diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/arm/configs/badge4_defconfig linux-libre-4.19.80-gnu/arch/arm/configs/badge4_defconfig
--- linux-libre-4.19.79-gnu/arch/arm/configs/badge4_defconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/arm/configs/badge4_defconfig	2019-10-17 16:45:44.000000000 -0400
@@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 CONFIG_MSDOS_FS=y
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/arm/configs/corgi_defconfig linux-libre-4.19.80-gnu/arch/arm/configs/corgi_defconfig
--- linux-libre-4.19.79-gnu/arch/arm/configs/corgi_defconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/arm/configs/corgi_defconfig	2019-10-17 16:45:44.000000000 -0400
@@ -197,7 +197,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/arm/configs/pxa_defconfig linux-libre-4.19.80-gnu/arch/arm/configs/pxa_defconfig
--- linux-libre-4.19.79-gnu/arch/arm/configs/pxa_defconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/arm/configs/pxa_defconfig	2019-10-17 16:45:44.000000000 -0400
@@ -588,7 +588,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/arm/configs/s3c2410_defconfig linux-libre-4.19.80-gnu/arch/arm/configs/s3c2410_defconfig
--- linux-libre-4.19.79-gnu/arch/arm/configs/s3c2410_defconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/arm/configs/s3c2410_defconfig	2019-10-17 16:45:44.000000000 -0400
@@ -334,7 +334,6 @@ CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
 CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/arm/configs/spitz_defconfig linux-libre-4.19.80-gnu/arch/arm/configs/spitz_defconfig
--- linux-libre-4.19.79-gnu/arch/arm/configs/spitz_defconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/arm/configs/spitz_defconfig	2019-10-17 16:45:44.000000000 -0400
@@ -191,7 +191,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/arm64/kernel/process.c linux-libre-4.19.80-gnu/arch/arm64/kernel/process.c
--- linux-libre-4.19.79-gnu/arch/arm64/kernel/process.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/arm64/kernel/process.c	2019-10-17 16:45:44.000000000 -0400
@@ -285,22 +285,27 @@ void arch_release_task_struct(struct tas
 	fpsimd_release_task(tsk);
 }
 
-/*
- * src and dst may temporarily have aliased sve_state after task_struct
- * is copied.  We cannot fix this properly here, because src may have
- * live SVE state and dst's thread_info may not exist yet, so tweaking
- * either src's or dst's TIF_SVE is not safe.
- *
- * The unaliasing is done in copy_thread() instead.  This works because
- * dst is not schedulable or traceable until both of these functions
- * have been called.
- */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
 	if (current->mm)
 		fpsimd_preserve_current_state();
 	*dst = *src;
 
+	/* We rely on the above assignment to initialize dst's thread_flags: */
+	BUILD_BUG_ON(!IS_ENABLED(CONFIG_THREAD_INFO_IN_TASK));
+
+	/*
+	 * Detach src's sve_state (if any) from dst so that it does not
+	 * get erroneously used or freed prematurely.  dst's sve_state
+	 * will be allocated on demand later on if dst uses SVE.
+	 * For consistency, also clear TIF_SVE here: this could be done
+	 * later in copy_process(), but to avoid tripping up future
+	 * maintainers it is best not to leave TIF_SVE and sve_state in
+	 * an inconsistent state, even temporarily.
+	 */
+	dst->thread.sve_state = NULL;
+	clear_tsk_thread_flag(dst, TIF_SVE);
+
 	return 0;
 }
 
@@ -314,13 +319,6 @@ int copy_thread(unsigned long clone_flag
 	memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
 
 	/*
-	 * Unalias p->thread.sve_state (if any) from the parent task
-	 * and disable discard SVE state for p:
-	 */
-	clear_tsk_thread_flag(p, TIF_SVE);
-	p->thread.sve_state = NULL;
-
-	/*
 	 * In case p was allocated the same task_struct pointer as some
 	 * other recently-exited task, make sure p is disassociated from
 	 * any cpu that may have run that now-exited task recently.
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/arm64/kernel/topology.c linux-libre-4.19.80-gnu/arch/arm64/kernel/topology.c
--- linux-libre-4.19.79-gnu/arch/arm64/kernel/topology.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/arm64/kernel/topology.c	2019-10-17 16:45:44.000000000 -0400
@@ -340,17 +340,28 @@ void remove_cpu_topology(unsigned int cp
 }
 
 #ifdef CONFIG_ACPI
+static bool __init acpi_cpu_is_threaded(int cpu)
+{
+	int is_threaded = acpi_pptt_cpu_is_thread(cpu);
+
+	/*
+	 * if the PPTT doesn't have thread information, assume a homogeneous
+	 * machine and return the current CPU's thread state.
+	 */
+	if (is_threaded < 0)
+		is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
+
+	return !!is_threaded;
+}
+
 /*
  * Propagate the topology information of the processor_topology_node tree to the
  * cpu_topology array.
  */
 static int __init parse_acpi_topology(void)
 {
-	bool is_threaded;
 	int cpu, topology_id;
 
-	is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
-
 	for_each_possible_cpu(cpu) {
 		int i, cache_id;
 
@@ -358,7 +369,7 @@ static int __init parse_acpi_topology(vo
 		if (topology_id < 0)
 			return topology_id;
 
-		if (is_threaded) {
+		if (acpi_cpu_is_threaded(cpu)) {
 			cpu_topology[cpu].thread_id = topology_id;
 			topology_id = find_acpi_cpu_topology(cpu, 1);
 			cpu_topology[cpu].core_id   = topology_id;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/mips/configs/mtx1_defconfig linux-libre-4.19.80-gnu/arch/mips/configs/mtx1_defconfig
--- linux-libre-4.19.79-gnu/arch/mips/configs/mtx1_defconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/mips/configs/mtx1_defconfig	2019-10-17 16:45:44.000000000 -0400
@@ -623,7 +623,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/mips/configs/rm200_defconfig linux-libre-4.19.80-gnu/arch/mips/configs/rm200_defconfig
--- linux-libre-4.19.79-gnu/arch/mips/configs/rm200_defconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/mips/configs/rm200_defconfig	2019-10-17 16:45:44.000000000 -0400
@@ -335,7 +335,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/mips/include/uapi/asm/hwcap.h linux-libre-4.19.80-gnu/arch/mips/include/uapi/asm/hwcap.h
--- linux-libre-4.19.79-gnu/arch/mips/include/uapi/asm/hwcap.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/mips/include/uapi/asm/hwcap.h	2019-10-17 16:45:44.000000000 -0400
@@ -6,5 +6,16 @@
 #define HWCAP_MIPS_R6		(1 << 0)
 #define HWCAP_MIPS_MSA		(1 << 1)
 #define HWCAP_MIPS_CRC32	(1 << 2)
+#define HWCAP_MIPS_MIPS16	(1 << 3)
+#define HWCAP_MIPS_MDMX     (1 << 4)
+#define HWCAP_MIPS_MIPS3D   (1 << 5)
+#define HWCAP_MIPS_SMARTMIPS (1 << 6)
+#define HWCAP_MIPS_DSP      (1 << 7)
+#define HWCAP_MIPS_DSP2     (1 << 8)
+#define HWCAP_MIPS_DSP3     (1 << 9)
+#define HWCAP_MIPS_MIPS16E2 (1 << 10)
+#define HWCAP_LOONGSON_MMI  (1 << 11)
+#define HWCAP_LOONGSON_EXT  (1 << 12)
+#define HWCAP_LOONGSON_EXT2 (1 << 13)
 
 #endif /* _UAPI_ASM_HWCAP_H */
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/mips/kernel/cpu-probe.c linux-libre-4.19.80-gnu/arch/mips/kernel/cpu-probe.c
--- linux-libre-4.19.79-gnu/arch/mips/kernel/cpu-probe.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/mips/kernel/cpu-probe.c	2019-10-17 16:45:44.000000000 -0400
@@ -2105,6 +2105,39 @@ void cpu_probe(void)
 		elf_hwcap |= HWCAP_MIPS_MSA;
 	}
 
+	if (cpu_has_mips16)
+		elf_hwcap |= HWCAP_MIPS_MIPS16;
+
+	if (cpu_has_mdmx)
+		elf_hwcap |= HWCAP_MIPS_MDMX;
+
+	if (cpu_has_mips3d)
+		elf_hwcap |= HWCAP_MIPS_MIPS3D;
+
+	if (cpu_has_smartmips)
+		elf_hwcap |= HWCAP_MIPS_SMARTMIPS;
+
+	if (cpu_has_dsp)
+		elf_hwcap |= HWCAP_MIPS_DSP;
+
+	if (cpu_has_dsp2)
+		elf_hwcap |= HWCAP_MIPS_DSP2;
+
+	if (cpu_has_dsp3)
+		elf_hwcap |= HWCAP_MIPS_DSP3;
+
+	if (cpu_has_mips16e2)
+		elf_hwcap |= HWCAP_MIPS_MIPS16E2;
+
+	if (cpu_has_loongson_mmi)
+		elf_hwcap |= HWCAP_LOONGSON_MMI;
+
+	if (cpu_has_loongson_ext)
+		elf_hwcap |= HWCAP_LOONGSON_EXT;
+
+	if (cpu_has_loongson_ext2)
+		elf_hwcap |= HWCAP_LOONGSON_EXT2;
+
 	if (cpu_has_vz)
 		cpu_probe_vz(c);
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/mips/loongson64/Platform linux-libre-4.19.80-gnu/arch/mips/loongson64/Platform
--- linux-libre-4.19.79-gnu/arch/mips/loongson64/Platform	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/mips/loongson64/Platform	2019-10-17 16:45:44.000000000 -0400
@@ -43,6 +43,10 @@ else
       $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
 endif
 
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-y += $(call cc-option,-mno-loongson-mmi)
+
 #
 # Loongson Machines' Support
 #
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/mips/vdso/Makefile linux-libre-4.19.80-gnu/arch/mips/vdso/Makefile
--- linux-libre-4.19.79-gnu/arch/mips/vdso/Makefile	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/mips/vdso/Makefile	2019-10-17 16:45:44.000000000 -0400
@@ -9,6 +9,7 @@ ccflags-vdso := \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
 	$(filter -m%-float,$(KBUILD_CFLAGS)) \
+	$(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \
 	-D__VDSO__
 
 ifeq ($(cc-name),clang)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/x86/include/asm/mwait.h linux-libre-4.19.80-gnu/arch/x86/include/asm/mwait.h
--- linux-libre-4.19.79-gnu/arch/x86/include/asm/mwait.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/x86/include/asm/mwait.h	2019-10-17 16:45:44.000000000 -0400
@@ -21,7 +21,7 @@
 #define MWAIT_ECX_INTERRUPT_BREAK	0x1
 #define MWAITX_ECX_TIMER_ENABLE		BIT(1)
 #define MWAITX_MAX_LOOPS		((u32)-1)
-#define MWAITX_DISABLE_CSTATES		0xf
+#define MWAITX_DISABLE_CSTATES		0xf0
 
 static inline void __monitor(const void *eax, unsigned long ecx,
 			     unsigned long edx)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/arch/x86/lib/delay.c linux-libre-4.19.80-gnu/arch/x86/lib/delay.c
--- linux-libre-4.19.79-gnu/arch/x86/lib/delay.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/arch/x86/lib/delay.c	2019-10-17 16:45:44.000000000 -0400
@@ -113,8 +113,8 @@ static void delay_mwaitx(unsigned long _
 		__monitorx(raw_cpu_ptr(&cpu_tss_rw), 0, 0);
 
 		/*
-		 * AMD, like Intel, supports the EAX hint and EAX=0xf
-		 * means, do not enter any deep C-state and we use it
+		 * AMD, like Intel's MWAIT version, supports the EAX hint and
+		 * EAX=0xf0 means, do not enter any deep C-state and we use it
 		 * here in delay() to minimize wakeup latency.
 		 */
 		__mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/block/blk-rq-qos.c linux-libre-4.19.80-gnu/block/blk-rq-qos.c
--- linux-libre-4.19.79-gnu/block/blk-rq-qos.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/block/blk-rq-qos.c	2019-10-17 16:45:44.000000000 -0400
@@ -148,24 +148,27 @@ bool rq_depth_calc_max_depth(struct rq_d
 	return ret;
 }
 
-void rq_depth_scale_up(struct rq_depth *rqd)
+/* Returns true on success and false if scaling up wasn't possible */
+bool rq_depth_scale_up(struct rq_depth *rqd)
 {
 	/*
 	 * Hit max in previous round, stop here
 	 */
 	if (rqd->scaled_max)
-		return;
+		return false;
 
 	rqd->scale_step--;
 
 	rqd->scaled_max = rq_depth_calc_max_depth(rqd);
+	return true;
 }
 
 /*
  * Scale rwb down. If 'hard_throttle' is set, do it quicker, since we
- * had a latency violation.
+ * had a latency violation. Returns true on success and returns false if
+ * scaling down wasn't possible.
  */
-void rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle)
+bool rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle)
 {
 	/*
 	 * Stop scaling down when we've hit the limit. This also prevents
@@ -173,7 +176,7 @@ void rq_depth_scale_down(struct rq_depth
 	 * keep up.
 	 */
 	if (rqd->max_depth == 1)
-		return;
+		return false;
 
 	if (rqd->scale_step < 0 && hard_throttle)
 		rqd->scale_step = 0;
@@ -182,6 +185,7 @@ void rq_depth_scale_down(struct rq_depth
 
 	rqd->scaled_max = false;
 	rq_depth_calc_max_depth(rqd);
+	return true;
 }
 
 void rq_qos_exit(struct request_queue *q)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/block/blk-rq-qos.h linux-libre-4.19.80-gnu/block/blk-rq-qos.h
--- linux-libre-4.19.79-gnu/block/blk-rq-qos.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/block/blk-rq-qos.h	2019-10-17 16:45:44.000000000 -0400
@@ -94,8 +94,8 @@ static inline void rq_qos_del(struct req
 }
 
 bool rq_wait_inc_below(struct rq_wait *rq_wait, unsigned int limit);
-void rq_depth_scale_up(struct rq_depth *rqd);
-void rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle);
+bool rq_depth_scale_up(struct rq_depth *rqd);
+bool rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle);
 bool rq_depth_calc_max_depth(struct rq_depth *rqd);
 
 void rq_qos_cleanup(struct request_queue *, struct bio *);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/block/blk-wbt.c linux-libre-4.19.80-gnu/block/blk-wbt.c
--- linux-libre-4.19.79-gnu/block/blk-wbt.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/block/blk-wbt.c	2019-10-17 16:45:44.000000000 -0400
@@ -307,7 +307,8 @@ static void calc_wb_limits(struct rq_wb
 
 static void scale_up(struct rq_wb *rwb)
 {
-	rq_depth_scale_up(&rwb->rq_depth);
+	if (!rq_depth_scale_up(&rwb->rq_depth))
+		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_wake_all(rwb);
@@ -316,7 +317,8 @@ static void scale_up(struct rq_wb *rwb)
 
 static void scale_down(struct rq_wb *rwb, bool hard_throttle)
 {
-	rq_depth_scale_down(&rwb->rq_depth, hard_throttle);
+	if (!rq_depth_scale_down(&rwb->rq_depth, hard_throttle))
+		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_trace_step(rwb, "scale down");
diff -druNp --no-dereference linux-libre-4.19.79-gnu/Documentation/usb/rio.txt linux-libre-4.19.80-gnu/Documentation/usb/rio.txt
--- linux-libre-4.19.79-gnu/Documentation/usb/rio.txt	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/Documentation/usb/rio.txt	1969-12-31 19:00:00.000000000 -0500
@@ -1,138 +0,0 @@
-Copyright (C) 1999, 2000 Bruce Tenison
-Portions Copyright (C) 1999, 2000 David Nelson
-Thanks to David Nelson for guidance and the usage of the scanner.txt
-and scanner.c files to model our driver and this informative file.
-
-Mar. 2, 2000
-
-CHANGES
-
-- Initial Revision
-
-
-OVERVIEW
-
-This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.  
-Before I explain how to use this to access the Rio500 please be warned:
-
-W A R N I N G:
---------------
-
-Please note that this software is still under development.  The authors
-are in no way responsible for any damage that may occur, no matter how
-inconsequential.
-
-It seems that the Rio has a problem when sending .mp3 with low batteries.
-I suggest when the batteries are low and you want to transfer stuff that you
-replace it with a fresh one. In my case, what happened is I lost two 16kb
-blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash 
-memory.
-
-In an extreme case, I left my Rio playing overnight and the batteries wore 
-down to nothing and appear to have corrupted the flash memory. My RIO 
-needed to be replaced as a result.  Diamond tech support is aware of the 
-problem.  Do NOT allow your batteries to wear down to nothing before 
-changing them.  It appears RIO 500 firmware does not handle low battery 
-power well at all. 
-
-On systems with OHCI controllers, the kernel OHCI code appears to have 
-power on problems with some chipsets.  If you are having problems 
-connecting to your RIO 500, try turning it on first and then plugging it 
-into the USB cable.  
-
-Contact information:
---------------------
-
-   The main page for the project is hosted at sourceforge.net in the following
-   URL: <http://rio500.sourceforge.net>. You can also go to the project's
-   sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
-   There is also a mailing list: rio500-users@lists.sourceforge.net
-
-Authors:
--------
-
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith 
-Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
-things work there. Bruce Tenison <btenison@dibbs.net> is adding support
-for .fon files and also does testing. The program will mostly sure be
-re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use 
-with some important information regarding the communication with the Rio.
-
-ADDITIONAL INFORMATION and Userspace tools
-
-http://rio500.sourceforge.net/
-
-
-REQUIREMENTS
-
-A host with a USB port.  Ideally, either a UHCI (Intel) or OHCI
-(Compaq and others) hardware port should work.
-
-A Linux development kernel (2.3.x) with USB support enabled or a
-backported version to linux-2.2.x.  See http://www.linux-usb.org for
-more information on accomplishing this.
-
-A Linux kernel with RIO 500 support enabled.
-
-'lspci' which is only needed to determine the type of USB hardware
-available in your machine.
-
-CONFIGURATION
-
-Using `lspci -v`, determine the type of USB hardware available.
-
-  If you see something like:
-
-    USB Controller: ......
-    Flags: .....
-    I/O ports at ....
-
-  Then you have a UHCI based controller.
-
-  If you see something like:
-
-     USB Controller: .....
-     Flags: ....
-     Memory at .....
-
-  Then you have a OHCI based controller.
-
-Using `make menuconfig` or your preferred method for configuring the
-kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
-hardware (determined from the steps above), 'USB Diamond Rio500 support', and
-'Preliminary USB device filesystem'.  Compile and install the modules
-(you may need to execute `depmod -a` to update the module
-dependencies).
-
-Add a device for the USB rio500:
-  `mknod /dev/usb/rio500 c 180 64`
-
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
-group and world permissions).  Both read and write permissions are
-required for proper operation.
-
-Load the appropriate modules (if compiled as modules):
-
-  OHCI:
-    modprobe usbcore
-    modprobe usb-ohci
-    modprobe rio500
-
-  UHCI:
-    modprobe usbcore
-    modprobe usb-uhci  (or uhci)
-    modprobe rio500
-
-That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
-be able to access the rio500.
-
-BUGS
-
-If you encounter any problems feel free to drop me an email.
-
-Bruce Tenison
-btenison@dibbs.net
-
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/acpi/pptt.c linux-libre-4.19.80-gnu/drivers/acpi/pptt.c
--- linux-libre-4.19.79-gnu/drivers/acpi/pptt.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/acpi/pptt.c	2019-10-17 16:45:44.000000000 -0400
@@ -510,6 +510,44 @@ static int find_acpi_cpu_topology_tag(un
 }
 
 /**
+ * check_acpi_cpu_flag() - Determine if CPU node has a flag set
+ * @cpu: Kernel logical CPU number
+ * @rev: The minimum PPTT revision defining the flag
+ * @flag: The flag itself
+ *
+ * Check the node representing a CPU for a given flag.
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, the CPU cannot be found or
+ *	   the table revision isn't new enough.
+ *	   1, any passed flag set
+ *	   0, flag unset
+ */
+static int check_acpi_cpu_flag(unsigned int cpu, int rev, u32 flag)
+{
+	struct acpi_table_header *table;
+	acpi_status status;
+	u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
+	struct acpi_pptt_processor *cpu_node = NULL;
+	int ret = -ENOENT;
+
+	status = acpi_get_table(ACPI_SIG_PPTT, 0, &table);
+	if (ACPI_FAILURE(status)) {
+		pr_warn_once("No PPTT table found, cpu topology may be inaccurate\n");
+		return ret;
+	}
+
+	if (table->revision >= rev)
+		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
+
+	if (cpu_node)
+		ret = (cpu_node->flags & flag) != 0;
+
+	acpi_put_table(table);
+
+	return ret;
+}
+
+/**
  * acpi_find_last_cache_level() - Determines the number of cache levels for a PE
  * @cpu: Kernel logical cpu number
  *
@@ -574,6 +612,20 @@ int cache_setup_acpi(unsigned int cpu)
 }
 
