diff --git linux-libre-5.9-gnu/.clang-format linux-libre-5.10-rc7-gnu/.clang-format
index badfc1ba440a..10dc5a9a61b3 100644
--- linux-libre-5.9-gnu/.clang-format
+++ linux-libre-5.10-rc7-gnu/.clang-format
@@ -203,11 +203,13 @@ ForEachMacros:
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
   - 'for_each_member'
-  - 'for_each_memblock'
+  - 'for_each_mem_region'
   - 'for_each_memblock_type'
   - 'for_each_memcg_cache_index'
   - 'for_each_mem_pfn_range'
+  - '__for_each_mem_range'
   - 'for_each_mem_range'
+  - '__for_each_mem_range_rev'
   - 'for_each_mem_range_rev'
   - 'for_each_migratetype_order'
   - 'for_each_msi_entry'
@@ -271,6 +273,7 @@ ForEachMacros:
   - 'for_each_registered_fb'
   - 'for_each_requested_gpio'
   - 'for_each_requested_gpio_in_range'
+  - 'for_each_reserved_mem_range'
   - 'for_each_reserved_mem_region'
   - 'for_each_rtd_codec_dais'
   - 'for_each_rtd_codec_dais_rollback'
@@ -426,6 +429,7 @@ ForEachMacros:
   - 'rbtree_postorder_for_each_entry_safe'
   - 'rdma_for_each_block'
   - 'rdma_for_each_port'
+  - 'rdma_umem_for_each_dma_block'
   - 'resource_list_for_each_entry'
   - 'resource_list_for_each_entry_safe'
   - 'rhl_for_each_entry_rcu'
diff --git linux-libre-5.9-gnu/.gitignore linux-libre-5.10-rc7-gnu/.gitignore
index 162bd2b67bdf..d01cda8e1177 100644
--- linux-libre-5.9-gnu/.gitignore
+++ linux-libre-5.10-rc7-gnu/.gitignore
@@ -152,3 +152,6 @@ x509.genkey
 
 # Clang's compilation database file
 /compile_commands.json
+
+# Documentation toolchain
+sphinx_*/
diff --git linux-libre-5.9-gnu/.mailmap linux-libre-5.10-rc7-gnu/.mailmap
index 0894a8b4ba7d..225546cc8028 100644
--- linux-libre-5.9-gnu/.mailmap
+++ linux-libre-5.10-rc7-gnu/.mailmap
@@ -82,7 +82,10 @@ Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@gmail.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@mips.com>
 <dev.kurt@vandijck-laurijssen.be> <kurt.van.dijck@eia.be>
-Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <[dbaryshkov@gmail.com]>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_baryshkov@mentor.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_eremin@mentor.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <dima@arista.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <d.safonov@partner.samsung.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>
@@ -133,6 +136,7 @@ James Ketrenos <jketreno@io.(none)>
 Jan Glauber <jan.glauber@gmail.com> <jang@de.ibm.com>
 Jan Glauber <jan.glauber@gmail.com> <jang@linux.vnet.ibm.com>
 Jan Glauber <jan.glauber@gmail.com> <jglauber@cavium.com>
+Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@linux.intel.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@nvidia.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
@@ -197,6 +201,7 @@ Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
 Mark Brown <broonie@sirena.org.uk>
+Mark Starovoytov <mstarovo@pm.me> <mstarovoitov@marvell.com>
 Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
@@ -285,6 +290,7 @@ Santosh Shilimkar <ssantosh@kernel.org>
 Sarangdhar Joshi <spjoshi@codeaurora.org>
 Sascha Hauer <s.hauer@pengutronix.de>
 S.Çağlar Onur <caglar@pardus.org.tr>
+Sean Christopherson <seanjc@google.com> <sean.j.christopherson@intel.com>
 Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
 Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
@@ -316,6 +322,8 @@ TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Uwe Kleine-König <ukleinek@strlen.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
diff --git linux-libre-5.9-gnu/CREDITS linux-libre-5.10-rc7-gnu/CREDITS
index 32ee70a7562e..e88d1a783a80 100644
--- linux-libre-5.9-gnu/CREDITS
+++ linux-libre-5.10-rc7-gnu/CREDITS
@@ -98,7 +98,7 @@ N: Erik Andersen
 E: andersen@codepoet.org
 W: https://www.codepoet.org/
 P: 1024D/30D39057 1BC4 2742 E885 E4DE 9301  0C82 5F9B 643E 30D3 9057
-D: Maintainer of ide-cd and Uniform CD-ROM driver, 
+D: Maintainer of ide-cd and Uniform CD-ROM driver,
 D: ATAPI CD-Changer support, Major 2.1.x CD-ROM update.
 S: 352 North 525 East
 S: Springville, Utah 84663
@@ -191,6 +191,10 @@ N: Krishna Balasubramanian
 E: balasub@cis.ohio-state.edu
 D: Wrote SYS V IPC (part of standard kernel since 0.99.10)
 
+B: Robert Baldyga
+E: r.baldyga@hackerion.com
+D: Samsung S3FWRN5 NCI NFC Controller
+
 N: Chris Ball
 E: chris@printf.net
 D: Former maintainer of the MMC/SD/SDIO subsystem.
@@ -259,7 +263,7 @@ N: Paul Barton-Davis
 E: pbd@op.net
 D: Driver for WaveFront soundcards (Turtle Beach Maui, Tropez, Tropez+)
 D: Various bugfixes and changes to sound drivers
-S: USA 
+S: USA
 
 N: Carlos Henrique Bauer
 E: chbauer@acm.org
@@ -736,6 +740,11 @@ S: (ask for current address)
 S: Portland, Oregon
 S: USA
 
+N: Jason Cooper
+D: ARM/Marvell SOC co-maintainer
+D: irqchip co-maintainer
+D: MVEBU PCI DRIVER co-maintainer
+
 N: Robin Cornelius
 E: robincornelius@users.sourceforge.net
 D: Ralink rt2x00 WLAN driver
@@ -845,6 +854,12 @@ D: trivial hack to add variable address length routing to Rose.
 D: AX25-HOWTO, HAM-HOWTO, IPX-HOWTO, NET-2-HOWTO
 D: ax25-utils maintainer.
 
+N: Kamil Debski
+E: kamil@wypas.org
+D: Samsung S5P 2D graphics acceleration and Multi Format Codec drivers
+D: Samsung USB2 phy drivers
+D: PWM fan driver
+
 N: Helge Deller
 E: deller@gmx.de
 W: http://www.parisc-linux.org/
@@ -1195,7 +1210,7 @@ N: Daniel J. Frasnelli
 E: dfrasnel@alphalinux.org
 W: http://www.alphalinux.org/
 P: 1024/3EF87611 B9 F1 44 50 D3 E8 C2 80  DA E5 55 AA 56 7C 42 DA
-D: DEC Alpha hacker 
+D: DEC Alpha hacker
 D: Miscellaneous bug squisher
 
 N: Jim Freeman
@@ -1295,7 +1310,7 @@ S: P.O. Box 76, Epping
 S: New South Wales, 2121
 S: Australia
 
-N: Carlos E. Gorges 
+N: Carlos E. Gorges
 E: carlos@techlinux.com.br
 D: fix smp support on cmpci driver
 P: 2048G/EA3C4B19 FF31 33A6 0362 4915 B7EB  E541 17D0 0379 EA3C 4B19
@@ -1336,7 +1351,7 @@ E: wgreathouse@smva.com
 E: wgreathouse@myfavoritei.com
 D: Current Belkin USB Serial Adapter F5U103 hacker
 D: Kernel hacker, embedded systems
-S: 7802 Fitzwater Road   
+S: 7802 Fitzwater Road
 S: Brecksville, OH  44141-1334
 S: USA
 
@@ -1377,7 +1392,7 @@ N: Grant Guenther
 E: grant@torque.net
 W: http://www.torque.net/linux-pp.html
 D: original author of ppa driver for parallel port ZIP drive
-D: original architect of the parallel-port sharing scheme 
+D: original architect of the parallel-port sharing scheme
 D: PARIDE subsystem: drivers for parallel port IDE & ATAPI devices
 S: 44 St. Joseph Street, Suite 506
 S: Toronto, Ontario, M4Y 2W4
@@ -1519,7 +1534,7 @@ N: Benjamin Herrenschmidt
 E: benh@kernel.crashing.org
 D: Various parts of PPC/PPC64 & PowerMac
 S: 312/107 Canberra Avenue
-S: Griffith, ACT 2603 
+S: Griffith, ACT 2603
 S: Australia
 
 N: Andreas Herrmann
@@ -1821,7 +1836,7 @@ S: Hungary
 N: Bernhard Kaindl
 E: bkaindl@netway.at
 E: edv@bartelt.via.at
-D: Author of a menu based configuration tool, kmenu, which 
+D: Author of a menu based configuration tool, kmenu, which
 D: is the predecessor of 'make menuconfig' and 'make xconfig'.
 D: digiboard driver update(modularisation work and 2.1.x upd)
 S: Tallak 95
@@ -1906,6 +1921,15 @@ S: 660 Harvard Ave. #7
 S: Santa Clara, CA 95051
 S: USA
 
+N: Kukjin Kim
+E: kgene@kernel.org
+D: Samsung S3C, S5P and Exynos ARM architectures
+
+N: Sangbeom Kim
+E: sbkim73@samsung.com
+D: Samsung SoC Audio (ASoC) drivers
+D: Samsung PMIC (RTC, regulators, MFD) drivers
+
 N: Russell King
 E: rmk@arm.linux.org.uk
 D: Linux/arm integrator, maintainer & hacker
@@ -1942,6 +1966,10 @@ S: Post Office Box 611311
 S: San Jose, California 95161-1311
 S: USA
 
+N: Hartmut Knaack
+E: knaack.h@gmx.de
+D: IIO subsystem and drivers
+
 N: Thorsten Knabe
 E: Thorsten Knabe <tek@rbg.informatik.tu-darmstadt.de>
 E: Thorsten Knabe <tek01@hrzpub.tu-darmstadt.de>
@@ -1999,7 +2027,7 @@ W: http://www.xos.nl/
 D: IP transparent proxy support
 S: X/OS Experts in Open Systems BV
 S: Kruislaan 419
-S: 1098 VA Amsterdam 
+S: 1098 VA Amsterdam
 S: The Netherlands
 
 N: Goran Koruga
@@ -2071,7 +2099,7 @@ S: Germany
 
 N: Andrzej M. Krzysztofowicz
 E: ankry@mif.pg.gda.pl
-D: Some 8-bit XT disk driver and devfs hacking 
+D: Some 8-bit XT disk driver and devfs hacking
 D: Aladdin 1533/1543(C) chipset IDE
 D: PIIX chipset IDE
 S: ul. Matemblewska 1B/10
@@ -2446,7 +2474,7 @@ E: mge@EZ-Darmstadt.Telekom.de
 D: Logical Volume Manager
 S: Bartningstr. 12
 S: 64289 Darmstadt
-S: Germany 
+S: Germany
 
 N: Mark W. McClelland
 E: mmcclell@bigfoot.com
@@ -2530,7 +2558,7 @@ E: meskes@debian.org
 P: 1024/04B6E8F5 6C 77 33 CA CC D6 22 03  AB AB 15 A3 AE AD 39 7D
 D: Kernel hacker. PostgreSQL hacker. Software watchdog daemon.
 D: Maintainer of several Debian packages
-S: Th.-Heuss-Str. 61 
+S: Th.-Heuss-Str. 61
 S: D-41812 Erkelenz
 S: Germany
 
@@ -2768,7 +2796,7 @@ E: neuffer@goofy.zdv.uni-mainz.de
 W: http://www.i-Connect.Net/~mike/
 D: Developer and maintainer of the EATA-DMA SCSI driver
 D: Co-developer EATA-PIO SCSI driver
-D: /proc/scsi and assorted other snippets 
+D: /proc/scsi and assorted other snippets
 S: Zum Schiersteiner Grund 2
 S: 55127 Mainz
 S: Germany
@@ -2835,6 +2863,10 @@ D: IPX development and support
 N: Venkatesh Pallipadi (Venki)
 D: x86/HPET
 
+N: Kyungmin Park
+E: kyungmin.park@samsung.com
+D: Samsung S5Pv210 and Exynos4210 mobile platforms
+
 N: David Parsons
 E: orc@pell.chi.il.us
 D: improved memory detection code.
@@ -3002,7 +3034,7 @@ D: Embedded PowerPC 4xx/6xx/7xx/74xx support
 S: Chandler, Arizona 85249
 S: USA
 
-N: Frederic Potter 
+N: Frederic Potter
 E: fpotter@cirpack.com
 D: Some PCI kernel support
 
@@ -3435,21 +3467,21 @@ S: Klosterweg 28 / i309
 S: 76131 Karlsruhe
 S: Germany
 
-N: James Simmons 
+N: James Simmons
 E: jsimmons@infradead.org
-E: jsimmons@users.sf.net 
+E: jsimmons@users.sf.net
 D: Frame buffer device maintainer
 D: input layer development
 D: tty/console layer
-D: various mipsel devices 
-S: 115 Carmel Avenue 
+D: various mipsel devices
+S: 115 Carmel Avenue
 S: El Cerrito CA 94530
-S: USA 
+S: USA
 
 N: Jaspreet Singh
 E: jaspreet@sangoma.com
 W: www.sangoma.com
-D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards 
+D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards
 S: Sangoma Technologies Inc.,
 S: 1001 Denison Street
 S: Suite 101
@@ -3473,7 +3505,7 @@ N: Craig Small
 E: csmall@triode.apana.org.au
 E: vk2xlz@gonzo.vk2xlz.ampr.org (packet radio)
 D: Gracilis PackeTwin device driver
-D: RSPF daemon 
+D: RSPF daemon
 S: 10 Stockalls Place
 S: Minto, NSW, 2566
 S: Australia
@@ -3683,7 +3715,7 @@ N: Tsu-Sheng Tsao
 E: tsusheng@scf.usc.edu
 D: IGMP(Internet Group Management Protocol) version 2
 S: 2F 14 ALY 31 LN 166 SEC 1 SHIH-PEI RD
-S: Taipei 
+S: Taipei
 S: Taiwan 112
 S: Republic of China
 S: 24335 Delta Drive
@@ -3844,7 +3876,7 @@ D: Produced the Slackware distribution, updated the SVGAlib
 D: patches for ghostscript, worked on color 'ls', etc.
 S: 301 15th Street S.
 S: Moorhead, Minnesota 56560
-S: USA 
+S: USA
 
 N: Jos Vos
 E: jos@xos.nl
@@ -3852,7 +3884,7 @@ W: http://www.xos.nl/
 D: Various IP firewall updates, ipfwadm
 S: X/OS Experts in Open Systems BV
 S: Kruislaan 419
-S: 1098 VA Amsterdam 
+S: 1098 VA Amsterdam
 S: The Netherlands
 
 N: Jeroen Vreeken
@@ -4090,7 +4122,7 @@ S: People's Repulic of China
 N: Victor Yodaiken
 E: yodaiken@fsmlabs.com
 D: RTLinux (RealTime Linux)
-S: POB 1822 
+S: POB 1822
 S: Socorro NM, 87801
 S: USA
 
@@ -4188,7 +4220,7 @@ D: EISA/sysfs subsystem
 S: France
 
 # Don't add your name here, unless you really _are_ after Marc
-# alphabetically. Leonard used to be very proud of being the 
+# alphabetically. Leonard used to be very proud of being the
 # last entry, and he'll get positively pissed if he can't even
 # be second-to-last.  (and this file really _is_ supposed to be
 # in alphabetic order)
diff --git linux-libre-5.9-gnu/Documentation/ABI/README linux-libre-5.10-rc7-gnu/Documentation/ABI/README
index 3121029dce21..8bac9cb09a6d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/README
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/README
@@ -32,7 +32,7 @@ The different levels of stability are:
 	layout of the files below for details on how to do this.)
 
   obsolete/
-  	This directory documents interfaces that are still remaining in
+	This directory documents interfaces that are still remaining in
 	the kernel, but are marked to be removed at some later point in
 	time.  The description of the interface will document the reason
 	why it is obsolete and when it can be expected to be removed.
@@ -58,6 +58,14 @@ Users:		All users of this interface who wish to be notified when
 		be changed further.
 
 
+Note:
+   The fields should be use a simple notation, compatible with ReST markup.
+   Also, the file **should not** have a top-level index, like::
+
+	===
+	foo
+	===
+
 How things move between levels:
 
 Interfaces in stable may move to obsolete, as long as the proper
diff --git linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-class-dax linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-class-dax
index 2cb9fc5e8bd1..0faf1354cd05 100644
--- linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-class-dax
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-class-dax
@@ -8,11 +8,11 @@ Description:	Device DAX is the device-centric analogue of Filesystem
 		system.  Device DAX is strict, precise and predictable.
 		Specifically this interface:
 
-		1/ Guarantees fault granularity with respect to a given
-		page size (pte, pmd, or pud) set at configuration time.
+		1. Guarantees fault granularity with respect to a given
+		   page size (pte, pmd, or pud) set at configuration time.
 
-		2/ Enforces deterministic behavior by being strict about
-		what fault scenarios are supported.
+		2. Enforces deterministic behavior by being strict about
+		   what fault scenarios are supported.
 
 		The /sys/class/dax/ interface enumerates all the
 		device-dax instances in the system. The ABI is
diff --git linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
index 5d41ebadf15e..66545c587a64 100644
--- linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
@@ -7,10 +7,13 @@ Description:	It is possible to switch the cpi setting of the mouse with the
 		setting reported by the mouse. This number has to be further
 		processed to receive the real dpi value:
 
+		===== ====
 		VALUE DPI
+		===== ====
 		1     400
 		2     800
 		4     1600
+		===== ====
 
 		This file is readonly.
 		Has never been used. If bookkeeping is done, it's done in userland tools.
diff --git linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-gpio linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-gpio
index e0d4e5e2dd90..b8b0fd341c17 100644
--- linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-gpio
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-gpio
@@ -13,6 +13,8 @@ Description:
   GPIOs are identified as they are inside the kernel, using integers in
   the range 0..INT_MAX.  See Documentation/admin-guide/gpio for more information.
 
+  ::
+
     /sys/class/gpio
 	/export ... asks the kernel to export a GPIO to userspace
 	/unexport ... to return a GPIO to the kernel
diff --git linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
index 49ed9c8fd1e5..ed6b52ca210f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
@@ -15,7 +15,7 @@ Description:
 	actual protection), and Android and Linux distributions have been
 	explicitly writing a "0" to /sys/fs/selinux/checkreqprot during
 	initialization for some time.  Support for setting checkreqprot to 1
-	will be	removed in a future kernel release, at which point the kernel
+	will be	removed no sooner than June 2021, at which point the kernel
 	will always cease using checkreqprot internally and will always
 	check the actual protections being applied upon mmap/mprotect calls.
 	The checkreqprot selinuxfs node will remain for backward compatibility
diff --git linux-libre-5.9-gnu/Documentation/ABI/removed/devfs linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/devfs
index 0020c49933c4..24fb35adf277 100644
--- linux-libre-5.9-gnu/Documentation/ABI/removed/devfs
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/devfs
@@ -5,6 +5,7 @@ Description:
 	devfs has been unmaintained for a number of years, has unfixable
 	races, contains a naming policy within the kernel that is
 	against the LSB, and can be replaced by using udev.
+
 	The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
 	along with the assorted devfs function calls throughout the
 	kernel tree.
diff --git linux-libre-5.9-gnu/Documentation/ABI/removed/raw1394 linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/raw1394
index ec333e676322..9ec7ec493920 100644
--- linux-libre-5.9-gnu/Documentation/ABI/removed/raw1394
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/raw1394
@@ -7,6 +7,7 @@ Description:
 	to implement sensible device security policies, and its low level
 	of abstraction that required userspace clients to duplicate much
 	of the kernel's ieee1394 core functionality.
+
 	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
 	firewire-core.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/removed/sysfs-class-rfkill linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/sysfs-class-rfkill
index 9c08c7f98ffb..f25174eafd55 100644
--- linux-libre-5.9-gnu/Documentation/ABI/removed/sysfs-class-rfkill
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/sysfs-class-rfkill
@@ -10,4 +10,4 @@ Description:	This file was deprecated because there no longer was a way to
 		claim just control over a single rfkill instance.
 		This file was scheduled to be removed in 2012, and was removed
 		in 2016.
-Values: 	0: Kernel handles events
+Values:		0: Kernel handles events
diff --git linux-libre-5.9-gnu/Documentation/ABI/removed/video1394 linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/video1394
index c39c25aee77b..1905d35a6619 100644
--- linux-libre-5.9-gnu/Documentation/ABI/removed/video1394
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/removed/video1394
@@ -8,6 +8,7 @@ Description:
 	performance issues in its first generation.  Any video1394 user had
 	to use raw1394 + libraw1394 too because video1394 did not provide
 	asynchronous I/O for device discovery and configuration.
+
 	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
 	firewire-core.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/firewire-cdev linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/firewire-cdev
index f72ed653878a..261f85b13154 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/firewire-cdev
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/firewire-cdev
@@ -14,13 +14,17 @@ Description:
 		Each /dev/fw* is associated with one IEEE 1394 node, which can
 		be remote or local nodes.  Operations on a /dev/fw* file have
 		different scope:
+
 		  - The 1394 node which is associated with the file:
+
 			  - Asynchronous request transmission
 			  - Get the Configuration ROM
 			  - Query node ID
 			  - Query maximum speed of the path between this node
 			    and local node
+
 		  - The 1394 bus (i.e. "card") to which the node is attached to:
+
 			  - Isochronous stream transmission and reception
 			  - Asynchronous stream transmission and reception
 			  - Asynchronous broadcast request transmission
@@ -31,7 +35,9 @@ Description:
 			    manager
 			  - Query cycle time
 			  - Bus reset initiation, bus reset event reception
+
 		  - All 1394 buses:
+
 			  - Allocation of IEEE 1212 address ranges on the local
 			    link layers, reception of inbound requests to such
 			    an address range, asynchronous response transmission
@@ -43,6 +49,7 @@ Description:
 		userland implement different access permission models, some
 		operations are restricted to /dev/fw* files that are associated
 		with a local node:
+
 			  - Addition of descriptors or directories to the local
 			    nodes' Configuration ROM
 			  - PHY packet transmission and reception
@@ -55,50 +62,50 @@ Description:
 		The following file operations are supported:
 
 		open(2)
-		Currently the only useful flags are O_RDWR.
+		    Currently the only useful flags are O_RDWR.
 
 		ioctl(2)
-		Initiate various actions.  Some take immediate effect, others
-		are performed asynchronously while or after the ioctl returns.
-		See the inline documentation in <linux/firewire-cdev.h> for
-		descriptions of all ioctls.
+		    Initiate various actions.  Some take immediate effect, others
+		    are performed asynchronously while or after the ioctl returns.
+		    See the inline documentation in <linux/firewire-cdev.h> for
+		    descriptions of all ioctls.
 
 		poll(2), select(2), epoll_wait(2) etc.
-		Watch for events to become available to be read.
+		    Watch for events to become available to be read.
 
 		read(2)
-		Receive various events.  There are solicited events like
-		outbound asynchronous transaction completion or isochronous
-		buffer completion, and unsolicited events such as bus resets,
-		request reception, or PHY packet reception.  Always use a read
-		buffer which is large enough to receive the largest event that
-		could ever arrive.  See <linux/firewire-cdev.h> for descriptions
-		of all event types and for which ioctls affect reception of
-		events.
+		    Receive various events.  There are solicited events like
+		    outbound asynchronous transaction completion or isochronous
+		    buffer completion, and unsolicited events such as bus resets,
+		    request reception, or PHY packet reception.  Always use a read
+		    buffer which is large enough to receive the largest event that
+		    could ever arrive.  See <linux/firewire-cdev.h> for descriptions
+		    of all event types and for which ioctls affect reception of
+		    events.
 
 		mmap(2)
-		Allocate a DMA buffer for isochronous reception or transmission
-		and map it into the process address space.  The arguments should
-		be used as follows:  addr = NULL, length = the desired buffer
-		size, i.e. number of packets times size of largest packet,
-		prot = at least PROT_READ for reception and at least PROT_WRITE
-		for transmission, flags = MAP_SHARED, fd = the handle to the
-		/dev/fw*, offset = 0.
+		    Allocate a DMA buffer for isochronous reception or transmission
+		    and map it into the process address space.  The arguments should
+		    be used as follows:  addr = NULL, length = the desired buffer
+		    size, i.e. number of packets times size of largest packet,
+		    prot = at least PROT_READ for reception and at least PROT_WRITE
+		    for transmission, flags = MAP_SHARED, fd = the handle to the
+		    /dev/fw*, offset = 0.
 
 		Isochronous reception works in packet-per-buffer fashion except
 		for multichannel reception which works in buffer-fill mode.
 
 		munmap(2)
-		Unmap the isochronous I/O buffer from the process address space.
+		    Unmap the isochronous I/O buffer from the process address space.
 
 		close(2)
-		Besides stopping and freeing I/O contexts that were associated
-		with the file descriptor, back out any changes to the local
-		nodes' Configuration ROM.  Deallocate isochronous channels and
-		bandwidth at the IRM that were marked for kernel-assisted
-		re- and deallocation.
-
-Users:		libraw1394
-		libdc1394
-		libhinawa
+		    Besides stopping and freeing I/O contexts that were associated
+		    with the file descriptor, back out any changes to the local
+		    nodes' Configuration ROM.  Deallocate isochronous channels and
+		    bandwidth at the IRM that were marked for kernel-assisted
+		    re- and deallocation.
+
+Users:		libraw1394;
+		libdc1394;
+		libhinawa;
 		tools like linux-firewire-utils, fwhack, ...
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-acpi-pmprofile linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-acpi-pmprofile
index 964c7a8afb26..2d6314f0e4e4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-acpi-pmprofile
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -1,22 +1,26 @@
-What: 		/sys/firmware/acpi/pm_profile
+What:		/sys/firmware/acpi/pm_profile
 Date:		03-Nov-2011
 KernelVersion:	v3.2
 Contact:	linux-acpi@vger.kernel.org
-Description: 	The ACPI pm_profile sysfs interface exports the platform
+Description:	The ACPI pm_profile sysfs interface exports the platform
 		power management (and performance) requirement expectations
 		as provided by BIOS. The integer value is directly passed as
 		retrieved from the FADT ACPI table.
-Values:         For possible values see ACPI specification:
+
+Values:	        For possible values see ACPI specification:
 		5.2.9 Fixed ACPI Description Table (FADT)
 		Field: Preferred_PM_Profile
 
 		Currently these values are defined by spec:
-		0 Unspecified
-		1 Desktop
-		2 Mobile
-		3 Workstation
-		4 Enterprise Server
-		5 SOHO Server
-		6 Appliance PC
-		7 Performance Server
+
+		== =================
+		0  Unspecified
+		1  Desktop
+		2  Mobile
+		3  Workstation
+		4  Enterprise Server
+		5  SOHO Server
+		6  Appliance PC
+		7  Performance Server
 		>7 Reserved
+		== =================
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-firewire linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-firewire
index 41e5a0cd1e3e..9ac9eddb82ef 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-firewire
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-firewire
@@ -47,6 +47,7 @@ Description:
 		IEEE 1394 node device attribute.
 		Read-only and immutable.
 Values:		1: The sysfs entry represents a local node (a controller card).
+
 		0: The sysfs entry represents a remote node.
 
 
@@ -125,7 +126,9 @@ Description:
 		Read-only attribute, immutable during the target's lifetime.
 		Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
 		Colon-separated hexadecimal string representations of
+
 			u64 EUI-64 : u24 directory_ID : u16 LUN
+
 		without 0x prefixes, without whitespace.  The former sbp2 driver
 		(removed in 2.6.37 after being superseded by firewire-sbp2) used
 		a somewhat shorter format which was not as close to SAM.
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-mhi linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-mhi
new file mode 100644
index 000000000000..ecfe7662f8d0
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-mhi
@@ -0,0 +1,21 @@
+What:		/sys/bus/mhi/devices/.../serialnumber
+Date:		Sept 2020
+KernelVersion:	5.10
+Contact:	Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description:	The file holds the serial number of the client device obtained
+		using a BHI (Boot Host Interface) register read after at least
+		one attempt to power up the device has been done. If read
+		without having the device power on at least once, the file will
+		read all 0's.
+Users:		Any userspace application or clients interested in device info.
+
+What:		/sys/bus/mhi/devices/.../oem_pk_hash
+Date:		Sept 2020
+KernelVersion:	5.10
+Contact:	Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description:	The file holds the OEM PK Hash value of the endpoint device
+		obtained using a BHI (Boot Host Interface) register read after
+		at least one attempt to power up the device has been done. If
+		read without having the device power on at least once, the file
+		will read all 0's.
+Users:		Any userspace application or clients interested in device info.
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-nvmem linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-nvmem
index 9ffba8576f7b..c399323f37de 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-nvmem
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -9,13 +9,14 @@ Description:
 		Note: This file is only present if CONFIG_NVMEM_SYSFS
 		is enabled
 
-		ex:
-		hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+		ex::
 
-		0000000 0000 0000 0000 0000 0000 0000 0000 0000
-		*
-		00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
-		0000000 0000 0000 0000 0000 0000 0000 0000 0000
-		...
-		*
-		0001000
+		  hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+		  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		  *
+		  00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+		  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		  ...
+		  *
+		  0001000
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-usb linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-usb
index b832eeff9999..cad4bc232520 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-usb
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-usb
@@ -50,8 +50,10 @@ Description:
 
 		Tools can use this file and the connected_duration file to
 		compute the percentage of time that a device has been active.
-		For example,
-		echo $((100 * `cat active_duration` / `cat connected_duration`))
+		For example::
+
+		  echo $((100 * `cat active_duration` / `cat connected_duration`))
+
 		will give an integer percentage.  Note that this does not
 		account for counter wrap.
 Users:
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-vmbus linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-vmbus
index 8e8d167eca31..c27b7b89477c 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-vmbus
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -63,13 +63,6 @@ Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	VCPU (sub)channel is affinitized to
 Users:		tools/hv/lsvmbus and other debugging tools
 
-What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
-Date:		September. 2017
-KernelVersion:	4.14
-Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	VCPU (sub)channel is affinitized to
-Users:		tools/hv/lsvmbus and other debugging tools
-
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/in_mask
 Date:		September. 2017
 KernelVersion:	4.14
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-w1 linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-w1
index 992dfb183ed0..5cd5e872bcae 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-bus-w1
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-bus-w1
@@ -6,6 +6,7 @@ Description:	Bus scanning interval, microseconds component.
 		control systems are attached/generate presence for as short as
 		100 ms - hence the tens-to-hundreds milliseconds scan intervals
 		are required.
+
 		see Documentation/w1/w1-generic.rst for detailed information.
 Users:		any user space application which wants to know bus scanning
 		interval
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-backlight linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-backlight
index 70302f370e7e..023fb52645f8 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-backlight
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-backlight
@@ -4,6 +4,7 @@ KernelVersion:	2.6.12
 Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
 		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+
 		 - FB_BLANK_UNBLANK (0)   : power on.
 		 - FB_BLANK_POWERDOWN (4) : power off
 Users:		HAL
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-infiniband linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-infiniband
index 96dfe1926b76..348c4ac803ad 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-infiniband
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-infiniband
@@ -8,12 +8,14 @@ Date:		Apr, 2005
 KernelVersion:	v2.6.12
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ===========================================
 		node_type:	(RO) Node type (CA, RNIC, usNIC, usNIC UDP,
 				switch or router)
 
 		node_guid:	(RO) Node GUID
 
 		sys_image_guid:	(RO) System image GUID
+		=============== ===========================================
 
 
 What:		/sys/class/infiniband/<device>/node_desc
@@ -47,6 +49,7 @@ KernelVersion:	v2.6.12
 Contact:	linux-rdma@vger.kernel.org
 Description:
 
+		=============== ===============================================
 		lid:		(RO) Port LID
 
 		rate:		(RO) Port data rate (active width * active
@@ -66,8 +69,9 @@ Description:
 
 		cap_mask:	(RO) Port capability mask. 2 bits here are
 				settable- IsCommunicationManagementSupported
-				(set when CM module is loaded) and IsSM (set via
-				open of issmN file).
+				(set when CM module is loaded) and IsSM (set
+				via open of issmN file).
+		=============== ===============================================
 
 
 What:		/sys/class/infiniband/<device>/ports/<port-num>/link_layer
@@ -103,8 +107,7 @@ Date:		Apr, 2005
 KernelVersion:	v2.6.12
 Contact:	linux-rdma@vger.kernel.org
 Description:
-		Errors info:
-		-----------
+		**Errors info**:
 
 		symbol_error: (RO) Total number of minor link errors detected on
 		one or more physical lanes.
@@ -142,8 +145,7 @@ Description:
 		intervention. It can also indicate hardware issues or extremely
 		poor link signal integrity
 
-		Data info:
-		---------
+		**Data info**:
 
 		port_xmit_data: (RO) Total number of data octets, divided by 4
 		(lanes), transmitted on all VLs. This is 64 bit counter
@@ -176,8 +178,7 @@ Description:
 		transmitted on all VLs from the port. This may include multicast
 		packets with errors.
 
-		Misc info:
-		---------
+		**Misc info**:
 
 		port_xmit_discards: (RO) Total number of outbound packets
 		discarded by the port because the port is down or congested.
@@ -244,9 +245,11 @@ Description:
 		two umad devices and two issm devices, while a switch will have
 		one device of each type (for switch port 0).
 
+		======= =====================================
 		ibdev:	(RO) Show Infiniband (IB) device name
 
 		port:	(RO) Display port number
+		======= =====================================
 
 
 What:		/sys/class/infiniband_mad/abi_version
@@ -258,33 +261,18 @@ Description:
 		userspace ABI compatibility of umad & issm devices.
 
 
-What:		/sys/class/infiniband_cm/ucmN/ibdev
-Date:		Oct, 2005
-KernelVersion:	v2.6.14
-Contact:	linux-rdma@vger.kernel.org
-Description:
-		(RO) Display Infiniband (IB) device name
-
-
-What:		/sys/class/infiniband_cm/abi_version
-Date:		Oct, 2005
-KernelVersion:	v2.6.14
-Contact:	linux-rdma@vger.kernel.org
-Description:
-		(RO) Value is incremented if any changes are made that break
-		userspace ABI compatibility of ucm devices.
-
-
 What:		/sys/class/infiniband_verbs/uverbsN/ibdev
 What:		/sys/class/infiniband_verbs/uverbsN/abi_version
 Date:		Sept, 2005
 KernelVersion:	v2.6.14
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ===========================================
 		ibdev:		(RO) Display Infiniband (IB) device name
 
 		abi_version:	(RO) Show ABI version of IB device specific
 				interfaces.
+		=============== ===========================================
 
 
 What:		/sys/class/infiniband_verbs/abi_version
@@ -306,12 +294,14 @@ Date:		Apr, 2005
 KernelVersion:	v2.6.12
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ================================================
 		hw_rev:		(RO) Hardware revision number
 
 		hca_type:	(RO) Host Channel Adapter type: MT23108, MT25208
 				(MT23108 compat mode), MT25208 or MT25204
 
 		board_id:	(RO) Manufacturing board ID
+		=============== ================================================
 
 
 sysfs interface for Mellanox ConnectX HCA IB driver (mlx4)
@@ -324,11 +314,13 @@ Date:		Sep, 2007
 KernelVersion:	v2.6.24
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ===============================
 		hw_rev:		(RO) Hardware revision number
 
 		hca_type:	(RO) Host channel adapter type
 
 		board_id:	(RO) Manufacturing board ID
+		=============== ===============================
 
 
 What:		/sys/class/infiniband/mlx4_X/iov/ports/<port-num>/gids/<n>
@@ -354,6 +346,7 @@ Description:
 		example, ports/1/pkeys/10 contains the value at index 10 in port
 		1's P_Key table.
 
+		======================= ==========================================
 		gids/<n>:		(RO) The physical port gids n = 0..127
 
 		admin_guids/<n>:	(RW) Allows examining or changing the
@@ -382,6 +375,7 @@ Description:
 					guest, whenever it uses its pkey index
 					1, will actually be using the real pkey
 					index 10.
+		======================= ==========================================
 
 
 What:		/sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/smi_enabled
@@ -393,12 +387,14 @@ Description:
 		Enabling QP0 on VFs for selected VF/port. By default, no VFs are
 		enabled for QP0 operation.
 
-		smi_enabled:	(RO) Indicates whether smi is currently enabled
-				for the indicated VF/port
+		================= ==== ===========================================
+		smi_enabled:	  (RO) Indicates whether smi is currently enabled
+				       for the indicated VF/port
 
-		enable_smi_admin:(RW) Used by the admin to request that smi
-				capability be enabled or disabled for the
-				indicated VF/port. 0 = disable, 1 = enable.
+		enable_smi_admin: (RW) Used by the admin to request that smi
+				       capability be enabled or disabled for the
+				       indicated VF/port. 0 = disable, 1 = enable.
+		================= ==== ===========================================
 
 		The requested enablement will occur at the next reset of the VF
 		(e.g. driver restart on the VM which owns the VF).
@@ -415,6 +411,7 @@ KernelVersion:	v2.6.35
 Contact:	linux-rdma@vger.kernel.org
 Description:
 
+		=============== =============================================
 		hw_rev:		(RO) Hardware revision number
 
 		hca_type:	(RO) Driver short name. Should normally match
@@ -423,6 +420,7 @@ Description:
 
 		board_id:	(RO) Manufacturing board id. (Vendor + device
 				information)
+		=============== =============================================
 
 
 sysfs interface for Intel IB driver qib
@@ -443,6 +441,7 @@ Date:		May, 2010
 KernelVersion:	v2.6.35
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ======================================================
 		version:	(RO) Display version information of installed software
 				and drivers.
 
@@ -469,6 +468,7 @@ Description:
 		chip_reset:	(WO) Reset the chip if possible by writing
 				"reset" to this file. Only allowed if no user
 				contexts are open that use chip resources.
+		=============== ======================================================
 
 
 What:		/sys/class/infiniband/qibX/ports/N/sl2vl/[0-15]
@@ -488,14 +488,16 @@ Contact:	linux-rdma@vger.kernel.org
 Description:
 		Per-port congestion control. Both are binary attributes.
 
-		cc_table_bin:	(RO) Congestion control table size followed by
+		=============== ================================================
+		cc_table_bin	(RO) Congestion control table size followed by
 				table entries.
 
-		cc_settings_bin:(RO) Congestion settings: port control, control
+		cc_settings_bin (RO) Congestion settings: port control, control
 				map and an array of 16 entries for the
 				congestion entries - increase, timer, event log
 				trigger threshold and the minimum injection rate
 				delay.
+		=============== ================================================
 
 What:		/sys/class/infiniband/qibX/ports/N/linkstate/loopback
 What:		/sys/class/infiniband/qibX/ports/N/linkstate/led_override
@@ -508,6 +510,7 @@ Contact:	linux-rdma@vger.kernel.org
 Description:
 		[to be documented]
 
+		=============== ===============================================
 		loopback:	(WO)
 		led_override:	(WO)
 		hrtbt_enable:	(RW)
@@ -518,6 +521,7 @@ Description:
 				errors. Possible states are- "Initted",
 				"Present", "IB_link_up", "IB_configured" or
 				"Fatal_Hardware_Error".
+		=============== ===============================================
 
 What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rc_resends
 What:		/sys/class/infiniband/qibX/ports/N/diag_counters/seq_naks
@@ -566,6 +570,7 @@ Contact:	Christian Benvenuti <benve@cisco.com>,
 		linux-rdma@vger.kernel.org
 Description:
 
+		=============== ===============================================
 		board_id:	(RO) Manufacturing board id
 
 		config:		(RO) Report the configuration for this PF
@@ -578,6 +583,7 @@ Description:
 
 		iface:		(RO) Shows which network interface this usNIC
 				entry is associated to (visible with ifconfig).
+		=============== ===============================================
 
 What:		/sys/class/infiniband/usnic_X/qpn/summary
 What:		/sys/class/infiniband/usnic_X/qpn/context
@@ -622,6 +628,7 @@ Date:		May, 2016
 KernelVersion:	v4.6
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== =============================================
 		hw_rev:		(RO) Hardware revision number
 
 		board_id:	(RO) Manufacturing board id
@@ -640,6 +647,7 @@ Description:
 				available.
 
 		tempsense:	(RO) Thermal sense information
+		=============== =============================================
 
 
 What:		/sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_settings_bin
@@ -651,19 +659,21 @@ Contact:	linux-rdma@vger.kernel.org
 Description:
 		Per-port congestion control.
 
-		cc_table_bin:	(RO) CCA tables used by PSM2 Congestion control
+		=============== ================================================
+		cc_table_bin	(RO) CCA tables used by PSM2 Congestion control
 				table size followed by table entries. Binary
 				attribute.
 
-		cc_settings_bin:(RO) Congestion settings: port control, control
+		cc_settings_bin (RO) Congestion settings: port control, control
 				map and an array of 16 entries for the
 				congestion entries - increase, timer, event log
 				trigger threshold and the minimum injection rate
 				delay. Binary attribute.
 
-		cc_prescan:	(RW) enable prescanning for faster BECN
+		cc_prescan	(RW) enable prescanning for faster BECN
 				response. Write "on" to enable and "off" to
 				disable.
+		=============== ================================================
 
 What:		/sys/class/infiniband/hfi1_X/ports/N/sc2vl/[0-31]
 What:		/sys/class/infiniband/hfi1_X/ports/N/sl2sc/[0-31]
@@ -672,11 +682,13 @@ Date:		May, 2016
 KernelVersion:	v4.6
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ===================================================
 		sc2vl/:		(RO) 32 files (0 - 31) used to translate sl->vl
 
 		sl2sc/:		(RO) 32 files (0 - 31) used to translate sl->sc
 
 		vl2mtu/:	(RO) 16 files (0 - 15) used to determine MTU for vl
+		=============== ===================================================
 
 
 What:		/sys/class/infiniband/hfi1_X/sdma_N/cpu_list
@@ -687,26 +699,28 @@ Contact:	linux-rdma@vger.kernel.org
 Description:
 		sdma<N>/ contains one directory per sdma engine (0 - 15)
 
+		=============== ==============================================
 		cpu_list:	(RW) List of cpus for user-process to sdma
 				engine assignment.
 
 		vl:		(RO) Displays the virtual lane (vl) the sdma
 				engine maps to.
+		=============== ==============================================
 
 		This interface gives the user control on the affinity settings
 		for the device. As an example, to set an sdma engine irq
 		affinity and thread affinity of a user processes to use the
 		sdma engine, which is "near" in terms of NUMA configuration, or
-		physical cpu location, the user will do:
+		physical cpu location, the user will do::
 
-		echo "3" > /proc/irq/<N>/smp_affinity_list
-		echo "4-7" > /sys/devices/.../sdma3/cpu_list
-		cat /sys/devices/.../sdma3/vl
-		0
-		echo "8" > /proc/irq/<M>/smp_affinity_list
-		echo "9-12" > /sys/devices/.../sdma4/cpu_list
-		cat /sys/devices/.../sdma4/vl
-		1
+		  echo "3" > /proc/irq/<N>/smp_affinity_list
+		  echo "4-7" > /sys/devices/.../sdma3/cpu_list
+		  cat /sys/devices/.../sdma3/vl
+		  0
+		  echo "8" > /proc/irq/<M>/smp_affinity_list
+		  echo "9-12" > /sys/devices/.../sdma4/cpu_list
+		  cat /sys/devices/.../sdma4/vl
+		  1
 
 		to make sure that when a process runs on cpus 4,5,6, or 7, and
 		uses vl=0, then sdma engine 3 is selected by the driver, and
@@ -728,11 +742,13 @@ Date:		Jan, 2016
 KernelVersion:	v4.10
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ==== ========================
 		hw_rev:		(RO) Hardware revision number
 
 		hca_type:	(RO) Show HCA type (I40IW)
 
 		board_id:	(RO) I40IW board ID
+		=============== ==== ========================
 
 
 sysfs interface for QLogic qedr NIC Driver
@@ -745,9 +761,11 @@ KernelVersion:	v4.10
 Contact:	linux-rdma@vger.kernel.org
 Description:
 
+		=============== ==== ========================
 		hw_rev:		(RO) Hardware revision number
 
 		hca_type:	(RO) Display HCA type
+		=============== ==== ========================
 
 
 sysfs interface for VMware Paravirtual RDMA driver
@@ -761,11 +779,13 @@ KernelVersion:	v4.10
 Contact:	linux-rdma@vger.kernel.org
 Description:
 
+		=============== ==== =====================================
 		hw_rev:		(RO) Hardware revision number
 
 		hca_type:	(RO) Host channel adapter type
 
 		board_id:	(RO) Display PVRDMA manufacturing board ID
+		=============== ==== =====================================
 
 
 sysfs interface for Broadcom NetXtreme-E RoCE driver
@@ -777,6 +797,8 @@ Date:		Feb, 2017
 KernelVersion:	v4.11
 Contact:	linux-rdma@vger.kernel.org
 Description:
+		=============== ==== =========================
 		hw_rev:		(RO) Hardware revision number
 
 		hca_type:	(RO) Host channel adapter type
+		=============== ==== =========================
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-rfkill linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-rfkill
index 5b154f922643..037979f7dc4b 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-rfkill
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-rfkill
@@ -2,7 +2,7 @@ rfkill - radio frequency (RF) connector kill switch support
 
 For details to this subsystem look at Documentation/driver-api/rfkill.rst.
 
-For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+For the deprecated ``/sys/class/rfkill/*/claim`` knobs of this interface look in
 Documentation/ABI/removed/sysfs-class-rfkill.
 
 What: 		/sys/class/rfkill
@@ -36,9 +36,10 @@ KernelVersion	v2.6.22
 Contact:	linux-wireless@vger.kernel.org
 Description: 	Whether the soft blocked state is initialised from non-volatile
 		storage at startup.
-Values: 	A numeric value.
-		0: false
-		1: true
+Values: 	A numeric value:
+
+		- 0: false
+		- 1: true
 
 
 What:		/sys/class/rfkill/rfkill[0-9]+/state
@@ -54,6 +55,7 @@ Description: 	Current state of the transmitter.
 		through this interface. There will likely be another attempt to
 		remove it in the future.
 Values: 	A numeric value.
+
 		0: RFKILL_STATE_SOFT_BLOCKED
 			transmitter is turned off by software
 		1: RFKILL_STATE_UNBLOCKED
@@ -69,6 +71,7 @@ KernelVersion	v2.6.34
 Contact:	linux-wireless@vger.kernel.org
 Description: 	Current hardblock state. This file is read only.
 Values: 	A numeric value.
+
 		0: inactive
 			The transmitter is (potentially) active.
 		1: active
@@ -82,7 +85,9 @@ KernelVersion	v2.6.34
 Contact:	linux-wireless@vger.kernel.org
 Description:	Current softblock state. This file is read and write.
 Values: 	A numeric value.
+
 		0: inactive
 			The transmitter is (potentially) active.
+
 		1: active
 			The transmitter is turned off by software.
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-tpm linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-tpm
index 58e94e7d55be..91ca63ec7581 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-class-tpm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-class-tpm
@@ -32,11 +32,11 @@ KernelVersion:	2.6.12
 Contact:	linux-integrity@vger.kernel.org
 Description:	The "caps" property contains TPM manufacturer and version info.
 
-		Example output:
+		Example output::
 
-		Manufacturer: 0x53544d20
-		TCG version: 1.2
-		Firmware version: 8.16
+		  Manufacturer: 0x53544d20
+		  TCG version: 1.2
+		  Firmware version: 8.16
 
 		Manufacturer is a hex dump of the 4 byte manufacturer info
 		space in a TPM. TCG version shows the TCG TPM spec level that
@@ -54,9 +54,9 @@ Description:	The "durations" property shows the 3 vendor-specific values
 		any longer than necessary before starting to poll for a
 		result.
 
-		Example output:
+		Example output::
 
-		3015000 4508000 180995000 [original]
+		  3015000 4508000 180995000 [original]
 
 		Here the short, medium and long durations are displayed in
 		usecs. "[original]" indicates that the values are displayed
@@ -92,14 +92,14 @@ Description:	The "pcrs" property will dump the current value of all Platform
 		values may be constantly changing, the output is only valid
 		for a snapshot in time.
 
-		Example output:
+		Example output::
 
-		PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		...
+		  PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  ...
 
 		The number of PCRs and hex bytes needed to represent a PCR
 		value will vary depending on TPM chip version. For TPM 1.1 and
@@ -119,44 +119,44 @@ Description:	The "pubek" property will return the TPM's public endorsement
 		ated at TPM manufacture time and exists for the life of the
 		chip.
 
-		Example output:
-
-		Algorithm: 00 00 00 01
-		Encscheme: 00 03
-		Sigscheme: 00 01
-		Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
-		Modulus length: 256
-		Modulus:
-		B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
-		3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
-		1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
-		86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
-		D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
-		82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
-		0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
-		1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
-		6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
-		A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
-		47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
-		10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
-		E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
-		F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
-		F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
-		C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
-
-		Possible values:
-
-		Algorithm:	TPM_ALG_RSA			(1)
-		Encscheme:	TPM_ES_RSAESPKCSv15		(2)
+		Example output::
+
+		  Algorithm: 00 00 00 01
+		  Encscheme: 00 03
+		  Sigscheme: 00 01
+		  Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+		  Modulus length: 256
+		  Modulus:
+		  B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+		  3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+		  1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+		  86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+		  D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+		  82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+		  0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+		  1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+		  6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+		  A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+		  47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+		  10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+		  E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+		  F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+		  F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+		  C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+		Possible values::
+
+		  Algorithm:	TPM_ALG_RSA			(1)
+		  Encscheme:	TPM_ES_RSAESPKCSv15		(2)
 				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
-		Sigscheme:	TPM_SS_NONE			(1)
-		Parameters, a byte string of 3 u32 values:
+		  Sigscheme:	TPM_SS_NONE			(1)
+		  Parameters, a byte string of 3 u32 values:
 			Key Length (bits):	00 00 08 00	(2048)
 			Num primes:		00 00 00 02	(2)
 			Exponent Size:		00 00 00 00	(0 means the
 								 default exp)
-		Modulus Length: 256 (bytes)
-		Modulus:	The 256 byte Endorsement Key modulus
+		  Modulus Length: 256 (bytes)
+		  Modulus:	The 256 byte Endorsement Key modulus
 
 What:		/sys/class/tpm/tpmX/device/temp_deactivated
 Date:		April 2006
@@ -176,9 +176,9 @@ Description:	The "timeouts" property shows the 4 vendor-specific values
 		timeouts is defined by the TPM interface spec that the chip
 		conforms to.
 
-		Example output:
+		Example output::
 
-		750000 750000 750000 750000 [original]
+		  750000 750000 750000 750000 [original]
 
 		The four timeout values are shown in usecs, with a trailing
 		"[original]" or "[adjusted]" depending on whether the values
@@ -191,6 +191,6 @@ Contact:	linux-integrity@vger.kernel.org
 Description:	The "tpm_version_major" property shows the TCG spec major version
 		implemented by the TPM device.
 
-		Example output:
+		Example output::
 
-		2
+		  2
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-devices linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-devices
index 4404bd9b96c1..42bf1eab5677 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-devices
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-devices
@@ -1,5 +1,6 @@
-# Note: This documents additional properties of any device beyond what
-# is documented in Documentation/admin-guide/sysfs-rules.rst
+Note:
+  This documents additional properties of any device beyond what
+  is documented in Documentation/admin-guide/sysfs-rules.rst
 
 What:		/sys/devices/*/of_node
 Date:		February 2015
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
index 1af9c4175213..b44183880935 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -116,6 +116,12 @@ Description:    The maximum number of bandwidth tokens that may be in use at
 		one time by operations that access low bandwidth memory in the
 		device.
 
+What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The last executed device administrative command's status/error.
+
 What:           /sys/bus/dsa/devices/wq<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
@@ -170,6 +176,20 @@ Contact:        dmaengine@vger.kernel.org
 Description:    The number of entries in this work queue that may be filled
 		via a limited portal.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/max_transfer_size
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The max transfer sized for this workqueue. Cannot exceed device
+		max transfer size. Configurable parameter.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/max_batch_size
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The max batch size for this workqueue. Cannot exceed device
+		max batch size. Configurable parameter.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-dma-ioatdma linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
index 420c1d09e42f..3a4e2cd0ddcc 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
@@ -1,29 +1,29 @@
-What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
 Date:           December 3, 2009
 KernelVersion:  2.6.32
 Contact:        dmaengine@vger.kernel.org
 Description:	Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
 		DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
 
-What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
 Date:           December 3, 2009
 KernelVersion:  2.6.32
 Contact:        dmaengine@vger.kernel.org
 Description:	The number of descriptors active in the ring.
 
-What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
 Date:           December 3, 2009
 KernelVersion:  2.6.32
 Contact:        dmaengine@vger.kernel.org
 Description:	Descriptor ring size, total number of descriptors available.
 
-What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
 Date:           December 3, 2009
 KernelVersion:  2.6.32
 Contact:        dmaengine@vger.kernel.org
 Description:	Version of ioatdma device.
 
-What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
 Date:           August 8, 2017
 KernelVersion:  4.14
 Contact:        dmaengine@vger.kernel.org
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
index 00fa04c76ff3..f5724bb5b462 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -12,13 +12,15 @@ Description:
 		resets. Three registers are used by the FSBL and
 		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
-		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+		Example::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
-		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
 
 Users:		Xilinx
 
@@ -39,13 +41,15 @@ Description:
 		software products: PERS_GLOB_GEN_STORAGE{4:7}.
 		Register is reset only by a POR reset.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
-		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+		Example::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
-		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
 
 Users:		Xilinx
 
@@ -61,23 +65,28 @@ Description:
 
 		Following are available shutdown scopes(subtypes):
 
-		subsystem:	Only the APU along with all of its peripherals
+		subsystem:
+				Only the APU along with all of its peripherals
 				not used by other processing units will be
 				shut down. This may result in the FPD power
 				domain being shut down provided that no other
 				processing unit uses FPD peripherals or DRAM.
-		ps_only:	The complete PS will be shut down, including the
+		ps_only:
+				The complete PS will be shut down, including the
 				RPU, PMU, etc.  Only the PL domain (FPGA)
 				remains untouched.
-		system:		The complete system/device is shut down.
+		system:
+				The complete system/device is shut down.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
-		# echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+		Example::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
-		# echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
 
 Users:		Xilinx
 
@@ -94,10 +103,13 @@ Description:
 		system restart.
 
 		Usage:
-		Set healthy bit
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
-		Unset healthy bit
-		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+		Set healthy bit::
+
+		    # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+		Unset healthy bit::
+
+		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
 Users:		Xilinx
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-ib_srp linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-ib_srp
index 84972a57caae..bada15a329f7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-ib_srp
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -6,6 +6,7 @@ Description:	Interface for making ib_srp connect to a new target.
 		One can request ib_srp to connect to a new target by writing
 		a comma-separated list of login parameters to this sysfs
 		attribute. The supported parameters are:
+
 		* id_ext, a 16-digit hexadecimal number specifying the eight
 		  byte identifier extension in the 16-byte SRP target port
 		  identifier. The target port identifier is sent by ib_srp
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-speakup linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-speakup
index c6a32c434ce9..792f58ba327d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-driver-speakup
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-driver-speakup
@@ -69,6 +69,7 @@ Description:	Controls if typing interrupts output from speakup. With
 		speakup if for example
 		the say screen command is used before the
 		entire screen  is read.
+
 		With no_interrupt set to one, if the say
 		screen command is used, and one then types on the keyboard,
 		speakup will continue to say the whole screen regardless until
@@ -215,8 +216,10 @@ Description:	This file contains names for key states.
 		Again, these are part of the help system.  For instance, if you
 		had pressed speakup + keypad 3, you would hear:
 		"speakup keypad 3 is go to bottom edge."
+
 		The speakup key is depressed, so the name of the key state is
 		speakup.
+
 		This part of the message comes from the states collection.
 
 What:		/sys/accessibility/speakup/i18n/characters
@@ -297,6 +300,7 @@ KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Controls if punctuation is spoken by speakup, or by the
 		synthesizer.
+
 		For example, speakup speaks ">" as "greater", while
 		the espeak synthesizer used by the soft driver speaks "greater
 		than". Zero lets speakup speak the punctuation. One lets the
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-firmware-efi-vars linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-firmware-efi-vars
index 5def20b9019e..46ccd233e359 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-firmware-efi-vars
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-firmware-efi-vars
@@ -17,6 +17,7 @@ Description:
 		directory has a name of the form "<key>-<vendor guid>"
 		and contains the following files:
 
+		=============== ========================================
 		attributes:	A read-only text file enumerating the
 				EFI variable flags.  Potential values
 				include:
@@ -59,12 +60,14 @@ Description:
 
 		size:		As ASCII representation of the size of
 				the variable's value.
+		=============== ========================================
 
 
 		In addition, two other magic binary files are provided
 		in the top-level directory and are used for adding and
 		removing variables:
 
+		=============== ========================================
 		new_var:	Takes a "struct efi_variable" and
 				instructs the EFI firmware to create a
 				new variable.
@@ -73,3 +76,4 @@ Description:
 				instructs the EFI firmware to remove any
 				variable that has a matching vendor GUID
 				and variable key name.
+		=============== ========================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-firmware-opal-dump linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-firmware-opal-dump
index 32fe7f5c4880..1f74f45327ba 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-firmware-opal-dump
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-firmware-opal-dump
@@ -7,6 +7,7 @@ Description:
 
 		This is only for the powerpc/powernv platform.
 
+		=============== ===============================================
 		initiate_dump:	When '1' is written to it,
 				we will initiate a dump.
 				Read this file for supported commands.
@@ -19,8 +20,11 @@ Description:
 				and ID of the dump, use the id and type files.
 				Do not rely on any particular size of dump
 				type or dump id.
+		=============== ===============================================
 
 		Each dump has the following files:
+
+		=============== ===============================================
 		id:		An ASCII representation of the dump ID
 				in hex (e.g. '0x01')
 		type:		An ASCII representation of the type of
@@ -39,3 +43,4 @@ Description:
 				inaccessible.
 				Reading this file will get a list of
 				supported actions.
+		=============== ===============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-firmware-opal-elog linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-firmware-opal-elog
index 2536434d49d0..7c8a61a2d005 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-firmware-opal-elog
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-firmware-opal-elog
@@ -38,6 +38,7 @@ Description:
 		For each log entry (directory), there are the following
 		files:
 
+		==============  ================================================
 		id:		An ASCII representation of the ID of the
 				error log, in hex - e.g. "0x01".
 
@@ -58,3 +59,4 @@ Description:
 				entry will be removed from sysfs.
 				Reading this file will list the supported
 				operations (currently just acknowledge).
+		==============  ================================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-hypervisor-xen linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-hypervisor-xen
index 3cf5cdfcd9a8..748593c64568 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-hypervisor-xen
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -33,6 +33,8 @@ Description:	If running under Xen:
 		Space separated list of supported guest system types. Each type
 		is in the format: <class>-<major>.<minor>-<arch>
 		With:
+
+			======== ============================================
 			<class>: "xen" -- x86: paravirtualized, arm: standard
 				 "hvm" -- x86 only: fully virtualized
 			<major>: major guest interface version
@@ -43,6 +45,7 @@ Description:	If running under Xen:
 				 "x86_64": 64 bit x86 guest
 				 "armv7l": 32 bit arm guest
 				 "aarch64": 64 bit arm guest
+			======== ============================================
 
 What:		/sys/hypervisor/properties/changeset
 Date:		March 2009
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/sysfs-kernel-notes linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-kernel-notes
new file mode 100644
index 000000000000..2c76ee9e67f7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/sysfs-kernel-notes
@@ -0,0 +1,5 @@
+What:		/sys/kernel/notes
+Date:		July 2009
+Contact:	<linux-kernel@vger.kernel.org>
+Description:	The /sys/kernel/notes file contains the binary representation
+		of the running vmlinux's .notes section.
diff --git linux-libre-5.9-gnu/Documentation/ABI/stable/vdso linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/vdso
index 55406ec8a35a..951838d42781 100644
--- linux-libre-5.9-gnu/Documentation/ABI/stable/vdso
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/stable/vdso
@@ -1,3 +1,9 @@
+What:		vDSO
+Date:		July 2011
+KernelVersion:	3.0
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+
 On some architectures, when the kernel loads any userspace program it
 maps an ELF DSO into that program's address space.  This DSO is called
 the vDSO and it often contains useful and highly-optimized alternatives
@@ -23,6 +29,7 @@ Unless otherwise noted, the set of symbols with any given version and the
 ABI of those symbols is considered stable.  It may vary across architectures,
 though.
 
-(As of this writing, this ABI documentation as been confirmed for x86_64.
+Note:
+ As of this writing, this ABI documentation as been confirmed for x86_64.
  The maintainers of the other vDSO-using architectures should confirm
- that it is correct for their architecture.)
+ that it is correct for their architecture.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-acpi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-acpi
index 4ab4e99aa863..c09b640c3cb1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-acpi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-acpi
@@ -14,7 +14,8 @@ Description:
 		This group contains the configuration for user defined ACPI
 		tables. The attributes of a user define table are:
 
-		aml 		- a binary attribute that the user can use to
+		aml
+			      - a binary attribute that the user can use to
 				fill in the ACPI aml definitions. Once the aml
 				data is written to this file and the file is
 				closed the table will be loaded and ACPI devices
@@ -26,11 +27,26 @@ Description:
 		The rest of the attributes are read-only and are valid only
 		after the table has been loaded by filling the aml entry:
 
-		signature 	- ASCII table signature
-		length 		- length of table in bytes, including the header
-		revision 	- ACPI Specification minor version number
-		oem_id 		- ASCII OEM identification
-		oem_table_id 	- ASCII OEM table identification
-		oem_revision 	- OEM revision number
-		asl_compiler_id - ASCII ASL compiler vendor ID
-		asl_compiler_revision - ASL compiler version
+		signature
+				- ASCII table signature
+
+		length
+				- length of table in bytes, including the header
+
+		revision
+				- ACPI Specification minor version number
+
+		oem_id
+				- ASCII OEM identification
+
+		oem_table_id
+				- ASCII OEM table identification
+
+		oem_revision
+				- OEM revision number
+
+		asl_compiler_id
+				- ASCII ASL compiler vendor ID
+
+		asl_compiler_revision
+				- ASL compiler version
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-most linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-most
index ed67a4d9f6d6..bc6b8bd18da4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-most
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-most
@@ -15,22 +15,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -39,18 +45,23 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link
 
 What: 		/sys/kernel/config/most_video/<link>
@@ -59,22 +70,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -83,18 +100,23 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link
 
 What: 		/sys/kernel/config/most_net/<link>
@@ -103,22 +125,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -127,18 +155,23 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link
 
 What: 		/sys/kernel/config/most_sound/<card>
@@ -147,7 +180,8 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		create_card	write '1' to this attribute to trigger the
+		create_card
+				write '1' to this attribute to trigger the
                                 registration of the sound card with the ALSA
 				subsystem.
 
@@ -157,22 +191,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -181,16 +221,21 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-spear-pcie-gadget linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-spear-pcie-gadget
index 840c324ef34d..cf877bd341df 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-spear-pcie-gadget
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -10,22 +10,24 @@ Description:
 	This interfaces can be used to show spear's PCIe device capability.
 
 	Nodes are only visible when configfs is mounted. To mount configfs
-	in /config directory use:
-	# mount -t configfs none /config/
+	in /config directory use::
 
-	For nth PCIe Device Controller
-	/config/pcie-gadget.n/
-		link ... used to enable ltssm and read its status.
-		int_type ...used to configure and read type of supported
-			interrupt
-		no_of_msi ... used to configure number of MSI vector needed and
+	  # mount -t configfs none /config/
+
+	For nth PCIe Device Controller /config/pcie-gadget.n/:
+
+	=============== ======================================================
+	link		used to enable ltssm and read its status.
+	int_type	used to configure and read type of supported interrupt
+	no_of_msi	used to configure number of MSI vector needed and
 			to read no of MSI granted.
-		inta ... write 1 to assert INTA and 0 to de-assert.
-		send_msi ... write MSI vector to be sent.
-		vendor_id ... used to write and read vendor id (hex)
-		device_id ... used to write and read device id (hex)
-		bar0_size ... used to write and read bar0_size
-		bar0_address ... used to write and read bar0 mapped area in hex.
-		bar0_rw_offset ... used to write and read offset of bar0 where
-			bar0_data will be written or read.
-		bar0_data ... used to write and read data at bar0_rw_offset.
+	inta		write 1 to assert INTA and 0 to de-assert.
+	send_msi	write MSI vector to be sent.
+	vendor_id	used to write and read vendor id (hex)
+	device_id	used to write and read device id (hex)
+	bar0_size	used to write and read bar0_size
+	bar0_address	used to write and read bar0 mapped area in hex.
+	bar0_rw_offset	used to write and read offset of bar0 where bar0_data
+			will be written or read.
+	bar0_data	used to write and read data at bar0_rw_offset.
+	=============== ======================================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget
index 4594cc2435e8..dc351e9af80a 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget
@@ -12,22 +12,24 @@ Description:
 
 		The attributes of a gadget:
 
-		UDC		- bind a gadget to UDC/unbind a gadget;
-				write UDC's name found in /sys/class/udc/*
-				to bind a gadget, empty string "" to unbind.
-
-		max_speed	- maximum speed the driver supports. Valid
-				names are super-speed-plus, super-speed,
-				high-speed, full-speed, and low-speed.
-
-		bDeviceClass	- USB device class code
-		bDeviceSubClass	- USB device subclass code
-		bDeviceProtocol	- USB device protocol code
-		bMaxPacketSize0	- maximum endpoint 0 packet size
-		bcdDevice	- bcd device release number
-		bcdUSB		- bcd USB specification version number
-		idProduct	- product ID
-		idVendor	- vendor ID
+		================  ============================================
+		UDC		  bind a gadget to UDC/unbind a gadget;
+				  write UDC's name found in /sys/class/udc/*
+				  to bind a gadget, empty string "" to unbind.
+
+		max_speed	  maximum speed the driver supports. Valid
+				  names are super-speed-plus, super-speed,
+				  high-speed, full-speed, and low-speed.
+
+		bDeviceClass	  USB device class code
+		bDeviceSubClass	  USB device subclass code
+		bDeviceProtocol	  USB device protocol code
+		bMaxPacketSize0	  maximum endpoint 0 packet size
+		bcdDevice	  bcd device release number
+		bcdUSB		  bcd USB specification version number
+		idProduct	  product ID
+		idVendor	  vendor ID
+		================  ============================================
 
 What:		/config/usb-gadget/gadget/configs
 Date:		Jun 2013
@@ -41,8 +43,10 @@ KernelVersion:	3.11
 Description:
 		The attributes of a configuration:
 
-		bmAttributes	- configuration characteristics
-		MaxPower	- maximum power consumption from the bus
+		================  ======================================
+		bmAttributes	  configuration characteristics
+		MaxPower	  maximum power consumption from the bus
+		================  ======================================
 
 What:		/config/usb-gadget/gadget/configs/config/strings
 Date:		Jun 2013
@@ -57,7 +61,9 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		configuration	- configuration description
+		================  =========================
+		configuration	  configuration description
+		================  =========================
 
 
 What:		/config/usb-gadget/gadget/functions
@@ -76,8 +82,10 @@ Description:
 
 		The attributes:
 
-		compatible_id		- 8-byte string for "Compatible ID"
-		sub_compatible_id	- 8-byte string for "Sub Compatible ID"
+		=================	=====================================
+		compatible_id		8-byte string for "Compatible ID"
+		sub_compatible_id	8-byte string for "Sub Compatible ID"
+		=================	=====================================
 
 What:		/config/usb-gadget/gadget/functions/<func>.<inst>/interface.<n>/<property>
 Date:		May 2014
@@ -89,16 +97,19 @@ Description:
 
 		The attributes:
 
-		type		- value 1..7 for interpreting the data
-				1: unicode string
-				2: unicode string with environment variable
-				3: binary
-				4: little-endian 32-bit
-				5: big-endian 32-bit
-				6: unicode string with a symbolic link
-				7: multiple unicode strings
-		data		- blob of data to be interpreted depending on
+		=====		===============================================
+		type		value 1..7 for interpreting the data
+
+				- 1: unicode string
+				- 2: unicode string with environment variable
+				- 3: binary
+				- 4: little-endian 32-bit
+				- 5: big-endian 32-bit
+				- 6: unicode string with a symbolic link
+				- 7: multiple unicode strings
+		data		blob of data to be interpreted depending on
 				type
+		=====		===============================================
 
 What:		/config/usb-gadget/gadget/strings
 Date:		Jun 2013
@@ -113,9 +124,11 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		serialnumber	- gadget's serial number (string)
-		product		- gadget's product description
-		manufacturer	- gadget's manufacturer description
+		============	=================================
+		serialnumber	gadget's serial number (string)
+		product		gadget's product description
+		manufacturer	gadget's manufacturer description
+		============	=================================
 
 What:		/config/usb-gadget/gadget/os_desc
 Date:		May 2014
@@ -123,8 +136,10 @@ KernelVersion:	3.16
 Description:
 		This group contains "OS String" extension handling attributes.
 
-		use		- flag turning "OS Desctiptors" support on/off
-		b_vendor_code	- one-byte value used for custom per-device and
+		=============	===============================================
+		use		flag turning "OS Desctiptors" support on/off
+		b_vendor_code	one-byte value used for custom per-device and
 				per-interface requests
-		qw_sign		- an identifier to be reported as "OS String"
+		qw_sign		an identifier to be reported as "OS String"
 				proper
+		=============	===============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-ecm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-ecm
index 0addf7704b4c..272bc1e4ce2e 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-ecm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-ecm
@@ -4,13 +4,17 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		ifname
+			      - network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult	
+			      - queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr
+			      - MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr
+			      - MAC address of device's end of this
 				Ethernet over USB link
 
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-eem linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-eem
index a4c57158fcde..178c3d5fb647 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-eem
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-eem
@@ -4,11 +4,13 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		==========	=============================================
+		ifname		network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult		queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr	MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr	MAC address of device's end of this
 				Ethernet over USB link
+		==========	=============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-hid linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-hid
index f12e00e6baa3..748705c4cb58 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-hid
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-hid
@@ -4,8 +4,10 @@ KernelVersion:	3.19
 Description:
 		The attributes:
 
-		protocol	- HID protocol to use
-		report_desc	- blob corresponding to HID report descriptors
+		=============	============================================
+		protocol	HID protocol to use
+		report_desc	blob corresponding to HID report descriptors
 				except the data passed through /dev/hidg<N>
-		report_length	- HID report length
-		subclass	- HID device subclass to use
+		report_length	HID report length
+		subclass	HID device subclass to use
+		=============	============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-loopback linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-loopback
index 06beefbcf061..e6c6ba5ac7ff 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-loopback
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-loopback
@@ -4,5 +4,7 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		qlen		- depth of loopback queue
-		buflen		- buffer length
+		=======		=======================
+		qlen		depth of loopback queue
+		buflen		buffer length
+		=======		=======================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-mass-storage linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
index 9931fb0d63ba..c86b63a7bb43 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
@@ -4,12 +4,14 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		stall		- Set to permit function to halt bulk endpoints.
+		===========	==============================================
+		stall		Set to permit function to halt bulk endpoints.
 				Disabled on some USB devices known not to work
 				correctly. You should set it to true.
-		num_buffers	- Number of pipeline buffers. Valid numbers
+		num_buffers	Number of pipeline buffers. Valid numbers
 				are 2..4. Available only if
 				CONFIG_USB_GADGET_DEBUG_FILES is set.
+		===========	==============================================
 
 What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
 Date:		Oct 2013
@@ -17,15 +19,17 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		file		- The path to the backing file for the LUN.
+		===========	==============================================
+		file		The path to the backing file for the LUN.
 				Required if LUN is not marked as removable.
-		ro		- Flag specifying access to the LUN shall be
+		ro		Flag specifying access to the LUN shall be
 				read-only. This is implied if CD-ROM emulation
 				is enabled as well as when it was impossible
 				to open "filename" in R/W mode.
-		removable	- Flag specifying that LUN shall be indicated as
+		removable	Flag specifying that LUN shall be indicated as
 				being removable.
-		cdrom		- Flag specifying that LUN shall be reported as
+		cdrom		Flag specifying that LUN shall be reported as
 				being a CD-ROM.
-		nofua		- Flag specifying that FUA flag
+		nofua		Flag specifying that FUA flag
 				in SCSI WRITE(10,12)
+		===========	==============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-midi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-midi
index 6b341df7249c..07389cddd51a 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-midi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-midi
@@ -4,9 +4,11 @@ KernelVersion:	3.19
 Description:
 		The attributes:
 
-		index		- index value for the USB MIDI adapter
-		id		- ID string for the USB MIDI adapter
-		buflen		- MIDI buffer length
-		qlen		- USB read request queue length
-		in_ports	- number of MIDI input ports
-		out_ports	- number of MIDI output ports
+		==========	====================================
+		index		index value for the USB MIDI adapter
+		id		ID string for the USB MIDI adapter
+		buflen		MIDI buffer length
+		qlen		USB read request queue length
+		in_ports	number of MIDI input ports
+		out_ports	number of MIDI output ports
+		==========	====================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-printer linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-printer
index 6b0714e3c605..7aa731bac2da 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-printer
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-printer
@@ -4,6 +4,8 @@ KernelVersion:	4.1
 Description:
 		The attributes:
 
-		pnp_string	- Data to be passed to the host in pnp string
-		q_len		- Number of requests per endpoint
+		==========      ===========================================
+		pnp_string	Data to be passed to the host in pnp string
+		q_len		Number of requests per endpoint
+		==========      ===========================================
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-rndis linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-rndis
index 137399095d74..9416eda7fe93 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-rndis
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-rndis
@@ -4,14 +4,16 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		=========	=============================================
+		ifname		network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult		queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr	MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr	MAC address of device's end of this
 				Ethernet over USB link
-		class		- USB interface class, default is 02 (hex)
-		subclass	- USB interface subclass, default is 06 (hex)
-		protocol	- USB interface protocol, default is 00 (hex)
+		class		USB interface class, default is 02 (hex)
+		subclass	USB interface subclass, default is 06 (hex)
+		protocol	USB interface protocol, default is 00 (hex)
+		=========	=============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-sourcesink linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
index f56335af2d88..1f3d31b607b7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@@ -4,11 +4,13 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		pattern		- 0 (all zeros), 1 (mod63), 2 (none)
-		isoc_interval	- 1..16
-		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
-		isoc_mult	- 0..2 (hs/ss only)
-		isoc_maxburst	- 0..15 (ss only)
-		buflen		- buffer length
-		bulk_qlen	- depth of queue for bulk
-		iso_qlen	- depth of queue for iso
+		==============    ==================================
+		pattern		  0 (all zeros), 1 (mod63), 2 (none)
+		isoc_interval	  1..16
+		isoc_maxpacket	  0 - 1023 (fs), 0 - 1024 (hs/ss)
+		isoc_mult	  0..2 (hs/ss only)
+		isoc_maxburst	  0..15 (ss only)
+		buflen		  buffer length
+		bulk_qlen	  depth of queue for bulk
+		iso_qlen	  depth of queue for iso
+		==============    ==================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-subset linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-subset
index 9373e2c51ea4..0061b864351f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-subset
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-subset
@@ -4,11 +4,13 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		==========	=============================================
+		ifname		network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult		queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr	MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr	MAC address of device's end of this
 				Ethernet over USB link
+		==========	=============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac1 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac1
index abfe447c848f..dc23fd776943 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac1
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac1
@@ -4,11 +4,13 @@ KernelVersion:	4.14
 Description:
 		The attributes:
 
-		c_chmask - capture channel mask
-		c_srate - capture sampling rate
-		c_ssize - capture sample size (bytes)
-		p_chmask - playback channel mask
-		p_srate - playback sampling rate
-		p_ssize - playback sample size (bytes)
-		req_number - the number of pre-allocated request
-			for both capture and playback
+		==========	===================================
+		c_chmask	capture channel mask
+		c_srate		capture sampling rate
+		c_ssize		capture sample size (bytes)
+		p_chmask	playback channel mask
+		p_srate		playback sampling rate
+		p_ssize		playback sample size (bytes)
+		req_number	the number of pre-allocated request
+				for both capture and playback
+		==========	===================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac2 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac2
index 2bfdd4efa9bd..d4356c8b8cd6 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac2
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-uac2
@@ -4,9 +4,11 @@ KernelVersion:	3.18
 Description:
 		The attributes:
 
-		c_chmask - capture channel mask
-		c_srate - capture sampling rate
-		c_ssize - capture sample size (bytes)
-		p_chmask - playback channel mask
-		p_srate - playback sampling rate
-		p_ssize - playback sample size (bytes)
+		=========  ============================
+		c_chmask   capture channel mask
+		c_srate    capture sampling rate
+		c_ssize    capture sample size (bytes)
+		p_chmask   playback channel mask
+		p_srate    playback sampling rate
+		p_ssize    playback sample size (bytes)
+		=========  ============================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 809765bd9573..ac5e11af79a8 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -3,9 +3,11 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	UVC function directory
 
-		streaming_maxburst	- 0..15 (ss only)
-		streaming_maxpacket	- 1..1023 (fs), 1..3072 (hs/ss)
-		streaming_interval	- 1..16
+		===================	=============================
+		streaming_maxburst	0..15 (ss only)
+		streaming_maxpacket	1..1023 (fs), 1..3072 (hs/ss)
+		streaming_interval	1..16
+		===================	=============================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control
 Date:		Dec 2014
@@ -13,8 +15,11 @@ KernelVersion:	4.0
 Description:	Control descriptors
 
 		All attributes read only:
-		bInterfaceNumber	- USB interface number for this
-					  streaming interface
+
+		================	=============================
+		bInterfaceNumber	USB interface number for this
+					streaming interface
+		================	=============================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/class
 Date:		Dec 2014
@@ -47,13 +52,16 @@ KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
 		All attributes read only:
-		iTerminal	- index of string descriptor
-		bSourceID 	- id of the terminal to which this terminal
+
+		==============	=============================================
+		iTerminal	index of string descriptor
+		bSourceID	id of the terminal to which this terminal
 				is connected
-		bAssocTerminal	- id of the input terminal to which this output
+		bAssocTerminal	id of the input terminal to which this output
 				terminal is associated
-		wTerminalType	- terminal type
-		bTerminalID	- a non-zero id of this terminal
+		wTerminalType	terminal type
+		bTerminalID	a non-zero id of this terminal
+		==============	=============================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
 Date:		Dec 2014
@@ -66,16 +74,19 @@ KernelVersion:	4.0
 Description:	Default camera terminal descriptors
 
 		All attributes read only:
-		bmControls		- bitmap specifying which controls are
-					supported for the video stream
-		wOcularFocalLength	- the value of Locular
-		wObjectiveFocalLengthMax- the value of Lmin
-		wObjectiveFocalLengthMin- the value of Lmax
-		iTerminal		- index of string descriptor
-		bAssocTerminal		- id of the output terminal to which
-					this terminal is connected
-		wTerminalType		- terminal type
-		bTerminalID		- a non-zero id of this terminal
+
+		========================  ====================================
+		bmControls		  bitmap specifying which controls are
+					  supported for the video stream
+		wOcularFocalLength	  the value of Locular
+		wObjectiveFocalLengthMax  the value of Lmin
+		wObjectiveFocalLengthMin  the value of Lmax
+		iTerminal		  index of string descriptor
+		bAssocTerminal		  id of the output terminal to which
+					  this terminal is connected
+		wTerminalType		  terminal type
+		bTerminalID		  a non-zero id of this terminal
+		========================  ====================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/processing
 Date:		Dec 2014
@@ -88,13 +99,16 @@ KernelVersion:	4.0
 Description:	Default processing unit descriptors
 
 		All attributes read only:
-		iProcessing	- index of string descriptor
-		bmControls	- bitmap specifying which controls are
+
+		===============	========================================
+		iProcessing	index of string descriptor
+		bmControls	bitmap specifying which controls are
 				supported for the video stream
-		wMaxMultiplier	- maximum digital magnification x100
-		bSourceID	- id of the terminal to which this unit is
+		wMaxMultiplier	maximum digital magnification x100
+		bSourceID	id of the terminal to which this unit is
 				connected
-		bUnitID		- a non-zero id of this unit
+		bUnitID		a non-zero id of this unit
+		===============	========================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/header
 Date:		Dec 2014
@@ -114,8 +128,11 @@ KernelVersion:	4.0
 Description:	Streaming descriptors
 
 		All attributes read only:
-		bInterfaceNumber	- USB interface number for this
-					  streaming interface
+
+		================	=============================
+		bInterfaceNumber	USB interface number for this
+					streaming interface
+		================	=============================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class
 Date:		Dec 2014
@@ -148,13 +165,16 @@ KernelVersion:	4.0
 Description:	Default color matching descriptors
 
 		All attributes read only:
-		bMatrixCoefficients	- matrix used to compute luma and
-					chroma values from the color primaries
-		bTransferCharacteristics- optoelectronic transfer
-					characteristic of the source picutre,
-					also called the gamma function
-		bColorPrimaries		- color primaries and the reference
-					white
+
+		========================  ======================================
+		bMatrixCoefficients	  matrix used to compute luma and
+					  chroma values from the color primaries
+		bTransferCharacteristics  optoelectronic transfer
+					  characteristic of the source picutre,
+					  also called the gamma function
+		bColorPrimaries		  color primaries and the reference
+					  white
+		========================  ======================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
 Date:		Dec 2014
@@ -168,47 +188,52 @@ Description:	Specific MJPEG format descriptors
 
 		All attributes read only,
 		except bmaControls and bDefaultFrameIndex:
-		bFormatIndex		- unique id for this format descriptor;
+
+		===================	=====================================
+		bFormatIndex		unique id for this format descriptor;
 					only defined after parent header is
 					linked into the streaming class;
 					read-only
-		bmaControls		- this format's data for bmaControls in
+		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	- specifies interlace information,
+		bmInterfaceFlags	specifies interlace information,
 					read-only
-		bAspectRatioY		- the X dimension of the picture aspect
+		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only
-		bAspectRatioX		- the Y dimension of the picture aspect
+		bAspectRatioX		the Y dimension of the picture aspect
 					ratio, read-only
-		bmFlags			- characteristics of this format,
+		bmFlags			characteristics of this format,
 					read-only
-		bDefaultFrameIndex	- optimum frame index for this stream
+		bDefaultFrameIndex	optimum frame index for this stream
+		===================	=====================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
 Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific MJPEG frame descriptors
 
-		bFrameIndex		- unique id for this framedescriptor;
-					only defined after parent format is
-					linked into the streaming header;
-					read-only
-		dwFrameInterval		- indicates how frame interval can be
-					programmed; a number of values
-					separated by newline can be specified
-		dwDefaultFrameInterval	- the frame interval the device would
-					like to use as default
-		dwMaxVideoFrameBufferSize- the maximum number of bytes the
-					compressor will produce for a video
-					frame or still image
-		dwMaxBitRate		- the maximum bit rate at the shortest
-					frame interval in bps
-		dwMinBitRate		- the minimum bit rate at the longest
-					frame interval in bps
-		wHeight			- height of decoded bitmap frame in px
-		wWidth			- width of decoded bitmam frame in px
-		bmCapabilities		- still image support, fixed frame-rate
-					support
+		=========================  =====================================
+		bFrameIndex		   unique id for this framedescriptor;
+					   only defined after parent format is
+					   linked into the streaming header;
+					   read-only
+		dwFrameInterval		   indicates how frame interval can be
+					   programmed; a number of values
+					   separated by newline can be specified
+		dwDefaultFrameInterval	   the frame interval the device would
+					   like to use as default
+		dwMaxVideoFrameBufferSize  the maximum number of bytes the
+					   compressor will produce for a video
+					   frame or still image
+		dwMaxBitRate		   the maximum bit rate at the shortest
+					   frame interval in bps
+		dwMinBitRate		   the minimum bit rate at the longest
+					   frame interval in bps
+		wHeight			   height of decoded bitmap frame in px
+		wWidth			   width of decoded bitmam frame in px
+		bmCapabilities		   still image support, fixed frame-rate
+					   support
+		=========================  =====================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
 Date:		Dec 2014
@@ -220,50 +245,54 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific uncompressed format descriptors
 
-		bFormatIndex		- unique id for this format descriptor;
+		==================	=======================================
+		bFormatIndex		unique id for this format descriptor;
 					only defined after parent header is
 					linked into the streaming class;
 					read-only
-		bmaControls		- this format's data for bmaControls in
+		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	- specifies interlace information,
+		bmInterfaceFlags	specifies interlace information,
 					read-only
-		bAspectRatioY		- the X dimension of the picture aspect
+		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only
-		bAspectRatioX		- the Y dimension of the picture aspect
+		bAspectRatioX		the Y dimension of the picture aspect
 					ratio, read-only
-		bDefaultFrameIndex	- optimum frame index for this stream
-		bBitsPerPixel		- number of bits per pixel used to
+		bDefaultFrameIndex	optimum frame index for this stream
+		bBitsPerPixel		number of bits per pixel used to
 					specify color in the decoded video
 					frame
-		guidFormat		- globally unique id used to identify
+		guidFormat		globally unique id used to identify
 					stream-encoding format
+		==================	=======================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
 Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific uncompressed frame descriptors
 
-		bFrameIndex		- unique id for this framedescriptor;
-					only defined after parent format is
-					linked into the streaming header;
-					read-only
-		dwFrameInterval		- indicates how frame interval can be
-					programmed; a number of values
-					separated by newline can be specified
-		dwDefaultFrameInterval	- the frame interval the device would
-					like to use as default
-		dwMaxVideoFrameBufferSize- the maximum number of bytes the
-					compressor will produce for a video
-					frame or still image
-		dwMaxBitRate		- the maximum bit rate at the shortest
-					frame interval in bps
-		dwMinBitRate		- the minimum bit rate at the longest
-					frame interval in bps
-		wHeight			- height of decoded bitmap frame in px
-		wWidth			- width of decoded bitmam frame in px
-		bmCapabilities		- still image support, fixed frame-rate
-					support
+		=========================  =====================================
+		bFrameIndex		   unique id for this framedescriptor;
+					   only defined after parent format is
+					   linked into the streaming header;
+					   read-only
+		dwFrameInterval		   indicates how frame interval can be
+					   programmed; a number of values
+					   separated by newline can be specified
+		dwDefaultFrameInterval	   the frame interval the device would
+					   like to use as default
+		dwMaxVideoFrameBufferSize  the maximum number of bytes the
+					   compressor will produce for a video
+					   frame or still image
+		dwMaxBitRate		   the maximum bit rate at the shortest
+					   frame interval in bps
+		dwMinBitRate		   the minimum bit rate at the longest
+					   frame interval in bps
+		wHeight			   height of decoded bitmap frame in px
+		wWidth			   width of decoded bitmam frame in px
+		bmCapabilities		   still image support, fixed frame-rate
+					   support
+		=========================  =====================================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/header
 Date:		Dec 2014
@@ -276,17 +305,20 @@ KernelVersion:	4.0
 Description:	Specific streaming header descriptors
 
 		All attributes read only:
-		bTriggerUsage		- how the host software will respond to
+
+		====================	=====================================
+		bTriggerUsage		how the host software will respond to
 					a hardware trigger interrupt event
-		bTriggerSupport		- flag specifying if hardware
+		bTriggerSupport		flag specifying if hardware
 					triggering is supported
-		bStillCaptureMethod	- method of still image caputre
+		bStillCaptureMethod	method of still image caputre
 					supported
-		bTerminalLink		- id of the output terminal to which
+		bTerminalLink		id of the output terminal to which
 					the video endpoint of this interface
 					is connected
-		bmInfo			- capabilities of this video streaming
+		bmInfo			capabilities of this video streaming
 					interface
+		====================	=====================================
 
 What:		/sys/class/udc/udc.name/device/gadget/video4linux/video.name/function_name
 Date:		May 2018
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-cec-error-inj linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-cec-error-inj
index 5afcd78fbdb7..8debcb08a3b5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-cec-error-inj
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-cec-error-inj
@@ -23,7 +23,7 @@ error injections without having to know the details of the driver-specific
 commands.
 
 Note that the output of 'error-inj' shall be valid as input to 'error-inj'.
-So this must work:
+So this must work::
 
 	$ cat error-inj >einj.txt
 	$ cat einj.txt >error-inj
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs
index 2e9ae311e02d..c5d678d39144 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -20,9 +20,13 @@ Description:    Allow the root user to disable/enable in runtime the clock
                 The user can supply a bitmask value, each bit represents
                 a different engine to disable/enable its clock gating feature.
                 The bitmask is composed of 20 bits:
-                0  -  7 : DMA channels
-                8  - 11 : MME engines
-                12 - 19 : TPC engines
+
+		=======   ============
+                0  -  7   DMA channels
+                8  - 11   MME engines
+                12 - 19   TPC engines
+		=======   ============
+
                 The bit's location of a specific engine can be determined
                 using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
                 are defined in uapi habanalabs.h file in enum gaudi_engine_id
@@ -59,6 +63,7 @@ Description:    Allows the root user to read or write directly through the
                 the generic Linux user-space PCI mapping) because the DDR bar
                 is very small compared to the DDR memory and only the driver can
                 move the bar before and after the transaction.
+
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 
@@ -73,6 +78,7 @@ Description:    Allows the root user to read or write 64 bit data directly
                 the generic Linux user-space PCI mapping) because the DDR bar
                 is very small compared to the DDR memory and only the driver can
                 move the bar before and after the transaction.
+
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-ec linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-ec
index 6546115a94da..ab6099daa8f5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-ec
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-ec
@@ -6,7 +6,7 @@ Description:
 General information like which GPE is assigned to the EC and whether
 the global lock should get used.
 Knowing the EC GPE one can watch the amount of HW events related to
-the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+the EC here (XY -> GPE number from `/sys/kernel/debug/ec/*/gpe`):
 /sys/firmware/acpi/interrupts/gpeXY
 
 The io file is binary and a userspace tool located here:
@@ -14,7 +14,8 @@ ftp://ftp.suse.com/pub/people/trenn/sources/ec/
 should get used to read out the 256 Embedded Controller registers
 or writing to them.
 
-CAUTION: Do not write to the Embedded Controller if you don't know
-what you are doing! Rebooting afterwards also is a good idea.
-This can influence the way your machine is cooled and fans may
-not get switched on again after you did a wrong write.
+CAUTION:
+  Do not write to the Embedded Controller if you don't know
+  what you are doing! Rebooting afterwards also is a good idea.
+  This can influence the way your machine is cooled and fans may
+  not get switched on again after you did a wrong write.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-moxtet linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-moxtet
index 67b1717794d8..6eee10c3d5a1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-moxtet
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-moxtet
@@ -2,13 +2,19 @@ What:		/sys/kernel/debug/moxtet/input
 Date:		March 2019
 KernelVersion:	5.3
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) Read input from the shift registers, in hexadecimal.
+Description:	(Read) Read input from the shift registers, in hexadecimal.
 		Returns N+1 bytes, where N is the number of Moxtet connected
 		modules. The first byte is from the CPU board itself.
-		Example: 101214
-			 10: CPU board with SD card
-			 12: 2 = PCIe module, 1 = IRQ not active
-			 14: 4 = Peridot module, 1 = IRQ not active
+
+		Example::
+
+			101214
+
+		==  =======================================
+		10  CPU board with SD card
+		12  2 = PCIe module, 1 = IRQ not active
+		14  4 = Peridot module, 1 = IRQ not active
+		==  =======================================
 
 What:		/sys/kernel/debug/moxtet/output
 Date:		March 2019
@@ -17,7 +23,13 @@ Contact:	Marek Behún <marek.behun@nic.cz>
 Description:	(RW) Read last written value to the shift registers, in
 		hexadecimal, or write values to the shift registers, also
 		in hexadecimal.
-		Example: 0102
-			 01: 01 was last written, or is to be written, to the
-			     first module's shift register
-			 02: the same for second module
+
+		Example::
+
+		    0102
+
+		==  ================================================
+		01  01 was last written, or is to be written, to the
+		    first module's shift register
+		02  the same for second module
+		==  ================================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-pfo-nx-crypto linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-pfo-nx-crypto
index 685d5a448423..f75a655c1531 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-pfo-nx-crypto
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-pfo-nx-crypto
@@ -4,42 +4,42 @@ KernelVersion:	3.4
 Contact:	Kent Yoder <key@linux.vnet.ibm.com>
 Description:
 
-  These debugfs interfaces are built by the nx-crypto driver, built in
+These debugfs interfaces are built by the nx-crypto driver, built in
 arch/powerpc/crypto/nx.
 
 Error Detection
 ===============
 
 errors:
-- A u32 providing a total count of errors since the driver was loaded. The
-only errors counted here are those returned from the hcall, H_COP_OP.
+  A u32 providing a total count of errors since the driver was loaded. The
+  only errors counted here are those returned from the hcall, H_COP_OP.
 
 last_error:
-- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
-recorded here (the hcall will retry until -EBUSY goes away).
+  The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
+  recorded here (the hcall will retry until -EBUSY goes away).
 
 last_error_pid:
-- The process ID of the process who received the most recent error from the
-hcall.
+  The process ID of the process who received the most recent error from the
+  hcall.
 
 Device Use
 ==========
 
 aes_bytes:
-- The total number of bytes encrypted using AES in any of the driver's
-supported modes.
+  The total number of bytes encrypted using AES in any of the driver's
+  supported modes.
 
 aes_ops:
-- The total number of AES operations submitted to the hardware.
+  The total number of AES operations submitted to the hardware.
 
 sha256_bytes:
-- The total number of bytes hashed by the hardware using SHA-256.
+  The total number of bytes hashed by the hardware using SHA-256.
 
 sha256_ops:
-- The total number of SHA-256 operations submitted to the hardware.
+  The total number of SHA-256 operations submitted to the hardware.
 
 sha512_bytes:
-- The total number of bytes hashed by the hardware using SHA-512.
+  The total number of bytes hashed by the hardware using SHA-512.
 
 sha512_ops:
-- The total number of SHA-512 operations submitted to the hardware.
+  The total number of SHA-512 operations submitted to the hardware.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-pktcdvd linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-pktcdvd
index cf11736acb76..f6f65a4faea0 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-pktcdvd
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-pktcdvd
@@ -4,16 +4,15 @@ KernelVersion:  2.6.20
 Contact:        Thomas Maier <balagi@justmail.de>
 Description:
 
-debugfs interface
------------------
-
 The pktcdvd module (packet writing driver) creates
 these files in debugfs:
 
 /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
-    info            (0444) Lots of driver statistics and infos.
 
-Example:
--------
+    ====            ====== ====================================
+    info            0444   Lots of driver statistics and infos.
+    ====            ====== ====================================
+
+Example::
 
-cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
+    cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-turris-mox-rwtm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-turris-mox-rwtm
index 2b3255ee68fd..326df1b74707 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-turris-mox-rwtm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-turris-mox-rwtm
@@ -2,8 +2,13 @@ What:		/sys/kernel/debug/turris-mox-rwtm/do_sign
 Date:		Jun 2020
 KernelVersion:	5.8
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(W) Message to sign with the ECDSA private key stored in
-		    device's OTP. The message must be exactly 64 bytes (since
-		    this is intended for SHA-512 hashes).
-		(R) The resulting signature, 136 bytes. This contains the R and
-		    S values of the ECDSA signature, both in big-endian format.
+Description:
+
+		======= ===========================================================
+		(Write) Message to sign with the ECDSA private key stored in
+		        device's OTP. The message must be exactly 64 bytes
+		        (since this is intended for SHA-512 hashes).
+		(Read)  The resulting signature, 136 bytes. This contains the
+			R and S values of the ECDSA signature, both in
+			big-endian format.
+		======= ===========================================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-wilco-ec linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-wilco-ec
index 9d8d9d2def5b..682e3c09ef4d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/debugfs-wilco-ec
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/debugfs-wilco-ec
@@ -27,16 +27,17 @@ Description:
 		for writing, two for the type and at least a single byte of
 		data.
 
-		Example:
-		// Request EC info type 3 (EC firmware build date)
-		// Corresponds with sending type 0x00f0 with
-		// MBOX = [38, 00, 03, 00]
-		$ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
-		// View the result. The decoded ASCII result "12/21/18" is
-		// included after the raw hex.
-		// Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
-		$ cat /sys/kernel/debug/wilco_ec/raw
-		00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  ..12/21/18.8...
+		Example::
+
+		    // Request EC info type 3 (EC firmware build date)
+		    // Corresponds with sending type 0x00f0 with
+		    // MBOX = [38, 00, 03, 00]
+		    $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
+		    // View the result. The decoded ASCII result "12/21/18" is
+		    // included after the raw hex.
+		    // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
+		    $ cat /sys/kernel/debug/wilco_ec/raw
+		    00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  ..12/21/18.8...
 
 		Note that the first 16 bytes of the received MBOX[] will be
 		printed, even if some of the data is junk, and skipping bytes
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/dell-smbios-wmi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/dell-smbios-wmi
index fc919ce16008..5f3a0dc67050 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/dell-smbios-wmi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/dell-smbios-wmi
@@ -10,29 +10,29 @@ Description:
 		<uapi/linux/wmi.h>
 
 		1) To perform an SMBIOS call from userspace, you'll need to
-		first determine the minimum size of the calling interface
-		buffer for your machine.
-		Platforms that contain larger buffers can return larger
-		objects from the system firmware.
-		Commonly this size is either 4k or 32k.
+		   first determine the minimum size of the calling interface
+		   buffer for your machine.
+		   Platforms that contain larger buffers can return larger
+		   objects from the system firmware.
+		   Commonly this size is either 4k or 32k.
 
-		To determine the size of the buffer read() a u64 dword from
-		the WMI character device /dev/wmi/dell-smbios.
+		   To determine the size of the buffer read() a u64 dword from
+		   the WMI character device /dev/wmi/dell-smbios.
 
 		2) After you've determined the minimum size of the calling
-		interface buffer, you can allocate a structure that represents
-		the structure documented above.
+		   interface buffer, you can allocate a structure that represents
+		   the structure documented above.
 
 		3) In the 'length' object store the size of the buffer you
-		determined above and allocated.
+		   determined above and allocated.
 
 		4) In this buffer object, prepare as necessary for the SMBIOS
-		call you're interested in.  Typically SMBIOS buffers have
-		"class", "select", and "input" defined to values that coincide
-		with the data you are interested in.
-		Documenting class/select/input values is outside of the scope
-		of this documentation. Check with the libsmbios project for
-		further documentation on these values.
+		   call you're interested in.  Typically SMBIOS buffers have
+		   "class", "select", and "input" defined to values that coincide
+		   with the data you are interested in.
+		   Documenting class/select/input values is outside of the scope
+		   of this documentation. Check with the libsmbios project for
+		   further documentation on these values.
 
 		6) Run the call by using ioctl() as described in the header.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/dev-kmsg linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/dev-kmsg
index 3c0bb76e3417..a377b6c093c9 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/dev-kmsg
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/dev-kmsg
@@ -6,6 +6,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		to the kernel's printk buffer.
 
 		Injecting messages:
+
 		Every write() to the opened device node places a log entry in
 		the kernel's printk buffer.
 
@@ -21,6 +22,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		the messages can always be reliably determined.
 
 		Accessing the buffer:
+
 		Every read() from the opened device node receives one record
 		of the kernel's printk buffer.
 
@@ -48,6 +50,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		if needed, without limiting the interface to a single reader.
 
 		The device supports seek with the following parameters:
+
 		SEEK_SET, 0
 		  seek to the first entry in the buffer
 		SEEK_END, 0
@@ -87,18 +90,22 @@ Description:	The /dev/kmsg character device node provides userspace access
 		readable context of the message, for reliable processing in
 		userspace.
 
-		Example:
-		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
-		 SUBSYSTEM=acpi
-		 DEVICE=+acpi:PNP0A03:00
-		6,339,5140900,-;NET: Registered protocol family 10
-		30,340,5690716,-;udevd[80]: starting version 181
+		Example::
+
+		  7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		   SUBSYSTEM=acpi
+		   DEVICE=+acpi:PNP0A03:00
+		  6,339,5140900,-;NET: Registered protocol family 10
+		  30,340,5690716,-;udevd[80]: starting version 181
 
 		The DEVICE= key uniquely identifies devices the following way:
-		  b12:8        - block dev_t
-		  c127:3       - char dev_t
-		  n8           - netdev ifindex
-		  +sound:card0 - subsystem:devname
+
+		  ============  =================
+		  b12:8         block dev_t
+		  c127:3        char dev_t
+		  n8            netdev ifindex
+		  +sound:card0  subsystem:devname
+		  ============  =================
 
 		The flags field carries '-' by default. A 'c' indicates a
 		fragment of a line. Note, that these hints about continuation
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/evm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/evm
index 201d10319fa1..3c477ba48a31 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/evm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/evm
@@ -17,26 +17,33 @@ Description:
 		echoing a value to <securityfs>/evm made up of the
 		following bits:
 
+		===	  ==================================================
 		Bit	  Effect
+		===	  ==================================================
 		0	  Enable HMAC validation and creation
 		1	  Enable digital signature validation
 		2	  Permit modification of EVM-protected metadata at
 			  runtime. Not supported if HMAC validation and
 			  creation is enabled.
 		31	  Disable further runtime modification of EVM policy
+		===	  ==================================================
 
-		For example:
+		For example::
 
-		echo 1 ><securityfs>/evm
+		  echo 1 ><securityfs>/evm
 
 		will enable HMAC validation and creation
 
-		echo 0x80000003 ><securityfs>/evm
+		::
+
+		  echo 0x80000003 ><securityfs>/evm
 
 		will enable HMAC and digital signature validation and
 		HMAC creation and disable all further modification of policy.
 
-		echo 0x80000006 ><securityfs>/evm
+		::
+
+		  echo 0x80000006 ><securityfs>/evm
 
 		will enable digital signature validation, permit
 		modification of EVM-protected metadata and
@@ -65,7 +72,7 @@ Description:
 		Shows the set of extended attributes used to calculate or
 		validate the EVM signature, and allows additional attributes
 		to be added at runtime. Any signatures generated after
-		additional attributes are added (and on files posessing those
+		additional attributes are added (and on files possessing those
 		additional attributes) will only be valid if the same
 		additional attributes are configured on system boot. Writing
 		a single period (.) will lock the xattr list from any further
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/gpio-cdev linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/gpio-cdev
index 7b265fbb47e3..66bdcd188b6c 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/gpio-cdev
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/gpio-cdev
@@ -12,15 +12,16 @@ Description:
 		The following file operations are supported:
 
 		open(2)
-		Currently the only useful flags are O_RDWR.
+		  Currently the only useful flags are O_RDWR.
 
 		ioctl(2)
-		Initiate various actions.
-		See the inline documentation in [include/uapi]<linux/gpio.h>
-		for descriptions of all ioctls.
+		  Initiate various actions.
+
+		  See the inline documentation in [include/uapi]<linux/gpio.h>
+		  for descriptions of all ioctls.
 
 		close(2)
-		Stops and free up the I/O contexts that was associated
-		with the file descriptor.
+		  Stops and free up the I/O contexts that was associated
+		  with the file descriptor.
 
 Users:		TBD
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/ima_policy linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/ima_policy
index cd572912c593..e35263f97fc1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/ima_policy
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/ima_policy
@@ -15,19 +15,22 @@ Description:
 		IMA appraisal, if configured, uses these file measurements
 		for local measurement appraisal.
 
-		rule format: action [condition ...]
+		::
 
-		action: measure | dont_measure | appraise | dont_appraise |
-			audit | hash | dont_hash
-		condition:= base | lsm  [option]
+		  rule format: action [condition ...]
+
+		  action: measure | dont_measure | appraise | dont_appraise |
+			  audit | hash | dont_hash
+		  condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
 				[euid=] [fowner=] [fsname=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 			option:	[[appraise_type=]] [template=] [permit_directio]
 				[appraise_flag=] [keyrings=]
-		base: 	func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
-				[FIRMWARE_CHECK]
+		  base:
+			func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK]MODULE_CHECK]
+			        [FIRMWARE_CHECK]
 				[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
 				[KEXEC_CMDLINE] [KEY_CHECK]
 			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
@@ -37,8 +40,9 @@ Description:
 			uid:= decimal value
 			euid:= decimal value
 			fowner:= decimal value
-		lsm:  	are LSM specific
-		option:	appraise_type:= [imasig] [imasig|modsig]
+		  lsm:  are LSM specific
+		  option:
+			appraise_type:= [imasig] [imasig|modsig]
 			appraise_flag:= [check_blacklist]
 			Currently, blacklist check is only for files signed with appended
 			signature.
@@ -49,7 +53,7 @@ Description:
 			(eg, ima-ng). Only valid when action is "measure".
 			pcr:= decimal value
 
-		default policy:
+		  default policy:
 			# PROC_SUPER_MAGIC
 			dont_measure fsmagic=0x9fa0
 			dont_appraise fsmagic=0x9fa0
@@ -97,7 +101,8 @@ Description:
 
 		Examples of LSM specific definitions:
 
-		SELinux:
+		SELinux::
+
 			dont_measure obj_type=var_log_t
 			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
@@ -105,10 +110,11 @@ Description:
 			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
 			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
-		Smack:
+		Smack::
+
 			measure subj_user=_ func=FILE_CHECK mask=MAY_READ
 
-		Example of measure rules using alternate PCRs:
+		Example of measure rules using alternate PCRs::
 
 			measure func=KEXEC_KERNEL_CHECK pcr=4
 			measure func=KEXEC_INITRAMFS_CHECK pcr=5
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/procfs-diskstats linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/procfs-diskstats
index 70dcaf2481f4..e58d641443d3 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/procfs-diskstats
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/procfs-diskstats
@@ -6,32 +6,38 @@ Description:
 		of block devices. Each line contains the following 14
 		fields:
 
-		 1 - major number
-		 2 - minor mumber
-		 3 - device name
-		 4 - reads completed successfully
-		 5 - reads merged
-		 6 - sectors read
-		 7 - time spent reading (ms)
-		 8 - writes completed
-		 9 - writes merged
-		10 - sectors written
-		11 - time spent writing (ms)
-		12 - I/Os currently in progress
-		13 - time spent doing I/Os (ms)
-		14 - weighted time spent doing I/Os (ms)
+		==  ===================================
+		 1  major number
+		 2  minor mumber
+		 3  device name
+		 4  reads completed successfully
+		 5  reads merged
+		 6  sectors read
+		 7  time spent reading (ms)
+		 8  writes completed
+		 9  writes merged
+		10  sectors written
+		11  time spent writing (ms)
+		12  I/Os currently in progress
+		13  time spent doing I/Os (ms)
+		14  weighted time spent doing I/Os (ms)
+		==  ===================================
 
 		Kernel 4.18+ appends four more fields for discard
 		tracking putting the total at 18:
 
-		15 - discards completed successfully
-		16 - discards merged
-		17 - sectors discarded
-		18 - time spent discarding
+		==  ===================================
+		15  discards completed successfully
+		16  discards merged
+		17  sectors discarded
+		18  time spent discarding
+		==  ===================================
 
 		Kernel 5.5+ appends two more fields for flush requests:
 
-		19 - flush requests completed successfully
-		20 - time spent flushing
+		==  =====================================
+		19  flush requests completed successfully
+		20  time spent flushing
+		==  =====================================
 
 		For more details refer to Documentation/admin-guide/iostats.rst
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/procfs-smaps_rollup linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/procfs-smaps_rollup
index 046978193368..a4e31c465194 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/procfs-smaps_rollup
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/procfs-smaps_rollup
@@ -14,28 +14,28 @@ Description:
 		For more details, see Documentation/filesystems/proc.rst
 		and the procfs man page.
 
-		Typical output looks like this:
+		Typical output looks like this::
 
-		00100000-ff709000 ---p 00000000 00:00 0		 [rollup]
-		Size:               1192 kB
-		KernelPageSize:        4 kB
-		MMUPageSize:           4 kB
-		Rss:		     884 kB
-		Pss:		     385 kB
-		Pss_Anon:	     301 kB
-		Pss_File:	      80 kB
-		Pss_Shmem:	       4 kB
-		Shared_Clean:	     696 kB
-		Shared_Dirty:	       0 kB
-		Private_Clean:	     120 kB
-		Private_Dirty:	      68 kB
-		Referenced:	     884 kB
-		Anonymous:	      68 kB
-		LazyFree:	       0 kB
-		AnonHugePages:	       0 kB
-		ShmemPmdMapped:	       0 kB
-		Shared_Hugetlb:	       0 kB
-		Private_Hugetlb:       0 kB
-		Swap:		       0 kB
-		SwapPss:	       0 kB
-		Locked:		     385 kB
+			00100000-ff709000 ---p 00000000 00:00 0		 [rollup]
+			Size:               1192 kB
+			KernelPageSize:        4 kB
+			MMUPageSize:           4 kB
+			Rss:		     884 kB
+			Pss:		     385 kB
+			Pss_Anon:	     301 kB
+			Pss_File:	      80 kB
+			Pss_Shmem:	       4 kB
+			Shared_Clean:	     696 kB
+			Shared_Dirty:	       0 kB
+			Private_Clean:	     120 kB
+			Private_Dirty:	      68 kB
+			Referenced:	     884 kB
+			Anonymous:	      68 kB
+			LazyFree:	       0 kB
+			AnonHugePages:	       0 kB
+			ShmemPmdMapped:	       0 kB
+			Shared_Hugetlb:	       0 kB
+			Private_Hugetlb:       0 kB
+			Swap:		       0 kB
+			SwapPss:	       0 kB
+			Locked:		     385 kB
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/pstore linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/pstore
index d45209abdb1b..5b02540781a2 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/pstore
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/pstore
@@ -9,25 +9,25 @@ Description:	Generic interface to platform dependent persistent storage.
 		provide a generic interface to show records captured in
 		the dying moments.  In the case of a panic the last part
 		of the console log is captured, but other interesting
-		data can also be saved.
+		data can also be saved::
 
-		# mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
+		    # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
 
-		$ ls -l /sys/fs/pstore/
-		total 0
-		-r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
+		    $ ls -l /sys/fs/pstore/
+		    total 0
+		    -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
 
 		Different users of this interface will result in different
 		filename prefixes.  Currently two are defined:
 
-		"dmesg"	- saved console log
-		"mce"	- architecture dependent data from fatal h/w error
+		- "dmesg" - saved console log
+		- "mce"   - architecture dependent data from fatal h/w error
 
 		Once the information in a file has been read, removing
 		the file will signal to the underlying persistent storage
-		device that it can reclaim the space for later re-use.
+		device that it can reclaim the space for later re-use::
 
-		$ rm /sys/fs/pstore/dmesg-erst-1
+		    $ rm /sys/fs/pstore/dmesg-erst-1
 
 		The expectation is that all files in /sys/fs/pstore/
 		will be saved elsewhere and erased from persistent store
@@ -44,4 +44,3 @@ Description:	Generic interface to platform dependent persistent storage.
 		backends are available, the preferred backend may be
 		set by passing the pstore.backend= argument to the kernel at
 		boot time.
-
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-block linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-block
index 2322eb748b38..e34cdeeeb9d4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-block
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-block
@@ -4,23 +4,27 @@ Contact:	Jerome Marchand <jmarchan@redhat.com>
 Description:
 		The /sys/block/<disk>/stat files displays the I/O
 		statistics of disk <disk>. They contain 11 fields:
-		 1 - reads completed successfully
-		 2 - reads merged
-		 3 - sectors read
-		 4 - time spent reading (ms)
-		 5 - writes completed
-		 6 - writes merged
-		 7 - sectors written
-		 8 - time spent writing (ms)
-		 9 - I/Os currently in progress
-		10 - time spent doing I/Os (ms)
-		11 - weighted time spent doing I/Os (ms)
-		12 - discards completed
-		13 - discards merged
-		14 - sectors discarded
-		15 - time spent discarding (ms)
-		16 - flush requests completed
-		17 - time spent flushing (ms)
+
+		==  ==============================================
+		 1  reads completed successfully
+		 2  reads merged
+		 3  sectors read
+		 4  time spent reading (ms)
+		 5  writes completed
+		 6  writes merged
+		 7  sectors written
+		 8  time spent writing (ms)
+		 9  I/Os currently in progress
+		10  time spent doing I/Os (ms)
+		11  weighted time spent doing I/Os (ms)
+		12  discards completed
+		13  discards merged
+		14  sectors discarded
+		15  time spent discarding (ms)
+		16  flush requests completed
+		17  time spent flushing (ms)
+		==  ==============================================
+
 		For more details refer Documentation/admin-guide/iostats.rst
 
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-block-device linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-block-device
index 17f2bc7dd261..aa0fb500e3c9 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-block-device
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-block-device
@@ -8,11 +8,13 @@ Description:
 
 		It has the following valid values:
 
+		==	========================================================
 		0	OFF - the LED is not activated on activity
 		1	BLINK_ON - the LED blinks on every 10ms when activity is
 			detected.
 		2	BLINK_OFF - the LED is on when idle, and blinks off
 			every 10ms when activity is detected.
+		==	========================================================
 
 		Note that the user must turn sw_activity OFF it they wish to
 		control the activity LED via the em_message file.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-block-rnbd linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-block-rnbd
index 8f070b47f361..14a6fe9422b3 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-block-rnbd
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-block-rnbd
@@ -9,9 +9,9 @@ Description:	To unmap a volume, "normal" or "force" has to be written to:
 		is using the device.  When "force" is used, the device is also unmapped
 		when device is in use.  All I/Os that are in progress will fail.
 
-		Example:
+		Example::
 
-		# echo "normal" > /sys/block/rnbd0/rnbd/unmap_device
+		  # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device
 
 What:		/sys/block/rnbd<N>/rnbd/state
 Date:		Feb 2020
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-acpi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-acpi
index e7898cfe5fb1..58abacf59b2a 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-acpi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-acpi
@@ -5,6 +5,7 @@ Description:
 		This attribute indicates the full path of ACPI namespace
 		object associated with the device object.  For example,
 		\_SB_.PCI0.
+
 		This file is not present for device objects representing
 		fixed ACPI hardware features (like power and sleep
 		buttons).
@@ -67,14 +68,16 @@ Description:
 		The return value is a decimal integer representing the device's
 		status bitmap:
 
-		Bit [0] –  Set if the device is present.
-		Bit [1] –  Set if the device is enabled and decoding its
-		           resources.
-		Bit [2] –  Set if the device should be shown in the UI.
-		Bit [3] –  Set if the device is functioning properly (cleared if
-		           device failed its diagnostics).
-		Bit [4] –  Set if the battery is present.
-		Bits [31:5] –  Reserved (must be cleared)
+		===========  ==================================================
+		Bit [0]      Set if the device is present.
+		Bit [1]      Set if the device is enabled and decoding its
+		             resources.
+		Bit [2]      Set if the device should be shown in the UI.
+		Bit [3]      Set if the device is functioning properly (cleared
+			     if device failed its diagnostics).
+		Bit [4]      Set if the battery is present.
+		Bits [31:5]  Reserved (must be cleared)
+		===========  ==================================================
 
 		If bit [0] is clear, then bit 1 must also be clear (a device
 		that is not present cannot be enabled).
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti
index 9d11502b4390..bf2869c413e7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-cti
@@ -8,50 +8,50 @@ What:		/sys/bus/coresight/devices/<cti-name>/powered
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Indicate if the CTI hardware is powered.
+Description:	(Read) Indicate if the CTI hardware is powered.
 
 What:		/sys/bus/coresight/devices/<cti-name>/ctmid
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Display the associated CTM ID
+Description:	(Read) Display the associated CTM ID
 
 What:		/sys/bus/coresight/devices/<cti-name>/nr_trigger_cons
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Number of devices connected to triggers on this CTI
+Description:	(Read) Number of devices connected to triggers on this CTI
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/name
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Name of connected device <N>
+Description:	(Read) Name of connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_signals
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Input trigger signals from connected device <N>
+Description:	(Read) Input trigger signals from connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_types
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Functional types for the input trigger signals
+Description:	(Read) Functional types for the input trigger signals
 		from connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_signals
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Output trigger signals to connected device <N>
+Description:	(Read) Output trigger signals to connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_types
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Functional types for the output trigger signals
+Description:	(Read) Functional types for the output trigger signals
 		to connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/inout_sel
@@ -88,7 +88,7 @@ What:		/sys/bus/coresight/devices/<cti-name>/regs/intack
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Write the INTACK register.
+Description:	(Write) Write the INTACK register.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/appset
 Date:		March 2020
@@ -101,99 +101,99 @@ What:		/sys/bus/coresight/devices/<cti-name>/regs/appclear
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Write APPCLEAR register to deactivate channel.
+Description:	(Write) Write APPCLEAR register to deactivate channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/apppulse
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Write APPPULSE to pulse a channel active for one clock
+Description:	(Write) Write APPPULSE to pulse a channel active for one clock
 		cycle.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/chinstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Read current status of channel inputs.
+Description:	(Read) Read current status of channel inputs.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/choutstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) read current status of channel outputs.
+Description:	(Read) read current status of channel outputs.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/triginstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) read current status of input trigger signals
+Description:	(Read) read current status of input trigger signals
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/trigoutstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) read current status of output trigger signals.
+Description:	(Read) read current status of output trigger signals.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_attach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Attach a CTI input trigger to a CTM channel.
+Description:	(Write) Attach a CTI input trigger to a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_detach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Detach a CTI input trigger from a CTM channel.
+Description:	(Write) Detach a CTI input trigger from a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_attach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Attach a CTI output trigger to a CTM channel.
+Description:	(Write) Attach a CTI output trigger to a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_detach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Detach a CTI output trigger from a CTM channel.
+Description:	(Write) Detach a CTI output trigger from a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_enable
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(RW) Enable CTIGATE for single channel (W) or list enabled
+Description:	(RW) Enable CTIGATE for single channel (Write) or list enabled
 		channels through the gate (R).
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_disable
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Disable CTIGATE for single channel.
+Description:	(Write) Disable CTIGATE for single channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_set
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Activate a single channel.
+Description:	(Write) Activate a single channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_clear
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Deactivate a single channel.
+Description:	(Write) Deactivate a single channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_pulse
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Pulse a single channel - activate for a single clock cycle.
+Description:	(Write) Pulse a single channel - activate for a single clock cycle.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_filtered
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) List of output triggers filtered across all connections.
+Description:	(Read) List of output triggers filtered across all connections.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trig_filter_enable
 Date:		March 2020
@@ -205,13 +205,13 @@ What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_inuse
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) show channels with at least one attached trigger signal.
+Description:	(Read) show channels with at least one attached trigger signal.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_free
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) show channels with no attached trigger signals.
+Description:	(Read) show channels with no attached trigger signals.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_sel
 Date:		March 2020
@@ -224,18 +224,18 @@ What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_in
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Read to see input triggers connected to selected view
+Description:	(Read) Read to see input triggers connected to selected view
 		channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_out
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Read to see output triggers connected to selected view
+Description:	(Read) Read to see output triggers connected to selected view
 		channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_reset
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Clear all channel / trigger programming.
+Description:	(Write) Clear all channel / trigger programming.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
index b5f526081711..9a383f6a74eb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
@@ -4,7 +4,10 @@ KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Add/remove a sink from a trace path.  There can be multiple
 		source for a single sink.
-		ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
+
+		ex::
+
+		  echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
 Date:		November 2014
@@ -20,21 +23,21 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Defines the depth, in words, of the trace RAM in powers of
+Description:	(Read) Defines the depth, in words, of the trace RAM in powers of
 		2.  The value is read directly from HW register RDP, 0x004.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB status register.  The value
+Description:	(Read) Shows the value held by the ETB status register.  The value
 		is read directly from HW register STS, 0x00C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB RAM Read Pointer register
+Description:	(Read) Shows the value held by the ETB RAM Read Pointer register
 		that is used to read entries from the Trace RAM over the APB
 		interface.  The value is read directly from HW register RRP,
 		0x014.
@@ -43,7 +46,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB RAM Write Pointer register
+Description:	(Read) Shows the value held by the ETB RAM Write Pointer register
 		that is used to sets the write pointer to write entries from
 		the CoreSight bus into the Trace RAM. The value is read directly
 		from HW register RWP, 0x018.
@@ -52,21 +55,21 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Similar to "trigger_cntr" above except that this value is
+Description:	(Read) Similar to "trigger_cntr" above except that this value is
 		read directly from HW register TRG, 0x01C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB Control register. The value
+Description:	(Read) Shows the value held by the ETB Control register. The value
 		is read directly from HW register CTL, 0x020.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB Formatter and Flush Status
+Description:	(Read) Shows the value held by the ETB Formatter and Flush Status
 		register.  The value is read directly from HW register FFSR,
 		0x300.
 
@@ -74,6 +77,6 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB Formatter and Flush Control
+Description:	(Read) Shows the value held by the ETB Formatter and Flush Control
 		register.  The value is read directly from HW register FFCR,
 		0x304.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index 924265a1295d..651602a61eac 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -146,28 +146,28 @@ What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_addr_cmp
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Provides the number of address comparators pairs accessible
+Description: 	(Read) Provides the number of address comparators pairs accessible
 		on a trace unit, as specified by bit 3:0 of register ETMCCR.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_cntr
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Provides the number of counters accessible on a trace unit,
+Description: 	(Read) Provides the number of counters accessible on a trace unit,
 		as specified by bit 15:13 of register ETMCCR.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_ctxid_cmp
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Provides the number of context ID comparator available on a
+Description: 	(Read) Provides the number of context ID comparator available on a
 		trace unit, as specified by bit 25:24 of register ETMCCR.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/reset
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(W) Cancels all configuration on a trace unit and set it back
+Description: 	(Write) Cancels all configuration on a trace unit and set it back
 		to its boot configuration.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_12_event
@@ -216,7 +216,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/curr_seq_state
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Holds the current state of the sequencer.
+Description: 	(Read) Holds the current state of the sequencer.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/sync_freq
 Date:		November 2014
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 614874e2cf53..881f0cd99ce4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -12,75 +12,75 @@ What:		/sys/bus/coresight/devices/etm<N>/cpu
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) The CPU this tracing entity is associated with.
+Description:	(Read) The CPU this tracing entity is associated with.
 
 What:		/sys/bus/coresight/devices/etm<N>/nr_pe_cmp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of PE comparator inputs that are
+Description:	(Read) Indicates the number of PE comparator inputs that are
 		available for tracing.
 
 What:		/sys/bus/coresight/devices/etm<N>/nr_addr_cmp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of address comparator pairs that are
+Description:	(Read) Indicates the number of address comparator pairs that are
 		available for tracing.
 
 What:		/sys/bus/coresight/devices/etm<N>/nr_cntr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of counters that are available for
+Description:	(Read) Indicates the number of counters that are available for
 		tracing.
 
 What:		/sys/bus/coresight/devices/etm<N>/nr_ext_inp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates how many external inputs are implemented.
+Description:	(Read) Indicates how many external inputs are implemented.
 
 What:		/sys/bus/coresight/devices/etm<N>/numcidc
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of Context ID comparators that are
+Description:	(Read) Indicates the number of Context ID comparators that are
 		available for tracing.
 
 What:		/sys/bus/coresight/devices/etm<N>/numvmidc
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of VMID comparators that are available
+Description:	(Read) Indicates the number of VMID comparators that are available
 		for tracing.
 
 What:		/sys/bus/coresight/devices/etm<N>/nrseqstate
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of sequencer states that are
+Description:	(Read) Indicates the number of sequencer states that are
 		implemented.
 
 What:		/sys/bus/coresight/devices/etm<N>/nr_resource
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of resource selection pairs that are
+Description:	(Read) Indicates the number of resource selection pairs that are
 		available for tracing.
 
 What:		/sys/bus/coresight/devices/etm<N>/nr_ss_cmp
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the number of single-shot comparator controls that
+Description:	(Read) Indicates the number of single-shot comparator controls that
 		are available for tracing.
 
 What:		/sys/bus/coresight/devices/etm<N>/reset
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(W) Cancels all configuration on a trace unit and set it back
+Description: 	(Write) Cancels all configuration on a trace unit and set it back
 		to its boot configuration.
 
 What:		/sys/bus/coresight/devices/etm<N>/mode
@@ -300,7 +300,7 @@ What:		/sys/bus/coresight/devices/etm<N>/addr_cmp_view
 Date:		December 2019
 KernelVersion:	5.5
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the current settings for the selected address
+Description:	(Read) Print the current settings for the selected address
 		comparator.
 
 What:		/sys/bus/coresight/devices/etm<N>/sshot_idx
@@ -319,7 +319,7 @@ What:		/sys/bus/coresight/devices/etm<N>/sshot_status
 Date:		December 2019
 KernelVersion:	5.5
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the current value of the selected single shot
+Description:	(Read) Print the current value of the selected single shot
 		status register.
 
 What:		/sys/bus/coresight/devices/etm<N>/sshot_pe_ctrl
@@ -333,111 +333,111 @@ What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcoslsr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the OS Lock Status Register (0x304).
+Description:	(Read) Print the content of the OS Lock Status Register (0x304).
 		The value it taken directly  from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpdcr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Power Down Control Register
+Description:	(Read) Print the content of the Power Down Control Register
 		(0x310).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpdsr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Power Down Status Register
+Description:	(Read) Print the content of the Power Down Status Register
 		(0x314).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trclsr
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the SW Lock Status Register
+Description:	(Read) Print the content of the SW Lock Status Register
 		(0xFB4).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcauthstatus
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Authentication Status Register
+Description:	(Read) Print the content of the Authentication Status Register
 		(0xFB8).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcdevid
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Device ID Register
+Description:	(Read) Print the content of the Device ID Register
 		(0xFC8).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcdevtype
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Device Type Register
+Description:	(Read) Print the content of the Device Type Register
 		(0xFCC).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr0
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Peripheral ID0 Register
+Description:	(Read) Print the content of the Peripheral ID0 Register
 		(0xFE0).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr1
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Peripheral ID1 Register
+Description:	(Read) Print the content of the Peripheral ID1 Register
 		(0xFE4).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr2
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Peripheral ID2 Register
+Description:	(Read) Print the content of the Peripheral ID2 Register
 		(0xFE8).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcpidr3
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the Peripheral ID3 Register
+Description:	(Read) Print the content of the Peripheral ID3 Register
 		(0xFEC).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trcconfig
 Date:		February 2016
 KernelVersion:	4.07
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the trace configuration register
+Description:	(Read) Print the content of the trace configuration register
 		(0x010) as currently set by SW.
 
 What:		/sys/bus/coresight/devices/etm<N>/mgmt/trctraceid
 Date:		February 2016
 KernelVersion:	4.07
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Print the content of the trace ID register (0x040).
+Description:	(Read) Print the content of the trace ID register (0x040).
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr0
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the tracing capabilities of the trace unit (0x1E0).
+Description:	(Read) Returns the tracing capabilities of the trace unit (0x1E0).
 		The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr1
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the tracing capabilities of the trace unit (0x1E4).
+Description:	(Read) Returns the tracing capabilities of the trace unit (0x1E4).
 		The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr2
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the maximum size of the data value, data address,
+Description:	(Read) Returns the maximum size of the data value, data address,
 		VMID, context ID and instuction address in the trace unit
 		(0x1E8).  The value is taken directly from the HW.
 
@@ -445,7 +445,7 @@ What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr3
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the value associated with various resources
+Description:	(Read) Returns the value associated with various resources
 		available to the trace unit.  See the Trace Macrocell
 		architecture specification for more details (0x1E8).
 		The value is taken directly from the HW.
@@ -454,42 +454,42 @@ What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr4
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns how many resources the trace unit supports (0x1F0).
+Description:	(Read) Returns how many resources the trace unit supports (0x1F0).
 		The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr5
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns how many resources the trace unit supports (0x1F4).
+Description:	(Read) Returns how many resources the trace unit supports (0x1F4).
 		The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr8
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the maximum speculation depth of the instruction
+Description:	(Read) Returns the maximum speculation depth of the instruction
 		trace stream. (0x180).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr9
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the number of P0 right-hand keys that the trace unit
+Description:	(Read) Returns the number of P0 right-hand keys that the trace unit
 		can use (0x184).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr10
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the number of P1 right-hand keys that the trace unit
+Description:	(Read) Returns the number of P1 right-hand keys that the trace unit
 		can use (0x188).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr11
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the number of special P1 right-hand keys that the
+Description:	(Read) Returns the number of special P1 right-hand keys that the
 		trace unit can use (0x18C).  The value is taken directly from
 		the HW.
 
@@ -497,7 +497,7 @@ What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr12
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the number of conditional P1 right-hand keys that
+Description:	(Read) Returns the number of conditional P1 right-hand keys that
 		the trace unit can use (0x190).  The value is taken directly
 		from the HW.
 
@@ -505,6 +505,6 @@ What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr13
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Returns the number of special conditional P1 right-hand keys
+Description:	(Read) Returns the number of special conditional P1 right-hand keys
 		that the trace unit can use (0x194).  The value is taken
 		directly from the HW.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
index 1dffabe7f48d..53e1f4815d64 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
@@ -42,7 +42,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.stm/status
 Date:		April 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) List various control and status registers.  The specific
+Description:	(Read) List various control and status registers.  The specific
 		layout and content is driver specific.
 
 What:		/sys/bus/coresight/devices/<memory_map>.stm/traceid
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
index ab49b9ac3bcb..6aa527296c71 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
@@ -11,21 +11,21 @@ What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz
 Date:           March 2016
 KernelVersion:  4.7
 Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:    (R) Defines the size, in 32-bit words, of the local RAM buffer.
+Description:    (Read) Defines the size, in 32-bit words, of the local RAM buffer.
                 The value is read directly from HW register RSZ, 0x004.
 
 What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts
 Date:           March 2016
 KernelVersion:  4.7
 Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC status register.  The value
+Description:	(Read) Shows the value held by the TMC status register.  The value
                 is read directly from HW register STS, 0x00C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC RAM Read Pointer register
+Description:	(Read) Shows the value held by the TMC RAM Read Pointer register
 		that is used to read entries from the Trace RAM over the APB
 		interface.  The value is read directly from HW register RRP,
 		0x014.
@@ -34,7 +34,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC RAM Write Pointer register
+Description:	(Read) Shows the value held by the TMC RAM Write Pointer register
 		that is used to sets the write pointer to write entries from
 		the CoreSight bus into the Trace RAM. The value is read directly
 		from HW register RWP, 0x018.
@@ -43,21 +43,21 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Similar to "trigger_cntr" above except that this value is
+Description:	(Read) Similar to "trigger_cntr" above except that this value is
 		read directly from HW register TRG, 0x01C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Control register. The value
+Description:	(Read) Shows the value held by the TMC Control register. The value
 		is read directly from HW register CTL, 0x020.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Formatter and Flush Status
+Description:	(Read) Shows the value held by the TMC Formatter and Flush Status
 		register.  The value is read directly from HW register FFSR,
 		0x300.
 
