				11
+#define OMAP4_LPDDR2IO2_GR2_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT				9
+#define OMAP4_LPDDR2IO2_GR2_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT				6
+#define OMAP4_LPDDR2IO2_GR1_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO2_GR1_I_SHIFT				3
+#define OMAP4_LPDDR2IO2_GR1_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT				1
+#define OMAP4_LPDDR2IO2_GR1_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO2_1 */
+#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT				30
+#define OMAP4_LPDDR2IO2_GR8_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR8_I_SHIFT				27
+#define OMAP4_LPDDR2IO2_GR8_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT				25
+#define OMAP4_LPDDR2IO2_GR8_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT				22
+#define OMAP4_LPDDR2IO2_GR7_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR7_I_SHIFT				19
+#define OMAP4_LPDDR2IO2_GR7_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT				17
+#define OMAP4_LPDDR2IO2_GR7_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT				14
+#define OMAP4_LPDDR2IO2_GR6_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR6_I_SHIFT				11
+#define OMAP4_LPDDR2IO2_GR6_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT				9
+#define OMAP4_LPDDR2IO2_GR6_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT				6
+#define OMAP4_LPDDR2IO2_GR5_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO2_GR5_I_SHIFT				3
+#define OMAP4_LPDDR2IO2_GR5_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT				1
+#define OMAP4_LPDDR2IO2_GR5_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO2_2 */
+#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT				30
+#define OMAP4_LPDDR2IO2_GR11_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR11_I_SHIFT				27
+#define OMAP4_LPDDR2IO2_GR11_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT				25
+#define OMAP4_LPDDR2IO2_GR11_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT				22
+#define OMAP4_LPDDR2IO2_GR10_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR10_I_SHIFT				19
+#define OMAP4_LPDDR2IO2_GR10_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT				17
+#define OMAP4_LPDDR2IO2_GR10_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT				14
+#define OMAP4_LPDDR2IO2_GR9_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR9_I_SHIFT				11
+#define OMAP4_LPDDR2IO2_GR9_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT				9
+#define OMAP4_LPDDR2IO2_GR9_WD_MASK				(0x3 << 9)
+
+/* CONTROL_LPDDR2IO2_3 */
+#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT			31
+#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK			(1 << 31)
+#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT			30
+#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK			(1 << 30)
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT			29
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK			(1 << 29)
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT			28
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK			(1 << 28)
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT			27
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK			(1 << 27)
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT			26
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK			(1 << 26)
+#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT			25
+#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK				(1 << 25)
+#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT			24
+#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK				(1 << 24)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT			23
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK			(1 << 23)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT			22
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK			(1 << 22)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT			21
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK			(1 << 21)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT			20
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK			(1 << 20)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT			19
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK			(1 << 19)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT			18
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK			(1 << 18)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT			17
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK			(1 << 17)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT			16
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK			(1 << 16)
+#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT			15
+#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK			(1 << 15)
+#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT			14
+#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK			(1 << 14)
+#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT			13
+#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK				(1 << 13)
+#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT			12
+#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK				(1 << 12)
+
+/* CONTROL_BUS_HOLD */
+#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT				31
+#define OMAP4_ABE_DMIC_DIN3_EN_MASK				(1 << 31)
+#define OMAP4_MCSPI1_CS3_EN_SHIFT				30
+#define OMAP4_MCSPI1_CS3_EN_MASK				(1 << 30)
+
+/* CONTROL_C2C */
+#define OMAP4_MIRROR_MODE_EN_SHIFT				31
+#define OMAP4_MIRROR_MODE_EN_MASK				(1 << 31)
+#define OMAP4_C2C_SPARE_SHIFT					24
+#define OMAP4_C2C_SPARE_MASK					(0x7f << 24)
+
+/* CORE_CONTROL_SPARE_RW */
+#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT			0
+#define OMAP4_CORE_CONTROL_SPARE_RW_MASK			(0xffffffff << 0)
+
+/* CORE_CONTROL_SPARE_R */
+#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT			0
+#define OMAP4_CORE_CONTROL_SPARE_R_MASK				(0xffffffff << 0)
+
+/* CORE_CONTROL_SPARE_R_C0 */
+#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT			31
+#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK			(1 << 31)
+#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT			30
+#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK			(1 << 30)
+#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT			29
+#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK			(1 << 29)
+#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT			28
+#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK			(1 << 28)
+#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT			27
+#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK			(1 << 27)
+#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT			26
+#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK			(1 << 26)
+#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT			25
+#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK			(1 << 25)
+#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT			24
+#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK			(1 << 24)
+
+/* CONTROL_EFUSE_1 */
+#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT				24
+#define OMAP4_AVDAC_TRIM_BYTE3_MASK				(0x7f << 24)
+#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT				16
+#define OMAP4_AVDAC_TRIM_BYTE2_MASK				(0xff << 16)
+#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT				8
+#define OMAP4_AVDAC_TRIM_BYTE1_MASK				(0xff << 8)
+#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT				0
+#define OMAP4_AVDAC_TRIM_BYTE0_MASK				(0xff << 0)
+
+/* CONTROL_EFUSE_2 */
+#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT				31
+#define OMAP4_EFUSE_SMART2TEST_P0_MASK				(1 << 31)
+#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT				30
+#define OMAP4_EFUSE_SMART2TEST_P1_MASK				(1 << 30)
+#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT				29
+#define OMAP4_EFUSE_SMART2TEST_P2_MASK				(1 << 29)
+#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT				28
+#define OMAP4_EFUSE_SMART2TEST_P3_MASK				(1 << 28)
+#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT				27
+#define OMAP4_EFUSE_SMART2TEST_N0_MASK				(1 << 27)
+#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT				26
+#define OMAP4_EFUSE_SMART2TEST_N1_MASK				(1 << 26)
+#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT				25
+#define OMAP4_EFUSE_SMART2TEST_N2_MASK				(1 << 25)
+#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT				24
+#define OMAP4_EFUSE_SMART2TEST_N3_MASK				(1 << 24)
+#define OMAP4_LPDDR2_PTV_N1_SHIFT				23
+#define OMAP4_LPDDR2_PTV_N1_MASK				(1 << 23)
+#define OMAP4_LPDDR2_PTV_N2_SHIFT				22
+#define OMAP4_LPDDR2_PTV_N2_MASK				(1 << 22)
+#define OMAP4_LPDDR2_PTV_N3_SHIFT				21
+#define OMAP4_LPDDR2_PTV_N3_MASK				(1 << 21)
+#define OMAP4_LPDDR2_PTV_N4_SHIFT				20
+#define OMAP4_LPDDR2_PTV_N4_MASK				(1 << 20)
+#define OMAP4_LPDDR2_PTV_N5_SHIFT				19
+#define OMAP4_LPDDR2_PTV_N5_MASK				(1 << 19)
+#define OMAP4_LPDDR2_PTV_P1_SHIFT				18
+#define OMAP4_LPDDR2_PTV_P1_MASK				(1 << 18)
+#define OMAP4_LPDDR2_PTV_P2_SHIFT				17
+#define OMAP4_LPDDR2_PTV_P2_MASK				(1 << 17)
+#define OMAP4_LPDDR2_PTV_P3_SHIFT				16
+#define OMAP4_LPDDR2_PTV_P3_MASK				(1 << 16)
+#define OMAP4_LPDDR2_PTV_P4_SHIFT				15
+#define OMAP4_LPDDR2_PTV_P4_MASK				(1 << 15)
+#define OMAP4_LPDDR2_PTV_P5_SHIFT				14
+#define OMAP4_LPDDR2_PTV_P5_MASK				(1 << 14)
+
+/* CONTROL_EFUSE_3 */
+#define OMAP4_STD_FUSE_SPARE_1_SHIFT				24
+#define OMAP4_STD_FUSE_SPARE_1_MASK				(0xff << 24)
+#define OMAP4_STD_FUSE_SPARE_2_SHIFT				16
+#define OMAP4_STD_FUSE_SPARE_2_MASK				(0xff << 16)
+#define OMAP4_STD_FUSE_SPARE_3_SHIFT				8
+#define OMAP4_STD_FUSE_SPARE_3_MASK				(0xff << 8)
+#define OMAP4_STD_FUSE_SPARE_4_SHIFT				0
+#define OMAP4_STD_FUSE_SPARE_4_MASK				(0xff << 0)
+
+/* CONTROL_EFUSE_4 */
+#define OMAP4_STD_FUSE_SPARE_5_SHIFT				24
+#define OMAP4_STD_FUSE_SPARE_5_MASK				(0xff << 24)
+#define OMAP4_STD_FUSE_SPARE_6_SHIFT				16
+#define OMAP4_STD_FUSE_SPARE_6_MASK				(0xff << 16)
+#define OMAP4_STD_FUSE_SPARE_7_SHIFT				8
+#define OMAP4_STD_FUSE_SPARE_7_MASK				(0xff << 8)
+#define OMAP4_STD_FUSE_SPARE_8_SHIFT				0
+#define OMAP4_STD_FUSE_SPARE_8_MASK				(0xff << 0)
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,236 @@
+/*
+ * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_PAD_WKUP					0x4a31e000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION				0x0000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO				0x0004
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG				0x0010
+#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0		0x007c
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0	0x05a0
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1	0x05a4
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE			0x05a8
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR		0x05ac
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO			0x0600
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2			0x0604
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG				0x0608
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS				0x060c
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW		0x0614
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R			0x0618
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0		0x061c
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT				30
+#define OMAP4_IP_REV_SCHEME_MASK				(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT					16
+#define OMAP4_IP_REV_FUNC_MASK					(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT					11
+#define OMAP4_IP_REV_RTL_MASK					(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT				8
+#define OMAP4_IP_REV_MAJOR_MASK					(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT				6
+#define OMAP4_IP_REV_CUSTOM_MASK				(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT				0
+#define OMAP4_IP_REV_MINOR_MASK					(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT					0
+#define OMAP4_IP_HWINFO_MASK					(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT			2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK			(0x3 << 2)
+
+/* PADCONF_WAKEUPEVENT_0 */
+#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT	16
+#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK	(1 << 16)
+#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK			(1 << 13)
+#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT			6
+#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK			(1 << 6)
+#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT			5
+#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK			(1 << 5)
+#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT			3
+#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK			(1 << 3)
+#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK			(1 << 1)
+#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT			0
+#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK			(1 << 0)
+
+/* CONTROL_SMART1NOPMIO_PADCONF_0 */
+#define OMAP4_FREF_DR0_SC_SHIFT					30
+#define OMAP4_FREF_DR0_SC_MASK					(0x3 << 30)
+#define OMAP4_FREF_DR1_SC_SHIFT					28
+#define OMAP4_FREF_DR1_SC_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR4_SC_SHIFT					26
+#define OMAP4_FREF_DR4_SC_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR5_SC_SHIFT					24
+#define OMAP4_FREF_DR5_SC_MASK					(0x3 << 24)
+#define OMAP4_FREF_DR6_SC_SHIFT					22
+#define OMAP4_FREF_DR6_SC_MASK					(0x3 << 22)
+#define OMAP4_FREF_DR7_SC_SHIFT					20
+#define OMAP4_FREF_DR7_SC_MASK					(0x3 << 20)
+#define OMAP4_GPIO_DR7_SC_SHIFT					18
+#define OMAP4_GPIO_DR7_SC_MASK					(0x3 << 18)
+#define OMAP4_DPM_DR0_SC_SHIFT					14
+#define OMAP4_DPM_DR0_SC_MASK					(0x3 << 14)
+#define OMAP4_SIM_DR0_SC_SHIFT					12
+#define OMAP4_SIM_DR0_SC_MASK					(0x3 << 12)
+
+/* CONTROL_SMART1NOPMIO_PADCONF_1 */
+#define OMAP4_FREF_DR0_LB_SHIFT					30
+#define OMAP4_FREF_DR0_LB_MASK					(0x3 << 30)
+#define OMAP4_FREF_DR1_LB_SHIFT					28
+#define OMAP4_FREF_DR1_LB_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR4_LB_SHIFT					26
+#define OMAP4_FREF_DR4_LB_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR5_LB_SHIFT					24
+#define OMAP4_FREF_DR5_LB_MASK					(0x3 << 24)
+#define OMAP4_FREF_DR6_LB_SHIFT					22
+#define OMAP4_FREF_DR6_LB_MASK					(0x3 << 22)
+#define OMAP4_FREF_DR7_LB_SHIFT					20
+#define OMAP4_FREF_DR7_LB_MASK					(0x3 << 20)
+#define OMAP4_GPIO_DR7_LB_SHIFT					18
+#define OMAP4_GPIO_DR7_LB_MASK					(0x3 << 18)
+#define OMAP4_DPM_DR0_LB_SHIFT					14
+#define OMAP4_DPM_DR0_LB_MASK					(0x3 << 14)
+#define OMAP4_SIM_DR0_LB_SHIFT					12
+#define OMAP4_SIM_DR0_LB_MASK					(0x3 << 12)
+
+/* CONTROL_PADCONF_MODE */
+#define OMAP4_VDDS_DV_FREF_SHIFT				31
+#define OMAP4_VDDS_DV_FREF_MASK					(1 << 31)
+#define OMAP4_VDDS_DV_BANK2_SHIFT				30
+#define OMAP4_VDDS_DV_BANK2_MASK				(1 << 30)
+
+/* CONTROL_XTAL_OSCILLATOR */
+#define OMAP4_OSCILLATOR_BOOST_SHIFT				31
+#define OMAP4_OSCILLATOR_BOOST_MASK				(1 << 31)
+#define OMAP4_OSCILLATOR_OS_OUT_SHIFT				30
+#define OMAP4_OSCILLATOR_OS_OUT_MASK				(1 << 30)
+
+/* CONTROL_USIMIO */
+#define OMAP4_PAD_USIM_CLK_LOW_SHIFT				31
+#define OMAP4_PAD_USIM_CLK_LOW_MASK				(1 << 31)
+#define OMAP4_PAD_USIM_RST_LOW_SHIFT				29
+#define OMAP4_PAD_USIM_RST_LOW_MASK				(1 << 29)
+#define OMAP4_USIM_PWRDNZ_SHIFT					28
+#define OMAP4_USIM_PWRDNZ_MASK					(1 << 28)
+
+/* CONTROL_I2C_2 */
+#define OMAP4_SR_SDA_GLFENB_SHIFT				31
+#define OMAP4_SR_SDA_GLFENB_MASK				(1 << 31)
+#define OMAP4_SR_SDA_LOAD_BITS_SHIFT				29
+#define OMAP4_SR_SDA_LOAD_BITS_MASK				(0x3 << 29)
+#define OMAP4_SR_SDA_PULLUPRESX_SHIFT				28
+#define OMAP4_SR_SDA_PULLUPRESX_MASK				(1 << 28)
+#define OMAP4_SR_SCL_GLFENB_SHIFT				27
+#define OMAP4_SR_SCL_GLFENB_MASK				(1 << 27)
+#define OMAP4_SR_SCL_LOAD_BITS_SHIFT				25
+#define OMAP4_SR_SCL_LOAD_BITS_MASK				(0x3 << 25)
+#define OMAP4_SR_SCL_PULLUPRESX_SHIFT				24
+#define OMAP4_SR_SCL_PULLUPRESX_MASK				(1 << 24)
+
+/* CONTROL_JTAG */
+#define OMAP4_JTAG_NTRST_EN_SHIFT				31
+#define OMAP4_JTAG_NTRST_EN_MASK				(1 << 31)
+#define OMAP4_JTAG_TCK_EN_SHIFT					30
+#define OMAP4_JTAG_TCK_EN_MASK					(1 << 30)
+#define OMAP4_JTAG_RTCK_EN_SHIFT				29
+#define OMAP4_JTAG_RTCK_EN_MASK					(1 << 29)
+#define OMAP4_JTAG_TDI_EN_SHIFT					28
+#define OMAP4_JTAG_TDI_EN_MASK					(1 << 28)
+#define OMAP4_JTAG_TDO_EN_SHIFT					27
+#define OMAP4_JTAG_TDO_EN_MASK					(1 << 27)
+
+/* CONTROL_SYS */
+#define OMAP4_SYS_NRESWARM_PIPU_SHIFT				31
+#define OMAP4_SYS_NRESWARM_PIPU_MASK				(1 << 31)
+
+/* WKUP_CONTROL_SPARE_RW */
+#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT			0
+#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK			(0xffffffff << 0)
+
+/* WKUP_CONTROL_SPARE_R */
+#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT			0
+#define OMAP4_WKUP_CONTROL_SPARE_R_MASK				(0xffffffff << 0)
+
+/* WKUP_CONTROL_SPARE_R_C0 */
+#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT			31
+#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK			(1 << 31)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT			30
+#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK			(1 << 30)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT			29
+#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK			(1 << 29)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT			28
+#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK			(1 << 28)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT			27
+#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK			(1 << 27)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT			26
+#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK			(1 << 26)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT			25
+#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK			(1 << 25)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT			24
+#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK			(1 << 24)
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,92 @@
+/*
+ * OMAP44xx CTRL_MODULE_WKUP registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_WKUP				0x4a30c000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_WKUP_IP_REVISION		0x0000
+#define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO		0x0004
+#define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG		0x0010
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0	0x0460
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1	0x0464
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2	0x0468
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_3	0x046c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_4	0x0470
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_5	0x0474
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_6	0x0478
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_7	0x047c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_8	0x0480
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_9	0x0484
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_10	0x0488
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_11	0x048c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_12	0x0490
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_13	0x0494
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_14	0x0498
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_15	0x049c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_16	0x04a0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_17	0x04a4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_18	0x04a8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_19	0x04ac
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_20	0x04b0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_21	0x04b4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_22	0x04b8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_23	0x04bc
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_24	0x04c0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_25	0x04c4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_26	0x04c8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_27	0x04cc
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_28	0x04d0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_29	0x04d4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_30	0x04d8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_31	0x04dc
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT		30
+#define OMAP4_IP_REV_SCHEME_MASK		(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT			16
+#define OMAP4_IP_REV_FUNC_MASK			(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT			11
+#define OMAP4_IP_REV_RTL_MASK			(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT		8
+#define OMAP4_IP_REV_MAJOR_MASK			(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT		6
+#define OMAP4_IP_REV_CUSTOM_MASK		(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT		0
+#define OMAP4_IP_REV_MINOR_MASK			(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT			0
+#define OMAP4_IP_HWINFO_MASK			(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT	2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK	(0x3 << 2)
+
+/* CONF_DEBUG_SEL_TST_0 */
+#define OMAP4_WKUP_MODE_SHIFT			0
+#define OMAP4_WKUP_MODE_MASK				(1 << 0)
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/debug-devices.h linux-libre-3.7-gnu/arch/arm/mach-omap2/debug-devices.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/debug-devices.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/debug-devices.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,9 @@
+#ifndef _OMAP_DEBUG_DEVICES_H
+#define _OMAP_DEBUG_DEVICES_H
+
+#include <linux/types.h>
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/devices.c linux-libre-3.7-gnu/arch/arm/mach-omap2/devices.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/devices.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/devices.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,21 +17,21 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
+#include <linux/platform_data/omap_ocp2scp.h>
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
-#include <asm/pmu.h>
 