 /**
+ * acpi_pptt_cpu_is_thread() - Determine if CPU is a thread
+ * @cpu: Kernel logical CPU number
+ *
+ * Return: 1, a thread
+ *         0, not a thread
+ *         -ENOENT ,if the PPTT doesn't exist, the CPU cannot be found or
+ *         the table revision isn't new enough.
+ */
+int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+	return check_acpi_cpu_flag(cpu, 2, ACPI_PPTT_ACPI_PROCESSOR_IS_THREAD);
+}
+
+/**
  * find_acpi_cpu_topology() - Determine a unique topology value for a given cpu
  * @cpu: Kernel logical cpu number
  * @level: The topological level for which we would like a unique ID
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/firmware/efi/efi.c linux-libre-4.19.80-gnu/drivers/firmware/efi/efi.c
--- linux-libre-4.19.79-gnu/drivers/firmware/efi/efi.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/firmware/efi/efi.c	2019-10-17 16:45:44.000000000 -0400
@@ -281,6 +281,9 @@ static __init int efivar_ssdt_load(void)
 	void *data;
 	int ret;
 
+	if (!efivar_ssdt[0])
+		return 0;
+
 	ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries);
 
 	list_for_each_entry_safe(entry, aux, &entries, list) {
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/firmware/google/vpd_decode.c linux-libre-4.19.80-gnu/drivers/firmware/google/vpd_decode.c
--- linux-libre-4.19.79-gnu/drivers/firmware/google/vpd_decode.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/firmware/google/vpd_decode.c	2019-10-17 16:45:44.000000000 -0400
@@ -62,7 +62,7 @@ static int vpd_decode_entry(const u32 ma
 	if (max_len - consumed < *entry_len)
 		return VPD_FAIL;
 
-	consumed += decoded_len;
+	consumed += *entry_len;
 	*_consumed = consumed;
 	return VPD_OK;
 }
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/gpio/gpio-eic-sprd.c linux-libre-4.19.80-gnu/drivers/gpio/gpio-eic-sprd.c
--- linux-libre-4.19.79-gnu/drivers/gpio/gpio-eic-sprd.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/gpio/gpio-eic-sprd.c	2019-10-17 16:45:44.000000000 -0400
@@ -529,11 +529,12 @@ static void sprd_eic_handle_one_type(str
 		}
 
 		for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
-			girq = irq_find_mapping(chip->irq.domain,
-					bank * SPRD_EIC_PER_BANK_NR + n);
+			u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
+
+			girq = irq_find_mapping(chip->irq.domain, offset);
 
 			generic_handle_irq(girq);
-			sprd_eic_toggle_trigger(chip, girq, n);
+			sprd_eic_toggle_trigger(chip, girq, offset);
 		}
 	}
 }
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/gpio/gpiolib.c linux-libre-4.19.80-gnu/drivers/gpio/gpiolib.c
--- linux-libre-4.19.79-gnu/drivers/gpio/gpiolib.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/gpio/gpiolib.c	2019-10-17 16:45:44.000000000 -0400
@@ -2649,8 +2649,10 @@ int gpiod_direction_output(struct gpio_d
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open drain by not actively driving the line high */
-		if (value)
-			return gpiod_direction_input(desc);
+		if (value) {
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
 		ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
@@ -2658,8 +2660,10 @@ int gpiod_direction_output(struct gpio_d
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open source by not actively driving the line low */
-		if (!value)
-			return gpiod_direction_input(desc);
+		if (!value) {
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
 	} else {
 		gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
 					    PIN_CONFIG_DRIVE_PUSH_PULL);
@@ -2667,6 +2671,17 @@ int gpiod_direction_output(struct gpio_d
 
 set_output_value:
 	return gpiod_direction_output_raw_commit(desc, value);
+
+set_output_flag:
+	/*
+	 * When emulating open-source or open-drain functionalities by not
+	 * actively driving the line (setting mode to input) we still need to
+	 * set the IS_OUT flag or otherwise we won't be able to set the line
+	 * value anymore.
+	 */
+	if (ret == 0)
+		set_bit(FLAG_IS_OUT, &desc->flags);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_output);
 
@@ -2980,8 +2995,6 @@ static void gpio_set_open_drain_value_co
 
 	if (value) {
 		err = chip->direction_input(chip, offset);
-		if (!err)
-			clear_bit(FLAG_IS_OUT, &desc->flags);
 	} else {
 		err = chip->direction_output(chip, offset, 0);
 		if (!err)
@@ -3011,8 +3024,6 @@ static void gpio_set_open_source_value_c
 			set_bit(FLAG_IS_OUT, &desc->flags);
 	} else {
 		err = chip->direction_input(chip, offset);
-		if (!err)
-			clear_bit(FLAG_IS_OUT, &desc->flags);
 	}
 	trace_gpio_direction(desc_to_gpio(desc), !value, err);
 	if (err < 0)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/iio/adc/ad799x.c linux-libre-4.19.80-gnu/drivers/iio/adc/ad799x.c
--- linux-libre-4.19.79-gnu/drivers/iio/adc/ad799x.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/iio/adc/ad799x.c	2019-10-17 16:45:44.000000000 -0400
@@ -814,10 +814,10 @@ static int ad799x_probe(struct i2c_clien
 
 	ret = ad799x_write_config(st, st->chip_config->default_config);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	ret = ad799x_read_config(st);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	st->config = ret;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/iio/adc/axp288_adc.c linux-libre-4.19.80-gnu/drivers/iio/adc/axp288_adc.c
--- linux-libre-4.19.79-gnu/drivers/iio/adc/axp288_adc.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/iio/adc/axp288_adc.c	2019-10-17 16:45:44.000000000 -0400
@@ -16,6 +16,7 @@
  *
  */
 
+#include <linux/dmi.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -34,6 +35,11 @@
 #define AXP288_ADC_EN_MASK				0xF0
 #define AXP288_ADC_TS_ENABLE				0x01
 
+#define AXP288_ADC_TS_BIAS_MASK				GENMASK(5, 4)
+#define AXP288_ADC_TS_BIAS_20UA				(0 << 4)
+#define AXP288_ADC_TS_BIAS_40UA				(1 << 4)
+#define AXP288_ADC_TS_BIAS_60UA				(2 << 4)
+#define AXP288_ADC_TS_BIAS_80UA				(3 << 4)
 #define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
 #define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
 #define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
@@ -186,10 +192,36 @@ static int axp288_adc_read_raw(struct ii
 	return ret;
 }
 
+/*
+ * We rely on the machine's firmware to correctly setup the TS pin bias current
+ * at boot. This lists systems with broken fw where we need to set it ourselves.
+ */
+static const struct dmi_system_id axp288_adc_ts_bias_override[] = {
+	{
+		/* Lenovo Ideapad 100S (11 inch) */
+		.matches = {
+		  DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		  DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 100S-11IBY"),
+		},
+		.driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
+	},
+	{}
+};
+
 static int axp288_adc_initialize(struct axp288_adc_info *info)
 {
+	const struct dmi_system_id *bias_override;
 	int ret, adc_enable_val;
 
+	bias_override = dmi_first_match(axp288_adc_ts_bias_override);
+	if (bias_override) {
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_BIAS_MASK,
+					 (uintptr_t)bias_override->driver_data);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * Determine if the TS pin is enabled and set the TS current-source
 	 * accordingly.
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/iio/adc/hx711.c linux-libre-4.19.80-gnu/drivers/iio/adc/hx711.c
--- linux-libre-4.19.79-gnu/drivers/iio/adc/hx711.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/iio/adc/hx711.c	2019-10-17 16:45:44.000000000 -0400
@@ -109,14 +109,14 @@ struct hx711_data {
 
 static int hx711_cycle(struct hx711_data *hx711_data)
 {
-	int val;
+	unsigned long flags;
 
 	/*
 	 * if preempted for more then 60us while PD_SCK is high:
 	 * hx711 is going in reset
 	 * ==> measuring is false
 	 */
-	preempt_disable();
+	local_irq_save(flags);
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
 
 	/*
@@ -126,7 +126,6 @@ static int hx711_cycle(struct hx711_data
 	 */
 	ndelay(hx711_data->data_ready_delay_ns);
 
-	val = gpiod_get_value(hx711_data->gpiod_dout);
 	/*
 	 * here we are not waiting for 0.2 us as suggested by the datasheet,
 	 * because the oscilloscope showed in a test scenario
@@ -134,7 +133,7 @@ static int hx711_cycle(struct hx711_data
 	 * and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
 	 */
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
-	preempt_enable();
+	local_irq_restore(flags);
 
 	/*
 	 * make it a square wave for addressing cases with capacitance on
@@ -142,7 +141,8 @@ static int hx711_cycle(struct hx711_data
 	 */
 	ndelay(hx711_data->data_ready_delay_ns);
 
-	return val;
+	/* sample as late as possible */
+	return gpiod_get_value(hx711_data->gpiod_dout);
 }
 
 static int hx711_read(struct hx711_data *hx711_data)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/iio/adc/stm32-adc.c linux-libre-4.19.80-gnu/drivers/iio/adc/stm32-adc.c
--- linux-libre-4.19.79-gnu/drivers/iio/adc/stm32-adc.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/iio/adc/stm32-adc.c	2019-10-17 16:45:44.000000000 -0400
@@ -27,115 +27,6 @@
 
 #include "stm32-adc-core.h"
 
-/* STM32F4 - Registers for each ADC instance */
-#define STM32F4_ADC_SR			0x00
-#define STM32F4_ADC_CR1			0x04
-#define STM32F4_ADC_CR2			0x08
-#define STM32F4_ADC_SMPR1		0x0C
-#define STM32F4_ADC_SMPR2		0x10
-#define STM32F4_ADC_HTR			0x24
-#define STM32F4_ADC_LTR			0x28
-#define STM32F4_ADC_SQR1		0x2C
-#define STM32F4_ADC_SQR2		0x30
-#define STM32F4_ADC_SQR3		0x34
-#define STM32F4_ADC_JSQR		0x38
-#define STM32F4_ADC_JDR1		0x3C
-#define STM32F4_ADC_JDR2		0x40
-#define STM32F4_ADC_JDR3		0x44
-#define STM32F4_ADC_JDR4		0x48
-#define STM32F4_ADC_DR			0x4C
-
-/* STM32F4_ADC_SR - bit fields */
-#define STM32F4_STRT			BIT(4)
-#define STM32F4_EOC			BIT(1)
-
-/* STM32F4_ADC_CR1 - bit fields */
-#define STM32F4_RES_SHIFT		24
-#define STM32F4_RES_MASK		GENMASK(25, 24)
-#define STM32F4_SCAN			BIT(8)
-#define STM32F4_EOCIE			BIT(5)
-
-/* STM32F4_ADC_CR2 - bit fields */
-#define STM32F4_SWSTART			BIT(30)
-#define STM32F4_EXTEN_SHIFT		28
-#define STM32F4_EXTEN_MASK		GENMASK(29, 28)
-#define STM32F4_EXTSEL_SHIFT		24
-#define STM32F4_EXTSEL_MASK		GENMASK(27, 24)
-#define STM32F4_EOCS			BIT(10)
-#define STM32F4_DDS			BIT(9)
-#define STM32F4_DMA			BIT(8)
-#define STM32F4_ADON			BIT(0)
-
-/* STM32H7 - Registers for each ADC instance */
-#define STM32H7_ADC_ISR			0x00
-#define STM32H7_ADC_IER			0x04
-#define STM32H7_ADC_CR			0x08
-#define STM32H7_ADC_CFGR		0x0C
-#define STM32H7_ADC_SMPR1		0x14
-#define STM32H7_ADC_SMPR2		0x18
-#define STM32H7_ADC_PCSEL		0x1C
-#define STM32H7_ADC_SQR1		0x30
-#define STM32H7_ADC_SQR2		0x34
-#define STM32H7_ADC_SQR3		0x38
-#define STM32H7_ADC_SQR4		0x3C
-#define STM32H7_ADC_DR			0x40
-#define STM32H7_ADC_DIFSEL		0xC0
-#define STM32H7_ADC_CALFACT		0xC4
-#define STM32H7_ADC_CALFACT2		0xC8
-
-/* STM32H7_ADC_ISR - bit fields */
-#define STM32MP1_VREGREADY		BIT(12)
-#define STM32H7_EOC			BIT(2)
-#define STM32H7_ADRDY			BIT(0)
-
-/* STM32H7_ADC_IER - bit fields */
-#define STM32H7_EOCIE			STM32H7_EOC
-
-/* STM32H7_ADC_CR - bit fields */
-#define STM32H7_ADCAL			BIT(31)
-#define STM32H7_ADCALDIF		BIT(30)
-#define STM32H7_DEEPPWD			BIT(29)
-#define STM32H7_ADVREGEN		BIT(28)
-#define STM32H7_LINCALRDYW6		BIT(27)
-#define STM32H7_LINCALRDYW5		BIT(26)
-#define STM32H7_LINCALRDYW4		BIT(25)
-#define STM32H7_LINCALRDYW3		BIT(24)
-#define STM32H7_LINCALRDYW2		BIT(23)
-#define STM32H7_LINCALRDYW1		BIT(22)
-#define STM32H7_ADCALLIN		BIT(16)
-#define STM32H7_BOOST			BIT(8)
-#define STM32H7_ADSTP			BIT(4)
-#define STM32H7_ADSTART			BIT(2)
-#define STM32H7_ADDIS			BIT(1)
-#define STM32H7_ADEN			BIT(0)
-
-/* STM32H7_ADC_CFGR bit fields */
-#define STM32H7_EXTEN_SHIFT		10
-#define STM32H7_EXTEN_MASK		GENMASK(11, 10)
-#define STM32H7_EXTSEL_SHIFT		5
-#define STM32H7_EXTSEL_MASK		GENMASK(9, 5)
-#define STM32H7_RES_SHIFT		2
-#define STM32H7_RES_MASK		GENMASK(4, 2)
-#define STM32H7_DMNGT_SHIFT		0
-#define STM32H7_DMNGT_MASK		GENMASK(1, 0)
-
-enum stm32h7_adc_dmngt {
-	STM32H7_DMNGT_DR_ONLY,		/* Regular data in DR only */
-	STM32H7_DMNGT_DMA_ONESHOT,	/* DMA one shot mode */
-	STM32H7_DMNGT_DFSDM,		/* DFSDM mode */
-	STM32H7_DMNGT_DMA_CIRC,		/* DMA circular mode */
-};
-
-/* STM32H7_ADC_CALFACT - bit fields */
-#define STM32H7_CALFACT_D_SHIFT		16
-#define STM32H7_CALFACT_D_MASK		GENMASK(26, 16)
-#define STM32H7_CALFACT_S_SHIFT		0
-#define STM32H7_CALFACT_S_MASK		GENMASK(10, 0)
-
-/* STM32H7_ADC_CALFACT2 - bit fields */
-#define STM32H7_LINCALFACT_SHIFT	0
-#define STM32H7_LINCALFACT_MASK		GENMASK(29, 0)
-
 /* Number of linear calibration shadow registers / LINCALRDYW control bits */
 #define STM32H7_LINCALFACT_NUM		6
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/iio/adc/stm32-adc-core.c linux-libre-4.19.80-gnu/drivers/iio/adc/stm32-adc-core.c
--- linux-libre-4.19.79-gnu/drivers/iio/adc/stm32-adc-core.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/iio/adc/stm32-adc-core.c	2019-10-17 16:45:44.000000000 -0400
@@ -21,45 +21,22 @@
 
 #include "stm32-adc-core.h"
 
-/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
-#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
-
-/* STM32F4_ADC_CSR - bit fields */
-#define STM32F4_EOC3			BIT(17)
-#define STM32F4_EOC2			BIT(9)
-#define STM32F4_EOC1			BIT(1)
-
-/* STM32F4_ADC_CCR - bit fields */
-#define STM32F4_ADC_ADCPRE_SHIFT	16
-#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
-
-/* STM32H7 - common registers for all ADC instances */
-#define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
-
-/* STM32H7_ADC_CSR - bit fields */
-#define STM32H7_EOC_SLV			BIT(18)
-#define STM32H7_EOC_MST			BIT(2)
-
-/* STM32H7_ADC_CCR - bit fields */
-#define STM32H7_PRESC_SHIFT		18
-#define STM32H7_PRESC_MASK		GENMASK(21, 18)
-#define STM32H7_CKMODE_SHIFT		16
-#define STM32H7_CKMODE_MASK		GENMASK(17, 16)
-
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
  * @csr:	common status register offset
  * @eoc1:	adc1 end of conversion flag in @csr
  * @eoc2:	adc2 end of conversion flag in @csr
  * @eoc3:	adc3 end of conversion flag in @csr
+ * @ier:	interrupt enable register offset for each adc
+ * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
 struct stm32_adc_common_regs {
 	u32 csr;
 	u32 eoc1_msk;
 	u32 eoc2_msk;
 	u32 eoc3_msk;
+	u32 ier;
+	u32 eocie_msk;
 };
 
 struct stm32_adc_priv;
@@ -268,6 +245,8 @@ static const struct stm32_adc_common_reg
 	.eoc1_msk = STM32F4_EOC1,
 	.eoc2_msk = STM32F4_EOC2,
 	.eoc3_msk = STM32F4_EOC3,
+	.ier = STM32F4_ADC_CR1,
+	.eocie_msk = STM32F4_EOCIE,
 };
 
 /* STM32H7 common registers definitions */
@@ -275,8 +254,24 @@ static const struct stm32_adc_common_reg
 	.csr = STM32H7_ADC_CSR,
 	.eoc1_msk = STM32H7_EOC_MST,
 	.eoc2_msk = STM32H7_EOC_SLV,
+	.ier = STM32H7_ADC_IER,
+	.eocie_msk = STM32H7_EOCIE,
 };
 
+static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
+	0, STM32_ADC_OFFSET, STM32_ADC_OFFSET * 2,
+};
+
+static unsigned int stm32_adc_eoc_enabled(struct stm32_adc_priv *priv,
+					  unsigned int adc)
+{
+	u32 ier, offset = stm32_adc_offset[adc];
+
+	ier = readl_relaxed(priv->common.base + offset + priv->cfg->regs->ier);
+
+	return ier & priv->cfg->regs->eocie_msk;
+}
+
 /* ADC common interrupt for all instances */
 static void stm32_adc_irq_handler(struct irq_desc *desc)
 {
@@ -287,13 +282,28 @@ static void stm32_adc_irq_handler(struct
 	chained_irq_enter(chip, desc);
 	status = readl_relaxed(priv->common.base + priv->cfg->regs->csr);
 
-	if (status & priv->cfg->regs->eoc1_msk)
+	/*
+	 * End of conversion may be handled by using IRQ or DMA. There may be a
+	 * race here when two conversions complete at the same time on several
+	 * ADCs. EOC may be read 'set' for several ADCs, with:
+	 * - an ADC configured to use DMA (EOC triggers the DMA request, and
+	 *   is then automatically cleared by DR read in hardware)
+	 * - an ADC configured to use IRQs (EOCIE bit is set. The handler must
+	 *   be called in this case)
+	 * So both EOC status bit in CSR and EOCIE control bit must be checked
+	 * before invoking the interrupt handler (e.g. call ISR only for
+	 * IRQ-enabled ADCs).
+	 */
+	if (status & priv->cfg->regs->eoc1_msk &&
+	    stm32_adc_eoc_enabled(priv, 0))
 		generic_handle_irq(irq_find_mapping(priv->domain, 0));
 
-	if (status & priv->cfg->regs->eoc2_msk)
+	if (status & priv->cfg->regs->eoc2_msk &&
+	    stm32_adc_eoc_enabled(priv, 1))
 		generic_handle_irq(irq_find_mapping(priv->domain, 1));
 
-	if (status & priv->cfg->regs->eoc3_msk)
+	if (status & priv->cfg->regs->eoc3_msk &&
+	    stm32_adc_eoc_enabled(priv, 2))
 		generic_handle_irq(irq_find_mapping(priv->domain, 2));
 
 	chained_irq_exit(chip, desc);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/iio/adc/stm32-adc-core.h linux-libre-4.19.80-gnu/drivers/iio/adc/stm32-adc-core.h
--- linux-libre-4.19.79-gnu/drivers/iio/adc/stm32-adc-core.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/iio/adc/stm32-adc-core.h	2019-10-17 16:45:44.000000000 -0400
@@ -25,8 +25,145 @@
  * --------------------------------------------------------
  */
 #define STM32_ADC_MAX_ADCS		3
+#define STM32_ADC_OFFSET		0x100
 #define STM32_ADCX_COMN_OFFSET		0x300
 