@@ -65,7 +65,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Formatter and Flush Control
+Description:	(Read) Shows the value held by the TMC Formatter and Flush Control
 		register.  The value is read directly from HW register FFCR,
 		0x304.
 
@@ -73,7 +73,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Mode register, which
+Description:	(Read) Shows the value held by the TMC Mode register, which
 		indicate the mode the device has been configured to enact.  The
 		The value is read directly from the MODE register, 0x028.
 
@@ -81,7 +81,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the capabilities of the Coresight TMC.
+Description:	(Read) Indicates the capabilities of the Coresight TMC.
 		The value is read directly from the DEVID register, 0xFC8,
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/buffer_size
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-css linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-css
index 966f8504bd7b..12a733fe357f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-css
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-css
@@ -20,6 +20,7 @@ Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
 Description:	Contains the ids of the channel paths used by this
 		subchannel, as reported by the channel subsystem
 		during subchannel recognition.
+
 		Note: This is an I/O-subchannel specific attribute.
 Users:		s390-tools, HAL
 
@@ -31,6 +32,7 @@ Description:	Contains the PIM/PAM/POM values, as reported by the
 		channel subsystem when last queried by the common I/O
 		layer (this implies that this attribute is not necessarily
 		in sync with the values current in the channel subsystem).
+
 		Note: This is an I/O-subchannel specific attribute.
 Users:		s390-tools, HAL
 
@@ -53,6 +55,7 @@ Description:	This file allows the driver for a device to be specified. When
 		opt-out of driver binding using a driver_override name such as
 		"none".  Only a single driver may be specified in the override,
 		there is no support for parsing delimiters.
+
 		Note that unlike the mechanism of the same name for pci, this
 		file does not allow to override basic matching rules. I.e.,
 		the driver must still match the subchannel type of the device.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-dfl linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-dfl
new file mode 100644
index 000000000000..b0265ab17200
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-dfl
@@ -0,0 +1,17 @@
+What:		/sys/bus/dfl/devices/dfl_dev.X/type
+Date:		Aug 2020
+KernelVersion:	5.10
+Contact:	Xu Yilun <yilun.xu@intel.com>
+Description:	Read-only. It returns type of DFL FIU of the device. Now DFL
+		supports 2 FIU types, 0 for FME, 1 for PORT.
+
+		Format: 0x%x
+
+What:		/sys/bus/dfl/devices/dfl_dev.X/feature_id
+Date:		Aug 2020
+KernelVersion:	5.10
+Contact:	Xu Yilun <yilun.xu@intel.com>
+Description:	Read-only. It returns feature identifier local to its DFL FIU
+		type.
+
+		Format: 0x%x
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
index c9278a3b3df1..63a32ddcb95e 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
@@ -8,13 +8,13 @@ Description:	Read-only. Attribute group to describe the magic bits
 
 		Each attribute under this group defines a bit range of the
 		perf_event_attr.config. All supported attributes are listed
-		below.
+		below::
 
 		    event  = "config:0-11"  - event ID
 		    evtype = "config:12-15" - event type
 		    portid = "config:16-23" - event source
 
-		For example,
+		For example::
 
 		    fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
 
@@ -40,11 +40,11 @@ Description:	Read-only. Attribute group to describe performance monitoring
 
 		All supported performance monitoring events are listed below.
 
-		Basic events (evtype=0x00)
+		Basic events (evtype=0x00)::
 
 		    clock = "event=0x00,evtype=0x00,portid=0xff"
 
-		Cache events (evtype=0x01)
+		Cache events (evtype=0x01)::
 
 		    cache_read_hit      = "event=0x00,evtype=0x01,portid=0xff"
 		    cache_read_miss     = "event=0x01,evtype=0x01,portid=0xff"
@@ -59,7 +59,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    cache_rx_req_stall  = "event=0x09,evtype=0x01,portid=0xff"
 		    cache_eviction      = "event=0x0a,evtype=0x01,portid=0xff"
 
-		Fabric events (evtype=0x02)
+		Fabric events (evtype=0x02)::
 
 		    fab_pcie0_read       = "event=0x00,evtype=0x02,portid=0xff"
 		    fab_pcie0_write      = "event=0x01,evtype=0x02,portid=0xff"
@@ -78,7 +78,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    fab_port_mmio_read   = "event=0x06,evtype=0x02,portid=?"
 		    fab_port_mmio_write  = "event=0x07,evtype=0x02,portid=?"
 
-		VTD events (evtype=0x03)
+		VTD events (evtype=0x03)::
 
 		    vtd_port_read_transaction  = "event=0x00,evtype=0x03,portid=?"
 		    vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?"
@@ -88,7 +88,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    vtd_port_devtlb_2m_fill    = "event=0x05,evtype=0x03,portid=?"
 		    vtd_port_devtlb_1g_fill    = "event=0x06,evtype=0x03,portid=?"
 
-		VTD SIP events (evtype=0x04)
+		VTD SIP events (evtype=0x04)::
 
 		    vtd_sip_iotlb_4k_hit  = "event=0x00,evtype=0x04,portid=0xff"
 		    vtd_sip_iotlb_2m_hit  = "event=0x01,evtype=0x04,portid=0xff"
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-format linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
index 5bb793ec926c..df7ccc1b2fba 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
@@ -10,7 +10,8 @@ Description:
 		name/value pairs.
 
 		Userspace must be prepared for the possibility that attributes
-		define overlapping bit ranges. For example:
+		define overlapping bit ranges. For example::
+
 			attr1 = 'config:0-23'
 			attr2 = 'config:0-7'
 			attr3 = 'config:12-35'
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
index e82fc37be802..de390a010af8 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
@@ -1,3 +1,28 @@
+What:           /sys/bus/event_source/devices/hv_24x7/format
+Date:           September 2020
+Contact:        Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:    Read-only. Attribute group to describe the magic bits
+                that go into perf_event_attr.config for a particular pmu.
+                (See ABI/testing/sysfs-bus-event_source-devices-format).
+
+                Each attribute under this group defines a bit range of the
+                perf_event_attr.config. All supported attributes are listed
+                below::
+
+				chip = "config:16-31"
+				core  = "config:16-31"
+				domain = "config:0-3"
+				lpar = "config:0-15"
+				offset = "config:32-63"
+				vcpu = "config:16-31"
+
+                For example::
+
+		  PM_PB_CYC =  "domain=1,offset=0x80,chip=?,lpar=0x0"
+
+		In this event, '?' after chip specifies that
+		this value will be provided by user while running this event.
+
 What:		/sys/bus/event_source/devices/hv_24x7/interface/catalog
 Date:		February 2014
 Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
index 3ca4e554d2f9..12e2bf92783f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
@@ -1,3 +1,34 @@
+What:           /sys/bus/event_source/devices/hv_gpci/format
+Date:           September 2020
+Contact:        Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:    Read-only. Attribute group to describe the magic bits
+                that go into perf_event_attr.config for a particular pmu.
+                (See ABI/testing/sysfs-bus-event_source-devices-format).
+
+                Each attribute under this group defines a bit range of the
+                perf_event_attr.config. All supported attributes are listed
+                below::
+
+				counter_info_version  = "config:16-23"
+				length  = "config:24-31"
+				partition_id  = "config:32-63"
+				request = "config:0-31"
+				sibling_part_id = "config:32-63"
+				hw_chip_id = "config:32-63"
+				offset = "config:32-63"
+				phys_processor_idx = "config:32-63"
+				secondary_index = "config:0-15"
+				starting_index = "config:32-63"
+
+                For example::
+
+		  processor_core_utilization_instructions_completed = "request=0x94,
+					phys_processor_idx=?,counter_info_version=0x8,
+					length=8,offset=0x18"
+
+		In this event, '?' after phys_processor_idx specifies this value
+		this value will be provided by user while running this event.
+
 What:		/sys/bus/event_source/devices/hv_gpci/interface/collect_privileged
 Date:		February 2014
 Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
@@ -5,6 +36,7 @@ Description:
 		'0' if the hypervisor is configured to forbid access to event
 		counters being accumulated by other guests and to physical
 		domain event counters.
+
 		'1' if that access is allowed.
 
 What:		/sys/bus/event_source/devices/hv_gpci/interface/ga
@@ -41,3 +73,10 @@ Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
 Description:
 		A number indicating the latest version of the gpci interface
 		that the kernel is aware of.
+
+What:		/sys/devices/hv_gpci/cpumask
+Date:		October 2020
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:	read only
+		This sysfs file exposes the cpumask which is designated to make
+		HCALLs to retrieve hv-gpci pmu event counter data.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-fcoe linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-fcoe
index 657df13b100d..8fe787cc4ab7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-fcoe
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -3,16 +3,19 @@ Date:		August 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
 Description:	The FCoE bus. Attributes in this directory are control interfaces.
+
 Attributes:
 
-	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+	ctlr_create:
+		     'FCoE Controller' instance creation interface. Writing an
 		     <ifname> to this file will allocate and populate sysfs with a
 		     fcoe_ctlr_device (ctlr_X). The user can then configure any
 		     per-port settings and finally write to the fcoe_ctlr_device's
 		     'start' attribute to begin the kernel's discovery and login
 		     process.
 
-	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+	ctlr_destroy:
+		       'FCoE Controller' instance removal interface. Writing a
 		       fcoe_ctlr_device's sysfs name to this file will log the
 		       fcoe_ctlr_device out of the fabric or otherwise connected
 		       FCoE devices. It will also free all kernel memory allocated
@@ -32,11 +35,13 @@ Description:	'FCoE Controller' instances on the fcoe bus.
 
 Attributes:
 
-	fcf_dev_loss_tmo: Device loss timeout period (see below). Changing
+	fcf_dev_loss_tmo:
+			  Device loss timeout period (see below). Changing
 			  this value will change the dev_loss_tmo for all
 			  FCFs discovered by this controller.
 
-	mode:		  Display or change the FCoE Controller's mode. Possible
+	mode:
+			  Display or change the FCoE Controller's mode. Possible
 			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
 			  is started in 'Fabric' mode then FIP FCF discovery is
 			  initiated and ultimately a fabric login is attempted.
@@ -44,23 +49,30 @@ Attributes:
 			  FIP VN2VN discovery and login is performed. A FCoE
 			  Controller only supports one mode at a time.
 
-	enabled:	  Whether an FCoE controller is enabled or disabled.
+	enabled:
+			  Whether an FCoE controller is enabled or disabled.
 			  0 if disabled, 1 if enabled. Writing either 0 or 1
 			  to this file will enable or disable the FCoE controller.
 
-	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
+	lesb/link_fail:
+			  Link Error Status Block (LESB) link failure count.
 
-	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
+	lesb/vlink_fail:
+		          Link Error Status Block (LESB) virtual link
 			  failure count.
 
-	lesb/miss_fka:    Link Error Status Block (LESB) missed FCoE
+	lesb/miss_fka:
+			  Link Error Status Block (LESB) missed FCoE
 			  Initialization Protocol (FIP) Keep-Alives (FKA).
 
-	lesb/symb_err:    Link Error Status Block (LESB) symbolic error count.
+	lesb/symb_err:
+			  Link Error Status Block (LESB) symbolic error count.
 
-	lesb/err_block:   Link Error Status Block (LESB) block error count.
+	lesb/err_block:
+			  Link Error Status Block (LESB) block error count.
 
-	lesb/fcs_error:   Link Error Status Block (LESB) Fibre Channel
+	lesb/fcs_error:
+			  Link Error Status Block (LESB) Fibre Channel
 			  Services error count.
 
 Notes: ctlr_X (global increment starting at 0)
@@ -75,31 +87,41 @@ Description:	'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
 		Fibre Channel frames into a FC fabric. It can also take
 		outbound FC frames and pack them in Ethernet packets to
 		be sent to their destination on the Ethernet segment.
+
 Attributes:
 
-	fabric_name: Identifies the fabric that the FCF services.
+	fabric_name:
+		     Identifies the fabric that the FCF services.
 
-	switch_name: Identifies the FCF.
+	switch_name:
+		     Identifies the FCF.
 
-	priority:    The switch's priority amongst other FCFs on the same
+	priority:
+		     The switch's priority amongst other FCFs on the same
 		     fabric.
 
-	selected:    1 indicates that the switch has been selected for use;
+	selected:
+		     1 indicates that the switch has been selected for use;
 		     0 indicates that the switch will not be used.
 
-	fc_map:      The Fibre Channel MAP
+	fc_map:
+		     The Fibre Channel MAP
 
-	vfid:	     The Virtual Fabric ID
+	vfid:
+		     The Virtual Fabric ID
 
-	mac:         The FCF's MAC address
+	mac:
+		     The FCF's MAC address
 
-	fka_period:  The FIP Keep-Alive period
+	fka_period:
+		     The FIP Keep-Alive period
 
 	fabric_state: The internal kernel state
-		      "Unknown" - Initialization value
-		      "Disconnected" - No link to the FCF/fabric
-		      "Connected" - Host is connected to the FCF
-		      "Deleted" - FCF is being removed from the system
+
+		      - "Unknown" - Initialization value
+		      - "Disconnected" - No link to the FCF/fabric
+		      - "Connected" - Host is connected to the FCF
+		      - "Deleted" - FCF is being removed from the system
 
 	dev_loss_tmo: The device loss timeout period for this FCF.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-fsi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-fsi
index 320697bdf41d..d148214181a1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-fsi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-fsi
@@ -36,3 +36,11 @@ Contact:        linux-fsi@lists.ozlabs.org
 Description:
 		Provides a means of reading/writing a 32 bit value from/to a
 		specified FSI bus address.
+
+What:           /sys/bus/platform/devices/../cfam_reset
+Date:		Sept 2020
+KernelVersion:  5.10
+Contact:        linux-fsi@lists.ozlabs.org
+Description:
+		Provides a means of resetting the cfam that is attached to the
+		FSI device.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-fsl-mc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-fsl-mc
index 80256b8b4f26..bf3c6af6ad89 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-fsl-mc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-fsl-mc
@@ -6,8 +6,10 @@ Description:
 		the driver to attempt to bind to the device found at
 		this location. The format for the location is Object.Id
 		and is the same as found in /sys/bus/fsl-mc/devices/.
-                For example:
-		# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
+
+                For example::
+
+		  # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
 
 What:		/sys/bus/fsl-mc/drivers/.../unbind
 Date:		December 2016
@@ -17,5 +19,7 @@ Description:
 		driver to attempt to unbind from the device found at
 		this location. The format for the location is Object.Id
 		and is the same as found in /sys/bus/fsl-mc/devices/.
-                For example:
-		# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
+
+                For example::
+
+		  # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
index 9de269bb0ae5..42dfc9399d2d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
@@ -3,19 +3,25 @@ Date:		February 2011
 Contact:	Minkyu Kang <mk7.kang@samsung.com>
 Description:
 		show what device is attached
-		NONE - no device
-		USB - USB device is attached
-		UART - UART is attached
-		CHARGER - Charger is attaced
-		JIG - JIG is attached
+
+		=======  ======================
+		NONE     no device
+		USB      USB device is attached
+		UART     UART is attached
+		CHARGER  Charger is attaced
+		JIG      JIG is attached
+		=======  ======================
 
 What:		/sys/bus/i2c/devices/.../switch
 Date:		February 2011
 Contact:	Minkyu Kang <mk7.kang@samsung.com>
 Description:
 		show or set the state of manual switch
-		VAUDIO - switch to VAUDIO path
-		UART - switch to UART path
-		AUDIO - switch to AUDIO path
-		DHOST - switch to DHOST path
-		AUTO - switch automatically by device
+
+		=======  ==============================
+		VAUDIO   switch to VAUDIO path
+		UART     switch to UART path
+		AUDIO    switch to AUDIO path
+		DHOST    switch to DHOST path
+		AUTO     switch automatically by device
+		=======  ==============================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x
index 0b0de8cd0d13..b6c69eb80ca4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x
@@ -6,15 +6,18 @@ Description:
 		Value that exists only for mux devices that can be
 		written to control the behaviour of the multiplexer on
 		idle. Possible values:
-		-2 - disconnect on idle, i.e. deselect the last used
-		     channel, which is useful when there is a device
-		     with an address that conflicts with another
-		     device on another mux on the same parent bus.
-		-1 - leave the mux as-is, which is the most optimal
-		     setting in terms of I2C operations and is the
-		     default mode.
-		0..<nchans> - set the mux to a predetermined channel,
-		     which is useful if there is one channel that is
-		     used almost always, and you want to reduce the
-		     latency for normal operations after rare
-		     transactions on other channels
+
+		===========  ===============================================
+		-2	     disconnect on idle, i.e. deselect the last used
+			     channel, which is useful when there is a device
+			     with an address that conflicts with another
+			     device on another mux on the same parent bus.
+		-1	     leave the mux as-is, which is the most optimal
+			     setting in terms of I2C operations and is the
+			     default mode.
+		0..<nchans>  set the mux to a predetermined channel,
+			     which is useful if there is one channel that is
+			     used almost always, and you want to reduce the
+			     latency for normal operations after rare
+			     transactions on other channels
+		===========  ===============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-i3c linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-i3c
index 2f332ec36f82..1f4a2662335b 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-i3c
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-i3c
@@ -84,6 +84,7 @@ Description:
 		by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
 		See the I3C specification for more details about these HDR
 		modes.
+
 		This entry describes the HDRCAP of the master controller
 		driving the bus.
 
@@ -135,6 +136,7 @@ Description:
 		Expose the HDR (High Data Rate) capabilities of a device.
 		Returns a list of supported HDR mode, each element is separated
 		by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
+
 		See the I3C specification for more details about these HDR
 		modes.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio
index 5c62bfb0f3f5..df42bed09f25 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio
@@ -15,6 +15,7 @@ Description:
 		based on hardware generated events (e.g. data ready) or
 		provided by a separate driver for other hardware (e.g.
 		periodic timer, GPIO or high resolution timer).
+
 		Contains trigger type specific elements. These do not
 		generalize well and hence are not documented in this file.
 		X is the IIO index of the trigger.
@@ -40,6 +41,7 @@ Description:
 		buffered samples and events for device X.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
 KernelVersion:	2.6.35
@@ -49,12 +51,13 @@ Description:
 		resulting sampling frequency.  In many devices this
 		parameter has an effect on input filters etc. rather than
 		simply controlling when the input is sampled.  As this
-		effects data ready triggers, hardware buffers and the sysfs
+		affects data ready triggers, hardware buffers and the sysfs
 		direct access interfaces, it may be found in any of the
-		relevant directories.  If it effects all of the above
+		relevant directories.  If it affects all of the above
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
@@ -63,6 +66,7 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		When the internal sampling clock can only take a specific set of
 		frequencies, we can specify the available values with:
+
 		- a small discrete set of values like "0 2 4 6 8"
 		- a range with minimum, step and maximum frequencies like
 		  "[min step max]"
@@ -374,6 +378,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -401,21 +408,21 @@ Description:
 		Hardware applied calibration offset (assumed to fix production
 		inaccuracies).
 
-What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
-what		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
-what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
@@ -483,7 +490,8 @@ Description:
 		If a discrete set of scale values is available, they
 		are listed in this attribute.
 
-What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
@@ -494,6 +502,13 @@ Description:
 		Hardware applied gain factor. If shared across all channels,
 		<type>_hardwaregain is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
+KernelVersion:	5.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available hardware applied gain factors. Shared across all
+		channels.
+
 What:		/sys/.../in_accel_filter_low_pass_3db_frequency
 What:		/sys/.../in_magn_filter_low_pass_3db_frequency
 What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
@@ -652,6 +667,7 @@ Description:
 		<type>[Y][_name]_<raw|input>_thresh_falling_value may take
 		different values, but the device can only enable both thresholds
 		or neither.
+
 		Note the driver will assume the last p events requested are
 		to be enabled where p is how many it supports (which may vary
 		depending on the exact set requested. So if you want to be
@@ -706,6 +722,7 @@ Description:
 		<type>[Y][_name]_<raw|input>_roc_falling_value may take
 		different values, but the device can only enable both rate of
 		change thresholds or neither.
+
 		Note the driver will assume the last p events requested are
 		to be enabled where p is however many it supports (which may
 		vary depending on the exact set requested. So if you want to be
@@ -750,9 +767,9 @@ What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
 What:		/sys/.../events/in_tempY_raw_thresh_rising_value
 What:		/sys/.../events/in_tempY_raw_thresh_falling_value
 What:		/sys/.../events/in_illuminance0_thresh_falling_value
-what:		/sys/.../events/in_illuminance0_thresh_rising_value
-what:		/sys/.../events/in_proximity0_thresh_falling_value
-what:		/sys/.../events/in_proximity0_thresh_rising_value
+What:		/sys/.../events/in_illuminance0_thresh_rising_value
+What:		/sys/.../events/in_proximity0_thresh_falling_value
+What:		/sys/.../events/in_proximity0_thresh_rising_value
 What:		/sys/.../events/in_illuminance_thresh_rising_value
 What:		/sys/.../events/in_illuminance_thresh_falling_value
 KernelVersion:	2.6.37
@@ -761,9 +778,11 @@ Description:
 		Specifies the value of threshold that the device is comparing
 		against for the events enabled by
 		<type>Y[_name]_thresh[_rising|falling]_en.
+
 		If separate attributes exist for the two directions, but
 		direction is not specified for this attribute, then a single
 		threshold value applies to both directions.
+
 		The raw or input element of the name indicates whether the
 		value is in raw device units or in processed units (as _raw
 		and _input do on sysfs direct channel read attributes).
@@ -832,11 +851,11 @@ What:		/sys/.../events/in_tempY_thresh_rising_hysteresis
 What:		/sys/.../events/in_tempY_thresh_falling_hysteresis
 What:		/sys/.../events/in_tempY_thresh_either_hysteresis
 What:		/sys/.../events/in_illuminance0_thresh_falling_hysteresis
-what:		/sys/.../events/in_illuminance0_thresh_rising_hysteresis
-what:		/sys/.../events/in_illuminance0_thresh_either_hysteresis
-what:		/sys/.../events/in_proximity0_thresh_falling_hysteresis
-what:		/sys/.../events/in_proximity0_thresh_rising_hysteresis
-what:		/sys/.../events/in_proximity0_thresh_either_hysteresis
+What:		/sys/.../events/in_illuminance0_thresh_rising_hysteresis
+What:		/sys/.../events/in_illuminance0_thresh_either_hysteresis
+What:		/sys/.../events/in_proximity0_thresh_falling_hysteresis
+What:		/sys/.../events/in_proximity0_thresh_rising_hysteresis
+What:		/sys/.../events/in_proximity0_thresh_either_hysteresis
 KernelVersion:	3.13
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -846,6 +865,7 @@ Description:
 		If separate attributes exist for the two directions, but
 		direction is not specified for this attribute, then a single
 		hysteresis value applies to both directions.
+
 		For falling events the hysteresis is added to the _value attribute for
 		this event to get the upper threshold for when the event goes back to
 		normal, for rising events the hysteresis is subtracted from the _value
@@ -892,6 +912,7 @@ Description:
 		Specifies the value of rate of change threshold that the
 		device is comparing against for the events enabled by
 		<type>[Y][_name]_roc[_rising|falling]_en.
+
 		If separate attributes exist for the two directions,
 		but direction is not specified for this attribute,
 		then a single threshold value applies to both directions.
@@ -1013,7 +1034,7 @@ What:		/sys/.../events/in_activity_running_thresh_falling_en
 KernelVersion:	3.19
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Enables or disables activitity events. Depending on direction
+		Enables or disables activity events. Depending on direction
 		an event is generated when sensor ENTERS or LEAVES a given state.
 
 What:		/sys/.../events/in_activity_still_thresh_rising_value
@@ -1291,6 +1312,7 @@ Description:
 		Proximity measurement indicating that some
 		object is near the sensor, usually by observing
 		reflectivity of infrared or ultrasound emitted.
+
 		Often these sensors are unit less and as such conversion
 		to SI units is not possible. Higher proximity measurements
 		indicate closer objects, and vice versa. Units after
@@ -1333,6 +1355,7 @@ Description:
 		standardised CIE Erythemal Action Spectrum. UV index values range
 		from 0 (low) to >=11 (extreme).
 
+What:		/sys/.../iio:deviceX/in_intensity_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
 What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
@@ -1342,7 +1365,8 @@ KernelVersion:	3.12
 Contact:	linux-iio@vger.kernel.org
 Description:
 		This attribute is used to get/set the integration time in
-		seconds.
+		seconds. If shared across all channels of a given type,
+		<type>_integration_time is used.
 
 What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
 KernelVersion:	4.0
@@ -1434,9 +1458,12 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		A single positive integer specifying the maximum number of scan
 		elements to wait for.
+
 		Poll will block until the watermark is reached.
+
 		Blocking read will wait until the minimum between the requested
 		read amount or the low water mark is available.
+
 		Non-blocking read will retrieve the available samples from the
 		buffer even if there are less samples then watermark level. This
 		allows the application to block on poll with a timeout and read
@@ -1465,11 +1492,13 @@ Description:
 		device settings allows it (e.g. if a trigger is set that samples
 		data differently that the hardware fifo does then hardware fifo
 		will not enabled).
+
 		If the hardware fifo is enabled and the level of the hardware
 		fifo reaches the hardware fifo watermark level the device will
 		flush its hardware fifo to the device buffer. Doing a non
 		blocking read on the device when no samples are present in the
 		device buffer will also force a flush.
+
 		When the hardware fifo is enabled there is no need to use a
 		trigger to use buffer mode since the watermark settings
 		guarantees that the hardware fifo is flushed to the device
@@ -1507,6 +1536,7 @@ Description:
 		A single positive integer specifying the minimum watermark level
 		for the hardware fifo of this device. If the device does not
 		have a hardware fifo this entry is not present.
+
 		If the user sets buffer/watermark to a value less than this one,
 		then the hardware watermark will remain unset.
 
@@ -1517,6 +1547,7 @@ Description:
 		A single positive integer specifying the maximum watermark level
 		for the hardware fifo of this device. If the device does not
 		have a hardware fifo this entry is not present.
+
 		If the user sets buffer/watermark to a value greater than this
 		one, then the hardware watermark will be capped at this value.
 
@@ -1528,6 +1559,7 @@ Description:
 		levels for the hardware fifo. This entry is optional and if it
 		is not present it means that all the values between
 		hwfifo_watermark_min and hwfifo_watermark_max are supported.
+
 		If the user sets buffer/watermark to a value greater than
 		hwfifo_watermak_min but not equal to any of the values in this
 		list, the driver will chose an appropriate value for the
@@ -1564,6 +1596,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
 KernelVersion:	4.3
@@ -1587,7 +1621,8 @@ KernelVersion:	4.1.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		'1' (enable) or '0' (disable) specifying the enable
-		of heater function. Same reading values apply
+		of heater function. Same reading values apply.
+
 		This ABI is especially applicable for humidity sensors
 		to heatup the device and get rid of any condensation
 		in some humidity environment
@@ -1610,17 +1645,21 @@ Description:
 		Mounting matrix for IIO sensors. This is a rotation matrix which
 		informs userspace about sensor chip's placement relative to the
 		main hardware it is mounted on.
+
 		Main hardware placement is defined according to the local
 		reference frame related to the physical quantity the sensor
 		measures.
+
 		Given that the rotation matrix is defined in a board specific
 		way (platform data and / or device-tree), the main hardware
 		reference frame definition is left to the implementor's choice
 		(see below for a magnetometer example).
+
 		Applications should apply this rotation matrix to samples so
 		that when main hardware reference frame is aligned onto local
 		reference frame, then sensor chip reference frame is also
 		perfectly aligned with it.
+
 		Matrix is a 3x3 unitary matrix and typically looks like
 		[0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix
 		[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware
@@ -1629,8 +1668,10 @@ Description:
 		For example, a mounting matrix for a magnetometer sensor informs
 		userspace about sensor chip's ORIENTATION relative to the main
 		hardware.
+
 		More specifically, main hardware orientation is defined with
 		respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where :
+
 		* Y is in the ground plane and positive towards magnetic North ;
 		* X is in the ground plane, perpendicular to the North axis and
 		  positive towards the East ;
@@ -1639,13 +1680,16 @@ Description:
 		An implementor might consider that for a hand-held device, a
 		'natural' orientation would be 'front facing camera at the top'.
 		The main hardware reference frame could then be described as :
+
 		* Y is in the plane of the screen and is positive towards the
 		  top of the screen ;
 		* X is in the plane of the screen, perpendicular to Y axis, and
 		  positive towards the right hand side of the screen ;
 		* Z is perpendicular to the screen plane and positive out of the
 		  screen.
+
 		Another example for a quadrotor UAV might be :
+
 		* Y is in the plane of the propellers and positive towards the
 		  front-view camera;
 		* X is in the plane of the propellers, perpendicular to Y axis,
@@ -1687,6 +1731,7 @@ Description:
 		This interface is deprecated; please use the Counter subsystem.
 
 		A list of possible counting directions which are:
+
 		- "up"	: counter device is increasing.
 		- "down": counter device is decreasing.
 
@@ -1740,3 +1785,20 @@ KernelVersion:	5.5
 Contact:	linux-iio@vger.kernel.org
 Description:
 		One of the following thermocouple types: B, E, J, K, N, R, S, T.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibambient
+KernelVersion:	5.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Calibrated ambient temperature for object temperature
+		calculation in milli degrees Celsius.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
+KernelVersion:	5.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Unscaled light intensity according to CIE 1931/DIN 5033 color space.
+		Units after application of scale are nano nanowatts per square meter.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
new file mode 100644
index 000000000000..47e34f865ca1
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
@@ -0,0 +1,7 @@
+What:		/sys/bus/iio/devices/triggerX/name = "adxl372-devX-peak"
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The adxl372 accelerometer kernel module provides an additional trigger,
+		which sets the device in a mode in which it will record only the peak acceleration
+		sensed over the set period of time in the events sysfs.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
index 2071f9bcfaa5..1c2a07f7a75e 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
@@ -5,7 +5,8 @@ Contact:	Peter Rosin <peda@axentia.se>
 Description:
 		The DAC is used to find the peak level of an alternating
 		voltage input signal by a binary search using the output
-		of a comparator wired to an interrupt pin. Like so:
+		of a comparator wired to an interrupt pin. Like so::
+
 		                           _
 		                          | \
 		     input +------>-------|+ \
@@ -19,10 +20,12 @@ Description:
 		            |    irq|------<-------'
 		            |       |
 		            '-------'
+
 		The boolean invert attribute (0/1) should be set when the
 		input signal is centered around the maximum value of the
 		dac instead of zero. The envelope detector will search
 		from below in this case and will also invert the result.
+
 		The edge/level of the interrupt is also switched to its
 		opposite value.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
index f30b4c424fb6..4b01150af397 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
@@ -19,9 +19,11 @@ Description:
 		is separately set for "GND-Open" and "Supply-Open" modes.
 		Channels 0..31 have common low threshold values, but could have different
 		sensing_modes.
+
 		The low voltage threshold range is between 2..21V.
 		Hysteresis between low and high thresholds can not be lower then 2 and
 		can not be odd.
+
 		If falling threshold results hysteresis to odd value then rising
 		threshold is automatically subtracted by one.
 
@@ -34,10 +36,13 @@ Description:
 		this value then the threshold rising event is pushed.
 		Depending on in_voltageY_sensing_mode the high voltage threshold
 		is separately set for "GND-Open" and "Supply-Open" modes.
+
 		Channels 0..31 have common high threshold values, but could have different
 		sensing_modes.
+
 		The high voltage threshold range is between 3..22V.
 		Hysteresis between low and high thresholds can not be lower then 2 and
 		can not be odd.
+
 		If rising threshold results hysteresis to odd value then falling
 		threshold is automatically appended by one.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
index efe4c85e3c8b..1975c7a1af34 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
@@ -5,10 +5,13 @@ Description:
 		The STM32 ADC can be configured to use external trigger sources
 		(e.g. timers, pwm or exti gpio). Then, it can be tuned to start
 		conversions on external trigger by either:
+
 		- "rising-edge"
 		- "falling-edge"
 		- "both-edges".
+
 		Reading returns current trigger polarity.
+
 		Writing value before enabling conversions sets trigger polarity.
 
 What:		/sys/bus/iio/devices/triggerX/trigger_polarity_available
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-cros-ec linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
index 6158f831c761..adf24c40126f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
@@ -4,7 +4,7 @@ KernelVersion:	4.7
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Writing '1' will perform a FOC (Fast Online Calibration). The
-                corresponding calibration offsets can be read from *_calibbias
+                corresponding calibration offsets can be read from `*_calibbias`
                 entries.
 
 What:		/sys/bus/iio/devices/iio:deviceX/location
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
index 0e66ae9b0071..91439d6d60b5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
@@ -3,14 +3,20 @@ KernelVersion:	4.14
 Contact:	arnaud.pouliquen@st.com
 Description:
 		For audio purpose only.
+
 		Used by audio driver to set/get the spi input frequency.
+
 		This is mandatory if DFSDM is slave on SPI bus, to
 		provide information on the SPI clock frequency during runtime
 		Notice that the SPI frequency should be a multiple of sample
 		frequency to ensure the precision.
-		if DFSDM input is SPI master
+
+		if DFSDM input is SPI master:
+
 			Reading  SPI clkout frequency,
 			error on writing
+
 		If DFSDM input is SPI Slave:
+
 			Reading returns value previously set.
 			Writing value before starting conversions.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
index a133fd8d081a..40df5c9fef99 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
@@ -15,8 +15,11 @@ Description:
 		first object echoed in meters. Default value is 6.020.
 		This setting limits the time the driver is waiting for a
 		echo.
+
 		Showing the range of available values is represented as the
 		minimum value, the step and the maximum value, all enclosed
 		in square brackets.
-		Example:
-		[0.043 0.043 11.008]
+
+		Example::
+
+			[0.043 0.043 11.008]
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
index a91aeabe7b24..d065cda7dd96 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
@@ -8,7 +8,9 @@ KernelVersion:	3.4.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading returns either '1' or '0'.
+
 		'1' means that the clock in question is present.
+
 		'0' means that the clock is missing.
 
 What:		/sys/bus/iio/devices/iio:deviceX/pllY_locked
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
index 302de64cb424..544548ee794c 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
@@ -27,12 +27,12 @@ What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Reading returns the datasheet name for channel Y:
+		Reading returns the datasheet name for channel Y::
 
-		out_altvoltage0_name: RF8x
-		out_altvoltage1_name: RFAUX8x
-		out_altvoltage2_name: RF16x
-		out_altvoltage3_name: RF32x
+		  out_altvoltage0_name: RF8x
+		  out_altvoltage1_name: RFAUX8x
+		  out_altvoltage2_name: RF16x
+		  out_altvoltage3_name: RF32x
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
 KernelVersion:
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
index 6adba9058b22..66b621f10223 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
@@ -6,10 +6,14 @@ Description:
 		Get measured values from the ADC for these stages. Y is the
 		specific stage number corresponding to datasheet stage names
 		as follows:
-		1 -> LED2
-		2 -> ALED2/LED3
-		3 -> LED1
-		4 -> ALED1/LED4
+
+		== ==========
+		1  LED2
+		2  ALED2/LED3
+		3  LED1
+		4  ALED1/LED4
+		== ==========
+
 		Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
 		respectively which simply helper channels containing the
 		calculated difference in the value of stage 1 - 2 and 3 - 4.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
new file mode 100644
index 000000000000..5b78af5f341d
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
@@ -0,0 +1,9 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
+KernelVersion:	5.3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Controls the heater device within the humidity sensor to get
+		rid of excess condensation.
+
+		Valid control values are 0 = OFF, and 1 = ON.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
index f0ce0a0476ea..220206a20d98 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
@@ -15,5 +15,7 @@ Description:
 		Scheme 0 has wider dynamic range, Scheme 1 proximity detection
 		is less affected by the ambient IR noise variation.
 
-		0 Sensing IR from LED and ambient
-		1 Sensing IR from LED with ambient IR rejection
+		== =============================================
+		0  Sensing IR from LED and ambient
+		1  Sensing IR from LED with ambient IR rejection
+		== =============================================
diff --git linux-libre-5.9-gnu/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772
similarity index 100%
rename from drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
rename to Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
index ad2cc63e4bf8..73498ff666bd 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
@@ -17,9 +17,11 @@ KernelVersion:	4.13
 Contact:	fabrice.gasnier@st.com
 Description:
 		Configure the device counter quadrature modes:
+
 		- non-quadrature:
 			Encoder IN1 input servers as the count input (up
 			direction).
+
 		- quadrature:
 			Encoder IN1 and IN2 inputs are mixed to get direction
 			and count.
@@ -35,23 +37,26 @@ KernelVersion:	4.13
 Contact:	fabrice.gasnier@st.com
 Description:
 		Configure the device encoder/counter active edge:
+
 		- rising-edge
 		- falling-edge
 		- both-edges
 
 		In non-quadrature mode, device counts up on active edge.
+
 		In quadrature mode, encoder counting scenarios are as follows:
-		----------------------------------------------------------------
+
+		+---------+----------+--------------------+--------------------+
 		| Active  | Level on |      IN1 signal    |     IN2 signal     |
-		| edge    | opposite |------------------------------------------
+		| edge    | opposite +----------+---------+----------+---------+
 		|         | signal   |  Rising  | Falling |  Rising  | Falling |
-		----------------------------------------------------------------
-		| Rising  | High ->  |   Down   |    -    |    Up    |    -    |
-		| edge    | Low  ->  |    Up    |    -    |   Down   |    -    |
-		----------------------------------------------------------------
-		| Falling | High ->  |    -     |    Up   |    -     |   Down  |
-		| edge    | Low  ->  |    -     |   Down  |    -     |    Up   |
-		----------------------------------------------------------------
-		| Both    | High ->  |   Down   |    Up   |    Up    |   Down  |
-		| edges   | Low  ->  |    Up    |   Down  |   Down   |    Up   |
-		----------------------------------------------------------------
+		+---------+----------+----------+---------+----------+---------+
+		| Rising  | High ->  |   Down   |    -    |   Up     |    -    |
+		| edge    | Low  ->  |   Up     |    -    |   Down   |    -    |
+		+---------+----------+----------+---------+----------+---------+
+		| Falling | High ->  |    -     |   Up    |    -     |   Down  |
+		| edge    | Low  ->  |    -     |   Down  |    -     |   Up    |
+		+---------+----------+----------+---------+----------+---------+
+		| Both    | High ->  |   Down   |   Up    |   Up     |   Down  |
+		| edges   | Low  ->  |   Up     |   Down  |   Down   |   Up    |
+		+---------+----------+----------+---------+----------+---------+
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
index 6275e9f56e6c..13f099ef6a95 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
@@ -5,11 +5,16 @@ Contact:        linux-iio@vger.kernel.org
 Description:
                 Current configuration and available configurations
 		for the bias current.
-		normal		- Normal measurement configurations (default)
-		positivebias	- Positive bias configuration
-		negativebias	- Negative bias configuration
-		disabled	- Only available on HMC5983. Disables magnetic
+
+		============	  ============================================
+		normal		  Normal measurement configurations (default)
+		positivebias	  Positive bias configuration
+		negativebias	  Negative bias configuration
+		disabled	  Only available on HMC5983. Disables magnetic
 				  sensor and enables temperature sensor.
-		Note: The effect of this configuration may vary
-		according to the device. For exact documentation
-		check the device's datasheet.
+		============	  ============================================
+
+		Note:
+		  The effect of this configuration may vary
+		  according to the device. For exact documentation
+		  check the device's datasheet.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
index 3b3509a3ef2f..e5ef6d8e5da1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
@@ -5,9 +5,12 @@ Description:
 		Open-circuit fault. The detection of open-circuit faults,
 		such as those caused by broken thermocouple wires.
 		Reading returns either '1' or '0'.
-		'1' = An open circuit such as broken thermocouple wires
-		      has been detected.
-		'0' = No open circuit or broken thermocouple wires are detected
+
+		===  =======================================================
+		'1'  An open circuit such as broken thermocouple wires
+		     has been detected.
+		'0'  No open circuit or broken thermocouple wires are detected
+		===  =======================================================
 
 What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
 KernelVersion:	5.1
@@ -18,7 +21,11 @@ Description:
 		cables by integrated MOSFETs at the T+ and T- inputs, and the
 		BIAS output. These MOSFETs turn off when the input voltage is
 		negative or greater than VDD.
+
 		Reading returns either '1' or '0'.
-		'1' = The input voltage is negative or greater than VDD.
-		'0' = The input voltage is positive and less than VDD (normal
-		state).
+
+		===  =======================================================
+		'1'  The input voltage is negative or greater than VDD.
+		'0'  The input voltage is positive and less than VDD (normal
+		     state).
+		===  =======================================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
index b7259234ad70..c4a4497c249a 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -3,67 +3,85 @@ KernelVersion:	4.11
 Contact:	benjamin.gaignard@st.com
 Description:
 		Reading returns the list possible master modes which are:
-		- "reset"     :	The UG bit from the TIMx_EGR register is
+
+
+		- "reset"
+				The UG bit from the TIMx_EGR register is
 				used as trigger output (TRGO).
-		- "enable"    : The Counter Enable signal CNT_EN is used
+		- "enable"
+				The Counter Enable signal CNT_EN is used
 				as trigger output.
-		- "update"    : The update event is selected as trigger output.
+		- "update"
+				The update event is selected as trigger output.
 				For instance a master timer can then be used
 				as a prescaler for a slave timer.
-		- "compare_pulse" : The trigger output send a positive pulse
-				    when the CC1IF flag is to be set.
-		- "OC1REF"    : OC1REF signal is used as trigger output.
-		- "OC2REF"    : OC2REF signal is used as trigger output.
-		- "OC3REF"    : OC3REF signal is used as trigger output.
-		- "OC4REF"    : OC4REF signal is used as trigger output.
+		- "compare_pulse"
+				The trigger output send a positive pulse
+				when the CC1IF flag is to be set.
+		- "OC1REF"
+				OC1REF signal is used as trigger output.
+		- "OC2REF"
+				OC2REF signal is used as trigger output.
+		- "OC3REF"
+				OC3REF signal is used as trigger output.
+		- "OC4REF"
+				OC4REF signal is used as trigger output.
+
 		Additional modes (on TRGO2 only):
-		- "OC5REF"    : OC5REF signal is used as trigger output.
-		- "OC6REF"    : OC6REF signal is used as trigger output.
+
+		- "OC5REF"
+				OC5REF signal is used as trigger output.
+		- "OC6REF"
+				OC6REF signal is used as trigger output.
 		- "compare_pulse_OC4REF":
-		  OC4REF rising or falling edges generate pulses.
+				OC4REF rising or falling edges generate pulses.
 		- "compare_pulse_OC6REF":
-		  OC6REF rising or falling edges generate pulses.
+				OC6REF rising or falling edges generate pulses.
 		- "compare_pulse_OC4REF_r_or_OC6REF_r":
-		  OC4REF or OC6REF rising edges generate pulses.
+				OC4REF or OC6REF rising edges generate pulses.
 		- "compare_pulse_OC4REF_r_or_OC6REF_f":
-		  OC4REF rising or OC6REF falling edges generate pulses.
+				OC4REF rising or OC6REF falling edges generate
+				pulses.
 		- "compare_pulse_OC5REF_r_or_OC6REF_r":
-		  OC5REF or OC6REF rising edges generate pulses.
+				OC5REF or OC6REF rising edges generate pulses.
 		- "compare_pulse_OC5REF_r_or_OC6REF_f":
-		  OC5REF rising or OC6REF falling edges generate pulses.
-
-		+-----------+   +-------------+            +---------+
-		| Prescaler +-> | Counter     |        +-> | Master  | TRGO(2)
-		+-----------+   +--+--------+-+        |-> | Control +-->
-		                   |        |          ||  +---------+
-		                +--v--------+-+ OCxREF ||  +---------+
-		                | Chx compare +----------> | Output  | ChX
-		                +-----------+-+         |  | Control +-->
-		                      .     |           |  +---------+
-		                      .     |           |    .
-		                +-----------v-+ OC6REF  |    .
-		                | Ch6 compare +---------+>
-		                +-------------+
-
-		Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":
-
-		                X
-		              X   X
-		            X .   . X
-		          X   .   .   X
-		        X     .   .     X
-		count X .     .   .     . X
-		        .     .   .     .
-		        .     .   .     .
-		        +---------------+
-		OC4REF  |     .   .     |
-		      +-+     .   .     +-+
-		        .     +---+     .
-		OC6REF  .     |   |     .
-		      +-------+   +-------+
-		        +-+   +-+
-		TRGO2   | |   | |
-		      +-+ +---+ +---------+
+				OC5REF rising or OC6REF falling edges generate
+				pulses.
+
+		::
+
+		  +-----------+   +-------------+            +---------+
+		  | Prescaler +-> | Counter     |        +-> | Master  | TRGO(2)
+		  +-----------+   +--+--------+-+        |-> | Control +-->
+		                     |        |          ||  +---------+
+		                  +--v--------+-+ OCxREF ||  +---------+
+		                  | Chx compare +----------> | Output  | ChX
+		                  +-----------+-+         |  | Control +-->
+		                        .     |           |  +---------+
+		                        .     |           |    .
+		                  +-----------v-+ OC6REF  |    .
+		                  | Ch6 compare +---------+>
+		                  +-------------+
+
+		Example with: "compare_pulse_OC4REF_r_or_OC6REF_r"::
+
+		                  X
+		                X   X
+		              X .   . X
+		            X   .   .   X
+		          X     .   .     X
+		  count X .     .   .     . X
+		          .     .   .     .
+		          .     .   .     .
+		          +---------------+
+		  OC4REF  |     .   .     |
+		        +-+     .   .     +-+
+		          .     +---+     .
+		  OC6REF  .     |   |     .
+		        +-------+   +-------+
+		          +-+   +-+
+		  TRGO2   | |   | |
+		        +-+ +---+ +---------+
 
 What:		/sys/bus/iio/devices/triggerX/master_mode
 KernelVersion:	4.11
@@ -104,6 +122,7 @@ Description:
 		Configure the device counter enable modes, in all case
 		counting direction is set by in_count0_count_direction
 		attribute and the counter is clocked by the internal clock.
+
 		always:
 			Counter is always ON.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
index 22d0843849a8..b7b2278fe042 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
@@ -10,10 +10,13 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RO) Output port type:
-		  0: not present,
-		  1: MSU (Memory Storage Unit)
-		  2: CTP (Common Trace Port)
-		  4: PTI (MIPI PTI).
+
+		 ==  =========================
+		  0  not present,
+		  1  MSU (Memory Storage Unit)
+		  2  CTP (Common Trace Port)
+		  4  PTI (MIPI PTI).
+		 ==  =========================
 
 What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop
 Date:		June 2015
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
index 7fd2601c2831..a74252e580a5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
@@ -9,11 +9,13 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RW) Configure MSC operating mode:
+
 		  - "single", for contiguous buffer mode (high-order alloc);
 		  - "multi", for multiblock mode;
 		  - "ExI", for DCI handler mode;
 		  - "debug", for debug mode;
 		  - any of the currently loaded buffer sinks.
+
 		If operating mode changes, existing buffer is deallocated,
 		provided there are no active users and tracing is not enabled,
 		otherwise the write will fail.
@@ -23,10 +25,12 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RW) Configure MSC buffer size for "single" or "multi" modes.
+
 		In single mode, this is a single number of pages, has to be
 		power of 2. In multiblock mode, this is a comma-separated list
 		of numbers of pages for each window to be allocated. Number of
 		windows is not limited.
+
 		Writing to this file deallocates existing buffer (provided
 		there are no active users and tracing is not enabled) and then
 		allocates a new one.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-mei linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-mei
index 3d37e2796d5a..6e9a105fe5cb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-mei
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-mei
@@ -41,6 +41,13 @@ Contact:	Tomas Winkler <tomas.winkler@intel.com>
 Description:	Stores mei client fixed address, if any
 		Format: %d
 
+What:		/sys/bus/mei/devices/.../vtag
+Date:		Nov 2020
+KernelVersion:	5.9
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Stores mei client vtag support status
+		Format: %d
+
 What:		/sys/bus/mei/devices/.../max_len
 Date:		Nov 2019
 KernelVersion:	5.5
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-most linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-most
index ec0a603d804b..38cc03e408e7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-most
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-most
@@ -235,7 +235,8 @@ KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
 		This is to read back the configured direction of the channel.
-		The following strings will be accepted:
+		The following strings will be accepted::
+
 			'tx',
 			'rx'
 Users:
@@ -246,7 +247,8 @@ KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
 		This is to read back the configured data type of the channel.
-		The following strings will be accepted:
+		The following strings will be accepted::
+
 			'control',
 			'async',
 			'sync',
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-moxtet-devices linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-moxtet-devices
index 355958527fa3..4a6d61b44f3f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-moxtet-devices
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-moxtet-devices
@@ -2,16 +2,16 @@ What:		/sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description
 Date:		March 2019
 KernelVersion:	5.3
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) Moxtet module description. Format: string
+Description:	(Read) Moxtet module description. Format: string
 
 What:		/sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id
 Date:		March 2019
 KernelVersion:	5.3
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) Moxtet module ID. Format: %x
+Description:	(Read) Moxtet module ID. Format: %x
 
 What:		/sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name
 Date:		March 2019
 KernelVersion:	5.3
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) Moxtet module name. Format: string
+Description:	(Read) Moxtet module name. Format: string
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-nfit linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-nfit
index e4f76e7eab93..63ef0b9ecce7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-nfit
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-nfit
@@ -1,4 +1,4 @@
-For all of the nmem device attributes under nfit/*, see the 'NVDIMM Firmware
+For all of the nmem device attributes under ``nfit/*``, see the 'NVDIMM Firmware
 Interface Table (NFIT)' section in the ACPI specification
 (http://www.uefi.org/specifications) for more details.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-nvdimm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-nvdimm
index d64380262be8..bff84a16812a 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-nvdimm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-nvdimm
@@ -1,2 +1,8 @@
+What:          nvdimm
+Date:          July 2020
+KernelVersion: 5.8
+Contact:       Dan Williams <dan.j.williams@intel.com>
+Description:
+
 The libnvdimm sub-system implements a common sysfs interface for
 platform nvdimm resources. See Documentation/driver-api/nvdimm/.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-papr-pmem linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-papr-pmem
index c1a67275c43f..8316c33862a0 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-papr-pmem
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -11,19 +11,26 @@ Description:
 		at 'Documentation/powerpc/papr_hcalls.rst' . Below are
 		the flags reported in this sysfs file:
 
-		* "not_armed"	: Indicates that NVDIMM contents will not
+		* "not_armed"
+				  Indicates that NVDIMM contents will not
 				  survive a power cycle.
-		* "flush_fail"	: Indicates that NVDIMM contents
+		* "flush_fail"
+				  Indicates that NVDIMM contents
 				  couldn't be flushed during last
 				  shut-down event.
-		* "restore_fail": Indicates that NVDIMM contents
+		* "restore_fail"
+				  Indicates that NVDIMM contents
 				  couldn't be restored during NVDIMM
 				  initialization.
-		* "encrypted"	: NVDIMM contents are encrypted.
-		* "smart_notify": There is health event for the NVDIMM.
-		* "scrubbed"	: Indicating that contents of the
+		* "encrypted"
+				  NVDIMM contents are encrypted.
+		* "smart_notify"
+				  There is health event for the NVDIMM.
+		* "scrubbed"
+				  Indicating that contents of the
 				  NVDIMM have been scrubbed.
-		* "locked"	: Indicating that NVDIMM contents cant
+		* "locked"
+				  Indicating that NVDIMM contents cant
 				  be modified until next power cycle.
 
 What:		/sys/bus/nd/devices/nmemX/papr/perf_stats
@@ -51,4 +58,4 @@ Description:
 		* "MedWDur " : Media Write Duration
 		* "CchRHCnt" : Cache Read Hit Count
 		* "CchWHCnt" : Cache Write Hit Count
-		* "FastWCnt" : Fast Write Count
\ No newline at end of file
+		* "FastWCnt" : Fast Write Count
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci
index 450296cc7948..77ad9ec3c801 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -7,8 +7,10 @@ Description:
 		this location.	This is useful for overriding default
 		bindings.  The format for the location is: DDDD:BB:DD.F.
 		That is Domain:Bus:Device.Function and is the same as
-		found in /sys/bus/pci/devices/.  For example:
-		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+		found in /sys/bus/pci/devices/.  For example::
+
+		  # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+
 		(Note: kernels before 2.6.28 may require echo -n).
 
 What:		/sys/bus/pci/drivers/.../unbind
@@ -20,8 +22,10 @@ Description:
 		this location.	This may be useful when overriding default
 		bindings.  The format for the location is: DDDD:BB:DD.F.
 		That is Domain:Bus:Device.Function and is the same as
-		found in /sys/bus/pci/devices/. For example:
-		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+		found in /sys/bus/pci/devices/. For example::
+
+		  # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+
 		(Note: kernels before 2.6.28 may require echo -n).
 
 What:		/sys/bus/pci/drivers/.../new_id
@@ -38,8 +42,9 @@ Description:
 		Class, Class Mask, and Private Driver Data.  The Vendor ID
 		and Device ID fields are required, the rest are optional.
 		Upon successfully adding an ID, the driver will probe
-		for the device and attempt to bind to it.  For example:
-		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+		for the device and attempt to bind to it.  For example::
+
+		  # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
 
 What:		/sys/bus/pci/drivers/.../remove_id
 Date:		February 2009
@@ -54,8 +59,9 @@ Description:
 		required, the rest are optional.  After successfully
 		removing an ID, the driver will no longer support the
 		device.  This is useful to ensure auto probing won't
-		match the driver to the device.  For example:
-		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+		match the driver to the device.  For example::
+
+		  # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
 
 What:		/sys/bus/pci/rescan
 Date:		January 2009
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
index 3c9a8c4a25eb..860db53037a5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -1,6 +1,6 @@
-==========================
 PCIe Device AER statistics
-==========================
+--------------------------
+
 These attributes show up under all the devices that are AER capable. These
 statistical counters indicate the errors "as seen/reported by the device".
 Note that this may mean that if an endpoint is causing problems, the AER
@@ -17,19 +17,18 @@ Description:	List of correctable errors seen and reported by this
 		PCI device using ERR_COR. Note that since multiple errors may
 		be reported using a single ERR_COR message, thus
 		TOTAL_ERR_COR at the end of the file may not match the actual
-		total of all the errors in the file. Sample output:
--------------------------------------------------------------------------
-localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable
-Receiver Error 2
-Bad TLP 0
-Bad DLLP 0
-RELAY_NUM Rollover 0
-Replay Timer Timeout 0
-Advisory Non-Fatal 0
-Corrected Internal Error 0
-Header Log Overflow 0
-TOTAL_ERR_COR 2
--------------------------------------------------------------------------
+		total of all the errors in the file. Sample output::
+
+		    localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable
+		    Receiver Error 2
+		    Bad TLP 0
+		    Bad DLLP 0
+		    RELAY_NUM Rollover 0
+		    Replay Timer Timeout 0
+		    Advisory Non-Fatal 0
+		    Corrected Internal Error 0
+		    Header Log Overflow 0
+		    TOTAL_ERR_COR 2
 
 What:		/sys/bus/pci/devices/<dev>/aer_dev_fatal
 Date:		July 2018
@@ -39,28 +38,27 @@ Description:	List of uncorrectable fatal errors seen and reported by this
 		PCI device using ERR_FATAL. Note that since multiple errors may
 		be reported using a single ERR_FATAL message, thus
 		TOTAL_ERR_FATAL at the end of the file may not match the actual
-		total of all the errors in the file. Sample output:
--------------------------------------------------------------------------
-localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal
-Undefined 0
-Data Link Protocol 0
-Surprise Down Error 0
-Poisoned TLP 0
-Flow Control Protocol 0
-Completion Timeout 0
-Completer Abort 0
-Unexpected Completion 0
-Receiver Overflow 0
-Malformed TLP 0
-ECRC 0
-Unsupported Request 0
-ACS Violation 0
-Uncorrectable Internal Error 0
-MC Blocked TLP 0
-AtomicOp Egress Blocked 0
-TLP Prefix Blocked Error 0
-TOTAL_ERR_FATAL 0
--------------------------------------------------------------------------
+		total of all the errors in the file. Sample output::
+
+		    localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal
+		    Undefined 0
+		    Data Link Protocol 0
+		    Surprise Down Error 0
+		    Poisoned TLP 0
+		    Flow Control Protocol 0
+		    Completion Timeout 0
+		    Completer Abort 0
+		    Unexpected Completion 0
+		    Receiver Overflow 0
+		    Malformed TLP 0
+		    ECRC 0
+		    Unsupported Request 0
+		    ACS Violation 0
+		    Uncorrectable Internal Error 0
+		    MC Blocked TLP 0
+		    AtomicOp Egress Blocked 0
+		    TLP Prefix Blocked Error 0
+		    TOTAL_ERR_FATAL 0
 
 What:		/sys/bus/pci/devices/<dev>/aer_dev_nonfatal
 Date:		July 2018
@@ -70,32 +68,31 @@ Description:	List of uncorrectable nonfatal errors seen and reported by this
 		PCI device using ERR_NONFATAL. Note that since multiple errors
 		may be reported using a single ERR_FATAL message, thus
 		TOTAL_ERR_NONFATAL at the end of the file may not match the
-		actual total of all the errors in the file. Sample output:
--------------------------------------------------------------------------
-localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal
-Undefined 0
-Data Link Protocol 0
-Surprise Down Error 0
-Poisoned TLP 0
-Flow Control Protocol 0
-Completion Timeout 0
-Completer Abort 0
-Unexpected Completion 0
-Receiver Overflow 0
-Malformed TLP 0
-ECRC 0
-Unsupported Request 0
-ACS Violation 0
-Uncorrectable Internal Error 0
-MC Blocked TLP 0
-AtomicOp Egress Blocked 0
-TLP Prefix Blocked Error 0
-TOTAL_ERR_NONFATAL 0
--------------------------------------------------------------------------
+		actual total of all the errors in the file. Sample output::
+
+		    localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal
+		    Undefined 0
+		    Data Link Protocol 0
+		    Surprise Down Error 0
+		    Poisoned TLP 0
+		    Flow Control Protocol 0
+		    Completion Timeout 0
+		    Completer Abort 0
+		    Unexpected Completion 0
+		    Receiver Overflow 0
+		    Malformed TLP 0
+		    ECRC 0
+		    Unsupported Request 0
+		    ACS Violation 0
+		    Uncorrectable Internal Error 0
+		    MC Blocked TLP 0
+		    AtomicOp Egress Blocked 0
+		    TLP Prefix Blocked Error 0
+		    TOTAL_ERR_NONFATAL 0
 
-============================
 PCIe Rootport AER statistics
-============================
+----------------------------
+
 These attributes show up under only the rootports (or root complex event
 collectors) that are AER capable. These indicate the number of error messages as
 "reported to" the rootport. Please note that the rootports also transmit
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
new file mode 100644
index 000000000000..f85db86d63e8
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
@@ -0,0 +1,17 @@
+What:		/sys/devices/pci0000:00/<dev>/fw_version
+Date:		September 2020
+Contact:	Cezary Rojewski <cezary.rojewski@intel.com>
+Description:
+		Version of AudioDSP firmware ASoC catpt driver is
+		communicating with.
+
+		Format: %d.%d.%d.%d, type:major:minor:build.
+
+What:		/sys/devices/pci0000:00/<dev>/fw_info
+Date:		September 2020
+Contact:	Cezary Rojewski <cezary.rojewski@intel.com>
+Description:
+		Detailed AudioDSP firmware build information including
+		build hash and log-providers hash. This information is
+		obtained during initial handshake with firmware.
+		Format: %s.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
index 60c60fa624b2..c90d97a80855 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
@@ -21,11 +21,11 @@ Description:
 		number returns the port to normal operation.
 
 		For example: To force the high-speed device attached to
-		port 4 on bus 2 to run at full speed:
+		port 4 on bus 2 to run at full speed::
 
 			echo 4 >/sys/bus/usb/devices/usb2/../companion
 
-		To return the port to high-speed operation:
+		To return the port to high-speed operation::
 
 			echo -4 >/sys/bus/usb/devices/usb2/../companion
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-rapidio linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-rapidio
index 13208b27dd87..634ea207a50a 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-rapidio
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-rapidio
@@ -4,24 +4,27 @@ Description:
 		an individual subdirectory with the following name format of
 		device_name "nn:d:iiii", where:
 
-		nn   - two-digit hexadecimal ID of RapidIO network where the
+		====   ========================================================
+		nn     two-digit hexadecimal ID of RapidIO network where the
 		       device resides
-		d    - device type: 'e' - for endpoint or 's' - for switch
-		iiii - four-digit device destID for endpoints, or switchID for
+		d      device type: 'e' - for endpoint or 's' - for switch
+		iiii   four-digit device destID for endpoints, or switchID for
 		       switches
+		====   ========================================================
 
 		For example, below is a list of device directories that
 		represents a typical RapidIO network with one switch, one host,
 		and two agent endpoints, as it is seen by the enumerating host
-		(with destID = 1):
+		(with destID = 1)::
 
-		/sys/bus/rapidio/devices/00:e:0000
-		/sys/bus/rapidio/devices/00:e:0002
-		/sys/bus/rapidio/devices/00:s:0001
+		  /sys/bus/rapidio/devices/00:e:0000
+		  /sys/bus/rapidio/devices/00:e:0002
+		  /sys/bus/rapidio/devices/00:s:0001
 
-		NOTE: An enumerating or discovering endpoint does not create a
-		sysfs entry for itself, this is why an endpoint with destID=1 is
-		not shown in the list.
+		NOTE:
+		  An enumerating or discovering endpoint does not create a
+		  sysfs entry for itself, this is why an endpoint with destID=1
+		  is not shown in the list.
 
 Attributes Common for All RapidIO Devices
 -----------------------------------------
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-rbd linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-rbd
index cc30bee8b5f4..417a2fe21be1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-rbd
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-rbd
@@ -7,6 +7,8 @@ Description:
 
 		Usage: <mon ip addr> <options> <pool name> <rbd image name> [<snap name>]
 
+		Example::
+
 		 $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
 
 		The snapshot name can be "-" or omitted to map the image
@@ -23,6 +25,8 @@ Description:
 
 		Usage: <dev-id> [force]
 
+		Example::
+
 		 $ echo 2 > /sys/bus/rbd/remove
 
 		Optional "force" argument which when passed will wait for
@@ -80,26 +84,29 @@ Date:		Oct, 2010
 KernelVersion:	v2.6.37
 Contact:	Sage Weil <sage@newdream.net>
 Description:
-		size:		(RO) The size (in bytes) of the mapped block
+
+		==============	================================================
+		size		(RO) The size (in bytes) of the mapped block
 				device.
 
-		major:		(RO) The block device major number.
+		major		(RO) The block device major number.
 
-		client_id:	(RO) The ceph unique client id that was assigned
+		client_id	(RO) The ceph unique client id that was assigned
 				for this specific session.
 
-		pool:		(RO) The name of the storage pool where this rbd
+		pool		(RO) The name of the storage pool where this rbd
 				image resides. An rbd image name is unique
 				within its pool.
 
-		name:		(RO) The name of the rbd image.
+		name		(RO) The name of the rbd image.
 
-		refresh:	(WO) Writing to this file will reread the image
+		refresh		(WO) Writing to this file will reread the image
 				header data and set all relevant data structures
 				accordingly.
 
-		current_snap:	(RO) The current snapshot for which the device
+		current_snap	(RO) The current snapshot for which the device
 				is mapped.
+		==============	================================================
 
 
 What:		/sys/bus/rbd/devices/<dev-id>/pool_id
@@ -117,11 +124,13 @@ Date:		Oct, 2012
 KernelVersion:	v3.7
 Contact:	Sage Weil <sage@newdream.net>
 Description:
-		image_id:	(RO) The unique id for the rbd image. (For rbd
+		=========	===============================================
+		image_id	(RO) The unique id for the rbd image. (For rbd
 				image format 1 this is empty.)
 
-		features:	(RO) A hexadecimal encoding of the feature bits
+		features	(RO) A hexadecimal encoding of the feature bits
 				for this image.
+		=========	===============================================
 
 
 What:		/sys/bus/rbd/devices/<dev-id>/parent
@@ -149,14 +158,16 @@ Date:		Aug, 2016
 KernelVersion:	v4.9
 Contact:	Sage Weil <sage@newdream.net>
 Description:
-		snap_id:	(RO) The current snapshot's id.
+		============	================================================
+		snap_id		(RO) The current snapshot's id.
 
-		config_info:	(RO) The string written into
+		config_info	(RO) The string written into
 				/sys/bus/rbd/add{,_single_major}.
 
-		cluster_fsid:	(RO) The ceph cluster UUID.
+		cluster_fsid	(RO) The ceph cluster UUID.
 
-		client_addr:	(RO) The ceph unique client
+		client_addr	(RO) The ceph unique client
 				entity_addr_t (address + nonce). The format is
 				<address>:<port>/<nonce>: '1.2.3.4:1234/5678' or
 				'[1:2:3:4:5:6:7:8]:1234/5678'.
+		============	================================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-siox linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-siox
index c2a403f20b90..50e80238f30d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-siox
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-siox
@@ -8,6 +8,7 @@ Description:
 		When the file contains a "1" the bus is operated and periodically
 		does a push-pull cycle to write and read data from the
 		connected devices.
+
 		When writing a "0" or "1" the bus moves to the described state.
 
 What:		/sys/bus/siox/devices/siox-X/device_add
@@ -21,8 +22,10 @@ Description:
 		to add a new device dynamically. <type> is the name that is used to match
 		to a driver (similar to the platform bus). <inbytes> and <outbytes> define
 		the length of the input and output shift register in bytes respectively.
+
 		<statustype> defines the 4 bit device type that is check to identify connection
 		problems.
+
 		The new device is added to the end of the existing chain.
 
 What:		/sys/bus/siox/devices/siox-X/device_remove
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-soundwire-slave linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-soundwire-slave
index db4c9511d1aa..d324aa0b678f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-soundwire-slave
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-soundwire-slave
@@ -1,3 +1,21 @@
+What:		/sys/bus/soundwire/devices/sdw:.../status
+		/sys/bus/soundwire/devices/sdw:.../device_number
+
+Date:		September 2020
+
+Contact:	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+		Bard Liao <yung-chuan.liao@linux.intel.com>
+		Vinod Koul <vkoul@kernel.org>
+
+Description:	SoundWire Slave status
+
+		These properties report the Slave status, e.g. if it
+		is UNATTACHED or not, and in the latter case show the
+		device_number. This status information is useful to
+		detect devices exposed by platform firmware but not
+		physically present on the bus, and conversely devices
+		not exposed in platform firmware but enumerated.
+
 What:		/sys/bus/soundwire/devices/sdw:.../dev-properties/mipi_revision
 		/sys/bus/soundwire/devices/sdw:.../dev-properties/wake_capable
 		/sys/bus/soundwire/devices/sdw:.../dev-properties/test_mode_capable
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-thunderbolt linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-thunderbolt
index dd565c378b40..0b4ab9e4b8f4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -37,16 +37,18 @@ Contact:	thunderbolt-software@lists.01.org
 Description:	This attribute holds current Thunderbolt security level
 		set by the system BIOS. Possible values are:
 
-		none: All devices are automatically authorized
-		user: Devices are only authorized based on writing
-		      appropriate value to the authorized attribute
-		secure: Require devices that support secure connect at
-			minimum. User needs to authorize each device.
-		dponly: Automatically tunnel Display port (and USB). No
-			PCIe tunnels are created.
-		usbonly: Automatically tunnel USB controller of the
+		=======  ==================================================
+		none     All devices are automatically authorized
+		user     Devices are only authorized based on writing
+		         appropriate value to the authorized attribute
+		secure   Require devices that support secure connect at
+			 minimum. User needs to authorize each device.
+		dponly   Automatically tunnel Display port (and USB). No
+			 PCIe tunnels are created.
+		usbonly  Automatically tunnel USB controller of the
 			 connected Thunderbolt dock (and Display Port). All
 			 PCIe links downstream of the dock are removed.
+		=======  ==================================================
 
 What: /sys/bus/thunderbolt/devices/.../authorized
 Date:		Sep 2017
@@ -61,17 +63,23 @@ Description:	This attribute is used to authorize Thunderbolt devices
 		yet authorized.
 
 		Possible values are supported:
-		1: The device will be authorized and connected
+
+		==  ===========================================
+		1   The device will be authorized and connected
+		==  ===========================================
 
 		When key attribute contains 32 byte hex string the possible
 		values are:
-		1: The 32 byte hex string is added to the device NVM and
-		   the device is authorized.
-		2: Send a challenge based on the 32 byte hex string. If the
-		   challenge response from device is valid, the device is
-		   authorized. In case of failure errno will be ENOKEY if
-		   the device did not contain a key at all, and
-		   EKEYREJECTED if the challenge response did not match.
+
+		==  ========================================================
+		1   The 32 byte hex string is added to the device NVM and
+		    the device is authorized.
+		2   Send a challenge based on the 32 byte hex string. If the
+		    challenge response from device is valid, the device is
+		    authorized. In case of failure errno will be ENOKEY if
+		    the device did not contain a key at all, and
+		    EKEYREJECTED if the challenge response did not match.
+		==  ========================================================
 
 What: /sys/bus/thunderbolt/devices/.../boot
 Date:		Jun 2018
@@ -185,10 +193,11 @@ Description:	When new NVM image is written to the non-active NVM
 		verification fails an error code is returned instead.
 
 		This file will accept writing values "1" or "2"
+
 		- Writing "1" will flush the image to the storage
-		area and authenticate the image in one action.
+		  area and authenticate the image in one action.
 		- Writing "2" will run some basic validation on the image
-		and flush it to the storage area.
+		  and flush it to the storage area.
 
 		When read holds status of the last authentication
 		operation if an error occurred during the process. This
@@ -205,9 +214,11 @@ Description:	This contains name of the property directory the XDomain
 		question. Following directories are already reserved by
 		the Apple XDomain specification:
 
-		network:  IP/ethernet over Thunderbolt
-		targetdm: Target disk mode protocol over Thunderbolt
-		extdisp:  External display mode protocol over Thunderbolt
+		========  ===============================================
+		network   IP/ethernet over Thunderbolt
+		targetdm  Target disk mode protocol over Thunderbolt
+		extdisp   External display mode protocol over Thunderbolt
+		========  ===============================================
 
 What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias
 Date:		Jan 2018
@@ -285,7 +296,8 @@ Description:	For supported devices, automatically authenticate the new Thunderbo
 		image when the device is disconnected from the host system.
 
 		This file will accept writing values "1" or "2"
+
 		- Writing "1" will flush the image to the storage
-		area and prepare the device for authentication on disconnect.
+		  area and prepare the device for authentication on disconnect.
 		- Writing "2" will run some basic validation on the image
-		and flush it to the storage area.
+		  and flush it to the storage area.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-usb linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-usb
index 614d216dff1d..bf2c1968525f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-usb
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-usb
@@ -9,6 +9,7 @@ Description:
 		by writing INTERFACE to /sys/bus/usb/drivers_probe
 		This allows to avoid side-effects with drivers
 		that need multiple interfaces.
+
 		A deauthorized interface cannot be probed or claimed.
 
 What:		/sys/bus/usb/devices/usbX/interface_authorized_default
@@ -72,24 +73,27 @@ Description:
 		table at compile time. The format for the device ID is:
 		idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct
 		The vendor ID and device ID fields are required, the
-		rest is optional. The Ref* tuple can be used to tell the
+		rest is optional. The `Ref*` tuple can be used to tell the
 		driver to use the same driver_data for the new device as
 		it is used for the reference device.
 		Upon successfully adding an ID, the driver will probe
-		for the device and attempt to bind to it.  For example:
-		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
+		for the device and attempt to bind to it.  For example::
+
+		  # echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
 
 		Here add a new device (0458:7045) using driver_data from
-		an already supported device (0458:704c):
-		# echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
+		an already supported device (0458:704c)::
+
+		  # echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
 
 		Reading from this file will list all dynamically added
 		device IDs in the same format, with one entry per
-		line. For example:
-		# cat /sys/bus/usb/drivers/foo/new_id
-		8086 10f5
-		dead beef 06
-		f00d cafe
+		line. For example::
+
+		  # cat /sys/bus/usb/drivers/foo/new_id
+		  8086 10f5
+		  dead beef 06
+		  f00d cafe
 
 		The list will be truncated at PAGE_SIZE bytes due to
 		sysfs restrictions.
@@ -209,9 +213,11 @@ Description:
 		advance, and behaves well according to the specification.
 		This attribute is a bit-field that controls the behavior of
 		a specific port:
+
 		 - Bit 0 of this field selects the "old" enumeration scheme,
 		   as it is considerably faster (it only causes one USB reset
 		   instead of 2).
+
 		   The old enumeration scheme can also be selected globally
 		   using /sys/module/usbcore/parameters/old_scheme_first, but
 		   it is often not desirable as the new scheme was introduced to
@@ -233,10 +239,10 @@ Description:
 		poll() for monitoring changes to this value in user space.
 
 		Any time this value changes the corresponding hub device will send a
-		udev event with the following attributes:
+		udev event with the following attributes::
 
-		OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
-		OVER_CURRENT_COUNT=[current value of this sysfs attribute]
+		  OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
+		  OVER_CURRENT_COUNT=[current value of this sysfs attribute]
 
 What:		/sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
 Date:		November 2015
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
index 9ade80f81f96..2f86e4223bfc 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
@@ -12,8 +12,11 @@ KernelVersion:	2.6.26
 Contact:	Harrison Metzger <harrisonmetz@gmail.com>
 Description:	Controls the devices display mode.
 		For a 6 character display the values are
+
 			MSB 0x06; LSB 0x3F, and
+
 		for an 8 character display the values are
+
 			MSB 0x08; LSB 0xFF.
 
 What:		/sys/bus/usb/.../textmode
@@ -37,7 +40,7 @@ KernelVersion:	2.6.26
 Contact:	Harrison Metzger <harrisonmetz@gmail.com>
 Description:	Controls the decimal places on the device.
 		To set the nth decimal place, give this field
-		the value of 10 ** n. Assume this field has
+		the value of ``10 ** n``. Assume this field has
 		the value k and has 1 or more decimal places set,
 		to set the mth place (where m is not already set),
-		change this fields value to k + 10 ** m.
+		change this fields value to ``k + 10 ** m``.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-vfio-mdev linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-vfio-mdev
index 452dbe39270e..59fc804265db 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-bus-vfio-mdev
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-bus-vfio-mdev
@@ -28,8 +28,9 @@ Description:
 		Writing UUID to this file will create mediated device of
 		type <type-id> for parent device <device>. This is a
 		write-only file.
-		For example:
-		# echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" >	\
+		For example::
+
+		  # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" >	\
 		       /sys/devices/foo/mdev_supported_types/foo-1/create
 
 What:           /sys/.../mdev_supported_types/<type-id>/devices/
@@ -107,5 +108,6 @@ Description:
 		Writing '1' to this file destroys the mediated device. The
 		vendor driver can fail the remove() callback if that device
 		is active and the vendor driver doesn't support hot unplug.
-		Example:
-		# echo 1 > /sys/bus/mdev/devices/<UUID>/remove
+		Example::
+
+		  # echo 1 > /sys/bus/mdev/devices/<UUID>/remove
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-c2port linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-c2port
index 716cffc457e9..f7b8cf6e4398 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-c2port
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-c2port
@@ -66,13 +66,6 @@ Description:
 		the "erase" command on the on-board flash of the connected
 		micro.
 
-What:		/sys/class/c2port/c2portX/flash_erase
-Date:		October 2008
-Contact:	Rodolfo Giometti <giometti@linux.it>
-Description:
-		The /sys/class/c2port/c2portX/flash_erase file show the
-		on-board flash size of the connected micro.
-
 What:		/sys/class/c2port/c2portX/reset
 Date:		October 2008
 Contact:	Rodolfo Giometti <giometti@linux.it>
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight
index 3ab175a3f5cb..1fc86401bf95 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight
@@ -24,3 +24,63 @@ Description:
 		non-linear
 		  The brightness changes non-linearly with each step. Brightness
 		  controls should use a linear mapping for a linear perception.
+
+What:		/sys/class/backlight/<backlight>/ambient_light_level
+Date:		Apr, 2010
+KernelVersion:	v2.6.35
+Contact:	Michael Hennerich <michael.hennerich@analog.com>
+Description:
+		(RO) Get conversion value of the light sensor.
+
+		The value is automatically updated every 80 ms when the
+		light sensor is enabled.
+
+		The value range is device-driver specific:
+
+		For ADP8870:
+
+		  It returns integer between 0 (dark) and 8000 (max ambient
+		  brightness).
+
+		For ADP8860:
+
+		  It returns a 13-bits integer.
+
+What:		/sys/class/backlight/<backlight>/ambient_light_zone
+Date:		Apr, 2010
+KernelVersion:	v2.6.35
+Contact:	Michael Hennerich <michael.hennerich@analog.com>,
+		device-drivers-devel@blackfin.uclinux.org
+
+Description:
+		(RW) Read or write the specific brightness level at which the
+		backlight operates.
+
+		The value meaning is device-driver specific:
+
+		For ADP8860:
+
+		  ==	==========================
+		   0	Off: Backlight set to 0 mA
+		   1	Level 1: daylight
+		   2	Level 2: bright
+		   3	Level 3: dark
+		  ==	==========================
+
+		For ADP8870:
+
+		  ==	==========================
+		   0	Off: Backlight set to 0 mA
+		   1	Level 1: daylight
+		   2	Level 2: bright
+		   3	Level 3: office
+		   4	Level 4: indoor
+		   5	Level 5: dark
+		  ==	==========================
+
+		Writing 0 returns to normal/automatic ambient light level
+		operation.
+
+		It can be enabled by writing the value stored in
+		/sys/class/backlight/<backlight>/max_brightness to
+		/sys/class/backlight/<backlight>/brightness.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight-adp8860 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight-adp8860
index 54d61c788b1b..6610ac73f9ba 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight-adp8860
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight-adp8860
@@ -6,25 +6,8 @@ adp8860, adp8861 and adp8863 devices: daylight (level 1), office (level 2) and
 dark (level 3). By default the brightness operates at the daylight brightness
 level.
 
-What:		/sys/class/backlight/<backlight>/ambient_light_level
-Date:		Apr, 2010
-KernelVersion:	v2.6.35
-Contact:	Michael Hennerich <michael.hennerich@analog.com>
-Description:
-		(RO) 13-bit conversion value for the first light sensor—high
-		byte (Bit 12 to Bit 8). The value is updated every 80 ms (when
-		the light sensor is enabled).
-
-
-What:		/sys/class/backlight/<backlight>/ambient_light_zone
-Date:		Apr, 2010
-KernelVersion:	v2.6.35
-Contact:	Michael Hennerich <michael.hennerich@analog.com>
-Description:
-		(RW) Read or write the specific level at which the backlight
-		operates. Value "0" enables automatic ambient light sensing, and
-		values "1", "2" or "3" set the control to daylight, office or
-		dark respectively.
+See also /sys/class/backlight/<backlight>/ambient_light_level and
+/sys/class/backlight/<backlight>/ambient_light_zone.
 
 
 What:		/sys/class/backlight/<backlight>/l1_daylight_max
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
index 33e648808117..b08ca912cad4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
@@ -1,3 +1,6 @@
+See also /sys/class/backlight/<backlight>/ambient_light_level and
+/sys/class/backlight/<backlight>/ambient_light_zone.
+
 What:		/sys/class/backlight/<backlight>/<ambient light zone>_max
 What:		/sys/class/backlight/<backlight>/l1_daylight_max
 What:		/sys/class/backlight/<backlight>/l2_bright_max
@@ -27,30 +30,3 @@ Description:
 		set to 0. Full off when the backlight is disabled.
 		This file will also show the dim brightness level stored for
 		this <ambient light zone>.
-
-What:		/sys/class/backlight/<backlight>/ambient_light_level
-Date:		May 2011
-KernelVersion:	3.0
-Contact:	device-drivers-devel@blackfin.uclinux.org
-Description:
-		Get conversion value of the light sensor.
-		This value is updated every 80 ms (when the light sensor
-		is enabled). Returns integer between 0 (dark) and
-		8000 (max ambient brightness)
-
-What:		/sys/class/backlight/<backlight>/ambient_light_zone
-Date:		May 2011
-KernelVersion:	3.0
-Contact:	device-drivers-devel@blackfin.uclinux.org
-Description:
-		Get/Set current ambient light zone. Reading returns
-		integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
-		Writing a value between 1..5 forces the backlight controller
-		to enter the corresponding ambient light zone.
-		Writing 0 returns to normal/automatic ambient light level
-		operation. The ambient light sensing feature on these devices
-		is an extension to the API documented in
-		Documentation/ABI/stable/sysfs-class-backlight.
-		It can be enabled by writing the value stored in
-		/sys/class/backlight/<backlight>/max_brightness to
-		/sys/class/backlight/<backlight>/brightness.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
index c0e0a9ae7b3d..8251e78abc49 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
@@ -6,8 +6,10 @@ Description:
 		Get the ALS output channel used as input in
 		ALS-current-control mode (0, 1), where:
 
-		0 - out_current0 (backlight 0)
-		1 - out_current1 (backlight 1)
+		==  ==========================
+		0   out_current0 (backlight 0)
+		1   out_current1 (backlight 1)
+		==  ==========================
 
 What:		/sys/class/backlight/<backlight>/als_en
 Date:		May 2012
@@ -30,8 +32,10 @@ Contact:	Johan Hovold <jhovold@gmail.com>
 Description:
 		Set the brightness-mapping mode (0, 1), where:
 
-		0 - exponential mode
-		1 - linear mode
+		==  ================
+		0   exponential mode
+		1   linear mode
+		==  ================
 
 What:		/sys/class/backlight/<backlight>/pwm
 Date:		April 2012
@@ -40,9 +44,11 @@ Contact:	Johan Hovold <jhovold@gmail.com>
 Description:
 		Set the PWM-input control mask (5 bits), where:
 
-		bit 5 - PWM-input enabled in Zone 4
-		bit 4 - PWM-input enabled in Zone 3
-		bit 3 - PWM-input enabled in Zone 2
-		bit 2 - PWM-input enabled in Zone 1
-		bit 1 - PWM-input enabled in Zone 0
-		bit 0 - PWM-input enabled
+		=====   ===========================
+		bit 5   PWM-input enabled in Zone 4
+		bit 4   PWM-input enabled in Zone 3
+		bit 3   PWM-input enabled in Zone 2
+		bit 2   PWM-input enabled in Zone 1
+		bit 1   PWM-input enabled in Zone 0
+		bit 0   PWM-input enabled
+		=====   ===========================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-bdi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-bdi
index d773d5697cf5..5402bd74ba43 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-bdi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-bdi
@@ -24,7 +24,6 @@ default
 	filesystems which do not provide their own BDI.
 
 Files under /sys/class/bdi/<bdi>/
----------------------------------
 
 read_ahead_kb (read-write)
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-chromeos linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-chromeos
index 5819699d66ec..74ece942722e 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-chromeos
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-chromeos
@@ -17,13 +17,14 @@ Date:		August 2015
 KernelVersion:	4.2
 Description:
 		Tell the EC to reboot in various ways. Options are:
-		"cancel": Cancel a pending reboot.
-		"ro": Jump to RO without rebooting.
-		"rw": Jump to RW without rebooting.
-		"cold": Cold reboot.
-		"disable-jump": Disable jump until next reboot.
-		"hibernate": Hibernate the EC.
-		"at-shutdown": Reboot after an AP shutdown.
+
+		- "cancel": Cancel a pending reboot.
+		- "ro": Jump to RO without rebooting.
+		- "rw": Jump to RW without rebooting.
+		- "cold": Cold reboot.
+		- "disable-jump": Disable jump until next reboot.
+		- "hibernate": Hibernate the EC.
+		- "at-shutdown": Reboot after an AP shutdown.
 
 What:		/sys/class/chromeos/<ec-device-name>/version
 Date:		August 2015
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-cxl linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-cxl
index 7970e3713e70..818f55970efb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-cxl
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-cxl
@@ -72,11 +72,16 @@ Description:    read/write
                 when performing the START_WORK ioctl. Only applicable when
                 running under hashed page table mmu.
                 Possible values:
-                        none: No prefaulting (default)
-                        work_element_descriptor: Treat the work element
-                                 descriptor as an effective address and
-                                 prefault what it points to.
-                        all: all segments process calling START_WORK maps.
+
+                =======================  ======================================
+		none			 No prefaulting (default)
+		work_element_descriptor  Treat the work element
+					 descriptor as an effective address and
+					 prefault what it points to.
+                all			 all segments process calling
+					 START_WORK maps.
+                =======================  ======================================
+
 Users:		https://github.com/ibm-capi/libcxl
 
 What:           /sys/class/cxl/<afu>/reset
@@ -212,6 +217,7 @@ Description:    read/write
                 card.  A power cycle is required to load the image.
                 "none" could be useful for debugging because the trace arrays
                 are preserved.
+
                 "user" and "factory" means PERST will cause either the user or
                 user or factory image to be loaded.
                 Default is to reload on PERST whichever image the card has
@@ -235,8 +241,11 @@ Contact:	linuxppc-dev@lists.ozlabs.org
 Description:	read/write
 		Trust that when an image is reloaded via PERST, it will not
 		have changed.
-		0 = don't trust, the image may be different (default)
-		1 = trust that the image will not change.
+
+		==  =================================================
+		0   don't trust, the image may be different (default)
+		1   trust that the image will not change.
+		==  =================================================
 Users:		https://github.com/ibm-capi/libcxl
 
 What:           /sys/class/cxl/<card>/psl_timebase_synced
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index deefffb3bbe4..b8ebff4b1c4c 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -62,7 +62,8 @@ Description:
 		driver should provide the list of available frequencies
 		with its profile. If need to reset the statistics of devfreq
 		behavior on a specific device, enter 0(zero) to 'trans_stat'
-		as following:
+		as following::
+
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
 What:		/sys/class/devfreq/.../userspace/set_freq
@@ -117,6 +118,7 @@ Description:
 		This work timer is used by devfreq workqueue in order to
 		monitor the device status such as utilization. The user
 		can change the work timer on runtime according to their demand
-		as following:
+		as following::
+
 			echo deferrable > /sys/class/devfreq/.../timer
 			echo delayed > /sys/class/devfreq/.../timer
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-devlink linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-devlink
index 64791b65c9a3..b662f747c83e 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-devlink
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-devlink
@@ -18,9 +18,9 @@ Description:
 
 		This will be one of the following strings:
 
-		'consumer unbind'
-		'supplier unbind'
-		'never'
+		- 'consumer unbind'
+		- 'supplier unbind'
+		- 'never'
 
 		'consumer unbind' means the device link will be removed when
 		the consumer's driver is unbound from the consumer device.
@@ -49,8 +49,10 @@ Description:
 
 		This will be one of the following strings:
 
-		'0' - Does not affect runtime power management
-		'1' - Affects runtime power management
+		===   ========================================
+		'0'   Does not affect runtime power management
+		'1'   Affects runtime power management
+		===   ========================================
 
 What:		/sys/class/devlink/.../status
 Date:		May 2020
@@ -68,13 +70,13 @@ Description:
 
 		This will be one of the following strings:
 
-		'not tracked'
-		'dormant'
-		'available'
-		'consumer probing'
-		'active'
-		'supplier unbinding'
-		'unknown'
+		- 'not tracked'
+		- 'dormant'
+		- 'available'
+		- 'consumer probing'
+		- 'active'
+		- 'supplier unbinding'
+		- 'unknown'
 
 		'not tracked' means this device link does not track the status
 		and has no impact on the binding, unbinding and syncing the
@@ -114,8 +116,10 @@ Description:
 
 		This will be one of the following strings:
 
+		===  ================================
 		'0'
-		'1' - Affects runtime power management
+		'1'  Affects runtime power management
+		===  ================================
 
 		'0' means the device link can affect other device behaviors
 		like binding/unbinding, suspend/resume, runtime power
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-extcon linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-extcon
index 57a726232912..fde0fecd5de9 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-extcon
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-extcon
@@ -39,19 +39,22 @@ Description:
 		callback.
 
 		If the default callback for showing function is used, the
-		format is like this:
-		# cat state
-		USB_OTG=1
-		HDMI=0
-		TA=1
-		EAR_JACK=0
-		#
+		format is like this::
+
+		    # cat state
+		    USB_OTG=1
+		    HDMI=0
+		    TA=1
+		    EAR_JACK=0
+		    #
+
 		In this example, the extcon device has USB_OTG and TA
 		cables attached and HDMI and EAR_JACK cables detached.
 
 		In order to update the state of an extcon device, enter a hex
-		state number starting with 0x:
-		# echo 0xHEX > state
+		state number starting with 0x::
+
+		    # echo 0xHEX > state
 
 		This updates the whole state of the extcon device.
 		Inputs of all the methods are required to meet the
@@ -84,12 +87,13 @@ Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		Shows the relations of mutually exclusiveness. For example,
 		if the mutually_exclusive array of extcon device is
-		{0x3, 0x5, 0xC, 0x0}, then the output is:
-		# ls mutually_exclusive/
-		0x3
-		0x5
-		0xc
-		#
+		{0x3, 0x5, 0xC, 0x0}, then the output is::
+
+		    # ls mutually_exclusive/
+		    0x3
+		    0x5
+		    0xc
+		    #
 
 		Note that mutually_exclusive is a sub-directory of the extcon
 		device and the file names under the mutually_exclusive
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-fpga-manager linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-fpga-manager
index 5284fa33d4c5..d78689c357a5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-fpga-manager
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-fpga-manager
@@ -28,8 +28,7 @@ Description:	Read fpga manager state as a string.
 		* firmware request	= firmware class request in progress
 		* firmware request error = firmware request failed
 		* write init		= preparing FPGA for programming
-		* write init error	= Error while preparing FPGA for
-					  programming
+		* write init error	= Error while preparing FPGA for programming
 		* write			= FPGA ready to receive image data
 		* write error		= Error while programming
 		* write complete	= Doing post programming steps
@@ -47,7 +46,7 @@ Description:	Read fpga manager status as a string.
 		programming errors to userspace. This is a list of strings for
 		the supported status.
 
-		* reconfig operation error 	- invalid operations detected by
+		* reconfig operation error	- invalid operations detected by
 						  reconfiguration hardware.
 						  e.g. start reconfiguration
 						  with errors not cleared
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-gnss linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-gnss
index 2467b6900eae..c8553d972edd 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-gnss
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-gnss
@@ -6,9 +6,11 @@ Description:
 		The GNSS receiver type. The currently identified types reflect
 		the protocol(s) supported by the receiver:
 
+			======		===========
 			"NMEA"		NMEA 0183
 			"SiRF"		SiRF Binary
 			"UBX"		UBX
+			======		===========
 
 		Note that also non-"NMEA" type receivers typically support a
 		subset of NMEA 0183 with vendor extensions (e.g. to allow
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led
index 5f67f7ab277b..2e24ac3bd7ef 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led
@@ -3,9 +3,26 @@ Date:		March 2006
 KernelVersion:	2.6.17
 Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
-		Set the brightness of the LED. Most LEDs don't
-		have hardware brightness support, so will just be turned on for
-		non-zero brightness settings. The value is between 0 and
+		Set the brightness of the LED.
+
+		Most LEDs don't have hardware brightness support, so will
+		just be turned on for non-zero brightness settings.
+
+		.. Note::
+
+		  For multicolor LEDs, writing to this file will update all
+		  LEDs within the group to a calculated percentage of what
+		  each color LED intensity is set to.
+
+		  The percentage is calculated for each grouped LED via
+		  the equation below::
+
+		    led_brightness = brightness * multi_intensity/max_brightness
+
+		  For additional details please refer to
+		  Documentation/leds/leds-class-multicolor.rst.
+
+		The value is between 0 and
 		/sys/class/leds/<led>/max_brightness.
 
 		Writing 0 to this file clears active trigger.
@@ -13,6 +30,8 @@ Description:
 		Writing non-zero to this file while trigger is active changes the
 		top brightness trigger is going to use.
 
+
+
 What:		/sys/class/leds/<led>/max_brightness
 Date:		March 2006
 KernelVersion:	2.6.17
@@ -47,10 +66,11 @@ Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
 		Set the trigger for this LED. A trigger is a kernel based source
 		of LED events.
+
 		You can change triggers in a similar manner to the way an IO
 		scheduler is chosen. Trigger specific parameters can appear in
 		/sys/class/leds/<led> once a given trigger is selected. For
-		their documentation see sysfs-class-led-trigger-*.
+		their documentation see `sysfs-class-led-trigger-*`.
 
 What:		/sys/class/leds/<led>/inverted
 Date:		January 2011
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
index f520ece9b64c..04f3ffdc5936 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
@@ -1,133 +1,3 @@
-What:		/sys/class/leds/<led>/hw_pattern
-Date:		September 2019
-KernelVersion:	5.5
-Description:
-		Specify a hardware pattern for the EL15203000 LED.
-		The LEDs board supports only predefined patterns by firmware
-		for specific LEDs.
-
-		Breathing mode for Screen frame light tube:
-		"0 4000 1 4000"
-
-		    ^
-		    |
-		Max-|     ---
-		    |    /   \
-		    |   /     \
-		    |  /       \     /
-		    | /         \   /
-		Min-|-           ---
-		    |
-		    0------4------8--> time (sec)
-
-		Cascade mode for Pipe LED:
-		"1 800 2 800 4 800 8 800 16 800"
-
-		      ^
-		      |
-		0 On -|----+                   +----+                   +---
-		      |    |                   |    |                   |
-		  Off-|    +-------------------+    +-------------------+
-		      |
-		1 On -|    +----+                   +----+
-		      |    |    |                   |    |
-		  Off |----+    +-------------------+    +------------------
-		      |
-		2 On -|         +----+                   +----+
-		      |         |    |                   |    |
-		  Off-|---------+    +-------------------+    +-------------
-		      |
-		3 On -|              +----+                   +----+
-		      |              |    |                   |    |
-		  Off-|--------------+    +-------------------+    +--------
-		      |
-		4 On -|                   +----+                   +----+
-		      |                   |    |                   |    |
-		  Off-|-------------------+    +-------------------+    +---
-		      |
-		      0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
-
-		Inverted cascade mode for Pipe LED:
-		"30 800 29 800 27 800 23 800 15 800"
-
-		      ^
-		      |
-		0 On -|    +-------------------+    +-------------------+
-		      |    |                   |    |                   |
-		  Off-|----+                   +----+                   +---
-		      |
-		1 On -|----+    +-------------------+    +------------------
-		      |    |    |                   |    |
-		  Off |    +----+                   +----+
-		      |
-		2 On -|---------+    +-------------------+    +-------------
-		      |         |    |                   |    |
-		  Off-|         +----+                   +----+
-		      |
-		3 On -|--------------+    +-------------------+    +--------
-		      |              |    |                   |    |
-		  Off-|              +----+                   +----+
-		      |
-		4 On -|-------------------+    +-------------------+    +---
-		      |                   |    |                   |    |
-		  Off-|                   +----+                   +----+
-		      |
-		      0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
-
-		Bounce mode for Pipe LED:
-		"1 800 2 800 4 800 8 800 16 800 16 800 8 800 4 800 2 800 1 800"
-
-		      ^
-		      |
-		0 On -|----+                                       +--------
-		      |    |                                       |
-		  Off-|    +---------------------------------------+
-		      |
-		1 On -|    +----+                             +----+
-		      |    |    |                             |    |
-		  Off |----+    +-----------------------------+    +--------
-		      |
-		2 On -|         +----+                   +----+
-		      |         |    |                   |    |
-		  Off-|---------+    +-------------------+    +-------------
-		      |
-		3 On -|              +----+         +----+
-		      |              |    |         |    |
-		  Off-|--------------+    +---------+    +------------------
-		      |
-		4 On -|                   +---------+
-		      |                   |         |
-		  Off-|-------------------+         +-----------------------
-		      |
-		      0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
-
-		Inverted bounce mode for Pipe LED:
-		"30 800 29 800 27 800 23 800 15 800 15 800 23 800 27 800 29 800 30 800"
-
-		      ^
-		      |
-		0 On -|    +---------------------------------------+
-		      |    |                                       |
-		  Off-|----+                                       +--------
-		      |
-		1 On -|----+    +-----------------------------+    +--------
-		      |    |    |                             |    |
-		  Off |    +----+                             +----+
-		      |
-		2 On -|---------+    +-------------------+    +-------------
-		      |         |    |                   |    |
-		  Off-|         +----+                   +----+
-		      |
-		3 On -|--------------+    +---------+    +------------------
-		      |              |    |         |    |
-		  Off-|              +----+         +----+
-		      |
-		4 On -|-------------------+         +-----------------------
-		      |                   |         |
-		  Off-|                   +---------+
-		      |
-		      0---0.8--1.6--2.4--3.2---4---4.8--5.6--6.4--7.2---8--> time (sec)
-
 What:		/sys/class/leds/<led>/repeat
 Date:		September 2019
 KernelVersion:	5.5
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
index e4c89b261546..e38a835d0a85 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
@@ -6,8 +6,10 @@ Description:
 		Set the ALS output channel to use as input in
 		ALS-current-control mode (1, 2), where:
 
-		1 - out_current1
-		2 - out_current2
+		==  ============
+		1   out_current1
+		2   out_current2
+		==  ============
 
 What:		/sys/class/leds/<led>/als_en
 Date:		May 2012
@@ -24,14 +26,16 @@ Contact:	Johan Hovold <jhovold@gmail.com>
 Description:
 		Set the pattern generator fall and rise times (0..7), where:
 
-		0 - 2048 us
-		1 - 262 ms
-		2 - 524 ms
-		3 - 1.049 s
-		4 - 2.097 s
-		5 - 4.194 s
-		6 - 8.389 s
-		7 - 16.78 s
+		==  =======
+		0   2048 us
+		1   262 ms
+		2   524 ms
+		3   1.049 s
+		4   2.097 s
+		5   4.194 s
+		6   8.389 s
+		7   16.78 s
+		==  =======
 
 What:		/sys/class/leds/<led>/id
 Date:		April 2012
@@ -47,8 +51,10 @@ Contact:	Johan Hovold <jhovold@gmail.com>
 Description:
 		Set the brightness-mapping mode (0, 1), where:
 
-		0 - exponential mode
-		1 - linear mode
+		==  ================
+		0   exponential mode
+		1   linear mode
+		==  ================
 
 What:		/sys/class/leds/<led>/pwm
 Date:		April 2012
@@ -57,9 +63,11 @@ Contact:	Johan Hovold <jhovold@gmail.com>
 Description:
 		Set the PWM-input control mask (5 bits), where:
 
-		bit 5 - PWM-input enabled in Zone 4
-		bit 4 - PWM-input enabled in Zone 3
-		bit 3 - PWM-input enabled in Zone 2
-		bit 2 - PWM-input enabled in Zone 1
-		bit 1 - PWM-input enabled in Zone 0
-		bit 0 - PWM-input enabled
+		=====  ===========================
+		bit 5  PWM-input enabled in Zone 4
+		bit 4  PWM-input enabled in Zone 3
+		bit 3  PWM-input enabled in Zone 2
+		bit 2  PWM-input enabled in Zone 1
+		bit 1  PWM-input enabled in Zone 0
+		bit 0  PWM-input enabled
+		=====  ===========================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
deleted file mode 100644
index 45b1e605d355..000000000000
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
+++ /dev/null
@@ -1,22 +0,0 @@
-What:		/sys/class/leds/<led>/hw_pattern
-Date:		September 2018
-KernelVersion:	4.20
-Description:
-		Specify a hardware pattern for the SC27XX LED. For the SC27XX
-		LED controller, it only supports 4 stages to make a single
-		hardware pattern, which is used to configure the rise time,
-		high time, fall time and low time for the breathing mode.
-
-		For the breathing mode, the SC27XX LED only expects one brightness
-		for the high stage. To be compatible with the hardware pattern
-		format, we should set brightness as 0 for rise stage, fall
-		stage and low stage.
-
-		Min stage duration: 125 ms
-		Max stage duration: 31875 ms
-
-		Since the stage duration step is 125 ms, the duration should be
-		a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms.
-
-		Thus the format of the hardware pattern values should be:
-		"0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-flash linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-flash
index 220a0270b47b..11e5677c3672 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-flash
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-flash
@@ -55,26 +55,35 @@ Description:	read only
 		Flash faults are re-read after strobing the flash. Possible
 		flash faults:
 
-		* led-over-voltage - flash controller voltage to the flash LED
+		* led-over-voltage
+			flash controller voltage to the flash LED
 			has exceeded the limit specific to the flash controller
-		* flash-timeout-exceeded - the flash strobe was still on when
+		* flash-timeout-exceeded
+			the flash strobe was still on when
 			the timeout set by the user has expired; not all flash
 			controllers may set this in all such conditions
-		* controller-over-temperature - the flash controller has
+		* controller-over-temperature
+			the flash controller has
 			overheated
-		* controller-short-circuit - the short circuit protection
+		* controller-short-circuit
+			the short circuit protection
 			of the flash controller has been triggered
-		* led-power-supply-over-current - current in the LED power
+		* led-power-supply-over-current
+			current in the LED power
 			supply has exceeded the limit specific to the flash
 			controller
-		* indicator-led-fault - the flash controller has detected
+		* indicator-led-fault
+			the flash controller has detected
 			a short or open circuit condition on the indicator LED
-		* led-under-voltage - flash controller voltage to the flash
+		* led-under-voltage
+			flash controller voltage to the flash
 			LED has been below the minimum limit specific to
 			the flash
-		* controller-under-voltage - the input voltage of the flash
+		* controller-under-voltage
+			the input voltage of the flash
 			controller is below the limit under which strobing the
 			flash at full current will not be possible;
 			the condition persists until this flag is no longer set
-		* led-over-temperature - the temperature of the LED has exceeded
+		* led-over-temperature
+			the temperature of the LED has exceeded
 			its allowed upper limit
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-multicolor linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-multicolor
index eeeddcbdbbe3..16fc827b10cb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-multicolor
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-multicolor
@@ -1,20 +1,3 @@
-What:		/sys/class/leds/<led>/brightness
-Date:		March 2020
-KernelVersion:	5.9
-Contact:	Dan Murphy <dmurphy@ti.com>
-Description:	read/write
-		Writing to this file will update all LEDs within the group to a
-		calculated percentage of what each color LED intensity is set
-		to. The percentage is calculated for each grouped LED via the
-		equation below:
-
-		led_brightness = brightness * multi_intensity/max_brightness
-
-		For additional details please refer to
-		Documentation/leds/leds-class-multicolor.rst.
-
-		The value of the LED is from 0 to
-		/sys/class/leds/<led>/max_brightness.
 
 What:		/sys/class/leds/<led>/multi_index
 Date:		March 2020
@@ -25,6 +8,9 @@ Description:	read
 		as an array of strings as they are indexed in the
 		multi_intensity file.
 
+		For additional details please refer to
+		Documentation/leds/leds-class-multicolor.rst.
+
 What:		/sys/class/leds/<led>/multi_intensity
 Date:		March 2020
 KernelVersion:	5.9
@@ -33,3 +19,6 @@ Description:	read/write
 		This file contains array of integers. Order of components is
 		described by the multi_index array. The maximum intensity should
 		not exceed /sys/class/leds/<led>/max_brightness.
+
+		For additional details please refer to
+		Documentation/leds/leds-class-multicolor.rst.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
index 451af6d6768c..646540950e38 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -19,18 +19,23 @@ KernelVersion:	4.16
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Signal the link state of the named network device.
+
 		If set to 0 (default), the LED's normal state is off.
+
 		If set to 1, the LED's normal state reflects the link state
 		of the named network device.
 		Setting this value also immediately changes the LED state.
 
+
 What:		/sys/class/leds/<led>/tx
 Date:		Dec 2017
 KernelVersion:	4.16
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Signal transmission of data on the named network device.
+
 		If set to 0 (default), the LED will not blink on transmission.
+
 		If set to 1, the LED will blink for the milliseconds specified
 		in interval to signal transmission.
 
@@ -40,6 +45,8 @@ KernelVersion:	4.16
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Signal reception of data on the named network device.
+
 		If set to 0 (default), the LED will not blink on reception.
+
 		If set to 1, the LED will blink for the milliseconds specified
 		in interval to signal reception.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-pattern linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
index bd92ef9d6faa..d91a07767adf 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
@@ -23,8 +23,8 @@ Description:
 
 		Since different LED hardware can have different semantics of
 		hardware patterns, each driver is expected to provide its own
-		description for the hardware patterns in their ABI documentation
-		file.
+		description for the hardware patterns in their documentation
+		file at Documentation/leds/.
 
 What:		/sys/class/leds/<led>/repeat
 Date:		September 2018
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-usbport linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
index f440e690daef..eb81152b8348 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
@@ -8,5 +8,6 @@ Description:
 		selected for the USB port trigger. Selecting ports makes trigger
 		observing them for any connected devices and lighting on LED if
 		there are any.
+
 		Echoing "1" value selects USB port. Echoing "0" unselects it.
 		Current state can be also read.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-leds-gt683r linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-leds-gt683r
index 6adab27f646e..b57ffb26e722 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-leds-gt683r
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-leds-gt683r
@@ -7,9 +7,11 @@ Description:
 		of one LED will update the mode of its two sibling devices as
 		well. Possible values are:
 
-		0 - normal
-		1 - audio
-		2 - breathing
+		==  =========
+		0   normal
+		1   audio
+		2   breathing
+		==  =========
 
 		Normal: LEDs are fully on when enabled
 		Audio:  LEDs brightness depends on sound level
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-mic linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-mic
index 6ef682603179..bd0e780c3760 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-mic
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-mic
@@ -41,24 +41,33 @@ Description:
 		When read, this entry provides the current state of an Intel
 		MIC device in the context of the card OS. Possible values that
 		will be read are:
-		"ready" - The MIC device is ready to boot the card OS. On
-		reading this entry after an OSPM resume, a "boot" has to be
-		written to this entry if the card was previously shutdown
-		during OSPM suspend.
-		"booting" - The MIC device has initiated booting a card OS.
-		"online" - The MIC device has completed boot and is online
-		"shutting_down" - The card OS is shutting down.
-		"resetting" - A reset has been initiated for the MIC device
-		"reset_failed" - The MIC device has failed to reset.
+
+
+		===============  ===============================================
+		"ready"		 The MIC device is ready to boot the card OS.
+				 On reading this entry after an OSPM resume,
+				 a "boot" has to be written to this entry if
+				 the card was previously shutdown during OSPM
+				 suspend.
+		"booting"	 The MIC device has initiated booting a card OS.
+		"online"	 The MIC device has completed boot and is online
+		"shutting_down"	 The card OS is shutting down.
+		"resetting"	 A reset has been initiated for the MIC device
+		"reset_failed"	 The MIC device has failed to reset.
+		===============  ===============================================
 
 		When written, this sysfs entry triggers different state change
 		operations depending upon the current state of the card OS.
 		Acceptable values are:
-		"boot" - Boot the card OS image specified by the combination
-			 of firmware, ramdisk, cmdline and bootmode
-			sysfs entries.
-		"reset" - Initiates device reset.
-		"shutdown" - Initiates card OS shutdown.
+
+
+		==========  ===================================================
+		"boot"      Boot the card OS image specified by the combination
+			    of firmware, ramdisk, cmdline and bootmode
+			    sysfs entries.
+		"reset"     Initiates device reset.
+		"shutdown"  Initiates card OS shutdown.
+		==========  ===================================================
 
 What:		/sys/class/mic/mic(x)/shutdown_status
 Date:		October 2013
@@ -69,12 +78,15 @@ Description:
 		OS can shutdown because of various reasons. When read, this
 		entry provides the status on why the card OS was shutdown.
 		Possible values are:
-		"nop" -  shutdown status is not applicable, when the card OS is
-			"online"
-		"crashed" - Shutdown because of a HW or SW crash.
-		"halted" - Shutdown because of a halt command.
-		"poweroff" - Shutdown because of a poweroff command.
-		"restart" - Shutdown because of a restart command.
+
+		==========  ===================================================
+		"nop"       shutdown status is not applicable, when the card OS
+			    is "online"
+		"crashed"   Shutdown because of a HW or SW crash.
+		"halted"    Shutdown because of a halt command.
+		"poweroff"  Shutdown because of a poweroff command.
+		"restart"   Shutdown because of a restart command.
+		==========  ===================================================
 
 What:		/sys/class/mic/mic(x)/cmdline
 Date:		October 2013
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-net linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-net
index 3b404577f380..1f2002df5ba2 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-net
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-net
@@ -4,10 +4,13 @@ KernelVersion:	3.17
 Contact:	netdev@vger.kernel.org
 Description:
 		Indicates the name assignment type. Possible values are:
-		1: enumerated by the kernel, possibly in an unpredictable way
-		2: predictably named by the kernel
-		3: named by userspace
-		4: renamed
+
+		== ==========================================================
+		1  enumerated by the kernel, possibly in an unpredictable way
+		2  predictably named by the kernel
+		3  named by userspace
+		4  renamed
+		== ==========================================================
 
 What:		/sys/class/net/<iface>/addr_assign_type
 Date:		July 2010
@@ -15,10 +18,13 @@ KernelVersion:	3.2
 Contact:	netdev@vger.kernel.org
 Description:
 		Indicates the address assignment type. Possible values are:
-		0: permanent address
-		1: randomly generated
-		2: stolen from another device
-		3: set using dev_set_mac_address
+
+		== =============================
+		0  permanent address
+		1  randomly generated
+		2  stolen from another device
+		3  set using dev_set_mac_address
+		== =============================
 
 What:		/sys/class/net/<iface>/addr_len
 Date:		April 2005
@@ -51,9 +57,12 @@ Description:
 		Default value 0 does not forward any link local frames.
 
 		Restricted bits:
-		0: 01-80-C2-00-00-00 Bridge Group Address used for STP
-		1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
-		2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
+
+		== ========================================================
+		0  01-80-C2-00-00-00 Bridge Group Address used for STP
+		1  01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
+		2  01-80-C2-00-00-02 (Link Aggregation) 802.3ad
+		== ========================================================
 
 		Any values not setting these bits can be used. Take special
 		care when forwarding control frames e.g. 802.1X-PAE or LLDP.
@@ -74,8 +83,11 @@ Contact:	netdev@vger.kernel.org
 Description:
 		Indicates the current physical link state of the interface.
 		Posssible values are:
-		0: physical link is down
-		1: physical link is up
+
+		== =====================
+		0  physical link is down
+		1  physical link is up
+		== =====================
 
 		Note: some special devices, e.g: bonding and team drivers will
 		allow this attribute to be written to force a link state for
@@ -131,21 +143,27 @@ Contact:	netdev@vger.kernel.org
 Description:
 		Indicates whether the interface is under test. Possible
 		values are:
-		0: interface is not being tested
-		1: interface is being tested
+
+		== =============================
+		0  interface is not being tested
+		1  interface is being tested
+		== =============================
 
 		When an interface is under test, it cannot be expected
 		to pass packets as normal.
 
-What:		/sys/clas/net/<iface>/duplex
+What:		/sys/class/net/<iface>/duplex
 Date:		October 2009
 KernelVersion:	2.6.33
 Contact:	netdev@vger.kernel.org
 Description:
 		Indicates the interface latest or current duplex value. Possible
 		values are:
-		half: half duplex
-		full: full duplex
+
+		====  ===========
+		half  half duplex
+		full  full duplex
+		====  ===========
 
 		Note: This attribute is only valid for interfaces that implement
 		the ethtool get_link_ksettings method (mostly Ethernet).
@@ -196,8 +214,11 @@ Description:
 		Indicates the interface link mode, as a decimal number. This
 		attribute should be used in conjunction with 'dormant' attribute
 		to determine the interface usability. Possible values:
-		0: default link mode
-		1: dormant link mode
+
+		==  =================
+		0   default link mode
+		1   dormant link mode
+		==  =================
 
 What:		/sys/class/net/<iface>/mtu
 Date:		April 2005
@@ -226,7 +247,9 @@ KernelVersion:	2.6.17
 Contact:	netdev@vger.kernel.org
 Description:
 		Indicates the interface RFC2863 operational state as a string.
+
 		Possible values are:
+
 		"unknown", "notpresent", "down", "lowerlayerdown", "testing",
 		"dormant", "up".
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-net-cdc_ncm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
index f7be0e88b139..06416d0e163d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
@@ -91,9 +91,9 @@ Date:		May 2014
 KernelVersion:	3.16
 Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
-		Bit 0: 16-bit NTB supported (set to 1)
-		Bit 1: 32-bit NTB supported
-		Bits 2 – 15: reserved (reset to zero; must be ignored by host)
+		- Bit 0: 16-bit NTB supported (set to 1)
+		- Bit 1: 32-bit NTB supported
+		- Bits 2 – 15: reserved (reset to zero; must be ignored by host)
 
 What:		/sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize
 Date:		May 2014
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-net-phydev linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-net-phydev
index 206cbf538b59..40ced0ea4316 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-net-phydev
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-net-phydev
@@ -35,7 +35,9 @@ Description:
 		Ethernet driver during bus enumeration, encoded in string.
 		This interface mode is used to configure the Ethernet MAC with the
 		appropriate mode for its data lines to the PHY hardware.
+
 		Possible values are:
+
 		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
 		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
 		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-ocxl linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-ocxl
index ae1276efa45a..847a7edc3113 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-ocxl
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-ocxl
@@ -11,8 +11,11 @@ Contact:	linuxppc-dev@lists.ozlabs.org
 Description:	read only
 		Number of contexts for the AFU, in the format <n>/<max>
 		where:
-			n:	number of currently active contexts, for debug
-			max:	maximum number of contexts supported by the AFU
+
+			====	===============================================
+			n	number of currently active contexts, for debug
+			max	maximum number of contexts supported by the AFU
+			====	===============================================
 
 What:		/sys/class/ocxl/<afu name>/pp_mmio_size
 Date:		January 2018
@@ -40,7 +43,9 @@ Contact:	linuxppc-dev@lists.ozlabs.org
 Description:	read/write
 		Control whether the FPGA is reloaded on a link reset. Enabled
 		through a vendor-specific logic block on the FPGA.
-			0	Do not reload FPGA image from flash
-			1	Reload FPGA image from flash
-			unavailable
-				The device does not support this capability
+
+			===========  ===========================================
+			0	     Do not reload FPGA image from flash
+			1	     Reload FPGA image from flash
+			unavailable  The device does not support this capability
+			===========  ===========================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-pktcdvd linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-pktcdvd
index dde4f26d0780..ba1ce626591d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-pktcdvd
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-pktcdvd
@@ -11,15 +11,17 @@ KernelVersion:	2.6.20
 Contact:	Thomas Maier <balagi@justmail.de>
 Description:
 
-		add:		(WO) Write a block device id (major:minor) to
+		==========	==============================================
+		add		(WO) Write a block device id (major:minor) to
 				create a new pktcdvd device and map it to the
 				block device.
 
-		remove:		(WO) Write the pktcdvd device id (major:minor)
+		remove		(WO) Write the pktcdvd device id (major:minor)
 				to remove the pktcdvd device.
 
-		device_map:	(RO) Shows the device mapping in format:
+		device_map	(RO) Shows the device mapping in format:
 				pktcdvd[0-7] <pktdevid> <blkdevid>
+		==========	==============================================
 
 
 What:		/sys/class/pktcdvd/pktcdvd[0-7]/dev
@@ -65,29 +67,31 @@ Date:		Oct. 2006
 KernelVersion:	2.6.20
 Contact:	Thomas Maier <balagi@justmail.de>
 Description:
-		size:		(RO) Contains the size of the bio write queue.
+		==============	================================================
+		size		(RO) Contains the size of the bio write queue.
 
-		congestion_off:	(RW) If bio write queue size is below this mark,
+		congestion_off	(RW) If bio write queue size is below this mark,
 				accept new bio requests from the block layer.
 
-		congestion_on:	(RW) If bio write queue size is higher as this
+		congestion_on	(RW) If bio write queue size is higher as this
 				mark, do no longer accept bio write requests
 				from the block layer and wait till the pktcdvd
 				device has processed enough bio's so that bio
 				write queue size is below congestion off mark.
 				A value of <= 0 disables congestion control.
+		==============	================================================
 
 
 Example:
 --------
-To use the pktcdvd sysfs interface directly, you can do:
-
-# create a new pktcdvd device mapped to /dev/hdc
-echo "22:0" >/sys/class/pktcdvd/add
-cat /sys/class/pktcdvd/device_map
-# assuming device pktcdvd0 was created, look at stat's
-cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
-# print the device id of the mapped block device
-fgrep pktcdvd0 /sys/class/pktcdvd/device_map
-# remove device, using pktcdvd0 device id   253:0
-echo "253:0" >/sys/class/pktcdvd/remove
+To use the pktcdvd sysfs interface directly, you can do::
+
+    # create a new pktcdvd device mapped to /dev/hdc
+    echo "22:0" >/sys/class/pktcdvd/add
+    cat /sys/class/pktcdvd/device_map
+    # assuming device pktcdvd0 was created, look at stat's
+    cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
+    # print the device id of the mapped block device
+    fgrep pktcdvd0 /sys/class/pktcdvd/device_map
+    # remove device, using pktcdvd0 device id   253:0
+    echo "253:0" >/sys/class/pktcdvd/remove
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power
index 40213c73bc9c..ca830c6cd809 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power
@@ -1,4 +1,4 @@
-===== General Properties =====
+**General Properties**
 
 What:		/sys/class/power_supply/<supply_name>/manufacturer
 Date:		May 2007
@@ -34,16 +34,240 @@ Description:
 		Describes the main type of the supply.
 
 		Access: Read
-		Valid values: "Battery", "UPS", "Mains", "USB"
+		Valid values: "Battery", "UPS", "Mains", "USB", "Wireless"
 
-===== Battery Properties =====
+**Battery and USB properties**
+
+What:		/sys/class/power_supply/<supply_name>/current_avg
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports an average IBAT current reading for the battery, over
+		  a fixed period. Normally devices will provide a fixed interval
+		  in which they average readings to smooth out the reported
+		  value.
+
+		USB:
+
+		  Reports an average IBUS current reading over a fixed period.
+		  Normally devices will provide a fixed interval in which they
+		  average readings to smooth out the reported value.
+
+		Access: Read
+
+		Valid values: Represented in microamps. Negative values are
+		used for discharging batteries, positive values for charging
+		batteries and for USB IBUS current.
+
+What:		/sys/class/power_supply/<supply_name>/current_max
+Date:		October 2010
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports the maximum IBAT current allowed into the battery.
+
+		USB:
+
+		  Reports the maximum IBUS current the supply can support.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What: 		/sys/class/power_supply/<supply_name>/current_now
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+
+		Battery:
+
+		  Reports an instant, single IBAT current reading for the
+		  battery. This value is not averaged/smoothed.
+
+		  Access: Read
+
+		USB:
+
+		  Reports the IBUS current supplied now. This value is generally
+		  read-only reporting, unless the 'online' state of the supply
+		  is set to be programmable, in which case this value can be set
+		  within the reported min/max range.
+
+		  Access: Read, Write
+
+		Valid values: Represented in microamps. Negative values are
+		used for discharging batteries, positive values for charging
+		batteries and for USB IBUS current.
+
+What:		/sys/class/power_supply/<supply_name>/temp
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports the current TBAT battery temperature reading.
+
+		USB:
+
+		  Reports the current supply temperature reading. This would
+		  normally be the internal temperature of the device itself
+		  (e.g TJUNC temperature of an IC)
+
+		Access: Read
+
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_alert_max
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Maximum TBAT temperature trip-wire value where the supply will
+		  notify user-space of the event.
+
+		USB:
+
+		  Maximum supply temperature trip-wire value where the supply
+		  will notify user-space of the event.
+
+		This is normally used for the charging scenario where
+		user-space needs to know if the temperature has crossed an
+		upper threshold so it can take appropriate action (e.g. warning
+		user that the temperature is critically high, and charging has
+		stopped).
+
+		Access: Read
+
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_alert_min
+Date:		July 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+
+		Battery:
+
+		  Minimum TBAT temperature trip-wire value where the supply will
+		  notify user-space of the event.
+
+		USB:
+
+		  Minimum supply temperature trip-wire value where the supply
+		  will notify user-space of the event.
+
+		This is normally used for the charging scenario where user-space
+		needs to know if the temperature has crossed a lower threshold
+		so it can take appropriate action (e.g. warning user that
+		temperature level is high, and charging current has been
+		reduced accordingly to remedy the situation).
+
+		Access: Read
+
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_max
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports the maximum allowed TBAT battery temperature for
+		  charging.
+
+		USB:
+
+		  Reports the maximum allowed supply temperature for operation.
+
+		Access: Read
+
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/temp_min
+Date:		July 2014
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports the minimum allowed TBAT battery temperature for
+		  charging.
+
+		USB:
+
+		  Reports the minimum allowed supply temperature for operation.
+
+		Access: Read
+
+		Valid values: Represented in 1/10 Degrees Celsius
+
+What:		/sys/class/power_supply/<supply_name>/voltage_max,
+Date:		January 2008
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports the maximum safe VBAT voltage permitted for the
+		  battery, during charging.
+
+		USB:
+
+		  Reports the maximum VBUS voltage the supply can support.
+
+		Access: Read
+
+		Valid values: Represented in microvolts
+
+What:		/sys/class/power_supply/<supply_name>/voltage_min,
+Date:		January 2008
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports the minimum safe VBAT voltage permitted for the
+		  battery, during discharging.
+
+		USB:
+
+		  Reports the minimum VBUS voltage the supply can support.
+
+		Access: Read
+
+		Valid values: Represented in microvolts
+
+What:		/sys/class/power_supply/<supply_name>/voltage_now,
+Date:		May 2007
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery:
+
+		  Reports an instant, single VBAT voltage reading for the
+		  battery. This value is not averaged/smoothed.
+
+		  Access: Read
+
+		USB:
+
+		  Reports the VBUS voltage supplied now. This value is generally
+		  read-only reporting, unless the 'online' state of the supply
+		  is set to be programmable, in which case this value can be set
+		  within the reported min/max range.
+
+		  Access: Read, Write
+
+		Valid values: Represented in microvolts
+
+**Battery Properties**
 
 What:		/sys/class/power_supply/<supply_name>/capacity
 Date:		May 2007
 Contact:	linux-pm@vger.kernel.org
 Description:
 		Fine grain representation of battery capacity.
+
 		Access: Read
+
 		Valid values: 0 - 100 (percent)
 
 What:		/sys/class/power_supply/<supply_name>/capacity_alert_max
@@ -58,6 +282,7 @@ Description:
 		low).
 
 		Access: Read, Write
+
 		Valid values: 0 - 100 (percent)
 
 What:		/sys/class/power_supply/<supply_name>/capacity_alert_min
@@ -72,6 +297,7 @@ Description:
 		critically low).
 
 		Access: Read, Write
+
 		Valid values: 0 - 100 (percent)
 
 What:		/sys/class/power_supply/<supply_name>/capacity_error_margin
@@ -87,6 +313,7 @@ Description:
 		completely useless.
 
 		Access: Read
+
 		Valid values: 0 - 100 (percent)
 
 What:		/sys/class/power_supply/<supply_name>/capacity_level
@@ -96,38 +323,10 @@ Description:
 		Coarse representation of battery capacity.
 
 		Access: Read
-		Valid values: "Unknown", "Critical", "Low", "Normal", "High",
-			      "Full"
-
-What:		/sys/class/power_supply/<supply_name>/current_avg
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports an average IBAT current reading for the battery, over a
-		fixed period. Normally devices will provide a fixed interval in
-		which they average readings to smooth out the reported value.
-
-		Access: Read
-		Valid values: Represented in microamps
 
-What:		/sys/class/power_supply/<supply_name>/current_max
-Date:		October 2010
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the maximum IBAT current allowed into the battery.
-
-		Access: Read
-		Valid values: Represented in microamps
-
-What:		/sys/class/power_supply/<supply_name>/current_now
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports an instant, single IBAT current reading for the battery.
-		This value is not averaged/smoothed.
-
-		Access: Read
-		Valid values: Represented in microamps
+		Valid values:
+			      "Unknown", "Critical", "Low", "Normal", "High",
+			      "Full"
 
 What:		/sys/class/power_supply/<supply_name>/charge_control_limit
 Date:		Oct 2012
@@ -137,6 +336,7 @@ Description:
 		throttling for thermal cooling or improving battery health.
 
 		Access: Read, Write
+
 		Valid values: Represented in microamps
 
 What:		/sys/class/power_supply/<supply_name>/charge_control_limit_max
@@ -146,6 +346,7 @@ Description:
 		Maximum legal value for the charge_control_limit property.
 
 		Access: Read
+
 		Valid values: Represented in microamps
 
 What:		/sys/class/power_supply/<supply_name>/charge_control_start_threshold
@@ -166,6 +367,7 @@ Description:
 		stop.
 
 		Access: Read, Write
+
 		Valid values: 0 - 100 (percent)
 
 What:		/sys/class/power_supply/<supply_name>/charge_type
@@ -181,7 +383,9 @@ Description:
 		different algorithm.
 
 		Access: Read, Write
-		Valid values: "Unknown", "N/A", "Trickle", "Fast", "Standard",
+
+		Valid values:
+			      "Unknown", "N/A", "Trickle", "Fast", "Standard",
 			      "Adaptive", "Custom"
 
 What:		/sys/class/power_supply/<supply_name>/charge_term_current
@@ -192,6 +396,7 @@ Description:
 		when the battery is considered full and charging should end.
 
 		Access: Read
+
 		Valid values: Represented in microamps
 
 What:		/sys/class/power_supply/<supply_name>/health
@@ -202,7 +407,9 @@ Description:
 		functionality.
 
 		Access: Read
-		Valid values: "Unknown", "Good", "Overheat", "Dead",
+
+		Valid values:
+			      "Unknown", "Good", "Overheat", "Dead",
 			      "Over voltage", "Unspecified failure", "Cold",
 			      "Watchdog timer expire", "Safety timer expire",
 			      "Over current", "Calibration required", "Warm",
@@ -216,6 +423,7 @@ Description:
 		for a battery charge cycle.
 
 		Access: Read
+
 		Valid values: Represented in microamps
 
 What:		/sys/class/power_supply/<supply_name>/present
@@ -225,9 +433,13 @@ Description:
 		Reports whether a battery is present or not in the system.
 
 		Access: Read
+
 		Valid values:
+
+			== =======
 			0: Absent
 			1: Present
+			== =======
 
 What:		/sys/class/power_supply/<supply_name>/status
 Date:		May 2007
@@ -238,7 +450,9 @@ Description:
 		used to enable/disable charging to the battery.
 
 		Access: Read, Write
-		Valid values: "Unknown", "Charging", "Discharging",
+
+		Valid values:
+			      "Unknown", "Charging", "Discharging",
 			      "Not charging", "Full"
 
 What:		/sys/class/power_supply/<supply_name>/technology
@@ -248,66 +462,11 @@ Description:
 		Describes the battery technology supported by the supply.
 
 		Access: Read
-		Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
-			      "NiCd", "LiMn"
-
-What:		/sys/class/power_supply/<supply_name>/temp
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the current TBAT battery temperature reading.
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
-
-What:		/sys/class/power_supply/<supply_name>/temp_alert_max
-Date:		July 2012
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Maximum TBAT temperature trip-wire value where the supply will
-		notify user-space of the event. This is normally used for the
-		battery charging scenario where user-space needs to know the
-		battery temperature has crossed an upper threshold so it can
-		take appropriate action (e.g. warning user that battery level is
-		critically high, and charging has stopped).
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
-
-What:		/sys/class/power_supply/<supply_name>/temp_alert_min
-Date:		July 2012
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Minimum TBAT temperature trip-wire value where the supply will
-		notify user-space of the event. This is normally used for the
-		battery charging scenario where user-space needs to know the
-		battery temperature has crossed a lower threshold so it can take
-		appropriate action (e.g. warning user that battery level is
-		high, and charging current has been reduced accordingly to
-		remedy the situation).
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
-
-What:		/sys/class/power_supply/<supply_name>/temp_max
-Date:		July 2014
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the maximum allowed TBAT battery temperature for
-		charging.
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
 
-What:		/sys/class/power_supply/<supply_name>/temp_min
-Date:		July 2014
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the minimum allowed TBAT battery temperature for
-		charging.
+		Valid values:
+			      "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
+			      "NiCd", "LiMn"
 
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
 
 What:		/sys/class/power_supply/<supply_name>/voltage_avg,
 Date:		May 2007
@@ -318,72 +477,10 @@ Description:
 		which they average readings to smooth out the reported value.
 
 		Access: Read
-		Valid values: Represented in microvolts
-
-What:		/sys/class/power_supply/<supply_name>/voltage_max,
-Date:		January 2008
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the maximum safe VBAT voltage permitted for the battery,
-		during charging.
-
-		Access: Read
-		Valid values: Represented in microvolts
 
-What:		/sys/class/power_supply/<supply_name>/voltage_min,
-Date:		January 2008
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the minimum safe VBAT voltage permitted for the battery,
-		during discharging.
-
-		Access: Read
 		Valid values: Represented in microvolts
 
-What:		/sys/class/power_supply/<supply_name>/voltage_now,
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports an instant, single VBAT voltage reading for the battery.
-		This value is not averaged/smoothed.
-
-		Access: Read
-		Valid values: Represented in microvolts
-
-===== USB Properties =====
-
-What: 		/sys/class/power_supply/<supply_name>/current_avg
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports an average IBUS current reading over a fixed period.
-		Normally devices will provide a fixed interval in which they
-		average readings to smooth out the reported value.
-
-		Access: Read
-		Valid values: Represented in microamps
-
-
-What: 		/sys/class/power_supply/<supply_name>/current_max
-Date:		October 2010
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the maximum IBUS current the supply can support.
-
-		Access: Read
-		Valid values: Represented in microamps
-
-What: 		/sys/class/power_supply/<supply_name>/current_now
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the IBUS current supplied now. This value is generally
-		read-only reporting, unless the 'online' state of the supply
-		is set to be programmable, in which case this value can be set
-		within the reported min/max range.
-
-		Access: Read, Write
-		Valid values: Represented in microamps
+**USB Properties**
 
 What:		/sys/class/power_supply/<supply_name>/input_current_limit
 Date:		July 2014
@@ -397,6 +494,7 @@ Description:
 		solved using power limit use input_current_limit.
 
