diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/arm/configs/badge4_defconfig linux-libre-4.9.197-gnu/arch/arm/configs/badge4_defconfig
--- linux-libre-4.9.196-gnu/arch/arm/configs/badge4_defconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/arm/configs/badge4_defconfig	2019-10-17 16:42:47.000000000 -0400
@@ -97,7 +97,6 @@ CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 CONFIG_MSDOS_FS=y
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/arm/configs/corgi_defconfig linux-libre-4.9.197-gnu/arch/arm/configs/corgi_defconfig
--- linux-libre-4.9.196-gnu/arch/arm/configs/corgi_defconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/arm/configs/corgi_defconfig	2019-10-17 16:42:47.000000000 -0400
@@ -207,7 +207,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/arm/configs/pxa_defconfig linux-libre-4.9.197-gnu/arch/arm/configs/pxa_defconfig
--- linux-libre-4.9.196-gnu/arch/arm/configs/pxa_defconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/arm/configs/pxa_defconfig	2019-10-17 16:42:47.000000000 -0400
@@ -591,7 +591,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/arm/configs/s3c2410_defconfig linux-libre-4.9.197-gnu/arch/arm/configs/s3c2410_defconfig
--- linux-libre-4.9.196-gnu/arch/arm/configs/s3c2410_defconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/arm/configs/s3c2410_defconfig	2019-10-17 16:42:47.000000000 -0400
@@ -354,7 +354,6 @@ CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
 CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/arm/configs/spitz_defconfig linux-libre-4.9.197-gnu/arch/arm/configs/spitz_defconfig
--- linux-libre-4.9.196-gnu/arch/arm/configs/spitz_defconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/arm/configs/spitz_defconfig	2019-10-17 16:42:47.000000000 -0400
@@ -202,7 +202,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/mips/configs/mtx1_defconfig linux-libre-4.9.197-gnu/arch/mips/configs/mtx1_defconfig
--- linux-libre-4.9.196-gnu/arch/mips/configs/mtx1_defconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/mips/configs/mtx1_defconfig	2019-10-17 16:42:47.000000000 -0400
@@ -637,7 +637,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/mips/configs/rm200_defconfig linux-libre-4.9.197-gnu/arch/mips/configs/rm200_defconfig
--- linux-libre-4.9.196-gnu/arch/mips/configs/rm200_defconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/mips/configs/rm200_defconfig	2019-10-17 16:42:47.000000000 -0400
@@ -350,7 +350,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/mips/loongson64/Platform linux-libre-4.9.197-gnu/arch/mips/loongson64/Platform
--- linux-libre-4.9.196-gnu/arch/mips/loongson64/Platform	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/mips/loongson64/Platform	2019-10-17 16:42:47.000000000 -0400
@@ -43,6 +43,10 @@ else
       $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
 endif
 
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-y += $(call cc-option,-mno-loongson-mmi)
+
 #
 # Loongson Machines' Support
 #
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/mips/vdso/Makefile linux-libre-4.9.197-gnu/arch/mips/vdso/Makefile
--- linux-libre-4.9.196-gnu/arch/mips/vdso/Makefile	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/mips/vdso/Makefile	2019-10-17 16:42:47.000000000 -0400
@@ -8,6 +8,7 @@ ccflags-vdso := \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
 	$(filter -m%-float,$(KBUILD_CFLAGS)) \
+	$(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \
 	-D__VDSO__
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/powerpc/platforms/powernv/opal.c linux-libre-4.9.197-gnu/arch/powerpc/platforms/powernv/opal.c
--- linux-libre-4.9.196-gnu/arch/powerpc/platforms/powernv/opal.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/powerpc/platforms/powernv/opal.c	2019-10-17 16:42:47.000000000 -0400
@@ -579,7 +579,10 @@ static ssize_t symbol_map_read(struct fi
 				       bin_attr->size);
 }
 
-static BIN_ATTR_RO(symbol_map, 0);
+static struct bin_attribute symbol_map_attr = {
+	.attr = {.name = "symbol_map", .mode = 0400},
+	.read = symbol_map_read
+};
 
 static void opal_export_symmap(void)
 {
@@ -596,10 +599,10 @@ static void opal_export_symmap(void)
 		return;
 
 	/* Setup attributes */
-	bin_attr_symbol_map.private = __va(be64_to_cpu(syms[0]));
-	bin_attr_symbol_map.size = be64_to_cpu(syms[1]);
+	symbol_map_attr.private = __va(be64_to_cpu(syms[0]));
+	symbol_map_attr.size = be64_to_cpu(syms[1]);
 
-	rc = sysfs_create_bin_file(opal_kobj, &bin_attr_symbol_map);
+	rc = sysfs_create_bin_file(opal_kobj, &symbol_map_attr);
 	if (rc)
 		pr_warn("Error %d creating OPAL symbols file\n", rc);
 }
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/s390/kernel/topology.c linux-libre-4.9.197-gnu/arch/s390/kernel/topology.c
--- linux-libre-4.9.196-gnu/arch/s390/kernel/topology.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/s390/kernel/topology.c	2019-10-17 16:42:47.000000000 -0400
@@ -256,7 +256,8 @@ int arch_update_cpu_topology(void)
 		topology_update_polarization_simple();
 	for_each_online_cpu(cpu) {
 		dev = get_cpu_device(cpu);
-		kobject_uevent(&dev->kobj, KOBJ_CHANGE);
+		if (dev)
+			kobject_uevent(&dev->kobj, KOBJ_CHANGE);
 	}
 	return rc;
 }
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/s390/kvm/kvm-s390.c linux-libre-4.9.197-gnu/arch/s390/kvm/kvm-s390.c
--- linux-libre-4.9.196-gnu/arch/s390/kvm/kvm-s390.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/s390/kvm/kvm-s390.c	2019-10-17 16:42:47.000000000 -0400
@@ -3033,7 +3033,7 @@ static long kvm_s390_guest_mem_op(struct
 	const u64 supported_flags = KVM_S390_MEMOP_F_INJECT_EXCEPTION
 				    | KVM_S390_MEMOP_F_CHECK_ONLY;
 
-	if (mop->flags & ~supported_flags)
+	if (mop->flags & ~supported_flags || mop->ar >= NUM_ACRS || !mop->size)
 		return -EINVAL;
 
 	if (mop->size > MEM_OP_MAX_SIZE)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/x86/include/asm/mwait.h linux-libre-4.9.197-gnu/arch/x86/include/asm/mwait.h
--- linux-libre-4.9.196-gnu/arch/x86/include/asm/mwait.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/x86/include/asm/mwait.h	2019-10-17 16:42:47.000000000 -0400
@@ -19,7 +19,7 @@
 #define MWAIT_ECX_INTERRUPT_BREAK	0x1
 #define MWAITX_ECX_TIMER_ENABLE		BIT(1)
 #define MWAITX_MAX_LOOPS		((u32)-1)
-#define MWAITX_DISABLE_CSTATES		0xf
+#define MWAITX_DISABLE_CSTATES		0xf0
 
 static inline void __monitor(const void *eax, unsigned long ecx,
 			     unsigned long edx)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/x86/kvm/vmx.c linux-libre-4.9.197-gnu/arch/x86/kvm/vmx.c
--- linux-libre-4.9.196-gnu/arch/x86/kvm/vmx.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/x86/kvm/vmx.c	2019-10-17 16:42:47.000000000 -0400
@@ -7668,7 +7668,7 @@ static int handle_vmread(struct kvm_vcpu
 		/* _system ok, as nested_vmx_check_permission verified cpl=0 */
 		if (kvm_write_guest_virt_system(vcpu, gva, &field_value,
 						(is_long_mode(vcpu) ? 8 : 4),
-						NULL))
+						&e))
 			kvm_inject_page_fault(vcpu, &e);
 	}
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/arch/x86/lib/delay.c linux-libre-4.9.197-gnu/arch/x86/lib/delay.c
--- linux-libre-4.9.196-gnu/arch/x86/lib/delay.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/arch/x86/lib/delay.c	2019-10-17 16:42:47.000000000 -0400
@@ -112,8 +112,8 @@ static void delay_mwaitx(unsigned long _
 		__monitorx(raw_cpu_ptr(&cpu_tss), 0, 0);
 
 		/*
-		 * AMD, like Intel, supports the EAX hint and EAX=0xf
-		 * means, do not enter any deep C-state and we use it
+		 * AMD, like Intel's MWAIT version, supports the EAX hint and
+		 * EAX=0xf0 means, do not enter any deep C-state and we use it
 		 * here in delay() to minimize wakeup latency.
 		 */
 		__mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/Documentation/usb/rio.txt linux-libre-4.9.197-gnu/Documentation/usb/rio.txt
--- linux-libre-4.9.196-gnu/Documentation/usb/rio.txt	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/Documentation/usb/rio.txt	1969-12-31 19:00:00.000000000 -0500
@@ -1,138 +0,0 @@
-Copyright (C) 1999, 2000 Bruce Tenison
-Portions Copyright (C) 1999, 2000 David Nelson
-Thanks to David Nelson for guidance and the usage of the scanner.txt
-and scanner.c files to model our driver and this informative file.
-
-Mar. 2, 2000
-
-CHANGES
-
-- Initial Revision
-
-
-OVERVIEW
-
-This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.  
-Before I explain how to use this to access the Rio500 please be warned:
-
-W A R N I N G:
---------------
-
-Please note that this software is still under development.  The authors
-are in no way responsible for any damage that may occur, no matter how
-inconsequential.
-
-It seems that the Rio has a problem when sending .mp3 with low batteries.
-I suggest when the batteries are low and you want to transfer stuff that you
-replace it with a fresh one. In my case, what happened is I lost two 16kb
-blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash 
-memory.
-
-In an extreme case, I left my Rio playing overnight and the batteries wore 
-down to nothing and appear to have corrupted the flash memory. My RIO 
-needed to be replaced as a result.  Diamond tech support is aware of the 
-problem.  Do NOT allow your batteries to wear down to nothing before 
-changing them.  It appears RIO 500 firmware does not handle low battery 
-power well at all. 
-
-On systems with OHCI controllers, the kernel OHCI code appears to have 
-power on problems with some chipsets.  If you are having problems 
-connecting to your RIO 500, try turning it on first and then plugging it 
-into the USB cable.  
-
-Contact information:
---------------------
-
-   The main page for the project is hosted at sourceforge.net in the following
-   URL: <http://rio500.sourceforge.net>. You can also go to the project's
-   sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
-   There is also a mailing list: rio500-users@lists.sourceforge.net
-
-Authors:
--------
-
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith 
-Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
-things work there. Bruce Tenison <btenison@dibbs.net> is adding support
-for .fon files and also does testing. The program will mostly sure be
-re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use 
-with some important information regarding the communication with the Rio.
-
-ADDITIONAL INFORMATION and Userspace tools
-
-http://rio500.sourceforge.net/
-
-
-REQUIREMENTS
-
-A host with a USB port.  Ideally, either a UHCI (Intel) or OHCI
-(Compaq and others) hardware port should work.
-
-A Linux development kernel (2.3.x) with USB support enabled or a
-backported version to linux-2.2.x.  See http://www.linux-usb.org for
-more information on accomplishing this.
-
-A Linux kernel with RIO 500 support enabled.
-
-'lspci' which is only needed to determine the type of USB hardware
-available in your machine.
-
-CONFIGURATION
-
-Using `lspci -v`, determine the type of USB hardware available.
-
-  If you see something like:
-
-    USB Controller: ......
-    Flags: .....
-    I/O ports at ....
-
-  Then you have a UHCI based controller.
-
-  If you see something like:
-
-     USB Controller: .....
-     Flags: ....
-     Memory at .....
-
-  Then you have a OHCI based controller.
-
-Using `make menuconfig` or your preferred method for configuring the
-kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
-hardware (determined from the steps above), 'USB Diamond Rio500 support', and
-'Preliminary USB device filesystem'.  Compile and install the modules
-(you may need to execute `depmod -a` to update the module
-dependencies).
-
-Add a device for the USB rio500:
-  `mknod /dev/usb/rio500 c 180 64`
-
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
-group and world permissions).  Both read and write permissions are
-required for proper operation.
-
-Load the appropriate modules (if compiled as modules):
-
-  OHCI:
-    modprobe usbcore
-    modprobe usb-ohci
-    modprobe rio500
-
-  UHCI:
-    modprobe usbcore
-    modprobe usb-uhci  (or uhci)
-    modprobe rio500
-
-That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
-be able to access the rio500.
-
-BUGS
-
-If you encounter any problems feel free to drop me an email.
-
-Bruce Tenison
-btenison@dibbs.net
-
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/crypto/caam/caamalg.c linux-libre-4.9.197-gnu/drivers/crypto/caam/caamalg.c
--- linux-libre-4.9.196-gnu/drivers/crypto/caam/caamalg.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/crypto/caam/caamalg.c	2019-10-17 16:42:47.000000000 -0400
@@ -75,7 +75,7 @@
 #define DESC_AEAD_BASE			(4 * CAAM_CMD_SZ)
 #define DESC_AEAD_ENC_LEN		(DESC_AEAD_BASE + 11 * CAAM_CMD_SZ)
 #define DESC_AEAD_DEC_LEN		(DESC_AEAD_BASE + 15 * CAAM_CMD_SZ)
-#define DESC_AEAD_GIVENC_LEN		(DESC_AEAD_ENC_LEN + 9 * CAAM_CMD_SZ)
+#define DESC_AEAD_GIVENC_LEN		(DESC_AEAD_ENC_LEN + 10 * CAAM_CMD_SZ)
 
 /* Note: Nonce is counted in enckeylen */
 #define DESC_AEAD_CTR_RFC3686_LEN	(4 * CAAM_CMD_SZ)
@@ -474,6 +474,7 @@ static int aead_set_sh_desc(struct crypt
 	u32 geniv, moveiv;
 	u32 ctx1_iv_off = 0;
 	u32 *desc;
+	u32 *wait_cmd;
 	const bool ctr_mode = ((ctx->class1_alg_type & OP_ALG_AAI_MASK) ==
 			       OP_ALG_AAI_CTR_MOD128);
 	const bool is_rfc3686 = alg->caam.rfc3686;
@@ -736,6 +737,14 @@ copy_iv:
 
 	/* Will read cryptlen */
 	append_math_add(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ);
+
+	/*
+	 * Wait for IV transfer (ofifo -> class2) to finish before starting
+	 * ciphertext transfer (ofifo -> external memory).
+	 */
+	wait_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL | JUMP_COND_NIFP);
+	set_jump_tgt_here(desc, wait_cmd);
+
 	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_BOTH | KEY_VLF |
 			     FIFOLD_TYPE_MSG1OUT2 | FIFOLD_TYPE_LASTBOTH);
 	append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | KEY_VLF);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/crypto/qat/qat_common/adf_common_drv.h linux-libre-4.9.197-gnu/drivers/crypto/qat/qat_common/adf_common_drv.h
--- linux-libre-4.9.196-gnu/drivers/crypto/qat/qat_common/adf_common_drv.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/crypto/qat/qat_common/adf_common_drv.h	2019-10-17 16:42:47.000000000 -0400
@@ -95,7 +95,7 @@ struct service_hndl {
 
 static inline int get_current_node(void)
 {
-	return topology_physical_package_id(smp_processor_id());
+	return topology_physical_package_id(raw_smp_processor_id());
 }
 
 int adf_service_register(struct service_hndl *service);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/firmware/efi/efi.c linux-libre-4.9.197-gnu/drivers/firmware/efi/efi.c
--- linux-libre-4.9.196-gnu/drivers/firmware/efi/efi.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/firmware/efi/efi.c	2019-10-17 16:42:47.000000000 -0400
@@ -243,6 +243,9 @@ static __init int efivar_ssdt_load(void)
 	void *data;
 	int ret;
 
+	if (!efivar_ssdt[0])
+		return 0;
+
 	ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries);
 
 	list_for_each_entry_safe(entry, aux, &entries, list) {
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c linux-libre-4.9.197-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
--- linux-libre-4.9.196-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c	2019-10-17 16:42:47.000000000 -0400
@@ -430,6 +430,9 @@ static int amdgpu_info_ioctl(struct drm_
 		if (sh_num == AMDGPU_INFO_MMR_SH_INDEX_MASK)
 			sh_num = 0xffffffff;
 
+		if (info->read_mmr_reg.count > 128)
+			return -EINVAL;
+
 		regs = kmalloc_array(info->read_mmr_reg.count, sizeof(*regs), GFP_KERNEL);
 		if (!regs)
 			return -ENOMEM;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/hwtracing/coresight/coresight-etm4x.c linux-libre-4.9.197-gnu/drivers/hwtracing/coresight/coresight-etm4x.c
--- linux-libre-4.9.196-gnu/drivers/hwtracing/coresight/coresight-etm4x.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/hwtracing/coresight/coresight-etm4x.c	2019-10-17 16:42:47.000000000 -0400
@@ -181,6 +181,12 @@ static void etm4_enable_hw(void *info)
 	if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 0))
 		dev_err(drvdata->dev,
 			"timeout while waiting for Idle Trace Status\n");
+	/*
+	 * As recommended by section 4.3.7 ("Synchronization when using the
+	 * memory-mapped interface") of ARM IHI 0064D
+	 */
+	dsb(sy);
+	isb();
 