+/* STM32F4 - Registers for each ADC instance */
+#define STM32F4_ADC_SR			0x00
+#define STM32F4_ADC_CR1			0x04
+#define STM32F4_ADC_CR2			0x08
+#define STM32F4_ADC_SMPR1		0x0C
+#define STM32F4_ADC_SMPR2		0x10
+#define STM32F4_ADC_HTR			0x24
+#define STM32F4_ADC_LTR			0x28
+#define STM32F4_ADC_SQR1		0x2C
+#define STM32F4_ADC_SQR2		0x30
+#define STM32F4_ADC_SQR3		0x34
+#define STM32F4_ADC_JSQR		0x38
+#define STM32F4_ADC_JDR1		0x3C
+#define STM32F4_ADC_JDR2		0x40
+#define STM32F4_ADC_JDR3		0x44
+#define STM32F4_ADC_JDR4		0x48
+#define STM32F4_ADC_DR			0x4C
+
+/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
+#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
+
+/* STM32F4_ADC_SR - bit fields */
+#define STM32F4_STRT			BIT(4)
+#define STM32F4_EOC			BIT(1)
+
+/* STM32F4_ADC_CR1 - bit fields */
+#define STM32F4_RES_SHIFT		24
+#define STM32F4_RES_MASK		GENMASK(25, 24)
+#define STM32F4_SCAN			BIT(8)
+#define STM32F4_EOCIE			BIT(5)
+
+/* STM32F4_ADC_CR2 - bit fields */
+#define STM32F4_SWSTART			BIT(30)
+#define STM32F4_EXTEN_SHIFT		28
+#define STM32F4_EXTEN_MASK		GENMASK(29, 28)
+#define STM32F4_EXTSEL_SHIFT		24
+#define STM32F4_EXTSEL_MASK		GENMASK(27, 24)
+#define STM32F4_EOCS			BIT(10)
+#define STM32F4_DDS			BIT(9)
+#define STM32F4_DMA			BIT(8)
+#define STM32F4_ADON			BIT(0)
+
+/* STM32F4_ADC_CSR - bit fields */
+#define STM32F4_EOC3			BIT(17)
+#define STM32F4_EOC2			BIT(9)
+#define STM32F4_EOC1			BIT(1)
+
+/* STM32F4_ADC_CCR - bit fields */
+#define STM32F4_ADC_ADCPRE_SHIFT	16
+#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
+
+/* STM32H7 - Registers for each ADC instance */
+#define STM32H7_ADC_ISR			0x00
+#define STM32H7_ADC_IER			0x04
+#define STM32H7_ADC_CR			0x08
+#define STM32H7_ADC_CFGR		0x0C
+#define STM32H7_ADC_SMPR1		0x14
+#define STM32H7_ADC_SMPR2		0x18
+#define STM32H7_ADC_PCSEL		0x1C
+#define STM32H7_ADC_SQR1		0x30
+#define STM32H7_ADC_SQR2		0x34
+#define STM32H7_ADC_SQR3		0x38
+#define STM32H7_ADC_SQR4		0x3C
+#define STM32H7_ADC_DR			0x40
+#define STM32H7_ADC_DIFSEL		0xC0
+#define STM32H7_ADC_CALFACT		0xC4
+#define STM32H7_ADC_CALFACT2		0xC8
+
+/* STM32H7 - common registers for all ADC instances */
+#define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
+
+/* STM32H7_ADC_ISR - bit fields */
+#define STM32MP1_VREGREADY		BIT(12)
+#define STM32H7_EOC			BIT(2)
+#define STM32H7_ADRDY			BIT(0)
+
+/* STM32H7_ADC_IER - bit fields */
+#define STM32H7_EOCIE			STM32H7_EOC
+
+/* STM32H7_ADC_CR - bit fields */
+#define STM32H7_ADCAL			BIT(31)
+#define STM32H7_ADCALDIF		BIT(30)
+#define STM32H7_DEEPPWD			BIT(29)
+#define STM32H7_ADVREGEN		BIT(28)
+#define STM32H7_LINCALRDYW6		BIT(27)
+#define STM32H7_LINCALRDYW5		BIT(26)
+#define STM32H7_LINCALRDYW4		BIT(25)
+#define STM32H7_LINCALRDYW3		BIT(24)
+#define STM32H7_LINCALRDYW2		BIT(23)
+#define STM32H7_LINCALRDYW1		BIT(22)
+#define STM32H7_ADCALLIN		BIT(16)
+#define STM32H7_BOOST			BIT(8)
+#define STM32H7_ADSTP			BIT(4)
+#define STM32H7_ADSTART			BIT(2)
+#define STM32H7_ADDIS			BIT(1)
+#define STM32H7_ADEN			BIT(0)
+
+/* STM32H7_ADC_CFGR bit fields */
+#define STM32H7_EXTEN_SHIFT		10
+#define STM32H7_EXTEN_MASK		GENMASK(11, 10)
+#define STM32H7_EXTSEL_SHIFT		5
+#define STM32H7_EXTSEL_MASK		GENMASK(9, 5)
+#define STM32H7_RES_SHIFT		2
+#define STM32H7_RES_MASK		GENMASK(4, 2)
+#define STM32H7_DMNGT_SHIFT		0
+#define STM32H7_DMNGT_MASK		GENMASK(1, 0)
+
+enum stm32h7_adc_dmngt {
+	STM32H7_DMNGT_DR_ONLY,		/* Regular data in DR only */
+	STM32H7_DMNGT_DMA_ONESHOT,	/* DMA one shot mode */
+	STM32H7_DMNGT_DFSDM,		/* DFSDM mode */
+	STM32H7_DMNGT_DMA_CIRC,		/* DMA circular mode */
+};
+
+/* STM32H7_ADC_CALFACT - bit fields */
+#define STM32H7_CALFACT_D_SHIFT		16
+#define STM32H7_CALFACT_D_MASK		GENMASK(26, 16)
+#define STM32H7_CALFACT_S_SHIFT		0
+#define STM32H7_CALFACT_S_MASK		GENMASK(10, 0)
+
+/* STM32H7_ADC_CALFACT2 - bit fields */
+#define STM32H7_LINCALFACT_SHIFT	0
+#define STM32H7_LINCALFACT_MASK		GENMASK(29, 0)
+
+/* STM32H7_ADC_CSR - bit fields */
+#define STM32H7_EOC_SLV			BIT(18)
+#define STM32H7_EOC_MST			BIT(2)
+
+/* STM32H7_ADC_CCR - bit fields */
+#define STM32H7_PRESC_SHIFT		18
+#define STM32H7_PRESC_MASK		GENMASK(21, 18)
+#define STM32H7_CKMODE_SHIFT		16
+#define STM32H7_CKMODE_MASK		GENMASK(17, 16)
+
 /**
  * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
  * @base:		control registers base cpu addr
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/iio/light/opt3001.c linux-libre-4.19.80-gnu/drivers/iio/light/opt3001.c
--- linux-libre-4.19.79-gnu/drivers/iio/light/opt3001.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/iio/light/opt3001.c	2019-10-17 16:45:44.000000000 -0400
@@ -694,6 +694,7 @@ static irqreturn_t opt3001_irq(int irq,
 	struct iio_dev *iio = _iio;
 	struct opt3001 *opt = iio_priv(iio);
 	int ret;
+	bool wake_result_ready_queue = false;
 
 	if (!opt->ok_to_ignore_lock)
 		mutex_lock(&opt->lock);
@@ -728,13 +729,16 @@ static irqreturn_t opt3001_irq(int irq,
 		}
 		opt->result = ret;
 		opt->result_ready = true;
-		wake_up(&opt->result_ready_queue);
+		wake_result_ready_queue = true;
 	}
 
 out:
 	if (!opt->ok_to_ignore_lock)
 		mutex_unlock(&opt->lock);
 
+	if (wake_result_ready_queue)
+		wake_up(&opt->result_ready_queue);
+
 	return IRQ_HANDLED;
 }
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/media/usb/stkwebcam/stk-webcam.c linux-libre-4.19.80-gnu/drivers/media/usb/stkwebcam/stk-webcam.c
--- linux-libre-4.19.79-gnu/drivers/media/usb/stkwebcam/stk-webcam.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/media/usb/stkwebcam/stk-webcam.c	2019-10-17 16:45:44.000000000 -0400
@@ -641,8 +641,7 @@ static int v4l_stk_release(struct file *
 		dev->owner = NULL;
 	}
 
-	if (is_present(dev))
-		usb_autopm_put_interface(dev->interface);
+	usb_autopm_put_interface(dev->interface);
 	mutex_unlock(&dev->lock);
 	return v4l2_fh_release(fp);
 }
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/misc/mei/bus-fixup.c linux-libre-4.19.80-gnu/drivers/misc/mei/bus-fixup.c
--- linux-libre-4.19.79-gnu/drivers/misc/mei/bus-fixup.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/misc/mei/bus-fixup.c	2019-10-17 16:45:44.000000000 -0400
@@ -214,13 +214,21 @@ static void mei_mkhi_fix(struct mei_cl_d
 {
 	int ret;
 
+	/* No need to enable the client if nothing is needed from it */
+	if (!cldev->bus->fw_f_fw_ver_supported &&
+	    !cldev->bus->hbm_f_os_supported)
+		return;
+
 	ret = mei_cldev_enable(cldev);
 	if (ret)
 		return;
 
-	ret = mei_fwver(cldev);
-	if (ret < 0)
-		dev_err(&cldev->dev, "FW version command failed %d\n", ret);
+	if (cldev->bus->fw_f_fw_ver_supported) {
+		ret = mei_fwver(cldev);
+		if (ret < 0)
+			dev_err(&cldev->dev, "FW version command failed %d\n",
+				ret);
+	}
 
 	if (cldev->bus->hbm_f_os_supported) {
 		ret = mei_osver(cldev);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/misc/mei/hw-me.c linux-libre-4.19.80-gnu/drivers/misc/mei/hw-me.c
--- linux-libre-4.19.79-gnu/drivers/misc/mei/hw-me.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/misc/mei/hw-me.c	2019-10-17 16:45:44.000000000 -0400
@@ -1368,6 +1368,8 @@ static bool mei_me_fw_type_sps(struct pc
 #define MEI_CFG_FW_SPS                           \
 	.quirk_probe = mei_me_fw_type_sps
 
+#define MEI_CFG_FW_VER_SUPP                     \
+	.fw_ver_supported = 1
 
 #define MEI_CFG_ICH_HFS                      \
 	.fw_status.count = 0
@@ -1405,31 +1407,41 @@ static const struct mei_cfg mei_me_ich10
 	MEI_CFG_ICH10_HFS,
 };
 
-/* PCH devices */
-static const struct mei_cfg mei_me_pch_cfg = {
+/* PCH6 devices */
+static const struct mei_cfg mei_me_pch6_cfg = {
 	MEI_CFG_PCH_HFS,
 };
 
+/* PCH7 devices */
+static const struct mei_cfg mei_me_pch7_cfg = {
+	MEI_CFG_PCH_HFS,
+	MEI_CFG_FW_VER_SUPP,
+};
+
 /* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */
 static const struct mei_cfg mei_me_pch_cpt_pbg_cfg = {
 	MEI_CFG_PCH_HFS,
+	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_FW_NM,
 };
 
 /* PCH8 Lynx Point and newer devices */
 static const struct mei_cfg mei_me_pch8_cfg = {
 	MEI_CFG_PCH8_HFS,
+	MEI_CFG_FW_VER_SUPP,
 };
 
 /* PCH8 Lynx Point with quirk for SPS Firmware exclusion */
 static const struct mei_cfg mei_me_pch8_sps_cfg = {
 	MEI_CFG_PCH8_HFS,
+	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_FW_SPS,
 };
 
 /* Cannon Lake and newer devices */
 static const struct mei_cfg mei_me_pch12_cfg = {
 	MEI_CFG_PCH8_HFS,
+	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_DMA_128,
 };
 
@@ -1441,7 +1453,8 @@ static const struct mei_cfg *const mei_c
 	[MEI_ME_UNDEF_CFG] = NULL,
 	[MEI_ME_ICH_CFG] = &mei_me_ich_cfg,
 	[MEI_ME_ICH10_CFG] = &mei_me_ich10_cfg,
-	[MEI_ME_PCH_CFG] = &mei_me_pch_cfg,
+	[MEI_ME_PCH6_CFG] = &mei_me_pch6_cfg,
+	[MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg,
 	[MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg,
 	[MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg,
 	[MEI_ME_PCH8_SPS_CFG] = &mei_me_pch8_sps_cfg,
@@ -1480,6 +1493,8 @@ struct mei_device *mei_me_dev_init(struc
 
 	mei_device_init(dev, &pdev->dev, &mei_me_hw_ops);
 	hw->cfg = cfg;
+	dev->fw_f_fw_ver_supported = cfg->fw_ver_supported;
+
 	return dev;
 }
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/misc/mei/hw-me.h linux-libre-4.19.80-gnu/drivers/misc/mei/hw-me.h
--- linux-libre-4.19.79-gnu/drivers/misc/mei/hw-me.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/misc/mei/hw-me.h	2019-10-17 16:45:44.000000000 -0400
@@ -32,11 +32,13 @@
  * @fw_status: FW status
  * @quirk_probe: device exclusion quirk
  * @dma_size: device DMA buffers size
+ * @fw_ver_supported: is fw version retrievable from FW
  */
 struct mei_cfg {
 	const struct mei_fw_status fw_status;
 	bool (*quirk_probe)(struct pci_dev *pdev);
 	size_t dma_size[DMA_DSCR_NUM];
+	u32 fw_ver_supported:1;
 };
 
 
@@ -74,7 +76,8 @@ struct mei_me_hw {
  * @MEI_ME_UNDEF_CFG:      Lower sentinel.
  * @MEI_ME_ICH_CFG:        I/O Controller Hub legacy devices.
  * @MEI_ME_ICH10_CFG:      I/O Controller Hub platforms Gen10
- * @MEI_ME_PCH_CFG:        Platform Controller Hub platforms (Up to Gen8).
+ * @MEI_ME_PCH6_CFG:       Platform Controller Hub platforms (Gen6).
+ * @MEI_ME_PCH7_CFG:       Platform Controller Hub platforms (Gen7).
  * @MEI_ME_PCH_CPT_PBG_CFG:Platform Controller Hub workstations
  *                         with quirk for Node Manager exclusion.
  * @MEI_ME_PCH8_CFG:       Platform Controller Hub Gen8 and newer
@@ -89,7 +92,8 @@ enum mei_cfg_idx {
 	MEI_ME_UNDEF_CFG,
 	MEI_ME_ICH_CFG,
 	MEI_ME_ICH10_CFG,
-	MEI_ME_PCH_CFG,
+	MEI_ME_PCH6_CFG,
+	MEI_ME_PCH7_CFG,
 	MEI_ME_PCH_CPT_PBG_CFG,
 	MEI_ME_PCH8_CFG,
 	MEI_ME_PCH8_SPS_CFG,
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/misc/mei/hw-me-regs.h linux-libre-4.19.80-gnu/drivers/misc/mei/hw-me-regs.h
--- linux-libre-4.19.79-gnu/drivers/misc/mei/hw-me-regs.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/misc/mei/hw-me-regs.h	2019-10-17 16:45:44.000000000 -0400
@@ -139,6 +139,9 @@
 #define MEI_DEV_ID_CNP_H      0xA360  /* Cannon Point H */
 #define MEI_DEV_ID_CNP_H_4    0xA364  /* Cannon Point H 4 (iTouch) */
 
+#define MEI_DEV_ID_CMP_LP     0x02e0  /* Comet Point LP */
+#define MEI_DEV_ID_CMP_LP_3   0x02e4  /* Comet Point LP 3 (iTouch) */
+
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
 
 #define MEI_DEV_ID_TGP_LP     0xA0E0  /* Tiger Lake Point LP */
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/misc/mei/mei_dev.h linux-libre-4.19.80-gnu/drivers/misc/mei/mei_dev.h
--- linux-libre-4.19.79-gnu/drivers/misc/mei/mei_dev.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/misc/mei/mei_dev.h	2019-10-17 16:45:44.000000000 -0400
@@ -422,6 +422,8 @@ struct mei_fw_version {
  *
  * @fw_ver : FW versions
  *
+ * @fw_f_fw_ver_supported : fw feature: fw version supported
+ *
  * @me_clients_rwsem: rw lock over me_clients list
  * @me_clients  : list of FW clients
  * @me_clients_map : FW clients bit map
@@ -500,6 +502,8 @@ struct mei_device {
 
 	struct mei_fw_version fw_ver[MEI_MAX_FW_VER_BLOCKS];
 
+	unsigned int fw_f_fw_ver_supported:1;
+
 	struct rw_semaphore me_clients_rwsem;
 	struct list_head me_clients;
 	DECLARE_BITMAP(me_clients_map, MEI_CLIENTS_MAX);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/misc/mei/pci-me.c linux-libre-4.19.80-gnu/drivers/misc/mei/pci-me.c
--- linux-libre-4.19.79-gnu/drivers/misc/mei/pci-me.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/misc/mei/pci-me.c	2019-10-17 16:45:44.000000000 -0400
@@ -70,13 +70,13 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_3, MEI_ME_ICH10_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_4, MEI_ME_ICH10_CFG)},
 
-	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, MEI_ME_PCH_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, MEI_ME_PCH_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, MEI_ME_PCH6_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, MEI_ME_PCH6_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CPT_1, MEI_ME_PCH_CPT_PBG_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_PBG_1, MEI_ME_PCH_CPT_PBG_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH7_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH7_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH7_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, MEI_ME_PCH8_SPS_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, MEI_ME_PCH8_SPS_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_LPT_LP, MEI_ME_PCH8_CFG)},
@@ -105,6 +105,9 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP, MEI_ME_PCH12_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_CFG)},
+
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH12_CFG)},
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/pci/controller/vmd.c linux-libre-4.19.80-gnu/drivers/pci/controller/vmd.c
--- linux-libre-4.19.79-gnu/drivers/pci/controller/vmd.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/pci/controller/vmd.c	2019-10-17 16:45:44.000000000 -0400
@@ -97,6 +97,7 @@ struct vmd_dev {
 	struct resource		resources[3];
 	struct irq_domain	*irq_domain;
 	struct pci_bus		*bus;
+	u8			busn_start;
 
 #ifdef CONFIG_X86_DEV_DMA_OPS
 	struct dma_map_ops	dma_ops;
@@ -468,7 +469,8 @@ static char __iomem *vmd_cfg_addr(struct
 				  unsigned int devfn, int reg, int len)
 {
 	char __iomem *addr = vmd->cfgbar +
-			     (bus->number << 20) + (devfn << 12) + reg;
+			     ((bus->number - vmd->busn_start) << 20) +
+			     (devfn << 12) + reg;
 
 	if ((addr - vmd->cfgbar) + len >=
 	    resource_size(&vmd->dev->resource[VMD_CFGBAR]))
@@ -591,7 +593,7 @@ static int vmd_enable_domain(struct vmd_
 	unsigned long flags;
 	LIST_HEAD(resources);
 	resource_size_t offset[2] = {0};
-	resource_size_t membar2_offset = 0x2000, busn_start = 0;
+	resource_size_t membar2_offset = 0x2000;
 
 	/*
 	 * Shadow registers may exist in certain VMD device ids which allow
@@ -633,14 +635,14 @@ static int vmd_enable_domain(struct vmd_
 		pci_read_config_dword(vmd->dev, PCI_REG_VMCONFIG, &vmconfig);
 		if (BUS_RESTRICT_CAP(vmcap) &&
 		    (BUS_RESTRICT_CFG(vmconfig) == 0x1))
-			busn_start = 128;
+			vmd->busn_start = 128;
 	}
 
 	res = &vmd->dev->resource[VMD_CFGBAR];
 	vmd->resources[0] = (struct resource) {
 		.name  = "VMD CFGBAR",
-		.start = busn_start,
-		.end   = busn_start + (resource_size(res) >> 20) - 1,
+		.start = vmd->busn_start,
+		.end   = vmd->busn_start + (resource_size(res) >> 20) - 1,
 		.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
 	};
 
@@ -708,8 +710,8 @@ static int vmd_enable_domain(struct vmd_
 	pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]);
 	pci_add_resource_offset(&resources, &vmd->resources[2], offset[1]);
 
-	vmd->bus = pci_create_root_bus(&vmd->dev->dev, busn_start, &vmd_ops,
-				       sd, &resources);
+	vmd->bus = pci_create_root_bus(&vmd->dev->dev, vmd->busn_start,
+					&vmd_ops, sd, &resources);
 	if (!vmd->bus) {
 		pci_free_resource_list(&resources);
 		irq_domain_remove(vmd->irq_domain);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/staging/fbtft/fbtft-core.c linux-libre-4.19.80-gnu/drivers/staging/fbtft/fbtft-core.c
--- linux-libre-4.19.79-gnu/drivers/staging/fbtft/fbtft-core.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/staging/fbtft/fbtft-core.c	2019-10-17 16:45:44.000000000 -0400
@@ -819,7 +819,7 @@ struct fb_info *fbtft_framebuffer_alloc(
 	if (par->gamma.curves && gamma) {
 		if (fbtft_gamma_parse_str(par, par->gamma.curves, gamma,
 					  strlen(gamma)))
-			goto alloc_fail;
+			goto release_framebuf;
 	}
 
 	/* Transmit buffer */
@@ -836,7 +836,7 @@ struct fb_info *fbtft_framebuffer_alloc(
 	if (txbuflen > 0) {
 		txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL);
 		if (!txbuf)
-			goto alloc_fail;
+			goto release_framebuf;
 		par->txbuf.buf = txbuf;
 		par->txbuf.len = txbuflen;
 	}
@@ -872,6 +872,9 @@ struct fb_info *fbtft_framebuffer_alloc(
 
 	return info;
 