 #include "iomap.h"
-#include <plat/board.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
 
+#include "soc.h"
+#include "common.h"
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
@@ -112,7 +112,7 @@
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_24XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };
@@ -201,7 +201,7 @@
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_34XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };
@@ -342,7 +342,7 @@
 
 	oh = omap_hwmod_lookup("dmic");
 	if (!oh) {
-		printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+		pr_err("Could not look up dmic hw_mod\n");
 		return;
 	}
 
@@ -385,7 +385,7 @@
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 {
@@ -434,37 +434,24 @@
 static inline void omap_init_mcspi(void) {}
 #endif
 
-static struct resource omap2_pmu_resource = {
-	.start	= 3,
-	.end	= 3,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct resource omap3_pmu_resource = {
-	.start	= INT_34XX_BENCH_MPU_EMUL,
-	.end	= INT_34XX_BENCH_MPU_EMUL,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device omap_pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= 1,
-};
-
-static void omap_init_pmu(void)
+/**
+ * omap_init_rng - bind the RNG hwmod to the RNG omap_device
+ *
+ * Bind the RNG hwmod to the RNG omap_device.  No return value.
+ */
+static void omap_init_rng(void)
 {
-	if (cpu_is_omap24xx())
-		omap_pmu_device.resource = &omap2_pmu_resource;
-	else if (cpu_is_omap34xx())
-		omap_pmu_device.resource = &omap3_pmu_resource;
-	else
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+
+	oh = omap_hwmod_lookup("rng");
+	if (!oh)
 		return;
 
-	platform_device_register(&omap_pmu_device);
+	pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n");
 }
 
-
 #if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
 
 #ifdef CONFIG_ARCH_OMAP2
@@ -475,7 +462,7 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_24XX_SHA1MD5,
+		.start	= 51 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -493,7 +480,7 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_34XX_SHA1MD52_IRQ,
+		.start	= 49 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
@@ -627,10 +614,91 @@
 static inline void omap_init_vout(void) {}
 #endif
 
+#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE)
+static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
+{
+	int cnt	= 0;
+
+	while (ocp2scp_dev->drv_name != NULL) {
+		cnt++;
+		ocp2scp_dev++;
+	}
+
+	return cnt;
+}
+
+static void omap_init_ocp2scp(void)
+{
+	struct omap_hwmod	*oh;
+	struct platform_device	*pdev;
+	int			bus_id = -1, dev_cnt = 0, i;
+	struct omap_ocp2scp_dev	*ocp2scp_dev;
+	const char		*oh_name, *name;
+	struct omap_ocp2scp_platform_data *pdata;
+
+	if (!cpu_is_omap44xx())
+		return;
+
+	oh_name = "ocp2scp_usb_phy";
+	name	= "omap-ocp2scp";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("%s: could not find omap_hwmod for %s\n", __func__,
+								oh_name);
+		return;
+	}
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("%s: No memory for ocp2scp pdata\n", __func__);
+		return;
+	}
+
+	ocp2scp_dev = oh->dev_attr;
+	dev_cnt = count_ocp2scp_devices(ocp2scp_dev);
+
+	if (!dev_cnt) {
+		pr_err("%s: No devices connected to ocp2scp\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *)
+					* dev_cnt, GFP_KERNEL);
+	if (!pdata->devices) {
+		pr_err("%s: No memory for ocp2scp pdata devices\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	for (i = 0; i < dev_cnt; i++, ocp2scp_dev++)
+		pdata->devices[i] = ocp2scp_dev;
+
+	pdata->dev_cnt	= dev_cnt;
+
+	pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
+								0, false);
+	if (IS_ERR(pdev)) {
+		pr_err("Could not build omap_device for %s %s\n",
+						name, oh_name);
+		kfree(pdata->devices);
+		kfree(pdata);
+		return;
+	}
+}
+#else
+static inline void omap_init_ocp2scp(void) { }
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
 {
+	/* Enable dummy states for those platforms without pinctrl support */
+	if (!of_have_populated_dt())
+		pinctrl_provide_dummies();
+
 	/*
 	 * please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
@@ -645,11 +713,12 @@
 		omap_init_mcpdm();
 		omap_init_mcspi();
 	}
-	omap_init_pmu();
 	omap_init_sti();
+	omap_init_rng();
 	omap_init_sham();
 	omap_init_aes();
 	omap_init_vout();
+	omap_init_ocp2scp();
 
 	return 0;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/display.c linux-libre-3.7-gnu/arch/arm/mach-omap2/display.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/display.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/display.c	2012-12-10 22:30:57.000000000 -0500
@@ -76,14 +76,14 @@
 	const int id;
 };
 
-static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initdata = {
+static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initconst = {
 	{ "dss_core", "omapdss_dss", -1 },
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
 	{ "dss_venc", "omapdss_venc", -1 },
 };
 
-static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
+static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initconst = {
 	{ "dss_core", "omapdss_dss", -1 },
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
@@ -91,11 +91,10 @@
 	{ "dss_dsi1", "omapdss_dsi", 0 },
 };
 
-static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
+static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_core", "omapdss_dss", -1 },
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
 	{ "dss_dsi1", "omapdss_dsi", 0 },
 	{ "dss_dsi2", "omapdss_dsi", 1 },
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
@@ -221,7 +220,7 @@
 
 	ohs[0] = oh;
 	od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
-	if (!od) {
+	if (IS_ERR(od)) {
 		pr_err("Could not alloc omap_device for %s\n", pdev_name);
 		r = -ENOMEM;
 		goto err;
@@ -488,7 +487,7 @@
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk)
-			clk_enable(oc->_clk);
+			clk_prepare_enable(oc->_clk);
 
 	dispc_disable_outputs();
 
@@ -515,7 +514,7 @@
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk)
-			clk_disable(oc->_clk);
+			clk_disable_unprepare(oc->_clk);
 
