diff --git linux-libre-5.10.52-gnu/Makefile linux-libre-5.10.53-gnu/Makefile
index 7c3229c00796..affec0865cce 100644
--- linux-libre-5.10.52-gnu/Makefile
+++ linux-libre-5.10.53-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 52
+SUBLEVEL = 53
 EXTRAVERSION = -gnu
 NAME = Dare mighty things
 
@@ -704,11 +704,12 @@ $(KCONFIG_CONFIG):
 # This exploits the 'multi-target pattern rule' trick.
 # The syncconfig should be executed only once to make all the targets.
 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
-quiet_cmd_syncconfig = SYNC    $@
-      cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig
-
+#
+# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
+# so you cannot notice that Kconfig is waiting for the user input.
 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
-	+$(call cmd,syncconfig)
+	$(Q)$(kecho) "  SYNC    $@"
+	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 else # !may-sync-config
 # External modules and some install targets need include/generated/autoconf.h
 # and include/config/auto.conf but do not care if they are up-to-date.
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-baltos.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-baltos.dtsi
index b7f64c7ba83d..77e23e736854 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-baltos.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -393,10 +393,10 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
-&gpio3 {
+&gpio3_target {
 	ti,no-reset-on-init;
 };
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-evmsk.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-evmsk.dts
index b43b94122d3c..bf05b68274c2 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-evmsk.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-evmsk.dts
@@ -648,7 +648,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c23d2e..8121a199607c 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -150,7 +150,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4ad967..39e5d2ce600a 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -353,7 +353,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am33xx-l4.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
index ea20e4bdf040..29fafb67cfaa 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1723,7 +1723,7 @@
 			};
 		};
 
-		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0xae000 0x4>,
 			      <0xae010 0x4>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am437x-gp-evm.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/am437x-gp-evm.dts
index 6e4d05d649e9..033b984ff637 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am437x-gp-evm.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -813,11 +813,14 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	p8 {
 		/*
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am437x-l4.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/am437x-l4.dtsi
index 243e35f7a56c..370c4e64676f 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am437x-l4.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2033,7 +2033,7 @@
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2bfb683..aed81568a297 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
@@ -610,12 +610,11 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index c76b0046b402..5a4e137fec21 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -156,10 +156,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 
 	pin_mclr_vpp {
 		gpio-hog;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index e86c22ce6d12..0e8851cec979 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -127,10 +127,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 };
 
 &fmc {
@@ -180,6 +177,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
 };
 
 &fsim0 {
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi
index dacaef2c14ca..ea3dc128b764 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -460,7 +460,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm-hr2.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm-hr2.dtsi
index e8df458aad39..84cda16f68a2 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm-hr2.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
index e895f7cb8c9f..605b6d2f4a56 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -269,7 +269,7 @@
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2711-rpi-4-b.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 09a1182c2936..5395e8c2484e 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -28,11 +28,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2711.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2711.dtsi
index 4847dd305317..3d040f6e2a20 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2711.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2711.dtsi
@@ -395,7 +395,7 @@
 		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
 		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
 
-		emmc2: emmc2@7e340000 {
+		emmc2: mmc@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
 			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..40b9405f1a8e 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-a.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48346ff..11edb581dbaf 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c229cdc..1b435c64bd9c 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..a23c25c00eea 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..1b63d6b19750 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..e4e6b6abbfc1 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c01e31..33b2b77aa47d 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-zero.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6f4966..6f9b3a908f28 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b21f7e..87ddcad76083 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2836-rpi-2-b.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a680394a..d8af8eeac7b6 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be0332c1c8..77099a7871b0 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 37343148643d..61010266ca9a 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa355c9..dd4a48604097 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37c22f0..828a20561b96 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm283x.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm283x.dtsi
index b83a864e2e8b..0f3be55201a5 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm283x.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm283x.dtsi
@@ -420,7 +420,7 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		sdhci: mmc@7e300000 {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm63138.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..cca49a2e2d62 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm63138.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm7445.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm7445.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm911360_entphn.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..a76c74b44bba 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm911360_entphn.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958300k.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958300k.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958305k.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958305k.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958522er.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958522er.dts
index 7be4c4e628e0..5dd1001255c6 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958522er.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958522er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958525er.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958525er.dts
index e58ed7e95346..0e624c57b585 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958525er.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958525er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958525xmc.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958525xmc.dts
index 21f922dc6019..2ac6d61ad297 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958525xmc.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958525xmc.dts
@@ -90,8 +90,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958622hr.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958622hr.dts
index a49c2fd21f4a..e072fa83537a 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958622hr.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958622hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958623hr.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958623hr.dts
index dd6dff6452b8..835f4765efbc 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958623hr.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958623hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958625hr.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958625hr.dts
index a71371b4065e..57974b8fab86 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958625hr.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958625hr.dts
@@ -89,8 +89,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958625k.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958625k.dts
index 7782b61c51a1..45a043ea77ce 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm958625k.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm958625k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm963138dvt.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..df5c8ab90627 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm963138dvt.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm988312hr.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm988312hr.dts
index edd0f630e025..16b212cc8a2a 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/bcm988312hr.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/dm816x.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..1825d912b8ab 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/dm816x.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/dm816x.dtsi
@@ -351,7 +351,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a1c365..a5bdc6431d8d 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
 };
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra7-l4.dtsi
index 1dafce92fc76..30b72f431850 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1315,7 +1315,7 @@
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1348,7 +1348,7 @@
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra72x.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra72x.dtsi
index f3e934ef7d3e..90617261373c 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra72x.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -90,7 +90,7 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4b77f9..3256631510c5 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
 #include "dra7-ipu-dsp-common.dtsi"
 
 &mailbox6 {
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra74x.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra74x.dtsi
index b4e07d99ffde..cfb39dde4930 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/dra74x.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/dra74x.dtsi
@@ -145,12 +145,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -158,12 +158,12 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-dlink-dns-313.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index c6f3d90e3e90..b8acc6eaaa6d 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-nas4220b.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
index 43c45f7e1e0a..13112a8a5dd8 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-rut1xx.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-rut1xx.dts
index 08091d2a64e1..0ebda4efd9d0 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-rut1xx.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-wbd111.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..5602ba8f30f2 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-wbd111.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-wbd222.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..a4a260c36d75 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini-wbd222.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini.dtsi
index 065ed10a79fa..07448c03dac9 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/gemini.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@
 			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 5f84e9f2b576..33a70f436aa3 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -315,8 +315,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -403,6 +403,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/omap4-l4.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/omap4-l4.dtsi
index de742bf84efb..5015df4d876c 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/omap4-l4.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/omap4-l4.dtsi
@@ -597,11 +597,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/omap5-l4.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/omap5-l4.dtsi
index f3d3a16b7c64..c67c8698cc30 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/omap5-l4.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/omap5-l4.dtsi
@@ -613,11 +613,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3036-kylin.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3036-kylin.dts
index 7154b827ea2f..e817eba8c622 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3036-kylin.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
 		};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3066a.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3066a.dtsi
index 252750c97f97..bbc3bff50856 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3066a.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3066a.dtsi
@@ -755,7 +755,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3066_PD_VIO {
+		power-domain@RK3066_PD_VIO {
 			reg = <RK3066_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -782,7 +782,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3066_PD_VIDEO {
+		power-domain@RK3066_PD_VIDEO {
 			reg = <RK3066_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -791,7 +791,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3066_PD_GPU {
+		power-domain@RK3066_PD_GPU {
 			reg = <RK3066_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3188.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3188.dtsi
index 2298a8d840ba..b6bde9d12c2b 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3188.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
 	};
 
 	timer6: timer@200380a0 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x200380a0 0x20>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
 	};
 
 	i2s0: i2s@1011a000 {
@@ -699,7 +699,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3188_PD_VIO {
+		power-domain@RK3188_PD_VIO {
 			reg = <RK3188_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -721,7 +721,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3188_PD_VIDEO {
+		power-domain@RK3188_PD_VIDEO {
 			reg = <RK3188_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -730,7 +730,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3188_PD_GPU {
+		power-domain@RK3188_PD_GPU {
 			reg = <RK3188_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk322x.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk322x.dtsi
index 48e6e8d44a1a..7de8b006ca13 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk322x.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk322x.dtsi
@@ -524,7 +524,7 @@
 		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
 		pinctrl-2 = <&otp_pin>;
-		#thermal-sensor-cells = <0>;
+		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
 	};
@@ -565,10 +565,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20020800 0x100>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -576,10 +575,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -609,7 +607,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -630,10 +627,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3288-rock2-som.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 44bb5e6f83b1..76363b8afcb9 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@
 	flash0-supply = <&vcc_flash>;
 	flash1-supply = <&vccio_pmu>;
 	gpio30-supply = <&vccio_pmu>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3288-vyasa.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3288-vyasa.dts
index aa50f8ed4ca0..b156a83eb7d7 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3288-vyasa.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -379,10 +379,10 @@
 	audio-supply = <&vcc_18>;
 	bb-supply = <&vcc_io>;
 	dvp-supply = <&vcc_io>;
-	flash0-suuply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
 	flash1-supply = <&vcc_lan>;
 	gpio30-supply = <&vcc_io>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3288.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3288.dtsi
index 68d5a58cfe88..0d89ad274268 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/rk3288.dtsi
@@ -240,8 +240,8 @@
 		compatible = "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	display-subsystem {
@@ -788,7 +788,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -830,7 +830,7 @@
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -844,7 +844,7 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -855,7 +855,7 @@
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu_r>,
@@ -1593,7 +1593,7 @@
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
 			};
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-ab8500.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-ab8500.dtsi
index aab5719cc1a9..16d50369226a 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-ab8500.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -34,7 +34,7 @@
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpio {
+				ab8500_gpio: ab8500-gpiocontroller {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -42,15 +42,15 @@
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				gpadc: ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+						     <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					#address-cells = <1>;
@@ -169,13 +169,13 @@
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -192,8 +192,8 @@
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-ab8505.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-ab8505.dtsi
index 67bc69e67b33..8d2cda0b4d62 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-ab8505.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -30,7 +30,7 @@
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpio {
+				ab8505_gpio: ab8505-gpiocontroller {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -38,8 +38,8 @@
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
@@ -131,13 +131,13 @@
 
 				ab8500_usb: ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -154,8 +154,8 @@
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-href-ab8500.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 4946743de7b9..3ccb7b5c7162 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index c0de1337bdaa..457bddabc32c 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -19,6 +19,9 @@
 					     <19 IRQ_TYPE_EDGE_RISING>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
+				mount-matrix = "0", "-1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "-1";
 			};
 			magnetometer@1e {
 				compatible = "st,lsm303dlm-magn";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-href.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-href.dtsi
index 359c1219b0ba..3586b5d7876a 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-href.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-href.dtsi
@@ -224,7 +224,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 				};
 
 				ab8500_usb {
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-snowball.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-snowball.dts
index 27d8a07718a0..f6e0d71f6c09 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/ste-snowball.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32429i-eval.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32429i-eval.dts
index 67e7648de41e..8b0ead46ef9b 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32429i-eval.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32429i-eval.dts
@@ -119,17 +119,15 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32746g-eval.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32746g-eval.dts
index ca8c192449ee..327613fd9666 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32746g-eval.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f429-disco.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f429-disco.dts
index 3dc068b91ca1..075ac57d0bf4 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f429-disco.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f429-disco.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f429.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f429.dtsi
index ad715a0e1c9a..0dc5fa94dbdf 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f429.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -633,8 +629,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +643,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
@@ -709,7 +701,7 @@
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f469-disco.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f469-disco.dts
index 2e1b3bbbe4b5..8c982ae79f43 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f469-disco.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f469-disco.dts
@@ -104,12 +104,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f746.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f746.dtsi
index 640ff54ed00c..d49e481b3aa6 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f746.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -364,9 +360,9 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
@@ -531,8 +527,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +541,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f769-disco.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f769-disco.dts
index 0ce7fbc20fa4..be943b701980 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32f769-disco.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32h743.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32h743.dtsi
index 7febe19e780d..1579707ea566 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32h743.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32h743.dtsi
@@ -454,8 +454,6 @@
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -470,8 +468,6 @@
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp151.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp151.dtsi
index 84757901cd8d..b479016fef00 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp151.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1395,12 +1395,6 @@
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1424,6 +1418,12 @@
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usbh-ohci@5800c000 {
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 58275bcf9e26..4dd138d691c7 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -208,7 +206,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -219,13 +216,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0a9e69..2d9461006810 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -173,8 +173,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -197,7 +195,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -213,7 +210,7 @@
 			 vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			 };
 		};
 
@@ -269,7 +266,7 @@
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index a7ffec8f1516..be1dd5e9e744 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -64,7 +64,7 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 8456f172d4b1..59b3239bcd76 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -34,7 +34,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		/*
@@ -60,7 +59,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#size-cells = <0>;
 
 		button-1 {
 			label = "TA2-GPIO-B";
@@ -184,12 +182,11 @@
 
 	};
 
-	polytouch@38 {
-		compatible = "edt,edt-ft5x06";
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
 		interrupt-parent = <&gpiog>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		linux,wakeup;
 	};
 };
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 27f19575fada..8221bf69fefe 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -234,8 +234,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -257,7 +255,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -273,7 +270,7 @@
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
@@ -338,7 +335,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 803eb8bc9c85..a9eb82b2f170 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -194,7 +194,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: spi-flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a95795..6706d8311a66 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -146,8 +146,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -171,7 +169,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -182,13 +179,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 068aabcffb13..5d0f0fbba1d2 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -1009,7 +1009,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
 		nvidia,headset;
 
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-harmony.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-harmony.dts
index 86494cb4d5a1..ae4312eedcbd 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-harmony.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-harmony.dts
@@ -748,7 +748,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts
index a348ca30e522..b31c9bca16e6 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -84,7 +84,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-plutux.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-plutux.dts
index 378f23b2958b..5811b7006a9b 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-plutux.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-plutux.dts
@@ -52,7 +52,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-seaboard.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-seaboard.dts
index c24d4a37613e..92d494b8c3d2 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-seaboard.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -911,7 +911,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-tec.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-tec.dts
index 44ced60315de..10ff09d86efa 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-tec.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-tec.dts
@@ -61,7 +61,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-ventana.dts linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-ventana.dts
index 055334ae3d28..fe400fb84f02 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra20-ventana.dts
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra20-ventana.dts
@@ -686,7 +686,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index bfc06b988781..215e497652d8 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -143,7 +143,7 @@
 	};
 
 	vdd_3v3_sys: regulator@1 {
-		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
diff --git linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi
index dab9989fa760..57aead7d8162 100644
--- linux-libre-5.10.52-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -589,7 +589,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10.52-gnu/arch/arm/mach-imx/suspend-imx53.S linux-libre-5.10.53-gnu/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad65363..46570ec2fbcf 100644
--- linux-libre-5.10.52-gnu/arch/arm/mach-imx/suspend-imx53.S
+++ linux-libre-5.10.53-gnu/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
diff --git linux-libre-5.10.52-gnu/arch/arm/mach-omap2/pm33xx-core.c linux-libre-5.10.53-gnu/arch/arm/mach-omap2/pm33xx-core.c
index 56f2c0bcae5a..e3b783bbc626 100644
--- linux-libre-5.10.52-gnu/arch/arm/mach-omap2/pm33xx-core.c
+++ linux-libre-5.10.53-gnu/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@
 
 #include <linux/cpuidle.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
@@ -324,6 +325,43 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
 		return NULL;
 }
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc /*(DEBLOBBED)*/
+static int amx3_suspend_block(suspend_state_t state)
+{
+	pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or /*(DEBLOBBED)*/\n");
+
+	return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+	.begin = amx3_suspend_block,
+	.valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+	suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif	/* CONFIG_SUSPEND */
+
 int __init amx3_common_pm_init(void)
 {
 	struct am33xx_pm_platform_data *pdata;
@@ -337,6 +375,7 @@ int __init amx3_common_pm_init(void)
 	devinfo.size_data = sizeof(*pdata);
 	devinfo.id = -1;
 	platform_device_register_full(&devinfo);
+	amx3_block_suspend();
 
 	return 0;
 }
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
index f6c55877fbd9..2c0161125ece 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -564,13 +564,13 @@
 		clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi-dvfs {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>, <1>, <2>;
 				clock-output-names = "atlclk", "aplclk","gpuclk";
 			};
-			scpi_clk: scpi-clk {
+			scpi_clk: clocks-1 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
 				clock-indices = <3>;
@@ -578,7 +578,7 @@
 			};
 		};
 