 		Access: Read, Write
+
 		Valid values: Represented in microamps
 
 What:		/sys/class/power_supply/<supply_name>/input_voltage_limit
@@ -414,6 +512,7 @@ Description:
 		solved using power limit use input_voltage_limit.
 
 		Access: Read, Write
+
 		Valid values: Represented in microvolts
 
 What:		/sys/class/power_supply/<supply_name>/input_power_limit
@@ -427,6 +526,7 @@ Description:
 		limit only for problems that can be solved using power limit.
 
 		Access: Read, Write
+
 		Valid values: Represented in microwatts
 
 What:		/sys/class/power_supply/<supply_name>/online,
@@ -439,69 +539,14 @@ Description:
 		USB supply so voltage and current can be controlled).
 
 		Access: Read, Write
+
 		Valid values:
+
+			== ==================================================
 			0: Offline
 			1: Online Fixed - Fixed Voltage Supply
 			2: Online Programmable - Programmable Voltage Supply
-
-What:		/sys/class/power_supply/<supply_name>/temp
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the current supply temperature reading. This would
-		normally be the internal temperature of the device itself (e.g
-		TJUNC temperature of an IC)
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
-
-What:		/sys/class/power_supply/<supply_name>/temp_alert_max
-Date:		July 2012
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Maximum supply temperature trip-wire value where the supply will
-		notify user-space of the event. This is normally used for the
-		charging scenario where user-space needs to know the supply
-		temperature has crossed an upper threshold so it can take
-		appropriate action (e.g. warning user that the supply
-		temperature is critically high, and charging has stopped to
-		remedy the situation).
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
-
-What:		/sys/class/power_supply/<supply_name>/temp_alert_min
-Date:		July 2012
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Minimum supply temperature trip-wire value where the supply will
-		notify user-space of the event. This is normally used for the
-		charging scenario where user-space needs to know the supply
-		temperature has crossed a lower threshold so it can take
-		appropriate action (e.g. warning user that the supply
-		temperature is high, and charging current has been reduced
-		accordingly to remedy the situation).
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
-
-What:		/sys/class/power_supply/<supply_name>/temp_max
-Date:		July 2014
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the maximum allowed supply temperature for operation.
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
-
-What:		/sys/class/power_supply/<supply_name>/temp_min
-Date:		July 2014
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the mainimum allowed supply temperature for operation.
-
-		Access: Read
-		Valid values: Represented in 1/10 Degrees Celsius
+			== ==================================================
 
 What: 		/sys/class/power_supply/<supply_name>/usb_type
 Date:		March 2018
@@ -512,40 +557,12 @@ Description:
 		is attached.
 
 		Access: Read-Only
-		Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
-			      "PD_DRP", "PD_PPS", "BrickID"
-
-What: 		/sys/class/power_supply/<supply_name>/voltage_max
-Date:		January 2008
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the maximum VBUS voltage the supply can support.
-
-		Access: Read
-		Valid values: Represented in microvolts
-
-What: 		/sys/class/power_supply/<supply_name>/voltage_min
-Date:		January 2008
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the minimum VBUS voltage the supply can support.
 
-		Access: Read
-		Valid values: Represented in microvolts
-
-What: 		/sys/class/power_supply/<supply_name>/voltage_now
-Date:		May 2007
-Contact:	linux-pm@vger.kernel.org
-Description:
-		Reports the VBUS voltage supplied now. This value is generally
-		read-only reporting, unless the 'online' state of the supply
-		is set to be programmable, in which case this value can be set
-		within the reported min/max range.
-
-		Access: Read, Write
-		Valid values: Represented in microvolts
+		Valid values:
+			      "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
+			      "PD_DRP", "PD_PPS", "BrickID"
 
-===== Device Specific Properties =====
+**Device Specific Properties**
 
 What:		/sys/class/power/ds2760-battery.*/charge_now
 Date:		May 2010
@@ -579,6 +596,7 @@ Description:
 		will drop to 0 A) and will trigger interrupt.
 
 		Valid values:
+
 		- 5, 6 or 7 (hours),
 		- 0: disabled.
 
@@ -593,6 +611,7 @@ Description:
 		will drop to 0 A) and will trigger interrupt.
 
 		Valid values:
+
 		- 4 - 16 (hours), step by 2 (rounded down)
 		- 0: disabled.
 
@@ -607,6 +626,7 @@ Description:
 		interrupt and start top-off charging mode.
 
 		Valid values:
+
 		- 100000 - 200000 (microamps), step by 25000 (rounded down)
 		- 200000 - 350000 (microamps), step by 50000 (rounded down)
 		- 0: disabled.
@@ -622,6 +642,7 @@ Description:
 		will drop to 0 A) and will trigger interrupt.
 
 		Valid values:
+
 		- 0 - 70 (minutes), step by 10 (rounded down)
 
 What:		/sys/class/power_supply/bq24257-charger/ovp_voltage
@@ -635,6 +656,7 @@ Description:
 		device datasheet for details.
 
 		Valid values:
+
 		- 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
 		  10500000 (all uV)
 
@@ -650,6 +672,7 @@ Description:
 		lower than the set value. See device datasheet for details.
 
 		Valid values:
+
 		- 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
 		  4760000 (all uV)
 
@@ -664,6 +687,7 @@ Description:
 		the charger operates normally. See device datasheet for details.
 
 		Valid values:
+
 		- 1: enabled
 		- 0: disabled
 
@@ -679,6 +703,7 @@ Description:
 		from the system. See device datasheet for details.
 
 		Valid values:
+
 		- 1: enabled
 		- 0: disabled
 
@@ -690,6 +715,7 @@ Description:
 		manufactured.
 
 		Access: Read
+
 		Valid values: Reported as integer
 
 What:		/sys/class/power_supply/<supply_name>/manufacture_month
@@ -699,6 +725,7 @@ Description:
 		Reports the month when the device has been manufactured.
 
 		Access: Read
+
 		Valid values: 1-12
 
 What:		/sys/class/power_supply/<supply_name>/manufacture_day
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power-mp2629 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power-mp2629
index 327a07e22805..914d67caac0d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power-mp2629
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power-mp2629
@@ -5,4 +5,5 @@ Description:
 		Represents a battery impedance compensation to accelerate charging.
 
                 Access: Read, Write
+
                 Valid values: Represented in milli-ohms. Valid range is [0, 140].
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power-twl4030 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power-twl4030
index b4fd32d210c5..b52f7023f8ba 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power-twl4030
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power-twl4030
@@ -4,18 +4,20 @@ Description:
 	Writing to this can disable charging.
 
 	Possible values are:
-		"auto" - draw power as appropriate for detected
-			 power source and battery status.
-		"off"  - do not draw any power.
-		"continuous"
-		       - activate mode described as "linear" in
-		         TWL data sheets.  This uses whatever
-			 current is available and doesn't switch off
-			 when voltage drops.
 
-			 This is useful for unstable power sources
-			 such as bicycle dynamo, but care should
-			 be taken that battery is not over-charged.
+		=============	===========================================
+		"auto"		draw power as appropriate for detected
+				power source and battery status.
+		"off"		do not draw any power.
+		"continuous"	activate mode described as "linear" in
+				TWL data sheets.  This uses whatever
+				current is available and doesn't switch off
+				when voltage drops.
+
+				This is useful for unstable power sources
+				such as bicycle dynamo, but care should
+				be taken that battery is not over-charged.
+		=============	===========================================
 
 What: /sys/class/power_supply/twl4030_ac/mode
 Description:
@@ -23,6 +25,9 @@ Description:
 	Writing to this can disable charging.
 
 	Possible values are:
-		"auto" - draw power as appropriate for detected
-			 power source and battery status.
-		"off"  - do not draw any power.
+
+		======	===========================================
+		"auto"	draw power as appropriate for detected
+			power source and battery status.
+		"off"	do not draw any power.
+		======	===========================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power-wilco linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power-wilco
index 84fde1d0ada0..82af180fcaab 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-power-wilco
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-power-wilco
@@ -4,17 +4,23 @@ KernelVersion:	5.2
 Description:
 		What charging algorithm to use:
 
-		Standard: Fully charges battery at a standard rate.
-		Adaptive: Battery settings adaptively optimized based on
+		Standard:
+			Fully charges battery at a standard rate.
+		Adaptive:
+			Battery settings adaptively optimized based on
 			typical battery usage pattern.
-		Fast: Battery charges over a shorter period.
-		Trickle: Extends battery lifespan, intended for users who
+		Fast:
+			Battery charges over a shorter period.
+		Trickle:
+			Extends battery lifespan, intended for users who
 			primarily use their Chromebook while connected to AC.
-		Custom: A low and high threshold percentage is specified.
+		Custom:
+			A low and high threshold percentage is specified.
 			Charging begins when level drops below
 			charge_control_start_threshold, and ceases when
 			level is above charge_control_end_threshold.
-		Long Life: Customized charge rate for last longer battery life.
+		Long Life:
+			Customized charge rate for last longer battery life.
 			On Wilco device this mode is pre-configured in the factory
 			through EC's private PID. Swiching to a different mode will
 			be denied by Wilco EC when Long Life mode is enabled.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rapidio linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rapidio
index 8716beeb16c1..19aefb21b639 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rapidio
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rapidio
@@ -6,6 +6,7 @@ Description:
 		The /sys/class/rapidio_port subdirectory contains individual
 		subdirectories named as "rapidioN" where N = mport ID registered
 		with RapidIO subsystem.
+
 		NOTE: An mport ID is not a RapidIO destination ID assigned to a
 		given local mport device.
 
@@ -16,7 +17,9 @@ Contact:	Matt Porter <mporter@kernel.crashing.org>,
 		Alexandre Bounine <alexandre.bounine@idt.com>
 Description:
 		(RO) reports RapidIO common transport system size:
+
 		0 = small (8-bit destination ID, max. 256 devices),
+
 		1 = large (16-bit destination ID, max. 65536 devices).
 
 What:		/sys/class/rapidio_port/rapidioN/port_destid
@@ -25,31 +28,32 @@ KernelVersion:	v3.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
 		Alexandre Bounine <alexandre.bounine@idt.com>
 Description:
-		(RO) reports RapidIO destination ID assigned to the given
-		RapidIO mport device. If value 0xFFFFFFFF is returned this means
-		that no valid destination ID have been assigned to the mport
-		(yet). Normally, before enumeration/discovery have been executed
-		only fabric enumerating mports have a valid destination ID
-		assigned to them using "hdid=..." rapidio module parameter.
+
+(RO) reports RapidIO destination ID assigned to the given
+RapidIO mport device. If value 0xFFFFFFFF is returned this means
+that no valid destination ID have been assigned to the mport
+(yet). Normally, before enumeration/discovery have been executed
+only fabric enumerating mports have a valid destination ID
+assigned to them using "hdid=..." rapidio module parameter.
 
 After enumeration or discovery was performed for a given mport device,
 the corresponding subdirectory will also contain subdirectories for each
 child RapidIO device connected to the mport.
 
 The example below shows mport device subdirectory with several child RapidIO
-devices attached to it.
-
-[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
-total 0
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0001
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0004
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0007
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0002
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0003
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0005
-lrwxrwxrwx 1 root root    0 Feb 11 15:11 device -> ../../../0000:01:00.0
--r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
-drwxr-xr-x 2 root root    0 Feb 11 15:11 power
-lrwxrwxrwx 1 root root    0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port
--r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
--rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent
+devices attached to it::
+
+    [rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
+    total 0
+    drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0001
+    drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0004
+    drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0007
+    drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0002
+    drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0003
+    drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0005
+    lrwxrwxrwx 1 root root    0 Feb 11 15:11 device -> ../../../0000:01:00.0
+    -r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
+    drwxr-xr-x 2 root root    0 Feb 11 15:11 power
+    lrwxrwxrwx 1 root root    0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port
+    -r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
+    -rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rc
index 6c0d6c8cb911..9c8ff7910858 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rc
@@ -21,15 +21,22 @@ KernelVersion:	2.6.36
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
 Description:
 		Reading this file returns a list of available protocols,
-		something like:
+		something like::
+
 		    "rc5 [rc6] nec jvc [sony]"
+
 		Enabled protocols are shown in [] brackets.
+
 		Writing "+proto" will add a protocol to the list of enabled
 		protocols.
+
 		Writing "-proto" will remove a protocol from the list of enabled
 		protocols.
+
 		Writing "proto" will enable only "proto".
+
 		Writing "none" will disable all protocols.
+
 		Write fails with EINVAL if an invalid protocol combination or
 		unknown protocol name is used.
 
@@ -39,11 +46,13 @@ KernelVersion:	3.15
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
 Description:
 		Sets the scancode filter expected value.
+
 		Use in combination with /sys/class/rc/rcN/filter_mask to set the
 		expected value of the bits set in the filter mask.
 		If the hardware supports it then scancodes which do not match
 		the filter will be ignored. Otherwise the write will fail with
 		an error.
+
 		This value may be reset to 0 if the current protocol is altered.
 
 What:		/sys/class/rc/rcN/filter_mask
@@ -56,9 +65,11 @@ Description:
 		of the scancode which should be compared against the expected
 		value. A value of 0 disables the filter to allow all valid
 		scancodes to be processed.
+
 		If the hardware supports it then scancodes which do not match
 		the filter will be ignored. Otherwise the write will fail with
 		an error.
+
 		This value may be reset to 0 if the current protocol is altered.
 
 What:		/sys/class/rc/rcN/wakeup_protocols
@@ -67,15 +78,22 @@ KernelVersion:	4.11
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
 Description:
 		Reading this file returns a list of available protocols to use
-		for the wakeup filter, something like:
+		for the wakeup filter, something like::
+
 		    "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
+
 		Note that protocol variants are listed, so "nec", "sony",
 		"rc-5", "rc-6" have their different bit length encodings
 		listed if available.
+
 		The enabled wakeup protocol is shown in [] brackets.
+
 		Only one protocol can be selected at a time.
+
 		Writing "proto" will use "proto" for wakeup events.
+
 		Writing "none" will disable wakeup.
+
 		Write fails with EINVAL if an invalid protocol combination or
 		unknown protocol name is used, or if wakeup is not supported by
 		the hardware.
@@ -86,13 +104,17 @@ KernelVersion:	3.15
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
 Description:
 		Sets the scancode wakeup filter expected value.
+
 		Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to
 		set the expected value of the bits set in the wakeup filter mask
 		to trigger a system wake event.
+
 		If the hardware supports it and wakeup_filter_mask is not 0 then
 		scancodes which match the filter will wake the system from e.g.
 		suspend to RAM or power off.
+
 		Otherwise the write will fail with an error.
+
 		This value may be reset to 0 if the wakeup protocol is altered.
 
 What:		/sys/class/rc/rcN/wakeup_filter_mask
@@ -101,11 +123,15 @@ KernelVersion:	3.15
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
 Description:
 		Sets the scancode wakeup filter mask of bits to compare.
+
 		Use in combination with /sys/class/rc/rcN/wakeup_filter to set
 		the bits of the scancode which should be compared against the
 		expected value to trigger a system wake event.
+
 		If the hardware supports it and wakeup_filter_mask is not 0 then
 		scancodes which match the filter will wake the system from e.g.
 		suspend to RAM or power off.
+
 		Otherwise the write will fail with an error.
+
 		This value may be reset to 0 if the wakeup protocol is altered.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-regulator linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-regulator
index bc578bc60628..8516f08806dd 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-regulator
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-regulator
@@ -35,13 +35,13 @@ Description:
 
 		This will be one of the following strings:
 
-			off
-			on
-			error
-			fast
-			normal
-			idle
-			standby
+			- off
+			- on
+			- error
+			- fast
+			- normal
+			- idle
+			- standby
 
 		"off" means the regulator is not supplying power to the
 		system.
@@ -74,9 +74,9 @@ Description:
 
 		This will be one of the following strings:
 
-		'voltage'
-		'current'
-		'unknown'
+		- 'voltage'
+		- 'current'
+		- 'unknown'
 
 		'voltage' means the regulator output voltage can be controlled
 		by software.
@@ -129,11 +129,11 @@ Description:
 
 		The opmode value can be one of the following strings:
 
-		'fast'
-		'normal'
-		'idle'
-		'standby'
-		'unknown'
+		- 'fast'
+		- 'normal'
+		- 'idle'
+		- 'standby'
+		- 'unknown'
 
 		The modes are described in include/linux/regulator/consumer.h
 
@@ -360,9 +360,9 @@ Description:
 
 		This will be one of the following strings:
 
-		'enabled'
-		'disabled'
-		'unknown'
+		- 'enabled'
+		- 'disabled'
+		- 'unknown'
 
 		'enabled' means the regulator is in bypass mode.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-remoteproc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-remoteproc
index 36094fbeb974..0c9ee55098b8 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-remoteproc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -16,11 +16,11 @@ Description:	Remote processor state
 
 		Reports the state of the remote processor, which will be one of:
 
-		"offline"
-		"suspended"
-		"running"
-		"crashed"
-		"invalid"
+		- "offline"
+		- "suspended"
+		- "running"
+		- "crashed"
+		- "invalid"
 
 		"offline" means the remote processor is powered off.
 
@@ -38,8 +38,8 @@ Description:	Remote processor state
 		Writing this file controls the state of the remote processor.
 		The following states can be written:
 
-		"start"
-		"stop"
+		- "start"
+		- "stop"
 
 		Writing "start" will attempt to start the processor running the
 		firmware indicated by, or written to,
@@ -58,3 +58,47 @@ Description:	Remote processor name
 		Reports the name of the remote processor. This can be used by
 		userspace in exactly identifying a remote processor and ease
 		up the usage in modifying the 'firmware' or 'state' files.
+
+What:		/sys/class/remoteproc/.../coredump
+Date:		July 2020
+Contact:	Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com>
+Description:	Remote processor coredump configuration
+
+		Reports the coredump configuration of the remote processor,
+		which will be one of:
+
+		"disabled"
+		"enabled"
+		"inline"
+
+		"disabled" means no dump will be collected.
+
+		"enabled" means when the remote processor's coredump is
+		collected it will be copied to a separate buffer and that
+		buffer is exposed to userspace.
+
+		"inline" means when the remote processor's coredump is
+		collected userspace will directly read from the remote
+		processor's device memory. Extra buffer will not be used to
+		copy the dump. Also recovery process will not proceed until
+		all data is read by usersapce.
+
+What:		/sys/class/remoteproc/.../recovery
+Date:		July 2020
+Contact:	Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com>
+Description:	Remote processor recovery mechanism
+
+		Reports the recovery mechanism of the remote processor,
+		which will be one of:
+
+		"enabled"
+		"disabled"
+
+		"enabled" means, the remote processor will be automatically
+		recovered whenever it crashes. Moreover, if the remote
+		processor crashes while recovery is disabled, it will
+		be automatically recovered too as soon as recovery is enabled.
+
+		"disabled" means, a remote processor will remain in a crashed
+		state if it crashes. This is useful for debugging purposes;
+		without it, debugging a crash is substantially harder.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rnbd-client linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rnbd-client
index c084f203b41e..00c0286733d4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rnbd-client
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rnbd-client
@@ -5,62 +5,70 @@ Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud
 Description:	Provide information about RNBD-client.
 		All sysfs files that are not read-only provide the usage information on read:
 
-		Example:
-		# cat /sys/class/rnbd-client/ctl/map_device
+		Example::
 
-		> Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr>
-		> [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
-		> [access_mode=<ro|rw|migration>] > map_device
-		>
-		> addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
+		    # cat /sys/class/rnbd-client/ctl/map_device
+
+		    > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr>
+		    > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
+		    > [access_mode=<ro|rw|migration>] > map_device
+		    >
+		    > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
 
 What:		/sys/class/rnbd-client/ctl/map_device
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	Expected format is the following:
+Description:	Expected format is the following::
 
-		sessname=<name of the rtrs session>
-		path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
-		device_path=<full path on remote side>
-		[access_mode=<ro|rw|migration>]
+		    sessname=<name of the rtrs session>
+		    path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
+		    device_path=<full path on remote side>
+		    [access_mode=<ro|rw|migration>]
 
 		Where:
 
-		sessname: accepts a string not bigger than 256 chars, which identifies
-		a given session on the client and on the server.
-		I.e. "clt_hostname-srv_hostname" could be a natural choice.
+		sessname:
+		    accepts a string not bigger than 256 chars, which identifies
+		    a given session on the client and on the server.
+		    I.e. "clt_hostname-srv_hostname" could be a natural choice.
+
+		path:
+		    describes a connection between the client and the server by
+		    specifying destination and, when required, the source address.
+		    The addresses are to be provided in the following format::
 
-		path:     describes a connection between the client and the server by
-		specifying destination and, when required, the source address.
-		The addresses are to be provided in the following format:
+			ip:<IPv6>
+			ip:<IPv4>
+			gid:<GID>
 
-		ip:<IPv6>
-		ip:<IPv4>
-		gid:<GID>
+		for example::
 
-		for example:
+		    path=ip:10.0.0.66
 
-		path=ip:10.0.0.66
 		The single addr is treated as the destination.
 		The connection will be established to this server from any client IP address.
 
-		path=ip:10.0.0.66,ip:10.0.1.66
+		::
+
+		    path=ip:10.0.0.66,ip:10.0.1.66
+
 		First addr is the source address and the second is the destination.
 
 		If multiple "path=" options are specified multiple connection
 		will be established and data will be sent according to
 		the selected multipath policy (see RTRS mp_policy sysfs entry description).
 
-		device_path: Path to the block device on the server side. Path is specified
-		relative to the directory on server side configured in the
-		'dev_search_path' module parameter of the rnbd_server.
-		The rnbd_server prepends the <device_path> received from client
-		with <dev_search_path> and tries to open the
-		<dev_search_path>/<device_path> block device.  On success,
-		a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/
-		directory and an entry in /sys/class/rnbd-client/ctl/devices
-		will be created.
+		device_path:
+		    Path to the block device on the server side. Path is specified
+		    relative to the directory on server side configured in the
+		    'dev_search_path' module parameter of the rnbd_server.
+		    The rnbd_server prepends the <device_path> received from client
+		    with <dev_search_path> and tries to open the
+		    <dev_search_path>/<device_path> block device.  On success,
+		    a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/
+		    directory and an entry in /sys/class/rnbd-client/ctl/devices
+		    will be created.
 
 		If 'dev_search_path' contains '%SESSNAME%', then each session can
 		have different devices namespace, e.g. server was configured with
@@ -68,11 +76,12 @@ Description:	Expected format is the following:
 		client has this string "sessname=blya device_path=sda", then server
 		will try to open: /run/rnbd-devs/blya/sda.
 
-		access_mode: the access_mode parameter specifies if the device is to be
-		mapped as "ro" read-only or "rw" read-write. The server allows
-		a device to be exported in rw mode only once. The "migration"
-		access mode has to be specified if a second mapping in read-write
-		mode is desired.
+		access_mode:
+		    the access_mode parameter specifies if the device is to be
+		    mapped as "ro" read-only or "rw" read-write. The server allows
+		    a device to be exported in rw mode only once. The "migration"
+		    access mode has to be specified if a second mapping in read-write
+		    mode is desired.
 
 		By default "rw" is used.
 
@@ -91,7 +100,7 @@ Description:	Expected format is the following:
 		is the same as the device name.  By extracting the last part of the
 		path the path to the device /dev/<dev-name> can be build.
 
-		o /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev)
+		* /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev)
 
 		How to find the <device_id> of the device is described on the next
 		section.
@@ -106,6 +115,6 @@ Description:	For each device mapped on the client a new symbolic link is created
 		The <device_id> of each device is created as follows:
 
 		- If the 'device_path' provided during mapping contains slashes ("/"),
-		they are replaced by exclamation mark ("!") and used as as the
-		<device_id>. Otherwise, the <device_id> will be the same as the
-		"device_path" provided.
+		  they are replaced by exclamation mark ("!") and used as as the
+		  <device_id>. Otherwise, the <device_id> will be the same as the
+		  "device_path" provided.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
index ec950c93e5c6..ee8ed6494a01 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
@@ -7,6 +7,7 @@ Description:    Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
                 calibrate the AB8500.s 32KHz Real Time Clock.
                 Every 60 seconds the AB8500 will correct the RTC's value
                 by adding to it the value of this attribute.
+
                 The range of the attribute is -127 to +127 in units of
                 30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
 Users:          The /vendor/st-ericsson/base_utilities/core/rtc_calibration
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rtrs-client linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rtrs-client
index e7e718db8941..0f7165aab251 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-rtrs-client
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-rtrs-client
@@ -10,10 +10,10 @@ Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
 Description:	RW, adds a new path (connection) to an existing session. Expected format is the
-		following:
+		following::
 
-		<[source addr,]destination addr>
-		*addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ]
+		    <[source addr,]destination addr>
+		    *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ]
 
 What:		/sys/class/rtrs-client/<session-name>/max_reconnect_attempts
 Date:		Feb 2020
@@ -29,10 +29,10 @@ Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud
 Description:	Multipath policy specifies which path should be selected on each IO:
 
 		round-robin (0):
-		select path in per CPU round-robin manner.
+		    select path in per CPU round-robin manner.
 
 		min-inflight (1):
-		select path with minimum inflights.
+		    select path with minimum inflights.
 
 What:		/sys/class/rtrs-client/<session-name>/paths/
 Date:		Feb 2020
@@ -109,8 +109,11 @@ Description:	RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's
 		not the case, the processing of an I/O response could be processed on a
 		different CPU than where it was originally submitted.  This file shows
 		how many interrupts where generated on a non expected CPU.
-		"from:" is the CPU on which the IRQ was expected, but not generated.
-		"to:" is the CPU on which the IRQ was generated, but not expected.
+
+		"from:"
+		    is the CPU on which the IRQ was expected, but not generated.
+		"to:"
+		    is the CPU on which the IRQ was generated, but not expected.
 
 What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reconnects
 Date:		Feb 2020
@@ -125,7 +128,7 @@ Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
 Description:	Contains statistics regarding rdma operations and inflight operations.
-		The output consists of 6 values:
+		The output consists of 6 values::
 
-		<read-count> <read-total-size> <write-count> <write-total-size> \
-		<inflights> <failovered>
+		    <read-count> <read-total-size> <write-count> \
+		    <write-total-size> <inflights> <failovered>
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-scsi_host linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-scsi_host
index bafc59fd7b69..7c98d8f43c45 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-scsi_host
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-scsi_host
@@ -56,8 +56,9 @@ Description:
 		management) on top, which makes it match the Windows IRST (Intel
 		Rapid Storage Technology) driver settings. This setting is also
 		close to min_power, except that:
+
 		a) It does not use host-initiated slumber mode, but it does
-		allow device-initiated slumber
+		   allow device-initiated slumber
 		b) It does not enable low power device sleep mode (DevSlp).
 
 What:		/sys/class/scsi_host/hostX/em_message
@@ -70,8 +71,8 @@ Description:
 		protocol, writes and reads correspond to the LED message format
 		as defined in the AHCI spec.
 
-		The user must turn sw_activity (under /sys/block/*/device/) OFF
-		it they wish to control the activity LED via the em_message
+		The user must turn sw_activity (under `/sys/block/*/device/`)
+		OFF it they wish to control the activity LED via the em_message
 		file.
 
 		em_message_type: (RO) Displays the current enclosure management
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-typec linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-typec
index b834671522d6..b7794e02ad20 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-typec
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-typec
@@ -40,10 +40,13 @@ Description:
 		attribute will not return until the operation has finished.
 
 		Valid values:
-		- source (The port will behave as source only DFP port)
-		- sink (The port will behave as sink only UFP port)
-		- dual (The port will behave as dual-role-data and
+
+		======  ==============================================
+		source  (The port will behave as source only DFP port)
+		sink    (The port will behave as sink only UFP port)
+		dual    (The port will behave as dual-role-data and
 			dual-role-power port)
+		======  ==============================================
 
 What:		/sys/class/typec/<port>/vconn_source
 Date:		April 2017
@@ -59,6 +62,7 @@ Description:
 		generates uevent KOBJ_CHANGE.
 
 		Valid values:
+
 		- "no" when the port is not the VCONN Source
 		- "yes" when the port is the VCONN Source
 
@@ -72,6 +76,7 @@ Description:
 		power operation mode should show "usb_power_delivery".
 
 		Valid values:
+
 		- default
 		- 1.5A
 		- 3.0A
@@ -191,6 +196,7 @@ Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
 		Shows type of the plug on the cable:
+
 		- type-a - Standard A
 		- type-b - Standard B
 		- type-c
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-uwb_rc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-uwb_rc
index a0578751c1e3..6c5dcad21e19 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-uwb_rc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-uwb_rc
@@ -66,11 +66,14 @@ Description:
                 <channel> <type> [<bpst offset>]
 
                 to start (or stop) scanning on a channel.  <type> is one of:
-                    0 - scan
-                    1 - scan outside BP
-                    2 - scan while inactive
-                    3 - scanning disabled
-                    4 - scan (with start time of <bpst offset>)
+
+		   ==   =======================================
+                    0   scan
+                    1   scan outside BP
+                    2   scan while inactive
+                    3   scanning disabled
+                    4   scan (with start time of <bpst offset>)
+		   ==   =======================================
 
 What:           /sys/class/uwb_rc/uwbN/mac_address
 Date:           July 2008
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-watchdog linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-watchdog
index 9860a8b2ba75..585caecda3a5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-class-watchdog
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-class-watchdog
@@ -91,10 +91,13 @@ Description:
 		h/w strapping (for WDT2 only).
 
 		At alternate flash the 'access_cs0' sysfs node provides:
-			ast2400: a way to get access to the primary SPI flash
+
+			ast2400:
+				a way to get access to the primary SPI flash
 				chip at CS0 after booting from the alternate
 				chip at CS1.
-			ast2500: a way to restore the normal address mapping
+			ast2500:
+				a way to restore the normal address mapping
 				from (CS0->CS1, CS1->CS0) to (CS0->CS0,
 				CS1->CS1).
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-dev linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-dev
index a9f2b8b0530f..d1739063e762 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-dev
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-dev
@@ -9,9 +9,10 @@ Description:	The /sys/dev tree provides a method to look up the sysfs
 		the form "<major>:<minor>".  These links point to the
 		corresponding sysfs path for the given device.
 
-		Example:
-		$ readlink /sys/dev/block/8:32
-		../../block/sdc
+		Example::
+
+		  $ readlink /sys/dev/block/8:32
+		  ../../block/sdc
 
 		Entries in /sys/dev/char and /sys/dev/block will be
 		dynamically created and destroyed as devices enter and
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-mapping linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-mapping
index 490ccfd67f12..8d202bac9394 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-mapping
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-mapping
@@ -8,26 +8,27 @@ Description:
                 block.
                 For example, on 4-die Xeon platform with up to 6 IIO stacks per
                 die and, therefore, 6 IIO PMON blocks per die, the mapping of
-                IIO PMON block 0 exposes as the following:
+                IIO PMON block 0 exposes as the following::
 
-                $ ls /sys/devices/uncore_iio_0/die*
-                -r--r--r-- /sys/devices/uncore_iio_0/die0
-                -r--r--r-- /sys/devices/uncore_iio_0/die1
-                -r--r--r-- /sys/devices/uncore_iio_0/die2
-                -r--r--r-- /sys/devices/uncore_iio_0/die3
+		    $ ls /sys/devices/uncore_iio_0/die*
+		    -r--r--r-- /sys/devices/uncore_iio_0/die0
+		    -r--r--r-- /sys/devices/uncore_iio_0/die1
+		    -r--r--r-- /sys/devices/uncore_iio_0/die2
+		    -r--r--r-- /sys/devices/uncore_iio_0/die3
 
-                $ tail /sys/devices/uncore_iio_0/die*
-                ==> /sys/devices/uncore_iio_0/die0 <==
-                0000:00
-                ==> /sys/devices/uncore_iio_0/die1 <==
-                0000:40
-                ==> /sys/devices/uncore_iio_0/die2 <==
-                0000:80
-                ==> /sys/devices/uncore_iio_0/die3 <==
-                0000:c0
+		    $ tail /sys/devices/uncore_iio_0/die*
+		    ==> /sys/devices/uncore_iio_0/die0 <==
+		    0000:00
+		    ==> /sys/devices/uncore_iio_0/die1 <==
+		    0000:40
+		    ==> /sys/devices/uncore_iio_0/die2 <==
+		    0000:80
+		    ==> /sys/devices/uncore_iio_0/die3 <==
+		    0000:c0
 
-                Which means:
-                IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000
-                IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000
-                IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000
-                IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000
+                Which means::
+
+		    IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000
+		    IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000
+		    IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000
+		    IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-memory linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-memory
index deef3b5723cf..2da2b1fba2c1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-memory
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-memory
@@ -47,16 +47,19 @@ Description:
 		online/offline state of the memory section.  When written,
 		root can toggle the the online/offline state of a removable
 		memory section (see removable file description above)
-		using the following commands.
-		# echo online > /sys/devices/system/memory/memoryX/state
-		# echo offline > /sys/devices/system/memory/memoryX/state
+		using the following commands::
+
+		  # echo online > /sys/devices/system/memory/memoryX/state
+		  # echo offline > /sys/devices/system/memory/memoryX/state
 
 		For example, if /sys/devices/system/memory/memory22/removable
 		contains a value of 1 and
 		/sys/devices/system/memory/memory22/state contains the
 		string "online" the following command can be executed by
-		by root to offline that section.
-		# echo offline > /sys/devices/system/memory/memory22/state
+		by root to offline that section::
+
+		  # echo offline > /sys/devices/system/memory/memory22/state
+
 Users:		hotplug memory remove tools
 		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
@@ -78,6 +81,7 @@ Description:
 
 		For example, the following symbolic link is created for
 		memory section 9 on node0:
+
 		/sys/devices/system/memory/memory9/node0 -> ../../node/node0
 
 
@@ -90,4 +94,5 @@ Description:
 		points to the corresponding /sys/devices/system/memory/memoryY
 		memory section directory.  For example, the following symbolic
 		link is created for memory section 9 on node0.
+
 		/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
index 7e43cdce9a52..f7b360a61b21 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
@@ -7,6 +7,7 @@ Description:
 		(RO) Hexadecimal bitmask of the TAD attributes are reported by
 		the platform firmware (see ACPI 6.2, section 9.18.2):
 
+		======= ======================================================
 		BIT(0): AC wakeup implemented if set
 		BIT(1): DC wakeup implemented if set
 		BIT(2): Get/set real time features implemented if set
@@ -16,6 +17,7 @@ Description:
 		BIT(6): The AC timer wakes up from S5 if set
 		BIT(7): The DC timer wakes up from S4 if set
 		BIT(8): The DC timer wakes up from S5 if set
+		======= ======================================================
 
 		The other bits are reserved.
 
@@ -62,9 +64,11 @@ Description:
 		timer status with the following meaning of bits (see ACPI 6.2,
 		Section 9.18.5):
 
+		======= ======================================================
 		Bit(0): The timer has expired if set.
 		Bit(1): The timer has woken up the system from a sleep state
 		        (S3 or S4/S5 if supported) if set.
+		======= ======================================================
 
 		The other bits are reserved.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
index d548eaac230a..40f29a01fd14 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -3,8 +3,9 @@ Date:		April 2010
 Contact:	Fabien Chouteau <fabien.chouteau@barco.com>
 Description:
 		Show the suspend state of an USB composite gadget.
-		1 -> suspended
-		0 -> resumed
+
+		- 1 -> suspended
+		- 0 -> resumed
 
 		(_UDC_ is the name of the USB Device Controller driver)
 
@@ -17,5 +18,6 @@ Description:
 		Storage mode.
 
 		Possible values are:
-			1 -> ignore the FUA flag
-			0 -> obey the FUA flag
+
+			- 1 -> ignore the FUA flag
+			- 0 -> obey the FUA flag
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-docg3 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-docg3
index 8aa36716882f..378c42694bfb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-docg3
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-docg3
@@ -9,8 +9,10 @@ Description:
 		The protection has information embedded whether it blocks reads,
 		writes or both.
 		The result is:
-		0 -> the DPS is not keylocked
-		1 -> the DPS is keylocked
+
+		- 0 -> the DPS is not keylocked
+		- 1 -> the DPS is keylocked
+
 Users:		None identified so far.
 
 What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
@@ -27,8 +29,12 @@ Description:
 		Entering the correct value toggle the lock, and can be observed
 		through f[0-3]_dps[01]_is_keylocked.
 		Possible values are:
+
 			- 8 bytes
+
 		Typical values are:
+
 			- "00000000"
 			- "12345678"
+
 Users:		None identified so far.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-ipmi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-ipmi
index afb5db856e1c..07df0ddc0b69 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-ipmi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-ipmi
@@ -123,38 +123,40 @@ KernelVersion:	v4.15
 Contact:	openipmi-developer@lists.sourceforge.net
 Description:
 
-		idles:			(RO) Number of times the interface was
+		======================	========================================
+		idles			(RO) Number of times the interface was
 					idle while being polled.
 
-		watchdog_pretimeouts:	(RO) Number of watchdog pretimeouts.
+		watchdog_pretimeouts	(RO) Number of watchdog pretimeouts.
 
-		complete_transactions:	(RO) Number of completed messages.
+		complete_transactions	(RO) Number of completed messages.
 
-		events:			(RO) Number of IPMI events received from
+		events			(RO) Number of IPMI events received from
 					the hardware.
 
-		interrupts:		(RO) Number of interrupts the driver
+		interrupts		(RO) Number of interrupts the driver
 					handled.
 
-		hosed_count:		(RO) Number of times the hardware didn't
+		hosed_count		(RO) Number of times the hardware didn't
 					follow the state machine.
 
-		long_timeouts:		(RO) Number of times the driver
+		long_timeouts		(RO) Number of times the driver
 					requested a timer while nothing was in
 					progress.
 
-		flag_fetches:		(RO) Number of times the driver
+		flag_fetches		(RO) Number of times the driver
 					requested flags from the hardware.
 
-		attentions:		(RO) Number of time the driver got an
+		attentions		(RO) Number of time the driver got an
 					ATTN from the hardware.
 
-		incoming_messages:	(RO) Number of asynchronous messages
+		incoming_messages	(RO) Number of asynchronous messages
 					received.
 
-		short_timeouts:		(RO) Number of times the driver
+		short_timeouts		(RO) Number of times the driver
 					requested a timer while an operation was
 					in progress.
+		======================	========================================
 
 
 What:		/sys/devices/platform/ipmi_si.*/interrupts_enabled
@@ -201,38 +203,40 @@ Date:		Sep, 2017
 KernelVersion:	v4.15
 Contact:	openipmi-developer@lists.sourceforge.net
 Description:
-		hosed:			(RO) Number of times the hardware didn't
+		======================	========================================
+		hosed			(RO) Number of times the hardware didn't
 					follow the state machine.
 
-		alerts:			(RO) Number of alerts received.
+		alerts			(RO) Number of alerts received.
 
-		sent_messages:		(RO) Number of total messages sent.
+		sent_messages		(RO) Number of total messages sent.
 
-		sent_message_parts:	(RO) Number of message parts sent.
+		sent_message_parts	(RO) Number of message parts sent.
 					Messages may be broken into parts if
 					they are long.
 
-		received_messages:	(RO) Number of message responses
+		received_messages	(RO) Number of message responses
 					received.
 
-		received_message_parts: (RO) Number of message fragments
+		received_message_parts	(RO) Number of message fragments
 					received.
 
-		events:			(RO) Number of received events.
+		events			(RO) Number of received events.
 
-		watchdog_pretimeouts:	(RO) Number of watchdog pretimeouts.
+		watchdog_pretimeouts	(RO) Number of watchdog pretimeouts.
 
-		flag_fetches:		(RO) Number of times a flag fetch was
+		flag_fetches		(RO) Number of times a flag fetch was
 					requested.
 
-		send_retries:		(RO) Number of time a message was
+		send_retries		(RO) Number of time a message was
 					retried.
 
-		receive_retries:	(RO) Number of times the receive of a
+		receive_retries		(RO) Number of times the receive of a
 					message was retried.
 
-		send_errors:		(RO) Number of times the send of a
+		send_errors		(RO) Number of times the send of a
 					message failed.
 
-		receive_errors:		(RO) Number of errors in receiving
+		receive_errors		(RO) Number of errors in receiving
 					messages.
+		======================	========================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
index 2107082426da..e45ac2e865d5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
@@ -17,10 +17,10 @@ Description:
 		to overlay planes.
 
 		Selects the composition mode for the overlay. Possible values
-		are
+		are:
 
-		0 - Alpha Blending
-		1 - ROP3
+		- 0 - Alpha Blending
+		- 1 - ROP3
 
 What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_position
 Date:		May 2012
@@ -30,7 +30,7 @@ Description:
 		to overlay planes.
 
 		Stores the x,y overlay position on the display in pixels. The
-		position format is `[0-9]+,[0-9]+'.
+		position format is `[0-9]+,[0-9]+`.
 
 What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_rop3
 Date:		May 2012
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
index a8daceb4a956..ee253b033280 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
@@ -102,6 +102,8 @@ Description:
 		b[15:0]
 			inform firmware the current software execution
 			stage.
+
+			==	===========================================
 			0	the first stage bootloader didn't run or
 				didn't reach the point of launching second
 				stage bootloader.
@@ -111,21 +113,29 @@ Description:
 			2	both first and second stage bootloader ran
 				and the operating system launch was
 				attempted.
+			==	===========================================
 
 		b[16]
+			==	===========================================
 			1	firmware to reset current image retry
 				counter.
 			0	no action.
+			==	===========================================
 
 		b[17]
+			==	===========================================
 			1	firmware to clear RSU log
 			0	no action.
+			==	===========================================
 
 		b[18]
 			this is negative logic
+
+			==	===========================================
 			1	no action
 			0	firmware record the notify code defined
 				in b[15:0].
+			==	===========================================
 
 What:		/sys/devices/platform/stratix10-rsu.0/dcmf0
 Date:		June 2020
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index b555df825447..1a04ca8162ad 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -151,23 +151,28 @@ Description:
 		The processor idle states which are available for use have the
 		following attributes:
 
-		name: (RO) Name of the idle state (string).
+		======== ==== =================================================
+		name:	 (RO) Name of the idle state (string).
 
 		latency: (RO) The latency to exit out of this idle state (in
-		microseconds).
+			      microseconds).
 
-		power: (RO) The power consumed while in this idle state (in
-		milliwatts).
+		power:   (RO) The power consumed while in this idle state (in
+			      milliwatts).
 
-		time: (RO) The total time spent in this idle state (in microseconds).
+		time:    (RO) The total time spent in this idle state
+			      (in microseconds).
 
-		usage: (RO) Number of times this state was entered (a count).
+		usage:	 (RO) Number of times this state was entered (a count).
 
-		above: (RO) Number of times this state was entered, but the
-		       observed CPU idle duration was too short for it (a count).
+		above:	 (RO) Number of times this state was entered, but the
+			      observed CPU idle duration was too short for it
+			      (a count).
 
-		below: (RO) Number of times this state was entered, but the
-		       observed CPU idle duration was too long for it (a count).
+		below:	 (RO) Number of times this state was entered, but the
+			      observed CPU idle duration was too long for it
+			      (a count).
+		======== ==== =================================================
 
 What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/desc
 Date:		February 2008
@@ -290,6 +295,7 @@ Description:	Processor frequency boosting control
 		This switch controls the boost setting for the whole system.
 		Boosting allows the CPU and the firmware to run at a frequency
 		beyound it's nominal limit.
+
 		More details can be found in
 		Documentation/admin-guide/pm/cpufreq.rst
 
@@ -337,43 +343,57 @@ Contact:	Sudeep Holla <sudeep.holla@arm.com>
 Description:	Parameters for the CPU cache attributes
 
 		allocation_policy:
-			- WriteAllocate: allocate a memory location to a cache line
-					 on a cache miss because of a write
-			- ReadAllocate: allocate a memory location to a cache line
+			- WriteAllocate:
+					allocate a memory location to a cache line
+					on a cache miss because of a write
+			- ReadAllocate:
+					allocate a memory location to a cache line
 					on a cache miss because of a read
-			- ReadWriteAllocate: both writeallocate and readallocate
+			- ReadWriteAllocate:
+					both writeallocate and readallocate
 
-		attributes: LEGACY used only on IA64 and is same as write_policy
+		attributes:
+			    LEGACY used only on IA64 and is same as write_policy
 
-		coherency_line_size: the minimum amount of data in bytes that gets
+		coherency_line_size:
+				     the minimum amount of data in bytes that gets
 				     transferred from memory to cache
 
-		level: the cache hierarchy in the multi-level cache configuration
+		level:
+			the cache hierarchy in the multi-level cache configuration
 
-		number_of_sets: total number of sets in the cache, a set is a
+		number_of_sets:
+				total number of sets in the cache, a set is a
 				collection of cache lines with the same cache index
 
-		physical_line_partition: number of physical cache line per cache tag
+		physical_line_partition:
+				number of physical cache line per cache tag
 
-		shared_cpu_list: the list of logical cpus sharing the cache
+		shared_cpu_list:
+				the list of logical cpus sharing the cache
 
-		shared_cpu_map: logical cpu mask containing the list of cpus sharing
+		shared_cpu_map:
+				logical cpu mask containing the list of cpus sharing
 				the cache
 
-		size: the total cache size in kB
+		size:
+			the total cache size in kB
 
 		type:
 			- Instruction: cache that only holds instructions
 			- Data: cache that only caches data
 			- Unified: cache that holds both data and instructions
 
-		ways_of_associativity: degree of freedom in placing a particular block
-					of memory in the cache
+		ways_of_associativity:
+			degree of freedom in placing a particular block
+			of memory in the cache
 
 		write_policy:
-			- WriteThrough: data is written to both the cache line
+			- WriteThrough:
+					data is written to both the cache line
 					and to the block in the lower-level memory
-			- WriteBack: data is written only to the cache line and
+			- WriteBack:
+				     data is written only to the cache line and
 				     the modified cache line is written to main
 				     memory only when it is replaced
 
@@ -414,30 +434,30 @@ Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
 		throttle attributes exported in the 'throttle_stats' directory:
 
 		- turbo_stat : This file gives the total number of times the max
-		frequency is throttled to lower frequency in turbo (at and above
-		nominal frequency) range of frequencies.
+		  frequency is throttled to lower frequency in turbo (at and above
+		  nominal frequency) range of frequencies.
 
 		- sub_turbo_stat : This file gives the total number of times the
-		max frequency is throttled to lower frequency in sub-turbo(below
-		nominal frequency) range of frequencies.
+		  max frequency is throttled to lower frequency in sub-turbo(below
+		  nominal frequency) range of frequencies.
 
 		- unthrottle : This file gives the total number of times the max
-		frequency is unthrottled after being throttled.
+		  frequency is unthrottled after being throttled.
 
 		- powercap : This file gives the total number of times the max
-		frequency is throttled due to 'Power Capping'.
+		  frequency is throttled due to 'Power Capping'.
 
 		- overtemp : This file gives the total number of times the max
-		frequency is throttled due to 'CPU Over Temperature'.
+		  frequency is throttled due to 'CPU Over Temperature'.
 
 		- supply_fault : This file gives the total number of times the
-		max frequency is throttled due to 'Power Supply Failure'.
+		  max frequency is throttled due to 'Power Supply Failure'.
 
 		- overcurrent : This file gives the total number of times the
-		max frequency is throttled due to 'Overcurrent'.
+		  max frequency is throttled due to 'Overcurrent'.
 
 		- occ_reset : This file gives the total number of times the max
-		frequency is throttled due to 'OCC Reset'.
+		  frequency is throttled due to 'OCC Reset'.
 
 		The sysfs attributes representing different throttle reasons like
 		powercap, overtemp, supply_fault, overcurrent and occ_reset map to
@@ -469,8 +489,9 @@ What:		/sys/devices/system/cpu/cpuX/regs/
 Date:		June 2016
 Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
 Description:	AArch64 CPU registers
+
 		'identification' directory exposes the CPU ID registers for
-		 identifying model and revision of the CPU.
+		identifying model and revision of the CPU.
 
 What:		/sys/devices/system/cpu/cpu#/cpu_capacity
 Date:		December 2016
@@ -497,9 +518,11 @@ Description:	Information about CPU vulnerabilities
 		vulnerabilities. The output of those files reflects the
 		state of the CPUs in the system. Possible output values:
 
+		================  ==============================================
 		"Not affected"	  CPU is not affected by the vulnerability
 		"Vulnerable"	  CPU is affected and no mitigation in effect
 		"Mitigation: $M"  CPU is affected and mitigation $M is in effect
+		================  ==============================================
 
 		See also: Documentation/admin-guide/hw-vuln/index.rst
 
@@ -515,12 +538,14 @@ Description:	Control Symetric Multi Threading (SMT)
 		control: Read/write interface to control SMT. Possible
 			 values:
 
+			 ================ =========================================
 			 "on"		  SMT is enabled
 			 "off"		  SMT is disabled
 			 "forceoff"	  SMT is force disabled. Cannot be changed.
 			 "notsupported"   SMT is not supported by the CPU
 			 "notimplemented" SMT runtime toggling is not
 					  implemented for the architecture
+			 ================ =========================================
 
 			 If control status is "forceoff" or "notsupported" writes
 			 are rejected.
@@ -576,7 +601,7 @@ Description:	Secure Virtual Machine
 		Facility in POWER9 and newer processors. i.e., it is a Secure
 		Virtual Machine.
 
-What: 		/sys/devices/system/cpu/cpuX/purr
+What:		/sys/devices/system/cpu/cpuX/purr
 Date:		Apr 2005
 Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
 Description:	PURR ticks for this CPU since the system boot.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
index 470def06ab0a..1a8ee26e92ae 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
@@ -5,8 +5,10 @@ Contact:        Vernon Mauery <vernux@us.ibm.com>
 Description:    The state file allows a means by which to change in and
                 out of Premium Real-Time Mode (PRTM), as well as the
                 ability to query the current state.
-                    0 => PRTM off
-                    1 => PRTM enabled
+
+                    - 0 => PRTM off
+                    - 1 => PRTM enabled
+
 Users:          The ibm-prtm userspace daemon uses this interface.
 
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
index 4d63a7904b94..42214b4ff14a 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
@@ -6,11 +6,13 @@ Description:	Read/write the current state of DDR Backup Mode, which controls
 		if DDR power rails will be kept powered during system suspend.
 		("on"/"1" = enabled, "off"/"0" = disabled).
 		Two types of power switches (or control signals) can be used:
+
 		  A. With a momentary power switch (or pulse signal), DDR
 		     Backup Mode is enabled by default when available, as the
 		     PMIC will be configured only during system suspend.
 		  B. With a toggle power switch (or level signal), the
 		     following steps must be followed exactly:
+
 		       1. Configure PMIC for backup mode, to change the role of
 			  the accessory power switch from a power switch to a
 			  wake-up switch,
@@ -20,8 +22,10 @@ Description:	Read/write the current state of DDR Backup Mode, which controls
 		       3. Suspend system,
 		       4. Switch accessory power switch on, to resume the
 			  system.
+
 		     DDR Backup Mode must be explicitly enabled by the user,
 		     to invoke step 1.
+
 		See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
 Users:		User space applications for embedded boards equipped with a
 		BD9571MWV PMIC.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-genwqe linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-genwqe
index 64ac6d567c4b..69d855dc4c47 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-genwqe
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-genwqe
@@ -29,8 +29,12 @@ What:           /sys/class/genwqe/genwqe<n>_card/reload_bitstream
 Date:           May 2014
 Contact:        klebers@linux.vnet.ibm.com
 Description:    Interface to trigger a PCIe card reset to reload the bitstream.
+
+		::
+
                   sudo sh -c 'echo 1 > \
                     /sys/class/genwqe/genwqe0_card/reload_bitstream'
+
                 If successfully, the card will come back with the bitstream set
                 on 'next_bitstream'.
 
@@ -64,8 +68,11 @@ Description:    Base clock frequency of the card.
 What:           /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs
 Date:           Oct 2013
 Contact:        haver@linux.vnet.ibm.com
-Description:    Enable VFs (1..15):
+Description:    Enable VFs (1..15)::
+
                   sudo sh -c 'echo 15 > \
                     /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs'
-                Disable VFs:
+
+                Disable VFs::
+
                   Write a 0 into the same sysfs entry.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs
index 1a14bf9b22ba..169ae4b2a180 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -2,13 +2,17 @@ What:           /sys/class/habanalabs/hl<n>/armcp_kernel_ver
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        oded.gabbay@gmail.com
-Description:    Version of the Linux kernel running on the device's CPU
+Description:    Version of the Linux kernel running on the device's CPU.
+                Will be DEPRECATED in Linux kernel version 5.10, and be
+                replaced with cpucp_kernel_ver
 
 What:           /sys/class/habanalabs/hl<n>/armcp_ver
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        oded.gabbay@gmail.com
 Description:    Version of the application running on the device's CPU
+                Will be DEPRECATED in Linux kernel version 5.10, and be
+                replaced with cpucp_ver
 
 What:           /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
 Date:           Jun 2019
@@ -33,6 +37,18 @@ KernelVersion:  5.1
 Contact:        oded.gabbay@gmail.com
 Description:    Version of the Device's CPLD F/W
 
+What:           /sys/class/habanalabs/hl<n>/cpucp_kernel_ver
+Date:           Oct 2020
+KernelVersion:  5.10
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Linux kernel running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/cpucp_ver
+Date:           Oct 2020
+KernelVersion:  5.10
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the application running on the device's CPU
+
 What:           /sys/class/habanalabs/hl<n>/device_type
 Date:           Jan 2019
 KernelVersion:  5.1
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-lenovo linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-lenovo
index 53a0725962e1..aee85ca1f6be 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-lenovo
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-lenovo
@@ -3,14 +3,18 @@ Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be
 		is being controlled by press_speed.
+
 		Values are 0 or 1.
+
 		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging
 Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled.
+
 		Values are 0 or 1.
+
 		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select
@@ -25,7 +29,9 @@ Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate
 		a left or right mouse button click.
+
 		Values are 0 or 1.
+
 		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity
@@ -39,12 +45,16 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled.
+
 		Values are decimal integers from 1 (slowest) to 255 (fastest).
+
 		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fn_lock
 Date:		July 2014
 Contact:	linux-input@vger.kernel.org
 Description:	This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1)
+
 		Values are 0 or 1
+
 		Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
index 305dffd229a8..de07be314efc 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
@@ -12,7 +12,9 @@ KernelVersion:	4.1
 Contact:	Michal Malý <madcatxster@devoid-pointer.net>
 Description:	Displays a set of alternate modes supported by a wheel. Each
 		mode is listed as follows:
+
 		  Tag: Mode Name
+
 		Currently active mode is marked with an asterisk. List also
 		contains an abstract item "native" which always denotes the
 		native mode of the wheel. Echoing the mode tag switches the
@@ -24,24 +26,30 @@ Description:	Displays a set of alternate modes supported by a wheel. Each
 		This entry is not created for devices that have only one mode.
 
 		Currently supported mode switches:
-		Driving Force Pro:
+
+		Driving Force Pro::
+
 		  DF-EX --> DFP
 
-		G25:
+		G25::
+
 		  DF-EX --> DFP --> G25
 
-		G27:
+		G27::
+
 		  DF-EX <*> DFP <-> G25 <-> G27
 		  DF-EX <*--------> G25 <-> G27
 		  DF-EX <*----------------> G27
 
-		G29:
+		G29::
+
 		  DF-EX <*> DFP <-> G25 <-> G27 <-> G29
 		  DF-EX <*--------> G25 <-> G27 <-> G29
 		  DF-EX <*----------------> G27 <-> G29
 		  DF-EX <*------------------------> G29
 
-		DFGT:
+		DFGT::
+
 		  DF-EX <*> DFP <-> DFGT
 		  DF-EX <*--------> DFGT
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-ntrig linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-ntrig
index e574a5625efe..0e323a5cec6c 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-ntrig
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-ntrig
@@ -29,12 +29,13 @@ Contact:	linux-input@vger.kernel.org
 Description:
 		Threholds to override activation slack.
 
-		activation_width:	(RW) Width threshold to immediately
+		=================	=====================================
+		activation_width	(RW) Width threshold to immediately
 					start processing touch events.
 
-		activation_height:	(RW) Height threshold to immediately
+		activation_height	(RW) Height threshold to immediately
 					start processing touch events.
-
+		=================	=====================================
 
 What:		/sys/bus/hid/drivers/ntrig/<dev>/min_width
 What:		/sys/bus/hid/drivers/ntrig/<dev>/min_height
@@ -44,11 +45,13 @@ Contact:	linux-input@vger.kernel.org
 Description:
 		Minimum size contact accepted.
 
-		min_width:	(RW) Minimum touch contact width to decide
+		==========	===========================================
+		min_width	(RW) Minimum touch contact width to decide
 				activation and activity.
 
-		min_height:	(RW) Minimum touch contact height to decide
+		min_height	(RW) Minimum touch contact height to decide
 				activation and activity.
+		==========	===========================================
 
 
 What:		/sys/bus/hid/drivers/ntrig/<dev>/sensor_physical_width
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index 8f7982c70d72..11cd9bf0ad18 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -3,17 +3,21 @@ Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	It is possible to switch the dpi setting of the mouse with the
 		press of a button.
+
 		When read, this file returns the raw number of the actual dpi
 		setting reported by the mouse. This number has to be further
 		processed to receive the real dpi value:
 
+		===== =====
 		VALUE DPI
+		===== =====
 		1     800
 		2     1200
 		3     1600
 		4     2000
 		5     2400
 		6     3200
+		===== =====
 
 		This file is readonly.
 Users:		http://roccat.sourceforge.net
@@ -22,6 +26,7 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When read, this file returns the number of the actual profile.
+
 		This file is readonly.
 Users:		http://roccat.sourceforge.net
 
@@ -33,6 +38,7 @@ Description:	When read, this file returns the raw integer version number of the
 		further usage in other programs. To receive the real version
 		number the decimal point has to be shifted 2 positions to the
 		left. E.g. a returned value of 138 means 1.38
+
 		This file is readonly.
 Users:		http://roccat.sourceforge.net
 
@@ -43,10 +49,13 @@ Description:	The mouse can store 5 profiles which can be switched by the
                 press of a button. A profile holds information like button
                 mappings, sensitivity, the colors of the 5 leds and light
                 effects.
+
                 When read, these files return the respective profile. The
                 returned data is 975 bytes in size.
+
 		When written, this file lets one write the respective profile
 		data back to the mouse. The data has to be 975 bytes long.
+
 		The mouse will reject invalid data, whereas the profile number
 		stored in the profile doesn't need to fit the number of the
 		store.
@@ -58,6 +67,7 @@ Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When read, this file returns the settings stored in the mouse.
 		The size of the data is 36 bytes and holds information like the
 		startup_profile, tcu state and calibration_data.
+
 		When written, this file lets write settings back to the mouse.
 		The data has to be 36 bytes long. The mouse will reject invalid
 		data.
@@ -67,8 +77,10 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The integer value of this attribute ranges from 1 to 5.
+
                 When read, this attribute returns the number of the profile
                 that's active when the mouse is powered on.
+
 		When written, this file sets the number of the startup profile
 		and the mouse activates this profile immediately.
 Users:		http://roccat.sourceforge.net
@@ -80,9 +92,12 @@ Description:	The mouse has a "Tracking Control Unit" which lets the user
 		calibrate the laser power to fit the mousepad surface.
 		When read, this file returns the current state of the TCU,
 		where 0 means off and 1 means on.
+
 		Writing 0 in this file will switch the TCU off.
+
 		Writing 1 in this file will start the calibration which takes
 		around 6 seconds to complete and activates the TCU.
+
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight
@@ -93,14 +108,18 @@ Description:	The mouse can be equipped with one of four supplied weights
 		and its value can be read out. When read, this file returns the
 		raw value returned by the mouse which eases further processing
 		in other software.
+
 		The values map to the weights as follows:
 
+		===== ======
 		VALUE WEIGHT
+		===== ======
 		0     none
 		1     5g
 		2     10g
 		3     15g
 		4     20g
+		===== ======
 
 		This file is readonly.
 Users:		http://roccat.sourceforge.net
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-wiimote linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-wiimote
index 39dfa5cb1cc5..3bf43d9dcdfe 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-hid-wiimote
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-hid-wiimote
@@ -20,6 +20,7 @@ Description:	This file contains the currently connected and initialized
 		the official Nintendo Nunchuck extension and classic is the
 		Nintendo Classic Controller extension. The motionp extension can
 		be combined with the other two.
+
 		Starting with kernel-version 3.11 Motion Plus hotplugging is
 		supported and if detected, it's no longer reported as static
 		extension. You will get uevent notifications for the motion-plus
@@ -39,9 +40,13 @@ Description:	While a device is initialized by the wiimote driver, we perform
 		Other strings for each device-type are available and may be
 		added if new device-specific detections are added.
 		Currently supported are:
-			gen10: First Wii Remote generation
-			gen20: Second Wii Remote Plus generation (builtin MP)
+
+			============= =======================================
+			gen10:        First Wii Remote generation
+			gen20:        Second Wii Remote Plus generation
+				      (builtin MP)
 			balanceboard: Wii Balance Board
+			============= =======================================
 
 What:		/sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
 Date:		May 2013
@@ -54,6 +59,7 @@ Description:	This attribute is only provided if the device was detected as a
 		First, 0kg values for all 4 sensors are written, followed by the
 		17kg values for all 4 sensors and last the 34kg values for all 4
 		sensors.
+
 		Calibration data is already applied by the kernel to all input
 		values but may be used by user-space to perform other
 		transformations.
@@ -68,9 +74,11 @@ Description:	This attribute is only provided if the device was detected as a
 		is prefixed with a +/-. Each value is a signed 16bit number.
 		Data is encoded as decimal numbers and specifies the offsets of
 		the analog sticks of the pro-controller.
+
 		Calibration data is already applied by the kernel to all input
 		values but may be used by user-space to perform other
 		transformations.
+
 		Calibration data is detected by the kernel during device setup.
 		You can write "scan\n" into this file to re-trigger calibration.
 		You can also write data directly in the form "x1:y1 x2:y2" to
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-input-exc3000 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-input-exc3000
index 3d316d54f81c..cd7c578aef2c 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-input-exc3000
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-input-exc3000
@@ -4,6 +4,7 @@ Contact:	linux-input@vger.kernel.org
 Description:    Reports the firmware version provided by the touchscreen, for example "00_T6" on a EXC80H60
 
 		Access: Read
+
 		Valid values: Represented as string
 
 What:		/sys/bus/i2c/devices/xxx/model
@@ -12,4 +13,5 @@ Contact:	linux-input@vger.kernel.org
 Description:    Reports the model identification provided by the touchscreen, for example "Orion_1320" on a EXC80H60
 
 		Access: Read
+
 		Valid values: Represented as string
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
new file mode 100644
index 000000000000..979a2d62513f
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -0,0 +1,15 @@
+What:		/sys/bus/spi/devices/.../bmc_version
+Date:		June 2020
+KernelVersion:	5.10
+Contact:	Xu Yilun <yilun.xu@intel.com>
+Description:	Read only. Returns the hardware build version of Intel
+		MAX10 BMC chip.
+		Format: "0x%x".
+
+What:		/sys/bus/spi/devices/.../bmcfw_version
+Date:		June 2020
+KernelVersion:	5.10
+Contact:	Xu Yilun <yilun.xu@intel.com>
+Description:	Read only. Returns the firmware version of Intel MAX10
+		BMC chip.
+		Format: "0x%x".
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-jz4780-efuse linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
index bb6f5d6ceea0..4cf595d681e6 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
@@ -4,7 +4,9 @@ Contact:	PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
 Description:	read-only access to the efuse on the Ingenic JZ4780 SoC
 		The SoC has a one time programmable 8K efuse that is
 		split into segments. The driver supports read only.
-		The segments are
+		The segments are:
+
+		===== ======== =================
 		0x000   64 bit Random Number
 		0x008  128 bit Ingenic Chip ID
 		0x018  128 bit Customer ID
@@ -12,5 +14,7 @@ Description:	read-only access to the efuse on the Ingenic JZ4780 SoC
 		0x1E0    8 bit Protect Segment
 		0x1E1 2296 bit HDMI Key
 		0x300 2048 bit Security boot key
+		===== ======== =================
+
 Users:		any user space application which wants to read the Chip
 		and Customer ID
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-pciback linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-pciback
index 73308c2b81b0..49f5fd0c8bbd 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-pciback
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-pciback
@@ -7,8 +7,10 @@ Description:
                 the format of DDDD:BB:DD.F-REG:SIZE:MASK will allow the guest
                 to write and read from the PCI device. That is Domain:Bus:
                 Device.Function-Register:Size:Mask (Domain is optional).
-                For example:
-                #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks
+                For example::
+
+                  #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks
+
                 will allow the guest to read and write to the configuration
                 register 0x0E.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-samsung-laptop linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-samsung-laptop
index 34d3a3359cf4..28c9c040de5d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-samsung-laptop
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-samsung-laptop
@@ -9,10 +9,12 @@ Description:	Some Samsung laptops have different "performance levels"
 		their fans quiet at all costs.  Reading from this file
 		will show the current performance level.  Writing to the
 		file can change this value.
+
 			Valid options:
-				"silent"
-				"normal"
-				"overclock"
+				- "silent"
+				- "normal"
+				- "overclock"
+
 		Note that not all laptops support all of these options.
 		Specifically, not all support the "overclock" option,
 		and it's still unknown if this value even changes
@@ -25,8 +27,9 @@ Contact:	Corentin Chary <corentin.chary@gmail.com>
 Description:	Max battery charge level can be modified, battery cycle
 		life can be extended by reducing the max battery charge
 		level.
-		0 means normal battery mode (100% charge)
-		1 means battery life extender mode (80% charge)
+
+		- 0 means normal battery mode (100% charge)
+		- 1 means battery life extender mode (80% charge)
 
 What:		/sys/devices/platform/samsung/usb_charge
 Date:		December 1, 2011
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_acpi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
index f34221b52b14..e5a438d84e1f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
@@ -4,10 +4,12 @@ KernelVersion:	3.15
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the keyboard backlight operation mode, valid
 		values are:
+
 			* 0x1  -> FN-Z
 			* 0x2  -> AUTO (also called TIMER)
 			* 0x8  -> ON
 			* 0x10 -> OFF
+
 		Note that from kernel 3.16 onwards this file accepts all listed
 		parameters, kernel 3.15 only accepts the first two (FN-Z and
 		AUTO).
@@ -41,8 +43,10 @@ KernelVersion:	3.15
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This files controls the status of the touchpad and pointing
 		stick (if available), valid values are:
+
 			* 0 -> OFF
 			* 1 -> ON
+
 Users:		KToshiba
 
 What:		/sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/available_kbd_modes
@@ -51,10 +55,12 @@ KernelVersion:	3.16
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file shows the supported keyboard backlight modes
 		the system supports, which can be:
+
 			* 0x1  -> FN-Z
 			* 0x2  -> AUTO (also called TIMER)
 			* 0x8  -> ON
 			* 0x10 -> OFF
+
 		Note that not all keyboard types support the listed modes.
 		See the entry named "available_kbd_modes"
 Users:		KToshiba
@@ -65,6 +71,7 @@ KernelVersion:	3.16
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file shows the current keyboard backlight type,
 		which can be:
+
 			* 1 -> Type 1, supporting modes FN-Z and AUTO
 			* 2 -> Type 2, supporting modes TIMER, ON and OFF
 Users:		KToshiba
@@ -75,10 +82,12 @@ KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the USB Sleep & Charge charging mode, which
 		can be:
+
 			* 0 -> Disabled		(0x00)
 			* 1 -> Alternate	(0x09)
 			* 2 -> Auto		(0x21)
 			* 3 -> Typical		(0x11)
+
 		Note that from kernel 4.1 onwards this file accepts all listed
 		values, kernel 4.0 only supports the first three.
 		Note that this feature only works when connected to power, if
@@ -93,8 +102,10 @@ Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the USB Sleep Functions under battery, and
 		set the level at which point they will be disabled, accepted
 		values can be:
+
 			* 0	-> Disabled
 			* 1-100	-> Battery level to disable sleep functions
+
 		Currently it prints two values, the first one indicates if the
 		feature is enabled or disabled, while the second one shows the
 		current battery level set.
@@ -107,8 +118,10 @@ Date:		January 23, 2015
 KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the USB Rapid Charge state, which can be:
+
 			* 0 -> Disabled
 			* 1 -> Enabled
+
 		Note that toggling this value requires a reboot for changes to
 		take effect.
 Users:		KToshiba
@@ -118,8 +131,10 @@ Date:		January 23, 2015
 KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the Sleep & Music state, which values can be:
+
 			* 0 -> Disabled
 			* 1 -> Enabled
+
 		Note that this feature only works when connected to power, if
 		you want to use it under battery, see the entry named
 		"sleep_functions_on_battery"
@@ -138,6 +153,7 @@ KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the state of the internal fan, valid
 		values are:
+
 			* 0 -> OFF
 			* 1 -> ON
 
@@ -147,8 +163,10 @@ KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the Special Functions (hotkeys) operation
 		mode, valid values are:
+
 			* 0 -> Normal Operation
 			* 1 -> Special Functions
+
 		In the "Normal Operation" mode, the F{1-12} keys are as usual
 		and the hotkeys are accessed via FN-F{1-12}.
 		In the "Special Functions" mode, the F{1-12} keys trigger the
@@ -163,8 +181,10 @@ KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls whether the laptop should turn ON whenever
 		the LID is opened, valid values are:
+
 			* 0 -> Disabled
 			* 1 -> Enabled
+
 		Note that toggling this value requires a reboot for changes to
 		take effect.
 Users:		KToshiba
@@ -174,8 +194,10 @@ Date:		February 12, 2015
 KernelVersion:	4.0
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the USB 3 functionality, valid values are:
+
 			* 0 -> Disabled (Acts as a regular USB 2)
 			* 1 -> Enabled (Full USB 3 functionality)
+
 		Note that toggling this value requires a reboot for changes to
 		take effect.
 Users:		KToshiba
@@ -188,10 +210,14 @@ Description:	This file controls the Cooling Method feature.
 		Reading this file prints two values, the first is the actual cooling method
 		and the second is the maximum cooling method supported.
 		When the maximum cooling method is ONE, valid values are:
+
 			* 0 -> Maximum Performance
 			* 1 -> Battery Optimized
+
 		When the maximum cooling method is TWO, valid values are:
+
 			* 0 -> Maximum Performance
 			* 1 -> Performance
 			* 2 -> Battery Optimized
+
 Users:		KToshiba
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_haps linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_haps
index a662370b4dbf..c938690ce10d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_haps
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-toshiba_haps
@@ -4,10 +4,12 @@ KernelVersion:	3.17
 Contact:	Azael Avalos <coproscefalo@gmail.com>
 Description:	This file controls the built-in accelerometer protection level,
 		valid values are:
+
 			* 0 -> Disabled
 			* 1 -> Low
 			* 2 -> Medium
 			* 3 -> High
+
 		The default potection value is set to 2 (Medium).
 Users:		KToshiba
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index d1a352194d2e..adc0d0e91607 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -18,6 +18,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device type. This is one of the UFS
 		device descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
@@ -26,6 +27,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device class. This is one of the UFS
 		device descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
@@ -34,6 +36,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the UFS storage subclass. This is one of
 		the UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
@@ -43,6 +46,7 @@ Description:	This file shows the protocol supported by an UFS device.
 		This is one of the UFS device descriptor parameters.
 		The full information about the descriptor could be found
 		at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
@@ -51,6 +55,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows number of logical units. This is one of
 		the UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
@@ -60,6 +65,7 @@ Description:	This file shows number of well known logical units.
 		This is one of the UFS device descriptor parameters.
 		The full information about the descriptor could be found
 		at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
@@ -69,6 +75,7 @@ Description:	This file shows value that indicates whether the device is
 		enabled for boot. This is one of the UFS device descriptor
 		parameters. The full information about the descriptor could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
@@ -79,6 +86,7 @@ Description:	This file shows value that indicates whether the device
 		of the boot sequence. This is one of the UFS device descriptor
 		parameters. The full information about the descriptor could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
@@ -88,6 +96,7 @@ Description:	This file shows value that defines the power mode after
 		device initialization or hardware reset. This is one of
 		the UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
@@ -96,6 +105,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the high priority lun. This is one of
 		the UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
@@ -104,6 +114,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the secure removal type. This is one of
 		the UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
@@ -113,6 +124,7 @@ Description:	This file shows whether the security lun is supported.
 		This is one of the UFS device descriptor parameters.
 		The full information about the descriptor could be found
 		at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
@@ -122,6 +134,7 @@ Description:	This file shows the background operations termination
 		latency. This is one of the UFS device descriptor parameters.
 		The full information about the descriptor could be found
 		at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
@@ -130,6 +143,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the initial active ICC level. This is one
 		of the UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
@@ -138,6 +152,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the specification version. This is one
 		of the UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
@@ -147,6 +162,7 @@ Description:	This file shows the manufacturing date in BCD format.
 		This is one of the UFS device descriptor parameters.
 		The full information about the descriptor could be found
 		at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
@@ -155,6 +171,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the manufacturee ID. This is one of the
 		UFS device descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
@@ -164,6 +181,7 @@ Description:	This file shows the maximum number of outstanding RTTs
 		supported by the device. This is one of the UFS device
 		descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
@@ -173,6 +191,7 @@ Description:	This file shows the frequency and method of the realtime
 		clock update. This is one of the UFS device descriptor
 		parameters. The full information about the descriptor
 		could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
@@ -182,6 +201,7 @@ Description:	This file shows which features are supported by the device.
 		This is one of the UFS device descriptor parameters.
 		The full information about the descriptor could be
 		found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
@@ -190,6 +210,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the FFU timeout. This is one of the
 		UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
@@ -198,6 +219,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device queue depth. This is one of the
 		UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
@@ -206,6 +228,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device version. This is one of the
 		UFS device descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
@@ -215,6 +238,7 @@ Description:	This file shows number of secure write protect areas
 		supported by the device. This is one of the UFS device
 		descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
@@ -225,6 +249,7 @@ Description:	This file shows the maximum amount of data that may be
 		This is one of the UFS device descriptor parameters.
 		The full information about the descriptor could be found
 		at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
@@ -234,6 +259,7 @@ Description:	This file shows the command maximum timeout for a change
 		in PSA state. This is one of the UFS device descriptor
 		parameters. The full information about the descriptor could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -244,6 +270,7 @@ Description:	This file shows the MIPI UniPro version number in BCD format.
 		This is one of the UFS interconnect descriptor parameters.
 		The full information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
@@ -253,6 +280,7 @@ Description:	This file shows the MIPI M-PHY version number in BCD format.
 		This is one of the UFS interconnect descriptor parameters.
 		The full information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -264,6 +292,7 @@ Description:	This file shows the total memory quantity available to
 		of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
@@ -273,6 +302,7 @@ Description:	This file shows the maximum number of logical units
 		supported by the UFS device. This is one of the UFS
 		geometry descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
@@ -281,6 +311,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the segment size. This is one of the UFS
 		geometry descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
@@ -289,6 +320,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the allocation unit size. This is one of
 		the UFS geometry descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
@@ -298,6 +330,7 @@ Description:	This file shows the minimum addressable block size. This
 		is one of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at UFS
 		specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
@@ -307,6 +340,7 @@ Description:	This file shows the optimal read block size. This is one
 		of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at UFS
 		specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
@@ -316,6 +350,7 @@ Description:	This file shows the optimal write block size. This is one
 		of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at UFS
 		specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
@@ -325,6 +360,7 @@ Description:	This file shows the maximum data-in buffer size. This
 		is one of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at UFS
 		specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
@@ -334,6 +370,7 @@ Description:	This file shows the maximum data-out buffer size. This
 		is one of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at UFS
 		specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
@@ -343,6 +380,7 @@ Description:	This file shows the maximum number of RPMB frames allowed
 		in Security Protocol In/Out. This is one of the UFS geometry
 		descriptor parameters. The full information about the
 		descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
@@ -352,6 +390,7 @@ Description:	This file shows the dynamic capacity resource policy. This
 		is one of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
@@ -361,6 +400,7 @@ Description:	This file shows support for out-of-order data transfer.
 		This is one of the UFS geometry descriptor parameters.
 		The full information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
@@ -370,6 +410,7 @@ Description:	This file shows maximum available number of contexts which
 		are supported by the device. This is one of the UFS geometry
 		descriptor parameters. The full information about the
 		descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
@@ -378,6 +419,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows system data tag unit size. This is one of
 		the UFS geometry descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
@@ -388,6 +430,7 @@ Description:	This file shows maximum storage area size allocated by
 		This is one of the UFS geometry descriptor parameters.
 		The full information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
@@ -397,6 +440,7 @@ Description:	This file shows supported secure removal types. This is
 		one of the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
@@ -406,6 +450,7 @@ Description:	This file shows supported memory types. This is one of
 		the UFS geometry descriptor parameters. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
@@ -416,6 +461,7 @@ Description:	This file shows the maximum number of allocation units for
 		enhanced type 1-4). This is one of the UFS geometry
 		descriptor parameters. The full information about the
 		descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
@@ -426,6 +472,7 @@ Description:	This file shows the memory capacity adjustment factor for
 		enhanced type 1-4). This is one of the UFS geometry
 		descriptor parameters. The full information about the
 		descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -436,6 +483,7 @@ Description:	This file shows preend of life information. This is one
 		of the UFS health descriptor parameters. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
@@ -445,6 +493,7 @@ Description:	This file shows indication of the device life time
 		(method a). This is one of the UFS health descriptor
 		parameters. The full information about the descriptor
 		could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
@@ -454,6 +503,7 @@ Description:	This file shows indication of the device life time
 		(method b). This is one of the UFS health descriptor
 		parameters. The full information about the descriptor
 		could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -464,6 +514,7 @@ Description:	This file shows maximum VCC, VCCQ and VCCQ2 value for
 		active ICC levels from 0 to 15. This is one of the UFS
 		power descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -473,6 +524,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a device manufactureer name string.
 		The full information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
@@ -480,6 +532,7 @@ Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a product name string. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
@@ -487,6 +540,7 @@ Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a OEM ID string. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
@@ -495,6 +549,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a device serial number string. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
@@ -503,6 +558,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a product revision string. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -512,6 +568,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows boot LUN information. This is one of
 		the UFS unit descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
@@ -520,6 +577,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows LUN write protection status. This is one of
 		the UFS unit descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
@@ -528,6 +586,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows LUN queue depth. This is one of the UFS
 		unit descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
@@ -536,6 +595,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows PSA sensitivity. This is one of the UFS
 		unit descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
@@ -544,6 +604,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows LUN memory type. This is one of the UFS
 		unit descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/data_reliability
@@ -553,6 +614,7 @@ Description:	This file defines the device behavior when a power failure
 		occurs during a write operation. This is one of the UFS
 		unit descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
@@ -562,6 +624,7 @@ Description:	This file shows the size of addressable logical blocks
 		(calculated as an exponent with base 2). This is one of
 		the UFS unit descriptor parameters. The full information about
 		the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
@@ -571,6 +634,7 @@ Description:	This file shows total number of addressable logical blocks.
 		This is one of the UFS unit descriptor parameters. The full
 		information about the descriptor could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
@@ -579,6 +643,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the erase block size. This is one of
 		the UFS unit descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
@@ -587,6 +652,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the thin provisioning type. This is one of
 		the UFS unit descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
@@ -595,6 +661,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
 		one of the UFS unit descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
@@ -603,6 +670,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the context capabilities. This is one of
 		the UFS unit descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
@@ -611,6 +679,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the granularity of the LUN. This is one of
 		the UFS unit descriptor parameters. The full information
 		about the descriptor could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -619,6 +688,7 @@ Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device init status. The full information
 		about the flag could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
@@ -627,6 +697,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether permanent write protection is enabled.
 		The full information about the flag could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
@@ -636,6 +707,7 @@ Description:	This file shows whether write protection is enabled on all
 		logical units configured as power on write protected. The
 		full information about the flag could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
@@ -644,6 +716,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device background operations are
 		enabled. The full information about the flag could be
 		found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
@@ -652,6 +725,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device life span mode is enabled.
 		The full information about the flag could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
@@ -660,6 +734,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether physical resource removal is enable.
 		The full information about the flag could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
@@ -668,6 +743,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device is executing internal
 		operation related to real time clock. The full information
 		about the flag could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
@@ -676,6 +752,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device FW update is permanently
 		disabled. The full information about the flag could be found
 		at UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -685,6 +762,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the boot lun enabled UFS device attribute.
 		The full information about the attribute could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
@@ -693,6 +771,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the current power mode UFS device attribute.
 		The full information about the attribute could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
@@ -701,6 +780,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the active icc level UFS device attribute.
 		The full information about the attribute could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
@@ -709,6 +789,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the out of order data transfer enabled UFS
 		device attribute. The full information about the attribute
 		could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
@@ -717,6 +798,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the background operations status UFS device
 		attribute. The full information about the attribute could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
@@ -725,6 +807,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the purge operation status UFS device
 		attribute. The full information about the attribute could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
@@ -733,6 +816,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum data size in a DATA IN
 		UPIU. The full information about the attribute could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
@@ -741,6 +825,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum number of bytes that can be
 		requested with a READY TO TRANSFER UPIU. The full information
 		about the attribute could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
@@ -749,6 +834,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the reference clock frequency UFS device
 		attribute. The full information about the attribute could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
@@ -765,6 +851,7 @@ Description:	This file provides the maximum current number of
 		outstanding RTTs in device that is allowed. The full
 		information about the attribute could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
@@ -773,6 +860,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the exception event control UFS device
 		attribute. The full information about the attribute could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
@@ -781,6 +869,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the exception event status UFS device
 		attribute. The full information about the attribute could
 		be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
@@ -789,6 +878,7 @@ Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the ffu status UFS device attribute.
 		The full information about the attribute could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
@@ -796,6 +886,7 @@ Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file show the PSA feature status. The full information
 		about the attribute could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
@@ -805,6 +896,7 @@ Description:	This file shows the amount of data that the host plans to
 		load to all logical units in pre-soldering state.
 		The full information about the attribute could be found at
 		UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -815,6 +907,7 @@ Description:	This file shows the The amount of physical memory needed
 		to be removed from the physical memory resources pool of
 		the particular logical unit. The full information about
 		the attribute could be found at UFS specifications 2.1.
+
 		The file is read only.
 
 
@@ -824,24 +917,28 @@ Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry could be used to set or show the UFS device
 		runtime power management level. The current driver
 		implementation supports 6 levels with next target states:
-		0 - an UFS device will stay active, an UIC link will
-		stay active
-		1 - an UFS device will stay active, an UIC link will
-		hibernate
-		2 - an UFS device will moved to sleep, an UIC link will
-		stay active
-		3 - an UFS device will moved to sleep, an UIC link will
-		hibernate
-		4 - an UFS device will be powered off, an UIC link will
-		hibernate
-		5 - an UFS device will be powered off, an UIC link will
-		be powered off
+
+		==  ====================================================
+		0   an UFS device will stay active, an UIC link will
+		    stay active
+		1   an UFS device will stay active, an UIC link will
+		    hibernate
+		2   an UFS device will moved to sleep, an UIC link will
+		    stay active
+		3   an UFS device will moved to sleep, an UIC link will
+		    hibernate
+		4   an UFS device will be powered off, an UIC link will
+		    hibernate
+		5   an UFS device will be powered off, an UIC link will
+		    be powered off
+		==  ====================================================
 
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
 Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target power mode of an UFS device
 		for the chosen runtime power management level.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
@@ -849,6 +946,7 @@ Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target state of an UFS UIC link
 		for the chosen runtime power management level.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_lvl
@@ -857,24 +955,28 @@ Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry could be used to set or show the UFS device
 		system power management level. The current driver
 		implementation supports 6 levels with next target states:
-		0 - an UFS device will stay active, an UIC link will
-		stay active
-		1 - an UFS device will stay active, an UIC link will
-		hibernate
-		2 - an UFS device will moved to sleep, an UIC link will
-		stay active
-		3 - an UFS device will moved to sleep, an UIC link will
-		hibernate
-		4 - an UFS device will be powered off, an UIC link will
-		hibernate
-		5 - an UFS device will be powered off, an UIC link will
-		be powered off
+
+		==  ====================================================
+		0   an UFS device will stay active, an UIC link will
+		    stay active
+		1   an UFS device will stay active, an UIC link will
+		    hibernate
+		2   an UFS device will moved to sleep, an UIC link will
+		    stay active
+		3   an UFS device will moved to sleep, an UIC link will
+		    hibernate
+		4   an UFS device will be powered off, an UIC link will
+		    hibernate
+		5   an UFS device will be powered off, an UIC link will
+		    be powered off
+		==  ====================================================
 
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
 Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target power mode of an UFS device
 		for the chosen system power management level.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
@@ -882,18 +984,21 @@ Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target state of an UFS UIC link
 		for the chosen system power management level.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows if preserve user-space was configured
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the shared allocated units of WB buffer
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
@@ -901,6 +1006,7 @@ Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the configured WB type.
 		0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
@@ -910,6 +1016,7 @@ Description:	This entry shows the total user-space decrease in shared
 		buffer mode.
 		The value of this parameter is 3 for TLC NAND when SLC mode
 		is used as WriteBooster Buffer. 2 for MLC NAND.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
@@ -917,6 +1024,7 @@ Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the Maximum total WriteBooster Buffer size
 		which is supported by the entire device.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
@@ -924,6 +1032,7 @@ Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the maximum number of luns that can support
 		WriteBooster.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
@@ -937,46 +1046,59 @@ Description:	The supportability of user space reduction mode
 		preserve user space type.
 		02h: Device can be configured in either user space
 		reduction type or preserve user space type.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	The supportability of WriteBooster Buffer type.
-		00h: LU based WriteBooster Buffer configuration
-		01h: Single shared WriteBooster Buffer
-		configuration
-		02h: Supporting both LU based WriteBooster
-		Buffer and Single shared WriteBooster Buffer
-		configuration
+
+		===  ==========================================================
+		00h  LU based WriteBooster Buffer configuration
+		01h  Single shared WriteBooster Buffer configuration
+		02h  Supporting both LU based WriteBooster.
+		     Buffer and Single shared WriteBooster Buffer configuration
+		===  ==========================================================
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the status of WriteBooster.
-		0: WriteBooster is not enabled.
-		1: WriteBooster is enabled
+
+		== ============================
+		0  WriteBooster is not enabled.
+		1  WriteBooster is enabled
+		== ============================
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows if flush is enabled.
-		0: Flush operation is not performed.
-		1: Flush operation is performed.
+
+		== =================================
+		0  Flush operation is not performed.
+		1  Flush operation is performed.
+		== =================================
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	Flush WriteBooster Buffer during hibernate state.
-		0: Device is not allowed to flush the
-		WriteBooster Buffer during link hibernate
-		state.
-		1: Device is allowed to flush the
-		WriteBooster Buffer during link hibernate
-		state
+
+		== =================================================
+		0  Device is not allowed to flush the
+		   WriteBooster Buffer during link hibernate state.
+		1  Device is allowed to flush the
+		   WriteBooster Buffer during link hibernate state.
+		== =================================================
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
@@ -984,23 +1106,30 @@ Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the amount of unused WriteBooster buffer
 		available.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the amount of unused current buffer.
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the flush operation status.
-		00h: idle
-		01h: Flush operation in progress
-		02h: Flush operation stopped prematurely.
-		03h: Flush operation completed successfully
-		04h: Flush operation general failure
+
+
+		===  ======================================
+		00h  idle
+		01h  Flush operation in progress
+		02h  Flush operation stopped prematurely.
+		03h  Flush operation completed successfully
+		04h  Flush operation general failure
+		===  ======================================
+
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
@@ -1008,9 +1137,13 @@ Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows an indication of the WriteBooster Buffer
 		lifetime based on the amount of performed program/erase cycles
-		01h: 0% - 10% WriteBooster Buffer life time used
+
+		===  =============================================
+		01h  0% - 10% WriteBooster Buffer life time used
 		...
-		0Ah: 90% - 100% WriteBooster Buffer life time used
+		0Ah  90% - 100% WriteBooster Buffer life time used
+		===  =============================================
+
 		The file is read only.
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
@@ -1018,4 +1151,5 @@ Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the configured size of WriteBooster buffer.
 		0400h corresponds to 4GB.
+
 		The file is read only.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
index d301e7017afe..e92aba4eb594 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
@@ -5,7 +5,9 @@ Contact:	Jan Kandziora <jjj@gmx.de>
 Description:	When written, this file sets the I2C speed on the connected
 		DS28E17 chip. When read, it reads the current setting from
 		the DS28E17 chip.
+
 		Valid values: 100, 400, 900 [kBaud].
+
 		Default 100, can be set by w1_ds28e17.speed= module parameter.
 Users:		w1_ds28e17 driver
 
@@ -17,5 +19,6 @@ Description:	When written, this file sets the multiplier used to calculate
 		the busy timeout for I2C operations on the connected DS28E17
 		chip. When read, returns the current setting.
 		Valid values: 1 to 9.
+
 		Default 1, can be set by w1_ds28e17.stretch= module parameter.
 Users:		w1_ds28e17 driver
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-w1_therm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-w1_therm
index 9b488c0afdfa..6a37dc33ffdb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-w1_therm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-w1_therm
@@ -22,8 +22,10 @@ Description:
 		device data to its embedded EEPROM, either restore data
 		embedded in device EEPROM. Be aware that devices support
 		limited EEPROM writing cycles (typical 50k)
+
 			* 'save': save device RAM to EEPROM
 			* 'restore': restore EEPROM data in device RAM
+
 Users:		any user space application which wants to communicate with
 		w1_term device
 
@@ -33,9 +35,11 @@ Date:		May 2020
 Contact:	Akira Shimahara <akira215corp@gmail.com>
 Description:
 		(RO) return the power status by asking the device
+
 			* '0': device parasite powered
 			* '1': device externally powered
 			* '-xx': xx is kernel error when reading power status
+
 Users:		any user space application which wants to communicate with
 		w1_term device
 
@@ -49,10 +53,15 @@ Description:
 		will be changed only in device RAM, so it will be cleared when
 		power is lost. Trigger a 'save' to EEPROM command to keep
 		values after power-on. Read or write are :
-			* '9..12': device resolution in bit
-			or resolution to set in bit
+
+			* '9..14': device resolution in bit
+			  or resolution to set in bit
 			* '-xx': xx is kernel error when reading the resolution
 			* Anything else: do nothing
+
+		Some DS18B20 clones are fixed in 12-bit resolution, so the
+		actual resolution is read back from the chip and verified. Error
+		is reported if the results differ.
 Users:		any user space application which wants to communicate with
 		w1_term device
 
@@ -62,16 +71,18 @@ Date:		May 2020
 Contact:	Akira Shimahara <akira215corp@gmail.com>
 Description:
 		(RO) return the temperature in 1/1000 degC.
+
 			* If a bulk read has been triggered, it will directly
-			return the temperature computed when the bulk read
-			occurred, if available. If not yet available, nothing
-			is returned (a debug kernel message is sent), you
-			should retry later on.
+			  return the temperature computed when the bulk read
+			  occurred, if available. If not yet available, nothing
+			  is returned (a debug kernel message is sent), you
+			  should retry later on.
 			* If no bulk read has been triggered, it will trigger
-			a conversion and send the result. Note that the
-			conversion duration depend on the resolution (if
-			device support this feature). It takes 94ms in 9bits
-			resolution, 750ms for 12bits.
+			  a conversion and send the result. Note that the
+			  conversion duration depend on the resolution (if
+			  device support this feature). It takes 94ms in 9bits
+			  resolution, 750ms for 12bits.
+
 Users:		any user space application which wants to communicate with
 		w1_term device
 
@@ -83,12 +94,14 @@ Description:
 		(RW) return the temperature in 1/1000 degC.
 		*read*: return 2 lines with the hexa output data sent on the
 		bus, return the CRC check and temperature in 1/1000 degC
-		*write* :
+		*write*:
+
 			* '0' : save the 2 or 3 bytes to the device EEPROM
-			(i.e. TH, TL and config register)
-			* '9..12' : set the device resolution in RAM
-			(if supported)
+			  (i.e. TH, TL and config register)
+			* '9..14' : set the device resolution in RAM
+			  (if supported)
 			* Anything else: do nothing
+
 		refer to Documentation/w1/slaves/w1_therm.rst for detailed
 		information.
 Users:		any user space application which wants to communicate with
@@ -100,17 +113,78 @@ Date:		May 2020
 Contact:	Akira Shimahara <akira215corp@gmail.com>
 Description:
 		(RW) trigger a bulk read conversion. read the status
+
 		*read*:
-			* '-1': conversion in progress on at least 1 sensor
-			* '1' :	conversion complete but at least one sensor
+			* '-1':
+				conversion in progress on at least 1 sensor
+			* '1' :
+				conversion complete but at least one sensor
 				value has not been read yet
-			* '0' :	no bulk operation. Reading temperature will
+			* '0' :
+				no bulk operation. Reading temperature will
 				trigger a conversion on each device
-		*write*: 'trigger': trigger a bulk read on all supporting
+
+		*write*:
+			'trigger': trigger a bulk read on all supporting
 			devices on the bus
+
 		Note that if a bulk read is sent but one sensor is not read
 		immediately, the next access to temperature on this device
 		will return the temperature measured at the time of issue
 		of the bulk read command (not the current temperature).
 Users:		any user space application which wants to communicate with
 		w1_term device
+
+
+What:		/sys/bus/w1/devices/.../conv_time
+Date:		July 2020
+Contact:	Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
+Description:
+		(RW) Get, set, or measure a temperature conversion time. The
+		setting remains active until a resolution change. Then it is
+		reset to default (datasheet) conversion time for a new
+		resolution.
+
+		*read*:
+			Actual conversion time in milliseconds.
+
+		*write*:
+			* '0':
+			     Set the default conversion time from the datasheet.
+			* '1':
+			     Measure and set the conversion time. Make a single
+			     temperature conversion, measure an actual value.
+			     Increase it by 20% for temperature range. A new
+			     conversion time can be obtained by reading this
+			     same attribute.
+			* other positive value:
+			     Set the conversion time in milliseconds.
+
+Users:		An application using the w1_term device
+
+
+What:		/sys/bus/w1/devices/.../features
+Date:		July 2020
+Contact:	Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
+Description:
+		(RW) Control optional driver settings.
+		Bit masks to read/write (bitwise OR):
+
+		== ============================================================
+                 1 Enable check for conversion success. If byte 6 of
+                   scratchpad memory is 0xC after conversion, and
+                   temperature reads 85.00 (powerup value) or 127.94
+                   (insufficient power) - return a conversion error.
+
+                2  Enable poll for conversion completion. Generate read cycles
+                   after the conversion start and wait for 1's. In parasite
+                   power mode this feature is not available.
+		== ============================================================
+
+		*read*:
+		    Currently selected features.
+
+		*write*:
+		    Select features.
+
+Users:		An application using the w1_term device
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-wacom linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-wacom
index afc48fc163b5..16acaa5712ec 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-wacom
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-wacom
@@ -79,7 +79,9 @@ Description:
 		When the Wacom Intuos 4 is connected over Bluetooth, the
 		image has to contain 256 bytes (64x32 px 1 bit colour).
 		The format is also scrambled, like in the USB mode, and it can
-		be summarized by converting 76543210 into GECA6420.
+		be summarized by converting::
+
+					    76543210 into GECA6420.
 					    HGFEDCBA      HFDB7531
 
 What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
index ecb7942ff146..ac2947b98950 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -35,3 +35,12 @@ Description:
                 controls the duration in milliseconds that blkback will not
                 cache any page not backed by a grant mapping.
                 The default is 10ms.
+
+What:           /sys/module/xen_blkback/parameters/feature_persistent
+Date:           September 2020
+KernelVersion:  5.10
+Contact:        SeongJae Park <sjpark@amazon.de>
+Description:
+                Whether to enable the persistent grants feature or not.  Note
+                that this option only takes effect on newly created backends.
+                The default is Y (enable).
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
index c0a6cb7eb314..28008905615f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -1,4 +1,4 @@
-What:           /sys/module/xen_blkfront/parameters/max
+What:           /sys/module/xen_blkfront/parameters/max_indirect_segments
 Date:           June 2013
 KernelVersion:  3.11
 Contact:        Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
@@ -8,3 +8,12 @@ Description:
                 is 32 - higher value means more potential throughput but more
                 memory usage. The backend picks the minimum of the frontend
                 and its default backend value.
+
+What:           /sys/module/xen_blkfront/parameters/feature_persistent
+Date:           September 2020
+KernelVersion:  5.10
+Contact:        SeongJae Park <sjpark@amazon.de>
+Description:
+                Whether to enable the persistent grants feature or not.  Note
+                that this option only takes effect on newly created frontends.
+                The default is Y (enable).
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-acpi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-acpi
index 613f42a9d5cd..b16d30a71709 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-acpi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -12,11 +12,14 @@ Description:
 		image: The image bitmap. Currently a 32-bit BMP.
 		status: 1 if the image is valid, 0 if firmware invalidated it.
 		type: 0 indicates image is in BMP format.
+
+		======== ===================================================
 		version: The version of the BGRT. Currently 1.
 		xoffset: The number of pixels between the left of the screen
 			 and the left edge of the image.
 		yoffset: The number of pixels between the top of the screen
 			 and the top edge of the image.
+		======== ===================================================
 
 What:		/sys/firmware/acpi/hotplug/
 Date:		February 2013
@@ -33,12 +36,14 @@ Description:
 		The following setting is available to user space for each
 		hotplug profile:
 
+		======== =======================================================
 		enabled: If set, the ACPI core will handle notifications of
-			hotplug events associated with the given class of
-			devices and will allow those devices to be ejected with
-			the help of the _EJ0 control method.  Unsetting it
-			effectively disables hotplug for the correspoinding
-			class of devices.
+			 hotplug events associated with the given class of
+			 devices and will allow those devices to be ejected with
+			 the help of the _EJ0 control method.  Unsetting it
+			 effectively disables hotplug for the correspoinding
+			 class of devices.
+		======== =======================================================
 
 		The value of the above attribute is an integer number: 1 (set)
 		or 0 (unset).  Attempts to write any other values to it will
@@ -71,86 +76,90 @@ Description:
 		To figure out where all the SCI's are coming from,
 		/sys/firmware/acpi/interrupts contains a file listing
 		every possible source, and the count of how many
-		times it has triggered.
-
-		$ cd /sys/firmware/acpi/interrupts
-		$ grep . *
-		error:	     0
-		ff_gbl_lock:	   0   enable
-		ff_pmtimer:	  0  invalid
-		ff_pwr_btn:	  0   enable
-		ff_rt_clk:	 2  disable
-		ff_slp_btn:	  0  invalid
-		gpe00:	     0	invalid
-		gpe01:	     0	 enable
-		gpe02:	   108	 enable
-		gpe03:	     0	invalid
-		gpe04:	     0	invalid
-		gpe05:	     0	invalid
-		gpe06:	     0	 enable
-		gpe07:	     0	 enable
-		gpe08:	     0	invalid
-		gpe09:	     0	invalid
-		gpe0A:	     0	invalid
-		gpe0B:	     0	invalid
-		gpe0C:	     0	invalid
-		gpe0D:	     0	invalid
-		gpe0E:	     0	invalid
-		gpe0F:	     0	invalid
-		gpe10:	     0	invalid
-		gpe11:	     0	invalid
-		gpe12:	     0	invalid
-		gpe13:	     0	invalid
-		gpe14:	     0	invalid
-		gpe15:	     0	invalid
-		gpe16:	     0	invalid
-		gpe17:	  1084	 enable
-		gpe18:	     0	 enable
-		gpe19:	     0	invalid
-		gpe1A:	     0	invalid
-		gpe1B:	     0	invalid
-		gpe1C:	     0	invalid
-		gpe1D:	     0	invalid
-		gpe1E:	     0	invalid
-		gpe1F:	     0	invalid
-		gpe_all:    1192
-		sci:	1194
-		sci_not:     0	
-
-		sci - The number of times the ACPI SCI
-		has been called and claimed an interrupt.
-
-		sci_not - The number of times the ACPI SCI
-		has been called and NOT claimed an interrupt.
-
-		gpe_all - count of SCI caused by GPEs.
-
-		gpeXX - count for individual GPE source
-
-		ff_gbl_lock - Global Lock
-
-		ff_pmtimer - PM Timer
-
-		ff_pwr_btn - Power Button
-
-		ff_rt_clk - Real Time Clock
-
-		ff_slp_btn - Sleep Button
-
-		error - an interrupt that can't be accounted for above.
-
-		invalid: it's either a GPE or a Fixed Event that
-			doesn't have an event handler.
-
-		disable: the GPE/Fixed Event is valid but disabled.
-
-		enable: the GPE/Fixed Event is valid and enabled.
-
-		Root has permission to clear any of these counters.  Eg.
-		# echo 0 > gpe11
-
-		All counters can be cleared by clearing the total "sci":
-		# echo 0 > sci
+		times it has triggered::
+
+		  $ cd /sys/firmware/acpi/interrupts
+		  $ grep . *
+		  error:	     0
+		  ff_gbl_lock:	     0   enable
+		  ff_pmtimer:	     0  invalid
+		  ff_pwr_btn:	     0   enable
+		  ff_rt_clk:	     2  disable
+		  ff_slp_btn:	     0  invalid
+		  gpe00:	     0	invalid
+		  gpe01:	     0	 enable
+		  gpe02:	   108	 enable
+		  gpe03:	     0	invalid
+		  gpe04:	     0	invalid
+		  gpe05:	     0	invalid
+		  gpe06:	     0	 enable
+		  gpe07:	     0	 enable
+		  gpe08:	     0	invalid
+		  gpe09:	     0	invalid
+		  gpe0A:	     0	invalid
+		  gpe0B:	     0	invalid
+		  gpe0C:	     0	invalid
+		  gpe0D:	     0	invalid
+		  gpe0E:	     0	invalid
+		  gpe0F:	     0	invalid
+		  gpe10:	     0	invalid
+		  gpe11:	     0	invalid
+		  gpe12:	     0	invalid
+		  gpe13:	     0	invalid
+		  gpe14:	     0	invalid
+		  gpe15:	     0	invalid
+		  gpe16:	     0	invalid
+		  gpe17:	  1084	 enable
+		  gpe18:	     0	 enable
+		  gpe19:	     0	invalid
+		  gpe1A:	     0	invalid
+		  gpe1B:	     0	invalid
+		  gpe1C:	     0	invalid
+		  gpe1D:	     0	invalid
+		  gpe1E:	     0	invalid
+		  gpe1F:	     0	invalid
+		  gpe_all:	  1192
+		  sci:		  1194
+		  sci_not:	     0
+
+		===========  ==================================================
+		sci	     The number of times the ACPI SCI
+			     has been called and claimed an interrupt.
+
+		sci_not	     The number of times the ACPI SCI
+			     has been called and NOT claimed an interrupt.
+
+		gpe_all	     count of SCI caused by GPEs.
+
+		gpeXX	     count for individual GPE source
+
+		ff_gbl_lock  Global Lock
+
+		ff_pmtimer   PM Timer
+
+		ff_pwr_btn   Power Button
+
+		ff_rt_clk    Real Time Clock
+
+		ff_slp_btn   Sleep Button
+
+		error	     an interrupt that can't be accounted for above.
+
+		invalid      it's either a GPE or a Fixed Event that
+			     doesn't have an event handler.
+
+		disable	     the GPE/Fixed Event is valid but disabled.
+
+		enable       the GPE/Fixed Event is valid and enabled.
+		===========  ==================================================
+
+		Root has permission to clear any of these counters.  Eg.::
+
+		  # echo 0 > gpe11
+
+		All counters can be cleared by clearing the total "sci"::
+
+		  # echo 0 > sci
 
 		None of these counters has an effect on the function
 		of the system, they are simply statistics.
@@ -165,32 +174,34 @@ Description:
 
 		Let's take power button fixed event for example, please kill acpid
 		and other user space applications so that the machine won't shutdown
-		when pressing the power button.
-		# cat ff_pwr_btn
-		0	enabled
-		# press the power button for 3 times;
-		# cat ff_pwr_btn
-		3	enabled
-		# echo disable > ff_pwr_btn
-		# cat ff_pwr_btn
-		3	disabled
-		# press the power button for 3 times;
-		# cat ff_pwr_btn
-		3	disabled
-		# echo enable > ff_pwr_btn
-		# cat ff_pwr_btn
-		4	enabled
-		/*
-		 * this is because the status bit is set even if the enable bit is cleared,
-		 * and it triggers an ACPI fixed event when the enable bit is set again
-		 */
-		# press the power button for 3 times;
-		# cat ff_pwr_btn
-		7	enabled
-		# echo disable > ff_pwr_btn
-		# press the power button for 3 times;
-		# echo clear > ff_pwr_btn	/* clear the status bit */
-		# echo disable > ff_pwr_btn
-		# cat ff_pwr_btn
-		7	enabled
+		when pressing the power button::
+
+		  # cat ff_pwr_btn
+		  0	enabled
+		  # press the power button for 3 times;
+		  # cat ff_pwr_btn
+		  3	enabled
+		  # echo disable > ff_pwr_btn
+		  # cat ff_pwr_btn
+		  3	disabled
+		  # press the power button for 3 times;
+		  # cat ff_pwr_btn
+		  3	disabled
+		  # echo enable > ff_pwr_btn
+		  # cat ff_pwr_btn
+		  4	enabled
+		  /*
+		   * this is because the status bit is set even if the enable
+		   * bit is cleared, and it triggers an ACPI fixed event when
+		   * the enable bit is set again
+		   */
+		  # press the power button for 3 times;
+		  # cat ff_pwr_btn
+		  7	enabled
+		  # echo disable > ff_pwr_btn
+		  # press the power button for 3 times;
+		  # echo clear > ff_pwr_btn	/* clear the status bit */
+		  # echo disable > ff_pwr_btn
+		  # cat ff_pwr_btn
+		  7	enabled
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-dmi-entries linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-dmi-entries
index 210ad44b95a5..fe0289c87768 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-dmi-entries
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-dmi-entries
@@ -33,7 +33,7 @@ Description:
 		doesn't matter), they will be represented in sysfs as
 		entries "T-0" through "T-(N-1)":
 
-		Example entry directories:
+		Example entry directories::
 
 			/sys/firmware/dmi/entries/17-0
 			/sys/firmware/dmi/entries/17-1
@@ -50,61 +50,65 @@ Description:
 		Each DMI entry in sysfs has the common header values
 		exported as attributes:
 
-		handle	: The 16bit 'handle' that is assigned to this
+		========  =================================================
+		handle	  The 16bit 'handle' that is assigned to this
 			  entry by the firmware.  This handle may be
 			  referred to by other entries.
-		length	: The length of the entry, as presented in the
+		length	  The length of the entry, as presented in the
 			  entry itself.  Note that this is _not the
 			  total count of bytes associated with the
-			  entry_.  This value represents the length of
+			  entry.  This value represents the length of
 			  the "formatted" portion of the entry.  This
 			  "formatted" region is sometimes followed by
 			  the "unformatted" region composed of nul
 			  terminated strings, with termination signalled
 			  by a two nul characters in series.
-		raw	: The raw bytes of the entry. This includes the
+		raw	  The raw bytes of the entry. This includes the
 			  "formatted" portion of the entry, the
 			  "unformatted" strings portion of the entry,
 			  and the two terminating nul characters.
-		type	: The type of the entry.  This value is the same
+		type	  The type of the entry.  This value is the same
 			  as found in the directory name.  It indicates
 			  how the rest of the entry should be interpreted.
-		instance: The instance ordinal of the entry for the
+		instance  The instance ordinal of the entry for the
 			  given type.  This value is the same as found
 			  in the parent directory name.
-		position: The ordinal position (zero-based) of the entry
+		position  The ordinal position (zero-based) of the entry
 			  within the entirety of the DMI entry table.
+		========  =================================================
 
-		=== Entry Specialization ===
+		**Entry Specialization**
 
 		Some entry types may have other information available in
 		sysfs.  Not all types are specialized.
 
-		--- Type 15 - System Event Log ---
+		**Type 15 - System Event Log**
 
 		This entry allows the firmware to export a log of
 		events the system has taken.  This information is
 		typically backed by nvram, but the implementation
 		details are abstracted by this table.  This entry's data
-		is exported in the directory:
+		is exported in the directory::
 
-		/sys/firmware/dmi/entries/15-0/system_event_log
+		  /sys/firmware/dmi/entries/15-0/system_event_log
 
 		and has the following attributes (documented in the
 		SMBIOS / DMI specification under "System Event Log (Type 15)":
 
-		area_length
-		header_start_offset
-		data_start_offset
-		access_method
-		status
-		change_token
-		access_method_address
-		header_format
-		per_log_type_descriptor_length
-		type_descriptors_supported_count
+		- area_length
+		- header_start_offset
+		- data_start_offset
+		- access_method
+		- status
+		- change_token
+		- access_method_address
+		- header_format
+		- per_log_type_descriptor_length
+		- type_descriptors_supported_count
 
 		As well, the kernel exports the binary attribute:
 
-		raw_event_log	: The raw binary bits of the event log
+		=============	  ====================================
+		raw_event_log	  The raw binary bits of the event log
 				  as described by the DMI entry.
+		=============	  ====================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-efi-esrt linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-efi-esrt
index 6e431d1a4e79..31b57676d4ad 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-efi-esrt
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-efi-esrt
@@ -35,10 +35,13 @@ What:		/sys/firmware/efi/esrt/entries/entry$N/fw_type
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	What kind of firmware entry this is:
-		0 - Unknown
-		1 - System Firmware
-		2 - Device Firmware
-		3 - UEFI Driver
+
+		==  ===============
+		0   Unknown
+		1   System Firmware
+		2   Device Firmware
+		3   UEFI Driver
+		==  ===============
 
 What:		/sys/firmware/efi/esrt/entries/entry$N/fw_class
 Date:		February 2015
@@ -71,11 +74,14 @@ Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	The result of the last firmware update attempt for the
 		firmware resource entry.
-		0 - Success
-		1 - Insufficient resources
-		2 - Incorrect version
-		3 - Invalid format
-		4 - Authentication error
-		5 - AC power event
-		6 - Battery power event
+
+		==  ======================
+		0   Success
+		1   Insufficient resources
+		2   Incorrect version
+		3   Invalid format
+		4   Authentication error
+		5   AC power event
+		6   Battery power event
+		==  ======================
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
index c61b9b348e99..9c4d581be396 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
@@ -14,7 +14,7 @@ Description:	Switching efi runtime services to virtual mode requires
 		/sys/firmware/efi/runtime-map/ is the directory the kernel
 		exports that information in.
 
-		subdirectories are named with the number of the memory range:
+		subdirectories are named with the number of the memory range::
 
 			/sys/firmware/efi/runtime-map/0
 			/sys/firmware/efi/runtime-map/1
@@ -24,11 +24,13 @@ Description:	Switching efi runtime services to virtual mode requires
 
 		Each subdirectory contains five files:
 
-		attribute : The attributes of the memory range.
-		num_pages : The size of the memory range in pages.
-		phys_addr : The physical address of the memory range.
-		type      : The type of the memory range.
-		virt_addr : The virtual address of the memory range.
+		=========   =========================================
+		attribute   The attributes of the memory range.
+		num_pages   The size of the memory range in pages.
+		phys_addr   The physical address of the memory range.
+		type        The type of the memory range.
+		virt_addr   The virtual address of the memory range.
+		=========   =========================================
 
 		Above values are all hexadecimal numbers with the '0x' prefix.
 Users:		Kexec
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-gsmi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-gsmi
index 0faa0aaf4b6a..7a558354c1ee 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-gsmi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-gsmi
@@ -20,7 +20,7 @@ Description:
 
 			This directory has the same layout (and
 			underlying implementation as /sys/firmware/efi/vars.
-			See Documentation/ABI/*/sysfs-firmware-efi-vars
+			See `Documentation/ABI/*/sysfs-firmware-efi-vars`
 			for more information on how to interact with
 			this structure.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-memmap linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-memmap
index eca0d65087dc..1f6f4d3a32c0 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-memmap
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-memmap
@@ -20,7 +20,7 @@ Description:
 		the raw memory map to userspace.
 
 		The structure is as follows: Under /sys/firmware/memmap there
-		are subdirectories with the number of the entry as their name:
+		are subdirectories with the number of the entry as their name::
 
 			/sys/firmware/memmap/0
 			/sys/firmware/memmap/1
@@ -34,14 +34,16 @@ Description:
 
 		Each directory contains three files:
 
-		start	: The start address (as hexadecimal number with the
+		========  =====================================================
+		start	  The start address (as hexadecimal number with the
 			  '0x' prefix).
-		end	: The end address, inclusive (regardless whether the
+		end	  The end address, inclusive (regardless whether the
 			  firmware provides inclusive or exclusive ranges).
-		type	: Type of the entry as string. See below for a list of
+		type	  Type of the entry as string. See below for a list of
 			  valid types.
+		========  =====================================================
 
-		So, for example:
+		So, for example::
 
 			/sys/firmware/memmap/0/start
 			/sys/firmware/memmap/0/end
@@ -57,9 +59,8 @@ Description:
 		  - reserved
 
 		Following shell snippet can be used to display that memory
-		map in a human-readable format:
+		map in a human-readable format::
 
-		-------------------- 8< ----------------------------------------
 		  #!/bin/bash
 		  cd /sys/firmware/memmap
 		  for dir in * ; do
@@ -68,4 +69,3 @@ Description:
 		      type=$(cat $dir/type)
 		      printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
 		  done
-		-------------------- >8 ----------------------------------------
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
index 011dda4f8e8a..ee0d6dbc810e 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
@@ -15,7 +15,7 @@ Description:
 		to the fw_cfg device can be found in "docs/specs/fw_cfg.txt"
 		in the QEMU source tree.
 
-		=== SysFS fw_cfg Interface ===
+		**SysFS fw_cfg Interface**
 
 		The fw_cfg sysfs interface described in this document is only
 		intended to display discoverable blobs (i.e., those registered
@@ -31,7 +31,7 @@ Description:
 
 			/sys/firmware/qemu_fw_cfg/rev
 
-		--- Discoverable fw_cfg blobs by selector key ---
+		**Discoverable fw_cfg blobs by selector key**
 
 		All discoverable blobs listed in the fw_cfg file directory are
 		displayed as entries named after their unique selector key
@@ -45,24 +45,26 @@ Description:
 		Each such fw_cfg sysfs entry has the following values exported
 		as attributes:
 
-		name  	: The 56-byte nul-terminated ASCII string used as the
+		====	  ====================================================
+		name	  The 56-byte nul-terminated ASCII string used as the
 			  blob's 'file name' in the fw_cfg directory.
-		size  	: The length of the blob, as given in the fw_cfg
+		size	  The length of the blob, as given in the fw_cfg
 			  directory.
-		key	: The value of the blob's selector key as given in the
+		key	  The value of the blob's selector key as given in the
 			  fw_cfg directory. This value is the same as used in
 			  the parent directory name.
-		raw	: The raw bytes of the blob, obtained by selecting the
+		raw	  The raw bytes of the blob, obtained by selecting the
 			  entry via the control register, and reading a number
 			  of bytes equal to the blob size from the data
 			  register.
+		====	  ====================================================
 
-		--- Listing fw_cfg blobs by file name ---
+		**Listing fw_cfg blobs by file name**
 
 		While the fw_cfg device does not impose any specific naming
 		convention on the blobs registered in the file directory,
 		QEMU developers have traditionally used path name semantics
-		to give each blob a descriptive name. For example:
+		to give each blob a descriptive name. For example::
 
 			"bootorder"
 			"genroms/kvmvapic.bin"
@@ -81,7 +83,7 @@ Description:
 		of directories matching the path name components of fw_cfg
 		blob names, ending in symlinks to the by_key entry for each
 		"basename", as illustrated below (assume current directory is
-		/sys/firmware):
+		/sys/firmware)::
 
 		    qemu_fw_cfg/by_name/bootorder -> ../by_key/38
 		    qemu_fw_cfg/by_name/etc/e820 -> ../../by_key/35
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-sfi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-sfi
index 4be7d44aeacf..5210e0f06ddb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-sfi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-sfi
@@ -9,7 +9,7 @@ Description:
 		http://simplefirmware.org/documentation
 
 		While the tables are used by the kernel, user-space
-		can observe them this way:
+		can observe them this way::
 
-		# cd /sys/firmware/sfi/tables
-		# cat $TABLENAME > $TABLENAME.bin
+		  # cd /sys/firmware/sfi/tables
+		  # cat $TABLENAME > $TABLENAME.bin
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-sgi_uv linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-sgi_uv
index 4573fd4b7876..66800baab096 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-sgi_uv
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -5,7 +5,7 @@ Description:
 		The /sys/firmware/sgi_uv directory contains information
 		about the SGI UV platform.
 
-		Under that directory are a number of files:
+		Under that directory are a number of files::
 
 			partition_id
 			coherence_id
@@ -14,7 +14,7 @@ Description:
 		SGI UV systems can be partitioned into multiple physical
 		machines, which each partition running a unique copy
 		of the operating system.  Each partition will have a unique
-		partition id.  To display the partition id, use the command:
+		partition id.  To display the partition id, use the command::
 
 			cat /sys/firmware/sgi_uv/partition_id
 
@@ -22,6 +22,6 @@ Description:
 		A partitioned SGI UV system can have one or more coherence
 		domain.  The coherence id indicates which coherence domain
 		this partition is in.  To display the coherence id, use the
-		command:
+		command::
 
 			cat /sys/firmware/sgi_uv/coherence_id
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
index 15595fab88d1..b8631f5a29c4 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
@@ -2,21 +2,21 @@ What:		/sys/firmware/turris-mox-rwtm/board_version
 Date:		August 2019
 KernelVersion:	5.4
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) Board version burned into eFuses of this Turris Mox board.
+Description:	(Read) Board version burned into eFuses of this Turris Mox board.
 		Format: %i
 
 What:		/sys/firmware/turris-mox-rwtm/mac_address*
 Date:		August 2019
 KernelVersion:	5.4
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) MAC addresses burned into eFuses of this Turris Mox board.
+Description:	(Read) MAC addresses burned into eFuses of this Turris Mox board.
 		Format: %pM
 
 What:		/sys/firmware/turris-mox-rwtm/pubkey
 Date:		August 2019
 KernelVersion:	5.4
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) ECDSA public key (in pubkey hex compressed form) computed
+Description:	(Read) ECDSA public key (in pubkey hex compressed form) computed
 		as pair to the ECDSA private key burned into eFuses of this
 		Turris Mox Board.
 		Format: string
@@ -25,7 +25,7 @@ What:		/sys/firmware/turris-mox-rwtm/ram_size
 Date:		August 2019
 KernelVersion:	5.4
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) RAM size in MiB of this Turris Mox board as was detected
+Description:	(Read) RAM size in MiB of this Turris Mox board as was detected
 		during manufacturing and burned into eFuses. Can be 512 or 1024.
 		Format: %i
 
@@ -33,5 +33,5 @@ What:		/sys/firmware/turris-mox-rwtm/serial_number
 Date:		August 2019
 KernelVersion:	5.4
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) Serial number burned into eFuses of this Turris Mox device.
+Description:	(Read) Serial number burned into eFuses of this Turris Mox device.
 		Format: %016X
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-fs-ext4 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-fs-ext4
index 78604db56279..99e3d92f8299 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-fs-ext4
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-fs-ext4
@@ -45,8 +45,8 @@ Description:
 		parameter will have their blocks allocated out of a
 		block group specific preallocation pool, so that small
 		files are packed closely together.  Each large file
-		 will have its blocks allocated out of its own unique
-		 preallocation pool.
+		will have its blocks allocated out of its own unique
+		preallocation pool.
 
 What:		/sys/fs/ext4/<disk>/inode_readahead_blks
 Date:		March 2008
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index 7f730c4c8df2..67b3ed8e8c2f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -20,9 +20,13 @@ What:		/sys/fs/f2fs/<disk>/gc_idle
 Date:		July 2013
 Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
 Description:	Controls the victim selection policy for garbage collection.
-		Setting gc_idle = 0(default) will disable this option. Setting
-		gc_idle = 1 will select the Cost Benefit approach & setting
-		gc_idle = 2 will select the greedy approach.
+		Setting gc_idle = 0(default) will disable this option. Setting:
+
+		===========  ===============================================
+		gc_idle = 1  will select the Cost Benefit approach & setting
+		gc_idle = 2  will select the greedy approach & setting
+		gc_idle = 3  will select the age-threshold based approach.
+		===========  ===============================================
 
 What:		/sys/fs/f2fs/<disk>/reclaim_segments
 Date:		October 2013
@@ -45,10 +49,17 @@ Date:		November 2013
 Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
 Description:	Controls the in-place-update policy.
 		updates in f2fs. User can set:
-		0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR,
-		0x04: F2FS_IPU_UTIL,  0x08: F2FS_IPU_SSR_UTIL,
-		0x10: F2FS_IPU_FSYNC, 0x20: F2FS_IPU_ASYNC,
-		0x40: F2FS_IPU_NOCACHE.
+
+		====  =================
+		0x01  F2FS_IPU_FORCE
+		0x02  F2FS_IPU_SSR
+		0x04  F2FS_IPU_UTIL
+		0x08  F2FS_IPU_SSR_UTIL
+		0x10  F2FS_IPU_FSYNC
+		0x20  F2FS_IPU_ASYNC,
+		0x40  F2FS_IPU_NOCACHE
+		====  =================
+
 		Refer segment.h for details.
 
 What:		/sys/fs/f2fs/<disk>/min_ipu_util
@@ -331,18 +342,28 @@ Date:		April 2020
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:	Give a way to attach REQ_META|FUA to data writes
 		given temperature-based bits. Now the bits indicate:
-		*      REQ_META     |      REQ_FUA      |
-		*    5 |    4 |   3 |    2 |    1 |   0 |
-		* Cold | Warm | Hot | Cold | Warm | Hot |
+
+		+-------------------+-------------------+
+		|      REQ_META     |      REQ_FUA      |
+		+------+------+-----+------+------+-----+
+		|    5 |    4 |   3 |    2 |    1 |   0 |
+		+------+------+-----+------+------+-----+
+		| Cold | Warm | Hot | Cold | Warm | Hot |
+		+------+------+-----+------+------+-----+
 
 What:		/sys/fs/f2fs/<disk>/node_io_flag
 Date:		June 2020
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:	Give a way to attach REQ_META|FUA to node writes
 		given temperature-based bits. Now the bits indicate:
-		*      REQ_META     |      REQ_FUA      |
-		*    5 |    4 |   3 |    2 |    1 |   0 |
-		* Cold | Warm | Hot | Cold | Warm | Hot |
+
+		+-------------------+-------------------+
+		|      REQ_META     |      REQ_FUA      |
+		+------+------+-----+------+------+-----+
+		|    5 |    4 |   3 |    2 |    1 |   0 |
+		+------+------+-----+------+------+-----+
+		| Cold | Warm | Hot | Cold | Warm | Hot |
+		+------+------+-----+------+------+-----+
 
 What:		/sys/fs/f2fs/<disk>/iostat_period_ms
 Date:		April 2020
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-hypervisor-xen linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-hypervisor-xen
index 53b7b2ea7515..4dbe0c49b393 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-hypervisor-xen
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-hypervisor-xen
@@ -15,14 +15,17 @@ KernelVersion:	4.3
 Contact:	Boris Ostrovsky <boris.ostrovsky@oracle.com>
 Description:	If running under Xen:
 		Describes mode that Xen's performance-monitoring unit (PMU)
-		uses. Accepted values are
-			"off"  -- PMU is disabled
-			"self" -- The guest can profile itself
-			"hv"   -- The guest can profile itself and, if it is
+		uses. Accepted values are:
+
+			======    ============================================
+			"off"     PMU is disabled
+			"self"    The guest can profile itself
+			"hv"      The guest can profile itself and, if it is
 				  privileged (e.g. dom0), the hypervisor
-			"all" --  The guest can profile itself, the hypervisor
+			"all"     The guest can profile itself, the hypervisor
 				  and all other guests. Only available to
 				  privileged guests.
+			======    ============================================
 
 What:           /sys/hypervisor/pmu/pmu_features
 Date:           August 2015
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-boot_params linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-boot_params
index eca38ce2852d..7f9bda453c4d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-boot_params
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-boot_params
@@ -23,16 +23,17 @@ Description:	The /sys/kernel/boot_params directory contains two
 		representation of setup_data type. "data" file is the binary
 		representation of setup_data payload.
 
-		The whole boot_params directory structure is like below:
-		/sys/kernel/boot_params
-		|__ data
-		|__ setup_data
-		|   |__ 0
-		|   |   |__ data
-		|   |   |__ type
-		|   |__ 1
-		|       |__ data
-		|       |__ type
-		|__ version
+		The whole boot_params directory structure is like below::
+
+		  /sys/kernel/boot_params
+		  |__ data
+		  |__ setup_data
+		  |   |__ 0
+		  |   |   |__ data
+		  |   |   |__ type
+		  |   |__ 1
+		  |       |__ data
+		  |       |__ type
+		  |__ version
 
 Users:		Kexec
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-mm-hugepages linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
index fdaa2162fae1..294387e2c7fb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
@@ -7,9 +7,11 @@ Description:
 		of the hugepages supported by the kernel/CPU combination.
 
 		Under these directories are a number of files:
-			nr_hugepages
-			nr_overcommit_hugepages
-			free_hugepages
-			surplus_hugepages
-			resv_hugepages
+
+			- nr_hugepages
+			- nr_overcommit_hugepages
+			- free_hugepages
+			- surplus_hugepages
+			- resv_hugepages
+
 		See Documentation/admin-guide/mm/hugetlbpage.rst for details.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-mm-ksm linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-mm-ksm
index dfc13244cda3..1c9bed5595f5 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-mm-ksm
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-mm-ksm
@@ -34,8 +34,9 @@ Description:	Kernel Samepage Merging daemon sysfs interface
 		in a tree.
 
 		run: write 0 to disable ksm, read 0 while ksm is disabled.
-			write 1 to run ksm, read 1 while ksm is running.
-			write 2 to disable ksm and unmerge all its pages.
+
+			- write 1 to run ksm, read 1 while ksm is running.
+			- write 2 to disable ksm and unmerge all its pages.
 
 		sleep_millisecs: how many milliseconds ksm should sleep between
 		scans.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-slab linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-slab
index ed35833ad7f0..c9f12baf8baa 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-kernel-slab
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-kernel-slab
@@ -346,6 +346,7 @@ Description:
 		number of objects per slab.  If a slab cannot be allocated
 		because of fragmentation, SLUB will retry with the minimum order
 		possible depending on its characteristics.
+
 		When debug_guardpage_minorder=N (N > 0) parameter is specified
 		(see Documentation/admin-guide/kernel-parameters.rst), the minimum possible
 		order is used and this sysfs entry can not be used to change
@@ -361,6 +362,7 @@ Description:
 		new slab has not been possible at the cache's order and instead
 		fallen back to its minimum possible order.  It can be written to
 		clear the current count.
+
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/partial
@@ -410,6 +412,7 @@ Description:
 		slab from a remote node as opposed to allocating a new slab on
 		the local node.  This reduces the amount of wasted memory over
 		the entire system but can be expensive.
+
 		Available when CONFIG_NUMA is enabled.
 
 What:		/sys/kernel/slab/cache/sanity_checks
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-module linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-module
index 0aac02e7fb0e..353c0db5bc1f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-module
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-module
@@ -17,14 +17,15 @@ KernelVersion:	3.1
 Contact:	Kirill Smelkov <kirr@mns.spb.ru>
 Description:	Maximum time allowed for periodic transfers per microframe (μs)
 
-		[ USB 2.0 sets maximum allowed time for periodic transfers per
+		Note:
+		  USB 2.0 sets maximum allowed time for periodic transfers per
 		  microframe to be 80%, that is 100 microseconds out of 125
 		  microseconds (full microframe).
 
 		  However there are cases, when 80% max isochronous bandwidth is
 		  too limiting. For example two video streams could require 110
 		  microseconds of isochronous bandwidth per microframe to work
-		  together. ]
+		  together. 
 
 		Through this setting it is possible to raise the limit so that
 		the host controller would allow allocating more than 100
@@ -45,8 +46,10 @@ Date:		Jan 2012
 KernelVersion:»·3.3
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:	Module taint flags:
-			P - proprietary module
-			O - out-of-tree module
-			F - force-loaded module
-			C - staging driver module
-			E - unsigned module
+			==  =====================
+			P   proprietary module
+			O   out-of-tree module
+			F   force-loaded module
+			C   staging driver module
+			E   unsigned module
+			==  =====================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-asus-laptop linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 8b0e8205a6a2..c78d358dbdbe 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -4,13 +4,16 @@ KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		This file allows display switching. The value
-		is composed by 4 bits and defined as follow:
-		4321
-		|||`- LCD
-		||`-- CRT
-		|`--- TV
-		`---- DVI
-		Ex: - 0 (0000b) means no display
+		is composed by 4 bits and defined as follow::
+
+		  4321
+		  |||`- LCD
+		  ||`-- CRT
+		  |`--- TV
+		  `---- DVI
+
+		Ex:
+		    - 0 (0000b) means no display
 		    - 3 (0011b) CRT+LCD.
 
 What:		/sys/devices/platform/asus_laptop/gps
@@ -28,8 +31,10 @@ Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Some models like the W1N have a LED display that can be
 		used to display several items of information.
-		To control the LED display, use the following :
+		To control the LED display, use the following::
+
 		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
+
 		where T control the 3 letters display, and DDD the 3 digits display.
 		The DDD table can be found in Documentation/admin-guide/laptops/asus-laptop.rst
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi
index 1efac0ddb417..04885738cf15 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -5,6 +5,7 @@ Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Change CPU clock configuration (write-only).
 		There are three available clock configuration:
+
 		    * 0 -> Super Performance Mode
 		    * 1 -> High Performance Mode
 		    * 2 -> Power Saving Mode
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-at91 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-at91
index 4cc6a865ae66..b146be74b8e0 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-at91
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-at91
@@ -18,8 +18,10 @@ Description:
 		In order to use an extended can_id add the
 		CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
 
-		- standard id 0x7ff:
-		echo 0x7ff      > /sys/class/net/can0/mb0_id
+		- standard id 0x7ff::
 
-		- extended id 0x1fffffff:
-		echo 0x9fffffff > /sys/class/net/can0/mb0_id
+		    echo 0x7ff      > /sys/class/net/can0/mb0_id
+
+		- extended id 0x1fffffff::
+
+		    echo 0x9fffffff > /sys/class/net/can0/mb0_id
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dell-laptop linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dell-laptop
index 9b917c7453de..82bcfe9df66e 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dell-laptop
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dell-laptop
@@ -34,9 +34,12 @@ Description:
 		this file. To disable a trigger, write its name preceded
 		by '-' instead.
 