+release_framebuf:
+	framebuffer_release(info);
+
 alloc_fail:
 	vfree(vmem);
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/staging/vt6655/device_main.c linux-libre-4.19.80-gnu/drivers/staging/vt6655/device_main.c
--- linux-libre-4.19.79-gnu/drivers/staging/vt6655/device_main.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/staging/vt6655/device_main.c	2019-10-17 16:45:44.000000000 -0400
@@ -1755,8 +1755,10 @@ vt6655_probe(struct pci_dev *pcid, const
 
 	priv->hw->max_signal = 100;
 
-	if (vnt_init(priv))
+	if (vnt_init(priv)) {
+		device_free_info(priv);
 		return -ENODEV;
+	}
 
 	device_print_info(priv);
 	pci_set_drvdata(pcid, priv);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/tty/serial/uartlite.c linux-libre-4.19.80-gnu/drivers/tty/serial/uartlite.c
--- linux-libre-4.19.79-gnu/drivers/tty/serial/uartlite.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/tty/serial/uartlite.c	2019-10-17 16:45:44.000000000 -0400
@@ -837,7 +837,8 @@ err_uart:
 static void __exit ulite_exit(void)
 {
 	platform_driver_unregister(&ulite_platform_driver);
-	uart_unregister_driver(&ulite_uart_driver);
+	if (ulite_uart_driver.state)
+		uart_unregister_driver(&ulite_uart_driver);
 }
 
 module_init(ulite_init);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/class/usblp.c linux-libre-4.19.80-gnu/drivers/usb/class/usblp.c
--- linux-libre-4.19.79-gnu/drivers/usb/class/usblp.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/class/usblp.c	2019-10-17 16:45:44.000000000 -0400
@@ -461,10 +461,12 @@ static int usblp_release(struct inode *i
 
 	mutex_lock(&usblp_mutex);
 	usblp->used = 0;
-	if (usblp->present) {
+	if (usblp->present)
 		usblp_unlink_urbs(usblp);
-		usb_autopm_put_interface(usblp->intf);
-	} else		/* finish cleanup from disconnect */
+
+	usb_autopm_put_interface(usblp->intf);
+
+	if (!usblp->present)		/* finish cleanup from disconnect */
 		usblp_cleanup(usblp);
 	mutex_unlock(&usblp_mutex);
 	return 0;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/gadget/udc/dummy_hcd.c linux-libre-4.19.80-gnu/drivers/usb/gadget/udc/dummy_hcd.c
--- linux-libre-4.19.79-gnu/drivers/usb/gadget/udc/dummy_hcd.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/gadget/udc/dummy_hcd.c	2019-10-17 16:45:44.000000000 -0400
@@ -48,6 +48,7 @@
 #define DRIVER_VERSION	"02 May 2005"
 
 #define POWER_BUDGET	500	/* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3	900	/* in mA */
 
 static const char	driver_name[] = "dummy_hcd";
 static const char	driver_desc[] = "USB Host+Gadget Emulator";
@@ -2446,7 +2447,7 @@ static int dummy_start_ss(struct dummy_h
 	dum_hcd->rh_state = DUMMY_RH_RUNNING;
 	dum_hcd->stream_en_ep = 0;
 	INIT_LIST_HEAD(&dum_hcd->urbp_list);
-	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
 	dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
 	dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
 #ifdef CONFIG_USB_OTG
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/host/xhci.c linux-libre-4.19.80-gnu/drivers/usb/host/xhci.c
--- linux-libre-4.19.79-gnu/drivers/usb/host/xhci.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/host/xhci.c	2019-10-17 16:45:44.000000000 -0400
@@ -1022,7 +1022,7 @@ int xhci_suspend(struct xhci_hcd *xhci,
 	writel(command, &xhci->op_regs->command);
 	xhci->broken_suspend = 0;
 	if (xhci_handshake(&xhci->op_regs->status,
-				STS_SAVE, 0, 10 * 1000)) {
+				STS_SAVE, 0, 20 * 1000)) {
 	/*
 	 * AMD SNPS xHC 3.0 occasionally does not clear the
 	 * SSS bit of USBSTS and when driver tries to poll
@@ -1098,6 +1098,18 @@ int xhci_resume(struct xhci_hcd *xhci, b
 		hibernated = true;
 
 	if (!hibernated) {
+		/*
+		 * Some controllers might lose power during suspend, so wait
+		 * for controller not ready bit to clear, just as in xHC init.
+		 */
+		retval = xhci_handshake(&xhci->op_regs->status,
+					STS_CNR, 0, 10 * 1000 * 1000);
+		if (retval) {
+			xhci_warn(xhci, "Controller not ready at resume %d\n",
+				  retval);
+			spin_unlock_irq(&xhci->lock);
+			return retval;
+		}
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */
@@ -3053,6 +3065,7 @@ static void xhci_endpoint_reset(struct u
 	unsigned int ep_index;
 	unsigned long flags;
 	u32 ep_flag;
+	int err;
 
 	xhci = hcd_to_xhci(hcd);
 	if (!host_ep->hcpriv)
@@ -3102,7 +3115,17 @@ static void xhci_endpoint_reset(struct u
 		xhci_free_command(xhci, cfg_cmd);
 		goto cleanup;
 	}
-	xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0);
+
+	err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id,
+					ep_index, 0);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
@@ -3116,8 +3139,16 @@ static void xhci_endpoint_reset(struct u
 					   ctrl_ctx, ep_flag, ep_flag);
 	xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
 
-	xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
+	err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
 				      udev->slot_id, false);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
@@ -4631,12 +4662,12 @@ static int xhci_update_timeout_for_endpo
 	alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
 		desc, state, timeout);
 
-	/* If we found we can't enable hub-initiated LPM, or
+	/* If we found we can't enable hub-initiated LPM, and
 	 * the U1 or U2 exit latency was too high to allow
-	 * device-initiated LPM as well, just stop searching.
+	 * device-initiated LPM as well, then we will disable LPM
+	 * for this device, so stop searching any further.
 	 */
-	if (alt_timeout == USB3_LPM_DISABLED ||
-			alt_timeout == USB3_LPM_DEVICE_INITIATED) {
+	if (alt_timeout == USB3_LPM_DISABLED) {
 		*timeout = alt_timeout;
 		return -E2BIG;
 	}
@@ -4747,10 +4778,12 @@ static u16 xhci_calculate_lpm_timeout(st
 		if (intf->dev.driver) {
 			driver = to_usb_driver(intf->dev.driver);
 			if (driver && driver->disable_hub_initiated_lpm) {
-				dev_dbg(&udev->dev, "Hub-initiated %s disabled "
-						"at request of driver %s\n",
-						state_name, driver->name);
-				return xhci_get_timeout_no_hub_lpm(udev, state);
+				dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+					state_name, driver->name);
+				timeout = xhci_get_timeout_no_hub_lpm(udev,
+								      state);
+				if (timeout == USB3_LPM_DISABLED)
+					return timeout;
 			}
 		}
 
@@ -5034,11 +5067,18 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 		hcd->has_tt = 1;
 	} else {
 		/*
-		 * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol
-		 * minor revision instead of sbrn. Minor revision is a two digit
-		 * BCD containing minor and sub-minor numbers, only show minor.
+		 * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
+		 * should return 0x31 for sbrn, or that the minor revision
+		 * is a two digit BCD containig minor and sub-minor numbers.
+		 * This was later clarified in xHCI 1.2.
+		 *
+		 * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
+		 * minor revision set to 0x1 instead of 0x10.
 		 */
-		minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+		if (xhci->usb3_rhub.min_rev == 0x1)
+			minor_rev = 1;
+		else
+			minor_rev = xhci->usb3_rhub.min_rev / 0x10;
 
 		switch (minor_rev) {
 		case 2:
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/host/xhci-ring.c linux-libre-4.19.80-gnu/drivers/usb/host/xhci-ring.c
--- linux-libre-4.19.79-gnu/drivers/usb/host/xhci-ring.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/host/xhci-ring.c	2019-10-17 16:45:44.000000000 -0400
@@ -3154,10 +3154,10 @@ static int xhci_align_td(struct xhci_hcd
 	if (usb_urb_dir_out(urb)) {
 		len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
 				   seg->bounce_buf, new_buff_len, enqd_len);
-		if (len != seg->bounce_len)
+		if (len != new_buff_len)
 			xhci_warn(xhci,
 				"WARN Wrong bounce buffer write length: %zu != %d\n",
-				len, seg->bounce_len);
+				len, new_buff_len);
 		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
 						 max_pkt, DMA_TO_DEVICE);
 	} else {
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/image/microtek.c linux-libre-4.19.80-gnu/drivers/usb/image/microtek.c
--- linux-libre-4.19.79-gnu/drivers/usb/image/microtek.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/image/microtek.c	2019-10-17 16:45:44.000000000 -0400
@@ -721,6 +721,10 @@ static int mts_usb_probe(struct usb_inte
 
 	}
 
+	if (ep_in_current != &ep_in_set[2]) {
+		MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n");
+		return -ENODEV;
+	}
 
 	if ( ep_out == -1 ) {
 		MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/adutux.c linux-libre-4.19.80-gnu/drivers/usb/misc/adutux.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/adutux.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/adutux.c	2019-10-17 16:45:44.000000000 -0400
@@ -75,6 +75,7 @@ struct adu_device {
 	char			serial_number[8];
 
 	int			open_count; /* number of times this port has been opened */
+	unsigned long		disconnected:1;
 
 	char		*read_buffer_primary;
 	int			read_buffer_length;
@@ -116,7 +117,7 @@ static void adu_abort_transfers(struct a
 {
 	unsigned long flags;
 
-	if (dev->udev == NULL)
+	if (dev->disconnected)
 		return;
 
 	/* shutdown transfer */
@@ -148,6 +149,7 @@ static void adu_delete(struct adu_device
 	kfree(dev->read_buffer_secondary);
 	kfree(dev->interrupt_in_buffer);
 	kfree(dev->interrupt_out_buffer);
+	usb_put_dev(dev->udev);
 	kfree(dev);
 }
 
@@ -243,7 +245,7 @@ static int adu_open(struct inode *inode,
 	}
 
 	dev = usb_get_intfdata(interface);
-	if (!dev || !dev->udev) {
+	if (!dev) {
 		retval = -ENODEV;
 		goto exit_no_device;
 	}
@@ -326,7 +328,7 @@ static int adu_release(struct inode *ino
 	}
 
 	adu_release_internal(dev);
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		/* the device was unplugged before the file was released */
 		if (!dev->open_count)	/* ... and we're the last user */
 			adu_delete(dev);
@@ -355,7 +357,7 @@ static ssize_t adu_read(struct file *fil
 		return -ERESTARTSYS;
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto exit;
@@ -520,7 +522,7 @@ static ssize_t adu_write(struct file *fi
 		goto exit_nolock;
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto exit;
@@ -665,7 +667,7 @@ static int adu_probe(struct usb_interfac
 
 	mutex_init(&dev->mtx);
 	spin_lock_init(&dev->buflock);
-	dev->udev = udev;
+	dev->udev = usb_get_dev(udev);
 	init_waitqueue_head(&dev->read_wait);
 	init_waitqueue_head(&dev->write_wait);
 
@@ -764,14 +766,18 @@ static void adu_disconnect(struct usb_in
 
 	dev = usb_get_intfdata(interface);
 
-	mutex_lock(&dev->mtx);	/* not interruptible */
-	dev->udev = NULL;	/* poison */
 	usb_deregister_dev(interface, &adu_class);
-	mutex_unlock(&dev->mtx);
+
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
 
 	mutex_lock(&adutux_mutex);
 	usb_set_intfdata(interface, NULL);
 
+	mutex_lock(&dev->mtx);	/* not interruptible */
+	dev->disconnected = 1;
+	mutex_unlock(&dev->mtx);
+
 	/* if the device is not opened, then we clean up right now */
 	if (!dev->open_count)
 		adu_delete(dev);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/chaoskey.c linux-libre-4.19.80-gnu/drivers/usb/misc/chaoskey.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/chaoskey.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/chaoskey.c	2019-10-17 16:45:44.000000000 -0400
@@ -98,6 +98,7 @@ static void chaoskey_free(struct chaoske
 		usb_free_urb(dev->urb);
 		kfree(dev->name);
 		kfree(dev->buf);
+		usb_put_intf(dev->interface);
 		kfree(dev);
 	}
 }
@@ -145,6 +146,8 @@ static int chaoskey_probe(struct usb_int
 	if (dev == NULL)
 		goto out;
 
+	dev->interface = usb_get_intf(interface);
+
 	dev->buf = kmalloc(size, GFP_KERNEL);
 
 	if (dev->buf == NULL)
@@ -174,8 +177,6 @@ static int chaoskey_probe(struct usb_int
 			goto out;
 	}
 
-	dev->interface = interface;
-
 	dev->in_ep = in_ep;
 
 	if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/iowarrior.c linux-libre-4.19.80-gnu/drivers/usb/misc/iowarrior.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/iowarrior.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/iowarrior.c	2019-10-17 16:45:44.000000000 -0400
@@ -87,6 +87,7 @@ struct iowarrior {
 	char chip_serial[9];		/* the serial number string of the chip connected */
 	int report_size;		/* number of bytes in a report */
 	u16 product_id;
+	struct usb_anchor submitted;
 };
 
 /*--------------*/
@@ -243,6 +244,7 @@ static inline void iowarrior_delete(stru
 	kfree(dev->int_in_buffer);
 	usb_free_urb(dev->int_in_urb);
 	kfree(dev->read_queue);
+	usb_put_intf(dev->interface);
 	kfree(dev);
 }
 
@@ -424,11 +426,13 @@ static ssize_t iowarrior_write(struct fi
 			retval = -EFAULT;
 			goto error;
 		}
+		usb_anchor_urb(int_out_urb, &dev->submitted);
 		retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
 		if (retval) {
 			dev_dbg(&dev->interface->dev,
 				"submit error %d for urb nr.%d\n",
 				retval, atomic_read(&dev->write_busy));
+			usb_unanchor_urb(int_out_urb);
 			goto error;
 		}
 		/* submit was ok */
@@ -764,11 +768,13 @@ static int iowarrior_probe(struct usb_in
 	init_waitqueue_head(&dev->write_wait);
 
 	dev->udev = udev;
-	dev->interface = interface;
+	dev->interface = usb_get_intf(interface);
 
 	iface_desc = interface->cur_altsetting;
 	dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
 
+	init_usb_anchor(&dev->submitted);
+
 	res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint);
 	if (res) {
 		dev_err(&interface->dev, "no interrupt-in endpoint found\n");
@@ -866,8 +872,6 @@ static void iowarrior_disconnect(struct
 	dev = usb_get_intfdata(interface);
 	mutex_lock(&iowarrior_open_disc_lock);
 	usb_set_intfdata(interface, NULL);
-	/* prevent device read, write and ioctl */
-	dev->present = 0;
 
 	minor = dev->minor;
 	mutex_unlock(&iowarrior_open_disc_lock);
@@ -878,8 +882,7 @@ static void iowarrior_disconnect(struct
 	mutex_lock(&dev->mutex);
 
 	/* prevent device read, write and ioctl */
-
-	mutex_unlock(&dev->mutex);
+	dev->present = 0;
 
 	if (dev->opened) {
 		/* There is a process that holds a filedescriptor to the device ,
@@ -887,10 +890,13 @@ static void iowarrior_disconnect(struct
 		   Deleting the device is postponed until close() was called.
 		 */
 		usb_kill_urb(dev->int_in_urb);
+		usb_kill_anchored_urbs(&dev->submitted);
 		wake_up_interruptible(&dev->read_wait);
 		wake_up_interruptible(&dev->write_wait);
+		mutex_unlock(&dev->mutex);
 	} else {
 		/* no process is using the device, cleanup now */
+		mutex_unlock(&dev->mutex);
 		iowarrior_delete(dev);
 	}
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/Kconfig linux-libre-4.19.80-gnu/drivers/usb/misc/Kconfig
--- linux-libre-4.19.79-gnu/drivers/usb/misc/Kconfig	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/Kconfig	2019-10-17 16:45:44.000000000 -0400
@@ -46,16 +46,6 @@ config USB_SEVSEG
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbsevseg.
 
-config USB_RIO500
-	tristate "USB Diamond Rio500 support"
-	help
-	  Say Y here if you want to connect a USB Rio500 mp3 player to your
-	  computer's USB port. Please read <file:Documentation/usb/rio.txt>
-	  for more information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rio500.
-
 config USB_LEGOTOWER
 	tristate "USB Lego Infrared Tower support"
 	help
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/ldusb.c linux-libre-4.19.80-gnu/drivers/usb/misc/ldusb.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/ldusb.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/ldusb.c	2019-10-17 16:45:44.000000000 -0400
@@ -153,6 +153,7 @@ MODULE_PARM_DESC(min_interrupt_out_inter
 struct ld_usb {
 	struct mutex		mutex;		/* locks this structure */
 	struct usb_interface	*intf;		/* save off the usb interface pointer */
+	unsigned long		disconnected:1;
 
 	int			open_count;	/* number of times this port has been opened */
 
@@ -192,12 +193,10 @@ static void ld_usb_abort_transfers(struc
 	/* shutdown transfer */
 	if (dev->interrupt_in_running) {
 		dev->interrupt_in_running = 0;
-		if (dev->intf)
-			usb_kill_urb(dev->interrupt_in_urb);
+		usb_kill_urb(dev->interrupt_in_urb);
 	}
 	if (dev->interrupt_out_busy)
-		if (dev->intf)
-			usb_kill_urb(dev->interrupt_out_urb);
+		usb_kill_urb(dev->interrupt_out_urb);
 }
 
 /**
@@ -205,8 +204,6 @@ static void ld_usb_abort_transfers(struc
  */
 static void ld_usb_delete(struct ld_usb *dev)
 {
-	ld_usb_abort_transfers(dev);
-
 	/* free data structures */
 	usb_free_urb(dev->interrupt_in_urb);
 	usb_free_urb(dev->interrupt_out_urb);
@@ -263,7 +260,7 @@ static void ld_usb_interrupt_in_callback
 
 resubmit:
 	/* resubmit if we're still running */
-	if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) {
+	if (dev->interrupt_in_running && !dev->buffer_overflow) {
 		retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
 		if (retval) {
 			dev_err(&dev->intf->dev,
@@ -392,7 +389,7 @@ static int ld_usb_release(struct inode *
 		retval = -ENODEV;
 		goto unlock_exit;
 	}
-	if (dev->intf == NULL) {
+	if (dev->disconnected) {
 		/* the device was unplugged before the file was released */
 		mutex_unlock(&dev->mutex);
 		/* unlock here as ld_usb_delete frees dev */
@@ -423,7 +420,7 @@ static __poll_t ld_usb_poll(struct file
 
 	dev = file->private_data;
 
-	if (!dev->intf)
+	if (dev->disconnected)
 		return EPOLLERR | EPOLLHUP;
 
 	poll_wait(file, &dev->read_wait, wait);
@@ -462,7 +459,7 @@ static ssize_t ld_usb_read(struct file *
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->intf == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -542,7 +539,7 @@ static ssize_t ld_usb_write(struct file
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->intf == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -764,6 +761,9 @@ static void ld_usb_disconnect(struct usb
 	/* give back our minor */
 	usb_deregister_dev(intf, &ld_usb_class);
 
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
+
 	mutex_lock(&dev->mutex);
 
 	/* if the device is not opened, then we clean up right now */
@@ -771,7 +771,7 @@ static void ld_usb_disconnect(struct usb
 		mutex_unlock(&dev->mutex);
 		ld_usb_delete(dev);
 	} else {
-		dev->intf = NULL;
+		dev->disconnected = 1;
 		/* wake up pollers */
 		wake_up_interruptible_all(&dev->read_wait);
 		wake_up_interruptible_all(&dev->write_wait);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/legousbtower.c linux-libre-4.19.80-gnu/drivers/usb/misc/legousbtower.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/legousbtower.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/legousbtower.c	2019-10-17 16:45:44.000000000 -0400
@@ -179,7 +179,6 @@ static const struct usb_device_id tower_
 };
 
 MODULE_DEVICE_TABLE (usb, tower_table);
-static DEFINE_MUTEX(open_disc_mutex);
 
 #define LEGO_USB_TOWER_MINOR_BASE	160
 
@@ -191,6 +190,7 @@ struct lego_usb_tower {
 	unsigned char		minor;		/* the starting minor number for this device */
 
 	int			open_count;	/* number of times this port has been opened */
+	unsigned long		disconnected:1;
 
 	char*			read_buffer;
 	size_t			read_buffer_length; /* this much came in */
@@ -290,14 +290,13 @@ static inline void lego_usb_tower_debug_
  */
 static inline void tower_delete (struct lego_usb_tower *dev)
 {
-	tower_abort_transfers (dev);
-
 	/* free data structures */
 	usb_free_urb(dev->interrupt_in_urb);
 	usb_free_urb(dev->interrupt_out_urb);
 	kfree (dev->read_buffer);
 	kfree (dev->interrupt_in_buffer);
 	kfree (dev->interrupt_out_buffer);
+	usb_put_dev(dev->udev);
 	kfree (dev);
 }
 