-		scpi_devpd: scpi-power-domains {
+		scpi_devpd: power-controller {
 			compatible = "arm,scpi-power-domains";
 			num-domains = <2>;
 			#power-domain-cells = <1>;
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index e7abb74bd816..4d34d82b898a 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -625,7 +625,6 @@
 			clocks = <&clockgen 4 3>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
-			bus-num = <0>;
 		};
 
 		esdhc: esdhc@2140000 {
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9dfa6d4e6550..a40b66f44b31 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1258,6 +1258,14 @@
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
@@ -1287,6 +1295,14 @@
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index cca143e4b6bf..389aebdb35f1 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -108,10 +108,8 @@
 	};
 
 	firmware {
-		turris-mox-rwtm {
-			compatible = "cznic,turris-mox-rwtm";
-			mboxes = <&rwtm 0>;
-			status = "okay";
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
 		};
 	};
 };
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 879115dfdf82..83d2d83f7692 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -502,4 +502,12 @@
 			};
 		};
 	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
 };
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dts
index ce49a70d88a0..d24294888400 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -258,7 +258,7 @@
 			};
 			partition@200000 {
 				label = "Linux";
-				reg = <0x200000 0xd00000>;
+				reg = <0x200000 0xe00000>;
 			};
 			partition@1000000 {
 				label = "Filesystem";
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/qcom/sc7180-idp.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a..afe0f9c25816 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -45,7 +45,7 @@
 
 /* Increase the size from 2MB to 8MB */
 &rmtfs_mem {
-	reg = <0x0 0x84400000 0x0 0x800000>;
+	reg = <0x0 0x94600000 0x0 0x800000>;
 };
 
 / {
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
index 64193292d26c..0d6761074b11 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -244,20 +244,20 @@
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_usb@PX30_PD_USB {
+			power-domain@PX30_PD_USB {
 				reg = <PX30_PD_USB>;
 				clocks = <&cru HCLK_HOST>,
 					 <&cru HCLK_OTG>,
 					 <&cru SCLK_OTG_ADP>;
 				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
 			};
-			pd_sdcard@PX30_PD_SDCARD {
+			power-domain@PX30_PD_SDCARD {
 				reg = <PX30_PD_SDCARD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sdmmc>;
 			};
-			pd_gmac@PX30_PD_GMAC {
+			power-domain@PX30_PD_GMAC {
 				reg = <PX30_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>,
@@ -265,7 +265,7 @@
 					 <&cru SCLK_GMAC_RX_TX>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_mmc_nand@PX30_PD_MMC_NAND {
+			power-domain@PX30_PD_MMC_NAND {
 				reg = <PX30_PD_MMC_NAND>;
 				clocks =  <&cru HCLK_NANDC>,
 					  <&cru HCLK_EMMC>,
@@ -278,14 +278,14 @@
 				pm_qos = <&qos_emmc>, <&qos_nand>,
 					 <&qos_sdio>, <&qos_sfc>;
 			};
-			pd_vpu@PX30_PD_VPU {
+			power-domain@PX30_PD_VPU {
 				reg = <PX30_PD_VPU>;
 				clocks = <&cru ACLK_VPU>,
 					 <&cru HCLK_VPU>,
 					 <&cru SCLK_CORE_VPU>;
 				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
 			};
-			pd_vo@PX30_PD_VO {
+			power-domain@PX30_PD_VO {
 				reg = <PX30_PD_VO>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru ACLK_VOPB>,
@@ -301,7 +301,7 @@
 				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
 					 <&qos_vop_m0>, <&qos_vop_m1>;
 			};
-			pd_vi@PX30_PD_VI {
+			power-domain@PX30_PD_VI {
 				reg = <PX30_PD_VI>;
 				clocks = <&cru ACLK_CIF>,
 					 <&cru ACLK_ISP>,
@@ -312,7 +312,7 @@
 					 <&qos_isp_wr>, <&qos_isp_m1>,
 					 <&qos_vip>;
 			};
-			pd_gpu@PX30_PD_GPU {
+			power-domain@PX30_PD_GPU {
 				reg = <PX30_PD_GPU>;
 				clocks = <&cru SCLK_GPU>;
 				pm_qos = <&qos_gpu>;
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 7a96be10eaf0..bce6f8b7db43 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -78,8 +78,8 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 1eecad724f04..83a0bdbe00d6 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -71,8 +71,8 @@
 		regulator-settling-time-us = <5000>;
 		regulator-type = "voltage";
 		startup-delay-us = <2000>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		vin-supply = <&vcc_io_33>;
 	};
 
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index b76282e704de..daa9a0c601a9 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -45,8 +45,8 @@
 	vcc_sdio: sdmmcio-regulator {
 		compatible = "regulator-gpio";
 		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		regulator-name = "vcc_sdio";
 		regulator-type = "voltage";
 		regulator-min-microvolt = <1800000>;
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index de1e5e8a0e88..e546c9d1d646 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -318,13 +318,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pd_hevc@RK3328_PD_HEVC {
+			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
 			};
-			pd_video@RK3328_PD_VIDEO {
+			power-domain@RK3328_PD_VIDEO {
 				reg = <RK3328_PD_VIDEO>;
 			};
-			pd_vpu@RK3328_PD_VPU {
+			power-domain@RK3328_PD_VPU {
 				reg = <RK3328_PD_VPU>;
 				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 			};
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 60cd1c18cd4e..e9ecffc409c0 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -245,7 +245,7 @@ pp1800_pcie: &pp1800_s0 {
 };
 
 &ppvar_sd_card_io {
-	states = <1800000 0x0 3300000 0x1>;
+	states = <1800000 0x0>, <3300000 0x1>;
 	regulator-max-microvolt = <3300000>;
 };
 
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 32dcaf210085..765b24a2bcbf 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -247,8 +247,8 @@
 		enable-active-high;
 		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3000000 0x0>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3000000>;
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 7e69603fb41c..4b6065dbba55 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1000,26 +1000,26 @@
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_CENTER */
-			pd_iep@RK3399_PD_IEP {
+			power-domain@RK3399_PD_IEP {
 				reg = <RK3399_PD_IEP>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru HCLK_IEP>;
 				pm_qos = <&qos_iep>;
 			};
-			pd_rga@RK3399_PD_RGA {
+			power-domain@RK3399_PD_RGA {
 				reg = <RK3399_PD_RGA>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru HCLK_RGA>;
 				pm_qos = <&qos_rga_r>,
 					 <&qos_rga_w>;
 			};
-			pd_vcodec@RK3399_PD_VCODEC {
+			power-domain@RK3399_PD_VCODEC {
 				reg = <RK3399_PD_VCODEC>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
 				pm_qos = <&qos_video_m0>;
 			};
-			pd_vdu@RK3399_PD_VDU {
+			power-domain@RK3399_PD_VDU {
 				reg = <RK3399_PD_VDU>;
 				clocks = <&cru ACLK_VDU>,
 					 <&cru HCLK_VDU>;
@@ -1028,94 +1028,94 @@
 			};
 
 			/* These power domains are grouped by VD_GPU */
-			pd_gpu@RK3399_PD_GPU {
+			power-domain@RK3399_PD_GPU {
 				reg = <RK3399_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu>;
 			};
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_edp@RK3399_PD_EDP {
+			power-domain@RK3399_PD_EDP {
 				reg = <RK3399_PD_EDP>;
 				clocks = <&cru PCLK_EDP_CTRL>;
 			};
-			pd_emmc@RK3399_PD_EMMC {
+			power-domain@RK3399_PD_EMMC {
 				reg = <RK3399_PD_EMMC>;
 				clocks = <&cru ACLK_EMMC>;
 				pm_qos = <&qos_emmc>;
 			};
-			pd_gmac@RK3399_PD_GMAC {
+			power-domain@RK3399_PD_GMAC {
 				reg = <RK3399_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_sd@RK3399_PD_SD {
+			power-domain@RK3399_PD_SD {
 				reg = <RK3399_PD_SD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sd>;
 			};
-			pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+			power-domain@RK3399_PD_SDIOAUDIO {
 				reg = <RK3399_PD_SDIOAUDIO>;
 				clocks = <&cru HCLK_SDIO>;
 				pm_qos = <&qos_sdioaudio>;
 			};
-			pd_tcpc0@RK3399_PD_TCPD0 {
+			power-domain@RK3399_PD_TCPD0 {
 				reg = <RK3399_PD_TCPD0>;
 				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
 					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
 			};
-			pd_tcpc1@RK3399_PD_TCPD1 {
+			power-domain@RK3399_PD_TCPD1 {
 				reg = <RK3399_PD_TCPD1>;
 				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
 					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
 			};
-			pd_usb3@RK3399_PD_USB3 {
+			power-domain@RK3399_PD_USB3 {
 				reg = <RK3399_PD_USB3>;
 				clocks = <&cru ACLK_USB3>;
 				pm_qos = <&qos_usb_otg0>,
 					 <&qos_usb_otg1>;
 			};
-			pd_vio@RK3399_PD_VIO {
+			power-domain@RK3399_PD_VIO {
 				reg = <RK3399_PD_VIO>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				pd_hdcp@RK3399_PD_HDCP {
+				power-domain@RK3399_PD_HDCP {
 					reg = <RK3399_PD_HDCP>;
 					clocks = <&cru ACLK_HDCP>,
 						 <&cru HCLK_HDCP>,
 						 <&cru PCLK_HDCP>;
 					pm_qos = <&qos_hdcp>;
 				};
-				pd_isp0@RK3399_PD_ISP0 {
+				power-domain@RK3399_PD_ISP0 {
 					reg = <RK3399_PD_ISP0>;
 					clocks = <&cru ACLK_ISP0>,
 						 <&cru HCLK_ISP0>;
 					pm_qos = <&qos_isp0_m0>,
 						 <&qos_isp0_m1>;
 				};
-				pd_isp1@RK3399_PD_ISP1 {
+				power-domain@RK3399_PD_ISP1 {
 					reg = <RK3399_PD_ISP1>;
 					clocks = <&cru ACLK_ISP1>,
 						 <&cru HCLK_ISP1>;
 					pm_qos = <&qos_isp1_m0>,
 						 <&qos_isp1_m1>;
 				};
-				pd_vo@RK3399_PD_VO {
+				power-domain@RK3399_PD_VO {
 					reg = <RK3399_PD_VO>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					pd_vopb@RK3399_PD_VOPB {
+					power-domain@RK3399_PD_VOPB {
 						reg = <RK3399_PD_VOPB>;
 						clocks = <&cru ACLK_VOP0>,
 							 <&cru HCLK_VOP0>;
 						pm_qos = <&qos_vop_big_r>,
 							 <&qos_vop_big_w>;
 					};
-					pd_vopl@RK3399_PD_VOPL {
+					power-domain@RK3399_PD_VOPL {
 						reg = <RK3399_PD_VOPL>;
 						clocks = <&cru ACLK_VOP1>,
 							 <&cru HCLK_VOP1>;
@@ -2342,7 +2342,7 @@
 			};
 		};
 
-		sleep {
+		suspend {
 			ap_pwroff: ap-pwroff {
 				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
 			};
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index d12dd89f3405..937dd7280c7a 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -111,7 +111,7 @@
 			AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
 			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
 			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
-			AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+			AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
 			AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
 		>;
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index ef03e7636b66..e8a4143e1c24 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -29,7 +29,7 @@
 			J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
 			J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
 			J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
 			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
diff --git linux-libre-5.10.52-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts linux-libre-5.10.53-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 7cd31ac67f88..479abff9cb8e 100644
--- linux-libre-5.10.52-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ linux-libre-5.10.53-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -206,7 +206,7 @@
 			J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
 			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
 			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
 			J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
diff --git linux-libre-5.10.52-gnu/arch/ia64/include/asm/pgtable.h linux-libre-5.10.53-gnu/arch/ia64/include/asm/pgtable.h
index 779b6972aa84..9f64fdfbf275 100644
--- linux-libre-5.10.52-gnu/arch/ia64/include/asm/pgtable.h
+++ linux-libre-5.10.53-gnu/arch/ia64/include/asm/pgtable.h
@@ -520,8 +520,9 @@ extern struct page *zero_page_memmap_ptr;
 
 #  ifdef CONFIG_VIRTUAL_MEM_MAP
   /* arch mem_map init routine is needed due to holes in a virtual mem_map */
-    extern void memmap_init (unsigned long size, int nid, unsigned long zone,
-			     unsigned long start_pfn);
+void memmap_init(void);
+void arch_memmap_init(unsigned long size, int nid, unsigned long zone,
+		      unsigned long start_pfn);
 #  endif /* CONFIG_VIRTUAL_MEM_MAP */
 # endif /* !__ASSEMBLY__ */
 
diff --git linux-libre-5.10.52-gnu/arch/ia64/mm/init.c linux-libre-5.10.53-gnu/arch/ia64/mm/init.c
index 27ca549ff47e..f316a833b703 100644
--- linux-libre-5.10.52-gnu/arch/ia64/mm/init.c
+++ linux-libre-5.10.53-gnu/arch/ia64/mm/init.c
@@ -542,7 +542,7 @@ virtual_memmap_init(u64 start, u64 end, void *arg)
 }
 
 void __meminit
-memmap_init (unsigned long size, int nid, unsigned long zone,
+arch_memmap_init (unsigned long size, int nid, unsigned long zone,
 	     unsigned long start_pfn)
 {
 	if (!vmem_map) {
@@ -562,6 +562,10 @@ memmap_init (unsigned long size, int nid, unsigned long zone,
 	}
 }
 
+void __init memmap_init(void)
+{
+}
+
 int
 ia64_pfn_valid (unsigned long pfn)
 {
diff --git linux-libre-5.10.52-gnu/arch/s390/include/asm/stacktrace.h linux-libre-5.10.53-gnu/arch/s390/include/asm/stacktrace.h
index ee582896b6a3..90488b0c26f6 100644
--- linux-libre-5.10.52-gnu/arch/s390/include/asm/stacktrace.h
+++ linux-libre-5.10.53-gnu/arch/s390/include/asm/stacktrace.h
@@ -128,6 +128,103 @@ struct stack_frame {
 	r2;								\
 })
 
+#define CALL_LARGS_0(...)						\
+	long dummy = 0
+#define CALL_LARGS_1(t1, a1)						\
+	long arg1  = (long)(t1)(a1)
+#define CALL_LARGS_2(t1, a1, t2, a2)					\
+	CALL_LARGS_1(t1, a1);						\
+	long arg2 = (long)(t2)(a2)
+#define CALL_LARGS_3(t1, a1, t2, a2, t3, a3)				\
+	CALL_LARGS_2(t1, a1, t2, a2);					\
+	long arg3 = (long)(t3)(a3)
+#define CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4)			\
+	CALL_LARGS_3(t1, a1, t2, a2, t3, a3);				\
+	long arg4  = (long)(t4)(a4)
+#define CALL_LARGS_5(t1, a1, t2, a2, t3, a3, t4, a4, t5, a5)		\
+	CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4);			\
+	long arg5 = (long)(t5)(a5)
+
+#define CALL_REGS_0							\
+	register long r2 asm("2") = dummy
+#define CALL_REGS_1							\
+	register long r2 asm("2") = arg1
+#define CALL_REGS_2							\
+	CALL_REGS_1;							\
+	register long r3 asm("3") = arg2
+#define CALL_REGS_3							\
+	CALL_REGS_2;							\
+	register long r4 asm("4") = arg3
+#define CALL_REGS_4							\
+	CALL_REGS_3;							\
+	register long r5 asm("5") = arg4
+#define CALL_REGS_5							\
+	CALL_REGS_4;							\
+	register long r6 asm("6") = arg5
+
+#define CALL_TYPECHECK_0(...)
+#define CALL_TYPECHECK_1(t, a, ...)					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_2(t, a, ...)					\
+	CALL_TYPECHECK_1(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_3(t, a, ...)					\
+	CALL_TYPECHECK_2(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_4(t, a, ...)					\
+	CALL_TYPECHECK_3(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_5(t, a, ...)					\
+	CALL_TYPECHECK_4(__VA_ARGS__);					\
+	typecheck(t, a)
+
+#define CALL_PARM_0(...) void
+#define CALL_PARM_1(t, a, ...) t
+#define CALL_PARM_2(t, a, ...) t, CALL_PARM_1(__VA_ARGS__)
+#define CALL_PARM_3(t, a, ...) t, CALL_PARM_2(__VA_ARGS__)
+#define CALL_PARM_4(t, a, ...) t, CALL_PARM_3(__VA_ARGS__)
+#define CALL_PARM_5(t, a, ...) t, CALL_PARM_4(__VA_ARGS__)
+#define CALL_PARM_6(t, a, ...) t, CALL_PARM_5(__VA_ARGS__)
+
+/*
+ * Use call_on_stack() to call a function switching to a specified
+ * stack. Proper sign and zero extension of function arguments is
+ * done. Usage:
+ *
+ * rc = call_on_stack(nr, stack, rettype, fn, t1, a1, t2, a2, ...)
+ *
+ * - nr specifies the number of function arguments of fn.
+ * - stack specifies the stack to be used.
+ * - fn is the function to be called.
+ * - rettype is the return type of fn.
+ * - t1, a1, ... are pairs, where t1 must match the type of the first
+ *   argument of fn, t2 the second, etc. a1 is the corresponding
+ *   first function argument (not name), etc.
+ */
+#define call_on_stack(nr, stack, rettype, fn, ...)			\
+({									\
+	rettype (*__fn)(CALL_PARM_##nr(__VA_ARGS__)) = fn;		\
+	unsigned long frame = current_frame_address();			\
+	unsigned long __stack = stack;					\
+	unsigned long prev;						\
+	CALL_LARGS_##nr(__VA_ARGS__);					\
+	CALL_REGS_##nr;							\
+									\
+	CALL_TYPECHECK_##nr(__VA_ARGS__);				\
+	asm volatile(							\
+		"	lgr	%[_prev],15\n"				\
+		"	lg	15,%[_stack]\n"				\
+		"	stg	%[_frame],%[_bc](15)\n"			\
+		"	brasl	14,%[_fn]\n"				\
+		"	lgr	15,%[_prev]\n"				\
+		: [_prev] "=&d" (prev), CALL_FMT_##nr			\
+		: [_stack] "R" (__stack),				\
+		  [_bc] "i" (offsetof(struct stack_frame, back_chain)),	\
+		  [_frame] "d" (frame),					\
+		  [_fn] "X" (__fn) : CALL_CLOBBER_##nr);		\
+	(rettype)r2;							\
+})
+
 #define CALL_ON_STACK_NORETURN(fn, stack)				\
 ({									\
 	asm volatile(							\
diff --git linux-libre-5.10.52-gnu/arch/s390/kernel/traps.c linux-libre-5.10.53-gnu/arch/s390/kernel/traps.c
index 8d1e8a1a97df..16934fa19069 100644
--- linux-libre-5.10.52-gnu/arch/s390/kernel/traps.c
+++ linux-libre-5.10.53-gnu/arch/s390/kernel/traps.c
@@ -272,6 +272,8 @@ static void __init test_monitor_call(void)
 {
 	int val = 1;
 