 	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/dpll3xxx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/dpll3xxx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/dpll3xxx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/dpll3xxx.c	2012-12-10 22:30:57.000000000 -0500
@@ -28,9 +28,9 @@
 #include <linux/bitops.h>
 #include <linux/clkdev.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
@@ -63,8 +63,10 @@
 	const struct dpll_data *dd;
 	int i = 0;
 	int ret = -EINVAL;
+	const char *clk_name;
 
 	dd = clk->dpll_data;
+	clk_name = __clk_get_name(clk);
 
 	state <<= __ffs(dd->idlest_mask);
 
@@ -76,10 +78,10 @@
 
 	if (i == MAX_DPLL_WAIT_TRIES) {
 		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
+		       clk_name, (state) ? "locked" : "bypassed");
 	} else {
 		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
+			 clk_name, (state) ? "locked" : "bypassed", i);
 
 		ret = 0;
 	}
@@ -93,7 +95,7 @@
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = clk->dpll_data->clk_ref->rate / n;
+	fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
 
 	pr_debug("clock: fint is %lu\n", fint);
 
@@ -140,7 +142,7 @@
 	u8 state = 1;
 	int r = 0;
 
-	pr_debug("clock: locking DPLL %s\n", clk->name);
+	pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk));
 
 	dd = clk->dpll_data;
 	state <<= __ffs(dd->idlest_mask);
@@ -187,7 +189,7 @@
 		return -EINVAL;
 
 	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
+		 __clk_get_name(clk));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -217,7 +219,7 @@
 	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
 		return -EINVAL;
 
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
+	pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -245,7 +247,7 @@
 {
 	unsigned long fint, clkinp; /* watch out for overflow */
 
-	clkinp = clk->parent->rate;
+	clkinp = __clk_get_rate(__clk_get_parent(clk));
 	fint = (clkinp / n) * m;
 
 	if (fint < 1000000000)
@@ -271,7 +273,7 @@
 	unsigned long clkinp, sd; /* watch out for overflow */
 	int mod1, mod2;
 
-	clkinp = clk->parent->rate;
+	clkinp = __clk_get_rate(__clk_get_parent(clk));
 
 	/*
 	 * target sigma-delta to near 250MHz
@@ -311,7 +313,7 @@
 	 * Set jitter correction. No jitter correction for OMAP4 and 3630
 	 * since freqsel field is no longer present
 	 */
-	if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+	if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
 		v = __raw_readl(dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
@@ -380,16 +382,19 @@
 {
 	int r;
 	struct dpll_data *dd;
+	struct clk *parent;
 
 	dd = clk->dpll_data;
 	if (!dd)
 		return -EINVAL;
 
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
+	parent = __clk_get_parent(clk);
+
+	if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) {
+		WARN_ON(parent != dd->clk_bypass);
 		r = _omap3_noncore_dpll_bypass(clk);
 	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
+		WARN_ON(parent != dd->clk_ref);
 		r = _omap3_noncore_dpll_lock(clk);
 	}
 	/*
@@ -432,7 +437,7 @@
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk *new_parent = NULL;
-	unsigned long hw_rate;
+	unsigned long hw_rate, bypass_rate;
 	u16 freqsel = 0;
 	struct dpll_data *dd;
 	int ret;
@@ -456,7 +461,8 @@
 	omap2_clk_enable(dd->clk_bypass);
 	omap2_clk_enable(dd->clk_ref);
 
-	if (dd->clk_bypass->rate == rate &&
+	bypass_rate = __clk_get_rate(dd->clk_bypass);
+	if (bypass_rate == rate &&
 	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
 		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
 
@@ -471,7 +477,7 @@
 			return -EINVAL;
 
 		/* No freqsel on OMAP4 and OMAP3630 */
-		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+		if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			if (!freqsel)
@@ -479,7 +485,7 @@
 		}
 
 		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
+			 __clk_get_name(clk), rate);
 
 		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
 						 dd->last_rounded_n, freqsel);
@@ -557,7 +563,7 @@
 
 	if (!dd->autoidle_reg) {
 		pr_debug("clock: DPLL %s: autoidle not supported\n",
-			clk->name);
+			__clk_get_name(clk));
 		return;
 	}
 
@@ -591,7 +597,7 @@
 
 	if (!dd->autoidle_reg) {
 		pr_debug("clock: DPLL %s: autoidle not supported\n",
-			clk->name);
+			__clk_get_name(clk));
 		return;
 	}
 
@@ -617,25 +623,30 @@
 	unsigned long rate;
 	u32 v;
 	struct clk *pclk;
+	unsigned long parent_rate;
 
 	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
+	pclk = __clk_get_parent(clk);
 	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
+		pclk = __clk_get_parent(pclk);
 
-	/* clk does not have a DPLL as a parent? */
-	WARN_ON(!pclk);
+	/* clk does not have a DPLL as a parent?  error in the clock data */
+	if (!pclk) {
+		WARN_ON(1);
+		return 0;
+	}
 
 	dd = pclk->dpll_data;
 
 	WARN_ON(!dd->enable_mask);
 
+	parent_rate = __clk_get_rate(__clk_get_parent(clk));
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
-		rate = clk->parent->rate;
+		rate = parent_rate;
 	else
-		rate = clk->parent->rate * 2;
+		rate = parent_rate * 2;
 	return rate;
 }
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/dpll44xx.c linux-libre-3.7-gnu/arch/arm/mach-omap2/dpll44xx.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/dpll44xx.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/dpll44xx.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,9 +15,9 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock44xx.h"
 #include "cm-regbits-44xx.h"
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/dsp.c linux-libre-3.7-gnu/arch/arm/mach-omap2/dsp.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/dsp.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/dsp.c	2012-12-10 22:30:57.000000000 -0500
@@ -30,7 +30,7 @@
 #include <plat/omap-pm.h>
 #endif
 
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
 
 static struct platform_device *omap_dsp_pdev;
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/emu.c linux-libre-3.7-gnu/arch/arm/mach-omap2/emu.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/emu.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/emu.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,8 +21,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <mach/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 
 MODULE_LICENSE("GPL");
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpio.c linux-libre-3.7-gnu/arch/arm/mach-omap2/gpio.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpio.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpio.c	2012-12-10 22:30:57.000000000 -0500
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -60,6 +61,7 @@
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
 	if (!pdata->regs) {
 		pr_err("gpio%d: Memory allocation failed\n", id);
+		kfree(pdata);
 		return -ENOMEM;
 	}
 
@@ -121,6 +123,7 @@
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
+		kfree(pdata->regs);
 		kfree(pdata);
 		return -EINVAL;
 	}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc.c linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc.c	2012-12-10 22:30:57.000000000 -0500
@@ -24,11 +24,20 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
 #include <plat/gpmc.h>
 
+#include <plat/cpu.h>
+#include <plat/gpmc.h>
 #include <plat/sdrc.h>
+#include <plat/omap_device.h>
+
+#include "soc.h"
+#include "common.h"
+
+#define	DEVICE_NAME		"omap-gpmc"
 
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00
@@ -78,6 +87,21 @@
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
 
+#define	GPMC_REVISION_MAJOR(l)		((l >> 4) & 0xf)
+#define	GPMC_REVISION_MINOR(l)		(l & 0xf)
+
+#define	GPMC_HAS_WR_ACCESS		0x1
+#define	GPMC_HAS_WR_DATA_MUX_BUS	0x2
+
+/* XXX: Only NAND irq has been considered,currently these are the only ones used
+ */
+#define	GPMC_NR_IRQ		2
+
+struct gpmc_client_irq	{
+	unsigned		irq;
+	u32			bitmask;
+};
+
 /* Structure to save gpmc cs context */
 struct gpmc_cs_config {
 	u32 config1;
@@ -105,12 +129,19 @@
 	struct gpmc_cs_config cs_context[GPMC_CS_NUM];
 };
 
+static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
+static struct irq_chip gpmc_irq_chip;
+static unsigned gpmc_irq_start;
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
 static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
-
+static struct device *gpmc_dev;
+static int gpmc_irq;
+static resource_size_t phys_base, mem_size;
+static unsigned gpmc_capability;
 static void __iomem *gpmc_base;
 
 static struct clk *gpmc_l3_clk;
@@ -279,7 +310,7 @@
 
 	div = gpmc_cs_calc_divider(cs, t->sync_clk);
 	if (div < 0)
-		return -1;
+		return div;
 
 	GPMC_SET_ONE(GPMC_CS_CONFIG2,  0,  3, cs_on);
 	GPMC_SET_ONE(GPMC_CS_CONFIG2,  8, 12, cs_rd_off);
@@ -300,10 +331,10 @@
 
 	GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
 
-	if (cpu_is_omap34xx()) {
+	if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
 		GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+	if (gpmc_capability & GPMC_HAS_WR_ACCESS)
 		GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
-	}
 
 	/* caller is expected to have initialized CONFIG1 to cover
 	 * at least sync vs async
@@ -413,6 +444,20 @@
 	return r;
 }
 
+static int gpmc_cs_delete_mem(int cs)
+{
+	struct resource	*res = &gpmc_cs_mem[cs];
+	int r;
+
+	spin_lock(&gpmc_mem_lock);
+	r = release_resource(&gpmc_cs_mem[cs]);
+	res->start = 0;
+	res->end = 0;
+	spin_unlock(&gpmc_mem_lock);
+
+	return r;
+}
+
 int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 {
 	struct resource *res = &gpmc_cs_mem[cs];
@@ -682,9 +727,150 @@
 }
 EXPORT_SYMBOL(gpmc_prefetch_reset);
 
-static void __init gpmc_mem_init(void)
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+	reg->gpmc_status = gpmc_base + GPMC_STATUS;
+	reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
+	reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
+	reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
+	reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
+	reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
+	reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
+	reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
+	reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
+	reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
+	reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
+	reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
+	reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+}
+
+int gpmc_get_client_irq(unsigned irq_config)
+{
+	int i;
+
+	if (hweight32(irq_config) > 1)
+		return 0;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (gpmc_client_irq[i].bitmask & irq_config)
+			return gpmc_client_irq[i].irq;
+
+	return 0;
+}
+
+static int gpmc_irq_endis(unsigned irq, bool endis)
+{
+	int i;
+	u32 regval;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (irq == gpmc_client_irq[i].irq) {
+			regval = gpmc_read_reg(GPMC_IRQENABLE);
+			if (endis)
+				regval |= gpmc_client_irq[i].bitmask;
+			else
+				regval &= ~gpmc_client_irq[i].bitmask;
+			gpmc_write_reg(GPMC_IRQENABLE, regval);
+			break;
+		}
+
+	return 0;
+}
+
+static void gpmc_irq_disable(struct irq_data *p)
+{
+	gpmc_irq_endis(p->irq, false);
+}
+
+static void gpmc_irq_enable(struct irq_data *p)
+{
+	gpmc_irq_endis(p->irq, true);
+}
+
+static void gpmc_irq_noop(struct irq_data *data) { }
+
+static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+
+static int gpmc_setup_irq(void)
+{
+	int i;
+	u32 regval;
+
+	if (!gpmc_irq)
+		return -EINVAL;
+
+	gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
+	if (IS_ERR_VALUE(gpmc_irq_start)) {
+		pr_err("irq_alloc_descs failed\n");
+		return gpmc_irq_start;
+	}
+
+	gpmc_irq_chip.name = "gpmc";
+	gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
+	gpmc_irq_chip.irq_enable = gpmc_irq_enable;
+	gpmc_irq_chip.irq_disable = gpmc_irq_disable;
+	gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
+	gpmc_irq_chip.irq_ack = gpmc_irq_noop;
+	gpmc_irq_chip.irq_mask = gpmc_irq_noop;
+	gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
+
+	gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
+	gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++) {
+		gpmc_client_irq[i].irq = gpmc_irq_start + i;
+		irq_set_chip_and_handler(gpmc_client_irq[i].irq,
+					&gpmc_irq_chip, handle_simple_irq);
+		set_irq_flags(gpmc_client_irq[i].irq,
+				IRQF_VALID | IRQF_NOAUTOEN);
+	}
+
+	/* Disable interrupts */
+	gpmc_write_reg(GPMC_IRQENABLE, 0);
+
+	/* clear interrupts */
+	regval = gpmc_read_reg(GPMC_IRQSTATUS);
+	gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+	return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+}
+
+static __devexit int gpmc_free_irq(void)
+{
+	int i;
+
+	if (gpmc_irq)
+		free_irq(gpmc_irq, NULL);
+
+	for (i = 0; i < GPMC_NR_IRQ; i++) {
+		irq_set_handler(gpmc_client_irq[i].irq, NULL);
+		irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip);
+		irq_modify_status(gpmc_client_irq[i].irq, 0, 0);
+	}
+
+	irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ);
+
+	return 0;
+}
+
+static void __devexit gpmc_mem_exit(void)
 {
 	int cs;
+
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		if (!gpmc_cs_mem_enabled(cs))
+			continue;
+		gpmc_cs_delete_mem(cs);
+	}
+
+}
+
+static int __devinit gpmc_mem_init(void)
+{
+	int cs, rc;
 	unsigned long boot_rom_space = 0;
 