-		For example, to enable the keyboard as trigger run:
+		For example, to enable the keyboard as trigger run::
+
 		    echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-		To disable it:
+
+		To disable it::
+
 		    echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
 
 		Note that not all the available triggers can be configured.
@@ -57,7 +60,8 @@ Description:
 		with any the above units. If no unit is specified, the value
 		is assumed to be expressed in seconds.
 
-		For example, to set the timeout to 10 minutes run:
+		For example, to set the timeout to 10 minutes run::
+
 		    echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
 
 		Note that when this file is read, the returned value might be
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dell-smbios linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dell-smbios
index 205d3b6361e0..e6e0f7f834a7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dell-smbios
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dell-smbios
@@ -13,8 +13,8 @@ Description:
 		For example the token ID "5" would be available
 		as the following attributes:
 
-		0005_location
-		0005_value
+		- 0005_location
+		- 0005_value
 
 		Tokens will vary from machine to machine, and
 		only tokens available on that machine will be
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dfl-fme linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dfl-fme
index 3683cb1cdc3d..d6ab34e81b9b 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dfl-fme
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dfl-fme
@@ -113,8 +113,11 @@ KernelVersion:	5.5
 Contact:	Wu Hao <hao.wu@intel.com>
 Description:	Read-Only. Read this file to get the name of hwmon device, it
 		supports values:
-		    'dfl_fme_thermal' - thermal hwmon device name
-		    'dfl_fme_power'   - power hwmon device name
+
+		=================  =========================
+		'dfl_fme_thermal'  thermal hwmon device name
+		'dfl_fme_power'    power hwmon device name
+		=================  =========================
 
 What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
 Date:		October 2019
@@ -169,8 +172,11 @@ KernelVersion:	5.5
 Contact:	Wu Hao <hao.wu@intel.com>
 Description:	Read-Only. Read this file to get the policy of hardware threshold1
 		(see 'temp1_max'). It only supports two values (policies):
-		    0 - AP2 state (90% throttling)
-		    1 - AP1 state (50% throttling)
+
+		==  ==========================
+		 0  AP2 state (90% throttling)
+	         1  AP1 state (50% throttling)
+		==  ==========================
 
 What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
 Date:		October 2019
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dptf linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dptf
index eeed81ca6949..141834342a4d 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-dptf
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-dptf
@@ -27,12 +27,15 @@ KernelVersion:	v4.10
 Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RO) Display the platform power source
+
+		========= ============================
 		bits[3:0] Current power source
-			0x00 = DC
-			0x01 = AC
-			0x02 = USB
-			0x03 = Wireless Charger
+			  - 0x00 = DC
+			  - 0x01 = AC
+			  - 0x02 = USB
+			  - 0x03 = Wireless Charger
 		bits[7:4] Power source sequence number
+		========= ============================
 
 What:		/sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power
 Date:		Jul, 2016
@@ -92,3 +95,19 @@ Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RO) The battery discharge current capability obtained from battery fuel gauge in
 		milli Amps.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_low_clock
+Date:		November, 2020
+KernelVersion:	v5.10
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+		when FIVR clock is 19.2MHz or 24MHz.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_high_clock
+Date:		November, 2020
+KernelVersion:	v5.10
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+		when FIVR clock is 38.4MHz.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-eeepc-laptop linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
index 5b026c69587a..70dbe0733cf6 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
@@ -4,9 +4,11 @@ KernelVersion:	2.6.26
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		This file allows display switching.
+
 		- 1 = LCD
 		- 2 = CRT
 		- 3 = LCD+CRT
+
 		If you run X11, you should use xrandr instead.
 
 What:		/sys/devices/platform/eeepc/camera
@@ -30,16 +32,20 @@ Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Change CPU clock configuration.
 		On the Eee PC 1000H there are three available clock configuration:
+
 		    * 0 -> Super Performance Mode
 		    * 1 -> High Performance Mode
 		    * 2 -> Power Saving Mode
+
 		On Eee PC 701 there is only 2 available clock configurations.
 		Available configuration are listed in available_cpufv file.
 		Reading this file will show the raw hexadecimal value which
-		is defined as follow:
-		| 8 bit | 8 bit |
-		    |       `---- Current mode
-		    `------------ Availables modes
+		is defined as follow::
+
+		  | 8 bit | 8 bit |
+		      |       `---- Current mode
+		      `------------ Availables modes
+
 		For example, 0x301 means: mode 1 selected, 3 available modes.
 
 What:		/sys/devices/platform/eeepc/available_cpufv
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
index c394b808be19..b6a138b50d99 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
@@ -5,9 +5,9 @@ Contact:	Wolfram Sang <wsa+renesas@sang-engineering.com>
 Description:
 		Reading the file will give you a list of masters which can be
 		selected for a demultiplexed bus. The format is
-		"<index>:<name>". Example from a Renesas Lager board:
+		"<index>:<name>". Example from a Renesas Lager board::
 
-		0:/i2c@e6500000 1:/i2c@e6508000
+		  0:/i2c@e6500000 1:/i2c@e6508000
 
 What:		/sys/devices/platform/<i2c-demux-name>/current_master
 Date:		January 2016
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-ideapad-laptop linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
index 1b31be3f996a..fd2ac02bc5bd 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
@@ -12,6 +12,7 @@ Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
 Description:
 		Change fan mode
 		There are four available modes:
+
 			* 0 -> Super Silent Mode
 			* 1 -> Standard Mode
 			* 2 -> Dust Cleaning
@@ -32,9 +33,11 @@ KernelVersion:	4.18
 Contact:	"Oleg Keri <ezhi99@gmail.com>"
 Description:
 		Control fn-lock mode.
+
 			* 1 -> Switched On
 			* 0 -> Switched Off
 
-		For example:
-		# echo "0" >	\
-		/sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock
+		For example::
+
+		  # echo "0" >	\
+		  /sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
index 5aa618987cad..02ae1e9bbfc8 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
@@ -8,5 +8,6 @@ Description:
 		of 0 and userspace can signal SBL to update firmware,
 		on next reboot, by writing a value of 1.
 		There are two available states:
+
 		    * 0 -> Skip firmware update while rebooting
 		    * 1 -> Attempt firmware update on next reboot
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt
index 8af65059d519..e19144fd5d86 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt
@@ -7,5 +7,6 @@ Description:
 		Thunderbolt controllers to turn on or off when no
 		devices are connected (write-only)
 		There are two available states:
+
 		    * 0 -> Force power disabled
 		    * 1 -> Force power enabled
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-kim linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-kim
index c1653271872a..a7f81de68046 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-kim
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-kim
@@ -5,6 +5,7 @@ Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
 Description:
 		Name of the UART device at which the WL128x chip
 		is connected. example: "/dev/ttyS0".
+
 		The device name flows down to architecture specific board
 		initialization file from the SFI/ATAGS bootloader
 		firmware. The name exposed is read from the user-space
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
index 401d202f478b..e79ca22e2f45 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
@@ -5,10 +5,13 @@ Contact:	"Liming Sun <lsun@mellanox.com>"
 Description:
 		The Life-cycle state of the SoC, which could be one of the
 		following values.
-		  Production - Production state and can be updated to secure
-		  GA Secured - Secure chip and not able to change state
-		  GA Non-Secured - Non-Secure chip and not able to change state
-		  RMA - Return Merchandise Authorization
+
+		==============  =============================================
+		Production      Production state and can be updated to secure
+		GA Secured      Secure chip and not able to change state
+		GA Non-Secured  Non-Secure chip and not able to change state
+		RMA             Return Merchandise Authorization
+		==============  =============================================
 
 What:		/sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog
 Date:		Oct 2019
@@ -25,10 +28,13 @@ KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
 Description:
 		The source of the boot stream for the next reset. It could be
-		one of the following values.
-		  external - boot from external source (USB or PCIe)
-		  emmc - boot from the onchip eMMC
-		  emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
+		one of the following values:
+
+		===========  ===============================================
+		external     boot from external source (USB or PCIe)
+		emmc         boot from the onchip eMMC
+		emmc_legacy  boot from the onchip eMMC in legacy (slow) mode
+		===========  ===============================================
 
 What:		/sys/bus/platform/devices/MLNXBF04:00/second_reset_action
 Date:		Oct 2019
@@ -38,11 +44,14 @@ Description:
 		Update the source of the boot stream after next reset. It could
 		be one of the following values and will be applied after next
 		reset.
-		  external - boot from external source (USB or PCIe)
-		  emmc - boot from the onchip eMMC
-		  emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
-		  swap_emmc - swap the primary / secondary boot partition
-		  none - cancel the action
+
+		===========  ===============================================
+		external     boot from external source (USB or PCIe)
+		emmc         boot from the onchip eMMC
+		emmc_legacy  boot from the onchip eMMC in legacy (slow) mode
+		swap_emmc    swap the primary / secondary boot partition
+		none         cancel the action
+		===========  ===============================================
 
 What:		/sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state
 Date:		Oct 2019
@@ -50,9 +59,12 @@ KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
 Description:
 		The state of eFuse versions with the following values.
-		  InUse - burnt, valid and currently in use
-		  Used - burnt and valid
-		  Free - not burnt and free to use
-		  Skipped - not burnt but not free (skipped)
-		  Wasted - burnt and invalid
-		  Invalid - not burnt but marked as valid (error state).
+
+		=======  ===============================================
+		InUse    burnt, valid and currently in use
+		Used     burnt and valid
+		Free     not burnt and free to use
+		Skipped  not burnt but not free (skipped)
+		Wasted   burnt and invalid
+		Invalid  not burnt but marked as valid (error state).
+		=======  ===============================================
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
index 6212697bbf6f..bc510ccc37a7 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
@@ -7,9 +7,11 @@ Description:
 		The file can show/change the phy mode for role swap of usb.
 
 		Write the following strings to change the mode:
-		 "host" - switching mode from peripheral to host.
-		 "peripheral" - switching mode from host to peripheral.
+
+		 - "host" - switching mode from peripheral to host.
+		 - "peripheral" - switching mode from host to peripheral.
 
 		Read the file, then it shows the following strings:
-		 "host" - The mode is host now.
-		 "peripheral" - The mode is peripheral now.
+
+		 - "host" - The mode is host now.
+		 - "peripheral" - The mode is peripheral now.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-renesas_usb3 linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-renesas_usb3
index 5621c15d5dc0..8af5b9c3fabb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-renesas_usb3
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-renesas_usb3
@@ -7,9 +7,11 @@ Description:
 		The file can show/change the drd mode of usb.
 
 		Write the following string to change the mode:
-		 "host" - switching mode from peripheral to host.
-		 "peripheral" - switching mode from host to peripheral.
+
+		- "host" - switching mode from peripheral to host.
+		- "peripheral" - switching mode from host to peripheral.
 
 		Read the file, then it shows the following strings:
-		 "host" - The mode is host now.
-		 "peripheral" - The mode is peripheral now.
+		
+		- "host" - The mode is host now.
+		- "peripheral" - The mode is peripheral now.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-sst-atom linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-sst-atom
index 0d07c0395660..d5f6e21f0e42 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-sst-atom
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-sst-atom
@@ -5,13 +5,22 @@ Contact:	"Sebastien Guiriec" <sebastien.guiriec@intel.com>
 Description:
 		LPE Firmware version for SST driver on all atom
 		plaforms (BYT/CHT/Merrifield/BSW).
-		If the FW has never been loaded it will display:
+		If the FW has never been loaded it will display::
+
 			"FW not yet loaded"
-		If FW has been loaded it will display:
+
+		If FW has been loaded it will display::
+
 			"v01.aa.bb.cc"
+
 		aa: Major version is reflecting SoC version:
+
+			=== =============
 			0d: BYT FW
 			0b: BSW FW
 			07: Merrifield FW
+			=== =============
+
 		bb: Minor version
+
 		cc: Build version
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-usbip-vudc linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-usbip-vudc
index 81fcfb454913..53622d3ba27c 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-usbip-vudc
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-usbip-vudc
@@ -16,10 +16,13 @@ Contact:	Krzysztof Opasiak <k.opasiak@samsung.com>
 Description:
 		Current status of the device.
 		Allowed values:
-		1 - Device is available and can be exported
-		2 - Device is currently exported
-		3 - Fatal error occurred during communication
-		  with peer
+
+		==  ==========================================
+		1   Device is available and can be exported
+		2   Device is currently exported
+		3   Fatal error occurred during communication
+		    with peer
+		==  ==========================================
 
 What:		/sys/devices/platform/usbip-vudc.%d/usbip_sockfd
 Date:		April 2016
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-wilco-ec linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-wilco-ec
index 5f60b184a5a5..4439d0644091 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-platform-wilco-ec
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-platform-wilco-ec
@@ -39,6 +39,7 @@ Description:
                which affects charging via the special USB PowerShare port
                (marked with a small lightning bolt or battery icon) when in
                low power states:
+
                - In S0, the port will always provide power.
                - In S0ix, if usb_charge is enabled, then power will be
                  supplied to the port when on AC or if battery is > 50%.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-power linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-power
index 5e6ead29124c..51c0f578bfce 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-power
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-power
@@ -47,14 +47,18 @@ Description:
 		suspend-to-disk mechanism.  Reading from this file returns
 		the name of the method by which the system will be put to
 		sleep on the next suspend.  There are four methods supported:
+
 		'firmware' - means that the memory image will be saved to disk
 		by some firmware, in which case we also assume that the
 		firmware will handle the system suspend.
+
 		'platform' - the memory image will be saved by the kernel and
 		the system will be put to sleep by the platform driver (e.g.
 		ACPI or other PM registers).
+
 		'shutdown' - the memory image will be saved by the kernel and
 		the system will be powered off.
+
 		'reboot' - the memory image will be saved by the kernel and
 		the system will be rebooted.
 
@@ -74,12 +78,12 @@ Description:
 		The suspend-to-disk method may be chosen by writing to this
 		file one of the accepted strings:
 
-		'firmware'
-		'platform'
-		'shutdown'
-		'reboot'
-		'testproc'
-		'test'
+		- 'firmware'
+		- 'platform'
+		- 'shutdown'
+		- 'reboot'
+		- 'testproc'
+		- 'test'
 
 		It will only change to 'firmware' or 'platform' if the system
 		supports that.
@@ -114,9 +118,9 @@ Description:
 		string representing a nonzero integer into it.
 
 		To use this debugging feature you should attempt to suspend
-		the machine, then reboot it and run
+		the machine, then reboot it and run::
 
-		dmesg -s 1000000 | grep 'hash matches'
+		  dmesg -s 1000000 | grep 'hash matches'
 
 		If you do not get any matches (or they appear to be false
 		positives), it is possible that the last PM event point
@@ -244,6 +248,7 @@ Description:
 		wakeup sources created with the help of /sys/power/wake_lock.
 		When a string is written to /sys/power/wake_unlock, it will be
 		assumed to represent the name of a wakeup source to deactivate.
+
 		If a wakeup source object of that name exists and is active at
 		the moment, it will be deactivated.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-profiling linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-profiling
index 8a8e466eb2c0..e39dd3a0ceef 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-profiling
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-profiling
@@ -5,7 +5,7 @@ Description:
 		/sys/kernel/profiling is the runtime equivalent
 		of the boot-time profile= option.
 
-		You can get the same effect running:
+		You can get the same effect running::
 
 			echo 2 > /sys/kernel/profiling
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-ptp linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-ptp
index a17f817a9309..2363ad810ddb 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-ptp
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-ptp
@@ -69,7 +69,7 @@ Description:
 		pin offered by the PTP hardware clock. The file name
 		is the hardware dependent pin name. Reading from this
 		file produces two numbers, the assigned function (see
-		the PTP_PF_ enumeration values in linux/ptp_clock.h)
+		the `PTP_PF_` enumeration values in linux/ptp_clock.h)
 		and the channel number. The function and channel
 		assignment may be changed by two writing numbers into
 		the file.
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-uevent linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-uevent
index aa39f8d7bcdf..0b6227706b35 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-uevent
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-uevent
@@ -6,42 +6,46 @@ Description:
                 Enable passing additional variables for synthetic uevents that
                 are generated by writing /sys/.../uevent file.
 
-                Recognized extended format is ACTION [UUID [KEY=VALUE ...].
+                Recognized extended format is::
 
-                The ACTION is compulsory - it is the name of the uevent action
-                ("add", "change", "remove"). There is no change compared to
-                previous functionality here. The rest of the extended format
-                is optional.
+			ACTION [UUID [KEY=VALUE ...]
+
+                The ACTION is compulsory - it is the name of the uevent
+                action (``add``, ``change``, ``remove``). There is no change
+                compared to previous functionality here. The rest of the
+                extended format is optional.
 
                 You need to pass UUID first before any KEY=VALUE pairs.
-                The UUID must be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+                The UUID must be in ``xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx``
                 format where 'x' is a hex digit. The UUID is considered to be
                 a transaction identifier so it's possible to use the same UUID
                 value for one or more synthetic uevents in which case we
                 logically group these uevents together for any userspace
                 listeners. The UUID value appears in uevent as
-                "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment
+                ``SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx`` environment
                 variable.
 
                 If UUID is not passed in, the generated synthetic uevent gains
-                "SYNTH_UUID=0" environment variable automatically.
+                ``SYNTH_UUID=0`` environment variable automatically.
 
                 The KEY=VALUE pairs can contain alphanumeric characters only.
+
                 It's possible to define zero or more pairs - each pair is then
                 delimited by a space character ' '. Each pair appears in
-                synthetic uevent as "SYNTH_ARG_KEY=VALUE". That means the KEY
-                name gains "SYNTH_ARG_" prefix to avoid possible collisions
+                synthetic uevent as ``SYNTH_ARG_KEY=VALUE``. That means the KEY
+                name gains ``SYNTH_ARG_`` prefix to avoid possible collisions
                 with existing variables.
 
-                Example of valid sequence written to the uevent file:
+                Example of valid sequence written to the uevent file::
 
                     add fe4d7c9d-b8c6-4a70-9ef1-3d8a58d18eed A=1 B=abc
 
-                This generates synthetic uevent including these variables:
+                This generates synthetic uevent including these variables::
 
                     ACTION=add
                     SYNTH_ARG_A=1
                     SYNTH_ARG_B=abc
                     SYNTH_UUID=fe4d7c9d-b8c6-4a70-9ef1-3d8a58d18eed
+
 Users:
                 udev, userspace tools generating synthetic uevents
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-wusb_cbaf linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-wusb_cbaf
index a99c5f86a37a..2969d3694ec0 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/sysfs-wusb_cbaf
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/sysfs-wusb_cbaf
@@ -45,7 +45,8 @@ Description:
                 7. Device is unplugged.
 
                 References:
-                  [WUSB-AM] Association Models Supplement to the
+                  [WUSB-AM]
+			    Association Models Supplement to the
                             Certified Wireless Universal Serial Bus
                             Specification, version 1.0.
 
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/usb-charger-uevent linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/usb-charger-uevent
index 419a92dd0d86..1db89b0cf80f 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/usb-charger-uevent
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/usb-charger-uevent
@@ -3,44 +3,52 @@ Date:		2020-01-14
 KernelVersion:	5.6
 Contact:	linux-usb@vger.kernel.org
 Description:	There are two USB charger states:
-		USB_CHARGER_ABSENT
-		USB_CHARGER_PRESENT
+
+		- USB_CHARGER_ABSENT
+		- USB_CHARGER_PRESENT
+
 		There are five USB charger types:
-		USB_CHARGER_UNKNOWN_TYPE: Charger type is unknown
-		USB_CHARGER_SDP_TYPE: Standard Downstream Port
-		USB_CHARGER_CDP_TYPE: Charging Downstream Port
-		USB_CHARGER_DCP_TYPE: Dedicated Charging Port
-		USB_CHARGER_ACA_TYPE: Accessory Charging Adapter
+
+		========================  ==========================
+		USB_CHARGER_UNKNOWN_TYPE  Charger type is unknown
+		USB_CHARGER_SDP_TYPE      Standard Downstream Port
+		USB_CHARGER_CDP_TYPE      Charging Downstream Port
+		USB_CHARGER_DCP_TYPE      Dedicated Charging Port
+		USB_CHARGER_ACA_TYPE      Accessory Charging Adapter
+		========================  ==========================
+
 		https://www.usb.org/document-library/battery-charging-v12-spec-and-adopters-agreement
 
-		Here are two examples taken using udevadm monitor -p when
-		USB charger is online:
-		UDEV  change   /devices/soc0/usbphynop1 (platform)
-		ACTION=change
-		DEVPATH=/devices/soc0/usbphynop1
-		DRIVER=usb_phy_generic
-		MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
-		OF_COMPATIBLE_0=usb-nop-xceiv
-		OF_COMPATIBLE_N=1
-		OF_FULLNAME=/usbphynop1
-		OF_NAME=usbphynop1
-		SEQNUM=2493
-		SUBSYSTEM=platform
-		USB_CHARGER_STATE=USB_CHARGER_PRESENT
-		USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE
-		USEC_INITIALIZED=227422826
-
-		USB charger is offline:
-		KERNEL change   /devices/soc0/usbphynop1 (platform)
-		ACTION=change
-		DEVPATH=/devices/soc0/usbphynop1
-		DRIVER=usb_phy_generic
-		MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
-		OF_COMPATIBLE_0=usb-nop-xceiv
-		OF_COMPATIBLE_N=1
-		OF_FULLNAME=/usbphynop1
-		OF_NAME=usbphynop1
-		SEQNUM=2494
-		SUBSYSTEM=platform
-		USB_CHARGER_STATE=USB_CHARGER_ABSENT
-		USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE
+		Here are two examples taken using ``udevadm monitor -p`` when
+		USB charger is online::
+
+		    UDEV  change   /devices/soc0/usbphynop1 (platform)
+		    ACTION=change
+		    DEVPATH=/devices/soc0/usbphynop1
+		    DRIVER=usb_phy_generic
+		    MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
+		    OF_COMPATIBLE_0=usb-nop-xceiv
+		    OF_COMPATIBLE_N=1
+		    OF_FULLNAME=/usbphynop1
+		    OF_NAME=usbphynop1
+		    SEQNUM=2493
+		    SUBSYSTEM=platform
+		    USB_CHARGER_STATE=USB_CHARGER_PRESENT
+		    USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE
+		    USEC_INITIALIZED=227422826
+
+		USB charger is offline::
+
+		    KERNEL change   /devices/soc0/usbphynop1 (platform)
+		    ACTION=change
+		    DEVPATH=/devices/soc0/usbphynop1
+		    DRIVER=usb_phy_generic
+		    MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
+		    OF_COMPATIBLE_0=usb-nop-xceiv
+		    OF_COMPATIBLE_N=1
+		    OF_FULLNAME=/usbphynop1
+		    OF_NAME=usbphynop1
+		    SEQNUM=2494
+		    SUBSYSTEM=platform
+		    USB_CHARGER_STATE=USB_CHARGER_ABSENT
+		    USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE
diff --git linux-libre-5.9-gnu/Documentation/ABI/testing/usb-uevent linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/usb-uevent
index d35c3cad892c..2b8eca4bf2b1 100644
--- linux-libre-5.9-gnu/Documentation/ABI/testing/usb-uevent
+++ linux-libre-5.10-rc7-gnu/Documentation/ABI/testing/usb-uevent
@@ -6,22 +6,22 @@ Description:	When the USB Host Controller has entered a state where it is no
 		longer functional a uevent will be raised. The uevent will
 		contain ACTION=offline and ERROR=DEAD.
 
-		Here is an example taken using udevadm monitor -p:
+		Here is an example taken using udevadm monitor -p::
 
-		KERNEL[130.428945] offline  /devices/pci0000:00/0000:00:10.0/usb2 (usb)
-		ACTION=offline
-		BUSNUM=002
-		DEVNAME=/dev/bus/usb/002/001
-		DEVNUM=001
-		DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2
-		DEVTYPE=usb_device
-		DRIVER=usb
-		ERROR=DEAD
-		MAJOR=189
-		MINOR=128
-		PRODUCT=1d6b/2/414
-		SEQNUM=2168
-		SUBSYSTEM=usb
-		TYPE=9/0/1
+		    KERNEL[130.428945] offline  /devices/pci0000:00/0000:00:10.0/usb2 (usb)
+		    ACTION=offline
+		    BUSNUM=002
+		    DEVNAME=/dev/bus/usb/002/001
+		    DEVNUM=001
+		    DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2
+		    DEVTYPE=usb_device
+		    DRIVER=usb
+		    ERROR=DEAD
+		    MAJOR=189
+		    MINOR=128
+		    PRODUCT=1d6b/2/414
+		    SEQNUM=2168
+		    SUBSYSTEM=usb
+		    TYPE=9/0/1
 
 Users:		chromium-os-dev@chromium.org
diff --git linux-libre-5.9-gnu/Documentation/Kconfig linux-libre-5.10-rc7-gnu/Documentation/Kconfig
index 66046fa1c341..e549a61f4d96 100644
--- linux-libre-5.9-gnu/Documentation/Kconfig
+++ linux-libre-5.10-rc7-gnu/Documentation/Kconfig
@@ -10,4 +10,14 @@ config WARN_MISSING_DOCUMENTS
 
 	   If unsure, select 'N'.
 
+config WARN_ABI_ERRORS
+	bool "Warn if there are errors at ABI files"
+	depends on COMPILE_TEST
+	help
+	   The files under Documentation/ABI should follow what's
+	   described at Documentation/ABI/README. Yet, as they're manually
+	   written, it would be possible that some of those files would
+	   have errors that would break them for being parsed by
+	   scripts/get_abi.pl. Add a check to verify them.
 
+	   If unsure, select 'N'.
diff --git linux-libre-5.9-gnu/Documentation/Makefile linux-libre-5.10-rc7-gnu/Documentation/Makefile
index 6b12dd82f712..61a7310b49e0 100644
--- linux-libre-5.9-gnu/Documentation/Makefile
+++ linux-libre-5.10-rc7-gnu/Documentation/Makefile
@@ -10,6 +10,11 @@ ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y)
 $(shell $(srctree)/scripts/documentation-file-ref-check --warn)
 endif
 
+# Check for broken ABI files
+ifeq ($(CONFIG_WARN_ABI_ERRORS),y)
+$(shell $(srctree)/scripts/get_abi.pl validate --dir $(srctree)/Documentation/ABI)
+endif
+
 # You can set these variables from the command line.
 SPHINXBUILD   = sphinx-build
 SPHINXOPTS    =
@@ -21,6 +26,10 @@ BUILDDIR      = $(obj)/output
 PDFLATEX      = xelatex
 LATEXOPTS     = -interaction=batchmode
 
+ifeq ($(KBUILD_VERBOSE),0)
+SPHINXOPTS    += "-q"
+endif
+
 # User-friendly check for sphinx-build
 HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
 
diff --git linux-libre-5.9-gnu/Documentation/PCI/index.rst linux-libre-5.10-rc7-gnu/Documentation/PCI/index.rst
index 8f66feaafd4f..c17c87af1968 100644
--- linux-libre-5.9-gnu/Documentation/PCI/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/PCI/index.rst
@@ -12,6 +12,7 @@ Linux PCI Bus Subsystem
    pciebus-howto
    pci-iov-howto
    msi-howto
+   sysfs-pci
    acpi-info
    pci-error-recovery
    pcieaer-howto
diff --git linux-libre-5.9-gnu/Documentation/filesystems/sysfs-pci.rst linux-libre-5.10-rc7-gnu/Documentation/PCI/sysfs-pci.rst
similarity index 100%
rename from Documentation/filesystems/sysfs-pci.rst
rename to Documentation/PCI/sysfs-pci.rst
diff --git linux-libre-5.9-gnu/Documentation/RCU/Design/Data-Structures/Data-Structures.rst linux-libre-5.10-rc7-gnu/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
index 4a48e20a46f2..f4efd6897b09 100644
--- linux-libre-5.9-gnu/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
@@ -963,7 +963,7 @@ exit and perhaps also vice versa. Therefore, whenever the
 ``->dynticks_nesting`` field is incremented up from zero, the
 ``->dynticks_nmi_nesting`` field is set to a large positive number, and
 whenever the ``->dynticks_nesting`` field is decremented down to zero,
-the the ``->dynticks_nmi_nesting`` field is set to zero. Assuming that
+the ``->dynticks_nmi_nesting`` field is set to zero. Assuming that
 the number of misnested interrupts is not sufficient to overflow the
 counter, this approach corrects the ``->dynticks_nmi_nesting`` field
 every time the corresponding CPU enters the idle loop from process
diff --git linux-libre-5.9-gnu/Documentation/RCU/Design/Requirements/Requirements.rst linux-libre-5.10-rc7-gnu/Documentation/RCU/Design/Requirements/Requirements.rst
index 8f41ad0aa753..1ae79a10a8de 100644
--- linux-libre-5.9-gnu/Documentation/RCU/Design/Requirements/Requirements.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -2162,7 +2162,7 @@ scheduling-clock interrupt be enabled when RCU needs it to be:
    this sort of thing.
 #. If a CPU is in a portion of the kernel that is absolutely positively
    no-joking guaranteed to never execute any RCU read-side critical
-   sections, and RCU believes this CPU to to be idle, no problem. This
+   sections, and RCU believes this CPU to be idle, no problem. This
    sort of thing is used by some architectures for light-weight
    exception handlers, which can then avoid the overhead of
    ``rcu_irq_enter()`` and ``rcu_irq_exit()`` at exception entry and
@@ -2431,7 +2431,7 @@ However, there are legitimate preemptible-RCU implementations that do
 not have this property, given that any point in the code outside of an
 RCU read-side critical section can be a quiescent state. Therefore,
 *RCU-sched* was created, which follows “classic” RCU in that an
-RCU-sched grace period waits for for pre-existing interrupt and NMI
+RCU-sched grace period waits for pre-existing interrupt and NMI
 handlers. In kernels built with ``CONFIG_PREEMPT=n``, the RCU and
 RCU-sched APIs have identical implementations, while kernels built with
 ``CONFIG_PREEMPT=y`` provide a separate implementation for each.
diff --git linux-libre-5.9-gnu/Documentation/RCU/whatisRCU.rst linux-libre-5.10-rc7-gnu/Documentation/RCU/whatisRCU.rst
index c7f147b8034f..fb3ff76c3e73 100644
--- linux-libre-5.9-gnu/Documentation/RCU/whatisRCU.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/RCU/whatisRCU.rst
@@ -360,7 +360,7 @@ order to amortize their overhead over many uses of the corresponding APIs.
 
 There are at least three flavors of RCU usage in the Linux kernel. The diagram
 above shows the most common one. On the updater side, the rcu_assign_pointer(),
-sychronize_rcu() and call_rcu() primitives used are the same for all three
+synchronize_rcu() and call_rcu() primitives used are the same for all three
 flavors. However for protection (on the reader side), the primitives used vary
 depending on the flavor:
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/LSM/SafeSetID.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/LSM/SafeSetID.rst
index 7bff07ce4fdd..0ec34863c674 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/LSM/SafeSetID.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/LSM/SafeSetID.rst
@@ -3,9 +3,9 @@ SafeSetID
 =========
 SafeSetID is an LSM module that gates the setid family of syscalls to restrict
 UID/GID transitions from a given UID/GID to only those approved by a
-system-wide whitelist. These restrictions also prohibit the given UIDs/GIDs
+system-wide allowlist. These restrictions also prohibit the given UIDs/GIDs
 from obtaining auxiliary privileges associated with CAP_SET{U/G}ID, such as
-allowing a user to set up user namespace UID mappings.
+allowing a user to set up user namespace UID/GID mappings.
 
 
 Background
@@ -98,10 +98,21 @@ Directions for use
 ==================
 This LSM hooks the setid syscalls to make sure transitions are allowed if an
 applicable restriction policy is in place. Policies are configured through
-securityfs by writing to the safesetid/add_whitelist_policy and
-safesetid/flush_whitelist_policies files at the location where securityfs is
-mounted. The format for adding a policy is '<UID>:<UID>', using literal
-numbers, such as '123:456'. To flush the policies, any write to the file is
-sufficient. Again, configuring a policy for a UID will prevent that UID from
-obtaining auxiliary setid privileges, such as allowing a user to set up user
-namespace UID mappings.
+securityfs by writing to the safesetid/uid_allowlist_policy and
+safesetid/gid_allowlist_policy files at the location where securityfs is
+mounted. The format for adding a policy is '<UID>:<UID>' or '<GID>:<GID>',
+using literal numbers, and ending with a newline character such as '123:456\n'.
+Writing an empty string "" will flush the policy. Again, configuring a policy
+for a UID/GID will prevent that UID/GID from obtaining auxiliary setid
+privileges, such as allowing a user to set up user namespace UID/GID mappings.
+
+Note on GID policies and setgroups()
+====================================
+In v5.9 we are adding support for limiting CAP_SETGID privileges as was done
+previously for CAP_SETUID. However, for compatibility with common sandboxing
+related code conventions in userspace, we currently allow arbitrary
+setgroups() calls for processes with CAP_SETGID restrictions. Until we add
+support in a future release for restricting setgroups() calls, these GID
+policies add no meaningful security. setgroups() restrictions will be enforced
+once we have the policy checking code in place, which will rely on GID policy
+configuration code added in v5.9.
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/README.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/README.rst
index 2d16c23ec6f2..2ad806f8f305 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/README.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/README.rst
@@ -354,9 +354,9 @@ Compiling the kernel
    reboot, and enjoy!
 
    If you ever need to change the default root device, video mode,
-   ramdisk size, etc.  in the kernel image, use the ``rdev`` program (or
-   alternatively the LILO boot options when appropriate).  No need to
-   recompile the kernel to change these parameters.
+   etc. in the kernel image, use your bootloader's boot options
+   where appropriate.  No need to recompile the kernel to change
+   these parameters.
 
  - Reboot with the new kernel and enjoy.
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/abi-obsolete.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-obsolete.rst
new file mode 100644
index 000000000000..d095867899c5
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-obsolete.rst
@@ -0,0 +1,11 @@
+ABI obsolete symbols
+====================
+
+Documents interfaces that are still remaining in the kernel, but are
+marked to be removed at some later point in time.
+
+The description of the interface will document the reason why it is
+obsolete and when it can be expected to be removed.
+
+.. kernel-abi:: $srctree/Documentation/ABI/obsolete
+   :rst:
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/abi-removed.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-removed.rst
new file mode 100644
index 000000000000..f7e9e43023c1
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-removed.rst
@@ -0,0 +1,5 @@
+ABI removed symbols
+===================
+
+.. kernel-abi:: $srctree/Documentation/ABI/removed
+   :rst:
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/abi-stable.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-stable.rst
new file mode 100644
index 000000000000..70490736e0d3
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-stable.rst
@@ -0,0 +1,14 @@
+ABI stable symbols
+==================
+
+Documents the interfaces that the developer has defined to be stable.
+
+Userspace programs are free to use these interfaces with no
+restrictions, and backward compatibility for them will be guaranteed
+for at least 2 years.
+
+Most interfaces (like syscalls) are expected to never change and always
+be available.
+
+.. kernel-abi:: $srctree/Documentation/ABI/stable
+   :rst:
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/abi-testing.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-testing.rst
new file mode 100644
index 000000000000..b205b16a72d0
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi-testing.rst
@@ -0,0 +1,20 @@
+ABI testing symbols
+===================
+
+Documents interfaces that are felt to be stable,
+as the main development of this interface has been completed.
+
+The interface can be changed to add new features, but the
+current interface will not break by doing this, unless grave
+errors or security problems are found in them.
+
+Userspace programs can start to rely on these interfaces, but they must
+be aware of changes that can occur before these interfaces move to
+be marked stable.
+
+Programs that use these interfaces are strongly encouraged to add their
+name to the description of these interfaces, so that the kernel
+developers can easily notify them if any changes occur.
+
+.. kernel-abi:: $srctree/Documentation/ABI/testing
+   :rst:
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/abi.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi.rst
new file mode 100644
index 000000000000..bcab3ef2597c
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/abi.rst
@@ -0,0 +1,11 @@
+=====================
+Linux ABI description
+=====================
+
+.. toctree::
+   :maxdepth: 2
+
+   abi-stable
+   abi-testing
+   abi-obsolete
+   abi-removed
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/bcache.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/bcache.rst
index 1eccf952876d..8d3a2d045c0a 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/bcache.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/bcache.rst
@@ -5,11 +5,14 @@ A block layer cache (bcache)
 Say you've got a big slow raid 6, and an ssd or three. Wouldn't it be
 nice if you could use them as cache... Hence bcache.
 
-Wiki and git repositories are at:
+The bcache wiki can be found at:
+  https://bcache.evilpiepirate.org
 
-  - https://bcache.evilpiepirate.org
-  - http://evilpiepirate.org/git/linux-bcache.git
-  - https://evilpiepirate.org/git/bcache-tools.git
+This is the git repository of bcache-tools:
+  https://git.kernel.org/pub/scm/linux/kernel/git/colyli/bcache-tools.git/
+
+The latest bcache kernel code can be found from mainline Linux kernel:
+  https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
 
 It's designed around the performance characteristics of SSDs - it only allocates
 in erase block sized buckets, and it uses a hybrid btree/log to track cached
@@ -41,17 +44,21 @@ in the cache it first disables writeback caching and waits for all dirty data
 to be flushed.
 
 Getting started:
-You'll need make-bcache from the bcache-tools repository. Both the cache device
+You'll need bcache util from the bcache-tools repository. Both the cache device
 and backing device must be formatted before use::
 
-  make-bcache -B /dev/sdb
-  make-bcache -C /dev/sdc
+  bcache make -B /dev/sdb
+  bcache make -C /dev/sdc
 
-make-bcache has the ability to format multiple devices at the same time - if
+`bcache make` has the ability to format multiple devices at the same time - if
 you format your backing devices and cache device at the same time, you won't
 have to manually attach::
 
-  make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
+  bcache make -B /dev/sda /dev/sdb -C /dev/sdc
+
+If your bcache-tools is not updated to latest version and does not have the
+unified `bcache` utility, you may use the legacy `make-bcache` utility to format
+bcache device with same -B and -C parameters.
 
 bcache-tools now ships udev rules, and bcache devices are known to the kernel
 immediately.  Without udev, you can manually register devices like this::
@@ -188,7 +195,7 @@ D) Recovering data without bcache:
 If bcache is not available in the kernel, a filesystem on the backing
 device is still available at an 8KiB offset. So either via a loopdev
 of the backing device created with --offset 8K, or any value defined by
---data-offset when you originally formatted bcache with `make-bcache`.
+--data-offset when you originally formatted bcache with `bcache make`.
 
 For example::
 
@@ -210,7 +217,7 @@ E) Wiping a cache device
 
 After you boot back with bcache enabled, you recreate the cache and attach it::
 
-	host:~# make-bcache -C /dev/sdh2
+	host:~# bcache make -C /dev/sdh2
 	UUID:                   7be7e175-8f4c-4f99-94b2-9c904d227045
 	Set UUID:               5bc072a8-ab17-446d-9744-e247949913c1
 	version:                0
@@ -318,7 +325,7 @@ want for getting the best possible numbers when benchmarking.
 
    The default metadata size in bcache is 8k.  If your backing device is
    RAID based, then be sure to align this by a multiple of your stride
-   width using `make-bcache --data-offset`. If you intend to expand your
+   width using `bcache make --data-offset`. If you intend to expand your
    disk array in the future, then multiply a series of primes by your
    raid stripe size to get the disk multiples that you would like.
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/blockdev/ramdisk.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/blockdev/ramdisk.rst
index b7c2268f8dec..9ce6101e8dd9 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/blockdev/ramdisk.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/blockdev/ramdisk.rst
@@ -6,7 +6,7 @@ Using the RAM disk block device with Linux
 
 	1) Overview
 	2) Kernel Command Line Parameters
-	3) Using "rdev -r"
+	3) Using "rdev"
 	4) An Example of Creating a Compressed RAM Disk
 
 
@@ -59,51 +59,27 @@ default is 4096 (4 MB).
 	rd_size
 		See ramdisk_size.
 
-3) Using "rdev -r"
-------------------
+3) Using "rdev"
+---------------
 
-The usage of the word (two bytes) that "rdev -r" sets in the kernel image is
-as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up
-to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit
-14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a
-prompt/wait sequence is to be given before trying to read the RAM disk. Since
-the RAM disk dynamically grows as data is being written into it, a size field
-is not required. Bits 11 to 13 are not currently used and may as well be zero.
-These numbers are no magical secrets, as seen below::
+"rdev" is an obsolete, deprecated, antiquated utility that could be used
+to set the boot device in a Linux kernel image.
 
-  ./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
-  ./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
-  ./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
+Instead of using rdev, just place the boot device information on the
+kernel command line and pass it to the kernel from the bootloader.
 
-Consider a typical two floppy disk setup, where you will have the
-kernel on disk one, and have already put a RAM disk image onto disk #2.
+You can also pass arguments to the kernel by setting FDARGS in
+arch/x86/boot/Makefile and specify in initrd image by setting FDINITRD in
+arch/x86/boot/Makefile.
 
-Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
-starts at an offset of 0 kB from the beginning of the floppy.
-The command line equivalent is: "ramdisk_start=0"
+Some of the kernel command line boot options that may apply here are::
 
-You want bit 14 as one, indicating that a RAM disk is to be loaded.
-The command line equivalent is: "load_ramdisk=1"
-
-You want bit 15 as one, indicating that you want a prompt/keypress
-sequence so that you have a chance to switch floppy disks.
-The command line equivalent is: "prompt_ramdisk=1"
-
-Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word.
-So to create disk one of the set, you would do::
-
-	/usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0
-	/usr/src/linux# rdev /dev/fd0 /dev/fd0
-	/usr/src/linux# rdev -r /dev/fd0 49152
+  ramdisk_start=N
+  ramdisk_size=M
 
 If you make a boot disk that has LILO, then for the above, you would use::
 
-	append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1"
-
-Since the default start = 0 and the default prompt = 1, you could use::
-
-	append = "load_ramdisk=1"
-
+	append = "ramdisk_start=N ramdisk_size=M"
 
 4) An Example of Creating a Compressed RAM Disk
 -----------------------------------------------
@@ -151,12 +127,9 @@ f) Put the RAM disk image onto the floppy, after the kernel. Use an offset
 
 	dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400
 
-g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
-   For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would
-   have 2^15 + 2^14 + 400 = 49552::
-
-	rdev /dev/fd0 /dev/fd0
-	rdev -r /dev/fd0 49552
+g) Make sure that you have already specified the boot information in
+   FDARGS and FDINITRD or that you use a bootloader to pass kernel
+   command line boot options to the kernel.
 
 That is it. You now have your boot/root compressed RAM disk floppy. Some
 users may wish to combine steps (d) and (f) by using a pipe.
@@ -167,11 +140,14 @@ users may wish to combine steps (d) and (f) by using a pipe.
 Changelog:
 ----------
 
+SEPT-2020 :
+
+                Removed usage of "rdev"
+
 10-22-04 :
 		Updated to reflect changes in command line options, remove
 		obsolete references, general cleanup.
 		James Nelson (james4765@gmail.com)
 
-
 12-95 :
 		Original Document
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/bootconfig.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/bootconfig.rst
index a22024f9175e..9b90efcc3a35 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/bootconfig.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/bootconfig.rst
@@ -137,15 +137,24 @@ Boot Kernel With a Boot Config
 ==============================
 
 Since the boot configuration file is loaded with initrd, it will be added
-to the end of the initrd (initramfs) image file with size, checksum and
-12-byte magic word as below.
+to the end of the initrd (initramfs) image file with padding, size,
+checksum and 12-byte magic word as below.
 
-[initrd][bootconfig][size(u32)][checksum(u32)][#BOOTCONFIG\n]
+[initrd][bootconfig][padding][size(le32)][checksum(le32)][#BOOTCONFIG\n]
+
+The size and checksum fields are unsigned 32bit little endian value.
+
+When the boot configuration is added to the initrd image, the total
+file size is aligned to 4 bytes. To fill the gap, null characters
+(``\0``) will be added. Thus the ``size`` is the length of the bootconfig
+file + padding bytes.
 
 The Linux kernel decodes the last part of the initrd image in memory to
 get the boot configuration data.
 Because of this "piggyback" method, there is no need to change or
-update the boot loader and the kernel image itself.
+update the boot loader and the kernel image itself as long as the boot
+loader passes the correct initrd file size. If by any chance, the boot
+loader passes a longer size, the kernel feils to find the bootconfig data.
 
 To do this operation, Linux kernel provides "bootconfig" command under
 tools/bootconfig, which allows admin to apply or delete the config file
@@ -176,7 +185,8 @@ up to 512 key-value pairs. If keys contains 3 words in average, it can
 contain 256 key-value pairs. In most cases, the number of config items
 will be under 100 entries and smaller than 8KB, so it would be enough.
 If the node number exceeds 1024, parser returns an error even if the file
-size is smaller than 32KB.
+size is smaller than 32KB. (Note that this maximum size is not including
+the padding null characters.)
 Anyway, since bootconfig command verifies it when appending a boot config
 to initrd image, user can notice it before boot.
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
index 7ade3abd342a..5d844ed4df69 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -1,3 +1,5 @@
+.. _cpusets:
+
 =======
 CPUSETS
 =======
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/cgroup-v2.rst
index baa07b30845e..608d7c279396 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -1259,6 +1259,10 @@ PAGE_SIZE multiple when read back.
 	can show up in the middle. Don't rely on items remaining in a
 	fixed position; use the keys to look up specific values!
 
+	If the entry has no per-node counter(or not show in the
+	mempry.numa_stat). We use 'npn'(non-per-node) as the tag
+	to indicate that it will not show in the mempry.numa_stat.
+
 	  anon
 		Amount of memory used in anonymous mappings such as
 		brk(), sbrk(), and mmap(MAP_ANONYMOUS)
@@ -1270,15 +1274,11 @@ PAGE_SIZE multiple when read back.
 	  kernel_stack
 		Amount of memory allocated to kernel stacks.
 
-	  slab
-		Amount of memory used for storing in-kernel data
-		structures.
-
-	  percpu
+	  percpu(npn)
 		Amount of memory used for storing per-cpu kernel
 		data structures.
 
-	  sock
+	  sock(npn)
 		Amount of memory used in network transmission buffers
 
 	  shmem
@@ -1318,11 +1318,9 @@ PAGE_SIZE multiple when read back.
 		Part of "slab" that cannot be reclaimed on memory
 		pressure.
 
-	  pgfault
-		Total number of page faults incurred
-
-	  pgmajfault
-		Number of major page faults incurred
+	  slab(npn)
+		Amount of memory used for storing in-kernel data
+		structures.
 
 	  workingset_refault_anon
 		Number of refaults of previously evicted anonymous pages.
@@ -1348,37 +1346,68 @@ PAGE_SIZE multiple when read back.
 	  workingset_nodereclaim
 		Number of times a shadow node has been reclaimed
 
-	  pgrefill
+	  pgfault(npn)
+		Total number of page faults incurred
+
+	  pgmajfault(npn)
+		Number of major page faults incurred
+
+	  pgrefill(npn)
 		Amount of scanned pages (in an active LRU list)
 
-	  pgscan
+	  pgscan(npn)
 		Amount of scanned pages (in an inactive LRU list)
 
-	  pgsteal
+	  pgsteal(npn)
 		Amount of reclaimed pages
 
-	  pgactivate
+	  pgactivate(npn)
 		Amount of pages moved to the active LRU list
 
-	  pgdeactivate
+	  pgdeactivate(npn)
 		Amount of pages moved to the inactive LRU list
 
-	  pglazyfree
+	  pglazyfree(npn)
 		Amount of pages postponed to be freed under memory pressure
 
-	  pglazyfreed
+	  pglazyfreed(npn)
 		Amount of reclaimed lazyfree pages
 
-	  thp_fault_alloc
+	  thp_fault_alloc(npn)
 		Number of transparent hugepages which were allocated to satisfy
 		a page fault. This counter is not present when CONFIG_TRANSPARENT_HUGEPAGE
                 is not set.
 
-	  thp_collapse_alloc
+	  thp_collapse_alloc(npn)
 		Number of transparent hugepages which were allocated to allow
 		collapsing an existing range of pages. This counter is not
 		present when CONFIG_TRANSPARENT_HUGEPAGE is not set.
 
+  memory.numa_stat
+	A read-only nested-keyed file which exists on non-root cgroups.
+
+	This breaks down the cgroup's memory footprint into different
+	types of memory, type-specific details, and other information
+	per node on the state of the memory management system.
+
+	This is useful for providing visibility into the NUMA locality
+	information within an memcg since the pages are allowed to be
+	allocated from any physical node. One of the use case is evaluating
+	application performance by combining this information with the
+	application's CPU allocation.
+
+	All memory amounts are in bytes.
+
+	The output format of memory.numa_stat is::
+
+	  type N0=<bytes in node 0> N1=<bytes in node 1> ...
+
+	The entries are ordered to be human readable, and new entries
+	can show up in the middle. Don't rely on items remaining in a
+	fixed position; use the keys to look up specific values!
+
+	The entries can refer to the memory.stat.
+
   memory.swap.current
 	A read-only single value file which exists on non-root
 	cgroups.
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/cpu-load.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/cpu-load.rst
index ebdecf864080..f3ada90e9ca8 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/cpu-load.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/cpu-load.rst
@@ -61,43 +61,46 @@ will lead to quite erratic information inside ``/proc/stat``::
 
 	static volatile sig_atomic_t stop;
 
-	static void sighandler (int signr)
+	static void sighandler(int signr)
 	{
-	(void) signr;
-	stop = 1;
+		(void) signr;
+		stop = 1;
 	}
+
 	static unsigned long hog (unsigned long niters)
 	{
-	stop = 0;
-	while (!stop && --niters);
-	return niters;
+		stop = 0;
+		while (!stop && --niters);
+		return niters;
 	}
+
 	int main (void)
 	{
-	int i;
-	struct itimerval it = { .it_interval = { .tv_sec = 0, .tv_usec = 1 },
-				.it_value = { .tv_sec = 0, .tv_usec = 1 } };
-	sigset_t set;
-	unsigned long v[HIST];
-	double tmp = 0.0;
-	unsigned long n;
-	signal (SIGALRM, &sighandler);
-	setitimer (ITIMER_REAL, &it, NULL);
-
-	hog (ULONG_MAX);
-	for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog (ULONG_MAX);
-	for (i = 0; i < HIST; ++i) tmp += v[i];
-	tmp /= HIST;
-	n = tmp - (tmp / 3.0);
-
-	sigemptyset (&set);
-	sigaddset (&set, SIGALRM);
-
-	for (;;) {
-		hog (n);
-		sigwait (&set, &i);
-	}
-	return 0;
+		int i;
+		struct itimerval it = {
+			.it_interval = { .tv_sec = 0, .tv_usec = 1 },
+			.it_value    = { .tv_sec = 0, .tv_usec = 1 } };
+		sigset_t set;
+		unsigned long v[HIST];
+		double tmp = 0.0;
+		unsigned long n;
+		signal(SIGALRM, &sighandler);
+		setitimer(ITIMER_REAL, &it, NULL);
+
+		hog (ULONG_MAX);
+		for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog(ULONG_MAX);
+		for (i = 0; i < HIST; ++i) tmp += v[i];
+		tmp /= HIST;
+		n = tmp - (tmp / 3.0);
+
+		sigemptyset(&set);
+		sigaddset(&set, SIGALRM);
+
+		for (;;) {
+			hog(n);
+			sigwait(&set, &i);
+		}
+		return 0;
 	}
 
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/gpio/gpio-mockup.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/gpio/gpio-mockup.rst
new file mode 100644
index 000000000000..9fa1618b3adc
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/gpio/gpio-mockup.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+GPIO Testing Driver
+===================
+
+The GPIO Testing Driver (gpio-mockup) provides a way to create simulated GPIO
+chips for testing purposes. The lines exposed by these chips can be accessed
+using the standard GPIO character device interface as well as manipulated
+using the dedicated debugfs directory structure.
+
+Creating simulated chips using module params
+--------------------------------------------
+
+When loading the gpio-mockup driver a number of parameters can be passed to the
+module.
+
+    gpio_mockup_ranges
+
+        This parameter takes an argument in the form of an array of integer
+        pairs. Each pair defines the base GPIO number (if any) and the number
+        of lines exposed by the chip. If the base GPIO is -1, the gpiolib
+        will assign it automatically.
+
+        Example: gpio_mockup_ranges=-1,8,-1,16,405,4
+
+        The line above creates three chips. The first one will expose 8 lines,
+        the second 16 and the third 4. The base GPIO for the third chip is set
+        to 405 while for two first chips it will be assigned automatically.
+
+    gpio_named_lines
+
+        This parameter doesn't take any arguments. It lets the driver know that
+        GPIO lines exposed by it should be named.
+
+        The name format is: gpio-mockup-X-Y where X is mockup chip's ID
+        and Y is the line offset.
+
+Manipulating simulated lines
+----------------------------
+
+Each mockup chip creates its own subdirectory in /sys/kernel/debug/gpio-mockup/.
+The directory is named after the chip's label. A symlink is also created, named
+after the chip's name, which points to the label directory.
+
+Inside each subdirectory, there's a separate attribute for each GPIO line. The
+name of the attribute represents the line's offset in the chip.
+
+Reading from a line attribute returns the current value. Writing to it (0 or 1)
+changes the configuration of the simulated pull-up/pull-down resistor
+(1 - pull-up, 0 - pull-down).
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/gpio/index.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/gpio/index.rst
index ef2838638e96..7db367572f30 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/gpio/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/gpio/index.rst
@@ -9,6 +9,7 @@ gpio
 
     gpio-aggregator
     sysfs
+    gpio-mockup
 
 .. only::  subproject and html
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/index.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/index.rst
index ed1cf94ea50c..4e0c4ae44acd 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/index.rst
@@ -18,6 +18,8 @@ etc.
    devices
    sysctl/index
 
+   abi
+
 This section describes CPU vulnerabilities and their mitigations.
 
 .. toctree::
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/kdump/gdbmacros.txt linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
index 220d0a80ca2c..82aecdcae8a6 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -170,57 +170,103 @@ document trapinfo
 	address the kernel panicked.
 end
 
-define dump_log_idx
-	set $idx = $arg0
-	if ($argc > 1)
-		set $prev_flags = $arg1
+define dump_record
+	set var $desc = $arg0
+	set var $info = $arg1
+	if ($argc > 2)
+		set var $prev_flags = $arg2
 	else
-		set $prev_flags = 0
+		set var $prev_flags = 0
 	end
-	set $msg = ((struct printk_log *) (log_buf + $idx))
-	set $prefix = 1
-	set $newline = 1
-	set $log = log_buf + $idx + sizeof(*$msg)
-
-	# prev & LOG_CONT && !(msg->flags & LOG_PREIX)
-	if (($prev_flags & 8) && !($msg->flags & 4))
-		set $prefix = 0
+
+	set var $prefix = 1
+	set var $newline = 1
+
+	set var $begin = $desc->text_blk_lpos.begin % (1U << prb->text_data_ring.size_bits)
+	set var $next = $desc->text_blk_lpos.next % (1U << prb->text_data_ring.size_bits)
+
+	# handle data-less record
+	if ($begin & 1)
+		set var $text_len = 0
+		set var $log = ""
+	else
+		# handle wrapping data block
+		if ($begin > $next)
+			set var $begin = 0
+		end
+
+		# skip over descriptor id
+		set var $begin = $begin + sizeof(long)
+
+		# handle truncated message
+		if ($next - $begin < $info->text_len)
+			set var $text_len = $next - $begin
+		else
+			set var $text_len = $info->text_len
+		end
+
+		set var $log = &prb->text_data_ring.data[$begin]
+	end
+
+	# prev & LOG_CONT && !(info->flags & LOG_PREIX)
+	if (($prev_flags & 8) && !($info->flags & 4))
+		set var $prefix = 0
 	end
 
-	# msg->flags & LOG_CONT
-	if ($msg->flags & 8)
+	# info->flags & LOG_CONT
+	if ($info->flags & 8)
 		# (prev & LOG_CONT && !(prev & LOG_NEWLINE))
 		if (($prev_flags & 8) && !($prev_flags & 2))
-			set $prefix = 0
+			set var $prefix = 0
 		end
-		# (!(msg->flags & LOG_NEWLINE))
-		if (!($msg->flags & 2))
-			set $newline = 0
+		# (!(info->flags & LOG_NEWLINE))
+		if (!($info->flags & 2))
+			set var $newline = 0
 		end
 	end
 
 	if ($prefix)
-		printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000
+		printf "[%5lu.%06lu] ", $info->ts_nsec / 1000000000, $info->ts_nsec % 1000000000
 	end
-	if ($msg->text_len != 0)
-		eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len
+	if ($text_len)
+		eval "printf \"%%%d.%ds\", $log", $text_len, $text_len
 	end
 	if ($newline)
 		printf "\n"
 	end
-	if ($msg->dict_len > 0)
-		set $dict = $log + $msg->text_len
-		set $idx = 0
-		set $line = 1
-		while ($idx < $msg->dict_len)
-			if ($line)
-				printf " "
-				set $line = 0
+
+	# handle dictionary data
+
+	set var $dict = &$info->dev_info.subsystem[0]
+	set var $dict_len = sizeof($info->dev_info.subsystem)
+	if ($dict[0] != '\0')
+		printf " SUBSYSTEM="
+		set var $idx = 0
+		while ($idx < $dict_len)
+			set var $c = $dict[$idx]
+			if ($c == '\0')
+				loop_break
+			else
+				if ($c < ' ' || $c >= 127 || $c == '\\')
+					printf "\\x%02x", $c
+				else
+					printf "%c", $c
+				end
 			end
-			set $c = $dict[$idx]
+			set var $idx = $idx + 1
+		end
+		printf "\n"
+	end
+
+	set var $dict = &$info->dev_info.device[0]
+	set var $dict_len = sizeof($info->dev_info.device)
+	if ($dict[0] != '\0')
+		printf " DEVICE="
+		set var $idx = 0
+		while ($idx < $dict_len)
+			set var $c = $dict[$idx]
 			if ($c == '\0')
-				printf "\n"
-				set $line = 1
+				loop_break
 			else
 				if ($c < ' ' || $c >= 127 || $c == '\\')
 					printf "\\x%02x", $c
@@ -228,33 +274,46 @@ define dump_log_idx
 					printf "%c", $c
 				end
 			end
-			set $idx = $idx + 1
+			set var $idx = $idx + 1
 		end
 		printf "\n"
 	end
 end
-document dump_log_idx
-	Dump a single log given its index in the log buffer.  The first
-	parameter is the index into log_buf, the second is optional and
-	specified the previous log buffer's flags, used for properly
-	formatting continued lines.
+document dump_record
+	Dump a single record. The first parameter is the descriptor,
+	the second parameter is the info, the third parameter is
+	optional and specifies the previous record's flags, used for
+	properly formatting continued lines.
 end
 
 define dmesg
-	set $i = log_first_idx
-	set $end_idx = log_first_idx
-	set $prev_flags = 0
+	# definitions from kernel/printk/printk_ringbuffer.h
+	set var $desc_committed = 1
+	set var $desc_finalized = 2
+	set var $desc_sv_bits = sizeof(long) * 8
+	set var $desc_flags_shift = $desc_sv_bits - 2
+	set var $desc_flags_mask = 3 << $desc_flags_shift
+	set var $id_mask = ~$desc_flags_mask
+
+	set var $desc_count = 1U << prb->desc_ring.count_bits
+	set var $prev_flags = 0
+
+	set var $id = prb->desc_ring.tail_id.counter
+	set var $end_id = prb->desc_ring.head_id.counter
 
 	while (1)
-		set $msg = ((struct printk_log *) (log_buf + $i))
-		if ($msg->len == 0)
-			set $i = 0
-		else
-			dump_log_idx $i $prev_flags
-			set $i = $i + $msg->len
-			set $prev_flags = $msg->flags
+		set var $desc = &prb->desc_ring.descs[$id % $desc_count]
+		set var $info = &prb->desc_ring.infos[$id % $desc_count]
+
+		# skip non-committed record
+		set var $state = 3 & ($desc->state_var.counter >> $desc_flags_shift)
+		if ($state == $desc_committed || $state == $desc_finalized)
+			dump_record $desc $info $prev_flags
+			set var $prev_flags = $info->flags
 		end
-		if ($i == $end_idx)
+
+		set var $id = ($id + 1) & $id_mask
+		if ($id == $end_id)
 			loop_break
 		end
 	end
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/kdump/kdump.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kdump/kdump.rst
index 2da65fef2a1c..75a9dd98e76e 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/kdump/kdump.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kdump/kdump.rst
@@ -509,9 +509,12 @@ ELF32-format headers using the --elf32-core-headers kernel option on the
 dump kernel.
 
 You can also use the Crash utility to analyze dump files in Kdump
-format. Crash is available on Dave Anderson's site at the following URL:
+format. Crash is available at the following URL:
 
-   http://people.redhat.com/~anderson/
+   https://github.com/crash-utility/crash
+
+Crash document can be found at:
+   https://crash-utility.github.io/
 
 Trigger Kdump on WARN()
 =======================
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 2baad0bfb09d..e44a6c01f336 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -189,50 +189,123 @@ from this.
 Free areas descriptor. User-space tools use this value to iterate the
 free_area ranges. MAX_ORDER is used by the zone buddy allocator.
 
-log_first_idx
+prb
+---
+
+A pointer to the printk ringbuffer (struct printk_ringbuffer). This
+may be pointing to the static boot ringbuffer or the dynamically
+allocated ringbuffer, depending on when the the core dump occurred.
+Used by user-space tools to read the active kernel log buffer.
+
+printk_rb_static
+----------------
+
+A pointer to the static boot printk ringbuffer. If @prb has a
+different value, this is useful for viewing the initial boot messages,
+which may have been overwritten in the dynamically allocated
+ringbuffer.
+
+clear_seq
+---------
+
+The sequence number of the printk() record after the last clear
+command. It indicates the first record after the last
+SYSLOG_ACTION_CLEAR, like issued by 'dmesg -c'. Used by user-space
+tools to dump a subset of the dmesg log.
+
+printk_ringbuffer
+-----------------
+
+The size of a printk_ringbuffer structure. This structure contains all
+information required for accessing the various components of the
+kernel log buffer.
+
+(printk_ringbuffer, desc_ring|text_data_ring|dict_data_ring|fail)
+-----------------------------------------------------------------
+
+Offsets for the various components of the printk ringbuffer. Used by
+user-space tools to view the kernel log buffer without requiring the
+declaration of the structure.
+
+prb_desc_ring
 -------------
 
-Index of the first record stored in the buffer log_buf. Used by
-user-space tools to read the strings in the log_buf.
+The size of the prb_desc_ring structure. This structure contains
+information about the set of record descriptors.
 
-log_buf
--------
+(prb_desc_ring, count_bits|descs|head_id|tail_id)
+-------------------------------------------------
+
+Offsets for the fields describing the set of record descriptors. Used
+by user-space tools to be able to traverse the descriptors without
+requiring the declaration of the structure.
+
+prb_desc
+--------
+
+The size of the prb_desc structure. This structure contains
+information about a single record descriptor.
+
+(prb_desc, info|state_var|text_blk_lpos|dict_blk_lpos)
+------------------------------------------------------
+
+Offsets for the fields describing a record descriptors. Used by
+user-space tools to be able to read descriptors without requiring
+the declaration of the structure.
+
+prb_data_blk_lpos
+-----------------
+
+The size of the prb_data_blk_lpos structure. This structure contains
+information about where the text or dictionary data (data block) is
+located within the respective data ring.
+
+(prb_data_blk_lpos, begin|next)
+-------------------------------
 
-Console output is written to the ring buffer log_buf at index
-log_first_idx. Used to get the kernel log.
+Offsets for the fields describing the location of a data block. Used
+by user-space tools to be able to locate data blocks without
+requiring the declaration of the structure.
 
-log_buf_len
+printk_info
 -----------
 
-log_buf's length.
+The size of the printk_info structure. This structure contains all
+the meta-data for a record.
 
-clear_idx
----------
+(printk_info, seq|ts_nsec|text_len|dict_len|caller_id)
+------------------------------------------------------
 
-The index that the next printk() record to read after the last clear
-command. It indicates the first record after the last SYSLOG_ACTION
-_CLEAR, like issued by 'dmesg -c'. Used by user-space tools to dump
-the dmesg log.
+Offsets for the fields providing the meta-data for a record. Used by
+user-space tools to be able to read the information without requiring
+the declaration of the structure.
 
-log_next_idx
-------------
+prb_data_ring
+-------------
 
-The index of the next record to store in the buffer log_buf. Used to
-compute the index of the current buffer position.
+The size of the prb_data_ring structure. This structure contains
+information about a set of data blocks.
 
-printk_log
-----------
+(prb_data_ring, size_bits|data|head_lpos|tail_lpos)
+---------------------------------------------------
 
-The size of a structure printk_log. Used to compute the size of
-messages, and extract dmesg log. It encapsulates header information for
-log_buf, such as timestamp, syslog level, etc.
+Offsets for the fields describing a set of data blocks. Used by
+user-space tools to be able to access the data blocks without
+requiring the declaration of the structure.
 
-(printk_log, ts_nsec|len|text_len|dict_len)
--------------------------------------------
+atomic_long_t
+-------------
+
+The size of the atomic_long_t structure. Used by user-space tools to
+be able to copy the full structure, regardless of its
+architecture-specific implementation.
+
+(atomic_long_t, counter)
+------------------------
 
-It represents field offsets in struct printk_log. User space tools
-parse it and check whether the values of printk_log's members have been
-changed.
+Offset for the long value of an atomic_long_t variable. Used by
+user-space tools to access the long value without requiring the
+architecture-specific declaration.
 
 (free_area.free_list, MIGRATE_TYPES)
 ------------------------------------
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kernel-parameters.txt
index a1068742a6df..44fde25bb221 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -577,7 +577,7 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clearcpuid=BITNUM [X86]
+	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily
@@ -591,13 +591,24 @@
 			some critical bits.
 
 	cma=nn[MG]@[start[MG][-end[MG]]]
-			[ARM,X86,KNL]
+			[KNL,CMA]
 			Sets the size of kernel global memory area for
 			contiguous memory allocations and optionally the
 			placement constraint by the physical address range of
 			memory allocations. A value of 0 disables CMA
 			altogether. For more information, see
-			include/linux/dma-contiguous.h
+			kernel/dma/contiguous.c
+
+	cma_pernuma=nn[MG]
+			[ARM64,KNL]
+			Sets the size of kernel per-numa memory area for
+			contiguous memory allocations. A value of 0 disables
+			per-numa CMA altogether. And If this option is not
+			specificed, the default value is 0.
+			With per-numa CMA enabled, DMA users on node nid will
+			first try to allocate buffer from the pernuma area
+			which is located in node nid, if the allocation fails,
+			they will fallback to the global default memory area.
 
 	cmo_free_hint=	[PPC] Format: { yes | no }
 			Specify whether pages are marked as being inactive
@@ -940,7 +951,7 @@
 			Arch Perfmon v4 (Skylake and newer).
 
 	disable_ddw	[PPC/PSERIES]
-			Disable Dynamic DMA Window support. Use this if
+			Disable Dynamic DMA Window support. Use this
 			to workaround buggy firmware.
 
 	disable_ipv6=	[IPV6]
@@ -1019,7 +1030,7 @@
 			what data is available or for reverse-engineering.
 
 	dyndbg[="val"]		[KNL,DYNAMIC_DEBUG]
-	module.dyndbg[="val"]
+	<module>.dyndbg[="val"]
 			Enable debug messages at boot time.  See
 			Documentation/admin-guide/dynamic-debug-howto.rst
 			for details.
@@ -1027,7 +1038,7 @@
 	nopku		[X86] Disable Memory Protection Keys CPU feature found
 			in some Intel CPUs.
 
-	module.async_probe [KNL]
+	<module>.async_probe [KNL]
 			Enable asynchronous probe on this module.
 
 	early_ioremap_debug [KNL]
@@ -1332,12 +1343,18 @@
 			current integrity status.
 
 	failslab=
+	fail_usercopy=
 	fail_page_alloc=
 	fail_make_request=[KNL]
 			General fault injection mechanism.
 			Format: <interval>,<probability>,<space>,<times>
 			See also Documentation/fault-injection/.
 
+	fb_tunnels=	[NET]
+			Format: { initns | none }
+			See Documentation/admin-guide/sysctl/net.rst for
+			fb_tunnels_only_for_init_ns
+
 	floppy=		[HW]
 			See Documentation/admin-guide/blockdev/floppy.rst.
 
@@ -1956,7 +1973,7 @@
 			1 - Bypass the IOMMU for DMA.
 			unset - Use value of CONFIG_IOMMU_DEFAULT_PASSTHROUGH.
 
-	io7=		[HW] IO7 for Marvel based alpha systems
+	io7=		[HW] IO7 for Marvel-based Alpha systems
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
@@ -2177,7 +2194,7 @@
 	kgdbwait	[KGDB] Stop kernel execution and enter the
 			kernel debugger at the earliest opportunity.
 
-	kmac=		[MIPS] korina ethernet MAC address.
+	kmac=		[MIPS] Korina ethernet MAC address.
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
@@ -2258,6 +2275,14 @@
 			[KVM,ARM] Allow use of GICv4 for direct injection of
 			LPIs.
 
+	kvm_cma_resv_ratio=n [PPC]
+			Reserves given percentage from system memory area for
+			contiguous memory allocation for KVM hash pagetable
+			allocation.
+			By default it reserves 5% of total system memory.
+			Format: <integer>
+			Default: 5
+
 	kvm-intel.ept=	[KVM,Intel] Disable extended page tables
 			(virtualized MMU) support on capable Intel chips.
 			Default is 1 (enabled)
@@ -2367,9 +2392,10 @@
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
-	lapic=		[X86,APIC] "notscdeadline" Do not use TSC deadline
+	lapic=		[X86,APIC] Do not use TSC deadline
 			value for LAPIC timer one-shot implementation. Default
 			back to the programmable timer unit in the LAPIC.
+			Format: notscdeadline
 
 	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
 			in C2 power state.
@@ -2441,8 +2467,7 @@
 
 	memblock=debug	[KNL] Enable memblock debug messages.
 
-	load_ramdisk=	[RAM] List of ramdisks to load from floppy
-			See Documentation/admin-guide/blockdev/ramdisk.rst.
+	load_ramdisk=	[RAM] [Deprecated]
 
 	lockd.nlm_grace_period=P  [NFS] Assign grace period.
 			Format: <integer>
@@ -2579,8 +2604,8 @@
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1
 
-	machtype=	[Loongson] Share the same kernel image file between different
-			 yeeloong laptop.
+	machtype=	[Loongson] Share the same kernel image file between
+			different yeeloong laptops.
 			Example: machtype=lemote-yeeloong-2f-7inch
 
 	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater
@@ -2833,6 +2858,8 @@
 					       mds=off [X86]
 					       tsx_async_abort=off [X86]
 					       kvm.nx_huge_pages=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3070,6 +3097,10 @@
 			and gids from such clients.  This is intended to ease
 			migration from NFSv2/v3.
 
+	nmi_backtrace.backtrace_idle [KNL]
+			Dump stacks even of idle CPUs in response to an
+			NMI stack-backtrace request.
+
 	nmi_debug=	[KNL,SH] Specify one or more actions to take
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
@@ -3157,6 +3188,8 @@
 
 	noefi		Disable EFI runtime services support.
 
+	no_entry_flush  [PPC] Don't flush the L1-D cache when entering the kernel.
+
 	noexec		[IA-64]
 
 	noexec		[X86]
@@ -3185,7 +3218,7 @@
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
-	nohugeiomap	[KNL,X86,PPC] Disable kernel huge I/O mappings.
+	nohugeiomap	[KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
 
 	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
 			Equivalent to smt=1.
@@ -3206,6 +3239,9 @@
 	nospec_store_bypass_disable
 			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
 
+	no_uaccess_flush
+	                [PPC] Don't flush the L1-D cache after accessing user data.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
@@ -3921,9 +3957,7 @@
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.
 
-	prompt_ramdisk=	[RAM] List of RAM disks to prompt for floppy disk
-			before loading.
-			See Documentation/admin-guide/blockdev/ramdisk.rst.
+	prompt_ramdisk=	[RAM] [Deprecated]
 
 	prot_virt=	[S390] enable hosting protected virtual machines
 			isolated from the hypervisor (if hardware supports
@@ -3981,6 +4015,8 @@
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/admin-guide/blockdev/ramdisk.rst.
 
+	ramdisk_start=	[RAM] RAM disk image start address
+
 	random.trust_cpu={on,off}
 			[KNL] Enable or disable trusting the use of the
 			CPU's random number generator (if available) to
@@ -4149,46 +4185,55 @@
 			This wake_up() will be accompanied by a
 			WARN_ONCE() splat and an ftrace_dump().
 
+	rcutree.rcu_unlock_delay= [KNL]
+			In CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels,
+			this specifies an rcu_read_unlock()-time delay
+			in microseconds.  This defaults to zero.
+			Larger delays increase the probability of
+			catching RCU pointer leaks, that is, buggy use
+			of RCU-protected pointers after the relevant
+			rcu_read_unlock() has completed.
+
 	rcutree.sysrq_rcu= [KNL]
 			Commandeer a sysrq key to dump out Tree RCU's
 			rcu_node tree with an eye towards determining
 			why a new grace period has not yet started.
 
-	rcuperf.gp_async= [KNL]
+	rcuscale.gp_async= [KNL]
 			Measure performance of asynchronous
 			grace-period primitives such as call_rcu().
 
-	rcuperf.gp_async_max= [KNL]
+	rcuscale.gp_async_max= [KNL]
 			Specify the maximum number of outstanding
 			callbacks per writer thread.  When a writer
 			thread exceeds this limit, it invokes the
 			corresponding flavor of rcu_barrier() to allow
 			previously posted callbacks to drain.
 
-	rcuperf.gp_exp= [KNL]
+	rcuscale.gp_exp= [KNL]
 			Measure performance of expedited synchronous
 			grace-period primitives.
 
-	rcuperf.holdoff= [KNL]
+	rcuscale.holdoff= [KNL]
 			Set test-start holdoff period.  The purpose of
 			this parameter is to delay the start of the
 			test until boot completes in order to avoid
 			interference.
 
-	rcuperf.kfree_rcu_test= [KNL]
+	rcuscale.kfree_rcu_test= [KNL]
 			Set to measure performance of kfree_rcu() flooding.
 
-	rcuperf.kfree_nthreads= [KNL]
+	rcuscale.kfree_nthreads= [KNL]
 			The number of threads running loops of kfree_rcu().
 
-	rcuperf.kfree_alloc_num= [KNL]
+	rcuscale.kfree_alloc_num= [KNL]
 			Number of allocations and frees done in an iteration.
 
-	rcuperf.kfree_loops= [KNL]
-			Number of loops doing rcuperf.kfree_alloc_num number
+	rcuscale.kfree_loops= [KNL]
+			Number of loops doing rcuscale.kfree_alloc_num number
 			of allocations and frees.
 
-	rcuperf.nreaders= [KNL]
+	rcuscale.nreaders= [KNL]
 			Set number of RCU readers.  The value -1 selects
 			N, where N is the number of CPUs.  A value
 			"n" less than -1 selects N-n+1, where N is again
@@ -4197,23 +4242,23 @@
 			A value of "n" less than or equal to -N selects
 			a single reader.
 
-	rcuperf.nwriters= [KNL]
+	rcuscale.nwriters= [KNL]
 			Set number of RCU writers.  The values operate
-			the same as for rcuperf.nreaders.
+			the same as for rcuscale.nreaders.
 			N, where N is the number of CPUs
 
-	rcuperf.perf_type= [KNL]
+	rcuscale.perf_type= [KNL]
 			Specify the RCU implementation to test.
 
-	rcuperf.shutdown= [KNL]
+	rcuscale.shutdown= [KNL]
 			Shut the system down after performance tests
 			complete.  This is useful for hands-off automated
 			testing.
 
-	rcuperf.verbose= [KNL]
+	rcuscale.verbose= [KNL]
 			Enable additional printk() statements.
 
-	rcuperf.writer_holdoff= [KNL]
+	rcuscale.writer_holdoff= [KNL]
 			Write-side holdoff between grace periods,
 			in microseconds.  The default of zero says
 			no holdoff.
@@ -4266,6 +4311,18 @@
 			are zero, rcutorture acts as if is interpreted
 			they are all non-zero.
 
+	rcutorture.irqreader= [KNL]
+			Run RCU readers from irq handlers, or, more
+			accurately, from a timer handler.  Not all RCU
+			flavors take kindly to this sort of thing.
+
+	rcutorture.leakpointer= [KNL]
+			Leak an RCU-protected pointer out of the reader.
+			This can of course result in splats, and is
+			intended to test the ability of things like
+			CONFIG_RCU_STRICT_GRACE_PERIOD=y to detect
+			such leaks.
+
 	rcutorture.n_barrier_cbs= [KNL]
 			Set callbacks/threads for rcu_barrier() testing.
 
@@ -4487,8 +4544,8 @@
 	refscale.shutdown= [KNL]
 			Shut down the system at the end of the performance
 			test.  This defaults to 1 (shut it down) when
-			rcuperf is built into the kernel and to 0 (leave
-			it running) when rcuperf is built as a module.
+			refscale is built into the kernel and to 0 (leave
+			it running) when refscale is built as a module.
 
 	refscale.verbose= [KNL]
 			Enable additional printk() statements.
@@ -4634,6 +4691,98 @@
 			Format: integer between 0 and 10
 			Default is 0.
 
+	scftorture.holdoff= [KNL]
+			Number of seconds to hold off before starting
+			test.  Defaults to zero for module insertion and
+			to 10 seconds for built-in smp_call_function()
+			tests.
+
+	scftorture.longwait= [KNL]
+			Request ridiculously long waits randomly selected
+			up to the chosen limit in seconds.  Zero (the
+			default) disables this feature.  Please note
+			that requesting even small non-zero numbers of
+			seconds can result in RCU CPU stall warnings,
+			softlockup complaints, and so on.
+
+	scftorture.nthreads= [KNL]
+			Number of kthreads to spawn to invoke the
+			smp_call_function() family of functions.
+			The default of -1 specifies a number of kthreads
+			equal to the number of CPUs.
+
+	scftorture.onoff_holdoff= [KNL]
+			Number seconds to wait after the start of the
+			test before initiating CPU-hotplug operations.
+
+	scftorture.onoff_interval= [KNL]
+			Number seconds to wait between successive
+			CPU-hotplug operations.  Specifying zero (which
+			is the default) disables CPU-hotplug operations.
+
+	scftorture.shutdown_secs= [KNL]
+			The number of seconds following the start of the
+			test after which to shut down the system.  The
+			default of zero avoids shutting down the system.
+			Non-zero values are useful for automated tests.
+
+	scftorture.stat_interval= [KNL]
+			The number of seconds between outputting the
+			current test statistics to the console.  A value
+			of zero disables statistics output.
+
+	scftorture.stutter_cpus= [KNL]
+			The number of jiffies to wait between each change
+			to the set of CPUs under test.
+
+	scftorture.use_cpus_read_lock= [KNL]
+			Use use_cpus_read_lock() instead of the default
+			preempt_disable() to disable CPU hotplug
+			while invoking one of the smp_call_function*()
+			functions.
+
+	scftorture.verbose= [KNL]
+			Enable additional printk() statements.
+
+	scftorture.weight_single= [KNL]
+			The probability weighting to use for the
+			smp_call_function_single() function with a zero
+			"wait" parameter.  A value of -1 selects the
+			default if all other weights are -1.  However,
+			if at least one weight has some other value, a
+			value of -1 will instead select a weight of zero.
+
+	scftorture.weight_single_wait= [KNL]
+			The probability weighting to use for the
+			smp_call_function_single() function with a
+			non-zero "wait" parameter.  See weight_single.
+
+	scftorture.weight_many= [KNL]
+			The probability weighting to use for the
+			smp_call_function_many() function with a zero
+			"wait" parameter.  See weight_single.
+			Note well that setting a high probability for
+			this weighting can place serious IPI load
+			on the system.
+
+	scftorture.weight_many_wait= [KNL]
+			The probability weighting to use for the
+			smp_call_function_many() function with a
+			non-zero "wait" parameter.  See weight_single
+			and weight_many.
+
+	scftorture.weight_all= [KNL]
+			The probability weighting to use for the
+			smp_call_function_all() function with a zero
+			"wait" parameter.  See weight_single and
+			weight_many.
+
+	scftorture.weight_all_wait= [KNL]
+			The probability weighting to use for the
+			smp_call_function_all() function with a
+			non-zero "wait" parameter.  See weight_single
+			and weight_many.
+
 	skew_tick=	[KNL] Offset the periodic timer tick per cpu to mitigate
 			xtime_lock contention on larger systems, and/or RCU lock
 			contention on all systems with CONFIG_MAXSMP set.
@@ -5828,6 +5977,21 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.event_eoi_delay=	[XEN]
+			How long to delay EOI handling in case of event
+			storms (jiffies). Default is 10.
+
+	xen.event_loop_timeout=	[XEN]
+			After which time (jiffies) the event handling loop
+			should start to delay EOI handling. Default is 2.
+
+	xen.fifo_events=	[XEN]
+			Boolean parameter to disable using fifo event handling
+			even if available. Normally fifo event handling is
+			preferred over the 2-level event handling, as it is
+			fairer and the number of possible event channels is
+			much higher. Default is on (use fifo events).
+
 	nopv=		[X86,XEN,KVM,HYPER_V,VMWARE]
 			Disables the PV optimizations forcing the guest to run
 			as generic guest with no PV drivers. Currently support
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
index 4fb4ce56df7c..9f7b619f35f7 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
@@ -20,13 +20,13 @@ dvb-usb-dvbsky cards list
      - 0572:0320
    * - DVBSky T680CI
      - 0572:680c
-   * - MyGica Mini DVB-T2 USB Stick T230
+   * - MyGica Mini DVB-(T/T2/C) USB Stick T230
      - 0572:c688
-   * - MyGica Mini DVB-T2 USB Stick T230C
+   * - MyGica Mini DVB-(T/T2/C) USB Stick T230C
      - 0572:c689
-   * - MyGica Mini DVB-T2 USB Stick T230C Lite
+   * - MyGica Mini DVB-(T/T2/C) USB Stick T230C Lite
      - 0572:c699
-   * - MyGica Mini DVB-T2 USB Stick T230C v2
+   * - MyGica Mini DVB-(T/T2/C) USB Stick T230C v2
      - 0572:c68a
    * - TechnoTrend TT-connect CT2-4650 CI
      - 0b48:3012
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
index f01f9df1e249..e39bc8e4bffe 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
@@ -40,6 +40,10 @@ dvb-usb-dw2102 cards list
      - 0b48:3011
    * - TerraTec Cinergy S USB
      - 0ccd:0064
+   * - Terratec Cinergy S2 PCIe Dual Port 1
+     - 153b:1181
+   * - Terratec Cinergy S2 PCIe Dual Port 2
+     - 153b:1182
    * - Terratec Cinergy S2 USB BOX
      - 0ccd:0x0105
    * - Terratec Cinergy S2 USB HD
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/em28xx-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/em28xx-cardlist.rst
index a5f0e6d22a1a..ace65718ea22 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/em28xx-cardlist.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/em28xx-cardlist.rst
@@ -434,3 +434,7 @@ EM28xx cards list
      - PCTV DVB-S2 Stick (461e v2)
      - em28178
      - 2013:0461, 2013:0259
+   * - 105
+     - MyGica iGrabber
+     - em2860
+     - 1f4d:1abe
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/ipu3.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/ipu3.rst
index 9361c34f123e..07d139bf8459 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/ipu3.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/ipu3.rst
@@ -89,41 +89,41 @@ Let us take the example of ov5670 sensor connected to CSI2 port 0, for a
 Using the media contorller APIs, the ov5670 sensor is configured to send
 frames in packed raw Bayer format to IPU3 CSI2 receiver.
 
-# This example assumes /dev/media0 as the CIO2 media device
-
-export MDEV=/dev/media0
-
-# and that ov5670 sensor is connected to i2c bus 10 with address 0x36
-
-export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036")
+.. code-block:: none
 
-# Establish the link for the media devices using media-ctl [#f3]_
-media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]"
+    # This example assumes /dev/media0 as the CIO2 media device
+    export MDEV=/dev/media0
 
-# Set the format for the media devices
-media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]"
+    # and that ov5670 sensor is connected to i2c bus 10 with address 0x36
+    export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036")
 
-media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]"
+    # Establish the link for the media devices using media-ctl [#f3]_
+    media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]"
 
-media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]"
+    # Set the format for the media devices
+    media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]"
+    media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]"
+    media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]"
 
 Once the media pipeline is configured, desired sensor specific settings
 (such as exposure and gain settings) can be set, using the yavta tool.
 
 e.g
 
-yavta -w 0x009e0903 444 $SDEV
-
-yavta -w 0x009e0913 1024 $SDEV
+.. code-block:: none
 
-yavta -w 0x009e0911 2046 $SDEV
+    yavta -w 0x009e0903 444 $SDEV
+    yavta -w 0x009e0913 1024 $SDEV
+    yavta -w 0x009e0911 2046 $SDEV
 
 Once the desired sensor settings are set, frame captures can be done as below.
 
 e.g
 
-yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \
-      -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0")
+.. code-block:: none
+
+    yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \
+          -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0")
 
 With the above command, 10 frames are captured at 2592x1944 resolution, with
 sGRBG10 format and output as IPU3_SGRBG10 format.
@@ -269,21 +269,21 @@ all the video nodes setup correctly.
 
 Let us take "ipu3-imgu 0" subdev as an example.
 
-media-ctl -d $MDEV -r
-
-media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1]
+.. code-block:: none
 
-media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1]
+    media-ctl -d $MDEV -r
+    media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1]
+    media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1]
+    media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1]
+    media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1]
 
 Also the pipe mode of the corresponding V4L2 subdev should be set as desired
 (e.g 0 for video mode or 1 for still mode) through the control id 0x009819a1 as
 below.
 
-yavta -w "0x009819A1 1" /dev/v4l-subdev7
+.. code-block:: none
+
+    yavta -w "0x009819A1 1" /dev/v4l-subdev7
 
 Certain hardware blocks in ImgU pipeline can change the frame resolution by
 cropping or scaling, these hardware blocks include Input Feeder(IF), Bayer Down
@@ -371,30 +371,32 @@ v4l2n command can be used. This helps process the raw Bayer frames and produces
 the desired results for the main output image and the viewfinder output, in NV12
 format.
 
-v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
---fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069
---reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out
---open=/dev/video5
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf
---open=/dev/video6
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7
---output=/tmp/frames.3A --fmt=type:META_CAPTURE,?
---reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
+.. code-block:: none
+
+    v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
+          --fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069 \
+          --reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 \
+          --output=/tmp/frames.out --open=/dev/video5 \
+          --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 \
+          --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 \
+          --output=/tmp/frames.vf --open=/dev/video6 \
+          --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 \
+          --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7 \
+          --output=/tmp/frames.3A --fmt=type:META_CAPTURE,? \
+          --reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
 
 You can also use yavta [#f2]_ command to do same thing as above:
 
 .. code-block:: none
 
-	yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
-	--file=frame-#.out-f NV12 /dev/video5 & \
-	yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
-	--file=frame-#.vf -f NV12 /dev/video6 & \
-	yavta --data-prefix -Bmeta-capture -c10 -n5 -I \
-	--file=frame-#.3a /dev/video7 & \
-	yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \
-	--file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4
+    yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+          --file=frame-#.out-f NV12 /dev/video5 & \
+    yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+          --file=frame-#.vf -f NV12 /dev/video6 & \
+    yavta --data-prefix -Bmeta-capture -c10 -n5 -I \
+          --file=frame-#.3a /dev/video7 & \
+    yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \
+          --file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4
 
 where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to
 input, output, viewfinder and 3A statistics video nodes respectively.
@@ -408,7 +410,9 @@ as below.
 Main output frames
 ~~~~~~~~~~~~~~~~~~
 
-raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm
+.. code-block:: none
+
+    raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm
 
 where 2560x1920 is output resolution, NV12 is the video format, followed
 by input frame and output PNM file.
@@ -416,7 +420,9 @@ by input frame and output PNM file.
 Viewfinder output frames
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
-raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm
+.. code-block:: none
+
+    raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm
 
 where 2560x1920 is output resolution, NV12 is the video format, followed
 by input frame and output PNM file.
@@ -482,63 +488,63 @@ Name			 Description
 Optical Black Correction Optical Black Correction block subtracts a pre-defined
 			 value from the respective pixel values to obtain better
 			 image quality.
-			 Defined in :c:type:`ipu3_uapi_obgrid_param`.
+			 Defined in struct ipu3_uapi_obgrid_param.
 Linearization		 This algo block uses linearization parameters to
 			 address non-linearity sensor effects. The Lookup table
 			 table is defined in
-			 :c:type:`ipu3_uapi_isp_lin_vmem_params`.
+			 struct ipu3_uapi_isp_lin_vmem_params.
 SHD			 Lens shading correction is used to correct spatial
 			 non-uniformity of the pixel response due to optical
 			 lens shading. This is done by applying a different gain
 			 for each pixel. The gain, black level etc are
-			 configured in :c:type:`ipu3_uapi_shd_config_static`.
+			 configured in struct ipu3_uapi_shd_config_static.
 BNR			 Bayer noise reduction block removes image noise by
 			 applying a bilateral filter.
-			 See :c:type:`ipu3_uapi_bnr_static_config` for details.
+			 See struct ipu3_uapi_bnr_static_config for details.
 ANR			 Advanced Noise Reduction is a block based algorithm
 			 that performs noise reduction in the Bayer domain. The
 			 convolution matrix etc can be found in
-			 :c:type:`ipu3_uapi_anr_config`.
+			 struct ipu3_uapi_anr_config.
 DM			 Demosaicing converts raw sensor data in Bayer format
 			 into RGB (Red, Green, Blue) presentation. Then add
 			 outputs of estimation of Y channel for following stream
 			 processing by Firmware. The struct is defined as
-			 :c:type:`ipu3_uapi_dm_config`.
+			 struct ipu3_uapi_dm_config.
 Color Correction	 Color Correction algo transforms sensor specific color
 			 space to the standard "sRGB" color space. This is done
 			 by applying 3x3 matrix defined in
-			 :c:type:`ipu3_uapi_ccm_mat_config`.
-Gamma correction	 Gamma correction :c:type:`ipu3_uapi_gamma_config` is a
+			 struct ipu3_uapi_ccm_mat_config.
+Gamma correction	 Gamma correction struct ipu3_uapi_gamma_config is a
 			 basic non-linear tone mapping correction that is
 			 applied per pixel for each pixel component.
 CSC			 Color space conversion transforms each pixel from the
 			 RGB primary presentation to YUV (Y: brightness,
 			 UV: Luminance) presentation. This is done by applying
 			 a 3x3 matrix defined in
-			 :c:type:`ipu3_uapi_csc_mat_config`
+			 struct ipu3_uapi_csc_mat_config
 CDS			 Chroma down sampling
 			 After the CSC is performed, the Chroma Down Sampling
 			 is applied for a UV plane down sampling by a factor
 			 of 2 in each direction for YUV 4:2:0 using a 4x2
-			 configurable filter :c:type:`ipu3_uapi_cds_params`.
+			 configurable filter struct ipu3_uapi_cds_params.
 CHNR			 Chroma noise reduction
 			 This block processes only the chrominance pixels and
 			 performs noise reduction by cleaning the high
 			 frequency noise.
-			 See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`.
+			 See struct struct ipu3_uapi_yuvp1_chnr_config.
 TCC			 Total color correction as defined in struct
-			 :c:type:`ipu3_uapi_yuvp2_tcc_static_config`.
+			 struct ipu3_uapi_yuvp2_tcc_static_config.
 XNR3			 eXtreme Noise Reduction V3 is the third revision of
 			 noise reduction algorithm used to improve image
 			 quality. This removes the low frequency noise in the
 			 captured image. Two related structs are  being defined,
-			 :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data memory
-			 and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for vector
+			 struct ipu3_uapi_isp_xnr3_params for ISP data memory
+			 and struct ipu3_uapi_isp_xnr3_vmem_params for vector
 			 memory.
 TNR			 Temporal Noise Reduction block compares successive
 			 frames in time to remove anomalies / noise in pixel
-			 values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params` and
-			 :c:type:`ipu3_uapi_isp_tnr3_params` are defined for ISP
+			 values. struct ipu3_uapi_isp_tnr3_vmem_params and
+			 struct ipu3_uapi_isp_tnr3_params are defined for ISP
 			 vector and data memory respectively.
 ======================== =======================================================
 
@@ -570,9 +576,9 @@ processor, while many others will use a set of fixed hardware blocks also
 called accelerator cluster (ACC) to crunch pixel data and produce statistics.
 
 ACC parameters of individual algorithms, as defined by
-:c:type:`ipu3_uapi_acc_param`, can be chosen to be applied by the user
-space through struct :c:type:`ipu3_uapi_flags` embedded in
-:c:type:`ipu3_uapi_params` structure. For parameters that are configured as
+struct ipu3_uapi_acc_param, can be chosen to be applied by the user
+space through struct struct ipu3_uapi_flags embedded in
+struct ipu3_uapi_params structure. For parameters that are configured as
 not enabled by the user space, the corresponding structs are ignored by the
 driver, in which case the existing configuration of the algorithm will be
 preserved.
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/pci-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/pci-cardlist.rst
index 434fe996b541..f4d670e632f8 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/pci-cardlist.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/pci-cardlist.rst
@@ -90,6 +90,7 @@ sta2x11_vip       STA2X11 VIP Video For Linux
 tw5864            Techwell TW5864 video/audio grabber and encoder
 tw686x            Intersil/Techwell TW686x
 tw68              Techwell tw68x Video For Linux
+zoran             Zoran-36057/36067 JPEG codec
 ================  ========================================================
 
 Some of those drivers support multiple devices, as shown at the card
@@ -105,3 +106,4 @@ lists below:
 	ivtv-cardlist
 	saa7134-cardlist
 	saa7164-cardlist
+	zoran-cardlist
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/rkisp1.dot linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/rkisp1.dot
new file mode 100644
index 000000000000..54c1953a6130
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/rkisp1.dot
@@ -0,0 +1,18 @@
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0 | <port1> 1} | rkisp1_isp\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port2 -> n00000006:port0
+	n00000001:port2 -> n00000009:port0
+	n00000001:port3 -> n00000014 [style=bold]
+	n00000006 [label="{{<port0> 0} | rkisp1_resizer_mainpath\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000006:port1 -> n0000000c [style=bold]
+	n00000009 [label="{{<port0> 0} | rkisp1_resizer_selfpath\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000009:port1 -> n00000010 [style=bold]
+	n0000000c [label="rkisp1_mainpath\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n00000010 [label="rkisp1_selfpath\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n00000014 [label="rkisp1_stats\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n00000018 [label="rkisp1_params\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+	n00000018 -> n00000001:port1 [style=bold]
+	n0000001c [label="{{} | imx219 4-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000001c:port0 -> n00000001:port0
+}
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/rkisp1.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/rkisp1.rst
new file mode 100644
index 000000000000..42e37ed255f6
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/rkisp1.rst
@@ -0,0 +1,181 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+=========================================
+Rockchip Image Signal Processor (rkisp1)
+=========================================
+
+Introduction
+============
+
+This file documents the driver for the Rockchip ISP1 that is part of RK3288
+and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1
+and uses the Media-Controller API.
+
+Topology
+========
+.. _rkisp1_topology_graph:
+
+.. kernel-figure:: rkisp1.dot
+    :alt:   Diagram of the default media pipeline topology
+    :align: center
+
+
+The driver has 4 video devices:
+
+- rkisp1_mainpath: capture device for retrieving images, usually in higher
+  resolution.
+- rkisp1_selfpath: capture device for retrieving images.
+- rkisp1_stats: a metadata capture device that sends statistics.
+- rkisp1_params: a metadata output device that receives parameters
+  configurations from userspace.
+
+The driver has 3 subdevices:
+
+- rkisp1_resizer_mainpath: used to resize and downsample frames for the
+  mainpath capture device.
+- rkisp1_resizer_selfpath: used to resize and downsample frames for the
+  selfpath capture device.
+- rkisp1_isp: is connected to the sensor and is responsible for all the isp
+  operations.
+
+
+rkisp1_mainpath, rkisp1_selfpath - Frames Capture Video Nodes
+-------------------------------------------------------------
+Those are the `mainpath` and `selfpath` capture devices to capture frames.
+Those entities are the DMA engines that write the frames to memory.
+The selfpath video device can capture YUV/RGB formats. Its input is YUV encoded
+stream and it is able to convert it to RGB. The selfpath is not able to
+capture bayer formats.
+The mainpath can capture both bayer and YUV formats but it is not able to
+capture RGB formats.
+Both capture videos support
+the ``V4L2_CAP_IO_MC`` :ref:`capability <device-capabilities>`.
+
+
+rkisp1_resizer_mainpath, rkisp1_resizer_selfpath - Resizers Subdevices Nodes
+----------------------------------------------------------------------------
+Those are resizer entities for the mainpath and the selfpath. Those entities
+can scale the frames up and down and also change the YUV sampling (for example
+YUV4:2:2 -> YUV4:2:0). They also have cropping capability on the sink pad.
+The resizers entities can only operate on YUV:4:2:2 format
+(MEDIA_BUS_FMT_YUYV8_2X8).
+The mainpath capture device supports capturing video in bayer formats. In that
+case the resizer of the mainpath is set to 'bypass' mode - it just forward the
+frame without operating on it.
+
+rkisp1_isp - Image Signal Processing Subdevice Node
+---------------------------------------------------
+This is the isp entity. It is connected to the sensor on sink pad 0 and
+receives the frames using the CSI-2 protocol. It is responsible of configuring
+the CSI-2 protocol. It has a cropping capability on sink pad 0 that is
+connected to the sensor and on source pad 2 connected to the resizer entities.
+Cropping on sink pad 0 defines the image region from the sensor.
+Cropping on source pad 2 defines the region for the Image Stabilizer (IS).
+
+.. _rkisp1_stats:
+
+rkisp1_stats - Statistics Video Node
+------------------------------------
+The statistics video node outputs the 3A (auto focus, auto exposure and auto
+white balance) statistics, and also histogram statistics for the frames that
+are being processed by the rkisp1 to userspace applications.
+Using these data, applications can implement algorithms and re-parameterize
+the driver through the rkisp_params node to improve image quality during a
+video stream.
+The buffer format is defined by struct :c:type:`rkisp1_stat_buffer`, and
+userspace should set
+:ref:`V4L2_META_FMT_RK_ISP1_STAT_3A <v4l2-meta-fmt-stat-rkisp1>` as the
+dataformat.
+
+.. _rkisp1_params:
+
+rkisp1_params - Parameters Video Node
+-------------------------------------
+The rkisp1_params video node receives a set of parameters from userspace
+to be applied to the hardware during a video stream, allowing userspace
+to dynamically modify values such as black level, cross talk corrections
+and others.
+
+The buffer format is defined by struct :c:type:`rkisp1_params_cfg`, and
+userspace should set
+:ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-params-rkisp1>` as the
+dataformat.
+
+
+Capturing Video Frames Example
+==============================
+
+In the following example, the sensor connected to pad 0 of 'rkisp1_isp' is
+imx219.
+
+The following commands can be used to capture video from the selfpath video
+node with dimension 900x800 planar format YUV 4:2:2. It uses all cropping
+capabilities possible, (see explanation right below)
+
+.. code-block:: bash
+
+	# set the links
+	"media-ctl" "-d" "platform:rkisp1" "-r"
+	"media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]"
+	"media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]"
+	"media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [0]"
+
+	# set format for imx219 4-0010:0
+	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]'
+
+	# set format for rkisp1_isp pads:
+	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]'
+	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]'
+
+	# set format for rkisp1_resizer_selfpath pads:
+	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
+	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 [fmt:YUYV8_2X8/900x800]'
+
+	# set format for rkisp1_selfpath:
+	"v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "width=900,height=800,"
+	"v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "pixelformat=422P"
+
+	# start streaming:
+	v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" "--stream-count" "10"
+
+
+In the above example the sensor is configured to bayer format:
+`SRGGB10_1X10/1640x1232`. The rkisp1_isp:0 pad should be configured to the
+same mbus format and dimensions as the sensor, otherwise streaming will fail
+with 'EPIPE' error. So it is also configured to `SRGGB10_1X10/1640x1232`.
+In addition, the rkisp1_isp:0 pad is configured to cropping `(0,0)/1600x1200`.
+
+The cropping dimensions are automatically propagated to be the format of the
+isp source pad `rkisp1_isp:2`. Another cropping operation is configured on
+the isp source pad: `(0,0)/1500x1100`.
+
+The resizer's sink pad `rkisp1_resizer_selfpath` should be configured to format
+`YUYV8_2X8/1500x1100` in order to match the format on the other side of the
+link. In addition a cropping `(300,400)/1400x1000` is configured on it.
+
+The source pad of the resizer, `rkisp1_resizer_selfpath:1` is configured to
+format `YUYV8_2X8/900x800`. That means that the resizer first crop a window
+of `(300,400)/1400x100` from the received frame and then scales this window
+to dimension `900x800`.
+
+Note that the above example does not uses the stats-params control loop.
+Therefore the capture frames will not go through the 3A algorithms and
+probably won't have a good quality, and can even look dark and greenish.
+
+Configuring Quantization
+========================
+
+The driver supports limited and full range quantization on YUV formats,
+where limited is the default.
+To switch between one or the other, userspace should use the Colorspace
+Conversion API (CSC) for subdevices on source pad 2 of the
+isp (`rkisp1_isp:2`). The quantization configured on this pad is the
+quantization of the captured video frames on the mainpath and selfpath
+video nodes.
+Note that the resizer and capture entities will always report
+``V4L2_QUANTIZATION_DEFAULT`` even if the quantization is configured to full
+range on `rkisp1_isp:2`. So in order to get the configured quantization,
+application should get it from pad `rkisp1_isp:2`.
+
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/siano-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/siano-cardlist.rst
index d387c04d753c..bb731a953878 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/siano-cardlist.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/siano-cardlist.rst
@@ -20,7 +20,7 @@ Siano cards list
      - 2040:1801
    * - Hauppauge WinTV MiniCard
      - 2040:2000, 2040:200a, 2040:2010, 2040:2011, 2040:2019
-   * - Hauppauge WinTV MiniCard
+   * - Hauppauge WinTV MiniCard Rev 2
      - 2040:2009
    * - Hauppauge WinTV MiniStick
      - 2040:5500, 2040:5510, 2040:5520, 2040:5530, 2040:5580, 2040:5590, 2040:b900, 2040:b910, 2040:b980, 2040:b990, 2040:c000, 2040:c010, 2040:c080, 2040:c090, 2040:c0a0, 2040:f5a0
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/usb-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/usb-cardlist.rst
index 546fd40da4c3..1e96f928e0af 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/usb-cardlist.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/usb-cardlist.rst
@@ -112,7 +112,6 @@ zr364xx                 USB ZR364XX Camera
 	em28xx-cardlist
 	tm6000-cardlist
 	siano-cardlist
-	usbvision-cardlist
 
 	gspca-cardlist
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/usbvision-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/usbvision-cardlist.rst
deleted file mode 100644
index 6aee115ee6e2..000000000000
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/usbvision-cardlist.rst
+++ /dev/null
@@ -1,283 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-USBvision cards list
-====================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - USB IDs
-
-   * - 0
-     - Xanboo
-     - 0a6f:0400
-
-   * - 1
-     - Belkin USB VideoBus II Adapter
-     - 050d:0106
-
-   * - 2
-     - Belkin Components USB VideoBus
-     - 050d:0207
-
-   * - 3
-     - Belkin USB VideoBus II
-     - 050d:0208
-
-   * - 4
-     - echoFX InterView Lite
-     - 0571:0002
-
-   * - 5
-     - USBGear USBG-V1 resp. HAMA USB
-     - 0573:0003
-
-   * - 6
-     - D-Link V100
-     - 0573:0400
-
-   * - 7
-     - X10 USB Camera
-     - 0573:2000
-
-   * - 8
-     - Hauppauge WinTV USB Live (PAL B/G)
-     - 0573:2d00
-
-   * - 9
-     - Hauppauge WinTV USB Live Pro (NTSC M/N)
-     - 0573:2d01
-
-   * - 10
-     - Zoran Co. PMD (Nogatech) AV-grabber Manhattan
-     - 0573:2101
-
-   * - 11
-     - Nogatech USB-TV (NTSC) FM
-     - 0573:4100
-
-   * - 12
-     - PNY USB-TV (NTSC) FM
-     - 0573:4110
-
-   * - 13
-     - PixelView PlayTv-USB PRO (PAL) FM
-     - 0573:4450
-
-   * - 14
-     - ZTV ZT-721 2.4GHz USB A/V Receiver
-     - 0573:4550
-
-   * - 15
-     - Hauppauge WinTV USB (NTSC M/N)
-     - 0573:4d00
-
-   * - 16
-     - Hauppauge WinTV USB (PAL B/G)
-     - 0573:4d01
-
-   * - 17
-     - Hauppauge WinTV USB (PAL I)
-     - 0573:4d02
-
-   * - 18
-     - Hauppauge WinTV USB (PAL/SECAM L)
-     - 0573:4d03
-
-   * - 19
-     - Hauppauge WinTV USB (PAL D/K)
-     - 0573:4d04
-
-   * - 20
-     - Hauppauge WinTV USB (NTSC FM)
-     - 0573:4d10
-
-   * - 21
-     - Hauppauge WinTV USB (PAL B/G FM)
-     - 0573:4d11
-
-   * - 22
-     - Hauppauge WinTV USB (PAL I FM)
-     - 0573:4d12
-
-   * - 23
-     - Hauppauge WinTV USB (PAL D/K FM)
-     - 0573:4d14
-
-   * - 24
-     - Hauppauge WinTV USB Pro (NTSC M/N)
-     - 0573:4d2a
-
-   * - 25
-     - Hauppauge WinTV USB Pro (NTSC M/N) V2
-     - 0573:4d2b
-
-   * - 26
-     - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)
-     - 0573:4d2c
-
-   * - 27
-     - Hauppauge WinTV USB Pro (NTSC M/N) V3
-     - 0573:4d20
-
-   * - 28
-     - Hauppauge WinTV USB Pro (PAL B/G)
-     - 0573:4d21
-
-   * - 29
-     - Hauppauge WinTV USB Pro (PAL I)
-     - 0573:4d22
-
-   * - 30
-     - Hauppauge WinTV USB Pro (PAL/SECAM L)
-     - 0573:4d23
-
-   * - 31
-     - Hauppauge WinTV USB Pro (PAL D/K)
-     - 0573:4d24
-
-   * - 32
-     - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)
-     - 0573:4d25
-
-   * - 33
-     - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2
-     - 0573:4d26
-
-   * - 34
-     - Hauppauge WinTV USB Pro (PAL B/G) V2
-     - 0573:4d27
-
-   * - 35
-     - Hauppauge WinTV USB Pro (PAL B/G,D/K)
-     - 0573:4d28
-
-   * - 36
-     - Hauppauge WinTV USB Pro (PAL I,D/K)
-     - 0573:4d29
-
-   * - 37
-     - Hauppauge WinTV USB Pro (NTSC M/N FM)
-     - 0573:4d30
-
-   * - 38
-     - Hauppauge WinTV USB Pro (PAL B/G FM)
-     - 0573:4d31
-
-   * - 39
-     - Hauppauge WinTV USB Pro (PAL I FM)
-     - 0573:4d32
-
-   * - 40
-     - Hauppauge WinTV USB Pro (PAL D/K FM)
-     - 0573:4d34
-
-   * - 41
-     - Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)
-     - 0573:4d35
-
-   * - 42
-     - Hauppauge WinTV USB Pro (Temic PAL B/G FM)
-     - 0573:4d36
-
-   * - 43
-     - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)
-     - 0573:4d37
-
-   * - 44
-     - Hauppauge WinTV USB Pro (NTSC M/N FM) V2
-     - 0573:4d38
-
-   * - 45
-     - Camtel Technology USB TV Genie Pro FM Model TVB330
-     - 0768:0006
-
-   * - 46
-     - Digital Video Creator I
-     - 07d0:0001
-
-   * - 47
-     - Global Village GV-007 (NTSC)
-     - 07d0:0002
-
-   * - 48
-     - Dazzle Fusion Model DVC-50 Rev 1 (NTSC)
-     - 07d0:0003
-
-   * - 49
-     - Dazzle Fusion Model DVC-80 Rev 1 (PAL)
-     - 07d0:0004
-
-   * - 50
-     - Dazzle Fusion Model DVC-90 Rev 1 (SECAM)
-     - 07d0:0005
-
-   * - 51
-     - Eskape Labs MyTV2Go
-     - 07f8:9104
-
-   * - 52
-     - Pinnacle Studio PCTV USB (PAL)
-     - 2304:010d
-
-   * - 53
-     - Pinnacle Studio PCTV USB (SECAM)
-     - 2304:0109
-
-   * - 54
-     - Pinnacle Studio PCTV USB (PAL) FM
-     - 2304:0110
-
-   * - 55
-     - Miro PCTV USB
-     - 2304:0111
-
-   * - 56
-     - Pinnacle Studio PCTV USB (NTSC) FM
-     - 2304:0112
-
-   * - 57
-     - Pinnacle Studio PCTV USB (PAL) FM V2
-     - 2304:0210
-
-   * - 58
-     - Pinnacle Studio PCTV USB (NTSC) FM V2
-     - 2304:0212
-
-   * - 59
-     - Pinnacle Studio PCTV USB (PAL) FM V3
-     - 2304:0214
-
-   * - 60
-     - Pinnacle Studio Linx Video input cable (NTSC)
-     - 2304:0300
-
-   * - 61
-     - Pinnacle Studio Linx Video input cable (PAL)
-     - 2304:0301
-
-   * - 62
-     - Pinnacle PCTV Bungee USB (PAL) FM
-     - 2304:0419
-
-   * - 63
-     - Hauppauge WinTv-USB
-     - 2400:4200
-
-   * - 64
-     - Pinnacle Studio PCTV USB (NTSC) FM V3
-     - 2304:0113
-
-   * - 65
-     - Nogatech USB MicroCam NTSC (NV3000N)
-     - 0573:3000
-
-   * - 66
-     - Nogatech USB MicroCam PAL (NV3001P)
-     - 0573:3001
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/v4l-drivers.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/v4l-drivers.rst
index 251cc4ede0b6..9c7ebe2ca3bd 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/media/v4l-drivers.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/v4l-drivers.rst
@@ -25,6 +25,7 @@ Video4Linux (V4L) driver-specific documentation
 	philips
 	qcom_camss
 	rcar-fdp1
+	rkisp1
 	saa7134
 	si470x
 	si4713
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/media/zoran-cardlist.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/zoran-cardlist.rst
new file mode 100644
index 000000000000..d7fc8bed62ff
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/media/zoran-cardlist.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Zoran cards list
+================
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+   :header-rows: 1
+   :widths: 2 19 18
+   :stub-columns: 0
+
+   * - Card number
+     - Card name
+     - PCI subsystem IDs
+
+   * - 0
+     - DC10(old)
+     - <any>
+
+   * - 1
+     - DC10(new)
+     - <any>
+
+   * - 2
+     - DC10_PLUS
+     - 1031:7efe
+
+   * - 3
+     - DC30
+     - <any>
+
+   * - 4
+     - DC30_PLUS
+     - 1031:d801
+
+   * - 5
+     - LML33
+     - <any>
+
+   * - 6
+     - LML33R10
+     - 12f8:8a02
+
+   * - 7
+     - Buz
+     - 13ca:4231
+
+   * - 8
+     - 6-Eyes
+     - <any>
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/mm/hugetlbpage.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/mm/hugetlbpage.rst
index 015a5f7d7854..f7b1c7462991 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/mm/hugetlbpage.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/mm/hugetlbpage.rst
@@ -131,7 +131,7 @@ hugepages
 	parameter is preceded by an invalid hugepagesz parameter, it will
 	be ignored.
 default_hugepagesz
-	pecify the default huge page size.  This parameter can
+	Specify the default huge page size.  This parameter can
 	only be specified once on the command line.  default_hugepagesz can
 	optionally be followed by the hugepages parameter to preallocate a
 	specific number of huge pages of default size.  The number of default
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/mm/numaperf.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/mm/numaperf.rst
index 4d69ef1de830..86f2a3c4b638 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/mm/numaperf.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/mm/numaperf.rst
@@ -56,6 +56,11 @@ nodes' access characteristics share the same performance relative to other
 linked initiator nodes. Each target within an initiator's access class,
 though, do not necessarily perform the same as each other.
 
+The access class "1" is used to allow differentiation between initiators
+that are CPUs and hence suitable for generic task scheduling, and
+IO initiators such as GPUs and NICs.  Unlike access class 0, only
+nodes containing CPUs are considered.
+
 ================
 NUMA Performance
 ================
@@ -88,6 +93,9 @@ The latency attributes are provided in nanoseconds.
 The values reported here correspond to the rated latency and bandwidth
 for the platform.
 
+Access class 1 takes the same form but only includes values for CPU to
+memory activity.
+
 ==========
 NUMA Cache
 ==========
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/nfs/fault_injection.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/nfs/fault_injection.rst
deleted file mode 100644
index eb029c0c15ce..000000000000
--- linux-libre-5.9-gnu/Documentation/admin-guide/nfs/fault_injection.rst
+++ /dev/null
@@ -1,70 +0,0 @@
-===================
-NFS Fault Injection
-===================
-
-Fault injection is a method for forcing errors that may not normally occur, or
-may be difficult to reproduce.  Forcing these errors in a controlled environment
-can help the developer find and fix bugs before their code is shipped in a
-production system.  Injecting an error on the Linux NFS server will allow us to
-observe how the client reacts and if it manages to recover its state correctly.
-
-NFSD_FAULT_INJECTION must be selected when configuring the kernel to use this
-feature.
-
-
-Using Fault Injection
-=====================
-On the client, mount the fault injection server through NFS v4.0+ and do some
-work over NFS (open files, take locks, ...).
-
-On the server, mount the debugfs filesystem to <debug_dir> and ls
-<debug_dir>/nfsd.  This will show a list of files that will be used for
-injecting faults on the NFS server.  As root, write a number n to the file
-corresponding to the action you want the server to take.  The server will then
-process the first n items it finds.  So if you want to forget 5 locks, echo '5'
-to <debug_dir>/nfsd/forget_locks.  A value of 0 will tell the server to forget
-all corresponding items.  A log message will be created containing the number
-of items forgotten (check dmesg).
-
-Go back to work on the client and check if the client recovered from the error
-correctly.
-
-
-Available Faults
-================
-forget_clients:
-     The NFS server keeps a list of clients that have placed a mount call.  If
-     this list is cleared, the server will have no knowledge of who the client
-     is, forcing the client to reauthenticate with the server.
-
-forget_openowners:
-     The NFS server keeps a list of what files are currently opened and who
-     they were opened by.  Clearing this list will force the client to reopen
-     its files.
-
-forget_locks:
-     The NFS server keeps a list of what files are currently locked in the VFS.
-     Clearing this list will force the client to reclaim its locks (files are
-     unlocked through the VFS as they are cleared from this list).
-
-forget_delegations:
-     A delegation is used to assure the client that a file, or part of a file,
-     has not changed since the delegation was awarded.  Clearing this list will
-     force the client to reacquire its delegation before accessing the file
-     again.
-
-recall_delegations:
-     Delegations can be recalled by the server when another client attempts to
-     access a file.  This test will notify the client that its delegation has
-     been revoked, forcing the client to reacquire the delegation before using
-     the file again.
-
-
-tools/nfs/inject_faults.sh script
-=================================
-This script has been created to ease the fault injection process.  This script
-will detect the mounted debugfs directory and write to the files located there
-based on the arguments passed by the user.  For example, running
-`inject_faults.sh forget_locks 1` as root will instruct the server to forget
-one lock.  Running `inject_faults forget_locks` will instruct the server to
-forgetall locks.
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/nfs/index.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/nfs/index.rst
index 6b5a3c90fac5..3601a708f333 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/nfs/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/nfs/index.rst
@@ -12,4 +12,3 @@ NFS
     nfs-idmapper
     pnfs-block-server
     pnfs-scsi-server
-    fault_injection
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/perf/arm-cmn.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/perf/arm-cmn.rst
new file mode 100644
index 000000000000..0e4809346014
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/perf/arm-cmn.rst
@@ -0,0 +1,65 @@
+=============================
+Arm Coherent Mesh Network PMU
+=============================
+
+CMN-600 is a configurable mesh interconnect consisting of a rectangular
+grid of crosspoints (XPs), with each crosspoint supporting up to two
+device ports to which various AMBA CHI agents are attached.
+
+CMN implements a distributed PMU design as part of its debug and trace
+functionality. This consists of a local monitor (DTM) at every XP, which
+counts up to 4 event signals from the connected device nodes and/or the
+XP itself. Overflow from these local counters is accumulated in up to 8
+global counters implemented by the main controller (DTC), which provides
+overall PMU control and interrupts for global counter overflow.
+
+PMU events
+----------
+
+The PMU driver registers a single PMU device for the whole interconnect,
+see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link
+more than one CMN together via external CCIX links - in this situation,
+each mesh counts its own events entirely independently, and additional
+PMU devices will be named arm_cmn_{1..n}.
+
+Most events are specified in a format based directly on the TRM
+definitions - "type" selects the respective node type, and "eventid" the
+event number. Some events require an additional occupancy ID, which is
+specified by "occupid".
+
+* Since RN-D nodes do not have any distinct events from RN-I nodes, they
+  are treated as the same type (0xa), and the common event templates are
+  named "rnid_*".
+
+* The cycle counter is treated as a synthetic event belonging to the DTC
+  node ("type" == 0x3, "eventid" is ignored).
+
+* XP events also encode the port and channel in the "eventid" field, to
+  match the underlying pmu_event0_id encoding for the pmu_event_sel
+  register. The event templates are named with prefixes to cover all
+  permutations.
+
+By default each event provides an aggregate count over all nodes of the
+given type. To target a specific node, "bynodeid" must be set to 1 and
+"nodeid" to the appropriate value derived from the CMN configuration
+(as defined in the "Node ID Mapping" section of the TRM).
+
+Watchpoints
+-----------
+
+The PMU can also count watchpoint events to monitor specific flit
+traffic. Watchpoints are treated as a synthetic event type, and like PMU
+events can be global or targeted with a particular XP's "nodeid" value.
+Since the watchpoint direction is otherwise implicit in the underlying
+register selection, separate events are provided for flit uploads and
+downloads.
+
+The flit match value and mask are passed in config1 and config2 ("val"
+and "mask" respectively). "wp_dev_sel", "wp_chn_sel", "wp_grp" and
+"wp_exclusive" are specified per the TRM definitions for dtm_wp_config0.
+Where a watchpoint needs to match fields from both match groups on the
+REQ or SNP channel, it can be specified as two events - one for each
+group - with the same nonzero "combine" value. The count for such a
+pair of combined events will be attributed to the primary match.
+Watchpoint events with a "combine" value of 0 are considered independent
+and will count individually.
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/perf/index.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/perf/index.rst
index 47c99f40cc16..5a8f2529a033 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/perf/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/perf/index.rst
@@ -12,6 +12,7 @@ Performance monitor support
    qcom_l2_pmu
    qcom_l3_pmu
    arm-ccn
+   arm-cmn
    xgene-pmu
    arm_dsu_pmu
    thunderx2-pmu
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/pm/cpufreq.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pm/cpufreq.rst
index 368e612145d2..6adb7988e0eb 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/pm/cpufreq.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pm/cpufreq.rst
@@ -1,7 +1,6 @@
 .. SPDX-License-Identifier: GPL-2.0
 .. include:: <isonum.txt>
 
-.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>`
 .. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>`
 
 =======================
@@ -92,16 +91,16 @@ control the P-state of multiple CPUs at the same time and writing to it affects
 all of those CPUs simultaneously.
 
 Sets of CPUs sharing hardware P-state control interfaces are represented by
-``CPUFreq`` as |struct cpufreq_policy| objects.  For consistency,
-|struct cpufreq_policy| is also used when there is only one CPU in the given
+``CPUFreq`` as struct cpufreq_policy objects.  For consistency,
+struct cpufreq_policy is also used when there is only one CPU in the given
 set.
 
-The ``CPUFreq`` core maintains a pointer to a |struct cpufreq_policy| object for
+The ``CPUFreq`` core maintains a pointer to a struct cpufreq_policy object for
 every CPU in the system, including CPUs that are currently offline.  If multiple
 CPUs share the same hardware P-state control interface, all of the pointers
-corresponding to them point to the same |struct cpufreq_policy| object.
+corresponding to them point to the same struct cpufreq_policy object.
 
-``CPUFreq`` uses |struct cpufreq_policy| as its basic data type and the design
+``CPUFreq`` uses struct cpufreq_policy as its basic data type and the design
 of its user space interface is based on the policy concept.
 
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/pm/cpuidle.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pm/cpuidle.rst
index 6ebe163f9dfe..10fde58d0869 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/pm/cpuidle.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pm/cpuidle.rst
@@ -478,7 +478,7 @@ order to ask the hardware to enter that state.  Also, for each
 statistics of the given idle state.  That information is exposed by the kernel
 via ``sysfs``.
 
-For each CPU in the system, there is a :file:`/sys/devices/system/cpu<N>/cpuidle/`
+For each CPU in the system, there is a :file:`/sys/devices/system/cpu/cpu<N>/cpuidle/`
 directory in ``sysfs``, where the number ``<N>`` is assigned to the given
 CPU at the initialization time.  That directory contains a set of subdirectories
 called :file:`state0`, :file:`state1` and so on, up to the number of idle state
@@ -494,7 +494,7 @@ object corresponding to it, as follows:
 	residency.
 
 ``below``
-	Total number of times this idle state had been asked for, but cerainly
+	Total number of times this idle state had been asked for, but certainly
 	a deeper idle state would have been a better match for the observed idle
 	duration.
 
@@ -528,6 +528,10 @@ object corresponding to it, as follows:
 	Total number of times the hardware has been asked by the given CPU to
 	enter this idle state.
 
+``rejected``
+	Total number of times a request to enter this idle state on the given
+	CPU was rejected.
+
 The :file:`desc` and :file:`name` files both contain strings.  The difference
 between them is that the name is expected to be more concise, while the
 description may be longer and it may contain white space or special characters.
@@ -572,6 +576,11 @@ particular case.  For these reasons, the only reliable way to find out how
 much time has been spent by the hardware in different idle states supported by
 it is to use idle state residency counters in the hardware, if available.
 
+Generally, an interrupt received when trying to enter an idle state causes the
+idle state entry request to be rejected, in which case the ``CPUIdle`` driver
+may return an error code to indicate that this was the case. The :file:`usage`
+and :file:`rejected` files report the number of times the given idle state
+was entered successfully or rejected, respectively.
 
 .. _cpu-pm-qos:
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/pnp.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pnp.rst
index bab2d10631f0..3eda08191d13 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/pnp.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pnp.rst
@@ -281,10 +281,6 @@ ISAPNP drivers.  They should serve as a temporary solution only.
 
 They are as follows::
 
-	struct pnp_card *pnp_find_card(unsigned short vendor,
-				       unsigned short device,
-				       struct pnp_card *from)
-
 	struct pnp_dev *pnp_find_dev(struct pnp_card *card,
 				     unsigned short vendor,
 				     unsigned short function,
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/pstore-blk.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pstore-blk.rst
index 296d5027787a..6898aba9fb5c 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/pstore-blk.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/pstore-blk.rst
@@ -154,17 +154,11 @@ Configurations for driver
 Only a block device driver cares about these configurations. A block device
 driver uses ``register_pstore_blk`` to register to pstore/blk.
 
-.. kernel-doc:: fs/pstore/blk.c
-   :identifiers: register_pstore_blk
-
 A non-block device driver uses ``register_pstore_device`` with
 ``struct pstore_device_info`` to register to pstore/blk.
 
 .. kernel-doc:: fs/pstore/blk.c
-   :identifiers: register_pstore_device
-
-.. kernel-doc:: include/linux/pstore_blk.h
-   :identifiers: pstore_device_info
+   :export:
 
 Compression and header
 ----------------------
@@ -237,7 +231,7 @@ For developer reference, here are all the important structures and APIs:
    :internal:
 
 .. kernel-doc:: fs/pstore/blk.c
-   :export:
+   :internal:
 
 .. kernel-doc:: include/linux/pstore_blk.h
    :internal:
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/svga.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/svga.rst
index b6c2f9acca92..9eb1e0738e84 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/svga.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/svga.rst
@@ -12,7 +12,8 @@ Intro
 This small document describes the "Video Mode Selection" feature which
 allows the use of various special video modes supported by the video BIOS. Due
 to usage of the BIOS, the selection is limited to boot time (before the
-kernel decompression starts) and works only on 80X86 machines.
+kernel decompression starts) and works only on 80X86 machines that are
+booted through BIOS firmware (as opposed to through UEFI, kexec, etc.).
 
 .. note::
 
@@ -23,7 +24,7 @@ kernel decompression starts) and works only on 80X86 machines.
 
 The video mode to be used is selected by a kernel parameter which can be
 specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..."
-option of LILO (or some other boot loader you use) or by the "vidmode" utility
+option of LILO (or some other boot loader you use) or by the "xrandr" utility
 (present in standard Linux utility packages). You can use the following values
 of this parameter::
 
@@ -41,7 +42,7 @@ of this parameter::
       better to use absolute mode numbers instead.
 
    0x.... - Hexadecimal video mode ID (also displayed on the menu, see below
-      for exact meaning of the ID). Warning: rdev and LILO don't support
+      for exact meaning of the ID). Warning: LILO doesn't support
       hexadecimal numbers -- you have to convert it to decimal manually.
 
 Menu
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/sysctl/abi.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysctl/abi.rst
index 599bcde7f0b7..ac87eafdb54f 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/sysctl/abi.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysctl/abi.rst
@@ -1,67 +1,34 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
 ================================
 Documentation for /proc/sys/abi/
 ================================
 
-kernel version 2.6.0.test2
+.. See scripts/check-sysctl-docs to keep this up to date:
+.. scripts/check-sysctl-docs -vtable="abi" \
+..         Documentation/admin-guide/sysctl/abi.rst \
+..         $(git grep -l register_sysctl_)
 
-Copyright (c) 2003,  Fabian Frederick <ffrederick@users.sourceforge.net>
+Copyright (c) 2020, Stephen Kitt
 
-For general info: index.rst.
+For general info, see :doc:`index`.
 
 ------------------------------------------------------------------------------
 
-This path is binary emulation relevant aka personality types aka abi.
-When a process is executed, it's linked to an exec_domain whose
-personality is defined using values available from /proc/sys/abi.
-You can find further details about abi in include/linux/personality.h.
-
-Here are the files featuring in 2.6 kernel:
-
-- defhandler_coff
-- defhandler_elf
-- defhandler_lcall7
-- defhandler_libcso
-- fake_utsname
-- trace
-
-defhandler_coff
----------------
-
-defined value:
-	PER_SCOSVR3::
-
-		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE
-
-defhandler_elf
---------------
-
-defined value:
-	PER_LINUX::
-
-		0
-
-defhandler_lcall7
------------------
-
-defined value :
-	PER_SVR4::
-
-		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-
-defhandler_libsco
------------------
-
-defined value:
-	PER_SVR4::
+The files in ``/proc/sys/abi`` can be used to see and modify
+ABI-related settings.
 
-		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+Currently, these files might (depending on your configuration)
+show up in ``/proc/sys/kernel``:
 
-fake_utsname
-------------
+.. contents:: :local:
 
-Unused
+vsyscall32 (x86)
+================
 
-trace
------
+Determines whether the kernels maps a vDSO page into 32-bit processes;
+can be set to 1 to enable, or 0 to disable. Defaults to enabled if
+``CONFIG_COMPAT_VDSO`` is set, disabled otherwide.
 
-Unused
+This controls the same setting as the ``vdso32`` kernel boot
+parameter.
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysctl/net.rst
index 42cd04bca548..f2ab8a5b6a4b 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -321,11 +321,20 @@ fb_tunnels_only_for_init_net
 ----------------------------
 
 Controls if fallback tunnels (like tunl0, gre0, gretap0, erspan0,
-sit0, ip6tnl0, ip6gre0) are automatically created when a new
-network namespace is created, if corresponding tunnel is present
-in initial network namespace.
-If set to 1, these devices are not automatically created, and
-user space is responsible for creating them if needed.
+sit0, ip6tnl0, ip6gre0) are automatically created. There are 3 possibilities
+(a) value = 0; respective fallback tunnels are created when module is
+loaded in every net namespaces (backward compatible behavior).
+(b) value = 1; [kcmd value: initns] respective fallback tunnels are
+created only in init net namespace and every other net namespace will
+not have them.
+(c) value = 2; [kcmd value: none] fallback tunnels are not created
+when a module is loaded in any of the net namespace. Setting value to
+"2" is pointless after boot if these modules are built-in, so there is
+a kernel command-line option that can change this default. Please refer to
+Documentation/admin-guide/kernel-parameters.txt for additional details.
+
+Not creating fallback tunnels gives control to userspace to create
+whatever is needed only and avoid creating devices which are redundant.
 
 Default : 0  (for compatibility reasons)
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/sysctl/vm.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysctl/vm.rst
index 4b9d2e8e9142..f455fa00c00f 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysctl/vm.rst
@@ -27,6 +27,7 @@ Currently, these files are in /proc/sys/vm:
 - admin_reserve_kbytes
 - block_dump
 - compact_memory
+- compaction_proactiveness
 - compact_unevictable_allowed
 - dirty_background_bytes
 - dirty_background_ratio
@@ -37,6 +38,7 @@ Currently, these files are in /proc/sys/vm:
 - dirty_writeback_centisecs
 - drop_caches
 - extfrag_threshold
+- highmem_is_dirtyable
 - hugetlb_shm_group
 - laptop_mode
 - legacy_va_layout
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/sysrq.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysrq.rst
index e6424d8c5846..67dfa4c29093 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/sysrq.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/sysrq.rst
@@ -79,6 +79,8 @@ On all
 
 		echo t > /proc/sysrq-trigger
 
+The :kbd:`<command key>` is case sensitive.
+
 What are the 'command' keys?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/tainted-kernels.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/tainted-kernels.rst
index abf804719890..f718a2eaf1f6 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/tainted-kernels.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/tainted-kernels.rst
@@ -130,7 +130,7 @@ More detailed explanation for tainting
  5)  ``B`` If a page-release function has found a bad page reference or some
      unexpected page flags. This indicates a hardware problem or a kernel bug;
      there should be other information in the log indicating why this tainting
-     occured.
+     occurred.
 
  6)  ``U`` if a user or user application specifically requested that the
      Tainted flag be set, ``' '`` otherwise.
diff --git linux-libre-5.9-gnu/Documentation/admin-guide/xfs.rst linux-libre-5.10-rc7-gnu/Documentation/admin-guide/xfs.rst
index f461d6c33534..86de8a1ad91c 100644
--- linux-libre-5.9-gnu/Documentation/admin-guide/xfs.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/admin-guide/xfs.rst
@@ -210,6 +210,28 @@ When mounting an XFS filesystem, the following options are accepted.
 	inconsistent namespace presentation during or after a
 	failover event.
 
+Deprecation of V4 Format
+========================
+
+The V4 filesystem format lacks certain features that are supported by
+the V5 format, such as metadata checksumming, strengthened metadata
+verification, and the ability to store timestamps past the year 2038.
+Because of this, the V4 format is deprecated.  All users should upgrade
+by backing up their files, reformatting, and restoring from the backup.
+
+Administrators and users can detect a V4 filesystem by running xfs_info
+against a filesystem mountpoint and checking for a string containing
+"crc=".  If no such string is found, please upgrade xfsprogs to the
+latest version and try again.
+
+The deprecation will take place in two parts.  Support for mounting V4
+filesystems can now be disabled at kernel build time via Kconfig option.
+The option will default to yes until September 2025, at which time it
+will be changed to default to no.  In September 2030, support will be
+removed from the codebase entirely.
+
+Note: Distributors may choose to withdraw V4 format support earlier than
+the dates listed above.
 
 Deprecated Mount Options
 ========================
@@ -217,6 +239,9 @@ Deprecated Mount Options
 ===========================     ================
   Name				Removal Schedule
 ===========================     ================
+Mounting with V4 filesystem     September 2030
+ikeep/noikeep			September 2025
+attr2/noattr2			September 2025
 ===========================     ================
 
 
@@ -331,7 +356,12 @@ The following sysctls are available for the XFS filesystem:
 Deprecated Sysctls
 ==================
 
-None at present.
+===========================     ================
+  Name				Removal Schedule
+===========================     ================
+fs.xfs.irix_sgid_inherit        September 2025
+fs.xfs.irix_symlink_mode        September 2025
+===========================     ================
 
 
 Removed Sysctls
diff --git linux-libre-5.9-gnu/Documentation/arm/sunxi.rst linux-libre-5.10-rc7-gnu/Documentation/arm/sunxi.rst
index b037428aee98..0c536ae1d7c2 100644
--- linux-libre-5.9-gnu/Documentation/arm/sunxi.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm/sunxi.rst
@@ -108,7 +108,7 @@ SunXi family
 
         * Datasheet
 
-          http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
+          https://linux-sunxi.org/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf
 
       - Allwinner R40 (sun8i)
 
@@ -148,3 +148,13 @@ SunXi family
         * User Manual
 
           http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
+
+      - Allwinner H6
+
+	* Datasheet
+
+	  https://linux-sunxi.org/images/5/5c/Allwinner_H6_V200_Datasheet_V1.1.pdf
+
+	* User Manual
+
+	  https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf
diff --git linux-libre-5.9-gnu/Documentation/arm/uefi.rst linux-libre-5.10-rc7-gnu/Documentation/arm/uefi.rst
index f868330df6be..f732f957421f 100644
--- linux-libre-5.9-gnu/Documentation/arm/uefi.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm/uefi.rst
@@ -23,7 +23,7 @@ makes it possible for the kernel to support additional features:
 For actually enabling [U]EFI support, enable:
 
 - CONFIG_EFI=y
-- CONFIG_EFI_VARS=y or m
+- CONFIG_EFIVAR_FS=y or m
 
 The implementation depends on receiving information about the UEFI environment
 in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF.
diff --git linux-libre-5.9-gnu/Documentation/arm64/amu.rst linux-libre-5.10-rc7-gnu/Documentation/arm64/amu.rst
index 452ec8b115c2..01f2de2b0450 100644
--- linux-libre-5.9-gnu/Documentation/arm64/amu.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm64/amu.rst
@@ -1,3 +1,5 @@
+.. _amu_index:
+
 =======================================================
 Activity Monitors Unit (AMU) extension in AArch64 Linux
 =======================================================
diff --git linux-libre-5.9-gnu/Documentation/arm64/cpu-feature-registers.rst linux-libre-5.10-rc7-gnu/Documentation/arm64/cpu-feature-registers.rst
index f28853f80089..328e0c454fbd 100644
--- linux-libre-5.9-gnu/Documentation/arm64/cpu-feature-registers.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm64/cpu-feature-registers.rst
@@ -175,6 +175,8 @@ infrastructure:
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
      +------------------------------+---------+---------+
+     | MTE                          | [11-8]  |    y    |
+     +------------------------------+---------+---------+
      | SSBS                         | [7-4]   |    y    |
      +------------------------------+---------+---------+
      | BT                           | [3-0]   |    y    |
diff --git linux-libre-5.9-gnu/Documentation/arm64/elf_hwcaps.rst linux-libre-5.10-rc7-gnu/Documentation/arm64/elf_hwcaps.rst
index 84a9fd2d41b4..bbd9cf54db6c 100644
--- linux-libre-5.9-gnu/Documentation/arm64/elf_hwcaps.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm64/elf_hwcaps.rst
@@ -240,6 +240,10 @@ HWCAP2_BTI
 
     Functionality implied by ID_AA64PFR0_EL1.BT == 0b0001.
 
+HWCAP2_MTE
+
+    Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
+    by Documentation/arm64/memory-tagging-extension.rst.
 
 4. Unused AT_HWCAP bits
 -----------------------
diff --git linux-libre-5.9-gnu/Documentation/arm64/hugetlbpage.rst linux-libre-5.10-rc7-gnu/Documentation/arm64/hugetlbpage.rst
index b44f939e5210..a110124c11e3 100644
--- linux-libre-5.9-gnu/Documentation/arm64/hugetlbpage.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm64/hugetlbpage.rst
@@ -1,3 +1,5 @@
+.. _hugetlbpage_index:
+
 ====================
 HugeTLBpage on ARM64
 ====================
diff --git linux-libre-5.9-gnu/Documentation/arm64/index.rst linux-libre-5.10-rc7-gnu/Documentation/arm64/index.rst
index d9665d83c53a..937634c49979 100644
--- linux-libre-5.9-gnu/Documentation/arm64/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm64/index.rst
@@ -1,3 +1,5 @@
+.. _arm64_index:
+
 ==================
 ARM64 Architecture
 ==================
@@ -14,6 +16,7 @@ ARM64 Architecture
     hugetlbpage
     legacy_instructions
     memory
+    memory-tagging-extension
     perf
     pointer-authentication
     silicon-errata
diff --git linux-libre-5.9-gnu/Documentation/arm64/memory-tagging-extension.rst linux-libre-5.10-rc7-gnu/Documentation/arm64/memory-tagging-extension.rst
new file mode 100644
index 000000000000..b540178a93f8
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/arm64/memory-tagging-extension.rst
@@ -0,0 +1,307 @@
+===============================================
+Memory Tagging Extension (MTE) in AArch64 Linux
+===============================================
+
+Authors: Vincenzo Frascino <vincenzo.frascino@arm.com>
+         Catalin Marinas <catalin.marinas@arm.com>
+
+Date: 2020-02-25
+
+This document describes the provision of the Memory Tagging Extension
+functionality in AArch64 Linux.
+
+Introduction
+============
+
+ARMv8.5 based processors introduce the Memory Tagging Extension (MTE)
+feature. MTE is built on top of the ARMv8.0 virtual address tagging TBI
+(Top Byte Ignore) feature and allows software to access a 4-bit
+allocation tag for each 16-byte granule in the physical address space.
+Such memory range must be mapped with the Normal-Tagged memory
+attribute. A logical tag is derived from bits 59-56 of the virtual
+address used for the memory access. A CPU with MTE enabled will compare
+the logical tag against the allocation tag and potentially raise an
+exception on mismatch, subject to system registers configuration.
+
+Userspace Support
+=================
+
+When ``CONFIG_ARM64_MTE`` is selected and Memory Tagging Extension is
+supported by the hardware, the kernel advertises the feature to
+userspace via ``HWCAP2_MTE``.
+
+PROT_MTE
+--------
+
+To access the allocation tags, a user process must enable the Tagged
+memory attribute on an address range using a new ``prot`` flag for
+``mmap()`` and ``mprotect()``:
+
+``PROT_MTE`` - Pages allow access to the MTE allocation tags.
+
+The allocation tag is set to 0 when such pages are first mapped in the
+user address space and preserved on copy-on-write. ``MAP_SHARED`` is
+supported and the allocation tags can be shared between processes.
+
+**Note**: ``PROT_MTE`` is only supported on ``MAP_ANONYMOUS`` and
+RAM-based file mappings (``tmpfs``, ``memfd``). Passing it to other
+types of mapping will result in ``-EINVAL`` returned by these system
+calls.
+
+**Note**: The ``PROT_MTE`` flag (and corresponding memory type) cannot
+be cleared by ``mprotect()``.
+
+**Note**: ``madvise()`` memory ranges with ``MADV_DONTNEED`` and
+``MADV_FREE`` may have the allocation tags cleared (set to 0) at any
+point after the system call.
+
+Tag Check Faults
+----------------
+
+When ``PROT_MTE`` is enabled on an address range and a mismatch between
+the logical and allocation tags occurs on access, there are three
+configurable behaviours:
+
+- *Ignore* - This is the default mode. The CPU (and kernel) ignores the
+  tag check fault.
+
+- *Synchronous* - The kernel raises a ``SIGSEGV`` synchronously, with
+  ``.si_code = SEGV_MTESERR`` and ``.si_addr = <fault-address>``. The
+  memory access is not performed. If ``SIGSEGV`` is ignored or blocked
+  by the offending thread, the containing process is terminated with a
+  ``coredump``.
+
+- *Asynchronous* - The kernel raises a ``SIGSEGV``, in the offending
+  thread, asynchronously following one or multiple tag check faults,
+  with ``.si_code = SEGV_MTEAERR`` and ``.si_addr = 0`` (the faulting
+  address is unknown).
+
+The user can select the above modes, per thread, using the
+``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where
+``flags`` contain one of the following values in the ``PR_MTE_TCF_MASK``
+bit-field:
+
+- ``PR_MTE_TCF_NONE``  - *Ignore* tag check faults
+- ``PR_MTE_TCF_SYNC``  - *Synchronous* tag check fault mode
+- ``PR_MTE_TCF_ASYNC`` - *Asynchronous* tag check fault mode
+
+The current tag check fault mode can be read using the
+``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call.
+
+Tag checking can also be disabled for a user thread by setting the
+``PSTATE.TCO`` bit with ``MSR TCO, #1``.
+
+**Note**: Signal handlers are always invoked with ``PSTATE.TCO = 0``,
+irrespective of the interrupted context. ``PSTATE.TCO`` is restored on
+``sigreturn()``.
+
+**Note**: There are no *match-all* logical tags available for user
+applications.
+
+**Note**: Kernel accesses to the user address space (e.g. ``read()``
+system call) are not checked if the user thread tag checking mode is
+``PR_MTE_TCF_NONE`` or ``PR_MTE_TCF_ASYNC``. If the tag checking mode is
+``PR_MTE_TCF_SYNC``, the kernel makes a best effort to check its user
+address accesses, however it cannot always guarantee it. Kernel accesses
+to user addresses are always performed with an effective ``PSTATE.TCO``
+value of zero, regardless of the user configuration.
+
+Excluding Tags in the ``IRG``, ``ADDG`` and ``SUBG`` instructions
+-----------------------------------------------------------------
+
+The architecture allows excluding certain tags to be randomly generated
+via the ``GCR_EL1.Exclude`` register bit-field. By default, Linux
+excludes all tags other than 0. A user thread can enable specific tags
+in the randomly generated set using the ``prctl(PR_SET_TAGGED_ADDR_CTRL,
+flags, 0, 0, 0)`` system call where ``flags`` contains the tags bitmap
+in the ``PR_MTE_TAG_MASK`` bit-field.
+
+**Note**: The hardware uses an exclude mask but the ``prctl()``
+interface provides an include mask. An include mask of ``0`` (exclusion
+mask ``0xffff``) results in the CPU always generating tag ``0``.
+
+Initial process state
+---------------------
+
+On ``execve()``, the new process has the following configuration:
+
+- ``PR_TAGGED_ADDR_ENABLE`` set to 0 (disabled)
+- Tag checking mode set to ``PR_MTE_TCF_NONE``
+- ``PR_MTE_TAG_MASK`` set to 0 (all tags excluded)
+- ``PSTATE.TCO`` set to 0
+- ``PROT_MTE`` not set on any of the initial memory maps
+
+On ``fork()``, the new process inherits the parent's configuration and
+memory map attributes with the exception of the ``madvise()`` ranges
+with ``MADV_WIPEONFORK`` which will have the data and tags cleared (set
+to 0).
+
+The ``ptrace()`` interface
+--------------------------
+
+``PTRACE_PEEKMTETAGS`` and ``PTRACE_POKEMTETAGS`` allow a tracer to read
+the tags from or set the tags to a tracee's address space. The
+``ptrace()`` system call is invoked as ``ptrace(request, pid, addr,
+data)`` where:
+
+- ``request`` - one of ``PTRACE_PEEKMTETAGS`` or ``PTRACE_POKEMTETAGS``.
+- ``pid`` - the tracee's PID.
+- ``addr`` - address in the tracee's address space.
+- ``data`` - pointer to a ``struct iovec`` where ``iov_base`` points to
+  a buffer of ``iov_len`` length in the tracer's address space.
+
+The tags in the tracer's ``iov_base`` buffer are represented as one
+4-bit tag per byte and correspond to a 16-byte MTE tag granule in the
+tracee's address space.
+
+**Note**: If ``addr`` is not aligned to a 16-byte granule, the kernel
+will use the corresponding aligned address.
+
+``ptrace()`` return value:
+
+- 0 - tags were copied, the tracer's ``iov_len`` was updated to the
+  number of tags transferred. This may be smaller than the requested
+  ``iov_len`` if the requested address range in the tracee's or the
+  tracer's space cannot be accessed or does not have valid tags.
+- ``-EPERM`` - the specified process cannot be traced.
+- ``-EIO`` - the tracee's address range cannot be accessed (e.g. invalid
+  address) and no tags copied. ``iov_len`` not updated.
+- ``-EFAULT`` - fault on accessing the tracer's memory (``struct iovec``
+  or ``iov_base`` buffer) and no tags copied. ``iov_len`` not updated.
+- ``-EOPNOTSUPP`` - the tracee's address does not have valid tags (never
+  mapped with the ``PROT_MTE`` flag). ``iov_len`` not updated.
+
+**Note**: There are no transient errors for the requests above, so user
+programs should not retry in case of a non-zero system call return.
+
+``PTRACE_GETREGSET`` and ``PTRACE_SETREGSET`` with ``addr ==
+``NT_ARM_TAGGED_ADDR_CTRL`` allow ``ptrace()`` access to the tagged
+address ABI control and MTE configuration of a process as per the
+``prctl()`` options described in
+Documentation/arm64/tagged-address-abi.rst and above. The corresponding
+``regset`` is 1 element of 8 bytes (``sizeof(long))``).
+
+Example of correct usage
+========================
+
+*MTE Example code*
+
+.. code-block:: c
+
+    /*
+     * To be compiled with -march=armv8.5-a+memtag
+     */
+    #include <errno.h>
+    #include <stdint.h>
+    #include <stdio.h>
+    #include <stdlib.h>
+    #include <unistd.h>
+    #include <sys/auxv.h>
+    #include <sys/mman.h>
+    #include <sys/prctl.h>
+
+    /*
+     * From arch/arm64/include/uapi/asm/hwcap.h
+     */
+    #define HWCAP2_MTE              (1 << 18)
+
+    /*
+     * From arch/arm64/include/uapi/asm/mman.h
+     */
+    #define PROT_MTE                 0x20
+
+    /*
+     * From include/uapi/linux/prctl.h
+     */
+    #define PR_SET_TAGGED_ADDR_CTRL 55
+    #define PR_GET_TAGGED_ADDR_CTRL 56
+    # define PR_TAGGED_ADDR_ENABLE  (1UL << 0)
+    # define PR_MTE_TCF_SHIFT       1
+    # define PR_MTE_TCF_NONE        (0UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TCF_SYNC        (1UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TCF_ASYNC       (2UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TCF_MASK        (3UL << PR_MTE_TCF_SHIFT)
+    # define PR_MTE_TAG_SHIFT       3
+    # define PR_MTE_TAG_MASK        (0xffffUL << PR_MTE_TAG_SHIFT)
+
+    /*
+     * Insert a random logical tag into the given pointer.
+     */
+    #define insert_random_tag(ptr) ({                       \
+            uint64_t __val;                                 \
+            asm("irg %0, %1" : "=r" (__val) : "r" (ptr));   \
+            __val;                                          \
+    })
+
+    /*
+     * Set the allocation tag on the destination address.
+     */
+    #define set_tag(tagged_addr) do {                                      \
+            asm volatile("stg %0, [%0]" : : "r" (tagged_addr) : "memory"); \
+    } while (0)
+
+    int main()
+    {
+            unsigned char *a;
+            unsigned long page_sz = sysconf(_SC_PAGESIZE);
+            unsigned long hwcap2 = getauxval(AT_HWCAP2);
+
+            /* check if MTE is present */
+            if (!(hwcap2 & HWCAP2_MTE))
+                    return EXIT_FAILURE;
+
+            /*
+             * Enable the tagged address ABI, synchronous MTE tag check faults and
+             * allow all non-zero tags in the randomly generated set.
+             */
+            if (prctl(PR_SET_TAGGED_ADDR_CTRL,
+                      PR_TAGGED_ADDR_ENABLE | PR_MTE_TCF_SYNC | (0xfffe << PR_MTE_TAG_SHIFT),
+                      0, 0, 0)) {
+                    perror("prctl() failed");
+                    return EXIT_FAILURE;
+            }
+
+            a = mmap(0, page_sz, PROT_READ | PROT_WRITE,
+                     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+            if (a == MAP_FAILED) {
+                    perror("mmap() failed");
+                    return EXIT_FAILURE;
+            }
+
+            /*
+             * Enable MTE on the above anonymous mmap. The flag could be passed
+             * directly to mmap() and skip this step.
+             */
+            if (mprotect(a, page_sz, PROT_READ | PROT_WRITE | PROT_MTE)) {
+                    perror("mprotect() failed");
+                    return EXIT_FAILURE;
+            }
+
+            /* access with the default tag (0) */
+            a[0] = 1;
+            a[1] = 2;
+
+            printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
+
+            /* set the logical and allocation tags */
+            a = (unsigned char *)insert_random_tag(a);
+            set_tag(a);
+
+            printf("%p\n", a);
+
+            /* non-zero tag access */
+            a[0] = 3;
+            printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
+
+            /*
+             * If MTE is enabled correctly the next instruction will generate an
+             * exception.
+             */
+            printf("Expecting SIGSEGV...\n");
+            a[16] = 0xdd;
+
+            /* this should not be printed in the PR_MTE_TCF_SYNC mode */
+            printf("...haven't got one\n");
+
+            return EXIT_FAILURE;
+    }
diff --git linux-libre-5.9-gnu/Documentation/arm64/silicon-errata.rst linux-libre-5.10-rc7-gnu/Documentation/arm64/silicon-errata.rst
index d3587805de64..719510247292 100644
--- linux-libre-5.9-gnu/Documentation/arm64/silicon-errata.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/arm64/silicon-errata.rst
@@ -90,6 +90,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
diff --git linux-libre-5.9-gnu/Documentation/block/blk-mq.rst linux-libre-5.10-rc7-gnu/Documentation/block/blk-mq.rst
index 88c56afcb070..a980d23af48c 100644
--- linux-libre-5.9-gnu/Documentation/block/blk-mq.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/block/blk-mq.rst
@@ -63,10 +63,10 @@ Software staging queues
 ~~~~~~~~~~~~~~~~~~~~~~~
 