 	CS_LOCK(drvdata->base);
 
@@ -323,8 +329,12 @@ static void etm4_disable_hw(void *info)
 	/* EN, bit[0] Trace unit enable bit */
 	control &= ~0x1;
 
-	/* make sure everything completes before disabling */
-	mb();
+	/*
+	 * Make sure everything completes before disabling, as recommended
+	 * by section 7.3.77 ("TRCVICTLR, ViewInst Main Control Register,
+	 * SSTATUS") of ARM IHI 0064D
+	 */
+	dsb(sy);
 	isb();
 	writel_relaxed(control, drvdata->base + TRCPRGCTLR);
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/iio/adc/ad799x.c linux-libre-4.9.197-gnu/drivers/iio/adc/ad799x.c
--- linux-libre-4.9.196-gnu/drivers/iio/adc/ad799x.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/iio/adc/ad799x.c	2019-10-17 16:42:47.000000000 -0400
@@ -817,10 +817,10 @@ static int ad799x_probe(struct i2c_clien
 
 	ret = ad799x_write_config(st, st->chip_config->default_config);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	ret = ad799x_read_config(st);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	st->config = ret;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/iio/light/opt3001.c linux-libre-4.9.197-gnu/drivers/iio/light/opt3001.c
--- linux-libre-4.9.196-gnu/drivers/iio/light/opt3001.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/iio/light/opt3001.c	2019-10-17 16:42:47.000000000 -0400
@@ -695,6 +695,7 @@ static irqreturn_t opt3001_irq(int irq,
 	struct iio_dev *iio = _iio;
 	struct opt3001 *opt = iio_priv(iio);
 	int ret;
+	bool wake_result_ready_queue = false;
 
 	if (!opt->ok_to_ignore_lock)
 		mutex_lock(&opt->lock);
@@ -729,13 +730,16 @@ static irqreturn_t opt3001_irq(int irq,
 		}
 		opt->result = ret;
 		opt->result_ready = true;
-		wake_up(&opt->result_ready_queue);
+		wake_result_ready_queue = true;
 	}
 
 out:
 	if (!opt->ok_to_ignore_lock)
 		mutex_unlock(&opt->lock);
 
+	if (wake_result_ready_queue)
+		wake_up(&opt->result_ready_queue);
+
 	return IRQ_HANDLED;
 }
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/media/usb/stkwebcam/stk-webcam.c linux-libre-4.9.197-gnu/drivers/media/usb/stkwebcam/stk-webcam.c
--- linux-libre-4.9.196-gnu/drivers/media/usb/stkwebcam/stk-webcam.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/media/usb/stkwebcam/stk-webcam.c	2019-10-17 16:42:47.000000000 -0400
@@ -647,8 +647,7 @@ static int v4l_stk_release(struct file *
 		dev->owner = NULL;
 	}
 
-	if (is_present(dev))
-		usb_autopm_put_interface(dev->interface);
+	usb_autopm_put_interface(dev->interface);
 	mutex_unlock(&dev->lock);
 	return v4l2_fh_release(fp);
 }
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/net/can/spi/mcp251x.c linux-libre-4.9.197-gnu/drivers/net/can/spi/mcp251x.c
--- linux-libre-4.9.196-gnu/drivers/net/can/spi/mcp251x.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/net/can/spi/mcp251x.c	2019-10-17 16:42:47.000000000 -0400
@@ -627,7 +627,7 @@ static int mcp251x_setup(struct net_devi
 static int mcp251x_hw_reset(struct spi_device *spi)
 {
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
-	u8 reg;
+	unsigned long timeout;
 	int ret;
 
 	/* Wait for oscillator startup timer after power up */
@@ -641,10 +641,19 @@ static int mcp251x_hw_reset(struct spi_d
 	/* Wait for oscillator startup timer after reset */
 	mdelay(MCP251X_OST_DELAY_MS);
 
-	reg = mcp251x_read_reg(spi, CANSTAT);
-	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
-		return -ENODEV;
+	/* Wait for reset to finish */
+	timeout = jiffies + HZ;
+	while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) !=
+	       CANCTRL_REQOP_CONF) {
+		usleep_range(MCP251X_OST_DELAY_MS * 1000,
+			     MCP251X_OST_DELAY_MS * 1000 * 2);
 
+		if (time_after(jiffies, timeout)) {
+			dev_err(&spi->dev,
+				"MCP251x didn't enter in conf mode after reset\n");
+			return -EBUSY;
+		}
+	}
 	return 0;
 }
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/net/ieee802154/atusb.c linux-libre-4.9.197-gnu/drivers/net/ieee802154/atusb.c
--- linux-libre-4.9.196-gnu/drivers/net/ieee802154/atusb.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/net/ieee802154/atusb.c	2019-10-17 16:42:47.000000000 -0400
@@ -838,10 +838,11 @@ static void atusb_disconnect(struct usb_
 
 	ieee802154_unregister_hw(atusb->hw);
 
+	usb_put_dev(atusb->usb_dev);
+
 	ieee802154_free_hw(atusb->hw);
 
 	usb_set_intfdata(interface, NULL);
-	usb_put_dev(atusb->usb_dev);
 
 	pr_debug("atusb_disconnect done\n");
 }
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/s390/cio/ccwgroup.c linux-libre-4.9.197-gnu/drivers/s390/cio/ccwgroup.c
--- linux-libre-4.9.196-gnu/drivers/s390/cio/ccwgroup.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/s390/cio/ccwgroup.c	2019-10-17 16:42:47.000000000 -0400
@@ -369,7 +369,7 @@ int ccwgroup_create_dev(struct device *p
 		goto error;
 	}
 	/* Check for trailing stuff. */
-	if (i == num_devices && strlen(buf) > 0) {
+	if (i == num_devices && buf && strlen(buf) > 0) {
 		rc = -EINVAL;
 		goto error;
 	}
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/s390/cio/css.c linux-libre-4.9.197-gnu/drivers/s390/cio/css.c
--- linux-libre-4.9.196-gnu/drivers/s390/cio/css.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/s390/cio/css.c	2019-10-17 16:42:47.000000000 -0400
@@ -1120,6 +1120,8 @@ device_initcall(cio_settle_init);
 
 int sch_is_pseudo_sch(struct subchannel *sch)
 {
+	if (!sch->dev.parent)
+		return 0;
 	return sch == to_css(sch->dev.parent)->pseudo_subchannel;
 }
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/staging/fbtft/fbtft-core.c linux-libre-4.9.197-gnu/drivers/staging/fbtft/fbtft-core.c
--- linux-libre-4.9.196-gnu/drivers/staging/fbtft/fbtft-core.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/staging/fbtft/fbtft-core.c	2019-10-17 16:42:47.000000000 -0400
@@ -247,7 +247,7 @@ static int fbtft_request_gpios_dt(struct
 static int fbtft_backlight_update_status(struct backlight_device *bd)
 {
 	struct fbtft_par *par = bl_get_data(bd);
-	bool polarity = !!(bd->props.state & BL_CORE_DRIVER1);
+	bool polarity = par->polarity;
 
 	fbtft_par_dbg(DEBUG_BACKLIGHT, par,
 		"%s: polarity=%d, power=%d, fb_blank=%d\n",
@@ -296,7 +296,7 @@ void fbtft_register_backlight(struct fbt
 	/* Assume backlight is off, get polarity from current state of pin */
 	bl_props.power = FB_BLANK_POWERDOWN;
 	if (!gpio_get_value(par->gpio.led[0]))
-		bl_props.state |= BL_CORE_DRIVER1;
+		par->polarity = true;
 
 	bd = backlight_device_register(dev_driver_string(par->info->device),
 				par->info->device, par, &fbtft_bl_ops, &bl_props);
@@ -814,7 +814,7 @@ struct fb_info *fbtft_framebuffer_alloc(
 	if (par->gamma.curves && gamma) {
 		if (fbtft_gamma_parse_str(par,
 			par->gamma.curves, gamma, strlen(gamma)))
-			goto alloc_fail;
+			goto release_framebuf;
 	}
 
 	/* Transmit buffer */
@@ -839,7 +839,7 @@ struct fb_info *fbtft_framebuffer_alloc(
 			txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL);
 		}
 		if (!txbuf)
-			goto alloc_fail;
+			goto release_framebuf;
 		par->txbuf.buf = txbuf;
 		par->txbuf.len = txbuflen;
 	}
@@ -875,6 +875,9 @@ struct fb_info *fbtft_framebuffer_alloc(
 
 	return info;
 
+release_framebuf:
+	framebuffer_release(info);
+
 alloc_fail:
 	vfree(vmem);
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/staging/fbtft/fbtft.h linux-libre-4.9.197-gnu/drivers/staging/fbtft/fbtft.h
--- linux-libre-4.9.196-gnu/drivers/staging/fbtft/fbtft.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/staging/fbtft/fbtft.h	2019-10-17 16:42:47.000000000 -0400
@@ -241,6 +241,7 @@ struct fbtft_par {
 	ktime_t update_time;
 	bool bgr;
 	void *extra;
+	bool polarity;
 };
 
 #define NUMARGS(...)  (sizeof((int[]){__VA_ARGS__})/sizeof(int))
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/staging/vt6655/device_main.c linux-libre-4.9.197-gnu/drivers/staging/vt6655/device_main.c
--- linux-libre-4.9.196-gnu/drivers/staging/vt6655/device_main.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/staging/vt6655/device_main.c	2019-10-17 16:42:47.000000000 -0400
@@ -1673,8 +1673,10 @@ vt6655_probe(struct pci_dev *pcid, const
 
 	priv->hw->max_signal = 100;
 
-	if (vnt_init(priv))
+	if (vnt_init(priv)) {
+		device_free_info(priv);
 		return -ENODEV;
+	}
 
 	device_print_info(priv);
 	pci_set_drvdata(pcid, priv);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/thermal/thermal_core.c linux-libre-4.9.197-gnu/drivers/thermal/thermal_core.c
--- linux-libre-4.9.196-gnu/drivers/thermal/thermal_core.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/thermal/thermal_core.c	2019-10-17 16:42:47.000000000 -0400
@@ -402,7 +402,7 @@ static void thermal_zone_device_set_poll
 		mod_delayed_work(system_freezable_wq, &tz->poll_queue,
 				 msecs_to_jiffies(delay));
 	else
-		cancel_delayed_work(&tz->poll_queue);
+		cancel_delayed_work_sync(&tz->poll_queue);
 }
 
 static void monitor_thermal_zone(struct thermal_zone_device *tz)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/tty/serial/uartlite.c linux-libre-4.9.197-gnu/drivers/tty/serial/uartlite.c
--- linux-libre-4.9.196-gnu/drivers/tty/serial/uartlite.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/tty/serial/uartlite.c	2019-10-17 16:42:47.000000000 -0400
@@ -746,7 +746,8 @@ err_uart:
 static void __exit ulite_exit(void)
 {
 	platform_driver_unregister(&ulite_platform_driver);
-	uart_unregister_driver(&ulite_uart_driver);
+	if (ulite_uart_driver.state)
+		uart_unregister_driver(&ulite_uart_driver);
 }
 
 module_init(ulite_init);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/class/usblp.c linux-libre-4.9.197-gnu/drivers/usb/class/usblp.c
--- linux-libre-4.9.196-gnu/drivers/usb/class/usblp.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/class/usblp.c	2019-10-17 16:42:47.000000000 -0400
@@ -474,10 +474,12 @@ static int usblp_release(struct inode *i
 
 	mutex_lock(&usblp_mutex);
 	usblp->used = 0;
-	if (usblp->present) {
+	if (usblp->present)
 		usblp_unlink_urbs(usblp);
-		usb_autopm_put_interface(usblp->intf);
-	} else		/* finish cleanup from disconnect */
+
+	usb_autopm_put_interface(usblp->intf);
+
+	if (!usblp->present)		/* finish cleanup from disconnect */
 		usblp_cleanup(usblp);
 	mutex_unlock(&usblp_mutex);
 	return 0;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/gadget/udc/dummy_hcd.c linux-libre-4.9.197-gnu/drivers/usb/gadget/udc/dummy_hcd.c
--- linux-libre-4.9.196-gnu/drivers/usb/gadget/udc/dummy_hcd.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/gadget/udc/dummy_hcd.c	2019-10-17 16:42:47.000000000 -0400
@@ -50,6 +50,7 @@
 #define DRIVER_VERSION	"02 May 2005"
 
 #define POWER_BUDGET	500	/* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3	900	/* in mA */
 
 static const char	driver_name[] = "dummy_hcd";
 static const char	driver_desc[] = "USB Host+Gadget Emulator";
@@ -2433,7 +2434,7 @@ static int dummy_start_ss(struct dummy_h
 	dum_hcd->rh_state = DUMMY_RH_RUNNING;
 	dum_hcd->stream_en_ep = 0;
 	INIT_LIST_HEAD(&dum_hcd->urbp_list);
-	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
 	dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
 	dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
 #ifdef CONFIG_USB_OTG
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/host/xhci.c linux-libre-4.9.197-gnu/drivers/usb/host/xhci.c
--- linux-libre-4.9.196-gnu/drivers/usb/host/xhci.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/host/xhci.c	2019-10-17 16:42:47.000000000 -0400
@@ -985,7 +985,7 @@ int xhci_suspend(struct xhci_hcd *xhci,
 	command |= CMD_CSS;
 	writel(command, &xhci->op_regs->command);
 	if (xhci_handshake(&xhci->op_regs->status,
-				STS_SAVE, 0, 10 * 1000)) {
+				STS_SAVE, 0, 20 * 1000)) {
 		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
@@ -1045,6 +1045,18 @@ int xhci_resume(struct xhci_hcd *xhci, b
 		hibernated = true;
 
 	if (!hibernated) {
+		/*
+		 * Some controllers might lose power during suspend, so wait
+		 * for controller not ready bit to clear, just as in xHC init.
+		 */
+		retval = xhci_handshake(&xhci->op_regs->status,
+					STS_CNR, 0, 10 * 1000 * 1000);
+		if (retval) {
+			xhci_warn(xhci, "Controller not ready at resume %d\n",
+				  retval);
+			spin_unlock_irq(&xhci->lock);
+			return retval;
+		}
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */
@@ -4510,12 +4522,12 @@ static int xhci_update_timeout_for_endpo
 	alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
 		desc, state, timeout);
 
-	/* If we found we can't enable hub-initiated LPM, or
+	/* If we found we can't enable hub-initiated LPM, and
 	 * the U1 or U2 exit latency was too high to allow
-	 * device-initiated LPM as well, just stop searching.
+	 * device-initiated LPM as well, then we will disable LPM
+	 * for this device, so stop searching any further.
 	 */
-	if (alt_timeout == USB3_LPM_DISABLED ||
-			alt_timeout == USB3_LPM_DEVICE_INITIATED) {
+	if (alt_timeout == USB3_LPM_DISABLED) {
 		*timeout = alt_timeout;
 		return -E2BIG;
 	}
@@ -4626,10 +4638,12 @@ static u16 xhci_calculate_lpm_timeout(st
 		if (intf->dev.driver) {
 			driver = to_usb_driver(intf->dev.driver);
 			if (driver && driver->disable_hub_initiated_lpm) {
-				dev_dbg(&udev->dev, "Hub-initiated %s disabled "
-						"at request of driver %s\n",
-						state_name, driver->name);
-				return xhci_get_timeout_no_hub_lpm(udev, state);
+				dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+					state_name, driver->name);
+				timeout = xhci_get_timeout_no_hub_lpm(udev,
+								      state);
+				if (timeout == USB3_LPM_DISABLED)
+					return timeout;
 			}
 		}
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/host/xhci-ring.c linux-libre-4.9.197-gnu/drivers/usb/host/xhci-ring.c
--- linux-libre-4.9.196-gnu/drivers/usb/host/xhci-ring.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/host/xhci-ring.c	2019-10-17 16:42:47.000000000 -0400
@@ -3200,10 +3200,10 @@ static int xhci_align_td(struct xhci_hcd
 	if (usb_urb_dir_out(urb)) {
 		len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
 				   seg->bounce_buf, new_buff_len, enqd_len);
-		if (len != seg->bounce_len)
+		if (len != new_buff_len)
 			xhci_warn(xhci,
 				"WARN Wrong bounce buffer write length: %zu != %d\n",
-				len, seg->bounce_len);
+				len, new_buff_len);
 		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
 						 max_pkt, DMA_TO_DEVICE);
 	} else {
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/image/microtek.c linux-libre-4.9.197-gnu/drivers/usb/image/microtek.c
--- linux-libre-4.9.196-gnu/drivers/usb/image/microtek.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/image/microtek.c	2019-10-17 16:42:47.000000000 -0400
@@ -724,6 +724,10 @@ static int mts_usb_probe(struct usb_inte
 
 	}
 
+	if (ep_in_current != &ep_in_set[2]) {
+		MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n");
+		return -ENODEV;
+	}
 
 	if ( ep_out == -1 ) {
 		MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/adutux.c linux-libre-4.9.197-gnu/drivers/usb/misc/adutux.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/adutux.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/adutux.c	2019-10-17 16:42:47.000000000 -0400
@@ -80,6 +80,7 @@ struct adu_device {
 	char			serial_number[8];
 
 	int			open_count; /* number of times this port has been opened */
+	unsigned long		disconnected:1;
 
 	char		*read_buffer_primary;
 	int			read_buffer_length;
@@ -121,7 +122,7 @@ static void adu_abort_transfers(struct a
 {
 	unsigned long flags;
 