 	/* never allocate the first page, to facilitate bug detection;
@@ -704,88 +890,139 @@
 		if (!gpmc_cs_mem_enabled(cs))
 			continue;
 		gpmc_cs_get_memconf(cs, &base, &size);
-		if (gpmc_cs_insert_mem(cs, base, size) < 0)
-			BUG();
+		rc = gpmc_cs_insert_mem(cs, base, size);
+		if (IS_ERR_VALUE(rc)) {
+			while (--cs >= 0)
+				if (gpmc_cs_mem_enabled(cs))
+					gpmc_cs_delete_mem(cs);
+			return rc;
+		}
 	}
+
+	return 0;
 }
 
-static int __init gpmc_init(void)
+static __devinit int gpmc_probe(struct platform_device *pdev)
 {
-	u32 l, irq;
-	int cs, ret = -EINVAL;
-	int gpmc_irq;
-	char *ck = NULL;
+	int rc;
+	u32 l;
+	struct resource *res;
 
-	if (cpu_is_omap24xx()) {
-		ck = "core_l3_ck";
-		if (cpu_is_omap2420())
-			l = OMAP2420_GPMC_BASE;
-		else
-			l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap34xx()) {
-		ck = "gpmc_fck";
-		l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
-		/* Base address and irq number are same for OMAP4/5 */
-		ck = "gpmc_ck";
-		l = OMAP44XX_GPMC_BASE;
-		gpmc_irq = OMAP44XX_IRQ_GPMC;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -ENOENT;
+
+	phys_base = res->start;
+	mem_size = resource_size(res);
+
+	gpmc_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!gpmc_base) {
+		dev_err(&pdev->dev, "error: request memory / ioremap\n");
+		return -EADDRNOTAVAIL;
 	}
 
-	if (WARN_ON(!ck))
-		return ret;
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL)
+		dev_warn(&pdev->dev, "Failed to get resource: irq\n");
+	else
+		gpmc_irq = res->start;
 
-	gpmc_l3_clk = clk_get(NULL, ck);
+	gpmc_l3_clk = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(gpmc_l3_clk)) {
-		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
-		BUG();
+		dev_err(&pdev->dev, "error: clk_get\n");
+		gpmc_irq = 0;
+		return PTR_ERR(gpmc_l3_clk);
 	}
 
-	gpmc_base = ioremap(l, SZ_4K);
-	if (!gpmc_base) {
-		clk_put(gpmc_l3_clk);
-		printk(KERN_ERR "Could not get GPMC register memory\n");
-		BUG();
-	}
+	clk_prepare_enable(gpmc_l3_clk);
 
-	clk_enable(gpmc_l3_clk);
+	gpmc_dev = &pdev->dev;
 
 	l = gpmc_read_reg(GPMC_REVISION);
-	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
-	/* Set smart idle mode and automatic L3 clock gating */
-	l = gpmc_read_reg(GPMC_SYSCONFIG);
-	l &= 0x03 << 3;
-	l |= (0x02 << 3) | (1 << 0);
-	gpmc_write_reg(GPMC_SYSCONFIG, l);
-	gpmc_mem_init();
+	if (GPMC_REVISION_MAJOR(l) > 0x4)
+		gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+	dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
+		 GPMC_REVISION_MINOR(l));
 
-	/* initalize the irq_chained */
-	irq = OMAP_GPMC_IRQ_BASE;
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		irq_set_chip_and_handler(irq, &dummy_irq_chip,
-						handle_simple_irq);
-		set_irq_flags(irq, IRQF_VALID);
-		irq++;
+	rc = gpmc_mem_init();
+	if (IS_ERR_VALUE(rc)) {
+		clk_disable_unprepare(gpmc_l3_clk);
+		clk_put(gpmc_l3_clk);
+		dev_err(gpmc_dev, "failed to reserve memory\n");
+		return rc;
 	}
 
-	ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
-	if (ret)
-		pr_err("gpmc: irq-%d could not claim: err %d\n",
-						gpmc_irq, ret);
-	return ret;
+	if (IS_ERR_VALUE(gpmc_setup_irq()))
+		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
+
+	return 0;
+}
+
+static __devexit int gpmc_remove(struct platform_device *pdev)
+{
+	gpmc_free_irq();
+	gpmc_mem_exit();
+	gpmc_dev = NULL;
+	return 0;
 }
+
+static struct platform_driver gpmc_driver = {
+	.probe		= gpmc_probe,
+	.remove		= __devexit_p(gpmc_remove),
+	.driver		= {
+		.name	= DEVICE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static __init int gpmc_init(void)
+{
+	return platform_driver_register(&gpmc_driver);
+}
+
+static __exit void gpmc_exit(void)
+{
+	platform_driver_unregister(&gpmc_driver);
+
+}
+
 postcore_initcall(gpmc_init);
+module_exit(gpmc_exit);
+
+static int __init omap_gpmc_init(void)
+{
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+	char *oh_name = "gpmc";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return -ENODEV;
+	}
+
+	pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
+
+	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+}
+postcore_initcall(omap_gpmc_init);
 
 static irqreturn_t gpmc_handle_irq(int irq, void *dev)
 {
-	u8 cs;
+	int i;
+	u32 regval;
 
-	/* check cs to invoke the irq */
-	cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
-	if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
-		generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
+	regval = gpmc_read_reg(GPMC_IRQSTATUS);
+
+	if (!regval)
+		return IRQ_NONE;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (regval & gpmc_client_irq[i].bitmask)
+			generic_handle_irq(gpmc_client_irq[i].irq);
+
+	gpmc_write_reg(GPMC_IRQSTATUS, regval);
 
 	return IRQ_HANDLED;
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-nand.c linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-nand.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-nand.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-nand.c	2012-12-10 22:30:57.000000000 -0500
@@ -13,23 +13,31 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 
 #include <asm/mach/flash.h>
 
-#include <plat/cpu.h>
-#include <plat/nand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
 
-static struct resource gpmc_nand_resource = {
-	.flags		= IORESOURCE_MEM,
+#include "soc.h"
+
+static struct resource gpmc_nand_resource[] = {
+	{
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device gpmc_nand_device = {
 	.name		= "omap2-nand",
 	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &gpmc_nand_resource,
+	.num_resources	= ARRAY_SIZE(gpmc_nand_resource),
+	.resource	= gpmc_nand_resource,
 };
 
 static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
@@ -75,6 +83,7 @@
 		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
 	gpmc_cs_configure(gpmc_nand_data->cs,
 			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
+	gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
 	if (err)
 		return err;
@@ -90,12 +99,19 @@
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-				&gpmc_nand_data->phys_base);
+				(unsigned long *)&gpmc_nand_resource[0].start);
 	if (err < 0) {
 		dev_err(dev, "Cannot request GPMC CS\n");
 		return err;
 	}
 
+	gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
+							NAND_IO_SIZE - 1;
+
+	gpmc_nand_resource[1].start =
+				gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+	gpmc_nand_resource[2].start =
+				gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 	 /* Set timings in GPMC */
 	err = omap2_nand_gpmc_retime(gpmc_nand_data);
 	if (err < 0) {
@@ -108,6 +124,8 @@
 		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
 	}
 
+	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+
 	err = platform_device_register(&gpmc_nand_device);
 	if (err < 0) {
 		dev_err(dev, "Unable to register NAND device\n");
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-onenand.c linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-onenand.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-onenand.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-onenand.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,19 +15,27 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/onenand_regs.h>
 #include <linux/io.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include <asm/mach/flash.h>
 
-#include <plat/cpu.h>
-#include <plat/onenand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
 
+#include "soc.h"
+
+#define	ONENAND_IO_SIZE	SZ_128K
+
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 
+static struct resource gpmc_onenand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
 static struct platform_device gpmc_onenand_device = {
 	.name		= "omap2-onenand",
 	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &gpmc_onenand_resource,
 };
 
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
@@ -390,6 +398,8 @@
 
 void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
+	int err;
+
 	gpmc_onenand_data = _onenand_data;
 	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
 	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
@@ -401,8 +411,19 @@
 		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 	}
 
+	err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
+				(unsigned long *)&gpmc_onenand_resource.start);
+	if (err < 0) {
+		pr_err("%s: Cannot request GPMC CS\n", __func__);
+		return;
+	}
+
+	gpmc_onenand_resource.end = gpmc_onenand_resource.start +
+							ONENAND_IO_SIZE - 1;
+
 	if (platform_device_register(&gpmc_onenand_device) < 0) {
-		printk(KERN_ERR "Unable to register OneNAND device\n");
+		pr_err("%s: Unable to register OneNAND device\n", __func__);
+		gpmc_cs_free(gpmc_onenand_data->cs);
 		return;
 	}
 }
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smc91x.c linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smc91x.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smc91x.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smc91x.c	2012-12-10 22:30:57.000000000 -0500
@@ -17,9 +17,10 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <plat/board.h>
 #include <plat/gpmc.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
+
+#include "soc.h"
 
 static struct omap_smc91x_platform_data *gpmc_cfg;
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smc91x.h linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smc91x.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smc91x.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smc91x.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96	(1 << 4)
+#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_pwrdwn;
+	int	gpio_reset;
+	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
+	u32	flags;
+	int	(*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+	defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data	NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smsc911x.c linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smsc911x.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smsc911x.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smsc911x.c	2012-12-10 22:30:57.000000000 -0500
@@ -20,9 +20,8 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 
-#include <plat/board.h>
 #include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct resource gpmc_smsc911x_resources[] = {
 	[0] = {
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smsc911x.h linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smsc911x.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/gpmc-smsc911x.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/gpmc-smsc911x.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+ *
+ * Copyright (C) 2009 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
+
+struct omap_smsc911x_platform_data {
+	int	id;
+	int	cs;
+	int	gpio_irq;
+	int	gpio_reset;
+	u32	flags;
+};
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
+
+#else
+
+static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/hdq1w.c linux-libre-3.7-gnu/arch/arm/mach-omap2/hdq1w.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/hdq1w.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/hdq1w.c	2012-12-10 22:30:57.000000000 -0500
@@ -29,7 +29,7 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
-#include <plat/hdq1w.h>
+#include "hdq1w.h"
 
 #include "common.h"
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/hdq1w.h linux-libre-3.7-gnu/arch/arm/mach-omap2/hdq1w.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/hdq1w.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/hdq1w.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,36 @@
+/*
+ * Shared macros and function prototypes for the HDQ1W/1-wire IP block
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
+#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
+
+#include <plat/omap_hwmod.h>
+
+/*
+ * XXX A future cleanup patch should modify
+ * drivers/w1/masters/omap_hdq.c to use these macros
+ */
+#define HDQ_CTRL_STATUS_OFFSET			0x0c
+#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT	5
+
+
+extern int omap_hdq1w_reset(struct omap_hwmod *oh);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/hsmmc.c linux-libre-3.7-gnu/arch/arm/mach-omap2/hsmmc.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/hsmmc.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/hsmmc.c	2012-12-10 22:30:57.000000000 -0500
@@ -15,9 +15,10 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <mach/hardware.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
-#include <plat/mux.h>
 #include <plat/omap_device.h>
 
 #include "mux.h"
@@ -522,7 +523,7 @@
 	dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
 
 	od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
-	if (!od) {
+	if (IS_ERR(od)) {
 		pr_err("Could not allocate od for %s\n", name);
 		goto put_pdev;
 	}
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/i2c.c linux-libre-3.7-gnu/arch/arm/mach-omap2/i2c.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/i2c.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/i2c.c	2012-12-10 22:30:57.000000000 -0500
@@ -19,7 +19,6 @@
  *
  */
 
-#include <plat/cpu.h>
 #include <plat/i2c.h>
 #include "common.h"
 #include <plat/omap_hwmod.h>
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/id.c linux-libre-3.7-gnu/arch/arm/mach-omap2/id.c
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/id.c	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/id.c	2012-12-10 22:30:57.000000000 -0500
@@ -22,10 +22,10 @@
 #include <asm/cputype.h>
 
 #include "common.h"
-#include <plat/cpu.h>
 
-#include <mach/id.h>
+#include "id.h"
 
+#include "soc.h"
 #include "control.h"
 
 static unsigned int omap_revision;
@@ -161,9 +161,8 @@
 	}
 
 	if (j == ARRAY_SIZE(omap_ids)) {
-		printk(KERN_ERR "Unknown OMAP device type. "
-				"Handling it as OMAP%04x\n",
-				omap_ids[i].type >> 16);
+		pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
+		       omap_ids[i].type >> 16);
 		j = i;
 	}
 