+	if (!IS_ENABLED(CONFIG_BUG))
+		return;
 	asm volatile(
 		"	mc	0,0\n"
 		"0:	xgr	%0,%0\n"
diff --git linux-libre-5.10.52-gnu/arch/x86/events/intel/uncore_snbep.c linux-libre-5.10.53-gnu/arch/x86/events/intel/uncore_snbep.c
index 16159950fcf5..9c936d06fb61 100644
--- linux-libre-5.10.52-gnu/arch/x86/events/intel/uncore_snbep.c
+++ linux-libre-5.10.53-gnu/arch/x86/events/intel/uncore_snbep.c
@@ -3752,11 +3752,11 @@ static int skx_iio_set_mapping(struct intel_uncore_type *type)
 	/* One more for NULL. */
 	attrs = kcalloc((uncore_max_dies() + 1), sizeof(*attrs), GFP_KERNEL);
 	if (!attrs)
-		goto err;
+		goto clear_topology;
 
 	eas = kcalloc(uncore_max_dies(), sizeof(*eas), GFP_KERNEL);
 	if (!eas)
-		goto err;
+		goto clear_attrs;
 
 	for (die = 0; die < uncore_max_dies(); die++) {
 		sprintf(buf, "die%ld", die);
@@ -3777,7 +3777,9 @@ err:
 	for (; die >= 0; die--)
 		kfree(eas[die].attr.attr.name);
 	kfree(eas);
+clear_attrs:
 	kfree(attrs);
+clear_topology:
 	kfree(type->topology);
 clear_attr_update:
 	type->attr_update = NULL;
diff --git linux-libre-5.10.52-gnu/arch/x86/net/bpf_jit_comp.c linux-libre-5.10.53-gnu/arch/x86/net/bpf_jit_comp.c
index a11796bbb9ce..d5fa77256058 100644
--- linux-libre-5.10.52-gnu/arch/x86/net/bpf_jit_comp.c
+++ linux-libre-5.10.53-gnu/arch/x86/net/bpf_jit_comp.c
@@ -564,6 +564,9 @@ static void bpf_tail_call_direct_fixup(struct bpf_prog *prog)
 
 	for (i = 0; i < prog->aux->size_poke_tab; i++) {
 		poke = &prog->aux->poke_tab[i];
+		if (poke->aux && poke->aux != prog->aux)
+			continue;
+
 		WARN_ON_ONCE(READ_ONCE(poke->tailcall_target_stable));
 
 		if (poke->reason != BPF_POKE_REASON_TAIL_CALL)
diff --git linux-libre-5.10.52-gnu/drivers/dma-buf/sync_file.c linux-libre-5.10.53-gnu/drivers/dma-buf/sync_file.c
index 5a5a1da01a00..f0c822952c20 100644
--- linux-libre-5.10.52-gnu/drivers/dma-buf/sync_file.c
+++ linux-libre-5.10.53-gnu/drivers/dma-buf/sync_file.c
@@ -211,8 +211,8 @@ static struct sync_file *sync_file_merge(const char *name, struct sync_file *a,
 					 struct sync_file *b)
 {
 	struct sync_file *sync_file;
-	struct dma_fence **fences, **nfences, **a_fences, **b_fences;
-	int i, i_a, i_b, num_fences, a_num_fences, b_num_fences;
+	struct dma_fence **fences = NULL, **nfences, **a_fences, **b_fences;
+	int i = 0, i_a, i_b, num_fences, a_num_fences, b_num_fences;
 
 	sync_file = sync_file_alloc();
 	if (!sync_file)
@@ -236,7 +236,7 @@ static struct sync_file *sync_file_merge(const char *name, struct sync_file *a,
 	 * If a sync_file can only be created with sync_file_merge
 	 * and sync_file_create, this is a reasonable assumption.
 	 */
-	for (i = i_a = i_b = 0; i_a < a_num_fences && i_b < b_num_fences; ) {
+	for (i_a = i_b = 0; i_a < a_num_fences && i_b < b_num_fences; ) {
 		struct dma_fence *pt_a = a_fences[i_a];
 		struct dma_fence *pt_b = b_fences[i_b];
 
@@ -278,15 +278,16 @@ static struct sync_file *sync_file_merge(const char *name, struct sync_file *a,
 		fences = nfences;
 	}
 
-	if (sync_file_set_fence(sync_file, fences, i) < 0) {
-		kfree(fences);
+	if (sync_file_set_fence(sync_file, fences, i) < 0)
 		goto err;
-	}
 
 	strlcpy(sync_file->user_name, name, sizeof(sync_file->user_name));
 	return sync_file;
 
 err:
+	while (i)
+		dma_fence_put(fences[--i]);
+	kfree(fences);
 	fput(sync_file->file);
 	return NULL;
 
diff --git linux-libre-5.10.52-gnu/drivers/firmware/Kconfig linux-libre-5.10.53-gnu/drivers/firmware/Kconfig
index 5fa6b3ca0a38..c08968c5ddf8 100644
--- linux-libre-5.10.52-gnu/drivers/firmware/Kconfig
+++ linux-libre-5.10.53-gnu/drivers/firmware/Kconfig
@@ -9,7 +9,7 @@ menu "Firmware Drivers"
 config ARM_SCMI_PROTOCOL
 	tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
 	depends on ARM || ARM64 || COMPILE_TEST
-	depends on MAILBOX
+	depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
 	help
 	  ARM System Control and Management Interface (SCMI) protocol is a
 	  set of operating system-independent software interfaces that are
diff --git linux-libre-5.10.52-gnu/drivers/firmware/arm_scmi/common.h linux-libre-5.10.53-gnu/drivers/firmware/arm_scmi/common.h
index 65063fa948d4..34b7ae7980a3 100644
--- linux-libre-5.10.52-gnu/drivers/firmware/arm_scmi/common.h
+++ linux-libre-5.10.53-gnu/drivers/firmware/arm_scmi/common.h
@@ -243,7 +243,7 @@ struct scmi_desc {
 };
 
 extern const struct scmi_desc scmi_mailbox_desc;
-#ifdef CONFIG_HAVE_ARM_SMCCC
+#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 extern const struct scmi_desc scmi_smc_desc;
 #endif
 
diff --git linux-libre-5.10.52-gnu/drivers/firmware/arm_scmi/driver.c linux-libre-5.10.53-gnu/drivers/firmware/arm_scmi/driver.c
index f9901fadb3a4..af4560dab6b4 100644
--- linux-libre-5.10.52-gnu/drivers/firmware/arm_scmi/driver.c
+++ linux-libre-5.10.53-gnu/drivers/firmware/arm_scmi/driver.c
@@ -922,7 +922,9 @@ ATTRIBUTE_GROUPS(versions);
 
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
+#ifdef CONFIG_MAILBOX
 	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#endif
 #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
 #endif
diff --git linux-libre-5.10.52-gnu/drivers/firmware/tegra/Makefile linux-libre-5.10.53-gnu/drivers/firmware/tegra/Makefile
index 49c87e00fafb..620cf3fdd607 100644
--- linux-libre-5.10.52-gnu/drivers/firmware/tegra/Makefile
+++ linux-libre-5.10.53-gnu/drivers/firmware/tegra/Makefile
@@ -3,6 +3,7 @@ tegra-bpmp-y			= bpmp.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_210_SOC)	+= bpmp-tegra210.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_186_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_194_SOC)	+= bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_234_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_DEBUG_FS)	+= bpmp-debugfs.o
 obj-$(CONFIG_TEGRA_BPMP)	+= tegra-bpmp.o
 obj-$(CONFIG_TEGRA_IVC)		+= ivc.o
diff --git linux-libre-5.10.52-gnu/drivers/firmware/tegra/bpmp-private.h linux-libre-5.10.53-gnu/drivers/firmware/tegra/bpmp-private.h
index 54d560c48398..182bfe396516 100644
--- linux-libre-5.10.52-gnu/drivers/firmware/tegra/bpmp-private.h
+++ linux-libre-5.10.53-gnu/drivers/firmware/tegra/bpmp-private.h
@@ -24,7 +24,8 @@ struct tegra_bpmp_ops {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 extern const struct tegra_bpmp_ops tegra186_bpmp_ops;
 #endif
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
diff --git linux-libre-5.10.52-gnu/drivers/firmware/tegra/bpmp.c linux-libre-5.10.53-gnu/drivers/firmware/tegra/bpmp.c
index 0742a90cb844..5654c5e9862b 100644
--- linux-libre-5.10.52-gnu/drivers/firmware/tegra/bpmp.c
+++ linux-libre-5.10.53-gnu/drivers/firmware/tegra/bpmp.c
@@ -809,7 +809,8 @@ static const struct dev_pm_ops tegra_bpmp_pm_ops = {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 static const struct tegra_bpmp_soc tegra186_soc = {
 	.channels = {
 		.cpu_tx = {
diff --git linux-libre-5.10.52-gnu/drivers/firmware/turris-mox-rwtm.c linux-libre-5.10.53-gnu/drivers/firmware/turris-mox-rwtm.c
index 03f1eac9ad69..0bef988580ad 100644
--- linux-libre-5.10.52-gnu/drivers/firmware/turris-mox-rwtm.c
+++ linux-libre-5.10.53-gnu/drivers/firmware/turris-mox-rwtm.c
@@ -569,6 +569,7 @@ static int turris_mox_rwtm_remove(struct platform_device *pdev)
 
 static const struct of_device_id turris_mox_rwtm_match[] = {
 	{ .compatible = "cznic,turris-mox-rwtm", },
+	{ .compatible = "marvell,armada-3700-rwtm-firmware", },
 	{ },
 };
 
diff --git linux-libre-5.10.52-gnu/drivers/gpu/drm/panel/panel-novatek-nt35510.c linux-libre-5.10.53-gnu/drivers/gpu/drm/panel/panel-novatek-nt35510.c
index ef70140c5b09..873cbd38e6d3 100644
--- linux-libre-5.10.52-gnu/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ linux-libre-5.10.53-gnu/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -706,9 +706,7 @@ static int nt35510_power_on(struct nt35510 *nt)
 	if (ret)
 		return ret;
 
-	ret = nt35510_read_id(nt);
-	if (ret)
-		return ret;
+	nt35510_read_id(nt);
 
 	/* Set up stuff in  manufacturer control, page 1 */
 	ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR,
diff --git linux-libre-5.10.52-gnu/drivers/memory/tegra/tegra124-emc.c linux-libre-5.10.53-gnu/drivers/memory/tegra/tegra124-emc.c
index 76ace42a688a..dae816e840a9 100644
--- linux-libre-5.10.52-gnu/drivers/memory/tegra/tegra124-emc.c
+++ linux-libre-5.10.53-gnu/drivers/memory/tegra/tegra124-emc.c
@@ -265,8 +265,8 @@
 #define EMC_PUTERM_ADJ				0x574
 
 #define DRAM_DEV_SEL_ALL			0
-#define DRAM_DEV_SEL_0				(2 << 30)
-#define DRAM_DEV_SEL_1				(1 << 30)
+#define DRAM_DEV_SEL_0				BIT(31)
+#define DRAM_DEV_SEL_1				BIT(30)
 
 #define EMC_CFG_POWER_FEATURES_MASK		\
 	(EMC_CFG_DYN_SREF | EMC_CFG_DRAM_ACPD | EMC_CFG_DRAM_CLKSTOP_SR | \
diff --git linux-libre-5.10.52-gnu/drivers/memory/tegra/tegra30-emc.c linux-libre-5.10.53-gnu/drivers/memory/tegra/tegra30-emc.c
index 055af0e08a2e..1bd6d3d827aa 100644
--- linux-libre-5.10.52-gnu/drivers/memory/tegra/tegra30-emc.c
+++ linux-libre-5.10.53-gnu/drivers/memory/tegra/tegra30-emc.c
@@ -145,8 +145,8 @@
 #define EMC_SELF_REF_CMD_ENABLED		BIT(0)
 
 #define DRAM_DEV_SEL_ALL			(0 << 30)
-#define DRAM_DEV_SEL_0				(2 << 30)
-#define DRAM_DEV_SEL_1				(1 << 30)
+#define DRAM_DEV_SEL_0				BIT(31)
+#define DRAM_DEV_SEL_1				BIT(30)
 #define DRAM_BROADCAST(num) \
 	((num) > 1 ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0)
 
diff --git linux-libre-5.10.52-gnu/drivers/net/dsa/mv88e6xxx/chip.c linux-libre-5.10.53-gnu/drivers/net/dsa/mv88e6xxx/chip.c
index 70ec17f3c300..429ce8638c2b 100644
--- linux-libre-5.10.52-gnu/drivers/net/dsa/mv88e6xxx/chip.c
+++ linux-libre-5.10.53-gnu/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3407,7 +3407,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
 	.port_set_cmode = mv88e6341_port_set_cmode,
 	.port_setup_message_port = mv88e6xxx_setup_message_port,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
-	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,
 	.stats_get_strings = mv88e6320_stats_get_strings,
 	.stats_get_stats = mv88e6390_stats_get_stats,
@@ -3417,6 +3417,9 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
 	.mgmt_rsvd2cpu =  mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
+	.rmu_disable = mv88e6390_g1_rmu_disable,
+	.atu_get_hash = mv88e6165_g1_atu_get_hash,
+	.atu_set_hash = mv88e6165_g1_atu_set_hash,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
 	.serdes_power = mv88e6390_serdes_power,
@@ -3613,6 +3616,7 @@ static const struct mv88e6xxx_ops mv88e6175_ops = {
 	.port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
 	.port_set_speed_duplex = mv88e6185_port_set_speed_duplex,
 	.port_tag_remap = mv88e6095_port_tag_remap,
+	.port_set_policy = mv88e6352_port_set_policy,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
 	.port_set_ether_type = mv88e6351_port_set_ether_type,
@@ -4173,7 +4177,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
 	.port_set_cmode = mv88e6341_port_set_cmode,
 	.port_setup_message_port = mv88e6xxx_setup_message_port,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
-	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,
 	.stats_get_strings = mv88e6320_stats_get_strings,
 	.stats_get_stats = mv88e6390_stats_get_stats,
@@ -4183,6 +4187,9 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
 	.mgmt_rsvd2cpu =  mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
+	.rmu_disable = mv88e6390_g1_rmu_disable,
+	.atu_get_hash = mv88e6165_g1_atu_get_hash,
+	.atu_set_hash = mv88e6165_g1_atu_set_hash,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
 	.serdes_power = mv88e6390_serdes_power,
@@ -4253,6 +4260,7 @@ static const struct mv88e6xxx_ops mv88e6351_ops = {
 	.port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
 	.port_set_speed_duplex = mv88e6185_port_set_speed_duplex,
 	.port_tag_remap = mv88e6095_port_tag_remap,
+	.port_set_policy = mv88e6352_port_set_policy,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
 	.port_set_ether_type = mv88e6351_port_set_ether_type,
diff --git linux-libre-5.10.52-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet.c linux-libre-5.10.53-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 41f7f078cd27..db74241935ab 100644
--- linux-libre-5.10.52-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ linux-libre-5.10.53-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1640,7 +1640,8 @@ static void bcmgenet_power_up(struct bcmgenet_priv *priv,
 
 	switch (mode) {
 	case GENET_POWER_PASSIVE:
-		reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS);
+		reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS |
+			 EXT_ENERGY_DET_MASK);
 		if (GENET_IS_V5(priv)) {
 			reg &= ~(EXT_PWR_DOWN_PHY_EN |
 				 EXT_PWR_DOWN_PHY_RD |
@@ -3237,15 +3238,21 @@ static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv,
 /* Returns a reusable dma control register value */
 static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
 {
+	unsigned int i;
 	u32 reg;
 	u32 dma_ctrl;
 