-	if (dev->udev == NULL)
+	if (dev->disconnected)
 		return;
 
 	/* shutdown transfer */
@@ -151,6 +152,7 @@ static void adu_delete(struct adu_device
 	kfree(dev->read_buffer_secondary);
 	kfree(dev->interrupt_in_buffer);
 	kfree(dev->interrupt_out_buffer);
+	usb_put_dev(dev->udev);
 	kfree(dev);
 }
 
@@ -244,7 +246,7 @@ static int adu_open(struct inode *inode,
 	}
 
 	dev = usb_get_intfdata(interface);
-	if (!dev || !dev->udev) {
+	if (!dev) {
 		retval = -ENODEV;
 		goto exit_no_device;
 	}
@@ -327,7 +329,7 @@ static int adu_release(struct inode *ino
 	}
 
 	adu_release_internal(dev);
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		/* the device was unplugged before the file was released */
 		if (!dev->open_count)	/* ... and we're the last user */
 			adu_delete(dev);
@@ -356,7 +358,7 @@ static ssize_t adu_read(struct file *fil
 		return -ERESTARTSYS;
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto exit;
@@ -525,7 +527,7 @@ static ssize_t adu_write(struct file *fi
 		goto exit_nolock;
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto exit;
@@ -679,7 +681,7 @@ static int adu_probe(struct usb_interfac
 
 	mutex_init(&dev->mtx);
 	spin_lock_init(&dev->buflock);
-	dev->udev = udev;
+	dev->udev = usb_get_dev(udev);
 	init_waitqueue_head(&dev->read_wait);
 	init_waitqueue_head(&dev->write_wait);
 
@@ -789,19 +791,21 @@ error:
 static void adu_disconnect(struct usb_interface *interface)
 {
 	struct adu_device *dev;
-	int minor;
 
 	dev = usb_get_intfdata(interface);
 
-	mutex_lock(&dev->mtx);	/* not interruptible */
-	dev->udev = NULL;	/* poison */
-	minor = dev->minor;
 	usb_deregister_dev(interface, &adu_class);
-	mutex_unlock(&dev->mtx);
+
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
 
 	mutex_lock(&adutux_mutex);
 	usb_set_intfdata(interface, NULL);
 
+	mutex_lock(&dev->mtx);	/* not interruptible */
+	dev->disconnected = 1;
+	mutex_unlock(&dev->mtx);
+
 	/* if the device is not opened, then we clean up right now */
 	if (!dev->open_count)
 		adu_delete(dev);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/chaoskey.c linux-libre-4.9.197-gnu/drivers/usb/misc/chaoskey.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/chaoskey.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/chaoskey.c	2019-10-17 16:42:47.000000000 -0400
@@ -108,6 +108,7 @@ static void chaoskey_free(struct chaoske
 		usb_free_urb(dev->urb);
 		kfree(dev->name);
 		kfree(dev->buf);
+		usb_put_intf(dev->interface);
 		kfree(dev);
 	}
 }
@@ -157,6 +158,8 @@ static int chaoskey_probe(struct usb_int
 	if (dev == NULL)
 		goto out;
 
+	dev->interface = usb_get_intf(interface);
+
 	dev->buf = kmalloc(size, GFP_KERNEL);
 
 	if (dev->buf == NULL)
@@ -190,8 +193,6 @@ static int chaoskey_probe(struct usb_int
 		strcat(dev->name, udev->serial);
 	}
 
-	dev->interface = interface;
-
 	dev->in_ep = in_ep;
 
 	if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/iowarrior.c linux-libre-4.9.197-gnu/drivers/usb/misc/iowarrior.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/iowarrior.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/iowarrior.c	2019-10-17 16:42:47.000000000 -0400
@@ -89,6 +89,7 @@ struct iowarrior {
 	char chip_serial[9];		/* the serial number string of the chip connected */
 	int report_size;		/* number of bytes in a report */
 	u16 product_id;
+	struct usb_anchor submitted;
 };
 
 /*--------------*/
@@ -248,6 +249,7 @@ static inline void iowarrior_delete(stru
 	kfree(dev->int_in_buffer);
 	usb_free_urb(dev->int_in_urb);
 	kfree(dev->read_queue);
+	usb_put_intf(dev->interface);
 	kfree(dev);
 }
 
@@ -434,11 +436,13 @@ static ssize_t iowarrior_write(struct fi
 			retval = -EFAULT;
 			goto error;
 		}
+		usb_anchor_urb(int_out_urb, &dev->submitted);
 		retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
 		if (retval) {
 			dev_dbg(&dev->interface->dev,
 				"submit error %d for urb nr.%d\n",
 				retval, atomic_read(&dev->write_busy));
+			usb_unanchor_urb(int_out_urb);
 			goto error;
 		}
 		/* submit was ok */
@@ -776,11 +780,13 @@ static int iowarrior_probe(struct usb_in
 	init_waitqueue_head(&dev->write_wait);
 
 	dev->udev = udev;
-	dev->interface = interface;
+	dev->interface = usb_get_intf(interface);
 
 	iface_desc = interface->cur_altsetting;
 	dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
 
+	init_usb_anchor(&dev->submitted);
+
 	/* set up the endpoint information */
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 		endpoint = &iface_desc->endpoint[i].desc;
@@ -886,8 +892,6 @@ static void iowarrior_disconnect(struct
 	dev = usb_get_intfdata(interface);
 	mutex_lock(&iowarrior_open_disc_lock);
 	usb_set_intfdata(interface, NULL);
-	/* prevent device read, write and ioctl */
-	dev->present = 0;
 
 	minor = dev->minor;
 	mutex_unlock(&iowarrior_open_disc_lock);
@@ -898,8 +902,7 @@ static void iowarrior_disconnect(struct
 	mutex_lock(&dev->mutex);
 
 	/* prevent device read, write and ioctl */
-
-	mutex_unlock(&dev->mutex);
+	dev->present = 0;
 
 	if (dev->opened) {
 		/* There is a process that holds a filedescriptor to the device ,
@@ -907,10 +910,13 @@ static void iowarrior_disconnect(struct
 		   Deleting the device is postponed until close() was called.
 		 */
 		usb_kill_urb(dev->int_in_urb);
+		usb_kill_anchored_urbs(&dev->submitted);
 		wake_up_interruptible(&dev->read_wait);
 		wake_up_interruptible(&dev->write_wait);
+		mutex_unlock(&dev->mutex);
 	} else {
 		/* no process is using the device, cleanup now */
+		mutex_unlock(&dev->mutex);
 		iowarrior_delete(dev);
 	}
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/Kconfig linux-libre-4.9.197-gnu/drivers/usb/misc/Kconfig
--- linux-libre-4.9.196-gnu/drivers/usb/misc/Kconfig	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/Kconfig	2019-10-17 16:42:47.000000000 -0400
@@ -46,16 +46,6 @@ config USB_SEVSEG
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbsevseg.
 
-config USB_RIO500
-	tristate "USB Diamond Rio500 support"
-	help
-	  Say Y here if you want to connect a USB Rio500 mp3 player to your
-	  computer's USB port. Please read <file:Documentation/usb/rio.txt>
-	  for more information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rio500.
-
 config USB_LEGOTOWER
 	tristate "USB Lego Infrared Tower support"
 	help
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/ldusb.c linux-libre-4.9.197-gnu/drivers/usb/misc/ldusb.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/ldusb.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/ldusb.c	2019-10-17 16:42:47.000000000 -0400
@@ -158,6 +158,7 @@ MODULE_PARM_DESC(min_interrupt_out_inter
 struct ld_usb {
 	struct mutex		mutex;		/* locks this structure */
 	struct usb_interface*	intf;		/* save off the usb interface pointer */
+	unsigned long		disconnected:1;
 
 	int			open_count;	/* number of times this port has been opened */
 
@@ -197,12 +198,10 @@ static void ld_usb_abort_transfers(struc
 	/* shutdown transfer */
 	if (dev->interrupt_in_running) {
 		dev->interrupt_in_running = 0;
-		if (dev->intf)
-			usb_kill_urb(dev->interrupt_in_urb);
+		usb_kill_urb(dev->interrupt_in_urb);
 	}
 	if (dev->interrupt_out_busy)
-		if (dev->intf)
-			usb_kill_urb(dev->interrupt_out_urb);
+		usb_kill_urb(dev->interrupt_out_urb);
 }
 
 /**
@@ -210,8 +209,6 @@ static void ld_usb_abort_transfers(struc
  */
 static void ld_usb_delete(struct ld_usb *dev)
 {
-	ld_usb_abort_transfers(dev);
-
 	/* free data structures */
 	usb_free_urb(dev->interrupt_in_urb);
 	usb_free_urb(dev->interrupt_out_urb);
@@ -267,7 +264,7 @@ static void ld_usb_interrupt_in_callback
 
 resubmit:
 	/* resubmit if we're still running */
-	if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) {
+	if (dev->interrupt_in_running && !dev->buffer_overflow) {
 		retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
 		if (retval) {
 			dev_err(&dev->intf->dev,
@@ -396,7 +393,7 @@ static int ld_usb_release(struct inode *
 		retval = -ENODEV;
 		goto unlock_exit;
 	}
-	if (dev->intf == NULL) {
+	if (dev->disconnected) {
 		/* the device was unplugged before the file was released */
 		mutex_unlock(&dev->mutex);
 		/* unlock here as ld_usb_delete frees dev */
@@ -427,7 +424,7 @@ static unsigned int ld_usb_poll(struct f
 
 	dev = file->private_data;
 
-	if (!dev->intf)
+	if (dev->disconnected)
 		return POLLERR | POLLHUP;
 
 	poll_wait(file, &dev->read_wait, wait);
@@ -466,7 +463,7 @@ static ssize_t ld_usb_read(struct file *
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->intf == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -546,7 +543,7 @@ static ssize_t ld_usb_write(struct file
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->intf == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -768,6 +765,9 @@ static void ld_usb_disconnect(struct usb
 	/* give back our minor */
 	usb_deregister_dev(intf, &ld_usb_class);
 
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
+
 	mutex_lock(&dev->mutex);
 
 	/* if the device is not opened, then we clean up right now */
@@ -775,7 +775,7 @@ static void ld_usb_disconnect(struct usb
 		mutex_unlock(&dev->mutex);
 		ld_usb_delete(dev);
 	} else {
-		dev->intf = NULL;
+		dev->disconnected = 1;
 		/* wake up pollers */
 		wake_up_interruptible_all(&dev->read_wait);
 		wake_up_interruptible_all(&dev->write_wait);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/legousbtower.c linux-libre-4.9.197-gnu/drivers/usb/misc/legousbtower.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/legousbtower.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/legousbtower.c	2019-10-17 16:42:47.000000000 -0400
@@ -185,7 +185,6 @@ static const struct usb_device_id tower_
 };
 
 MODULE_DEVICE_TABLE (usb, tower_table);
-static DEFINE_MUTEX(open_disc_mutex);
 
 #define LEGO_USB_TOWER_MINOR_BASE	160
 
@@ -197,6 +196,7 @@ struct lego_usb_tower {
 	unsigned char		minor;		/* the starting minor number for this device */
 
 	int			open_count;	/* number of times this port has been opened */
+	unsigned long		disconnected:1;
 
 	char*			read_buffer;
 	size_t			read_buffer_length; /* this much came in */
@@ -296,14 +296,13 @@ static inline void lego_usb_tower_debug_
  */
 static inline void tower_delete (struct lego_usb_tower *dev)
 {
-	tower_abort_transfers (dev);
-
 	/* free data structures */
 	usb_free_urb(dev->interrupt_in_urb);
 	usb_free_urb(dev->interrupt_out_urb);
 	kfree (dev->read_buffer);
 	kfree (dev->interrupt_in_buffer);
 	kfree (dev->interrupt_out_buffer);
+	usb_put_dev(dev->udev);
 	kfree (dev);
 }
 
@@ -338,18 +337,14 @@ static int tower_open (struct inode *ino
 		goto exit;
 	}
 
-	mutex_lock(&open_disc_mutex);
 	dev = usb_get_intfdata(interface);
-
 	if (!dev) {
-		mutex_unlock(&open_disc_mutex);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	/* lock this device */
 	if (mutex_lock_interruptible(&dev->lock)) {
-		mutex_unlock(&open_disc_mutex);
 	        retval = -ERESTARTSYS;
 		goto exit;
 	}
@@ -357,12 +352,9 @@ static int tower_open (struct inode *ino
 
 	/* allow opening only once */
 	if (dev->open_count) {
-		mutex_unlock(&open_disc_mutex);
 		retval = -EBUSY;
 		goto unlock_exit;
 	}
-	dev->open_count = 1;
-	mutex_unlock(&open_disc_mutex);
 
 	/* reset the tower */
 	result = usb_control_msg (dev->udev,
@@ -402,13 +394,14 @@ static int tower_open (struct inode *ino
 		dev_err(&dev->udev->dev,
 			"Couldn't submit interrupt_in_urb %d\n", retval);
 		dev->interrupt_in_running = 0;
-		dev->open_count = 0;
 		goto unlock_exit;
 	}
 
 	/* save device in the file's private structure */
 	file->private_data = dev;
 
+	dev->open_count = 1;
+
 unlock_exit:
 	mutex_unlock(&dev->lock);
 
@@ -429,10 +422,9 @@ static int tower_release (struct inode *
 
 	if (dev == NULL) {
 		retval = -ENODEV;
-		goto exit_nolock;
+		goto exit;
 	}
 
-	mutex_lock(&open_disc_mutex);
 	if (mutex_lock_interruptible(&dev->lock)) {
 	        retval = -ERESTARTSYS;
 		goto exit;
@@ -444,7 +436,8 @@ static int tower_release (struct inode *
 		retval = -ENODEV;
 		goto unlock_exit;
 	}
-	if (dev->udev == NULL) {
+
+	if (dev->disconnected) {
 		/* the device was unplugged before the file was released */
 
 		/* unlock here as tower_delete frees dev */
@@ -462,10 +455,7 @@ static int tower_release (struct inode *
 
 unlock_exit:
 	mutex_unlock(&dev->lock);
-
 exit:
-	mutex_unlock(&open_disc_mutex);
-exit_nolock:
 	return retval;
 }
 
@@ -483,10 +473,9 @@ static void tower_abort_transfers (struc
 	if (dev->interrupt_in_running) {
 		dev->interrupt_in_running = 0;
 		mb();
-		if (dev->udev)
-			usb_kill_urb (dev->interrupt_in_urb);
+		usb_kill_urb(dev->interrupt_in_urb);
 	}
-	if (dev->interrupt_out_busy && dev->udev)
+	if (dev->interrupt_out_busy)
 		usb_kill_urb(dev->interrupt_out_urb);
 }
 
@@ -522,7 +511,7 @@ static unsigned int tower_poll (struct f
 
 	dev = file->private_data;
 
-	if (!dev->udev)
+	if (dev->disconnected)
 		return POLLERR | POLLHUP;
 
 	poll_wait(file, &dev->read_wait, wait);
@@ -569,7 +558,7 @@ static ssize_t tower_read (struct file *
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -655,7 +644,7 @@ static ssize_t tower_write (struct file
 	}
 
 	/* verify that the device wasn't unplugged */
-	if (dev->udev == NULL) {
+	if (dev->disconnected) {
 		retval = -ENODEV;
 		pr_err("No device or device unplugged %d\n", retval);
 		goto unlock_exit;
@@ -764,7 +753,7 @@ static void tower_interrupt_in_callback
 
 resubmit:
 	/* resubmit if we're still running */
-	if (dev->interrupt_in_running && dev->udev) {
+	if (dev->interrupt_in_running) {
 		retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC);
 		if (retval)
 			dev_err(&dev->udev->dev,
@@ -830,8 +819,9 @@ static int tower_probe (struct usb_inter
 
 	mutex_init(&dev->lock);
 
-	dev->udev = udev;
+	dev->udev = usb_get_dev(udev);
 	dev->open_count = 0;
+	dev->disconnected = 0;
 
 	dev->read_buffer = NULL;
 	dev->read_buffer_length = 0;
@@ -911,8 +901,10 @@ static int tower_probe (struct usb_inter
 				  get_version_reply,
 				  sizeof(*get_version_reply),
 				  1000);
-	if (result < 0) {
-		dev_err(idev, "LEGO USB Tower get version control request failed\n");
+	if (result < sizeof(*get_version_reply)) {
+		if (result >= 0)
+			result = -EIO;
+		dev_err(idev, "get version request failed: %d\n", result);
 		retval = result;
 		goto error;
 	}
@@ -930,7 +922,6 @@ static int tower_probe (struct usb_inter
 	if (retval) {
 		/* something prevented us from registering this driver */
 		dev_err(idev, "Not able to get a minor for this device.\n");
-		usb_set_intfdata (interface, NULL);
 		goto error;
 	}
 	dev->minor = interface->minor;
@@ -962,23 +953,24 @@ static void tower_disconnect (struct usb
 	int minor;
 
 	dev = usb_get_intfdata (interface);
-	mutex_lock(&open_disc_mutex);
-	usb_set_intfdata (interface, NULL);
 
 	minor = dev->minor;
 