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/id.h linux-libre-3.7-gnu/arch/arm/mach-omap2/id.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/id.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/id.h	2012-12-10 22:30:57.000000000 -0500
@@ -0,0 +1,22 @@
+/*
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP2_ARCH_ID_H
+#define OMAP2_ARCH_ID_H
+
+struct omap_die_id {
+	u32 id_0;
+	u32 id_1;
+	u32 id_2;
+	u32 id_3;
+};
+
+void omap_get_die_id(struct omap_die_id *odi);
+
+#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/am35xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/am35xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/am35xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/am35xx.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,46 +0,0 @@
-/*:
- * Address mappings and base address for AM35XX specific interconnects
- * and peripherals.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Sriramakrishnan <srk@ti.com>
- *	   Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_AM35XX_H
-#define __ASM_ARCH_AM35XX_H
-
-/*
- * Base addresses
- *	Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
- */
-#define AM35XX_IPSS_EMAC_BASE		0x5C000000
-#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
-#define AM35XX_IPSS_HECC_BASE		0x5C050000
-#define AM35XX_IPSS_VPFE_BASE		0x5C060000
-
-
-/* HECC module specifc offset definitions */
-#define AM35XX_HECC_SCC_HECC_OFFSET	(0x0)
-#define AM35XX_HECC_SCC_RAM_OFFSET	(0x3000)
-#define AM35XX_HECC_RAM_OFFSET		(0x3000)
-#define AM35XX_HECC_MBOX_OFFSET		(0x2000)
-#define AM35XX_HECC_INT_LINE		(0x0)
-#define AM35XX_HECC_VERSION		(0x1)
-
-#define AM35XX_EMAC_CNTRL_OFFSET	(0x10000)
-#define AM35XX_EMAC_CNTRL_MOD_OFFSET	(0x0)
-#define AM35XX_EMAC_CNTRL_RAM_OFFSET	(0x20000)
-#define AM35XX_EMAC_MDIO_OFFSET		(0x30000)
-#define AM35XX_IPSS_MDIO_BASE		(AM35XX_IPSS_EMAC_BASE + \
-						AM35XX_EMAC_MDIO_OFFSET)
-#define AM35XX_EMAC_CNTRL_RAM_SIZE	(0x2000)
-#define AM35XX_EMAC_RAM_ADDR		(AM3517_EMAC_BASE + \
-						AM3517_EMAC_CNTRL_RAM_OFFSET)
-#define AM35XX_EMAC_HW_RAM_ADDR		(0x01E20000)
-
-#endif  /*  __ASM_ARCH_AM35XX_H */
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/board-rx51.h linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/board-rx51.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/board-rx51.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/board-rx51.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,11 +0,0 @@
-/*
- * Defines for rx51 boards
- */
-
-#ifndef _OMAP_BOARD_RX51_H
-#define _OMAP_BOARD_RX51_H
-
-extern void __init rx51_peripherals_init(void);
-extern void __init rx51_video_mem_init(void);
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/board-zoom.h linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/board-zoom.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/board-zoom.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/board-zoom.h	2012-12-10 22:30:57.000000000 -0500
@@ -8,5 +8,3 @@
 extern int __init zoom_debugboard_init(void);
 extern void __init zoom_peripherals_init(void);
 extern void __init zoom_display_init(void);
-
-#define ZOOM2_HEADSET_EXTMUTE_GPIO	153
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,392 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_CORE					0x4a002000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_CORE_IP_REVISION			0x0000
-#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO			0x0004
-#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG			0x0010
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0		0x0200
-#define OMAP4_CTRL_MODULE_CORE_ID_CODE				0x0204
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1		0x0208
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2		0x020c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3		0x0210
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0		0x0214
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1		0x0218
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF		0x021c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP		0x0228
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP		0x0260
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0		0x0264
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1		0x0268
-#define OMAP4_CTRL_MODULE_CORE_STATUS				0x02c4
-#define OMAP4_CTRL_MODULE_CORE_DEV_CONF				0x0300
-#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR			0x0304
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL		0x0314
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL		0x0318
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL		0x0320
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL		0x0324
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL	0x0328
-#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR			0x032c
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0		0x0330
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1		0x0334
-#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL			0x033c
-#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL			0x0340
-#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL			0x0350
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL		0x0400
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU			0x0408
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0		0x042c
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1		0x0430
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2		0x0434
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3		0x0438
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0			0x0440
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1			0x0444
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2			0x0448
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL		0x044c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL		0x0450
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL		0x0454
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0		0x0480
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1		0x0484
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2		0x0488
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3		0x048c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4		0x0490
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5		0x0494
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6		0x0498
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7		0x049c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8		0x04a0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9		0x04a4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10		0x04a8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11		0x04ac
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12		0x04b0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13		0x04b4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14		0x04b8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15		0x04bc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16		0x04c0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17		0x04c4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18		0x04c8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19		0x04cc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20		0x04d0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21		0x04d4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22		0x04d8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23		0x04dc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24		0x04e0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25		0x04e4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26		0x04e8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27		0x04ec
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28		0x04f0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29		0x04f4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30		0x04f8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31		0x04fc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT			30
-#define OMAP4_IP_REV_SCHEME_MASK			(0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT				16
-#define OMAP4_IP_REV_FUNC_MASK				(0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT				11
-#define OMAP4_IP_REV_RTL_MASK				(0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT			8
-#define OMAP4_IP_REV_MAJOR_MASK				(0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT			6
-#define OMAP4_IP_REV_CUSTOM_MASK			(0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT			0
-#define OMAP4_IP_REV_MINOR_MASK				(0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT				0
-#define OMAP4_IP_HWINFO_MASK				(0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT		2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK		(0x3 << 2)
-
-/* STD_FUSE_DIE_ID_0 */
-#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_0_MASK			(0xffffffff << 0)
-
-/* ID_CODE */
-#define OMAP4_STD_FUSE_IDCODE_SHIFT			0
-#define OMAP4_STD_FUSE_IDCODE_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_1 */
-#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_1_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_2 */
-#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_2_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_3 */
-#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_3_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_0 */
-#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT			0
-#define OMAP4_STD_FUSE_PROD_ID_0_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_1 */
-#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT			0
-#define OMAP4_STD_FUSE_PROD_ID_1_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_USB_CONF */
-#define OMAP4_USB_PROD_ID_SHIFT				16
-#define OMAP4_USB_PROD_ID_MASK				(0xffff << 16)
-#define OMAP4_USB_VENDOR_ID_SHIFT			0
-#define OMAP4_USB_VENDOR_ID_MASK			(0xffff << 0)
-
-/* STD_FUSE_OPP_VDD_WKUP */
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT		0
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK		(0xffffffff << 0)
-
-/* STD_FUSE_OPP_BGAP */
-#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT			0
-#define OMAP4_STD_FUSE_OPP_BGAP_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_0 */
-#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT			0
-#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_1 */
-#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT			0
-#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK			(0xffffffff << 0)
-
-/* STATUS */
-#define OMAP4_ATTILA_CONF_SHIFT				11
-#define OMAP4_ATTILA_CONF_MASK				(0x3 << 11)
-#define OMAP4_DEVICE_TYPE_SHIFT				8
-#define OMAP4_DEVICE_TYPE_MASK				(0x7 << 8)
-#define OMAP4_SYS_BOOT_SHIFT				0
-#define OMAP4_SYS_BOOT_MASK				(0xff << 0)
-
-/* DEV_CONF */
-#define OMAP4_DEV_CONF_SHIFT				1
-#define OMAP4_DEV_CONF_MASK				(0x7fffffff << 1)
-#define OMAP4_USBPHY_PD_SHIFT				0
-#define OMAP4_USBPHY_PD_MASK				(1 << 0)
-
-/* LDOVBB_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT		21
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT		16
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT		5
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT		0
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOVBB_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT		21
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT		16
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT		5
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT		0
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOSRAM_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT		21
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT		16
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT		5
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT		0
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOSRAM_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT		21
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT		16
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT		5
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT		0
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOSRAM_CORE_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT	26
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT		21
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT	16
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT	10
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT		5
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT	0
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
-
-/* TEMP_SENSOR */
-#define OMAP4_BGAP_TEMPSOFF_SHIFT			12
-#define OMAP4_BGAP_TEMPSOFF_MASK			(1 << 12)
-#define OMAP4_BGAP_TSHUT_SHIFT				11
-#define OMAP4_BGAP_TSHUT_MASK				(1 << 11)
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT		10
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK		(1 << 10)
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT		9
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK			(1 << 9)
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT		8
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK		(1 << 8)
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT		0
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff << 0)
-
-/* DPLL_NWELL_TRIM_0 */
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT	29
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK		(1 << 29)
-#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT			24
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK			(0x1f << 24)
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT	23
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
-#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT			18
-#define OMAP4_DPLL_PER_NWELL_TRIM_MASK			(0x1f << 18)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT	17
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT		12
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK			(0x1f << 12)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT	11
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK		(1 << 11)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT			6