 	/* disable DMA */
 	dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+	for (i = 0; i < priv->hw_params->tx_queues; i++)
+		dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
 	reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
 	reg &= ~dma_ctrl;
 	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
 
+	dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+	for (i = 0; i < priv->hw_params->rx_queues; i++)
+		dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
 	reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
 	reg &= ~dma_ctrl;
 	bcmgenet_rdma_writel(priv, reg, DMA_CTRL);
@@ -3292,7 +3299,6 @@ static int bcmgenet_open(struct net_device *dev)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	unsigned long dma_ctrl;
-	u32 reg;
 	int ret;
 
 	netif_dbg(priv, ifup, dev, "bcmgenet_open\n");
@@ -3318,12 +3324,6 @@ static int bcmgenet_open(struct net_device *dev)
 
 	bcmgenet_set_hw_addr(priv, dev->dev_addr);
 
-	if (priv->internal_phy) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg |= EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	/* Disable RX/TX DMA and flush TX queues */
 	dma_ctrl = bcmgenet_dma_disable(priv);
 
@@ -4139,7 +4139,6 @@ static int bcmgenet_resume(struct device *d)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct bcmgenet_rxnfc_rule *rule;
 	unsigned long dma_ctrl;
-	u32 reg;
 	int ret;
 
 	if (!netif_running(dev))
@@ -4176,12 +4175,6 @@ static int bcmgenet_resume(struct device *d)
 		if (rule->state != BCMGENET_RXNFC_STATE_UNUSED)
 			bcmgenet_hfb_create_rxnfc_filter(priv, rule);
 
-	if (priv->internal_phy) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg |= EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	/* Disable RX/TX DMA and flush TX queues */
 	dma_ctrl = bcmgenet_dma_disable(priv);
 
diff --git linux-libre-5.10.52-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c linux-libre-5.10.53-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index 1c86eddb1b51..e84ad587fb21 100644
--- linux-libre-5.10.52-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ linux-libre-5.10.53-gnu/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -187,12 +187,6 @@ int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv,
 	reg |= CMD_RX_EN;
 	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
 
-	if (priv->hw_params->flags & GENET_HAS_EXT) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg &= ~EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	reg = UMAC_IRQ_MPD_R;
 	if (hfb_enable)
 		reg |=  UMAC_IRQ_HFB_SM | UMAC_IRQ_HFB_MM;
diff --git linux-libre-5.10.52-gnu/drivers/net/ethernet/moxa/moxart_ether.c linux-libre-5.10.53-gnu/drivers/net/ethernet/moxa/moxart_ether.c
index a4380c45f668..a0e1ccca505b 100644
--- linux-libre-5.10.52-gnu/drivers/net/ethernet/moxa/moxart_ether.c
+++ linux-libre-5.10.53-gnu/drivers/net/ethernet/moxa/moxart_ether.c
@@ -541,10 +541,8 @@ static int moxart_mac_probe(struct platform_device *pdev)
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 
 	ret = register_netdev(ndev);
-	if (ret) {
-		free_netdev(ndev);
+	if (ret)
 		goto init_fail;
-	}
 
 	netdev_dbg(ndev, "%s: IRQ=%d address=%pM\n",
 		   __func__, ndev->irq, ndev->dev_addr);
diff --git linux-libre-5.10.52-gnu/drivers/net/ethernet/qualcomm/emac/emac.c linux-libre-5.10.53-gnu/drivers/net/ethernet/qualcomm/emac/emac.c
index 8543bf3c3484..ad655f0a4965 100644
--- linux-libre-5.10.52-gnu/drivers/net/ethernet/qualcomm/emac/emac.c
+++ linux-libre-5.10.53-gnu/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -735,12 +735,13 @@ static int emac_remove(struct platform_device *pdev)
 
 	put_device(&adpt->phydev->mdio.dev);
 	mdiobus_unregister(adpt->mii_bus);
-	free_netdev(netdev);
 
 	if (adpt->phy.digital)
 		iounmap(adpt->phy.digital);
 	iounmap(adpt->phy.base);
 
+	free_netdev(netdev);
+
 	return 0;
 }
 
diff --git linux-libre-5.10.52-gnu/drivers/net/ethernet/ti/tlan.c linux-libre-5.10.53-gnu/drivers/net/ethernet/ti/tlan.c
index 267c080ee084..0072ffa6e19e 100644
--- linux-libre-5.10.52-gnu/drivers/net/ethernet/ti/tlan.c
+++ linux-libre-5.10.53-gnu/drivers/net/ethernet/ti/tlan.c
@@ -313,9 +313,8 @@ static void tlan_remove_one(struct pci_dev *pdev)
 	pci_release_regions(pdev);
 #endif
 
-	free_netdev(dev);
-
 	cancel_work_sync(&priv->tlan_tqueue);
+	free_netdev(dev);
 }
 
 static void tlan_start(struct net_device *dev)
diff --git linux-libre-5.10.52-gnu/drivers/net/fddi/defza.c linux-libre-5.10.53-gnu/drivers/net/fddi/defza.c
index eaf85db53a5e..2e7d6cc16b2d 100644
--- linux-libre-5.10.52-gnu/drivers/net/fddi/defza.c
+++ linux-libre-5.10.53-gnu/drivers/net/fddi/defza.c
@@ -1504,9 +1504,8 @@ err_out_resource:
 	release_mem_region(start, len);
 
 err_out_kfree:
-	free_netdev(dev);
-
 	pr_err("%s: initialization failure, aborting!\n", fp->name);
+	free_netdev(dev);
 	return ret;
 }
 
diff --git linux-libre-5.10.52-gnu/drivers/net/netdevsim/ipsec.c linux-libre-5.10.53-gnu/drivers/net/netdevsim/ipsec.c
index 3811f1bde84e..b80ed2ffd45e 100644
--- linux-libre-5.10.52-gnu/drivers/net/netdevsim/ipsec.c
+++ linux-libre-5.10.53-gnu/drivers/net/netdevsim/ipsec.c
@@ -85,7 +85,7 @@ static int nsim_ipsec_parse_proto_keys(struct xfrm_state *xs,
 				       u32 *mykey, u32 *mysalt)
 {
 	const char aes_gcm_name[] = "rfc4106(gcm(aes))";
-	struct net_device *dev = xs->xso.dev;
+	struct net_device *dev = xs->xso.real_dev;
 	unsigned char *key_data;
 	char *alg_name = NULL;
 	int key_len;
@@ -134,7 +134,7 @@ static int nsim_ipsec_add_sa(struct xfrm_state *xs)
 	u16 sa_idx;
 	int ret;
 
-	dev = xs->xso.dev;
+	dev = xs->xso.real_dev;
 	ns = netdev_priv(dev);
 	ipsec = &ns->ipsec;
 
@@ -194,7 +194,7 @@ static int nsim_ipsec_add_sa(struct xfrm_state *xs)
 
 static void nsim_ipsec_del_sa(struct xfrm_state *xs)
 {
-	struct netdevsim *ns = netdev_priv(xs->xso.dev);
+	struct netdevsim *ns = netdev_priv(xs->xso.real_dev);
 	struct nsim_ipsec *ipsec = &ns->ipsec;
 	u16 sa_idx;
 
@@ -211,7 +211,7 @@ static void nsim_ipsec_del_sa(struct xfrm_state *xs)
 
 static bool nsim_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs)
 {
-	struct netdevsim *ns = netdev_priv(xs->xso.dev);
+	struct netdevsim *ns = netdev_priv(xs->xso.real_dev);
 	struct nsim_ipsec *ipsec = &ns->ipsec;
 
 	ipsec->ok++;
diff --git linux-libre-5.10.52-gnu/drivers/net/vmxnet3/vmxnet3_ethtool.c linux-libre-5.10.53-gnu/drivers/net/vmxnet3/vmxnet3_ethtool.c
index 7ec8652f2c26..66590e95c292 100644
--- linux-libre-5.10.52-gnu/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ linux-libre-5.10.53-gnu/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -1,7 +1,7 @@
 /*
  * Linux driver for VMware's vmxnet3 ethernet NIC.
  *
- * Copyright (C) 2008-2020, VMware, Inc. All Rights Reserved.
+ * Copyright (C) 2008-2021, VMware, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -26,6 +26,10 @@
 
 
 #include "vmxnet3_int.h"
+#include <net/vxlan.h>
+#include <net/geneve.h>
+
+#define VXLAN_UDP_PORT 8472
 
 struct vmxnet3_stat_desc {
 	char desc[ETH_GSTRING_LEN];
@@ -277,6 +281,8 @@ netdev_features_t vmxnet3_features_check(struct sk_buff *skb,
 	if (VMXNET3_VERSION_GE_4(adapter) &&
 	    skb->encapsulation && skb->ip_summed == CHECKSUM_PARTIAL) {
 		u8 l4_proto = 0;
+		u16 port;
+		struct udphdr *udph;
 
 		switch (vlan_get_protocol(skb)) {
 		case htons(ETH_P_IP):
@@ -289,8 +295,20 @@ netdev_features_t vmxnet3_features_check(struct sk_buff *skb,
 			return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
 		}
 
-		if (l4_proto != IPPROTO_UDP)
+		switch (l4_proto) {
+		case IPPROTO_UDP:
+			udph = udp_hdr(skb);
+			port = be16_to_cpu(udph->dest);
+			/* Check if offloaded port is supported */
+			if (port != GENEVE_UDP_PORT &&
+			    port != IANA_VXLAN_UDP_PORT &&
+			    port != VXLAN_UDP_PORT) {
+				return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
+			}
+			break;
+		default:
 			return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
+		}
 	}
 	return features;
 }
diff --git linux-libre-5.10.52-gnu/drivers/reset/reset-ti-syscon.c linux-libre-5.10.53-gnu/drivers/reset/reset-ti-syscon.c
index ef97c4dbbb4e..742056a2a756 100644
--- linux-libre-5.10.52-gnu/drivers/reset/reset-ti-syscon.c
+++ linux-libre-5.10.53-gnu/drivers/reset/reset-ti-syscon.c
@@ -58,8 +58,8 @@ struct ti_syscon_reset_data {
 	unsigned int nr_controls;
 };
 
-#define to_ti_syscon_reset_data(rcdev)	\
-	container_of(rcdev, struct ti_syscon_reset_data, rcdev)
+#define to_ti_syscon_reset_data(_rcdev)	\
+	container_of(_rcdev, struct ti_syscon_reset_data, rcdev)
 
 /**
  * ti_syscon_reset_assert() - assert device reset
diff --git linux-libre-5.10.52-gnu/drivers/rtc/rtc-max77686.c linux-libre-5.10.53-gnu/drivers/rtc/rtc-max77686.c
index d51cc12114cb..eae7cb9faf1e 100644
--- linux-libre-5.10.52-gnu/drivers/rtc/rtc-max77686.c
+++ linux-libre-5.10.53-gnu/drivers/rtc/rtc-max77686.c
@@ -717,8 +717,8 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
 
 add_rtc_irq:
 	ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
-				  IRQF_SHARED, 0, info->drv_data->rtc_irq_chip,
+				  IRQF_ONESHOT | IRQF_SHARED,
+				  0, info->drv_data->rtc_irq_chip,
 				  &info->rtc_irq_data);
 	if (ret < 0) {
 		dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
diff --git linux-libre-5.10.52-gnu/drivers/rtc/rtc-mxc_v2.c linux-libre-5.10.53-gnu/drivers/rtc/rtc-mxc_v2.c
index 91534560fe2a..d349cef09cb7 100644
--- linux-libre-5.10.52-gnu/drivers/rtc/rtc-mxc_v2.c
+++ linux-libre-5.10.53-gnu/drivers/rtc/rtc-mxc_v2.c
@@ -373,6 +373,7 @@ static const struct of_device_id mxc_ids[] = {
 	{ .compatible = "fsl,imx53-rtc", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mxc_ids);
 
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
diff --git linux-libre-5.10.52-gnu/drivers/scsi/aic7xxx/aic7xxx_core.c linux-libre-5.10.53-gnu/drivers/scsi/aic7xxx/aic7xxx_core.c
index 725bb7f58054..12fed15dec66 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -493,7 +493,7 @@ ahc_inq(struct ahc_softc *ahc, u_int port)
 	return ((ahc_inb(ahc, port))
 	      | (ahc_inb(ahc, port+1) << 8)
 	      | (ahc_inb(ahc, port+2) << 16)
-	      | (ahc_inb(ahc, port+3) << 24)
+	      | (((uint64_t)ahc_inb(ahc, port+3)) << 24)
 	      | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
 	      | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
 	      | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
diff --git linux-libre-5.10.52-gnu/drivers/scsi/aic94xx/aic94xx_init.c linux-libre-5.10.53-gnu/drivers/scsi/aic94xx/aic94xx_init.c
index a195bfe9eccc..7a78606598c4 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/aic94xx/aic94xx_init.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/aic94xx/aic94xx_init.c
@@ -53,6 +53,7 @@ static struct scsi_host_template aic94xx_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler	= sas_eh_device_reset_handler,
 	.eh_target_reset_handler	= sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git linux-libre-5.10.52-gnu/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c linux-libre-5.10.53-gnu/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 2e529d67de73..2c1028183b24 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1769,6 +1769,7 @@ static struct scsi_host_template sht_v1_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git linux-libre-5.10.52-gnu/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c linux-libre-5.10.53-gnu/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 6ef8730c61a6..b75d54339e40 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3545,6 +3545,7 @@ static struct scsi_host_template sht_v2_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git linux-libre-5.10.52-gnu/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c linux-libre-5.10.53-gnu/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index e9a82a390672..50a1c3478a6e 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3126,6 +3126,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git linux-libre-5.10.52-gnu/drivers/scsi/isci/init.c linux-libre-5.10.53-gnu/drivers/scsi/isci/init.c
index 93bc9019667f..9d7cc62ace2e 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/isci/init.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/isci/init.c
@@ -167,6 +167,7 @@ static struct scsi_host_template isci_sht = {
 	.eh_abort_handler		= sas_eh_abort_handler,
 	.eh_device_reset_handler        = sas_eh_device_reset_handler,
 	.eh_target_reset_handler        = sas_eh_target_reset_handler,
+	.slave_alloc			= sas_slave_alloc,
 	.target_destroy			= sas_target_destroy,
 	.ioctl				= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git linux-libre-5.10.52-gnu/drivers/scsi/libfc/fc_rport.c linux-libre-5.10.53-gnu/drivers/scsi/libfc/fc_rport.c
index a60b228d13f1..f40edb0dab70 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/libfc/fc_rport.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/libfc/fc_rport.c
@@ -1162,6 +1162,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
 		FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x spp_type 0x%x\n",
 			     pp->spp.spp_flags, pp->spp.spp_type);
+
 		rdata->spp_type = pp->spp.spp_type;
 		if (resp_code != FC_SPP_RESP_ACK) {
 			if (resp_code == FC_SPP_RESP_CONF)
@@ -1184,11 +1185,13 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		/*
 		 * Call prli provider if we should act as a target
 		 */
-		prov = fc_passive_prov[rdata->spp_type];
-		if (prov) {
-			memset(&temp_spp, 0, sizeof(temp_spp));
-			prov->prli(rdata, pp->prli.prli_spp_len,
-				   &pp->spp, &temp_spp);
+		if (rdata->spp_type < FC_FC4_PROV_SIZE) {
+			prov = fc_passive_prov[rdata->spp_type];
+			if (prov) {
+				memset(&temp_spp, 0, sizeof(temp_spp));
+				prov->prli(rdata, pp->prli.prli_spp_len,
+					   &pp->spp, &temp_spp);
+			}
 		}
 		/*
 		 * Check if the image pair could be established
diff --git linux-libre-5.10.52-gnu/drivers/scsi/libsas/sas_scsi_host.c linux-libre-5.10.53-gnu/drivers/scsi/libsas/sas_scsi_host.c
index 1bf939818c98..ee44a0d7730b 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/libsas/sas_scsi_host.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/libsas/sas_scsi_host.c
@@ -911,6 +911,14 @@ void sas_task_abort(struct sas_task *task)
 		blk_abort_request(sc->request);
 }
 