-	/* give back our minor */
+	/* give back our minor and prevent further open() */
 	usb_deregister_dev (interface, &tower_class);
 
+	/* stop I/O */
+	usb_poison_urb(dev->interrupt_in_urb);
+	usb_poison_urb(dev->interrupt_out_urb);
+
 	mutex_lock(&dev->lock);
-	mutex_unlock(&open_disc_mutex);
 
 	/* if the device is not opened, then we clean up right now */
 	if (!dev->open_count) {
 		mutex_unlock(&dev->lock);
 		tower_delete (dev);
 	} else {
-		dev->udev = NULL;
+		dev->disconnected = 1;
 		/* wake up pollers */
 		wake_up_interruptible_all(&dev->read_wait);
 		wake_up_interruptible_all(&dev->write_wait);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/Makefile linux-libre-4.9.197-gnu/drivers/usb/misc/Makefile
--- linux-libre-4.9.196-gnu/drivers/usb/misc/Makefile	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/Makefile	2019-10-17 16:42:47.000000000 -0400
@@ -16,7 +16,6 @@ obj-$(CONFIG_USB_ISIGHTFW)		+= isight_fi
 obj-$(CONFIG_USB_LCD)			+= usblcd.o
 obj-$(CONFIG_USB_LD)			+= ldusb.o
 obj-$(CONFIG_USB_LEGOTOWER)		+= legousbtower.o
-obj-$(CONFIG_USB_RIO500)		+= rio500.o
 obj-$(CONFIG_USB_TEST)			+= usbtest.o
 obj-$(CONFIG_USB_EHSET_TEST_FIXTURE)    += ehset.o
 obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/rio500.c linux-libre-4.9.197-gnu/drivers/usb/misc/rio500.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/rio500.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/rio500.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,578 +0,0 @@
-/* -*- linux-c -*- */
-
-/* 
- * Driver for USB Rio 500
- *
- * Cesar Miquel (miquel@df.uba.ar)
- * 
- * based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
- * 
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
- *
- * Changelog:
- * 30/05/2003  replaced lock/unlock kernel with up/down
- *             Daniele Bellucci  bellucda@tiscali.it
- * */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/random.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/usb.h>
-#include <linux/wait.h>
-
-#include "rio500_usb.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1"
-#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>"
-#define DRIVER_DESC "USB Rio 500 driver"
-
-#define RIO_MINOR	64
-
-/* stall/wait timeout for rio */
-#define NAK_TIMEOUT (HZ)
-
-#define IBUF_SIZE 0x1000
-
-/* Size of the rio buffer */
-#define OBUF_SIZE 0x10000
-
-struct rio_usb_data {
-        struct usb_device *rio_dev;     /* init: probe_rio */
-        unsigned int ifnum;             /* Interface number of the USB device */
-        int isopen;                     /* nz if open */
-        int present;                    /* Device is present on the bus */
-        char *obuf, *ibuf;              /* transfer buffers */
-        char bulk_in_ep, bulk_out_ep;   /* Endpoint assignments */
-        wait_queue_head_t wait_q;       /* for timeouts */
-	struct mutex lock;          /* general race avoidance */
-};
-
-static DEFINE_MUTEX(rio500_mutex);
-static struct rio_usb_data rio_instance;
-
-static int open_rio(struct inode *inode, struct file *file)
-{
-	struct rio_usb_data *rio = &rio_instance;
-
-	/* against disconnect() */
-	mutex_lock(&rio500_mutex);
-	mutex_lock(&(rio->lock));
-
-	if (rio->isopen || !rio->present) {
-		mutex_unlock(&(rio->lock));
-		mutex_unlock(&rio500_mutex);
-		return -EBUSY;
-	}
-	rio->isopen = 1;
-
-	init_waitqueue_head(&rio->wait_q);
-
-	mutex_unlock(&(rio->lock));
-
-	dev_info(&rio->rio_dev->dev, "Rio opened.\n");
-	mutex_unlock(&rio500_mutex);
-
-	return 0;
-}
-
-static int close_rio(struct inode *inode, struct file *file)
-{
-	struct rio_usb_data *rio = &rio_instance;
-
-	/* against disconnect() */
-	mutex_lock(&rio500_mutex);
-	mutex_lock(&(rio->lock));
-
-	rio->isopen = 0;
-	if (!rio->present) {
-		/* cleanup has been delayed */
-		kfree(rio->ibuf);
-		kfree(rio->obuf);
-		rio->ibuf = NULL;
-		rio->obuf = NULL;
-	} else {
-		dev_info(&rio->rio_dev->dev, "Rio closed.\n");
-	}
-	mutex_unlock(&(rio->lock));
-	mutex_unlock(&rio500_mutex);
-	return 0;
-}
-
-static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct RioCommand rio_cmd;
-	struct rio_usb_data *rio = &rio_instance;
-	void __user *data;
-	unsigned char *buffer;
-	int result, requesttype;
-	int retries;
-	int retval=0;
-
-	mutex_lock(&(rio->lock));
-        /* Sanity check to make sure rio is connected, powered, etc */
-        if (rio->present == 0 || rio->rio_dev == NULL) {
-		retval = -ENODEV;
-		goto err_out;
-	}
-
-	switch (cmd) {
-	case RIO_RECV_COMMAND:
-		data = (void __user *) arg;
-		if (data == NULL)
-			break;
-		if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
-			retval = -EFAULT;
-			goto err_out;
-		}
-		if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
-			retval = -EINVAL;
-			goto err_out;
-		}
-		buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
-		if (buffer == NULL) {
-			retval = -ENOMEM;
-			goto err_out;
-		}
-		if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
-			retval = -EFAULT;
-			free_page((unsigned long) buffer);
-			goto err_out;
-		}
-
-		requesttype = rio_cmd.requesttype | USB_DIR_IN |
-		    USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-		dev_dbg(&rio->rio_dev->dev,
-			"sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
-			requesttype, rio_cmd.request, rio_cmd.value,
-			rio_cmd.index, rio_cmd.length);
-		/* Send rio control message */
-		retries = 3;
-		while (retries) {
-			result = usb_control_msg(rio->rio_dev,
-						 usb_rcvctrlpipe(rio-> rio_dev, 0),
-						 rio_cmd.request,
-						 requesttype,
-						 rio_cmd.value,
-						 rio_cmd.index, buffer,
-						 rio_cmd.length,
-						 jiffies_to_msecs(rio_cmd.timeout));
-			if (result == -ETIMEDOUT)
-				retries--;
-			else if (result < 0) {
-				dev_err(&rio->rio_dev->dev,
-					"Error executing ioctrl. code = %d\n",
-					result);
-				retries = 0;
-			} else {
-				dev_dbg(&rio->rio_dev->dev,
-					"Executed ioctl. Result = %d (data=%02x)\n",
-					result, buffer[0]);
-				if (copy_to_user(rio_cmd.buffer, buffer,
-						 rio_cmd.length)) {
-					free_page((unsigned long) buffer);
-					retval = -EFAULT;
-					goto err_out;
-				}
-				retries = 0;
-			}
-
-			/* rio_cmd.buffer contains a raw stream of single byte
-			   data which has been returned from rio.  Data is
-			   interpreted at application level.  For data that
-			   will be cast to data types longer than 1 byte, data
-			   will be little_endian and will potentially need to
-			   be swapped at the app level */
-
-		}
-		free_page((unsigned long) buffer);
-		break;
-
-	case RIO_SEND_COMMAND:
-		data = (void __user *) arg;
-		if (data == NULL)
-			break;
-		if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
-			retval = -EFAULT;
-			goto err_out;
-		}
-		if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
-			retval = -EINVAL;
-			goto err_out;
-		}
-		buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
-		if (buffer == NULL) {
-			retval = -ENOMEM;
-			goto err_out;
-		}
-		if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
-			free_page((unsigned long)buffer);
-			retval = -EFAULT;
-			goto err_out;
-		}
-
-		requesttype = rio_cmd.requesttype | USB_DIR_OUT |
-		    USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-		dev_dbg(&rio->rio_dev->dev,
-			"sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
-			requesttype, rio_cmd.request, rio_cmd.value,
-			rio_cmd.index, rio_cmd.length);
-		/* Send rio control message */
-		retries = 3;
-		while (retries) {
-			result = usb_control_msg(rio->rio_dev,
-						 usb_sndctrlpipe(rio-> rio_dev, 0),
-						 rio_cmd.request,
-						 requesttype,
-						 rio_cmd.value,
-						 rio_cmd.index, buffer,
-						 rio_cmd.length,
-						 jiffies_to_msecs(rio_cmd.timeout));
-			if (result == -ETIMEDOUT)
-				retries--;
-			else if (result < 0) {
-				dev_err(&rio->rio_dev->dev,
-					"Error executing ioctrl. code = %d\n",
-					result);
-				retries = 0;
-			} else {
-				dev_dbg(&rio->rio_dev->dev,
-					"Executed ioctl. Result = %d\n", result);
-				retries = 0;
-
-			}
-
-		}
-		free_page((unsigned long) buffer);
-		break;
-
-	default:
-		retval = -ENOTTY;
-		break;
-	}
-
-
-err_out:
-	mutex_unlock(&(rio->lock));
-	return retval;
-}
-
-static ssize_t
-write_rio(struct file *file, const char __user *buffer,
-	  size_t count, loff_t * ppos)
-{
-	DEFINE_WAIT(wait);
-	struct rio_usb_data *rio = &rio_instance;
-
-	unsigned long copy_size;
-	unsigned long bytes_written = 0;
-	unsigned int partial;
-
-	int result = 0;
-	int maxretry;
-	int errn = 0;
-	int intr;
-
-	intr = mutex_lock_interruptible(&(rio->lock));
-	if (intr)
-		return -EINTR;
-        /* Sanity check to make sure rio is connected, powered, etc */
-        if (rio->present == 0 || rio->rio_dev == NULL) {
-		mutex_unlock(&(rio->lock));
-		return -ENODEV;
-	}
-
-
-
-	do {
-		unsigned long thistime;
-		char *obuf = rio->obuf;
-
-		thistime = copy_size =
-		    (count >= OBUF_SIZE) ? OBUF_SIZE : count;
-		if (copy_from_user(rio->obuf, buffer, copy_size)) {
-			errn = -EFAULT;
-			goto error;
-		}
-		maxretry = 5;
-		while (thistime) {
-			if (!rio->rio_dev) {
-				errn = -ENODEV;
-				goto error;
-			}
-			if (signal_pending(current)) {
-				mutex_unlock(&(rio->lock));
-				return bytes_written ? bytes_written : -EINTR;
-			}
-
-			result = usb_bulk_msg(rio->rio_dev,
-					 usb_sndbulkpipe(rio->rio_dev, 2),
-					 obuf, thistime, &partial, 5000);
-
-			dev_dbg(&rio->rio_dev->dev,
-				"write stats: result:%d thistime:%lu partial:%u\n",
-				result, thistime, partial);
-
-			if (result == -ETIMEDOUT) {	/* NAK - so hold for a while */
-				if (!maxretry--) {
-					errn = -ETIME;
-					goto error;
-				}
-				prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
-				schedule_timeout(NAK_TIMEOUT);
-				finish_wait(&rio->wait_q, &wait);
-				continue;
-			} else if (!result && partial) {
-				obuf += partial;
-				thistime -= partial;
-			} else
-				break;
-		}
-		if (result) {
-			dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n",
-				result);
-			errn = -EIO;
-			goto error;
-		}
-		bytes_written += copy_size;
-		count -= copy_size;
-		buffer += copy_size;
-	} while (count > 0);
-
-	mutex_unlock(&(rio->lock));
-
-	return bytes_written ? bytes_written : -EIO;
-
-error:
-	mutex_unlock(&(rio->lock));
-	return errn;
-}
-
-static ssize_t
-read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
-{
-	DEFINE_WAIT(wait);
-	struct rio_usb_data *rio = &rio_instance;
-	ssize_t read_count;
-	unsigned int partial;
-	int this_read;
-	int result;
-	int maxretry = 10;
-	char *ibuf;
-	int intr;
-
-	intr = mutex_lock_interruptible(&(rio->lock));
-	if (intr)
-		return -EINTR;
-	/* Sanity check to make sure rio is connected, powered, etc */
-        if (rio->present == 0 || rio->rio_dev == NULL) {
-		mutex_unlock(&(rio->lock));
-		return -ENODEV;
-	}
-
-	ibuf = rio->ibuf;
-
-	read_count = 0;
-
-
-	while (count > 0) {
-		if (signal_pending(current)) {
-			mutex_unlock(&(rio->lock));
-			return read_count ? read_count : -EINTR;
-		}
-		if (!rio->rio_dev) {
-			mutex_unlock(&(rio->lock));
-			return -ENODEV;
-		}
-		this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
-
-		result = usb_bulk_msg(rio->rio_dev,
-				      usb_rcvbulkpipe(rio->rio_dev, 1),
-				      ibuf, this_read, &partial,
-				      8000);
-
-		dev_dbg(&rio->rio_dev->dev,
-			"read stats: result:%d this_read:%u partial:%u\n",
-			result, this_read, partial);
-
-		if (partial) {
-			count = this_read = partial;
-		} else if (result == -ETIMEDOUT || result == 15) {	/* FIXME: 15 ??? */
-			if (!maxretry--) {
-				mutex_unlock(&(rio->lock));
-				dev_err(&rio->rio_dev->dev,
-					"read_rio: maxretry timeout\n");
-				return -ETIME;
-			}
-			prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
-			schedule_timeout(NAK_TIMEOUT);
-			finish_wait(&rio->wait_q, &wait);
-			continue;
-		} else if (result != -EREMOTEIO) {
-			mutex_unlock(&(rio->lock));
-			dev_err(&rio->rio_dev->dev,
-				"Read Whoops - result:%u partial:%u this_read:%u\n",
-				result, partial, this_read);
-			return -EIO;
-		} else {
-			mutex_unlock(&(rio->lock));
-			return (0);
-		}
-
-		if (this_read) {
-			if (copy_to_user(buffer, ibuf, this_read)) {
-				mutex_unlock(&(rio->lock));
-				return -EFAULT;
-			}
-			count -= this_read;
-			read_count += this_read;
-			buffer += this_read;
-		}
-	}
-	mutex_unlock(&(rio->lock));
-	return read_count;
-}
-
-static const struct file_operations usb_rio_fops = {
-	.owner =	THIS_MODULE,
-	.read =		read_rio,
-	.write =	write_rio,
-	.unlocked_ioctl = ioctl_rio,
-	.open =		open_rio,
-	.release =	close_rio,
-	.llseek =	noop_llseek,
-};
-
-static struct usb_class_driver usb_rio_class = {
-	.name =		"rio500%d",
-	.fops =		&usb_rio_fops,
-	.minor_base =	RIO_MINOR,
-};
-
-static int probe_rio(struct usb_interface *intf,
-		     const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct rio_usb_data *rio = &rio_instance;
-	int retval = 0;
-
-	mutex_lock(&rio500_mutex);
-	if (rio->present) {
-		dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
-		retval = -EBUSY;
-		goto bail_out;
-	} else {
-		dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
-	}
-
-	retval = usb_register_dev(intf, &usb_rio_class);
-	if (retval) {
-		dev_err(&dev->dev,
-			"Not able to get a minor for this device.\n");
-		retval = -ENOMEM;
-		goto bail_out;
-	}
-
-	rio->rio_dev = dev;
-
-	if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) {
-		dev_err(&dev->dev,
-			"probe_rio: Not enough memory for the output buffer\n");
-		usb_deregister_dev(intf, &usb_rio_class);
-		retval = -ENOMEM;
-		goto bail_out;
-	}
-	dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
-
-	if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
-		dev_err(&dev->dev,
-			"probe_rio: Not enough memory for the input buffer\n");
-		usb_deregister_dev(intf, &usb_rio_class);
-		kfree(rio->obuf);
-		retval = -ENOMEM;
-		goto bail_out;
-	}
-	dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
-
-	mutex_init(&(rio->lock));
-
-	usb_set_intfdata (intf, rio);
-	rio->present = 1;
-bail_out:
-	mutex_unlock(&rio500_mutex);
-
-	return retval;
-}
-
-static void disconnect_rio(struct usb_interface *intf)
-{
-	struct rio_usb_data *rio = usb_get_intfdata (intf);
-
-	usb_set_intfdata (intf, NULL);
-	mutex_lock(&rio500_mutex);
-	if (rio) {
-		usb_deregister_dev(intf, &usb_rio_class);
-
-		mutex_lock(&(rio->lock));
-		if (rio->isopen) {
-			rio->isopen = 0;
-			/* better let it finish - the release will do whats needed */
-			rio->rio_dev = NULL;
-			mutex_unlock(&(rio->lock));
-			mutex_unlock(&rio500_mutex);
-			return;
-		}
-		kfree(rio->ibuf);
-		kfree(rio->obuf);
-
-		dev_info(&intf->dev, "USB Rio disconnected.\n");
-
-		rio->present = 0;
-		mutex_unlock(&(rio->lock));
-	}
-	mutex_unlock(&rio500_mutex);
-}
-
-static const struct usb_device_id rio_table[] = {
-	{ USB_DEVICE(0x0841, 1) }, 		/* Rio 500 */
-	{ }					/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, rio_table);
-
-static struct usb_driver rio_driver = {
-	.name =		"rio500",
-	.probe =	probe_rio,
-	.disconnect =	disconnect_rio,
-	.id_table =	rio_table,
-};
-
-module_usb_driver(rio_driver);
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
-
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/rio500_usb.h linux-libre-4.9.197-gnu/drivers/usb/misc/rio500_usb.h
--- linux-libre-4.9.196-gnu/drivers/usb/misc/rio500_usb.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/rio500_usb.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,37 +0,0 @@
-/*  ----------------------------------------------------------------------
-
-    Copyright (C) 2000  Cesar Miquel  (miquel@df.uba.ar)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    ---------------------------------------------------------------------- */
-
-
-
-#define RIO_SEND_COMMAND			0x1
-#define RIO_RECV_COMMAND			0x2
-
-#define RIO_DIR_OUT               	        0x0
-#define RIO_DIR_IN				0x1
-
-struct RioCommand {
-	short length;
-	int request;
-	int requesttype;
-	int value;
-	int index;
-	void __user *buffer;
-	int timeout;
-};
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/usblcd.c linux-libre-4.9.197-gnu/drivers/usb/misc/usblcd.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/usblcd.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/usblcd.c	2019-10-17 16:42:47.000000000 -0400
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
+#include <linux/rwsem.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 
@@ -56,6 +57,8 @@ struct usb_lcd {
 							   using up all RAM */
 	struct usb_anchor	submitted;		/* URBs to wait for
 							   before suspend */
+	struct rw_semaphore	io_rwsem;
+	unsigned long		disconnected:1;
 };
 #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
 