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK			(0x1f << 6)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT	5
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK		(1 << 5)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT			0
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK			(0x1f << 0)
-
-/* DPLL_NWELL_TRIM_1 */
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT	29
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK	(1 << 29)
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT		24
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK		(0x1f << 24)
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT	23
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
-#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT			18
-#define OMAP4_DPLL_USB_NWELL_TRIM_MASK			(0x1f << 18)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT	17
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT		12
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK			(0x1f << 12)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT	11
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK	(1 << 11)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT		6
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK			(0x1f << 6)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT	5
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK	(1 << 5)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT		0
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK			(0x1f << 0)
-
-/* USBOTGHS_CONTROL */
-#define OMAP4_DISCHRGVBUS_SHIFT				8
-#define OMAP4_DISCHRGVBUS_MASK				(1 << 8)
-#define OMAP4_CHRGVBUS_SHIFT				7
-#define OMAP4_CHRGVBUS_MASK				(1 << 7)
-#define OMAP4_DRVVBUS_SHIFT				6
-#define OMAP4_DRVVBUS_MASK				(1 << 6)
-#define OMAP4_IDPULLUP_SHIFT				5
-#define OMAP4_IDPULLUP_MASK				(1 << 5)
-#define OMAP4_IDDIG_SHIFT				4
-#define OMAP4_IDDIG_MASK				(1 << 4)
-#define OMAP4_SESSEND_SHIFT				3
-#define OMAP4_SESSEND_MASK				(1 << 3)
-#define OMAP4_VBUSVALID_SHIFT				2
-#define OMAP4_VBUSVALID_MASK				(1 << 2)
-#define OMAP4_BVALID_SHIFT				1
-#define OMAP4_BVALID_MASK				(1 << 1)
-#define OMAP4_AVALID_SHIFT				0
-#define OMAP4_AVALID_MASK				(1 << 0)
-
-/* DSS_CONTROL */
-#define OMAP4_DSS_MUX6_SELECT_SHIFT			0
-#define OMAP4_DSS_MUX6_SELECT_MASK			(1 << 0)
-
-/* HWOBS_CONTROL */
-#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT			3
-#define OMAP4_HWOBS_CLKDIV_SEL_MASK			(0x1f << 3)
-#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT			2
-#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK			(1 << 2)
-#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT			1
-#define OMAP4_HWOBS_ALL_ONE_MODE_MASK			(1 << 1)
-#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT			0
-#define OMAP4_HWOBS_MACRO_ENABLE_MASK			(1 << 0)
-
-/* DEBOBS_FINAL_MUX_SEL */
-#define OMAP4_SELECT_SHIFT				0
-#define OMAP4_SELECT_MASK				(0xffffffff << 0)
-
-/* DEBOBS_MMR_MPU */
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT		0
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK		(0xf << 0)
-
-/* CONF_SDMA_REQ_SEL0 */
-#define OMAP4_MULT_SHIFT				0
-#define OMAP4_MULT_MASK					(0x7f << 0)
-
-/* CONF_CLK_SEL0 */
-#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT			0
-#define OMAP4_MULT_CONF_CLK_SEL0_MASK			(0x7 << 0)
-
-/* CONF_CLK_SEL1 */
-#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT			0
-#define OMAP4_MULT_CONF_CLK_SEL1_MASK			(0x7 << 0)
-
-/* CONF_CLK_SEL2 */
-#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT			0
-#define OMAP4_MULT_CONF_CLK_SEL2_MASK			(0x7 << 0)
-
-/* CONF_DPLL_FREQLOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT		0
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK		(0x7 << 0)
-
-/* CONF_DPLL_TINITZ_SEL */
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT		0
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK		(0x7 << 0)
-
-/* CONF_DPLL_PHASELOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT	0
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK		(0x7 << 0)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_MODE_SHIFT				0
-#define OMAP4_MODE_MASK					(0xf << 0)
-
-#endif
diff -druN linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
--- linux-libre-3.6-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h	2012-09-30 19:47:46.000000000 -0400
+++ linux-libre-3.7-gnu/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,1409 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE				0x4a100000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION			0x0000
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO			0x0004
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG			0x0010
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0	0x01d8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1	0x01dc
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2	0x01e0
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3	0x01e4
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4	0x01e8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5	0x01ec
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6	0x01f0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL	0x05a0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE		0x05a4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0	0x05a8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1	0x05ac
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0	0x05b0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1	0x05b4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0	0x05b8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1	0x05bc
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2	0x05c0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC		0x05c4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS		0x05c8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE		0x0600
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0		0x0604
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX		0x0608
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC		0x060c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY		0x0610
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2			0x0614
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY		0x0618
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP		0x061c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE		0x0620
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1		0x0624
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1			0x0628
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI			0x062c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB			0x0630
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ			0x0634
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0		0x0638
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1		0x063c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2		0x0640
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3		0x0644
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0		0x0648
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1		0x064c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2		0x0650
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3		0x0654
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD		0x0658
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C			0x065c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW	0x0660
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R		0x0664
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0	0x0668
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1		0x0700
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2		0x0704
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3		0x0708
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4		0x070c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT				30
-#define OMAP4_IP_REV_SCHEME_MASK				(0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT					16
-#define OMAP4_IP_REV_FUNC_MASK					(0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT					11
-#define OMAP4_IP_REV_RTL_MASK					(0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT				8
-#define OMAP4_IP_REV_MAJOR_MASK					(0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT				6
-#define OMAP4_IP_REV_CUSTOM_MASK				(0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT				0
-#define OMAP4_IP_REV_MINOR_MASK					(0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT					0
-#define OMAP4_IP_HWINFO_MASK					(0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT			2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK			(0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_1 */
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_2 */
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	31
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	27
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	14
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 14)
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	13
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	12
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 12)
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	11
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 11)
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	10
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 10)
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	9
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 9)
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	8
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 8)
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	7
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 7)
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	6
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 6)
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	5
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 5)
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	4
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 4)
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	3
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 3)
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	2
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 2)
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	1
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 1)
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT	0
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_3 */
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK			(1 << 16)
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	4
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	3
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_4 */
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	29
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 29)
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	28
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	27
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 27)
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	26
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 26)
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	25
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 25)
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	24
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 24)
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	23
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 23)
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	22
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 22)
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	21
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 21)
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	20
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 20)
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	19
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 19)
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	18
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 18)
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	17
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 17)
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	16
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 16)
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_5 */
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_6 */
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* CONTROL_PADCONF_GLOBAL */
-#define OMAP4_FORCE_OFFMODE_EN_SHIFT				31
-#define OMAP4_FORCE_OFFMODE_EN_MASK				(1 << 31)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_BANK0_SHIFT				31
-#define OMAP4_VDDS_DV_BANK0_MASK				(1 << 31)
-#define OMAP4_VDDS_DV_BANK1_SHIFT				30
-#define OMAP4_VDDS_DV_BANK1_MASK				(1 << 30)
-#define OMAP4_VDDS_DV_BANK3_SHIFT				29
-#define OMAP4_VDDS_DV_BANK3_MASK				(1 << 29)
-#define OMAP4_VDDS_DV_BANK4_SHIFT				28
-#define OMAP4_VDDS_DV_BANK4_MASK				(1 << 28)
-#define OMAP4_VDDS_DV_BANK5_SHIFT				27
-#define OMAP4_VDDS_DV_BANK5_MASK				(1 << 27)
-#define OMAP4_VDDS_DV_BANK6_SHIFT				26
-#define OMAP4_VDDS_DV_BANK6_MASK				(1 << 26)
-#define OMAP4_VDDS_DV_C2C_SHIFT					25
-#define OMAP4_VDDS_DV_C2C_MASK					(1 << 25)
-#define OMAP4_VDDS_DV_CAM_SHIFT					24
-#define OMAP4_VDDS_DV_CAM_MASK					(1 << 24)
-#define OMAP4_VDDS_DV_GPMC_SHIFT				23
-#define OMAP4_VDDS_DV_GPMC_MASK					(1 << 23)
-#define OMAP4_VDDS_DV_SDMMC2_SHIFT				22
-#define OMAP4_VDDS_DV_SDMMC2_MASK				(1 << 22)
-
-/* CONTROL_SMART1IO_PADCONF_0 */
-#define OMAP4_ABE_DR0_SC_SHIFT					30
-#define OMAP4_ABE_DR0_SC_MASK					(0x3 << 30)
-#define OMAP4_CAM_DR0_SC_SHIFT					28
-#define OMAP4_CAM_DR0_SC_MASK					(0x3 << 28)
-#define OMAP4_FREF_DR2_SC_SHIFT					26
-#define OMAP4_FREF_DR2_SC_MASK					(0x3 << 26)
-#define OMAP4_FREF_DR3_SC_SHIFT					24
-#define OMAP4_FREF_DR3_SC_MASK					(0x3 << 24)
-#define OMAP4_GPIO_DR8_SC_SHIFT					22
-#define OMAP4_GPIO_DR8_SC_MASK					(0x3 << 22)