 The block IO subsystem adds requests  in the software staging queues
-(represented by struct :c:type:`blk_mq_ctx`) in case that they weren't sent
+(represented by struct blk_mq_ctx) in case that they weren't sent
 directly to the driver. A request is one or more BIOs. They arrived at the
-block layer through the data structure struct :c:type:`bio`. The block layer
-will then build a new structure from it, the struct :c:type:`request` that will
+block layer through the data structure struct bio. The block layer
+will then build a new structure from it, the struct request that will
 be used to communicate with the device driver. Each queue has its own lock and
 the number of queues is defined by a per-CPU or per-node basis.
 
@@ -102,7 +102,7 @@ hardware queue will be drained in sequence according to their mapping.
 Hardware dispatch queues
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
-The hardware queue (represented by struct :c:type:`blk_mq_hw_ctx`) is a struct
+The hardware queue (represented by struct blk_mq_hw_ctx) is a struct
 used by device drivers to map the device submission queues (or device DMA ring
 buffer), and are the last step of the block layer submission code before the
 low level device driver taking ownership of the request. To run this queue, the
@@ -110,9 +110,9 @@ block layer removes requests from the associated software queues and tries to
 dispatch to the hardware.
 
 If it's not possible to send the requests directly to hardware, they will be
-added to a linked list (:c:type:`hctx->dispatch`) of requests. Then,
+added to a linked list (``hctx->dispatch``) of requests. Then,
 next time the block layer runs a queue, it will send the requests laying at the
-:c:type:`dispatch` list first, to ensure a fairness dispatch with those
+``dispatch`` list first, to ensure a fairness dispatch with those
 requests that were ready to be sent first. The number of hardware queues
 depends on the number of hardware contexts supported by the hardware and its
 device driver, but it will not be more than the number of cores of the system.
diff --git linux-libre-5.9-gnu/Documentation/block/inline-encryption.rst linux-libre-5.10-rc7-gnu/Documentation/block/inline-encryption.rst
index 354817b80887..e75151e467d3 100644
--- linux-libre-5.9-gnu/Documentation/block/inline-encryption.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/block/inline-encryption.rst
@@ -52,7 +52,7 @@ Constraints and notes
 Design
 ======
 
-We add a :c:type:`struct bio_crypt_ctx` to :c:type:`struct bio` that can
+We add a struct bio_crypt_ctx to struct bio that can
 represent an encryption context, because we need to be able to pass this
 encryption context from the upper layers (like the fs layer) to the
 device driver to act upon.
@@ -85,7 +85,7 @@ blk-mq changes, other block layer changes and blk-crypto-fallback
 =================================================================
 
 We add a pointer to a ``bi_crypt_context`` and ``keyslot`` to
-:c:type:`struct request`. These will be referred to as the ``crypto fields``
+struct request. These will be referred to as the ``crypto fields``
 for the request. This ``keyslot`` is the keyslot into which the
 ``bi_crypt_context`` has been programmed in the KSM of the ``request_queue``
 that this request is being sent to.
@@ -118,7 +118,7 @@ of the algorithm being used adheres to spec and functions correctly).
 If a ``request queue``'s inline encryption hardware claimed to support the
 encryption context specified with a bio, then it will not be handled by the
 ``blk-crypto-fallback``. We will eventually reach a point in blk-mq when a
-:c:type:`struct request` needs to be allocated for that bio. At that point,
+struct request needs to be allocated for that bio. At that point,
 blk-mq tries to program the encryption context into the ``request_queue``'s
 keyslot_manager, and obtain a keyslot, which it stores in its newly added
 ``keyslot`` field. This keyslot is released when the request is completed.
@@ -188,7 +188,7 @@ keyslots supported by the hardware.
 The device driver also needs to tell the KSM how to actually manipulate the
 IE hardware in the device to do things like programming the crypto key into
 the IE hardware into a particular keyslot. All this is achieved through the
-:c:type:`struct blk_ksm_ll_ops` field in the KSM that the device driver
+struct blk_ksm_ll_ops field in the KSM that the device driver
 must fill up after initing the ``blk_keyslot_manager``.
 
 The KSM also handles runtime power management for the device when applicable
diff --git linux-libre-5.9-gnu/Documentation/block/queue-sysfs.rst linux-libre-5.10-rc7-gnu/Documentation/block/queue-sysfs.rst
index f261a5c84170..2638d3446b79 100644
--- linux-libre-5.9-gnu/Documentation/block/queue-sysfs.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/block/queue-sysfs.rst
@@ -124,6 +124,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW
+errno.
+
 max_open_zones (RO)
 -------------------
 For zoned block devices (zoned attribute indicating "host-managed" or
@@ -131,6 +135,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS
+errno.
+
 max_sectors_kb (RW)
 -------------------
 This is the maximum number of kilobytes that the block layer will allow
diff --git linux-libre-5.9-gnu/Documentation/bpf/bpf_devel_QA.rst linux-libre-5.10-rc7-gnu/Documentation/bpf/bpf_devel_QA.rst
index a26aa1b9b259..5b613d2a5f1a 100644
--- linux-libre-5.9-gnu/Documentation/bpf/bpf_devel_QA.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/bpf/bpf_devel_QA.rst
@@ -60,13 +60,13 @@ Q: Where can I find patches currently under discussion for BPF subsystem?
 A: All patches that are Cc'ed to netdev are queued for review under netdev
 patchwork project:
 
-  http://patchwork.ozlabs.org/project/netdev/list/
+  https://patchwork.kernel.org/project/netdevbpf/list/
 
 Those patches which target BPF, are assigned to a 'bpf' delegate for
 further processing from BPF maintainers. The current queue with
 patches under review can be found at:
 
-  https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
+  https://patchwork.kernel.org/project/netdevbpf/list/?delegate=121173
 
 Once the patches have been reviewed by the BPF community as a whole
 and approved by the BPF maintainers, their status in patchwork will be
@@ -149,7 +149,7 @@ In case the patch or patch series has to be reworked and sent out
 again in a second or later revision, it is also required to add a
 version number (``v2``, ``v3``, ...) into the subject prefix::
 
-  git format-patch --subject-prefix='PATCH net-next v2' start..finish
+  git format-patch --subject-prefix='PATCH bpf-next v2' start..finish
 
 When changes have been requested to the patch series, always send the
 whole patch series again with the feedback incorporated (never send
@@ -479,17 +479,18 @@ LLVM's static compiler lists the supported targets through
 
      $ llc --version
      LLVM (http://llvm.org/):
-       LLVM version 6.0.0svn
+       LLVM version 10.0.0
        Optimized build.
        Default target: x86_64-unknown-linux-gnu
        Host CPU: skylake
 
        Registered Targets:
-         bpf    - BPF (host endian)
-         bpfeb  - BPF (big endian)
-         bpfel  - BPF (little endian)
-         x86    - 32-bit X86: Pentium-Pro and above
-         x86-64 - 64-bit X86: EM64T and AMD64
+         aarch64    - AArch64 (little endian)
+         bpf        - BPF (host endian)
+         bpfeb      - BPF (big endian)
+         bpfel      - BPF (little endian)
+         x86        - 32-bit X86: Pentium-Pro and above
+         x86-64     - 64-bit X86: EM64T and AMD64
 
 For developers in order to utilize the latest features added to LLVM's
 BPF back end, it is advisable to run the latest LLVM releases. Support
@@ -517,6 +518,10 @@ from the git repositories::
 The built binaries can then be found in the build/bin/ directory, where
 you can point the PATH variable to.
 
+Set ``-DLLVM_TARGETS_TO_BUILD`` equal to the target you wish to build, you
+will find a full list of targets within the llvm-project/llvm/lib/Target
+directory.
+
 Q: Reporting LLVM BPF issues
 ----------------------------
 Q: Should I notify BPF kernel maintainers about issues in LLVM's BPF code
diff --git linux-libre-5.9-gnu/Documentation/bpf/btf.rst linux-libre-5.10-rc7-gnu/Documentation/bpf/btf.rst
index b5361b8621c9..44dc789de2b4 100644
--- linux-libre-5.9-gnu/Documentation/bpf/btf.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/bpf/btf.rst
@@ -724,6 +724,31 @@ want to define unused entry in BTF_ID_LIST, like::
       BTF_ID_UNUSED
       BTF_ID(struct, task_struct)
 
+The ``BTF_SET_START/END`` macros pair defines sorted list of BTF ID values
+and their count, with following syntax::
+
+  BTF_SET_START(set)
+  BTF_ID(type1, name1)
+  BTF_ID(type2, name2)
+  BTF_SET_END(set)
+
+resulting in following layout in .BTF_ids section::
+
+  __BTF_ID__set__set:
+  .zero 4
+  __BTF_ID__type1__name1__3:
+  .zero 4
+  __BTF_ID__type2__name2__4:
+  .zero 4
+
+The ``struct btf_id_set set;`` variable is defined to access the list.
+
+The ``typeX`` name can be one of following::
+
+   struct, union, typedef, func
+
+and is used as a filter when resolving the BTF ID value.
+
 All the BTF ID lists and sets are compiled in the .BTF_ids section and
 resolved during the linking phase of kernel build by ``resolve_btfids`` tool.
 
diff --git linux-libre-5.9-gnu/Documentation/bpf/index.rst linux-libre-5.10-rc7-gnu/Documentation/bpf/index.rst
index 7df2465fd108..4f2874b729c3 100644
--- linux-libre-5.9-gnu/Documentation/bpf/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/bpf/index.rst
@@ -52,6 +52,7 @@ Program types
    prog_cgroup_sysctl
    prog_flow_dissector
    bpf_lsm
+   prog_sk_lookup
 
 
 Map types
diff --git linux-libre-5.9-gnu/Documentation/bpf/prog_sk_lookup.rst linux-libre-5.10-rc7-gnu/Documentation/bpf/prog_sk_lookup.rst
new file mode 100644
index 000000000000..85a305c19bcd
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/bpf/prog_sk_lookup.rst
@@ -0,0 +1,98 @@
+.. SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+=====================
+BPF sk_lookup program
+=====================
+
+BPF sk_lookup program type (``BPF_PROG_TYPE_SK_LOOKUP``) introduces programmability
+into the socket lookup performed by the transport layer when a packet is to be
+delivered locally.
+
+When invoked BPF sk_lookup program can select a socket that will receive the
+incoming packet by calling the ``bpf_sk_assign()`` BPF helper function.
+
+Hooks for a common attach point (``BPF_SK_LOOKUP``) exist for both TCP and UDP.
+
+Motivation
+==========
+
+BPF sk_lookup program type was introduced to address setup scenarios where
+binding sockets to an address with ``bind()`` socket call is impractical, such
+as:
+
+1. receiving connections on a range of IP addresses, e.g. 192.0.2.0/24, when
+   binding to a wildcard address ``INADRR_ANY`` is not possible due to a port
+   conflict,
+2. receiving connections on all or a wide range of ports, i.e. an L7 proxy use
+   case.
+
+Such setups would require creating and ``bind()``'ing one socket to each of the
+IP address/port in the range, leading to resource consumption and potential
+latency spikes during socket lookup.
+
+Attachment
+==========
+
+BPF sk_lookup program can be attached to a network namespace with
+``bpf(BPF_LINK_CREATE, ...)`` syscall using the ``BPF_SK_LOOKUP`` attach type and a
+netns FD as attachment ``target_fd``.
+
+Multiple programs can be attached to one network namespace. Programs will be
+invoked in the same order as they were attached.
+
+Hooks
+=====
+
+The attached BPF sk_lookup programs run whenever the transport layer needs to
+find a listening (TCP) or an unconnected (UDP) socket for an incoming packet.
+
+Incoming traffic to established (TCP) and connected (UDP) sockets is delivered
+as usual without triggering the BPF sk_lookup hook.
+
+The attached BPF programs must return with either ``SK_PASS`` or ``SK_DROP``
+verdict code. As for other BPF program types that are network filters,
+``SK_PASS`` signifies that the socket lookup should continue on to regular
+hashtable-based lookup, while ``SK_DROP`` causes the transport layer to drop the
+packet.
+
+A BPF sk_lookup program can also select a socket to receive the packet by
+calling ``bpf_sk_assign()`` BPF helper. Typically, the program looks up a socket
+in a map holding sockets, such as ``SOCKMAP`` or ``SOCKHASH``, and passes a
+``struct bpf_sock *`` to ``bpf_sk_assign()`` helper to record the
+selection. Selecting a socket only takes effect if the program has terminated
+with ``SK_PASS`` code.
+
+When multiple programs are attached, the end result is determined from return
+codes of all the programs according to the following rules:
+
+1. If any program returned ``SK_PASS`` and selected a valid socket, the socket
+   is used as the result of the socket lookup.
+2. If more than one program returned ``SK_PASS`` and selected a socket, the last
+   selection takes effect.
+3. If any program returned ``SK_DROP``, and no program returned ``SK_PASS`` and
+   selected a socket, socket lookup fails.
+4. If all programs returned ``SK_PASS`` and none of them selected a socket,
+   socket lookup continues on.
+
+API
+===
+
+In its context, an instance of ``struct bpf_sk_lookup``, BPF sk_lookup program
+receives information about the packet that triggered the socket lookup. Namely:
+
+* IP version (``AF_INET`` or ``AF_INET6``),
+* L4 protocol identifier (``IPPROTO_TCP`` or ``IPPROTO_UDP``),
+* source and destination IP address,
+* source and destination L4 port,
+* the socket that has been selected with ``bpf_sk_assign()``.
+
+Refer to ``struct bpf_sk_lookup`` declaration in ``linux/bpf.h`` user API
+header, and `bpf-helpers(7)
+<https://man7.org/linux/man-pages/man7/bpf-helpers.7.html>`_ man-page section
+for ``bpf_sk_assign()`` for details.
+
+Example
+=======
+
+See ``tools/testing/selftests/bpf/prog_tests/sk_lookup.c`` for the reference
+implementation.
diff --git linux-libre-5.9-gnu/Documentation/conf.py linux-libre-5.10-rc7-gnu/Documentation/conf.py
index c503188880d9..ed2b43ec7754 100644
--- linux-libre-5.9-gnu/Documentation/conf.py
+++ linux-libre-5.10-rc7-gnu/Documentation/conf.py
@@ -36,9 +36,82 @@ needs_sphinx = '1.3'
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
-extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain',
+extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
               'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
-              'maintainers_include', 'sphinx.ext.autosectionlabel' ]
+              'maintainers_include', 'sphinx.ext.autosectionlabel',
+              'kernel_abi']
+
+#
+# cdomain is badly broken in Sphinx 3+.  Leaving it out generates *most*
+# of the docs correctly, but not all.  Scream bloody murder but allow
+# the process to proceed; hopefully somebody will fix this properly soon.
+#
+if major >= 3:
+    sys.stderr.write('''WARNING: The kernel documentation build process
+        support for Sphinx v3.0 and above is brand new. Be prepared for
+        possible issues in the generated output.
+        ''')
+    if (major > 3) or (minor > 0 or patch >= 2):
+        # Sphinx c function parser is more pedantic with regards to type
+        # checking. Due to that, having macros at c:function cause problems.
+        # Those needed to be scaped by using c_id_attributes[] array
+        c_id_attributes = [
+            # GCC Compiler types not parsed by Sphinx:
+            "__restrict__",
+
+            # include/linux/compiler_types.h:
+            "__iomem",
+            "__kernel",
+            "noinstr",
+            "notrace",
+            "__percpu",
+            "__rcu",
+            "__user",
+
+            # include/linux/compiler_attributes.h:
+            "__alias",
+            "__aligned",
+            "__aligned_largest",
+            "__always_inline",
+            "__assume_aligned",
+            "__cold",
+            "__attribute_const__",
+            "__copy",
+            "__pure",
+            "__designated_init",
+            "__visible",
+            "__printf",
+            "__scanf",
+            "__gnu_inline",
+            "__malloc",
+            "__mode",
+            "__no_caller_saved_registers",
+            "__noclone",
+            "__nonstring",
+            "__noreturn",
+            "__packed",
+            "__pure",
+            "__section",
+            "__always_unused",
+            "__maybe_unused",
+            "__used",
+            "__weak",
+            "noinline",
+
+            # include/linux/memblock.h:
+            "__init_memblock",
+            "__meminit",
+
+            # include/linux/init.h:
+            "__init",
+            "__ref",
+
+            # include/linux/linkage.h:
+            "asmlinkage",
+        ]
+
+else:
+    extensions.append('cdomain')
 
 # Ensure that autosectionlabel will produce unique names
 autosectionlabel_prefix_document = True
diff --git linux-libre-5.9-gnu/Documentation/core-api/cpu_hotplug.rst linux-libre-5.10-rc7-gnu/Documentation/core-api/cpu_hotplug.rst
index 298c9c8bea9a..a2c96bec5ee8 100644
--- linux-libre-5.9-gnu/Documentation/core-api/cpu_hotplug.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/core-api/cpu_hotplug.rst
@@ -30,7 +30,7 @@ which didn't support these methods.
 Command Line Switches
 =====================
 ``maxcpus=n``
-  Restrict boot time CPUs to *n*. Say if you have fourV CPUs, using
+  Restrict boot time CPUs to *n*. Say if you have four CPUs, using
   ``maxcpus=2`` will only boot two. You can choose to bring the
   other CPUs later online.
 
diff --git linux-libre-5.9-gnu/Documentation/core-api/dma-api.rst linux-libre-5.10-rc7-gnu/Documentation/core-api/dma-api.rst
index 3b3abbbb4b9a..75cb757bbff0 100644
--- linux-libre-5.9-gnu/Documentation/core-api/dma-api.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/core-api/dma-api.rst
@@ -516,100 +516,110 @@ routines, e.g.:::
 	}
 
 
-Part II - Advanced dma usage
-----------------------------
+Part II - Non-coherent DMA allocations
+--------------------------------------
 
-Warning: These pieces of the DMA API should not be used in the
-majority of cases, since they cater for unlikely corner cases that
-don't belong in usual drivers.
+These APIs allow to allocate pages that are guaranteed to be DMA addressable
+by the passed in device, but which need explicit management of memory ownership
+for the kernel vs the device.
 
-If you don't understand how cache line coherency works between a
-processor and an I/O device, you should not be using this part of the
-API at all.
+If you don't understand how cache line coherency works between a processor and
+an I/O device, you should not be using this part of the API.
 
 ::
 
 	void *
-	dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
-			gfp_t flag, unsigned long attrs)
+	dma_alloc_noncoherent(struct device *dev, size_t size,
+			dma_addr_t *dma_handle, enum dma_data_direction dir,
+			gfp_t gfp)
 
-Identical to dma_alloc_coherent() except that when the
-DMA_ATTR_NON_CONSISTENT flags is passed in the attrs argument, the
-platform will choose to return either consistent or non-consistent memory
-as it sees fit.  By using this API, you are guaranteeing to the platform
-that you have all the correct and necessary sync points for this memory
-in the driver should it choose to return non-consistent memory.
+This routine allocates a region of <size> bytes of consistent memory.  It
+returns a pointer to the allocated region (in the processor's virtual address
+space) or NULL if the allocation failed.  The returned memory may or may not
+be in the kernel direct mapping.  Drivers must not call virt_to_page on
+the returned memory region.
 
-Note: where the platform can return consistent memory, it will
-guarantee that the sync points become nops.
+It also returns a <dma_handle> which may be cast to an unsigned integer the
+same width as the bus and given to the device as the DMA address base of
+the region.
+
+The dir parameter specified if data is read and/or written by the device,
+see dma_map_single() for details.
 
-Warning:  Handling non-consistent memory is a real pain.  You should
-only use this API if you positively know your driver will be
-required to work on one of the rare (usually non-PCI) architectures
-that simply cannot make consistent memory.
+The gfp parameter allows the caller to specify the ``GFP_`` flags (see
+kmalloc()) for the allocation, but rejects flags used to specify a memory
+zone such as GFP_DMA or GFP_HIGHMEM.
+
+Before giving the memory to the device, dma_sync_single_for_device() needs
+to be called, and before reading memory written by the device,
+dma_sync_single_for_cpu(), just like for streaming DMA mappings that are
+reused.
 
 ::
 
 	void
-	dma_free_attrs(struct device *dev, size_t size, void *cpu_addr,
-		       dma_addr_t dma_handle, unsigned long attrs)
+	dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+			dma_addr_t dma_handle, enum dma_data_direction dir)
 
-Free memory allocated by the dma_alloc_attrs().  All common
-parameters must be identical to those otherwise passed to dma_free_coherent,
-and the attrs argument must be identical to the attrs passed to
-dma_alloc_attrs().
+Free a region of memory previously allocated using dma_alloc_noncoherent().
+dev, size and dma_handle and dir must all be the same as those passed into
+dma_alloc_noncoherent().  cpu_addr must be the virtual address returned by
+dma_alloc_noncoherent().
 
 ::
 
-	int
-	dma_get_cache_alignment(void)
+	struct page *
+	dma_alloc_pages(struct device *dev, size_t size, dma_addr_t *dma_handle,
+			enum dma_data_direction dir, gfp_t gfp)
 
-Returns the processor cache alignment.  This is the absolute minimum
-alignment *and* width that you must observe when either mapping
-memory or doing partial flushes.
+This routine allocates a region of <size> bytes of non-coherent memory.  It
+returns a pointer to first struct page for the region, or NULL if the
+allocation failed. The resulting struct page can be used for everything a
+struct page is suitable for.
 
-.. note::
+It also returns a <dma_handle> which may be cast to an unsigned integer the
+same width as the bus and given to the device as the DMA address base of
+the region.
 
-	This API may return a number *larger* than the actual cache
-	line, but it will guarantee that one or more cache lines fit exactly
-	into the width returned by this call.  It will also always be a power
-	of two for easy alignment.
+The dir parameter specified if data is read and/or written by the device,
+see dma_map_single() for details.
+
+The gfp parameter allows the caller to specify the ``GFP_`` flags (see
+kmalloc()) for the allocation, but rejects flags used to specify a memory
+zone such as GFP_DMA or GFP_HIGHMEM.
+
+Before giving the memory to the device, dma_sync_single_for_device() needs
+to be called, and before reading memory written by the device,
+dma_sync_single_for_cpu(), just like for streaming DMA mappings that are
+reused.
 
 ::
 
 	void
-	dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-		       enum dma_data_direction direction)
+	dma_free_pages(struct device *dev, size_t size, struct page *page,
+			dma_addr_t dma_handle, enum dma_data_direction dir)
 
-Do a partial sync of memory that was allocated by dma_alloc_attrs() with
-the DMA_ATTR_NON_CONSISTENT flag starting at virtual address vaddr and
-continuing on for size.  Again, you *must* observe the cache line
-boundaries when doing this.
+Free a region of memory previously allocated using dma_alloc_pages().
+dev, size and dma_handle and dir must all be the same as those passed into
+dma_alloc_noncoherent().  page must be the pointer returned by
+dma_alloc_pages().
 
 ::
 
 	int
-	dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
-				    dma_addr_t device_addr, size_t size);
-
-Declare region of memory to be handed out by dma_alloc_coherent() when
-it's asked for coherent memory for this device.
-
-phys_addr is the CPU physical address to which the memory is currently
-assigned (this will be ioremapped so the CPU can access the region).
+	dma_get_cache_alignment(void)
 
-device_addr is the DMA address the device needs to be programmed
-with to actually address this memory (this will be handed out as the
-dma_addr_t in dma_alloc_coherent()).
+Returns the processor cache alignment.  This is the absolute minimum
+alignment *and* width that you must observe when either mapping
+memory or doing partial flushes.
 
-size is the size of the area (must be multiples of PAGE_SIZE).
+.. note::
 
-As a simplification for the platforms, only *one* such region of
-memory may be declared per device.
+	This API may return a number *larger* than the actual cache
+	line, but it will guarantee that one or more cache lines fit exactly
+	into the width returned by this call.  It will also always be a power
+	of two for easy alignment.
 
-For reasons of efficiency, most platforms choose to track the declared
-region only at the granularity of a page.  For smaller allocations,
-you should use the dma_pool() API.
 
 Part III - Debug drivers use of the DMA-API
 -------------------------------------------
diff --git linux-libre-5.9-gnu/Documentation/core-api/dma-attributes.rst linux-libre-5.10-rc7-gnu/Documentation/core-api/dma-attributes.rst
index 29dcbe8826e8..1887d92e8e92 100644
--- linux-libre-5.9-gnu/Documentation/core-api/dma-attributes.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/core-api/dma-attributes.rst
@@ -25,14 +25,6 @@ Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE,
 those that do not will simply ignore the attribute and exhibit default
 behavior.
 
-DMA_ATTR_NON_CONSISTENT
------------------------
-
-DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either
-consistent or non-consistent memory as it sees fit.  By using this API,
-you are guaranteeing to the platform that you have all the correct and
-necessary sync points for this memory in the driver.
-
 DMA_ATTR_NO_KERNEL_MAPPING
 --------------------------
 
diff --git linux-libre-5.9-gnu/Documentation/core-api/genericirq.rst linux-libre-5.10-rc7-gnu/Documentation/core-api/genericirq.rst
index 8f06d885c310..f959c9b53f61 100644
--- linux-libre-5.9-gnu/Documentation/core-api/genericirq.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/core-api/genericirq.rst
@@ -419,6 +419,7 @@ functions which are exported.
 .. kernel-doc:: kernel/irq/manage.c
 
 .. kernel-doc:: kernel/irq/chip.c
+   :export:
 
 Internal Functions Provided
 ===========================
@@ -431,6 +432,7 @@ functions.
 .. kernel-doc:: kernel/irq/handle.c
 
 .. kernel-doc:: kernel/irq/chip.c
+   :internal:
 
 Credits
 =======
diff --git linux-libre-5.9-gnu/Documentation/core-api/kernel-api.rst linux-libre-5.10-rc7-gnu/Documentation/core-api/kernel-api.rst
index 4ac53a1363f6..741aa37dc181 100644
--- linux-libre-5.9-gnu/Documentation/core-api/kernel-api.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/core-api/kernel-api.rst
@@ -231,12 +231,6 @@ Refer to the file kernel/module.c for more information.
 Hardware Interfaces
 ===================
 
-Interrupt Handling
-------------------
-
-.. kernel-doc:: kernel/irq/manage.c
-   :export:
-
 DMA Channels
 ------------
 
diff --git linux-libre-5.9-gnu/Documentation/core-api/workqueue.rst linux-libre-5.10-rc7-gnu/Documentation/core-api/workqueue.rst
index 00a5ba51e63f..541d31de8926 100644
--- linux-libre-5.9-gnu/Documentation/core-api/workqueue.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/core-api/workqueue.rst
@@ -396,3 +396,5 @@ Kernel Inline Documentations Reference
 ======================================
 
 .. kernel-doc:: include/linux/workqueue.h
+
+.. kernel-doc:: kernel/workqueue.c
diff --git linux-libre-5.9-gnu/Documentation/core-api/xarray.rst linux-libre-5.10-rc7-gnu/Documentation/core-api/xarray.rst
index 640934b6f7b4..a137a0e6d068 100644
--- linux-libre-5.9-gnu/Documentation/core-api/xarray.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/core-api/xarray.rst
@@ -475,13 +475,15 @@ or iterations will move the index to the first index in the range.
 Each entry will only be returned once, no matter how many indices it
 occupies.
 
-Using xas_next() or xas_prev() with a multi-index xa_state
-is not supported.  Using either of these functions on a multi-index entry
-will reveal sibling entries; these should be skipped over by the caller.
-
-Storing ``NULL`` into any index of a multi-index entry will set the entry
-at every index to ``NULL`` and dissolve the tie.  Splitting a multi-index
-entry into entries occupying smaller ranges is not yet supported.
+Using xas_next() or xas_prev() with a multi-index xa_state is not
+supported.  Using either of these functions on a multi-index entry will
+reveal sibling entries; these should be skipped over by the caller.
+
+Storing ``NULL`` into any index of a multi-index entry will set the
+entry at every index to ``NULL`` and dissolve the tie.  A multi-index
+entry can be split into entries occupying smaller ranges by calling
+xas_split_alloc() without the xa_lock held, followed by taking the lock
+and calling xas_split().
 
 Functions and structures
 ========================
diff --git linux-libre-5.9-gnu/Documentation/crypto/userspace-if.rst linux-libre-5.10-rc7-gnu/Documentation/crypto/userspace-if.rst
index 52019e905900..b45dabbf69d6 100644
--- linux-libre-5.9-gnu/Documentation/crypto/userspace-if.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/crypto/userspace-if.rst
@@ -296,15 +296,16 @@ follows:
 
     struct sockaddr_alg sa = {
         .salg_family = AF_ALG,
-        .salg_type = "rng", /* this selects the symmetric cipher */
-        .salg_name = "drbg_nopr_sha256" /* this is the cipher name */
+        .salg_type = "rng", /* this selects the random number generator */
+        .salg_name = "drbg_nopr_sha256" /* this is the RNG name */
     };
 
 
 Depending on the RNG type, the RNG must be seeded. The seed is provided
 using the setsockopt interface to set the key. For example, the
 ansi_cprng requires a seed. The DRBGs do not require a seed, but may be
-seeded.
+seeded. The seed is also known as a *Personalization String* in NIST SP 800-90A
+standard.
 
 Using the read()/recvmsg() system calls, random numbers can be obtained.
 The kernel generates at most 128 bytes in one call. If user space
@@ -314,6 +315,16 @@ WARNING: The user space caller may invoke the initially mentioned accept
 system call multiple times. In this case, the returned file descriptors
 have the same state.
 
+Following CAVP testing interfaces are enabled when kernel is built with
+CRYPTO_USER_API_RNG_CAVP option:
+
+-  the concatenation of *Entropy* and *Nonce* can be provided to the RNG via
+   ALG_SET_DRBG_ENTROPY setsockopt interface. Setting the entropy requires
+   CAP_SYS_ADMIN permission.
+
+-  *Additional Data* can be provided using the send()/sendmsg() system calls,
+   but only after the entropy has been set.
+
 Zero-Copy Interface
 -------------------
 
@@ -377,6 +388,9 @@ mentioned optname:
    provided ciphertext is assumed to contain an authentication tag of
    the given size (see section about AEAD memory layout below).
 
+-  ALG_SET_DRBG_ENTROPY -- Setting the entropy of the random number generator.
+   This option is applicable to RNG cipher type only.
+
 User space API example
 ----------------------
 
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kasan.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kasan.rst
index 38fd5681fade..2b68addaadcd 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kasan.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kasan.rst
@@ -13,10 +13,10 @@ KASAN uses compile-time instrumentation to insert validity checks before every
 memory access, and therefore requires a compiler version that supports that.
 
 Generic KASAN is supported in both GCC and Clang. With GCC it requires version
-8.3.0 or later. With Clang it requires version 7.0.0 or later, but detection of
+8.3.0 or later. Any supported Clang version is compatible, but detection of
 out-of-bounds accesses for global variables is only supported since Clang 11.
 
-Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later.
+Tag-based KASAN is only supported in Clang.
 
 Currently generic KASAN is supported for the x86_64, arm64, xtensa, s390 and
 riscv architectures, and tag-based KASAN is supported only for arm64.
@@ -281,3 +281,75 @@ unmapped. This will require changes in arch-specific code.
 
 This allows ``VMAP_STACK`` support on x86, and can simplify support of
 architectures that do not have a fixed module region.
+
+CONFIG_KASAN_KUNIT_TEST & CONFIG_TEST_KASAN_MODULE
+--------------------------------------------------
+
+``CONFIG_KASAN_KUNIT_TEST`` utilizes the KUnit Test Framework for testing.
+This means each test focuses on a small unit of functionality and
+there are a few ways these tests can be run.
+
+Each test will print the KASAN report if an error is detected and then
+print the number of the test and the status of the test:
+
+pass::
+
+        ok 28 - kmalloc_double_kzfree
+
+or, if kmalloc failed::
+
+        # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163
+        Expected ptr is not null, but is
+        not ok 4 - kmalloc_large_oob_right
+
+or, if a KASAN report was expected, but not found::
+
+        # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:629
+        Expected kasan_data->report_expected == kasan_data->report_found, but
+        kasan_data->report_expected == 1
+        kasan_data->report_found == 0
+        not ok 28 - kmalloc_double_kzfree
+
+All test statuses are tracked as they run and an overall status will
+be printed at the end::
+
+        ok 1 - kasan
+
+or::
+
+        not ok 1 - kasan
+
+(1) Loadable Module
+~~~~~~~~~~~~~~~~~~~~
+
+With ``CONFIG_KUNIT`` enabled, ``CONFIG_KASAN_KUNIT_TEST`` can be built as
+a loadable module and run on any architecture that supports KASAN
+using something like insmod or modprobe. The module is called ``test_kasan``.
+
+(2) Built-In
+~~~~~~~~~~~~~
+
+With ``CONFIG_KUNIT`` built-in, ``CONFIG_KASAN_KUNIT_TEST`` can be built-in
+on any architecure that supports KASAN. These and any other KUnit
+tests enabled will run and print the results at boot as a late-init
+call.
+
+(3) Using kunit_tool
+~~~~~~~~~~~~~~~~~~~~~
+
+With ``CONFIG_KUNIT`` and ``CONFIG_KASAN_KUNIT_TEST`` built-in, we can also
+use kunit_tool to see the results of these along with other KUnit
+tests in a more readable way. This will not print the KASAN reports
+of tests that passed. Use `KUnit documentation <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_ for more up-to-date
+information on kunit_tool.
+
+.. _KUnit: https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html
+
+``CONFIG_TEST_KASAN_MODULE`` is a set of KASAN tests that could not be
+converted to KUnit. These tests can be run only as a module with
+``CONFIG_TEST_KASAN_MODULE`` built as a loadable module and
+``CONFIG_KASAN`` built-in. The type of error expected and the
+function being run is printed before the expression expected to give
+an error. Then the error is printed, if found, and that test
+should be interpretted to pass only if the error was the one expected
+by the test.
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kgdb.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kgdb.rst
index c908ef4d3f04..77b688e6a254 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kgdb.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kgdb.rst
@@ -726,7 +726,7 @@ The kernel debugger is organized into a number of components:
    -  contains an arch-specific trap catcher which invokes
       kgdb_handle_exception() to start kgdb about doing its work
 
-   -  translation to and from gdb specific packet format to :c:type:`pt_regs`
+   -  translation to and from gdb specific packet format to struct pt_regs
 
    -  Registration and unregistration of architecture specific trap
       hooks
@@ -846,7 +846,7 @@ invokes a callback in the serial core which in turn uses the callback in
 the UART driver.
 
 When using kgdboc with a UART, the UART driver must implement two
-callbacks in the :c:type:`struct uart_ops <uart_ops>`.
+callbacks in the struct uart_ops.
 Example from ``drivers/8250.c``::
 
 
@@ -875,7 +875,7 @@ kernel when ``CONFIG_KDB_KEYBOARD=y`` is set in the kernel configuration.
 The core polled keyboard driver for PS/2 type keyboards is in
 ``drivers/char/kdb_keyboard.c``. This driver is hooked into the debug core
 when kgdboc populates the callback in the array called
-:c:type:`kdb_poll_funcs[]`. The kdb_get_kbd_char() is the top-level
+:c:expr:`kdb_poll_funcs[]`. The kdb_get_kbd_char() is the top-level
 function which polls hardware for single character input.
 
 kgdboc and kms
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kmemleak.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kmemleak.rst
index a41a2d238af2..1c935f41cd3a 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kmemleak.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kmemleak.rst
@@ -229,7 +229,7 @@ Testing with kmemleak-test
 
 To check if you have all set up to use kmemleak, you can use the kmemleak-test
 module, a module that deliberately leaks memory. Set CONFIG_DEBUG_KMEMLEAK_TEST
-as module (it can't be used as bult-in) and boot the kernel with kmemleak
+as module (it can't be used as built-in) and boot the kernel with kmemleak
 enabled. Load the module and perform a scan with::
 
         # modprobe kmemleak-test
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kselftest.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kselftest.rst
index 469d115a95f1..a901def730d9 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kselftest.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kselftest.rst
@@ -125,32 +125,41 @@ Note that some tests will require root privileges.
 Install selftests
 =================
 
-You can use the kselftest_install.sh tool to install selftests in the
-default location, which is tools/testing/selftests/kselftest, or in a
-user specified location.
+You can use the "install" target of "make" (which calls the `kselftest_install.sh`
+tool) to install selftests in the default location (`tools/testing/selftests/kselftest_install`),
+or in a user specified location via the `INSTALL_PATH` "make" variable.
 
 To install selftests in default location::
 
-   $ cd tools/testing/selftests
-   $ ./kselftest_install.sh
+   $ make -C tools/testing/selftests install
 
 To install selftests in a user specified location::
 
-   $ cd tools/testing/selftests
-   $ ./kselftest_install.sh install_dir
+   $ make -C tools/testing/selftests install INSTALL_PATH=/some/other/path
 
 Running installed selftests
 ===========================
 
-Kselftest install as well as the Kselftest tarball provide a script
-named "run_kselftest.sh" to run the tests.
+Found in the install directory, as well as in the Kselftest tarball,
+is a script named `run_kselftest.sh` to run the tests.
 
 You can simply do the following to run the installed Kselftests. Please
 note some tests will require root privileges::
 
-   $ cd kselftest
+   $ cd kselftest_install
    $ ./run_kselftest.sh
 
+To see the list of available tests, the `-l` option can be used::
+
+   $ ./run_kselftest.sh -l
+
+The `-c` option can be used to run all the tests from a test collection, or
+the `-t` option for specific single tests. Either can be used multiple times::
+
+   $ ./run_kselftest.sh -c bpf -c seccomp -t timers:posix_timers -t timer:nanosleep
+
+For other features see the script usage output, seen with the `-h` option.
+
 Packaging selftests
 ===================
 
@@ -160,9 +169,9 @@ different system. To package selftests, run::
    $ make -C tools/testing/selftests gen_tar
 
 This generates a tarball in the `INSTALL_PATH/kselftest-packages` directory. By
-default, `.gz` format is used. The tar format can be overridden by specifying
-a `FORMAT` make variable. Any value recognized by `tar's auto-compress`_ option
-is supported, such as::
+default, `.gz` format is used. The tar compression format can be overridden by
+specifying a `FORMAT` make variable. Any value recognized by `tar's auto-compress`_
+option is supported, such as::
 
     $ make -C tools/testing/selftests gen_tar FORMAT=.xz
 
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kunit/faq.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/faq.rst
index 1628862e7024..8d5029ad210a 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kunit/faq.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/faq.rst
@@ -90,7 +90,7 @@ things to try.
    re-run kunit_tool.
 5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
    may help clean up any residual config items which could be causing problems.
-6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can be
    built into any kernel, or can be built as a module and loaded at runtime.
    Doing so should allow you to determine if UML is causing the issue you're
    seeing. When tests are built-in, they will execute when the kernel boots, and
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kunit/index.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/index.rst
index e93606ecfb01..c234a3ab3c34 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kunit/index.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/index.rst
@@ -11,6 +11,7 @@ KUnit - Unit Testing for the Linux Kernel
 	usage
 	kunit-tool
 	api/index
+	style
 	faq
 
 What is KUnit?
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kunit/start.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/start.rst
index d23385e3e159..454f307813ea 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kunit/start.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/start.rst
@@ -197,7 +197,7 @@ Now add the following to ``drivers/misc/Kconfig``:
 
 	config MISC_EXAMPLE_TEST
 		bool "Test for my example"
-		depends on MISC_EXAMPLE && KUNIT
+		depends on MISC_EXAMPLE && KUNIT=y
 
 and the following to ``drivers/misc/Makefile``:
 
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kunit/style.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/style.rst
new file mode 100644
index 000000000000..8dbcdc552606
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/style.rst
@@ -0,0 +1,205 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Test Style and Nomenclature
+===========================
+
+To make finding, writing, and using KUnit tests as simple as possible, it's
+strongly encouraged that they are named and written according to the guidelines
+below. While it's possible to write KUnit tests which do not follow these rules,
+they may break some tooling, may conflict with other tests, and may not be run
+automatically by testing systems.
+
+It's recommended that you only deviate from these guidelines when:
+
+1. Porting tests to KUnit which are already known with an existing name, or
+2. Writing tests which would cause serious problems if automatically run (e.g.,
+   non-deterministically producing false positives or negatives, or taking an
+   extremely long time to run).
+
+Subsystems, Suites, and Tests
+=============================
+
+In order to make tests as easy to find as possible, they're grouped into suites
+and subsystems. A test suite is a group of tests which test a related area of
+the kernel, and a subsystem is a set of test suites which test different parts
+of the same kernel subsystem or driver.
+
+Subsystems
+----------
+
+Every test suite must belong to a subsystem. A subsystem is a collection of one
+or more KUnit test suites which test the same driver or part of the kernel. A
+rule of thumb is that a test subsystem should match a single kernel module. If
+the code being tested can't be compiled as a module, in many cases the subsystem
+should correspond to a directory in the source tree or an entry in the
+MAINTAINERS file. If unsure, follow the conventions set by tests in similar
+areas.
+
+Test subsystems should be named after the code being tested, either after the
+module (wherever possible), or after the directory or files being tested. Test
+subsystems should be named to avoid ambiguity where necessary.
+
+If a test subsystem name has multiple components, they should be separated by
+underscores. *Do not* include "test" or "kunit" directly in the subsystem name
+unless you are actually testing other tests or the kunit framework itself.
+
+Example subsystems could be:
+
+``ext4``
+  Matches the module and filesystem name.
+``apparmor``
+  Matches the module name and LSM name.
+``kasan``
+  Common name for the tool, prominent part of the path ``mm/kasan``
+``snd_hda_codec_hdmi``
+  Has several components (``snd``, ``hda``, ``codec``, ``hdmi``) separated by
+  underscores. Matches the module name.
+
+Avoid names like these:
+
+``linear-ranges``
+  Names should use underscores, not dashes, to separate words. Prefer
+  ``linear_ranges``.
+``qos-kunit-test``
+  As well as using underscores, this name should not have "kunit-test" as a
+  suffix, and ``qos`` is ambiguous as a subsystem name. ``power_qos`` would be a
+  better name.
+``pc_parallel_port``
+  The corresponding module name is ``parport_pc``, so this subsystem should also
+  be named ``parport_pc``.
+
+.. note::
+        The KUnit API and tools do not explicitly know about subsystems. They're
+        simply a way of categorising test suites and naming modules which
+        provides a simple, consistent way for humans to find and run tests. This
+        may change in the future, though.
+
+Suites
+------
+
+KUnit tests are grouped into test suites, which cover a specific area of
+functionality being tested. Test suites can have shared initialisation and
+shutdown code which is run for all tests in the suite.
+Not all subsystems will need to be split into multiple test suites (e.g. simple drivers).
+
+Test suites are named after the subsystem they are part of. If a subsystem
+contains several suites, the specific area under test should be appended to the
+subsystem name, separated by an underscore.
+
+In the event that there are multiple types of test using KUnit within a
+subsystem (e.g., both unit tests and integration tests), they should be put into
+separate suites, with the type of test as the last element in the suite name.
+Unless these tests are actually present, avoid using ``_test``, ``_unittest`` or
+similar in the suite name.
+
+The full test suite name (including the subsystem name) should be specified as
+the ``.name`` member of the ``kunit_suite`` struct, and forms the base for the
+module name (see below).
+
+Example test suites could include:
+
+``ext4_inode``
+  Part of the ``ext4`` subsystem, testing the ``inode`` area.
+``kunit_try_catch``
+  Part of the ``kunit`` implementation itself, testing the ``try_catch`` area.
+``apparmor_property_entry``
+  Part of the ``apparmor`` subsystem, testing the ``property_entry`` area.
+``kasan``
+  The ``kasan`` subsystem has only one suite, so the suite name is the same as
+  the subsystem name.
+
+Avoid names like:
+
+``ext4_ext4_inode``
+  There's no reason to state the subsystem twice.
+``property_entry``
+  The suite name is ambiguous without the subsystem name.
+``kasan_integration_test``
+  Because there is only one suite in the ``kasan`` subsystem, the suite should
+  just be called ``kasan``. There's no need to redundantly add
+  ``integration_test``. Should a separate test suite with, for example, unit
+  tests be added, then that suite could be named ``kasan_unittest`` or similar.
+
+Test Cases
+----------
+
+Individual tests consist of a single function which tests a constrained
+codepath, property, or function. In the test output, individual tests' results
+will show up as subtests of the suite's results.
+
+Tests should be named after what they're testing. This is often the name of the
+function being tested, with a description of the input or codepath being tested.
+As tests are C functions, they should be named and written in accordance with
+the kernel coding style.
+
+.. note::
+        As tests are themselves functions, their names cannot conflict with
+        other C identifiers in the kernel. This may require some creative
+        naming. It's a good idea to make your test functions `static` to avoid
+        polluting the global namespace.
+
+Example test names include:
+
+``unpack_u32_with_null_name``
+  Tests the ``unpack_u32`` function when a NULL name is passed in.
+``test_list_splice``
+  Tests the ``list_splice`` macro. It has the prefix ``test_`` to avoid a
+  name conflict with the macro itself.
+
+
+Should it be necessary to refer to a test outside the context of its test suite,
+the *fully-qualified* name of a test should be the suite name followed by the
+test name, separated by a colon (i.e. ``suite:test``).
+
+Test Kconfig Entries
+====================
+
+Every test suite should be tied to a Kconfig entry.
+
+This Kconfig entry must:
+
+* be named ``CONFIG_<name>_KUNIT_TEST``: where <name> is the name of the test
+  suite.
+* be listed either alongside the config entries for the driver/subsystem being
+  tested, or be under [Kernel Hacking]→[Kernel Testing and Coverage]
+* depend on ``CONFIG_KUNIT``
+* be visible only if ``CONFIG_KUNIT_ALL_TESTS`` is not enabled.
+* have a default value of ``CONFIG_KUNIT_ALL_TESTS``.
+* have a brief description of KUnit in the help text
+
+Unless there's a specific reason not to (e.g. the test is unable to be built as
+a module), Kconfig entries for tests should be tristate.
+
+An example Kconfig entry:
+
+.. code-block:: none
+
+	config FOO_KUNIT_TEST
+		tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
+		depends on KUNIT
+		default KUNIT_ALL_TESTS
+		help
+		  This builds unit tests for foo.
+
+		  For more information on KUnit and unit tests in general, please refer
+		  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+		  If unsure, say N.
+
+
+Test File and Module Names
+==========================
+
+KUnit tests can often be compiled as a module. These modules should be named
+after the test suite, followed by ``_test``. If this is likely to conflict with
+non-KUnit tests, the suffix ``_kunit`` can also be used.
+
+The easiest way of achieving this is to name the file containing the test suite
+``<suite>_test.c`` (or, as above, ``<suite>_kunit.c``). This file should be
+placed next to the code under test.
+
+If the suite name contains some or all of the name of the test's parent
+directory, it may make sense to modify the source filename to reduce redundancy.
+For example, a ``foo_firmware`` suite could be in the ``foo/firmware_test.c``
+file.
diff --git linux-libre-5.9-gnu/Documentation/dev-tools/kunit/usage.rst linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/usage.rst
index 3c3fe8b5fecc..9c28c518e6a3 100644
--- linux-libre-5.9-gnu/Documentation/dev-tools/kunit/usage.rst
+++ linux-libre-5.10-rc7-gnu/Documentation/dev-tools/kunit/usage.rst
@@ -92,7 +92,7 @@ behavior of a function called ``add``; the first parameter is always of type
 the second parameter, in this case, is what the value is expected to be; the
 last value is what the value actually is. If ``add`` passes all of these
 expectations, the test case, ``add_test_basic`` will pass; if any one of these
-expectations fail, the test case will fail.
+expectations fails, the test case will fail.
 
 It is important to understand that a test case *fails* when any expectation is
 violated; however, the test will continue running, potentially trying other
@@ -202,7 +202,7 @@ Example:
 	kunit_test_suite(example_test_suite);
 
 In the above example the test suite, ``example_test_suite``, would run the test
-cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``,
+cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``;
 each would have ``example_test_init`` called immediately before it and would
 have ``example_test_exit`` called immediately after it.
 ``kunit_test_suite(example_test_suite)`` registers the test suite with the
@@ -211,6 +211,11 @@ KUnit test framework.
 .. note::
    A test case will only be run if it is associated with a test suite.
 
+``kunit_test_suite(...)`` is a macro which tells the linker to put the specified
+test suite in a special linker section so that it can be run by KUnit either
+after late_init, or when the test module is loaded (depending on whether the
+test was built in or not).
+
 For more information on these types of things see the :doc:`api/test`.
 
 Isolating Behavior
@@ -224,7 +229,7 @@ through some sort of indirection where a function is exposed as part of an API
 such that the definition of that function can be changed without affecting the
 rest of the code base. In the kernel this primarily comes from two constructs,
 classes, structs that contain function pointers that are provided by the
-implementer, and architecture specific functions which have definitions selected
+implementer, and architecture-specific functions which have definitions selected
 at compile time.
 
 Classes
@@ -454,7 +459,7 @@ KUnit on non-UML architectures
 By default KUnit uses UML as a way to provide dependencies for code under test.
 Under most circumstances KUnit's usage of UML should be treated as an
 implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture specific code or test
+are instances where being able to run architecture-specific code or test
 against real hardware is desirable. For these reasons KUnit supports running on
 other architectures.
 
@@ -556,6 +561,11 @@ Once the kernel is built and installed, a simple
 
 ...will run the tests.
 
+.. note::
+   Note that you should make sure your test depends on ``KUNIT=y`` in Kconfig
+   if the test does not support module build.  Otherwise, it will trigger
+   compile errors if ``CONFIG_KUNIT`` is ``m``.
+
 Writing new tests for other architectures
 -----------------------------------------
 
@@ -589,7 +599,7 @@ writing normal KUnit tests. One special caveat is that you have to reset
 hardware state in between test cases; if this is not possible, you may only be
 able to run one test case per invocation.
 
-.. TODO(brendanhiggins@google.com): Add an actual example of an architecture
+.. TODO(brendanhiggins@google.com): Add an actual example of an architecture-
    dependent KUnit test.
 
 KUnit debugfs representation
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/.gitignore linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/.gitignore
index 5c6d8ea1a09c..3a05b99bfa26 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/.gitignore
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/.gitignore
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 *.example.dts
 processed-schema*.yaml
+processed-schema*.json
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/.yamllint linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/.yamllint
new file mode 100644
index 000000000000..214abd3ec440
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/.yamllint
@@ -0,0 +1,39 @@
+extends: relaxed
+
+rules:
+  line-length:
+    # 80 chars should be enough, but don't fail if a line is longer
+    max: 110
+    allow-non-breakable-words: true
+    level: warning
+  braces:
+    min-spaces-inside: 0
+    max-spaces-inside: 1
+    min-spaces-inside-empty: 0
+    max-spaces-inside-empty: 0
+  brackets:
+    min-spaces-inside: 0
+    max-spaces-inside: 1
+    min-spaces-inside-empty: 0
+    max-spaces-inside-empty: 0
+  colons: {max-spaces-before: 0, max-spaces-after: 1}
+  commas: {min-spaces-after: 1, max-spaces-after: 1}
+  comments:
+    require-starting-space: false
+    min-spaces-from-content: 1
+  comments-indentation: disable
+  document-start:
+    present: true
+  empty-lines:
+    max: 3
+    max-end: 1
+  empty-values:
+    forbid-in-block-mappings: true
+    forbid-in-flow-mappings: true
+  hyphens:
+    max-spaces-after: 1
+  indentation:
+    spaces: 2
+    indent-sequences: true
+    check-multi-line-strings: false
+  trailing-spaces: false
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/Makefile linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/Makefile
index 91c4d00e96d3..f50420099a55 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/Makefile
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/Makefile
@@ -3,7 +3,9 @@ DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
 
-DT_SCHEMA_MIN_VERSION = 2020.5
+DT_SCHEMA_LINT = $(shell which yamllint)
+
+DT_SCHEMA_MIN_VERSION = 2020.8.1
 
 PHONY += check_dtschema_version
 check_dtschema_version:
@@ -11,26 +13,40 @@ check_dtschema_version:
 	$(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -VC || \
 	{ echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; }
 
-quiet_cmd_chk_binding = CHKDT   $(patsubst $(srctree)/%,%,$<)
-      cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
-                        $(DT_EXTRACT_EX) $< > $@
+quiet_cmd_extract_ex = DTEX    $@
+      cmd_extract_ex = $(DT_EXTRACT_EX) $< > $@
 
 $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
-	$(call if_changed,chk_binding)
+	$(call if_changed,extract_ex)
 
 # Use full schemas when checking %.example.dts
-DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml
+DT_TMP_SCHEMA := $(obj)/processed-schema-examples.json
 
 find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
 		-name 'processed-schema*' ! \
 		-name '*.example.dt.yaml' \)
 
+quiet_cmd_yamllint = LINT    $(src)
+      cmd_yamllint = $(find_cmd) | \
+                     xargs $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint
+
+quiet_cmd_chk_bindings = CHKDT   $@
+      cmd_chk_bindings = $(find_cmd) | \
+                         xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)
+
 quiet_cmd_mk_schema = SCHEMA  $@
-      cmd_mk_schema = rm -f $@ ; \
+      cmd_mk_schema = f=$$(mktemp) ; \
                       $(if $(DT_MK_SCHEMA_FLAGS), \
                            echo $(real-prereqs), \
-                           $(find_cmd)) | \
-                      xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@
+                           $(find_cmd)) > $$f ; \
+                      $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
+		      rm -f $$f
+
+define rule_chkdt
+	$(if $(DT_SCHEMA_LINT),$(call cmd,yamllint),)
+	$(call cmd,chk_bindings)
+	$(call cmd,mk_schema)
+endef
 
 DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
@@ -39,33 +55,33 @@ override DTC_FLAGS := \
 	-Wno-graph_child_address \
 	-Wno-interrupt_provider
 
-$(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
-	$(call if_changed,mk_schema)
+$(obj)/processed-schema-examples.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
+	$(call if_changed_rule,chkdt)
 
 ifeq ($(DT_SCHEMA_FILES),)
 
 # Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
-# Just copy processed-schema-examples.yaml
+# Just copy processed-schema-examples.json
 
-$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE
+$(obj)/processed-schema.json: $(obj)/processed-schema-examples.json FORCE
 	$(call if_changed,copy)
 
 DT_SCHEMA_FILES = $(DT_DOCS)
 
 else
 
-# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml
+# If DT_SCHEMA_FILES is specified, use it for processed-schema.json
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
-$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
+$(obj)/processed-schema.json: DT_MK_SCHEMA_FLAGS := -u
+$(obj)/processed-schema.json: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
 endif
 
+extra-$(CHECK_DT_BINDING) += processed-schema-examples.json
+extra-$(CHECK_DTBS) += processed-schema.json
 extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
 extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
-extra-$(CHECK_DTBS) += processed-schema.yaml
 
 # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
 # build artifacts here before they are processed by scripts/Makefile.clean
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/actions.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/actions.yaml
index ace3fdaa8396..02dc72c97645 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/actions.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/actions.yaml
@@ -11,6 +11,8 @@ maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC.
@@ -18,6 +20,12 @@ properties:
           - enum:
               - allo,sparky # Allo.com Sparky
               - cubietech,cubieboard6 # Cubietech CubieBoard6
+              - roseapplepi,roseapplepi # RoseapplePi.org RoseapplePi
+          - const: actions,s500
+      - items:
+          - enum:
+              - caninos,labrador-base-m # Labrador Base Board M v1
+          - const: caninos,labrador-v2  # Labrador Core v2
           - const: actions,s500
       - items:
           - enum:
@@ -26,6 +34,11 @@ properties:
           - const: actions,s500
 
       # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
+      - items:
+          - enum:
+              - caninos,labrador-base-m2 # Labrador Base Board M v2
+          - const: caninos,labrador-v3   # Labrador Core v3
+          - const: actions,s700
       - items:
           - enum:
               - cubietech,cubieboard7 # Cubietech CubieBoard7
@@ -36,3 +49,5 @@ properties:
           - enum:
               - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96
           - const: actions,s900
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/altera.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/altera.yaml
index b388c5aa7984..c15c92fdf2ed 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/altera.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/altera.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     items:
       - enum:
@@ -17,4 +19,7 @@ properties:
           - altr,socfpga-arria5
           - altr,socfpga-arria10
       - const: altr,socfpga
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/amazon,al.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/amazon,al.yaml
index a3a4d710bd02..0f03135d91b6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/amazon,al.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/amazon,al.yaml
@@ -30,4 +30,6 @@ properties:
               - amazon,al-alpine-v3-evp
           - const: amazon,al-alpine-v3
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
index 5eba9f48823e..3341788d1096 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -96,6 +96,7 @@ properties:
               - hwacom,amazetv
               - khadas,vim
               - libretech,aml-s905x-cc
+              - libretech,aml-s905x-cc-v2
               - nexbox,a95x
           - const: amlogic,s905x
           - const: amlogic,meson-gxl
@@ -153,6 +154,7 @@ properties:
               - azw,gtking
               - azw,gtking-pro
               - hardkernel,odroid-n2
+              - hardkernel,odroid-n2-plus
               - khadas,vim3
               - ugoos,am6
           - const: amlogic,s922x
@@ -171,4 +173,7 @@ properties:
           - enum:
               - amlogic,ad401
           - const: amlogic,a1
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,integrator.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,integrator.yaml
index f0daf990e077..528eee64290a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,integrator.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -83,4 +83,6 @@ required:
   - compatible
   - core-module@10000000
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml
index 1d0b4e2bc7d2..4f9b21f49e84 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -120,4 +120,6 @@ required:
   - compatible
   - soc
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,versatile.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,versatile.yaml
index 06efd2a075c9..34b437c72751 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,versatile.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -68,4 +68,6 @@ required:
   - compatible
   - core-module@10000000
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index 26829a803fda..55ef656d1192 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -216,4 +216,6 @@ allOf:
       required:
         - arm,hbi
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index 31b0c54fa2cf..6fc5a22ad962 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -41,6 +41,7 @@ properties:
               - overkiz,kizboxmini-mb   # Overkiz kizbox Mini Mother Board
               - overkiz,kizboxmini-rd   # Overkiz kizbox Mini RailDIN
               - overkiz,smartkiz        # Overkiz SmartKiz Board
+              - gardena,smart-gateway-at91sam # GARDENA smart Gateway (Article No. 19000)
           - const: atmel,at91sam9g25
           - const: atmel,at91sam9x5
           - const: atmel,at91sam9
@@ -183,4 +184,6 @@ properties:
           - const: atmel,samv71
           - const: atmel,samv7
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/axxia.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/axxia.yaml
index 98780a569f22..e0d2bb71cf50 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/axxia.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/axxia.yaml
@@ -10,10 +10,14 @@ maintainers:
   - Anders Berg <anders.berg@lsi.com>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     description: LSI AXM5516 Validation board (Amarillo)
     items:
       - const: lsi,axm5516-amarillo
       - const: lsi,axm5516
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index dd52e29b0642..812ae8cc5959 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -51,4 +51,6 @@ properties:
               - raspberrypi,3-compute-module-lite
           - const: brcm,bcm2837
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
index 497600a2ffb9..c60324357435 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -18,4 +18,6 @@ properties:
           - brcm,bcm28155-ap
       - const: brcm,bcm11351
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
index e0ee931723dc..b3020757380f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -18,4 +18,6 @@ properties:
           - brcm,bcm21664-garnet
       - const: brcm,bcm21664
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
index 40d12ea56e54..37f3a6fcde76 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -18,4 +18,6 @@ properties:
           - brcm,bcm23550-sparrow
       - const: brcm,bcm23550
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index d48313c7ae45..434d3c6db61e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -83,6 +83,11 @@ properties:
               - brcm,bcm953012er
               - brcm,bcm953012hr
               - brcm,bcm953012k
+              - meraki,mr32
           - const: brcm,brcm53012
+          - const: brcm,brcm53016
           - const: brcm,bcm4708
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
index 9ba7b16e1fc4..432ccf990f9e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -26,4 +26,6 @@ properties:
           - brcm,bcm58305
       - const: brcm,cygnus
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
index ae614b6722c2..294948399f82 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -25,4 +25,6 @@ properties:
       - const: brcm,bcm53342
       - const: brcm,hr2
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
index 0749adf94c28..c4847abbecd8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -20,4 +20,6 @@ properties:
           - brcm,ns2-xmc
       - const: brcm,ns2
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
index 8c2cacb2bb4f..476bc23a7f75 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -33,4 +33,6 @@ properties:
           - brcm,bcm88312
       - const: brcm,nsp
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
index c13cb96545a2..c638e04ebae0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -21,4 +21,6 @@ properties:
           - brcm,bcm958802a802x
       - const: brcm,stingray
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
index ccdf9f99cb2b..4eba182abd53 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -19,4 +19,6 @@ properties:
           - cavium,thunderx2-cn9900
       - const: brcm,vulcan-soc
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 6834f5e8df5f..a2c63c8b1d10 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -48,12 +48,30 @@ properties:
       - compatible
       - "#clock-cells"
 
+  reset:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-reset
+
+      "#reset-cells":
+        const: 1
+        description: >
+          The argument is the ID of the firmware reset line to affect.
+
+    required:
+      - compatible
+      - "#reset-cells"
+
     additionalProperties: false
 
 required:
   - compatible
   - mboxes
 
+additionalProperties: false
+
 examples:
   - |
     firmware {
@@ -64,5 +82,10 @@ examples:
             compatible = "raspberrypi,firmware-clocks";
             #clock-cells = <1>;
         };
+
+        reset: reset {
+            compatible = "raspberrypi,firmware-reset";
+            #reset-cells = <1>;
+        };
     };
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bitmain.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bitmain.yaml
index 5cd5b36cff2d..90ba02be48ce 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/bitmain.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -10,9 +10,14 @@ maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     items:
       - enum:
           - bitmain,sophon-edge
       - const: bitmain,bm1880
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/calxeda.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/calxeda.yaml
index aa5571d23c39..46f78addebb0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/calxeda.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/calxeda.yaml
@@ -20,3 +20,5 @@ properties:
       - enum:
           - calxeda,highbank
           - calxeda,ecx-2000
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/coresight-cti.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/coresight-cti.yaml
index e42ff69d8bfb..21e3515491f4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/coresight-cti.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/coresight-cti.yaml
@@ -220,6 +220,8 @@ then:
   required:
     - cpu
 
+unevaluatedProperties: false
+
 examples:
   # minimum CTI definition. DEVID register used to set number of triggers.
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/cpus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
index 1222bf1831fa..14cd727d3c4b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -341,6 +341,8 @@ required:
 dependencies:
   rockchip,pmu: [enable-method]
 
+additionalProperties: true
+
 examples:
   - |
     cpus {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/digicolor.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/digicolor.yaml
index d9c80b827e9b..a35de3c9e284 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/digicolor.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/digicolor.yaml
@@ -10,7 +10,11 @@ maintainers:
   - Baruch Siach <baruch@tkos.co.il>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     const: cnxt,cx92755
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
deleted file mode 100644
index 75195bee116f..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Freescale i.MX7ULP Power Management Components
-----------------------------------------------
-
-The Multi-System Mode Controller (MSMC) is responsible for sequencing
-the MCU into and out of all stop and run power modes. Specifically, it
-monitors events to trigger transitions between power modes while
-controlling the power, clocks, and memories of the MCU to achieve the
-power consumption and functionality of that mode.
-
-The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
-Standby modes for either Cortex family. Run, Wait, and Stop are the
-common terms used for the primary operating modes of Kinetis
-microcontrollers.
-
-Required properties:
-- compatible:	Should be "fsl,imx7ulp-smc1".
-- reg:		Specifies base physical address and size of the register sets.
-
-Example:
-smc1: smc1@40410000 {
-	compatible = "fsl,imx7ulp-smc1";
-	reg = <0x40410000 0x1000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
new file mode 100644
index 000000000000..3b26040f8f18
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Power Management Components
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  The Multi-System Mode Controller (MSMC) is responsible for sequencing
+  the MCU into and out of all stop and run power modes. Specifically, it
+  monitors events to trigger transitions between power modes while
+  controlling the power, clocks, and memories of the MCU to achieve the
+  power consumption and functionality of that mode.
+
+  The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
+  Standby modes for either Cortex family. Run, Wait, and Stop are the
+  common terms used for the primary operating modes of Kinetis
+  microcontrollers.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-smc1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smc1@40410000 {
+        compatible = "fsl,imx7ulp-smc1";
+        reg = <0x40410000 0x1000>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt
deleted file mode 100644
index 7d0c7f002401..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Freescale i.MX7ULP System Integration Module
-----------------------------------------------
-The system integration module (SIM) provides system control and chip configuration
-registers. In this module, chip revision information is located in JTAG ID register,
-and a set of registers have been made available in DGO domain for SW use, with the
-objective to maintain its value between system resets.
-
-Required properties:
-- compatible:	Should be "fsl,imx7ulp-sim".
-- reg:		Specifies base physical address and size of the register sets.
-
-Example:
-sim: sim@410a3000 {
-	compatible = "fsl,imx7ulp-sim", "syscon";
-	reg = <0x410a3000 0x1000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
new file mode 100644
index 000000000000..526f508cb98d
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-sim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP System Integration Module
+
+maintainers:
+  - Anson Huang <anson.huang@nxp.com>
+
+description: |
+  The system integration module (SIM) provides system control and chip configuration
+  registers. In this module, chip revision information is located in JTAG ID register,
+  and a set of registers have been made available in DGO domain for SW use, with the
+  objective to maintain its value between system resets.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx7ulp-sim
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sim@410a3000 {
+        compatible = "fsl,imx7ulp-sim", "syscon";
+        reg = <0x410a3000 0x1000>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/fsl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
index 6da9d734cdb7..934289446abb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -120,6 +120,7 @@ properties:
               - fsl,imx6q-sabrelite
               - fsl,imx6q-sabresd
               - kontron,imx6q-samx6i      # Kontron i.MX6 Dual/Quad SMARC Module
+              - logicpd,imx6q-logicpd
               - prt,prti6q                # Protonic PRTI6Q board
               - prt,prtwd2                # Protonic WD2 board
               - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
@@ -156,6 +157,21 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6q
 
+      - description: i.MX6Q PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6q-pbac06-emmc  # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6q-pbac06-nand  # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6q-pbac06    # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6q-pbab01    # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6q-pfla02    # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6q
+
       - description: i.MX6QP based Boards
         items:
           - enum:
@@ -163,6 +179,13 @@ properties:
               - fsl,imx6qp-sabresd        # i.MX6 Quad Plus SABRE Smart Device Board
           - const: fsl,imx6qp
 
+      - description: i.MX6QP PHYTEC phyBOARD-Mira
+        items:
+          - const: phytec,imx6qp-pbac06-nand
+          - const: phytec,imx6qp-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6qp
+
       - description: i.MX6DL based Boards
         items:
           - enum:
@@ -188,6 +211,7 @@ properties:
               - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3
               - ysoft,imx6dl-yapp4-draco  # i.MX6 DualLite Y Soft IOTA Draco board
               - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
+              - ysoft,imx6dl-yapp4-orion  # i.MX6 DualLite Y Soft IOTA Orion board
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
           - const: fsl,imx6dl
 
@@ -211,10 +235,26 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6dl
 
+      - description: i.MX6DL PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6dl-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6dl-pbab01   # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6dl-pfla02   # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,tolino-shine2hd
               - kobo,tolino-shine3
           - const: fsl,imx6sl
 
@@ -246,6 +286,15 @@ properties:
               - technexion,imx6ul-pico-pi      # TechNexion i.MX6UL Pico-Pi
           - const: fsl,imx6ul
 
+      - description: i.MX6UL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ul-pbacd10-emmc
+              - phytec,imx6ul-pbacd10-nand
+          - const: phytec,imx6ul-pbacd10  # PHYTEC phyBOARD-Segin with i.MX6 UL
+          - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
+          - const: fsl,imx6ul
+
       - description: Kontron N6310 S Board
         items:
           - const: kontron,imx6ul-n6310-s
@@ -277,6 +326,15 @@ properties:
               - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ull-pbacd10-emmc
+              - phytec,imx6ull-pbacd10-nand
+          - const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063  # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
       - description: Kontron N6411 S Board
         items:
           - const: kontron,imx6ull-n6411-s
@@ -344,7 +402,16 @@ properties:
       - description: i.MX8MM based Boards
         items:
           - enum:
+              - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
+              - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+          - const: fsl,imx8mm
+
+      - description: Variscite VAR-SOM-MX8MM based boards
+        items:
+          - const: variscite,var-som-mx8mm-symphony
+          - const: variscite,var-som-mx8mm
           - const: fsl,imx8mm
 
       - description: i.MX8MN based Boards
@@ -354,6 +421,12 @@ properties:
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
           - const: fsl,imx8mn
 
+      - description: Variscite VAR-SOM-MX8MN based boards
+        items:
+          - const: variscite,var-som-mx8mn-symphony
+          - const: variscite,var-som-mx8mn
+          - const: fsl,imx8mn
+
       - description: i.MX8MP based Boards
         items:
           - enum:
@@ -372,13 +445,35 @@ properties:
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
           - const: fsl,imx8mq
 
+      - description: Purism Librem5 phones
+        items:
+          - enum:
+              - purism,librem5r2          # Purism Librem5 phone "Chestnut"
+              - purism,librem5r3          # Purism Librem5 phone "Dogwood"
+          - const: purism,librem5
+          - const: fsl,imx8mq
+
+      - description: Zodiac Inflight Innovations Ultra Boards
+        items:
+          - enum:
+              - zii,imx8mq-ultra-rmb3
+              - zii,imx8mq-ultra-zest
+          - const: zii,imx8mq-ultra
+          - const: fsl,imx8mq
+
       - description: i.MX8QXP based Boards
         items:
           - enum:
               - einfochips,imx8qxp-ai_ml  # i.MX8QXP AI_ML Board
               - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
               - toradex,colibri-imx8x         # Colibri iMX8X Module
+          - const: fsl,imx8qxp
+
+      - description: Toradex Colibri i.MX8 Evaluation Board
+        items:
+          - enum:
               - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
+          - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
       - description:
@@ -526,4 +621,6 @@ properties:
               - fsl,s32v234-evb           # S32V234-EVB2 Customer Evaluation Board
           - const: fsl,s32v234
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
new file mode 100644
index 000000000000..528dad4cde3c
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/cpuctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon CPU controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The clock registers and power registers of secondary cores are defined
+  in CPU controller, especially in HIX5HD2 SoC.
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,cpuctrl
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    cpuctrl@a22000 {
+        compatible = "hisilicon,cpuctrl";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x00a22000 0x2000>;
+        ranges = <0 0x00a22000 0x2000>;
+
+        clock: clock@0 {
+            compatible = "hisilicon,hix5hd2-clock";
+            reg = <0 0x2000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml
new file mode 100644
index 000000000000..cba1937aad9a
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi3798cv200-perictrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Hi3798CV200 Peripheral Controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The Hi3798CV200 Peripheral Controller controls peripherals, queries
+  their status, and configures some functions of peripherals.
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hi3798cv200-perictrl
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    peripheral-controller@8a20000 {
+        compatible = "hisilicon,hi3798cv200-perictrl", "syscon", "simple-mfd";
+        reg = <0x8a20000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x8a20000 0x1000>;
+
+        phy@850 {
+            compatible = "hisilicon,hi3798cv200-combphy";
+            reg = <0x850 0x8>;
+            #phy-cells = <1>;
+            clocks = <&crg 42>;
+            resets = <&crg 0x188 4>;
+            assigned-clocks = <&crg 42>;
+            assigned-clock-rates = <100000000>;
+            hisilicon,fixed-mode = <4>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
new file mode 100644
index 000000000000..6ea6d7ee7a14
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi6220-domain-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Hi6220 domain controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Hisilicon designs some special domain controllers for mobile platform,
+  such as: the power Always On domain controller, the Media domain
+  controller(e.g. codec, G3D ...) and the Power Management domain
+  controller.
+
+  The compatible names of each domain controller are as follows:
+  Power Always ON domain controller  --> hisilicon,hi6220-aoctrl
+  Media domain controller            --> hisilicon,hi6220-mediactrl
+  Power Management domain controller --> hisilicon,hi6220-pmctrl
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - hisilicon,hi6220-aoctrl
+          - hisilicon,hi6220-mediactrl
+          - hisilicon,hi6220-pmctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ao_ctrl@f7800000 {
+        compatible = "hisilicon,hi6220-aoctrl", "syscon";
+        reg = <0xf7800000 0x2000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+    media_ctrl@f4410000 {
+        compatible = "hisilicon,hi6220-mediactrl", "syscon";
+        reg = <0xf4410000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+    pm_ctrl@f7032000 {
+        compatible = "hisilicon,hi6220-pmctrl", "syscon";
+        reg = <0xf7032000 0x1000>;
+        #clock-cells = <1>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
new file mode 100644
index 000000000000..7378159e61df
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-bootwrapper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bootwrapper boot method
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Bootwrapper boot method (software protocol on SMP)
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hip04-bootwrapper
+
+  boot-method:
+    description: |
+      Address and size of boot method.
+      [0]: bootwrapper physical address
+      [1]: bootwrapper size
+      [2]: relocation physical address
+      [3]: relocation size
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - boot-method
+
+additionalProperties: false
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml
new file mode 100644
index 000000000000..60c516a04ad5
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-fabric.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Fabric controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Hisilicon Fabric controller
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hip04-fabric
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml
new file mode 100644
index 000000000000..6d5065872809
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/pctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral misc control register
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Peripheral misc control register
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,pctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pctrl@fca09000 {
+        compatible = "hisilicon,pctrl";
+        reg = <0xfca09000 0x1000>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
new file mode 100644
index 000000000000..5a53d433b6f0
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon system controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The Hisilicon system controller is used on many Hisilicon boards, it can be
+  used to assist the slave core startup, reboot the system, etc.
+
+  There are some variants of the Hisilicon system controller, such as HiP01,
+  Hi3519, Hi6220 system controller, each of them is mostly compatible with the
+  Hisilicon system controller, but some same registers located at different
+  offset. In addition, the HiP01 system controller has some specific control
+  registers for HIP01 SoC family, such as slave core boot.
+
+  The compatible names of each system controller are as follows:
+  Hisilicon system controller   --> hisilicon,sysctrl
+  HiP01     system controller   --> hisilicon,hip01-sysctrl
+  Hi6220    system controller   --> hisilicon,hi6220-sysctrl
+  Hi3519    system controller   --> hisilicon,hi3519-sysctrl
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: hisilicon,hi6220-sysctrl
+    then:
+      required:
+        - '#clock-cells'
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - hisilicon,sysctrl
+              - hisilicon,hi6220-sysctrl
+              - hisilicon,hi3519-sysctrl
+          - const: syscon
+      - items:
+          - const: hisilicon,hip01-sysctrl
+          - const: hisilicon,sysctrl
+
+  reg:
+    maxItems: 1
+
+  smp-offset:
+    description: |
+      offset in sysctrl for notifying slave cpu booting
+      cpu 1, reg;
+      cpu 2, reg + 0x4;
+      cpu 3, reg + 0x8;
+      If reg value is not zero, cpun exit wfi and go
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  resume-offset:
+    description: offset in sysctrl for notifying cpu0 when resume
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  reboot-offset:
+    description: offset in sysctrl for system reboot
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    /* Hisilicon system controller */
+    system-controller@802000 {
+        compatible = "hisilicon,sysctrl", "syscon";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x802000 0x1000>;
+        reg = <0x802000 0x1000>;
+
+        smp-offset = <0x31c>;
+        resume-offset = <0x308>;
+        reboot-offset = <0x4>;
+
+        clock: clock@0 {
+            compatible = "hisilicon,hi3620-clock";
+            reg = <0 0x10000>;
+            #clock-cells = <1>;
+        };
+    };
+
+    /* HiP01 system controller */
+    system-controller@10000000 {
+        compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+        reg = <0x10000000 0x1000>;
+        reboot-offset = <0x4>;
+    };
+
+    /* Hi6220 system controller */
+    system-controller@f7030000 {
+        compatible = "hisilicon,hi6220-sysctrl", "syscon";
+        reg = <0xf7030000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+    /* Hi3519 system controller */
+    system-controller@12010000 {
+        compatible = "hisilicon,hi3519-sysctrl", "syscon";
+        reg = <0x12010000 0x1000>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt
deleted file mode 100644
index 8defacc44dd5..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Hisilicon Hi3519 System Controller Block
-
-This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.yaml
-
-Required properties:
-- compatible: "hisilicon,hi3519-sysctrl".
-- reg: the register region of this block
-
-Examples:
-sysctrl: system-controller@12010000 {
-	compatible = "hisilicon,hi3519-sysctrl", "syscon";
-	reg = <0x12010000 0x1000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
deleted file mode 100644
index 10bd35f9207f..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Hisilicon Hip06 Low Pin Count device
-  Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
-  provides I/O access to some legacy ISA devices.
-  Hip06 is based on arm64 architecture where there is no I/O space. So, the
-  I/O ports here are not CPU addresses, and there is no 'ranges' property in
-  LPC device node.
-
-Required properties:
-- compatible:  value should be as follows:
-	(a) "hisilicon,hip06-lpc"
-	(b) "hisilicon,hip07-lpc"
-- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
-- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
-- reg: base memory range where the LPC register set is mapped.
-
-Note:
-  The node name before '@' must be "isa" to represent the binding stick to the
-  ISA/EISA binding specification.
-
-Example:
-
-isa@a01b0000 {
-	compatible = "hisilicon,hip06-lpc";
-	#address-cells = <2>;
-	#size-cells = <1>;
-	reg = <0x0 0xa01b0000 0x0 0x1000>;
-
-	ipmi0: bt@e4 {
-		compatible = "ipmi-bt";
-		device_type = "ipmi";
-		reg = <0x01 0xe4 0x04>;
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
deleted file mode 100644
index a97f643e7d1c..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-Hisilicon Platforms Device Tree Bindings
-----------------------------------------------------
-Hi3660 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi3660";
-
-HiKey960 Board
-Required root node properties:
-	- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
-
-Hi3670 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi3670";
-
-HiKey970 Board
-Required root node properties:
-	- compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
-
-Hi3798cv200 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi3798cv200";
-
-Hi3798cv200 Poplar Board
-Required root node properties:
-	- compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
-
-Hi4511 Board
-Required root node properties:
-	- compatible = "hisilicon,hi3620-hi4511";
-
-Hi6220 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi6220";
-
-HiKey Board
-Required root node properties:
-	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
-
-HiP01 ca9x2 Board
-Required root node properties:
-	- compatible = "hisilicon,hip01-ca9x2";
-
-HiP04 D01 Board
-Required root node properties:
-	- compatible = "hisilicon,hip04-d01";
-
-HiP05 D02 Board
-Required root node properties:
-	- compatible = "hisilicon,hip05-d02";
-
-HiP06 D03 Board
-Required root node properties:
-	- compatible = "hisilicon,hip06-d03";
-
-HiP07 D05 Board
-Required root node properties:
-	- compatible = "hisilicon,hip07-d05";
-
-Hisilicon system controller
-
-Required properties:
-- compatible : "hisilicon,sysctrl"
-- reg : Register address and size
-
-Optional properties:
-- smp-offset : offset in sysctrl for notifying slave cpu booting
-		cpu 1, reg;
-		cpu 2, reg + 0x4;
-		cpu 3, reg + 0x8;
-		If reg value is not zero, cpun exit wfi and go
-- resume-offset : offset in sysctrl for notifying cpu0 when resume
-- reboot-offset : offset in sysctrl for system reboot
-
-Example:
-
-	/* for Hi3620 */
-	sysctrl: system-controller@fc802000 {
-		compatible = "hisilicon,sysctrl";
-		reg = <0xfc802000 0x1000>;
-		smp-offset = <0x31c>;
-		resume-offset = <0x308>;
-		reboot-offset = <0x4>;
-	};
-
------------------------------------------------------------------------
-Hisilicon Hi3798CV200 Peripheral Controller
-
-The Hi3798CV200 Peripheral Controller controls peripherals, queries
-their status, and configures some functions of peripherals.
-
-Required properties:
-- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"
-  and "simple-mfd".
-- reg: Register address and size of Peripheral Controller.
-- #address-cells: Should be 1.
-- #size-cells: Should be 1.
-
-Examples:
-
-	perictrl: peripheral-controller@8a20000 {
-		compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
-			     "simple-mfd";
-		reg = <0x8a20000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
------------------------------------------------------------------------
-Hisilicon Hi6220 system controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-sysctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this controller as one of the system controllers,
-its main functions are the same as Hisilicon system controller, but
-the register offset of some core modules are different.
-
-Example:
-	/*for Hi6220*/
-	sys_ctrl: sys_ctrl@f7030000 {
-		compatible = "hisilicon,hi6220-sysctrl", "syscon";
-		reg = <0x0 0xf7030000 0x0 0x2000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Power Always ON domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-aoctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the power always
-on domain for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	ao_ctrl: ao_ctrl@f7800000 {
-		compatible = "hisilicon,hi6220-aoctrl", "syscon";
-		reg = <0x0 0xf7800000 0x0 0x2000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Media domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-mediactrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the multimedia
-domain(e.g. codec, G3D ...) for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	media_ctrl: media_ctrl@f4410000 {
-		compatible = "hisilicon,hi6220-mediactrl", "syscon";
-		reg = <0x0 0xf4410000 0x0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Power Management domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-pmctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, some clock registers are define
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the power management
-domain for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	pm_ctrl: pm_ctrl@f7032000 {
-		compatible = "hisilicon,hi6220-pmctrl", "syscon";
-		reg = <0x0 0xf7032000 0x0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 SRAM controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-sramctrl", "syscon"
-- reg : Register address and size
-
-Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
-SRAM banks for power management, modem, security, etc. Further, use "syscon"
-managing the common sram which can be shared by multiple modules.
-
-Example:
-	/*for Hi6220*/
-	sram: sram@fff80000 {
-		compatible = "hisilicon,hi6220-sramctrl", "syscon";
-		reg = <0x0 0xfff80000 0x0 0x12000>;
-	};
-
------------------------------------------------------------------------
-Hisilicon HiP01 system controller
-
-Required properties:
-- compatible : "hisilicon,hip01-sysctrl"
-- reg : Register address and size
-
-The HiP01 system controller is mostly compatible with hisilicon
-system controller,but it has some specific control registers for
-HIP01 SoC family, such as slave core boot, and also some same
-registers located at different offset.
-
-Example:
-
-	/* for hip01-ca9x2 */
-	sysctrl: system-controller@10000000 {
-		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
-		reg = <0x10000000 0x1000>;
-		reboot-offset = <0x4>;
-	};
-
------------------------------------------------------------------------
-Hisilicon HiP05/HiP06 PCIe-SAS sub system controller
-
-Required properties:
-- compatible : "hisilicon,pcie-sas-subctrl", "syscon";
-- reg : Register address and size
-
-The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in
-HiP05 or HiP06 Soc to implement some basic configurations.
-
-Example:
-	/* for HiP05 PCIe-SAS sub system */
-	pcie_sas: system_controller@b0000000 {
-		compatible = "hisilicon,pcie-sas-subctrl", "syscon";
-		reg = <0xb0000000 0x10000>;
-	};
-
-Hisilicon HiP05/HiP06 PERI sub system controller
-
-Required properties:
-- compatible : "hisilicon,peri-subctrl", "syscon";
-- reg : Register address and size
-
-The PERI sub system controller is shared by peripheral controllers in
-HiP05 or HiP06 Soc to implement some basic configurations. The peripheral
-controllers include mdio, ddr, iic, uart, timer and so on.
-
-Example:
-	/* for HiP05 sub peri system */
-	peri_c_subctrl: syscon@80000000 {
-		compatible = "hisilicon,peri-subctrl", "syscon";
-		reg = <0x0 0x80000000 0x0 0x10000>;
-	};
-
-Hisilicon HiP05/HiP06 DSA sub system controller
-
-Required properties:
-- compatible : "hisilicon,dsa-subctrl", "syscon";
-- reg : Register address and size
-
-The DSA sub system controller is shared by peripheral controllers in
-HiP05 or HiP06 Soc to implement some basic configurations.
-
-Example:
-	/* for HiP05 dsa sub system */
-	pcie_sas: system_controller@a0000000 {
-		compatible = "hisilicon,dsa-subctrl", "syscon";
-		reg = <0xa0000000 0x10000>;
-	};
-
------------------------------------------------------------------------
-Hisilicon CPU controller
-
-Required properties:
-- compatible : "hisilicon,cpuctrl"
-- reg : Register address and size
-
-The clock registers and power registers of secondary cores are defined
-in CPU controller, especially in HIX5HD2 SoC.
-
------------------------------------------------------------------------
-PCTRL: Peripheral misc control register
-
-Required Properties:
-- compatible: "hisilicon,pctrl"
-- reg: Address and size of pctrl.
-
-Example:
-
-	/* for Hi3620 */
-	pctrl: pctrl@fca09000 {
-		compatible = "hisilicon,pctrl";
-		reg = <0xfca09000 0x1000>;
-	};
-
------------------------------------------------------------------------
-Fabric:
-
-Required Properties:
-- compatible: "hisilicon,hip04-fabric";
-- reg: Address and size of Fabric
-
------------------------------------------------------------------------
-Bootwrapper boot method (software protocol on SMP):
-
-Required Properties:
-- compatible: "hisilicon,hip04-bootwrapper";
-- boot-method: Address and size of boot method.
-  [0]: bootwrapper physical address
-  [1]: bootwrapper size
-  [2]: relocation physical address
-  [3]: relocation size
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
new file mode 100644
index 000000000000..b38458022946
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Platforms Device Tree Bindings
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Hi3660 based boards.
+        items:
+          - const: hisilicon,hi3660-hikey960
+          - const: hisilicon,hi3660
+
+      - description: Hi3670 based boards.
+        items:
+          - const: hisilicon,hi3670-hikey970
+          - const: hisilicon,hi3670
+
+      - description: Hi3798cv200 based boards.
+        items:
+          - const: hisilicon,hi3798cv200-poplar
+          - const: hisilicon,hi3798cv200
+
+      - description: Hi4511 Board
+        items:
+          - const: hisilicon,hi3620-hi4511
+
+      - description: Hi6220 based boards.
+        items:
+          - const: hisilicon,hi6220-hikey
+          - const: hisilicon,hi6220
+
+      - description: HiP01 based boards.
+        items:
+          - const: hisilicon,hip01-ca9x2
+          - const: hisilicon,hip01
+
+      - description: HiP04 D01 Board
+        items:
+          - const: hisilicon,hip04-d01
+
+      - description: HiP05 D02 Board
+        items:
+          - const: hisilicon,hip05-d02
+
+      - description: HiP06 D03 Board
+        items:
+          - const: hisilicon,hip06-d03
+
+      - description: HiP07 D05 Board
+        items:
+          - const: hisilicon,hip07-d05
+
+      - description: SD5203 based boards
+        items:
+          - const: H836ASDJ
+          - const: hisilicon,sd5203
+
+additionalProperties: true
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
new file mode 100644
index 000000000000..3b36e683bb15
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/low-pin-count.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon HiP06 Low Pin Count device
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Hisilicon HiP06 SoCs implement a Low Pin Count (LPC) controller, which
+  provides I/O access to some legacy ISA devices.
+  HiP06 is based on arm64 architecture where there is no I/O space. So, the
+  I/O ports here are not CPU addresses, and there is no 'ranges' property in
+  LPC device node.
+
+properties:
+  $nodename:
+    pattern: '^isa@[0-9a-f]+$'
+    description: |
+      The node name before '@' must be "isa" to represent the binding stick
+      to the ISA/EISA binding specification.
+
+  compatible:
+    enum:
+      - hisilicon,hip06-lpc
+      - hisilicon,hip07-lpc
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    isa@a01b0000 {
+        compatible = "hisilicon,hip06-lpc";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        reg = <0xa01b0000 0x1000>;
+
+        ipmi0: bt@e4 {
+            compatible = "ipmi-bt";
+            device_type = "ipmi";
+            reg = <0x01 0xe4 0x04>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/intel,keembay.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/intel,keembay.yaml
index 06a7b05f435f..69cd30872928 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/intel,keembay.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -16,4 +16,7 @@ properties:
       - enum:
           - intel,keembay-evm
       - const: intel,keembay
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
index f4f7451e5e8a..d72e92bdf7c1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       - items:
@@ -20,3 +22,5 @@ properties:
           - enum:
               - gateworks,gw2358
           - const: intel,ixp43x
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
index 7597bc93a55f..5cbcacaeb441 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
@@ -42,3 +42,5 @@ properties:
       - description: TI-SCI processor id for the remote processor device
       - description: TI-SCI host id to which processor control ownership
                      should be transferred to
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
index a9828c50c0fb..e9bf3054529f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -59,3 +59,5 @@ properties:
           - const: marvell,cn9130
           - const: marvell,armada-ap807-quad
           - const: marvell,armada-ap807
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
index 30908963ae26..f736e8c859fa 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -119,4 +119,7 @@ properties:
           - const: google,krane-sku176
           - const: google,krane
           - const: mediatek,mt8183
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
index bd7a0fa5801b..ea827e8763de 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -15,6 +15,7 @@ Required Properties:
 	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt7629-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
+	- "mediatek,mt8167-apmixedsys", "syscon"
 	- "mediatek,mt8173-apmixedsys"
 	- "mediatek,mt8183-apmixedsys", "syscon"
 	- "mediatek,mt8516-apmixedsys"
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
index 38309db115f5..b32d374193c7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt6779-audio", "syscon"
 	- "mediatek,mt7622-audsys", "syscon"
 	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
+	- "mediatek,mt8167-audiosys", "syscon"
 	- "mediatek,mt8183-audiosys", "syscon"
 	- "mediatek,mt8516-audsys", "syscon"
 - #clock-cells: Must be 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
index 1e1f00718a7d..dce4c9241932 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
@@ -12,6 +12,7 @@ Required Properties:
 	- "mediatek,mt6779-imgsys", "syscon"
 	- "mediatek,mt6797-imgsys", "syscon"
 	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
+	- "mediatek,mt8167-imgsys", "syscon"
 	- "mediatek,mt8173-imgsys", "syscon"
 	- "mediatek,mt8183-imgsys", "syscon"
 - #clock-cells: Must be 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index 49a968be1a80..eb3523c7a7be 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -16,6 +16,7 @@ Required Properties:
 	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt7629-infracfg", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
+	- "mediatek,mt8167-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
 	- "mediatek,mt8183-infracfg", "syscon"
 	- "mediatek,mt8516-infracfg", "syscon"
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
index ad5f9d2f6818..054424fb64b4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2712-mfgcfg", "syscon"
 	- "mediatek,mt6779-mfgcfg", "syscon"
+	- "mediatek,mt8167-mfgcfg", "syscon"
 	- "mediatek,mt8183-mfgcfg", "syscon"
 - #clock-cells: Must be 1
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
index 1af30174b2d0..8723dfe34bab 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -47,6 +47,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     pericfg@10003000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
index 9b0394cbbdc9..5ce7578cf274 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -15,6 +15,7 @@ Required Properties:
 	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
 	- "mediatek,mt7629-topckgen"
 	- "mediatek,mt8135-topckgen"
+	- "mediatek,mt8167-topckgen", "syscon"
 	- "mediatek,mt8173-topckgen"
 	- "mediatek,mt8183-topckgen", "syscon"
 	- "mediatek,mt8516-topckgen"
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
index 7894558b7a1c..98195169176a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt6779-vdecsys", "syscon"
 	- "mediatek,mt6797-vdecsys", "syscon"
 	- "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
+	- "mediatek,mt8167-vdecsys", "syscon"
 	- "mediatek,mt8173-vdecsys", "syscon"
 	- "mediatek,mt8183-vdecsys", "syscon"
 - #clock-cells: Must be 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
index ecf6fa12e6ad..6193388c6318 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -62,4 +62,6 @@ required:
   - compatible
   - axi@600000000
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/moxart.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/moxart.yaml
index c068df59fad2..670d24ce8ec5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/moxart.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/moxart.yaml
@@ -16,4 +16,5 @@ properties:
       - const: moxa,moxart-uc-7112-lx
       - const: moxa,moxart
 
+additionalProperties: true
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 3235ec9e9bad..d58116136154 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -35,4 +35,7 @@ properties:
           - enum:
               - dell,wyse-ariel
           - const: marvell,mmp3
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mstar/mstar.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
index c2f980b00b06..7c787405bb2f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -31,3 +31,5 @@ properties:
           - enum:
               - 70mai,midrived08 # 70mai midrive d08
           - const: mstar,mercury5
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
index 1043e4be4fca..c9675c4cdc1b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
@@ -30,6 +30,8 @@ properties:
       Specifies the bpmp node that needs to be queried to get
       operating point data for all CPUs.
 
+additionalProperties: true
+
 examples:
   - |
     cpus {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
index f7f024910e71..214c97bc3063 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -21,4 +21,6 @@ properties:
               - ea,ea3250
               - phytec,phy3250
           - const: nxp,lpc3250
+
+additionalProperties: true
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/omap/prm-inst.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
index fcd3456afbbe..42db138e091a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -18,6 +18,7 @@ Required properties:
 		(base address and length)
 
 Optional properties:
+- #power-domain-cells:	Should be 0 if the instance is a power domain provider.
 - #reset-cells:	Should be 1 if the PRM instance in question supports resets.
 
 Example:
@@ -25,5 +26,6 @@ Example:
 prm_dsp2: prm@1b00 {
 	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
 	reg = <0x1b00 0x40>;
+	#power-domain-cells = <0>;
 	#reset-cells = <1>;
 };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/pmu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/pmu.yaml
index 97df36d301c9..693ef3f185a8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/pmu.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -93,4 +93,6 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/primecell.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/primecell.yaml
index 5aae37f1c563..e15fe00aafb2 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/primecell.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/primecell.yaml
@@ -33,4 +33,7 @@ properties:
     contains:
       const: apb_pclk
     additionalItems: true
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index 6031aee0f5a8..c97d4a580f47 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -40,6 +40,7 @@ description: |
         sdm630
         sdm660
         sdm845
+        sm8250
 
   The 'board' element must be one of the following strings:
 
@@ -47,6 +48,8 @@ description: |
         cp01-c1
         dragonboard
         hk01
+        hk10-c1
+        hk10-c2
         idp
         liquid
         mtp
@@ -73,6 +76,8 @@ description: |
   foundry 2.
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       - items:
@@ -148,6 +153,8 @@ properties:
       - items:
           - enum:
               - qcom,ipq8074-hk01
+              - qcom,ipq8074-hk10-c1
+              - qcom,ipq8074-hk10-c2
           - const: qcom,ipq8074
 
       - items:
@@ -165,4 +172,12 @@ properties:
               - qcom,ipq6018-cp01-c1
           - const: qcom,ipq6018
 
+      - items:
+          - enum:
+              - qcom,qrb5165-rb5
+              - qcom,sm8250-mtp
+          - const: qcom,sm8250
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/rda.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/rda.yaml
index 51cec2b63b04..a5c0444aa2b4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/rda.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/rda.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     items:
       - enum:
@@ -17,4 +19,6 @@ properties:
           - xunlong,orangepi-i96        # Orange Pi i96
       - const: rda,8810pl
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/realtek.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/realtek.yaml
index 845f9c76d6f7..9fb0297fe1ce 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/realtek.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/realtek.yaml
@@ -54,4 +54,7 @@ properties:
           - enum:
               - realtek,mjolnir # Realtek Mjolnir EVB
           - const: realtek,rtd1619
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/renesas.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/renesas.yaml
index 0d4dabb4a164..ff94c45eefb0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/renesas.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -281,10 +281,24 @@ properties:
               - renesas,draak # Draak (RTP0RC77995SEB0010S)
           - const: renesas,r8a77995
 
+      - description: R-Car V3U (R8A779A0)
+        items:
+          - enum:
+              - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
+          - const: renesas,r8a779a0
+
+      - items:
+          - enum:
+              - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
+          - const: renesas,falcon-cpu
+          - const: renesas,r8a779a0
+
       - description: RZ/N1D (R9A06G032)
         items:
           - enum:
               - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
           - const: renesas,r9a06g032
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
index db2e35796795..b621752aaa65 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -104,6 +104,11 @@ properties:
               - firefly,roc-rk3399-pc-mezzanine
           - const: rockchip,rk3399
 
+      - description: FriendlyElec NanoPi R2S
+        items:
+          - const: friendlyarm,nanopi-r2s
+          - const: rockchip,rk3328
+
       - description: FriendlyElec NanoPi4 series boards
         items:
           - enum:
@@ -430,8 +435,12 @@ properties:
           - const: radxa,rock
           - const: rockchip,rk3188
 
-      - description: Radxa ROCK Pi 4
+      - description: Radxa ROCK Pi 4A/B/C
         items:
+          - enum:
+              - radxa,rockpi4a
+              - radxa,rockpi4b
+              - radxa,rockpi4c
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
@@ -555,4 +564,12 @@ properties:
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
+
+      - description: Zkmagic A95X Z2
+        items:
+          - const: zkmagic,a95x-z2
+          - const: rockchip,rk3318
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/samsung/pmu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
index c9651892710e..17678d9686c1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -24,6 +24,7 @@ select:
           - samsung,exynos5420-pmu
           - samsung,exynos5433-pmu
           - samsung,exynos7-pmu
+          - samsung-s5pv210-pmu
   required:
     - compatible
 
@@ -40,11 +41,15 @@ properties:
           - samsung,exynos5420-pmu
           - samsung,exynos5433-pmu
           - samsung,exynos7-pmu
+          - samsung-s5pv210-pmu
       - const: syscon
 
   reg:
     maxItems: 1
 
+  assigned-clock-parents: true
+  assigned-clocks: true
+
   '#clock-cells':
     const: 1
 
@@ -85,12 +90,28 @@ properties:
 required:
   - compatible
   - reg
-  - '#clock-cells'
-  - clock-names
-  - clocks
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-pmu
+              - samsung,exynos4210-pmu
+              - samsung,exynos4412-pmu
+              - samsung,exynos5250-pmu
+              - samsung,exynos5410-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+    then:
+      required:
+        - '#clock-cells'
+        - clock-names
+        - clocks
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index eb92f9eefaba..272508010b02 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -180,3 +180,5 @@ properties:
 
 required:
   - compatible
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml
deleted file mode 100644
index 3b7811804cb4..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml
+++ /dev/null
@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/sysreg.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung S5P/Exynos SoC series System Registers (SYSREG)
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-# Custom select to avoid matching all nodes with 'syscon'
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos4-sysreg
-          - samsung,exynos5-sysreg
-  required:
-    - compatible
-
-properties:
-  compatible:
-    allOf:
-      - items:
-          - enum:
-              - samsung,exynos4-sysreg
-              - samsung,exynos5-sysreg
-          - const: syscon
-
-  reg:
-    maxItems: 1
-
-examples:
-  - |
-    syscon@10010000 {
-        compatible = "samsung,exynos4-sysreg", "syscon";
-        reg = <0x10010000 0x400>;
-    };
-
-    syscon@10050000 {
-        compatible = "samsung,exynos5-sysreg", "syscon";
-        reg = <0x10050000 0x5000>;
-    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sirf.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sirf.yaml
index 0b597032c923..b25eb35d1b66 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sirf.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sirf.yaml
@@ -24,4 +24,7 @@ properties:
       - items:
           - const: sirf,prima2-cb
           - const: sirf,prima2
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
index 2bd519d2e855..aa1d4afbc510 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
@@ -19,4 +19,7 @@ properties:
           - enum:
               - socionext,milbeaut-m10v-evb
           - const: socionext,sc2000a
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
index 6caf1f9be390..8c0e91658474 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -60,3 +60,5 @@ properties:
           - enum:
               - socionext,uniphier-pxs3-ref
           - const: socionext,uniphier-pxs3
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/spear.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/spear.yaml
index f6ec731c9531..605ad3f882ef 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/spear.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/spear.yaml
@@ -22,4 +22,7 @@ properties:
           - st,spear320
           - st,spear1310
           - st,spear1340
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
index 0258a96bfbde..7b6ae3070396 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -30,4 +30,6 @@ properties:
               - sprd,sp9863a-1h10
           - const: sprd,sc9863a
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sti.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sti.yaml
index 47f9b8eebaa0..b1f28d16d3fb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sti.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sti.yaml
@@ -20,4 +20,7 @@ properties:
           - st,stih407
           - st,stih410
           - st,stih418
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 9f276bc9efa0..8e711bd202fd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -50,6 +50,8 @@ required:
   - '#size-cells'
   - dma-ranges
 
+unevaluatedProperties: false
+
 examples:
   - |
     mlahb: ahb@38000000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 790e6dd48e34..009b424e456e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Alexandre Torgue <alexandre.torgue@st.com>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       - items:
@@ -50,4 +52,13 @@ properties:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
+      - description: Odyssey STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - seeed,stm32mp157c-odyssey
+          - const: seeed,stm32mp157c-odyssey-som
+          - const: st,stm32mp157
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
index efc9118233b4..cab8e1b6417b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -16,6 +16,11 @@ properties:
   compatible:
     oneOf:
 
+      - description: Allwinner A100 Perf1 Board
+        items:
+          - const: allwinner,a100-perf1
+          - const: allwinner,sun50i-a100
+
       - description: Allwinner A23 Evaluation Board
         items:
           - const: allwinner,sun8i-a23-evb
@@ -626,6 +631,11 @@ properties:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PineCube
+        items:
+          - const: pine64,pinecube
+          - const: allwinner,sun8i-s3
+
       - description: Pine64 PineH64 model A
         items:
           - const: pine64,pine-h64
@@ -883,3 +893,5 @@ properties:
         items:
           - const: xunlong,orangepi-zero-plus2-h3
           - const: allwinner,sun8i-h3
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/tegra.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
index e0b3debaee9e..767e86354c8e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -11,6 +11,8 @@ maintainers:
   - Jonathan Hunter <jonathanh@nvidia.com>
 
 properties:
+  $nodename:
+    const: "/"
   compatible:
     oneOf:
       - items:
@@ -119,3 +121,9 @@ properties:
         items:
           - const: nvidia,p3509-0000+p3668-0000
           - const: nvidia,tegra194
+      - items:
+          - enum:
+              - nvidia,tegra234-vdk
+          - const: nvidia,tegra234
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
index 2d89cdc39eb0..576462fae27f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible: Should contain one of the following:
   - "nvidia,tegra186-pmc": for Tegra186
   - "nvidia,tegra194-pmc": for Tegra194
+  - "nvidia,tegra234-pmc": for Tegra234
 - reg: Must contain an (offset, length) pair of the register set for each
   entry in reg-names.
 - reg-names: Must include the following entries:
@@ -11,7 +12,7 @@ Required properties:
   - "wake"
   - "aotag"
   - "scratch"
-  - "misc" (Only for Tegra194)
+  - "misc" (Only for Tegra194 and later)
 
 Optional properties:
 - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
index b71a20af5f70..43fd2f8927d0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -308,6 +308,8 @@ required:
   - clocks
   - '#clock-cells'
 
+additionalProperties: false
+
 dependencies:
   "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
   "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ti/k3.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ti/k3.txt
deleted file mode 100644
index 333e7256126a..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ti/k3.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Texas Instruments K3 Multicore SoC architecture device tree bindings
---------------------------------------------------------------------
-
-Platforms based on Texas Instruments K3 Multicore SoC architecture
-shall follow the following scheme:
-
-SoCs
-----
-
-Each device tree root node must specify which exact SoC in K3 Multicore SoC
-architecture it uses, using one of the following compatible values:
-
-- AM654
-  compatible = "ti,am654";
-
-- J721E
-  compatible = "ti,j721e";
-
-Boards
-------
-
-In addition, each device tree root node must specify which one or more
-of the following board-specific compatible values:
-
-- AM654 EVM
-  compatible = "ti,am654-evm", "ti,am654";
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
new file mode 100644
index 000000000000..c6e1c1e63e43
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC architecture device tree bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Platforms based on Texas Instruments K3 Multicore SoC architecture
+  shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: K3 AM654 SoC
+        items:
+          - enum:
+              - ti,am654-evm
+          - const: ti,am654
+
+      - description: K3 J721E SoC
+        items:
+          - const: ti,j721e
+
+      - description: K3 J7200 SoC
+        items:
+          - const: ti,j7200
+
+additionalProperties: true
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ti/nspire.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ti/nspire.yaml
index e372b43da62f..cc2023bb7fa6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ti/nspire.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ti/nspire.yaml
@@ -21,4 +21,7 @@ properties:
           - ti,nspire-tp
           # Clickpad models
           - ti,nspire-clp
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
index a8765ba29476..c022d325fc08 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
@@ -23,4 +23,7 @@ properties:
           - enbw,cmc        # EnBW AM1808 based CMC board
           - lego,ev3        # LEGO MINDSTORMS EV3 (AM1808 based)
       - const: ti,da850
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/toshiba.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/toshiba.yaml
new file mode 100644
index 000000000000..001bbbcd1432
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/toshiba.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/toshiba.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti Platform Device Tree Bindings
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Visconti5 TMPV7708
+        items:
+          - enum:
+              - toshiba,tmpv7708-rm-mbrc  # TMPV7708 RM main board
+          - const: toshiba,tmpv7708
+
+additionalProperties: true
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ux500.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ux500.yaml
index accaee906050..5db7cfba81a4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/ux500.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -34,3 +34,5 @@ properties:
         items:
           - const: samsung,golden
           - const: st-ericsson,u8500
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml
index 7b25b6fa34e9..29ff399551ca 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml
@@ -21,3 +21,6 @@ properties:
           - wm,wm8650
           - wm,wm8750
           - wm,wm8850
+          
+additionalProperties: true
+
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/xilinx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/xilinx.yaml
index c73b1f5c7f49..e0c6787f6e94 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -111,4 +111,6 @@ properties:
           - const: xlnx,zynqmp-zcu111
           - const: xlnx,zynqmp
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/zte.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/zte.yaml
index 2d3fefdccdff..672f8129cd31 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/arm/zte.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/arm/zte.yaml
@@ -23,4 +23,6 @@ properties:
               - zte,zx296718-evb
           - const: zte,zx296718
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
index 6451928dd2ce..fa16f3767c6a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
@@ -64,6 +64,8 @@ allOf:
       required:
         - sata
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/imx-sata.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/imx-sata.txt
deleted file mode 100644
index 781f88751762..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/imx-sata.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Freescale i.MX AHCI SATA Controller
-
-The Freescale i.MX SATA controller mostly conforms to the AHCI interface
-with some special extensions at integration level.
-
-Required properties:
-- compatible : should be one of the following:
-   - "fsl,imx53-ahci" for i.MX53 SATA controller
-   - "fsl,imx6q-ahci" for i.MX6Q SATA controller
-   - "fsl,imx6qp-ahci" for i.MX6QP SATA controller
-- interrupts : interrupt mapping for SATA IRQ
-- reg : registers mapping
-- clocks : list of clock specifiers, must contain an entry for each
-  required entry in clock-names
-- clock-names : should include "sata", "sata_ref" and "ahb" entries
-
-Optional properties:
-- fsl,transmit-level-mV : transmit voltage level, in millivolts.
-- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels
-- fsl,transmit-atten-16ths : transmit attenuation, in 16ths
-- fsl,receive-eq-mdB : receive equalisation, in milli-decibels
-  Please refer to the technical documentation or the driver source code
-  for the list of legal values for these options.
-- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA
-  link.
-
-Examples:
-
-sata@2200000 {
-	compatible = "fsl,imx6q-ahci";
-	reg = <0x02200000 0x4000>;
-	interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX6QDL_CLK_SATA>,
-		 <&clks IMX6QDL_CLK_SATA_REF_100M>,
-		 <&clks IMX6QDL_CLK_AHB>;
-	clock-names = "sata", "sata_ref", "ahb";
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/imx-sata.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/imx-sata.yaml
new file mode 100644
index 000000000000..68ffb97ddc9b
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/imx-sata.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/imx-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX AHCI SATA Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Freescale i.MX SATA controller mostly conforms to the AHCI interface
+  with some special extensions at integration level.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ahci
+      - fsl,imx6q-ahci
+      - fsl,imx6qp-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: sata clock
+      - description: sata reference clock
+      - description: ahb clock
+
+  clock-names:
+    items:
+      - const: sata
+      - const: sata_ref
+      - const: ahb
+
+  fsl,transmit-level-mV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit voltage level, in millivolts.
+
+  fsl,transmit-boost-mdB:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit boost level, in milli-decibels.
+
+  fsl,transmit-atten-16ths:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit attenuation, in 16ths.
+
+  fsl,receive-eq-mdB:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: receive equalisation, in milli-decibels.
+
+  fsl,no-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: if present, disable spread-spectrum clocking on the SATA link.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sata@2200000 {
+        compatible = "fsl,imx6q-ahci";
+        reg = <0x02200000 0x4000>;
+        interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_SATA>,
+                 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+                 <&clks IMX6QDL_CLK_AHB>;
+        clock-names = "sata", "sata_ref", "ahb";
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/pata-common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/pata-common.yaml
index fc5ebbe7108d..2412894a255d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/pata-common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/pata-common.yaml
@@ -47,4 +47,6 @@ patternProperties:
           The ID number of the drive port, 0 for the master port and 1 for the
           slave port.
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/sata-common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/sata-common.yaml
index 6783a4dec6b5..7ac77b1c5850 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/ata/sata-common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -47,4 +47,6 @@ patternProperties:
           multiplier making it possible to connect up to 15 disks to a single
           SATA port.
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
index 729def62f0c5..10f6d0a8159d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
@@ -10,7 +10,8 @@ Required properties:
     "brcm,bcm7038-gisb-arb" for 130nm chips
 - reg: specifies the base physical address and size of the registers
 - interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller
+  the parent interrupt controller. A third optional interrupt may be specified
+  for breakpoints.
 
 Optional properties:
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
index 9cc2d5f1beef..6a7b26b049f1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
@@ -26,6 +26,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     cdmm@1bde8000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/renesas,bsc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
index 7d10b62a52d5..f53a37785413 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
@@ -44,6 +44,8 @@ properties:
 required:
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
index 33326ffdb266..182134d7a6a3 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
@@ -61,6 +61,8 @@ anyOf:
   - required:
       - power-domains
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-msm8996.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
index a0c6c5d2b70f..49df13fc2f89 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -57,6 +57,11 @@ properties:
       "ranges" property should provide a "reasonable" default that is known to
       work. The software should initialize the bus controller according to it.
 