+int sas_slave_alloc(struct scsi_device *sdev)
+{
+	if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
+		return -ENXIO;
+
+	return 0;
+}
+
 void sas_target_destroy(struct scsi_target *starget)
 {
 	struct domain_device *found_dev = starget->hostdata;
@@ -957,5 +965,6 @@ EXPORT_SYMBOL_GPL(sas_task_abort);
 EXPORT_SYMBOL_GPL(sas_phy_reset);
 EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
 EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
 EXPORT_SYMBOL_GPL(sas_target_destroy);
 EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git linux-libre-5.10.52-gnu/drivers/scsi/mvsas/mv_init.c linux-libre-5.10.53-gnu/drivers/scsi/mvsas/mv_init.c
index 6aa2697c4a15..b03c0f35d7b0 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/mvsas/mv_init.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/mvsas/mv_init.c
@@ -46,6 +46,7 @@ static struct scsi_host_template mvs_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git linux-libre-5.10.52-gnu/drivers/scsi/pm8001/pm8001_init.c linux-libre-5.10.53-gnu/drivers/scsi/pm8001/pm8001_init.c
index 0c0c886c7371..13b8ddec6189 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/pm8001/pm8001_init.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/pm8001/pm8001_init.c
@@ -101,6 +101,7 @@ static struct scsi_host_template pm8001_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git linux-libre-5.10.52-gnu/drivers/scsi/qedf/qedf_io.c linux-libre-5.10.53-gnu/drivers/scsi/qedf/qedf_io.c
index 4869ef813dc4..63f99f4eeed9 100644
--- linux-libre-5.10.52-gnu/drivers/scsi/qedf/qedf_io.c
+++ linux-libre-5.10.53-gnu/drivers/scsi/qedf/qedf_io.c
@@ -1520,9 +1520,19 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 {
 	int rval;
 
+	if (io_req == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "io_req is NULL.\n");
+		return;
+	}
+
+	if (io_req->fcport == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "fcport is NULL.\n");
+		return;
+	}
+
 	if (!cqe) {
 		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
-			  "cqe is NULL for io_req %p\n", io_req);
+			"cqe is NULL for io_req %p\n", io_req);
 		return;
 	}
 
@@ -1538,6 +1548,16 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_buf_off),
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_id));
 
+	/* When flush is active, let the cmds be flushed out from the cleanup context */
+	if (test_bit(QEDF_RPORT_IN_TARGET_RESET, &io_req->fcport->flags) ||
+		(test_bit(QEDF_RPORT_IN_LUN_RESET, &io_req->fcport->flags) &&
+		 io_req->sc_cmd->device->lun == (u64)io_req->fcport->lun_reset_lun)) {
+		QEDF_ERR(&qedf->dbg_ctx,
+			"Dropping EQE for xid=0x%x as fcport is flushing",
+			io_req->xid);
+		return;
+	}
+
 	if (qedf->stop_io_on_error) {
 		qedf_stop_all_io(qedf);
 		return;
diff --git linux-libre-5.10.52-gnu/drivers/soc/tegra/fuse/fuse-tegra30.c linux-libre-5.10.53-gnu/drivers/soc/tegra/fuse/fuse-tegra30.c
index 9ea7f0168457..c1aa7815bd6e 100644
--- linux-libre-5.10.52-gnu/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ linux-libre-5.10.53-gnu/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -37,7 +37,8 @@
     defined(CONFIG_ARCH_TEGRA_132_SOC) || \
     defined(CONFIG_ARCH_TEGRA_210_SOC) || \
     defined(CONFIG_ARCH_TEGRA_186_SOC) || \
-    defined(CONFIG_ARCH_TEGRA_194_SOC)
+    defined(CONFIG_ARCH_TEGRA_194_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_234_SOC)
 static u32 tegra30_fuse_read_early(struct tegra_fuse *fuse, unsigned int offset)
 {
 	if (WARN_ON(!fuse->base))
diff --git linux-libre-5.10.52-gnu/drivers/thermal/imx_sc_thermal.c linux-libre-5.10.53-gnu/drivers/thermal/imx_sc_thermal.c
index b01d28eca7ee..8d76dbfde6a9 100644
--- linux-libre-5.10.52-gnu/drivers/thermal/imx_sc_thermal.c
+++ linux-libre-5.10.53-gnu/drivers/thermal/imx_sc_thermal.c
@@ -93,6 +93,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 	for_each_available_child_of_node(np, child) {
 		sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
 		if (!sensor) {
+			of_node_put(child);
 			of_node_put(sensor_np);
 			return -ENOMEM;
 		}
@@ -104,6 +105,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"failed to get valid sensor resource id: %d\n",
 				ret);
+			of_node_put(child);
 			break;
 		}
 
@@ -114,6 +116,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 		if (IS_ERR(sensor->tzd)) {
 			dev_err(&pdev->dev, "failed to register thermal zone\n");
 			ret = PTR_ERR(sensor->tzd);
+			of_node_put(child);
 			break;
 		}
 
diff --git linux-libre-5.10.52-gnu/drivers/thermal/rcar_gen3_thermal.c linux-libre-5.10.53-gnu/drivers/thermal/rcar_gen3_thermal.c
index 8d724d92d57f..c4f28752d148 100644
--- linux-libre-5.10.52-gnu/drivers/thermal/rcar_gen3_thermal.c
+++ linux-libre-5.10.53-gnu/drivers/thermal/rcar_gen3_thermal.c
@@ -366,7 +366,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 {
 	struct rcar_gen3_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
-	const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
+	const int *ths_tj_1 = of_device_get_match_data(dev);
 	struct resource *res;
 	struct thermal_zone_device *zone;
 	int ret, irq, i;
@@ -434,8 +434,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		priv->tscs[i] = tsc;
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i],
-					     *rcar_gen3_ths_tj_1);
+		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1);
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
 							    &rcar_gen3_tz_of_ops);
diff --git linux-libre-5.10.52-gnu/drivers/thermal/sprd_thermal.c linux-libre-5.10.53-gnu/drivers/thermal/sprd_thermal.c
index fe06cccf14b3..fff80fc18002 100644
--- linux-libre-5.10.52-gnu/drivers/thermal/sprd_thermal.c
+++ linux-libre-5.10.53-gnu/drivers/thermal/sprd_thermal.c
@@ -388,7 +388,7 @@ static int sprd_thm_probe(struct platform_device *pdev)
 		sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
 		if (!sen) {
 			ret = -ENOMEM;
-			goto disable_clk;
+			goto of_put;
 		}
 
 		sen->data = thm;
@@ -397,13 +397,13 @@ static int sprd_thm_probe(struct platform_device *pdev)
 		ret = of_property_read_u32(sen_child, "reg", &sen->id);
 		if (ret) {
 			dev_err(&pdev->dev, "get sensor reg failed");
-			goto disable_clk;
+			goto of_put;
 		}
 
 		ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
 		if (ret) {
 			dev_err(&pdev->dev, "efuse cal analysis failed");
-			goto disable_clk;
+			goto of_put;
 		}
 
 		sprd_thm_sensor_init(thm, sen);
@@ -416,19 +416,20 @@ static int sprd_thm_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "register thermal zone failed %d\n",
 				sen->id);
 			ret = PTR_ERR(sen->tzd);
-			goto disable_clk;
+			goto of_put;
 		}
 
 		thm->sensor[sen->id] = sen;
 	}
+	/* sen_child set to NULL at this point */
 
 	ret = sprd_thm_set_ready(thm);
 	if (ret)
-		goto disable_clk;
+		goto of_put;
 
 	ret = sprd_thm_wait_temp_ready(thm);
 	if (ret)
-		goto disable_clk;
+		goto of_put;
 
 	for (i = 0; i < thm->nr_sensors; i++)
 		sprd_thm_toggle_sensor(thm->sensor[i], true);
@@ -436,6 +437,8 @@ static int sprd_thm_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, thm);
 	return 0;
 
+of_put:
+	of_node_put(sen_child);
 disable_clk:
 	clk_disable_unprepare(thm->clk);
 	return ret;
diff --git linux-libre-5.10.52-gnu/drivers/thermal/thermal_core.c linux-libre-5.10.53-gnu/drivers/thermal/thermal_core.c
index c6d74bc1c90b..e669f83faa3c 100644
--- linux-libre-5.10.52-gnu/drivers/thermal/thermal_core.c
+++ linux-libre-5.10.53-gnu/drivers/thermal/thermal_core.c
@@ -1509,7 +1509,7 @@ free_tz:
 EXPORT_SYMBOL_GPL(thermal_zone_device_register);
 
 /**
- * thermal_device_unregister - removes the registered thermal zone device
+ * thermal_zone_device_unregister - removes the registered thermal zone device
  * @tz: the thermal zone device to remove
  */
 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
diff --git linux-libre-5.10.52-gnu/drivers/thermal/thermal_of.c linux-libre-5.10.53-gnu/drivers/thermal/thermal_of.c
index 5b76f9a1280d..6379f26a335f 100644
--- linux-libre-5.10.52-gnu/drivers/thermal/thermal_of.c
+++ linux-libre-5.10.53-gnu/drivers/thermal/thermal_of.c
@@ -559,6 +559,9 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
 	if (!tz)
 		return;
 
+	/* stop temperature polling */
+	thermal_zone_device_disable(tzd);
+
 	mutex_lock(&tzd->lock);
 	tzd->ops->get_temp = NULL;
 	tzd->ops->get_trend = NULL;
diff --git linux-libre-5.10.52-gnu/drivers/usb/cdns3/gadget.c linux-libre-5.10.53-gnu/drivers/usb/cdns3/gadget.c
index c24c0e3440e3..9d38f864cb68 100644
--- linux-libre-5.10.52-gnu/drivers/usb/cdns3/gadget.c
+++ linux-libre-5.10.53-gnu/drivers/usb/cdns3/gadget.c
@@ -2006,7 +2006,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
 		else
 			mask = BIT(priv_ep->num);
 
-		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
 			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
 			cdns3_set_register_bit(&regs->tdl_beh, mask);
 			cdns3_set_register_bit(&regs->tdl_beh2, mask);
@@ -2045,15 +2045,13 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
 	case USB_ENDPOINT_XFER_INT:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2  && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	default:
diff --git linux-libre-5.10.52-gnu/fs/cifs/cifs_dfs_ref.c linux-libre-5.10.53-gnu/fs/cifs/cifs_dfs_ref.c
index cc3ada12848d..42125601ebb1 100644
--- linux-libre-5.10.52-gnu/fs/cifs/cifs_dfs_ref.c
+++ linux-libre-5.10.53-gnu/fs/cifs/cifs_dfs_ref.c
@@ -151,6 +151,9 @@ char *cifs_compose_mount_options(const char *sb_mountdata,
 		return ERR_PTR(-EINVAL);
 
 	if (ref) {
+		if (WARN_ON_ONCE(!ref->node_name || ref->path_consumed < 0))
+			return ERR_PTR(-EINVAL);
+
 		if (strlen(fullpath) - ref->path_consumed) {
 			prepath = fullpath + ref->path_consumed;
 			/* skip initial delimiter */
diff --git linux-libre-5.10.52-gnu/fs/f2fs/sysfs.c linux-libre-5.10.53-gnu/fs/f2fs/sysfs.c
index ec77ccfea923..b8850c81068a 100644
--- linux-libre-5.10.52-gnu/fs/f2fs/sysfs.c
+++ linux-libre-5.10.53-gnu/fs/f2fs/sysfs.c
@@ -612,7 +612,9 @@ F2FS_FEATURE_RO_ATTR(lost_found, FEAT_LOST_FOUND);
 F2FS_FEATURE_RO_ATTR(verity, FEAT_VERITY);
 #endif
 F2FS_FEATURE_RO_ATTR(sb_checksum, FEAT_SB_CHECKSUM);
+#ifdef CONFIG_UNICODE
 F2FS_FEATURE_RO_ATTR(casefold, FEAT_CASEFOLD);
+#endif
 #ifdef CONFIG_F2FS_FS_COMPRESSION
 F2FS_FEATURE_RO_ATTR(compression, FEAT_COMPRESSION);
 #endif
@@ -700,7 +702,9 @@ static struct attribute *f2fs_feat_attrs[] = {
 	ATTR_LIST(verity),
 #endif
 	ATTR_LIST(sb_checksum),
+#ifdef CONFIG_UNICODE
 	ATTR_LIST(casefold),
+#endif
 #ifdef CONFIG_F2FS_FS_COMPRESSION
 	ATTR_LIST(compression),
 #endif
diff --git linux-libre-5.10.52-gnu/include/linux/bpf.h linux-libre-5.10.53-gnu/include/linux/bpf.h
index 8ad819132dde..c3ccb242d199 100644
--- linux-libre-5.10.52-gnu/include/linux/bpf.h
+++ linux-libre-5.10.53-gnu/include/linux/bpf.h
@@ -752,6 +752,7 @@ struct bpf_jit_poke_descriptor {
 	void *tailcall_target;
 	void *tailcall_bypass;
 	void *bypass_addr;
+	void *aux;
 	union {
 		struct {
 			struct bpf_map *map;
diff --git linux-libre-5.10.52-gnu/include/linux/huge_mm.h linux-libre-5.10.53-gnu/include/linux/huge_mm.h
index e72787731a5b..176457145bcf 100644
--- linux-libre-5.10.52-gnu/include/linux/huge_mm.h
+++ linux-libre-5.10.53-gnu/include/linux/huge_mm.h
@@ -10,7 +10,7 @@
 vm_fault_t do_huge_pmd_anonymous_page(struct vm_fault *vmf);
 int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		  pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr,
-		  struct vm_area_struct *vma);
+		  struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma);
 void huge_pmd_set_accessed(struct vm_fault *vmf, pmd_t orig_pmd);
 int copy_huge_pud(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		  pud_t *dst_pud, pud_t *src_pud, unsigned long addr,
diff --git linux-libre-5.10.52-gnu/include/linux/swap.h linux-libre-5.10.53-gnu/include/linux/swap.h
index dfabf4660a67..fbc6805358da 100644
--- linux-libre-5.10.52-gnu/include/linux/swap.h
+++ linux-libre-5.10.53-gnu/include/linux/swap.h
@@ -503,15 +503,6 @@ static inline struct swap_info_struct *swp_swap_info(swp_entry_t entry)
 	return NULL;
 }
 
-static inline struct swap_info_struct *get_swap_device(swp_entry_t entry)
-{
-	return NULL;
-}
-
-static inline void put_swap_device(struct swap_info_struct *si)
-{
-}
-
 #define swap_address_space(entry)		(NULL)
 #define get_nr_swap_pages()			0L
 #define total_swap_pages			0L
diff --git linux-libre-5.10.52-gnu/include/linux/swapops.h linux-libre-5.10.53-gnu/include/linux/swapops.h
index 6430a94c6981..0d429a102d41 100644
--- linux-libre-5.10.52-gnu/include/linux/swapops.h
+++ linux-libre-5.10.53-gnu/include/linux/swapops.h
@@ -265,6 +265,8 @@ static inline swp_entry_t pmd_to_swp_entry(pmd_t pmd)
 
 	if (pmd_swp_soft_dirty(pmd))
 		pmd = pmd_swp_clear_soft_dirty(pmd);
+	if (pmd_swp_uffd_wp(pmd))
+		pmd = pmd_swp_clear_uffd_wp(pmd);
 	arch_entry = __pmd_to_swp_entry(pmd);
 	return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
 }
diff --git linux-libre-5.10.52-gnu/include/net/dst_metadata.h linux-libre-5.10.53-gnu/include/net/dst_metadata.h
index 56cb3c38569a..14efa0ded75d 100644
--- linux-libre-5.10.52-gnu/include/net/dst_metadata.h
+++ linux-libre-5.10.53-gnu/include/net/dst_metadata.h
@@ -45,7 +45,9 @@ skb_tunnel_info(const struct sk_buff *skb)
 		return &md_dst->u.tun_info;
 
 	dst = skb_dst(skb);
-	if (dst && dst->lwtstate)
+	if (dst && dst->lwtstate &&
+	    (dst->lwtstate->type == LWTUNNEL_ENCAP_IP ||
+	     dst->lwtstate->type == LWTUNNEL_ENCAP_IP6))
 		return lwt_tun_info(dst->lwtstate);
 
 	return NULL;
diff --git linux-libre-5.10.52-gnu/include/net/ip6_route.h linux-libre-5.10.53-gnu/include/net/ip6_route.h
index 37a7fb1969d6..42fe4e1b6a8c 100644
--- linux-libre-5.10.52-gnu/include/net/ip6_route.h
+++ linux-libre-5.10.53-gnu/include/net/ip6_route.h
@@ -262,7 +262,7 @@ static inline bool ipv6_anycast_destination(const struct dst_entry *dst,
 int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
 		 int (*output)(struct net *, struct sock *, struct sk_buff *));
 