-#define OMAP4_GPIO_DR9_SC_SHIFT					20
-#define OMAP4_GPIO_DR9_SC_MASK					(0x3 << 20)
-#define OMAP4_GPMC_DR2_SC_SHIFT					18
-#define OMAP4_GPMC_DR2_SC_MASK					(0x3 << 18)
-#define OMAP4_GPMC_DR3_SC_SHIFT					16
-#define OMAP4_GPMC_DR3_SC_MASK					(0x3 << 16)
-#define OMAP4_GPMC_DR6_SC_SHIFT					14
-#define OMAP4_GPMC_DR6_SC_MASK					(0x3 << 14)
-#define OMAP4_HDMI_DR0_SC_SHIFT					12
-#define OMAP4_HDMI_DR0_SC_MASK					(0x3 << 12)
-#define OMAP4_MCSPI1_DR0_SC_SHIFT				10
-#define OMAP4_MCSPI1_DR0_SC_MASK				(0x3 << 10)
-#define OMAP4_UART1_DR0_SC_SHIFT				8
-#define OMAP4_UART1_DR0_SC_MASK					(0x3 << 8)
-#define OMAP4_UART3_DR0_SC_SHIFT				6
-#define OMAP4_UART3_DR0_SC_MASK					(0x3 << 6)
-#define OMAP4_UART3_DR1_SC_SHIFT				4
-#define OMAP4_UART3_DR1_SC_MASK					(0x3 << 4)
-#define OMAP4_UNIPRO_DR0_SC_SHIFT				2
-#define OMAP4_UNIPRO_DR0_SC_MASK				(0x3 << 2)
-#define OMAP4_UNIPRO_DR1_SC_SHIFT				0
-#define OMAP4_UNIPRO_DR1_SC_MASK				(0x3 << 0)
-
-/* CONTROL_SMART1IO_PADCONF_1 */
-#define OMAP4_ABE_DR0_LB_SHIFT					30
-#define OMAP4_ABE_DR0_LB_MASK					(0x3 << 30)
-#define OMAP4_CAM_DR0_LB_SHIFT					28
-#define OMAP4_CAM_DR0_LB_MASK					(0x3 << 28)
-#define OMAP4_FREF_DR2_LB_SHIFT					26
-#define OMAP4_FREF_DR2_LB_MASK					(0x3 << 26)
-#define OMAP4_FREF_DR3_LB_SHIFT					24
-#define OMAP4_FREF_DR3_LB_MASK					(0x3 << 24)
-#define OMAP4_GPIO_DR8_LB_SHIFT					22
-#define OMAP4_GPIO_DR8_LB_MASK					(0x3 << 22)
-#define OMAP4_GPIO_DR9_LB_SHIFT					20
-#define OMAP4_GPIO_DR9_LB_MASK					(0x3 << 20)
-#define OMAP4_GPMC_DR2_LB_SHIFT					18
-#define OMAP4_GPMC_DR2_LB_MASK					(0x3 << 18)
-#define OMAP4_GPMC_DR3_LB_SHIFT					16
-#define OMAP4_GPMC_DR3_LB_MASK					(0x3 << 16)
-#define OMAP4_GPMC_DR6_LB_SHIFT					14
-#define OMAP4_GPMC_DR6_LB_MASK					(0x3 << 14)
-#define OMAP4_HDMI_DR0_LB_SHIFT					12
-#define OMAP4_HDMI_DR0_LB_MASK					(0x3 << 12)
-#define OMAP4_MCSPI1_DR0_LB_SHIFT				10
-#define OMAP4_MCSPI1_DR0_LB_MASK				(0x3 << 10)
-#define OMAP4_UART1_DR0_LB_SHIFT				8
-#define OMAP4_UART1_DR0_LB_MASK					(0x3 << 8)
-#define OMAP4_UART3_DR0_LB_SHIFT				6
-#define OMAP4_UART3_DR0_LB_MASK					(0x3 << 6)
-#define OMAP4_UART3_DR1_LB_SHIFT				4
-#define OMAP4_UART3_DR1_LB_MASK					(0x3 << 4)
-#define OMAP4_UNIPRO_DR0_LB_SHIFT				2
-#define OMAP4_UNIPRO_DR0_LB_MASK				(0x3 << 2)
-#define OMAP4_UNIPRO_DR1_LB_SHIFT				0
-#define OMAP4_UNIPRO_DR1_LB_MASK				(0x3 << 0)
-
-/* CONTROL_SMART2IO_PADCONF_0 */
-#define OMAP4_C2C_DR0_LB_SHIFT					31
-#define OMAP4_C2C_DR0_LB_MASK					(1 << 31)
-#define OMAP4_DPM_DR1_LB_SHIFT					30
-#define OMAP4_DPM_DR1_LB_MASK					(1 << 30)
-#define OMAP4_DPM_DR2_LB_SHIFT					29
-#define OMAP4_DPM_DR2_LB_MASK					(1 << 29)
-#define OMAP4_DPM_DR3_LB_SHIFT					28
-#define OMAP4_DPM_DR3_LB_MASK					(1 << 28)
-#define OMAP4_GPIO_DR0_LB_SHIFT					27
-#define OMAP4_GPIO_DR0_LB_MASK					(1 << 27)
-#define OMAP4_GPIO_DR1_LB_SHIFT					26
-#define OMAP4_GPIO_DR1_LB_MASK					(1 << 26)
-#define OMAP4_GPIO_DR10_LB_SHIFT				25
-#define OMAP4_GPIO_DR10_LB_MASK					(1 << 25)
-#define OMAP4_GPIO_DR2_LB_SHIFT					24
-#define OMAP4_GPIO_DR2_LB_MASK					(1 << 24)
-#define OMAP4_GPMC_DR0_LB_SHIFT					23
-#define OMAP4_GPMC_DR0_LB_MASK					(1 << 23)
-#define OMAP4_GPMC_DR1_LB_SHIFT					22
-#define OMAP4_GPMC_DR1_LB_MASK					(1 << 22)
-#define OMAP4_GPMC_DR4_LB_SHIFT					21
-#define OMAP4_GPMC_DR4_LB_MASK					(1 << 21)
-#define OMAP4_GPMC_DR5_LB_SHIFT					20
-#define OMAP4_GPMC_DR5_LB_MASK					(1 << 20)
-#define OMAP4_GPMC_DR7_LB_SHIFT					19
-#define OMAP4_GPMC_DR7_LB_MASK					(1 << 19)
-#define OMAP4_HSI2_DR0_LB_SHIFT					18
-#define OMAP4_HSI2_DR0_LB_MASK					(1 << 18)
-#define OMAP4_HSI2_DR1_LB_SHIFT					17
-#define OMAP4_HSI2_DR1_LB_MASK					(1 << 17)
-#define OMAP4_HSI2_DR2_LB_SHIFT					16
-#define OMAP4_HSI2_DR2_LB_MASK					(1 << 16)
-#define OMAP4_KPD_DR0_LB_SHIFT					15
-#define OMAP4_KPD_DR0_LB_MASK					(1 << 15)
-#define OMAP4_KPD_DR1_LB_SHIFT					14
-#define OMAP4_KPD_DR1_LB_MASK					(1 << 14)
-#define OMAP4_PDM_DR0_LB_SHIFT					13
-#define OMAP4_PDM_DR0_LB_MASK					(1 << 13)
-#define OMAP4_SDMMC2_DR0_LB_SHIFT				12
-#define OMAP4_SDMMC2_DR0_LB_MASK				(1 << 12)
-#define OMAP4_SDMMC3_DR0_LB_SHIFT				11
-#define OMAP4_SDMMC3_DR0_LB_MASK				(1 << 11)
-#define OMAP4_SDMMC4_DR0_LB_SHIFT				10
-#define OMAP4_SDMMC4_DR0_LB_MASK				(1 << 10)
-#define OMAP4_SDMMC4_DR1_LB_SHIFT				9
-#define OMAP4_SDMMC4_DR1_LB_MASK				(1 << 9)
-#define OMAP4_SPI3_DR0_LB_SHIFT					8
-#define OMAP4_SPI3_DR0_LB_MASK					(1 << 8)
-#define OMAP4_SPI3_DR1_LB_SHIFT					7
-#define OMAP4_SPI3_DR1_LB_MASK					(1 << 7)
-#define OMAP4_UART3_DR2_LB_SHIFT				6
-#define OMAP4_UART3_DR2_LB_MASK					(1 << 6)
-#define OMAP4_UART3_DR3_LB_SHIFT				5
-#define OMAP4_UART3_DR3_LB_MASK					(1 << 5)
-#define OMAP4_UART3_DR4_LB_SHIFT				4
-#define OMAP4_UART3_DR4_LB_MASK					(1 << 4)
-#define OMAP4_UART3_DR5_LB_SHIFT				3
-#define OMAP4_UART3_DR5_LB_MASK					(1 << 3)
-#define OMAP4_USBA0_DR1_LB_SHIFT				2
-#define OMAP4_USBA0_DR1_LB_MASK					(1 << 2)
-#define OMAP4_USBA_DR2_LB_SHIFT					1
-#define OMAP4_USBA_DR2_LB_MASK					(1 << 1)
-
-/* CONTROL_SMART2IO_PADCONF_1 */
-#define OMAP4_USBB1_DR0_LB_SHIFT				31
-#define OMAP4_USBB1_DR0_LB_MASK					(1 << 31)
-#define OMAP4_USBB2_DR0_LB_SHIFT				30
-#define OMAP4_USBB2_DR0_LB_MASK					(1 << 30)
-#define OMAP4_USBA0_DR0_LB_SHIFT				29
-#define OMAP4_USBA0_DR0_LB_MASK					(1 << 29)
-
-/* CONTROL_SMART3IO_PADCONF_0 */
-#define OMAP4_DMIC_DR0_MB_SHIFT					30
-#define OMAP4_DMIC_DR0_MB_MASK					(0x3 << 30)
-#define OMAP4_GPIO_DR3_MB_SHIFT					28
-#define OMAP4_GPIO_DR3_MB_MASK					(0x3 << 28)
-#define OMAP4_GPIO_DR4_MB_SHIFT					26
-#define OMAP4_GPIO_DR4_MB_MASK					(0x3 << 26)
-#define OMAP4_GPIO_DR5_MB_SHIFT					24
-#define OMAP4_GPIO_DR5_MB_MASK					(0x3 << 24)
-#define OMAP4_GPIO_DR6_MB_SHIFT					22
-#define OMAP4_GPIO_DR6_MB_MASK					(0x3 << 22)
-#define OMAP4_HSI_DR1_MB_SHIFT					20
-#define OMAP4_HSI_DR1_MB_MASK					(0x3 << 20)
-#define OMAP4_HSI_DR2_MB_SHIFT					18
-#define OMAP4_HSI_DR2_MB_MASK					(0x3 << 18)
-#define OMAP4_HSI_DR3_MB_SHIFT					16
-#define OMAP4_HSI_DR3_MB_MASK					(0x3 << 16)
-#define OMAP4_MCBSP2_DR0_MB_SHIFT				14
-#define OMAP4_MCBSP2_DR0_MB_MASK				(0x3 << 14)
-#define OMAP4_MCSPI4_DR0_MB_SHIFT				12
-#define OMAP4_MCSPI4_DR0_MB_MASK				(0x3 << 12)
-#define OMAP4_MCSPI4_DR1_MB_SHIFT				10
-#define OMAP4_MCSPI4_DR1_MB_MASK				(0x3 << 10)
-#define OMAP4_SDMMC3_DR0_MB_SHIFT				8
-#define OMAP4_SDMMC3_DR0_MB_MASK				(0x3 << 8)
-#define OMAP4_SPI2_DR0_MB_SHIFT					0
-#define OMAP4_SPI2_DR0_MB_MASK					(0x3 << 0)
-
-/* CONTROL_SMART3IO_PADCONF_1 */
-#define OMAP4_SPI2_DR1_MB_SHIFT					30
-#define OMAP4_SPI2_DR1_MB_MASK					(0x3 << 30)
-#define OMAP4_SPI2_DR2_MB_SHIFT					28
-#define OMAP4_SPI2_DR2_MB_MASK					(0x3 << 28)
-#define OMAP4_UART2_DR0_MB_SHIFT				26
-#define OMAP4_UART2_DR0_MB_MASK					(0x3 << 26)
-#define OMAP4_UART2_DR1_MB_SHIFT				24
-#define OMAP4_UART2_DR1_MB_MASK					(0x3 << 24)
-#define OMAP4_UART4_DR0_MB_SHIFT				22
-#define OMAP4_UART4_DR0_MB_MASK					(0x3 << 22)
-#define OMAP4_HSI_DR0_MB_SHIFT					20
-#define OMAP4_HSI_DR0_MB_MASK					(0x3 << 20)
-
-/* CONTROL_SMART3IO_PADCONF_2 */
-#define OMAP4_DMIC_DR0_LB_SHIFT					31
-#define OMAP4_DMIC_DR0_LB_MASK					(1 << 31)
-#define OMAP4_GPIO_DR3_LB_SHIFT					30
-#define OMAP4_GPIO_DR3_LB_MASK					(1 << 30)
-#define OMAP4_GPIO_DR4_LB_SHIFT					29
-#define OMAP4_GPIO_DR4_LB_MASK					(1 << 29)
-#define OMAP4_GPIO_DR5_LB_SHIFT					28
-#define OMAP4_GPIO_DR5_LB_MASK					(1 << 28)
-#define OMAP4_GPIO_DR6_LB_SHIFT					27
-#define OMAP4_GPIO_DR6_LB_MASK					(1 << 27)
-#define OMAP4_HSI_DR1_LB_SHIFT					26
-#define OMAP4_HSI_DR1_LB_MASK					(1 << 26)
-#define OMAP4_HSI_DR2_LB_SHIFT					25
-#define OMAP4_HSI_DR2_LB_MASK					(1 << 25)
-#define OMAP4_HSI_DR3_LB_SHIFT					24
-#define OMAP4_HSI_DR3_LB_MASK					(1 << 24)
-#define OMAP4_MCBSP2_DR0_LB_SHIFT				23
-#define OMAP4_MCBSP2_DR0_LB_MASK				(1 << 23)
-#define OMAP4_MCSPI4_DR0_LB_SHIFT				22
-#define OMAP4_MCSPI4_DR0_LB_MASK				(1 << 22)
-#define OMAP4_MCSPI4_DR1_LB_SHIFT				21
-#define OMAP4_MCSPI4_DR1_LB_MASK				(1 << 21)
-#define OMAP4_SLIMBUS2_DR0_LB_SHIFT				18
-#define OMAP4_SLIMBUS2_DR0_LB_MASK				(1 << 18)
-#define OMAP4_SPI2_DR0_LB_SHIFT					16
-#define OMAP4_SPI2_DR0_LB_MASK					(1 << 16)
-#define OMAP4_SPI2_DR1_LB_SHIFT					15
-#define OMAP4_SPI2_DR1_LB_MASK					(1 << 15)
-#define OMAP4_SPI2_DR2_LB_SHIFT					14
-#define OMAP4_SPI2_DR2_LB_MASK					(1 << 14)
-#define OMAP4_UART2_DR0_LB_SHIFT				13
-#define OMAP4_UART2_DR0_LB_MASK					(1 << 13)
-#define OMAP4_UART2_DR1_LB_SHIFT				12
-#define OMAP4_UART2_DR1_LB_MASK					(1 << 12)
-#define OMAP4_UART4_DR0_LB_SHIFT				11
-#define OMAP4_UART4_DR0_LB_MASK					(1 << 11)
-#define OMAP4_HSI_DR0_LB_SHIFT					10
-#define OMAP4_HSI_DR0_LB_MASK					(1 << 10)
-
-/* CONTROL_USBB_HSIC */
-#define OMAP4_USBB2_DR1_SR_SHIFT				30
-#define OMAP4_USBB2_DR1_SR_MASK					(0x3 << 30)
-#define OMAP4_USBB2_DR1_I_SHIFT					27
-#define OMAP4_USBB2_DR1_I_MASK					(0x7 << 27)
-#define OMAP4_USBB1_DR1_SR_SHIFT				25
-#define OMAP4_USBB1_DR1_SR_MASK					(0x3 << 25)
-#define OMAP4_USBB1_DR1_I_SHIFT					22
-#define OMAP4_USBB1_DR1_I_MASK					(0x7 << 22)
-#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT				20
-#define OMAP4_USBB1_HSIC_DATA_WD_MASK				(0x3 << 20)
-#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT			18
-#define OMAP4_USBB1_HSIC_STROBE_WD_MASK				(0x3 << 18)
-#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT				16
-#define OMAP4_USBB2_HSIC_DATA_WD_MASK				(0x3 << 16)
-#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT			14
-#define OMAP4_USBB2_HSIC_STROBE_WD_MASK				(0x3 << 14)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		13
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 13)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT			11
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 11)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		10
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 10)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT		8
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 8)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		7
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 7)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT			5
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 5)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		4
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 4)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT		2
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 2)
-
-/* CONTROL_SLIMBUS */
-#define OMAP4_SLIMBUS1_DR0_MB_SHIFT				30
-#define OMAP4_SLIMBUS1_DR0_MB_MASK				(0x3 << 30)
-#define OMAP4_SLIMBUS1_DR1_MB_SHIFT				28
-#define OMAP4_SLIMBUS1_DR1_MB_MASK				(0x3 << 28)
-#define OMAP4_SLIMBUS2_DR0_MB_SHIFT				26
-#define OMAP4_SLIMBUS2_DR0_MB_MASK				(0x3 << 26)
-#define OMAP4_SLIMBUS2_DR1_MB_SHIFT				24
-#define OMAP4_SLIMBUS2_DR1_MB_MASK				(0x3 << 24)
-#define OMAP4_SLIMBUS2_DR2_MB_SHIFT				22
-#define OMAP4_SLIMBUS2_DR2_MB_MASK				(0x3 << 22)
-#define OMAP4_SLIMBUS2_DR3_MB_SHIFT				20
-#define OMAP4_SLIMBUS2_DR3_MB_MASK				(0x3 << 20)
-#define OMAP4_SLIMBUS1_DR0_LB_SHIFT				19
-#define OMAP4_SLIMBUS1_DR0_LB_MASK				(1 << 19)
-#define OMAP4_SLIMBUS2_DR1_LB_SHIFT				18
-#define OMAP4_SLIMBUS2_DR1_LB_MASK				(1 << 18)
-
-/* CONTROL_PBIASLITE */
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT			31
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK			(1 << 31)
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT		30
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 30)
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT			29
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK			(1 << 29)
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT			28
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK			(1 << 28)
-#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT			27
-#define OMAP4_USIM_PBIASLITE_VMODE_MASK				(1 << 27)
-#define OMAP4_MMC1_PWRDNZ_SHIFT					26
-#define OMAP4_MMC1_PWRDNZ_MASK					(1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT			25
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK			(1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT		24
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT			23
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK			(1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT			22
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK			(1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT			21
-#define OMAP4_MMC1_PBIASLITE_VMODE_MASK				(1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT				20
-#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK				(1 << 20)
-
-/* CONTROL_I2C_0 */
-#define OMAP4_I2C4_SDA_GLFENB_SHIFT				31
-#define OMAP4_I2C4_SDA_GLFENB_MASK				(1 << 31)
-#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT				29
-#define OMAP4_I2C4_SDA_LOAD_BITS_MASK				(0x3 << 29)
-#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT				28
-#define OMAP4_I2C4_SDA_PULLUPRESX_MASK				(1 << 28)
-#define OMAP4_I2C3_SDA_GLFENB_SHIFT				27
-#define OMAP4_I2C3_SDA_GLFENB_MASK				(1 << 27)
-#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT				25
-#define OMAP4_I2C3_SDA_LOAD_BITS_MASK				(0x3 << 25)
-#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT				24
-#define OMAP4_I2C3_SDA_PULLUPRESX_MASK				(1 << 24)
-#define OMAP4_I2C2_SDA_GLFENB_SHIFT				23
-#define OMAP4_I2C2_SDA_GLFENB_MASK				(1 << 23)
-#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT				21
-#define OMAP4_I2C2_SDA_LOAD_BITS_MASK				(0x3 << 21)
-#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT				20
-#define OMAP4_I2C2_SDA_PULLUPRESX_MASK				(1 << 20)
-#define OMAP4_I2C1_SDA_GLFENB_SHIFT				19
-#define OMAP4_I2C1_SDA_GLFENB_MASK				(1 << 19)
-#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT				17
-#define OMAP4_I2C1_SDA_LOAD_BITS_MASK				(0x3 << 17)