+patternProperties:
+  "^.*@[1-5],[1-9a-f][0-9a-f]+$":
+    description: Devices attached to chip selects
+    type: object
+
 required:
   - compatible
   - reg
@@ -64,6 +69,8 @@ required:
   - "#size-cells"
   - ranges
 
+additionalProperties: false
+
 examples:
   - |
     // In this example,
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
index 6d7396ab8bee..2d98f7c4d3bc 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -26,6 +26,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: true #fixme
+
 examples:
   - |+
     spi0 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index 4d382128b711..3b45344ed758 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -36,6 +36,8 @@ properties:
       - allwinner,sun9i-a80-ccu
       - allwinner,sun50i-a64-ccu
       - allwinner,sun50i-a64-r-ccu
+      - allwinner,sun50i-a100-ccu
+      - allwinner,sun50i-a100-r-ccu
       - allwinner,sun50i-h5-ccu
       - allwinner,sun50i-h6-ccu
       - allwinner,sun50i-h6-r-ccu
@@ -78,6 +80,7 @@ if:
         - allwinner,sun8i-a83t-r-ccu
         - allwinner,sun8i-h3-r-ccu
         - allwinner,sun50i-a64-r-ccu
+        - allwinner,sun50i-a100-r-ccu
         - allwinner,sun50i-h6-r-ccu
 
 then:
@@ -94,7 +97,9 @@ else:
   if:
     properties:
       compatible:
-        const: allwinner,sun50i-h6-ccu
+        enum:
+          - allwinner,sun50i-a100-ccu
+          - allwinner,sun50i-h6-ccu
 
   then:
     properties:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
index 444aeea27db8..eb241587efd1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -89,6 +89,8 @@ required:
   - compatible
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     vco1: clock {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
index 2821425ee445..bd4cefbb1244 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
@@ -134,7 +134,11 @@ properties:
   "#reset-cells":
     const: 1
 
-unevaluatedProperties: false
+  clocks: true
+
+  clock-names: true
+
+additionalProperties: false
 
 required:
   - compatible
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 97131bfa6f87..624984d51c10 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -101,7 +101,7 @@ properties:
   clock-names:
     const: ref_clk
 
-unevaluatedProperties: false
+additionalProperties: false
 
 required:
   - compatible
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/hi6220-clock.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/hi6220-clock.txt
index ef3deb7b86ea..17ac4a3dd26a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/hi6220-clock.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -4,7 +4,7 @@ Clock control registers reside in different Hi6220 system controllers,
 please refer the following document to know more about the binding rules
 for these system controllers:
 
-Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
 
 Required Properties:
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index 28c6461b9a9a..2ac1131fd922 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -50,6 +50,15 @@ properties:
   '#clock-cells':
     const: 1
 
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ xin, clkin ]
+  clocks:
+    minItems: 1
+    maxItems: 2
+
 patternProperties:
   "^OUT[1-4]$":
     type: object
@@ -93,19 +102,12 @@ allOf:
           maxItems: 1
     else:
       # Devices without builtin crystal
-      properties:
-        clock-names:
-          minItems: 1
-          maxItems: 2
-          items:
-            enum: [ xin, clkin ]
-        clocks:
-          minItems: 1
-          maxItems: 2
       required:
         - clock-names
         - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clk/versaclock.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx23-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx23-clock.yaml
index ad21899981af..5e296a00e14f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx23-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -87,6 +87,8 @@ examples:
     serial@8006c000 {
         compatible = "fsl,imx23-auart";
         reg = <0x8006c000 0x2000>;
-        interrupts = <24 25 23>;
+        interrupts = <24>;
         clocks = <&clks 32>;
+        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+        dma-names = "rx", "tx";
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx28-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx28-clock.yaml
index f1af1108129e..f831b780f951 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx28-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -108,8 +108,10 @@ examples:
     };
 
     serial@8006a000 {
-        compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+        compatible = "fsl,imx28-auart";
         reg = <0x8006a000 0x2000>;
-        interrupts = <112 70 71>;
+        interrupts = <112>;
+        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+        dma-names = "rx", "tx";
         clocks = <&clks 45>;
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx5-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index 4d9e7c73dce9..90775c2669b8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -57,7 +57,7 @@ examples:
     };
 
     can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
         reg = <0x53fc8000 0x4000>;
         interrupts = <82>;
         clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6q-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
index 92a8e545e212..4f4637eddb8b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -57,6 +57,8 @@ required:
   - interrupts
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
index c97bf95b4150..b83c8f43d664 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -33,6 +33,8 @@ required:
   - interrupts
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
index de48924be191..484894a4b23f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -49,6 +49,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
index e50cddee43c3..e6c795657c24 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -53,6 +53,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
index 36ce7667c972..6a51a3f51cd9 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -49,6 +49,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   # Clock Control Module node:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8m-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
new file mode 100644
index 000000000000..625f573a7b90
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Clock Control Module Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
+  controller, which generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-ccm
+      - fsl,imx8mn-ccm
+      - fsl,imx8mp-ccm
+      - fsl,imx8mq-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 6
+    maxItems: 7
+
+  clock-names:
+    minItems: 6
+    maxItems: 7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h
+      for the full list of i.MX8M clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-ccm
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+          items:
+            - description: 32k osc
+            - description: 25m osc
+            - description: 27m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+        clock-names:
+          minItems: 7
+          maxItems: 7
+          items:
+            - const: ckil
+            - const: osc_25m
+            - const: osc_27m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+    else:
+      properties:
+        clocks:
+          items:
+            - description: 32k osc
+            - description: 24m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+
+        clock-names:
+          items:
+            - const: osc_32k
+            - const: osc_24m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@30380000 {
+        compatible = "fsl,imx8mm-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+  - |
+    clock-controller@30390000 {
+        compatible = "fsl,imx8mq-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>,
+                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
+        clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1",
+                      "clk_ext2", "clk_ext3", "clk_ext4";
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
deleted file mode 100644
index ec830db1367b..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
+++ /dev/null
@@ -1,68 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mm-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Mini Clock Control Module Binding
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description: |
-  NXP i.MX8M Mini clock control module is an integrated clock controller, which
-  generates and supplies to all modules.
-
-properties:
-  compatible:
-    const: fsl,imx8mm-ccm
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: 32k osc
-      - description: 24m osc
-      - description: ext1 clock input
-      - description: ext2 clock input
-      - description: ext3 clock input
-      - description: ext4 clock input
-
-  clock-names:
-    items:
-      - const: osc_32k
-      - const: osc_24m
-      - const: clk_ext1
-      - const: clk_ext2
-      - const: clk_ext3
-      - const: clk_ext4
-
-  '#clock-cells':
-    const: 1
-    description:
-      The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
-      for the full list of i.MX8M Mini clock IDs.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-
-examples:
-  # Clock Control Module node:
-  - |
-    clk: clock-controller@30380000 {
-        compatible = "fsl,imx8mm-ccm";
-        reg = <0x30380000 0x10000>;
-        #clock-cells = <1>;
-        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
-                 <&clk_ext3>, <&clk_ext4>;
-        clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
-                      "clk_ext3", "clk_ext4";
-    };
-
-...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
deleted file mode 100644
index bdaa29616ab1..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mn-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Nano Clock Control Module Binding
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description: |
-  NXP i.MX8M Nano clock control module is an integrated clock controller, which
-  generates and supplies to all modules.
-
-properties:
-  compatible:
-    const: fsl,imx8mn-ccm
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: 32k osc
-      - description: 24m osc
-      - description: ext1 clock input
-      - description: ext2 clock input
-      - description: ext3 clock input
-      - description: ext4 clock input
-
-  clock-names:
-    items:
-      - const: osc_32k
-      - const: osc_24m
-      - const: clk_ext1
-      - const: clk_ext2
-      - const: clk_ext3
-      - const: clk_ext4
-
-  '#clock-cells':
-    const: 1
-    description:
-      The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
-      for the full list of i.MX8M Nano clock IDs.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-
-additionalProperties: false
-
-examples:
-  # Clock Control Module node:
-  - |
-    clk: clock-controller@30380000 {
-        compatible = "fsl,imx8mn-ccm";
-        reg = <0x30380000 0x10000>;
-        #clock-cells = <1>;
-        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
-                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
-        clock-names = "osc_32k", "osc_24m", "clk_ext1",
-                      "clk_ext2", "clk_ext3", "clk_ext4";
-    };
-
-...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
deleted file mode 100644
index 4351a1dbb4f7..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mp-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Plus Clock Control Module Binding
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description:
-  NXP i.MX8M Plus clock control module is an integrated clock controller, which
-  generates and supplies to all modules.
-
-properties:
-  compatible:
-    const: fsl,imx8mp-ccm
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: 32k osc
-      - description: 24m osc
-      - description: ext1 clock input
-      - description: ext2 clock input
-      - description: ext3 clock input
-      - description: ext4 clock input
-
-  clock-names:
-    items:
-      - const: osc_32k
-      - const: osc_24m
-      - const: clk_ext1
-      - const: clk_ext2
-      - const: clk_ext3
-      - const: clk_ext4
-
-  '#clock-cells':
-    const: 1
-    description:
-      The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
-      for the full list of i.MX8M Plus clock IDs.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-
-additionalProperties: false
-
-examples:
-  # Clock Control Module node:
-  - |
-    clk: clock-controller@30380000 {
-        compatible = "fsl,imx8mp-ccm";
-        reg = <0x30380000 0x10000>;
-        #clock-cells = <1>;
-        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
-                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
-        clock-names = "osc_32k", "osc_24m", "clk_ext1",
-                      "clk_ext2", "clk_ext3", "clk_ext4";
-    };
-
-...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
deleted file mode 100644
index 05d7d1471e0c..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
+++ /dev/null
@@ -1,72 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mq-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Quad Clock Control Module Binding
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description: |
-  NXP i.MX8M Quad clock control module is an integrated clock controller, which
-  generates and supplies to all modules.
-
-properties:
-  compatible:
-    const: fsl,imx8mq-ccm
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: 32k osc
-      - description: 25m osc
-      - description: 27m osc
-      - description: ext1 clock input
-      - description: ext2 clock input
-      - description: ext3 clock input
-      - description: ext4 clock input
-
-  clock-names:
-    items:
-      - const: ckil
-      - const: osc_25m
-      - const: osc_27m
-      - const: clk_ext1
-      - const: clk_ext2
-      - const: clk_ext3
-      - const: clk_ext4
-
-  '#clock-cells':
-    const: 1
-    description:
-      The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h
-      for the full list of i.MX8M Quad clock IDs.
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-
-examples:
-  # Clock Control Module node:
-  - |
-    clk: clock-controller@30380000 {
-        compatible = "fsl,imx8mq-ccm";
-        reg = <0x30380000 0x10000>;
-        #clock-cells = <1>;
-        clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
-                 <&clk_ext1>, <&clk_ext2>,
-                 <&clk_ext3>, <&clk_ext4>;
-        clock-names = "ckil", "osc_25m", "osc_27m",
-                      "clk_ext1", "clk_ext2",
-                      "clk_ext3", "clk_ext4";
-    };
-
-...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
index 1d5e9bcce4c8..33f3010f48c3 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -62,7 +62,7 @@ examples:
     };
 
     mmc@5b010000 {
-        compatible = "fsl,imx8qxp-usdhc";
+        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
         interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
         reg = <0x5b010000 0x10000>;
         clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
index 6dc1414bfb7f..f3e1a700a2ca 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
@@ -33,6 +33,8 @@ required:
   - reg
   - '#clock-cells'
 
+additionalProperties: false
+
 examples:
   - |
     cgu: clock-controller@e0200000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
new file mode 100644
index 000000000000..0cdf53f41f84
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM8150 and SM8250.
+
+  See also:
+    dt-bindings/clock/qcom,dispcc-sm8150.h
+    dt-bindings/clock/qcom,dispcc-sm8250.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8150-dispcc
+      - qcom,sm8250-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8250-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
index a5766ff89082..80bd6caf5bc9 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -56,6 +56,8 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
deleted file mode 100644
index 2feea2b91aa9..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ /dev/null
@@ -1,65 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-videocc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Video Clock & Reset Controller Binding for SC7180
-
-maintainers:
-  - Taniya Das <tdas@codeaurora.org>
-
-description: |
-  Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SC7180.
-
-  See also dt-bindings/clock/qcom,videocc-sc7180.h.
-
-properties:
-  compatible:
-    const: qcom,sc7180-videocc
-
-  clocks:
-    items:
-      - description: Board XO source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ab00000 {
-      compatible = "qcom,sc7180-videocc";
-      reg = <0x0ab00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>;
-      clock-names = "bi_tcxo";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
similarity index 68%
rename from Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
rename to Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index f7a0cf53d5f0..567202942b88 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -1,23 +1,31 @@
 # SPDX-License-Identifier: GPL-2.0-only
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Video Clock & Reset Controller Binding for SDM845
+title: Qualcomm Video Clock & Reset Controller Binding
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
   Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SDM845.
+  power domains on SDM845/SC7180/SM8150/SM8250.
 
-  See also dt-bindings/clock/qcom,videocc-sdm845.h.
+  See also:
+    dt-bindings/clock/qcom,videocc-sc7180.h
+    dt-bindings/clock/qcom,videocc-sdm845.h
+    dt-bindings/clock/qcom,videocc-sm8150.h
+    dt-bindings/clock/qcom,videocc-sm8250.h
 
 properties:
   compatible:
-    const: qcom,sdm845-videocc
+    enum:
+      - qcom,sc7180-videocc
+      - qcom,sdm845-videocc
+      - qcom,sm8150-videocc
+      - qcom,sm8250-videocc
 
   clocks:
     items:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index e13aee8ab61a..9b414fbde6d7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -47,6 +47,7 @@ properties:
       - renesas,r8a77980-cpg-mssr # R-Car V3H
       - renesas,r8a77990-cpg-mssr # R-Car E3
       - renesas,r8a77995-cpg-mssr # R-Car D3
+      - renesas,r8a779a0-cpg-mssr # R-Car V3U
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
deleted file mode 100644
index 349808f4fb8c..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiFive FU540 PRCI bindings
-
-On the FU540 family of SoCs, most system-wide clock and reset integration
-is via the PRCI IP block.
-
-Required properties:
-- compatible: Should be "sifive,<chip>-prci".  Only one value is
-	supported: "sifive,fu540-c000-prci"
-- reg: Should describe the PRCI's register target physical address region
-- clocks: Should point to the hfclk device tree node and the rtcclk
-          device tree node.  The RTC clock here is not a time-of-day clock,
-	  but is instead a high-stability clock source for system timers
-	  and cycle counters.
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock via the clock ID
-macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
-These macros begin with PRCI_CLK_.
-
-The hfclk and rtcclk nodes are required, and represent physical
-crystals or resonators located on the PCB.  These nodes should be present
-underneath /, rather than /soc.
-
-Examples:
-
-/* under /, in PCB-specific DT data */
-hfclk: hfclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <33333333>;
-	clock-output-names = "hfclk";
-};
-rtcclk: rtcclk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <1000000>;
-	clock-output-names = "rtcclk";
-};
-
-/* under /soc, in SoC-specific DT data */
-prci: clock-controller@10000000 {
-	compatible = "sifive,fu540-c000-prci";
-	reg = <0x0 0x10000000 0x0 0x1000>;
-	clocks = <&hfclk>, <&rtcclk>;
-	#clock-cells = <1>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
new file mode 100644
index 000000000000..c3be1b600007
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU540 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu540-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu540-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
index c6d091518650..4069e09cb62d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -73,6 +73,8 @@ else:
     The 'reg' property for the clock node is also required if there is a sub
     range of registers for the clocks.
 
+additionalProperties: false
+
 examples:
   - |
     ap_clk: clock-controller@21500000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
index 869b18ac88d7..6b419a9878f3 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -26,6 +26,8 @@ required:
   - "#clock-cells"
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     ehrpwm_tbclk: syscon@4140 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
deleted file mode 100644
index 3dd8961154ab..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Samsung micro-USB 11-pin connector
-==================================
-
-Samsung micro-USB 11-pin connector is an extension of micro-USB connector.
-It is present in multiple Samsung mobile devices.
-It has additional pins to route MHL traffic simultanously with USB.
-
-The bindings are superset of usb-connector bindings for micro-USB connector[1].
-
-Required properties:
-- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector",
-- type: must be "micro".
-
-Required nodes:
-- any data bus to the connector should be modeled using the OF graph bindings
-  specified in bindings/graph.txt, unless the bus is between parent node and
-  the connector. Since single connector can have multpile data buses every bus
-  has assigned OF graph port number as follows:
-    0: High Speed (HS),
-    3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
-
-[1]: bindings/connector/usb-connector.yaml
-
-Example
--------
-
-Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines
-connected to HDMI-MHL bridge (sii8620):
-
-muic-max77843@66 {
-	...
-	usb_con: connector {
-		compatible = "samsung,usb-connector-11pin", "usb-b-connector";
-		label = "micro-USB";
-		type = "micro";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@3 {
-				reg = <3>;
-				usb_con_mhl: endpoint {
-					remote-endpoint = <&sii8620_mhl>;
-				};
-			};
-		};
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 9bd52e63c935..728f82db073d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -11,7 +11,8 @@ maintainers:
 
 description:
   A USB connector node represents a physical USB connector. It should be a child
-  of a USB interface controller.
+  of a USB interface controller or a separate node when it is attached to both
+  MUX and USB interface controller.
 
 properties:
   compatible:
@@ -25,6 +26,10 @@ properties:
           - const: gpio-usb-b-connector
           - const: usb-b-connector
 
+      - items:
+          - const: samsung,usb-connector-11pin
+          - const: usb-b-connector
+
   label:
     description: Symbolic name for the connector.
 
@@ -158,6 +163,18 @@ allOf:
         - required:
             - id-gpios
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,usb-connector-11pin
+    then:
+      properties:
+        type:
+          const: micro
+
+additionalProperties: true
+
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
   - |
@@ -221,6 +238,33 @@ examples:
       };
     };
 
+  # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
+  # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and
+  # the output of MUX is connected to the SoC.
+  - |
+    connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+        data-role = "dual";
+
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                        reg = <0>;
+                        hs_ep: endpoint {
+                                remote-endpoint = <&usb3_hs_ep>;
+                        };
+                };
+                port@1 {
+                        reg = <1>;
+                        ss_ep: endpoint {
+                                remote-endpoint = <&hd3ss3220_in_ep>;
+                        };
+                };
+        };
+    };
+
   # USB connector with GPIO control lines
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -233,3 +277,33 @@ examples:
         vbus-supply = <&usb_p0_vbus>;
       };
     };
+
+  # Micro-USB connector with HS lines routed via controller (MUIC) and MHL
+  # lines connected to HDMI-MHL bridge (sii8620) on Samsung Exynos5433-based
+  # mobile phone
+  - |
+    muic-max77843 {
+      usb_con4: connector {
+        compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+        label = "micro-USB";
+        type = "micro";
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            muic_to_usb: endpoint {
+              remote-endpoint = <&usb_to_muic>;
+            };
+          };
+          port@3 {
+            reg = <3>;
+            usb_con_mhl: endpoint {
+              remote-endpoint = <&sii8620_mhl>;
+            };
+          };
+        };
+      };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
index 33856947c561..9299028ee712 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
@@ -8,7 +8,7 @@ Properties:
 - compatible
 	Usage:		required
 	Value type:	<string>
-	Definition:	must be "qcom,cpufreq-hw".
+	Definition:	must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
 
 - clocks
 	Usage:		required
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index fc823572bcff..0429fb774f10 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -23,7 +23,9 @@ properties:
       - items:
           - const: allwinner,sun7i-a20-crypto
           - const: allwinner,sun4i-a10-crypto
+      - const: allwinner,sun8i-a33-crypto
       - items:
+          - const: allwinner,sun8i-v3s-crypto
           - const: allwinner,sun8i-a33-crypto
 
   reg:
@@ -59,7 +61,9 @@ if:
   properties:
     compatible:
       contains:
-        const: allwinner,sun6i-a31-crypto
+        enum:
+          - allwinner,sun6i-a31-crypto
+          - allwinner,sun8i-a33-crypto
 
 then:
   required:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-dcp.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
deleted file mode 100644
index 513499fcdb5b..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 .
-
-Required properties:
-- compatible : Should be "fsl,<soc>-dcp"
-- reg : Should contain MXS DCP registers location and length
-- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
-               must be supplied, optionally Secure IRQ can be present, but
-	       is currently not implemented and not used.
-- clocks : Clock reference (only required on some SOCs: 6ull and 6sll).
-- clock-names : Must be "dcp".
-
-Example:
-
-dcp: crypto@80028000 {
-	compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
-	reg = <0x80028000 0x2000>;
-	interrupts = <52 53>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
new file mode 100644
index 000000000000..a30bf38a4a49
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-dcp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-dcp
+      - fsl,imx28-dcp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
+      must be supplied, optionally Secure IRQ can be present, but is currently
+      not implemented and not used.
+    items:
+      - description: MXS DCP VMI interrupt
+      - description: MXS DCP DCP interrupt
+      - description: MXS DCP secure interrupt
+    minItems: 2
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dcp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@80028000 {
+        compatible = "fsl,imx23-dcp";
+        reg = <0x80028000 0x2000>;
+        interrupts = <53>, <54>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
deleted file mode 100644
index db690b10e582..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Freescale SAHARA Cryptographic Accelerator included in some i.MX chips.
-Currently only i.MX27 and i.MX53 are supported.
-
-Required properties:
-- compatible : Should be "fsl,<soc>-sahara"
-- reg : Should contain SAHARA registers location and length
-- interrupts : Should contain SAHARA interrupt number
-
-Example:
-
-sah: crypto@10025000 {
-	compatible = "fsl,imx27-sahara";
-	reg = <	0x10025000 0x800>;
-	interrupts = <75>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
new file mode 100644
index 000000000000..d531f3af3ea4
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SAHARA Cryptographic Accelerator included in some i.MX chips
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx27-sahara
+      - fsl,imx53-sahara
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@10025000 {
+        compatible = "fsl,imx27-sahara";
+        reg = < 0x10025000 0x800>;
+        interrupts = <75>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt
deleted file mode 100644
index 7aad448e8a36..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Freescale Security Controller (SCC)
-
-Required properties:
-- compatible : Should be "fsl,imx25-scc".
-- reg : Should contain register location and length.
-- interrupts : Should contain interrupt numbers for SCM IRQ and SMN IRQ.
-- interrupt-names : Should specify the names "scm" and "smn" for the
-		    SCM IRQ and SMN IRQ.
-- clocks: Should contain the clock driving the SCC core.
-- clock-names: Should be set to "ipg".
-
-Example:
-
-	scc: crypto@53fac000 {
-		compatible = "fsl,imx25-scc";
-		reg = <0x53fac000 0x4000>;
-		clocks = <&clks 111>;
-		clock-names = "ipg";
-		interrupts = <49>, <50>;
-		interrupt-names = "scm", "smn";
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml
new file mode 100644
index 000000000000..563a31605d2b
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-imx-scc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Security Controller (SCC)
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+properties:
+  compatible:
+    const: fsl,imx25-scc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SCC SCM interrupt
+      - description: SCC SMN interrupt
+
+  interrupt-names:
+    items:
+      - const: scm
+      - const: smn
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@53fac000 {
+        compatible = "fsl,imx25-scc";
+        reg = <0x53fac000 0x4000>;
+        clocks = <&clks 111>;
+        clock-names = "ipg";
+        interrupts = <49>, <50>;
+        interrupt-names = "scm", "smn";
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
index 04fe5dfa794a..7743eae049ab 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
@@ -19,7 +19,7 @@ description: |+
 properties:
   compatible:
     items:
-      - const: samsung,exynos5433-slim-ss
+      - const: samsung,exynos5433-slim-sss
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index 63f948175239..7aa330dabc44 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -11,9 +11,6 @@ maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     enum:
       - allwinner,sun6i-a31-mipi-dsi
@@ -57,12 +54,7 @@ properties:
       port should be the input endpoint, usually coming from the
       associated TCON.
 
-patternProperties:
-  "^panel@[0-9]+$": true
-
 required:
-  - "#address-cells"
-  - "#size-cells"
   - compatible
   - reg
   - interrupts
@@ -74,6 +66,7 @@ required:
   - port
 
 allOf:
+  - $ref: dsi-controller.yaml#
   - if:
       properties:
         compatible:
@@ -99,7 +92,7 @@ allOf:
         clocks:
           minItems: 1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
new file mode 100644
index 000000000000..7ce06f9f9f8e
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI Controller Device Tree Bindings
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hdmi0
+      - brcm,bcm2711-hdmi1
+
+  reg:
+    items:
+      - description: HDMI controller register range
+      - description: DVP register range
+      - description: HDMI PHY register range
+      - description: Rate Manager register range
+      - description: Packet RAM register range
+      - description: Metadata RAM register range
+      - description: CSC register range
+      - description: CEC register range
+      - description: HD register range
+
+  reg-names:
+    items:
+      - const: hdmi
+      - const: dvp
+      - const: phy
+      - const: rm
+      - const: packet
+      - const: metadata
+      - const: csc
+      - const: cec
+      - const: hd
+
+  clocks:
+    items:
+      - description: The HDMI state machine clock
+      - description: The Pixel BVB clock
+      - description: The HDMI Audio parent clock
+      - description: The HDMI CEC parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: bvb
+      - const: audio
+      - const: cec
+
+  ddc:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the I2C controller used for DDC EDID probing
+
+  hpd-gpios:
+    description: >
+      The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+      as an interrupt/status bit in the HDMI controller itself)
+
+  dmas:
+    maxItems: 1
+    description: >
+      Should contain one entry pointing to the DMA channel used to
+      transfer audio data.
+
+  dma-names:
+    const: audio-rx
+
+  resets:
+    maxItems: 1
+
+  wifi-2.4ghz-coexistence:
+    type: boolean
+    description: >
+      Should the pixel frequencies in the WiFi frequencies range be
+      avoided?
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - ddc
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi0: hdmi@7ef00700 {
+        compatible = "brcm,bcm2711-hdmi0";
+        reg = <0x7ef00700 0x300>,
+              <0x7ef00300 0x200>,
+              <0x7ef00f00 0x80>,
+              <0x7ef00f80 0x80>,
+              <0x7ef01b00 0x200>,
+              <0x7ef01f00 0x400>,
+              <0x7ef00200 0x80>,
+              <0x7ef04300 0x100>,
+              <0x7ef20000 0x100>;
+        reg-names = "hdmi",
+                    "dvp",
+                    "phy",
+                    "rm",
+                    "packet",
+                    "metadata",
+                    "csc",
+                    "cec",
+                    "hd";
+        clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+        clock-names = "hdmi", "bvb", "audio", "cec";
+        resets = <&dvp 0>;
+        ddc = <&ddc0>;
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
index 3c643b227a70..eb44e072b6e5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
@@ -9,6 +9,9 @@ title: Broadcom VC4 (VideoCore4) DSI Controller
 maintainers:
   - Eric Anholt <eric@anholt.net>
 
+allOf:
+  - $ref: dsi-controller.yaml#
+
 properties:
   "#clock-cells":
     const: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
index 02410f8d6d49..e826ab0adb75 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: brcm,bcm2835-hvs
+    enum:
+      - brcm,bcm2711-hvs
+      - brcm,bcm2835-hvs
 
   reg:
     maxItems: 1
@@ -19,6 +21,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+    description: Core Clock
+
 required:
   - compatible
   - reg
@@ -26,6 +32,16 @@ required:
 
 additionalProperties: false
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: brcm,bcm2711-hvs"
+
+then:
+  required:
+    - clocks
+
 examples:
   - |
     hvs@7e400000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
index e60791db1fa1..4e1ba03f6477 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
@@ -15,6 +15,11 @@ properties:
       - brcm,bcm2835-pixelvalve0
       - brcm,bcm2835-pixelvalve1
       - brcm,bcm2835-pixelvalve2
+      - brcm,bcm2711-pixelvalve0
+      - brcm,bcm2711-pixelvalve1
+      - brcm,bcm2711-pixelvalve2
+      - brcm,bcm2711-pixelvalve3
+      - brcm,bcm2711-pixelvalve4
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
index 0dcf0c397375..49a5e041aa49 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
@@ -17,6 +17,7 @@ description: >
 properties:
   compatible:
     enum:
+      - brcm,bcm2711-vc5
       - brcm,bcm2835-vc4
       - brcm,cygnus-vc4
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
new file mode 100644
index 000000000000..74d675fc6e7b
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence MHDP8546 bridge
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,mhdp8546
+      - ti,j721e-mhdp8546
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description:
+          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+          The AUX and PMA registers are not part of this range, they are instead
+          included in the associated PHY.
+      - description:
+          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: mhdptx
+      - const: j721e-intg
+
+  clocks:
+    maxItems: 1
+    description:
+      DP bridge clock, used by the IP to know how to translate a number of
+      clock cycles into a time (which is used to comply with DP standard timings
+      and delays).
+
+  phys:
+    maxItems: 1
+    description:
+      phandle to the DisplayPort PHY.
+
+  phy-names:
+    items:
+      - const: dpphy
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    type: object
+    description:
+      Ports as described in Documentation/devicetree/bindings/graph.txt.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      port@0:
+        type: object
+        description:
+          First input port representing the DP bridge input.
+
+      port@1:
+        type: object
+        description:
+          Second input port representing the DP bridge input.
+
+      port@2:
+        type: object
+        description:
+          Third input port representing the DP bridge input.
+
+      port@3:
+        type: object
+        description:
+          Fourth input port representing the DP bridge input.
+
+      port@4:
+        type: object
+        description:
+          Output port representing the DP bridge output.
+
+    required:
+      - port@0
+      - port@4
+      - '#address-cells'
+      - '#size-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-mhdp8546
+    then:
+      properties:
+        reg:
+          minItems: 2
+        reg-names:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - phys
+  - phy-names
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhdp: dp-bridge@f0fb000000 {
+            compatible = "cdns,mhdp8546";
+            reg = <0xf0 0xfb000000 0x0 0x1000000>;
+            reg-names = "mhdptx";
+            clocks = <&mhdp_clock>;
+            phys = <&dp_phy>;
+            phy-names = "dpphy";
+            interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_bridge_input: endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+                    dp_bridge_output: endpoint {
+                        remote-endpoint = <&xxx_dp_connector_input>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index 2c500166c65d..efbb3d0117dc 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -31,6 +31,9 @@ properties:
   compatible:
     const: ite,it6505
 
+  reg:
+    maxItems: 1
+
   ovdd-supply:
     maxItems: 1
     description: I/O voltage
@@ -63,6 +66,8 @@ required:
   - reset-gpios
   - extcon
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
new file mode 100644
index 000000000000..d60208359234
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9611 2 Port MIPI to HDMI Bridge
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The LT9611 is a bridge device which converts DSI to HDMI
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9611
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vdd-supply:
+    description: Regulator for 1.8V MIPI phy power.
+
+  vcc-supply:
+    description: Regulator for 3.3V IO power.
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Primary MIPI port-1 for MIPI input
+
+        properties:
+          reg:
+            const: 0
+
+        patternProperties:
+          "^endpoint(@[0-9])$":
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint:
+                $ref: /schemas/types.yaml#/definitions/phandle
+
+        required:
+          - reg
+
+      port@1:
+        type: object
+        description: |
+          Additional MIPI port-2 for MIPI input, used in combination
+          with primary MIPI port-1 to drive higher resolution displays
+
+        properties:
+          reg:
+            const: 1
+
+        patternProperties:
+          "^endpoint(@[0-9])$":
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint:
+                $ref: /schemas/types.yaml#/definitions/phandle
+
+        required:
+          - reg
+
+      port@2:
+        type: object
+        description: |
+          HDMI port for HDMI output
+
+        properties:
+          reg:
+            const: 2
+
+        patternProperties:
+          "^endpoint(@[0-9])$":
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint:
+                $ref: /schemas/types.yaml#/definitions/phandle
+
+        required:
+          - reg
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+  - vcc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c10 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9611";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vdd-supply = <&lt9611_1v8>;
+        vcc-supply = <&lt9611_3v3>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            lt9611_a: endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            lt9611_b: endpoint {
+              remote-endpoint = <&dsi1_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            lt9611_out: endpoint {
+              remote-endpoint = <&hdmi_con>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 68951d56ebba..e5e3c72630cf 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -79,10 +79,16 @@ properties:
       The GPIO used to control the power down line of this device.
     maxItems: 1
 
+  power-supply:
+    maxItems: 1
+
 required:
   - compatible
   - ports
 
+additionalProperties: false
+
+
 examples:
   - |
     lvds-encoder {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
index 04099f5bea3f..a125b2dd3a2f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -14,6 +14,9 @@ description: |
   NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
   the SOCs NWL MIPI-DSI host controller.
 
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
 properties:
   compatible:
     const: fsl,imx8mq-nwl-dsi
@@ -30,6 +33,10 @@ properties:
   '#size-cells':
     const: 0
 
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
   clocks:
     items:
       - description: DSI core clock
@@ -140,10 +147,6 @@ properties:
 
     additionalProperties: false
 
-patternProperties:
-  "^panel@[0-9]+$":
-    type: object
-
 required:
   - '#address-cells'
   - '#size-cells'
@@ -159,7 +162,7 @@ required:
   - reset-names
   - resets
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -168,7 +171,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/reset/imx8mq-reset.h>
 
-    mipi_dsi: mipi_dsi@30a00000 {
+    dsi@30a00000 {
               #address-cells = <1>;
               #size-cells = <0>;
               compatible = "fsl,imx8mq-nwl-dsi";
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
index 819f3e31013c..3f6072651182 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -14,8 +14,10 @@ Required properties:
 - compatible : Shall contain one or more of
   - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX
   - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX
+  - "renesas,r8a774e1-hdmi" for R8A774E1 (RZ/G2H) compatible HDMI TX
   - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
   - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
+  - "renesas,r8a77961-hdmi" for R8A77961 (R-Car M3-W+) compatible HDMI TX
   - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX
   - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible
 			     HDMI TX
@@ -42,7 +44,7 @@ Optional properties:
 Example:
 
 	hdmi0: hdmi@fead0000 {
-		compatible = "renesas,r8a7795-dw-hdmi";
+		compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
 		reg = <0 0xfead0000 0 0x10000>;
 		interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
index baaf2a2a6fed..e5b163951b91 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -16,11 +16,13 @@ description: |
 properties:
   compatible:
     enum:
+      - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders
       - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders
       - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders
       - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders
       - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders
       - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders
+      - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders
       - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders
       - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders
       - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
index 012aa8e7cb8c..e42cb610f545 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -66,3 +66,5 @@ required:
   - clocks
   - ports
   - reg
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
new file mode 100644
index 000000000000..195025e6803c
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tc358762
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  vddc-supply:
+    description: Regulator for 1.2V internal core power.
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        additionalProperties: false
+
+        description: |
+          Video port for MIPI DSI input
+
+        properties:
+          reg:
+            const: 0
+
+        patternProperties:
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+        required:
+          - reg
+
+      port@1:
+        type: object
+        additionalProperties: false
+
+        description: |
+          Video port for MIPI DPI output (panel or connector).
+
+        properties:
+          reg:
+            const: 1
+
+        patternProperties:
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+        required:
+          - reg
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vddc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        reg = <0>;
+        compatible = "toshiba,tc358762";
+        vddc-supply = <&vcc_1v2_reg>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dsi_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
new file mode 100644
index 000000000000..fd3113aa9ccd
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358775 DSI to LVDS bridge bindings
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+description: |
+  This binding supports DSI to LVDS bridge TC358775
+
+  MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
+  Video frame size:
+  Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
+  limited by 135 MHz LVDS speed
+  Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
+  panel, limited by 270 MHz LVDS speed.
+
+properties:
+  compatible:
+    const: toshiba,tc358775
+
+  reg:
+    maxItems: 1
+    description: i2c address of the bridge, 0x0f
+
+  vdd-supply:
+    maxItems: 1
+    description: 1.2V LVDS Power Supply
+
+  vddio-supply:
+    maxItems: 1
+    description: 1.8V IO Power Supply
+
+  stby-gpios:
+    maxItems: 1
+    description: Standby pin, Low active
+
+  reset-gpios:
+    maxItems: 1
+    description: Hardware reset, Low active
+
+  ports:
+    type: object
+    description:
+      A node containing input and output port nodes with endpoint definitions
+      as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          DSI Input. The remote endpoint phandle should be a
+          reference to a valid mipi_dsi_host device node.
+
+      port@1:
+        type: object
+        description: |
+          Video port for LVDS output (panel or connector).
+
+      port@2:
+        type: object
+        description: |
+          Video port for Dual link LVDS output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - stby-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* For single-link LVDS display panel */
+
+    i2c@78b8000 {
+        /* On High speed expansion */
+        label = "HS-I2C2";
+        reg = <0x078b8000 0x500>;
+        clock-frequency = <400000>; /* fastmode operation */
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tc_bridge: bridge@f {
+            compatible = "toshiba,tc358775";
+            reg = <0x0f>;
+
+            vdd-supply = <&pm8916_l2>;
+            vddio-supply = <&pm8916_l6>;
+
+            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    d2l_in_test: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lvds_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+
+    dsi@1a98000 {
+        reg = <0x1a98000 0x25c>;
+        reg-names = "dsi_ctrl";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    remote-endpoint = <&d2l_in_test>;
+                    data-lanes = <0 1 2 3>;
+                };
+             };
+         };
+     };
+
+  - |
+    /* For dual-link LVDS display panel */
+
+    i2c@78b8000 {
+        /* On High speed expansion */
+        label = "HS-I2C2";
+        reg = <0x078b8000 0x500>;
+        clock-frequency = <400000>; /* fastmode operation */
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tc_bridge_dual: bridge@f {
+            compatible = "toshiba,tc358775";
+            reg = <0x0f>;
+
+            vdd-supply = <&pm8916_l2>;
+            vddio-supply = <&pm8916_l6>;
+
+            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    d2l_in_dual: endpoint {
+                        remote-endpoint = <&dsi0_out_dual>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lvds0_out: endpoint {
+                        remote-endpoint = <&panel_in0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    lvds1_out: endpoint {
+                        remote-endpoint = <&panel_in1>;
+                    };
+                };
+            };
+        };
+    };
+
+    dsi@1a98000 {
+        reg = <0x1a98000 0x25c>;
+        reg-names = "dsi_ctrl";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@1 {
+                reg = <1>;
+                dsi0_out_dual: endpoint {
+                    remote-endpoint = <&d2l_in_dual>;
+                    data-lanes = <0 1 2 3>;
+                };
+             };
+         };
+     };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/dsi-controller.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/dsi-controller.yaml
index a02039e3aca0..ca21671f6bdd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -73,6 +73,8 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
new file mode 100644
index 000000000000..f1f25aa794d9
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 NXP
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: iMX8MQ Display Controller Subsystem (DCSS)
+
+maintainers:
+  - Laurentiu Palcu <laurentiu.palcu@nxp.com>
+
+description:
+
+  The DCSS (display controller sub system) is used to source up to three
+  display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
+  2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
+  image processing capabilities are included to provide a solution capable of
+  driving next generation high dynamic range displays.
+
+properties:
+  compatible:
+    const: nxp,imx8mq-dcss
+
+  reg:
+    items:
+      - description: DCSS base address and size, up to IRQ steer start
+      - description: DCSS BLKCTL base address and size
+
+  interrupts:
+    items:
+      - description: Context loader completion and error interrupt
+      - description: DTG interrupt used to signal context loader trigger time
+      - description: DTG interrupt for Vblank
+
+  interrupt-names:
+    items:
+      - const: ctxld
+      - const: ctxld_kick
+      - const: vblank
+
+  clocks:
+    items:
+      - description: Display APB clock for all peripheral PIO access interfaces
+      - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
+      - description: RTRAM clock
+      - description: Pixel clock, can be driven either by HDMI phy clock or MIPI
+      - description: DTRC clock, needed by video decompressor
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: rtrm
+      - const: pix
+      - const: dtrc
+
+  assigned-clocks:
+    items:
+      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT
+      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM
+      - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or
+                     IMX8MQ_VIDEO_PLL1_REF_SEL
+
+  assigned-clock-parents:
+    items:
+      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+      - description: Phandle and clock specifier of IMX8MQ_CLK_27M
+
+  assigned-clock-rates:
+    items:
+      - description: Must be 800 MHz
+      - description: Must be 400 MHz
+
+  port:
+    type: object
+    description:
+      A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    dcss: display-controller@32e00000 {
+        compatible = "nxp,imx8mq-dcss";
+        reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
+        interrupts = <6>, <8>, <9>;
+        interrupt-names = "ctxld", "ctxld_kick", "vblank";
+        interrupt-parent = <&irqsteer>;
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>,
+                 <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>,
+                 <&clk IMX8MQ_CLK_DISP_DTRC>;
+        clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
+        assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>,
+                          <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>,
+                                 <&clk IMX8MQ_CLK_27M>;
+        assigned-clock-rates = <800000000>,
+                               <400000000>;
+        port {
+            dcss_out: endpoint {
+                remote-endpoint = <&hdmi_in>;
+            };
+        };
+    };
+
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709db7a4..121220745d46 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -43,7 +43,7 @@ Required properties (all function blocks):
 	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
 	"mediatek,<chip>-disp-mutex" 		- display mutex
 	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt2712 and mt8173.
+  the supported chips are mt2701, mt7623, mt2712 and mt8173.
 - reg: Physical base address and length of the function block register space
 - interrupts: The interrupt signal from the function block (required, except for
   merge and split function blocks).
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index 77def4456706..dc1ebd13cc88 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -7,7 +7,7 @@ output bus.
 
 Required properties:
 - compatible: "mediatek,<chip>-dpi"
-  the supported chips are mt2701 , mt8173 and mt8183.
+  the supported chips are mt2701, mt7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8e4729de8c85..f06f24d405a5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
 
 Required properties:
 - compatible: "mediatek,<chip>-dsi"
-  the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
 
 Required properties:
 - compatible: "mediatek,<chip>-mipi-tx"
-  the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - clocks: PLL reference clock
 - clock-output-names: name of the output clock line to the DSI encoder
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
index 7b124242b0c5..6b1c586403e4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -6,6 +6,7 @@ its parallel input.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-hdmi".
+- the supported chips are mt2701, mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
@@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-cec"
+- the supported chips are mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clock
@@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- the supported chips are mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - clocks: device clock
 - clock-names: Should be "ddc-i2c".
@@ -56,6 +59,7 @@ output and drives the HDMI pads.
 
 Required properties:
 - compatible: "mediatek,<chip>-hdmi-phy"
+- the supported chips are mt2701, mt7623 and mt8173
 - reg: Physical base address and length of the module's registers
 - clocks: PLL reference clock
 - clock-names: must contain "pll_ref"
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/msm/dsi.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/msm/dsi.txt
index 7884fd7a85c1..b9a64d3ff184 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -90,6 +90,8 @@ Required properties:
   * "qcom,dsi-phy-14nm-660"
   * "qcom,dsi-phy-10nm"
   * "qcom,dsi-phy-10nm-8998"
+  * "qcom,dsi-phy-7nm"
+  * "qcom,dsi-phy-7nm-8150"
 - reg: Physical base address and length of the registers of PLL, PHY. Some
   revisions require the PHY regulator base address, whereas others require the
   PHY lane base address. See below for each PHY revision.
@@ -98,7 +100,7 @@ Required properties:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_regulator"
-  For DSI 14nm and 10nm PHYs:
+  For DSI 14nm, 10nm and 7nm PHYs:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_lane"
@@ -116,7 +118,7 @@ Required properties:
 - vcca-supply: phandle to vcca regulator device node
   For 14nm PHY:
 - vcca-supply: phandle to vcca regulator device node
-  For 10nm PHY:
+  For 10nm and 7nm PHY:
 - vdds-supply: phandle to vdds regulator device node
 
 Optional properties:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml
index 53056dd02597..fe55611d2603 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -89,6 +89,8 @@ required:
   - iommus
   - operating-points-v2
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/msm/gpu.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/msm/gpu.txt
index 1af0ff102b50..be2875a47d43 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -144,7 +144,7 @@ Example a6xx (with GMU):
 
 		zap-shader {
 			memory-region = <&zap_shader_region>;
-			firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
+			firmware-name = "/*(DEBLOBBED)*/"
 		};
 	};
 };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
index 76a9068a85dd..b2fcec4f22fd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - bananapi,lhr050h41
+          - feixin,k101-im2byl02
       - const: ilitek,ili9881c
 
   backlight: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/lvds.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/lvds.yaml
index 946dd354256c..31164608ba1d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/lvds.yaml
@@ -112,4 +112,6 @@ oneOf:
   - required:
       - ports
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
new file mode 100644
index 000000000000..51f423297ec8
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
+
+maintainers:
+  - Guido Günther <agx@sigxcpu.org>
+
+description:
+  Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using
+  a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mantix,mlaf057we51-x
+
+  port: true
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  avdd-supply:
+    description: Positive analog power supply
+
+  avee-supply:
+    description: Negative analog power supply
+
+  vddi-supply:
+    description: 1.8V I/O voltage supply
+
+  reset-gpios: true
+
+  'mantix,tp-rstn-gpios':
+    description: second reset line that triggers DSI config load
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - vddi-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "mantix,mlaf057we51-x";
+            reg = <0>;
+            avdd-supply = <&reg_avdd>;
+            avee-supply = <&reg_avee>;
+            vddi-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/panel-common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index 45fe8fe5faba..cd6dc5461721 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -163,4 +163,6 @@ dependencies:
   width-mm: [ height-mm ]
   height-mm: [ width-mm ]
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 6deeeed59e59..edb53ab0d9eb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -29,6 +29,8 @@ properties:
     # compatible must be listed in alphabetical order, ordered by compatible.
     # The description in the comment is mandatory for each compatible.
 
+        # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel
+      - ampire,am-1280800n3tzqw-t00h
         # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
       - ampire,am-480272h3tmqw-t01h
         # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
@@ -87,6 +89,8 @@ properties:
       - cdtech,s070swv29hg-dc44
         # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
       - cdtech,s070wv95-ct16
+        # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel
+      - chefree,ch101olhlwh-002
         # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
       - chunghwa,claa070wp03xg
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
@@ -159,6 +163,8 @@ properties:
       - innolux,n156bge-l21
         # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
       - innolux,zj070na-01p
+        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+      - kingdisplay,kd116n21-30nv-a010
         # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
       - koe,tx14d24vm1bpa
         # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
@@ -219,6 +225,8 @@ properties:
       - osddisplays,osd070t1718-19ts
         # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2045-53ts
+        # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
+      - powertip,ph800480t013-idf02
         # QiaoDian XianShi Corporation 4"3 TFT LCD panel
       - qiaodian,qd43003c0-40
         # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
index d5733ef30954..09b5eb7542f8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -8,10 +8,11 @@ title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
 
 maintainers:
   - Ondrej Jirman <megi@xff.cz>
+  - Guido Gŭnther <agx@sigxcpu.org>
 
-description: |
-             Rocktech JH057N00900 is a 720x1440 TFT LCD panel
-             connected using a MIPI-DSI video interface.
+description:
+  Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+  connected using a MIPI-DSI video interface.
 
 allOf:
   - $ref: panel-common.yaml#
@@ -19,9 +20,9 @@ allOf:
 properties:
   compatible:
     enum:
-        # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+      # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
       - rocktech,jh057n00900
-        # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
+      # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
       - xingbangda,xbd599
 
   port: true
@@ -35,13 +36,9 @@ properties:
   iovcc-supply:
     description: I/O voltage supply
 
-  reset-gpios:
-    description: GPIO used for the reset pin
-    maxItems: 1
+  reset-gpios: true
 
-  backlight:
-    description: Backlight used by the panel
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+  backlight: true
 
 required:
   - compatible
@@ -57,15 +54,16 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     dsi {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      panel@0 {
-        compatible = "rocktech,jh057n00900";
-        reg = <0>;
-        vcc-supply = <&reg_2v8_p>;
-        iovcc-supply = <&reg_1v8_p>;
-        reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-        backlight = <&backlight>;
-      };
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
     };
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index 96bdde9298e0..ccc482570d6a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -12,6 +12,17 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
 properties:
   compatible:
     enum:
@@ -39,7 +50,6 @@ required:
   - vdd3-supply
   - vci-supply
   - reset-gpios
-  - enable-gpios
 
 additionalProperties: false
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
index a51660b73f28..6f1f02044b4b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -72,6 +72,8 @@ required:
   - spi-max-frequency
   - port
 
+unevaluatedProperties: false
+
 examples:
   - |+
     spi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/renesas,du.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/renesas,du.txt
index 51cd4d162770..7d65c24fcda8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/renesas,du.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -3,6 +3,7 @@
 Required Properties:
 
   - compatible: must be one of the following.
+    - "renesas,du-r8a7742" for R8A7742 (RZ/G1H) compatible DU
     - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
     - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
@@ -10,6 +11,7 @@ Required Properties:
     - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
     - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU
     - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
+    - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
     - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
     - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -18,6 +20,7 @@ Required Properties:
     - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
     - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
     - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+    - "renesas,du-r8a77961" for R8A77961 (R-Car M3-W+) compatible DU
     - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU
     - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
     - "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU
@@ -68,6 +71,7 @@ corresponding to each DU output.
 
                         Port0          Port1          Port2          Port3
 -----------------------------------------------------------------------------
+ R8A7742 (RZ/G1H)       DPAD 0         LVDS 0         LVDS 1         -
  R8A7743 (RZ/G1M)       DPAD 0         LVDS 0         -              -
  R8A7744 (RZ/G1N)       DPAD 0         LVDS 0         -              -
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
@@ -75,6 +79,7 @@ corresponding to each DU output.
  R8A774A1 (RZ/G2M)      DPAD 0         HDMI 0         LVDS 0         -
  R8A774B1 (RZ/G2N)      DPAD 0         HDMI 0         LVDS 0         -
  R8A774C0 (RZ/G2E)      DPAD 0         LVDS 0         LVDS 1         -
+ R8A774E1 (RZ/G2H)      DPAD 0         HDMI 0         LVDS 0         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
  R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
  R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
@@ -83,6 +88,7 @@ corresponding to each DU output.
  R8A7794 (R-Car E2)     DPAD 0         DPAD 1         -              -
  R8A7795 (R-Car H3)     DPAD 0         HDMI 0         HDMI 1         LVDS 0
  R8A7796 (R-Car M3-W)   DPAD 0         HDMI 0         LVDS 0         -
+ R8A77961 (R-Car M3-W+) DPAD 0         HDMI 0         LVDS 0         -
  R8A77965 (R-Car M3-N)  DPAD 0         HDMI 0         LVDS 0         -
  R8A77970 (R-Car V3M)   DPAD 0         LVDS 0         -              -
  R8A77980 (R-Car V3H)   DPAD 0         LVDS 0         -              -
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/ssd1307fb.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/ssd1307fb.txt
index 27333b9551b3..2dcb6d12d137 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/ssd1307fb.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/ssd1307fb.txt
@@ -19,6 +19,7 @@ Optional properties:
   - vbat-supply: The supply for VBAT
   - solomon,segment-no-remap: Display needs normal (non-inverted) data column
                               to segment mapping
+  - solomon,col-offset: Offset of columns (COL/SEG) that the screen is mapped to.
   - solomon,com-seq: Display uses sequential COM pin configuration
   - solomon,com-lrremap: Display uses left-right COM pin remap
   - solomon,com-invdir: Display uses inverted COM pin scan direction
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index 69cc7e8bf15a..327a14d85df8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -13,6 +13,9 @@ maintainers:
 description:
   The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
 
+allOf:
+  - $ref: dsi-controller.yaml#
+
 properties:
   compatible:
     const: st,stm32-dsi
@@ -65,24 +68,6 @@ properties:
         description:
           DSI output port node, connected to a panel or a bridge input port"
 
-patternProperties:
-  "^(panel|panel-dsi)@[0-9]$":
-    type: object
-    description:
-      A node containing the panel or bridge description as documented in
-      Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-    properties:
-      port:
-        type: object
-        description:
-          Panel or bridge port node, connected to the DSI output port (port@1)
-
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
 required:
   - "#address-cells"
   - "#size-cells"
@@ -92,7 +77,7 @@ required:
   - clock-names
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 47319214b5f6..ac63ae4a3861 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -51,8 +51,16 @@ of the following host1x client modules:
       - vi
   - Tegra210:
     - power-domains: Must include venc powergate node as vi is in VE partition.
-  - Tegra210 has CSI part of VI sharing same host interface and register space.
-    So, VI device node should have CSI child node.
+
+  ports (optional node)
+  vi can have optional ports node and max 6 ports are supported. Each port
+  should have single 'endpoint' child node. All port nodes are grouped under
+  ports node. Please refer to the bindings defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt
+
+  csi (required node)
+  Tegra210 has CSI part of VI sharing same host interface and register space.
+  So, VI device node should have CSI child node.
 
     - csi: mipi csi interface to vi
 
@@ -65,6 +73,46 @@ of the following host1x client modules:
       - power-domains: Must include sor powergate node as csicil is in
         SOR partition.
 
+      channel (optional nodes)
+      Maximum 6 channels are supported with each csi brick as either x4 or x2
+      based on hw connectivity to sensor.
+
+      Required properties:
+      - reg: csi port number. Valid port numbers are 0 through 5.
+      - nvidia,mipi-calibrate: Should contain a phandle and a specifier
+        specifying which pads are used by this CSI port and need to be
+	calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.
+
+      Each channel node must contain 2 port nodes which can be grouped
+      under 'ports' node and each port should have a single child 'endpoint'
+      node.
+
+        ports node
+        Please refer to the bindings defined in
+        Documentation/devicetree/bindings/media/video-interfaces.txt
+
+        ports node must contain below 2 port nodes.
+        port@0 with single child 'endpoint' node always a sink.
+        port@1 with single child 'endpoint' node always a source.
+
+        port@0 (required node)
+        Required properties:
+        - reg: 0
+
+	  endpoint (required node)
+	  Required properties:
+	  - data-lanes: an array of data lane from 1 to 4. Valid array
+	    lengths are 1/2/4.
+	  - remote-endpoint: phandle to sensor 'endpoint' node.
+
+        port@1 (required node)
+        Required properties:
+        - reg: 1
+
+	  endpoint (required node)
+	  Required properties:
+	  - remote-endpoint: phandle to vi port 'endpoint' node.
+
 - epp: encoder pre-processor
 
   Required properties:
@@ -340,6 +388,18 @@ Example:
 
 			ranges = <0x0 0x0 0x54080000 0x2000>;
 
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					imx219_vi_in0: endpoint {
+						remote-endpoint = <&imx219_csi_out0>;
+					};
+				};
+			};
+
 			csi@838 {
 				compatible = "nvidia,tegra210-csi";
 				reg = <0x838 0x1300>;
@@ -362,6 +422,34 @@ Example:
 					 <&tegra_car TEGRA210_CLK_CSI_TPG>;
 				clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
 				power-domains = <&pd_sor>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0>;
+					nvidia,mipi-calibrate = <&mipi 0x001>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+							imx219_csi_in0: endpoint {
+								data-lanes = <1 2>;
+								remote-endpoint = <&imx219_out0>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+							imx219_csi_out0: endpoint {
+								remote-endpoint = <&imx219_vi_in0>;
+							};
+						};
+					};
+				};
 			};
 		};
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 8b2a71395647..3e64075ac7ec 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -37,7 +37,7 @@ Optional nodes:
    supports a single port with a single endpoint.
 
  - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
-   Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting
+   Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting
    tfp410 DVI encoder or lcd panel to lcdc
 
 [1] There is an errata about AM335x color wiring. For 16-bit color mode
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index 9e53472be194..372679dbd216 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -19,9 +19,12 @@ properties:
     description: The cell is the request line number.
 
   compatible:
-    enum:
-      - allwinner,sun50i-a64-dma
-      - allwinner,sun50i-h6-dma
+    oneOf:
+      - const: allwinner,sun50i-a64-dma
+      - const: allwinner,sun50i-h6-dma
+      - items:
+          - const: allwinner,sun8i-r40-dma
+          - const: allwinner,sun50i-a64-dma
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/dma-common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/dma-common.yaml
index c36592683340..307b499e8968 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -49,3 +49,5 @@ properties:
 
 required:
   - "#dma-cells"
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml
index c39f6de76670..0043b91da95e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -17,6 +17,8 @@ properties:
   $nodename:
     pattern: "^dma-controller(@.*)?$"
 
+additionalProperties: true
+
 examples:
   - |
     dma: dma-controller@48000000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml
index 5b5f07393135..4cee5667b8a8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -36,6 +36,8 @@ required:
   - "#dma-cells"
   - dma-masters
 
+additionalProperties: true
+
 examples:
   - |
     sdma_xbar: dma-router@4a002b78 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/ingenic,dma.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
index 92794c500589..00f19b3cac31 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -62,6 +62,8 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/jz4780-cgu.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
index 13f1a46be40d..b548e4723936 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,dmac-r8a7742  # RZ/G1H
           - renesas,dmac-r8a7743  # RZ/G1M
           - renesas,dmac-r8a7744  # RZ/G1N
           - renesas,dmac-r8a7745  # RZ/G1E
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index 20870f5c14dd..ef1d6879c158 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -18,12 +18,15 @@ properties:
     const: snps,dma-spear1340
 
   "#dma-cells":
-    const: 3
+    minimum: 3
+    maximum: 4
     description: |
       First cell is a phandle pointing to the DMA controller. Second one is
       the DMA request line number. Third cell is the memory master identifier
       for transfers on dynamically allocated channel. Fourth cell is the
-      peripheral master identifier for transfers on an allocated channel.
+      peripheral master identifier for transfers on an allocated channel. Fifth
+      cell is an optional mask of the DMA channels permitted to be allocated
+      for the corresponding client device.
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 71987878e4ae..2a5325f480f6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -81,6 +81,8 @@ required:
   - clocks
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index 915bc4af9568..c8d2b51d8410 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -33,6 +33,8 @@ required:
   - reg
   - dma-masters
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
index c66543d0c267..c30be840be1c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -84,6 +84,8 @@ required:
   - clocks
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index dd70ddab4fd1..9a87fd9041eb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -141,6 +141,8 @@ then:
   required:
     - ti,udma-atype
 
+unevaluatedProperties: false
+
 examples:
   - |+
     cbass_main {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
new file mode 100644
index 000000000000..57e5270a0741
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/amazon,al-mc-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Memory Controller EDAC
+
+maintainers:
+  - Talel Shenhar <talel@amazon.com>
+  - Talel Shenhar <talelshenhar@gmail.com>
+
+description: |
+  EDAC node is defined to describe on-chip error detection and correction for
+  Amazon's Annapurna Labs Memory Controller.
+
+properties:
+
+  compatible:
+    const: amazon,al-mc-edac
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: uncorrectable error interrupt
+      - description: correctable error interrupt
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: ue
+      - const: ce
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        edac@f0080000 {
+          #address-cells = <2>;
+          #size-cells = <2>;
+          compatible = "amazon,al-mc-edac";
+          reg = <0x0 0xf0080000 0x0 0x00010000>;
+          interrupt-parent = <&amazon_al_system_fabric>;
+          interrupt-names = "ue";
+          interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/edac/dmc-520.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/edac/dmc-520.yaml
index 9272d2bd8634..3b6842e92d1b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/edac/dmc-520.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/edac/dmc-520.yaml
@@ -49,6 +49,8 @@ required:
   - interrupts
   - interrupt-names
 
+additionalProperties: false
+
 examples:
   - |
     dmc0: dmc@200000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
index 4cee72d53318..6edfa705b486 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -114,6 +114,9 @@ properties:
           - const: renesas,r1ex24128
           - const: atmel,24c128
 
+  label:
+    description: Descriptive name of the EEPROM.
+
   reg:
     maxItems: 1
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/eeprom/at25.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/eeprom/at25.txt
deleted file mode 100644
index fcacd97abd0a..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/eeprom/at25.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-EEPROMs (SPI) compatible with Atmel at25.
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
-  Example "<vendor>,<type>" values:
-    "anvo,anv32e61w"
-    "microchip,25lc040"
-    "st,m95m02"
-    "st,m95256"
-
-- reg : chip select number
-- spi-max-frequency : max spi frequency to use
-- pagesize : size of the eeprom page
-- size : total eeprom size in bytes
-- address-width : number of address bits (one of 8, 9, 16, or 24).
-  For 9 bits, the MSB of the address is sent as bit 3 of the instruction
-  byte, before the address byte.
-
-Optional properties:
-- spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
-- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
-- read-only : this parameter-less property disables writes to the eeprom
-- wp-gpios : GPIO to which the write-protect pin of the chip is connected
-
-Obsolete legacy properties can be used in place of "size", "pagesize",
-"address-width", and "read-only":
-- at25,byte-len : total eeprom size in bytes
-- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
-- at25,page-size : size of the eeprom page
-
-Additional compatible properties are also allowed.
-
-Example:
-	eeprom@0 {
-		compatible = "st,m95256", "atmel,at25";
-		reg = <0>
-		spi-max-frequency = <5000000>;
-		spi-cpha;
-		spi-cpol;
-		wp-gpios = <&gpio1 3 0>;
-
-		pagesize = <64>;
-		size = <32768>;
-		address-width = <16>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/eeprom/at25.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/eeprom/at25.yaml
new file mode 100644
index 000000000000..744973637678
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/eeprom/at25.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: SPI EEPROMs compatible with Atmel's AT25
+
+maintainers:
+  - Christian Eggers <ceggers@arri.de>
+
+properties:
+  $nodename:
+    pattern: "^eeprom@[0-9a-f]{1,2}$"
+
+  # There are multiple known vendors who manufacture EEPROM chips compatible
+  # with Atmel's AT25. The compatible string requires two items where the
+  # 'vendor' and 'model' parts of the first are the actual chip and the second
+  # item is fixed to "atmel,at25". Some existing bindings only have the
+  # "atmel,at25" part and should be fixed by somebody who knows vendor and
+  # product.
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - anvo,anv32e61w
+              - atmel,at25256B
+              - fujitsu,mb85rs1mt
+              - fujitsu,mb85rs64
+              - microchip,at25160bn
+              - microchip,25lc040
+              - st,m95m02
+              - st,m95256
+
+          - const: atmel,at25
+
+      # Please don't use this alternative for new bindings.
+      - items:
+          - const: atmel,at25
+
+  reg:
+    description:
+      Chip select number.
+
+  spi-max-frequency: true
+
+  pagesize:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
+    description:
+      Size of the eeprom page.
+
+  size:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+      Total eeprom size in bytes.
+
+  address-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 9, 16, 24 ]
+    description:
+      Number of address bits.
+      For 9 bits, the MSB of the address is sent as bit 3 of the instruction
+      byte, before the address byte.
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  read-only:
+    description:
+      Disable writes to the eeprom.
+    type: boolean
+
+  wp-gpios:
+    maxItems: 1
+    description:
+      GPIO to which the write-protect pin of the chip is connected.
+
+  # Deprecated: at25,byte-len, at25,addr-mode, at25,page-size
+  at25,byte-len:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total eeprom size in bytes. Deprecated, use "size" property instead.
+    deprecated: true
+
+  at25,addr-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Addr-mode flags, as defined in include/linux/spi/eeprom.h.
+      Deprecated, use "address-width" property instead.
+    deprecated: true
+
+  at25,page-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the eeprom page. Deprecated, use "pagesize" property instead.
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - pagesize
+  - size
+  - address-width
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@0 {
+            compatible = "st,m95256", "atmel,at25";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            spi-cpol;
+            wp-gpios = <&gpio1 3 0>;
+
+            pagesize = <64>;
+            size = <32768>;
+            address-width = <16>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/example-schema.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/example-schema.yaml
index 822975dbeafa..a97f39109f8d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/example-schema.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/example-schema.yaml
@@ -81,6 +81,8 @@ properties:
     maxItems: 1
     description: bus clock. A description is only needed for a single item if
       there's something unique to add.
+      The items should have a fixed order, so pattern matching names are
+      discouraged.
 
   clock-names:
     items:
@@ -97,6 +99,8 @@ properties:
       A variable number of interrupts warrants a description of what conditions
       affect the number of interrupts. Otherwise, descriptions on standard
       properties are not necessary.
+      The items should have a fixed order, so pattern matching names are
+      discouraged.
 
   interrupt-names:
     # minItems must be specified here because the default would be 2
@@ -196,14 +200,24 @@ required:
 #
 # If the conditionals become too unweldy, then it may be better to just split
 # the binding into separate schema documents.
-if:
-  properties:
-    compatible:
-      contains:
-        const: vendor,soc2-ip
-then:
-  required:
-    - foo-supply
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: vendor,soc2-ip
+    then:
+      required:
+        - foo-supply
+  # Altering schema depending on presence of properties is usually done by
+  # dependencies (see above), however some adjustments might require if:
+  - if:
+      required:
+        - vendor,bool-property
+    then:
+      properties:
+        vendor,int-property:
+          enum: [2, 4, 6]
 
 # Ideally, the schema should have this line otherwise any other properties
 # present are allowed. There's a few common properties such as 'status' and
@@ -211,6 +225,9 @@ then:
 #
 # This can't be used in cases where another schema is referenced
 # (i.e. allOf: [{$ref: ...}]).
+# If and only if another schema is referenced and arbitrary children nodes can
+# appear, "unevaluatedProperties: false" could be used.  A typical example is
+# an I2C controller where no name pattern matching for children can be added.
 additionalProperties: false
 
 examples:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
deleted file mode 100644
index 936fbdf12815..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* PTN5150 CC (Configuration Channel) Logic device
-
-PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
-connector application with CC control logic detection and indication functions.
-It is interfaced to the host controller using an I2C interface.
-
-Required properties:
-- compatible: should be "nxp,ptn5150"
-- reg: specifies the I2C slave address of the device
-- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin
-	connected to the PTN5150's INTB pin.
-- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which
-	is used to control VBUS.
-- pinctrl-names : a pinctrl state named "default" must be defined.
-- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus
-	control.
-
-Example:
-	ptn5150@1d {
-		compatible = "nxp,ptn5150";
-		reg = <0x1d>;
-		int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
-		vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ptn5150_default>;
-		status = "okay";
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
new file mode 100644
index 000000000000..4b0f414486d2
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PTN5150 CC (Configuration Channel) Logic device
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+  connector application with CC control logic detection and indication
+  functions.  It is interfaced to the host controller using an I2C interface.
+
+properties:
+  compatible:
+    const: nxp,ptn5150
+
+  int-gpios:
+    deprecated: true
+    description:
+      GPIO pin (input) connected to the PTN5150's INTB pin.
+      Use "interrupts" instead.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vbus-gpios:
+    description:
+      GPIO pin (output) used to control VBUS. If skipped, no such control
+      takes place.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ptn5150@1d {
+            compatible = "nxp,ptn5150";
+            reg = <0x1d>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+            vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
index f9845dc2f5ae..5fe784f487c5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -123,3 +123,5 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 0
     maximum: 3
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
index b758f91914f7..9853fefff5d8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
@@ -12,6 +12,13 @@ Required properties:
  - pinctrl-0: phandle to pinctrl node
  - pinctrl-names: pinctrl state
 
+Optional properties:
+ - cfam-reset-gpios: GPIO for CFAM reset
+
+ - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
+ - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
+
+
 Examples:
 
     fsi-master {
@@ -21,4 +28,9 @@ Examples:
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fsi1_default>;
 	clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
index b26d4b4be743..e425278653f5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - ibm,fsi2spi
+      - ibm,fsi2spi-restricted
 
   reg:
     items:
@@ -28,6 +29,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     fsi2spi@1c00 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
index 2aaf661c04ee..b109911669e4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
@@ -7,6 +7,7 @@ Required properties:
   For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
   For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
   "nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
+  For Tegra234 must contain "nvidia,tegra234-efuse".
   Details:
   nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
 	due to a hardware bug. Tegra20 also lacks certain information which is
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
index 0b223abe8cfb..f57d22d1ebd6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -11,12 +11,33 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx1-gpio
-      - fsl,imx21-gpio
-      - fsl,imx31-gpio
-      - fsl,imx35-gpio
-      - fsl,imx7d-gpio
+    oneOf:
+      - enum:
+          - fsl,imx1-gpio
+          - fsl,imx21-gpio
+          - fsl,imx31-gpio
+          - fsl,imx35-gpio
+          - fsl,imx7d-gpio
+      - items:
+          - const: fsl,imx35-gpio
+          - const: fsl,imx31-gpio
+      - items:
+          - enum:
+              - fsl,imx50-gpio
+              - fsl,imx51-gpio
+              - fsl,imx53-gpio
+              - fsl,imx6q-gpio
+              - fsl,imx6sl-gpio
+              - fsl,imx6sll-gpio
+              - fsl,imx6sx-gpio
+              - fsl,imx6ul-gpio
+              - fsl,imx7d-gpio
+              - fsl,imx8mm-gpio
+              - fsl,imx8mn-gpio
+              - fsl,imx8mp-gpio
+              - fsl,imx8mq-gpio
+              - fsl,imx8qxp-gpio
+          - const: fsl,imx35-gpio
 
   reg:
     maxItems: 1
@@ -41,6 +62,28 @@ properties:
     const: 2
 
   gpio-controller: true
+  gpio-line-names: true
+  gpio-ranges: true
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
 
 required:
   - compatible
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-max732x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
deleted file mode 100644
index b3a9c0c32823..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* MAX732x-compatible I/O expanders
-
-Required properties:
-  - compatible: Should be one of the following:
-    - "maxim,max7319": For the Maxim MAX7319
-    - "maxim,max7320": For the Maxim MAX7320
-    - "maxim,max7321": For the Maxim MAX7321
-    - "maxim,max7322": For the Maxim MAX7322
-    - "maxim,max7323": For the Maxim MAX7323
-    - "maxim,max7324": For the Maxim MAX7324
-    - "maxim,max7325": For the Maxim MAX7325
-    - "maxim,max7326": For the Maxim MAX7326
-    - "maxim,max7327": For the Maxim MAX7327
-  - reg: I2C slave address for this device.
-  - gpio-controller: Marks the device node as a GPIO controller.
-  - #gpio-cells: Should be 2.
-    - first cell is the GPIO number
-    - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
-      Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-Optional properties:
-
-  The I/O expander can detect input state changes, and thus optionally act as
-  an interrupt controller. When the expander interrupt line is connected all the
-  following properties must be set. For more information please see the
-  interrupt controller device tree bindings documentation available at
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
-    - first cell is the pin number
-    - second cell is used to specify flags
-  - interrupts: Interrupt specifier for the controllers interrupt.
-
-Please refer to gpio.txt in this directory for details of the common GPIO
-bindings used by client devices.
-
-Example 1. MAX7325 with interrupt support enabled (CONFIG_GPIO_MAX732X_IRQ=y):
-
-	expander: max7325@6d {
-		compatible = "maxim,max7325";
-		reg = <0x6d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-Example 2. MAX7325 with interrupt support disabled (CONFIG_GPIO_MAX732X_IRQ=n):
-
-	expander: max7325@6d {
-		compatible = "maxim,max7325";
-		reg = <0x6d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
deleted file mode 100644
index 3126c3817e2a..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* NXP PCA953x I2C GPIO multiplexer
-
-Required properties:
- - compatible: Has to contain one of the following:
-	nxp,pca6416
-	nxp,pca9505
-	nxp,pca9534
-	nxp,pca9535
-	nxp,pca9536
-	nxp,pca9537
-	nxp,pca9538
-	nxp,pca9539
-	nxp,pca9554
-	nxp,pca9555
-	nxp,pca9556
-	nxp,pca9557
-	nxp,pca9574
-	nxp,pca9575
-	nxp,pca9698
-	nxp,pcal6416
-	nxp,pcal6524
-	nxp,pcal9535
-	nxp,pcal9555a
-	maxim,max7310
-	maxim,max7312
-	maxim,max7313
-	maxim,max7315
-	ti,pca6107
-	ti,pca9536
-	ti,tca6408
-	ti,tca6416
-	ti,tca6424
-	ti,tca9539
-	ti,tca9554
-	onnn,cat9554
-	onnn,pca9654
-	exar,xra1202
- - gpio-controller: if used as gpio expander.
- - #gpio-cells: if used as gpio expander.
- - interrupt-controller: if to be used as interrupt expander.
- - #interrupt-cells: if to be used as interrupt expander.
-
-Optional properties:
- - interrupts: interrupt specifier for the device's interrupt output.
- - reset-gpios: GPIO specification for the RESET input. This is an
-		active low signal to the PCA953x.
- - vcc-supply:	power supply regulator.
-
-Example:
-
-
-	gpio@20 {
-		compatible = "nxp,pca9505";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9505>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-
-Example with Interrupts:
-
-
-	gpio99: gpio@22 {
-		compatible = "nxp,pcal6524";
-		reg = <0x22>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;	/* gpio6_161 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		vcc-supply = <&vdds_1v8_main>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-			"hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", "vibra", "fault2", "p06", "p07",
-			"en-usb", "en-host1", "en-host2", "chg-int", "p14", "p15", "mic-int", "en-modem",
-			"shdn-hs-amp", "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27";
-	};
-
-	ts3a227@3b {
-		compatible = "ti,ts3a227e";
-		reg = <0x3b>;
-		interrupt-parent = <&gpio99>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;
-		ti,micbias = <0>;	/* 2.1V */
-	};
-
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
new file mode 100644
index 000000000000..183ec23eda39
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA95xx I2C GPIO multiplexer
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  Bindings for the family of I2C GPIO multiplexers/expanders: NXP PCA95xx,
+  Maxim MAX73xx
+
+properties:
+  compatible:
+    enum:
+      - exar,xra1202
+      - maxim,max7310
+      - maxim,max7312
+      - maxim,max7313
+      - maxim,max7315
+      - maxim,max7319
+      - maxim,max7320
+      - maxim,max7321
+      - maxim,max7322
+      - maxim,max7323
+      - maxim,max7324
+      - maxim,max7325
+      - maxim,max7326
+      - maxim,max7327
+      - nxp,pca6416
+      - nxp,pca9505
+      - nxp,pca9534
+      - nxp,pca9535
+      - nxp,pca9536
+      - nxp,pca9537
+      - nxp,pca9538
+      - nxp,pca9539
+      - nxp,pca9554
+      - nxp,pca9555
+      - nxp,pca9556
+      - nxp,pca9557
+      - nxp,pca9574
+      - nxp,pca9575
+      - nxp,pca9698
+      - nxp,pcal6416
+      - nxp,pcal6524
+      - nxp,pcal9535
+      - nxp,pcal9555a
+      - onnn,cat9554
+      - onnn,pca9654
+      - ti,pca6107
+      - ti,pca9536
+      - ti,tca6408
+      - ti,tca6416
+      - ti,tca6424
+      - ti,tca9539
+      - ti,tca9554
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  reset-gpios:
+    description:
+      GPIO specification for the RESET input. This is an active low signal to
+      the PCA953x.  Not valid for Maxim MAX732x devices.
+
+  vcc-supply:
+    description:
+      Optional power supply.  Not valid for Maxim MAX732x devices.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+    then:
+      properties:
+        reset-gpios: false
+        vcc-supply: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@20 {
+            compatible = "nxp,pca9505";
+            reg = <0x20>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_pca9505>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+            usb3-sata-sel-hog {
+                gpio-hog;
+                gpios = <4 GPIO_ACTIVE_HIGH>;
+                output-low;
+                line-name = "usb3_sata_sel";
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio99: gpio@22 {
+            compatible = "nxp,pcal6524";
+            reg = <0x22>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            vcc-supply = <&vdds_1v8_main>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03",
+                              "vibra", "fault2", "p06", "p07", "en-usb",
+                              "en-host1", "en-host2", "chg-int", "p14", "p15",
+                              "mic-int", "en-modem", "shdn-hs-amp",
+                              "chg-status+red", "green", "blue", "en-esata",
+                              "fault1", "p26", "p27";
+        };
+
+        ts3a227@3b {
+            compatible = "ti,ts3a227e";
+            reg = <0x3b>;
+            interrupt-parent = <&gpio99>;
+            interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+            ti,micbias = <0>; /* 2.1V */
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support enabled */
+        gpio@6d {
+            compatible = "maxim,max7325";
+            reg = <0x6d>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+  - |
+    i2c3 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support disabled */
+        gpio@6e {
+            compatible = "maxim,max7325";
+            reg = <0x6e>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
deleted file mode 100644
index ae254aadee35..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Freescale VF610 PORT/GPIO module
-
-The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
-functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
-each, and each PORT module has its own interrupt.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio", below is supported list:
-	       "fsl,vf610-gpio"
-	       "fsl,imx7ulp-gpio"
-- reg : The first reg tuple represents the PORT module, the second tuple
-  the GPIO module.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Optional properties:
--clocks:	Must contain an entry for each entry in clock-names.
-		See common clock-bindings.txt for details.
--clock-names:	A list of clock names. For imx7ulp, it must contain
-		"gpio", "port".
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
-	gpio0 = &gpio1;
-	gpio1 = &gpio2;
-};
-
-gpio1: gpio@40049000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x40049000 0x1000 0x400ff000 0x40>;
-	interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 0 32>;
-};
-
-gpio2: gpio@4004a000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-	interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 32 32>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
new file mode 100644
index 000000000000..19738a457a58
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-vf610.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale VF610 PORT/GPIO module
+
+maintainers:
+  - Stefan Agner <stefan@agner.ch>
+
+description: |
+  The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
+  functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
+  each, and each PORT module has its own interrupt.
+
+  Note: Each GPIO port should have an alias correctly numbered in "aliases"
+  node.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,vf610-gpio
+      - items:
+          - const: fsl,imx7ulp-gpio
+          - const: fsl,vf610-gpio
+
+  reg:
+    description: The first reg tuple represents the PORT module, the second tuple
+      represents the GPIO module.
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  clocks:
+    items:
+      - description: SoC GPIO clock
+      - description: SoC PORT clock
+
+  clock-names:
+    items:
+      - const: gpio
+      - const: port
+
+  gpio-ranges:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio1: gpio@40049000 {
+        compatible = "fsl,vf610-gpio";
+        reg = <0x40049000 0x1000>, <0x400ff000 0x40>;
+        interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&iomuxc 0 0 32>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
new file mode 100644
index 000000000000..b032471831e7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  There are three flavors of the GPIO controller, one full featured
+  input/output with interrupt support (kontron,sl28cpld-gpio), one
+  output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
+
+  Each controller supports 8 GPIO lines.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-gpio
+      - kontron,sl28cpld-gpi
+      - kontron,sl28cpld-gpo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
index 313b17229247..bd35cbf7fa09 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
@@ -51,7 +51,10 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names: true
+
   gpio-ranges:
+    minItems: 1
     maxItems: 8
 
 required:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index 3ad229307bd5..5026662e4508 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -37,6 +37,7 @@ properties:
               - renesas,gpio-r8a774a1     # RZ/G2M
               - renesas,gpio-r8a774b1     # RZ/G2N
               - renesas,gpio-r8a774c0     # RZ/G2E
+              - renesas,gpio-r8a774e1     # RZ/G2H
               - renesas,gpio-r8a7795      # R-Car H3
               - renesas,gpio-r8a7796      # R-Car M3-W
               - renesas,gpio-r8a77961     # R-Car M3-W+
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
index 1240f6289249..b391cc1b4590 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -61,8 +61,14 @@ patternProperties:
       '#gpio-cells':
         const: 2
 
+      ngpios:
+        default: 32
+        minimum: 1
+        maximum: 32
+
       snps,nr-gpios:
         description: The number of GPIO pins exported by the port.
+        deprecated: true
         $ref: /schemas/types.yaml#/definitions/uint32
         default: 32
         minimum: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
index c58ff9a94f45..1a54db04f29d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -64,6 +64,8 @@ required:
   - gpio-ranges
   - socionext,interrupt-ranges
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 80d519a76db2..e9c42b59f30f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -74,6 +74,7 @@ properties:
       - const: bus
 
   mali-supply: true
+  opp-table: true
 
   power-domains:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index 6226d31ec4b7..eceaa176bd57 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -8,7 +8,7 @@ title: ARM Mali Utgard GPU
 
 maintainers:
   - Rob Herring <robh@kernel.org>
-  - Maxime Ripard <maxime.ripard@free-electrons.com>
+  - Maxime Ripard <mripard@kernel.org>
   - Heiko Stuebner <heiko@sntech.de>
 
 properties:
@@ -25,6 +25,7 @@ properties:
               - allwinner,sun4i-a10-mali
               - allwinner,sun7i-a20-mali
               - allwinner,sun8i-h3-mali
+              - allwinner,sun8i-r40-mali
               - allwinner,sun50i-a64-mali
               - rockchip,rk3036-mali
               - rockchip,rk3066-mali
@@ -100,6 +101,8 @@ properties:
 
   mali-supply: true
 
+  opp-table: true
+
   power-domains:
     maxItems: 1
 
@@ -129,6 +132,7 @@ allOf:
             enum:
               - allwinner,sun4i-a10-mali
               - allwinner,sun7i-a20-mali
+              - allwinner,sun8i-r40-mali
               - allwinner,sun50i-a64-mali
               - allwinner,sun50i-h5-mali
               - amlogic,meson8-mali
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index 665c6e3b31d3..62486f55177d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -22,6 +22,12 @@ properties:
   interrupts:
     maxItems: 1
 
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
   clocks:
     maxItems: 1
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/vivante,gc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
index 4843df1ddbb6..3ed172629974 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -21,12 +21,19 @@ properties:
   interrupts:
     maxItems: 1
 
+  '#cooling-cells':
+    const: 2
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
   clocks:
     items:
       - description: AXI/master interface clock
       - description: GPU core clock
       - description: Shader clock (only required if GPU has feature PIPE_3D)
-      - description: AHB/slave interface clock (only required if GPU can gate 
+      - description: AHB/slave interface clock (only required if GPU can gate
           slave interface independently)
     minItems: 1
     maxItems: 4
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
deleted file mode 100644
index 8d365f89694c..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-TI HwSpinlock for OMAP and K3 based SoCs
-=========================================
-
-Required properties:
-- compatible:		Should be one of the following,
-			  "ti,omap4-hwspinlock" for
-				OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
-			  "ti,am654-hwspinlock" for
-				K3 AM65x and J721E SoCs
-- reg:			Contains the hwspinlock module register address space
-			(base address and length)
-- ti,hwmods:		Name of the hwmod associated with the hwspinlock device
-			(for OMAP architecture based SoCs only)
-- #hwlock-cells:	Should be 1. The OMAP hwspinlock users will use a
-			0-indexed relative hwlock number as the argument
-			specifier value for requesting a specific hwspinlock
-			within a hwspinlock bank.
-
-Please look at the generic hwlock binding for usage information for consumers,
-"Documentation/devicetree/bindings/hwlock/hwlock.txt"
-
-Example:
-
-1. OMAP4 SoCs
-hwspinlock: spinlock@4a0f6000 {
-	compatible = "ti,omap4-hwspinlock";
-	reg = <0x4a0f6000 0x1000>;
-	ti,hwmods = "spinlock";
-	#hwlock-cells = <1>;
-};
-
-2. AM65x SoCs and J721E SoCs
-&cbass_main {
-	cbass_main_navss: interconnect0 {
-		hwspinlock: spinlock@30e00000 {
-			compatible = "ti,am654-hwspinlock";
-			reg = <0x00 0x30e00000 0x00 0x1000>;
-			#hwlock-cells = <1>;
-		};
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
new file mode 100644
index 000000000000..ac35491a6f65
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI HwSpinlock for OMAP and K3 based SoCs
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap4-hwspinlock  # for OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
+      - ti,am654-hwspinlock  # for K3 AM65x, J721E and J7200 SoCs
+
+  reg:
+    maxItems: 1
+
+  "#hwlock-cells":
+    const: 1
+    description: |
+      The OMAP hwspinlock users will use a 0-indexed relative hwlock number as
+      the argument specifier value for requesting a specific hwspinlock within
+      a hwspinlock bank.
+
+      Please look at the generic hwlock binding for usage information for
+      consumers, "Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+required:
+  - compatible
+  - reg
+  - "#hwlock-cells"
+
+additionalProperties: false
+
+examples:
+
+  - |
+    /* OMAP4 SoCs */
+    hwspinlock: spinlock@4a0f6000 {
+        compatible = "ti,omap4-hwspinlock";
+        reg = <0x4a0f6000 0x1000>;
+        #hwlock-cells = <1>;
+    };
+
+  - |
+    / {
+        /* K3 AM65x SoCs */
+        model = "Texas Instruments K3 AM654 SoC";
+        compatible = "ti,am654-evm", "ti,am654";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        bus@100000 {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+                     <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>; /* Main NavSS */
+
+            bus@30800000 {
+                compatible = "simple-mfd";
+                #address-cells = <2>;
+                #size-cells = <2>;
+                ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>;
+
+                spinlock@30e00000 {
+                    compatible = "ti,am654-hwspinlock";
+                    reg = <0x00 0x30e00000 0x00 0x1000>;
+                    #hwlock-cells = <1>;
+                };
+            };
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
new file mode 100644
index 000000000000..43b4f4f57b49
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1266
+
+  reg:
+    description: |
+      I2C address of slave device.
+    items:
+      minimum: 0x40
+      maximum: 0x4F
+
+  avcc-supply:
+    description: |
+      Phandle to the Avcc power supply.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adm1266@40 {
+                compatible = "adi,adm1266";
+                reg = <0x40>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index 7898b9dba5a5..6747b870f297 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -44,6 +44,8 @@ required:
   - interrupts
   - pulses-per-revolution
 
+additionalProperties: false
+
 examples:
   - |
     fpga_axi: fpga-axi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/adt7475.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index dfa821c0aacc..ad0ec9f35bd8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -65,6 +65,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
index 84ae4cdd08ed..00a6511354e6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
@@ -79,7 +79,7 @@ properties:
       minimum: 0
       maximum: 7130
 
-unevaluatedProperties: false
+additionalProperties: false
 
 required:
   - compatible
@@ -99,7 +99,7 @@ examples:
 
       interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
 
-      baikal,pvt-temp-trim-millicelsius = <1000>;
+      baikal,pvt-temp-offset-millicelsius = <1000>;
 
       clocks = <&ccu_sys>, <&ccu_sys>;
       clock-names = "ref", "pclk";
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
new file mode 100644
index 000000000000..010333cb25c0
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware monitoring driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-fan
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/lm75.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/lm75.txt
deleted file mode 100644
index 273616702c51..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/lm75.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-*LM75 hwmon sensor.
-
-Required properties:
-- compatible: manufacturer and chip name, one of
-		"adi,adt75",
-		"dallas,ds1775",
-		"dallas,ds75",
-		"dallas,ds7505",
-		"gmt,g751",
-		"national,lm75",
-		"national,lm75a",
-		"national,lm75b",
-		"maxim,max6625",
-		"maxim,max6626",
-		"maxim,max31725",
-		"maxim,max31726",
-		"maxim,mcp980x",
-		"nxp,pct2075",
-		"st,stds75",
-		"st,stlm75",
-		"microchip,tcn75",
-		"ti,tmp100",
-		"ti,tmp101",
-		"ti,tmp105",
-		"ti,tmp112",
-		"ti,tmp175",
-		"ti,tmp275",
-		"ti,tmp75",
-		"ti,tmp75b",
-		"ti,tmp75c",
-
-- reg: I2C bus address of the device
-
-Example:
-
-sensor@48 {
-	compatible = "st,stlm75";
-	reg = <0x48>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
new file mode 100644
index 000000000000..96eed5cc7841
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM75 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    enum:
+      - adi,adt75
+      - dallas,ds1775
+      - dallas,ds75
+      - dallas,ds7505
+      - gmt,g751
+      - national,lm75
+      - national,lm75a
+      - national,lm75b
+      - maxim,max6625
+      - maxim,max6626
+      - maxim,max31725
+      - maxim,max31726
+      - maxim,mcp980x
+      - nxp,pct2075
+      - st,stds75
+      - st,stlm75
+      - microchip,tcn75
+      - ti,tmp100
+      - ti,tmp101
+      - ti,tmp105
+      - ti,tmp112
+      - ti,tmp175
+      - ti,tmp275
+      - ti,tmp75
+      - ti,tmp75b
+      - ti,tmp75c
+
+  reg:
+    maxItems: 1
+
+  vs-supply:
+    description: phandle to the regulator that provides the +VS supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@48 {
+        compatible = "st,stlm75";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+      };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
new file mode 100644
index 000000000000..93e86e3b4602
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max20730.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max20730
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  The MAX20730 is a fully integrated, highly efficient switching regulator
+  with PMBus for applications operating from 4.5V to 16V and requiring
+  up to 25A (max) load. This single-chip regulator provides extremely
+  compact, high efficiency power-delivery solutions with high-precision
+  output voltages and excellent transient response.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max20730
+      - maxim,max20734
+      - maxim,max20743
+
+  reg:
+    maxItems: 1
+
+  vout-voltage-divider:
+    description: |
+      If voltage divider present at vout, the voltage at voltage sensor pin
+      will be scaled. The properties will convert the raw reading to a more
+      meaningful number if voltage divider present. It has two numbers,
+      the first number is the output resistor, the second number is the total
+      resistance. Therefore, the adjusted vout is equal to
+      Vout = Vout * output_resistance / total resistance.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      max20730@10 {
+        compatible = "maxim,max20730";
+        reg = <0x10>;
+        vout-voltage-divider = <1000 2000>; // vout would be scaled to 0.5
+      };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
new file mode 100644
index 000000000000..6f3e3c01f717
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Moortec Semiconductor MR75203 PVT Controller bindings
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+properties:
+  compatible:
+    const: moortec,mr75203
+
+  reg:
+    items:
+      - description: PVT common registers
+      - description: PVT temprature sensor registers
+      - description: PVT process detector registers
+      - description: PVT voltage monitor registers
+
+  reg-names:
+    items:
+      - const: common
+      - const: ts
+      - const: pd
+      - const: vm
+
+  intel,vm-map:
+    description:
+      PVT controller has 5 VM (voltage monitor) sensors.
+      vm-map defines CPU core to VM instance mapping. A
+      value of 0xff means that VM sensor is unused.
+    $ref: /schemas/types.yaml#definitions/uint8-array
+    maxItems: 5
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - intel,vm-map
+  - clocks
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pvt: pvt@e0680000 {
+        compatible = "moortec,mr75203";
+        reg = <0xe0680000 0x80>,
+              <0xe0680080 0x180>,
+              <0xe0680200 0x200>,
+              <0xe0680400 0xc00>;
+        reg-names = "common", "ts", "pd", "vm";
+        intel,vm-map = [03 01 04 ff ff];
+        clocks = <&osc0>;
+        resets = <&rcu0 0x40 7>;
+        #thermal-sensor-cells = <1>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 000000000000..c523a1beb2b7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+  - Christopher Ruehl chris.ruehl@gtsys.com.hk
+
+description: |
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  designed especially for battery-driven high-volume consumer electronics
+  applications.
+  For further information refere to Documentation/hwmon/shtc1.rst
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,shtc1
+      - sensirion,shtw1
+      - sensirion,shtc3
+
+  reg:
+    const: 0x70
+
+  sensirion,blocking-io:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      If set, the driver hold the i2c bus until measurement is finished.
+
+  sensirion,low-precision:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      If set, the sensor aquire data with low precision (not recommended).
+      The driver aquire data with high precision by default.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clock-frequency = <400000>;
+
+      shtc3@70 {
+        compatible = "sensirion,shtc3";
+        reg = <0x70>;
+        sensirion,blocking-io;
+      };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 49cad273c8e5..6ecb0270d88d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -36,6 +36,8 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     i2c@c8100500 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index dc0952f3780f..1ca1cd19bd1d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -44,6 +44,8 @@ required:
   - clocks
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
new file mode 100644
index 000000000000..b386e4128a79
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
+
+maintainers:
+  - Doug Anderson <dianders@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  On some ChromeOS board designs we've got a connection to the EC
+  (embedded controller) but no direct connection to some devices on the
+  other side of the EC (like a battery and PMIC).  To get access to
+  those devices we need to tunnel our i2c commands through the EC.
+
+  The node for this device should be under a cros-ec node like
+  google,cros-ec-spi or google,cros-ec-i2c.
+
+allOf:
+  - $ref: i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: google,cros-ec-i2c-tunnel
+
+  google,remote-bus:
+    description: The EC bus we'd like to talk to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - google,remote-bus
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+
+            i2c-tunnel {
+                compatible = "google,cros-ec-i2c-tunnel";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                google,remote-bus = <0>;
+
+                battery: sbs-battery@b {
+                    compatible = "sbs,sbs-battery";
+                    reg = <0xb>;
+                    sbs,poll-retry-count = <1>;
+                };
+            };
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
deleted file mode 100644
index 898f030eba62..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-I2C bus that tunnels through the ChromeOS EC (cros-ec)
-======================================================
-On some ChromeOS board designs we've got a connection to the EC (embedded
-controller) but no direct connection to some devices on the other side of
-the EC (like a battery and PMIC).  To get access to those devices we need
-to tunnel our i2c commands through the EC.
-
-The node for this device should be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-
-Required properties:
-- compatible: google,cros-ec-i2c-tunnel
-- google,remote-bus: The EC bus we'd like to talk to.
-
-Optional child nodes:
-- One node per I2C device connected to the tunnelled I2C bus.
-
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-
-		...
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-		};
-	}
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index 78ffcab2428c..cc3aa2a5e70b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -70,4 +70,6 @@ required:
   - sda-gpios
   - scl-gpios
 
+unevaluatedProperties: false
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
index ac0bc5dd64d6..29b9447f3b84 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -9,12 +9,18 @@ title: Freescale Low Power Inter IC (LPI2C) for i.MX
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
 properties:
   compatible:
-    enum:
-      - fsl,imx7ulp-lpi2c
-      - fsl,imx8qxp-lpi2c
-      - fsl,imx8qm-lpi2c
+    oneOf:
+      - enum:
+          - fsl,imx7ulp-lpi2c
+          - fsl,imx8qm-lpi2c
+      - items:
+          - const: fsl,imx8qxp-lpi2c
+          - const: fsl,imx7ulp-lpi2c
 
   reg:
     maxItems: 1
@@ -22,23 +28,34 @@ properties:
   interrupts:
     maxItems: 1
 
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+  clock-frequency: true
+
+  clock-names:
+    maxItems: 1
+
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/imx7ulp-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    lpi2c7@40a50000 {
+    i2c@40a50000 {
         compatible = "fsl,imx7ulp-lpi2c";
         reg = <0x40A50000 0x10000>;
         interrupt-parent = <&intc>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-imx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index 810536953177..f23966b0d6c6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -9,6 +9,9 @@ title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
 maintainers:
   - Wolfram Sang <wolfram@the-dreams.de>
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -18,6 +21,9 @@ properties:
       - items:
           - const: fsl,imx35-i2c
           - const: fsl,imx1-i2c
+      - items:
+          - const: fsl,imx7d-i2c
+          - const: fsl,imx21-i2c
       - items:
           - enum:
               - fsl,imx25-i2c
@@ -75,7 +81,7 @@ required:
   - interrupts
   - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
index 790aa7218ee0..7f254d79558c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -117,6 +117,8 @@ then:
   required:
     - rockchip,grf
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/rk3188-cru-common.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c.txt
index a21c359b9f02..df41f72afc87 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/i2c.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -87,6 +87,11 @@ wants to support one of the below features, it should adapt these bindings.
 	this information to detect a stalled bus more reliably, for example.
 	Can not be combined with 'multi-master'.
 
+- smbus
+	states that additional SMBus restrictions and features apply to this bus.
+	Examples of features are SMBusHostNotify and SMBusAlert. Examples of
+	restrictions are more reserved addresses and timeout definitions.
+
 Required properties (per child device)
 --------------------------------------
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
index 682ed1bbf5c6..e1e65eb4f795 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -17,9 +17,13 @@ properties:
     pattern: "^i2c@[0-9a-f]+$"
 
   compatible:
-    enum:
-      - ingenic,jz4780-i2c
-      - ingenic,x1000-i2c
+    oneOf:
+      - enum:
+          - ingenic,jz4770-i2c
+          - ingenic,x1000-i2c
+      - items:
+          - const: ingenic,jz4780-i2c
+          - const: ingenic,jz4770-i2c
 
   reg:
     maxItems: 1
@@ -60,7 +64,7 @@ examples:
     #include <dt-bindings/dma/jz4780-dma.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c@10054000 {
-      compatible = "ingenic,jz4780-i2c";
+      compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
       #address-cells = <1>;
       #size-cells = <0>;
       reg = <0x10054000 0x1000>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
new file mode 100644
index 000000000000..566ea861aa00
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
@@ -0,0 +1,42 @@
+Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs
+
+Required Properties:
+
+- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2".
+
+- reg : address offset and length of the device registers. The
+	registers consist of the following set of resources:
+		1) Smbus block registers.
+		2) Cause master registers.
+		3) Cause slave registers.
+		4) Cause coalesce registers (if compatible isn't set
+		   to "mellanox,i2c-mlxbf1").
+
+- interrupts : interrupt number.
+
+Optional Properties:
+
+- clock-frequency : bus frequency used to configure timing registers;
+			allowed values are 100000, 400000 and 1000000;
+			those are expressed in Hz. Default is 100000.
+
+Example:
+
+i2c@2804000 {
+	compatible = "mellanox,i2c-mlxbf1";
+	reg =	<0x02804000 0x800>,
+		<0x02801200 0x020>,
+		<0x02801260 0x020>;
+	interrupts = <57>;
+	clock-frequency = <100000>;
+};
+
+i2c@2808800 {
+	compatible = "mellanox,i2c-mlxbf2";
+	reg =	<0x02808800 0x600>,
+	        <0x02808e00 0x020>,
+		<0x02808e20 0x020>,
+		<0x02808e40 0x010>;
+	interrupts = <57>;
+	clock-frequency = <400000>;
+};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
index 15abc022968e..c76131902b77 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -37,6 +37,8 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     i2c0: i2c@58780000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
index ef998def554e..ddde08636ab0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -37,6 +37,8 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     i2c0: i2c@58400000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index f2fcbb361180..d747f4990ad8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -94,6 +94,8 @@ required:
   - resets
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/mfd/stm32f7-rcc.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 67c1c84ba3dc..ffb2ed039a5e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -36,6 +36,8 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     axi_iic_0: i2c@40800000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 4147f02b5e3c..4fcbfd93e218 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -25,11 +25,15 @@ properties:
   interrupts:
     maxItems: 1
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index fd4eaa3d0ab4..11d32a288535 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,6 +32,8 @@ properties:
 
   spi-cpol: true
 
+  spi-max-frequency: true
+
   interrupts:
     maxItems: 1
 
@@ -40,6 +42,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index e7daffec88d3..38b59b6454ce 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,11 +25,15 @@ properties:
   interrupts:
     maxItems: 1
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index d61ab4fa3d71..390b87242fcb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,10 +29,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     # include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ad7949.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ad7949.txt
deleted file mode 100644
index c7f5057356b1..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ad7949.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Analog Devices AD7949/AD7682/AD7689
-
-Required properties:
- - compatible: Should be one of
-	* "adi,ad7949"
-	* "adi,ad7682"
-	* "adi,ad7689"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
-
-Example:
-adc@0 {
-	compatible = "adi,ad7949";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index deb34deff0e8..f1c574c896cb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -52,6 +52,8 @@ properties:
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
@@ -108,6 +110,8 @@ patternProperties:
       - reg
       - diff-channels
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index d0913034b1d8..e0cc3b2e8957 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -30,6 +30,8 @@ properties:
 
   spi-cpha: true
 
+  spi-max-frequency: true
+
   clocks:
     maxItems: 1
     description: phandle to the master clock (mclk)
@@ -92,6 +94,8 @@ required:
   - spi-cpol
   - spi-cpha
 
+additionalProperties: false
+
 examples:
   - |
     spi0 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
new file mode 100644
index 000000000000..930f9e3904d7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7291.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+description: |
+  Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7291
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC reference voltage.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7291: adc@0 {
+        compatible = "adi,ad7291";
+        reg = <0>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
+
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index e1f6d64bdccd..108d202b288f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,6 +30,8 @@ properties:
 
   spi-cpha: true
 
+  spi-max-frequency: true
+
   '#address-cells':
     const: 1
 
@@ -63,6 +65,8 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index cbb8819d7069..73775174cf57 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -31,6 +31,10 @@ properties:
 
   spi-cpha: true
 
+  spi-cpol: true
+
+  spi-max-frequency: true
+
   avcc-supply: true
 
   interrupts:
@@ -102,6 +106,8 @@ required:
   - interrupts
   - adi,conversion-start-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
deleted file mode 100644
index 9f5b88cf680d..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Analog Devices AD7768-1 ADC device driver
-
-Required properties for the AD7768-1:
-
-- compatible: Must be "adi,ad7768-1"
-- reg: SPI chip select number for the device
-- spi-max-frequency: Max SPI frequency to use
-	see: Documentation/devicetree/bindings/spi/spi-bus.txt
-- clocks: phandle to the master clock (mclk)
-	see: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names: Must be "mclk".
-- interrupts: IRQ line for the ADC
-	see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- vref-supply: vref supply can be used as reference for conversion
-- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables
-	synchronization of multiple devices that require simultaneous sampling.
-	A pulse is always required if the configuration is changed in any way, for example
-	if the filter decimation rate changes. As the line is active low, it should
-	be marked GPIO_ACTIVE_LOW.
-
-Optional properties:
-
- - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during
-	driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW.
-
-Example:
-
-	adc@0 {
-		compatible = "adi,ad7768-1";
-		reg = <0>;
-		spi-max-frequency = <2000000>;
-		spi-cpol;
-		spi-cpha;
-		vref-supply = <&adc_vref>;
-		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gpio>;
-		adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-		reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
-		clocks = <&ad7768_mclk>;
-		clock-names = "mclk";
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
new file mode 100644
index 000000000000..8f32800fe5b7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7768-1 ADC device driver
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Datasheet at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+
+properties:
+  compatible:
+    const: adi,ad7768-1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      ADC reference voltage supply
+
+  adi,sync-in-gpios:
+    description:
+      Enables synchronization of multiple devices that require simultaneous
+      sampling. A pulse is always required if the configuration is changed
+      in any way, for example if the filter decimation rate changes.
+      As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+  - adi,sync-in-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7768-1";
+            reg = <0>;
+            spi-max-frequency = <2000000>;
+            spi-cpol;
+            spi-cpha;
+            vref-supply = <&adc_vref>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+            adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            clocks = <&ad7768_mclk>;
+            clock-names = "mclk";
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index a11b918e0016..e82194974eea 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -43,10 +43,14 @@ properties:
   '#size-cells':
     const: 0
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
new file mode 100644
index 000000000000..9b56bd4d5510
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7949.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7949/AD7682/AD7689 analog to digital converters
+
+maintainers:
+  - Charles-Antoine Couret <charles-antoine.couret@essensium.com>
+
+description: |
+  Specifications on the converters can be found at:
+    AD7949:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf
+    AD7682/AD7698:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7682
+      - adi,ad7689
+      - adi,ad7949
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      ADC reference voltage supply
+
+  spi-max-frequency: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7949";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index c4f57fa6aad1..b5aed40d8a50 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -4,21 +4,30 @@
 $id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD9467 High-Speed ADC
+title: Analog Devices AD9467 and similar High-Speed ADCs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
   - Alexandru Ardelean <alexandru.ardelean@analog.com>
 
 description: |
-  The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital
-  converter (ADC).
+  The AD9467 and the parts similar with it, are high-speed analog-to-digital
+  converters (ADCs), operating in the range of 100 to 500 mega samples
+  per second (MSPS). Some parts support higher MSPS and some
+  lower MSPS, suitable for the intended application of each part.
 
+  All the parts support the register map described by Application Note AN-877
+   https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9265.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
 
 properties:
   compatible:
     enum:
+      - adi,ad9265
+      - adi,ad9434
       - adi,ad9467
 
   reg:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ads1015.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ads1015.txt
deleted file mode 100644
index 918a507d1159..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ads1015.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-ADS1015 (I2C)
-
-This device is a 12-bit A-D converter with 4 inputs.
-
-The inputs can be used single ended or in certain differential combinations.
-
-For configuration all possible combinations are mapped to 8 channels:
-  0: Voltage over AIN0 and AIN1.
-  1: Voltage over AIN0 and AIN3.
-  2: Voltage over AIN1 and AIN3.
-  3: Voltage over AIN2 and AIN3.
-  4: Voltage over AIN0 and GND.
-  5: Voltage over AIN1 and GND.
-  6: Voltage over AIN2 and GND.
-  7: Voltage over AIN3 and GND.
-
-Each channel can be configured individually:
- - pga is the programmable gain amplifier (values are full scale)
-    0: +/- 6.144 V
-    1: +/- 4.096 V
-    2: +/- 2.048 V (default)
-    3: +/- 1.024 V
-    4: +/- 0.512 V
-    5: +/- 0.256 V
- - data_rate in samples per second
-    0: 128
-    1: 250
-    2: 490
-    3: 920
-    4: 1600 (default)
-    5: 2400
-    6: 3300
-
-1) The /ads1015 node
-
-  Required properties:
-
-   - compatible : must be "ti,ads1015"
-   - reg : I2C bus address of the device
-   - #address-cells : must be <1>
-   - #size-cells : must be <0>
-
-  The node contains child nodes for each channel that the platform uses.
-
-  Example ADS1015 node:
-
-    ads1015@49 {
-	    compatible = "ti,ads1015";
-	    reg = <0x49>;
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    [ child node definitions... ]
-    }
-
-2) channel nodes
-
-  Required properties:
-
-   - reg : the channel number
-
-  Optional properties:
-
-   - ti,gain : the programmable gain amplifier setting
-   - ti,datarate : the converter data rate
-
-  Example ADS1015 channel node:
-
-    channel@4 {
-	    reg = <4>;
-	    ti,gain = <3>;
-	    ti,datarate = <5>;
-    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
deleted file mode 100644
index d57e9df25f4f..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Amlogic Meson SAR (Successive Approximation Register) A/D converter
-
-Required properties:
-- compatible:	depending on the SoC this should be one of:
-			- "amlogic,meson8-saradc" for Meson8
-			- "amlogic,meson8b-saradc" for Meson8b
-			- "amlogic,meson8m2-saradc" for Meson8m2
-			- "amlogic,meson-gxbb-saradc" for GXBB
-			- "amlogic,meson-gxl-saradc" for GXL
-			- "amlogic,meson-gxm-saradc" for GXM
-			- "amlogic,meson-axg-saradc" for AXG
-			- "amlogic,meson-g12a-saradc" for AXG
-		along with the generic "amlogic,meson-saradc"
-- reg:		the physical base address and length of the registers
-- interrupts:	the interrupt indicating end of sampling
-- clocks:	phandle and clock identifier (see clock-names)
-- clock-names:	mandatory clocks:
-			- "clkin" for the reference clock (typically XTAL)
-			- "core" for the SAR ADC core clock
-		optional clocks:
-			- "adc_clk" for the ADC (sampling) clock
-			- "adc_sel" for the ADC (sampling) clock mux
-- vref-supply:	the regulator supply for the ADC reference voltage
-- #io-channel-cells: must be 1, see ../iio-bindings.txt
-
-Optional properties:
-- amlogic,hhi-sysctrl:	phandle to the syscon which contains the 5th bit
-			of the TSC (temperature sensor coefficient) on
-			Meson8b and Meson8m2 (which used to calibrate the
-			temperature sensor)
-- nvmem-cells:		phandle to the temperature_calib eFuse cells
-- nvmem-cell-names:	if present (to enable the temperature sensor
-			calibration) this must contain "temperature_calib"
-
-
-Example:
-	saradc: adc@8680 {
-		compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
-		#io-channel-cells = <1>;
-		reg = <0x0 0x8680 0x0 0x34>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xtal>,
-			 <&clkc CLKID_SAR_ADC>,
-			 <&clkc CLKID_SANA>,
-			 <&clkc CLKID_SAR_ADC_CLK>,
-			 <&clkc CLKID_SAR_ADC_SEL>;
-		clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
new file mode 100644
index 000000000000..3be8955587e4
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/amlogic,meson-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SAR (Successive Approximation Register) A/D converter
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description:
+  Binding covers a range of ADCs found on Amlogic Meson SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-saradc
+      - items:
+          - enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+              - amlogic,meson-gxbb-saradc
+              - amlogic,meson-gxl-saradc
+              - amlogic,meson-gxm-saradc
+              - amlogic,meson-axg-saradc
+              - amlogic,meson-g12a-saradc
+          - const: amlogic,meson-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt indicates end of sampling.
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      - const: clkin
+      - const: core
+      - const: adc_clk
+      - const: adc_sel
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+  amlogic,hhi-sysctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon which contains the 5th bit of the TSC (temperature sensor
+      coefficient) on Meson8b and Meson8m2 (which used to calibrate the
+      temperature sensor)
+
+  nvmem-cells:
+    description: phandle to the temperature_calib eFuse cells
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: temperature_calib
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+    else:
+      properties:
+        nvmem-cells: false
+        mvmem-cel-names: false
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        amlogic,hhi-sysctrl: true
+    else:
+      properties:
+        amlogic,hhi-sysctrl: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        adc@8680 {
+            compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x8680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>,
+                <&clkc CLKID_SAR_ADC>,
+                <&clkc CLKID_SAR_ADC_CLK>,
+                <&clkc CLKID_SAR_ADC_SEL>;
+            clock-names = "clkin", "core", "adc_clk", "adc_sel";
+        };
+        adc@9680 {
+            compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x9680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+            clock-names = "clkin", "core";
+            nvmem-cells = <&tsens_caldata>;
+            nvmem-cell-names = "temperature_calib";
+            amlogic,hhi-sysctrl = <&hhi>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
new file mode 100644
index 000000000000..7f534a933e92
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2400-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+description:
+  This device is a 10-bit converter for 16 voltage channels.  All inputs are
+  single ended.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-adc
+      - aspeed,ast2500-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    adc@1e6e9000 {
+        compatible = "aspeed,ast2400-adc";
+        reg = <0x1e6e9000 0xb0>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
deleted file mode 100644
index 034fc2ba100e..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Aspeed ADC
-
-This device is a 10-bit converter for 16 voltage channels.  All inputs are
-single ended.
-
-Required properties:
-- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc"
-- reg: memory window mapping address and length
-- clocks: Input clock used to derive the sample clock. Expected to be the
-          SoC's APB clock.
-- resets: Reset controller phandle
-- #io-channel-cells: Must be set to <1> to indicate channels are selected
-                     by index.
-
-Example:
-	adc@1e6e9000 {
-		compatible = "aspeed,ast2400-adc";
-		reg = <0x1e6e9000 0xb0>;
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_ADC>;
-		#io-channel-cells = <1>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
deleted file mode 100644
index 908334c6b07f..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Berlin Analog to Digital Converter (ADC)
-
-The Berlin ADC has 8 channels, with one connected to a temperature sensor.
-It is part of the system controller register set. The ADC node should be a
-sub-node of the system controller node.
-
-Required properties:
-- compatible: must be "marvell,berlin2-adc"
-- interrupts: the interrupts for the ADC and the temperature sensor
-- interrupt-names: should be "adc" and "tsen"
-
-Example:
-
-adc: adc {
-	compatible = "marvell,berlin2-adc";
-	interrupt-parent = <&sic>;
-	interrupts = <12>, <14>;
-	interrupt-names = "adc", "tsen";
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt
deleted file mode 100644
index 904f76de9055..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC)
-
-Required properties:
-  - compatible: Should be "cosmic,10001-adc"
-  - reg: Should contain adc registers location and length.
-  - clock-names: Should contain "adc".
-  - clocks: Should contain a clock specifier for each entry in clock-names
-  - vref-supply: The regulator supply ADC reference voltage.
-
-Optional properties:
-  - adc-reserved-channels: Bitmask of reserved channels,
-    i.e. channels that cannot be used by the OS.
-
-Example:
-adc: adc@18101600 {
-	compatible = "cosmic,10001-adc";
-	reg = <0x18101600 0x24>;
-	adc-reserved-channels = <0x2>;
-	clocks = <&adc_clk>;
-	clock-names = "adc";
-	vref-supply = <&reg_1v8>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
new file mode 100644
index 000000000000..4e695b97d015
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cosmic Circuits CC-10001 ADC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Cosmic Circuits 10001 10-bit ADC device.
+
+properties:
+  compatible:
+    const: cosmic,10001-adc
+
+  reg:
+    maxItems: 1
+
+  adc-reserved-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask of reserved channels, i.e. channels that cannot be
+      used by the OS.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    adc@18101600 {
+        compatible = "cosmic,10001-adc";
+        reg = <0x18101600 0x24>;
+        adc-reserved-channels = <0x2>;
+        clocks = <&adc_clk>;
+        clock-names = "adc";
+        vref-supply = <&reg_1v8>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
deleted file mode 100644
index ec04008e8f4f..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Motorola CPCAP PMIC ADC binding
-
-Required properties:
-- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc"
-- interrupts: The interrupt number for the ADC device
-- interrupt-names: Should be "adcdone"
-- #io-channel-cells: Number of cells in an IIO specifier
-
-Example:
-
-cpcap_adc: adc {
-	compatible = "motorola,mapphone-cpcap-adc";
-	interrupt-parent = <&cpcap>;
-	interrupts = <8 IRQ_TYPE_NONE>;
-	interrupt-names = "adcdone";
-	#io-channel-cells = <1>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
deleted file mode 100644
index c07228da92ac..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Dialog Semiconductor DA9150 IIO GPADC bindings
-
-Required properties:
-- compatible: "dlg,da9150-gpadc" for DA9150 IIO GPADC
-- #io-channel-cells: Should be set to <1>
-  (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info)
-
-For further information on GPADC channels, see device datasheet.
-
-
-Example:
-
-	gpadc: da9150-gpadc {
-		compatible = "dlg,da9150-gpadc";
-		#io-channel-cells = <1>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml
new file mode 100644
index 000000000000..cc29a2f2111a
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/dlg,da9150-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 IIO GPADC
+
+maintainers:
+  - Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+
+description:
+  This patch adds support for general purpose ADC within the
+  DA9150 Charger & Fuel-Gauge IC.
+
+properties:
+  compatible:
+    const: dlg,da9150-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "dlg,da9150-gpadc";
+        #io-channel-cells = <1>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
deleted file mode 100644
index eebdcec3dab5..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Freescale i.MX25 ADC GCQ device
-
-This is a generic conversion queue device that can convert any of the
-analog inputs using the ADC unit of the i.MX25.
-
-Required properties:
- - compatible: Should be "fsl,imx25-gcq".
- - reg: Should be the register range of the module.
- - interrupts: Should be the interrupt number of the module.
-   Typically this is <1>.
- - #address-cells: Should be <1> (setting for the subnodes)
- - #size-cells: Should be <0> (setting for the subnodes)
-
-Optional properties:
- - vref-ext-supply: The regulator supplying the ADC reference voltage.
-   Required when at least one subnode uses the this reference.
- - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP.
-   Required when at least one subnode uses this reference.
- - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP.
-   Required when at least one subnode uses this reference.
-
-Sub-nodes:
-Optionally you can define subnodes which define the reference voltage
-for the analog inputs.
-
-Required properties for subnodes:
- - reg: Should be the number of the analog input.
-     0: xp
-     1: yp
-     2: xn
-     3: yn
-     4: wiper
-     5: inaux0
-     6: inaux1
-     7: inaux2
-Optional properties for subnodes:
- - fsl,adc-refp: specifies the positive reference input as defined in
-     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
- - fsl,adc-refn: specifies the negative reference input as defined in
-     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
-
-Example:
-
-	adc: adc@50030800 {
-		compatible = "fsl,imx25-gcq";
-		reg = <0x50030800 0x60>;
-		interrupt-parent = <&tscadc>;
-		interrupts = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		inaux@5 {
-			reg = <5>;
-			fsl,adc-refp = <MX25_ADC_REFP_INT>;
-			fsl,adc-refn = <MX25_ADC_REFN_NGND>;
-		};
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
new file mode 100644
index 000000000000..e9103497e3a4
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx25-gcq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC GCQ device
+
+description:
+  This is a generic conversion queue device that can convert any of the
+  analog inputs using the ADC unit of the i.MX25.
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: fsl,imx25-gcq
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-ext-supply:
+    description:
+      The regulator supplying the ADC reference voltage.
+      Required when at least one subnode uses the this reference.
+
+  vref-xp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin XP.
+      Required when at least one subnode uses this reference.
+
+  vref-yp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin YP.
+      Required when at least one subnode uses this reference.
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "[a-z][a-z0-9]+@[0-9a-f]+$":
+    type: object
+    description:
+      Child nodes used to define the reference voltages used for each channel
+
+    properties:
+      reg:
+        description: |
+          Number of the analog input.
+          0: xp
+          1: yp
+          2: xn
+          3: yn
+          4: wiper
+          5: inaux0
+          6: inaux1
+          7: inaux2
+        items:
+          - minimum: 0
+            maximum: 7
+
+      fsl,adc-refp:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the positive reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: YP voltage reference
+          1: XP voltage reference
+          2: External voltage reference
+          3: Internal voltage reference (default)
+        minimum: 0
+        maximum: 3
+
+      fsl,adc-refn:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the negative reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: XN ground reference
+          1: YN ground reference
+          2: Internal ground reference
+          3: External ground reference (default)
+        minimum: 0
+        maximum: 3
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@50030800 {
+            compatible = "fsl,imx25-gcq";
+            reg = <0x50030800 0x60>;
+            interrupt-parent = <&tscadc>;
+            interrupts = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            inaux@5 {
+                reg = <5>;
+                fsl,adc-refp = <MX25_ADC_REFP_INT>;
+                fsl,adc-refn = <MX25_ADC_REFN_NGND>;
+            };
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
new file mode 100644
index 000000000000..afc5cc48a0ce
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx7d-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC found on the imx7d SoC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx7d-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@30610000 {
+            compatible = "fsl,imx7d-adc";
+            reg = <0x30610000 0x10000>;
+            interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+            clock-names = "adc";
+            vref-supply = <&reg_vcc_3v3_mcu>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
new file mode 100644
index 000000000000..1ca571056ea9
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC found on Freescale vf610 and similar SoCs
+
+maintainers:
+  - Fugang Duan <fugang.duan@nxp.com>
+
+description:
+  ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
+
+properties:
+  compatible:
+    const: fsl,vf610-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: ADC source clock (ipg clock)
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply:
+    description: ADC reference voltage supply.
+
+  fsl,adck-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 3
+    description: |
+      Maximum frequencies from datasheet operating requirements.
+      Three values necessary to cover the 3 conversion modes.
+      * Frequency in normal mode (ADLPC=0, ADHSC=0)
+      * Frequency in high-speed mode (ADLPC=0, ADHSC=1)
+      * Frequency in low-power mode (ADLPC=1, ADHSC=0)
+
+  min-sample-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Minimum sampling time in nanoseconds. This value has
+      to be chosen according to the conversion mode and the connected analog
+      source resistance (R_as) and capacitance (C_as). Refer the datasheet's
+      operating requirements. A safe default across a wide range of R_as and
+      C_as as well as conversion modes is 1000ns.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+    adc@4003b000 {
+        compatible = "fsl,vf610-adc";
+        reg = <0x4003b000 0x1000>;
+        interrupts = <0 53 0x04>;
+        clocks = <&clks VF610_CLK_ADC0>;
+        clock-names = "adc";
+        fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>;
+        vref-supply = <&reg_vcc_3v3_mcu>;
+        min-sample-time = <10000>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/hi8435.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/hi8435.txt
deleted file mode 100644
index 3b0348c5e516..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/hi8435.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Holt Integrated Circuits HI-8435 threshold detector bindings
-
-Required properties:
- - compatible: should be "holt,hi8435"
- - reg: spi chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
- - gpios: GPIO used for controlling the reset pin
-
-Example:
-sensor@0 {
-	compatible = "holt,hi8435";
-	reg = <0>;
-	gpios = <&gpio6 1 0>;
-
-	spi-max-frequency = <1000000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
new file mode 100644
index 000000000000..52490cbb0af0
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Holt Integrated Circuits HI-8435 SPI threshold detector
+
+maintainers:
+  - Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+
+description: |
+  Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do
+
+properties:
+  compatible:
+    const: holt,hi8435
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    description:
+      GPIO used for controlling the reset pin
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        threshold-detector@0 {
+            compatible = "holt,hi8435";
+            reg = <0>;
+            gpios = <&gpio6 1 0>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
deleted file mode 100644
index f1f3a552459b..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Freescale imx7d ADC bindings
-
-The devicetree bindings are for the ADC driver written for
-imx7d SoC.
-
-Required properties:
-- compatible: Should be "fsl,imx7d-adc"
-- reg: Offset and length of the register set for the ADC device
-- interrupts: The interrupt number for the ADC device
-- clocks: The root clock of the ADC controller
-- clock-names: Must contain "adc", matching entry in the clocks property
-- vref-supply: The regulator supply ADC reference voltage
-- #io-channel-cells: Must be 1 as per ../iio-bindings.txt
-
-Example:
-adc1: adc@30610000 {
-	compatible = "fsl,imx7d-adc";
-	reg = <0x30610000 0x10000>;
-	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-	clock-names = "adc";
-	vref-supply = <&reg_vcc_3v3_mcu>;
-	#io-channel-cells = <1>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
new file mode 100644
index 000000000000..c1772b568cd1
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2497 ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  16bit ADC supporting up to 16 single ended or 8 differential inputs.
+  I2C interface.
+
+properties:
+  compatible:
+    const:
+      lltc,ltc2497
+
+  reg: true
+  vref-supply: true
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@76 {
+            compatible = "lltc,ltc2497";
+            reg = <0x76>;
+            vref-supply = <&ltc2497_reg>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
deleted file mode 100644
index 9ada5abd45fa..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-NXP LPC1850 ADC bindings
-
-Required properties:
-- compatible: Should be "nxp,lpc1850-adc"
-- reg: Offset and length of the register set for the ADC device
-- interrupts: The interrupt number for the ADC device
-- clocks: The root clock of the ADC controller
-- vref-supply: The regulator supply ADC reference voltage
-- resets: phandle to reset controller and line specifier
-
-Example:
-
-adc0: adc@400e3000 {
-	compatible = "nxp,lpc1850-adc";
-	reg = <0x400e3000 0x1000>;
-	interrupts = <17>;
-	clocks = <&ccu1 CLK_APB3_ADC0>;
-	vref-supply = <&reg_vdda>;
-	resets = <&rgu 40>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
deleted file mode 100644
index 3a1bc669bd51..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/lpc32xx-adc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* NXP LPC32xx SoC ADC controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-adc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: The ADC interrupt
-
-Optional:
- - vref-supply: The regulator supply ADC reference voltage, optional
-   for legacy reason, but highly encouraging to us in new device tree
-
-Example:
-
-	adc@40048000 {
-		compatible = "nxp,lpc3220-adc";
-		reg = <0x40048000 0x1000>;
-		interrupt-parent = <&mic>;
-		interrupts = <39 0>;
-		vref-supply = <&vcc>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ltc2497.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
deleted file mode 100644
index a237ed99c0d8..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ltc2497.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Linear Technology / Analog Devices LTC2497 ADC
-
-Required properties:
- - compatible: Must be "lltc,ltc2497"
- - reg: Must contain the ADC I2C address
- - vref-supply: The regulator supply for ADC reference voltage
-
-Example:
-	ltc2497: adc@76 {
-		compatible = "lltc,ltc2497";
-		reg = <0x76>;
-		vref-supply = <&ltc2497_reg>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
new file mode 100644
index 000000000000..b3b292fb1c59
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/marvell,berlin2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Berlin 2 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Antoine Tenart <antoine.tenart@free-electrons.com>
+
+description:
+  The Berlin ADC has 8 channels, with one connected to a temperature sensor.
+  It is part of the system controller register set. The ADC node should be a
+  sub-node of the system controller node.
+
+properties:
+  compatible:
+    const: marvell,berlin2-adc
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: adc
+      - const: tsen
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl {
+        adc {
+            compatible = "marvell,berlin2-adc";
+            interrupt-parent = <&sic>;
+            interrupts = <12>, <14>;
+            interrupt-names = "adc", "tsen";
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/max11100.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/max11100.txt
deleted file mode 100644
index b7f7177b8aca..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/max11100.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Maxim max11100 Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "maxim,max11100"
-  - reg: the adc unit address
-  - vref-supply: phandle to the regulator that provides reference voltage
-
-Optional properties:
-  - spi-max-frequency: SPI maximum frequency
-
-Example:
-
-max11100: adc@0 {
-        compatible = "maxim,max11100";
-        reg = <0>;
-        vref-supply = <&adc0_vref>;
-        spi-max-frequency = <240000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/max1118.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/max1118.txt
deleted file mode 100644
index cf33d0b15a6d..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/max1118.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs
-
-Required properties:
- - compatible: Should be one of
-	* "maxim,max1117"
-	* "maxim,max1118"
-	* "maxim,max1119"
- - reg: spi chip select number for the device
- - (max1118 only) vref-supply: The regulator supply for ADC reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "maxim,max1118";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/max9611.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/max9611.txt
deleted file mode 100644
index ab4f43145ae5..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/max9611.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
-
-Maxim max9611/max9612 is an high-side current sense amplifier with integrated
-12-bits ADC communicating over I2c bus.
-The device node for this driver shall be a child of a I2c controller.
-
-Required properties
-  - compatible: Should be "maxim,max9611" or "maxim,max9612"
-  - reg: The 7-bits long I2c address of the device
-  - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
-			        resistor
-
-Example:
-
-&i2c4 {
-	csa: adc@7c {
-		compatible = "maxim,max9611";
-		reg = <0x7c>;
-
-		shunt-resistor-micro-ohms = <5000>;
-	};
-};
-
-This device node describes a current sense amplifier sitting on I2c4 bus
-with address 0x7c (read address is 0xf9, write address is 0xf8).
-A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
-inputs.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
new file mode 100644
index 000000000000..0cf87556ef82
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11100 ADC
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+    Single channel 16 bit ADC with SPI interface.
+
+properties:
+  compatible:
+    const: maxim,max11100
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling.
+
+  spi-max-frequency:
+    minimum: 100000
+    maximum: 4800000
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max11100";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <240000>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
new file mode 100644
index 000000000000..e948b3e37b0c
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1118.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1118 and similar ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+    Dual channel 8bit ADCs.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1117
+      - maxim,max1118
+      - maxim,max1119
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: maxim,max1118
+then:
+  required:
+    - vref-supply
+else:
+  properties:
+    vref-supply: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1118";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
index cccd3033a55b..50bcd72ac9d6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
@@ -62,6 +62,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index f562505f5ecd..4c7e0d94bff1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,12 +39,16 @@ properties:
       thus enabling power-down mode.
     maxItems: 1
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - vdd-supply
   - vref-supply
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
index 48377549c39a..e04f09f35601 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
@@ -36,6 +36,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
new file mode 100644
index 000000000000..9475a9e6e920
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+   These devices combine a high-side current sense amplifier with a 12 bit ADC.
+   They have an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max9611
+      - maxim,max9612
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Value in micro Ohms of the shunt resistor connected between the RS+ and
+      RS- inputs, across which the current is measured.  Value needed to compute
+      the scaling of the measured current.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@7c {
+            compatible = "maxim,max9611";
+            reg = <0x7c>;
+            shunt-resistor-micro-ohms = <5000>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/mcp320x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
deleted file mode 100644
index 56373d643f76..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Microchip Analog to Digital Converter (ADC)
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-        Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Required properties:
-	- compatible:  	Must be one of the following, depending on the
-			model:
-				"mcp3001" (DEPRECATED)
-				"mcp3002" (DEPRECATED)
-				"mcp3004" (DEPRECATED)
-				"mcp3008" (DEPRECATED)
-				"mcp3201" (DEPRECATED)
-				"mcp3202" (DEPRECATED)
-				"mcp3204" (DEPRECATED)
-				"mcp3208" (DEPRECATED)
-				"mcp3301" (DEPRECATED)
-
-				"microchip,mcp3001"
-				"microchip,mcp3002"
-				"microchip,mcp3004"
-				"microchip,mcp3008"
-				"microchip,mcp3201"
-				"microchip,mcp3202"
-				"microchip,mcp3204"
-				"microchip,mcp3208"
-				"microchip,mcp3301"
-				"microchip,mcp3550-50"
-				"microchip,mcp3550-60"
-				"microchip,mcp3551"
-				"microchip,mcp3553"
-
-			NOTE: The use of the compatibles with no vendor prefix
-			is deprecated and only listed because old DT use them.
-
-	- spi-cpha, spi-cpol (boolean):
-			Either SPI mode (0,0) or (1,1) must be used, so specify
-			none or both of spi-cpha, spi-cpol.  The MCP3550/1/3
-			is more efficient in mode (1,1) as only 3 instead of
-			4 bytes need to be read from the ADC, but not all SPI
-			masters support it.
-
-	- vref-supply:	Phandle to the external reference voltage supply.
-
-Examples:
-spi_controller {
-	mcp3x0x@0 {
-		compatible = "microchip,mcp3002";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		vref-supply = <&vref_reg>;
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/mcp3422.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
deleted file mode 100644
index 82bcce07255d..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC)
-
-Required properties:
- - compatible: Should be
-	"microchip,mcp3421" or
-	"microchip,mcp3422" or
-	"microchip,mcp3423" or
-	"microchip,mcp3424" or
-	"microchip,mcp3425" or
-	"microchip,mcp3426" or
-	"microchip,mcp3427" or
-	"microchip,mcp3428"
- - reg: I2C address for the device
-
-Example:
-adc@0 {
-	compatible = "microchip,mcp3424";
-	reg = <0x68>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
new file mode 100644
index 000000000000..cbbac4ce56d6
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp3201 and similar ADCs
+
+maintainers:
+  - Oskar Andero <oskar.andero@gmail.com>
+
+description: |
+   Family of simple ADCs with an I2C inteface.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3001
+      - microchip,mcp3002
+      - microchip,mcp3004
+      - microchip,mcp3008
+      - microchip,mcp3201
+      - microchip,mcp3202
+      - microchip,mcp3204
+      - microchip,mcp3208
+      - microchip,mcp3301
+      - microchip,mcp3550-50
+      - microchip,mcp3550-60
+      - microchip,mcp3551
+      - microchip,mcp3553
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+  spi-cpha: true
+  spi-cpol: true
+
+  vref-supply:
+    description: External reference.
+
+  "#io-channel-cells":
+    const: 1
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3002";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            #io-channel-cells = <1>;
+        };
+        adc@1 {
+            compatible = "microchip,mcp3002";
+            reg = <1>;
+            vref-supply = <&vref_reg>;
+            spi-max-frequency = <1500000>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
new file mode 100644
index 000000000000..a6cb857a232d
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC ADC binding
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC
+  has ADCs that are used for battery charging and USB PHY VBUS and ID pin
+  detection.
+
+properties:
+  compatible:
+    enum:
+      - motorola,cpcap-adc
+      - motorola,mapphone-cpcap-adc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: adcdone
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc {
+            compatible = "motorola,mapphone-cpcap-adc";
+            interrupt-parent = <&cpcap>;
+            interrupts = <8 IRQ_TYPE_NONE>;
+            interrupt-names = "adcdone";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml
new file mode 100644
index 000000000000..04566ff02eb6
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,nau7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NAU7802 I2c Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: nuvoton,nau7802
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,vldo:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Internal reference voltage in millivolts to be configured.
+    minimum: 2400
+    maximum: 4500
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nau7802@2a {
+            compatible = "nuvoton,nau7802";
+            reg = <0x2a>;
+            nuvoton,vldo = <3000>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
deleted file mode 100644
index ef8eeec1a997..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Nuvoton NPCM Analog to Digital Converter (ADC)
-
-The NPCM ADC is a 10-bit converter for eight channel inputs.
-
-Required properties:
-- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC.
-- reg: specifies physical base address and size of the registers.
-- interrupts: Contain the ADC interrupt with flags for falling edge.
-- resets : phandle to the reset control for this device.
-
-Optional properties:
-- clocks: phandle of ADC reference clock, in case the clock is not
-		  added the ADC will use the default ADC sample rate.
-- vref-supply: The regulator supply ADC reference voltage, in case the
-			   vref-supply is not added the ADC will use internal voltage
-			   reference.
-
-Example:
-
-adc: adc@f000c000 {
-	compatible = "nuvoton,npcm750-adc";
-	reg = <0xf000c000 0x8>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clk NPCM7XX_CLK_ADC>;
-	resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
new file mode 100644
index 000000000000..001cf263b7d5
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,npcm750-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM BMC Analog to Digital Converter (ADC)
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The NPCM ADC is a 10-bit converter for eight channel inputs.
+
+properties:
+  compatible:
+    const: nuvoton,npcm750-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: ADC interrupt, should be set for falling edge.
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: If not provided the defulat ADC sample rate will be used.
+
+  vref-supply:
+    description: If not supplied, the internal voltage reference will be used.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@f000c000 {
+            compatible = "nuvoton,npcm750-adc";
+            reg = <0xf000c000 0x8>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk NPCM7XX_CLK_ADC>;
+            resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
deleted file mode 100644
index e9582e6fe350..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Nuvoton NAU7802 Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "nuvoton,nau7802"
-  - reg: Should contain the ADC I2C address
-
-Optional properties:
-  - nuvoton,vldo: Internal reference voltage in millivolts to be
-    configured valid values are between 2400 mV and 4500 mV.
-  - interrupts: IRQ line for the ADC. If not used the driver will use
-    polling.
-
-Example:
-adc2: nau7802@2a {
-	compatible = "nuvoton,nau7802";
-	reg = <0x2a>;
-	nuvoton,vldo = <3000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
new file mode 100644
index 000000000000..6404fb73f8ed
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 ADC bindings
+
+maintainers:
+  - Joachim Eastwood <manabian@gmail.com>
+
+description:
+  Supports the ADC found on the LPC1850 SoC.
+
+properties:
+  compatible:
+    const: nxp,lpc1850-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vref-supply: true
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@400e3000 {
+            compatible = "nxp,lpc1850-adc";
+            reg = <0x400e3000 0x1000>;
+            interrupts = <17>;
+            clocks = <&ccu1 CLK_APB3_ADC0>;
+            vref-supply = <&reg_vdda>;
+            resets = <&rgu 40>;
+         };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
new file mode 100644
index 000000000000..2c5032be83bd
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,lpc3220-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 SoC ADC controller
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description:
+  This hardware block has been used on several LPC32XX SoCs.
+
+properties:
+  compatible:
+    const: nxp,lpc3220-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@40048000 {
+            compatible = "nxp,lpc3220-adc";
+            reg = <0x40048000 0x1000>;
+            interrupt-parent = <&mic>;
+            interrupts = <39 0>;
+            vref-supply = <&vcc>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 0ca992465a21..7f4f827c57a7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -48,6 +48,8 @@ properties:
     description:
       End of conversion interrupt.
 