@@ -332,18 +331,14 @@ static int tower_open (struct inode *ino
 		goto exit;
 	}
 
-	mutex_lock(&open_disc_mutex);
 	dev = usb_get_intfdata(interface);
-
 	if (!dev) {
-		mutex_unlock(&open_disc_mutex);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	/* lock this device */
 	if (mutex_lock_interruptible(&dev->lock)) {
-		mutex_unlock(&open_disc_mutex);
 	        retval = -ERESTARTSYS;
 		goto exit;
 	}
@@ -351,12 +346,9 @@ static int tower_open (struct inode *ino
 
 	/* allow opening only once */
 	if (dev->open_count) {
-		mutex_unlock(&open_disc_mutex);
 		retval = -EBUSY;
 		goto unlock_exit;
 	}
-	dev->open_count = 1;
-	mutex_unlock(&open_disc_mutex);
 
 	/* reset the tower */
 	result = usb_control_msg (dev->udev,
@@ -396,13 +388,14 @@ static int tower_open (struct inode *ino
 		dev_err(&dev->udev->dev,
 			"Couldn't submit interrupt_in_urb %d\n", retval);
 		dev->interrupt_in_running = 0;
-		dev->open_count = 0;
 		goto unlock_exit;
 	}
 
 	/* save device in the file's private structure */
 	file->private_data = dev;
 
+	dev->open_count = 1;
+
 unlock_exit:
 	mutex_unlock(&dev->lock);
 
@@ -423,10 +416,9 @@ static int tower_release (struct inode *
 
 	if (dev == NULL) {
 		retval = -ENODEV;
-		goto exit_nolock;
+		goto exit;
 	}
 
-	mutex_lock(&open_disc_mutex);
 	if (mutex_lock_interruptible(&dev->lock)) {
 	        retval = -ERESTARTSYS;
 		goto exit;
@@ -438,7 +430,8 @@ static int tower_release (struct inode *
 		retval = -ENODEV;
 		goto unlock_exit;
 	}
-	if (dev->udev == NULL) {
+
+	if (dev->disconnected) {
 		/* the device was unplugged before the file was released */
 
 		/* unlock here as tower_delete frees dev */
@@ -456,10 +449,7 @@ static int tower_release (struct inode *
 
 unlock_exit:
 	mutex_unlock(&dev->lock);
-
 exit:
-	mutex_unlock(&open_disc_mutex);
-exit_nolock:
 	return retval;
 }
 
@@ -477,10 +467,9 @@ static void tower_abort_transfers (struc
 	if (dev->interrupt_in_running) {
 		dev->interrupt_in_running = 0;
 		mb();
-		if (dev->udev)
-			usb_kill_urb (dev->interrupt_in_urb);
+		usb_kill_urb(dev->interrupt_in_urb);
 	}
-	if (dev->interrupt_out_busy && dev->udev)
+	if (dev->interrupt_out_busy)
 		usb_kill_urb(dev->interrupt_out_urb);
 }
 
@@ -516,7 +505,7 @@ static __poll_t tower_poll (struct file
 
 	dev = file->private_data;
 
-	if (!dev->udev)
+	if (dev->disconnected)
 		return EPOLLERR | EPOLLHUP;
 
 	poll_wait(file, &dev->read_wait, wait);
@@ -563,7 +552,7 @@ static ssize_t tower_read (struct file *
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -649,7 +638,7 @@ static ssize_t tower_write (struct file
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -759,7 +748,7 @@ static void tower_interrupt_in_callback
 
 resubmit:
 	/* resubmit if we're still running */
-	if (dev->interrupt_in_running && dev->udev) {
+	if (dev->interrupt_in_running) {
 		retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC);
 		if (retval)
 			dev_err(&dev->udev->dev,
@@ -822,8 +811,9 @@ static int tower_probe (struct usb_inter
 
 	mutex_init(&dev->lock);
 
-	dev->udev = udev;
+	dev->udev = usb_get_dev(udev);
 	dev->open_count = 0;
+	dev->disconnected = 0;
 
 	dev->read_buffer = NULL;
 	dev->read_buffer_length = 0;
@@ -891,8 +881,10 @@ static int tower_probe (struct usb_inter
 				  get_version_reply,
 				  sizeof(*get_version_reply),
 				  1000);
-	if (result < 0) {
-		dev_err(idev, "LEGO USB Tower get version control request failed\n");
+	if (result < sizeof(*get_version_reply)) {
+		if (result >= 0)
+			result = -EIO;
+		dev_err(idev, "get version request failed: %d\n", result);
 		retval = result;
 		goto error;
 	}
@@ -910,7 +902,6 @@ static int tower_probe (struct usb_inter
 	if (retval) {
 		/* something prevented us from registering this driver */
 		dev_err(idev, "Not able to get a minor for this device.\n");
-		usb_set_intfdata (interface, NULL);
 		goto error;
 	}
 	dev->minor = interface->minor;
@@ -942,23 +933,24 @@ static void tower_disconnect (struct usb
 	int minor;
 
 	dev = usb_get_intfdata (interface);
-	mutex_lock(&open_disc_mutex);
-	usb_set_intfdata (interface, NULL);
 
 	minor = dev->minor;
 
-	/* give back our minor */
+	/* give back our minor and prevent further open() */
 	usb_deregister_dev (interface, &tower_class);
 
+	/* stop I/O */
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
+
 	mutex_lock(&dev->lock);
-	mutex_unlock(&open_disc_mutex);
 
 	/* if the device is not opened, then we clean up right now */
 	if (!dev->open_count) {
 		mutex_unlock(&dev->lock);
 		tower_delete (dev);
 	} else {
-		dev->udev = NULL;
+		dev->disconnected = 1;
 		/* wake up pollers */
 		wake_up_interruptible_all(&dev->read_wait);
 		wake_up_interruptible_all(&dev->write_wait);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/Makefile linux-libre-4.19.80-gnu/drivers/usb/misc/Makefile
--- linux-libre-4.19.79-gnu/drivers/usb/misc/Makefile	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/Makefile	2019-10-17 16:45:44.000000000 -0400
@@ -17,7 +17,6 @@ obj-$(CONFIG_USB_ISIGHTFW)		+= isight_fi
 obj-$(CONFIG_USB_LCD)			+= usblcd.o
 obj-$(CONFIG_USB_LD)			+= ldusb.o
 obj-$(CONFIG_USB_LEGOTOWER)		+= legousbtower.o
-obj-$(CONFIG_USB_RIO500)		+= rio500.o
 obj-$(CONFIG_USB_TEST)			+= usbtest.o
 obj-$(CONFIG_USB_EHSET_TEST_FIXTURE)    += ehset.o
 obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/rio500.c linux-libre-4.19.80-gnu/drivers/usb/misc/rio500.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/rio500.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/rio500.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,561 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* -*- linux-c -*- */
-
-/* 
- * Driver for USB Rio 500
- *
- * Cesar Miquel (miquel@df.uba.ar)
- * 
- * based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
- *
- * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
- *
- * Changelog:
- * 30/05/2003  replaced lock/unlock kernel with up/down
- *             Daniele Bellucci  bellucda@tiscali.it
- * */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/random.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/usb.h>
-#include <linux/wait.h>
-
-#include "rio500_usb.h"
-
-#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>"
-#define DRIVER_DESC "USB Rio 500 driver"
-
-#define RIO_MINOR	64
-
-/* stall/wait timeout for rio */
-#define NAK_TIMEOUT (HZ)
-
-#define IBUF_SIZE 0x1000
-
-/* Size of the rio buffer */
-#define OBUF_SIZE 0x10000
-
-struct rio_usb_data {
-        struct usb_device *rio_dev;     /* init: probe_rio */
-        unsigned int ifnum;             /* Interface number of the USB device */
-        int isopen;                     /* nz if open */
-        int present;                    /* Device is present on the bus */
-        char *obuf, *ibuf;              /* transfer buffers */
-        char bulk_in_ep, bulk_out_ep;   /* Endpoint assignments */
-        wait_queue_head_t wait_q;       /* for timeouts */
-	struct mutex lock;          /* general race avoidance */
-};
-
-static DEFINE_MUTEX(rio500_mutex);
-static struct rio_usb_data rio_instance;
-
-static int open_rio(struct inode *inode, struct file *file)
-{
-	struct rio_usb_data *rio = &rio_instance;
-
-	/* against disconnect() */
-	mutex_lock(&rio500_mutex);
-	mutex_lock(&(rio->lock));
-
-	if (rio->isopen || !rio->present) {
-		mutex_unlock(&(rio->lock));
-		mutex_unlock(&rio500_mutex);
-		return -EBUSY;
-	}
-	rio->isopen = 1;
-
-	init_waitqueue_head(&rio->wait_q);
-
-	mutex_unlock(&(rio->lock));
-
-	dev_info(&rio->rio_dev->dev, "Rio opened.\n");
-	mutex_unlock(&rio500_mutex);
-
-	return 0;
-}
-
-static int close_rio(struct inode *inode, struct file *file)
-{
-	struct rio_usb_data *rio = &rio_instance;
-
-	/* against disconnect() */
-	mutex_lock(&rio500_mutex);
-	mutex_lock(&(rio->lock));
-
-	rio->isopen = 0;
-	if (!rio->present) {
-		/* cleanup has been delayed */
-		kfree(rio->ibuf);
-		kfree(rio->obuf);
-		rio->ibuf = NULL;
-		rio->obuf = NULL;
-	} else {
-		dev_info(&rio->rio_dev->dev, "Rio closed.\n");
-	}
-	mutex_unlock(&(rio->lock));
-	mutex_unlock(&rio500_mutex);
-	return 0;
-}
-
-static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct RioCommand rio_cmd;
-	struct rio_usb_data *rio = &rio_instance;
-	void __user *data;
-	unsigned char *buffer;
-	int result, requesttype;
-	int retries;
-	int retval=0;
-
-	mutex_lock(&(rio->lock));
-        /* Sanity check to make sure rio is connected, powered, etc */
-        if (rio->present == 0 || rio->rio_dev == NULL) {
-		retval = -ENODEV;
-		goto err_out;
-	}
-
-	switch (cmd) {
-	case RIO_RECV_COMMAND:
-		data = (void __user *) arg;
-		if (data == NULL)
-			break;
-		if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
-			retval = -EFAULT;
-			goto err_out;
-		}
-		if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
-			retval = -EINVAL;
-			goto err_out;
-		}
-		buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
-		if (buffer == NULL) {
-			retval = -ENOMEM;
-			goto err_out;
-		}
-		if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
-			retval = -EFAULT;
-			free_page((unsigned long) buffer);
-			goto err_out;
-		}
-
-		requesttype = rio_cmd.requesttype | USB_DIR_IN |
-		    USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-		dev_dbg(&rio->rio_dev->dev,
-			"sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
-			requesttype, rio_cmd.request, rio_cmd.value,
-			rio_cmd.index, rio_cmd.length);
-		/* Send rio control message */
-		retries = 3;
-		while (retries) {
-			result = usb_control_msg(rio->rio_dev,
-						 usb_rcvctrlpipe(rio-> rio_dev, 0),
-						 rio_cmd.request,
-						 requesttype,
-						 rio_cmd.value,
-						 rio_cmd.index, buffer,
-						 rio_cmd.length,
-						 jiffies_to_msecs(rio_cmd.timeout));
-			if (result == -ETIMEDOUT)
-				retries--;
-			else if (result < 0) {
-				dev_err(&rio->rio_dev->dev,
-					"Error executing ioctrl. code = %d\n",
-					result);
-				retries = 0;
-			} else {
-				dev_dbg(&rio->rio_dev->dev,
-					"Executed ioctl. Result = %d (data=%02x)\n",
-					result, buffer[0]);
-				if (copy_to_user(rio_cmd.buffer, buffer,
-						 rio_cmd.length)) {
-					free_page((unsigned long) buffer);
-					retval = -EFAULT;
-					goto err_out;
-				}
-				retries = 0;
-			}
-
-			/* rio_cmd.buffer contains a raw stream of single byte
-			   data which has been returned from rio.  Data is
-			   interpreted at application level.  For data that
-			   will be cast to data types longer than 1 byte, data
-			   will be little_endian and will potentially need to
-			   be swapped at the app level */
-
-		}
-		free_page((unsigned long) buffer);
-		break;
-
-	case RIO_SEND_COMMAND:
-		data = (void __user *) arg;
-		if (data == NULL)
-			break;
-		if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
-			retval = -EFAULT;
-			goto err_out;
-		}
-		if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
-			retval = -EINVAL;
-			goto err_out;
-		}
-		buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
-		if (buffer == NULL) {
-			retval = -ENOMEM;
-			goto err_out;
-		}
-		if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
-			free_page((unsigned long)buffer);
-			retval = -EFAULT;
-			goto err_out;
-		}
-
-		requesttype = rio_cmd.requesttype | USB_DIR_OUT |
-		    USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-		dev_dbg(&rio->rio_dev->dev,
-			"sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
-			requesttype, rio_cmd.request, rio_cmd.value,
-			rio_cmd.index, rio_cmd.length);
-		/* Send rio control message */
-		retries = 3;
-		while (retries) {
-			result = usb_control_msg(rio->rio_dev,
-						 usb_sndctrlpipe(rio-> rio_dev, 0),
-						 rio_cmd.request,
-						 requesttype,
-						 rio_cmd.value,
-						 rio_cmd.index, buffer,
-						 rio_cmd.length,
-						 jiffies_to_msecs(rio_cmd.timeout));
-			if (result == -ETIMEDOUT)
-				retries--;
-			else if (result < 0) {
-				dev_err(&rio->rio_dev->dev,
-					"Error executing ioctrl. code = %d\n",
-					result);
-				retries = 0;
-			} else {
-				dev_dbg(&rio->rio_dev->dev,
-					"Executed ioctl. Result = %d\n", result);
-				retries = 0;
-
-			}
-
-		}
-		free_page((unsigned long) buffer);
-		break;
-
-	default:
-		retval = -ENOTTY;
-		break;
-	}
-
-
-err_out:
-	mutex_unlock(&(rio->lock));
-	return retval;
-}
-
-static ssize_t
-write_rio(struct file *file, const char __user *buffer,
-	  size_t count, loff_t * ppos)
-{
-	DEFINE_WAIT(wait);
-	struct rio_usb_data *rio = &rio_instance;
-
-	unsigned long copy_size;
-	unsigned long bytes_written = 0;
-	unsigned int partial;
-
-	int result = 0;
-	int maxretry;
-	int errn = 0;
-	int intr;
-
-	intr = mutex_lock_interruptible(&(rio->lock));
-	if (intr)
-		return -EINTR;
-        /* Sanity check to make sure rio is connected, powered, etc */
-        if (rio->present == 0 || rio->rio_dev == NULL) {
-		mutex_unlock(&(rio->lock));
-		return -ENODEV;
-	}
-
-
-
-	do {
-		unsigned long thistime;
-		char *obuf = rio->obuf;
-
-		thistime = copy_size =
-		    (count >= OBUF_SIZE) ? OBUF_SIZE : count;
-		if (copy_from_user(rio->obuf, buffer, copy_size)) {
-			errn = -EFAULT;
-			goto error;
-		}
-		maxretry = 5;
-		while (thistime) {
-			if (!rio->rio_dev) {
-				errn = -ENODEV;
-				goto error;
-			}
-			if (signal_pending(current)) {
-				mutex_unlock(&(rio->lock));
-				return bytes_written ? bytes_written : -EINTR;
-			}
-
-			result = usb_bulk_msg(rio->rio_dev,
-					 usb_sndbulkpipe(rio->rio_dev, 2),
-					 obuf, thistime, &partial, 5000);
-
-			dev_dbg(&rio->rio_dev->dev,
-				"write stats: result:%d thistime:%lu partial:%u\n",
-				result, thistime, partial);
-
-			if (result == -ETIMEDOUT) {	/* NAK - so hold for a while */
-				if (!maxretry--) {
-					errn = -ETIME;
-					goto error;
-				}
-				prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
-				schedule_timeout(NAK_TIMEOUT);
-				finish_wait(&rio->wait_q, &wait);
-				continue;
-			} else if (!result && partial) {
-				obuf += partial;
-				thistime -= partial;
-			} else
-				break;
-		}
-		if (result) {
-			dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n",
-				result);
-			errn = -EIO;
-			goto error;
-		}
-		bytes_written += copy_size;
-		count -= copy_size;
-		buffer += copy_size;
-	} while (count > 0);
-
-	mutex_unlock(&(rio->lock));
-
-	return bytes_written ? bytes_written : -EIO;
-
-error:
-	mutex_unlock(&(rio->lock));
-	return errn;
-}
-
-static ssize_t
-read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
-{
-	DEFINE_WAIT(wait);
-	struct rio_usb_data *rio = &rio_instance;
-	ssize_t read_count;
-	unsigned int partial;
-	int this_read;
-	int result;
-	int maxretry = 10;
-	char *ibuf;
-	int intr;
-
-	intr = mutex_lock_interruptible(&(rio->lock));
-	if (intr)
-		return -EINTR;
-	/* Sanity check to make sure rio is connected, powered, etc */
-        if (rio->present == 0 || rio->rio_dev == NULL) {
-		mutex_unlock(&(rio->lock));
-		return -ENODEV;
-	}
-
-	ibuf = rio->ibuf;
-
-	read_count = 0;
-
-
-	while (count > 0) {
-		if (signal_pending(current)) {
-			mutex_unlock(&(rio->lock));
-			return read_count ? read_count : -EINTR;
-		}
-		if (!rio->rio_dev) {
-			mutex_unlock(&(rio->lock));
-			return -ENODEV;
-		}
-		this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
-
-		result = usb_bulk_msg(rio->rio_dev,
-				      usb_rcvbulkpipe(rio->rio_dev, 1),
-				      ibuf, this_read, &partial,
-				      8000);
-
-		dev_dbg(&rio->rio_dev->dev,
-			"read stats: result:%d this_read:%u partial:%u\n",
-			result, this_read, partial);
-
-		if (partial) {
-			count = this_read = partial;
-		} else if (result == -ETIMEDOUT || result == 15) {	/* FIXME: 15 ??? */
-			if (!maxretry--) {
-				mutex_unlock(&(rio->lock));
-				dev_err(&rio->rio_dev->dev,
-					"read_rio: maxretry timeout\n");
-				return -ETIME;
-			}
-			prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
-			schedule_timeout(NAK_TIMEOUT);
-			finish_wait(&rio->wait_q, &wait);
-			continue;
-		} else if (result != -EREMOTEIO) {
-			mutex_unlock(&(rio->lock));
-			dev_err(&rio->rio_dev->dev,
-				"Read Whoops - result:%d partial:%u this_read:%u\n",
-				result, partial, this_read);
-			return -EIO;
-		} else {
-			mutex_unlock(&(rio->lock));
-			return (0);
-		}
-
-		if (this_read) {
-			if (copy_to_user(buffer, ibuf, this_read)) {
-				mutex_unlock(&(rio->lock));
-				return -EFAULT;
-			}
-			count -= this_read;
-			read_count += this_read;
-			buffer += this_read;
-		}
-	}
-	mutex_unlock(&(rio->lock));
-	return read_count;
-}
-
-static const struct file_operations usb_rio_fops = {
-	.owner =	THIS_MODULE,
-	.read =		read_rio,
-	.write =	write_rio,
-	.unlocked_ioctl = ioctl_rio,
-	.open =		open_rio,
-	.release =	close_rio,
-	.llseek =	noop_llseek,
-};
-
-static struct usb_class_driver usb_rio_class = {
-	.name =		"rio500%d",
-	.fops =		&usb_rio_fops,
-	.minor_base =	RIO_MINOR,
-};
-
-static int probe_rio(struct usb_interface *intf,
-		     const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct rio_usb_data *rio = &rio_instance;
-	int retval = 0;
-
-	mutex_lock(&rio500_mutex);
-	if (rio->present) {
-		dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
-		retval = -EBUSY;
-		goto bail_out;
-	} else {
-		dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
-	}
-
-	retval = usb_register_dev(intf, &usb_rio_class);
-	if (retval) {
-		dev_err(&dev->dev,
-			"Not able to get a minor for this device.\n");
-		retval = -ENOMEM;
-		goto bail_out;
-	}
-
-	rio->rio_dev = dev;
-
-	if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) {
-		dev_err(&dev->dev,
-			"probe_rio: Not enough memory for the output buffer\n");
-		usb_deregister_dev(intf, &usb_rio_class);
-		retval = -ENOMEM;
-		goto bail_out;
-	}
-	dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
-
-	if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
-		dev_err(&dev->dev,
-			"probe_rio: Not enough memory for the input buffer\n");
-		usb_deregister_dev(intf, &usb_rio_class);
-		kfree(rio->obuf);
-		retval = -ENOMEM;
-		goto bail_out;
-	}
-	dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
-
-	mutex_init(&(rio->lock));
-
-	usb_set_intfdata (intf, rio);
-	rio->present = 1;
-bail_out:
-	mutex_unlock(&rio500_mutex);
-
-	return retval;
-}
-
-static void disconnect_rio(struct usb_interface *intf)
-{
-	struct rio_usb_data *rio = usb_get_intfdata (intf);
-
-	usb_set_intfdata (intf, NULL);
-	mutex_lock(&rio500_mutex);
-	if (rio) {
-		usb_deregister_dev(intf, &usb_rio_class);
-
-		mutex_lock(&(rio->lock));
-		if (rio->isopen) {
-			rio->isopen = 0;
-			/* better let it finish - the release will do whats needed */
-			rio->rio_dev = NULL;
-			mutex_unlock(&(rio->lock));
-			mutex_unlock(&rio500_mutex);
-			return;
-		}
-		kfree(rio->ibuf);
-		kfree(rio->obuf);
-
-		dev_info(&intf->dev, "USB Rio disconnected.\n");
-
-		rio->present = 0;
-		mutex_unlock(&(rio->lock));
-	}
-	mutex_unlock(&rio500_mutex);
-}
-
-static const struct usb_device_id rio_table[] = {
-	{ USB_DEVICE(0x0841, 1) }, 		/* Rio 500 */
-	{ }					/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, rio_table);
-
-static struct usb_driver rio_driver = {
-	.name =		"rio500",
-	.probe =	probe_rio,
-	.disconnect =	disconnect_rio,
-	.id_table =	rio_table,
-};
-
-module_usb_driver(rio_driver);
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
-
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/rio500_usb.h linux-libre-4.19.80-gnu/drivers/usb/misc/rio500_usb.h
--- linux-libre-4.19.79-gnu/drivers/usb/misc/rio500_usb.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/rio500_usb.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*  ----------------------------------------------------------------------
-    Copyright (C) 2000  Cesar Miquel  (miquel@df.uba.ar)
-    ---------------------------------------------------------------------- */
-
-#define RIO_SEND_COMMAND			0x1
-#define RIO_RECV_COMMAND			0x2
-
-#define RIO_DIR_OUT               	        0x0
-#define RIO_DIR_IN				0x1
-
-struct RioCommand {
-	short length;
-	int request;
-	int requesttype;
-	int value;
-	int index;
-	void __user *buffer;
-	int timeout;
-};
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/usblcd.c linux-libre-4.19.80-gnu/drivers/usb/misc/usblcd.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/usblcd.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/usblcd.c	2019-10-17 16:45:44.000000000 -0400
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
+#include <linux/rwsem.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 
@@ -57,6 +58,8 @@ struct usb_lcd {
 							   using up all RAM */
 	struct usb_anchor	submitted;		/* URBs to wait for
 							   before suspend */
+	struct rw_semaphore	io_rwsem;
+	unsigned long		disconnected:1;
 };
 #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
 