@@ -141,6 +144,13 @@ static ssize_t lcd_read(struct file *fil
 
 	dev = file->private_data;
 
+	down_read(&dev->io_rwsem);
+
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto out_up_io;
+	}
+
 	/* do a blocking bulk read to get data from the device */
 	retval = usb_bulk_msg(dev->udev,
 			      usb_rcvbulkpipe(dev->udev,
@@ -157,6 +167,9 @@ static ssize_t lcd_read(struct file *fil
 			retval = bytes_read;
 	}
 
+out_up_io:
+	up_read(&dev->io_rwsem);
+
 	return retval;
 }
 
@@ -236,11 +249,18 @@ static ssize_t lcd_write(struct file *fi
 	if (r < 0)
 		return -EINTR;
 
+	down_read(&dev->io_rwsem);
+
+	if (dev->disconnected) {
+		retval = -ENODEV;
+		goto err_up_io;
+	}
+
 	/* create a urb, and a buffer for it, and copy the data to the urb */
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb) {
 		retval = -ENOMEM;
-		goto err_no_buf;
+		goto err_up_io;
 	}
 
 	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL,
@@ -277,6 +297,7 @@ static ssize_t lcd_write(struct file *fi
 	   the USB core will eventually free it entirely */
 	usb_free_urb(urb);
 
+	up_read(&dev->io_rwsem);
 exit:
 	return count;
 error_unanchor:
@@ -284,7 +305,8 @@ error_unanchor:
 error:
 	usb_free_coherent(dev->udev, count, buf, urb->transfer_dma);
 	usb_free_urb(urb);
-err_no_buf:
+err_up_io:
+	up_read(&dev->io_rwsem);
 	up(&dev->limit_sem);
 	return retval;
 }
@@ -325,6 +347,7 @@ static int lcd_probe(struct usb_interfac
 		goto error;
 	kref_init(&dev->kref);
 	sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES);
+	init_rwsem(&dev->io_rwsem);
 	init_usb_anchor(&dev->submitted);
 
 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
@@ -432,6 +455,12 @@ static void lcd_disconnect(struct usb_in
 	/* give back our minor */
 	usb_deregister_dev(interface, &lcd_class);
 
+	down_write(&dev->io_rwsem);
+	dev->disconnected = 1;
+	up_write(&dev->io_rwsem);
+
+	usb_kill_anchored_urbs(&dev->submitted);
+
 	/* decrement our usage count */
 	kref_put(&dev->kref, lcd_delete);
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/misc/yurex.c linux-libre-4.9.197-gnu/drivers/usb/misc/yurex.c
--- linux-libre-4.9.196-gnu/drivers/usb/misc/yurex.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/misc/yurex.c	2019-10-17 16:42:47.000000000 -0400
@@ -64,6 +64,7 @@ struct usb_yurex {
 
 	struct kref		kref;
 	struct mutex		io_mutex;
+	unsigned long		disconnected:1;
 	struct fasync_struct	*async_queue;
 	wait_queue_head_t	waitq;
 
@@ -111,6 +112,7 @@ static void yurex_delete(struct kref *kr
 				dev->int_buffer, dev->urb->transfer_dma);
 		usb_free_urb(dev->urb);
 	}
+	usb_put_intf(dev->interface);
 	usb_put_dev(dev->udev);
 	kfree(dev);
 }
@@ -136,6 +138,7 @@ static void yurex_interrupt(struct urb *
 	switch (status) {
 	case 0: /*success*/
 		break;
+	/* The device is terminated or messed up, give up */
 	case -EOVERFLOW:
 		dev_err(&dev->interface->dev,
 			"%s - overflow with length %d, actual length is %d\n",
@@ -144,12 +147,13 @@ static void yurex_interrupt(struct urb *
 	case -ENOENT:
 	case -ESHUTDOWN:
 	case -EILSEQ:
-		/* The device is terminated, clean up */
+	case -EPROTO:
+	case -ETIME:
 		return;
 	default:
 		dev_err(&dev->interface->dev,
 			"%s - unknown status received: %d\n", __func__, status);
-		goto exit;
+		return;
 	}
 
 	/* handle received message */
@@ -181,7 +185,6 @@ static void yurex_interrupt(struct urb *
 		break;
 	}
 
-exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval) {
 		dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n",
@@ -208,7 +211,7 @@ static int yurex_probe(struct usb_interf
 	init_waitqueue_head(&dev->waitq);
 
 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
-	dev->interface = interface;
+	dev->interface = usb_get_intf(interface);
 
 	/* set up the endpoint information */
 	iface_desc = interface->cur_altsetting;
@@ -325,8 +328,9 @@ static void yurex_disconnect(struct usb_
 
 	/* prevent more I/O from starting */
 	usb_poison_urb(dev->urb);
+	usb_poison_urb(dev->cntl_urb);
 	mutex_lock(&dev->io_mutex);
-	dev->interface = NULL;
+	dev->disconnected = 1;
 	mutex_unlock(&dev->io_mutex);
 
 	/* wakeup waiters */
@@ -414,7 +418,7 @@ static ssize_t yurex_read(struct file *f
 	dev = file->private_data;
 
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {		/* already disconnected */
+	if (dev->disconnected) {		/* already disconnected */
 		mutex_unlock(&dev->io_mutex);
 		return -ENODEV;
 	}
@@ -449,7 +453,7 @@ static ssize_t yurex_write(struct file *
 		goto error;
 
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {		/* already disconnected */
+	if (dev->disconnected) {		/* already disconnected */
 		mutex_unlock(&dev->io_mutex);
 		retval = -ENODEV;
 		goto error;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/common.h linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/common.h
--- linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/common.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/common.h	2019-10-17 16:42:47.000000000 -0400
@@ -213,6 +213,7 @@ struct usbhs_priv;
 /* DCPCTR */
 #define BSTS		(1 << 15)	/* Buffer Status */
 #define SUREQ		(1 << 14)	/* Sending SETUP Token */
+#define INBUFM		(1 << 14)	/* (PIPEnCTR) Transfer Buffer Monitor */
 #define CSSTS		(1 << 12)	/* CSSTS Status */
 #define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
 #define SQCLR		(1 << 8)	/* Toggle Bit Clear */
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/fifo.c linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/fifo.c
--- linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/fifo.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/fifo.c	2019-10-17 16:42:47.000000000 -0400
@@ -98,7 +98,7 @@ static void __usbhsf_pkt_del(struct usbh
 	list_del_init(&pkt->node);
 }
 
-static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
 {
 	if (list_empty(&pipe->list))
 		return NULL;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/fifo.h linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/fifo.h
--- linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/fifo.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/fifo.h	2019-10-17 16:42:47.000000000 -0400
@@ -106,5 +106,6 @@ void usbhs_pkt_push(struct usbhs_pipe *p
 		    void *buf, int len, int zero, int sequence);
 struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
 void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
 
 #endif /* RENESAS_USB_FIFO_H */
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/mod_gadget.c linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/mod_gadget.c
--- linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/mod_gadget.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/mod_gadget.c	2019-10-17 16:42:47.000000000 -0400
@@ -729,8 +729,7 @@ static int __usbhsg_ep_set_halt_wedge(st
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
 	unsigned long flags;
-
-	usbhsg_pipe_disable(uep);
+	int ret = 0;
 
 	dev_dbg(dev, "set halt %d (pipe %d)\n",
 		halt, usbhs_pipe_number(pipe));
@@ -738,6 +737,18 @@ static int __usbhsg_ep_set_halt_wedge(st
 	/********************  spin lock ********************/
 	usbhs_lock(priv, flags);
 
+	/*
+	 * According to usb_ep_set_halt()'s description, this function should
+	 * return -EAGAIN if the IN endpoint has any queue or data. Note
+	 * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+	 * IN endpoint in the gadget mode.
+	 */
+	if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+	    usbhs_pipe_contains_transmittable_data(pipe))) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
 	if (halt)
 		usbhs_pipe_stall(pipe);
 	else
@@ -748,10 +759,11 @@ static int __usbhsg_ep_set_halt_wedge(st
 	else
 		usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
 
+out:
 	usbhs_unlock(priv, flags);
 	/********************  spin unlock ******************/
 
-	return 0;
+	return ret;
 }
 
 static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/pipe.c linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/pipe.c
--- linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/pipe.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/pipe.c	2019-10-17 16:42:47.000000000 -0400
@@ -286,6 +286,21 @@ int usbhs_pipe_is_accessible(struct usbh
 	return -EBUSY;
 }
 
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+	u16 val;
+
+	/* Do not support for DCP pipe */
+	if (usbhs_pipe_is_dcp(pipe))
+		return false;
+
+	val = usbhsp_pipectrl_get(pipe);
+	if (val & INBUFM)
+		return true;
+
+	return false;
+}
+
 /*
  *		PID ctrl
  */
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/pipe.h linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/pipe.h
--- linux-libre-4.9.196-gnu/drivers/usb/renesas_usbhs/pipe.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/renesas_usbhs/pipe.h	2019-10-17 16:42:47.000000000 -0400
@@ -90,6 +90,7 @@ void usbhs_pipe_init(struct usbhs_priv *
 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
 void usbhs_pipe_clear(struct usbhs_pipe *pipe);
 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
 void usbhs_pipe_enable(struct usbhs_pipe *pipe);
 void usbhs_pipe_disable(struct usbhs_pipe *pipe);
 void usbhs_pipe_stall(struct usbhs_pipe *pipe);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/serial/ftdi_sio.c linux-libre-4.9.197-gnu/drivers/usb/serial/ftdi_sio.c
--- linux-libre-4.9.196-gnu/drivers/usb/serial/ftdi_sio.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/serial/ftdi_sio.c	2019-10-17 16:42:47.000000000 -0400
@@ -1025,6 +1025,9 @@ static const struct usb_device_id id_tab
 	/* EZPrototypes devices */
 	{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
 	{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) },
+	/* Sienna devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
+	{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
 	{ }					/* Terminating entry */
 };
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/serial/ftdi_sio_ids.h linux-libre-4.9.197-gnu/drivers/usb/serial/ftdi_sio_ids.h
--- linux-libre-4.9.196-gnu/drivers/usb/serial/ftdi_sio_ids.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/serial/ftdi_sio_ids.h	2019-10-17 16:42:47.000000000 -0400
@@ -38,6 +38,9 @@
 
 #define FTDI_LUMEL_PD12_PID	0x6002
 
+/* Sienna Serial Interface by Secyourit GmbH */
+#define FTDI_SIENNA_PID		0x8348
+
 /* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
 #define CYBER_CORTEX_AV_PID	0x8698
 
@@ -688,6 +691,12 @@
 #define BANDB_ZZ_PROG1_USB_PID	0xBA02
 
 /*
+ * Echelon USB Serial Interface
+ */
+#define ECHELON_VID		0x0920
+#define ECHELON_U20_PID		0x7500
+
+/*
  * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
  */
 #define INTREPID_VID		0x093C
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/serial/keyspan.c linux-libre-4.9.197-gnu/drivers/usb/serial/keyspan.c
--- linux-libre-4.9.196-gnu/drivers/usb/serial/keyspan.c	2019-10-07 21:28:15.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/serial/keyspan.c	2019-10-17 19:01:32.000000000 -0400
@@ -1250,8 +1250,8 @@ static struct urb *keyspan_setup_urb(str
 
 	ep_desc = find_ep(serial, endpoint);
 	if (!ep_desc) {
-		/* leak the urb, something's wrong and the callers don't care */
-		return urb;
+		usb_free_urb(urb);
+		return NULL;
 	}
 	if (usb_endpoint_xfer_int(ep_desc)) {
 		ep_type_name = "INT";
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/serial/option.c linux-libre-4.9.197-gnu/drivers/usb/serial/option.c
--- linux-libre-4.9.196-gnu/drivers/usb/serial/option.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/serial/option.c	2019-10-17 16:42:47.000000000 -0400
@@ -421,6 +421,7 @@ static void option_instat_callback(struc
 #define CINTERION_PRODUCT_PH8_AUDIO		0x0083
 #define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
 #define CINTERION_PRODUCT_AHXX_AUDIO		0x0085
+#define CINTERION_PRODUCT_CLS8			0x00b0
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -1149,6 +1150,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
 	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1050, 0xff),	/* Telit FN980 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1051, 0xff),	/* Telit FN980 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1052, 0xff),	/* Telit FN980 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff),	/* Telit FN980 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
@@ -1842,6 +1851,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff),
+	  .driver_info = RSVD(0) | RSVD(4) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/serial/usb-serial.c linux-libre-4.9.197-gnu/drivers/usb/serial/usb-serial.c
--- linux-libre-4.9.196-gnu/drivers/usb/serial/usb-serial.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/serial/usb-serial.c	2019-10-17 16:42:47.000000000 -0400
@@ -315,10 +315,7 @@ static void serial_cleanup(struct tty_st
 	serial = port->serial;
 	owner = serial->type->driver.owner;
 
-	mutex_lock(&serial->disc_mutex);
-	if (!serial->disconnected)
-		usb_autopm_put_interface(serial->interface);
-	mutex_unlock(&serial->disc_mutex);
+	usb_autopm_put_interface(serial->interface);
 
 	usb_serial_put(serial);
 	module_put(owner);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/usb/usb-skeleton.c linux-libre-4.9.197-gnu/drivers/usb/usb-skeleton.c
--- linux-libre-4.9.196-gnu/drivers/usb/usb-skeleton.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/usb/usb-skeleton.c	2019-10-17 16:42:47.000000000 -0400
@@ -63,6 +63,7 @@ struct usb_skel {
 	spinlock_t		err_lock;		/* lock for errors */
 	struct kref		kref;
 	struct mutex		io_mutex;		/* synchronize I/O with disconnect */
+	unsigned long		disconnected:1;
 	wait_queue_head_t	bulk_in_wait;		/* to wait for an ongoing read */
 };
 #define to_skel_dev(d) container_of(d, struct usb_skel, kref)
@@ -75,6 +76,7 @@ static void skel_delete(struct kref *kre
 	struct usb_skel *dev = to_skel_dev(kref);
 
 	usb_free_urb(dev->bulk_in_urb);
+	usb_put_intf(dev->interface);
 	usb_put_dev(dev->udev);
 	kfree(dev->bulk_in_buffer);
 	kfree(dev);
@@ -126,10 +128,7 @@ static int skel_release(struct inode *in
 		return -ENODEV;
 
 	/* allow the device to be autosuspended */
-	mutex_lock(&dev->io_mutex);
-	if (dev->interface)
-		usb_autopm_put_interface(dev->interface);
-	mutex_unlock(&dev->io_mutex);
+	usb_autopm_put_interface(dev->interface);
 
 	/* decrement the count on our device */
 	kref_put(&dev->kref, skel_delete);
@@ -241,7 +240,7 @@ static ssize_t skel_read(struct file *fi
 	if (rv < 0)
 		return rv;
 
-	if (!dev->interface) {		/* disconnect() was called */
+	if (dev->disconnected) {		/* disconnect() was called */
 		rv = -ENODEV;
 		goto exit;
 	}
@@ -422,7 +421,7 @@ static ssize_t skel_write(struct file *f
 
 	/* this lock makes sure we don't submit URBs to gone devices */
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {		/* disconnect() was called */
+	if (dev->disconnected) {		/* disconnect() was called */
 		mutex_unlock(&dev->io_mutex);
 		retval = -ENODEV;
 		goto error;
@@ -509,7 +508,7 @@ static int skel_probe(struct usb_interfa
 	init_waitqueue_head(&dev->bulk_in_wait);
 
 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
-	dev->interface = interface;
+	dev->interface = usb_get_intf(interface);
 