-#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT				16
-#define OMAP4_I2C1_SDA_PULLUPRESX_MASK				(1 << 16)
-#define OMAP4_I2C4_SCL_GLFENB_SHIFT				15
-#define OMAP4_I2C4_SCL_GLFENB_MASK				(1 << 15)
-#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT				13
-#define OMAP4_I2C4_SCL_LOAD_BITS_MASK				(0x3 << 13)
-#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT				12
-#define OMAP4_I2C4_SCL_PULLUPRESX_MASK				(1 << 12)
-#define OMAP4_I2C3_SCL_GLFENB_SHIFT				11
-#define OMAP4_I2C3_SCL_GLFENB_MASK				(1 << 11)
-#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT				9
-#define OMAP4_I2C3_SCL_LOAD_BITS_MASK				(0x3 << 9)
-#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT				8
-#define OMAP4_I2C3_SCL_PULLUPRESX_MASK				(1 << 8)
-#define OMAP4_I2C2_SCL_GLFENB_SHIFT				7
-#define OMAP4_I2C2_SCL_GLFENB_MASK				(1 << 7)
-#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT				5
-#define OMAP4_I2C2_SCL_LOAD_BITS_MASK				(0x3 << 5)
-#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT				4
-#define OMAP4_I2C2_SCL_PULLUPRESX_MASK				(1 << 4)
-#define OMAP4_I2C1_SCL_GLFENB_SHIFT				3
-#define OMAP4_I2C1_SCL_GLFENB_MASK				(1 << 3)
-#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT				1
-#define OMAP4_I2C1_SCL_LOAD_BITS_MASK				(0x3 << 1)
-#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT				0
-#define OMAP4_I2C1_SCL_PULLUPRESX_MASK				(1 << 0)
-
-/* CONTROL_CAMERA_RX */
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT			31
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK			(1 << 31)
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT			29
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK			(0x3 << 29)
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT			24
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK			(0x1f << 24)
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT			22
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK			(0x3 << 22)
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT			21
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK			(1 << 21)
-#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT			19
-#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK			(0x3 << 19)
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT			18
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK			(1 << 18)
-#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT			16
-#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK			(0x3 << 16)
-
-/* CONTROL_AVDAC */
-#define OMAP4_AVDAC_ACEN_SHIFT					31
-#define OMAP4_AVDAC_ACEN_MASK					(1 << 31)
-#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT				30
-#define OMAP4_AVDAC_TVOUTBYPASS_MASK				(1 << 30)
-#define OMAP4_AVDAC_INPUTINV_SHIFT				29
-#define OMAP4_AVDAC_INPUTINV_MASK				(1 << 29)
-#define OMAP4_AVDAC_CTL_SHIFT					13
-#define OMAP4_AVDAC_CTL_MASK					(0xffff << 13)
-#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT				12
-#define OMAP4_AVDAC_CTL_WR_ACK_MASK				(1 << 12)
-
-/* CONTROL_HDMI_TX_PHY */
-#define OMAP4_HDMITXPHY_PADORDER_SHIFT				31
-#define OMAP4_HDMITXPHY_PADORDER_MASK				(1 << 31)
-#define OMAP4_HDMITXPHY_TXVALID_SHIFT				30
-#define OMAP4_HDMITXPHY_TXVALID_MASK				(1 << 30)
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT			29
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK			(1 << 29)
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT			28
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK			(1 << 28)
-
-/* CONTROL_MMC2 */
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT			31
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK			(1 << 31)
-
-/* CONTROL_DSIPHY */
-#define OMAP4_DSI2_LANEENABLE_SHIFT				29
-#define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
-#define OMAP4_DSI1_LANEENABLE_SHIFT				24
-#define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT					19
-#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT					14
-#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
-
-/* CONTROL_MCBSPLP */
-#define OMAP4_ALBCTRLRX_FSX_SHIFT				31
-#define OMAP4_ALBCTRLRX_FSX_MASK				(1 << 31)
-#define OMAP4_ALBCTRLRX_CLKX_SHIFT				30
-#define OMAP4_ALBCTRLRX_CLKX_MASK				(1 << 30)
-#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT				29
-#define OMAP4_ABE_MCBSP1_DR_EN_MASK				(1 << 29)
-
-/* CONTROL_USB2PHYCORE */
-#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT			31
-#define OMAP4_USB2PHY_AUTORESUME_EN_MASK			(1 << 31)
-#define OMAP4_USB2PHY_DISCHGDET_SHIFT				30
-#define OMAP4_USB2PHY_DISCHGDET_MASK				(1 << 30)
-#define OMAP4_USB2PHY_GPIOMODE_SHIFT				29
-#define OMAP4_USB2PHY_GPIOMODE_MASK				(1 << 29)
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT			28
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK			(1 << 28)
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT			27
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK			(1 << 27)
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT			26
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK			(1 << 26)
-#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT				25
-#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK				(1 << 25)
-#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT			24
-#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK				(1 << 24)
-#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT			21
-#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK			(0x7 << 21)
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT			20
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK			(1 << 20)
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT			19
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK			(1 << 19)
-#define OMAP4_USB2PHY_DATADET_SHIFT				18
-#define OMAP4_USB2PHY_DATADET_MASK				(1 << 18)
-#define OMAP4_USB2PHY_SINKONDP_SHIFT				17
-#define OMAP4_USB2PHY_SINKONDP_MASK				(1 << 17)
-#define OMAP4_USB2PHY_SRCONDM_SHIFT				16
-#define OMAP4_USB2PHY_SRCONDM_MASK				(1 << 16)
-#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT			15
-#define OMAP4_USB2PHY_RESTARTCHGDET_MASK			(1 << 15)
-#define OMAP4_USB2PHY_CHGDETDONE_SHIFT				14
-#define OMAP4_USB2PHY_CHGDETDONE_MASK				(1 << 14)
-#define OMAP4_USB2PHY_CHGDETECTED_SHIFT				13
-#define OMAP4_USB2PHY_CHGDETECTED_MASK				(1 << 13)
-#define OMAP4_USB2PHY_MCPCPUEN_SHIFT				12
-#define OMAP4_USB2PHY_MCPCPUEN_MASK				(1 << 12)
-#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT				11
-#define OMAP4_USB2PHY_MCPCMODEEN_MASK				(1 << 11)
-#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT			10
-#define OMAP4_USB2PHY_RESETDONEMCLK_MASK			(1 << 10)
-#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT			9
-#define OMAP4_USB2PHY_UTMIRESETDONE_MASK			(1 << 9)
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT			8
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK			(1 << 8)
-#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT			7
-#define OMAP4_USB2PHY_DATAPOLARITYN_MASK			(1 << 7)
-#define OMAP4_USBDPLL_FREQLOCK_SHIFT				6
-#define OMAP4_USBDPLL_FREQLOCK_MASK				(1 << 6)
-#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT			5
-#define OMAP4_USB2PHY_RESETDONETCLK_MASK			(1 << 5)
-
-/* CONTROL_I2C_1 */
-#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT				31
-#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK				(1 << 31)
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT			29
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK			(0x3 << 29)
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT			28
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK			(1 << 28)
-#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT				27
-#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK				(1 << 27)
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT			25
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK			(0x3 << 25)
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT			24
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK			(1 << 24)
-#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT				23
-#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK				(1 << 23)
-#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT				22
-#define OMAP4_HDMI_DDC_SDA_NMODE_MASK				(1 << 22)
-#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT				21
-#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK				(1 << 21)
-#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT				20
-#define OMAP4_HDMI_DDC_SCL_NMODE_MASK				(1 << 20)
-
-/* CONTROL_MMC1 */
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT			31
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK			(1 << 31)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT			30
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK			(1 << 30)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT			29
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK			(1 << 29)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT			28
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK			(1 << 28)
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT			27
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK				(1 << 27)
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT			26
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK				(1 << 26)
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT			25
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK				(1 << 25)
-#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT				24
-#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK				(1 << 24)
-#define OMAP4_USB_FD_CDEN_SHIFT					23
-#define OMAP4_USB_FD_CDEN_MASK					(1 << 23)
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT			22
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK				(1 << 22)
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT			21
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK				(1 << 21)
-
-/* CONTROL_HSI */
-#define OMAP4_HSI1_CALLOOP_SEL_SHIFT				31
-#define OMAP4_HSI1_CALLOOP_SEL_MASK				(1 << 31)
-#define OMAP4_HSI1_CALMUX_SEL_SHIFT				30
-#define OMAP4_HSI1_CALMUX_SEL_MASK				(1 << 30)
-#define OMAP4_HSI2_CALLOOP_SEL_SHIFT				29
-#define OMAP4_HSI2_CALLOOP_SEL_MASK				(1 << 29)
-#define OMAP4_HSI2_CALMUX_SEL_SHIFT				28
-#define OMAP4_HSI2_CALMUX_SEL_MASK				(1 << 28)
-
-/* CONTROL_USB */
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT		31
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK		(1 << 31)
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT		30
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK		(1 << 30)
-
-/* CONTROL_HDQ */
-#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT				31
-#define OMAP4_HDQ_SIO_PWRDNZ_MASK				(1 << 31)
-
-/* CONTROL_LPDDR2IO1_0 */
-#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT				30
-#define OMAP4_LPDDR2IO1_GR4_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR4_I_SHIFT				27
-#define OMAP4_LPDDR2IO1_GR4_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT				25
-#define OMAP4_LPDDR2IO1_GR4_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT				22
-#define OMAP4_LPDDR2IO1_GR3_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR3_I_SHIFT				19
-#define OMAP4_LPDDR2IO1_GR3_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT				17
-#define OMAP4_LPDDR2IO1_GR3_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT				14
-#define OMAP4_LPDDR2IO1_GR2_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR2_I_SHIFT				11
-#define OMAP4_LPDDR2IO1_GR2_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT				9
-#define OMAP4_LPDDR2IO1_GR2_WD_MASK				(0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT				6
-#define OMAP4_LPDDR2IO1_GR1_SR_MASK				(0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR1_I_SHIFT				3
-#define OMAP4_LPDDR2IO1_GR1_I_MASK				(0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT				1
-#define OMAP4_LPDDR2IO1_GR1_WD_MASK				(0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_1 */
-#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT				30
-#define OMAP4_LPDDR2IO1_GR8_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR8_I_SHIFT				27
-#define OMAP4_LPDDR2IO1_GR8_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT				25
-#define OMAP4_LPDDR2IO1_GR8_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT				22
-#define OMAP4_LPDDR2IO1_GR7_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR7_I_SHIFT				19
-#define OMAP4_LPDDR2IO1_GR7_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT				17
-#define OMAP4_LPDDR2IO1_GR7_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT				14
-#define OMAP4_LPDDR2IO1_GR6_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR6_I_SHIFT				11
-#define OMAP4_LPDDR2IO1_GR6_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT				9
-#define OMAP4_LPDDR2IO1_GR6_WD_MASK				(0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT				6
-#define OMAP4_LPDDR2IO1_GR5_SR_MASK				(0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR5_I_SHIFT				3
-#define OMAP4_LPDDR2IO1_GR5_I_MASK				(0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT				1
-#define OMAP4_LPDDR2IO1_GR5_WD_MASK				(0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_2 */
-#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT				30
-#define OMAP4_LPDDR2IO1_GR11_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR11_I_SHIFT				27
-#define OMAP4_LPDDR2IO1_GR11_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT				25
-#define OMAP4_LPDDR2IO1_GR11_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT				22
-#define OMAP4_LPDDR2IO1_GR10_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR10_I_SHIFT				19
-#define OMAP4_LPDDR2IO1_GR10_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT				17
-#define OMAP4_LPDDR2IO1_GR10_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT				14
-#define OMAP4_LPDDR2IO1_GR9_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR9_I_SHIFT				11
-#define OMAP4_LPDDR2IO1_GR9_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT				9
-#define OMAP4_LPDDR2IO1_GR9_WD_MASK				(0x3 << 9)
-
-