@@ -142,6 +145,13 @@ static ssize_t lcd_read(struct file *fil
 
 	dev = file->private_data;
 
+	down_read(&dev->io_rwsem);
+
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto out_up_io;
+	}
+
 	/* do a blocking bulk read to get data from the device */
 	retval = usb_bulk_msg(dev->udev,
 			      usb_rcvbulkpipe(dev->udev,
@@ -158,6 +168,9 @@ static ssize_t lcd_read(struct file *fil
 			retval = bytes_read;
 	}
 
+out_up_io:
+	up_read(&dev->io_rwsem);
+
 	return retval;
 }
 
@@ -237,11 +250,18 @@ static ssize_t lcd_write(struct file *fi
 	if (r < 0)
 		return -EINTR;
 
+	down_read(&dev->io_rwsem);
+
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto err_up_io;
+	}
+
 	/* create a urb, and a buffer for it, and copy the data to the urb */
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb) {
 		retval = -ENOMEM;
-		goto err_no_buf;
+		goto err_up_io;
 	}
 
 	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL,
@@ -278,6 +298,7 @@ static ssize_t lcd_write(struct file *fi
 	   the USB core will eventually free it entirely */
 	usb_free_urb(urb);
 
+	up_read(&dev->io_rwsem);
 exit:
 	return count;
 error_unanchor:
@@ -285,7 +306,8 @@ error_unanchor:
 error:
 	usb_free_coherent(dev->udev, count, buf, urb->transfer_dma);
 	usb_free_urb(urb);
-err_no_buf:
+err_up_io:
+	up_read(&dev->io_rwsem);
 	up(&dev->limit_sem);
 	return retval;
 }
@@ -325,6 +347,7 @@ static int lcd_probe(struct usb_interfac
 
 	kref_init(&dev->kref);
 	sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES);
+	init_rwsem(&dev->io_rwsem);
 	init_usb_anchor(&dev->submitted);
 
 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
@@ -422,6 +445,12 @@ static void lcd_disconnect(struct usb_in
 	/* give back our minor */
 	usb_deregister_dev(interface, &lcd_class);
 
+	down_write(&dev->io_rwsem);
+	dev->disconnected = 1;
+	up_write(&dev->io_rwsem);
+
+	usb_kill_anchored_urbs(&dev->submitted);
+
 	/* decrement our usage count */
 	kref_put(&dev->kref, lcd_delete);
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/misc/yurex.c linux-libre-4.19.80-gnu/drivers/usb/misc/yurex.c
--- linux-libre-4.19.79-gnu/drivers/usb/misc/yurex.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/misc/yurex.c	2019-10-17 16:45:44.000000000 -0400
@@ -60,6 +60,7 @@ struct usb_yurex {
 
 	struct kref		kref;
 	struct mutex		io_mutex;
+	unsigned long		disconnected:1;
 	struct fasync_struct	*async_queue;
 	wait_queue_head_t	waitq;
 
@@ -107,6 +108,7 @@ static void yurex_delete(struct kref *kr
 				dev->int_buffer, dev->urb->transfer_dma);
 		usb_free_urb(dev->urb);
 	}
+	usb_put_intf(dev->interface);
 	usb_put_dev(dev->udev);
 	kfree(dev);
 }
@@ -132,6 +134,7 @@ static void yurex_interrupt(struct urb *
 	switch (status) {
 	case 0: /*success*/
 		break;
+	/* The device is terminated or messed up, give up */
 	case -EOVERFLOW:
 		dev_err(&dev->interface->dev,
 			"%s - overflow with length %d, actual length is %d\n",
@@ -140,12 +143,13 @@ static void yurex_interrupt(struct urb *
 	case -ENOENT:
 	case -ESHUTDOWN:
 	case -EILSEQ:
-		/* The device is terminated, clean up */
+	case -EPROTO:
+	case -ETIME:
 		return;
 	default:
 		dev_err(&dev->interface->dev,
 			"%s - unknown status received: %d\n", __func__, status);
-		goto exit;
+		return;
 	}
 
 	/* handle received message */
@@ -177,7 +181,6 @@ static void yurex_interrupt(struct urb *
 		break;
 	}
 
-exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval) {
 		dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n",
@@ -204,7 +207,7 @@ static int yurex_probe(struct usb_interf
 	init_waitqueue_head(&dev->waitq);
 
 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
-	dev->interface = interface;
+	dev->interface = usb_get_intf(interface);
 
 	/* set up the endpoint information */
 	iface_desc = interface->cur_altsetting;
@@ -315,8 +318,9 @@ static void yurex_disconnect(struct usb_
 
 	/* prevent more I/O from starting */
 	usb_poison_urb(dev->urb);
+	usb_poison_urb(dev->cntl_urb);
 	mutex_lock(&dev->io_mutex);
-	dev->interface = NULL;
+	dev->disconnected = 1;
 	mutex_unlock(&dev->io_mutex);
 
 	/* wakeup waiters */
@@ -404,7 +408,7 @@ static ssize_t yurex_read(struct file *f
 	dev = file->private_data;
 
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {		/* already disconnected */
+	if (dev->disconnected) {		/* already disconnected */
 		mutex_unlock(&dev->io_mutex);
 		return -ENODEV;
 	}
@@ -439,7 +443,7 @@ static ssize_t yurex_write(struct file *
 		goto error;
 
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {		/* already disconnected */
+	if (dev->disconnected) {		/* already disconnected */
 		mutex_unlock(&dev->io_mutex);
 		retval = -ENODEV;
 		goto error;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/common.h linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/common.h
--- linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/common.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/common.h	2019-10-17 16:45:44.000000000 -0400
@@ -207,6 +207,7 @@ struct usbhs_priv;
 /* DCPCTR */
 #define BSTS		(1 << 15)	/* Buffer Status */
 #define SUREQ		(1 << 14)	/* Sending SETUP Token */
+#define INBUFM		(1 << 14)	/* (PIPEnCTR) Transfer Buffer Monitor */
 #define CSSTS		(1 << 12)	/* CSSTS Status */
 #define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
 #define SQCLR		(1 << 8)	/* Toggle Bit Clear */
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/fifo.c linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/fifo.c
--- linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/fifo.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/fifo.c	2019-10-17 16:45:44.000000000 -0400
@@ -89,7 +89,7 @@ static void __usbhsf_pkt_del(struct usbh
 	list_del_init(&pkt->node);
 }
 
-static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
 {
 	return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node);
 }
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/fifo.h linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/fifo.h
--- linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/fifo.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/fifo.h	2019-10-17 16:45:44.000000000 -0400
@@ -97,5 +97,6 @@ void usbhs_pkt_push(struct usbhs_pipe *p
 		    void *buf, int len, int zero, int sequence);
 struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
 void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
 
 #endif /* RENESAS_USB_FIFO_H */
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/mod_gadget.c linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/mod_gadget.c
--- linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/mod_gadget.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/mod_gadget.c	2019-10-17 16:45:44.000000000 -0400
@@ -721,8 +721,7 @@ static int __usbhsg_ep_set_halt_wedge(st
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
 	unsigned long flags;
-
-	usbhsg_pipe_disable(uep);
+	int ret = 0;
 
 	dev_dbg(dev, "set halt %d (pipe %d)\n",
 		halt, usbhs_pipe_number(pipe));
@@ -730,6 +729,18 @@ static int __usbhsg_ep_set_halt_wedge(st
 	/********************  spin lock ********************/
 	usbhs_lock(priv, flags);
 
+	/*
+	 * According to usb_ep_set_halt()'s description, this function should
+	 * return -EAGAIN if the IN endpoint has any queue or data. Note
+	 * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+	 * IN endpoint in the gadget mode.
+	 */
+	if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+	    usbhs_pipe_contains_transmittable_data(pipe))) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
 	if (halt)
 		usbhs_pipe_stall(pipe);
 	else
@@ -740,10 +751,11 @@ static int __usbhsg_ep_set_halt_wedge(st
 	else
 		usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
 
+out:
 	usbhs_unlock(priv, flags);
 	/********************  spin unlock ******************/
 
-	return 0;
+	return ret;
 }
 
 static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/pipe.c linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/pipe.c
--- linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/pipe.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/pipe.c	2019-10-17 16:45:44.000000000 -0400
@@ -277,6 +277,21 @@ int usbhs_pipe_is_accessible(struct usbh
 	return -EBUSY;
 }
 
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+	u16 val;
+
+	/* Do not support for DCP pipe */
+	if (usbhs_pipe_is_dcp(pipe))
+		return false;
+
+	val = usbhsp_pipectrl_get(pipe);
+	if (val & INBUFM)
+		return true;
+
+	return false;
+}
+
 /*
  *		PID ctrl
  */
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/pipe.h linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/pipe.h
--- linux-libre-4.19.79-gnu/drivers/usb/renesas_usbhs/pipe.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/renesas_usbhs/pipe.h	2019-10-17 16:45:44.000000000 -0400
@@ -83,6 +83,7 @@ void usbhs_pipe_clear(struct usbhs_pipe
 void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
 				       int needs_bfre, int bfre_enable);
 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
 void usbhs_pipe_enable(struct usbhs_pipe *pipe);
 void usbhs_pipe_disable(struct usbhs_pipe *pipe);
 void usbhs_pipe_stall(struct usbhs_pipe *pipe);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/serial/ftdi_sio.c linux-libre-4.19.80-gnu/drivers/usb/serial/ftdi_sio.c
--- linux-libre-4.19.79-gnu/drivers/usb/serial/ftdi_sio.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/serial/ftdi_sio.c	2019-10-17 16:45:44.000000000 -0400
@@ -1020,6 +1020,9 @@ static const struct usb_device_id id_tab
 	/* EZPrototypes devices */
 	{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
 	{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) },
+	/* Sienna devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
+	{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
 	{ }					/* Terminating entry */
 };
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/serial/ftdi_sio_ids.h linux-libre-4.19.80-gnu/drivers/usb/serial/ftdi_sio_ids.h
--- linux-libre-4.19.79-gnu/drivers/usb/serial/ftdi_sio_ids.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/serial/ftdi_sio_ids.h	2019-10-17 16:45:44.000000000 -0400
@@ -39,6 +39,9 @@
 
 #define FTDI_LUMEL_PD12_PID	0x6002
 
+/* Sienna Serial Interface by Secyourit GmbH */
+#define FTDI_SIENNA_PID		0x8348
+
 /* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
 #define CYBER_CORTEX_AV_PID	0x8698
 
@@ -689,6 +692,12 @@
 #define BANDB_ZZ_PROG1_USB_PID	0xBA02
 
 /*
+ * Echelon USB Serial Interface
+ */
+#define ECHELON_VID		0x0920
+#define ECHELON_U20_PID		0x7500
+
+/*
  * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
  */
 #define INTREPID_VID		0x093C
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/serial/keyspan.c linux-libre-4.19.80-gnu/drivers/usb/serial/keyspan.c
--- linux-libre-4.19.79-gnu/drivers/usb/serial/keyspan.c	2019-10-12 10:06:49.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/serial/keyspan.c	2019-10-17 21:53:47.000000000 -0400
@@ -1741,8 +1741,8 @@ static struct urb *keyspan_setup_urb(str
 
 	ep_desc = find_ep(serial, endpoint);
 	if (!ep_desc) {
-		/* leak the urb, something's wrong and the callers don't care */
-		return urb;
+		usb_free_urb(urb);
+		return NULL;
 	}
 	if (usb_endpoint_xfer_int(ep_desc)) {
 		ep_type_name = "INT";
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/serial/option.c linux-libre-4.19.80-gnu/drivers/usb/serial/option.c
--- linux-libre-4.19.79-gnu/drivers/usb/serial/option.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/serial/option.c	2019-10-17 16:45:44.000000000 -0400
@@ -419,6 +419,7 @@ static void option_instat_callback(struc
 #define CINTERION_PRODUCT_PH8_AUDIO		0x0083
 #define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
 #define CINTERION_PRODUCT_AHXX_AUDIO		0x0085
+#define CINTERION_PRODUCT_CLS8			0x00b0
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -1154,6 +1155,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
 	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1050, 0xff),	/* Telit FN980 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1051, 0xff),	/* Telit FN980 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1052, 0xff),	/* Telit FN980 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff),	/* Telit FN980 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
@@ -1847,6 +1856,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff),
+	  .driver_info = RSVD(0) | RSVD(4) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/serial/usb-serial.c linux-libre-4.19.80-gnu/drivers/usb/serial/usb-serial.c
--- linux-libre-4.19.79-gnu/drivers/usb/serial/usb-serial.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/serial/usb-serial.c	2019-10-17 16:45:44.000000000 -0400
@@ -311,10 +311,7 @@ static void serial_cleanup(struct tty_st
 	serial = port->serial;
 	owner = serial->type->driver.owner;
 
-	mutex_lock(&serial->disc_mutex);
-	if (!serial->disconnected)
-		usb_autopm_put_interface(serial->interface);
-	mutex_unlock(&serial->disc_mutex);
+	usb_autopm_put_interface(serial->interface);
 
 	usb_serial_put(serial);
 	module_put(owner);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/drivers/usb/usb-skeleton.c linux-libre-4.19.80-gnu/drivers/usb/usb-skeleton.c
--- linux-libre-4.19.79-gnu/drivers/usb/usb-skeleton.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/drivers/usb/usb-skeleton.c	2019-10-17 16:45:44.000000000 -0400
@@ -59,6 +59,7 @@ struct usb_skel {
 	spinlock_t		err_lock;		/* lock for errors */
 	struct kref		kref;
 	struct mutex		io_mutex;		/* synchronize I/O with disconnect */
+	unsigned long		disconnected:1;
 	wait_queue_head_t	bulk_in_wait;		/* to wait for an ongoing read */
 };
 #define to_skel_dev(d) container_of(d, struct usb_skel, kref)
@@ -71,6 +72,7 @@ static void skel_delete(struct kref *kre
 	struct usb_skel *dev = to_skel_dev(kref);
 
 	usb_free_urb(dev->bulk_in_urb);
+	usb_put_intf(dev->interface);
 	usb_put_dev(dev->udev);
 	kfree(dev->bulk_in_buffer);
 	kfree(dev);
@@ -122,10 +124,7 @@ static int skel_release(struct inode *in
 		return -ENODEV;
 
 	/* allow the device to be autosuspended */
-	mutex_lock(&dev->io_mutex);
-	if (dev->interface)
-		usb_autopm_put_interface(dev->interface);
-	mutex_unlock(&dev->io_mutex);
+	usb_autopm_put_interface(dev->interface);
 
 	/* decrement the count on our device */
 	kref_put(&dev->kref, skel_delete);
@@ -238,7 +237,7 @@ static ssize_t skel_read(struct file *fi
 	if (rv < 0)
 		return rv;
 
-	if (!dev->interface) {		/* disconnect() was called */
+	if (dev->disconnected) {		/* disconnect() was called */
 		rv = -ENODEV;
 		goto exit;
 	}
@@ -420,7 +419,7 @@ static ssize_t skel_write(struct file *f
 
 	/* this lock makes sure we don't submit URBs to gone devices */
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {		/* disconnect() was called */
+	if (dev->disconnected) {		/* disconnect() was called */
 		mutex_unlock(&dev->io_mutex);
 		retval = -ENODEV;
 		goto error;
@@ -505,7 +504,7 @@ static int skel_probe(struct usb_interfa
 	init_waitqueue_head(&dev->bulk_in_wait);
 
 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
-	dev->interface = interface;
+	dev->interface = usb_get_intf(interface);
 
 	/* set up the endpoint information */
 	/* use only the first bulk-in and bulk-out endpoints */
@@ -571,7 +570,7 @@ static void skel_disconnect(struct usb_i
 
 	/* prevent more I/O from starting */
 	mutex_lock(&dev->io_mutex);
-	dev->interface = NULL;
+	dev->disconnected = 1;
 	mutex_unlock(&dev->io_mutex);
 
 	usb_kill_anchored_urbs(&dev->submitted);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/btrfs/ref-verify.c linux-libre-4.19.80-gnu/fs/btrfs/ref-verify.c
--- linux-libre-4.19.79-gnu/fs/btrfs/ref-verify.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/btrfs/ref-verify.c	2019-10-17 16:45:44.000000000 -0400
@@ -511,7 +511,7 @@ static int process_leaf(struct btrfs_roo
 	struct btrfs_extent_data_ref *dref;
 	struct btrfs_shared_data_ref *sref;
 	u32 count;
-	int i = 0, tree_block_level = 0, ret;
+	int i = 0, tree_block_level = 0, ret = 0;
 	struct btrfs_key key;
 	int nritems = btrfs_header_nritems(leaf);
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/btrfs/tree-log.c linux-libre-4.19.80-gnu/fs/btrfs/tree-log.c
--- linux-libre-4.19.79-gnu/fs/btrfs/tree-log.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/btrfs/tree-log.c	2019-10-17 16:45:44.000000000 -0400
@@ -2860,7 +2860,8 @@ out:
  * in the tree of log roots
  */
 static int update_log_root(struct btrfs_trans_handle *trans,
-			   struct btrfs_root *log)
+			   struct btrfs_root *log,
+			   struct btrfs_root_item *root_item)
 {
 	struct btrfs_fs_info *fs_info = log->fs_info;
 	int ret;
@@ -2868,10 +2869,10 @@ static int update_log_root(struct btrfs_
 	if (log->log_transid == 1) {
 		/* insert root item on the first sync */
 		ret = btrfs_insert_root(trans, fs_info->log_root_tree,
-				&log->root_key, &log->root_item);
+				&log->root_key, root_item);
 	} else {
 		ret = btrfs_update_root(trans, fs_info->log_root_tree,
-				&log->root_key, &log->root_item);
+				&log->root_key, root_item);
 	}
 	return ret;
 }
@@ -2969,6 +2970,7 @@ int btrfs_sync_log(struct btrfs_trans_ha
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct btrfs_root *log = root->log_root;
 	struct btrfs_root *log_root_tree = fs_info->log_root_tree;
+	struct btrfs_root_item new_root_item;
 	int log_transid = 0;
 	struct btrfs_log_ctx root_log_ctx;
 	struct blk_plug plug;
@@ -3032,18 +3034,26 @@ int btrfs_sync_log(struct btrfs_trans_ha
 		goto out;
 	}
 