 	/* set up the endpoint information */
 	/* use only the first bulk-in and bulk-out endpoints */
@@ -582,7 +581,7 @@ static void skel_disconnect(struct usb_i
 
 	/* prevent more I/O from starting */
 	mutex_lock(&dev->io_mutex);
-	dev->interface = NULL;
+	dev->disconnected = 1;
 	mutex_unlock(&dev->io_mutex);
 
 	usb_kill_anchored_urbs(&dev->submitted);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/watchdog/imx2_wdt.c linux-libre-4.9.197-gnu/drivers/watchdog/imx2_wdt.c
--- linux-libre-4.9.196-gnu/drivers/watchdog/imx2_wdt.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/watchdog/imx2_wdt.c	2019-10-17 16:42:47.000000000 -0400
@@ -58,7 +58,7 @@
 
 #define IMX2_WDT_WMCR		0x08		/* Misc Register */
 
-#define IMX2_WDT_MAX_TIME	128
+#define IMX2_WDT_MAX_TIME	128U
 #define IMX2_WDT_DEFAULT_TIME	60		/* in seconds */
 
 #define WDOG_SEC_TO_COUNT(s)	((s * 2 - 1) << 8)
@@ -183,7 +183,7 @@ static int imx2_wdt_set_timeout(struct w
 {
 	unsigned int actual;
 
-	actual = min(new_timeout, wdog->max_hw_heartbeat_ms * 1000);
+	actual = min(new_timeout, IMX2_WDT_MAX_TIME);
 	__imx2_wdt_set_timeout(wdog, actual);
 	wdog->timeout = new_timeout;
 	return 0;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/drivers/xen/pci.c linux-libre-4.9.197-gnu/drivers/xen/pci.c
--- linux-libre-4.9.196-gnu/drivers/xen/pci.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/drivers/xen/pci.c	2019-10-17 16:42:47.000000000 -0400
@@ -29,6 +29,8 @@
 #include "../pci/pci.h"
 #ifdef CONFIG_PCI_MMCONFIG
 #include <asm/pci_x86.h>
+
+static int xen_mcfg_late(void);
 #endif
 
 static bool __read_mostly pci_seg_supported = true;
@@ -40,7 +42,18 @@ static int xen_add_device(struct device
 #ifdef CONFIG_PCI_IOV
 	struct pci_dev *physfn = pci_dev->physfn;
 #endif
-
+#ifdef CONFIG_PCI_MMCONFIG
+	static bool pci_mcfg_reserved = false;
+	/*
+	 * Reserve MCFG areas in Xen on first invocation due to this being
+	 * potentially called from inside of acpi_init immediately after
+	 * MCFG table has been finally parsed.
+	 */
+	if (!pci_mcfg_reserved) {
+		xen_mcfg_late();
+		pci_mcfg_reserved = true;
+	}
+#endif
 	if (pci_seg_supported) {
 		struct {
 			struct physdev_pci_device_add add;
@@ -213,7 +226,7 @@ static int __init register_xen_pci_notif
 arch_initcall(register_xen_pci_notifier);
 
 #ifdef CONFIG_PCI_MMCONFIG
-static int __init xen_mcfg_late(void)
+static int xen_mcfg_late(void)
 {
 	struct pci_mmcfg_region *cfg;
 	int rc;
@@ -252,8 +265,4 @@ static int __init xen_mcfg_late(void)
 	}
 	return 0;
 }
-/*
- * Needs to be done after acpi_init which are subsys_initcall.
- */
-subsys_initcall_sync(xen_mcfg_late);
 #endif
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/9p/vfs_file.c linux-libre-4.9.197-gnu/fs/9p/vfs_file.c
--- linux-libre-4.9.196-gnu/fs/9p/vfs_file.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/9p/vfs_file.c	2019-10-17 16:42:47.000000000 -0400
@@ -528,6 +528,7 @@ v9fs_mmap_file_mmap(struct file *filp, s
 	v9inode = V9FS_I(inode);
 	mutex_lock(&v9inode->v_mutex);
 	if (!v9inode->writeback_fid &&
+	    (vma->vm_flags & VM_SHARED) &&
 	    (vma->vm_flags & VM_WRITE)) {
 		/*
 		 * clone a fid and add it to writeback_fid
@@ -629,6 +630,8 @@ static void v9fs_mmap_vm_close(struct vm
 			(vma->vm_end - vma->vm_start - 1),
 	};
 
+	if (!(vma->vm_flags & VM_SHARED))
+		return;
 
 	p9_debug(P9_DEBUG_VFS, "9p VMA close, %p, flushing", vma);
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/ceph/inode.c linux-libre-4.9.197-gnu/fs/ceph/inode.c
--- linux-libre-4.9.196-gnu/fs/ceph/inode.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/ceph/inode.c	2019-10-17 16:42:47.000000000 -0400
@@ -800,7 +800,12 @@ static int fill_inode(struct inode *inod
 	ci->i_version = le64_to_cpu(info->version);
 	inode->i_version++;
 	inode->i_rdev = le32_to_cpu(info->rdev);
-	inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+	/* directories have fl_stripe_unit set to zero */
+	if (le32_to_cpu(info->layout.fl_stripe_unit))
+		inode->i_blkbits =
+			fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+	else
+		inode->i_blkbits = CEPH_BLOCK_SHIFT;
 
 	if ((new_version || (new_issued & CEPH_CAP_AUTH_SHARED)) &&
 	    (issued & CEPH_CAP_AUTH_EXCL) == 0) {
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/ceph/mds_client.c linux-libre-4.9.197-gnu/fs/ceph/mds_client.c
--- linux-libre-4.9.196-gnu/fs/ceph/mds_client.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/ceph/mds_client.c	2019-10-17 16:42:47.000000000 -0400
@@ -3410,7 +3410,9 @@ static void delayed_work(struct work_str
 				pr_info("mds%d hung\n", s->s_mds);
 			}
 		}
-		if (s->s_state < CEPH_MDS_SESSION_OPEN) {
+		if (s->s_state == CEPH_MDS_SESSION_NEW ||
+		    s->s_state == CEPH_MDS_SESSION_RESTARTING ||
+		    s->s_state == CEPH_MDS_SESSION_REJECTED) {
 			/* this mds is failed or recovering, just wait */
 			ceph_put_mds_session(s);
 			continue;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/cifs/dir.c linux-libre-4.9.197-gnu/fs/cifs/dir.c
--- linux-libre-4.9.196-gnu/fs/cifs/dir.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/cifs/dir.c	2019-10-17 16:42:47.000000000 -0400
@@ -830,10 +830,16 @@ lookup_out:
 static int
 cifs_d_revalidate(struct dentry *direntry, unsigned int flags)
 {
+	struct inode *inode;
+
 	if (flags & LOOKUP_RCU)
 		return -ECHILD;
 
 	if (d_really_is_positive(direntry)) {
+		inode = d_inode(direntry);
+		if ((flags & LOOKUP_REVAL) && !CIFS_CACHE_READ(CIFS_I(inode)))
+			CIFS_I(inode)->time = 0; /* force reval */
+
 		if (cifs_revalidate_dentry(direntry))
 			return 0;
 		else {
@@ -844,7 +850,7 @@ cifs_d_revalidate(struct dentry *direntr
 			 * attributes will have been updated by
 			 * cifs_revalidate_dentry().
 			 */
-			if (IS_AUTOMOUNT(d_inode(direntry)) &&
+			if (IS_AUTOMOUNT(inode) &&
 			   !(direntry->d_flags & DCACHE_NEED_AUTOMOUNT)) {
 				spin_lock(&direntry->d_lock);
 				direntry->d_flags |= DCACHE_NEED_AUTOMOUNT;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/cifs/file.c linux-libre-4.9.197-gnu/fs/cifs/file.c
--- linux-libre-4.9.196-gnu/fs/cifs/file.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/cifs/file.c	2019-10-17 16:42:47.000000000 -0400
@@ -252,6 +252,12 @@ cifs_nt_open(char *full_path, struct ino
 		rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
 					 xid, fid);
 
+	if (rc) {
+		server->ops->close(xid, tcon, fid);
+		if (rc == -ESTALE)
+			rc = -EOPENSTALE;
+	}
+
 out:
 	kfree(buf);
 	return rc;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/cifs/inode.c linux-libre-4.9.197-gnu/fs/cifs/inode.c
--- linux-libre-4.9.196-gnu/fs/cifs/inode.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/cifs/inode.c	2019-10-17 16:42:47.000000000 -0400
@@ -405,6 +405,7 @@ int cifs_get_inode_info_unix(struct inod
 		/* if uniqueid is different, return error */
 		if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
 		    CIFS_I(*pinode)->uniqueid != fattr.cf_uniqueid)) {
+			CIFS_I(*pinode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgiiu_exit;
 		}
@@ -412,6 +413,7 @@ int cifs_get_inode_info_unix(struct inod
 		/* if filetype is different, return error */
 		if (unlikely(((*pinode)->i_mode & S_IFMT) !=
 		    (fattr.cf_mode & S_IFMT))) {
+			CIFS_I(*pinode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgiiu_exit;
 		}
@@ -917,6 +919,7 @@ cifs_get_inode_info(struct inode **inode
 		/* if uniqueid is different, return error */
 		if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
 		    CIFS_I(*inode)->uniqueid != fattr.cf_uniqueid)) {
+			CIFS_I(*inode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgii_exit;
 		}
@@ -924,6 +927,7 @@ cifs_get_inode_info(struct inode **inode
 		/* if filetype is different, return error */
 		if (unlikely(((*inode)->i_mode & S_IFMT) !=
 		    (fattr.cf_mode & S_IFMT))) {
+			CIFS_I(*inode)->time = 0; /* force reval */
 			rc = -ESTALE;
 			goto cgii_exit;
 		}
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/fuse/cuse.c linux-libre-4.9.197-gnu/fs/fuse/cuse.c
--- linux-libre-4.9.196-gnu/fs/fuse/cuse.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/fuse/cuse.c	2019-10-17 16:42:47.000000000 -0400
@@ -513,6 +513,7 @@ static int cuse_channel_open(struct inod
 	rc = cuse_send_init(cc);
 	if (rc) {
 		fuse_dev_free(fud);
+		fuse_conn_put(&cc->fc);
 		return rc;
 	}
 	file->private_data = fud;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/libfs.c linux-libre-4.9.197-gnu/fs/libfs.c
--- linux-libre-4.9.196-gnu/fs/libfs.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/libfs.c	2019-10-17 16:42:47.000000000 -0400
@@ -85,58 +85,47 @@ int dcache_dir_close(struct inode *inode
 EXPORT_SYMBOL(dcache_dir_close);
 
 /* parent is locked at least shared */
-static struct dentry *next_positive(struct dentry *parent,
-				    struct list_head *from,
-				    int count)
+/*
+ * Returns an element of siblings' list.
+ * We are looking for <count>th positive after <p>; if
+ * found, dentry is grabbed and passed to caller via *<res>.
+ * If no such element exists, the anchor of list is returned
+ * and *<res> is set to NULL.
+ */
+static struct list_head *scan_positives(struct dentry *cursor,
+					struct list_head *p,
+					loff_t count,
+					struct dentry **res)
 {
-	unsigned *seq = &parent->d_inode->i_dir_seq, n;
-	struct dentry *res;
-	struct list_head *p;
-	bool skipped;
-	int i;
+	struct dentry *dentry = cursor->d_parent, *found = NULL;
 
-retry:
-	i = count;
-	skipped = false;
-	n = smp_load_acquire(seq) & ~1;
-	res = NULL;
-	rcu_read_lock();
-	for (p = from->next; p != &parent->d_subdirs; p = p->next) {
+	spin_lock(&dentry->d_lock);
+	while ((p = p->next) != &dentry->d_subdirs) {
 		struct dentry *d = list_entry(p, struct dentry, d_child);
-		if (!simple_positive(d)) {
-			skipped = true;
-		} else if (!--i) {
-			res = d;
-			break;
+		// we must at least skip cursors, to avoid livelocks
+		if (d->d_flags & DCACHE_DENTRY_CURSOR)
+			continue;
+		if (simple_positive(d) && !--count) {
+			spin_lock_nested(&d->d_lock, DENTRY_D_LOCK_NESTED);
+			if (simple_positive(d))
+				found = dget_dlock(d);
+			spin_unlock(&d->d_lock);
+			if (likely(found))
+				break;
+			count = 1;
+		}
+		if (need_resched()) {
+			list_move(&cursor->d_child, p);
+			p = &cursor->d_child;
+			spin_unlock(&dentry->d_lock);
+			cond_resched();
+			spin_lock(&dentry->d_lock);
 		}
 	}
-	rcu_read_unlock();
-	if (skipped) {
-		smp_rmb();
-		if (unlikely(*seq != n))
-			goto retry;
-	}
-	return res;
-}
-
-static void move_cursor(struct dentry *cursor, struct list_head *after)
-{
-	struct dentry *parent = cursor->d_parent;
-	unsigned n, *seq = &parent->d_inode->i_dir_seq;
-	spin_lock(&parent->d_lock);
-	for (;;) {
-		n = *seq;
-		if (!(n & 1) && cmpxchg(seq, n, n + 1) == n)
-			break;
-		cpu_relax();
-	}
-	__list_del(cursor->d_child.prev, cursor->d_child.next);
-	if (after)
-		list_add(&cursor->d_child, after);
-	else
-		list_add_tail(&cursor->d_child, &parent->d_subdirs);
-	smp_store_release(seq, n + 2);
-	spin_unlock(&parent->d_lock);
+	spin_unlock(&dentry->d_lock);
+	dput(*res);
+	*res = found;
+	return p;
 }
 
 loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence)
@@ -152,17 +141,28 @@ loff_t dcache_dir_lseek(struct file *fil
 			return -EINVAL;
 	}
 	if (offset != file->f_pos) {
+		struct dentry *cursor = file->private_data;
+		struct dentry *to = NULL;
+		struct list_head *p;
+
 		file->f_pos = offset;
-		if (file->f_pos >= 2) {
-			struct dentry *cursor = file->private_data;
-			struct dentry *to;
-			loff_t n = file->f_pos - 2;
+		inode_lock_shared(dentry->d_inode);
 
-			inode_lock_shared(dentry->d_inode);
-			to = next_positive(dentry, &dentry->d_subdirs, n);
-			move_cursor(cursor, to ? &to->d_child : NULL);
-			inode_unlock_shared(dentry->d_inode);
+		if (file->f_pos > 2) {
+			p = scan_positives(cursor, &dentry->d_subdirs,
+					   file->f_pos - 2, &to);
+			spin_lock(&dentry->d_lock);
+			list_move(&cursor->d_child, p);
+			spin_unlock(&dentry->d_lock);
+		} else {
+			spin_lock(&dentry->d_lock);
+			list_del_init(&cursor->d_child);
+			spin_unlock(&dentry->d_lock);
 		}
+
+		dput(to);
+
+		inode_unlock_shared(dentry->d_inode);
 	}
 	return offset;
 }
@@ -184,25 +184,29 @@ int dcache_readdir(struct file *file, st
 {
 	struct dentry *dentry = file->f_path.dentry;
 	struct dentry *cursor = file->private_data;
-	struct list_head *p = &cursor->d_child;
-	struct dentry *next;
-	bool moved = false;
+	struct list_head *anchor = &dentry->d_subdirs;
+	struct dentry *next = NULL;
+	struct list_head *p;
 
 	if (!dir_emit_dots(file, ctx))
 		return 0;
 
 	if (ctx->pos == 2)
-		p = &dentry->d_subdirs;
-	while ((next = next_positive(dentry, p, 1)) != NULL) {
+		p = anchor;
+	else
+		p = &cursor->d_child;
+
+	while ((p = scan_positives(cursor, p, 1, &next)) != anchor) {
 		if (!dir_emit(ctx, next->d_name.name, next->d_name.len,
 			      d_inode(next)->i_ino, dt_type(d_inode(next))))
 			break;
-		moved = true;
-		p = &next->d_child;
 		ctx->pos++;
 	}
-	if (moved)
-		move_cursor(cursor, p);
+	spin_lock(&dentry->d_lock);
+	list_move_tail(&cursor->d_child, p);
+	spin_unlock(&dentry->d_lock);
+	dput(next);
+
 	return 0;
 }
 EXPORT_SYMBOL(dcache_readdir);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/nfs/nfs4xdr.c linux-libre-4.9.197-gnu/fs/nfs/nfs4xdr.c
--- linux-libre-4.9.196-gnu/fs/nfs/nfs4xdr.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/nfs/nfs4xdr.c	2019-10-17 16:42:47.000000000 -0400
@@ -1123,7 +1123,7 @@ static void encode_attrs(struct xdr_stre
 		} else
 			*p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
 	}
-	if (bmval[2] & FATTR4_WORD2_SECURITY_LABEL) {
+	if (label && (bmval[2] & FATTR4_WORD2_SECURITY_LABEL)) {
 		*p++ = cpu_to_be32(label->lfs);
 		*p++ = cpu_to_be32(label->pi);
 		*p++ = cpu_to_be32(label->len);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/fs/xfs/xfs_super.c linux-libre-4.9.197-gnu/fs/xfs/xfs_super.c
--- linux-libre-4.9.196-gnu/fs/xfs/xfs_super.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/fs/xfs/xfs_super.c	2019-10-17 16:42:47.000000000 -0400
@@ -1674,6 +1674,7 @@ xfs_fs_fill_super(
  out_close_devices:
 	xfs_close_devices(mp);
  out_free_fsname:
+	sb->s_fs_info = NULL;
 	xfs_free_fsname(mp);
 	kfree(mp);
  out:
@@ -1691,6 +1692,10 @@ xfs_fs_put_super(
 {
 	struct xfs_mount	*mp = XFS_M(sb);
 