-static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
+static inline unsigned int ip6_skb_dst_mtu(struct sk_buff *skb)
 {
 	int mtu;
 
diff --git linux-libre-5.10.52-gnu/include/net/tcp.h linux-libre-5.10.53-gnu/include/net/tcp.h
index 7d66c61d22c7..eff611da5780 100644
--- linux-libre-5.10.52-gnu/include/net/tcp.h
+++ linux-libre-5.10.53-gnu/include/net/tcp.h
@@ -676,6 +676,10 @@ static inline u32 __tcp_set_rto(const struct tcp_sock *tp)
 
 static inline void __tcp_fast_path_on(struct tcp_sock *tp, u32 snd_wnd)
 {
+	/* mptcp hooks are only on the slow path */
+	if (sk_is_mptcp((struct sock *)tp))
+		return;
+
 	tp->pred_flags = htonl((tp->tcp_header_len << 26) |
 			       ntohl(TCP_FLAG_ACK) |
 			       snd_wnd);
diff --git linux-libre-5.10.52-gnu/kernel/bpf/core.c linux-libre-5.10.53-gnu/kernel/bpf/core.c
index 239c6b3b5993..75c2d184018a 100644
--- linux-libre-5.10.52-gnu/kernel/bpf/core.c
+++ linux-libre-5.10.53-gnu/kernel/bpf/core.c
@@ -2167,8 +2167,14 @@ static void bpf_prog_free_deferred(struct work_struct *work)
 #endif
 	if (aux->dst_trampoline)
 		bpf_trampoline_put(aux->dst_trampoline);
-	for (i = 0; i < aux->func_cnt; i++)
+	for (i = 0; i < aux->func_cnt; i++) {
+		/* We can just unlink the subprog poke descriptor table as
+		 * it was originally linked to the main program and is also
+		 * released along with it.
+		 */
+		aux->func[i]->aux->poke_tab = NULL;
 		bpf_jit_free(aux->func[i]);
+	}
 	if (aux->func_cnt) {
 		kfree(aux->func);
 		bpf_prog_unlock_free(aux->prog);
diff --git linux-libre-5.10.52-gnu/kernel/bpf/verifier.c linux-libre-5.10.53-gnu/kernel/bpf/verifier.c
index bf6798fb2331..1f8bf2b39d50 100644
--- linux-libre-5.10.52-gnu/kernel/bpf/verifier.c
+++ linux-libre-5.10.53-gnu/kernel/bpf/verifier.c
@@ -11157,33 +11157,19 @@ static int jit_subprogs(struct bpf_verifier_env *env)
 			goto out_free;
 		func[i]->is_func = 1;
 		func[i]->aux->func_idx = i;
-		/* the btf and func_info will be freed only at prog->aux */
+		/* Below members will be freed only at prog->aux */
 		func[i]->aux->btf = prog->aux->btf;
 		func[i]->aux->func_info = prog->aux->func_info;
+		func[i]->aux->poke_tab = prog->aux->poke_tab;
+		func[i]->aux->size_poke_tab = prog->aux->size_poke_tab;
 
 		for (j = 0; j < prog->aux->size_poke_tab; j++) {
-			u32 insn_idx = prog->aux->poke_tab[j].insn_idx;
-			int ret;
+			struct bpf_jit_poke_descriptor *poke;
 
-			if (!(insn_idx >= subprog_start &&
-			      insn_idx <= subprog_end))
-				continue;
-
-			ret = bpf_jit_add_poke_descriptor(func[i],
-							  &prog->aux->poke_tab[j]);
-			if (ret < 0) {
-				verbose(env, "adding tail call poke descriptor failed\n");
-				goto out_free;
-			}
-
-			func[i]->insnsi[insn_idx - subprog_start].imm = ret + 1;
-
-			map_ptr = func[i]->aux->poke_tab[ret].tail_call.map;
-			ret = map_ptr->ops->map_poke_track(map_ptr, func[i]->aux);
-			if (ret < 0) {
-				verbose(env, "tracking tail call prog failed\n");
-				goto out_free;
-			}
+			poke = &prog->aux->poke_tab[j];
+			if (poke->insn_idx < subprog_end &&
+			    poke->insn_idx >= subprog_start)
+				poke->aux = func[i]->aux;
 		}
 
 		/* Use bpf_prog_F_tag to indicate functions in stack traces.
@@ -11213,18 +11199,6 @@ static int jit_subprogs(struct bpf_verifier_env *env)
 		cond_resched();
 	}
 
-	/* Untrack main program's aux structs so that during map_poke_run()
-	 * we will not stumble upon the unfilled poke descriptors; each
-	 * of the main program's poke descs got distributed across subprogs
-	 * and got tracked onto map, so we are sure that none of them will
-	 * be missed after the operation below
-	 */
-	for (i = 0; i < prog->aux->size_poke_tab; i++) {
-		map_ptr = prog->aux->poke_tab[i].tail_call.map;
-
-		map_ptr->ops->map_poke_untrack(map_ptr, prog->aux);
-	}
-
 	/* at this point all bpf functions were successfully JITed
 	 * now populate all bpf_calls with correct addresses and
 	 * run last pass of JIT
@@ -11293,14 +11267,22 @@ static int jit_subprogs(struct bpf_verifier_env *env)
 	bpf_prog_free_unused_jited_linfo(prog);
 	return 0;
 out_free:
+	/* We failed JIT'ing, so at this point we need to unregister poke
+	 * descriptors from subprogs, so that kernel is not attempting to
+	 * patch it anymore as we're freeing the subprog JIT memory.
+	 */
+	for (i = 0; i < prog->aux->size_poke_tab; i++) {
+		map_ptr = prog->aux->poke_tab[i].tail_call.map;
+		map_ptr->ops->map_poke_untrack(map_ptr, prog->aux);
+	}
+	/* At this point we're guaranteed that poke descriptors are not
+	 * live anymore. We can just unlink its descriptor table as it's
+	 * released with the main prog.
+	 */
 	for (i = 0; i < env->subprog_cnt; i++) {
 		if (!func[i])
 			continue;
-
-		for (j = 0; j < func[i]->aux->size_poke_tab; j++) {
-			map_ptr = func[i]->aux->poke_tab[j].tail_call.map;
-			map_ptr->ops->map_poke_untrack(map_ptr, func[i]->aux);
-		}
+		func[i]->aux->poke_tab = NULL;
 		bpf_jit_free(func[i]);
 	}
 	kfree(func);
diff --git linux-libre-5.10.52-gnu/kernel/sched/fair.c linux-libre-5.10.53-gnu/kernel/sched/fair.c
index 32c0905bca84..262b02d75007 100644
--- linux-libre-5.10.52-gnu/kernel/sched/fair.c
+++ linux-libre-5.10.53-gnu/kernel/sched/fair.c
@@ -5047,7 +5047,7 @@ static const u64 cfs_bandwidth_slack_period = 5 * NSEC_PER_MSEC;
 static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 {
 	struct hrtimer *refresh_timer = &cfs_b->period_timer;
-	u64 remaining;
+	s64 remaining;
 
 	/* if the call-back is running a quota refresh is already occurring */
 	if (hrtimer_callback_running(refresh_timer))
@@ -5055,7 +5055,7 @@ static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 
 	/* is a quota refresh about to occur? */
 	remaining = ktime_to_ns(hrtimer_expires_remaining(refresh_timer));
-	if (remaining < min_expire)
+	if (remaining < (s64)min_expire)
 		return 1;
 
 	return 0;
diff --git linux-libre-5.10.52-gnu/mm/huge_memory.c linux-libre-5.10.53-gnu/mm/huge_memory.c
index 9fe622ff2fc4..594368f6134f 100644
--- linux-libre-5.10.52-gnu/mm/huge_memory.c
+++ linux-libre-5.10.53-gnu/mm/huge_memory.c
@@ -1012,7 +1012,7 @@ struct page *follow_devmap_pmd(struct vm_area_struct *vma, unsigned long addr,
 
 int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		  pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr,
-		  struct vm_area_struct *vma)
+		  struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma)
 {
 	spinlock_t *dst_ptl, *src_ptl;
 	struct page *src_page;
@@ -1021,7 +1021,7 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 	int ret = -ENOMEM;
 
 	/* Skip if can be re-fill on fault */
-	if (!vma_is_anonymous(vma))
+	if (!vma_is_anonymous(dst_vma))
 		return 0;
 
 	pgtable = pte_alloc_one(dst_mm);
@@ -1035,14 +1035,6 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 	ret = -EAGAIN;
 	pmd = *src_pmd;
 
-	/*
-	 * Make sure the _PAGE_UFFD_WP bit is cleared if the new VMA
-	 * does not have the VM_UFFD_WP, which means that the uffd
-	 * fork event is not enabled.
-	 */
-	if (!(vma->vm_flags & VM_UFFD_WP))
-		pmd = pmd_clear_uffd_wp(pmd);
-
 #ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
 	if (unlikely(is_swap_pmd(pmd))) {
 		swp_entry_t entry = pmd_to_swp_entry(pmd);
@@ -1053,11 +1045,15 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 			pmd = swp_entry_to_pmd(entry);
 			if (pmd_swp_soft_dirty(*src_pmd))
 				pmd = pmd_swp_mksoft_dirty(pmd);
+			if (pmd_swp_uffd_wp(*src_pmd))
+				pmd = pmd_swp_mkuffd_wp(pmd);
 			set_pmd_at(src_mm, addr, src_pmd, pmd);
 		}
 		add_mm_counter(dst_mm, MM_ANONPAGES, HPAGE_PMD_NR);
 		mm_inc_nr_ptes(dst_mm);
 		pgtable_trans_huge_deposit(dst_mm, dst_pmd, pgtable);
+		if (!userfaultfd_wp(dst_vma))
+			pmd = pmd_swp_clear_uffd_wp(pmd);
 		set_pmd_at(dst_mm, addr, dst_pmd, pmd);
 		ret = 0;
 		goto out_unlock;
@@ -1074,17 +1070,13 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 	 * a page table.
 	 */
 	if (is_huge_zero_pmd(pmd)) {
-		struct page *zero_page;
 		/*
 		 * get_huge_zero_page() will never allocate a new page here,
 		 * since we already have a zero page to copy. It just takes a
 		 * reference.
 		 */
-		zero_page = mm_get_huge_zero_page(dst_mm);
-		set_huge_zero_page(pgtable, dst_mm, vma, addr, dst_pmd,
-				zero_page);
-		ret = 0;
-		goto out_unlock;
+		mm_get_huge_zero_page(dst_mm);
+		goto out_zero_page;
 	}
 
 	src_page = pmd_page(pmd);
@@ -1097,23 +1089,25 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 	 * best effort that the pinned pages won't be replaced by another
 	 * random page during the coming copy-on-write.
 	 */
-	if (unlikely(is_cow_mapping(vma->vm_flags) &&
+	if (unlikely(is_cow_mapping(src_vma->vm_flags) &&
 		     atomic_read(&src_mm->has_pinned) &&
 		     page_maybe_dma_pinned(src_page))) {
 		pte_free(dst_mm, pgtable);
 		spin_unlock(src_ptl);
 		spin_unlock(dst_ptl);
-		__split_huge_pmd(vma, src_pmd, addr, false, NULL);
+		__split_huge_pmd(src_vma, src_pmd, addr, false, NULL);
 		return -EAGAIN;
 	}
 
 	get_page(src_page);
 	page_dup_rmap(src_page, true);
 	add_mm_counter(dst_mm, MM_ANONPAGES, HPAGE_PMD_NR);
+out_zero_page:
 	mm_inc_nr_ptes(dst_mm);
 	pgtable_trans_huge_deposit(dst_mm, dst_pmd, pgtable);
-
 	pmdp_set_wrprotect(src_mm, addr, src_pmd);
+	if (!userfaultfd_wp(dst_vma))
+		pmd = pmd_clear_uffd_wp(pmd);
 	pmd = pmd_mkold(pmd_wrprotect(pmd));
 	set_pmd_at(dst_mm, addr, dst_pmd, pmd);
 
@@ -1832,6 +1826,8 @@ int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
 			newpmd = swp_entry_to_pmd(entry);
 			if (pmd_swp_soft_dirty(*pmd))
 				newpmd = pmd_swp_mksoft_dirty(newpmd);
+			if (pmd_swp_uffd_wp(*pmd))
+				newpmd = pmd_swp_mkuffd_wp(newpmd);
 			set_pmd_at(mm, addr, pmd, newpmd);
 		}
 		goto unlock;
@@ -2998,6 +2994,8 @@ void remove_migration_pmd(struct page_vma_mapped_walk *pvmw, struct page *new)
 		pmde = pmd_mksoft_dirty(pmde);
 	if (is_write_migration_entry(entry))
 		pmde = maybe_pmd_mkwrite(pmde, vma);
+	if (pmd_swp_uffd_wp(*pvmw->pmd))
+		pmde = pmd_wrprotect(pmd_mkuffd_wp(pmde));
 
 	flush_cache_range(vma, mmun_start, mmun_start + HPAGE_PMD_SIZE);
 	if (PageAnon(new))
diff --git linux-libre-5.10.52-gnu/mm/memory.c linux-libre-5.10.53-gnu/mm/memory.c
index 0a905e0a7e67..4fe24cd865a7 100644
--- linux-libre-5.10.52-gnu/mm/memory.c
+++ linux-libre-5.10.53-gnu/mm/memory.c
@@ -696,10 +696,10 @@ out:
 
 static unsigned long
 copy_nonpresent_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
-		pte_t *dst_pte, pte_t *src_pte, struct vm_area_struct *vma,
-		unsigned long addr, int *rss)
+		pte_t *dst_pte, pte_t *src_pte, struct vm_area_struct *dst_vma,
+		struct vm_area_struct *src_vma, unsigned long addr, int *rss)
 {
-	unsigned long vm_flags = vma->vm_flags;
+	unsigned long vm_flags = dst_vma->vm_flags;
 	pte_t pte = *src_pte;
 	struct page *page;
 	swp_entry_t entry = pte_to_swp_entry(pte);
@@ -768,6 +768,8 @@ copy_nonpresent_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 			set_pte_at(src_mm, addr, src_pte, pte);
 		}
 	}
+	if (!userfaultfd_wp(dst_vma))
+		pte = pte_swp_clear_uffd_wp(pte);
 	set_pte_at(dst_mm, addr, dst_pte, pte);
 	return 0;
 }
@@ -839,6 +841,9 @@ copy_present_page(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma
 	/* All done, just insert the new page copy in the child */
 	pte = mk_pte(new_page, dst_vma->vm_page_prot);
 	pte = maybe_mkwrite(pte_mkdirty(pte), dst_vma);
+	if (userfaultfd_pte_wp(dst_vma, *src_pte))
+		/* Uffd-wp needs to be delivered to dest pte as well */
+		pte = pte_wrprotect(pte_mkuffd_wp(pte));
 	set_pte_at(dst_vma->vm_mm, addr, dst_pte, pte);
 	return 0;
 }
@@ -888,12 +893,7 @@ copy_present_pte(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
 		pte = pte_mkclean(pte);
 	pte = pte_mkold(pte);
 
-	/*
-	 * Make sure the _PAGE_UFFD_WP bit is cleared if the new VMA
-	 * does not have the VM_UFFD_WP, which means that the uffd
-	 * fork event is not enabled.
-	 */
-	if (!(vm_flags & VM_UFFD_WP))
+	if (!userfaultfd_wp(dst_vma))
 		pte = pte_clear_uffd_wp(pte);
 
 	set_pte_at(dst_vma->vm_mm, addr, dst_pte, pte);
@@ -968,7 +968,8 @@ again:
 		if (unlikely(!pte_present(*src_pte))) {
 			entry.val = copy_nonpresent_pte(dst_mm, src_mm,
 							dst_pte, src_pte,
-							src_vma, addr, rss);
+							dst_vma, src_vma,
+							addr, rss);
 			if (entry.val)
 				break;
 			progress += 8;
@@ -1045,8 +1046,8 @@ copy_pmd_range(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
 			|| pmd_devmap(*src_pmd)) {
 			int err;
 			VM_BUG_ON_VMA(next-addr != HPAGE_PMD_SIZE, src_vma);
-			err = copy_huge_pmd(dst_mm, src_mm,
-					    dst_pmd, src_pmd, addr, src_vma);
+			err = copy_huge_pmd(dst_mm, src_mm, dst_pmd, src_pmd,
+					    addr, dst_vma, src_vma);
 			if (err == -ENOMEM)
 				return -ENOMEM;
 			if (!err)
@@ -3302,7 +3303,6 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 {
 	struct vm_area_struct *vma = vmf->vma;
 	struct page *page = NULL, *swapcache;
-	struct swap_info_struct *si = NULL;
 	swp_entry_t entry;
 	pte_t pte;
 	int locked;
@@ -3330,16 +3330,14 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 		goto out;
 	}
 