+  io-channel-ranges: true
+
 required:
   - compatible
   - reg
@@ -232,6 +234,8 @@ allOf:
               enum: [ 1, 2, 4, 8, 16 ]
               default: 1
 
+additionalProperties: false
+
 examples:
   - |
     spmi_bus {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index cc3c8ea6a894..5ebb0ab250bd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -41,11 +41,16 @@ properties:
     maxItems: 2
 
   interrupts:
-    maxItems: 1
+    description:
+      ADC interrupt followed by optional touchscreen interrupt.
+    minItems: 1
+    maxItems: 2
 
   "#io-channel-cells":
     const: 1
 
+  io-channel-ranges: true
+
   vdd-supply: true
 
   samsung,syscon-phandle:
@@ -68,6 +73,9 @@ required:
   - "#io-channel-cells"
   - vdd-supply
 
+additionalProperties:
+  type: object
+
 allOf:
   - if:
       properties:
@@ -78,7 +86,6 @@ allOf:
               - samsung,exynos-adc-v2
               - samsung,exynos3250-adc
               - samsung,exynos4212-adc
-              - samsung,s5pv210-adc
     then:
       required:
         - samsung,syscon-phandle
@@ -107,6 +114,15 @@ allOf:
           items:
             - const: adc
 
+  - if:
+      required:
+        - has-touchscreen
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
 examples:
   - |
     adc: adc@12d10000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
new file mode 100644
index 000000000000..caa3ee0b4b8c
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX series PMICs ADC binding
+
+maintainers:
+  - Baolin Wang <baolin.wang7@gmail.com>
+
+description:
+  Supports the ADC found on these PMICs.
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-adc
+      - sprd,sc2721-adc
+      - sprd,sc2723-adc
+      - sprd,sc2730-adc
+      - sprd,sc2731-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  hwlocks:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 2
+
+  nvmem-cell-names:
+    items:
+      - const: big_scale_calib
+      - const: small_scale_calib
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#io-channel-cells"
+  - hwlocks
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@480 {
+            compatible = "sprd,sc2731-adc";
+            reg = <0x480>;
+            interrupt-parent = <&sc2731_pmic>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            #io-channel-cells = <1>;
+            hwlocks = <&hwlock 4>;
+            nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+            nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
deleted file mode 100644
index b4daa15dcf15..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Spreadtrum SC27XX series PMICs ADC binding
-
-Required properties:
-- compatible: Should be one of the following.
-	"sprd,sc2720-adc"
-	"sprd,sc2721-adc"
-	"sprd,sc2723-adc"
-	"sprd,sc2730-adc"
-	"sprd,sc2731-adc"
-- reg: The address offset of ADC controller.
-- interrupt-parent: The interrupt controller.
-- interrupts: The interrupt number for the ADC device.
-- #io-channel-cells: Number of cells in an IIO specifier.
-- hwlocks: Reference to a phandle of a hwlock provider node.
-- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
-- nvmem-cell-names: Should be "big_scale_calib", "small_scale_calib".
-
-Example:
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic_adc: adc@480 {
-			compatible = "sprd,sc2731-adc";
-			reg = <0x480>;
-			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-			#io-channel-cells = <1>;
-			hwlocks = <&hwlock 4>;
-			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
-			nvmem-cell-names = "big_scale_calib", "small_scale_calib";
-		};
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
new file mode 100644
index 000000000000..9049c699152f
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,stmpe-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC on an STMPE multifunction device.
+
+maintainers:
+  - Stefan Agner <stefan@agner.ch>
+
+description:
+  This ADC forms part of an ST microelectronics STMPE multifunction device .
+  The ADC is shared with the STMPE touchscreen. As a result some ADC related
+  settings are specified in the parent node.
+  The node name myst be stmpe_adc and should be a child node of the stmpe node
+  to which it belongs.
+
+properties:
+  compatible:
+    const: st,stmpe-adc
+
+  st,norequest-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask specifying which ADC channels should _not_ be
+      requestable due to different usage (e.g. touch).
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    stmpe {
+        stmpe_adc {
+            compatible = "st,stmpe-adc";
+            st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
deleted file mode 100644
index 480e66422625..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-STMPE ADC driver
-----------------
-
-Required properties:
- - compatible: "st,stmpe-adc"
-
-Optional properties:
-Note that the ADC is shared with the STMPE touchscreen. ADC related settings
-have to be done in the mfd.
-- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
-  requestable due to different usage (e.g. touch)
-
-Node name must be stmpe_adc and should be child node of stmpe node to
-which it belongs.
-
-Example:
-
-	stmpe_adc {
-		compatible = "st,stmpe-adc";
-		st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
new file mode 100644
index 000000000000..f5a923cc847f
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc0832.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC0832 and similar ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+  8 bit ADCs with 1, 2, 4 or 8 inputs for single ended or differential
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc0831
+      - ti,adc0832
+      - ti,adc0834
+      - ti,adc0838
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc0832";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <200000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
new file mode 100644
index 000000000000..54955f03df93
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc108s102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC108S102 and ADC128S102
+
+maintainers:
+  - Bogdan Pricop <bogdan.pricop@emutex.com>
+
+description: |
+  Family of 8 channel, 10/12 bit, SPI, single ended ADCs.
+
+properties:
+  compatible:
+    const:
+      ti,adc108s102
+
+  reg: true
+  vref-supply: true
+  spi-max-frequency: true
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells= <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc108s102";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
new file mode 100644
index 000000000000..ec3b2edf1fb7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc12138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC12138 and similar self-calibrating ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+  13 bit ADCs with 1, 2 or 8 inputs and self calibrating circuitry to
+  correct for linearity, zero and full scale errors.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc12130
+      - ti,adc12132
+      - ti,adc12138
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: End of Conversion (EOC) interrupt
+
+  clocks:
+    maxItems: 1
+    description: Conversion clock input.
+
+  spi-max-frequency: true
+
+  vref-p-supply:
+    description: The regulator supply for positive analog voltage reference
+
+  vref-n-supply:
+    description: |
+      The regulator supply for negative analog voltage reference
+      (Note that this must not go below GND or exceed vref-p)
+      If not specified, this is assumed to be analog ground.
+
+  ti,acquisition-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 6, 10, 18, 34 ]
+    description: |
+      The number of conversion clock periods for the S/H's acquisition time.
+      For high source impedances, this value can be increased to 18 or 34.
+      For less ADC accuracy and/or slower CCLK frequencies this value may be
+      decreased to 6.  See section 6.0 INPUT SOURCE RESISTANCE in the
+      datasheet for details.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-p-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc12138";
+            reg = <0>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio1>;
+            clocks = <&cclk>;
+            vref-p-supply = <&ldo4_reg>;
+            spi-max-frequency = <5000000>;
+            ti,acquisition-time = <6>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
new file mode 100644
index 000000000000..d54a0183f024
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc128s052.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128S052 and similar ADCs
+
+maintainers:
+  - Angelo Compagnucci <angelo.compagnucci@gmail.com>
+
+description: |
+  Family of 12 bit SPI ADCs with 2 to 8 channels with a range of different
+  target sample rates.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc122s021
+      - ti,adc122s051
+      - ti,adc122s101
+      - ti,adc124s021
+      - ti,adc124s051
+      - ti,adc124s101
+      - ti,adc128s052
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc128s052";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
new file mode 100644
index 000000000000..3f4f334d6f73
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc161s626.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC141S626 and ADC161S626 ADCs
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Single channel 14/16bit differential ADCs
+
+properties:
+  compatible:
+    enum:
+      - ti,adc141s626
+      - ti,adc161s626
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vdda-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc161s626";
+            vdda-supply = <&vdda_fixed>;
+            reg = <0>;
+            spi-max-frequency = <4300000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
new file mode 100644
index 000000000000..2c2d01bbc296
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS1015 4 channel I2C analog to digital converter
+
+maintainers:
+  - Daniel Baluta <daniel.baluta@nxp.com>
+
+description: |
+  Datasheet at: https://www.ti.com/lit/gpn/ads1015
+  Supports both single ended and differential channels.
+
+properties:
+  compatible:
+    const: ti,ads1015
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@[0-7]+$":
+    type: object
+    description:
+      Child nodes needed for each channel that the platform uses.
+
+    properties:
+      reg:
+        description: |
+          0: Voltage over AIN0 and AIN1.
+          1: Voltage over AIN0 and AIN3.
+          2: Voltage over AIN1 and AIN3.
+          3: Voltage over AIN2 and AIN3.
+          4: Voltage over AIN0 and GND.
+          5: Voltage over AIN1 and GND.
+          6: Voltage over AIN2 and GND.
+          7: Voltage over AIN3 and GND.
+        items:
+          - minimum: 0
+            maximum: 7
+
+      ti,gain:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 5
+        description: |
+          pga is the programmable gain amplifier (values are full scale)
+          0: +/- 6.144 V
+          1: +/- 4.096 V
+          2: +/- 2.048 V (default)
+          3: +/- 1.024 V
+          4: +/- 0.512 V
+          5: +/- 0.256 V
+
+      ti,datarate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+        description: |
+          Data acquisition rate in samples per second
+          0: 128
+          1: 250
+          2: 490
+          3: 920
+          4: 1600 (default)
+          5: 2400
+          6: 3300
+
+    required:
+      - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@49 {
+            compatible = "ti,ads1015";
+            reg = <0x49>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+              reg = <0>;
+            };
+            channel@4 {
+              reg = <4>;
+              ti,gain = <3>;
+              ti,datarate = <5>;
+            };
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml
new file mode 100644
index 000000000000..5ab5027be97e
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7950 and similar ADCs
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description: |
+  Family of 4-16 channel, 8-12 bit ADCs with SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7950
+      - ti,ads7951
+      - ti,ads7952
+      - ti,ads7953
+      - ti,ads7954
+      - ti,ads7955
+      - ti,ads7956
+      - ti,ads7957
+      - ti,ads7958
+      - ti,ads7959
+      - ti,ads7960
+      - ti,ads7961
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  vref-supply:
+    description: Supplies the 2.5V or 5V reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads7957";
+            reg = <0>;
+            vref-supply = <&refin_supply>;
+            spi-max-frequency = <10000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
new file mode 100644
index 000000000000..b8c398187d5c
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads8344.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS8344 ADC
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: |
+  16bit 8-channel ADC with single ended inputs.
+
+properties:
+  compatible:
+    const: ti,ads8344
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vref-supply:
+    description: Supply the 2.5V or 5V reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads8344";
+            reg = <0>;
+            vref-supply = <&refin_supply>;
+            spi-max-frequency = <10000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index 97fe6cbb2efa..a0af4b24877f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -25,10 +25,14 @@ properties:
     description: Optional external reference.  If not supplied, assume
       REFSEL input tied low to enable the internal reference.
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
new file mode 100644
index 000000000000..6c2539b3d707
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,tlc4541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLC4541 and similar ADCs
+
+maintainers:
+  - Phil Reid <preid@electromag.com.au>
+
+description: |
+  14/16bit single channel ADC with SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - ti,tlc3541
+      - ti,tlc4541
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,tlc4541";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <200000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml
new file mode 100644
index 000000000000..6781ad2f0f51
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,twl4030-madc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MADC subsystem in the TWL4030 power module
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  The MADC subsystem in the TWL4030 consists of a 10-bit ADC
+  combined with a 16-input analog multiplexer.
+
+properties:
+  compatible:
+    const: ti,twl4030-madc
+
+  interrupts:
+    maxItems: 1
+
+  ti,system-uses-second-madc-irq:
+    type: boolean
+    description:
+      Set if the second madc irq register should be used, which is intended
+      to be used  by Co-Processors (e.g. a modem).
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    twl {
+        madc {
+            compatible = "ti,twl4030-madc";
+            interrupts = <3>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt
deleted file mode 100644
index d91130587d01..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Texas Instruments' ADC0831/ADC0832/ADC0832/ADC0838
-
-Required properties:
- - compatible: Should be one of
-	* "ti,adc0831"
-	* "ti,adc0832"
-	* "ti,adc0834"
-	* "ti,adc0838"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
- - spi-max-frequency: Max SPI frequency to use (< 400000)
-
-Example:
-adc@0 {
-	compatible = "ti,adc0832";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <200000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
deleted file mode 100644
index bbbbb4a9f58f..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Texas Instruments' ADC108S102 and ADC128S102 ADC chip
-
-Required properties:
- - compatible: Should be "ti,adc108s102"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,adc108s102";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
deleted file mode 100644
index 049a1d36f013..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Texas Instruments' ADC12130/ADC12132/ADC12138
-
-Required properties:
- - compatible: Should be one of
-	* "ti,adc12130"
-	* "ti,adc12132"
-	* "ti,adc12138"
- - reg: SPI chip select number for the device
- - interrupts: Should contain interrupt for EOC (end of conversion)
- - clocks: phandle to conversion clock input
- - spi-max-frequency: Definision as per
-	Documentation/devicetree/bindings/spi/spi-bus.txt
- - vref-p-supply: The regulator supply for positive analog voltage reference
-
-Optional properties:
- - vref-n-supply: The regulator supply for negative analog voltage reference
-	(Note that this must not go below GND or exceed vref-p)
-	If not specified, this is assumed to be analog ground.
- - ti,acquisition-time: The number of conversion clock periods for the S/H's
-	acquisition time.  Should be one of 6, 10, 18, 34.  If not specified,
-	default value of 10 is used.
-	For high source impedances, this value can be increased to 18 or 34.
-	For less ADC accuracy and/or slower CCLK frequencies this value may be
-	decreased to 6.  See section 6.0 INPUT SOURCE RESISTANCE in the
-	datasheet for details.
-
-Example:
-adc@0 {
-	compatible = "ti,adc12138";
-	reg = <0>;
-	interrupts = <28 IRQ_TYPE_EDGE_RISING>;
-	interrupt-parent = <&gpio1>;
-	clocks = <&cclk>;
-	vref-p-supply = <&ldo4_reg>;
-	spi-max-frequency = <5000000>;
-	ti,acquisition-time = <6>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
deleted file mode 100644
index c07ce1a3f5c4..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip
-
-Required properties:
- - compatible: Should be one of:
-   - "ti,adc128s052"
-   - "ti,adc122s021"
-   - "ti,adc122s051"
-   - "ti,adc122s101"
-   - "ti,adc124s021"
-   - "ti,adc124s051"
-   - "ti,adc124s101"
- - reg: spi chip select number for the device
- - vref-supply: The regulator supply for ADC reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,adc128s052";
-	reg = <0>;
-	vref-supply = <&vdd_supply>;
-	spi-max-frequency = <1000000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
deleted file mode 100644
index 3d25011f0c99..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Texas Instruments ADC141S626 and ADC161S626 chips
-
-Required properties:
- - compatible: Should be "ti,adc141s626" or "ti,adc161s626"
- - reg: spi chip select number for the device
- - vdda-supply: supply voltage to VDDA pin
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,adc161s626";
-	vdda-supply = <&vdda_fixed>;
-	reg = <0>;
-	spi-max-frequency = <4300000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
deleted file mode 100644
index e77a6f7e1001..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Texas Instruments ADS7950 family of A/DC chips
-
-Required properties:
- - compatible: Must be one of "ti,ads7950", "ti,ads7951", "ti,ads7952",
-   "ti,ads7953", "ti,ads7954", "ti,ads7955", "ti,ads7956", "ti,ads7957",
-   "ti,ads7958", "ti,ads7959", "ti,ads7960", or "ti,ads7961"
- - reg: SPI chip select number for the device
- - #io-channel-cells: Must be 1 as per ../iio-bindings.txt
- - vref-supply: phandle to a regulator node that supplies the 2.5V or 5V
-   reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,ads7957";
-	reg = <0>;
-	#io-channel-cells = <1>;
-	vref-supply = <&refin_supply>;
-	spi-max-frequency = <10000000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
deleted file mode 100644
index e47c3759a82b..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Texas Instruments ADS8344 A/DC chip
-
-Required properties:
- - compatible: Must be "ti,ads8344"
- - reg: SPI chip select number for the device
- - vref-supply: phandle to a regulator node that supplies the
-   reference voltage
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-		Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "ti,ads8344";
-	reg = <0>;
-	vref-supply = <&refin_supply>;
-	spi-max-frequency = <10000000>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt
deleted file mode 100644
index 6bdd21404b57..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* TWL4030 Monitoring Analog to Digital Converter (MADC)
-
-The MADC subsystem in the TWL4030 consists of a 10-bit ADC
-combined with a 16-input analog multiplexer.
-
-Required properties:
-  - compatible: Should contain "ti,twl4030-madc".
-  - interrupts: IRQ line for the MADC submodule.
-  - #io-channel-cells: Should be set to <1>.
-
-Optional properties:
-  - ti,system-uses-second-madc-irq: boolean, set if the second madc irq register
-				    should be used, which is intended to be used
-				    by Co-Processors (e.g. a modem).
-
-Example:
-
-&twl {
-	madc {
-		compatible = "ti,twl4030-madc";
-		interrupts = <3>;
-		#io-channel-cells = <1>;
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
deleted file mode 100644
index 1aad0514e647..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Freescale vf610 Analog to Digital Converter bindings
-
-The devicetree bindings are for the new ADC driver written for
-vf610/i.MX6slx and upward SoCs from Freescale.
-
-Required properties:
-- compatible: Should contain "fsl,vf610-adc"
-- reg: Offset and length of the register set for the device
-- interrupts: Should contain the interrupt for the device
-- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock.
-- clock-names: Must contain "adc", matching entry in the clocks property.
-- vref-supply: The regulator supply ADC reference voltage.
-
-Recommended properties:
-- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating
-  requirements. Three values are required, depending on conversion mode:
-  - Frequency in normal mode (ADLPC=0, ADHSC=0)
-  - Frequency in high-speed mode (ADLPC=0, ADHSC=1)
-  - Frequency in low-power mode (ADLPC=1, ADHSC=0)
-- min-sample-time: Minimum sampling time in nanoseconds. This value has
-  to be chosen according to the conversion mode and the connected analog
-  source resistance (R_as) and capacitance (C_as). Refer the datasheet's
-  operating requirements. A safe default across a wide range of R_as and
-  C_as as well as conversion modes is 1000ns.
-
-Example:
-adc0: adc@4003b000 {
-	compatible = "fsl,vf610-adc";
-	reg = <0x4003b000 0x1000>;
-	interrupts = <0 53 0x04>;
-	clocks = <&clks VF610_CLK_ADC0>;
-	clock-names = "adc";
-	fsl,adck-max-frequency = <30000000>, <40000000>,
-				<20000000>;
-	vref-supply = <&reg_vcc_3v3_mcu>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 5342360e96b1..a557761d8016 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -33,6 +33,8 @@ required:
   - compatible
   - ctrl-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
index 9a89b34bdd8f..4646deeb6f7b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
@@ -19,6 +19,8 @@ description: |
     http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
     http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf
     http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf
+    https://www.atlas-scientific.com/files/EZO_O2_datasheet.pdf
+    https://www.atlas-scientific.com/files/EZO_HUM_Datasheet.pdf
 
 properties:
   compatible:
@@ -29,6 +31,8 @@ properties:
       - atlas,ph-sm
       - atlas,rtd-sm
       - atlas,co2-ezo
+      - atlas,o2-ezo
+      - atlas,hum-ezo
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/common.yaml
index 97ffcb77043d..f845b41d74c4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/common.yaml
@@ -32,4 +32,6 @@ properties:
       considered 'near' to the device (an object is near to the
       sensor).
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index 82424e06be27..fb2c48fc7ce4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -49,6 +49,14 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
+  spi-max-frequency: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   channel@0:
     description: Represents an external channel which are
       connected to the DAC. Channel 0 can act both as a current
@@ -130,6 +138,8 @@ required:
   - channel@4
   - channel@5
 
+additionalProperties: false
+
 examples:
   - |
         spi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
new file mode 100644
index 000000000000..edf804d0aca2
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Linear Technology LTC2632/2634/2636 DAC
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2632-l12
+      - lltc,ltc2632-l10
+      - lltc,ltc2632-l8
+      - lltc,ltc2632-h12
+      - lltc,ltc2632-h10
+      - lltc,ltc2632-h8
+      - lltc,ltc2634-l12
+      - lltc,ltc2634-l10
+      - lltc,ltc2634-l8
+      - lltc,ltc2634-h12
+      - lltc,ltc2634-h10
+      - lltc,ltc2634-h8
+      - lltc,ltc2636-l12
+      - lltc,ltc2636-l10
+      - lltc,ltc2636-l8
+      - lltc,ltc2636-h12
+      - lltc,ltc2636-h10
+      - lltc,ltc2636-h8
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  vref-supply:
+    description:
+      Phandle to the external reference voltage supply. This should
+      only be set if there is an external reference voltage connected to the VREF
+      pin. If the property is not set the internal reference is used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    vref: regulator-vref {
+        compatible = "regulator-fixed";
+        regulator-name = "vref-ltc2632";
+        regulator-min-microvolt = <1250000>;
+        regulator-max-microvolt = <1250000>;
+        regulator-always-on;
+    };
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@0 {
+        compatible = "lltc,ltc2632";
+        reg = <0>;    /* CS0 */
+        spi-max-frequency = <1000000>;
+        vref-supply = <&vref>;
+      };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/dac/ltc2632.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
deleted file mode 100644
index 1ab9570cf219..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Linear Technology LTC2632/2634/2636 DAC
-
-Required properties:
- - compatible: Has to contain one of the following:
-	lltc,ltc2632-l12
-	lltc,ltc2632-l10
-	lltc,ltc2632-l8
-	lltc,ltc2632-h12
-	lltc,ltc2632-h10
-	lltc,ltc2632-h8
-	lltc,ltc2634-l12
-	lltc,ltc2634-l10
-	lltc,ltc2634-l8
-	lltc,ltc2634-h12
-	lltc,ltc2634-h10
-	lltc,ltc2634-h8
-	lltc,ltc2636-l12
-	lltc,ltc2636-l10
-	lltc,ltc2636-l8
-	lltc,ltc2636-h12
-	lltc,ltc2636-h10
-	lltc,ltc2636-h8
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Optional properties:
-	- vref-supply: Phandle to the external reference voltage supply. This should
-	  only be set if there is an external reference voltage connected to the VREF
-	  pin. If the property is not set the internal reference is used.
-
-Example:
-
-	vref: regulator-vref {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-ltc2632";
-		regulator-min-microvolt = <1250000>;
-		regulator-max-microvolt = <1250000>;
-		regulator-always-on;
-	};
-
-	spi_master {
-		dac: ltc2632@0 {
-			compatible = "lltc,ltc2632-l12";
-			reg = <0>; /* CS0 */
-			spi-max-frequency = <1000000>;
-			vref-supply = <&vref>; /* optional */
-		};
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 7ec3ec94356b..6b3a611e1cf1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -40,12 +40,16 @@ properties:
       output stage will shut down until the ADF4371/ADF4372 achieves lock as
       measured by the digital lock detect circuitry.
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     spi0 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
new file mode 100644
index 000000000000..662ec59ca0af
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/adi,adxrs290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope
+
+maintainers:
+  - Nishant Malpani <nish.malpani25@gmail.com>
+
+description: |
+  Bindings for the Analog Devices ADXRS290 dual-axis MEMS gyroscope device.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf
+
+properties:
+  compatible:
+    const: adi,adxrs290
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - spi-cpha
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyro@0 {
+                   compatible = "adi,adxrs290";
+                   reg = <0>;
+                   spi-max-frequency = <5000000>;
+                   spi-cpol;
+                   spi-cpha;
+                   interrupt-parent = <&gpio>;
+                   interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
new file mode 100644
index 000000000000..7037f82ec753
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC2010/HDC2080 humidity and temperature iio sensors
+
+maintainers:
+  - Eugene Zaikonnikov <ez@norophonic.com>
+
+description: |
+  Relative humidity and tempereature sensors on I2C bus
+
+  Datasheets are available at:
+    http://www.ti.com/product/HDC2010/datasheet
+    http://www.ti.com/product/HDC2080/datasheet
+
+properties:
+  compatible:
+    enum:
+      - ti,hdc2010
+      - ti,hdc2080
+
+  vdd-supply:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      humidity@40 {
+          compatible = "ti,hdc2010";
+          reg = <0x40>;
+      };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 0c53009ba7d6..340be256f283 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,6 +25,8 @@ properties:
 
   spi-cpol: true
 
+  spi-max-frequency: true
+
   interrupts:
     maxItems: 1
 
@@ -33,6 +35,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index 208faaffa58d..79fba1508e89 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -116,6 +116,8 @@ allOf:
       dependencies:
         adi,sync-mode: [ clocks ]
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 33d8e9fd14b7..6e73cd889b5c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,10 +46,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     // Example for I2C
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index abd8d25e1136..4c1c083d0e92 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -47,11 +47,17 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
+  spi-max-frequency: true
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 63bcb73ae309..479e7065d4eb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -36,10 +36,14 @@ properties:
   drive-open-drain:
     type: boolean
 
+  spi-max-frequency: true
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
new file mode 100644
index 000000000000..0e8cd02759b3
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+
+maintainers:
+  - Christian Eggers <ceggers@arri.de>
+
+description: |
+  XYZ True Color Sensor with I2C Interface
+  https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+
+properties:
+  compatible:
+    enum:
+      - ams,as73211
+
+  reg:
+    description:
+      I2C address of the device (0x74...0x77).
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt specifier for the READY interrupt generated by the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        as73211@74 {
+            compatible = "ams,as73211";
+            reg = <0x74>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_color_sensor>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */
+        };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
index e201a06d8fdc..60e76bc035a5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
index f671edda6641..a3a979553e32 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
@@ -26,6 +26,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
index 497300239d93..8249be99cff9 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
@@ -26,6 +26,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
index 12aa16f24772..f8a932be0d10 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
@@ -61,6 +61,8 @@ required:
   - sharp,proximity-far-hysteresis
   - sharp,proximity-close-hysteresis
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
index 58887a4f9c15..4d1a225e8868 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -24,6 +24,10 @@ properties:
       - vishay,vcnl4020
       - vishay,vcnl4040
       - vishay,vcnl4200
+
+  interrupts:
+    maxItems: 1
+
   reg:
     maxItems: 1
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
index f0b336ac39c9..a25590a16ba7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -55,6 +55,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
new file mode 100644
index 000000000000..5739074d3592
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9310 capacitive proximity sensor
+
+maintainers:
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9310/SX9311 capacitive proximity/button solution.
+
+  Specifications about the devices can be found at:
+  https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx9310
+      - semtech,sx9311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The sole interrupt generated by the device used to announce the
+      preceding reading request has finished and that data is
+      available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9310";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+      };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
index 51dba64037f6..fbd3a2e32280 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
@@ -47,6 +47,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
index aac5f621f8dc..dfe00eb961cd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
@@ -4,9 +4,15 @@ Required properties:
 	- compatible: must be "st,vl53l0x"
 	- reg: i2c address where to find the device
 
+Optional properties:
+	- interrupts:	Interrupt for notifying that new measurement is ready.
+			If no interrupt is specified, polling is used.
+
 Example:
 
 vl53l0x@29 {
 	compatible = "st,vl53l0x";
 	reg = <0x29>;
+	interrupt-parent = <&gpio>;
+	interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
 };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/adc-joystick.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/adc-joystick.yaml
new file mode 100644
index 000000000000..054406bbd22b
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC attached joystick
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Bindings for joystick devices connected to ADC controllers supporting
+  the Industrial I/O subsystem.
+
+properties:
+  compatible:
+    const: adc-joystick
+
+  io-channels:
+    minItems: 1
+    maxItems: 1024
+    description: >
+      List of phandle and IIO specifier pairs.
+      Each pair defines one ADC channel to which a joystick axis is connected.
+      See Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - io-channels
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+  "^axis@[0-9a-f]+$":
+    type: object
+    description: >
+      Represents a joystick axis bound to the given ADC channel.
+      For each entry in the io-channels list, one axis subnode with a matching
+      reg property must be specified.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of an io-channels list entry bound to this axis.
+
+      linux,code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: EV_ABS specific event code generated by the axis.
+
+      abs-range:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - items:
+              - description: minimum value
+              - description: maximum value
+        description: >
+          Minimum and maximum values produced by the axis.
+          For an ABS_X axis this will be the left-most and right-most
+          inclination of the joystick. If min > max, it is left to userspace to
+          treat the axis as inverted.
+          This property is interpreted as two signed 32 bit values.
+
+      abs-fuzz:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Amount of noise in the input value.
+          Omitting this property indicates the axis is precise.
+
+      abs-flat:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Axial "deadzone", or area around the center position, where the axis
+          is considered to be at rest.
+          Omitting this property indicates the axis always returns to exactly
+          the center position.
+
+    required:
+      - reg
+      - linux,code
+      - abs-range
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+    #include <dt-bindings/input/input.h>
+
+    joystick: adc-joystick {
+      compatible = "adc-joystick";
+      io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+                    <&adc INGENIC_ADC_TOUCH_YP>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      axis@0 {
+              reg = <0>;
+              linux,code = <ABS_X>;
+              abs-range = <3300 0>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+      axis@1 {
+              reg = <1>;
+              linux,code = <ABS_Y>;
+              abs-range = <0 3300>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/cros-ec-keyb.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
deleted file mode 100644
index 0f6355ce39b5..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-ChromeOS EC Keyboard
-
-Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on
-a separate EC (Embedded Controller) device. It provides a message for reading
-key scans from the EC. These are then converted into keycodes for processing
-by the kernel.
-
-This binding is based on matrix-keymap.txt and extends/modifies it as follows:
-
-Required properties:
-- compatible: "google,cros-ec-keyb"
-
-Optional properties:
-- google,needs-ghost-filter: True to enable a ghost filter for the matrix
-keyboard. This is recommended if the EC does not have its own logic or
-hardware for this.
-
-
-Example:
-
-cros-ec-keyb {
-	compatible = "google,cros-ec-keyb";
-	keypad,num-rows = <8>;
-	keypad,num-columns = <13>;
-	google,needs-ghost-filter;
-	/*
-	 * Keymap entries take the form of 0xRRCCKKKK where
-	 * RR=Row CC=Column KKKK=Key Code
-	 * The values below are for a US keyboard layout and
-	 * are taken from the Linux driver. Note that the
-	 * 102ND key is not used for US keyboards.
-	 */
-	linux,keymap = <
-		/* CAPSLCK F1         B          F10     */
-		0x0001003a 0x0002003b 0x00030030 0x00040044
-		/* N       =          R_ALT      ESC     */
-		0x00060031 0x0008000d 0x000a0064 0x01010001
-		/* F4      G          F7         H       */
-		0x0102003e 0x01030022 0x01040041 0x01060023
-		/* '       F9         BKSPACE    L_CTRL  */
-		0x01080028 0x01090043 0x010b000e 0x0200001d
-		/* TAB     F3         T          F6      */
-		0x0201000f 0x0202003d 0x02030014 0x02040040
-		/* ]       Y          102ND      [       */
-		0x0205001b 0x02060015 0x02070056 0x0208001a
-		/* F8      GRAVE      F2         5       */
-		0x02090042 0x03010029 0x0302003c 0x03030006
-		/* F5      6          -          \       */
-		0x0304003f 0x03060007 0x0308000c 0x030b002b
-		/* R_CTRL  A          D          F       */
-		0x04000061 0x0401001e 0x04020020 0x04030021
-		/* S       K          J          ;       */
-		0x0404001f 0x04050025 0x04060024 0x04080027
-		/* L       ENTER      Z          C       */
-		0x04090026 0x040b001c 0x0501002c 0x0502002e
-		/* V       X          ,          M       */
-		0x0503002f 0x0504002d 0x05050033 0x05060032
-		/* L_SHIFT /          .          SPACE   */
-		0x0507002a 0x05080035 0x05090034 0x050B0039
-		/* 1       3          4          2       */
-		0x06010002 0x06020004 0x06030005 0x06040003
-		/* 8       7          0          9       */
-		0x06050009 0x06060008 0x0608000b 0x0609000a
-		/* L_ALT   DOWN       RIGHT      Q       */
-		0x060a0038 0x060b006c 0x060c006a 0x07010010
-		/* E       R          W          I       */
-		0x07020012 0x07030013 0x07040011 0x07050017
-		/* U       R_SHIFT    P          O       */
-		0x07060016 0x07070036 0x07080019 0x07090018
-		/* UP      LEFT    */
-		0x070b0067 0x070c0069>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 5b37be0be4e9..378a85c09d34 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -48,6 +48,8 @@ required:
   - vdd-supply
   - linux,keycodes
 
+unevaluatedProperties: false
+
 examples:
   - |
     // Example with interrupts
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
new file mode 100644
index 000000000000..8e50c14a9d77
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/google,cros-ec-keyb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC Keyboard
+
+maintainers:
+  - Simon Glass <sjg@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  Google's ChromeOS EC Keyboard is a simple matrix keyboard
+  implemented on a separate EC (Embedded Controller) device. It provides
+  a message for reading key scans from the EC. These are then converted
+  into keycodes for processing by the kernel.
+
+allOf:
+  - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+properties:
+  compatible:
+    const: google,cros-ec-keyb
+
+  google,needs-ghost-filter:
+    description:
+      Enable a ghost filter for the matrix keyboard. This is recommended
+      if the EC does not have its own logic or hardware for this.
+    type: boolean
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    cros-ec-keyb {
+        compatible = "google,cros-ec-keyb";
+        keypad,num-rows = <8>;
+        keypad,num-columns = <13>;
+        google,needs-ghost-filter;
+        /*
+         * Keymap entries take the form of 0xRRCCKKKK where
+         * RR=Row CC=Column KKKK=Key Code
+         * The values below are for a US keyboard layout and
+         * are taken from the Linux driver. Note that the
+         * 102ND key is not used for US keyboards.
+         */
+        linux,keymap = <
+            /* CAPSLCK F1         B          F10     */
+            0x0001003a 0x0002003b 0x00030030 0x00040044
+            /* N       =          R_ALT      ESC     */
+            0x00060031 0x0008000d 0x000a0064 0x01010001
+            /* F4      G          F7         H       */
+            0x0102003e 0x01030022 0x01040041 0x01060023
+            /* '       F9         BKSPACE    L_CTRL  */
+            0x01080028 0x01090043 0x010b000e 0x0200001d
+            /* TAB     F3         T          F6      */
+            0x0201000f 0x0202003d 0x02030014 0x02040040
+            /* ]       Y          102ND      [       */
+            0x0205001b 0x02060015 0x02070056 0x0208001a
+            /* F8      GRAVE      F2         5       */
+            0x02090042 0x03010029 0x0302003c 0x03030006
+            /* F5      6          -          \       */
+            0x0304003f 0x03060007 0x0308000c 0x030b002b
+            /* R_CTRL  A          D          F       */
+            0x04000061 0x0401001e 0x04020020 0x04030021
+            /* S       K          J          ;       */
+            0x0404001f 0x04050025 0x04060024 0x04080027
+            /* L       ENTER      Z          C       */
+            0x04090026 0x040b001c 0x0501002c 0x0502002e
+            /* V       X          ,          M       */
+            0x0503002f 0x0504002d 0x05050033 0x05060032
+            /* L_SHIFT /          .          SPACE   */
+            0x0507002a 0x05080035 0x05090034 0x050B0039
+            /* 1       3          4          2       */
+            0x06010002 0x06020004 0x06030005 0x06040003
+            /* 8       7          0          9       */
+            0x06050009 0x06060008 0x0608000b 0x0609000a
+            /* L_ALT   DOWN       RIGHT      Q       */
+            0x060a0038 0x060b006c 0x060c006a 0x07010010
+            /* E       R          W          I       */
+            0x07020012 0x07030013 0x07040011 0x07050017
+            /* U       R_SHIFT    P          O       */
+            0x07060016 0x07070036 0x07080019 0x07090018
+            /* UP      LEFT    */
+            0x070b0067 0x070c0069>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/input.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/input.yaml
index 8edcb3c31270..ab407f266bef 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/input.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/input.yaml
@@ -33,3 +33,5 @@ properties:
       power off automatically. Device with key pressed shutdown feature can
       specify this property.
     $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/matrix-keymap.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/matrix-keymap.yaml
index c3bf09156783..6699d5e32dca 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/matrix-keymap.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/matrix-keymap.yaml
@@ -35,6 +35,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of column lines connected to the keypad controller.
 
+additionalProperties: true
+
 examples:
   - |
     keypad {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
index 36dc7b56a453..a771a15f053f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -81,3 +81,5 @@ dependencies:
   touchscreen-size-y: [ touchscreen-size-x ]
   touchscreen-x-mm: [ touchscreen-y-mm ]
   touchscreen-y-mm: [ touchscreen-x-mm ]
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
new file mode 100644
index 000000000000..446efb9f5f55
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
@@ -0,0 +1,40 @@
+Device tree bindings for Zinitx BT541 touchscreen controller
+
+Required properties:
+
+ - compatible		: Should be "zinitix,bt541"
+ - reg			: I2C address of the chip. Should be 0x20
+ - interrupts		: Interrupt to which the chip is connected
+
+Optional properties:
+
+ - vdd-supply		: Analog power supply regulator on VCCA pin
+ - vddo-supply		: Digital power supply regulator on VDD pin
+ - zinitix,mode		: Mode of reporting touch points. Some modes may not work
+			  with a particular ts firmware for unknown reasons. Available
+			  modes are 1 and 2. Mode 2 is the default and preferred.
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		bt541@20 {
+			compatible = "zinitix,bt541";
+			reg = <0x20>;
+			interrupt-parent = <&msmgpio>;
+			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tsp_default>;
+			vdd-supply = <&reg_vdd_tsp>;
+			vddo-supply = <&pm8916_l6>;
+			touchscreen-size-x = <540>;
+			touchscreen-size-y = <960>;
+			zinitix,mode = <2>;
+		};
+
+		/* ... */
+	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/interconnect.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/interconnect.txt
index 6f5d23a605b7..138c544c8c8c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/interconnect.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -19,7 +19,8 @@ directly.
 Required properties:
 - compatible : contains the interconnect provider compatible string
 - #interconnect-cells : number of cells in a interconnect specifier needed to
-			encode the interconnect node id
+			encode the interconnect node id and optionally add a
+			path tag
 
 Example:
 
@@ -44,6 +45,10 @@ components it has to interact with.
 Required properties:
 interconnects : Pairs of phandles and interconnect provider specifier to denote
 	        the edge source and destination ports of the interconnect path.
+		An optional path tag value could specified as additional argument
+		to both endpoints and in such cases, this information will be passed
+		to the interconnect framework to do aggregation based on the attached
+		tag.
 
 Optional properties:
 interconnect-names : List of interconnect path name strings sorted in the same
@@ -62,3 +67,20 @@ Example:
 		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
 		interconnect-names = "sdhc-mem";
 	};
+
+Example with path tags:
+
+	gnoc: interconnect@17900000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	mnoc: interconnect@1380000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	cpu@0 {
+		...
+		interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>;
+	}
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
index 5971fc1df08d..e23df4836c6f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -21,6 +21,23 @@ properties:
     enum:
       - qcom,bcm-voter
 
+  qcom,tcs-wait:
+    description: |
+      Optional mask of which TCSs (Triggered Command Sets) wait for completion
+      upon triggering. If not specified, then the AMC and WAKE sets wait for
+      completion. The mask bits are available in the QCOM_ICC_TAG_* defines.
+
+      The AMC TCS is triggered immediately when icc_set_bw() is called. The
+      WAKE/SLEEP TCSs are triggered when the RSC transitions between active and
+      sleep modes.
+
+      In most cases, it's necessary to wait in both the AMC and WAKE sets to
+      ensure resources are available before use. If a specific RSC and its use
+      cases can ensure sufficient delay by other means, then this can be
+      overridden to reduce latencies.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+
 required:
   - compatible
 
@@ -39,7 +56,10 @@ examples:
   # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
   - |
 
+    #include <dt-bindings/interconnect/qcom,icc.h>
+
     disp_bcm_voter: bcm_voter {
         compatible = "qcom,bcm-voter";
+        qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
     };
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index 91f70c9067d1..d6a95c3cb26f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -19,6 +19,8 @@ properties:
     enum:
       - qcom,sc7180-osm-l3
       - qcom,sdm845-osm-l3
+      - qcom,sm8150-osm-l3
+      - qcom,sm8250-epss-l3
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
similarity index 60%
rename from Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
rename to Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index dab17c0716ce..30c2a092d2d3 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -1,16 +1,17 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm SDM845 Network-On-Chip Interconnect
+title: Qualcomm RPMh Network-On-Chip Interconnect
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
+  - Odelu Kukatla <okukatla@codeaurora.org>
 
 description: |
-   SDM845 interconnect providers support system bandwidth requirements through
+   RPMh interconnect providers support system bandwidth requirements through
    RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
    able to communicate with the BCM through the Resource State Coordinator (RSC)
    associated with each execution environment. Provider nodes must point to at
@@ -23,6 +24,19 @@ properties:
 
   compatible:
     enum:
+      - qcom,sc7180-aggre1-noc
+      - qcom,sc7180-aggre2-noc
+      - qcom,sc7180-camnoc-virt
+      - qcom,sc7180-compute-noc
+      - qcom,sc7180-config-noc
+      - qcom,sc7180-dc-noc
+      - qcom,sc7180-gem-noc
+      - qcom,sc7180-ipa-virt
+      - qcom,sc7180-mc-virt
+      - qcom,sc7180-mmss-noc
+      - qcom,sc7180-npu-noc
+      - qcom,sc7180-qup-virt
+      - qcom,sc7180-system-noc
       - qcom,sdm845-aggre1-noc
       - qcom,sdm845-aggre2-noc
       - qcom,sdm845-config-noc
@@ -31,6 +45,28 @@ properties:
       - qcom,sdm845-mem-noc
       - qcom,sdm845-mmss-noc
       - qcom,sdm845-system-noc
+      - qcom,sm8150-aggre1-noc
+      - qcom,sm8150-aggre2-noc
+      - qcom,sm8150-camnoc-noc
+      - qcom,sm8150-compute-noc
+      - qcom,sm8150-config-noc
+      - qcom,sm8150-dc-noc
+      - qcom,sm8150-gem-noc
+      - qcom,sm8150-ipa-virt
+      - qcom,sm8150-mc-virt
+      - qcom,sm8150-mmss-noc
+      - qcom,sm8150-system-noc
+      - qcom,sm8250-aggre1-noc
+      - qcom,sm8250-aggre2-noc
+      - qcom,sm8250-compute-noc
+      - qcom,sm8250-config-noc
+      - qcom,sm8250-dc-noc
+      - qcom,sm8250-gem-noc
+      - qcom,sm8250-ipa-virt
+      - qcom,sm8250-mc-virt
+      - qcom,sm8250-mmss-noc
+      - qcom,sm8250-npu-noc
+      - qcom,sm8250-system-noc
 
   '#interconnect-cells':
     const: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
deleted file mode 100644
index 8659048f92a7..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
+++ /dev/null
@@ -1,85 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SC7180 Network-On-Chip Interconnect
-
-maintainers:
-  - Odelu Kukatla <okukatla@codeaurora.org>
-
-description: |
-   SC7180 interconnect providers support system bandwidth requirements through
-   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
-   able to communicate with the BCM through the Resource State Coordinator (RSC)
-   associated with each execution environment. Provider nodes must point to at
-   least one RPMh device child node pertaining to their RSC and each provider
-   can map to multiple RPMh resources.
-
-properties:
-  reg:
-    maxItems: 1
-
-  compatible:
-    enum:
-      - qcom,sc7180-aggre1-noc
-      - qcom,sc7180-aggre2-noc
-      - qcom,sc7180-camnoc-virt
-      - qcom,sc7180-compute-noc
-      - qcom,sc7180-config-noc
-      - qcom,sc7180-dc-noc
-      - qcom,sc7180-gem-noc
-      - qcom,sc7180-ipa-virt
-      - qcom,sc7180-mc-virt
-      - qcom,sc7180-mmss-noc
-      - qcom,sc7180-npu-noc
-      - qcom,sc7180-qup-virt
-      - qcom,sc7180-system-noc
-
-  '#interconnect-cells':
-    const: 1
-
-  qcom,bcm-voters:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: |
-      List of phandles to qcom,bcm-voter nodes that are required by
-      this interconnect to send RPMh commands.
-
-  qcom,bcm-voter-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
-    description: |
-      Names for each of the qcom,bcm-voters specified.
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - qcom,bcm-voters
-
-additionalProperties: false
-
-examples:
-  - |
-      #include <dt-bindings/interconnect/qcom,sc7180.h>
-
-      config_noc: interconnect@1500000 {
-            compatible = "qcom,sc7180-config-noc";
-            reg = <0x01500000 0x28000>;
-            #interconnect-cells = <1>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
-      };
-
-      system_noc: interconnect@1620000 {
-            compatible = "qcom,sc7180-system-noc";
-            reg = <0x01620000 0x17080>;
-            #interconnect-cells = <1>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
-      };
-
-      mmss_noc: interconnect@1740000 {
-            compatible = "qcom,sc7180-mmss-noc";
-            reg = <0x01740000 0x1c100>;
-            #interconnect-cells = <1>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
-      };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
new file mode 100644
index 000000000000..5da333c644c9
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/actions,owl-sirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs SIRQ interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700
+  and S900) and provides support for handling up to 3 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-sirq
+      - actions,s700-sirq
+      - actions,s900-sirq
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number, between 0 and 2, while the second
+      cell is the trigger type as defined in interrupt.txt in this directory.
+
+  'interrupts':
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines.
+      They shall be specified sequentially from output 0 to 2.
+    minItems: 3
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - 'interrupts'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sirq: interrupt-controller@b01b0200 {
+      compatible = "actions,s500-sirq";
+      reg = <0xb01b0200 0x4>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 7cd6b8bacfa0..8acca0ae3129 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -29,10 +29,13 @@ properties:
       - items:
           - const: allwinner,sun8i-a83t-r-intc
           - const: allwinner,sun6i-a31-r-intc
-      - const: allwinner,sun9i-a80-sc-nmi
+      - const: allwinner,sun9i-a80-nmi
       - items:
           - const: allwinner,sun50i-a64-r-intc
           - const: allwinner,sun6i-a31-r-intc
+      - items:
+          - const: allwinner,sun50i-a100-nmi
+          - const: allwinner,sun9i-a80-nmi
       - items:
           - const: allwinner,sun50i-h6-r-intc
           - const: allwinner,sun6i-a31-r-intc
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
index 360a575ef8b0..3b11a1a15398 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -11,9 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8m-irqsteer
-      - fsl,imx-irqsteer
+    oneOf:
+      - const: fsl,imx-irqsteer
+      - items:
+          - const: fsl,imx8m-irqsteer
+          - const: fsl,imx-irqsteer
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt
deleted file mode 100644
index 42431f44697f..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-* Meta External Trigger Controller Binding
-
-This binding specifies what properties must be available in the device tree
-representation of a Meta external trigger controller.
-
-Required properties:
-
-    - compatible: Specifies the compatibility list for the interrupt controller.
-      The type shall be <string> and the value shall include "img,meta-intc".
-
-    - num-banks: Specifies the number of interrupt banks (each of which can
-      handle 32 interrupt sources).
-
-    - interrupt-controller: The presence of this property identifies the node
-      as an interrupt controller. No property value shall be defined.
-
-    - #interrupt-cells: Specifies the number of cells needed to encode an
-      interrupt source. The type shall be a <u32> and the value shall be 2.
-
-    - #address-cells: Specifies the number of cells needed to encode an
-      address. The type shall be <u32> and the value shall be 0. As such,
-      'interrupt-map' nodes do not have to specify a parent unit address.
-
-Optional properties:
-
-    - no-mask: The controller doesn't have any mask registers.
-
-* Interrupt Specifier Definition
-
-  Interrupt specifiers consists of 2 cells encoded as follows:
-
-    - <1st-cell>: The interrupt-number that identifies the interrupt source.
-
-    - <2nd-cell>: The Linux interrupt flags containing level-sense information,
-                  encoded as follows:
-                    1 = edge triggered
-                    4 = level-sensitive
-
-* Examples
-
-Example 1:
-
-	/*
-	 * Meta external trigger block
-	 */
-	intc: intc {
-		// This is an interrupt controller node.
-		interrupt-controller;
-
-		// No address cells so that 'interrupt-map' nodes which
-		// reference this interrupt controller node do not need a parent
-		// address specifier.
-		#address-cells = <0>;
-
-		// Two cells to encode interrupt sources.
-		#interrupt-cells = <2>;
-
-		// Number of interrupt banks
-		num-banks = <2>;
-
-		// No HWMASKEXT is available (specify on Chorus2 and Comet ES1)
-		no-mask;
-
-		// Compatible with Meta hardware trigger block.
-		compatible = "img,meta-intc";
-	};
-
-Example 2:
-
-	/*
-	 * An interrupt generating device that is wired to a Meta external
-	 * trigger block.
-	 */
-	uart1: uart@02004c00 {
-		// Interrupt source '5' that is level-sensitive.
-		// Note that there are only two cells as specified in the
-		// interrupt parent's '#interrupt-cells' property.
-		interrupts = <5 4 /* level */>;
-
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&intc>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
index 02a3cf470518..0a046be8d1cd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
@@ -49,6 +49,8 @@ required:
   - "#interrupt-cells"
   - interrupt-controller
 
+additionalProperties: false
+
 examples:
   - |
     intc: interrupt-controller@10001000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
new file mode 100644
index 000000000000..e8dfa6507f64
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The following interrupts are available. All types and levels are fixed
+  and handled by the board management controller.
+
+  ==== ============= ==================================
+   IRQ line/device   description
+  ==== ============= ==================================
+    0  RTC_INT#      Interrupt line from on-board RTC
+    1  SMB_ALERT#    Event on SMB_ALERT# line (P1)
+    2  ESPI_ALERT0#  Event on ESPI_ALERT0# line (S43)
+    3  ESPI_ALERT1#  Event on ESPI_ALERT1# line (S44)
+    4  PWR_BTN#      Event on PWR_BTN# line (P128)
+    5  SLEEP#        Event on SLEEP# line (S149)
+    6  watchdog      Interrupt of the internal watchdog
+    7  n/a           not used
+  ==== ============= ==================================
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
index c8861cbbb8b5..d1d52d1db2be 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
@@ -41,6 +41,8 @@ required:
   - interrupt-controller
   - '#interrupt-cells'
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 03fc4f5b4b39..f38e0113f360 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -67,6 +67,8 @@ required:
   - 'loongson,parent_int_map'
 
 
+unevaluatedProperties: false
+
 examples:
   - |
     iointc: interrupt-controller@3ff01400 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
index 1b256d9dd92a..1f6fd73d4624 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
@@ -46,6 +46,8 @@ required:
   - loongson,msi-base-vec
   - loongson,msi-num-vecs
 
+additionalProperties: true #fixme
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
index a6dcbb2971a9..fdd6a38a31db 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
@@ -41,6 +41,8 @@ required:
   - interrupt-controller
   - '#interrupt-cells'
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
new file mode 100644
index 000000000000..bbf0f26cd008
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mstar,mst-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Interrupt Controller
+
+maintainers:
+  - Mark-PK Tsai <mark-pk.tsai@mediatek.com>
+
+description: |+
+  MStar, SigmaStar and Mediatek TV SoCs contain multiple legacy
+  interrupt controllers that routes interrupts to the GIC.
+
+  The HW block exposes a number of interrupt controllers, each
+  can support up to 64 interrupts.
+
+properties:
+  compatible:
+    const: mstar,mst-intc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      Use the same format as specified by GIC in arm,gic.yaml.
+
+  reg:
+    maxItems: 1
+
+  mstar,irqs-map-range:
+    description: |
+      The range <start, end> of parent interrupt controller's interrupt
+      lines that are hardwired to mstar interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  mstar,intc-no-eoi:
+    description:
+      Mark this controller has no End Of Interrupt(EOI) implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - mstar,irqs-map-range
+
+additionalProperties: false
+
+examples:
+  - |
+    mst_intc0: interrupt-controller@1f2032d0 {
+      compatible = "mstar,mst-intc";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      interrupt-parent = <&gic>;
+      reg = <0x1f2032d0 0x30>;
+      mstar,irqs-map-range = <0 63>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
index ce6aaff15214..039e08af98bb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -95,7 +95,7 @@ properties:
 
     additionalProperties: false
 
-unevaluatedProperties: false
+additionalProperties: false
 
 required:
   - compatible
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
deleted file mode 100644
index 6adf7a6e8825..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-SiFive Platform-Level Interrupt Controller (PLIC)
--------------------------------------------------
-
-SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
-(PLIC) high-level specification in the RISC-V Privileged Architecture
-specification.  The PLIC connects all external interrupts in the system to all
-hart contexts in the system, via the external interrupt source in each hart.
-
-A hart context is a privilege mode in a hardware execution thread.  For example,
-in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
-privilege modes per hart; machine mode and supervisor mode.
-
-Each interrupt can be enabled on per-context basis.  Any context can claim
-a pending enabled interrupt and then release it once it has been handled.
-
-Each interrupt has a configurable priority.  Higher priority interrupts are
-serviced first.  Each context can specify a priority threshold. Interrupts
-with priority below this threshold will not cause the PLIC to raise its
-interrupt line leading to the context.
-
-While the PLIC supports both edge-triggered and level-triggered interrupts,
-interrupt handlers are oblivious to this distinction and therefore it is not
-specified in the PLIC device-tree binding.
-
-While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
-"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
-contains a specific memory layout, which is documented in chapter 8 of the
-SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
-
-Required properties:
-- compatible : "sifive,plic-1.0.0" and a string identifying the actual
-  detailed implementation in case that specific bugs need to be worked around.
-- #address-cells : should be <0> or more.
-- #interrupt-cells : should be <1> or more.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- reg : Should contain 1 register range (address and length).
-- interrupts-extended : Specifies which contexts are connected to the PLIC,
-  with "-1" specifying that a context is not present.  Each node pointed
-  to should be a riscv,cpu-intc node, which has a riscv node as parent.
-- riscv,ndev: Specifies how many external interrupts are supported by
-  this controller.
-
-Example:
-
-	plic: interrupt-controller@c000000 {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic";
-		interrupt-controller;
-		interrupts-extended = <
-			&cpu0-intc 11
-			&cpu1-intc 11 &cpu1-intc 9
-			&cpu2-intc 11 &cpu2-intc 9
-			&cpu3-intc 11 &cpu3-intc 9
-			&cpu4-intc 11 &cpu4-intc 9>;
-		reg = <0xc000000 0x4000000>;
-		riscv,ndev = <10>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
new file mode 100644
index 000000000000..b9a61c9f7530
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Platform-Level Interrupt Controller (PLIC)
+
+description:
+  SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
+  (PLIC) high-level specification in the RISC-V Privileged Architecture
+  specification. The PLIC connects all external interrupts in the system to all
+  hart contexts in the system, via the external interrupt source in each hart.
+
+  A hart context is a privilege mode in a hardware execution thread. For example,
+  in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+  privilege modes per hart; machine mode and supervisor mode.
+
+  Each interrupt can be enabled on per-context basis. Any context can claim
+  a pending enabled interrupt and then release it once it has been handled.
+
+  Each interrupt has a configurable priority. Higher priority interrupts are
+  serviced first.  Each context can specify a priority threshold. Interrupts
+  with priority below this threshold will not cause the PLIC to raise its
+  interrupt line leading to the context.
+
+  While the PLIC supports both edge-triggered and level-triggered interrupts,
+  interrupt handlers are oblivious to this distinction and therefore it is not
+  specified in the PLIC device-tree binding.
+
+  While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+  "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
+  contains a specific memory layout, which is documented in chapter 8 of the
+  SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@dabbelt.com>
+
+properties:
+  compatible:
+    items:
+      - const: sifive,fu540-c000-plic
+      - const: sifive,plic-1.0.0
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 0
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts-extended:
+    minItems: 1
+    description:
+      Specifies which contexts are connected to the PLIC, with "-1" specifying
+      that a context is not present. Each node pointed to should be a
+      riscv,cpu-intc node, which has a riscv node as parent.
+
+  riscv,ndev:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      Specifies how many external interrupts are supported by this controller.
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - interrupts-extended
+  - riscv,ndev
+
+additionalProperties: false
+
+examples:
+  - |
+    plic: interrupt-controller@c000000 {
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+      interrupt-controller;
+      interrupts-extended = <
+        &cpu0_intc 11
+        &cpu1_intc 11 &cpu1_intc 9
+        &cpu2_intc 11 &cpu2_intc 9
+        &cpu3_intc 11 &cpu3_intc 9
+        &cpu4_intc 11 &cpu4_intc 9>;
+      reg = <0xc000000 0x4000000>;
+      riscv,ndev = <10>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
index 086ff08322db..2db59df9408f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -2,7 +2,8 @@ Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
 
 Synopsys DesignWare provides interrupt controller IP for APB known as
 dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500.
+APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
+controller in some SoCs, e.g. Hisilicon SD5203.
 
 Required properties:
 - compatible: shall be "snps,dw-apb-ictl"
@@ -10,6 +11,8 @@ Required properties:
   region starting with ENABLE_LOW register
 - interrupt-controller: identifies the node as an interrupt controller
 - #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+
+Additional required property when it's used as secondary interrupt controller:
 - interrupts: interrupt reference to primary interrupt controller
 
 The interrupt sources map to the corresponding bits in the interrupt
@@ -21,6 +24,7 @@ registers, i.e.
 - (optional) fast interrupts start at 64.
 
 Example:
+	/* dw_apb_ictl is used as secondary interrupt controller */
 	aic: interrupt-controller@3000 {
 		compatible = "snps,dw-apb-ictl";
 		reg = <0x3000 0xc00>;
@@ -29,3 +33,11 @@ Example:
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	/* dw_apb_ictl is used as primary interrupt controller */
+	vic: interrupt-controller@10130000 {
+		compatible = "snps,dw-apb-ictl";
+		reg = <0x10130000 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
new file mode 100644
index 000000000000..1c4c009dedd0
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PRU-ICSS Local Interrupt Controller
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  Each PRU-ICSS has a single interrupt controller instance that is common
+  to all the PRU cores. Most interrupt controllers can route 64 input events
+  which are then mapped to 10 possible output interrupts through two levels
+  of mapping. The input events can be triggered by either the PRUs and/or
+  various other PRUSS internal and external peripherals. The first 2 output
+  interrupts (0, 1) are fed exclusively to the internal PRU cores, with the
+  remaining 8 (2 through 9) connected to external interrupt controllers
+  including the MPU and/or other PRUSS instances, DSPs or devices.
+
+  The property "ti,irqs-reserved" is used for denoting the connection
+  differences on the output interrupts 2 through 9. If this property is not
+  defined, it implies that all the PRUSS INTC output interrupts 2 through 9
+  (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt
+  controller.
+
+  The K3 family of SoCs can handle 160 input events that can be mapped to 20
+  different possible output interrupts. The additional output interrupts (10
+  through 19) are connected to new sub-modules within the ICSSG instances.
+
+  This interrupt-controller node should be defined as a child node of the
+  corresponding PRUSS node. The node should be named "interrupt-controller".
+
+properties:
+  compatible:
+    enum:
+      - ti,pruss-intc
+      - ti,icssg-intc
+    description: |
+      Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs,
+                              AM335x family of SoCs,
+                              AM437x family of SoCs,
+                              AM57xx family of SoCs
+                              66AK2G family of SoCs
+      Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: |
+      All the interrupts generated towards the main host processor in the SoC.
+      A shared interrupt can be skipped if the desired destination and usage is
+      by a different processor/device.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      pattern: host_intr[0-7]
+    description: |
+      Should use one of the above names for each valid host event interrupt
+      connected to Arm interrupt controller, the name should match the
+      corresponding host event interrupt number.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      Client users shall use the PRU System event number (the interrupt source
+      that the client is interested in) [cell 1], PRU channel [cell 2] and PRU
+      host_event (target) [cell 3] as the value of the interrupts property in
+      their node.  The system events can be mapped to some output host
+      interrupts through 2 levels of many-to-one mapping i.e. events to channel
+      mapping and channels to host interrupts so through this property entire
+      mapping is provided.
+
+  ti,irqs-reserved:
+    $ref: /schemas/types.yaml#definitions/uint8
+    description: |
+      Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
+      output interrupts 2 through 9) that are not connected to the Arm interrupt
+      controller or are shared and used by other devices or processors in the
+      SoC. Define this property when any of 8 interrupts should not be handled
+      by Arm interrupt controller.
+        Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt
+              connected to MPU
+            - AM65x and J721E SoCs have "host_intr5", "host_intr6" and
+              "host_intr7" interrupts connected to MPU, and other ICSSG
+              instances.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM33xx PRU-ICSS */
+    pruss: pruss@0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupts = <20 21 22 23 24 25 26 27>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr5",
+                              "host_intr6", "host_intr7";
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+  - |
+
+    /* AM4376 PRU-ICSS */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pruss@0 {
+        compatible = "ti,am4376-pruss";
+        reg = <0x0 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4",
+                              "host_intr6", "host_intr7";
+            ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index c7cd05656a3e..b5af12011499 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -32,6 +32,11 @@ description: |
                        | | vint  | bit  |  | 0 |.....|63| vintx  |
                        | +--------------+  +------------+        |
                        |                                         |
+                       |      Unmap                              |
+                       | +--------------+                        |
+  Unmapped events ---->| |   umapidx    |-------------------------> Globalevents
+                       | +--------------+                        |
+                       |                                         |
                        +-----------------------------------------+
 
   Configuration of these Intmap registers that maps global events to vint is
@@ -70,6 +75,11 @@ properties:
         - description: |
             "limit" specifies the limit for translation
 
+  ti,unmapped-event-sources:
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    description:
+      Array of phandles to DMA controllers where the unmapped events originate.
+
 required:
   - compatible
   - reg
@@ -79,6 +89,8 @@ required:
   - ti,sci-dev-id
   - ti,interrupt-ranges
 
+unevaluatedProperties: false
+
 examples:
   - |
     bus {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
index cff6a956afb4..e12aee42b126 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -88,6 +88,8 @@ required:
   - ti,sci-dev-id
   - ti,interrupt-ranges
 
+unevaluatedProperties: false
+
 examples:
   - |
     main_gpio_intr: interrupt-controller0 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
index c1ccd8582eb2..ac949f7fe3d4 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
@@ -61,6 +61,7 @@ Required properties:
 	"mediatek,mt6779-m4u" for mt6779 which uses generation two m4u HW.
 	"mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
 						     generation one m4u HW.
+	"mediatek,mt8167-m4u" for mt8167 which uses generation two m4u HW.
 	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
 	"mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW.
 - reg : m4u register base and size.
@@ -80,6 +81,7 @@ Required properties:
 	dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
 	dt-binding/memory/mt2712-larb-port.h for mt2712,
 	dt-binding/memory/mt6779-larb-port.h for mt6779,
+	dt-binding/memory/mt8167-larb-port.h for mt8167,
 	dt-binding/memory/mt8173-larb-port.h for mt8173, and
 	dt-binding/memory/mt8183-larb-port.h for mt8183.
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
index 6bfa090fd73a..cde1afa8dfd6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -20,6 +20,7 @@ properties:
       - items:
           - enum:
               - renesas,ipmmu-r8a73a4  # R-Mobile APE6
+              - renesas,ipmmu-r8a7742  # RZ/G1H
               - renesas,ipmmu-r8a7743  # RZ/G1M
               - renesas,ipmmu-r8a7744  # RZ/G1N
               - renesas,ipmmu-r8a7745  # RZ/G1E
@@ -32,8 +33,8 @@ properties:
           - enum:
               - renesas,ipmmu-r8a774a1 # RZ/G2M
               - renesas,ipmmu-r8a774b1 # RZ/G2N
-              - renesas,ipmmu-r8a774e1 # RZ/G2H
               - renesas,ipmmu-r8a774c0 # RZ/G2E
+              - renesas,ipmmu-r8a774e1 # RZ/G2H
               - renesas,ipmmu-r8a7795  # R-Car H3
               - renesas,ipmmu-r8a7796  # R-Car M3-W
               - renesas,ipmmu-r8a77961 # R-Car M3-W+
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
index 58fa76ee6176..898e3267893a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -49,6 +49,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     smic@fff3a000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/backlight/common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/backlight/common.yaml
new file mode 100644
index 000000000000..bc817f77d2b1
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common backlight properties
+
+maintainers:
+  - Lee Jones <lee.jones@linaro.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+description:
+  Backlight devices provide backlight for different types of graphical
+  displays. They are typically but not necessarily implemented using a white
+  LED powered by a boost converter.
+
+properties:
+  default-brightness:
+    description:
+      The default brightness that should be applied to the LED by the operating
+      system on start-up. The brightness should not exceed the brightness the
+      LED can provide.
+    $ref: /schemas/types.yaml#definitions/uint32
+
+  max-brightness:
+    description:
+      Normally the maximum brightness is determined by the hardware and this
+      property is not required. This property is used to put a software limit
+      on the brightness apart from what the driver says, as it could happen
+      that a LED can be made so bright that it gets damaged or causes damage
+      due to restrictions in a specific system, such as mounting conditions.
+    $ref: /schemas/types.yaml#definitions/uint32
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
new file mode 100644
index 000000000000..7a6ec1f8c0f3
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD253 one-wire backlight
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Kinetic Technologies KTD253 is a white LED backlight that is
+  controlled by a single GPIO line. If you just turn on the backlight
+  it goes to maximum backlight then you can set the level of backlight
+  using pulses on the enable wire. This is sometimes referred to as
+  "expresswire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd253
+
+  enable-gpios:
+    description: GPIO to use to enable/disable and dim the backlight.
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    backlight {
+        compatible = "kinetic,ktd253";
+        enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+        default-brightness = <13>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/common.yaml
index a2a541bca73c..f1211e7045f1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/common.yaml
@@ -43,7 +43,7 @@ properties:
       LED_COLOR_ID available, add a new one.
     $ref: /schemas/types.yaml#definitions/uint32
     minimum: 0
-    maximum: 8
+    maximum: 9
 
   function-enumerator:
     description:
@@ -156,6 +156,8 @@ properties:
       Maximum timeout in microseconds after which the flash LED is turned off.
       Required for flash LED nodes with configurable timeout.
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index b55e1f1308a4..37445c68cdef 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -16,7 +16,7 @@ description: |
   modules. This is achieved by adding multi-led nodes layer to the
   monochrome LED bindings.
   The nodes and properties defined in this document are unique to the multicolor
-  LED class.  Common LED nodes and properties are inherited from the common.txt
+  LED class.  Common LED nodes and properties are inherited from the common.yaml
   within this documentation directory.
 
 patternProperties:
@@ -25,13 +25,17 @@ patternProperties:
     description: Represents the LEDs that are to be grouped.
     properties:
       color:
-        const: 8  # LED_COLOR_ID_MULTI
         description: |
-          For multicolor LED support this property should be defined as
-          LED_COLOR_ID_MULTI which can be found in include/linux/leds/common.h.
+          For multicolor LED support this property should be defined as either
+          LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+          include/linux/leds/common.h.
+        enum: [ 8, 9 ]
 
     $ref: "common.yaml#"
 
     required:
       - color
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
index fc2603484544..676d43ec8169 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
@@ -16,6 +16,7 @@ Optional properties:
 - audio-gain-db : audio gain selection for external analog modulation input.
 	Valid values: 0 - 21, step by 3 (rounded down)
 	Default: 0
+- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
 
 Each led is represented as a sub-node of the issi,is31fl319x device.
 There can be less leds subnodes than the chip can support but not more.
@@ -44,6 +45,7 @@ fancy_leds: leds@65 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	reg = <0x65>;
+	shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
 
 	red_aux: led@1 {
 		label = "red:aux";
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
new file mode 100644
index 000000000000..c192b5feadc7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for LP50XX RGB LED from Texas Instruments.
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
+  a LED group or control them individually.
+
+  The difference in these RGB LED drivers is the number of supported RGB
+  modules.
+
+  For more product information please see the link below:
+  https://www.ti.com/lit/ds/symlink/lp5012.pdf
+  https://www.ti.com/lit/ds/symlink/lp5024.pdf
+  https://www.ti.com/lit/ds/symlink/lp5036.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lp5009
+      - ti,lp5012
+      - ti,lp5018
+      - ti,lp5024
+      - ti,lp5030
+      - ti,lp5036
+
+  reg:
+    maxItems: 1
+    description:
+      I2C slave address
+      lp5009/12 - 0x14, 0x15, 0x16, 0x17
+      lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
+      lp5030/36 - 0x30, 0x31, 0x32, 0x33
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+  vled-supply:
+    description: LED supply.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^multi-led@[0-9a-f]$':
+    type: object
+    allOf:
+      - $ref: leds-class-multicolor.yaml#
+    properties:
+      reg:
+        minItems: 1
+        maxItems: 12
+        description:
+          This property denotes the LED module number(s) that is used on the
+          for the child node.  The LED modules can either be used stand alone
+          or grouped into a module bank.
+
+    patternProperties:
+      "(^led-[0-9a-f]$|led)":
+        type: object
+        $ref: common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   #include <dt-bindings/leds/common.h>
+
+   i2c {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       led-controller@14 {
+           compatible = "ti,lp5009";
+           reg = <0x14>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+           enable-gpios = <&gpio1 16>;
+
+           multi-led@1 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x1>;
+               color = <LED_COLOR_ID_RGB>;
+               function = LED_FUNCTION_CHARGING;
+
+               led-0 {
+                   color = <LED_COLOR_ID_RED>;
+               };
+
+               led-1 {
+                   color = <LED_COLOR_ID_GREEN>;
+               };
+
+               led-2 {
+                   color = <LED_COLOR_ID_BLUE>;
+               };
+          };
+
+          multi-led@2 {
+            #address-cells = <1>;
+            #size-cells = <2>;
+            reg = <0x2 0x3 0x5>;
+            color = <LED_COLOR_ID_RGB>;
+            function = LED_FUNCTION_STANDBY;
+
+            led-6 {
+              color = <LED_COLOR_ID_RED>;
+            };
+
+            led-7 {
+              color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led-8 {
+              color = <LED_COLOR_ID_BLUE>;
+            };
+         };
+       };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index b1bb3feb0f4d..58e974793a79 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -58,6 +58,12 @@ properties:
       - 2 # D1~6 with VOUT, D7~9 with VDD
       - 3 # D1~9 are connected to VOUT
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
 patternProperties:
   "(^led@[0-9a-f]$|led)":
     type: object
@@ -98,6 +104,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
    #include <dt-bindings/leds/common.h>
@@ -189,7 +197,7 @@ examples:
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0x2>;
-               color = <LED_COLOR_ID_MULTI>;
+               color = <LED_COLOR_ID_RGB>;
                function = LED_FUNCTION_STANDBY;
                linux,default-trigger = "heartbeat";
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-pca955x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-pca955x.txt
index 7a5830f8d5ab..817f460f3a72 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/leds-pca955x.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/leds-pca955x.txt
@@ -9,6 +9,7 @@ Required properties:
 	"nxp,pca9550"
 	"nxp,pca9551"
 	"nxp,pca9552"
+	"ibm,pca9552"
 	"nxp,pca9553"
 - #address-cells: must be 1
 - #size-cells: must be 0
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/tca6507.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/tca6507.txt
deleted file mode 100644
index bad9102796f3..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/tca6507.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-LEDs connected to tca6507
-
-Required properties:
-- compatible : should be : "ti,tca6507".
-- #address-cells: must be 1
-- #size-cells: must be 0
-- reg: typically 0x45.
-
-Optional properties:
-- gpio-controller: allows lines to be used as output-only GPIOs.
-- #gpio-cells: if present, must not be 0.
-
-Each led is represented as a sub-node of the ti,tca6507 device.
-
-LED sub-node properties:
-- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 6)
-- linux,default-trigger : (optional)
-   see Documentation/devicetree/bindings/leds/common.txt
-- compatible: either "led" (the default) or "gpio".
-
-Examples:
-
-tca6507@45 {
-	compatible = "ti,tca6507";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x45>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	led0: red-aux@0 {
-		label = "red:aux";
-		reg = <0x0>;
-	};
-
-	led1: green-aux@1 {
-		label = "green:aux";
-		reg = <0x5>;
-		linux,default-trigger = "default-on";
-	};
-
-	wifi-reset@6 {
-		reg = <0x6>;
-		compatible = "gpio";
-	};
-};
-
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/ti,tca6507.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
new file mode 100644
index 000000000000..94c307c98762
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,tca6507.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TCA6507 LED and GPIO controller
+
+maintainers:
+  - NeilBrown <neilb@suse.de>
+
+description:
+  The TCA6507 is a programmable LED controller connected via I2C that can drive
+  7 separate lines either by holding them low, or by pulsing them with modulated
+  width.
+
+properties:
+  compatible:
+    const: ti,tca6507
+
+  reg:
+    description: I2C slave address of the controller.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names: true
+
+patternProperties:
+  "^led@[0-6]$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+    required:
+      - reg
+
+  "^gpio@[0-6]$":
+    type: object
+
+    properties:
+      compatible:
+        const: gpio
+
+      reg:
+        minimum: 0
+        maximum: 6
+
+    additionalProperties: false
+
+    required:
+      - reg
+      - compatible
+
+if:
+  patternProperties:
+    "^gpio@[0-6]$":
+      properties:
+        compatible:
+          contains:
+            const: gpio
+then:
+  required:
+    - gpio-controller
+    - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@45 {
+            compatible = "ti,tca6507";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x45>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            gpio-line-names = "wifi_reset@6";
+
+            led@0 {
+                label = "gta04:red:aux";
+                reg = <0x0>;
+            };
+
+            led@1 {
+                label = "gta04:green:aux";
+                reg = <0x1>;
+            };
+
+            led@3 {
+                reg = <0x3>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "default-on";
+            };
+
+            led@4 {
+                color = <LED_COLOR_ID_GREEN>;
+                function = LED_FUNCTION_POWER;
+                reg = <0x4>;
+            };
+
+            gpio@6 {
+                compatible = "gpio";
+                reg = <0x6>;
+            };
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/trigger-source.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/trigger-source.yaml
index 0618003e40bd..89a1cde2b8aa 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/leds/trigger-source.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/leds/trigger-source.yaml
@@ -21,4 +21,6 @@ properties:
       trigger sources (e.g. a specific USB port).
     enum: [ 0, 1 ]
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
new file mode 100644
index 000000000000..d43791a2dde7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHU Mailbox Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+  The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3
+  independent channels/links to communicate with remote processor(s).  MHU links
+  are hardwired on a platform. A link raises interrupt for any received data.
+  However, there is no specified way of knowing if the sent data has been read
+  by the remote. This driver assumes the sender polls STAT register and the
+  remote clears it after having read the data.  The last channel is specified to
+  be a 'Secure' resource, hence can't be used by Linux running NS.
+
+  The MHU hardware also allows operations in doorbell mode. The MHU drives the
+  interrupt signal using a 32-bit register, with all 32-bits logically ORed
+  together. It provides a set of registers to enable software to set, clear and
+  check the status of each of the bits of this register independently. The use
+  of 32 bits per interrupt line enables software to provide more information
+  about the source of the interrupt. For example, each bit of the register can
+  be associated with a type of event that can contribute to raising the
+  interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote
+  processor.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,mhu
+          - arm,mhu-doorbell
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Data transfer mode
+        items:
+          - const: arm,mhu
+          - const: arm,primecell
+
+      - description: Doorbell mode
+        items:
+          - const: arm,mhu-doorbell
+          - const: arm,primecell
+
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: low-priority non-secure
+      - description: high-priority non-secure
+      - description: Secure
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  '#mbox-cells':
+    description: |
+      Set to 1 in data transfer mode and represents index of the channel.
+      Set to 2 in doorbell mode and represents index of the channel and doorbell
+      number.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  # Data transfer mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuA: mailbox@2b1f0000 {
+            #mbox-cells = <1>;
+            compatible = "arm,mhu", "arm,primecell";
+            reg = <0 0x2b1f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+
+        mhu_client_scb: scb@2e000000 {
+            compatible = "fujitsu,mb86s70-scb-1.0";
+            reg = <0 0x2e000000 0 0x4000>;
+            mboxes = <&mhuA 1>; /* HP-NonSecure */
+        };
+    };
+
+  # Doorbell mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuB: mailbox@2b2f0000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhu-doorbell", "arm,primecell";
+            reg = <0 0x2b2f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+
+        mhu_client_scpi: scpi@2f000000 {
+            compatible = "arm,scpi";
+            reg = <0 0x2f000000 0 0x200>;
+            mboxes = <&mhuB 1 4>; /* HP-NonSecure, 5th doorbell */
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/arm-mhu.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/arm-mhu.txt
deleted file mode 100644
index 4971f03f0b33..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/arm-mhu.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-ARM MHU Mailbox Driver
-======================
-
-The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has
-3 independent channels/links to communicate with remote processor(s).
- MHU links are hardwired on a platform. A link raises interrupt for any
-received data. However, there is no specified way of knowing if the sent
-data has been read by the remote. This driver assumes the sender polls
-STAT register and the remote clears it after having read the data.
-The last channel is specified to be a 'Secure' resource, hence can't be
-used by Linux running NS.
-
-Mailbox Device Node:
-====================
-
-Required properties:
---------------------
-- compatible:		Shall be "arm,mhu" & "arm,primecell"
-- reg:			Contains the mailbox register address range (base
-			address and length)
-- #mbox-cells		Shall be 1 - the index of the channel needed.
-- interrupts:		Contains the interrupt information corresponding to
-			each of the 3 links of MHU.
-
-Example:
---------
-
-	mhu: mailbox@2b1f0000 {
-		#mbox-cells = <1>;
-		compatible = "arm,mhu", "arm,primecell";
-		reg = <0 0x2b1f0000 0x1000>;
-		interrupts = <0 36 4>, /* LP-NonSecure */
-			     <0 35 4>, /* HP-NonSecure */
-			     <0 37 4>; /* Secure */
-		clocks = <&clock 0 2 1>;
-		clock-names = "apb_pclk";
-	};
-
-	mhu_client: scb@2e000000 {
-		compatible = "fujitsu,mb86s70-scb-1.0";
-		reg = <0 0x2e000000 0x4000>;
-		mboxes = <&mhu 1>; /* HP-NonSecure */
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
index 8a3470b64d06..15cef82cd356 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -38,8 +38,9 @@ properties:
           - const: fsl,imx6sx-mu
       - description: To communicate with i.MX8 SCU with fast IPC
         items:
-          - const: fsl,imx8qxp-mu
           - const: fsl,imx8-mu-scu
+          - const: fsl,imx8qxp-mu
+          - const: fsl,imx6sx-mu
 
   reg:
     maxItems: 1
@@ -71,6 +72,9 @@ properties:
     description: boolean, if present, means it is for side B MU.
     type: boolean
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/mtk-gce.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index cf48cd806e00..7771ecaac586 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -47,7 +47,7 @@ Example:
 		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&infracfg CLK_INFRA_GCE>;
 		clock-names = "gce";
-		#mbox-cells = <3>;
+		#mbox-cells = <2>;
 	};
 
 Example for a client device:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
index 35c3f56b7f7b..5fe80c1c19fc 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
@@ -69,7 +69,7 @@ The following are mandatory properties for the K3 AM65x and J721E SoCs only:
 			the interrupt routes between the IP and the main GIC
 			controllers. See the following binding for additional
 			details,
-			Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+			Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
 
 Child Nodes:
 ============
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 8f810fc5c183..ffd09b664ff5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -16,6 +16,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - qcom,ipq6018-apcs-apps-global
       - qcom,ipq8074-apcs-apps-global
       - qcom,msm8916-apcs-kpss-global
       - qcom,msm8994-apcs-kpss-global
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
index 7838804700d6..5fa19d4aeaf3 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -18,10 +18,13 @@ properties:
     oneOf:
       - const: allwinner,sun4i-a10-ir
       - const: allwinner,sun5i-a13-ir
+      - const: allwinner,sun6i-a31-ir
       - items:
           - const: allwinner,sun8i-a83t-ir
           - const: allwinner,sun6i-a31-ir
-      - const: allwinner,sun6i-a31-ir
+      - items:
+          - const: allwinner,sun8i-r40-ir
+          - const: allwinner,sun6i-a31-ir
       - items:
           - const: allwinner,sun50i-a64-ir
           - const: allwinner,sun6i-a31-ir
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
index 58261fb7b408..108bf435b933 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
@@ -7,6 +7,8 @@ Required properties:
 Optional properties:
 	- linux,rc-map-name: see rc.txt file in the same
 	  directory.
+	- linux,autosuspend-period: autosuspend delay time,
+	  the unit is milisecond.
 
 Example node:
 
@@ -14,4 +16,5 @@ Example node:
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 19 1>;
 		linux,rc-map-name = "rc-rc6-mce";
+		linux,autosuspend-period = <125>;
 	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
index daa2869377c5..63e5b89d2e0b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -49,6 +49,8 @@ required:
   - reg
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
index 107c862a7fc7..3dc06c628e64 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
@@ -119,6 +119,8 @@ required:
   - reg
   - port
 
+additionalProperties: false
+
 examples:
   - |
     i2c@e66d8000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/ov5647.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/ov5647.txt
deleted file mode 100644
index 22e44945b661..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/ov5647.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Omnivision OV5647 raw image sensor
----------------------------------
-
-OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible		: "ovti,ov5647".
-- reg			: I2C slave address of the sensor.
-- clocks		: Reference to the xclk clock.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The OV5647 device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Endpoint node mandatory properties:
-
-- remote-endpoint: A phandle to the bus receiver's endpoint node.
-
-Example:
-
-	i2c@2000 {
-		...
-		ov: camera@36 {
-			compatible = "ovti,ov5647";
-			reg = <0x36>;
-			clocks = <&camera_clk>;
-			port {
-				camera_1: endpoint {
-					remote-endpoint = <&csi1_ep1>;
-				};
-			};
-		};
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/ov5647.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
new file mode 100644
index 000000000000..280c62afae13
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov5647.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5647 raw image sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |-
+  The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data
+  interfaces and CCI (I2C compatible) control bus.
+
+properties:
+  compatible:
+    const: ovti,ov5647
+
+  reg:
+    description: I2C device address.
+    maxItems: 1
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  pwdn-gpios:
+    description: Reference to the GPIO connected to the pwdn pin. Active high.
+    maxItems: 1
+
+  port:
+    type: object
+    description: |-
+      Should contain one endpoint sub-node used to model connection to the
+      video receiver according to the specification defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          remote-endpoint:
+            description: |-
+              phandle to the video receiver input port.
+
+          clock-noncontinuous:
+            type: boolean
+            description: |-
+              Set to true to allow MIPI CSI-2 non-continuous clock operations.
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5647: camera@36 {
+            compatible = "ovti,ov5647";
+            reg = <0x36>;
+            clocks = <&camera_clk>;
+            pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+
+            port {
+                camera_out: endpoint {
+                    remote-endpoint = <&csi1_ep1>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/tvp5150.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
index 6c88ce858d08..719b2995dc17 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
@@ -56,7 +56,7 @@ Optional Connector Properties:
                   instead of using the autodetection mechnism. Please look at
                   [1] for more information.
 
-[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt.
+[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml.
 
 Example - three input sources:
 #include <dt-bindings/display/sdtv-standards.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
new file mode 100644
index 000000000000..736be7cad385
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
@@ -0,0 +1,35 @@
+* MediaTek JPEG Encoder
+
+MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+Required properties:
+- compatible : "mediatek,mt2701-jpgenc"
+  followed by "mediatek,mtk-jpgenc"
+- reg : physical base address of the JPEG encoder registers and length of
+  memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current SoCs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+
+Example:
+	jpegenc: jpegenc@1500a000 {
+		compatible = "mediatek,mt2701-jpgenc",
+			     "mediatek,mtk-jpgenc";
+		reg = <0 0x1500a000 0 0x1000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_VENC>;
+		clock-names = "jpgenc";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/mediatek-vcodec.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index b6b5dde6abd8..8217424fd4bd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -4,8 +4,9 @@ Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
 supports high resolution encoding and decoding functionalities.
 
 Required properties:
-- compatible : "mediatek,mt8173-vcodec-enc" for encoder
-  "mediatek,mt8173-vcodec-dec" for decoder.
+- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder
+  "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
+  "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
@@ -19,7 +20,9 @@ Required properties:
 - iommus : should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
-- mediatek,vpu : the node of video processor unit
+One of the two following nodes:
+- mediatek,vpu : the node of the video processor unit, if using VPU.
+- mediatek,scp : the node of the SCP unit, if using SCP.
 
 
 Example:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
index a2d1cd77c1e2..762be3f96ce9 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -55,6 +55,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/clock/imx8mq-clock.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
index f9606df02d70..59ab16ad12f1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
@@ -92,6 +92,8 @@ required:
   - video-decoder
   - video-encoder
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
index fa0dc6c47f1d..199f45217b4a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
@@ -119,6 +119,8 @@ required:
   - video-decoder
   - video-encoder
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
index 55f2d67ae34e..04013e5dd044 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -25,12 +25,16 @@ properties:
     maxItems: 1
 
   power-domains:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
 
   power-domain-names:
+    minItems: 2
+    maxItems: 3
     items:
       - const: venus
       - const: vcodec0
+      - const: cx
 
   clocks:
     maxItems: 5
@@ -108,6 +112,8 @@ required:
   - video-decoder
   - video-encoder
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
index 157dff8057e9..04b9af4db191 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -25,13 +25,17 @@ properties:
     maxItems: 1
 
   power-domains:
-    maxItems: 3
+    minItems: 3
+    maxItems: 4
 
   power-domain-names:
+    minItems: 3
+    maxItems: 4
     items:
       - const: venus
       - const: vcodec0
       - const: vcodec1
+      - const: cx
 
   clocks:
     maxItems: 7
@@ -103,6 +107,8 @@ required:
   - video-core0
   - video-core1
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
index 084e45e2df62..680f37726fdf 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
@@ -120,6 +120,8 @@ required:
   - video-core0
   - video-core1
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/rc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/rc.yaml
index ded2ac43237d..8ad2cba5f61f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/rc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/rc.yaml
@@ -150,3 +150,5 @@ properties:
       - rc-x96max
       - rc-xbox-dvd
       - rc-zx-irdec
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/renesas,csi2.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index 6d282585d0b9..533c2f181db7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -22,6 +22,7 @@ properties:
           - renesas,r8a774a1-csi2 # RZ/G2M
           - renesas,r8a774b1-csi2 # RZ/G2N
           - renesas,r8a774c0-csi2 # RZ/G2E
+          - renesas,r8a774e1-csi2 # RZ/G2H
           - renesas,r8a7795-csi2  # R-Car H3
           - renesas,r8a7796-csi2  # R-Car M3-W
           - renesas,r8a77965-csi2 # R-Car M3-N
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml
index 53c0a7238bac..ad2fe660364b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -24,6 +24,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - renesas,vin-r8a7742  # RZ/G1H
               - renesas,vin-r8a7743  # RZ/G1M
               - renesas,vin-r8a7744  # RZ/G1N
               - renesas,vin-r8a7745  # RZ/G1E
@@ -40,6 +41,7 @@ properties:
               - renesas,vin-r8a774a1 # RZ/G2M
               - renesas,vin-r8a774b1 # RZ/G2N
               - renesas,vin-r8a774c0 # RZ/G2E
+              - renesas,vin-r8a774e1 # RZ/G2H
               - renesas,vin-r8a7778  # R-Car M1
               - renesas,vin-r8a7779  # R-Car H1
               - renesas,vin-r8a7795  # R-Car H3
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/samsung-fimc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/samsung-fimc.txt
index f91b9dc80eb3..20447529c985 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -95,7 +95,7 @@ Optional properties:
 
 This node should contain child 'port' nodes specifying active parallel video
 input ports. It includes camera A and camera B inputs. 'reg' property in the
-port nodes specifies data input - 0, 1 indicates input A, B respectively.
+port nodes specifies data input - 1, 2 indicates input A, B respectively.
 
 Optional properties
 
@@ -172,8 +172,8 @@ Example:
 		/* parallel camera ports */
 		parallel-ports {
 			/* camera A input */
-			port@0 {
-				reg = <0>;
+			port@1 {
+				reg = <1>;
 				fimc0_ep: endpoint {
 					remote-endpoint = <&s5k6aa_ep>;
 					bus-width = <8>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
index 68484136a510..71547eee9919 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
@@ -33,6 +33,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/imx6qdl-clock.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index b64573680b42..dbafffe3f41e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -5,7 +5,7 @@ The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 Mediatek SMI have two generations of HW architecture, here is the list
 which generation the SoCs use:
 generation 1: mt2701 and mt7623.
-generation 2: mt2712, mt6779, mt8173 and mt8183.
+generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
 
 There's slight differences between the two SMI, for generation 2, the
 register which control the iommu port is at each larb's register base. But
@@ -20,6 +20,7 @@ Required properties:
 	"mediatek,mt2712-smi-common"
 	"mediatek,mt6779-smi-common"
 	"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
+	"mediatek,mt8167-smi-common"
 	"mediatek,mt8173-smi-common"
 	"mediatek,mt8183-smi-common"
 - reg : the register and size of the SMI block.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index 8f19dfe7d80e..0c5de12b5496 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -8,6 +8,7 @@ Required properties:
 		"mediatek,mt2712-smi-larb"
 		"mediatek,mt6779-smi-larb"
 		"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
+		"mediatek,mt8167-smi-larb"
 		"mediatek,mt8173-smi-larb"
 		"mediatek,mt8183-smi-larb"
 - reg : the register and size of this local arbiter.
@@ -22,7 +23,7 @@ Required properties:
   - "gals": the clock for GALS(Global Async Local Sync).
   Here is the list which has this GALS: mt8183.
 
-Required property for mt2701, mt2712, mt6779 and mt7623:
+Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
 - mediatek,larb-id :the hardware id of this larb.
 
 Example:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index 7bfe120e14c3..6d6ba608fd22 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -61,6 +61,8 @@ patternProperties:
           - cfi-flash
           - jedec,spi-nor
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/renesas-cpg-mssr.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 70eaf739036b..cba74205846a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -194,6 +194,8 @@ required:
   - clocks
   - ranges
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ab8500.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ab8500.txt
index 5c6eabeed341..d2a6e835c257 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -31,8 +31,8 @@ ab8500-btemp		 :			: vtvout       : Battery Temperature
 			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
 			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
 			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
-			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
-			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
+			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
+			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
 ab8500-charger		 :			: vddadc       : Charger interface
 			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)
 			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/act8945a.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/act8945a.txt
index e6f168db6c72..5ca75d888b4a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -71,7 +71,7 @@ Example:
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 			interrupt-parent = <&pioA>;
-			interrupts = <45 GPIO_ACTIVE_LOW>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
 
 			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
 			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
index 7a616577ac63..c00ad3e21c21 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -130,6 +130,14 @@ properties:
     type: object
     $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
 
+  lochnagar-hwmon:
+    type: object
+    $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+  lochnagar-sc:
+    type: object
+    $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
   VDDCORE:
     description:
       Initialisation data for the VDDCORE regulator, which supplies the
@@ -249,7 +257,7 @@ required:
   - lochnagar-clk
   - lochnagar-pinctrl
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
new file mode 100644
index 000000000000..08af356f5d27
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB3930 Embedded Controller bindings
+
+description: |
+  This binding describes the ENE KB3930 Embedded Controller attached to an
+  I2C bus.
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - dell,wyse-ariel-ec  # Dell Wyse Ariel board (3020)
+      - const: ene,kb3930
+  reg:
+    maxItems: 1
+
+  off-gpios:
+    description: GPIO used with the shutdown protocol on Ariel
+    maxItems: 2
+
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      embedded-controller@58 {
+        compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+        reg = <0x58>;
+        system-power-controller;
+
+        off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+                    <&gpio 127 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index 9b6eb50606e8..d08e8fe76446 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -144,9 +144,12 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -155,7 +158,7 @@ examples:
             compatible = "gw,gsc";
             reg = <0x20>;
             interrupt-parent = <&gpio1>;
-            interrupts = <4 GPIO_ACTIVE_LOW>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
             interrupt-controller;
             #interrupt-cells = <1>;
             #address-cells = <1>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 6a7279a85ec1..76bf16ee27ec 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -30,6 +30,11 @@ properties:
           For implementations of the EC is connected through RPMSG.
         const: google,cros-ec-rpmsg
 
+  controller-data:
+    description:
+      SPI controller data, see bindings/spi/spi-samsung.txt
+    type: object
+
   google,cros-ec-spi-pre-delay:
     description:
       This property specifies the delay in usecs between the
@@ -54,6 +59,14 @@ properties:
       whether this nvram is present or not.
     type: boolean
 
+  mtk,rpmsg-name:
+    description:
+      Must be defined if the cros-ec is a rpmsg device for a Mediatek
+      ARM Cortex M4 Co-processor. Contains the name pf the rpmsg
+      device. Used to match the subnode to the rpmsg device announced by
+      the SCP.
+    $ref: "/schemas/types.yaml#/definitions/string"
+
   spi-max-frequency:
     description: Maximum SPI frequency of the device in Hz.
 
@@ -63,6 +76,57 @@ properties:
   interrupts:
     maxItems: 1
 
+  wakeup-source:
+    description: Button can wake-up the system.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  typec:
+    $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
+
+  ec-pwm:
+    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+
+  keyboard-controller:
+    $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
+
+  codecs:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 2
+
+      '#size-cells':
+        const: 1
+
+    patternProperties:
+      "^ec-codec@[a-f0-9]+$":
+        type: object
+        $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^i2c-tunnel[0-9]*$":
+    type: object
+    $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
+
+  "^regulator@[0-9]+$":
+    type: object
+    $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
+
+  "^extcon[0-9]*$":
+    type: object
+    $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
+
 required:
   - compatible
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
new file mode 100644
index 000000000000..eb3b43547cb6
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  The board management controller may contain different IP blocks like
+  watchdog, fan monitoring, PWM controller, interrupt controller and a
+  GPIO controller.
+
+properties:
+  compatible:
+    const: kontron,sl28cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+  "^hwmon(@[0-9a-f]+)?$":
+    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+  "^interrupt-controller(@[0-9a-f]+)?$":
+    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+  "^pwm(@[0-9a-f]+)?$":
+    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+  "^watchdog(@[0-9a-f]+)?$":
+    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sl28cpld@4a {
+            compatible = "kontron,sl28cpld";
+            reg = <0x4a>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            watchdog@4 {
+                compatible = "kontron,sl28cpld-wdt";
+                reg = <0x4>;
+                kontron,assert-wdt-timeout-pin;
+            };
+
+            hwmon@b {
+                compatible = "kontron,sl28cpld-fan";
+                reg = <0xb>;
+            };
+
+            pwm@c {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xc>;
+                #pwm-cells = <2>;
+            };
+
+            pwm@e {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xe>;
+                #pwm-cells = <2>;
+            };
+
+            gpio@10 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x10>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-line-names = "a", "b", "c";
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@15 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x15>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@1a {
+                compatible = "kontron,sl28cpld-gpo";
+                reg = <0x1a>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@1b {
+                compatible = "kontron,sl28cpld-gpi";
+                reg = <0x1b>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            interrupt-controller@1c {
+                compatible = "kontron,sl28cpld-intc";
+                reg = <0x1c>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/lp87565.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/lp87565.txt
deleted file mode 100644
index 41671e0dc26b..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/lp87565.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-TI LP87565 PMIC MFD driver
-
-Required properties:
-  - compatible:	"ti,lp87565", "ti,lp87565-q1"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx should match
-			the supply_name populated in driver.
-Example:
-
-lp87565_pmic: pmic@60 {
-	compatible = "ti,lp87565-q1";
-	reg = <0x60>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck10-in-supply = <&vsys_3v3>;
-	buck23-in-supply = <&vsys_3v3>;
-
-	regulators: regulators {
-		buck10_reg: buck10 {
-			/* VDD_MPU */
-			regulator-name = "buck10";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		buck23_reg: buck23 {
-			/* VDD_GPU */
-			regulator-name = "buck23";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-TI LP87561 PMIC:
-
-This is a single output 4-phase regulator configuration
-
-Required properties:
-  - compatible:	"ti,lp87561-q1"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx should match
-			the supply_name populated in driver.
-Example:
-
-lp87561_pmic: pmic@62 {
-	compatible = "ti,lp87561-q1";
-	reg = <0x62>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck3210-in-supply = <&vsys_3v3>;
-
-	regulators: regulators {
-		buck3210_reg: buck3210 {
-			/* VDD_CORE */
-			regulator-name = "buck3210";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
index fffc8fde3302..79367a43b27d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
@@ -37,7 +37,7 @@ Required properties:
                    or generalized "qcom,spmi-pmic".
 - reg:             Specifies the SPMI USID slave address for this device.
                    For more information see:
-                   Documentation/devicetree/bindings/spmi/spmi.txt
+                   Documentation/devicetree/bindings/spmi/spmi.yaml
 
 Required properties for peripheral child nodes:
 - compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
index c3c02ce73cde..386eec06cf08 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
@@ -39,7 +39,7 @@ pmic: pmic@4b {
 	compatible = "rohm,bd70528";
 	reg = <0x4b>;
 	interrupt-parent = <&gpio1>;
-	interrupts = <29 GPIO_ACTIVE_LOW>;
+	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 	clocks = <&osc 0>;
 	#clock-cells = <0>;
 	clock-output-names = "bd70528-32k-out";
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
index 77bcca2d414f..5d531051a153 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -38,6 +38,9 @@ properties:
   "#clock-cells":
     const: 0
 
+  clock-output-names:
+    maxItems: 1
+
 # The BD71847 abd BD71850 support two different HW states as reset target
 # states. States are called as SNVS and READY. At READY state all the PMIC
 # power outputs go down and OTP is reload. At the SNVS state all other logic
@@ -116,12 +119,14 @@ required:
   - compatible
   - reg
   - interrupts
-  - clocks
-  - "#clock-cells"
   - regulators
 
 additionalProperties: false
 
+dependencies:
+  '#clock-cells': [clocks]
+  clocks: ['#clock-cells']
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
index 049ec2ffc7f9..8f4764a9ed45 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -38,8 +38,16 @@ properties:
               - allwinner,sun8i-h3-system-controller
               - allwinner,sun8i-v3s-system-controller
               - allwinner,sun50i-a64-system-controller
+              - hisilicon,dsa-subctrl
+              - hisilicon,hi6220-sramctrl
+              - hisilicon,pcie-sas-subctrl
+              - hisilicon,peri-subctrl
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
+              - samsung,exynos3-sysreg
+              - samsung,exynos4-sysreg
+              - samsung,exynos5-sysreg
+              - samsung,exynos5433-sysreg
 
           - const: syscon
 
@@ -67,7 +75,7 @@ required:
   - compatible
   - reg
 
-unevaluatedProperties: false
+additionalProperties: true
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index c8fd5d3e3071..19fcf59fd2fe 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -30,6 +30,9 @@ properties:
       - const: syscon
       - const: simple-mfd
 
+  reg:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -38,8 +41,8 @@ properties:
 
   ranges: true
 
-# Optional children
-
+patternProperties:
+  # Optional children
   "^serdes-ln-ctrl@[0-9a-f]+$":
     type: object
     description: |
@@ -54,7 +57,7 @@ required:
   - "#size-cells"
   - ranges
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
new file mode 100644
index 000000000000..c4fc5345d38d
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87524-Q1 four 1-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87524-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[0123]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck0
+      - buck1
+      - buck2
+      - buck3
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck[0123]-in-supply$":
+    description: Voltage regulator supply for each BUCK converter
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck0-in-supply
+  - buck1-in-supply
+  - buck2-in-supply
+  - buck3-in-supply
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87524-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck0-in-supply = <&vdd_5v0>;
+            buck1-in-supply = <&vdd_5v0>;
+            buck2-in-supply = <&vdd_5v0>;
+            buck3-in-supply = <&vdd_5v0>;
+
+            regulators {
+                buck0_reg: buck0 {
+                    regulator-name = "buck0";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                buck1_reg: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
new file mode 100644
index 000000000000..a7e57c0913e1
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87561-Q1 single 4-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87561-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck3210-in-supply:
+    description:
+      Voltage regulator supply for all the four BUCK converters.
+
+  regulators:
+    type: object
+
+    properties:
+      buck3210:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck3210
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck3210-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87561-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck3210-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck3210_reg: buck3210 {
+                    /* VDD_CORE */
+                    regulator-name = "buck3210";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
new file mode 100644
index 000000000000..1da6d6a958c9
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,lp87565
+      - const: ti,lp87565-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck10-in-supply:
+    description:
+      Voltage regulator supply for BUCK0 and BUCK1 converters.
+
+  buck23-in-supply:
+    description:
+      Voltage regulator supply for BUCK2 and BUCK3 converters.
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck(10|23)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck10
+      - buck23
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck10-in-supply
+  - buck23-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87565-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck10-in-supply = <&vsys_3v3>;
+            buck23-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck10_reg: buck10 {
+                    /* VDD_MPU */
+                    regulator-name = "buck10";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck23_reg: buck23 {
+                    /* VDD_GPU */
+                    regulator-name = "buck23";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
index abc9937506e0..8a1a6625c782 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
@@ -26,6 +26,12 @@ properties:
   reg:
     maxItems: 1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
 select:
   properties:
     compatible:
@@ -36,15 +42,19 @@ select:
   required:
     - compatible
 
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    $ref: /schemas/gpio/xylon,logicvc-gpio.yaml#
+
 required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     logicvc: logicvc@43c00000 {
       compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
       reg = <0x43c00000 0x6000>;
-      #address-cells = <1>;
-      #size-cells = <1>;
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/ingenic/devices.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
index 83c86cbe4716..ee00d414df10 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -47,4 +47,12 @@ properties:
         items:
           - const: yna,cu1830-neo
           - const: ingenic,x1830
+
+      - description: YSH & ATIL General Board, CU2000 Module with Neo Backplane
+        items:
+          - const: yna,cu2000-neo
+          - const: ingenic,x2000e
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
index 16fa03d65ad5..6df1a9470d8f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
@@ -32,12 +32,16 @@ properties:
   clocks:
     maxItems: 1
 
+  device_type: true
+
 required:
   - device_type
   - compatible
   - reg
   - clocks
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/jz4780-cgu.h>
@@ -52,7 +56,6 @@ examples:
                 reg = <0>;
 
                 clocks = <&cgu JZ4780_CLK_CPU>;
-                clock-names = "cpu";
         };
 
         cpu1: cpu@1 {
@@ -61,7 +64,6 @@ examples:
                 reg = <1>;
 
                 clocks = <&cgu JZ4780_CLK_CORE1>;
-                clock-names = "cpu";
         };
     };
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/loongson/devices.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/loongson/devices.yaml
index d25e80aa8b2a..9fee6708e6f5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/loongson/devices.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/loongson/devices.yaml
@@ -36,4 +36,7 @@ properties:
       - description: Virtual Loongson64 Quad Core + VirtIO
         items:
           - const: loongson,loongson64v-4core-virtio
+
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
index d317897e1115..7c0f9022202c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
@@ -23,6 +23,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     isa@0 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
index 892ba4384abc..43d777ed8316 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
@@ -1,11 +1,13 @@
-NVIDIA Tegra186 MISC register block
+NVIDIA Tegra186 (and later) MISC register block
 
-The MISC register block found on Tegra186 SoCs contains registers that can be
-used to identify a given chip and various strapping options.
+The MISC register block found on Tegra186 and later SoCs contains registers
+that can be used to identify a given chip and various strapping options.
 
 Required properties:
 - compatible: Must be:
   - Tegra186: "nvidia,tegra186-misc"
+  - Tegra194: "nvidia,tegra194-misc"
+  - Tegra234: "nvidia,tegra234-misc"
 - reg: Should contain 2 entries: The first entry gives the physical address
        and length of the register region which contains revision and debug
        features. The second entry specifies the physical address and length
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
index 4556359c5876..83f6a251ba3e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -1,10 +1,13 @@
-NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+NVIDIA Tegra APBMISC block
 
 Required properties:
-- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc".  For Tegra30,
-  must be "nvidia,tegra30-apbmisc".  Otherwise, must contain
-  "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
-  tegra124, tegra132.
+- compatible: Must be:
+  - Tegra20: "nvidia,tegra20-apbmisc"
+  - Tegra30: "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"
+  - Tegra114: "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"
+  - Tegra124: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
+  - Tegra132: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
+  - Tegra210: "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"
 - reg: Should contain 2 entries: the first entry gives the physical address
        and length of the registers which contain revision and debug features.
        The second entry gives the physical address and length of the
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
index e75d77beec6a..b3c45c046ba5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
@@ -28,11 +28,13 @@ properties:
     description: GPIO uspecifier of the CMD pin
     maxItems: 1
 
+  spi-cpha: true
+
 required:
   - compatible
   - cmd-gpios
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |
@@ -40,6 +42,8 @@ examples:
 
     spi {
       spi-slave;
+      #address-cells = <0>;
+      #size-cells = <0>;
       ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
 
       slave {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
index 0cd74c3116f8..60955acb8e57 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -50,6 +50,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 58fe9d02a781..0753289fba84 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -32,11 +32,11 @@ allOf:
         clock-output-names:
           oneOf:
             - items:
-              - const: clk_out_sd0
-              - const: clk_in_sd0
+                - const: clk_out_sd0
+                - const: clk_in_sd0
             - items:
-              - const: clk_out_sd1
-              - const: clk_in_sd1
+                - const: clk_out_sd1
+                - const: clk_in_sd1
 
 properties:
   compatible:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index d93f7794a85f..af7442f73881 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -117,6 +117,8 @@ required:
   - interrupts
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     emmc: mmc@5a000000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 10b45966f1b8..e71d13c2d109 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -21,23 +21,26 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx25-esdhc
-      - fsl,imx35-esdhc
-      - fsl,imx51-esdhc
-      - fsl,imx53-esdhc
-      - fsl,imx6q-usdhc
-      - fsl,imx6sl-usdhc
-      - fsl,imx6sx-usdhc
-      - fsl,imx6ull-usdhc
-      - fsl,imx7d-usdhc
-      - fsl,imx7ulp-usdhc
-      - fsl,imx8mq-usdhc
-      - fsl,imx8mm-usdhc
-      - fsl,imx8mn-usdhc
-      - fsl,imx8mp-usdhc
-      - fsl,imx8qm-usdhc
-      - fsl,imx8qxp-usdhc
+    oneOf:
+      - enum:
+          - fsl,imx25-esdhc
+          - fsl,imx35-esdhc
+          - fsl,imx51-esdhc
+          - fsl,imx53-esdhc
+          - fsl,imx6q-usdhc
+          - fsl,imx6sl-usdhc
+          - fsl,imx6sx-usdhc
+          - fsl,imx6ull-usdhc
+          - fsl,imx7d-usdhc
+          - fsl,imx7ulp-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mm-usdhc
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+              - fsl,imx8mq-usdhc
+              - fsl,imx8qxp-usdhc
+          - const: fsl,imx7d-usdhc
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
index 9b63df1c22fb..04ba8b7fc054 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -56,6 +56,8 @@ required:
   - dmas
   - dma-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/jz4780-cgu.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
new file mode 100644
index 000000000000..69ff065c9a39
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Mobile Storage Host Controller Binding
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    const: microchip,dw-sparx5-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to "core" clock for the sdhci controller.
+
+  clock-names:
+    items:
+      - const: core
+
+  microchip,clock-delay:
+    description: Delay clock to card to meet setup time requirements.
+      Each step increase by 1.25ns.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1
+    maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/microchip,sparx5.h>
+    sdhci0: mmc@600800000 {
+        compatible = "microchip,dw-sparx5-sdhci";
+        reg = <0x00800000 0x1000>;
+        pinctrl-0 = <&emmc_pins>;
+        pinctrl-names = "default";
+        clocks = <&clks CLK_ID_AUX1>;
+        clock-names = "core";
+        assigned-clocks = <&clks CLK_ID_AUX1>;
+        assigned-clock-rates = <800000000>;
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        bus-width = <8>;
+        microchip,clock-delay = <10>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index b96da0c7f819..186f04ba9357 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -14,6 +14,10 @@ description: |
   that requires the respective functionality should implement them using
   these definitions.
 
+  It is possible to assign a fixed index mmcN to an MMC host controller
+  (and the corresponding mmcblkN devices) by defining an alias in the
+  /aliases device tree node.
+
 properties:
   $nodename:
     pattern: "^mmc(@.*)?$"
@@ -349,6 +353,8 @@ dependencies:
   cd-debounce-delay-ms: [ cd-gpios ]
   fixed-emmc-driver-type: [ non-removable ]
 
+additionalProperties: true
+
 examples:
   - |
     mmc@ab000000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
index 77f746f57284..1fc7e620f328 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -36,6 +36,8 @@ required:
   - compatible
   - reset-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
index a68820d31d50..e0169a285aa2 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -28,6 +28,8 @@ required:
   - powerdown-gpios
   - reset-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 449215444723..6cd57863c1db 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -20,6 +20,8 @@ properties:
 
   reset-gpios:
     minItems: 1
+    # Put some limit to avoid false warnings
+    maxItems: 32
     description:
       contains a list of GPIO specifiers. The reset GPIOs are asserted
       at initialization and prior we start the power up procedure of the card.
@@ -50,6 +52,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/owl-mmc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index 1380501fb8f0..b6ab527087d5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -14,7 +14,11 @@ maintainers:
 
 properties:
   compatible:
-    const: actions,owl-mmc
+    oneOf:
+      - const: actions,owl-mmc
+      - items:
+          - const: actions,s700-mmc
+          - const: actions,owl-mmc
 
   reg:
     maxItems: 1
@@ -43,6 +47,8 @@ required:
   - dmas
   - dma-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     mmc0: mmc@e0330000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index b4c3fd40caeb..6bbf29b5c239 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -50,6 +50,7 @@ properties:
               - renesas,sdhi-r8a774a1 # RZ/G2M
               - renesas,sdhi-r8a774b1 # RZ/G2N
               - renesas,sdhi-r8a774c0 # RZ/G2E
+              - renesas,sdhi-r8a774e1 # RZ/G2H
               - renesas,sdhi-r8a7795  # R-Car H3
               - renesas,sdhi-r8a7796  # R-Car M3-W
               - renesas,sdhi-r8a77961 # R-Car M3-W+
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 01316185e771..3762f1c8de96 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -102,6 +102,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/rk3288-cru.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/sdhci-am654.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
deleted file mode 100644
index 6d202f4d9249..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs
-
-The bindings follow the mmc[1], clock[2] and interrupt[3] bindings.
-Only deviations are documented here.
-
-  [1] Documentation/devicetree/bindings/mmc/mmc.txt
-  [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
-  [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Required Properties:
-	- compatible: should be one of:
-			"ti,am654-sdhci-5.1": SDHCI on AM654 device.
-			"ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
-			"ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
-	- reg: Must be two entries.
-		- The first should be the sdhci register space
-		- The second should the subsystem/phy register space
-	- clocks: Handles to the clock inputs.
-	- clock-names: Tuple including "clk_xin" and "clk_ahb"
-	- interrupts: Interrupt specifiers
-	Output tap delay for each speed mode:
-	- ti,otap-del-sel-legacy
-	- ti,otap-del-sel-mmc-hs
-	- ti,otap-del-sel-sd-hs
-	- ti,otap-del-sel-sdr12
-	- ti,otap-del-sel-sdr25
-	- ti,otap-del-sel-sdr50
-	- ti,otap-del-sel-sdr104
-	- ti,otap-del-sel-ddr50
-	- ti,otap-del-sel-ddr52
-	- ti,otap-del-sel-hs200
-	- ti,otap-del-sel-hs400
-	  These bindings must be provided otherwise the driver will disable the
-	  corresponding speed mode (i.e. all nodes must provide at least -legacy)
-
-Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
-	- ti,trm-icp: DLL trim select
-	- ti,driver-strength-ohm: driver strength in ohms.
-				  Valid values are 33, 40, 50, 66 and 100 ohms.
-Optional Properties:
-	- ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0.
-	- ti,clkbuf-sel: Clock Delay Buffer Select
-
-Example:
-
-	sdhci0: sdhci@4f80000 {
-		compatible = "ti,am654-sdhci-5.1";
-		reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
-		power-domains = <&k3_pds 47>;
-		clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
-		clock-names = "clk_ahb", "clk_xin";
-		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-		sdhci-caps-mask = <0x80000007 0x0>;
-		mmc-ddr-1_8v;
-		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-mmc-hs = <0x0>;
-		ti,otap-del-sel-ddr52 = <0x5>;
-		ti,otap-del-sel-hs200 = <0x5>;
-		ti,otap-del-sel-hs400 = <0x0>;
-		ti,trm-icp = <0x8>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
new file mode 100644
index 000000000000..1ae945434c53
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI AM654 MMC Controller
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-sdhci-5.1
+      - ti,j721e-sdhci-8bit
+      - ti,j721e-sdhci-4bit
+      - ti,j7200-sdhci-8bit
+      - ti,j721e-sdhci-4bit
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: Handles to input clocks
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: clk_ahb
+      - const: clk_xin
+
+  # PHY output tap delays:
+  # Used to delay the data valid window and align it to the sampling clock.
+  # Binding needs to be provided for each supported speed mode otherwise the
+  # corresponding mode will be disabled.
+
+  ti,otap-del-sel-legacy:
+    description: Output tap delay for SD/MMC legacy timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-mmc-hs:
+    description: Output tap delay for MMC high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sd-hs:
+    description: Output tap delay for SD high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr12:
+    description: Output tap delay for SD UHS SDR12 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr25:
+    description: Output tap delay for SD UHS SDR25 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr50:
+    description: Output tap delay for SD UHS SDR50 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr104:
+    description: Output tap delay for SD UHS SDR104 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-ddr50:
+    description: Output tap delay for SD UHS DDR50 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-ddr52:
+    description: Output tap delay for eMMC DDR52 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-hs200:
+    description: Output tap delay for eMMC HS200 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-hs400:
+    description: Output tap delay for eMMC HS400 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  # PHY input tap delays:
+  # Used to delay the data valid window and align it to the sampling clock for
+  # modes that don't support tuning
+
+  ti,itap-del-sel-legacy:
+    description: Input tap delay for SD/MMC legacy timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-mmc-hs:
+    description: Input tap delay for MMC high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sd-hs:
+    description: Input tap delay for SD high speed timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sdr12:
+    description: Input tap delay for SD UHS SDR12 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sdr25:
+    description: Input tap delay for SD UHS SDR25 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-ddr52:
+    description: Input tap delay for MMC DDR52 timing
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0x1f
+
+  ti,trm-icp:
+    description: DLL trim select
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 0xf
+
+  ti,driver-strength-ohm:
+    description: DLL drive strength in ohms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum:
+      - 33
+      - 40
+      - 50
+      - 66
+      - 100
+
+  ti,strobe-sel:
+    description: strobe select delay for HS400 speed mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  ti,clkbuf-sel:
+    description: Clock Delay Buffer Select
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ti,otap-del-sel-legacy
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mmc0: mmc@4f80000 {
+            compatible = "ti,am654-sdhci-5.1";
+            reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+            power-domains = <&k3_pds 47>;
+            clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+            clock-names = "clk_ahb", "clk_xin";
+            interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+            sdhci-caps-mask = <0x80000007 0x0>;
+            mmc-ddr-1_8v;
+            ti,otap-del-sel-legacy = <0x0>;
+            ti,otap-del-sel-mmc-hs = <0x0>;
+            ti,otap-del-sel-ddr52 = <0x5>;
+            ti,otap-del-sel-hs200 = <0x5>;
+            ti,otap-del-sel-hs400 = <0x0>;
+            ti,itap-del-sel-legacy = <0x10>;
+            ti,itap-del-sel-mmc-hs = <0xa>;
+            ti,itap-del-sel-ddr52 = <0x3>;
+            ti,trm-icp = <0x8>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
index a58715c860b7..aa12480648a5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -73,6 +73,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/berlin2.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
index 8d6413f48823..56f9ff12742d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -77,6 +77,8 @@ required:
   - reset-names
   - resets
 
+unevaluatedProperties: false
+
 examples:
   - |
     sd: mmc@5a400000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
index 85bd528e9a14..8dfad89c78a7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -62,3 +62,5 @@ properties:
 
   dma-names:
     const: rx-tx
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
index dd2c1b147142..240abb6f102c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -42,6 +42,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     mmc@12200000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/denali,nand.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/denali,nand.yaml
index c07b91592cbd..1307ed7e7fc6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/denali,nand.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -128,6 +128,8 @@ required:
   - clock-names
   - clocks
 
+unevaluatedProperties: false
+
 examples:
   - |
     nand-controller@ff900000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index 3201372b7f85..28ff8c581837 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -20,12 +20,18 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-gpmi-nand
-      - fsl,imx28-gpmi-nand
-      - fsl,imx6q-gpmi-nand
-      - fsl,imx6sx-gpmi-nand
-      - fsl,imx7d-gpmi-nand
+    oneOf:
+      - enum:
+          - fsl,imx23-gpmi-nand
+          - fsl,imx28-gpmi-nand
+          - fsl,imx6q-gpmi-nand
+          - fsl,imx6sx-gpmi-nand
+          - fsl,imx7d-gpmi-nand
+      - items:
+          - enum:
+              - fsl,imx8mm-gpmi-nand
+              - fsl,imx8mn-gpmi-nand
+          - const: fsl,imx7d-gpmi-nand
 
   reg:
     items:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
index 8abb6d463cb6..89aa3ceda592 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -51,6 +51,8 @@ required:
   - compatible
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/jz4780-cgu.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 40fc5b0b2b8c..b29050fd7470 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,6 +55,37 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/string
         enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
 
+      nand-ecc-engine:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/phandle
+        description: |
+          A phandle on the hardware ECC engine if any. There are
+          basically three possibilities:
+          1/ The ECC engine is part of the NAND controller, in this
+          case the phandle should reference the parent node.
+          2/ The ECC engine is part of the NAND part (on-die), in this
+          case the phandle should reference the node itself.
+          3/ The ECC engine is external, in this case the phandle should
+          reference the specific ECC engine node.
+
+      nand-use-soft-ecc-engine:
+        type: boolean
+        description: Use a software ECC engine.
+
+      nand-no-ecc-engine:
+        type: boolean
+        description: Do not use any ECC correction.
+
+      nand-ecc-placement:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+          - enum: [ oob, interleaved ]
+        description:
+          Location of the ECC bytes. This location is unknown by default
+          but can be explicitly set to "oob", if all ECC bytes are
+          known to be stored in the OOB area, or "interleaved" if ECC
+          bytes will be interleaved with regular data in the main area.
+
       nand-ecc-algo:
         description:
           Desired ECC algorithm.
@@ -128,6 +159,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: true
+
 examples:
   - |
     nand-controller {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index 28a08ff407db..29c5ef24ac6a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -94,6 +94,8 @@ required:
   - reg
   - interrupts
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/adi,adin.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/adi,adin.yaml
index d95cc691a65f..1129f2b58e98 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -36,6 +36,8 @@ properties:
     enum: [ 4, 8, 12, 16, 20, 24 ]
     default: 8
 
+unevaluatedProperties: false
+
 examples:
   - |
     ethernet {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 85fefe3a0444..6b057b117aa0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -120,6 +120,8 @@ required:
   - clock-names
   - phy-mode
 
+unevaluatedProperties: false
+
 examples:
   - |
     ethmac: ethernet@c9410000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
index 71808e78a495..1c88820cbcdf 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -30,6 +30,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+unevaluatedProperties: false
+
 examples:
   - |
     mdio0: mdio@1e650000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
index 88b57b0ca1f4..97ca62b0e14d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -50,6 +50,13 @@ Optional properties:
 - reset-names: If the "reset" property is specified, this property should have
   the value "switch" to denote the switch reset line.
 
+- clocks: when provided, the first phandle is to the switch's main clock and
+  is valid for both BCM7445 and BCM7278. The second phandle is only applicable
+  to BCM7445 and is to support dividing the switch core clock.
+
+- clock-names: when provided, the first phandle must be "sw_switch", and the
+  second must be named "sw_switch_mdiv".
+
 Port subnodes:
 
 Optional properties:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/brcm,systemport.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/brcm,systemport.txt
index 83f29e0e11ba..75736739bfdd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/brcm,systemport.txt
@@ -20,6 +20,11 @@ Optional properties:
 - systemport,num-tier1-arb: number of tier 1 arbiters, an integer
 - systemport,num-txq: number of HW transmit queues, an integer
 - systemport,num-rxq: number of HW receive queues, an integer
+- clocks: When provided, must be two phandles to the functional clocks nodes of
+  the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
+  during normal operation, while the second phandle is the Wake-on-LAN clock.
+- clock-names: When provided, names of the functional clock phandles, first
+  name should be "sw_sysport" and second should be "sw_sysportwol".
 
 Example:
 ethernet@f04a0000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/can-controller.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/can-controller.yaml
new file mode 100644
index 000000000000..9cf2ae097156
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^can(@.*)?$"
+
+additionalProperties: true
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/can-transceiver.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
index 6396977d29e5..d1ef1fe6ab29 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
@@ -16,3 +16,5 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run.
     minimum: 1
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
new file mode 100644
index 000000000000..13875eab2ed6
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8qm-flexcan
+          - fsl,imx8mp-flexcan
+          - fsl,imx6q-flexcan
+          - fsl,imx28-flexcan
+          - fsl,imx25-flexcan
+          - fsl,p1010-flexcan
+          - fsl,vf610-flexcan
+          - fsl,ls1021ar2-flexcan
+          - fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - fsl,imx53-flexcan
+              - fsl,imx35-flexcan
+          - const: fsl,imx25-flexcan
+      - items:
+          - enum:
+              - fsl,imx7d-flexcan
+              - fsl,imx6ul-flexcan
+              - fsl,imx6sx-flexcan
+          - const: fsl,imx6q-flexcan
+      - items:
+          - enum:
+              - fsl,ls1028ar1-flexcan
+          - const: fsl,lx2160ar1-flexcan
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  clock-frequency:
+    description: |
+      The oscillator frequency driving the flexcan device, filled in by the
+      boot loader. This property should only be used the used operating system
+      doesn't support the clocks and clock-names property.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This means the registers of FlexCAN controller are big endian. This is
+      optional property.i.e. if this property is not present in device tree
+      node then controller is assumed to be little endian. If this property is
+      present then controller is assumed to be big endian.
+
+  fsl,stop-mode:
+    description: |
+      Register bits of stop mode control.
+
+      The format should be as follows:
+      <gpr req_gpr req_bit>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of CAN stop request.
+      req_bit is the bit offset of CAN stop request.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: The 'gpr' is the phandle to general purpose register node.
+        - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+          maximum: 0xff
+        - description: The 'req_bit' is the bit offset of CAN stop request.
+          maximum: 0x1f
+
+  fsl,clk-source:
+    description: |
+      Select the clock source to the CAN Protocol Engine (PE). It's SoC
+      implementation dependent. Refer to RM for detailed definition. If this
+      property is not set in device tree node then driver selects clock source 1
+      by default.
+      0: clock source 0 (oscillator clock)
+      1: clock source 1 (peripheral clock)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    minimum: 0
+    maximum: 1
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable CAN remote wakeup.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    can@1c000 {
+        compatible = "fsl,p1010-flexcan";
+        reg = <0x1c000 0x1000>;
+        interrupts = <48 0x2>;
+        interrupt-parent = <&mpic>;
+        clock-frequency = <200000000>;
+        fsl,clk-source = <0>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    can@2090000 {
+        compatible = "fsl,imx6q-flexcan";
+        reg = <0x02090000 0x4000>;
+        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 1>, <&clks 2>;
+        clock-names = "ipg", "per";
+        fsl,stop-mode = <&gpr 0x34 28>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
deleted file mode 100644
index 94c0f8bf4deb..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
-
-Required properties:
-
-- compatible : Should be "fsl,<processor>-flexcan"
-
-  An implementation should also claim any of the following compatibles
-  that it is fully backwards compatible with:
-
-  - fsl,p1010-flexcan
-
-- reg : Offset and length of the register set for this device
-- interrupts : Interrupt tuple for this device
-
-Optional properties:
-
-- clock-frequency : The oscillator frequency driving the flexcan device
-
-- xceiver-supply: Regulator that powers the CAN transceiver
-
-- big-endian: This means the registers of FlexCAN controller are big endian.
-              This is optional property.i.e. if this property is not present in
-              device tree node then controller is assumed to be little endian.
-              if this property is present then controller is assumed to be big
-              endian.
-
-- fsl,stop-mode: register bits of stop mode control, the format is
-		 <&gpr req_gpr req_bit ack_gpr ack_bit>.
-		 gpr is the phandle to general purpose register node.
-		 req_gpr is the gpr register offset of CAN stop request.
-		 req_bit is the bit offset of CAN stop request.
-		 ack_gpr is the gpr register offset of CAN stop acknowledge.
-		 ack_bit is the bit offset of CAN stop acknowledge.
-
-- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
-		  It's SoC Implementation dependent. Refer to RM for detailed
-		  definition. If this property is not set in device tree node
-		  then driver selects clock source 1 by default.
-		  0: clock source 0 (oscillator clock)
-		  1: clock source 1 (peripheral clock)
-
-- wakeup-source: enable CAN remote wakeup
-
-Example:
-
-	can@1c000 {
-		compatible = "fsl,p1010-flexcan";
-		reg = <0x1c000 0x1000>;
-		interrupts = <48 0x2>;
-		interrupt-parent = <&mpic>;
-		clock-frequency = <200000000>; // filled in by bootloader
-		fsl,clk-source = <0>; // select clock source 0 for PE
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index 5a0111d4de58..381f8fb3e865 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -12,6 +12,9 @@ Required properties:
 Optional properties:
  - vdd-supply: Regulator that powers the CAN controller.
  - xceiver-supply: Regulator that powers the CAN transceiver.
+ - gpio-controller: Indicates this device is a GPIO controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+                the second cell is used to specify the gpio polarity.
 