+	/*
+	 * We _must_ update under the root->log_mutex in order to make sure we
+	 * have a consistent view of the log root we are trying to commit at
+	 * this moment.
+	 *
+	 * We _must_ copy this into a local copy, because we are not holding the
+	 * log_root_tree->log_mutex yet.  This is important because when we
+	 * commit the log_root_tree we must have a consistent view of the
+	 * log_root_tree when we update the super block to point at the
+	 * log_root_tree bytenr.  If we update the log_root_tree here we'll race
+	 * with the commit and possibly point at the new block which we may not
+	 * have written out.
+	 */
 	btrfs_set_root_node(&log->root_item, log->node);
+	memcpy(&new_root_item, &log->root_item, sizeof(new_root_item));
 
 	root->log_transid++;
 	log->log_transid = root->log_transid;
 	root->log_start_pid = 0;
 	/*
-	 * Update or create log root item under the root's log_mutex to prevent
-	 * races with concurrent log syncs that can lead to failure to update
-	 * log root item because it was not created yet.
-	 */
-	ret = update_log_root(trans, log);
-	/*
 	 * IO has been started, blocks of the log tree have WRITTEN flag set
 	 * in their headers. new modifications of the log will be written to
 	 * new positions. so it's safe to allow log writers to go in.
@@ -3063,6 +3073,14 @@ int btrfs_sync_log(struct btrfs_trans_ha
 	mutex_unlock(&log_root_tree->log_mutex);
 
 	mutex_lock(&log_root_tree->log_mutex);
+
+	/*
+	 * Now we are safe to update the log_root_tree because we're under the
+	 * log_mutex, and we're a current writer so we're holding the commit
+	 * open until we drop the log_mutex.
+	 */
+	ret = update_log_root(trans, log, &new_root_item);
+
 	if (atomic_dec_and_test(&log_root_tree->log_writers)) {
 		/* atomic_dec_and_test implies a barrier */
 		cond_wake_up_nomb(&log_root_tree->log_writer_wait);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/cifs/dir.c linux-libre-4.19.80-gnu/fs/cifs/dir.c
--- linux-libre-4.19.79-gnu/fs/cifs/dir.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/cifs/dir.c	2019-10-17 16:45:44.000000000 -0400
@@ -840,10 +840,16 @@ cifs_lookup(struct inode *parent_dir_ino
 static int
 cifs_d_revalidate(struct dentry *direntry, unsigned int flags)
 {
+	struct inode *inode;
+
 	if (flags & LOOKUP_RCU)
 		return -ECHILD;
 
 	if (d_really_is_positive(direntry)) {
+		inode = d_inode(direntry);
+		if ((flags & LOOKUP_REVAL) && !CIFS_CACHE_READ(CIFS_I(inode)))
+			CIFS_I(inode)->time = 0; /* force reval */
+
 		if (cifs_revalidate_dentry(direntry))
 			return 0;
 		else {
@@ -854,7 +860,7 @@ cifs_d_revalidate(struct dentry *direntr
 			 * attributes will have been updated by
 			 * cifs_revalidate_dentry().
 			 */
-			if (IS_AUTOMOUNT(d_inode(direntry)) &&
+			if (IS_AUTOMOUNT(inode) &&
 			   !(direntry->d_flags & DCACHE_NEED_AUTOMOUNT)) {
 				spin_lock(&direntry->d_lock);
 				direntry->d_flags |= DCACHE_NEED_AUTOMOUNT;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/cifs/file.c linux-libre-4.19.80-gnu/fs/cifs/file.c
--- linux-libre-4.19.79-gnu/fs/cifs/file.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/cifs/file.c	2019-10-17 16:45:44.000000000 -0400
@@ -252,6 +252,12 @@ cifs_nt_open(char *full_path, struct ino
 		rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
 					 xid, fid);
 
+	if (rc) {
+		server->ops->close(xid, tcon, fid);
+		if (rc == -ESTALE)
+			rc = -EOPENSTALE;
+	}
+
 out:
 	kfree(buf);
 	return rc;
@@ -1835,13 +1841,12 @@ struct cifsFileInfo *find_readable_file(
 {
 	struct cifsFileInfo *open_file = NULL;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(cifs_inode->vfs_inode.i_sb);
-	struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);
 
 	/* only filter by fsuid on multiuser mounts */
 	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER))
 		fsuid_only = false;
 
-	spin_lock(&tcon->open_file_lock);
+	spin_lock(&cifs_inode->open_file_lock);
 	/* we could simply get the first_list_entry since write-only entries
 	   are always at the end of the list but since the first entry might
 	   have a close pending, we go through the whole list */
@@ -1853,7 +1858,7 @@ struct cifsFileInfo *find_readable_file(
 				/* found a good file */
 				/* lock it so it will not be closed on us */
 				cifsFileInfo_get(open_file);
-				spin_unlock(&tcon->open_file_lock);
+				spin_unlock(&cifs_inode->open_file_lock);
 				return open_file;
 			} /* else might as well continue, and look for
 			     another, or simply have the caller reopen it
@@ -1861,7 +1866,7 @@ struct cifsFileInfo *find_readable_file(
 		} else /* write only file */
 			break; /* write only files are last so must be done */
 	}
-	spin_unlock(&tcon->open_file_lock);
+	spin_unlock(&cifs_inode->open_file_lock);
 	return NULL;
 }
 
@@ -1870,7 +1875,6 @@ struct cifsFileInfo *find_writable_file(
 {
 	struct cifsFileInfo *open_file, *inv_file = NULL;
 	struct cifs_sb_info *cifs_sb;
-	struct cifs_tcon *tcon;
 	bool any_available = false;
 	int rc;
 	unsigned int refind = 0;
@@ -1886,16 +1890,15 @@ struct cifsFileInfo *find_writable_file(
 	}
 
 	cifs_sb = CIFS_SB(cifs_inode->vfs_inode.i_sb);
-	tcon = cifs_sb_master_tcon(cifs_sb);
 
 	/* only filter by fsuid on multiuser mounts */
 	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER))
 		fsuid_only = false;
 
-	spin_lock(&tcon->open_file_lock);
+	spin_lock(&cifs_inode->open_file_lock);
 refind_writable:
 	if (refind > MAX_REOPEN_ATT) {
-		spin_unlock(&tcon->open_file_lock);
+		spin_unlock(&cifs_inode->open_file_lock);
 		return NULL;
 	}
 	list_for_each_entry(open_file, &cifs_inode->openFileList, flist) {
@@ -1907,7 +1910,7 @@ refind_writable:
 			if (!open_file->invalidHandle) {
 				/* found a good writable file */
 				cifsFileInfo_get(open_file);
-				spin_unlock(&tcon->open_file_lock);
+				spin_unlock(&cifs_inode->open_file_lock);
 				return open_file;
 			} else {
 				if (!inv_file)
@@ -1926,7 +1929,7 @@ refind_writable:
 		cifsFileInfo_get(inv_file);
 	}
 
-	spin_unlock(&tcon->open_file_lock);
+	spin_unlock(&cifs_inode->open_file_lock);
 
 	if (inv_file) {
 		rc = cifs_reopen_file(inv_file, false);
@@ -1940,7 +1943,7 @@ refind_writable:
 			cifsFileInfo_put(inv_file);
 			++refind;
 			inv_file = NULL;
-			spin_lock(&tcon->open_file_lock);
+			spin_lock(&cifs_inode->open_file_lock);
 			goto refind_writable;
 		}
 	}
@@ -4001,17 +4004,15 @@ static int cifs_readpage(struct file *fi
 static int is_inode_writable(struct cifsInodeInfo *cifs_inode)
 {
 	struct cifsFileInfo *open_file;
-	struct cifs_tcon *tcon =
-		cifs_sb_master_tcon(CIFS_SB(cifs_inode->vfs_inode.i_sb));
 
-	spin_lock(&tcon->open_file_lock);
+	spin_lock(&cifs_inode->open_file_lock);
 	list_for_each_entry(open_file, &cifs_inode->openFileList, flist) {
 		if (OPEN_FMODE(open_file->f_flags) & FMODE_WRITE) {
-			spin_unlock(&tcon->open_file_lock);
+			spin_unlock(&cifs_inode->open_file_lock);
 			return 1;
 		}
 	}
-	spin_unlock(&tcon->open_file_lock);
+	spin_unlock(&cifs_inode->open_file_lock);
 	return 0;
 }
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/cifs/inode.c linux-libre-4.19.80-gnu/fs/cifs/inode.c
--- linux-libre-4.19.79-gnu/fs/cifs/inode.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/cifs/inode.c	2019-10-17 16:45:44.000000000 -0400
@@ -410,6 +410,7 @@ int cifs_get_inode_info_unix(struct inod
 		/* if uniqueid is different, return error */
 		if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
 		    CIFS_I(*pinode)->uniqueid != fattr.cf_uniqueid)) {
+			CIFS_I(*pinode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgiiu_exit;
 		}
@@ -417,6 +418,7 @@ int cifs_get_inode_info_unix(struct inod
 		/* if filetype is different, return error */
 		if (unlikely(((*pinode)->i_mode & S_IFMT) !=
 		    (fattr.cf_mode & S_IFMT))) {
+			CIFS_I(*pinode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgiiu_exit;
 		}
@@ -926,6 +928,7 @@ cifs_get_inode_info(struct inode **inode
 		/* if uniqueid is different, return error */
 		if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
 		    CIFS_I(*inode)->uniqueid != fattr.cf_uniqueid)) {
+			CIFS_I(*inode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgii_exit;
 		}
@@ -933,6 +936,7 @@ cifs_get_inode_info(struct inode **inode
 		/* if filetype is different, return error */
 		if (unlikely(((*inode)->i_mode & S_IFMT) !=
 		    (fattr.cf_mode & S_IFMT))) {
+			CIFS_I(*inode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgii_exit;
 		}
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/f2fs/super.c linux-libre-4.19.80-gnu/fs/f2fs/super.c
--- linux-libre-4.19.79-gnu/fs/f2fs/super.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/f2fs/super.c	2019-10-17 16:45:44.000000000 -0400
@@ -2196,11 +2196,11 @@ static int sanity_check_raw_super(struct
 	struct super_block *sb = sbi->sb;
 	unsigned int blocksize;
 
-	if (F2FS_SUPER_MAGIC != le32_to_cpu(raw_super->magic)) {
+	if (le32_to_cpu(raw_super->magic) != F2FS_SUPER_MAGIC) {
 		f2fs_msg(sb, KERN_INFO,
 			"Magic Mismatch, valid(0x%x) - read(0x%x)",
 			F2FS_SUPER_MAGIC, le32_to_cpu(raw_super->magic));
-		return 1;
+		return -EINVAL;
 	}
 
 	/* Currently, support only 4KB page cache size */
@@ -2208,7 +2208,7 @@ static int sanity_check_raw_super(struct
 		f2fs_msg(sb, KERN_INFO,
 			"Invalid page_cache_size (%lu), supports only 4KB\n",
 			PAGE_SIZE);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	/* Currently, support only 4KB block size */
@@ -2217,7 +2217,7 @@ static int sanity_check_raw_super(struct
 		f2fs_msg(sb, KERN_INFO,
 			"Invalid blocksize (%u), supports only 4KB\n",
 			blocksize);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	/* check log blocks per segment */
@@ -2225,7 +2225,7 @@ static int sanity_check_raw_super(struct
 		f2fs_msg(sb, KERN_INFO,
 			"Invalid log blocks per segment (%u)\n",
 			le32_to_cpu(raw_super->log_blocks_per_seg));
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	/* Currently, support 512/1024/2048/4096 bytes sector size */
@@ -2235,7 +2235,7 @@ static int sanity_check_raw_super(struct
 				F2FS_MIN_LOG_SECTOR_SIZE) {
 		f2fs_msg(sb, KERN_INFO, "Invalid log sectorsize (%u)",
 			le32_to_cpu(raw_super->log_sectorsize));
-		return 1;
+		return -EFSCORRUPTED;
 	}
 	if (le32_to_cpu(raw_super->log_sectors_per_block) +
 		le32_to_cpu(raw_super->log_sectorsize) !=
@@ -2244,7 +2244,7 @@ static int sanity_check_raw_super(struct
 			"Invalid log sectors per block(%u) log sectorsize(%u)",
 			le32_to_cpu(raw_super->log_sectors_per_block),
 			le32_to_cpu(raw_super->log_sectorsize));
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	segment_count = le32_to_cpu(raw_super->segment_count);
@@ -2260,7 +2260,7 @@ static int sanity_check_raw_super(struct
 		f2fs_msg(sb, KERN_INFO,
 			"Invalid segment count (%u)",
 			segment_count);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	if (total_sections > segment_count ||
@@ -2269,28 +2269,28 @@ static int sanity_check_raw_super(struct
 		f2fs_msg(sb, KERN_INFO,
 			"Invalid segment/section count (%u, %u x %u)",
 			segment_count, total_sections, segs_per_sec);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	if ((segment_count / segs_per_sec) < total_sections) {
 		f2fs_msg(sb, KERN_INFO,
 			"Small segment_count (%u < %u * %u)",
 			segment_count, segs_per_sec, total_sections);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	if (segment_count > (le64_to_cpu(raw_super->block_count) >> 9)) {
 		f2fs_msg(sb, KERN_INFO,
 			"Wrong segment_count / block_count (%u > %llu)",
 			segment_count, le64_to_cpu(raw_super->block_count));
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	if (secs_per_zone > total_sections || !secs_per_zone) {
 		f2fs_msg(sb, KERN_INFO,
 			"Wrong secs_per_zone / total_sections (%u, %u)",
 			secs_per_zone, total_sections);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 	if (le32_to_cpu(raw_super->extension_count) > F2FS_MAX_EXTENSION ||
 			raw_super->hot_ext_count > F2FS_MAX_EXTENSION ||
@@ -2301,7 +2301,7 @@ static int sanity_check_raw_super(struct
 			le32_to_cpu(raw_super->extension_count),
 			raw_super->hot_ext_count,
 			F2FS_MAX_EXTENSION);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	if (le32_to_cpu(raw_super->cp_payload) >
@@ -2310,7 +2310,7 @@ static int sanity_check_raw_super(struct
 			"Insane cp_payload (%u > %u)",
 			le32_to_cpu(raw_super->cp_payload),
 			blocks_per_seg - F2FS_CP_PACKS);
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	/* check reserved ino info */
@@ -2322,12 +2322,12 @@ static int sanity_check_raw_super(struct
 			le32_to_cpu(raw_super->node_ino),
 			le32_to_cpu(raw_super->meta_ino),
 			le32_to_cpu(raw_super->root_ino));
-		return 1;
+		return -EFSCORRUPTED;
 	}
 
 	/* check CP/SIT/NAT/SSA/MAIN_AREA area boundary */
 	if (sanity_check_area_boundary(sbi, bh))
-		return 1;
+		return -EFSCORRUPTED;
 
 	return 0;
 }
@@ -2612,11 +2612,11 @@ static int read_raw_super_block(struct f
 		}
 
 		/* sanity checking of raw super */
-		if (sanity_check_raw_super(sbi, bh)) {
+		err = sanity_check_raw_super(sbi, bh);
+		if (err) {
 			f2fs_msg(sb, KERN_ERR,
 				"Can't find valid F2FS filesystem in %dth superblock",
 				block + 1);
-			err = -EFSCORRUPTED;
 			brelse(bh);
 			continue;
 		}
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/libfs.c linux-libre-4.19.80-gnu/fs/libfs.c
--- linux-libre-4.19.79-gnu/fs/libfs.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/libfs.c	2019-10-17 16:45:44.000000000 -0400
@@ -86,58 +86,47 @@ int dcache_dir_close(struct inode *inode
 EXPORT_SYMBOL(dcache_dir_close);
 
 /* parent is locked at least shared */
-static struct dentry *next_positive(struct dentry *parent,
-				    struct list_head *from,
-				    int count)
+/*
+ * Returns an element of siblings' list.
+ * We are looking for <count>th positive after <p>; if
+ * found, dentry is grabbed and passed to caller via *<res>.
+ * If no such element exists, the anchor of list is returned
+ * and *<res> is set to NULL.
+ */
+static struct list_head *scan_positives(struct dentry *cursor,
+					struct list_head *p,
+					loff_t count,
+					struct dentry **res)
 {
-	unsigned *seq = &parent->d_inode->i_dir_seq, n;
-	struct dentry *res;
-	struct list_head *p;
-	bool skipped;
-	int i;
+	struct dentry *dentry = cursor->d_parent, *found = NULL;
 
-retry:
-	i = count;
-	skipped = false;
-	n = smp_load_acquire(seq) & ~1;
-	res = NULL;
-	rcu_read_lock();
-	for (p = from->next; p != &parent->d_subdirs; p = p->next) {
+	spin_lock(&dentry->d_lock);
+	while ((p = p->next) != &dentry->d_subdirs) {
 		struct dentry *d = list_entry(p, struct dentry, d_child);
-		if (!simple_positive(d)) {
-			skipped = true;
-		} else if (!--i) {
-			res = d;
-			break;
+		// we must at least skip cursors, to avoid livelocks
+		if (d->d_flags & DCACHE_DENTRY_CURSOR)
+			continue;
+		if (simple_positive(d) && !--count) {
+			spin_lock_nested(&d->d_lock, DENTRY_D_LOCK_NESTED);
+			if (simple_positive(d))
+				found = dget_dlock(d);
+			spin_unlock(&d->d_lock);
+			if (likely(found))
+				break;
+			count = 1;
+		}
+		if (need_resched()) {
+			list_move(&cursor->d_child, p);
+			p = &cursor->d_child;
+			spin_unlock(&dentry->d_lock);
+			cond_resched();
+			spin_lock(&dentry->d_lock);
 		}
 	}
-	rcu_read_unlock();
-	if (skipped) {
-		smp_rmb();
-		if (unlikely(*seq != n))
-			goto retry;
-	}
-	return res;
-}
-
-static void move_cursor(struct dentry *cursor, struct list_head *after)
-{
-	struct dentry *parent = cursor->d_parent;
-	unsigned n, *seq = &parent->d_inode->i_dir_seq;
-	spin_lock(&parent->d_lock);
-	for (;;) {
-		n = *seq;
-		if (!(n & 1) && cmpxchg(seq, n, n + 1) == n)
-			break;
-		cpu_relax();
-	}
-	__list_del(cursor->d_child.prev, cursor->d_child.next);
-	if (after)
-		list_add(&cursor->d_child, after);
-	else
-		list_add_tail(&cursor->d_child, &parent->d_subdirs);
-	smp_store_release(seq, n + 2);
-	spin_unlock(&parent->d_lock);
+	spin_unlock(&dentry->d_lock);
+	dput(*res);
+	*res = found;
+	return p;
 }
 
 loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence)
@@ -153,17 +142,28 @@ loff_t dcache_dir_lseek(struct file *fil
 			return -EINVAL;
 	}
 	if (offset != file->f_pos) {
+		struct dentry *cursor = file->private_data;
+		struct dentry *to = NULL;
+		struct list_head *p;
+
 		file->f_pos = offset;
-		if (file->f_pos >= 2) {
-			struct dentry *cursor = file->private_data;
-			struct dentry *to;
-			loff_t n = file->f_pos - 2;
+		inode_lock_shared(dentry->d_inode);
 
-			inode_lock_shared(dentry->d_inode);
-			to = next_positive(dentry, &dentry->d_subdirs, n);
-			move_cursor(cursor, to ? &to->d_child : NULL);
-			inode_unlock_shared(dentry->d_inode);
+		if (file->f_pos > 2) {
+			p = scan_positives(cursor, &dentry->d_subdirs,
+					   file->f_pos - 2, &to);
+			spin_lock(&dentry->d_lock);
+			list_move(&cursor->d_child, p);
+			spin_unlock(&dentry->d_lock);
+		} else {
+			spin_lock(&dentry->d_lock);
+			list_del_init(&cursor->d_child);
+			spin_unlock(&dentry->d_lock);
 		}
+
+		dput(to);
+
+		inode_unlock_shared(dentry->d_inode);
 	}
 	return offset;
 }
@@ -185,25 +185,29 @@ int dcache_readdir(struct file *file, st
 {
 	struct dentry *dentry = file->f_path.dentry;
 	struct dentry *cursor = file->private_data;
-	struct list_head *p = &cursor->d_child;
-	struct dentry *next;
-	bool moved = false;
+	struct list_head *anchor = &dentry->d_subdirs;
+	struct dentry *next = NULL;
+	struct list_head *p;
 
 	if (!dir_emit_dots(file, ctx))
 		return 0;
 
 	if (ctx->pos == 2)
-		p = &dentry->d_subdirs;
-	while ((next = next_positive(dentry, p, 1)) != NULL) {
+		p = anchor;
+	else
+		p = &cursor->d_child;
+
+	while ((p = scan_positives(cursor, p, 1, &next)) != anchor) {
 		if (!dir_emit(ctx, next->d_name.name, next->d_name.len,
 			      d_inode(next)->i_ino, dt_type(d_inode(next))))
 			break;
-		moved = true;
-		p = &next->d_child;
 		ctx->pos++;
 	}
-	if (moved)
-		move_cursor(cursor, p);
+	spin_lock(&dentry->d_lock);
+	list_move_tail(&cursor->d_child, p);
+	spin_unlock(&dentry->d_lock);
+	dput(next);
+
 	return 0;
 }
 EXPORT_SYMBOL(dcache_readdir);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/fs/nfs/direct.c linux-libre-4.19.80-gnu/fs/nfs/direct.c
--- linux-libre-4.19.79-gnu/fs/nfs/direct.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/fs/nfs/direct.c	2019-10-17 16:45:44.000000000 -0400
@@ -122,32 +122,49 @@ static inline int put_dreq(struct nfs_di
 }
 
 static void
-nfs_direct_good_bytes(struct nfs_direct_req *dreq, struct nfs_pgio_header *hdr)
+nfs_direct_handle_truncated(struct nfs_direct_req *dreq,
+			    const struct nfs_pgio_header *hdr,
+			    ssize_t dreq_len)
 {
-	int i;
-	ssize_t count;
+	struct nfs_direct_mirror *mirror = &dreq->mirrors[hdr->pgio_mirror_idx];
 