+	/* if ->fill_super failed, we have no mount to tear down */
+	if (!sb->s_fs_info)
+		return;
+
 	xfs_notice(mp, "Unmounting Filesystem");
 	xfs_filestream_unmount(mp);
 	xfs_unmountfs(mp);
@@ -1700,6 +1705,8 @@ xfs_fs_put_super(
 	xfs_destroy_percpu_counters(mp);
 	xfs_destroy_mount_workqueues(mp);
 	xfs_close_devices(mp);
+
+	sb->s_fs_info = NULL;
 	xfs_free_fsname(mp);
 	kfree(mp);
 }
@@ -1719,6 +1726,9 @@ xfs_fs_nr_cached_objects(
 	struct super_block	*sb,
 	struct shrink_control	*sc)
 {
+	/* Paranoia: catch incorrect calls during mount setup or teardown */
+	if (WARN_ON_ONCE(!sb->s_fs_info))
+		return 0;
 	return xfs_reclaim_inodes_count(XFS_M(sb));
 }
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/include/linux/ieee80211.h linux-libre-4.9.197-gnu/include/linux/ieee80211.h
--- linux-libre-4.9.196-gnu/include/linux/ieee80211.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/include/linux/ieee80211.h	2019-10-17 16:42:47.000000000 -0400
@@ -2630,4 +2630,57 @@ static inline bool ieee80211_action_cont
 	return true;
 }
 
+struct element {
+	u8 id;
+	u8 datalen;
+	u8 data[];
+} __packed;
+
+/* element iteration helpers */
+#define for_each_element(_elem, _data, _datalen)			\
+	for (_elem = (const struct element *)(_data);			\
+	     (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >=	\
+		(int)sizeof(*_elem) &&					\
+	     (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >=	\
+		(int)sizeof(*_elem) + _elem->datalen;			\
+	     _elem = (const struct element *)(_elem->data + _elem->datalen))
+
+#define for_each_element_id(element, _id, data, datalen)		\
+	for_each_element(element, data, datalen)			\
+		if (element->id == (_id))
+
+#define for_each_element_extid(element, extid, data, datalen)		\
+	for_each_element(element, data, datalen)			\
+		if (element->id == WLAN_EID_EXTENSION &&		\
+		    element->datalen > 0 &&				\
+		    element->data[0] == (extid))
+
+#define for_each_subelement(sub, element)				\
+	for_each_element(sub, (element)->data, (element)->datalen)
+
+#define for_each_subelement_id(sub, id, element)			\
+	for_each_element_id(sub, id, (element)->data, (element)->datalen)
+
+#define for_each_subelement_extid(sub, extid, element)			\
+	for_each_element_extid(sub, extid, (element)->data, (element)->datalen)
+
+/**
+ * for_each_element_completed - determine if element parsing consumed all data
+ * @element: element pointer after for_each_element() or friends
+ * @data: same data pointer as passed to for_each_element() or friends
+ * @datalen: same data length as passed to for_each_element() or friends
+ *
+ * This function returns %true if all the data was parsed or considered
+ * while walking the elements. Only use this if your for_each_element()
+ * loop cannot be broken out of, otherwise it always returns %false.
+ *
+ * If some data was malformed, this returns %false since the last parsed
+ * element will not fill the whole remaining data.
+ */
+static inline bool for_each_element_completed(const struct element *element,
+					      const void *data, size_t datalen)
+{
+	return (const u8 *)element == (const u8 *)data + datalen;
+}
+
 #endif /* LINUX_IEEE80211_H */
diff -druNp --no-dereference linux-libre-4.9.196-gnu/include/sound/soc-dapm.h linux-libre-4.9.197-gnu/include/sound/soc-dapm.h
--- linux-libre-4.9.196-gnu/include/sound/soc-dapm.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/include/sound/soc-dapm.h	2019-10-17 16:42:47.000000000 -0400
@@ -339,6 +339,8 @@ struct device;
 #define SND_SOC_DAPM_WILL_PMD   0x80    /* called at start of sequence */
 #define SND_SOC_DAPM_PRE_POST_PMD \
 				(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
+#define SND_SOC_DAPM_PRE_POST_PMU \
+				(SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU)
 
 /* convenience event type detection */
 #define SND_SOC_DAPM_EVENT_ON(e)	\
diff -druNp --no-dereference linux-libre-4.9.196-gnu/kernel/elfcore.c linux-libre-4.9.197-gnu/kernel/elfcore.c
--- linux-libre-4.9.196-gnu/kernel/elfcore.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/kernel/elfcore.c	2019-10-17 16:42:47.000000000 -0400
@@ -2,6 +2,7 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/binfmts.h>
+#include <linux/elfcore.h>
 
 Elf_Half __weak elf_core_extra_phdrs(void)
 {
diff -druNp --no-dereference linux-libre-4.9.196-gnu/kernel/fork.c linux-libre-4.9.197-gnu/kernel/fork.c
--- linux-libre-4.9.196-gnu/kernel/fork.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/kernel/fork.c	2019-10-17 16:42:47.000000000 -0400
@@ -2356,7 +2356,7 @@ int sysctl_max_threads(struct ctl_table
 	struct ctl_table t;
 	int ret;
 	int threads = max_threads;
-	int min = MIN_THREADS;
+	int min = 1;
 	int max = MAX_THREADS;
 
 	t = *table;
@@ -2368,7 +2368,7 @@ int sysctl_max_threads(struct ctl_table
 	if (ret || !write)
 		return ret;
 
-	set_max_threads(threads);
+	max_threads = threads;
 
 	return 0;
 }
diff -druNp --no-dereference linux-libre-4.9.196-gnu/kernel/panic.c linux-libre-4.9.197-gnu/kernel/panic.c
--- linux-libre-4.9.196-gnu/kernel/panic.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/kernel/panic.c	2019-10-17 16:42:47.000000000 -0400
@@ -144,6 +144,7 @@ void panic(const char *fmt, ...)
 	 * after setting panic_cpu) from invoking panic() again.
 	 */
 	local_irq_disable();
+	preempt_disable_notrace();
 
 	/*
 	 * It's possible to come here directly from a panic-assertion and
diff -druNp --no-dereference linux-libre-4.9.196-gnu/kernel/sched/core.c linux-libre-4.9.197-gnu/kernel/sched/core.c
--- linux-libre-4.9.196-gnu/kernel/sched/core.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/kernel/sched/core.c	2019-10-17 16:42:47.000000000 -0400
@@ -1162,7 +1162,8 @@ static int __set_cpus_allowed_ptr(struct
 	if (cpumask_equal(&p->cpus_allowed, new_mask))
 		goto out;
 
-	if (!cpumask_intersects(new_mask, cpu_valid_mask)) {
+	dest_cpu = cpumask_any_and(cpu_valid_mask, new_mask);
+	if (dest_cpu >= nr_cpu_ids) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1183,7 +1184,6 @@ static int __set_cpus_allowed_ptr(struct
 	if (cpumask_test_cpu(task_cpu(p), new_mask))
 		goto out;
 
-	dest_cpu = cpumask_any_and(cpu_valid_mask, new_mask);
 	if (task_running(rq, p) || p->state == TASK_WAKING) {
 		struct migration_arg arg = { p, dest_cpu };
 		/* Need help from migration thread: drop lock and wait. */
diff -druNp --no-dereference linux-libre-4.9.196-gnu/kernel/time/timer.c linux-libre-4.9.197-gnu/kernel/time/timer.c
--- linux-libre-4.9.196-gnu/kernel/time/timer.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/kernel/time/timer.c	2019-10-17 16:42:47.000000000 -0400
@@ -1586,21 +1586,23 @@ void timer_clear_idle(void)
 static int collect_expired_timers(struct timer_base *base,
 				  struct hlist_head *heads)
 {
+	unsigned long now = READ_ONCE(jiffies);
+
 	/*
 	 * NOHZ optimization. After a long idle sleep we need to forward the
 	 * base to current jiffies. Avoid a loop by searching the bitfield for
 	 * the next expiring timer.
 	 */
-	if ((long)(jiffies - base->clk) > 2) {
+	if ((long)(now - base->clk) > 2) {
 		unsigned long next = __next_timer_interrupt(base);
 
 		/*
 		 * If the next timer is ahead of time forward to current
 		 * jiffies, otherwise forward to the next expiry time:
 		 */
-		if (time_after(next, jiffies)) {
+		if (time_after(next, now)) {
 			/* The call site will increment clock! */
-			base->clk = jiffies - 1;
+			base->clk = now - 1;
 			return 0;
 		}
 		base->clk = next;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/kernel/trace/trace.c linux-libre-4.9.197-gnu/kernel/trace/trace.c
--- linux-libre-4.9.196-gnu/kernel/trace/trace.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/kernel/trace/trace.c	2019-10-17 16:42:47.000000000 -0400
@@ -3700,9 +3700,14 @@ static int show_traces_open(struct inode
 	if (tracing_disabled)
 		return -ENODEV;
 
+	if (trace_array_get(tr) < 0)
+		return -ENODEV;
+
 	ret = seq_open(file, &show_traces_seq_ops);
-	if (ret)
+	if (ret) {
+		trace_array_put(tr);
 		return ret;
+	}
 
 	m = file->private_data;
 	m->private = tr;
@@ -3710,6 +3715,14 @@ static int show_traces_open(struct inode
 	return 0;
 }
 
+static int show_traces_release(struct inode *inode, struct file *file)
+{
+	struct trace_array *tr = inode->i_private;
+
+	trace_array_put(tr);
+	return seq_release(inode, file);
+}
+
 static ssize_t
 tracing_write_stub(struct file *filp, const char __user *ubuf,
 		   size_t count, loff_t *ppos)
@@ -3740,8 +3753,8 @@ static const struct file_operations trac
 static const struct file_operations show_traces_fops = {
 	.open		= show_traces_open,
 	.read		= seq_read,
-	.release	= seq_release,
 	.llseek		= seq_lseek,
+	.release	= show_traces_release,
 };
 
 static ssize_t
diff -druNp --no-dereference linux-libre-4.9.196-gnu/kernel/trace/trace_hwlat.c linux-libre-4.9.197-gnu/kernel/trace/trace_hwlat.c
--- linux-libre-4.9.196-gnu/kernel/trace/trace_hwlat.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/kernel/trace/trace_hwlat.c	2019-10-17 16:42:47.000000000 -0400
@@ -151,7 +151,7 @@ void trace_hwlat_callback(bool enter)
 		if (enter)
 			nmi_ts_start = time_get();
 		else
-			nmi_total_ts = time_get() - nmi_ts_start;
+			nmi_total_ts += time_get() - nmi_ts_start;
 	}
 
 	if (enter)
@@ -257,6 +257,8 @@ static int get_sample(void)
 		/* Keep a running maximum ever recorded hardware latency */
 		if (sample > tr->max_latency)
 			tr->max_latency = sample;
+		if (outer_sample > tr->max_latency)
+			tr->max_latency = outer_sample;
 	}
 
 out:
diff -druNp --no-dereference linux-libre-4.9.196-gnu/MAINTAINERS linux-libre-4.9.197-gnu/MAINTAINERS
--- linux-libre-4.9.196-gnu/MAINTAINERS	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/MAINTAINERS	2019-10-17 16:42:47.000000000 -0400
@@ -12473,13 +12473,6 @@ W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c
 
-USB DIAMOND RIO500 DRIVER
-M:	Cesar Miquel <miquel@df.uba.ar>
-L:	rio500-users@lists.sourceforge.net
-W:	http://rio500.sourceforge.net
-S:	Maintained
-F:	drivers/usb/misc/rio500*
-
 USB EHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
diff -druNp --no-dereference linux-libre-4.9.196-gnu/Makefile linux-libre-4.9.197-gnu/Makefile
--- linux-libre-4.9.196-gnu/Makefile	2019-10-07 20:53:49.000000000 -0400
+++ linux-libre-4.9.197-gnu/Makefile	2019-10-17 18:34:05.000000000 -0400
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 196
+SUBLEVEL = 197
 EXTRAVERSION = -gnu
 NAME = Roaring Lionus
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/mm/usercopy.c linux-libre-4.9.197-gnu/mm/usercopy.c
--- linux-libre-4.9.196-gnu/mm/usercopy.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/mm/usercopy.c	2019-10-17 16:42:47.000000000 -0400
@@ -15,6 +15,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/mm.h>
+#include <linux/highmem.h>
 #include <linux/slab.h>
 #include <asm/sections.h>
 
@@ -217,7 +218,12 @@ static inline const char *check_heap_obj
 	if (!virt_addr_valid(ptr))
 		return NULL;
 
-	page = virt_to_head_page(ptr);
+	/*
+	 * When CONFIG_HIGHMEM=y, kmap_to_page() will give either the
+	 * highmem page or fallback to virt_to_page(). The following
+	 * is effectively a highmem-aware virt_to_head_page().
+	 */
+	page = compound_head(kmap_to_page((void *)ptr));
 
 	/* Check slab allocator for flags and size. */
 	if (PageSlab(page))
diff -druNp --no-dereference linux-libre-4.9.196-gnu/net/wireless/nl80211.c linux-libre-4.9.197-gnu/net/wireless/nl80211.c
--- linux-libre-4.9.196-gnu/net/wireless/nl80211.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/net/wireless/nl80211.c	2019-10-17 16:42:47.000000000 -0400
@@ -213,6 +213,36 @@ cfg80211_get_dev_from_info(struct net *n
 	return __cfg80211_rdev_from_attrs(netns, info->attrs);
 }
 
+static int validate_beacon_head(const struct nlattr *attr)
+{
+	const u8 *data = nla_data(attr);
+	unsigned int len = nla_len(attr);
+	const struct element *elem;
+	const struct ieee80211_mgmt *mgmt = (void *)data;
+	unsigned int fixedlen = offsetof(struct ieee80211_mgmt,
+					 u.beacon.variable);
+
+	if (len < fixedlen)
+		goto err;
+
+	if (ieee80211_hdrlen(mgmt->frame_control) !=
+	    offsetof(struct ieee80211_mgmt, u.beacon))
+		goto err;
+
+	data += fixedlen;
+	len -= fixedlen;
+
+	for_each_element(elem, data, len) {
+		/* nothing */
+	}
+
+	if (for_each_element_completed(elem, data, len))
+		return 0;
+
+err:
+	return -EINVAL;
+}
+
 /* policy for the attributes */
 static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
@@ -2069,6 +2099,8 @@ static int nl80211_parse_chandef(struct
 
 	control_freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
 
+	memset(chandef, 0, sizeof(*chandef));
+
 	chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq);
 	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 	chandef->center_freq1 = control_freq;
@@ -2538,7 +2570,7 @@ static int nl80211_send_iface(struct sk_
 
 	if (rdev->ops->get_channel) {
 		int ret;
-		struct cfg80211_chan_def chandef;
+		struct cfg80211_chan_def chandef = {};
 
 		ret = rdev_get_channel(rdev, wdev, &chandef);
 		if (ret == 0) {
@@ -3678,6 +3710,11 @@ static int nl80211_parse_beacon(struct n
 	memset(bcn, 0, sizeof(*bcn));
 
 	if (attrs[NL80211_ATTR_BEACON_HEAD]) {
+		int ret = validate_beacon_head(attrs[NL80211_ATTR_BEACON_HEAD]);
+
+		if (ret)
+			return ret;
+
 		bcn->head = nla_data(attrs[NL80211_ATTR_BEACON_HEAD]);
 		bcn->head_len = nla_len(attrs[NL80211_ATTR_BEACON_HEAD]);
 		if (!bcn->head_len)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/net/wireless/reg.c linux-libre-4.9.197-gnu/net/wireless/reg.c
--- linux-libre-4.9.196-gnu/net/wireless/reg.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/net/wireless/reg.c	2019-10-17 16:42:47.000000000 -0400
@@ -1564,7 +1564,7 @@ static void reg_call_notifier(struct wip
 
 static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
 {
-	struct cfg80211_chan_def chandef;
+	struct cfg80211_chan_def chandef = {};
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
 	enum nl80211_iftype iftype;
 
diff -druNp --no-dereference linux-libre-4.9.196-gnu/net/wireless/scan.c linux-libre-4.9.197-gnu/net/wireless/scan.c
--- linux-libre-4.9.196-gnu/net/wireless/scan.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/net/wireless/scan.c	2019-10-17 16:42:47.000000000 -0400
@@ -407,6 +407,8 @@ const u8 *cfg80211_find_ie_match(u8 eid,
 				 const u8 *match, int match_len,
 				 int match_offset)
 {
+	const struct element *elem;
+
 	/* match_offset can't be smaller than 2, unless match_len is
 	 * zero, in which case match_offset must be zero as well.
 	 */
@@ -414,14 +416,10 @@ const u8 *cfg80211_find_ie_match(u8 eid,
 		    (!match_len && match_offset)))
 		return NULL;
 