-	/* Prevent swapoff from happening to us. */
-	si = get_swap_device(entry);
-	if (unlikely(!si))
-		goto out;
 
 	delayacct_set_flag(DELAYACCT_PF_SWAPIN);
 	page = lookup_swap_cache(entry, vma, vmf->address);
 	swapcache = page;
 
 	if (!page) {
+		struct swap_info_struct *si = swp_swap_info(entry);
+
 		if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
 		    __swap_count(entry) == 1) {
 			/* skip swapcache */
@@ -3510,8 +3508,6 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 unlock:
 	pte_unmap_unlock(vmf->pte, vmf->ptl);
 out:
-	if (si)
-		put_swap_device(si);
 	return ret;
 out_nomap:
 	pte_unmap_unlock(vmf->pte, vmf->ptl);
@@ -3523,8 +3519,6 @@ out_release:
 		unlock_page(swapcache);
 		put_page(swapcache);
 	}
-	if (si)
-		put_swap_device(si);
 	return ret;
 }
 
diff --git linux-libre-5.10.52-gnu/mm/page_alloc.c linux-libre-5.10.53-gnu/mm/page_alloc.c
index e30d88efd7fb..0166558d3d64 100644
--- linux-libre-5.10.52-gnu/mm/page_alloc.c
+++ linux-libre-5.10.53-gnu/mm/page_alloc.c
@@ -6129,7 +6129,7 @@ void __ref memmap_init_zone_device(struct zone *zone,
 		return;
 
 	/*
-	 * The call to memmap_init_zone should have already taken care
+	 * The call to memmap_init should have already taken care
 	 * of the pages reserved for the memmap, so we can just jump to
 	 * the end of that region and start processing the device pages.
 	 */
@@ -6194,7 +6194,7 @@ static void __meminit zone_init_free_lists(struct zone *zone)
 /*
  * Only struct pages that correspond to ranges defined by memblock.memory
  * are zeroed and initialized by going through __init_single_page() during
- * memmap_init_zone().
+ * memmap_init_zone_range().
  *
  * But, there could be struct pages that correspond to holes in
  * memblock.memory. This can happen because of the following reasons:
@@ -6213,9 +6213,9 @@ static void __meminit zone_init_free_lists(struct zone *zone)
  *   zone/node above the hole except for the trailing pages in the last
  *   section that will be appended to the zone/node below.
  */
-static u64 __meminit init_unavailable_range(unsigned long spfn,
-					    unsigned long epfn,
-					    int zone, int node)
+static void __init init_unavailable_range(unsigned long spfn,
+					  unsigned long epfn,
+					  int zone, int node)
 {
 	unsigned long pfn;
 	u64 pgcnt = 0;
@@ -6231,58 +6231,84 @@ static u64 __meminit init_unavailable_range(unsigned long spfn,
 		pgcnt++;
 	}
 
-	return pgcnt;
+	if (pgcnt)
+		pr_info("On node %d, zone %s: %lld pages in unavailable ranges",
+			node, zone_names[zone], pgcnt);
 }
 #else
-static inline u64 init_unavailable_range(unsigned long spfn, unsigned long epfn,
-					 int zone, int node)
+static inline void init_unavailable_range(unsigned long spfn,
+					  unsigned long epfn,
+					  int zone, int node)
 {
-	return 0;
 }
 #endif
 
-void __meminit __weak memmap_init(unsigned long size, int nid,
-				  unsigned long zone,
-				  unsigned long range_start_pfn)
+static void __init memmap_init_zone_range(struct zone *zone,
+					  unsigned long start_pfn,
+					  unsigned long end_pfn,
+					  unsigned long *hole_pfn)
+{
+	unsigned long zone_start_pfn = zone->zone_start_pfn;
+	unsigned long zone_end_pfn = zone_start_pfn + zone->spanned_pages;
+	int nid = zone_to_nid(zone), zone_id = zone_idx(zone);
+
+	start_pfn = clamp(start_pfn, zone_start_pfn, zone_end_pfn);
+	end_pfn = clamp(end_pfn, zone_start_pfn, zone_end_pfn);
+
+	if (start_pfn >= end_pfn)
+		return;
+
+	memmap_init_zone(end_pfn - start_pfn, nid, zone_id, start_pfn,
+			  zone_end_pfn, MEMINIT_EARLY, NULL, MIGRATE_MOVABLE);
+
+	if (*hole_pfn < start_pfn)
+		init_unavailable_range(*hole_pfn, start_pfn, zone_id, nid);
+
+	*hole_pfn = end_pfn;
+}
+
+void __init __weak memmap_init(void)
 {
-	static unsigned long hole_pfn;
 	unsigned long start_pfn, end_pfn;
-	unsigned long range_end_pfn = range_start_pfn + size;
-	int i;
-	u64 pgcnt = 0;
+	unsigned long hole_pfn = 0;
+	int i, j, zone_id, nid;
 
-	for_each_mem_pfn_range(i, nid, &start_pfn, &end_pfn, NULL) {
-		start_pfn = clamp(start_pfn, range_start_pfn, range_end_pfn);
-		end_pfn = clamp(end_pfn, range_start_pfn, range_end_pfn);
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
+		struct pglist_data *node = NODE_DATA(nid);
 
-		if (end_pfn > start_pfn) {
-			size = end_pfn - start_pfn;
-			memmap_init_zone(size, nid, zone, start_pfn, range_end_pfn,
-					 MEMINIT_EARLY, NULL, MIGRATE_MOVABLE);
-		}
+		for (j = 0; j < MAX_NR_ZONES; j++) {
+			struct zone *zone = node->node_zones + j;
+
+			if (!populated_zone(zone))
+				continue;
 
-		if (hole_pfn < start_pfn)
-			pgcnt += init_unavailable_range(hole_pfn, start_pfn,
-							zone, nid);
-		hole_pfn = end_pfn;
+			memmap_init_zone_range(zone, start_pfn, end_pfn,
+					       &hole_pfn);
+			zone_id = j;
+		}
 	}
 
 #ifdef CONFIG_SPARSEMEM
 	/*
-	 * Initialize the hole in the range [zone_end_pfn, section_end].
-	 * If zone boundary falls in the middle of a section, this hole
-	 * will be re-initialized during the call to this function for the
-	 * higher zone.
+	 * Initialize the memory map for hole in the range [memory_end,
+	 * section_end].
+	 * Append the pages in this hole to the highest zone in the last
+	 * node.
+	 * The call to init_unavailable_range() is outside the ifdef to
+	 * silence the compiler warining about zone_id set but not used;
+	 * for FLATMEM it is a nop anyway
 	 */
-	end_pfn = round_up(range_end_pfn, PAGES_PER_SECTION);
+	end_pfn = round_up(end_pfn, PAGES_PER_SECTION);
 	if (hole_pfn < end_pfn)
-		pgcnt += init_unavailable_range(hole_pfn, end_pfn,
-						zone, nid);
 #endif
+		init_unavailable_range(hole_pfn, end_pfn, zone_id, nid);
+}
 
-	if (pgcnt)
-		pr_info("  %s zone: %llu pages in unavailable ranges\n",
-			zone_names[zone], pgcnt);
+/* A stub for backwards compatibility with custom implementatin on IA-64 */
+void __meminit __weak arch_memmap_init(unsigned long size, int nid,
+				       unsigned long zone,
+				       unsigned long range_start_pfn)
+{
 }
 
 static int zone_batchsize(struct zone *zone)
@@ -6981,7 +7007,7 @@ static void __init free_area_init_core(struct pglist_data *pgdat)
 		set_pageblock_order();
 		setup_usemap(pgdat, zone, zone_start_pfn, size);
 		init_currently_empty_zone(zone, zone_start_pfn, size);
-		memmap_init(size, nid, j, zone_start_pfn);
+		arch_memmap_init(size, nid, j, zone_start_pfn);
 	}
 }
 
@@ -7507,6 +7533,8 @@ void __init free_area_init(unsigned long *max_zone_pfn)
 			node_set_state(nid, N_MEMORY);
 		check_for_memory(pgdat, nid);
 	}
+
+	memmap_init();
 }
 
 static int __init cmdline_parse_core(char *p, unsigned long *core,
diff --git linux-libre-5.10.52-gnu/mm/shmem.c linux-libre-5.10.53-gnu/mm/shmem.c
index 96df61c8af65..ae8adca3b56d 100644
--- linux-libre-5.10.52-gnu/mm/shmem.c
+++ linux-libre-5.10.53-gnu/mm/shmem.c
@@ -1698,8 +1698,7 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
 	struct address_space *mapping = inode->i_mapping;
 	struct shmem_inode_info *info = SHMEM_I(inode);
 	struct mm_struct *charge_mm = vma ? vma->vm_mm : current->mm;
-	struct swap_info_struct *si;
-	struct page *page = NULL;
+	struct page *page;
 	swp_entry_t swap;
 	int error;
 
@@ -1707,12 +1706,6 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
 	swap = radix_to_swp_entry(*pagep);
 	*pagep = NULL;
 
-	/* Prevent swapoff from happening to us. */
-	si = get_swap_device(swap);
-	if (!si) {
-		error = EINVAL;
-		goto failed;
-	}
 	/* Look it up and read it in.. */
 	page = lookup_swap_cache(swap, NULL, 0);
 	if (!page) {
@@ -1774,8 +1767,6 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
 	swap_free(swap);
 
 	*pagep = page;
-	if (si)
-		put_swap_device(si);
 	return 0;
 failed:
 	if (!shmem_confirm_swap(mapping, index, swap))
@@ -1786,9 +1777,6 @@ unlock:
 		put_page(page);
 	}
 
-	if (si)
-		put_swap_device(si);
-
 	return error;
 }
 
diff --git linux-libre-5.10.52-gnu/net/bridge/br_if.c linux-libre-5.10.53-gnu/net/bridge/br_if.c
index a0e9a7937412..857a2c512ca3 100644
--- linux-libre-5.10.52-gnu/net/bridge/br_if.c
+++ linux-libre-5.10.53-gnu/net/bridge/br_if.c
@@ -561,7 +561,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev,
 	struct net_bridge_port *p;
 	int err = 0;
 	unsigned br_hr, dev_hr;
-	bool changed_addr;
+	bool changed_addr, fdb_synced = false;
 
 	/* Don't allow bridging non-ethernet like devices. */
 	if ((dev->flags & IFF_LOOPBACK) ||
@@ -651,6 +651,19 @@ int br_add_if(struct net_bridge *br, struct net_device *dev,
 	list_add_rcu(&p->list, &br->port_list);
 
 	nbp_update_port_count(br);
+	if (!br_promisc_port(p) && (p->dev->priv_flags & IFF_UNICAST_FLT)) {
+		/* When updating the port count we also update all ports'
+		 * promiscuous mode.
+		 * A port leaving promiscuous mode normally gets the bridge's
+		 * fdb synced to the unicast filter (if supported), however,
+		 * `br_port_clear_promisc` does not distinguish between
+		 * non-promiscuous ports and *new* ports, so we need to
+		 * sync explicitly here.
+		 */
+		fdb_synced = br_fdb_sync_static(br, p) == 0;
+		if (!fdb_synced)
+			netdev_err(dev, "failed to sync bridge static fdb addresses to this port\n");
+	}
 
 	netdev_update_features(br->dev);
 
@@ -700,6 +713,8 @@ int br_add_if(struct net_bridge *br, struct net_device *dev,
 	return 0;
 
 err7:
+	if (fdb_synced)
+		br_fdb_unsync_static(br, p);
 	list_del_rcu(&p->list);
 	br_fdb_delete_by_port(br, p, 0, 1);
 	nbp_update_port_count(br);
diff --git linux-libre-5.10.52-gnu/net/dsa/switch.c linux-libre-5.10.53-gnu/net/dsa/switch.c
index 3fb362b6874e..a44035872cff 100644
--- linux-libre-5.10.52-gnu/net/dsa/switch.c
+++ linux-libre-5.10.53-gnu/net/dsa/switch.c
@@ -112,11 +112,11 @@ static int dsa_switch_bridge_leave(struct dsa_switch *ds,
 	int err, i;
 
 	if (dst->index == info->tree_index && ds->index == info->sw_index &&
-	    ds->ops->port_bridge_join)
+	    ds->ops->port_bridge_leave)
 		ds->ops->port_bridge_leave(ds, info->port, info->br);
 
 	if ((dst->index != info->tree_index || ds->index != info->sw_index) &&
-	    ds->ops->crosschip_bridge_join)
+	    ds->ops->crosschip_bridge_leave)
 		ds->ops->crosschip_bridge_leave(ds, info->tree_index,
 						info->sw_index, info->port,
 						info->br);
diff --git linux-libre-5.10.52-gnu/net/ipv4/ip_tunnel.c linux-libre-5.10.53-gnu/net/ipv4/ip_tunnel.c
index f6cc26de5ed3..0dca00745ac3 100644
--- linux-libre-5.10.52-gnu/net/ipv4/ip_tunnel.c
+++ linux-libre-5.10.53-gnu/net/ipv4/ip_tunnel.c
@@ -317,7 +317,7 @@ static int ip_tunnel_bind_dev(struct net_device *dev)
 	}
 
 	dev->needed_headroom = t_hlen + hlen;
-	mtu -= t_hlen;
+	mtu -= t_hlen + (dev->type == ARPHRD_ETHER ? dev->hard_header_len : 0);
 
 	if (mtu < IPV4_MIN_MTU)
 		mtu = IPV4_MIN_MTU;
@@ -348,6 +348,9 @@ static struct ip_tunnel *ip_tunnel_create(struct net *net,
 	t_hlen = nt->hlen + sizeof(struct iphdr);
 	dev->min_mtu = ETH_MIN_MTU;
 	dev->max_mtu = IP_MAX_MTU - t_hlen;
+	if (dev->type == ARPHRD_ETHER)
+		dev->max_mtu -= dev->hard_header_len;
+
 	ip_tunnel_add(itn, nt);
 	return nt;
 
@@ -489,11 +492,14 @@ static int tnl_update_pmtu(struct net_device *dev, struct sk_buff *skb,
 
 	tunnel_hlen = md ? tunnel_hlen : tunnel->hlen;
 	pkt_size = skb->len - tunnel_hlen;
+	pkt_size -= dev->type == ARPHRD_ETHER ? dev->hard_header_len : 0;
 
-	if (df)
+	if (df) {
 		mtu = dst_mtu(&rt->dst) - (sizeof(struct iphdr) + tunnel_hlen);
-	else
+		mtu -= dev->type == ARPHRD_ETHER ? dev->hard_header_len : 0;
+	} else {
 		mtu = skb_valid_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
+	}
 
 	if (skb_valid_dst(skb))
 		skb_dst_update_pmtu_no_confirm(skb, mtu);
@@ -972,6 +978,9 @@ int __ip_tunnel_change_mtu(struct net_device *dev, int new_mtu, bool strict)
 	int t_hlen = tunnel->hlen + sizeof(struct iphdr);
 	int max_mtu = IP_MAX_MTU - t_hlen;
 
+	if (dev->type == ARPHRD_ETHER)
+		max_mtu -= dev->hard_header_len;
+
 	if (new_mtu < ETH_MIN_MTU)
 		return -EINVAL;
 
@@ -1149,6 +1158,9 @@ int ip_tunnel_newlink(struct net_device *dev, struct nlattr *tb[],
 	if (tb[IFLA_MTU]) {
 		unsigned int max = IP_MAX_MTU - (nt->hlen + sizeof(struct iphdr));
 