-	WARN_ON_ONCE(dreq->count >= dreq->max_count);
+	if (!(test_bit(NFS_IOHDR_ERROR, &hdr->flags) ||
+	      test_bit(NFS_IOHDR_EOF, &hdr->flags)))
+		return;
+	if (dreq->max_count >= dreq_len) {
+		dreq->max_count = dreq_len;
+		if (dreq->count > dreq_len)
+			dreq->count = dreq_len;
 
-	if (dreq->mirror_count == 1) {
-		dreq->mirrors[hdr->pgio_mirror_idx].count += hdr->good_bytes;
-		dreq->count += hdr->good_bytes;
-	} else {
-		/* mirrored writes */
-		count = dreq->mirrors[hdr->pgio_mirror_idx].count;
-		if (count + dreq->io_start < hdr->io_start + hdr->good_bytes) {
-			count = hdr->io_start + hdr->good_bytes - dreq->io_start;
-			dreq->mirrors[hdr->pgio_mirror_idx].count = count;
-		}
-		/* update the dreq->count by finding the minimum agreed count from all
-		 * mirrors */
-		count = dreq->mirrors[0].count;
+		if (test_bit(NFS_IOHDR_ERROR, &hdr->flags))
+			dreq->error = hdr->error;
+		else /* Clear outstanding error if this is EOF */
+			dreq->error = 0;
+	}
+	if (mirror->count > dreq_len)
+		mirror->count = dreq_len;
+}
 
-		for (i = 1; i < dreq->mirror_count; i++)
-			count = min(count, dreq->mirrors[i].count);
+static void
+nfs_direct_count_bytes(struct nfs_direct_req *dreq,
+		       const struct nfs_pgio_header *hdr)
+{
+	struct nfs_direct_mirror *mirror = &dreq->mirrors[hdr->pgio_mirror_idx];
+	loff_t hdr_end = hdr->io_start + hdr->good_bytes;
+	ssize_t dreq_len = 0;
 
-		dreq->count = count;
-	}
+	if (hdr_end > dreq->io_start)
+		dreq_len = hdr_end - dreq->io_start;
+
+	nfs_direct_handle_truncated(dreq, hdr, dreq_len);
+
+	if (dreq_len > dreq->max_count)
+		dreq_len = dreq->max_count;
+
+	if (mirror->count < dreq_len)
+		mirror->count = dreq_len;
+	if (dreq->count < dreq_len)
+		dreq->count = dreq_len;
 }
 
 /*
@@ -401,20 +418,12 @@ static void nfs_direct_read_completion(s
 	struct nfs_direct_req *dreq = hdr->dreq;
 
 	spin_lock(&dreq->lock);
-	if (test_bit(NFS_IOHDR_ERROR, &hdr->flags))
-		dreq->error = hdr->error;
-
 	if (test_bit(NFS_IOHDR_REDO, &hdr->flags)) {
 		spin_unlock(&dreq->lock);
 		goto out_put;
 	}
 
-	if (hdr->good_bytes != 0)
-		nfs_direct_good_bytes(dreq, hdr);
-
-	if (test_bit(NFS_IOHDR_EOF, &hdr->flags))
-		dreq->error = 0;
-
+	nfs_direct_count_bytes(dreq, hdr);
 	spin_unlock(&dreq->lock);
 
 	while (!list_empty(&hdr->pages)) {
@@ -651,6 +660,9 @@ static void nfs_direct_write_reschedule(
 	nfs_direct_write_scan_commit_list(dreq->inode, &reqs, &cinfo);
 
 	dreq->count = 0;
+	dreq->max_count = 0;
+	list_for_each_entry(req, &reqs, wb_list)
+		dreq->max_count += req->wb_bytes;
 	dreq->verf.committed = NFS_INVALID_STABLE_HOW;
 	nfs_clear_pnfs_ds_commit_verifiers(&dreq->ds_cinfo);
 	for (i = 0; i < dreq->mirror_count; i++)
@@ -783,17 +795,13 @@ static void nfs_direct_write_completion(
 	nfs_init_cinfo_from_dreq(&cinfo, dreq);
 
 	spin_lock(&dreq->lock);
-
-	if (test_bit(NFS_IOHDR_ERROR, &hdr->flags))
-		dreq->error = hdr->error;
-
 	if (test_bit(NFS_IOHDR_REDO, &hdr->flags)) {
 		spin_unlock(&dreq->lock);
 		goto out_put;
 	}
 
+	nfs_direct_count_bytes(dreq, hdr);
 	if (hdr->good_bytes != 0) {
-		nfs_direct_good_bytes(dreq, hdr);
 		if (nfs_write_need_commit(hdr)) {
 			if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES)
 				request_commit = true;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/include/acpi/actbl2.h linux-libre-4.19.80-gnu/include/acpi/actbl2.h
--- linux-libre-4.19.79-gnu/include/acpi/actbl2.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/include/acpi/actbl2.h	2019-10-17 16:45:44.000000000 -0400
@@ -1472,8 +1472,11 @@ struct acpi_pptt_processor {
 
 /* Flags */
 
-#define ACPI_PPTT_PHYSICAL_PACKAGE          (1)	/* Physical package */
-#define ACPI_PPTT_ACPI_PROCESSOR_ID_VALID   (2)	/* ACPI Processor ID valid */
+#define ACPI_PPTT_PHYSICAL_PACKAGE          (1)
+#define ACPI_PPTT_ACPI_PROCESSOR_ID_VALID   (1<<1)
+#define ACPI_PPTT_ACPI_PROCESSOR_IS_THREAD  (1<<2)	/* ACPI 6.3 */
+#define ACPI_PPTT_ACPI_LEAF_NODE            (1<<3)	/* ACPI 6.3 */
+#define ACPI_PPTT_ACPI_IDENTICAL            (1<<4)	/* ACPI 6.3 */
 
 /* 1: Cache Type Structure */
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/include/linux/acpi.h linux-libre-4.19.80-gnu/include/linux/acpi.h
--- linux-libre-4.19.79-gnu/include/linux/acpi.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/include/linux/acpi.h	2019-10-17 16:45:44.000000000 -0400
@@ -1291,10 +1291,15 @@ static inline int lpit_read_residency_co
 #endif
 
 #ifdef CONFIG_ACPI_PPTT
+int acpi_pptt_cpu_is_thread(unsigned int cpu);
 int find_acpi_cpu_topology(unsigned int cpu, int level);
 int find_acpi_cpu_topology_package(unsigned int cpu);
 int find_acpi_cpu_cache_topology(unsigned int cpu, int level);
 #else
+static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+	return -EINVAL;
+}
 static inline int find_acpi_cpu_topology(unsigned int cpu, int level)
 {
 	return -EINVAL;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/include/linux/hwmon.h linux-libre-4.19.80-gnu/include/linux/hwmon.h
--- linux-libre-4.19.79-gnu/include/linux/hwmon.h	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/include/linux/hwmon.h	2019-10-17 16:45:44.000000000 -0400
@@ -225,7 +225,7 @@ enum hwmon_power_attributes {
 #define HWMON_P_LABEL			BIT(hwmon_power_label)
 #define HWMON_P_ALARM			BIT(hwmon_power_alarm)
 #define HWMON_P_CAP_ALARM		BIT(hwmon_power_cap_alarm)
-#define HWMON_P_MIN_ALARM		BIT(hwmon_power_max_alarm)
+#define HWMON_P_MIN_ALARM		BIT(hwmon_power_min_alarm)
 #define HWMON_P_MAX_ALARM		BIT(hwmon_power_max_alarm)
 #define HWMON_P_LCRIT_ALARM		BIT(hwmon_power_lcrit_alarm)
 #define HWMON_P_CRIT_ALARM		BIT(hwmon_power_crit_alarm)
diff -druNp --no-dereference linux-libre-4.19.79-gnu/kernel/events/hw_breakpoint.c linux-libre-4.19.80-gnu/kernel/events/hw_breakpoint.c
--- linux-libre-4.19.79-gnu/kernel/events/hw_breakpoint.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/kernel/events/hw_breakpoint.c	2019-10-17 16:45:44.000000000 -0400
@@ -426,7 +426,7 @@ static int hw_breakpoint_parse(struct pe
 
 int register_perf_hw_breakpoint(struct perf_event *bp)
 {
-	struct arch_hw_breakpoint hw;
+	struct arch_hw_breakpoint hw = { };
 	int err;
 
 	err = reserve_bp_slot(bp);
@@ -474,7 +474,7 @@ int
 modify_user_hw_breakpoint_check(struct perf_event *bp, struct perf_event_attr *attr,
 			        bool check)
 {
-	struct arch_hw_breakpoint hw;
+	struct arch_hw_breakpoint hw = { };
 	int err;
 
 	err = hw_breakpoint_parse(bp, attr, &hw);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/kernel/fork.c linux-libre-4.19.80-gnu/kernel/fork.c
--- linux-libre-4.19.79-gnu/kernel/fork.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/kernel/fork.c	2019-10-17 16:45:44.000000000 -0400
@@ -2623,7 +2623,7 @@ int sysctl_max_threads(struct ctl_table
 	struct ctl_table t;
 	int ret;
 	int threads = max_threads;
-	int min = MIN_THREADS;
+	int min = 1;
 	int max = MAX_THREADS;
 
 	t = *table;
@@ -2635,7 +2635,7 @@ int sysctl_max_threads(struct ctl_table
 	if (ret || !write)
 		return ret;
 
-	set_max_threads(threads);
+	max_threads = threads;
 
 	return 0;
 }
diff -druNp --no-dereference linux-libre-4.19.79-gnu/kernel/panic.c linux-libre-4.19.80-gnu/kernel/panic.c
--- linux-libre-4.19.79-gnu/kernel/panic.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/kernel/panic.c	2019-10-17 16:45:44.000000000 -0400
@@ -149,6 +149,7 @@ void panic(const char *fmt, ...)
 	 * after setting panic_cpu) from invoking panic() again.
 	 */
 	local_irq_disable();
+	preempt_disable_notrace();
 
 	/*
 	 * It's possible to come here directly from a panic-assertion and
diff -druNp --no-dereference linux-libre-4.19.79-gnu/kernel/trace/ftrace.c linux-libre-4.19.80-gnu/kernel/trace/ftrace.c
--- linux-libre-4.19.79-gnu/kernel/trace/ftrace.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/kernel/trace/ftrace.c	2019-10-17 16:45:44.000000000 -0400
@@ -3557,21 +3557,22 @@ ftrace_regex_open(struct ftrace_ops *ops
 	struct ftrace_hash *hash;
 	struct list_head *mod_head;
 	struct trace_array *tr = ops->private;
-	int ret = 0;
+	int ret = -ENOMEM;
 
 	ftrace_ops_init(ops);
 
 	if (unlikely(ftrace_disabled))
 		return -ENODEV;
 
+	if (tr && trace_array_get(tr) < 0)
+		return -ENODEV;
+
 	iter = kzalloc(sizeof(*iter), GFP_KERNEL);
 	if (!iter)
-		return -ENOMEM;
+		goto out;
 
-	if (trace_parser_get_init(&iter->parser, FTRACE_BUFF_MAX)) {
-		kfree(iter);
-		return -ENOMEM;
-	}
+	if (trace_parser_get_init(&iter->parser, FTRACE_BUFF_MAX))
+		goto out;
 
 	iter->ops = ops;
 	iter->flags = flag;
@@ -3601,13 +3602,13 @@ ftrace_regex_open(struct ftrace_ops *ops
 
 		if (!iter->hash) {
 			trace_parser_put(&iter->parser);
-			kfree(iter);
-			ret = -ENOMEM;
 			goto out_unlock;
 		}
 	} else
 		iter->hash = hash;
 
+	ret = 0;
+
 	if (file->f_mode & FMODE_READ) {
 		iter->pg = ftrace_pages_start;
 
@@ -3619,7 +3620,6 @@ ftrace_regex_open(struct ftrace_ops *ops
 			/* Failed */
 			free_ftrace_hash(iter->hash);
 			trace_parser_put(&iter->parser);
-			kfree(iter);
 		}
 	} else
 		file->private_data = iter;
@@ -3627,6 +3627,13 @@ ftrace_regex_open(struct ftrace_ops *ops
  out_unlock:
 	mutex_unlock(&ops->func_hash->regex_lock);
 
+ out:
+	if (ret) {
+		kfree(iter);
+		if (tr)
+			trace_array_put(tr);
+	}
+
 	return ret;
 }
 
@@ -5024,6 +5031,8 @@ int ftrace_regex_release(struct inode *i
 
 	mutex_unlock(&iter->ops->func_hash->regex_lock);
 	free_ftrace_hash(iter->hash);
+	if (iter->tr)
+		trace_array_put(iter->tr);
 	kfree(iter);
 
 	return 0;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/kernel/trace/trace.c linux-libre-4.19.80-gnu/kernel/trace/trace.c
--- linux-libre-4.19.79-gnu/kernel/trace/trace.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/kernel/trace/trace.c	2019-10-17 16:45:44.000000000 -0400
@@ -4154,9 +4154,14 @@ static int show_traces_open(struct inode
 	if (tracing_disabled)
 		return -ENODEV;
 
+	if (trace_array_get(tr) < 0)
+		return -ENODEV;
+
 	ret = seq_open(file, &show_traces_seq_ops);
-	if (ret)
+	if (ret) {
+		trace_array_put(tr);
 		return ret;
+	}
 
 	m = file->private_data;
 	m->private = tr;
@@ -4164,6 +4169,14 @@ static int show_traces_open(struct inode
 	return 0;
 }
 
+static int show_traces_release(struct inode *inode, struct file *file)
+{
+	struct trace_array *tr = inode->i_private;
+
+	trace_array_put(tr);
+	return seq_release(inode, file);
+}
+
 static ssize_t
 tracing_write_stub(struct file *filp, const char __user *ubuf,
 		   size_t count, loff_t *ppos)
@@ -4194,8 +4207,8 @@ static const struct file_operations trac
 static const struct file_operations show_traces_fops = {
 	.open		= show_traces_open,
 	.read		= seq_read,
-	.release	= seq_release,
 	.llseek		= seq_lseek,
+	.release	= show_traces_release,
 };
 
 static ssize_t
diff -druNp --no-dereference linux-libre-4.19.79-gnu/kernel/trace/trace_hwlat.c linux-libre-4.19.80-gnu/kernel/trace/trace_hwlat.c
--- linux-libre-4.19.79-gnu/kernel/trace/trace_hwlat.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/kernel/trace/trace_hwlat.c	2019-10-17 16:45:44.000000000 -0400
@@ -150,7 +150,7 @@ void trace_hwlat_callback(bool enter)
 		if (enter)
 			nmi_ts_start = time_get();
 		else
-			nmi_total_ts = time_get() - nmi_ts_start;
+			nmi_total_ts += time_get() - nmi_ts_start;
 	}
 
 	if (enter)
@@ -256,6 +256,8 @@ static int get_sample(void)
 		/* Keep a running maximum ever recorded hardware latency */
 		if (sample > tr->max_latency)
 			tr->max_latency = sample;
+		if (outer_sample > tr->max_latency)
+			tr->max_latency = outer_sample;
 	}
 
 out:
diff -druNp --no-dereference linux-libre-4.19.79-gnu/MAINTAINERS linux-libre-4.19.80-gnu/MAINTAINERS
--- linux-libre-4.19.79-gnu/MAINTAINERS	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/MAINTAINERS	2019-10-17 16:45:44.000000000 -0400
@@ -15117,13 +15117,6 @@ W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c
 
-USB DIAMOND RIO500 DRIVER
-M:	Cesar Miquel <miquel@df.uba.ar>
-L:	rio500-users@lists.sourceforge.net
-W:	http://rio500.sourceforge.net
-S:	Maintained
-F:	drivers/usb/misc/rio500*
-
 USB EHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
diff -druNp --no-dereference linux-libre-4.19.79-gnu/Makefile linux-libre-4.19.80-gnu/Makefile
--- linux-libre-4.19.79-gnu/Makefile	2019-10-12 09:32:29.000000000 -0400
+++ linux-libre-4.19.80-gnu/Makefile	2019-10-17 21:21:31.000000000 -0400
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 79
+SUBLEVEL = 80
 EXTRAVERSION = -gnu
 NAME = "People's Front"
 
diff -druNp --no-dereference linux-libre-4.19.79-gnu/mm/vmpressure.c linux-libre-4.19.80-gnu/mm/vmpressure.c
--- linux-libre-4.19.79-gnu/mm/vmpressure.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/mm/vmpressure.c	2019-10-17 16:45:44.000000000 -0400
@@ -358,6 +358,9 @@ void vmpressure_prio(gfp_t gfp, struct m
  * "hierarchy" or "local").
  *
  * To be used as memcg event method.
+ *
+ * Return: 0 on success, -ENOMEM on memory failure or -EINVAL if @args could
+ * not be parsed.
  */
 int vmpressure_register_event(struct mem_cgroup *memcg,
 			      struct eventfd_ctx *eventfd, const char *args)
@@ -365,7 +368,7 @@ int vmpressure_register_event(struct mem
 	struct vmpressure *vmpr = memcg_to_vmpressure(memcg);
 	struct vmpressure_event *ev;
 	enum vmpressure_modes mode = VMPRESSURE_NO_PASSTHROUGH;
-	enum vmpressure_levels level = -1;
+	enum vmpressure_levels level;
 	char *spec, *spec_orig;
 	char *token;
 	int ret = 0;
@@ -378,20 +381,18 @@ int vmpressure_register_event(struct mem
 
 	/* Find required level */
 	token = strsep(&spec, ",");
-	level = match_string(vmpressure_str_levels, VMPRESSURE_NUM_LEVELS, token);
-	if (level < 0) {
-		ret = level;
+	ret = match_string(vmpressure_str_levels, VMPRESSURE_NUM_LEVELS, token);
+	if (ret < 0)
 		goto out;
-	}
+	level = ret;
 
 	/* Find optional mode */
 	token = strsep(&spec, ",");
 	if (token) {
-		mode = match_string(vmpressure_str_modes, VMPRESSURE_NUM_MODES, token);
-		if (mode < 0) {
-			ret = mode;
+		ret = match_string(vmpressure_str_modes, VMPRESSURE_NUM_MODES, token);
+		if (ret < 0)
 			goto out;
-		}
+		mode = ret;
 	}
 
 	ev = kzalloc(sizeof(*ev), GFP_KERNEL);
@@ -407,6 +408,7 @@ int vmpressure_register_event(struct mem
 	mutex_lock(&vmpr->events_lock);
 	list_add(&ev->node, &vmpr->events);
 	mutex_unlock(&vmpr->events_lock);
+	ret = 0;
 out:
 	kfree(spec_orig);
 	return ret;
diff -druNp --no-dereference linux-libre-4.19.79-gnu/tools/perf/util/jitdump.c linux-libre-4.19.80-gnu/tools/perf/util/jitdump.c
--- linux-libre-4.19.79-gnu/tools/perf/util/jitdump.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/tools/perf/util/jitdump.c	2019-10-17 16:45:44.000000000 -0400
@@ -394,7 +394,7 @@ static int jit_repipe_code_load(struct j
 	size_t size;
 	u16 idr_size;
 	const char *sym;
-	uint32_t count;
+	uint64_t count;
 	int ret, csize, usize;
 	pid_t pid, tid;
 	struct {
@@ -417,7 +417,7 @@ static int jit_repipe_code_load(struct j
 		return -1;
 
 	filename = event->mmap2.filename;
-	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%u.so",
+	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%" PRIu64 ".so",
 			jd->dir,
 			pid,
 			count);
@@ -530,7 +530,7 @@ static int jit_repipe_code_move(struct j
 		return -1;
 
 	filename = event->mmap2.filename;
-	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%"PRIu64,
+	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%" PRIu64 ".so",
 	         jd->dir,
 	         pid,
 		 jr->move.code_index);
diff -druNp --no-dereference linux-libre-4.19.79-gnu/tools/perf/util/llvm-utils.c linux-libre-4.19.80-gnu/tools/perf/util/llvm-utils.c
--- linux-libre-4.19.79-gnu/tools/perf/util/llvm-utils.c	2019-10-11 12:21:44.000000000 -0400
+++ linux-libre-4.19.80-gnu/tools/perf/util/llvm-utils.c	2019-10-17 16:45:44.000000000 -0400
@@ -230,14 +230,14 @@ static int detect_kbuild_dir(char **kbui
 	const char *prefix_dir = "";
 	const char *suffix_dir = "";
 
+	/* _UTSNAME_LENGTH is 65 */
+	char release[128];
+
 	char *autoconf_path;
 
 	int err;
 
 	if (!test_dir) {
-		/* _UTSNAME_LENGTH is 65 */
-		char release[128];
-
 		err = fetch_kernel_version(NULL, release,
 					   sizeof(release));
 		if (err)