-	while (len >= 2 && len >= ies[1] + 2) {
-		if ((ies[0] == eid) &&
-		    (ies[1] + 2 >= match_offset + match_len) &&
-		    !memcmp(ies + match_offset, match, match_len))
-			return ies;
-
-		len -= ies[1] + 2;
-		ies += ies[1] + 2;
+	for_each_element_id(elem, eid, ies, len) {
+		if (elem->datalen >= match_offset - 2 + match_len &&
+		    !memcmp(elem->data + match_offset - 2, match, match_len))
+			return (void *)elem;
 	}
 
 	return NULL;
diff -druNp --no-dereference linux-libre-4.9.196-gnu/net/wireless/wext-compat.c linux-libre-4.9.197-gnu/net/wireless/wext-compat.c
--- linux-libre-4.9.196-gnu/net/wireless/wext-compat.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/net/wireless/wext-compat.c	2019-10-17 16:42:47.000000000 -0400
@@ -799,7 +799,7 @@ static int cfg80211_wext_giwfreq(struct
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
-	struct cfg80211_chan_def chandef;
+	struct cfg80211_chan_def chandef = {};
 	int ret;
 
 	switch (wdev->iftype) {
diff -druNp --no-dereference linux-libre-4.9.196-gnu/security/integrity/ima/ima_crypto.c linux-libre-4.9.197-gnu/security/integrity/ima/ima_crypto.c
--- linux-libre-4.9.196-gnu/security/integrity/ima/ima_crypto.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/security/integrity/ima/ima_crypto.c	2019-10-17 16:42:47.000000000 -0400
@@ -298,8 +298,11 @@ static int ima_calc_file_hash_atfm(struc
 		rbuf_len = min_t(loff_t, i_size - offset, rbuf_size[active]);
 		rc = integrity_kernel_read(file, offset, rbuf[active],
 					   rbuf_len);
-		if (rc != rbuf_len)
+		if (rc != rbuf_len) {
+			if (rc >= 0)
+				rc = -EINVAL;
 			goto out3;
+		}
 
 		if (rbuf[1] && offset) {
 			/* Using two buffers, and it is not the first
diff -druNp --no-dereference linux-libre-4.9.196-gnu/sound/soc/codecs/sgtl5000.c linux-libre-4.9.197-gnu/sound/soc/codecs/sgtl5000.c
--- linux-libre-4.9.196-gnu/sound/soc/codecs/sgtl5000.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/sound/soc/codecs/sgtl5000.c	2019-10-17 16:42:47.000000000 -0400
@@ -35,6 +35,13 @@
 #define SGTL5000_DAP_REG_OFFSET	0x0100
 #define SGTL5000_MAX_REG_OFFSET	0x013A
 
+/* Delay for the VAG ramp up */
+#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
+/* Delay for the VAG ramp down */
+#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
+
+#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
+
 /* default value of sgtl5000 registers */
 static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_CHIP_DIG_POWER,		0x0000 },
@@ -99,6 +106,13 @@ enum sgtl5000_micbias_resistor {
 	SGTL5000_MICBIAS_8K = 8,
 };
 
+enum {
+	HP_POWER_EVENT,
+	DAC_POWER_EVENT,
+	ADC_POWER_EVENT,
+	LAST_POWER_EVENT = ADC_POWER_EVENT
+};
+
 /* sgtl5000 private structure in codec */
 struct sgtl5000_priv {
 	int sysclk;	/* sysclk rate */
@@ -111,8 +125,117 @@ struct sgtl5000_priv {
 	int revision;
 	u8 micbias_resistor;
 	u8 micbias_voltage;
+	u16 mute_state[LAST_POWER_EVENT + 1];
 };
 
+static inline int hp_sel_input(struct snd_soc_component *component)
+{
+	unsigned int ana_reg = 0;
+
+	snd_soc_component_read(component, SGTL5000_CHIP_ANA_CTRL, &ana_reg);
+
+	return (ana_reg & SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
+}
+
+static inline u16 mute_output(struct snd_soc_component *component,
+			      u16 mute_mask)
+{
+	unsigned int mute_reg = 0;
+
+	snd_soc_component_read(component, SGTL5000_CHIP_ANA_CTRL, &mute_reg);
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+			    mute_mask, mute_mask);
+	return mute_reg;
+}
+
+static inline void restore_output(struct snd_soc_component *component,
+				  u16 mute_mask, u16 mute_reg)
+{
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+		mute_mask, mute_reg);
+}
+
+static void vag_power_on(struct snd_soc_component *component, u32 source)
+{
+	unsigned int ana_reg = 0;
+
+	snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER, &ana_reg);
+
+	if (ana_reg & SGTL5000_VAG_POWERUP)
+		return;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+			    SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+
+	/* When VAG powering on to get local loop from Line-In, the sleep
+	 * is required to avoid loud pop.
+	 */
+	if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
+	    source == HP_POWER_EVENT)
+		msleep(SGTL5000_VAG_POWERUP_DELAY);
+}
+
+static int vag_power_consumers(struct snd_soc_component *component,
+			       u16 ana_pwr_reg, u32 source)
+{
+	int consumers = 0;
+
+	/* count dac/adc consumers unconditional */
+	if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
+		consumers++;
+	if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
+		consumers++;
+
+	/*
+	 * If the event comes from HP and Line-In is selected,
+	 * current action is 'DAC to be powered down'.
+	 * As HP_POWERUP is not set when HP muxed to line-in,
+	 * we need to keep VAG power ON.
+	 */
+	if (source == HP_POWER_EVENT) {
+		if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
+			consumers++;
+	} else {
+		if (ana_pwr_reg & SGTL5000_HP_POWERUP)
+			consumers++;
+	}
+
+	return consumers;
+}
+
+static void vag_power_off(struct snd_soc_component *component, u32 source)
+{
+	unsigned int ana_pwr = SGTL5000_VAG_POWERUP;
+
+	snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER, &ana_pwr);
+
+	if (!(ana_pwr & SGTL5000_VAG_POWERUP))
+		return;
+
+	/*
+	 * This function calls when any of VAG power consumers is disappearing.
+	 * Thus, if there is more than one consumer at the moment, as minimum
+	 * one consumer will definitely stay after the end of the current
+	 * event.
+	 * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
+	 * - LINE_IN (for HP events) / HP (for DAC/ADC events)
+	 * - DAC
+	 * - ADC
+	 * (the current consumer is disappearing right now)
+	 */
+	if (vag_power_consumers(component, ana_pwr, source) >= 2)
+		return;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+		SGTL5000_VAG_POWERUP, 0);
+	/* In power down case, we need wait 400-1000 ms
+	 * when VAG fully ramped down.
+	 * As longer we wait, as smaller pop we've got.
+	 */
+	msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+}
+
 /*
  * mic_bias power on/off share the same register bits with
  * output impedance of mic bias, when power on mic bias, we
@@ -144,36 +267,46 @@ static int mic_bias_event(struct snd_soc
 	return 0;
 }
 
-/*
- * As manual described, ADC/DAC only works when VAG powerup,
- * So enabled VAG before ADC/DAC up.
- * In power down case, we need wait 400ms when vag fully ramped down.
- */
-static int power_vag_event(struct snd_soc_dapm_widget *w,
-	struct snd_kcontrol *kcontrol, int event)
+static int vag_and_mute_control(struct snd_soc_component *component,
+				 int event, int event_source)
 {
-	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
-	const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
+	static const u16 mute_mask[] = {
+		/*
+		 * Mask for HP_POWER_EVENT.
+		 * Muxing Headphones have to be wrapped with mute/unmute
+		 * headphones only.
+		 */
+		SGTL5000_HP_MUTE,
+		/*
+		 * Masks for DAC_POWER_EVENT/ADC_POWER_EVENT.
+		 * Muxing DAC or ADC block have to be wrapped with mute/unmute
+		 * both headphones and line-out.
+		 */
+		SGTL5000_OUTPUTS_MUTE,
+		SGTL5000_OUTPUTS_MUTE
+	};
+
+	struct sgtl5000_priv *sgtl5000 =
+		snd_soc_component_get_drvdata(component);
 
 	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		sgtl5000->mute_state[event_source] =
+			mute_output(component, mute_mask[event_source]);
+		break;
 	case SND_SOC_DAPM_POST_PMU:
-		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
-			SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
-		msleep(400);
+		vag_power_on(component, event_source);
+		restore_output(component, mute_mask[event_source],
+			       sgtl5000->mute_state[event_source]);
 		break;
-
 	case SND_SOC_DAPM_PRE_PMD:
-		/*
-		 * Don't clear VAG_POWERUP, when both DAC and ADC are
-		 * operational to prevent inadvertently starving the
-		 * other one of them.
-		 */
-		if ((snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER) &
-				mask) != mask) {
-			snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
-				SGTL5000_VAG_POWERUP, 0);
-			msleep(400);
-		}
+		sgtl5000->mute_state[event_source] =
+			mute_output(component, mute_mask[event_source]);
+		vag_power_off(component, event_source);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		restore_output(component, mute_mask[event_source],
+			       sgtl5000->mute_state[event_source]);
 		break;
 	default:
 		break;
@@ -182,6 +315,41 @@ static int power_vag_event(struct snd_so
 	return 0;
 }
 
+/*
+ * Mute Headphone when power it up/down.
+ * Control VAG power on HP power path.
+ */
+static int headphone_pga_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, HP_POWER_EVENT);
+}
+
+/* As manual describes, ADC/DAC powering up/down requires
+ * to mute outputs to avoid pops.
+ * Control VAG power on ADC/DAC power path.
+ */
+static int adc_updown_depop(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, ADC_POWER_EVENT);
+}
+
+static int dac_updown_depop(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, DAC_POWER_EVENT);
+}
+
 /* input sources for ADC */
 static const char *adc_mux_text[] = {
 	"MIC_IN", "LINE_IN"
@@ -217,7 +385,10 @@ static const struct snd_soc_dapm_widget
 			    mic_bias_event,
 			    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 
-	SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
+	SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+			   headphone_pga_event,
+			   SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
 	SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
 
 	SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
@@ -233,11 +404,12 @@ static const struct snd_soc_dapm_widget
 				0, SGTL5000_CHIP_DIG_POWER,
 				1, 0),
 
-	SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
-	SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
-
-	SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
-	SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
+	SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
+			   adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
+			   dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
 };
 
 /* routes for sgtl5000 */
diff -druNp --no-dereference linux-libre-4.9.196-gnu/tools/lib/traceevent/event-parse.c linux-libre-4.9.197-gnu/tools/lib/traceevent/event-parse.c
--- linux-libre-4.9.196-gnu/tools/lib/traceevent/event-parse.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/tools/lib/traceevent/event-parse.c	2019-10-17 16:42:47.000000000 -0400
@@ -267,10 +267,10 @@ static int add_new_comm(struct pevent *p
 		errno = ENOMEM;
 		return -1;
 	}
+	pevent->cmdlines = cmdlines;
 
 	cmdlines[pevent->cmdline_count].comm = strdup(comm);
 	if (!cmdlines[pevent->cmdline_count].comm) {
-		free(cmdlines);
 		errno = ENOMEM;
 		return -1;
 	}
@@ -281,7 +281,6 @@ static int add_new_comm(struct pevent *p
 		pevent->cmdline_count++;
 
 	qsort(cmdlines, pevent->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
-	pevent->cmdlines = cmdlines;
 
 	return 0;
 }
diff -druNp --no-dereference linux-libre-4.9.196-gnu/tools/perf/builtin-stat.c linux-libre-4.9.197-gnu/tools/perf/builtin-stat.c
--- linux-libre-4.9.196-gnu/tools/perf/builtin-stat.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/tools/perf/builtin-stat.c	2019-10-17 16:42:47.000000000 -0400
@@ -2564,8 +2564,11 @@ int cmd_stat(int argc, const char **argv
 			fprintf(output, "[ perf stat: executing run #%d ... ]\n",
 				run_idx + 1);
 
+		if (run_idx != 0)
+			perf_evlist__reset_prev_raw_counts(evsel_list);
+
 		status = run_perf_stat(argc, argv);
-		if (forever && status != -1) {
+		if (forever && status != -1 && !interval) {
 			print_counters(NULL, argc, argv);
 			perf_stat__reset_stats();
 		}
diff -druNp --no-dereference linux-libre-4.9.196-gnu/tools/perf/util/header.c linux-libre-4.9.197-gnu/tools/perf/util/header.c
--- linux-libre-4.9.196-gnu/tools/perf/util/header.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/tools/perf/util/header.c	2019-10-17 16:42:47.000000000 -0400
@@ -949,7 +949,7 @@ static int cpu_cache_level__read(struct
 
 	scnprintf(file, PATH_MAX, "%s/shared_cpu_list", path);
 	if (sysfs__read_str(file, &cache->map, &len)) {
-		free(cache->map);
+		free(cache->size);
 		free(cache->type);
 		return -1;
 	}
diff -druNp --no-dereference linux-libre-4.9.196-gnu/tools/perf/util/jitdump.c linux-libre-4.9.197-gnu/tools/perf/util/jitdump.c
--- linux-libre-4.9.196-gnu/tools/perf/util/jitdump.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/tools/perf/util/jitdump.c	2019-10-17 16:42:47.000000000 -0400
@@ -369,7 +369,7 @@ static int jit_repipe_code_load(struct j
 	size_t size;
 	u16 idr_size;
 	const char *sym;
-	uint32_t count;
+	uint64_t count;
 	int ret, csize;
 	pid_t pid, tid;
 	struct {
@@ -391,7 +391,7 @@ static int jit_repipe_code_load(struct j
 		return -1;
 
 	filename = event->mmap2.filename;
-	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%u.so",
+	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%" PRIu64 ".so",
 			jd->dir,
 			pid,
 			count);
@@ -493,7 +493,7 @@ static int jit_repipe_code_move(struct j
 		return -1;
 
 	filename = event->mmap2.filename;
-	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%"PRIu64,
+	size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%" PRIu64 ".so",
 	         jd->dir,
 	         pid,
 		 jr->move.code_index);
diff -druNp --no-dereference linux-libre-4.9.196-gnu/tools/perf/util/llvm-utils.c linux-libre-4.9.197-gnu/tools/perf/util/llvm-utils.c
--- linux-libre-4.9.196-gnu/tools/perf/util/llvm-utils.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/tools/perf/util/llvm-utils.c	2019-10-17 16:42:47.000000000 -0400
@@ -220,14 +220,14 @@ static int detect_kbuild_dir(char **kbui
 	const char *prefix_dir = "";
 	const char *suffix_dir = "";
 
+	/* _UTSNAME_LENGTH is 65 */
+	char release[128];
+
 	char *autoconf_path;
 
 	int err;
 
 	if (!test_dir) {
-		/* _UTSNAME_LENGTH is 65 */
-		char release[128];
-
 		err = fetch_kernel_version(NULL, release,
 					   sizeof(release));
 		if (err)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/tools/perf/util/stat.c linux-libre-4.9.197-gnu/tools/perf/util/stat.c
--- linux-libre-4.9.196-gnu/tools/perf/util/stat.c	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/tools/perf/util/stat.c	2019-10-17 16:42:47.000000000 -0400
@@ -145,6 +145,15 @@ static void perf_evsel__free_prev_raw_co
 	evsel->prev_raw_counts = NULL;
 }
 
+static void perf_evsel__reset_prev_raw_counts(struct perf_evsel *evsel)
+{
+	if (evsel->prev_raw_counts) {
+		evsel->prev_raw_counts->aggr.val = 0;
+		evsel->prev_raw_counts->aggr.ena = 0;
+		evsel->prev_raw_counts->aggr.run = 0;
+       }
+}
+
 static int perf_evsel__alloc_stats(struct perf_evsel *evsel, bool alloc_raw)
 {
 	int ncpus = perf_evsel__nr_cpus(evsel);
@@ -195,6 +204,14 @@ void perf_evlist__reset_stats(struct per
 	}
 }
 
+void perf_evlist__reset_prev_raw_counts(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel;
+
+	evlist__for_each_entry(evlist, evsel)
+		perf_evsel__reset_prev_raw_counts(evsel);
+}
+
 static void zero_per_pkg(struct perf_evsel *counter)
 {
 	if (counter->per_pkg_mask)
diff -druNp --no-dereference linux-libre-4.9.196-gnu/tools/perf/util/stat.h linux-libre-4.9.197-gnu/tools/perf/util/stat.h
--- linux-libre-4.9.196-gnu/tools/perf/util/stat.h	2019-10-07 12:53:25.000000000 -0400
+++ linux-libre-4.9.197-gnu/tools/perf/util/stat.h	2019-10-17 16:42:47.000000000 -0400
@@ -94,6 +94,7 @@ void perf_stat__print_shadow_stats(struc
 int perf_evlist__alloc_stats(struct perf_evlist *evlist, bool alloc_raw);
 void perf_evlist__free_stats(struct perf_evlist *evlist);
 void perf_evlist__reset_stats(struct perf_evlist *evlist);
+void perf_evlist__reset_prev_raw_counts(struct perf_evlist *evlist);
 
 int perf_stat_process_counter(struct perf_stat_config *config,
 			      struct perf_evsel *counter);