+		if (dev->type == ARPHRD_ETHER)
+			max -= dev->hard_header_len;
+
 		mtu = clamp(dev->mtu, (unsigned int)ETH_MIN_MTU, max);
 	}
 
diff --git linux-libre-5.10.52-gnu/net/ipv4/tcp.c linux-libre-5.10.53-gnu/net/ipv4/tcp.c
index 2384ac048bea..54230852e5f9 100644
--- linux-libre-5.10.52-gnu/net/ipv4/tcp.c
+++ linux-libre-5.10.53-gnu/net/ipv4/tcp.c
@@ -1361,6 +1361,9 @@ new_segment:
 			}
 			pfrag->offset += copy;
 		} else {
+			if (!sk_wmem_schedule(sk, copy))
+				goto wait_for_space;
+
 			err = skb_zerocopy_iter_stream(sk, skb, msg, copy, uarg);
 			if (err == -EMSGSIZE || err == -EEXIST) {
 				tcp_mark_push(tp, skb);
diff --git linux-libre-5.10.52-gnu/net/ipv4/tcp_input.c linux-libre-5.10.53-gnu/net/ipv4/tcp_input.c
index 4d4b641c204d..ac8d38e04400 100644
--- linux-libre-5.10.52-gnu/net/ipv4/tcp_input.c
+++ linux-libre-5.10.53-gnu/net/ipv4/tcp_input.c
@@ -5911,8 +5911,8 @@ void tcp_init_transfer(struct sock *sk, int bpf_op, struct sk_buff *skb)
 		tp->snd_cwnd = tcp_init_cwnd(tp, __sk_dst_get(sk));
 	tp->snd_cwnd_stamp = tcp_jiffies32;
 
-	icsk->icsk_ca_initialized = 0;
 	bpf_skops_established(sk, bpf_op, skb);
+	/* Initialize congestion control unless BPF initialized it already: */
 	if (!icsk->icsk_ca_initialized)
 		tcp_init_congestion_control(sk);
 	tcp_init_buffer_space(sk);
diff --git linux-libre-5.10.52-gnu/net/ipv4/tcp_ipv4.c linux-libre-5.10.53-gnu/net/ipv4/tcp_ipv4.c
index ab8ed0fc4769..5212db9ea157 100644
--- linux-libre-5.10.52-gnu/net/ipv4/tcp_ipv4.c
+++ linux-libre-5.10.53-gnu/net/ipv4/tcp_ipv4.c
@@ -342,7 +342,7 @@ void tcp_v4_mtu_reduced(struct sock *sk)
 
 	if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))
 		return;
-	mtu = tcp_sk(sk)->mtu_info;
+	mtu = READ_ONCE(tcp_sk(sk)->mtu_info);
 	dst = inet_csk_update_pmtu(sk, mtu);
 	if (!dst)
 		return;
@@ -546,7 +546,7 @@ int tcp_v4_err(struct sk_buff *skb, u32 info)
 			if (sk->sk_state == TCP_LISTEN)
 				goto out;
 
-			tp->mtu_info = info;
+			WRITE_ONCE(tp->mtu_info, info);
 			if (!sock_owned_by_user(sk)) {
 				tcp_v4_mtu_reduced(sk);
 			} else {
diff --git linux-libre-5.10.52-gnu/net/ipv4/tcp_output.c linux-libre-5.10.53-gnu/net/ipv4/tcp_output.c
index f99494637ff4..19ef4577b70d 100644
--- linux-libre-5.10.52-gnu/net/ipv4/tcp_output.c
+++ linux-libre-5.10.53-gnu/net/ipv4/tcp_output.c
@@ -1730,6 +1730,7 @@ int tcp_mtu_to_mss(struct sock *sk, int pmtu)
 	return __tcp_mtu_to_mss(sk, pmtu) -
 	       (tcp_sk(sk)->tcp_header_len - sizeof(struct tcphdr));
 }
+EXPORT_SYMBOL(tcp_mtu_to_mss);
 
 /* Inverse of above */
 int tcp_mss_to_mtu(struct sock *sk, int mss)
diff --git linux-libre-5.10.52-gnu/net/ipv4/udp.c linux-libre-5.10.53-gnu/net/ipv4/udp.c
index fbb9a11fe4a3..e73312546c5a 100644
--- linux-libre-5.10.52-gnu/net/ipv4/udp.c
+++ linux-libre-5.10.53-gnu/net/ipv4/udp.c
@@ -1097,7 +1097,7 @@ int udp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 	}
 
 	ipcm_init_sk(&ipc, inet);
-	ipc.gso_size = up->gso_size;
+	ipc.gso_size = READ_ONCE(up->gso_size);
 
 	if (msg->msg_controllen) {
 		err = udp_cmsg_send(sk, msg, &ipc.gso_size);
@@ -2655,7 +2655,7 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname,
 	case UDP_SEGMENT:
 		if (val < 0 || val > USHRT_MAX)
 			return -EINVAL;
-		up->gso_size = val;
+		WRITE_ONCE(up->gso_size, val);
 		break;
 
 	case UDP_GRO:
@@ -2750,7 +2750,7 @@ int udp_lib_getsockopt(struct sock *sk, int level, int optname,
 		break;
 
 	case UDP_SEGMENT:
-		val = up->gso_size;
+		val = READ_ONCE(up->gso_size);
 		break;
 
 	case UDP_GRO:
diff --git linux-libre-5.10.52-gnu/net/ipv6/tcp_ipv6.c linux-libre-5.10.53-gnu/net/ipv6/tcp_ipv6.c
index 3f9bb6dd1f98..df33145b876c 100644
--- linux-libre-5.10.52-gnu/net/ipv6/tcp_ipv6.c
+++ linux-libre-5.10.53-gnu/net/ipv6/tcp_ipv6.c
@@ -348,11 +348,20 @@ failure:
 static void tcp_v6_mtu_reduced(struct sock *sk)
 {
 	struct dst_entry *dst;
+	u32 mtu;
 
 	if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))
 		return;
 
-	dst = inet6_csk_update_pmtu(sk, tcp_sk(sk)->mtu_info);
+	mtu = READ_ONCE(tcp_sk(sk)->mtu_info);
+
+	/* Drop requests trying to increase our current mss.
+	 * Check done in __ip6_rt_update_pmtu() is too late.
+	 */
+	if (tcp_mtu_to_mss(sk, mtu) >= tcp_sk(sk)->mss_cache)
+		return;
+
+	dst = inet6_csk_update_pmtu(sk, mtu);
 	if (!dst)
 		return;
 
@@ -433,6 +442,8 @@ static int tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	}
 
 	if (type == ICMPV6_PKT_TOOBIG) {
+		u32 mtu = ntohl(info);
+
 		/* We are not interested in TCP_LISTEN and open_requests
 		 * (SYN-ACKs send out by Linux are always <576bytes so
 		 * they should go through unfragmented).
@@ -443,7 +454,11 @@ static int tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		if (!ip6_sk_accept_pmtu(sk))
 			goto out;
 
-		tp->mtu_info = ntohl(info);
+		if (mtu < IPV6_MIN_MTU)
+			goto out;
+
+		WRITE_ONCE(tp->mtu_info, mtu);
+
 		if (!sock_owned_by_user(sk))
 			tcp_v6_mtu_reduced(sk);
 		else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,
@@ -540,7 +555,7 @@ static int tcp_v6_send_synack(const struct sock *sk, struct dst_entry *dst,
 		opt = ireq->ipv6_opt;
 		if (!opt)
 			opt = rcu_dereference(np->opt);
-		err = ip6_xmit(sk, skb, fl6, sk->sk_mark, opt,
+		err = ip6_xmit(sk, skb, fl6, skb->mark ? : sk->sk_mark, opt,
 			       tclass, sk->sk_priority);
 		rcu_read_unlock();
 		err = net_xmit_eval(err);
diff --git linux-libre-5.10.52-gnu/net/ipv6/udp.c linux-libre-5.10.53-gnu/net/ipv6/udp.c
index e2de58d6cdce..a448b6cd4727 100644
--- linux-libre-5.10.52-gnu/net/ipv6/udp.c
+++ linux-libre-5.10.53-gnu/net/ipv6/udp.c
@@ -1294,7 +1294,7 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
 
 	ipcm6_init(&ipc6);
-	ipc6.gso_size = up->gso_size;
+	ipc6.gso_size = READ_ONCE(up->gso_size);
 	ipc6.sockc.tsflags = sk->sk_tsflags;
 	ipc6.sockc.mark = sk->sk_mark;
 
diff --git linux-libre-5.10.52-gnu/net/ipv6/xfrm6_output.c linux-libre-5.10.53-gnu/net/ipv6/xfrm6_output.c
index 8b84d534b19d..6abb45a67199 100644
--- linux-libre-5.10.52-gnu/net/ipv6/xfrm6_output.c
+++ linux-libre-5.10.53-gnu/net/ipv6/xfrm6_output.c
@@ -56,7 +56,7 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
 	struct dst_entry *dst = skb_dst(skb);
 	struct xfrm_state *x = dst->xfrm;
-	int mtu;
+	unsigned int mtu;
 	bool toobig;
 
 #ifdef CONFIG_NETFILTER
diff --git linux-libre-5.10.52-gnu/net/netfilter/nf_conntrack_netlink.c linux-libre-5.10.53-gnu/net/netfilter/nf_conntrack_netlink.c
index c1bfd8181341..cb4cfa4f61a8 100644
--- linux-libre-5.10.52-gnu/net/netfilter/nf_conntrack_netlink.c
+++ linux-libre-5.10.53-gnu/net/netfilter/nf_conntrack_netlink.c
@@ -213,6 +213,7 @@ static int ctnetlink_dump_helpinfo(struct sk_buff *skb,
 	if (!help)
 		return 0;
 
+	rcu_read_lock();
 	helper = rcu_dereference(help->helper);
 	if (!helper)
 		goto out;
@@ -228,9 +229,11 @@ static int ctnetlink_dump_helpinfo(struct sk_buff *skb,
 
 	nla_nest_end(skb, nest_helper);
 out:
+	rcu_read_unlock();
 	return 0;
 
 nla_put_failure:
+	rcu_read_unlock();
 	return -1;
 }
 
diff --git linux-libre-5.10.52-gnu/net/sched/act_ct.c linux-libre-5.10.53-gnu/net/sched/act_ct.c
index 7ef074c6dd16..812c3c70a53a 100644
--- linux-libre-5.10.52-gnu/net/sched/act_ct.c
+++ linux-libre-5.10.53-gnu/net/sched/act_ct.c
@@ -320,11 +320,22 @@ err_alloc:
 
 static void tcf_ct_flow_table_cleanup_work(struct work_struct *work)
 {
+	struct flow_block_cb *block_cb, *tmp_cb;
 	struct tcf_ct_flow_table *ct_ft;
+	struct flow_block *block;
 
 	ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table,
 			     rwork);
 	nf_flow_table_free(&ct_ft->nf_ft);
+
+	/* Remove any remaining callbacks before cleanup */
+	block = &ct_ft->nf_ft.flow_block;
+	down_write(&ct_ft->nf_ft.flow_block_lock);
+	list_for_each_entry_safe(block_cb, tmp_cb, &block->cb_list, list) {
+		list_del(&block_cb->list);
+		flow_block_cb_free(block_cb);
+	}
+	up_write(&ct_ft->nf_ft.flow_block_lock);
 	kfree(ct_ft);
 
 	module_put(THIS_MODULE);
@@ -1023,7 +1034,8 @@ do_nat:
 		/* This will take care of sending queued events
 		 * even if the connection is already confirmed.
 		 */
-		nf_conntrack_confirm(skb);
+		if (nf_conntrack_confirm(skb) != NF_ACCEPT)
+			goto drop;
 	}
 
 	if (!skip_add)
diff --git linux-libre-5.10.52-gnu/scripts/Kbuild.include linux-libre-5.10.53-gnu/scripts/Kbuild.include
index 08e011175b4c..0d6e11820791 100644
--- linux-libre-5.10.52-gnu/scripts/Kbuild.include
+++ linux-libre-5.10.53-gnu/scripts/Kbuild.include
@@ -174,8 +174,13 @@ clean := -f $(srctree)/scripts/Makefile.clean obj
 echo-cmd = $(if $($(quiet)cmd_$(1)),\
 	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
 
+# sink stdout for 'make -s'
+       redirect :=
+ quiet_redirect :=
+silent_redirect := exec >/dev/null;
+
 # printing commands
-cmd = @set -e; $(echo-cmd) $(cmd_$(1))
+cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(cmd_$(1))
 
 ###
 # if_changed      - execute command if any prerequisite is newer than
diff --git linux-libre-5.10.52-gnu/scripts/mkcompile_h linux-libre-5.10.53-gnu/scripts/mkcompile_h
index 4ae735039daf..a72b154de7b0 100755
--- linux-libre-5.10.52-gnu/scripts/mkcompile_h
+++ linux-libre-5.10.53-gnu/scripts/mkcompile_h
@@ -70,15 +70,23 @@ UTS_VERSION="$(echo $UTS_VERSION $CONFIG_FLAGS $TIMESTAMP | cut -b -$UTS_LEN)"
 # Only replace the real compile.h if the new one is different,
 # in order to preserve the timestamp and avoid unnecessary
 # recompilations.
-# We don't consider the file changed if only the date/time changed.
+# We don't consider the file changed if only the date/time changed,
+# unless KBUILD_BUILD_TIMESTAMP was explicitly set (e.g. for
+# reproducible builds with that value referring to a commit timestamp).
 # A kernel config change will increase the generation number, thus
 # causing compile.h to be updated (including date/time) due to the
 # changed comment in the
 # first line.
 
+if [ -z "$KBUILD_BUILD_TIMESTAMP" ]; then
+   IGNORE_PATTERN="UTS_VERSION"
+else
+   IGNORE_PATTERN="NOT_A_PATTERN_TO_BE_MATCHED"
+fi
+
 if [ -r $TARGET ] && \
-      grep -v 'UTS_VERSION' $TARGET > .tmpver.1 && \
-      grep -v 'UTS_VERSION' .tmpcompile > .tmpver.2 && \
+      grep -v $IGNORE_PATTERN $TARGET > .tmpver.1 && \
+      grep -v $IGNORE_PATTERN .tmpcompile > .tmpver.2 && \
       cmp -s .tmpver.1 .tmpver.2; then
    rm -f .tmpcompile
 else
diff --git linux-libre-5.10.52-gnu/tools/bpf/Makefile linux-libre-5.10.53-gnu/tools/bpf/Makefile
index 39bb322707b4..b11cfc86a3d0 100644
--- linux-libre-5.10.52-gnu/tools/bpf/Makefile
+++ linux-libre-5.10.53-gnu/tools/bpf/Makefile
@@ -97,7 +97,7 @@ clean: bpftool_clean runqslower_clean resolve_btfids_clean
 	$(Q)$(RM) -- $(OUTPUT)FEATURE-DUMP.bpf
 	$(Q)$(RM) -r -- $(OUTPUT)feature
 
-install: $(PROGS) bpftool_install runqslower_install
+install: $(PROGS) bpftool_install
 	$(call QUIET_INSTALL, bpf_jit_disasm)
 	$(Q)$(INSTALL) -m 0755 -d $(DESTDIR)$(prefix)/bin
 	$(Q)$(INSTALL) $(OUTPUT)bpf_jit_disasm $(DESTDIR)$(prefix)/bin/bpf_jit_disasm
@@ -118,9 +118,6 @@ bpftool_clean:
 runqslower:
 	$(call descend,runqslower)
 
-runqslower_install:
-	$(call descend,runqslower,install)
-
 runqslower_clean:
 	$(call descend,runqslower,clean)
 
@@ -131,5 +128,5 @@ resolve_btfids_clean:
 	$(call descend,resolve_btfids,clean)
 
 .PHONY: all install clean bpftool bpftool_install bpftool_clean \
-	runqslower runqslower_install runqslower_clean \
+	runqslower runqslower_clean \
 	resolve_btfids resolve_btfids_clean
diff --git linux-libre-5.10.52-gnu/tools/bpf/bpftool/jit_disasm.c linux-libre-5.10.53-gnu/tools/bpf/bpftool/jit_disasm.c
index e7e7eee9f172..24734f2249d6 100644
--- linux-libre-5.10.52-gnu/tools/bpf/bpftool/jit_disasm.c
+++ linux-libre-5.10.53-gnu/tools/bpf/bpftool/jit_disasm.c
@@ -43,11 +43,13 @@ static int fprintf_json(void *out, const char *fmt, ...)
 {
 	va_list ap;
 	char *s;
+	int err;
 
 	va_start(ap, fmt);
-	if (vasprintf(&s, fmt, ap) < 0)
-		return -1;
+	err = vasprintf(&s, fmt, ap);
 	va_end(ap);
+	if (err < 0)
+		return -1;
 
 	if (!oper_count) {
 		int i;
diff --git linux-libre-5.10.52-gnu/tools/perf/tests/bpf.c linux-libre-5.10.53-gnu/tools/perf/tests/bpf.c
index cd77e334e577..8345ff4acedf 100644
--- linux-libre-5.10.52-gnu/tools/perf/tests/bpf.c
+++ linux-libre-5.10.53-gnu/tools/perf/tests/bpf.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <errno.h>
 #include <stdio.h>
+#include <stdlib.h>
 #include <sys/epoll.h>
 #include <sys/types.h>
 #include <sys/stat.h>
@@ -283,6 +284,7 @@ static int __test__bpf(int idx)
 	}
 
 out:
+	free(obj_buf);
 	bpf__clear();
 	return ret;
 }