 Example:
 	can0: can@1 {
@@ -19,7 +22,9 @@ Example:
 		reg = <1>;
 		clocks = <&clk24m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 0x2>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
new file mode 100644
index 000000000000..2a884c1fe0e0
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree
+  bindings
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: microchip,mcp2517fd
+        description: for MCP2517FD
+      - const: microchip,mcp2518fd
+        description: for MCP2518FD
+      - const: microchip,mcp251xfd
+        description: to autodetect chip variant
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that powers the CAN controller.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  microchip,rx-int-gpios:
+    description:
+      GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+      signals a pending RX interrupt.
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Must be half or less of "clocks" frequency.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        can@0 {
+            compatible = "microchip,mcp251xfd";
+            reg = <0>;
+            clocks = <&can0_osc>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&can0_pins>;
+            spi-max-frequency = <20000000>;
+            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+            microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/rcar_can.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 85c6551b602a..6a5956347816 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -2,13 +2,15 @@ Renesas R-Car CAN controller Device Tree Bindings
 -------------------------------------------------
 
 Required properties:
-- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
+- compatible: "renesas,can-r8a7742" if CAN controller is a part of R8A7742 SoC.
+	      "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
 	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
 	      "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
 	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
 	      "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
+	      "renesas,can-r8a774e1" if CAN controller is a part of R8A774E1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -37,8 +39,8 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
-R8A77965, R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795,
+R8A7796, R8A77965, R8A77990, and R8A77995:
 For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
 be used by both CAN and CAN FD controller at the same time. It needs to be
 scaled to maximum frequency if any of these controllers use it. This is done
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/rcar_canfd.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
index 13a4e34c0c73..22cf2a889b2c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
@@ -7,6 +7,7 @@ Required properties:
   - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
   - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller.
   - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
+  - "renesas,r8a774e1-canfd" for R8A774E1 (RZ/G2H) compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
   - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
   - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller.
@@ -32,8 +33,8 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
 child node supports the "status" property only, which is used to
 enable/disable the respective channel.
 
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
-R8A77965, R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795,
+R8A7796, R8A77965, R8A77990, and R8A77995:
 In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
 and CAN FD controller at the same time. It needs to be scaled to maximum
 frequency if any of these controllers use it. This is done using the below
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 3613c2c8f75d..0968b40aef1e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -33,7 +33,7 @@ tcan4x5x: tcan4x5x@0 {
 		spi-max-frequency = <10000000>;
 		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 GPIO_ACTIVE_LOW>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/dsa/b53.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/dsa/b53.txt
index cfd1afdc6e94..f1487a751b1a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -95,7 +95,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 
 		fixed-link {
 			speed = <1000>;
-			duplex-full;
+			full-duplex;
 		};
 	};
 
@@ -104,8 +104,9 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch0: ethernet-switch@30 {
+		switch0: ethernet-switch@1e {
 			compatible = "brcm,bcm53125";
+			reg = <30>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -128,7 +129,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 					label = "cable-modem";
 					fixed-link {
 						speed = <1000>;
-						duplex-full;
+						full-duplex;
 					};
 					phy-mode = "rgmii-txid";
 				};
@@ -138,7 +139,7 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 					label = "cpu";
 					fixed-link {
 						speed = <1000>;
-						duplex-full;
+						full-duplex;
 					};
 					phy-mode = "rgmii-txid";
 					ethernet = <&eth0>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 6a1ec50ad4fd..a765ceba28c6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -89,4 +89,6 @@ oneOf:
   - required:
       - ethernet-ports
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/dsa/mt7530.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index c5ed5d25f642..560369efad6c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -5,6 +5,7 @@ Required properties:
 
 - compatible: may be compatible = "mediatek,mt7530"
 	or compatible = "mediatek,mt7621"
+	or compatible = "mediatek,mt7531"
 - #address-cells: Must be 1.
 - #size-cells: Must be 0.
 - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
@@ -32,10 +33,14 @@ Required properties for the child nodes within ports container:
 
 - reg: Port address described must be 6 for CPU port and from 0 to 5 for
 	user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
-	 "cpu".
-
-Port 5 of the switch is muxed between:
+- phy-mode: String, the following values are acceptable for port labeled
+	"cpu":
+	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
+	must be either "trgmii" or "rgmii"
+	If compatible mediatek,mt7531 is set,
+	must be either "sgmii", "1000base-x" or "2500base-x"
+
+Port 5 of mt7530 and mt7621 switch is muxed between:
 1. GMAC5: GMAC5 can interface with another external MAC or PHY.
 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
    of the SOC. Used in many setups where port 0/4 becomes the WAN port.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index fa2baca8c726..fdf709817218 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -120,6 +120,13 @@ properties:
       and is useful for determining certain configuration settings
       such as flow control thresholds.
 
+  rx-internal-delay-ps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Receive Clock Delay defined in pico seconds.
+      This is used for controllers that have configurable RX internal delays.
+      If this property is present then the MAC applies the RX delay.
+
   sfp:
     $ref: /schemas/types.yaml#definitions/phandle
     description:
@@ -131,6 +138,13 @@ properties:
       The size of the controller\'s transmit fifo in bytes. This
       is used for components that can have configurable fifo sizes.
 
+  tx-internal-delay-ps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Transmit Clock Delay defined in pico seconds.
+      This is used for controllers that have configurable TX internal delays.
+      If this property is present then the MAC applies the TX delay.
+
   managed:
     description:
       Specifies the PHY management type. If auto is set and fixed-link
@@ -205,4 +219,6 @@ properties:
           required:
             - speed
 
+additionalProperties: true
+
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index a9e547ac7905..6dd72faebd89 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -177,6 +177,8 @@ properties:
 required:
   - reg
 
+additionalProperties: true
+
 examples:
   - |
     ethernet {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
new file mode 100644
index 000000000000..c1948ce00081
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel DWMAC glue layer Device Tree Bindings
+
+maintainers:
+  - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - intel,keembay-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - intel,keembay-dwmac
+          - const: snps,dwmac-4.10a
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: PTP reference clock
+      - description: Tx clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: ptp_ref
+      - const: tx_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+# FIXME: Remove defines and include the correct header file
+# once it is available in mainline.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define MOVISOC_KMB_PSS_GBE
+    #define MOVISOC_KMB_PSS_AUX_GBE_PTP
+    #define MOVISOC_KMB_PSS_AUX_GBE_TX
+
+    stmmac_axi_setup: stmmac-axi-config {
+        snps,lpi_en;
+        snps,wr_osr_lmt = <0x0>;
+        snps,rd_osr_lmt = <0x2>;
+        snps,blen = <0 0 0 0 16 8 4>;
+    };
+
+    mtl_rx_setup: rx-queues-config {
+        snps,rx-queues-to-use = <2>;
+        snps,rx-sched-sp;
+        queue0 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x0>;
+            snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x1>;
+            snps,priority = <0x1>;
+        };
+    };
+
+    mtl_tx_setup: tx-queues-config {
+        snps,tx-queues-to-use = <2>;
+        snps,tx-sched-wrr;
+        queue0 {
+           snps,weight = <0x10>;
+           snps,dcb-algorithm;
+           snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,weight = <0x10>;
+            snps,dcb-algorithm;
+            snps,priority = <0x1>;
+        };
+    };
+
+    gmac0: ethernet@3a000000 {
+        compatible = "intel,keembay-dwmac", "snps,dwmac-4.10a";
+        interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        reg = <0x3a000000 0x8000>;
+        snps,perfect-filter-entries = <128>;
+        phy-handle = <&eth_phy0>;
+        phy-mode = "rgmii";
+        rx-fifo-depth = <4096>;
+        tx-fifo-depth = <4096>;
+        clock-names = "stmmaceth", "ptp_ref", "tx_clk";
+        clocks = <&scmi_clk MOVISOC_KMB_PSS_GBE>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_PTP>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_TX>;
+        snps,pbl = <0x4>;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,mtl-rx-config = <&mtl_rx_setup>;
+        snps,mtl-tx-config = <&mtl_tx_setup>;
+        snps,tso;
+        status = "okay";
+
+        mdio0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 68573762294b..8e288ab38fd7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -35,6 +35,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+unevaluatedProperties: false
+
 examples:
   - |
     /* USB host controller */
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/marvell,prestera.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 83370ebf5b89..e28938ddfdf5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -45,3 +45,37 @@ dfx-server {
 	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
 	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 };
+
+Marvell Prestera SwitchDev bindings
+-----------------------------------
+Optional properties:
+- compatible: must be "marvell,prestera"
+- base-mac-provider: describes handle to node which provides base mac address,
+	might be a static base mac address or nvme cell provider.
+
+Example:
+
+eeprom_mac_addr: eeprom-mac-addr {
+       compatible = "eeprom,mac-addr-cell";
+       status = "okay";
+
+       nvmem = <&eeprom_at24>;
+};
+
+prestera {
+       compatible = "marvell,prestera";
+       status = "okay";
+
+       base-mac-provider = <&eeprom_mac_addr>;
+};
+
+The current implementation of Prestera Switchdev PCI interface driver requires
+that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
+
+&cp0_pcie0 {
+	ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
+		0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
+		0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
+	phys = <&cp0_comphy0 0>;
+	status = "okay";
+};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/mdio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/mdio.yaml
index 26afb556dfae..e811e0fd851c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/mdio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/mdio.yaml
@@ -100,6 +100,8 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
     davinci_mdio: mdio@5c030000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
index aea88e621792..0bbd598704e9 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
@@ -61,6 +61,8 @@ required:
   - mediatek,pericfg
   - phy-handle
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index cfaf88998918..9e4dc510a40a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
 		clock-frequency = <100000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_HIGH>;
+		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nfc/pn544.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nfc/pn544.txt
index 92f399ec22b8..2bd82562ce8e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with PN544 on I2C2):
 		clock-frequency = <400000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 GPIO_ACTIVE_HIGH>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
-  sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
-	s3fwrn5@27 {
-		compatible = "samsung,s3fwrn5-i2c";
-
-		reg = <0x27>;
-
-		interrupt-parent = <&gpa1>;
-		interrupts = <3 0 0>;
-
-		s3fwrn5,en-gpios = <&gpf1 4 0>;
-		s3fwrn5,fw-gpios = <&gpj0 2 0>;
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 000000000000..cb0b8a560282
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,s3fwrn5-i2c
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used for enabling/disabling the chip
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+  s3fwrn5,en-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use en-gpios
+
+  s3fwrn5,fw-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use wake-gpios
+
+additionalProperties: false
+
+required:
+  - compatible
+  - en-gpios
+  - interrupts
+  - reg
+  - wake-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c4 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        s3fwrn5@27 {
+            compatible = "samsung,s3fwrn5-i2c";
+            reg = <0x27>;
+
+            interrupt-parent = <&gpa1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+            en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
index 42be0255512b..d51da24f3505 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -34,6 +34,8 @@ patternProperties:
     required:
       - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     mdio {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qca,ar71xx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index f99a5aabe923..f0db22645d73 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -72,6 +72,8 @@ required:
   - resets
   - reset-names
 
+unevaluatedProperties: false
+
 examples:
   # Lager board
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qca,ar803x.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index 1788884b8c28..64b3357ade8a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -59,6 +59,8 @@ properties:
       regulator to VDDIO.
     $ref: /schemas/regulator/regulator.yaml
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/net/qca-ar803x.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 8594f114f016..4d8464b2676d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -144,6 +144,8 @@ oneOf:
   - required:
       - memory-region
 
+additionalProperties: false
+
 examples:
   - |
         #include <dt-bindings/interrupt-controller/irq.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
index 13555a89975f..0c973310ada0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -31,6 +31,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+unevaluatedProperties: false
+
 examples:
   - |
     mdio@90000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
index 67df3fe861ee..948677ade6d1 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -33,6 +33,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
index c488f24ed38f..4f485df69ac3 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -37,6 +37,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -49,6 +51,6 @@ examples:
         bluetooth {
             compatible = "realtek,rtl8723bs-bt";
             device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
-            host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+            host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
         };
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
new file mode 100644
index 000000000000..244befb6402a
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,etheravb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet AVB
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,etheravb-r8a7742      # RZ/G1H
+              - renesas,etheravb-r8a7743      # RZ/G1M
+              - renesas,etheravb-r8a7744      # RZ/G1N
+              - renesas,etheravb-r8a7745      # RZ/G1E
+              - renesas,etheravb-r8a77470     # RZ/G1C
+              - renesas,etheravb-r8a7790      # R-Car H2
+              - renesas,etheravb-r8a7791      # R-Car M2-W
+              - renesas,etheravb-r8a7792      # R-Car V2H
+              - renesas,etheravb-r8a7793      # R-Car M2-N
+              - renesas,etheravb-r8a7794      # R-Car E2
+          - const: renesas,etheravb-rcar-gen2 # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,etheravb-r8a774a1     # RZ/G2M
+              - renesas,etheravb-r8a774b1     # RZ/G2N
+              - renesas,etheravb-r8a774c0     # RZ/G2E
+              - renesas,etheravb-r8a774e1     # RZ/G2H
+              - renesas,etheravb-r8a7795      # R-Car H3
+              - renesas,etheravb-r8a7796      # R-Car M3-W
+              - renesas,etheravb-r8a77961     # R-Car M3-W+
+              - renesas,etheravb-r8a77965     # R-Car M3-N
+              - renesas,etheravb-r8a77970     # R-Car V3M
+              - renesas,etheravb-r8a77980     # R-Car V3H
+              - renesas,etheravb-r8a77990     # R-Car E3
+              - renesas,etheravb-r8a77995     # R-Car D3
+          - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+  reg: true
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  '#address-cells':
+    description: Number of address cells for the MDIO bus.
+    const: 1
+
+  '#size-cells':
+    description: Number of size cells on the MDIO bus.
+    const: 0
+
+  renesas,no-ether-link:
+    type: boolean
+    description:
+      Specify when a board does not provide a proper AVB_LINK signal.
+
+  renesas,ether-link-active-low:
+    type: boolean
+    description:
+      Specify when the AVB_LINK signal is active-low instead of normal
+      active-high.
+
+  rx-internal-delay-ps:
+    enum: [0, 1800]
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-rcar-gen2
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+    then:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+            - description: Stream buffer
+    else:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-rcar-gen2
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: mux
+        rx-internal-delay-ps: false
+    else:
+      properties:
+        interrupts:
+          minItems: 25
+          maxItems: 25
+        interrupt-names:
+          items:
+            pattern: '^ch[0-9]+$'
+      required:
+        - interrupt-names
+        - rx-internal-delay-ps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-r8a774a1
+              - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+              - renesas,etheravb-r8a77970
+              - renesas,etheravb-r8a77980
+    then:
+      required:
+        - tx-internal-delay-ps
+    else:
+      properties:
+        tx-internal-delay-ps: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77995
+    then:
+      properties:
+        rx-internal-delay-ps:
+          const: 1800
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77980
+    then:
+      properties:
+        tx-internal-delay-ps:
+          const: 2000
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    aliases {
+            ethernet0 = &avb;
+    };
+
+    avb: ethernet@e6800000 {
+            compatible = "renesas,etheravb-r8a7795",
+                         "renesas,etheravb-rcar-gen3";
+            reg = <0xe6800000 0x800>, <0xe6a00000 0x10000>;
+            interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6",
+                              "ch7", "ch8", "ch9", "ch10", "ch11", "ch12",
+                              "ch13", "ch14", "ch15", "ch16", "ch17", "ch18",
+                              "ch19", "ch20", "ch21", "ch22", "ch23", "ch24";
+            clocks = <&cpg CPG_MOD 812>;
+            iommus = <&ipmmu_ds0 16>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 812>;
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            rx-internal-delay-ps = <0>;
+            tx-internal-delay-ps = <2000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy0: ethernet-phy@0 {
+                    rxc-skew-ps = <1500>;
+                    reg = <0>;
+                    interrupt-parent = <&gpio2>;
+                    interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+                    reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+            };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/renesas,ravb.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/renesas,ravb.txt
deleted file mode 100644
index 9119f1caf391..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-* Renesas Electronics Ethernet AVB
-
-This file provides information on what the device node for the Ethernet AVB
-interface contains.
-
-Required properties:
-- compatible: Must contain one or more of the following:
-      - "renesas,etheravb-r8a7742" for the R8A7742 SoC.
-      - "renesas,etheravb-r8a7743" for the R8A7743 SoC.
-      - "renesas,etheravb-r8a7744" for the R8A7744 SoC.
-      - "renesas,etheravb-r8a7745" for the R8A7745 SoC.
-      - "renesas,etheravb-r8a77470" for the R8A77470 SoC.
-      - "renesas,etheravb-r8a7790" for the R8A7790 SoC.
-      - "renesas,etheravb-r8a7791" for the R8A7791 SoC.
-      - "renesas,etheravb-r8a7792" for the R8A7792 SoC.
-      - "renesas,etheravb-r8a7793" for the R8A7793 SoC.
-      - "renesas,etheravb-r8a7794" for the R8A7794 SoC.
-      - "renesas,etheravb-rcar-gen2" as a fallback for the above
-		R-Car Gen2 and RZ/G1 devices.
-
-      - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
-      - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
-      - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
-      - "renesas,etheravb-r8a774e1" for the R8A774E1 SoC.
-      - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
-      - "renesas,etheravb-r8a7796" for the R8A77960 SoC.
-      - "renesas,etheravb-r8a77961" for the R8A77961 SoC.
-      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
-      - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
-      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
-      - "renesas,etheravb-r8a77990" for the R8A77990 SoC.
-      - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
-      - "renesas,etheravb-rcar-gen3" as a fallback for the above
-		R-Car Gen3 and RZ/G2 devices.
-
-	When compatible with the generic version, nodes must list the
-	SoC-specific version corresponding to the platform first followed by
-	the generic version.
-
-- reg: Offset and length of (1) the register block and (2) the stream buffer.
-       The region for the register block is mandatory.
-       The region for the stream buffer is optional, as it is only present on
-       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A77960),
-       M3-W+ (R8A77961), and M3-N (R8A77965).
-- interrupts: A list of interrupt-specifiers, one for each entry in
-	      interrupt-names.
-	      If interrupt-names is not present, an interrupt specifier
-	      for a single muxed interrupt.
-- phy-mode: see ethernet.txt file in the same directory.
-- phy-handle: see ethernet.txt file in the same directory.
-- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
-- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
-- clocks: clock phandle and specifier pair.
-- pinctrl-0: phandle, referring to a default pin configuration node.
-
-Optional properties:
-- interrupt-names: A list of interrupt names.
-		   For the R-Car Gen 3 SoCs this property is mandatory;
-		   it should include one entry per channel, named "ch%u",
-		   where %u is the channel number ranging from 0 to 24.
-		   For other SoCs this property is optional; if present
-		   it should contain "mux" for a single muxed interrupt.
-- pinctrl-names: pin configuration state name ("default").
-- renesas,no-ether-link: boolean, specify when a board does not provide a proper
-			 AVB_LINK signal.
-- renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is
-				 active-low instead of normal active-high.
-
-Example:
-
-	ethernet@e6800000 {
-		compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3";
-		reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1", "ch2", "ch3",
-				  "ch4", "ch5", "ch6", "ch7",
-				  "ch8", "ch9", "ch10", "ch11",
-				  "ch12", "ch13", "ch14", "ch15",
-				  "ch16", "ch17", "ch18", "ch19",
-				  "ch20", "ch21", "ch22", "ch23",
-				  "ch24";
-		clocks = <&cpg CPG_MOD 812>;
-		power-domains = <&cpg>;
-		phy-mode = "rgmii-id";
-		phy-handle = <&phy0>;
-
-		pinctrl-0 = <&ether_pins>;
-		pinctrl-names = "default";
-		renesas,no-ether-link;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			rxc-skew-ps = <900>;
-			rxdv-skew-ps = <0>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txc-skew-ps = <900>;
-			txen-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/smsc-lan87xx.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
index 8b7c719b0bb9..a8d0dc9a8c0e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -5,6 +5,10 @@ through an Ethernet OF device node.
 
 Optional properties:
 
+- clocks:
+  The clock used as phy reference clock and is connected to phy
+  pin XTAL1/CLKIN.
+
 - smsc,disable-energy-detect:
   If set, do not enable energy detect mode for the SMSC phy.
   default: enable energy detect mode
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 30a1efd26626..11a6fdb657c9 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -356,6 +356,8 @@ allOf:
             Enables the TSO feature otherwise it will be managed by
             MAC HW capability register.
 
+additionalProperties: true
+
 examples:
   - |
     stmmac_axi_setup: stmmac-axi-config {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/socionext-netsec.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/socionext-netsec.txt
index 9d6c9feb12ff..a3c1dffaa4bb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/socionext-netsec.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/socionext-netsec.txt
@@ -30,7 +30,9 @@ Optional properties: (See ethernet.txt file in the same directory)
 - max-frame-size: See ethernet.txt in the same directory.
 
 The MAC address will be determined using the optional properties
-defined in ethernet.txt.
+defined in ethernet.txt. The 'phy-mode' property is required, but may
+be set to the empty string if the PHY configuration is programmed by
+the firmware or set by hardware straps, and needs to be preserved.
 
 Example:
 	eth0: ethernet@522d0000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/stm32-dwmac.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index e5dff66df481..27eb6066793f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -88,6 +88,8 @@ required:
   - clock-names
   - st,syscon
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index d454c1fab930..5728fe23f530 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -58,6 +58,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+unevaluatedProperties: false
+
 examples:
   - |
     davinci_mdio: mdio@4a101000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
new file mode 100644
index 000000000000..75e8712e903a
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI DP83822 ethernet PHY
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
+  provides all of the physical layer functions needed to transmit and receive
+  data over standard, twisted-pair cables or to connect to an external,
+  fiber-optic transceiver. Additionally, the DP83822 provides flexibility to
+  connect to a MAC through a standard MII, RMII, or RGMII interface
+
+  Specifications about the Ethernet PHY can be found at:
+    http://www.ti.com/lit/ds/symlink/dp83822i.pdf
+
+allOf:
+  - $ref: "ethernet-phy.yaml#"
+
+properties:
+  reg:
+    maxItems: 1
+
+  ti,link-loss-low:
+    type: boolean
+    description: |
+       DP83822 PHY in Fiber mode only.
+       Sets the DP83822 to detect a link drop condition when the signal goes
+       high.  If not set then link drop will occur when the signal goes low.
+       This property is only applicable if the fiber mode support is strapped
+       to on.
+
+  ti,fiber-mode:
+    type: boolean
+    description: |
+       DP83822 PHY only.
+       If present the DP83822 PHY is configured to operate in fiber mode
+       Fiber mode support can also be strapped. If the strap pin is not set
+       correctly or not set at all then this boolean can be used to enable it.
+       If the fiber mode is not strapped then signal detection for the PHY
+       is disabled.
+       In fiber mode, auto-negotiation is disabled and the PHY can only work in
+       100base-fx (full and half duplex) modes.
+
+  rx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the RX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to receive data.
+
+  tx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the TX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to transmit data.
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        rx-internal-delay-ps = <1>;
+        tx-internal-delay-ps = <1>;
+      };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ti,dp83867.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,dp83867.yaml
index c6716ac6cbcc..4050a3608658 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ti,dp83867.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -109,6 +109,8 @@ properties:
 required:
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/net/ti-dp83867.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ti,dp83869.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,dp83869.yaml
index cf40b469c719..c3235f08e326 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/ti,dp83869.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -79,6 +79,8 @@ properties:
 required:
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/net/ti-dp83869.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
index 2c320eb2a8c4..6c35682377e6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -18,6 +18,8 @@ properties:
   compatible:
     const: microchip,wilc1000
 
+  reg: true
+
   spi-max-frequency: true
 
   interrupts:
@@ -34,6 +36,8 @@ required:
   - compatible
   - interrupts
 
+additionalProperties: false
+
 examples:
   - |
     spi {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index bb758e9ab091..2d7a43a0438b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -65,7 +65,8 @@ Optional properties:
 				     the length can vary between hw versions.
 - <supply-name>-supply: handle to the regulator device tree node
 			   optional "supply-name" are "vdd-0.8-cx-mx",
-			   "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0".
+			   "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
+			   and "vdd-3.3-ch1".
 - memory-region:
 	Usage: optional
 	Value type: <phandle>
@@ -204,6 +205,7 @@ wifi@18000000 {
 		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+		vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
 		memory-region = <&wifi_msa_mem>;
 		iommus = <&apps_smmu 0x0040 0x1>;
 		qcom,msa-fixed-perm;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index a1717db36dba..4b365c9d9378 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -17,7 +17,9 @@ description: |
 
 properties:
   compatible:
-    const: qcom,ipq8074-wifi
+    enum:
+      - qcom,ipq8074-wifi
+      - qcom,ipq6018-wifi
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index 1c9d7f05f173..8a43dc1283fe 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -19,21 +19,29 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - fsl,imx6q-ocotp
-          - fsl,imx6sl-ocotp
-          - fsl,imx6sx-ocotp
-          - fsl,imx6ul-ocotp
-          - fsl,imx6ull-ocotp
-          - fsl,imx7d-ocotp
-          - fsl,imx6sll-ocotp
-          - fsl,imx7ulp-ocotp
-          - fsl,imx8mq-ocotp
-          - fsl,imx8mm-ocotp
-          - fsl,imx8mn-ocotp
-          - fsl,imx8mp-ocotp
-      - const: syscon
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6q-ocotp
+              - fsl,imx6sl-ocotp
+              - fsl,imx6sx-ocotp
+              - fsl,imx6ul-ocotp
+              - fsl,imx6ull-ocotp
+              - fsl,imx7d-ocotp
+              - fsl,imx6sll-ocotp
+              - fsl,imx7ulp-ocotp
+              - fsl,imx8mq-ocotp
+              - fsl,imx8mm-ocotp
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx8mn-ocotp
+              # i.MX8MP not really compatible with fsl,imx8mm-ocotp, however
+              # the code for getting SoC revision depends on fsl,imx8mm-ocotp
+              # compatible.
+              - fsl,imx8mp-ocotp
+          - const: fsl,imx8mm-ocotp
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -68,6 +76,8 @@ patternProperties:
 
     additionalProperties: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/imx6sx-clock.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
index b7c00ed31085..d5d7f113bade 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
@@ -36,6 +36,8 @@ dependencies:
   nvmem-names: [ nvmem ]
   nvmem-cell-names: [ nvmem-cells ]
 
+additionalProperties: true
+
 examples:
   - |
     tsens {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/nvmem.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index b459f9dba6c9..7481a9e48f19 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -67,6 +67,8 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
       #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 59aca6d22ff9..1a18b6bab35e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -49,6 +49,8 @@ required:
   - compatible
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
index 7bbd4e62044e..a835e64bc6f5 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -66,6 +66,8 @@ patternProperties:
 
     additionalProperties: false
 
+unevaluatedProperties: false
+
 examples:
   - |
       sdam_1: nvram@b000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
index 3ae00b0b23bc..104dd508565e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -51,6 +51,8 @@ required:
   - clocks
   - clock-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/rk3288-cru.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
deleted file mode 100644
index 3cb170896658..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D
-and i.MX7 Secure Non-Volatile Storage.
-
-This DT node should be represented as a sub-node of a "syscon",
-"simple-mfd" node.
-
-Required properties:
-- compatible: should be one of the fallowing variants:
-	"fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S
-	"fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL
-	"fsl,imx7d-snvs-lpgpr" for Freescale i.MX7D/S
-
-Example:
-snvs: snvs@020cc000 {
-	compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-	reg = <0x020cc000 0x4000>;
-
-	snvs_lpgpr: snvs-lpgpr {
-		compatible = "fsl,imx6q-snvs-lpgpr";
-	};
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
new file mode 100644
index 000000000000..c819f0e90320
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/snvs-lpgpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Low Power General Purpose Register found in i.MX Secure Non-Volatile Storage
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-snvs-lpgpr
+      - fsl,imx6ul-snvs-lpgpr
+      - fsl,imx7d-snvs-lpgpr
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    snvs@20cc000 {
+        compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+        reg = <0x20cc000 0x4000>;
+
+        snvs_lpgpr: snvs-lpgpr {
+            compatible = "fsl,imx6q-snvs-lpgpr";
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index c11c99f085d7..0b80ce22a2f8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -42,6 +42,8 @@ required:
   - compatible
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     efuse@1fff7800 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
index 56ed481c3e26..72ba628f6d0b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
@@ -2,7 +2,7 @@ On-Chip OTP Memory for Freescale Vybrid
 
 Required Properties:
   compatible:
-  - "fsl,vf610-ocotp" for VF5xx/VF6xx
+  - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
   #address-cells : Should be 1
   #size-cells : Should be 1
   reg : Address and length of OTP controller and fuse map registers
@@ -11,7 +11,7 @@ Required Properties:
 Example for Vybrid VF5xx/VF6xx:
 
 	ocotp: ocotp@400a5000 {
-		compatible = "fsl,vf610-ocotp";
+		compatible = "fsl,vf610-ocotp", "syscon";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x400a5000 0xCF0>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index aef87a33a7c9..aeff2bd774dd 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -31,6 +31,8 @@ properties:
       Documentation/devicetree/bindings/nvmem/nvmem.txt and also
       examples below.
 
+  opp-shared: true
+
 required:
   - compatible
   - nvmem-cells
@@ -53,7 +55,7 @@ patternProperties:
 
     unevaluatedProperties: false
 
-unevaluatedProperties: false
+additionalProperties: false
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/opp/opp.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/opp/opp.txt
index 9d16d417e9be..9847dfeeffcb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/opp/opp.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/opp/opp.txt
@@ -154,25 +154,27 @@ Optional properties:
 - opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
   in the table have this, the OPP with highest opp-hz will be used.
 
-- opp-supported-hw: This enables us to select only a subset of OPPs from the
-  larger OPP table, based on what version of the hardware we are running on. We
-  still can't have multiple nodes with the same opp-hz value in OPP table.
-
-  It's a user defined array containing a hierarchy of hardware version numbers,
-  supported by the OPP. For example: a platform with hierarchy of three levels
-  of versions (A, B and C), this field should be like <X Y Z>, where X
-  corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
-  corresponds to version hierarchy C.
-
-  Each level of hierarchy is represented by a 32 bit value, and so there can be
-  only 32 different supported version per hierarchy. i.e. 1 bit per version. A
-  value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
-  level. And a value of 0x00000000 will disable the OPP completely, and so we
-  never want that to happen.
-
-  If 32 values aren't sufficient for a version hierarchy, than that version
-  hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
-  above example, Z1 & Z2 refer to the version hierarchy Z.
+- opp-supported-hw: This property allows a platform to enable only a subset of
+  the OPPs from the larger set present in the OPP table, based on the current
+  version of the hardware (already known to the operating system).
+
+  Each block present in the array of blocks in this property, represents a
+  sub-group of hardware versions supported by the OPP. i.e. <sub-group A>,
+  <sub-group B>, etc. The OPP will be enabled if _any_ of these sub-groups match
+  the hardware's version.
+
+  Each sub-group is a platform defined array representing the hierarchy of
+  hardware versions supported by the platform. For a platform with three
+  hierarchical levels of version (X.Y.Z), this field shall look like
+
+  opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
+
+  Each level (eg. X1) in version hierarchy is represented by a 32 bit value, one
+  bit per version and so there can be maximum 32 versions per level. Logical AND
+  (&) operation is performed for each level with the hardware's level version
+  and a non-zero output for _all_ the levels in a sub-group means the OPP is
+  supported by hardware. A value of 0xFFFFFFFF for each level in the sub-group
+  will enable the OPP for all versions for the hardware.
 
 - status: Marks the node enabled/disabled.
 
@@ -503,7 +505,6 @@ Example 5: opp-supported-hw
 			 */
 			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <915000 900000 925000>;
 			...
 		};
 
@@ -516,7 +517,17 @@ Example 5: opp-supported-hw
 			 */
 			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <915000 900000 925000>;
+			...
+		};
+
+		opp-900000000 {
+			/*
+			 * Supports:
+			 * - All cuts and substrate where process version is 0x2.
+			 * - All cuts and process where substrate version is 0x2.
+			 */
+			opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, <0xFFFFFFFF 0x01 0xFFFFFFFF>
+			opp-hz = /bits/ 64 <900000000>;
 			...
 		};
 	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 8680a0f86c5a..807694b4f41f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
 maintainers:
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
 
   reg:
     maxItems: 1
@@ -34,10 +37,12 @@ properties:
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   dma-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 6
 
   clocks:
     maxItems: 1
@@ -58,8 +63,31 @@ properties:
 
   aspm-no-l0s: true
 
+  resets:
+    description: for "brcm,bcm7216-pcie", must be a valid reset
+      phandle pointing to the RESCAL reset controller provider node.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  reset-names:
+    items:
+      - const: rescal
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    items:
+      minItems: 1
+      maxItems: 3
+
 required:
   - reg
+  - ranges
   - dma-ranges
   - "#interrupt-cells"
   - interrupts
@@ -68,6 +96,18 @@ required:
   - interrupt-map
   - msi-controller
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-pcie
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
@@ -93,7 +133,9 @@ examples:
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
+                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
             };
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
index 50ce5d79d2c7..651eee88989d 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -29,6 +29,8 @@ required:
   - reg
   - reg-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     bus {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
index 6d67067843bf..293b8ec318bc 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -31,6 +31,8 @@ required:
   - reg
   - reg-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     bus {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
index 016a5f61592d..60b8baf299bb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -22,3 +22,5 @@ properties:
 
 required:
   - cdns,max-outbound-regions
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
index 303078a7b7a8..a944f9bfffff 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -33,3 +33,5 @@ properties:
     deprecated: true
 
   msi-parent: true
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns-pcie.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
index 02553d5e6c51..df4fe28222b0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -21,3 +21,5 @@ properties:
     items:
       - const: pcie-phy
     # FIXME: names when more than 1
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/host-generic-pci.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
index 47353d0cd394..6bcaa8f2c3cf 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -137,6 +137,8 @@ allOf:
         reg:
           maxItems: 1
 
+unevaluatedProperties: false
+
 examples:
   - |
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/layerscape-pci.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 99a386ea691c..daa99f7d4c3f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -24,6 +24,8 @@ Required properties:
         "fsl,ls1028a-pcie"
   EP mode:
 	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/loongson.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/loongson.yaml
index 30e7cf1aeb87..81bae060cbde 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/loongson.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -39,6 +39,8 @@ required:
   - reg
   - ranges
 
+unevaluatedProperties: false
+
 examples:
   - |
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml
index 0f8e575ac01a..7847bbcd4a03 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -36,3 +36,5 @@ properties:
 
 required:
   - compatible
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
index aa483c7f27fd..84eeb7fe6e01 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
@@ -14,8 +14,12 @@ maintainers:
 properties:
   compatible:
     items:
-      - const: renesas,r8a774c0-pcie-ep
-      - const: renesas,rcar-gen3-pcie-ep
+      - enum:
+          - renesas,r8a774a1-pcie-ep     # RZ/G2M
+          - renesas,r8a774b1-pcie-ep     # RZ/G2N
+          - renesas,r8a774c0-pcie-ep     # RZ/G2E
+          - renesas,r8a774e1-pcie-ep     # RZ/G2H
+      - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2
 
   reg:
     maxItems: 5
@@ -55,6 +59,8 @@ required:
   - clock-names
   - max-functions
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/rcar-pci.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 1041c44a614f..14d307deff06 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -1,7 +1,8 @@
 * Renesas R-Car PCIe interface
 
 Required properties:
-compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+compatible: "renesas,pcie-r8a7742" for the R8A7742 SoC;
+	    "renesas,pcie-r8a7743" for the R8A7743 SoC;
 	    "renesas,pcie-r8a7744" for the R8A7744 SoC;
 	    "renesas,pcie-r8a774a1" for the R8A774A1 SoC;
 	    "renesas,pcie-r8a774b1" for the R8A774B1 SoC;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
index f0558b9cf9e9..d6cf8a560ef0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -23,14 +23,22 @@ properties:
     const: socionext,uniphier-pro5-pcie-ep
 
   reg:
-    maxItems: 4
+    minItems: 4
+    maxItems: 5
 
   reg-names:
-    items:
-      - const: dbi
-      - const: dbi2
-      - const: link
-      - const: addr_space
+    oneOf:
+      - items:
+          - const: dbi
+          - const: dbi2
+          - const: link
+          - const: addr_space
+      - items:
+          - const: dbi
+          - const: dbi2
+          - const: link
+          - const: addr_space
+          - const: atu
 
   clocks:
     maxItems: 2
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
index b3c3d0c3c390..3ae3e1a2d4b0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -63,6 +63,8 @@ required:
   - phys
   - phy-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index 8200ba00bc09..ee7a8eade3f6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -72,6 +72,8 @@ required:
   - phys
   - phy-names
 
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/uniphier-pcie.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
index 1fa2c5906d4d..c4b7381733a0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
@@ -16,6 +16,7 @@ Required properties:
     "dbi"    - controller configuration registers
     "link"   - SoC-specific glue layer registers
     "config" - PCIe configuration space
+    "atu"    - iATU registers for DWC version 4.80 or later
 - clocks: A phandle to the clock gate for PCIe glue layer including
 	the host controller.
 - resets: A phandle to the reset line for PCIe glue layer including
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/versatile.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/versatile.yaml
index 07a48c27db1f..09748ef6b94f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pci/versatile.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pci/versatile.yaml
@@ -48,6 +48,8 @@ required:
   - interrupt-map
   - interrupt-map-mask
 
+unevaluatedProperties: false
+
 examples:
   - |
     pci@10001000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/perf/arm,cmn.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/perf/arm,cmn.yaml
new file mode 100644
index 000000000000..e4fcc0de25e2
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/perf/arm,cmn.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,cmn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CMN (Coherent Mesh Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    const: arm,cmn-600
+
+  reg:
+    items:
+      - description: Physical address of the base (PERIPHBASE) and
+          size (up to 64MB) of the configuration address space.
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    items:
+      - description: Overflow interrupt for DTC0
+      - description: Overflow interrupt for DTC1
+      - description: Overflow interrupt for DTC2
+      - description: Overflow interrupt for DTC3
+    description: One interrupt for each DTC domain implemented must
+      be specified, in order. DTC0 is always present.
+
+  arm,root-node:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset from PERIPHBASE of the configuration
+      discovery node (see TRM definition of ROOTNODEBASE).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - arm,root-node
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmu@50000000 {
+        compatible = "arm,cmn-600";
+        reg = <0x50000000 0x4000000>;
+        /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        arm,root-node = <0x104000>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
deleted file mode 100644
index 7822a806ea0a..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Freescale(NXP) IMX8 DDR performance monitor
-
-Required properties:
-
-- compatible: should be one of:
-	"fsl,imx8-ddr-pmu"
-	"fsl,imx8m-ddr-pmu"
-	"fsl,imx8mp-ddr-pmu"
-
-- reg: physical address and size
-
-- interrupts: single interrupt
-	generated by the control block
-
-Example:
-
-	ddr-pmu@5c020000 {
-		compatible = "fsl,imx8-ddr-pmu";
-		reg = <0x5c020000 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
new file mode 100644
index 000000000000..5aad9f4e0b2a
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale(NXP) IMX8 DDR performance monitor
+
+maintainers:
+  - Frank Li <frank.li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8-ddr-pmu
+          - fsl,imx8m-ddr-pmu
+          - fsl,imx8mp-ddr-pmu
+      - items:
+          - enum:
+              - fsl,imx8mm-ddr-pmu
+              - fsl,imx8mn-ddr-pmu
+              - fsl,imx8mq-ddr-pmu
+              - fsl,imx8mp-ddr-pmu
+          - const: fsl,imx8m-ddr-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ddr-pmu@5c020000 {
+        compatible = "fsl,imx8-ddr-pmu";
+        reg = <0x5c020000 0x10000>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
index 0d2557bb0bcc..399ebde45409 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
@@ -63,6 +63,8 @@ then:
   required:
     - power-domains
 
+additionalProperties: false
+
 examples:
   - |
     phy@36000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
index ed47e5cd067e..7c70f2ad9942 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
@@ -1,7 +1,7 @@
 * Freescale i.MX8MQ USB3 PHY binding
 
 Required properties:
-- compatible:	Should be "fsl,imx8mq-usb-phy"
+- compatible:	Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy"
 - #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
 - reg:		The base address and length of the registers
 - clocks:	phandles to the clocks for each clock listed in clock-names
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
new file mode 100644
index 000000000000..c2e073e26190
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3660-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin 960 USB PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+description: |+
+  Bindings for USB3 PHY on HiSilicon Kirin 960.
+
+properties:
+  compatible:
+    const: hisilicon,hi3660-usb-phy
+
+  "#phy-cells":
+    const: 0
+
+  hisilicon,pericrg-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control iso refclk.
+
+  hisilicon,pctrl-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control usb tcxo.
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Eye diagram for phy.
+
+required:
+  - compatible
+  - hisilicon,pericrg-syscon
+  - hisilicon,pctrl-syscon
+  - hisilicon,eye-diagram-param
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usb3_otg_bc: usb3_otg_bc@ff200000 {
+        compatible = "syscon", "simple-mfd";
+        reg = <0x0 0xff200000 0x0 0x1000>;
+
+        usb-phy {
+          compatible = "hisilicon,hi3660-usb-phy";
+          #phy-cells = <0>;
+          hisilicon,pericrg-syscon = <&crg_ctrl>;
+          hisilicon,pctrl-syscon = <&pctrl>;
+          hisilicon,eye-diagram-param = <0x22466e4>;
+        };
+      };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 77bb5309918e..edd9d70a672a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -23,7 +23,9 @@ description: |+
 
 properties:
   compatible:
-    const: intel,lgm-emmc-phy
+    oneOf:
+      - const: intel,lgm-emmc-phy
+      - const: intel,keembay-emmc-phy
 
   "#phy-cells":
     const: 0
@@ -34,6 +36,10 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: emmcclk
+
 required:
   - "#phy-cells"
   - compatible
@@ -57,4 +63,13 @@ examples:
         #phy-cells = <0>;
       };
     };
+
+  - |
+    phy@20290000 {
+          compatible = "intel,keembay-emmc-phy";
+          reg = <0x20290000 0x54>;
+          clocks = <&emmc>;
+          clock-names = "emmcclk";
+          #phy-cells = <0>;
+    };
 ...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
new file mode 100644
index 000000000000..ce62c0b94daf
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM USB PHY Device Tree Bindings
+
+maintainers:
+  - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: USB PHY and Host controller reset
+      - description: APB BUS reset
+      - description: General Hardware reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+      - const: phy31
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@e7e00000 {
+        compatible = "intel,lgm-usb-phy";
+        reg = <0xe7e00000 0x10000>;
+        clocks = <&cgu0 153>;
+        resets = <&rcu 0x70 0x24>,
+                 <&rcu 0x70 0x26>,
+                 <&rcu 0x70 0x28>;
+        reset-names = "phy", "apb", "phy31";
+        #phy-cells = <0>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index 4071438be2ba..e266ade53d87 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -4,11 +4,13 @@
 $id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Cadence Torrent SD0801 PHY binding for DisplayPort
+title: Cadence Torrent SD0801 PHY binding
 
 description:
   This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
-  hardware included with the Cadence MHDP DisplayPort controller.
+  hardware included with the Cadence MHDP DisplayPort controller. Torrent
+  PHY also supports multilink multiprotocol combinations including protocols
+  such as PCIe, USB, SGMII, QSGMII etc.
 
 maintainers:
   - Swapnil Jakhade <sjakhade@cadence.com>
@@ -49,13 +51,21 @@ properties:
       - const: dptx_phy
 
   resets:
-    maxItems: 1
-    description:
-      Torrent PHY reset.
-      See Documentation/devicetree/bindings/reset/reset.txt
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Torrent PHY reset.
+      - description: Torrent APB reset. This is optional.
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: torrent_reset
+      - const: torrent_apb
 
 patternProperties:
-  '^phy@[0-7]+$':
+  '^phy@[0-3]$':
     type: object
     description:
       Each group of PHY lanes with a single master lane should be represented as a sub-node.
@@ -63,6 +73,8 @@ patternProperties:
       reg:
         description:
           The master lane number. This is the lowest numbered lane in the lane group.
+        minimum: 0
+        maximum: 3
 
       resets:
         minItems: 1
@@ -78,15 +90,25 @@ patternProperties:
           Specifies the type of PHY for which the group of PHY lanes is used.
           Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 3, 4, 5, 6]
+        minimum: 1
+        maximum: 9
 
       cdns,num-lanes:
         description:
-          Number of DisplayPort lanes.
+          Number of lanes.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 4]
+        enum: [1, 2, 3, 4]
         default: 4
 
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
       cdns,max-bit-rate:
         description:
           Maximum DisplayPort link bit rate to use, in Mbps
@@ -99,6 +121,7 @@ patternProperties:
       - resets
       - "#phy-cells"
       - cdns,phy-type
+      - cdns,num-lanes
 
     additionalProperties: false
 
@@ -111,6 +134,7 @@ required:
   - reg
   - reg-names
   - resets
+  - reset-names
 
 additionalProperties: false
 
@@ -128,18 +152,56 @@ examples:
                   <0xf0 0xfb030a00 0x0 0x00000040>;
             reg-names = "torrent_phy", "dptx_phy";
             resets = <&phyrst 0>;
+            reset-names = "torrent_reset";
             clocks = <&ref_clk>;
             clock-names = "refclk";
             #address-cells = <1>;
             #size-cells = <0>;
             phy@0 {
-                      reg = <0>;
-                      resets = <&phyrst 1>, <&phyrst 2>,
-                               <&phyrst 3>, <&phyrst 4>;
-                      #phy-cells = <0>;
-                      cdns,phy-type = <PHY_TYPE_DP>;
-                      cdns,num-lanes = <4>;
-                      cdns,max-bit-rate = <8100>;
+                reg = <0>;
+                resets = <&phyrst 1>, <&phyrst 2>,
+                         <&phyrst 3>, <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_DP>;
+                cdns,num-lanes = <4>;
+                cdns,max-bit-rate = <8100>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/phy/phy-cadence-torrent.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        torrent-phy@f0fb500000 {
+            compatible = "cdns,torrent-phy";
+            reg = <0xf0 0xfb500000 0x0 0x00100000>;
+            reg-names = "torrent_phy";
+            resets = <&phyrst 0>, <&phyrst 1>;
+            reset-names = "torrent_reset", "torrent_apb";
+            clocks = <&ref_clk>;
+            clock-names = "refclk";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy@0 {
+                reg = <0>;
+                resets = <&phyrst 2>, <&phyrst 3>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+                cdns,num-lanes = <2>;
+                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
+            };
+
+            phy@2 {
+                reg = <2>;
+                resets = <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_SGMII>;
+                cdns,num-lanes = <1>;
+                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
             };
         };
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
deleted file mode 100644
index e88ba7d92dcb..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Hisilicon hi3660 USB PHY
------------------------
-
-Required properties:
-- compatible: should be "hisilicon,hi3660-usb-phy"
-- #phy-cells: must be 0
-- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
-- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
-- hisilicon,eye-diagram-param: parameter set for phy
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-This is a subnode of usb3_otg_bc register node.
-
-Example:
-	usb3_otg_bc: usb3_otg_bc@ff200000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0xff200000 0x0 0x1000>;
-
-		usb-phy {
-			compatible = "hisilicon,hi3660-usb-phy";
-			#phy-cells = <0>;
-			hisilicon,pericrg-syscon = <&crg_ctrl>;
-			hisilicon,pctrl-syscon = <&pctrl>;
-			hisilicon,eye-diagram-param = <0x22466e4>;
-		};
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt
deleted file mode 100644
index 744b4809542e..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-STMicroelectronics STiH41x USB PHY binding
-------------------------------------------
-
-This file contains documentation for the usb phy found in STiH415/6 SoCs from
-STMicroelectronics.
-
-Required properties:
-- compatible	: should be "st,stih416-usb-phy" or "st,stih415-usb-phy"
-- st,syscfg	: should be a phandle of the syscfg node
-- clock-names	: must contain "osc_phy"
-- clocks	: must contain an entry for each name in clock-names.
-See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- #phy-cells	: must be 0 for this phy
-See: Documentation/devicetree/bindings/phy/phy-bindings.txt
-
-Example:
-
-usb2_phy: usb2phy@0 {
-	compatible	= "st,stih416-usb-phy";
-	#phy-cells	= <0>;
-	st,syscfg	= <&syscfg_rear>;
-	clocks		= <&clk_sysin>;
-	clock-names	= "osc_phy";
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
index 23887ebe08fd..17f132ce5516 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
@@ -42,6 +42,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
index fa30c24b4405..17fd7f6b83bb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
@@ -60,6 +60,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index ef8ae9f73092..33974ad10afe 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -13,17 +13,21 @@ maintainers:
 properties:
   compatible:
     enum:
+      - qcom,sc7180-qmp-usb3-dp-phy
       - qcom,sc7180-qmp-usb3-phy
+      - qcom,sdm845-qmp-usb3-dp-phy
       - qcom,sdm845-qmp-usb3-phy
   reg:
     items:
-      - description: Address and length of PHY's common serdes block.
+      - description: Address and length of PHY's USB serdes block.
       - description: Address and length of the DP_COM control block.
+      - description: Address and length of PHY's DP serdes block.
 
   reg-names:
     items:
-      - const: reg-base
+      - const: usb
       - const: dp_com
+      - const: dp
 
   "#clock-cells":
     enum: [ 1, 2 ]
@@ -74,16 +78,74 @@ properties:
 
 #Required nodes:
 patternProperties:
-  "^phy@[0-9a-f]+$":
+  "^usb3-phy@[0-9a-f]+$":
     type: object
     description:
-      Each device node of QMP phy is required to have as many child nodes as
-      the number of lanes the PHY has.
+      The USB3 PHY.
+
+    properties:
+      reg:
+        items:
+          - description: Address and length of TX.
+          - description: Address and length of RX.
+          - description: Address and length of PCS.
+          - description: Address and length of TX2.
+          - description: Address and length of RX2.
+          - description: Address and length of pcs_misc.
+
+      clocks:
+        items:
+          - description: pipe clock
+
+      clock-names:
+        items:
+          - const: pipe0
+
+      clock-output-names:
+        items:
+          - const: usb3_phy_pipe_clk_src
+
+      '#clock-cells':
+        const: 0
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - '#clock-cells'
+      - '#phy-cells'
+
+  "^dp-phy@[0-9a-f]+$":
+    type: object
+    description:
+      The DP PHY.
+
+    properties:
+      reg:
+        items:
+          - description: Address and length of TX.
+          - description: Address and length of RX.
+          - description: Address and length of PCS.
+          - description: Address and length of TX2.
+          - description: Address and length of RX2.
+
+      '#clock-cells':
+        const: 1
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - reg
+      - '#clock-cells'
+      - '#phy-cells'
 
 required:
   - compatible
   - reg
-  - reg-names
   - "#clock-cells"
   - "#address-cells"
   - "#size-cells"
@@ -101,14 +163,15 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
     usb_1_qmpphy: phy-wrapper@88e9000 {
-        compatible = "qcom,sdm845-qmp-usb3-phy";
+        compatible = "qcom,sdm845-qmp-usb3-dp-phy";
         reg = <0x088e9000 0x18c>,
-              <0x088e8000 0x10>;
-        reg-names = "reg-base", "dp_com";
+              <0x088e8000 0x10>,
+              <0x088ea000 0x40>;
+        reg-names = "usb", "dp_com", "dp";
         #clock-cells = <1>;
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges = <0x0 0x088e9000 0x1000>;
+        ranges = <0x0 0x088e9000 0x2000>;
 
         clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
                  <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@@ -123,7 +186,7 @@ examples:
         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
         vdda-pll-supply = <&vdda_usb2_ss_core>;
 
-        phy@200 {
+        usb3-phy@200 {
             reg = <0x200 0x128>,
                   <0x400 0x200>,
                   <0xc00 0x218>,
@@ -136,4 +199,14 @@ examples:
             clock-names = "pipe0";
             clock-output-names = "usb3_phy_pipe_clk_src";
         };
+
+        dp-phy@88ea200 {
+            reg = <0xa200 0x200>,
+                  <0xa400 0x200>,
+                  <0xaa00 0x200>,
+                  <0xa600 0x200>,
+                  <0xa800 0x200>;
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index ccda92859eca..d457fb6a4779 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -158,6 +158,7 @@ required:
   - vdda-phy-dpdm-supply
   - resets
 
+additionalProperties: false
 
 examples:
   - |
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
index 1118fe69b611..3e7191b168fb 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
@@ -36,6 +36,8 @@ required:
   - reset-names
   - "#phy-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
new file mode 100644
index 000000000000..34756347a14e
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier AHCI PHY
+
+description: |
+  This describes the deivcetree bindings for PHY interfaces built into
+  AHCI controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pxs2-ahci-phy
+      - socionext,uniphier-pxs3-ahci-phy
+
+  reg:
+    description: PHY register region (offset and length)
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:          # for PXs2
+          - const: link
+      - items:          # for others
+          - const: link
+          - const: phy
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: link
+      - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ahci-glue@65700000 {
+        compatible = "socionext,uniphier-pxs3-ahci-glue",
+                     "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65700000 0x100>;
+
+        ahci_phy: phy@10 {
+            compatible = "socionext,uniphier-pxs3-ahci-phy";
+            reg = <0x10 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 28>, <&sys_clk 30>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 28>, <&sys_rst 30>;
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
new file mode 100644
index 000000000000..83d5d0aceb04
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP USB2 PHY
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+  - Roger Quadros <rogerq@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,dra7x-usb2
+              - ti,dra7x-usb2-phy2
+              - ti,am654-usb2
+          - enum:
+              - ti,omap-usb2
+      - items:
+          - const: ti,am437x-usb2
+      - items:
+          - const: ti,omap-usb2
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    items:
+      - description: wakeup clock
+      - description: reference clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: wkupclk
+      - const: refclk
+
+  syscon-phy-power:
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    description:
+      phandle/offset pair. Phandle to the system control module and
+      register offset to power on/off the PHY.
+
+  ctrl-module:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      (deprecated) phandle of the control module used by PHY driver
+      to power on the PHY. Use syscon-phy-power instead.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    usb0_phy: phy@4100000 {
+      compatible = "ti,am654-usb2", "ti,omap-usb2";
+      reg = <0x4100000 0x54>;
+      syscon-phy-power = <&scm_conf 0x4000>;
+      clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+      clock-names = "wkupclk", "refclk";
+      #phy-cells = <0>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 5ffc95c62909..c33e9bc79521 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -45,9 +45,15 @@ properties:
   ranges: true
 
   assigned-clocks:
+    minItems: 1
     maxItems: 2
 
   assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-rates:
+    minItems: 1
     maxItems: 2
 
   typec-dir-gpios:
@@ -119,9 +125,10 @@ patternProperties:
       logic.
     properties:
       clocks:
+        minItems: 2
         maxItems: 4
-        description: Phandle to four clock nodes representing the inputs to
-          refclk_dig
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
 
       "#clock-cells":
         const: 0
@@ -203,7 +210,7 @@ examples:
            };
 
            refclk-dig {
-                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, 
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
                           <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
                   #clock-cells = <0>;
                   assigned-clocks = <&wiz0_refclk_dig>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/ti-phy.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/ti-phy.txt
index 8f93c3b694a7..60c9d0ac75e6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 {
         reg-names = "otghs_control";
 };
 
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
-	       Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
-	       DRA7x
-	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
-	       in DRA7x
-	       Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
-   clock-names.
- - clock-names: should include:
-   * "wkupclk" - wakeup clock.
-   * "refclk" - reference clock (optional).
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-Recommended properies:
-- syscon-phy-power : phandle/offset pair. Phandle to the system control
-  module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
-	compatible = "ti,omap-usb2";
-	reg = <0x4a0ad080 0x58>;
-	ctrl-module = <&omap_control_usb>;
-	#phy-cells = <0>;
-	clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
-	clock-names = "wkupclk", "refclk";
-};
-
 TI PIPE3 PHY
 
 Required properties:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
new file mode 100644
index 000000000000..ccdd9e3820d7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi S500 SoC pinmux & GPIO controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  Pinmux & GPIO controller manages pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration. Please refer to
+  pinctrl-bindings.txt in this directory for common binding part and usage.
+
+properties:
+  compatible:
+    const: actions,s500-pinctrl
+
+  reg:
+    items:
+      - description: GPIO Output + GPIO Input + GPIO Data
+      - description: Multiplexing Control
+      - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
+      - description: PAD Drive Capacity Select
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  interrupts:
+    description:
+      One interrupt per each of the 5 GPIO ports supported by the controller,
+      sorted by port number ascending order.
+    minItems: 5
+    maxItems: 5
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin muxes using subnodes,
+          which in turn use the standard properties below.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the functions specified in
+              this subnode.
+            items:
+              oneOf:
+                - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
+                         rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
+                         rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
+                         i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
+                         ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
+                         ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+                         dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
+                         dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
+                         spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
+                         dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+                         uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+                         sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+                         uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+                         uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
+                         pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
+                         dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
+                         nand_ceb3_mfp]
+            minItems: 1
+            maxItems: 32
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given gpio pin groups.
+            enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+                   sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
+                   i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                   p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
+                   mipi_csi, nand, spdif, ts, lcd0]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^(.*-)?pinconf$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin configurations using
+          subnodes, which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the drive-strength property
+              specified in this subnode.
+            items:
+              oneOf:
+                - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
+                         rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
+                         smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
+                         i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
+                         lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
+                         sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
+                         spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+                         i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
+                         sens0_ckout_drv, uart3_all_drv]
+            minItems: 1
+            maxItems: 32
+
+          pins:
+            description:
+              List of gpio pins affected by the bias-pull-* and
+              input-schmitt-* properties specified in this subnode.
+            items:
+              oneOf:
+                - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
+                         eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
+                         eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+                         i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
+                         i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
+                         ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+                         lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
+                         lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
+                         lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
+                         dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
+                         dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
+                         sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+                         spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+                         uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
+                         sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
+                         dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
+                         uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
+                         pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
+                         i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
+                         csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+                         csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
+                         dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
+                         dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
+                         pkg2, pkg3]
+            minItems: 1
+            maxItems: 64
+
+          bias-pull-up: true
+          bias-pull-down: true
+
+          drive-strength:
+            description:
+              Selects the drive strength for the specified pins, in mA.
+            enum: [2, 4, 8, 12]
+
+          input-schmitt-enable: true
+          input-schmitt-disable: true
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - gpio-ranges
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl@b01b0000 {
+        compatible = "actions,s500-pinctrl";
+        reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
+              <0xb01b0060 0x18>, <0xb01b0080 0xc>;
+        clocks = <&cmu 55>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 132>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        mmc0_pins: mmc0-pins {
+            pinmux {
+                groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+                         "sd0_cmd_mfp", "sd0_clk_mfp";
+                function = "sd0";
+            };
+
+            drv-pinconf {
+                groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+                drive-strength = <8>;
+            };
+
+            bias-pinconf {
+                pins = "sd0_d0", "sd0_d1", "sd0_d2",
+                       "sd0_d3", "sd0_cmd";
+                bias-pull-up;
+            };
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index 7556be6e2754..5240487dfe50 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -48,6 +48,8 @@ properties:
       - allwinner,sun9i-a80-r-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
+      - allwinner,sun50i-a100-pinctrl
+      - allwinner,sun50i-a100-r-pinctrl
       - allwinner,sun50i-h5-pinctrl
       - allwinner,sun50i-h6-pinctrl
       - allwinner,sun50i-h6-r-pinctrl
@@ -59,7 +61,7 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 5
+    maxItems: 7
     description:
       One interrupt per external interrupt bank supported on the
       controller, sorted by bank number ascending order.
@@ -143,6 +145,18 @@ allOf:
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun50i-a100-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
   - if:
       properties:
         compatible:
@@ -155,62 +169,75 @@ allOf:
           minItems: 5
           maxItems: 5
 
-    else:
-      if:
-        properties:
-          compatible:
-            enum:
-              - allwinner,sun6i-a31-pinctrl
-              - allwinner,sun6i-a31s-pinctrl
-              - allwinner,sun50i-h6-pinctrl
-
-      then:
-        properties:
-          interrupts:
-            minItems: 4
-            maxItems: 4
-
-      else:
-        if:
-          properties:
-            compatible:
-              enum:
-                - allwinner,sun8i-a23-pinctrl
-                - allwinner,sun8i-a83t-pinctrl
-                - allwinner,sun50i-a64-pinctrl
-                - allwinner,sun50i-h5-pinctrl
-                - allwinner,suniv-f1c100s-pinctrl
-
-        then:
-          properties:
-            interrupts:
-              minItems: 3
-              maxItems: 3
-
-        else:
-          if:
-            properties:
-              compatible:
-                enum:
-                  - allwinner,sun6i-a31-r-pinctrl
-                  - allwinner,sun8i-a33-pinctrl
-                  - allwinner,sun8i-h3-pinctrl
-                  - allwinner,sun8i-v3-pinctrl
-                  - allwinner,sun8i-v3s-pinctrl
-                  - allwinner,sun9i-a80-r-pinctrl
-                  - allwinner,sun50i-h6-r-pinctrl
-
-          then:
-            properties:
-              interrupts:
-                minItems: 2
-                maxItems: 2
-
-          else:
-            properties:
-              interrupts:
-                minItems: 1
-                maxItems: 1
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-pinctrl
+            - allwinner,sun6i-a31s-pinctrl
+            - allwinner,sun50i-h6-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-a23-pinctrl
+            - allwinner,sun8i-a83t-pinctrl
+            - allwinner,sun50i-a64-pinctrl
+            - allwinner,sun50i-h5-pinctrl
+            - allwinner,suniv-f1c100s-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-r-pinctrl
+            - allwinner,sun8i-a33-pinctrl
+            - allwinner,sun8i-h3-pinctrl
+            - allwinner,sun8i-v3-pinctrl
+            - allwinner,sun8i-v3s-pinctrl
+            - allwinner,sun9i-a80-r-pinctrl
+            - allwinner,sun50i-h6-r-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun4i-a10-pinctrl
+            - allwinner,sun5i-a10s-pinctrl
+            - allwinner,sun5i-a13-pinctrl
+            - allwinner,sun7i-a20-pinctrl
+            - allwinner,sun8i-a23-r-pinctrl
+            - allwinner,sun8i-a83t-r-pinctrl
+            - allwinner,sun8i-h3-r-pinctrl
+            - allwinner,sun8i-r40-pinctrl
+            - allwinner,sun50i-a64-r-pinctrl
+            - allwinner,sun50i-a100-r-pinctrl
+            - nextthing,gr8-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
 
 additionalProperties: false
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index 04d16fb69eb7..265015bc0603 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -4,7 +4,9 @@ The Atmel PIO4 controller is used to select the function of a pin and to
 configure it.
 
 Required properties:
-- compatible: "atmel,sama5d2-pinctrl".
+- compatible:
+	"atmel,sama5d2-pinctrl"
+	"microchip,sama7g5-pinctrl"
 - reg: base address and length of the PIO controller.
 - interrupts: interrupt outputs from the controller, one for each bank.
 - interrupt-controller: mark the device node as an interrupt controller.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
index 420d74856032..a07dd197176a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -188,3 +188,5 @@ required:
   - gpio-ranges
   - pinctrl-0
   - pinctrl-names
+
+additionalProperties: false
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
index 6bfc25d0e1b3..4cb174bf31ff 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -120,3 +120,5 @@ properties:
 required:
   - pinctrl-0
   - pinctrl-names
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
index 13b7ab9dd6d5..71ed0a9def84 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -138,3 +138,5 @@ properties:
       and the delay before latching a value to an output
       pin. Typically indicates how many double-inverters are
       used to delay the signal.
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
index bf9b07016c87..fbdd1a716a1e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
@@ -60,7 +60,7 @@ For example, pinctrl might have properties like the following:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes.
+SiRFatlas7's pinmux nodes act as a container for an arbitrary number of subnodes.
 Each of these subnodes represents some desired configuration for a group of pins.
 
 Required subnode-properties:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
index 205be98ae078..931a18cd1e23 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
@@ -10,6 +10,7 @@ Required properties:
 	"mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl.
 	"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
 	"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
+	"mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl.
 	"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
 	"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
 - pins-are-numbered: Specify the subnodes are using numbered pinmux to
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
new file mode 100644
index 000000000000..c4c071211611
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8192 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8192-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: gpio valid number range.
+    maxItems: 1
+
+  reg:
+    description: |
+      Physical address base for gpio base registers. There are 11 GPIO
+      physical address base in mt8192.
+    maxItems: 11
+
+  reg-names:
+    description: |
+      Gpio base register names.
+    maxItems: 11
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^pins':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pinctrl groups available on the machine. Each subnode will list the
+      pins it needs, and how they should be configured, with regard to muxer
+      configuration, pullups, drive strength, input enable/disable and
+      input schmitt.
+      An example of using macro:
+      pincontroller {
+        /* GPIO0 set as multifunction GPIO0 */
+        state_0_node_a {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+        };
+        /* GPIO1 set as multifunction PWM */
+        state_0_node_b {
+          pinmux = <PINMUX_GPIO1__FUNC_PWM_1>;
+        };
+      };
+    $ref: "pinmux-node.yaml"
+
+    properties:
+      pinmux:
+        description: |
+          Integer array, represents gpio pin number and mux setting.
+          Supported pin number and mux varies for different SoCs, and are defined
+          as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+      drive-strength:
+        description: |
+          It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
+          dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      input-enable: true
+
+      input-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+            #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+            #include <dt-bindings/interrupt-controller/arm-gic.h>
+            pio: pinctrl@10005000 {
+                    compatible = "mediatek,mt8192-pinctrl";
+                    reg = <0x10005000 0x1000>,
+                          <0x11c20000 0x1000>,
+                          <0x11d10000 0x1000>,
+                          <0x11d30000 0x1000>,
+                          <0x11d40000 0x1000>,
+                          <0x11e20000 0x1000>,
+                          <0x11e70000 0x1000>,
+                          <0x11ea0000 0x1000>,
+                          <0x11f20000 0x1000>,
+                          <0x11f30000 0x1000>,
+                          <0x1000b000 0x1000>;
+                    reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+                          "iocfg_bl", "iocfg_br", "iocfg_lm",
+                          "iocfg_lb", "iocfg_rt", "iocfg_lt",
+                          "iocfg_tl", "eint";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pio 0 0 220>;
+                    interrupt-controller;
+                    interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+                    #interrupt-cells = <2>;
+
+                    pins {
+                      pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+                      output-low;
+                    };
+            };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index e705acd3612c..f903eb4471f8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -94,16 +94,23 @@ pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
 specified in the pinctrl-bindings.txt document in this directory.
 
 The pin configuration nodes for pinctrl-single are specified as pinctrl
-register offset and value pairs using pinctrl-single,pins. Only the bits
-specified in pinctrl-single,function-mask are updated. For example, setting
-a pin for a device could be done with:
+register offset and values using pinctrl-single,pins. Only the bits specified
+in pinctrl-single,function-mask are updated.
+
+When #pinctrl-cells = 1, then setting a pin for a device could be done with:
 
 	pinctrl-single,pins = <0xdc 0x118>;
 
-Where 0xdc is the offset from the pinctrl register base address for the
-device pinctrl register, and 0x118 contains the desired value of the
-pinctrl register. See the device example and static board pins example
-below for more information.
+Where 0xdc is the offset from the pinctrl register base address for the device
+pinctrl register, and 0x118 contains the desired value of the pinctrl register.
+
+When #pinctrl-cells = 2, then setting a pin for a device could be done with:
+
+	pinctrl-single,pins = <0xdc 0x30 0x07>;
+
+Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value.
+These two values are OR'd together to produce the value stored at offset 0xdc.
+See the device example and static board pins example below for more information.
 
 In case when one register changes more than one pin's mux the
 pinctrl-single,bits need to be used which takes three parameters:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
index ef8877ddb1eb..551df3d9b809 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
@@ -129,3 +129,5 @@ properties:
 
   pinctrl-pin-array:
     $ref: /schemas/types.yaml#/definitions/uint32-array
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index 0861afeccfc9..97858a7c07a2 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -26,7 +26,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 000000000000..040d2ada3669
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  MSM8226 platform.
+
+properties:
+  compatible:
+    const: qcom,msm8226-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+                blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+                blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        msmgpio: pinctrl@fd510000 {
+                compatible = "qcom,msm8226-pinctrl";
+                reg = <0xfd510000 0x4000>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&msmgpio 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+                serial-pins {
+                        pins = "gpio8", "gpio9";
+                        function = "blsp_uart3";
+                        drive-strength = <8>;
+                        bias-disable;
+                };
+        };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
deleted file mode 100644
index d75476e24514..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ /dev/null
@@ -1,188 +0,0 @@
-* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
-
-The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0,
-R8A73A4 and R8A7740 it also acts as a GPIO controller.
-
-
-Pin Control
------------
-
-Required Properties:
-
-  - compatible: should be one of the following.
-    - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
-    - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
-    - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
-    - "renesas,pfc-r8a7742": for R8A7742 (RZ/G1H) compatible pin-controller.
-    - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
-    - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller.
-    - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
-    - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
-    - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller.
-    - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller.
-    - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller.
-    - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller.
-    - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
-    - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
-    - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
-    - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
-    - "renesas,pfc-r8a7792": for R8A7792 (R-Car V2H) compatible pin-controller.
-    - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
-    - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
-    - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
-    - "renesas,pfc-r8a7796": for R8A77960 (R-Car M3-W) compatible pin-controller.
-    - "renesas,pfc-r8a77961": for R8A77961 (R-Car M3-W+) compatible pin-controller.
-    - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller.
-    - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller.
-    - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller.
-    - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller.
-    - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller.
-    - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
-
-  - reg: Base address and length of each memory resource used by the pin
-    controller hardware module.
-
-Optional properties:
-
-  - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
-    otherwise. Should be 3.
-
-  - interrupts-extended: Specify the interrupts associated with external
-    IRQ pins. This property is mandatory when the PFC handles GPIOs and
-    forbidden otherwise. When specified, it must contain one interrupt per
-    external IRQ, sorted by external IRQ number.
-
-The PFC node also acts as a container for pin configuration nodes. Please refer
-to pinctrl-bindings.txt in this directory for the definition of the term "pin
-configuration node" and for the common pinctrl bindings used by client devices.
-
-Each pin configuration node represents a desired configuration for a pin, a
-pin group, or a list of pins or pin groups. The configuration can include the
-function to select on those pin(s) and pin configuration parameters (such as
-pull-up and pull-down).
-
-Pin configuration nodes contain pin configuration properties, either directly
-or grouped in child subnodes. Both pin muxing and configuration parameters can
-be grouped in that way and referenced as a single pin configuration node by
-client devices.
-
-A configuration node or subnode must reference at least one pin (through the
-pins or pin groups properties) and contain at least a function or one
-configuration parameter. When the function is present only pin groups can be
-used to reference pins.
-
-All pin configuration nodes and subnodes names are ignored. All of those nodes
-are parsed through phandles and processed purely based on their content.
-
-Pin Configuration Node Properties:
-
-- pins : An array of strings, each string containing the name of a pin.
-- groups : An array of strings, each string containing the name of a pin
-  group.
-
-- function: A string containing the name of the function to mux to the pin
-  group(s) specified by the groups property.
-
-  Valid values for pin, group and function names can be found in the group and
-  function arrays of the PFC data file corresponding to the SoC
-  (drivers/pinctrl/sh-pfc/pfc-*.c)
-
-The pin configuration parameters use the generic pinconf bindings defined in
-pinctrl-bindings.txt in this directory. The supported parameters are
-bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For
-pins that have a configurable I/O voltage, the power-source value should be the
-nominal I/O voltage in millivolts.
-
-
-GPIO
-----
-
-On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node.
-
-Required Properties:
-
-  - gpio-controller: Marks the device node as a gpio controller.
-
-  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-The syntax of the gpio specifier used by client nodes should be the following
-with values derived from the SoC user manual.
-
-  <[phandle of the gpio controller node]
-   [pin number within the gpio controller]
-   [flags]>
-
-On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
-for documentation of the GPIO device tree bindings on those platforms.
-
-
-Examples
---------
-
-Example 1: SH73A0 (SH-Mobile AG5) pin controller node
-
-	pfc: pin-controller@e6050000 {
-		compatible = "renesas,pfc-sh73a0";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-Example 2: A GPIO LED node that references a GPIO
-
-	#include <dt-bindings/gpio/gpio.h>
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
-           for the MMCIF and SCIFA4 devices
-
-	&pfc {
-		pinctrl-0 = <&scifa4_pins>;
-		pinctrl-names = "default";
-
-		mmcif_pins: mmcif {
-			mux {
-				groups = "mmc0_data8_0", "mmc0_ctrl_0";
-				function = "mmc0";
-			};
-			cfg {
-				groups = "mmc0_data8_0";
-				pins = "PORT279";
-				bias-pull-up;
-			};
-		};
-
-		scifa4_pins: scifa4 {
-			groups = "scifa4_data", "scifa4_ctrl";
-			function = "scifa4";
-		};
-	};
-
-Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
-
-	&mmcif {
-		pinctrl-0 = <&mmcif_pins>;
-		pinctrl-names = "default";
-
-		bus-width = <8>;
-		vmmc-supply = <&reg_1p8v>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
new file mode 100644
index 000000000000..5b5b1b9d2ec7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Pin Function Controller (PFC) is a Pin Mux/Config controller.
+  On SH/R-Mobile SoCs it also acts as a GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - renesas,pfc-emev2       # EMMA Mobile EV2
+      - renesas,pfc-r8a73a4     # R-Mobile APE6
+      - renesas,pfc-r8a7740     # R-Mobile A1
+      - renesas,pfc-r8a7742     # RZ/G1H
+      - renesas,pfc-r8a7743     # RZ/G1M
+      - renesas,pfc-r8a7744     # RZ/G1N
+      - renesas,pfc-r8a7745     # RZ/G1E
+      - renesas,pfc-r8a77470    # RZ/G1C
+      - renesas,pfc-r8a774a1    # RZ/G2M
+      - renesas,pfc-r8a774b1    # RZ/G2N
+      - renesas,pfc-r8a774c0    # RZ/G2E
+      - renesas,pfc-r8a774e1    # RZ/G2H
+      - renesas,pfc-r8a7778     # R-Car M1
+      - renesas,pfc-r8a7779     # R-Car H1
+      - renesas,pfc-r8a7790     # R-Car H2
+      - renesas,pfc-r8a7791     # R-Car M2-W
+      - renesas,pfc-r8a7792     # R-Car V2H
+      - renesas,pfc-r8a7793     # R-Car M2-N
+      - renesas,pfc-r8a7794     # R-Car E2
+      - renesas,pfc-r8a7795     # R-Car H3
+      - renesas,pfc-r8a7796     # R-Car M3-W
+      - renesas,pfc-r8a77961    # R-Car M3-W+
+      - renesas,pfc-r8a77965    # R-Car M3-N
+      - renesas,pfc-r8a77970    # R-Car V3M
+      - renesas,pfc-r8a77980    # R-Car V3H
+      - renesas,pfc-r8a77990    # R-Car E3
+      - renesas,pfc-r8a77995    # R-Car D3
+      - renesas,pfc-sh73a0      # SH-Mobile AG5
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 16
+
+  interrupts-extended:
+    minItems: 32
+    maxItems: 64
+    description:
+      Specify the interrupts associated with external IRQ pins on SoCs where
+      the PFC acts as a GPIO controller.  It must contain one interrupt per
+      external IRQ, sorted by external IRQ number.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      items:
+        enum:
+          - renesas,pfc-r8a73a4
+          - renesas,pfc-r8a7740
+          - renesas,pfc-sh73a0
+then:
+  required:
+    - interrupts-extended
+    - gpio-controller
+    - '#gpio-cells'
+    - gpio-ranges
+    - power-domains
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength:
+          enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values
+        power-source:
+          enum: [ 1800, 3300 ]
+        gpio-hog: true
+        gpios: true
+        input: true
+        output-high: true
+        output-low: true
+
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    pfc: pinctrl@e6050000 {
+            compatible = "renesas,pfc-r8a7740";
+            reg = <0xe6050000 0x8000>,
+                  <0xe605800c 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 0 212>;
+            interrupts-extended =
+                <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+                <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+                <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+                <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+                <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+                <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+                <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+                <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+            power-domains = <&pd_c5>;
+
+            lcd0-mux-hog {
+                    /* DBGMD/LCDC0/FSIA MUX */
+                    gpio-hog;
+                    gpios = <176 0>;
+                    output-high;
+            };
+    };
+
+  - |
+    pinctrl@e6060000 {
+            compatible = "renesas,pfc-r8a7795";
+            reg = <0xe6060000 0x50c>;
+
+            avb_pins: avb {
+                    mux {
+                            groups = "avb_link", "avb_mdio", "avb_mii";
+                            function = "avb";
+                    };
+
+                    pins_mdio {
+                            groups = "avb_mdio";
+                            drive-strength = <24>;
+                    };
+
+                    pins_mii_tx {
+                            pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
+                                   "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2",
+                                   "PIN_AVB_TD3";
+                            drive-strength = <12>;
+                    };
+            };
+
+            keys_pins: keys {
+                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+                    bias-pull-up;
+            };
+
+            sdhi0_pins: sd0 {
+                    groups = "sdhi0_data4", "sdhi0_ctrl";
+                    function = "sdhi0";
+                    power-source = <3300>;
+            };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
deleted file mode 100644
index fd3696eb36bf..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
+++ /dev/null
@@ -1,223 +0,0 @@
-Renesas RZ/A1 combined Pin and GPIO controller
-
-The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO controller,
-named "Ports" in the hardware reference manual.
-Pin multiplexing and GPIO configuration is performed on a per-pin basis
-writing configuration values to per-port register sets.
-Each "port" features up to 16 pins, each of them configurable for GPIO
-function (port mode) or in alternate function mode.
-Up to 8 different alternate function modes exist for each single pin.
-
-Pin controller node
--------------------
-
-Required properties:
-  - compatible: should be:
-    - "renesas,r7s72100-ports": for RZ/A1H
-    - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M
-    - "renesas,r7s72102-ports": for RZ/A1L
-
-  - reg
-    address base and length of the memory area where the pin controller
-    hardware is mapped to.
-
-Example:
-Pin controller node for RZ/A1H SoC (r7s72100)
-
-pinctrl: pin-controller@fcfe3000 {
-	compatible = "renesas,r7s72100-ports";
-
-	reg = <0xfcfe3000 0x4230>;
-};
-
-Sub-nodes
----------
-
-The child nodes of the pin controller node describe a pin multiplexing
-function or a GPIO controller alternatively.
-
-- Pin multiplexing sub-nodes:
-  A pin multiplexing sub-node describes how to configure a set of
-  (or a single) pin in some desired alternate function mode.
-  A single sub-node may define several pin configurations.
-  A few alternate function require special pin configuration flags to be
-  supplied along with the alternate function configuration number.
-  The hardware reference manual specifies when a pin function requires
-  "software IO driven" mode to be specified. To do so use the generic
-  properties from the <include/linux/pinctrl/pinconf_generic.h> header file
-  to instruct the pin controller to perform the desired pin configuration
-  operation.
-  Please refer to pinctrl-bindings.txt to get to know more on generic
-  pin properties usage.
-
-  The allowed generic formats for a pin multiplexing sub-node are the
-  following ones:
-
-  node-1 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-  };
-
-  node-2 {
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      sub-node-2 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  Use the second format when pins part of the same logical group need to have
-  different generic pin configuration flags applied.
-
-  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
-  of the most external one.
-
-  Eg.
-
-  client-1 {
-      ...
-      pinctrl-0 = <&node-1>;
-      ...
-  };
-
-  client-2 {
-      ...
-      pinctrl-0 = <&node-2>;
-      ...
-  };
-
-  Required properties:
-    - pinmux:
-      integer array representing pin number and pin multiplexing configuration.
-      When a pin has to be configured in alternate function mode, use this
-      property to identify the pin by its global index, and provide its
-      alternate function configuration number along with it.
-      When multiple pins are required to be configured as part of the same
-      alternate function they shall be specified as members of the same
-      argument list of a single "pinmux" property.
-      Helper macros to ease assembling the pin index from its position
-      (port where it sits on and pin number) and alternate function identifier
-      are provided by the pin controller header file at:
-      <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
-      Integers values in "pinmux" argument list are assembled as:
-      ((PORT * 16 + PIN) | MUX_FUNC << 16)
-
-  Optional generic properties:
-    - input-enable:
-      enable input bufer for pins requiring software driven IO input
-      operations.
-    - output-high:
-      enable output buffer for pins requiring software driven IO output
-      operations. output-low can be used alternatively, as line value is
-      ignored by the driver.
-
-  The hardware reference manual specifies when a pin has to be configured to
-  work in bi-directional mode and when the IO direction has to be specified
-  by software. Bi-directional pins are managed by the pin controller driver
-  internally, while software driven IO direction has to be explicitly
-  selected when multiple options are available.
-
-  Example:
-  A serial communication interface with a TX output pin and an RX input pin.
-
-  &pinctrl {
-	scif2_pins: serial2 {
-		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
-	};
-  };
-
-  Pin #0 on port #3 is configured as alternate function #6.
-  Pin #2 on port #3 is configured as alternate function #4.
-
-  Example 2:
-  I2c master: both SDA and SCL pins need bi-directional operations
-
-  &pinctrl {
-	i2c2_pins: i2c2 {
-		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
-	};
-  };
-
-  Pin #4 on port #1 is configured as alternate function #1.
-  Pin #5 on port #1 is configured as alternate function #1.
-  Both need to work in bi-directional mode, the driver manages this internally.
-
-  Example 3:
-  Multi-function timer input and output compare pins.
-  Configure TIOC0A as software driven input and TIOC0B as software driven
-  output.
-
-  &pinctrl {
-	tioc0_pins: tioc0 {
-		tioc0_input_pins {
-			pinumx = <RZA1_PINMUX(4, 0, 2)>;
-			input-enable;
-		};
-
-		tioc0_output_pins {
-			pinmux = <RZA1_PINMUX(4, 1, 1)>;
-			output-enable;
-		};
-	};
-  };
-
-  &tioc0 {
-	...
-	pinctrl-0 = <&tioc0_pins>;
-	...
-  };
-
-  Pin #0 on port #4 is configured as alternate function #2 with IO direction
-  specified by software as input.
-  Pin #1 on port #4 is configured as alternate function #1 with IO direction
-  specified by software as output.
-
-- GPIO controller sub-nodes:
-  Each port of the r7s72100 pin controller hardware is itself a GPIO controller.
-  Different SoCs have different numbers of available pins per port, but
-  generally speaking, each of them can be configured in GPIO ("port") mode
-  on this hardware.
-  Describe GPIO controllers using sub-nodes with the following properties.
-
-  Required properties:
-    - gpio-controller
-      empty property as defined by the GPIO bindings documentation.
-    - #gpio-cells
-      number of cells required to identify and configure a GPIO.
-      Shall be 2.
-    - gpio-ranges
-      Describes a GPIO controller specifying its specific pin base, the pin
-      base in the global pin numbering space, and the number of controlled
-      pins, as defined by the GPIO bindings documentation. Refer to
-      Documentation/devicetree/bindings/gpio/gpio.txt file for a more detailed
-      description.
-
-  Example:
-  A GPIO controller node, controlling 16 pins indexed from 0.
-  The GPIO controller base in the global pin indexing space is pin 48, thus
-  pins [0 - 15] on this controller map to pins [48 - 63] in the global pin
-  indexing space.
-
-  port3: gpio-3 {
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-ranges = <&pinctrl 0 48 16>;
-  };
-
-  A device node willing to use pins controlled by this GPIO controller, shall
-  refer to it as follows:
-
-  led1 {
-	gpios = <&port3 10 GPIO_ACTIVE_LOW>;
-  };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
new file mode 100644
index 000000000000..7f80578dc229
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 combined Pin and GPIO controller
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO
+  controller, named "Ports" in the hardware reference manual.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis
+  writing configuration values to per-port register sets.
+  Each "port" features up to 16 pins, each of them configurable for GPIO
+  function (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r7s72100-ports     # RZ/A1H
+      - items:
+          - const: renesas,r7s72101-ports # RZ/A1M
+          - const: renesas,r7s72100-ports # fallback
+      - const: renesas,r7s72102-ports     # RZ/A1L
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^gpio-[0-9]*$":
+    type: object
+
+    description:
+      Each port of the r7s72100 pin controller hardware is itself a GPIO
+      controller.
+      Different SoCs have different numbers of available pins per port, but
+      generally speaking, each of them can be configured in GPIO ("port") mode
+      on this hardware.
+      Describe GPIO controllers using sub-nodes with the following properties.
+
+    properties:
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - gpio-ranges
+
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+        A few alternate function require special pin configuration flags to be
+        supplied along with the alternate function configuration number.
+        The hardware reference manual specifies when a pin function requires
+        "software IO driven" mode to be specified. To do so use the generic
+        properties from the <include/linux/pinctrl/pinconf_generic.h> header
+        file to instruct the pin controller to perform the desired pin
+        configuration operation.
+        The hardware reference manual specifies when a pin has to be configured
+        to work in bi-directional mode and when the IO direction has to be
+        specified by software. Bi-directional pins must be managed by the pin
+        controller driver internally, while software driven IO direction has to
+        be explicitly selected when multiple options are available.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Helper macros to ease assembling the pin index from its position
+            (port where it sits on and pin number) and alternate function
+            identifier are provided by the pin controller header file at:
+            <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
+            Integers values in "pinmux" argument list are assembled as:
+            ((PORT * 16 + PIN) | MUX_FUNC << 16)
+
+        phandle: true
+        input-enable: true
+        output-enable: true
+
+      required:
+        - pinmux
+
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+    pinctrl: pinctrl@fcfe3000 {
+            compatible = "renesas,r7s72100-ports";
+
+            reg = <0xfcfe3000 0x4230>;
+
+            /*
+             * A GPIO controller node, controlling 16 pins indexed from 0.
+             * The GPIO controller base in the global pin indexing space is pin
+             * 48, thus pins [0 - 15] on this controller map to pins [48 - 63]
+             * in the global pin indexing space.
+             */
+            port3: gpio-3 {
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pinctrl 0 48 16>;
+            };
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             * Pin #0 on port #3 is configured as alternate function #6.
+             * Pin #2 on port #3 is configured as alternate function #4.
+             */
+            scif2_pins: serial2 {
+                    pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+            };
+
+
+            /*
+             * I2c master: both SDA and SCL pins need bi-directional operations
+             * Pin #4 on port #1 is configured as alternate function #1.
+             * Pin #5 on port #1 is configured as alternate function #1.
+             * Both need to work in bi-directional mode, the driver must manage
+             * this internally.
+             */
+            i2c2_pins: i2c2 {
+                    pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+            };
+
+
+            /*
+             * Multi-function timer input and output compare pins.
+             */
+            tioc0_pins: tioc0 {
+                    /*
+                     * Configure TIOC0A as software driven input
+                     * Pin #0 on port #4 is configured as alternate function #2
+                     * with IO direction specified by software as input.
+                     */
+                    tioc0_input_pins {
+                            pinmux = <RZA1_PINMUX(4, 0, 2)>;
+                            input-enable;
+                    };
+
+                    /*
+                     * Configure TIOC0B as software driven output
+                     * Pin #1 on port #4 is configured as alternate function #1
+                     * with IO direction specified by software as output.
+                     */
+                    tioc0_output_pins {
+                            pinmux = <RZA1_PINMUX(4, 1, 1)>;
+                            output-enable;
+                    };
+            };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
index b7911a994f3a..ce1f7343788f 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -84,7 +84,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
-    pinctrl: pin-controller@fcffe000 {
+    pinctrl: pinctrl@fcffe000 {
             compatible = "renesas,r7s9210-pinctrl";
             reg = <0xfcffe000 0x1000>;
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
deleted file mode 100644
index 25e53acd523e..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-Renesas RZ/N1 SoC Pinctrl node description.
-
-Pin controller node
--------------------
-Required properties:
-- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl"
-  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible
-  strings must be one of:
-	"renesas,r9a06g032-pinctrl" for RZ/N1D
-	"renesas,r9a06g033-pinctrl" for RZ/N1S
-- reg: Address base and length of the memory area where the pin controller
-  hardware is mapped to.
-- clocks: phandle for the clock, see the description of clock-names below.
-- clock-names: Contains the name of the clock:
-    "bus", the bus clock, sometimes described as pclk, for register accesses.
-
-Example:
-	pinctrl: pin-controller@40067000 {
-	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
-	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
-	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
-	    clock-names = "bus";
-	};
-
-Sub-nodes
----------
-
-The child nodes of the pin controller node describe a pin multiplexing
-function.
-
-- Pin multiplexing sub-nodes:
-  A pin multiplexing sub-node describes how to configure a set of
-  (or a single) pin in some desired alternate function mode.
-  A single sub-node may define several pin configurations.
-  Please refer to pinctrl-bindings.txt to get to know more on generic
-  pin properties usage.
-
-  The allowed generic formats for a pin multiplexing sub-node are the
-  following ones:
-
-  node-1 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-  };
-
-  node-2 {
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      sub-node-2 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  node-3 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  Use the latter two formats when pins part of the same logical group need to
-  have different generic pin configuration flags applied. Note that the generic
-  pinconfig in node-3 does not apply to the sub-nodes.
-
-  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
-  of the most external one.
-
-  Eg.
-
-  client-1 {
-      ...
-      pinctrl-0 = <&node-1>;
-      ...
-  };
-
-  client-2 {
-      ...
-      pinctrl-0 = <&node-2>;
-      ...
-  };
-
-  Required properties:
-    - pinmux:
-      integer array representing pin number and pin multiplexing configuration.
-      When a pin has to be configured in alternate function mode, use this
-      property to identify the pin by its global index, and provide its
-      alternate function configuration number along with it.
-      When multiple pins are required to be configured as part of the same
-      alternate function they shall be specified as members of the same
-      argument list of a single "pinmux" property.
-      Integers values in the "pinmux" argument list are assembled as:
-      (PIN | MUX_FUNC << 8)
-      where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is
-      one of the alternate function identifiers defined in:
-      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
-      These identifiers collapse the IO Multiplex Configuration Level 1 and
-      Level 2 numbers that are detailed in the hardware reference manual into a
-      single number. The identifiers for Level 2 are simply offset by 10.
-      Additional identifiers are provided to specify the MDIO source peripheral.
-
-  Optional generic pinconf properties:
-    - bias-disable		- disable any pin bias
-    - bias-pull-up		- pull up the pin with 50 KOhm
-    - bias-pull-down		- pull down the pin with 50 KOhm
-    - bias-high-impedance	- high impedance mode
-    - drive-strength		- sink or source at most 4, 6, 8 or 12 mA
-
-  Example:
-  A serial communication interface with a TX output pin and an RX input pin.
-
-  &pinctrl {
-	pins_uart0: pins_uart0 {
-		pinmux = <
-			RZN1_PINMUX(103, RZN1_FUNC_UART0_I)	/* UART0_TXD */
-			RZN1_PINMUX(104, RZN1_FUNC_UART0_I)	/* UART0_RXD */
-		>;
-	};
-  };
-
-  Example 2:
-  Here we set the pull up on the RXD pin of the UART.
-
-  &pinctrl {
-	pins_uart0: pins_uart0 {
-		pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;	/* TXD */
-
-		pins_uart6_rx {
-			pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */
-			bias-pull-up;
-		};
-	};
-  };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
new file mode 100644
index 000000000000..4a43af0d6e02
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Pin Controller
+
+maintainers:
+  - Gareth Williams <gareth.williams.jx@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-pinctrl # RZ/N1D
+          - renesas,r9a06g033-pinctrl # RZ/N1S
+      - const: renesas,rzn1-pinctrl   # Generic RZ/N1
+
+  reg:
+    items:
+      - description: GPIO Multiplexing Level1 Register Block
+      - description: GPIO Multiplexing Level2 Register Block
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: bus
+    description:
+      The bus clock, sometimes described as pclk, for register accesses.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Integers values in the "pinmux" argument list are assembled as:
+            (PIN | MUX_FUNC << 8)
+            where PIN directly corresponds to the pl_gpio pin number and
+            MUX_FUNC is one of the alternate function identifiers defined in:
+            <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+            These identifiers collapse the IO Multiplex Configuration Level 1
+            and Level 2 numbers that are detailed in the hardware reference
+            manual into a single number. The identifiers for Level 2 are simply
+            offset by 10.  Additional identifiers are provided to specify the
+            MDIO source peripheral.
+
+        phandle: true
+        bias-disable: true
+        bias-pull-up:
+          description: Pull up the pin with 50 kOhm
+        bias-pull-down:
+          description: Pull down the pin with 50 kOhm
+        bias-high-impedance: true
+        drive-strength:
+          enum: [ 4, 6, 8, 12 ]
+
+      required:
+        - pinmux
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+    pinctrl: pinctrl@40067000 {
+            compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+            reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+            clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+            clock-names = "bus";
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             */
+            pins_uart0: pins_uart0 {
+                    pinmux = <
+                            RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+                            RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+                    >;
+            };
+
+            /*
+             * Set the pull-up on the RXD pin of the UART.
+             */
+            pins_uart0_alt: pins_uart0_alt {
+                    pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;
+
+                    pins_uart6_rx {
+                            pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>;
+                            bias-pull-up;
+                    };
+            };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 70659c917bdc..7734ab6fec44 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -65,7 +65,7 @@ Required Properties:
 
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
   mode) and pin config (pull up/down, driver strength) settings are represented
-  as child nodes of the pin-controller node. There should be atleast one
+  as child nodes of the pin-controller node. There should be at least one
   child node and there is no limit on the count of these child nodes. It is
   also possible for a child node to consist of several further child nodes
   to allow grouping multiple pinctrl groups into one. The format of second
@@ -75,7 +75,7 @@ Required Properties:
   The child node should contain a list of pin(s) on which a particular pin
   function selection or pin configuration (or both) have to applied. This
   list of pins is specified using the property name "samsung,pins". There
-  should be atleast one pin specfied for this property and there is no upper
+  should be at least one pin specified for this property and there is no upper
   limit on the count of pins that can be specified. The pins are specified
   using pin names which are derived from the hardware manual of the SoC. As
   an example, the pins in GPA0 bank of the pin controller can be represented
@@ -107,7 +107,7 @@ Required Properties:
   hardware manual and these values are programmed as-is into the pin
   pull up/down and driver strength register of the pin-controller.
 
-  Note: A child should include atleast a pin function selection property or
+  Note: A child should include at least a pin function selection property or
   pin configuration property (one or more) or both.
 
   The client nodes that require a particular pin function selection and/or
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index f8a93d8680f9..502480a19f49 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -28,6 +28,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
new file mode 100644
index 000000000000..9f1dab0c2430
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/toshiba,visconti-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti TMPV770x pin mux/config controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshiba's Visconti ARM SoC a pin mux/config controller.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tmpv7708-pinctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pinctrl groups available on the machine. Each subnode will list the
+      pins it needs, and how they should be configured, with regard to muxer
+      configuration, pullups, drive strength.
+    $ref: "pinmux-node.yaml"
+
+    properties:
+      function:
+        description:
+          Function to mux.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
+               spi0, spi1, spi2, spi3, spi4, spi5, spi6,
+               uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
+
+      groups:
+        description:
+          Name of the pin group to use for the functions.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
+               i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+               spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+               spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+               uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+               pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+               pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+               pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+               pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+               pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+               pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 16, 24, 32]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-up: true
+
+      bias-pull-down: true
+
+      bias-disable: true
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmux: pmux@24190000 {
+            compatible = "toshiba,tmpv7708-pinctrl";
+            reg = <0 0x24190000 0 0x10000>;
+
+            spi0_pins: spi0-pins {
+                function = "spi0";
+                groups = "spi0_grp";
+            };
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index 4f524f822e84..d30f85cc395e 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -27,6 +27,7 @@ properties:
       - amlogic,meson8b-pwrc
       - amlogic,meson8m2-pwrc
       - amlogic,meson-gxbb-pwrc
+      - amlogic,meson-axg-pwrc
       - amlogic,meson-g12a-pwrc
       - amlogic,meson-sm1-pwrc
 
@@ -42,11 +43,11 @@ properties:
       - const: vapb
 
   resets:
-    minItems: 11
+    minItems: 5
     maxItems: 12
 
   reset-names:
-    minItems: 11
+    minItems: 5
     maxItems: 12
 
   "#power-domain-cells":
@@ -107,6 +108,24 @@ allOf:
         - resets
         - reset-names
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
+
   - if:
       properties:
         compatible:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
index bc4e037f3f73..5dae04d2936c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -27,6 +27,8 @@ required:
   - compatible
   - "#power-domain-cells"
 
+additionalProperties: false
+
 examples:
   - |
     secure-monitor {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
new file mode 100644
index 000000000000..63b15ac6dde4
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM63xx power domain driver
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
+  to enable/disable certain components in order to save power.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm6318-power-controller
+          - brcm,bcm6328-power-controller
+          - brcm,bcm6362-power-controller
+          - brcm,bcm63268-power-controller
+
+  reg:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_pwr: power-controller@10001848 {
+        compatible = "brcm,bcm6328-power-controller";
+        reg = <0x10001848 0x4>;
+        #power-domain-cells = <1>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/domain-idle-state.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/domain-idle-state.yaml
index dfba1af9abe5..6a12efdf436a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/domain-idle-state.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/domain-idle-state.yaml
@@ -50,6 +50,8 @@ patternProperties:
       - exit-latency-us
       - min-residency-us
 
+additionalProperties: false
+
 examples:
   - |
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
index bde09a0b2da3..a96e6dbf1858 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -33,6 +33,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  interrupt-controller: true
+  '#interrupt-cells':
+    const: 3
+
   pgc:
     type: object
     description: list of power domains provided by this controller.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
index ccdeaece169e..be447ccfdcb8 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
@@ -26,6 +26,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     cpc@1bde0000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/pd-samsung.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/pd-samsung.yaml
index 09bdd96c1ec1..9c2c51133457 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/pd-samsung.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -49,6 +49,8 @@ required:
   - "#power-domain-cells"
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     lcd0_pd: power-domain@10023c80 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/power-domain.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/power-domain.yaml
index dd564349aa53..aed51e9dcb11 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/power-domain.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -69,6 +69,8 @@ properties:
 required:
   - "#power-domain-cells"
 
+additionalProperties: true
+
 examples:
   - |
     power: power-controller@12340000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index ec2aaeee78dc..99e8042ac111 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -40,6 +40,7 @@ properties:
       - renesas,r8a77980-sysc # R-Car V3H
       - renesas,r8a77990-sysc # R-Car E3
       - renesas,r8a77995-sysc # R-Car D3
+      - renesas,r8a779a0-sysc # R-Car V3U
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
index 1b4213eb3473..4d530d815484 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -1,10 +1,13 @@
 Microsemi Ocelot reset controller
 
 The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
-SoC MIPS core.
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.
 
 Required Properties:
- - compatible: "mscc,ocelot-chip-reset"
+ - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset"
 
 Example:
 	reset@1070008 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/reset/reboot-mode.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
deleted file mode 100644
index de34f27d509e..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Generic reboot mode core map driver
-
-This driver get reboot mode arguments and call the write
-interface to store the magic value in special register
-or ram. Then the bootloader can read it and take different
-action according to the argument stored.
-
-All mode properties are vendor specific, it is a indication to tell
-the bootloader what to do when the system reboots, and should be named
-as mode-xxx = <magic> (xxx is mode name, magic should be a none-zero value).
-
-For example modes common on Android platform:
-- mode-normal: Normal reboot mode, system reboot with command "reboot".
-- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image.
-- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
-- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
-	       usually used in development.
-
-Example:
-	reboot-mode {
-		mode-normal = <BOOT_NORMAL>;
-		mode-recovery = <BOOT_RECOVERY>;
-		mode-bootloader = <BOOT_FASTBOOT>;
-		mode-loader = <BOOT_BL_DOWNLOAD>;
-	}
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
new file mode 100644
index 000000000000..9c6fda6b1dd9
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic reboot mode core map
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+  This driver get reboot mode arguments and call the write
+  interface to store the magic value in special register
+  or ram. Then the bootloader can read it and take different
+  action according to the argument stored.
+
+  All mode properties are vendor specific, it is a indication to tell
+  the bootloader what to do when the system reboots, and should be named
+  as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value).
+
+  For example, modes common Android platform are:
+    - normal: Normal reboot mode, system reboot with command "reboot".
+    - recovery: Android Recovery mode, it is a mode to format the device or update a new image.
+    - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
+    - loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
+              usually used in development.
+
+properties:
+  mode-normal:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Default value to set on a reboot if no command was provided.
+
+patternProperties:
+  "^mode-.*$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: false
+
+examples:
+  - |
+    reboot-mode {
+      mode-normal = <0>;
+      mode-recovery = <1>;
+      mode-bootloader = <2>;
+      mode-loader = <3>;
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
index c7dfb7cecf40..cb737a9e1f16 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
@@ -33,7 +33,7 @@ Example:
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 			interrupt-parent = <&pioA>;
-			interrupts = <45 GPIO_ACTIVE_LOW>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
 
 			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
 			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/battery.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/battery.yaml
index 932b736ce5c0..0c7e2e44793b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/battery.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -82,6 +82,27 @@ properties:
       An array containing the temperature in degree Celsius,
       for each of the battery capacity lookup table.
 
+  operating-range-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: operating temperature range of a battery
+    items:
+      - description: minimum temperature at which battery can operate
+      - description: maximum temperature at which battery can operate
+
+  ambient-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of ambient temperature
+    items:
+      - description: alert when ambient temperature is lower than this value
+      - description: alert when ambient temperature is higher than this value
+
+  alert-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of battery temperature
+    items:
+      - description: alert when battery temperature is lower than this value
+      - description: alert when battery temperature is higher than this value
+
 required:
   - compatible
 
@@ -130,6 +151,9 @@ examples:
         /* table for 10 degree Celsius */
         ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
         resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+        operating-range-celsius = <(-30) 50>;
+        ambient-celsius = <(-5) 50>;
+        alert-celsius = <0 40>;
       };
 
       charger@11 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/bq25890.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/bq25890.txt
index 3b4c69a7fa70..805040c6fff9 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/bq25890.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/bq25890.txt
@@ -33,6 +33,10 @@ Optional properties:
 - ti,thermal-regulation-threshold: integer, temperature above which the charge
     current is lowered, to avoid overheating (in degrees Celsius). If omitted,
     the default setting will be used (120 degrees);
+- ti,ibatcomp-micro-ohms: integer, value of a resistor in series with
+    the battery;
+- ti,ibatcomp-clamp-microvolt: integer, maximum charging voltage adjustment due
+    to expected voltage drop on in-series resistor;
 
 Example:
 
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/bq25980.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/bq25980.yaml
new file mode 100644
index 000000000000..f6b3dd4093ca
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq25980.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+  - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+
+description: |
+  The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+  for use in high-power density portable electronics. These inductorless
+  switching chargers can provide over 97% efficiency by making use of the
+  switched capacitor architecture.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25980
+      - ti,bq25975
+      - ti,bq25960
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    description: |
+      Watchdog timer in milli seconds. 0 disables the watchdog.
+    default: 0
+    minimum: 0
+    maximum: 300000
+    enum: [ 0, 5000, 10000, 50000, 300000]
+
+  ti,sc-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 100000 micro volt step.
+    default: 17800000
+    minimum: 14000000
+    maximum: 22000000
+
+  ti,sc-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 50000 micro volt step.
+    minimum: 7000000
+    maximum: 12750000
+
+  ti,bypass-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-enable:
+    type: boolean
+    description: Enables bypass mode at boot time
+
+  interrupts:
+    description: |
+      Indicates that the device state has changed.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <4000000>;
+      constant-charge-voltage-max-microvolt = <8400000>;
+      precharge-current-microamp = <160000>;
+      charge-term-current-microamp = <160000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25980: charger@65 {
+          compatible = "ti,bq25980";
+          reg = <0x65>;
+          interrupt-parent = <&gpio1>;
+          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+          ti,watchdog-timer = <0>;
+          ti,sc-ocp-limit-microamp = <2000000>;
+          ti,sc-ovp-limit-microvolt = <17800000>;
+          monitored-battery = <&bat>;
+      };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
index 82f682705f44..45beefccf31a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -51,6 +51,7 @@ properties:
       - ti,bq27621
       - ti,bq27z561
       - ti,bq28z610
+      - ti,bq34z100
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/charger-manager.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/charger-manager.txt
index ec4fe9de3137..b5ae9061b7a0 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/charger-manager.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/charger-manager.txt
@@ -3,24 +3,32 @@ charger-manager bindings
 
 Required properties :
  - compatible : "charger-manager"
- - <>-supply : for regulator consumer
- - cm-num-chargers : number of chargers
+ - <>-supply : for regulator consumer, named according to cm-regulator-name
  - cm-chargers : name of chargers
  - cm-fuel-gauge : name of battery fuel gauge
  - subnode <regulator> :
 	- cm-regulator-name : name of charger regulator
 	- subnode <cable> :
-		- cm-cable-name : name of charger cable
+		- cm-cable-name : name of charger cable - one of USB, USB-HOST,
+			SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT,
+			PD, DOCK, JIG, or MECHANICAL
 		- cm-cable-extcon : name of extcon dev
 (optional)	- cm-cable-min : minimum current of cable
 (optional)	- cm-cable-max : maximum current of cable
 
 Optional properties :
  - cm-name : charger manager's name (default : "battery")
- - cm-poll-mode : polling mode (enum polling_modes)
- - cm-poll-interval : polling interval
- - cm-battery-stat : battery status (enum data_source)
- - cm-fullbatt-* : data for full battery checking
+ - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when
+	external power is connected, or 3 for when charging.  If not present,
+	then polling is disabled
+ - cm-poll-interval : polling interval (in ms)
+ - cm-battery-stat : battery status - 0 for battery always present, 1 for no
+	battery, 2 to check presence via fuel gauge, or 3 to check presence
+	via charger
+ - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging
+ - cm-fullbatt-voltage : voltage (in uV) of full battery
+ - cm-fullbatt-soc : state of charge to consider as full battery
+ - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery
  - cm-thermal-zone : name of external thermometer's thermal zone
  - cm-battery-* : threshold battery temperature for charging
 	-cold : critical cold temperature of battery for charging
@@ -29,6 +37,10 @@ Optional properties :
 	-temp-diff : temperature difference to allow recharging
  - cm-dis/charging-max = limits of charging duration
 
+Deprecated properties:
+ - cm-num-chargers
+ - cm-fullbatt-vchkdrop-ms
+
 Example :
 	charger-manager@0 {
 		compatible = "charger-manager";
@@ -39,13 +51,11 @@ Example :
 		cm-poll-mode = <1>;
 		cm-poll-interval = <30000>;
 
-		cm-fullbatt-vchkdrop-ms = <30000>;
 		cm-fullbatt-vchkdrop-volt = <150000>;
 		cm-fullbatt-soc = <100>;
 
 		cm-battery-stat = <3>;
 
-		cm-num-chargers = <3>;
 		cm-chargers = "charger0", "charger1", "charger2";
 
 		cm-fuel-gauge = "fuelgauge0";
@@ -71,7 +81,7 @@ Example :
 				cm-cable-max = <500000>;
 			};
 			cable@1 {
-				cm-cable-name = "TA";
+				cm-cable-name = "SDP";
 				cm-cable-extcon = "extcon-dev.0";
 				cm-cable-min = <650000>;
 				cm-cable-max = <675000>;
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index 2036977ecc2f..ee92e6a076ac 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -52,6 +52,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
index 6244b8ee9402..89f8e2bcb2d7 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
@@ -39,6 +39,25 @@ properties:
     maxItems: 1
     description: GPIO indicating the charging status
 
+  charge-current-limit-gpios:
+    minItems: 1
+    maxItems: 32
+    description: GPIOs used for current limiting
+
+  charge-current-limit-mapping:
+    description: List of tuples with current in uA and a GPIO bitmap (in
+      this order). The tuples must be provided in descending order of the
+      current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description:
+            Current limit in uA
+        - description:
+            Encoded GPIO setting. Bit 0 represents last GPIO from the
+            charge-current-limit-gpios property. Bit 1 second to last
+            GPIO and so on.
+
 required:
   - compatible
 
@@ -47,6 +66,12 @@ anyOf:
       - gpios
   - required:
       - charge-status-gpios
+  - required:
+      - charge-current-limit-gpios
+
+dependencies:
+  charge-current-limit-gpios: [ charge-current-limit-mapping ]
+  charge-current-limit-mapping: [ charge-current-limit-gpios ]
 
 additionalProperties: false
 
@@ -60,4 +85,10 @@ examples:
 
       gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
       charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+      charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+                                   <&gpioA 12 GPIO_ACTIVE_HIGH>;
+      charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+                                     <700000 0x01>, // 700 mA => GPIO A.12 high
+                                     <0 0x02>; // 0 mA => GPIO A.11 high
     };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt
deleted file mode 100644
index 66430bf73815..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Ingenic JZ47xx battery bindings
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-battery".
-- io-channels: phandle and IIO specifier pair to the IIO device.
-  Format described in iio-bindings.txt.
-- monitored-battery: phandle to a "simple-battery" compatible node.
-
-The "monitored-battery" property must be a phandle to a node using the format
-described in battery.txt, with the following properties being required:
-
-- voltage-min-design-microvolt: Drained battery voltage.
-- voltage-max-design-microvolt: Fully charged battery voltage.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-simple_battery: battery {
-	compatible = "simple-battery";
-	voltage-min-design-microvolt = <3600000>;
-	voltage-max-design-microvolt = <4200000>;
-};
-
-ingenic_battery {
-	compatible = "ingenic,jz4740-battery";
-	io-channels = <&adc INGENIC_ADC_BATTERY>;
-	io-channel-names = "battery";
-	monitored-battery = <&simple_battery>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
new file mode 100644
index 000000000000..76c227a7cd5c
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic JZ47xx battery bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ingenic,jz4740-battery
+      - items:
+          - enum:
+              - ingenic,jz4725b-battery
+              - ingenic,jz4770-battery
+          - const: ingenic,jz4740-battery
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: battery
+
+  monitored-battery:
+    description: >
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - voltage-min-design-microvolt: drained battery voltage,
+      - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    simple_battery: battery {
+            compatible = "simple-battery";
+            voltage-min-design-microvolt = <3600000>;
+            voltage-max-design-microvolt = <4200000>;
+    };
+
+    ingenic-battery {
+            compatible = "ingenic,jz4740-battery";
+            io-channels = <&adc INGENIC_ADC_BATTERY>;
+            io-channel-names = "battery";
+            monitored-battery = <&simple_battery>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/max17040_battery.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/max17040_battery.txt
index 4e0186b8380f..c802f664b508 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/max17040_battery.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/max17040_battery.txt
@@ -2,7 +2,9 @@ max17040_battery
 ~~~~~~~~~~~~~~~~
 
 Required properties :
- - compatible : "maxim,max17040" or "maxim,max77836-battery"
+ - compatible : "maxim,max17040", "maxim,max17041", "maxim,max17043",
+		"maxim,max17044", "maxim,max17048", "maxim,max17049",
+		"maxim,max17058", "maxim,max17059" or "maxim,max77836-battery"
  - reg: i2c slave address
 
 Optional properties :
@@ -11,6 +13,15 @@ Optional properties :
 				generated. Can be configured from 1 up to 32
 				(%). If skipped the power up default value of
 				4 (%) will be used.
+- maxim,double-soc : 		Certain devices return double the capacity.
+				Specify this boolean property to divide the
+				reported value in 2 and thus normalize it.
+				SOC == State of Charge == Capacity.
+- maxim,rcomp :			A value to compensate readings for various
+				battery chemistries and operating temperatures.
+				max17040,41 have 2 byte rcomp, default to
+				0x97 0x00. All other devices have one byte
+				rcomp, default to 0x97.
 - interrupts : 			Interrupt line see Documentation/devicetree/
 				bindings/interrupt-controller/interrupts.txt
 - wakeup-source :		This device has wakeup capabilities. Use this
@@ -31,3 +42,11 @@ Example:
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		wakeup-source;
 	};
+
+	battery-fuel-gauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+		maxim,rcomp = /bits/ 8 <0x56>;
+		maxim,alert-low-soc-level = <10>;
+		maxim,double-soc;
+	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/power-supply.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/power-supply.yaml
index 3bb02bb3a2d8..c5c55f627251 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/power-supply.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -16,6 +16,8 @@ properties:
       This property is added to a supply in order to list the devices which
       supply it power, referenced by their phandles.
 
+additionalProperties: true
+
 examples:
   - |
     power {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
index 7e0f73a898c7..9852d2febf65 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
@@ -112,6 +112,12 @@ properties:
 #     threshold, and the current is below this setting (7 in above chart)
 #   See also Documentation/devicetree/bindings/power/supply/battery.txt
 
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
   monitored-battery:
     description:
       phandle of battery characteristics devicetree node
@@ -137,6 +143,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     i2c {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
new file mode 100644
index 000000000000..983fc215c1e5
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - summit,smb345
+      - summit,smb347
+      - summit,smb358
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: phandle to the battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  summit,enable-usb-charging:
+    type: boolean
+    description: Enable charging through USB.
+
+  summit,enable-otg-charging:
+    type: boolean
+    description: Provide power for USB OTG
+
+  summit,enable-mains-charging:
+    type: boolean
+    description: Enable charging through mains
+
+  summit,enable-charge-control:
+    description: Enable charging control
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+      - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+      - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+  summit,fast-voltage-threshold-microvolt:
+    description: Voltage threshold to transit to fast charge mode (in uV)
+    minimum: 2400000
+    maximum: 3000000
+
+  summit,mains-current-limit-microamp:
+    description: Maximum input current from AC/DC input (in uA)
+
+  summit,usb-current-limit-microamp:
+    description: Maximum input current from USB input (in uA)
+
+  summit,charge-current-compensation-microamp:
+    description: Charge current compensation (in uA)
+
+  summit,chip-temperature-threshold-celsius:
+    description: Chip temperature for thermal regulation in °C.
+    enum: [100, 110, 120, 130]
+
+  summit,soft-compensation-method:
+    description: Soft temperature limit compensation method
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+      - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+      - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - summit,smb345
+            - summit,smb358
+
+    then:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [200000, 450000, 600000, 900000]
+
+    else:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [250000, 700000, 900000, 1200000]
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - summit,enable-usb-charging
+  - required:
+      - summit,enable-otg-charging
+  - required:
+      - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/summit,smb347-charger.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@7f {
+            compatible = "summit,smb347";
+            reg = <0x7f>;
+
+            summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,chip-temperature-threshold-celsius = <110>;
+            summit,mains-current-limit-microamp = <2000000>;
+            summit,usb-current-limit-microamp = <500000>;
+            summit,enable-usb-charging;
+            summit,enable-mains-charging;
+
+            monitored-battery = <&battery>;
+        };
+    };
+
+    battery: battery-cell {
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <1800000>;
+        operating-range-celsius = <0 45>;
+        alert-celsius = <3 42>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/powerpc/sleep.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/powerpc/sleep.yaml
new file mode 100644
index 000000000000..6494c7d08b93
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/powerpc/sleep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/powerpc/sleep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerPC sleep property
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Devices on SOCs often have mechanisms for placing devices into low-power
+  states that are decoupled from the devices' own register blocks.  Sometimes,
+  this information is more complicated than a cell-index property can
+  reasonably describe.  Thus, each device controlled in such a manner
+  may contain a "sleep" property which describes these connections.
+
+  The sleep property consists of one or more sleep resources, each of
+  which consists of a phandle to a sleep controller, followed by a
+  controller-specific sleep specifier of zero or more cells.
+
+  The semantics of what type of low power modes are possible are defined
+  by the sleep controller.  Some examples of the types of low power modes
+  that may be supported are:
+
+   - Dynamic: The device may be disabled or enabled at any time.
+   - System Suspend: The device may request to be disabled or remain
+     awake during system suspend, but will not be disabled until then.
+   - Permanent: The device is disabled permanently (until the next hard
+     reset).
+
+  Some devices may share a clock domain with each other, such that they should
+  only be suspended when none of the devices are in use.  Where reasonable,
+  such nodes should be placed on a virtual bus, where the bus has the sleep
+  property.  If the clock domain is shared among devices that cannot be
+  reasonably grouped in this manner, then create a virtual sleep controller
+  (similar to an interrupt nexus, except that defining a standardized
+  sleep-map should wait until its necessity is demonstrated).
+
+select: true
+
+properties:
+  sleep:
+    $ref: /schemas/types.yaml#definitions/phandle-array
+
+additionalProperties: true
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
index d48f9eb3636e..743eda754e65 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
@@ -18,6 +18,8 @@ Clock Properties:
   - fsl,tmr-add      Frequency compensation value.
   - fsl,tmr-fiper1   Fixed interval period pulse generator.
   - fsl,tmr-fiper2   Fixed interval period pulse generator.
+  - fsl,tmr-fiper3   Fixed interval period pulse generator.
+                     Supported only on DPAA2 and ENETC hardware.
   - fsl,max-adj      Maximum frequency adjustment in parts per billion.
   - fsl,extts-fifo   The presence of this property indicates hardware
 		     support for the external trigger stamp FIFO.
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
index 41ece1d85315..4cfbffd8414a 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
@@ -14,7 +14,7 @@ description: |
   Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller
   (EC) and controlled via a host-command interface.
   An EC PWM node should be only found as a sub-node of the EC node (see
-  Documentation/devicetree/bindings/mfd/cros-ec.txt).
+  Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
 
 properties:
   compatible:
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/imx-pwm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
index 01df06777cba..379d693889f6 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@@ -19,9 +19,28 @@ properties:
       - 3
 
   compatible:
-    enum:
-      - fsl,imx1-pwm
-      - fsl,imx27-pwm
+    oneOf:
+      - enum:
+          - fsl,imx1-pwm
+          - fsl,imx27-pwm
+      - items:
+          - enum:
+              - fsl,imx25-pwm
+              - fsl,imx31-pwm
+              - fsl,imx50-pwm
+              - fsl,imx51-pwm
+              - fsl,imx53-pwm
+              - fsl,imx6q-pwm
+              - fsl,imx6sl-pwm
+              - fsl,imx6sll-pwm
+              - fsl,imx6sx-pwm
+              - fsl,imx6ul-pwm
+              - fsl,imx7d-pwm
+              - fsl,imx8mm-pwm
+              - fsl,imx8mn-pwm
+              - fsl,imx8mp-pwm
+              - fsl,imx8mq-pwm
+          - const: fsl,imx27-pwm
 
   reg:
     maxItems: 1
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
new file mode 100644
index 000000000000..981cfec53f37
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The controller supports one PWM channel and supports only four distinct
+  frequencies (250Hz, 500Hz, 1kHz, 2kHz).
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/pwm-sifive.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
deleted file mode 100644
index 3d1dd7b06efc..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-SiFive PWM controller
-
-Unlike most other PWM controllers, the SiFive PWM controller currently only
-supports one period for all channels in the PWM. All PWMs need to run at
-the same period. The period also has significant restrictions on the values
-it can achieve, which the driver rounds to the nearest achievable period.
-PWM RTL that corresponds to the IP block version numbers can be found
-here:
-
-https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm
-
-Required properties:
-- compatible: Should be "sifive,<chip>-pwm" and "sifive,pwm<version>".
-  Supported compatible strings are: "sifive,fu540-c000-pwm" for the SiFive
-  PWM v0 as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the
-  SiFive PWM v0 IP block with no chip integration tweaks.
-  Please refer to sifive-blocks-ip-versioning.txt for details.
-- reg: physical base address and length of the controller's registers
-- clocks: Should contain a clock identifier for the PWM's parent clock.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory
-  for a description of the cell format.
-- interrupts: one interrupt per PWM channel
-
-Examples:
-
-pwm:  pwm@10020000 {
-	compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
-	reg = <0x0 0x10020000 0x0 0x1000>;
-	clocks = <&tlclk>;
-	interrupt-parent = <&plic>;
-	interrupts = <42 43 44 45>;
-	#pwm-cells = <3>;
-};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
new file mode 100644
index 000000000000..5ac25275d8bf
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-sifive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive PWM controller
+
+maintainers:
+  - Yash Shah <yash.shah@sifive.com>
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+  Unlike most other PWM controllers, the SiFive PWM controller currently
+  only supports one period for all channels in the PWM. All PWMs need to
+  run at the same period. The period also has significant restrictions on
+  the values it can achieve, which the driver rounds to the nearest
+  achievable period. PWM RTL that corresponds to the IP block version
+  numbers can be found here -
+
+  https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm
+
+properties:
+  compatible:
+    items:
+      - const: sifive,fu540-c000-pwm
+      - const: sifive,pwm0
+    description:
+      Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". Supported
+      compatible strings are "sifive,fu540-c000-pwm" for the SiFive PWM v0
+      as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the
+      SiFive PWM v0 IP block with no chip integration tweaks.
+      Please refer to sifive-blocks-ip-versioning.txt for details.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  interrupts:
+    maxItems: 4
+    description:
+      Each PWM instance in FU540-C000 has 4 comparators. One interrupt per comparator.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#pwm-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm:  pwm@10020000 {
+      compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
+      reg = <0x10020000 0x1000>;
+      clocks = <&tlclk>;
+      interrupt-parent = <&plic>;
+      interrupts = <42>, <43>, <44>, <45>;
+      #pwm-cells = <3>;
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/pwm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/pwm.yaml
index fa4f9de92090..7d1f687cee9c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/pwm.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/pwm.yaml
@@ -20,6 +20,8 @@ properties:
 required:
   - "#pwm-cells"
 
+additionalProperties: true
+
 examples:
   - |
     pwm: pwm@7000a000 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
index daadde9ff9c4..3c2fa2e93d1b 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,pwm-r8a7742   # RZ/G1H
           - renesas,pwm-r8a7743   # RZ/G1M
           - renesas,pwm-r8a7744   # RZ/G1N
           - renesas,pwm-r8a7745   # RZ/G1E
@@ -20,6 +21,7 @@ properties:
           - renesas,pwm-r8a774a1  # RZ/G2M
           - renesas,pwm-r8a774b1  # RZ/G2N
           - renesas,pwm-r8a774c0  # RZ/G2E
+          - renesas,pwm-r8a774e1  # RZ/G2H
           - renesas,pwm-r8a7778   # R-Car M1A
           - renesas,pwm-r8a7779   # R-Car H1
           - renesas,pwm-r8a7790   # R-Car H2
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
index 4bf62a3d5bba..aa9a4570c906 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
@@ -15,6 +15,7 @@ properties:
       - enum:
           - renesas,tpu-r8a73a4   # R-Mobile APE6
           - renesas,tpu-r8a7740   # R-Mobile A1
+          - renesas,tpu-r8a7742   # RZ/G1H
           - renesas,tpu-r8a7743   # RZ/G1M
           - renesas,tpu-r8a7744   # RZ/G1N
           - renesas,tpu-r8a7745   # RZ/G1E
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 3dbb9cf86f15..92211f2b3b0c 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -73,6 +73,8 @@ required:
   - compatible
   - regulator-name
 
+unevaluatedProperties: false
+
 examples:
   - |
     reg_1v8: regulator-1v8 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
index c9453d7ce227..69e5402da761 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi0 {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index 605590384b48..f7e3d8fd3bf3 100644
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -91,6 +91,8 @@ required:
   - gpios
   - states
 
+unevaluatedProperties: false
+
 examples:
   - |
     gpio-regulator {
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/mp886x.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/mp886x.txt
deleted file mode 100644
index 551867829459..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/mp886x.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Monolithic Power Systems MP8867/MP8869 voltage regulator
-
-Required properties:
-- compatible: Must be one of the following.
-	"mps,mp8867"
-	"mps,mp8869"
-- reg: I2C slave address.
-- enable-gpios: enable gpios.
-- mps,fb-voltage-divider: An array of two integers containing the resistor
-  values R1 and R2 of the feedback voltage divider in kilo ohms.
-
-Any property defined as part of the core regulator binding, defined in
-./regulator.txt, can also be used.
-
-Example:
-
-	vcpu: regulator@62 {
-		compatible = "mps,mp8869";
-		regulator-name = "vcpu";
-		regulator-min-microvolt = <700000>;
-		regulator-max-microvolt = <850000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
-		mps,fb-voltage-divider = <80 240>;
-		reg = <0x62>;
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
new file mode 100644
index 000000000000..9245b7199439
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems MP8867/MP8869 voltage regulator
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mps,mp8867
+      - mps,mp8869
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  mps,fb-voltage-divider:
+    description: An array of two integers containing the resistor
+      values R1 and R2 of the feedback voltage divider in kilo ohms.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    maxItems: 2
+
+  mps,switch-frequency-hz:
+    description: The valid switch frequency in Hertz.
+    enum: [500000, 750000, 1000000, 1250000, 1500000]
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mps,fb-voltage-divider
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@62 {
+          compatible = "mps,mp8869";
+          regulator-name = "vcpu";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1150000>;
+          enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+          mps,fb-voltage-divider = <80 240>;
+          reg = <0x62>;
+        };
+    };
+
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
new file mode 100644
index 000000000000..a462d99a25cc
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 Regulator from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  list of regulators provided by this controller, must be named
+  after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7
+
+properties:
+  compatible:
+    const: mediatek,mt6360-regulator
+
+  LDO_VIN1-supply:
+    description: Input supply phandle(s) for LDO1/2/3
+  LDO_VIN2-supply:
+    description: Input supply phandle(s) for LDO5
+  LDO_VIN3-supply:
+    description: Input supply phandle(s) for LDO6/7
+
+patternProperties:
+  "^buck[12]$":
+    $ref: "regulator.yaml#"
+
+  "^ldo[123567]$":
+    $ref: "regulator.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    regulator {
+      compatible = "mediatek,mt6360-regulator";
+      LDO_VIN3-supply = <&BUCK2>;
+      buck1 {
+        regulator-compatible = "BUCK1";
+        regulator-name = "mt6360,buck1";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      BUCK2: buck2 {
+        regulator-compatible = "BUCK2";
+        regulator-name = "mt6360,buck2";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      ldo6 {
+        regulator-compatible = "LDO6";
+        regulator-name = "mt6360,ldo6";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo7 {
+        regulator-compatible = "LDO7";
+        regulator-name = "mt6360,ldo7";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo1 {
+        regulator-compatible = "LDO1";
+        regulator-name = "mt6360,ldo1";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+        ldo2 {
+        regulator-compatible = "LDO2";
+        regulator-name = "mt6360,ldo2";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo3 {
+        regulator-compatible = "LDO3";
+        regulator-name = "mt6360,ldo3";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo5 {
+        regulator-compatible = "LDO5";
+        regulator-name = "mt6360,ldo5";
+        regulator-min-microvolt = <2700000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+    };
+...
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/pfuze100.txt linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/pfuze100.txt
deleted file mode 100644
index 4d3b12b92cb3..000000000000
--- linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ /dev/null
@@ -1,394 +0,0 @@
-PFUZE100 family of regulators
-
-Required properties:
-- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001"
-- reg: I2C slave address
-
-Optional properties:
-- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch
-  regulators to save power consumption. Attention, ensure that all important
-  regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
-  property. If not present, the switched regulators are always on and can't be
-  disabled. This binding is a workaround to keep backward compatibility with
-  old dtb's which rely on the fact that the switched regulators are always on
-  and don't mark them explicit as "regulator-always-on".
-- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
-  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
-  Use this option if the SoC should be powered off by external power
-  management IC (PMIC) on PMIC_STBY_REQ signal.
-  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
-
-Required child node:
-- regulators: This is the list of child nodes that specify the regulator
-  initialization data for defined regulators. Please refer to below doc
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-
-  The valid names for regulators are:
-  --PFUZE100
-  sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
-  --PFUZE200
-  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
-  --PFUZE3000
-  sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
-  --PFUZE3001
-  sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
-
-Each regulator is defined using the standard binding for regulators.
-
-Example 1: PFUZE100
-
-	pfuze100: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-
-Example 2: PFUZE200
-
-	pfuze200: pmic@8 {
-		compatible = "fsl,pfuze200";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			coin_reg: coin {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-Example 3: PFUZE3000
-
-	pfuze3000: pmic@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-Example 4: PFUZE 3001
-
-	pfuze3001: pmic@8 {
-		compatible = "fsl,pfuze3001";
-		reg = <0x08>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/pfuze100.yaml linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/pfuze100.yaml
new file mode 100644
index 000000000000..f578e72778a7
--- /dev/null
+++ linux-libre-5.10-rc7-gnu/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pfuze100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PFUZE100 family of regulators
+
+maintainers:
+  - Robin Gong <yibin.gong@nxp.com>
+
+description: |
+  The valid names for regulators are:
+  --PFUZE100
+  sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
+  --PFUZE200
+  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
+  --PFUZE3000
+  sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+  --PFUZE3001
+  sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+
+  Each regulator is defined using the standard binding for regulators.
+
+properties:
+  $nodename:
+    pattern: "^pmic@[0-9]$"
+
+  compatible:
+    enum:
+      - fsl,pfuze100
+      - fsl,pfuze200
+      - fsl,pfuze3000
+      - fsl,pfuze3001
+
+  reg:
+    maxItems: 1
+
+  fsl,pfuze-support-disable-sw:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Boolean, if present disable all unused switch regulators to save power
+      consumption. Attention, ensure that all important regulators
+      (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property.
+      If not present, the switched regulators are always on and can't be
+      disabled. This binding is a workaround to keep backward compatibility
+      with old dtb's which rely on the fact that the switched regulators are
+      always on and don't mark them explicit as "regulator-always-on".
+
+  fsl,pmic-stby-poweroff:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      if present, configure the PMIC to shutdown all
+      power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+      Use this option if the SoC should be powered off by external power management
+      IC (PMIC) on PMIC_STBY_REQ signal.
+      As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller.
+
+    patternProperties:
+      "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
+        $ref: "regulator.yaml#"
+        type: object
+
+      "^vgen[1-6]$":
+        $ref: "regulator.yaml#"
+        type: object
+
+      "^(vsnvs|vref|vrefddr|swbst|coin)$":
+        $ref: "regulator.yaml#"
+        type: object
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@8 {
+            compatible = "fsl,pfuze100";
+            reg = <0x08>;
+
+            regulators {
+                sw1a_reg: sw1ab {
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1875000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <6250>;
+                };
+
+                sw1c_reg: sw1c {
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1875000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw2_reg: sw2 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw3a_reg: sw3a {
+                    regulator-min-microvolt = <400000>;
+                    regulator-max-microvolt = <1975000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw3b_reg: sw3b {
+                    regulator-min-microvolt = <400000>;
+                    regulator-max-microvolt = <1975000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw4_reg: sw4 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                swbst_reg: swbst {
+                    regulator-min-microvolt = <5000000>;
+                    regulator-max-microvolt = <5150000>;
+                };
+
+                snvs_reg: vsnvs {
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                vref_reg: vrefddr {
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                vgen1_reg: vgen1 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1550000>;
+                };
+
+                vgen2_reg: vgen2 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1550000>;
+                };
+
+                vgen3_reg: vgen3 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                vgen4_reg: vgen4 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vgen5_reg: vgen5 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vgen6_reg: vgen6 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git linux-libre-5.9-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm