diff --git linux-libre-5.12-gnu/.gitignore linux-libre-5.12.8-gnu/.gitignore
index 3af66272d6f1..127012c1f717 100644
--- linux-libre-5.12-gnu/.gitignore
+++ linux-libre-5.12.8-gnu/.gitignore
@@ -57,6 +57,7 @@ modules.order
 /tags
 /TAGS
 /linux
+/modules-only.symvers
 /vmlinux
 /vmlinux.32
 /vmlinux.symvers
diff --git linux-libre-5.12-gnu/Documentation/admin-guide/README.rst linux-libre-5.12.8-gnu/Documentation/admin-guide/README.rst
index bbe457d0c729..cbf4d553412e 100644
--- linux-libre-5.12-gnu/Documentation/admin-guide/README.rst
+++ linux-libre-5.12.8-gnu/Documentation/admin-guide/README.rst
@@ -39,6 +39,12 @@ What is GNU Linux-libre?
   promotion.  See our web page for their images.
   http://linux-libre.fsfla.org/
 
+  If you are the author of an awesome program and want to join us in
+  writing Free (libre) Software, please consider making it an official
+  GNU program and become a GNU Maintainer.  You can find instructions
+  on how to do so at https://www.gnu.org/help/evaluation.  We look
+  forward to hacking with you! :)
+
 What is Linux?
 --------------
 
diff --git linux-libre-5.12-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.12.8-gnu/Documentation/admin-guide/kernel-parameters.txt
index 04545725f187..835f810f2f26 100644
--- linux-libre-5.12-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.12.8-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -1869,13 +1869,6 @@
 			bypassed by not enabling DMAR with this option. In
 			this case, gfx device will use physical address for
 			DMA.
-		forcedac [X86-64]
-			With this option iommu will not optimize to look
-			for io virtual address below 32-bit forcing dual
-			address cycle on pci bus for cards supporting greater
-			than 32-bit addressing. The default is to look
-			for translation below 32-bit and if not available
-			then look in the higher range.
 		strict [Default Off]
 			With this option on every unmap_single operation will
 			result in a hardware IOTLB flush operation as opposed
@@ -1964,6 +1957,14 @@
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
+	iommu.forcedac=	[ARM64, X86] Control IOVA allocation for PCI devices.
+			Format: { "0" | "1" }
+			0 - Try to allocate a 32-bit DMA address first, before
+			  falling back to the full range if needed.
+			1 - Allocate directly from the full usable range,
+			  forcing Dual Address Cycle for PCI cards supporting
+			  greater than 32-bit addressing.
+
 	iommu.strict=	[ARM64] Configure TLB invalidation behaviour
 			Format: { "0" | "1" }
 			0 - Lazy mode.
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml
index fe7c4cbfe4ba..dd1a5ce5896c 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -193,23 +193,35 @@ required:
   - interrupts
   - clocks
   - power-domains
-  - resets
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,vin-r8a7778
-          - renesas,vin-r8a7779
-          - renesas,rcar-gen2-vin
-then:
-  required:
-    - port
-else:
-  required:
-    - renesas,id
-    - ports
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,vin-r8a7778
+                - renesas,vin-r8a7779
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,vin-r8a7778
+              - renesas,vin-r8a7779
+              - renesas,rcar-gen2-vin
+    then:
+      required:
+        - port
+    else:
+      required:
+        - renesas,id
+        - ports
 
 additionalProperties: false
 
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 4a2bcc0158e2..8fdfbc763d70 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -17,6 +17,7 @@ allOf:
 properties:
   compatible:
     oneOf:
+      - const: renesas,pcie-r8a7779       # R-Car H1
       - items:
           - enum:
               - renesas,pcie-r8a7742      # RZ/G1H
@@ -74,7 +75,16 @@ required:
   - clocks
   - clock-names
   - power-domains
-  - resets
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: renesas,pcie-r8a7779
+then:
+  required:
+    - resets
 
 unevaluatedProperties: false
 
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 626447fee092..7808ec8bc712 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -25,11 +25,13 @@ properties:
       - qcom,msm8998-qmp-pcie-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,msm8998-qmp-usb3-phy
+      - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-ufs-phy
       - qcom,sc8180x-qmp-usb3-phy
       - qcom,sdm845-qhp-pcie-phy
       - qcom,sdm845-qmp-pcie-phy
       - qcom,sdm845-qmp-ufs-phy
+      - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sm8150-qmp-ufs-phy
       - qcom,sm8150-qmp-usb3-phy
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index 33974ad10afe..62c0179d1765 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -14,9 +14,7 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-qmp-usb3-dp-phy
-      - qcom,sc7180-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-dp-phy
-      - qcom,sdm845-qmp-usb3-phy
   reg:
     items:
       - description: Address and length of PHY's USB serdes block.
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/serial/8250.yaml
index f54cae9ff7b2..d3f87f2bfdc2 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/serial/8250.yaml
@@ -93,11 +93,6 @@ properties:
               - mediatek,mt7622-btif
               - mediatek,mt7623-btif
           - const: mediatek,mtk-btif
-      - items:
-          - enum:
-              - mediatek,mt7622-btif
-              - mediatek,mt7623-btif
-          - const: mediatek,mtk-btif
       - items:
           - const: mrvl,mmp-uart
           - const: intel,xscale-uart
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 8631678283f9..865be05083c3 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -80,7 +80,8 @@ required:
   - interrupts
   - clocks
 
-additionalProperties: false
+additionalProperties:
+  type: object
 
 examples:
   - |
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index b33a76eeac4e..f963204e0b16 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ linux-libre-5.12.8-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -28,14 +28,7 @@ properties:
       - renesas,r8a77980-thermal # R-Car V3H
       - renesas,r8a779a0-thermal # R-Car V3U
 
-  reg:
-    minItems: 2
-    maxItems: 4
-    items:
-      - description: TSC1 registers
-      - description: TSC2 registers
-      - description: TSC3 registers
-      - description: TSC4 registers
+  reg: true
 
   interrupts:
     items:
@@ -71,8 +64,25 @@ if:
           enum:
             - renesas,r8a779a0-thermal
 then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 3
+      items:
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
   required:
     - interrupts
+else:
+  properties:
+    reg:
+      items:
+        - description: TSC0 registers
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
+        - description: TSC4 registers
 
 additionalProperties: false
 
@@ -111,3 +121,20 @@ examples:
                     };
             };
     };
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    tsc_r8a779a0: thermal@e6190000 {
+            compatible = "renesas,r8a779a0-thermal";
+            reg = <0xe6190000 0x200>,
+                  <0xe6198000 0x200>,
+                  <0xe61a0000 0x200>,
+                  <0xe61a8000 0x200>,
+                  <0xe61b0000 0x200>;
+            clocks = <&cpg CPG_MOD 919>;
+            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+            resets = <&cpg 919>;
+            #thermal-sensor-cells = <1>;
+    };
diff --git linux-libre-5.12-gnu/Documentation/dontdiff linux-libre-5.12.8-gnu/Documentation/dontdiff
index 2554abdc831a..7f99843386ce 100644
--- linux-libre-5.12-gnu/Documentation/dontdiff
+++ linux-libre-5.12.8-gnu/Documentation/dontdiff
@@ -178,6 +178,7 @@ mktables
 mktree
 mkutf8data
 modpost
+modules-only.symvers
 modules.builtin
 modules.builtin.modinfo
 modules.nsdeps
diff --git linux-libre-5.12-gnu/Documentation/driver-api/xilinx/eemi.rst linux-libre-5.12.8-gnu/Documentation/driver-api/xilinx/eemi.rst
index 9dcbc6f18d75..c1bc47b9000d 100644
--- linux-libre-5.12-gnu/Documentation/driver-api/xilinx/eemi.rst
+++ linux-libre-5.12.8-gnu/Documentation/driver-api/xilinx/eemi.rst
@@ -16,35 +16,8 @@ components running across different processing clusters on a chip or
 device to communicate with a power management controller (PMC) on a
 device to issue or respond to power management requests.
 
-EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
-The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
-structure. Any driver who want to communicate with PMC using EEMI APIs
-can call zynqmp_pm_get_eemi_ops().
-
-Example of EEMI ops::
-
-	/* zynqmp-firmware driver maintain all EEMI APIs */
-	struct zynqmp_eemi_ops {
-		int (*get_api_version)(u32 *version);
-		int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
-	};
-
-	static const struct zynqmp_eemi_ops eemi_ops = {
-		.get_api_version = zynqmp_pm_get_api_version,
-		.query_data = zynqmp_pm_query_data,
-	};
-
-Example of EEMI ops usage::
-
-	static const struct zynqmp_eemi_ops *eemi_ops;
-	u32 ret_payload[PAYLOAD_ARG_CNT];
-	int ret;
-
-	eemi_ops = zynqmp_pm_get_eemi_ops();
-	if (IS_ERR(eemi_ops))
-		return PTR_ERR(eemi_ops);
-
-	ret = eemi_ops->query_data(qdata, ret_payload);
+Any driver who wants to communicate with PMC using EEMI APIs use the
+functions provided for each function.
 
 IOCTL
 ------
diff --git linux-libre-5.12-gnu/Documentation/powerpc/syscall64-abi.rst linux-libre-5.12.8-gnu/Documentation/powerpc/syscall64-abi.rst
index dabee3729e5a..56490c4c0c07 100644
--- linux-libre-5.12-gnu/Documentation/powerpc/syscall64-abi.rst
+++ linux-libre-5.12.8-gnu/Documentation/powerpc/syscall64-abi.rst
@@ -109,6 +109,16 @@ auxiliary vector.
 
 scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
 
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
 vsyscall
 ========
 
diff --git linux-libre-5.12-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst linux-libre-5.12.8-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst
index 7f16cbe46e5c..e6a9faa81197 100644
--- linux-libre-5.12-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ linux-libre-5.12.8-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -1567,8 +1567,8 @@ The following tables list existing packed RGB formats.
       - MEDIA_BUS_FMT_RGB101010_1X30
       - 0x1018
       -
-      - 0
-      - 0
+      -
+      -
       - r\ :sub:`9`
       - r\ :sub:`8`
       - r\ :sub:`7`
diff --git linux-libre-5.12-gnu/Makefile linux-libre-5.12.8-gnu/Makefile
index 15711f4b21b8..c40b6c3877dc 100644
--- linux-libre-5.12-gnu/Makefile
+++ linux-libre-5.12.8-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 12
-SUBLEVEL = 0
+SUBLEVEL = 8
 EXTRAVERSION = -gnu
 NAME = Frozen Wasteland
 
@@ -775,16 +775,16 @@ KBUILD_CFLAGS += -Wno-gnu
 KBUILD_CFLAGS += -mno-global-merge
 else
 
-# These warnings generated too much noise in a regular build.
-# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
-KBUILD_CFLAGS += -Wno-unused-but-set-variable
-
 # Warn about unmarked fall-throughs in switch statement.
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
 endif
 
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
@@ -1513,7 +1513,7 @@ endif # CONFIG_MODULES
 # make distclean Remove editor backup files, patch leftover files and the like
 
 # Directories & files removed with 'make clean'
-CLEAN_FILES += include/ksym vmlinux.symvers \
+CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \
 	       modules.builtin modules.builtin.modinfo modules.nsdeps \
 	       compile_commands.json .thinlto-cache
 
diff --git linux-libre-5.12-gnu/arch/arc/include/asm/page.h linux-libre-5.12.8-gnu/arch/arc/include/asm/page.h
index ad9b7fe4dba3..4a9d33372fe2 100644
--- linux-libre-5.12-gnu/arch/arc/include/asm/page.h
+++ linux-libre-5.12.8-gnu/arch/arc/include/asm/page.h
@@ -7,6 +7,18 @@
 
 #include <uapi/asm/page.h>
 
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	40
+#define PAGE_MASK_PHYS			(0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+#define PAGE_MASK_PHYS			PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
 #ifndef __ASSEMBLY__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
diff --git linux-libre-5.12-gnu/arch/arc/include/asm/pgtable.h linux-libre-5.12.8-gnu/arch/arc/include/asm/pgtable.h
index 163641726a2b..5878846f00cf 100644
--- linux-libre-5.12-gnu/arch/arc/include/asm/pgtable.h
+++ linux-libre-5.12.8-gnu/arch/arc/include/asm/pgtable.h
@@ -107,8 +107,8 @@
 #define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
 
 /* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
-
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
 /* More Abbrevaited helpers */
 #define PAGE_U_NONE     __pgprot(___DEF)
 #define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
@@ -132,13 +132,7 @@
 #define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
 #define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
 
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 40
-#else
-#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 32
-#endif
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
 /**************************************************************************
  * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git linux-libre-5.12-gnu/arch/arc/include/uapi/asm/page.h linux-libre-5.12.8-gnu/arch/arc/include/uapi/asm/page.h
index 2a97e2718a21..2a4ad619abfb 100644
--- linux-libre-5.12-gnu/arch/arc/include/uapi/asm/page.h
+++ linux-libre-5.12.8-gnu/arch/arc/include/uapi/asm/page.h
@@ -33,5 +33,4 @@
 
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git linux-libre-5.12-gnu/arch/arc/kernel/entry.S linux-libre-5.12.8-gnu/arch/arc/kernel/entry.S
index 1743506081da..2cb8dfe866b6 100644
--- linux-libre-5.12-gnu/arch/arc/kernel/entry.S
+++ linux-libre-5.12.8-gnu/arch/arc/kernel/entry.S
@@ -177,7 +177,7 @@ tracesys:
 
 	; Do the Sys Call as we normally would.
 	; Validate the Sys Call number
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
 
@@ -255,7 +255,7 @@ ENTRY(EV_Trap)
 	;============ Normal syscall case
 
 	; syscall num shd not exceed the total system calls avail
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
diff --git linux-libre-5.12-gnu/arch/arc/mm/init.c linux-libre-5.12.8-gnu/arch/arc/mm/init.c
index ce07e697916c..1bcc6985b9a0 100644
--- linux-libre-5.12-gnu/arch/arc/mm/init.c
+++ linux-libre-5.12.8-gnu/arch/arc/mm/init.c
@@ -157,7 +157,16 @@ void __init setup_arch_memory(void)
 	min_high_pfn = PFN_DOWN(high_mem_start);
 	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-	max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+	/*
+	 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+	 * For HIGHMEM without PAE max_high_pfn should be less than
+	 * min_low_pfn to guarantee that these two regions don't overlap.
+	 * For PAE case highmem is greater than lowmem, so it is natural
+	 * to use max_high_pfn.
+	 *
+	 * In both cases, holes should be handled by pfn_valid().
+	 */
+	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
 
diff --git linux-libre-5.12-gnu/arch/arc/mm/ioremap.c linux-libre-5.12.8-gnu/arch/arc/mm/ioremap.c
index fac4adc90204..95c649fbc95a 100644
--- linux-libre-5.12-gnu/arch/arc/mm/ioremap.c
+++ linux-libre-5.12.8-gnu/arch/arc/mm/ioremap.c
@@ -53,9 +53,10 @@ EXPORT_SYMBOL(ioremap);
 void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 			   unsigned long flags)
 {
+	unsigned int off;
 	unsigned long vaddr;
 	struct vm_struct *area;
-	phys_addr_t off, end;
+	phys_addr_t end;
 	pgprot_t prot = __pgprot(flags);
 
 	/* Don't allow wraparound, zero size */
@@ -72,7 +73,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 
 	/* Mappings have to be page-aligned */
 	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK;
+	paddr &= PAGE_MASK_PHYS;
 	size = PAGE_ALIGN(end + 1) - paddr;
 
 	/*
diff --git linux-libre-5.12-gnu/arch/arc/mm/tlb.c linux-libre-5.12.8-gnu/arch/arc/mm/tlb.c
index 9bb3c24f3677..9c7c68247289 100644
--- linux-libre-5.12-gnu/arch/arc/mm/tlb.c
+++ linux-libre-5.12.8-gnu/arch/arc/mm/tlb.c
@@ -576,7 +576,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 		      pte_t *ptep)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
-	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
 	struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 	create_tlb(vma, vaddr, ptep);
diff --git linux-libre-5.12-gnu/arch/arm/boot/compressed/Makefile linux-libre-5.12.8-gnu/arch/arm/boot/compressed/Makefile
index fd94e27ba4fa..c1f804768621 100644
--- linux-libre-5.12-gnu/arch/arm/boot/compressed/Makefile
+++ linux-libre-5.12.8-gnu/arch/arm/boot/compressed/Makefile
@@ -118,8 +118,8 @@ asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
-		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6c9804d2f3b4..6df1ce545061 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -713,9 +713,9 @@
 	multi-master;
 	status = "okay";
 
-	si7021-a20@20 {
+	si7021-a20@40 {
 		compatible = "silabs,si7020";
-		reg = <0x20>;
+		reg = <0x40>;
 	};
 
 	tmp275@48 {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
index 775ceb3acb6c..edca66c232c1 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAM9X60-EK";
@@ -84,7 +85,7 @@
 		sw1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<0x104>;
+			linux,code=<KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 84e1180f3e89..a9e6fee55a2a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -11,6 +11,7 @@
 #include "at91-sama5d27_som1.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D27 SOM1 EK";
@@ -466,7 +467,7 @@
 		pb4 {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 180a08765cb8..ff83967fd008 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -35,7 +36,7 @@
 		sw4 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 46722a163184..bd64721fa23c 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -12,6 +12,7 @@
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -51,7 +52,7 @@
 		sw4 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8de57d164acd..dfd150eb0fd8 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -402,7 +403,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 4e7cf21f124c..509c732a0d8b 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -10,6 +10,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
@@ -712,7 +713,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 5179258f9247..9c55a921263b 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -354,7 +355,7 @@
 		bp3 {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9260ek.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91sam9260ek.dts
index d3446e42b598..ce96345d28a3 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9260ek.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91sam9260ek.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel at91sam9260ek";
@@ -156,7 +157,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 6e6e672c0b86..87bb39060e8b 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -5,6 +5,7 @@
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -234,7 +235,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 6a96655d8626..8ed403767540 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3b0029e61b4c..667b118ba4ee 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 90f57bad6b24..ff31ce45831a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index fed75e6ab58c..61c7b137607e 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -22,8 +22,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 79542e18915c..4c60eda296d9 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 51c64f0b2560..9ca6d1b2590d 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index c29950b43a95..0e273c598732 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 2f2d2b0a6893..d857751ec507 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 0e349e39f608..8b1a05a0f1a1 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 8f1e565c3db4..6c6bb7b17d27 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -21,8 +21,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index ce888b1835d1..d29e7f80ea6a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -21,8 +21,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index ed8619b54d69..38fbefdf2e4e 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -18,8 +18,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 1f87993eae1d..7989a53597d4 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -21,8 +21,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 6c6199a53d09..87b655be674c 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -32,8 +32,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 911c65fbf251..e635a15041dd 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	nand: nand@18028000 {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 3725f2b0d60b..4b24b25389b5 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 50f7cd08cfbb..a6dc99955e19 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index bcc420f85b56..ff98837bc0db 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 4f8d777ae18d..452b8d0ab180 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -18,8 +18,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index e17e9a17fb00..b76bfe6efcd4 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 60cc87ecc7ec..32d5a50578ec 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index f42a1703f4ab..42097a4c2659 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
index ac3a4483dcb3..a2566ad4619c 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -15,8 +15,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/dra7-l4.dtsi
index 3bf90d9e3335..a294a02f2d23 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1168,7 +1168,7 @@
 			};
 		};
 
-		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
@@ -1195,7 +1195,7 @@
 			};
 		};
 
-		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/dra7.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/dra7.dtsi
index ce1194744f84..53d68786a61f 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/dra7.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1241,3 +1242,22 @@
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer3_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer4_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
index 304a8ee2364c..d98c78207aaf 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -136,7 +136,7 @@
 			compatible = "maxim,max17042";
 
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-0 = <&max17042_fuel_irq>;
 			pinctrl-names = "default";
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
index 111c32bae02c..fc77c1bfd844 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -173,7 +173,7 @@
 		pmic@66 {
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
@@ -221,7 +221,7 @@
 		fuel-gauge@36 {
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_fuel_irq>;
 			reg = <0x36>;
@@ -665,7 +665,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2b20d9095d9f..eebe6a3952ce 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -278,7 +278,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		reg = <0x09>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi
index b2f9d5448a18..9e750890edb8 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -146,7 +146,7 @@
 			pinctrl-0 = <&fuel_alert_irq>;
 			pinctrl-names = "default";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			maxim,rsns-microohm = <10000>;
 			maxim,over-heat-temp = <600>;
 			maxim,over-volt = <4300>;
@@ -322,7 +322,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 8b5a79a8720c..39bbe18145cf 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -134,7 +134,7 @@
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		#clock-cells = <1>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 6635f6184051..2335c4687349 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -292,7 +292,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 0cda654371ae..56ee02ceba7d 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -575,7 +575,7 @@
 			maxim,rcomp = /bits/ 8 <0x4d>;
 
 			interrupt-parent = <&msmgpio>;
-			interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&fuelgauge_pin>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index a0f7f461f48c..2dadb836c5fe 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -717,7 +717,7 @@
 			maxim,rcomp = /bits/ 8 <0x56>;
 
 			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&fuelgauge_pin>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7790-lager.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7790-lager.dts
index 09a152b91557..1d6f0c5d02e9 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7790-lager.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7790-lager.dts
@@ -53,6 +53,9 @@
 		i2c11 = &i2cexio1;
 		i2c12 = &i2chdmi;
 		i2c13 = &i2cpwr;
+		mmc0 = &mmcif1;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
index f603cba5441f..6af1727b8269 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -53,6 +53,9 @@
 		i2c12 = &i2cexio1;
 		i2c13 = &i2chdmi;
 		i2c14 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-porter.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7791-porter.dts
index c6d563fb7ec7..bf51e29c793a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-porter.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7791-porter.dts
@@ -28,6 +28,8 @@
 		serial0 = &scif0;
 		i2c9 = &gpioi2c2;
 		i2c10 = &i2chdmi;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7793-gose.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7793-gose.dts
index abf487e8fe0f..2b59a0491350 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7793-gose.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7793-gose.dts
@@ -49,6 +49,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-alt.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7794-alt.dts
index 3f1cc5bbf329..32025986b3b9 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-alt.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7794-alt.dts
@@ -19,6 +19,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-silk.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7794-silk.dts
index 677596f6c9c9..af066ee5e275 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-silk.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/r8a7794-silk.dts
@@ -31,6 +31,8 @@
 		serial0 = &scif2;
 		i2c9 = &gpioi2c1;
 		i2c10 = &i2chdmi;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ca064359dd30..b47d8300e536 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -115,7 +115,7 @@
 	compatible = "maxim,max77836-battery";
 
 	interrupt-parent = <&gph3>;
-	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&fg_irq>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index cb3677f0a1cb..b580397ede83 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -8,37 +8,43 @@
 / {
 	soc {
 		i2c@80128000 {
-			/* Marked:
-			 * 129
-			 * M35
-			 * L3GD20
-			 */
-			l3gd20@6a {
-				/* Gyroscope */
-				compatible = "st,l3gd20";
-				status = "disabled";
+			accelerometer@19 {
+				compatible = "st,lsm303dlhc-accel";
 				st,drdy-int-pin = <1>;
-				drive-open-drain;
-				reg = <0x6a>; // 0x6a or 0x6b
+				reg = <0x19>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
 			};
-			/*
-			 * Marked:
-			 * 2122
-			 * C3H
-			 * DQEEE
-			 * LIS3DH?
-			 */
-			lis3dh@18 {
-				/* Accelerometer */
-				compatible = "st,lis3dh-accel";
+			magnetometer@1e {
+				compatible = "st,lsm303dlm-magn";
 				st,drdy-int-pin = <1>;
-				reg = <0x18>;
+				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				// This interrupt is not properly working with the driver
+				// interrupt-parent = <&gpio1>;
+				// interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
+				pinctrl-0 = <&magn_tvk_mode>;
+			};
+			gyroscope@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			pressure@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
 			};
 		};
 
@@ -54,5 +60,26 @@
 				};
 			};
 		};
+
+		pinctrl {
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			magnetometer {
+				magn_tvk_mode: magn_tvk {
+					/* GPIO 32 used for DRDY, pull this down */
+					tvk_cfg {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7b4249ed1983..060baa8b7e9d 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1891,10 +1891,15 @@
 	usart2_idle_pins_c: usart2-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
 				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
 			bias-disable;
 		};
@@ -1940,10 +1945,15 @@
 	usart3_idle_pins_b: usart3-idle-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
@@ -1976,10 +1986,15 @@
 	usart3_idle_pins_c: usart3-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts linux-libre-5.12.8-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index d3b99535d755..f9c0f6884cc1 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -448,7 +448,7 @@
 
 			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
 
-			avdd-supply = <&vdd_3v3_sys>;
+			vdda-supply = <&vdd_3v3_sys>;
 			vdd-supply  = <&vdd_3v3_sys>;
 		};
 
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi linux-libre-5.12.8-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
index b0b15c97306b..e81e5937a60a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -583,7 +583,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
diff --git linux-libre-5.12-gnu/arch/arm/crypto/blake2s-core.S linux-libre-5.12.8-gnu/arch/arm/crypto/blake2s-core.S
index bed897e9a181..86345751bbf3 100644
--- linux-libre-5.12-gnu/arch/arm/crypto/blake2s-core.S
+++ linux-libre-5.12.8-gnu/arch/arm/crypto/blake2s-core.S
@@ -8,6 +8,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 	// Registers used to hold message words temporarily.  There aren't
 	// enough ARM registers to hold the whole message block, so we have to
@@ -38,6 +39,23 @@
 #endif
 .endm
 
+.macro _le32_bswap	a, tmp
+#ifdef __ARMEB__
+	rev_l		\a, \tmp
+#endif
+.endm
+
+.macro _le32_bswap_8x	a, b, c, d, e, f, g, h,  tmp
+	_le32_bswap	\a, \tmp
+	_le32_bswap	\b, \tmp
+	_le32_bswap	\c, \tmp
+	_le32_bswap	\d, \tmp
+	_le32_bswap	\e, \tmp
+	_le32_bswap	\f, \tmp
+	_le32_bswap	\g, \tmp
+	_le32_bswap	\h, \tmp
+.endm
+
 // Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals.
 // (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two
 // columns/diagonals.  s0-s1 are the word offsets to the message words the first
@@ -180,8 +198,10 @@ ENTRY(blake2s_compress_arch)
 	tst		r1, #3
 	bne		.Lcopy_block_misaligned
 	ldmia		r1!, {r2-r9}
+	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
 	stmia		r12!, {r2-r9}
 	ldmia		r1!, {r2-r9}
+	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
 	stmia		r12, {r2-r9}
 .Lcopy_block_done:
 	str		r1, [sp, #68]		// Update message pointer
@@ -268,6 +288,7 @@ ENTRY(blake2s_compress_arch)
 1:
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	ldr		r3, [r1], #4
+	_le32_bswap	r3, r4
 #else
 	ldrb		r3, [r1, #0]
 	ldrb		r4, [r1, #1]
diff --git linux-libre-5.12-gnu/arch/arm/crypto/curve25519-core.S linux-libre-5.12.8-gnu/arch/arm/crypto/curve25519-core.S
index be18af52e7dc..b697fa5d059a 100644
--- linux-libre-5.12-gnu/arch/arm/crypto/curve25519-core.S
+++ linux-libre-5.12.8-gnu/arch/arm/crypto/curve25519-core.S
@@ -10,8 +10,8 @@
 #include <linux/linkage.h>
 
 .text
-.fpu neon
 .arch armv7-a
+.fpu neon
 .align 4
 
 ENTRY(curve25519_neon)
diff --git linux-libre-5.12-gnu/arch/arm/crypto/poly1305-glue.c linux-libre-5.12.8-gnu/arch/arm/crypto/poly1305-glue.c
index 3023c1acfa19..c31bd8f7c092 100644
--- linux-libre-5.12-gnu/arch/arm/crypto/poly1305-glue.c
+++ linux-libre-5.12.8-gnu/arch/arm/crypto/poly1305-glue.c
@@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
 
 static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
 
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
 {
 	poly1305_init_arm(&dctx->h, key);
 	dctx->s[0] = get_unaligned_le32(key + 16);
diff --git linux-libre-5.12-gnu/arch/arm/kernel/asm-offsets.c linux-libre-5.12.8-gnu/arch/arm/kernel/asm-offsets.c
index be8050b0c3df..70993af22d80 100644
--- linux-libre-5.12-gnu/arch/arm/kernel/asm-offsets.c
+++ linux-libre-5.12.8-gnu/arch/arm/kernel/asm-offsets.c
@@ -24,6 +24,7 @@
 #include <asm/vdso_datapage.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
 #include "signal.h"
 
 /*
@@ -148,6 +149,8 @@ int main(void)
   DEFINE(SLEEP_SAVE_SP_PHYS,	offsetof(struct sleep_save_sp, save_ptr_stash_phys));
   DEFINE(SLEEP_SAVE_SP_VIRT,	offsetof(struct sleep_save_sp, save_ptr_stash));
 #endif
+  DEFINE(ARM_SMCCC_QUIRK_ID_OFFS,	offsetof(struct arm_smccc_quirk, id));
+  DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS,	offsetof(struct arm_smccc_quirk, state));
   BLANK();
   DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
   DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
diff --git linux-libre-5.12-gnu/arch/arm/kernel/hw_breakpoint.c linux-libre-5.12.8-gnu/arch/arm/kernel/hw_breakpoint.c
index 08660ae9dcbc..b1423fb130ea 100644
--- linux-libre-5.12-gnu/arch/arm/kernel/hw_breakpoint.c
+++ linux-libre-5.12.8-gnu/arch/arm/kernel/hw_breakpoint.c
@@ -886,7 +886,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 			info->trigger = addr;
 			pr_debug("breakpoint fired: address = 0x%x\n", addr);
 			perf_bp_event(bp, regs);
-			if (!bp->overflow_handler)
+			if (is_default_overflow_handler(bp))
 				enable_single_step(bp, addr);
 			goto unlock;
 		}
diff --git linux-libre-5.12-gnu/arch/arm/kernel/smccc-call.S linux-libre-5.12.8-gnu/arch/arm/kernel/smccc-call.S
index 00664c78faca..931df62a7831 100644
--- linux-libre-5.12-gnu/arch/arm/kernel/smccc-call.S
+++ linux-libre-5.12.8-gnu/arch/arm/kernel/smccc-call.S
@@ -3,7 +3,9 @@
  * Copyright (c) 2015, Linaro Limited
  */
 #include <linux/linkage.h>
+#include <linux/arm-smccc.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/unwind.h>
@@ -27,7 +29,14 @@ UNWIND(	.fnstart)
 UNWIND(	.save	{r4-r7})
 	ldm	r12, {r4-r7}
 	\instr
-	pop	{r4-r7}
+	ldr	r4, [sp, #36]
+	cmp	r4, #0
+	beq	1f			// No quirk structure
+	ldr     r5, [r4, #ARM_SMCCC_QUIRK_ID_OFFS]
+	cmp     r5, #ARM_SMCCC_QUIRK_QCOM_A6
+	bne	1f			// No quirk present
+	str	r6, [r4, #ARM_SMCCC_QUIRK_STATE_OFFS]
+1:	pop	{r4-r7}
 	ldr	r12, [sp, #(4 * 4)]
 	stm	r12, {r0-r3}
 	bx	lr
diff --git linux-libre-5.12-gnu/arch/arm/kernel/suspend.c linux-libre-5.12.8-gnu/arch/arm/kernel/suspend.c
index 24bd20564be7..43f0a3ebf390 100644
--- linux-libre-5.12-gnu/arch/arm/kernel/suspend.c
+++ linux-libre-5.12.8-gnu/arch/arm/kernel/suspend.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/ftrace.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mm_types.h>
@@ -25,6 +26,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	if (!idmap_pgd)
 		return -EINVAL;
 
+	/*
+	 * Function graph tracer state gets incosistent when the kernel
+	 * calls functions that never return (aka suspend finishers) hence
+	 * disable graph tracing during their execution.
+	 */
+	pause_graph_tracing();
+
 	/*
 	 * Provide a temporary page table with an identity mapping for
 	 * the MMU-enable code, required for resuming.  On successful
@@ -32,6 +40,9 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	 * back to the correct page tables.
 	 */
 	ret = __cpu_suspend(arg, fn, __mpidr);
+
+	unpause_graph_tracing();
+
 	if (ret == 0) {
 		cpu_switch_mm(mm->pgd, mm);
 		local_flush_bp_all();
@@ -45,7 +56,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
 	u32 __mpidr = cpu_logical_map(smp_processor_id());
-	return __cpu_suspend(arg, fn, __mpidr);
+	int ret;
+
+	pause_graph_tracing();
+	ret = __cpu_suspend(arg, fn, __mpidr);
+	unpause_graph_tracing();
+
+	return ret;
 }
 #define	idmap_pgd	NULL
 #endif
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 6e4ad66ff536..8d5d368dbe90 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -65,6 +65,7 @@
 	port@7 {
 		label = "sw";
 		reg = <7>;
+		phy-mode = "rgmii";
 
 		fixed-link {
 			speed = <1000>;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 9354077f74cd..9e799328c6db 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -131,7 +131,7 @@
 			status = "disabled";
 		};
 
-		ethernet-switch@80000 {
+		bus@80000 {
 			compatible = "simple-bus";
 			#size-cells = <1>;
 			#address-cells = <1>;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 0d38327043f8..cd3c3edd48fa 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -28,6 +28,10 @@
 	ti,termination-current = <144000>;  /* uA */
 };
 
+&buck3_reg {
+	regulator-always-on;
+};
+
 &proximity {
 	proximity-near-level = <25>;
 };
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 7a2df148c6a3..456dcd4a7793 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -156,7 +156,8 @@
 			};
 
 			nb_periph_clk: nb-periph-clk@13000 {
-				compatible = "marvell,armada-3700-periph-clock-nb";
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
 				reg = <0x13000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 				<&tbg 3>, <&xtalclk>;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 6dffada2e66b..28aa634c9780 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -294,7 +294,7 @@
 
 &pwrap {
 	/* Only MT8173 E1 needs USB power domain */
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+	power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
 
 	pmic: mt6397 {
 		compatible = "mediatek,mt6397";
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 7fa870e4386a..ecb37a7e6870 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1235,7 +1235,7 @@
 				 <&mmsys CLK_MM_DSI1_DIGITAL>,
 				 <&mipi_tx1>;
 			clock-names = "engine", "digital", "hs";
-			phy = <&mipi_tx1>;
+			phys = <&mipi_tx1>;
 			phy-names = "dphy";
 			status = "disabled";
 		};
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 80519a145f13..16f4b1fc0fb9 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -983,6 +983,9 @@
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
 		ovl0: ovl@14008000 {
@@ -1058,6 +1061,7 @@
 			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
 		aal0: aal@14010000 {
@@ -1067,6 +1071,7 @@
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
 		gamma0: gamma@14011000 {
@@ -1075,6 +1080,7 @@
 			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
 		dither0: dither@14012000 {
@@ -1083,6 +1089,7 @@
 			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
 		dsi0: dsi@14014000 {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 63fd70086bb8..9f27e7ed5e22 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -56,7 +56,7 @@
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 2dcc445f6d46..30a795653ecb 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -22,9 +22,11 @@
 			thermal-sensors = <&pm6150_adc_tm 1>;
 
 			trips {
-				temperature = <125000>;
-				hysteresis = <1000>;
-				type = "critical";
+				charger-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
@@ -768,17 +770,17 @@ hp_i2c: &i2c9 {
 };
 
 &spi0 {
-	pinctrl-0 = <&qup_spi0_cs_gpio>;
+	pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
 	cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 };
 
 &spi6 {
-	pinctrl-0 = <&qup_spi6_cs_gpio>;
+	pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
 	cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 };
 
 ap_spi_fp: &spi10 {
-	pinctrl-0 = <&qup_spi10_cs_gpio>;
+	pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
 	cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
 
 	cros_ec_fp: ec@0 {
@@ -1339,6 +1341,27 @@ ap_spi_fp: &spi10 {
 		};
 	};
 
+	qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
+		pinconf {
+			pins = "gpio37";
+			output-high;
+		};
+	};
+
+	qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
+		pinconf {
+			pins = "gpio62";
+			output-high;
+		};
+	};
+
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+		pinconf {
+			pins = "gpio89";
+			output-high;
+		};
+	};
+
 	qup_uart3_sleep: qup-uart3-sleep {
 		pinmux {
 			pins = "gpio38", "gpio39",
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index e614b7830722..c8537bc5d1cb 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1015,7 +1015,7 @@
 		left_spkr: wsa8810-left{
 			compatible = "sdw10217201000";
 			reg = <0 1>;
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -1023,7 +1023,7 @@
 
 		right_spkr: wsa8810-right{
 			compatible = "sdw10217201000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			reg = <0 2>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 454f794af547..6a2ed02d383d 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2382,7 +2382,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 150>;
+			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc_intc>;
 
 			cci0_default: cci0-default {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e5bb17bc2f46..778613d3410b 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -914,7 +914,7 @@
 			      <0x0 0x03D00000 0x0 0x300000>;
 			reg-names = "west", "east", "north", "south";
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&tlmm 0 0 175>;
+			gpio-ranges = <&tlmm 0 0 176>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..46a6c18cea91 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -279,7 +279,7 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -2327,10 +2327,9 @@
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-					<&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
 					<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-			interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+			interconnect-names = "mdp0-mem", "mdp1-mem";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -2580,7 +2579,7 @@
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm8250-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0 0x0af00000 0 0x10000>;
 			mmcx-supply = <&mmcx_reg>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <&sleep_clk>;
+				 <0>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
 				      "dsi1_phy_pll_out_byteclk",
 				      "dsi1_phy_pll_out_dsiclk",
-				      "dp_link_clk_divsel_ten",
-				      "dp_vco_divided_clk_src_mux",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
-				      "dptx2_phy_pll_link_clk",
-				      "dptx2_phy_pll_vco_div_clk",
-				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk",
-				      "sleep_clk";
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2689,7 +2674,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 180>;
+			gpio-ranges = <&tlmm 0 0 181>;
 			wakeup-parent = <&pdc>;
 
 			pri_mi2s_active: pri-mi2s-active {
@@ -3754,7 +3739,7 @@
 				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
 				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12
+			     <GIC_PPI 10
 				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 5ef460458f5c..e2fca420e518 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -153,7 +153,7 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -382,7 +382,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 203>;
+			gpio-ranges = <&tlmm 0 0 204>;
 
 			qup_uart3_default_state: qup-uart3-default-state {
 				rx {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 7a3da9b06f67..0c7e6f790590 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -12,6 +12,9 @@
 	aliases {
 		serial0 = &scif2;
 		serial1 = &hscif0;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
index 501cb05da228..3cf2e076940f 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -21,6 +21,9 @@
 		serial4 = &hscif2;
 		serial5 = &scif5;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
index 71763f4402a7..3c0d59def8ee 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
@@ -22,6 +22,9 @@
 		serial5 = &scif5;
 		serial6 = &scif4;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index ea87cb5a459c..33257c6440b2 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -17,6 +17,8 @@
 	aliases {
 		serial0 = &scif2;
 		serial1 = &hscif2;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi3;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
index 273f062f2909..7b6649a3ded0 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
@@ -22,6 +22,9 @@
 		serial5 = &scif5;
 		serial6 = &scif4;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index ec7ca72399ec..1ffa4a995a7a 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -992,8 +992,8 @@
 
 					reg = <1>;
 
-					vin4csi41: endpoint@2 {
-						reg = <2>;
+					vin4csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin4>;
 					};
 				};
@@ -1020,8 +1020,8 @@
 
 					reg = <1>;
 
-					vin5csi41: endpoint@2 {
-						reg = <2>;
+					vin5csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin5>;
 					};
 				};
@@ -1048,8 +1048,8 @@
 
 					reg = <1>;
 
-					vin6csi41: endpoint@2 {
-						reg = <2>;
+					vin6csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin6>;
 					};
 				};
@@ -1076,8 +1076,8 @@
 
 					reg = <1>;
 
-					vin7csi41: endpoint@2 {
-						reg = <2>;
+					vin7csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin7>;
 					};
 				};
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index f74f8b9993f1..6d6cdc4c324b 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -16,6 +16,9 @@
 	aliases {
 		serial0 = &scif2;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index fa284a7260d6..e202e8aa6941 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -12,6 +12,14 @@
 	model = "Renesas Falcon CPU board";
 	compatible = "renesas,falcon-cpu", "renesas,r8a779a0";
 
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index 5617b81dd7dc..273857ae38f3 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -14,11 +14,6 @@
 
 	aliases {
 		ethernet0 = &avb0;
-		serial0 = &scif0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index dfd6ae8b564f..86ac48e2c849 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -60,10 +60,7 @@
 
 	pmu_a76 {
 		compatible = "arm,cortex-a76-pmu";
-		interrupts-extended = <&gic GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/* External SCIF clock - to be overridden by boards that provide it */
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index c22bb38994e8..15bb1eeb6601 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -36,6 +36,9 @@
 		serial0 = &scif2;
 		serial1 = &hscif1;
 		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi3;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index e9ed2597f1c2..61bd4df09df0 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -16,6 +16,7 @@
 	aliases {
 		serial1 = &hscif0;
 		serial2 = &scif1;
+		mmc2 = &sdhi3;
 	};
 
 	clksndsel: clksndsel {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
index a04eae55dd6c..3d88e95c65a5 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -23,6 +23,8 @@
 	aliases {
 		serial0 = &scif2;
 		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a87b8a678719..8f2c1c1e2c64 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -734,7 +734,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 0e52dadf54b3..be97da132258 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -564,7 +564,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
@@ -585,7 +585,7 @@
 			clocks = <&sys_clk 7>;
 			reset-names = "ether";
 			resets = <&sys_rst 7>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 1>;
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-5.12.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 8c84dafb7125..f1e7da3dfa27 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-5.12.8-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1042,13 +1042,16 @@
 		assigned-clocks = <&k3_clks 91 1>;
 		assigned-clock-parents = <&k3_clks 91 2>;
 		bus-width = <8>;
-		mmc-hs400-1_8v;
+		mmc-hs200-1_8v;
 		mmc-ddr-1_8v;
 		ti,otap-del-sel-legacy = <0xf>;
 		ti,otap-del-sel-mmc-hs = <0xf>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x6>;
 		ti,otap-del-sel-hs400 = <0x0>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,trm-icp = <0x8>;
 		ti,strobe-sel = <0x77>;
 		dma-coherent;
@@ -1069,9 +1072,15 @@
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
 	};
 
 	main_sdhci2: mmc@4f98000 {
@@ -1089,9 +1098,15 @@
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
 	};
 
 	usbss0: cdns-usb@4104000 {
diff --git linux-libre-5.12-gnu/arch/arm64/crypto/aes-modes.S linux-libre-5.12.8-gnu/arch/arm64/crypto/aes-modes.S
index bbdb54702aa7..247011356d11 100644
--- linux-libre-5.12-gnu/arch/arm64/crypto/aes-modes.S
+++ linux-libre-5.12.8-gnu/arch/arm64/crypto/aes-modes.S
@@ -359,6 +359,7 @@ ST5(	mov		v4.16b, vctr.16b		)
 	ins		vctr.d[0], x8
 
 	/* apply carry to N counter blocks for N := x12 */
+	cbz		x12, 2f
 	adr		x16, 1f
 	sub		x16, x16, x12, lsl #3
 	br		x16
diff --git linux-libre-5.12-gnu/arch/arm64/crypto/poly1305-glue.c linux-libre-5.12.8-gnu/arch/arm64/crypto/poly1305-glue.c
index 683de671741a..9c3d86e397bf 100644
--- linux-libre-5.12-gnu/arch/arm64/crypto/poly1305-glue.c
+++ linux-libre-5.12.8-gnu/arch/arm64/crypto/poly1305-glue.c
@@ -25,7 +25,7 @@ asmlinkage void poly1305_emit(void *state, u8 *digest, const u32 *nonce);
 
 static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
 
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
 {
 	poly1305_init_arm64(&dctx->h, key);
 	dctx->s[0] = get_unaligned_le32(key + 16);
diff --git linux-libre-5.12-gnu/arch/arm64/include/asm/daifflags.h linux-libre-5.12.8-gnu/arch/arm64/include/asm/daifflags.h
index 1c26d7baa67f..cfdde3a56805 100644
--- linux-libre-5.12-gnu/arch/arm64/include/asm/daifflags.h
+++ linux-libre-5.12.8-gnu/arch/arm64/include/asm/daifflags.h
@@ -131,6 +131,9 @@ static inline void local_daif_inherit(struct pt_regs *regs)
 	if (interrupts_enabled(regs))
 		trace_hardirqs_on();
 
+	if (system_uses_irq_prio_masking())
+		gic_write_pmr(regs->pmr_save);
+
 	/*
 	 * We can't use local_daif_restore(regs->pstate) here as
 	 * system_has_prio_mask_debugging() won't restore the I bit if it can
diff --git linux-libre-5.12-gnu/arch/arm64/include/asm/kvm_host.h linux-libre-5.12.8-gnu/arch/arm64/include/asm/kvm_host.h
index 3d10e6527f7d..858c2fcfc043 100644
--- linux-libre-5.12-gnu/arch/arm64/include/asm/kvm_host.h
+++ linux-libre-5.12.8-gnu/arch/arm64/include/asm/kvm_host.h
@@ -713,6 +713,7 @@ static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {}
 
 void kvm_arm_init_debug(void);
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
diff --git linux-libre-5.12-gnu/arch/arm64/kernel/entry-common.c linux-libre-5.12.8-gnu/arch/arm64/kernel/entry-common.c
index 9d3588450473..117412bae915 100644
--- linux-libre-5.12-gnu/arch/arm64/kernel/entry-common.c
+++ linux-libre-5.12.8-gnu/arch/arm64/kernel/entry-common.c
@@ -226,14 +226,6 @@ static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long far = read_sysreg(far_el1);
 
-	/*
-	 * The CPU masked interrupts, and we are leaving them masked during
-	 * do_debug_exception(). Update PMR as if we had called
-	 * local_daif_mask().
-	 */
-	if (system_uses_irq_prio_masking())
-		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
 	arm64_enter_el1_dbg(regs);
 	if (!cortex_a76_erratum_1463225_debug_handler(regs))
 		do_debug_exception(far, esr, regs);
@@ -398,9 +390,6 @@ static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr)
 	/* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */
 	unsigned long far = read_sysreg(far_el1);
 
-	if (system_uses_irq_prio_masking())
-		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
 	enter_from_user_mode();
 	do_debug_exception(far, esr, regs);
 	local_daif_restore(DAIF_PROCCTX_NOIRQ);
@@ -408,9 +397,6 @@ static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr)
 
 static void noinstr el0_svc(struct pt_regs *regs)
 {
-	if (system_uses_irq_prio_masking())
-		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
 	enter_from_user_mode();
 	cortex_a76_erratum_1463225_svc_handler();
 	do_el0_svc(regs);
@@ -486,9 +472,6 @@ static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr)
 
 static void noinstr el0_svc_compat(struct pt_regs *regs)
 {
-	if (system_uses_irq_prio_masking())
-		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
 	enter_from_user_mode();
 	cortex_a76_erratum_1463225_svc_handler();
 	do_el0_svc_compat(regs);
diff --git linux-libre-5.12-gnu/arch/arm64/kernel/entry.S linux-libre-5.12.8-gnu/arch/arm64/kernel/entry.S
index 6acfc5e6b5e0..e03fba3ae2a0 100644
--- linux-libre-5.12-gnu/arch/arm64/kernel/entry.S
+++ linux-libre-5.12.8-gnu/arch/arm64/kernel/entry.S
@@ -263,16 +263,16 @@ alternative_else_nop_endif
 	stp	lr, x21, [sp, #S_LR]
 
 	/*
-	 * For exceptions from EL0, terminate the callchain here.
+	 * For exceptions from EL0, create a terminal frame record.
 	 * For exceptions from EL1, create a synthetic frame record so the
 	 * interrupted code shows up in the backtrace.
 	 */
 	.if \el == 0
-	mov	x29, xzr
+	stp	xzr, xzr, [sp, #S_STACKFRAME]
 	.else
 	stp	x29, x22, [sp, #S_STACKFRAME]
-	add	x29, sp, #S_STACKFRAME
 	.endif
+	add	x29, sp, #S_STACKFRAME
 
 #ifdef CONFIG_ARM64_SW_TTBR0_PAN
 alternative_if_not ARM64_HAS_PAN
@@ -292,6 +292,8 @@ alternative_else_nop_endif
 alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	mrs_s	x20, SYS_ICC_PMR_EL1
 	str	x20, [sp, #S_PMR_SAVE]
+	mov	x20, #GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET
+	msr_s	SYS_ICC_PMR_EL1, x20
 alternative_else_nop_endif
 
 	/* Re-enable tag checking (TCO set on exception entry) */
@@ -493,8 +495,8 @@ tsk	.req	x28		// current thread_info
 /*
  * Interrupt handling.
  */
-	.macro	irq_handler
-	ldr_l	x1, handle_arch_irq
+	.macro	irq_handler, handler:req
+	ldr_l	x1, \handler
 	mov	x0, sp
 	irq_stack_entry
 	blr	x1
@@ -524,13 +526,41 @@ alternative_endif
 #endif
 	.endm
 
-	.macro	gic_prio_irq_setup, pmr:req, tmp:req
-#ifdef CONFIG_ARM64_PSEUDO_NMI
-	alternative_if ARM64_HAS_IRQ_PRIO_MASKING
-	orr	\tmp, \pmr, #GIC_PRIO_PSR_I_SET
-	msr_s	SYS_ICC_PMR_EL1, \tmp
-	alternative_else_nop_endif
+	.macro el1_interrupt_handler, handler:req
+	enable_da_f
+
+	mov	x0, sp
+	bl	enter_el1_irq_or_nmi
+
+	irq_handler	\handler
+
+#ifdef CONFIG_PREEMPTION
+	ldr	x24, [tsk, #TSK_TI_PREEMPT]	// get preempt count
+alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+	/*
+	 * DA_F were cleared at start of handling. If anything is set in DAIF,
+	 * we come back from an NMI, so skip preemption
+	 */
+	mrs	x0, daif
+	orr	x24, x24, x0
+alternative_else_nop_endif
+	cbnz	x24, 1f				// preempt count != 0 || NMI return path
+	bl	arm64_preempt_schedule_irq	// irq en/disable is done inside
+1:
 #endif
+
+	mov	x0, sp
+	bl	exit_el1_irq_or_nmi
+	.endm
+
+	.macro el0_interrupt_handler, handler:req
+	user_exit_irqoff
+	enable_da_f
+
+	tbz	x22, #55, 1f
+	bl	do_el0_irq_bp_hardening
+1:
+	irq_handler	\handler
 	.endm
 
 	.text
@@ -662,32 +692,7 @@ SYM_CODE_END(el1_sync)
 	.align	6
 SYM_CODE_START_LOCAL_NOALIGN(el1_irq)
 	kernel_entry 1
-	gic_prio_irq_setup pmr=x20, tmp=x1
-	enable_da_f
-
-	mov	x0, sp
-	bl	enter_el1_irq_or_nmi
-
-	irq_handler
-
-#ifdef CONFIG_PREEMPTION
-	ldr	x24, [tsk, #TSK_TI_PREEMPT]	// get preempt count
-alternative_if ARM64_HAS_IRQ_PRIO_MASKING
-	/*
-	 * DA_F were cleared at start of handling. If anything is set in DAIF,
-	 * we come back from an NMI, so skip preemption
-	 */
-	mrs	x0, daif
-	orr	x24, x24, x0
-alternative_else_nop_endif
-	cbnz	x24, 1f				// preempt count != 0 || NMI return path
-	bl	arm64_preempt_schedule_irq	// irq en/disable is done inside
-1:
-#endif
-
-	mov	x0, sp
-	bl	exit_el1_irq_or_nmi
-
+	el1_interrupt_handler handle_arch_irq
 	kernel_exit 1
 SYM_CODE_END(el1_irq)
 
@@ -727,22 +732,13 @@ SYM_CODE_END(el0_error_compat)
 SYM_CODE_START_LOCAL_NOALIGN(el0_irq)
 	kernel_entry 0
 el0_irq_naked:
-	gic_prio_irq_setup pmr=x20, tmp=x0
-	user_exit_irqoff
-	enable_da_f
-
-	tbz	x22, #55, 1f
-	bl	do_el0_irq_bp_hardening
-1:
-	irq_handler
-
+	el0_interrupt_handler handle_arch_irq
 	b	ret_to_user
 SYM_CODE_END(el0_irq)
 
 SYM_CODE_START_LOCAL(el1_error)
 	kernel_entry 1
 	mrs	x1, esr_el1
-	gic_prio_kentry_setup tmp=x2
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
@@ -753,7 +749,6 @@ SYM_CODE_START_LOCAL(el0_error)
 	kernel_entry 0
 el0_error_naked:
 	mrs	x25, esr_el1
-	gic_prio_kentry_setup tmp=x2
 	user_exit_irqoff
 	enable_dbg
 	mov	x0, sp
diff --git linux-libre-5.12-gnu/arch/arm64/kernel/stacktrace.c linux-libre-5.12.8-gnu/arch/arm64/kernel/stacktrace.c
index d55bdfb7789c..7032a5f9e624 100644
--- linux-libre-5.12-gnu/arch/arm64/kernel/stacktrace.c
+++ linux-libre-5.12.8-gnu/arch/arm64/kernel/stacktrace.c
@@ -44,10 +44,6 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 	unsigned long fp = frame->fp;
 	struct stack_info info;
 
-	/* Terminal record; nothing to unwind */
-	if (!fp)
-		return -ENOENT;
-
 	if (fp & 0xf)
 		return -EINVAL;
 
@@ -108,6 +104,12 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 
 	frame->pc = ptrauth_strip_insn_pac(frame->pc);
 
+	/*
+	 * This is a terminal record, so we have finished unwinding.
+	 */
+	if (!frame->fp && !frame->pc)
+		return -ENOENT;
+
 	return 0;
 }
 NOKPROBE_SYMBOL(unwind_frame);
diff --git linux-libre-5.12-gnu/arch/arm64/kernel/vdso/vdso.lds.S linux-libre-5.12.8-gnu/arch/arm64/kernel/vdso/vdso.lds.S
index 61dbb4c838ef..a5e61e09ea92 100644
--- linux-libre-5.12-gnu/arch/arm64/kernel/vdso/vdso.lds.S
+++ linux-libre-5.12.8-gnu/arch/arm64/kernel/vdso/vdso.lds.S
@@ -31,6 +31,13 @@ SECTIONS
 	.gnu.version_d	: { *(.gnu.version_d) }
 	.gnu.version_r	: { *(.gnu.version_r) }
 
+	/*
+	 * Discard .note.gnu.property sections which are unused and have
+	 * different alignment requirement from vDSO note sections.
+	 */
+	/DISCARD/	: {
+		*(.note.GNU-stack .note.gnu.property)
+	}
 	.note		: { *(.note.*) }		:text	:note
 
 	. = ALIGN(16);
@@ -48,7 +55,6 @@ SECTIONS
 	PROVIDE(end = .);
 
 	/DISCARD/	: {
-		*(.note.GNU-stack)
 		*(.data .data.* .gnu.linkonce.d.* .sdata*)
 		*(.bss .sbss .dynbss .dynsbss)
 		*(.eh_frame .eh_frame_hdr)
diff --git linux-libre-5.12-gnu/arch/arm64/kvm/arm.c linux-libre-5.12.8-gnu/arch/arm64/kvm/arm.c
index 7f06ba76698d..84b5f79c9eab 100644
--- linux-libre-5.12-gnu/arch/arm64/kvm/arm.c
+++ linux-libre-5.12.8-gnu/arch/arm64/kvm/arm.c
@@ -580,6 +580,8 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.has_run_once = true;
 
+	kvm_arm_vcpu_init_debug(vcpu);
+
 	if (likely(irqchip_in_kernel(kvm))) {
 		/*
 		 * Map the VGIC hardware resources before running a vcpu the
@@ -1808,8 +1810,10 @@ static int init_hyp_mode(void)
 	if (is_protected_kvm_enabled()) {
 		init_cpu_logical_map();
 
-		if (!init_psci_relay())
+		if (!init_psci_relay()) {
+			err = -ENODEV;
 			goto out_err;
+		}
 	}
 
 	return 0;
diff --git linux-libre-5.12-gnu/arch/arm64/kvm/debug.c linux-libre-5.12.8-gnu/arch/arm64/kvm/debug.c
index dbc890511631..2484b2cca74b 100644
--- linux-libre-5.12-gnu/arch/arm64/kvm/debug.c
+++ linux-libre-5.12.8-gnu/arch/arm64/kvm/debug.c
@@ -68,6 +68,64 @@ void kvm_arm_init_debug(void)
 	__this_cpu_write(mdcr_el2, kvm_call_hyp_ret(__kvm_get_mdcr_el2));
 }
 
+/**
+ * kvm_arm_setup_mdcr_el2 - configure vcpu mdcr_el2 value
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * This ensures we will trap access to:
+ *  - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR)
+ *  - Debug ROM Address (MDCR_EL2_TDRA)
+ *  - OS related registers (MDCR_EL2_TDOSA)
+ *  - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB)
+ *  - Self-hosted Trace Filter controls (MDCR_EL2_TTRF)
+ */
+static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * This also clears MDCR_EL2_E2PB_MASK to disable guest access
+	 * to the profiling buffer.
+	 */
+	vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
+	vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
+				MDCR_EL2_TPMS |
+				MDCR_EL2_TTRF |
+				MDCR_EL2_TPMCR |
+				MDCR_EL2_TDRA |
+				MDCR_EL2_TDOSA);
+
+	/* Is the VM being debugged by userspace? */
+	if (vcpu->guest_debug)
+		/* Route all software debug exceptions to EL2 */
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
+
+	/*
+	 * Trap debug register access when one of the following is true:
+	 *  - Userspace is using the hardware to debug the guest
+	 *  (KVM_GUESTDBG_USE_HW is set).
+	 *  - The guest is not using debug (KVM_ARM64_DEBUG_DIRTY is clear).
+	 */
+	if ((vcpu->guest_debug & KVM_GUESTDBG_USE_HW) ||
+	    !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY))
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
+
+	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
+}
+
+/**
+ * kvm_arm_vcpu_init_debug - setup vcpu debug traps
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * Set vcpu initial mdcr_el2 value.
+ */
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
+{
+	preempt_disable();
+	kvm_arm_setup_mdcr_el2(vcpu);
+	preempt_enable();
+}
+
 /**
  * kvm_arm_reset_debug_ptr - reset the debug ptr to point to the vcpu state
  */
@@ -83,13 +141,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
  * @vcpu:	the vcpu pointer
  *
  * This is called before each entry into the hypervisor to setup any
- * debug related registers. Currently this just ensures we will trap
- * access to:
- *  - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR)
- *  - Debug ROM Address (MDCR_EL2_TDRA)
- *  - OS related registers (MDCR_EL2_TDOSA)
- *  - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB)
- *  - Self-hosted Trace Filter controls (MDCR_EL2_TTRF)
+ * debug related registers.
  *
  * Additionally, KVM only traps guest accesses to the debug registers if
  * the guest is not actively using them (see the KVM_ARM64_DEBUG_DIRTY
@@ -101,28 +153,14 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
 
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 {
-	bool trap_debug = !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY);
 	unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
 
 	trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
 
-	/*
-	 * This also clears MDCR_EL2_E2PB_MASK to disable guest access
-	 * to the profiling buffer.
-	 */
-	vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
-	vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
-				MDCR_EL2_TPMS |
-				MDCR_EL2_TTRF |
-				MDCR_EL2_TPMCR |
-				MDCR_EL2_TDRA |
-				MDCR_EL2_TDOSA);
+	kvm_arm_setup_mdcr_el2(vcpu);
 
 	/* Is Guest debugging in effect? */
 	if (vcpu->guest_debug) {
-		/* Route all software debug exceptions to EL2 */
-		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
-
 		/* Save guest debug state */
 		save_guest_debug_regs(vcpu);
 
@@ -176,7 +214,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 
 			vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
 			vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
-			trap_debug = true;
 
 			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
 						&vcpu->arch.debug_ptr->dbg_bcr[0],
@@ -191,10 +228,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 	BUG_ON(!vcpu->guest_debug &&
 		vcpu->arch.debug_ptr != &vcpu->arch.vcpu_debug_state);
 
-	/* Trap debug register access */
-	if (trap_debug)
-		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
-
 	/* If KDE or MDE are set, perform a full save/restore cycle. */
 	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
 		vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
@@ -203,7 +236,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 	if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
 		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
 
-	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
 	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
 }
 
diff --git linux-libre-5.12-gnu/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c linux-libre-5.12.8-gnu/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c
index ead02c6a7628..6bc88a756cb7 100644
--- linux-libre-5.12-gnu/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c
+++ linux-libre-5.12.8-gnu/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c
@@ -50,6 +50,18 @@
 #ifndef R_AARCH64_ABS64
 #define R_AARCH64_ABS64			257
 #endif
+#ifndef R_AARCH64_PREL64
+#define R_AARCH64_PREL64		260
+#endif
+#ifndef R_AARCH64_PREL32
+#define R_AARCH64_PREL32		261
+#endif
+#ifndef R_AARCH64_PREL16
+#define R_AARCH64_PREL16		262
+#endif
+#ifndef R_AARCH64_PLT32
+#define R_AARCH64_PLT32			314
+#endif
 #ifndef R_AARCH64_LD_PREL_LO19
 #define R_AARCH64_LD_PREL_LO19		273
 #endif
@@ -371,6 +383,12 @@ static void emit_rela_section(Elf64_Shdr *sh_rela)
 		case R_AARCH64_ABS64:
 			emit_rela_abs64(rela, sh_orig_name);
 			break;
+		/* Allow position-relative data relocations. */
+		case R_AARCH64_PREL64:
+		case R_AARCH64_PREL32:
+		case R_AARCH64_PREL16:
+		case R_AARCH64_PLT32:
+			break;
 		/* Allow relocations to generate PC-relative addressing. */
 		case R_AARCH64_LD_PREL_LO19:
 		case R_AARCH64_ADR_PREL_LO21:
diff --git linux-libre-5.12-gnu/arch/arm64/kvm/reset.c linux-libre-5.12.8-gnu/arch/arm64/kvm/reset.c
index bd354cd45d28..4b5acd84b8c8 100644
--- linux-libre-5.12-gnu/arch/arm64/kvm/reset.c
+++ linux-libre-5.12.8-gnu/arch/arm64/kvm/reset.c
@@ -242,6 +242,11 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 
 	/* Reset core registers */
 	memset(vcpu_gp_regs(vcpu), 0, sizeof(*vcpu_gp_regs(vcpu)));
+	memset(&vcpu->arch.ctxt.fp_regs, 0, sizeof(vcpu->arch.ctxt.fp_regs));
+	vcpu->arch.ctxt.spsr_abt = 0;
+	vcpu->arch.ctxt.spsr_und = 0;
+	vcpu->arch.ctxt.spsr_irq = 0;
+	vcpu->arch.ctxt.spsr_fiq = 0;
 	vcpu_gp_regs(vcpu)->pstate = pstate;
 
 	/* Reset system registers */
diff --git linux-libre-5.12-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c linux-libre-5.12.8-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
index 44419679f91a..7740995de982 100644
--- linux-libre-5.12-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ linux-libre-5.12.8-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -87,8 +87,8 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write)
 			r = vgic_v3_set_redist_base(kvm, 0, *addr, 0);
 			goto out;
 		}
-		rdreg = list_first_entry(&vgic->rd_regions,
-					 struct vgic_redist_region, list);
+		rdreg = list_first_entry_or_null(&vgic->rd_regions,
+						 struct vgic_redist_region, list);
 		if (!rdreg)
 			addr_ptr = &undef_value;
 		else
@@ -226,6 +226,9 @@ static int vgic_get_common_attr(struct kvm_device *dev,
 		u64 addr;
 		unsigned long type = (unsigned long)attr->attr;
 
+		if (copy_from_user(&addr, uaddr, sizeof(addr)))
+			return -EFAULT;
+
 		r = kvm_vgic_addr(dev->kvm, type, &addr, false);
 		if (r)
 			return (r == -ENODEV) ? -ENXIO : r;
diff --git linux-libre-5.12-gnu/arch/arm64/mm/flush.c linux-libre-5.12.8-gnu/arch/arm64/mm/flush.c
index ac485163a4a7..6d44c028d1c9 100644
--- linux-libre-5.12-gnu/arch/arm64/mm/flush.c
+++ linux-libre-5.12.8-gnu/arch/arm64/mm/flush.c
@@ -55,8 +55,10 @@ void __sync_icache_dcache(pte_t pte)
 {
 	struct page *page = pte_page(pte);
 
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
+	if (!test_bit(PG_dcache_clean, &page->flags)) {
 		sync_icache_aliases(page_address(page), page_size(page));
+		set_bit(PG_dcache_clean, &page->flags);
+	}
 }
 EXPORT_SYMBOL_GPL(__sync_icache_dcache);
 
diff --git linux-libre-5.12-gnu/arch/arm64/mm/proc.S linux-libre-5.12.8-gnu/arch/arm64/mm/proc.S
index c967bfd30d2b..b183216a591c 100644
--- linux-libre-5.12-gnu/arch/arm64/mm/proc.S
+++ linux-libre-5.12.8-gnu/arch/arm64/mm/proc.S
@@ -444,6 +444,18 @@ SYM_FUNC_START(__cpu_setup)
 	mov	x10, #(SYS_GCR_EL1_RRND | SYS_GCR_EL1_EXCL_MASK)
 	msr_s	SYS_GCR_EL1, x10
 
+	/*
+	 * If GCR_EL1.RRND=1 is implemented the same way as RRND=0, then
+	 * RGSR_EL1.SEED must be non-zero for IRG to produce
+	 * pseudorandom numbers. As RGSR_EL1 is UNKNOWN out of reset, we
+	 * must initialize it.
+	 */
+	mrs	x10, CNTVCT_EL0
+	ands	x10, x10, #SYS_RGSR_EL1_SEED_MASK
+	csinc	x10, x10, xzr, ne
+	lsl	x10, x10, #SYS_RGSR_EL1_SEED_SHIFT
+	msr_s	SYS_RGSR_EL1, x10
+
 	/* clear any pending tag check faults in TFSR*_EL1 */
 	msr_s	SYS_TFSR_EL1, xzr
 	msr_s	SYS_TFSRE0_EL1, xzr
diff --git linux-libre-5.12-gnu/arch/ia64/include/asm/module.h linux-libre-5.12.8-gnu/arch/ia64/include/asm/module.h
index 5a29652e6def..7271b9c5fc76 100644
--- linux-libre-5.12-gnu/arch/ia64/include/asm/module.h
+++ linux-libre-5.12.8-gnu/arch/ia64/include/asm/module.h
@@ -14,16 +14,20 @@
 struct elf64_shdr;			/* forward declration */
 
 struct mod_arch_specific {
+	/* Used only at module load time. */
 	struct elf64_shdr *core_plt;	/* core PLT section */
 	struct elf64_shdr *init_plt;	/* init PLT section */
 	struct elf64_shdr *got;		/* global offset table */
 	struct elf64_shdr *opd;		/* official procedure descriptors */
 	struct elf64_shdr *unwind;	/* unwind-table section */
 	unsigned long gp;		/* global-pointer for module */
+	unsigned int next_got_entry;	/* index of next available got entry */
 
+	/* Used at module run and cleanup time. */
 	void *core_unw_table;		/* core unwind-table cookie returned by unwinder */
 	void *init_unw_table;		/* init unwind-table cookie returned by unwinder */
-	unsigned int next_got_entry;	/* index of next available got entry */
+	void *opd_addr;			/* symbolize uses .opd to get to actual function */
+	unsigned long opd_size;
 };
 
 #define ARCH_SHF_SMALL	SHF_IA_64_SHORT
diff --git linux-libre-5.12-gnu/arch/ia64/kernel/acpi.c linux-libre-5.12.8-gnu/arch/ia64/kernel/acpi.c
index a5636524af76..e2af6b172200 100644
--- linux-libre-5.12-gnu/arch/ia64/kernel/acpi.c
+++ linux-libre-5.12.8-gnu/arch/ia64/kernel/acpi.c
@@ -446,7 +446,8 @@ void __init acpi_numa_fixup(void)
 	if (srat_num_cpus == 0) {
 		node_set_online(0);
 		node_cpuid[0].phys_id = hard_smp_processor_id();
-		return;
+		slit_distance(0, 0) = LOCAL_DISTANCE;
+		goto out;
 	}
 
 	/*
@@ -489,7 +490,7 @@ void __init acpi_numa_fixup(void)
 			for (j = 0; j < MAX_NUMNODES; j++)
 				slit_distance(i, j) = i == j ?
 					LOCAL_DISTANCE : REMOTE_DISTANCE;
-		return;
+		goto out;
 	}
 
 	memset(numa_slit, -1, sizeof(numa_slit));
@@ -514,6 +515,8 @@ void __init acpi_numa_fixup(void)
 		printk("\n");
 	}
 #endif
+out:
+	node_possible_map = node_online_map;
 }
 #endif				/* CONFIG_ACPI_NUMA */
 
diff --git linux-libre-5.12-gnu/arch/ia64/kernel/efi.c linux-libre-5.12.8-gnu/arch/ia64/kernel/efi.c
index c5fe21de46a8..31149e41f9be 100644
--- linux-libre-5.12-gnu/arch/ia64/kernel/efi.c
+++ linux-libre-5.12.8-gnu/arch/ia64/kernel/efi.c
@@ -415,10 +415,10 @@ efi_get_pal_addr (void)
 		mask  = ~((1 << IA64_GRANULE_SHIFT) - 1);
 
 		printk(KERN_INFO "CPU %d: mapping PAL code "
-                       "[0x%lx-0x%lx) into [0x%lx-0x%lx)\n",
-                       smp_processor_id(), md->phys_addr,
-                       md->phys_addr + efi_md_size(md),
-                       vaddr & mask, (vaddr & mask) + IA64_GRANULE_SIZE);
+			"[0x%llx-0x%llx) into [0x%llx-0x%llx)\n",
+			smp_processor_id(), md->phys_addr,
+			md->phys_addr + efi_md_size(md),
+			vaddr & mask, (vaddr & mask) + IA64_GRANULE_SIZE);
 #endif
 		return __va(md->phys_addr);
 	}
@@ -560,6 +560,7 @@ efi_init (void)
 	{
 		efi_memory_desc_t *md;
 		void *p;
+		unsigned int i;
 
 		for (i = 0, p = efi_map_start; p < efi_map_end;
 		     ++i, p += efi_desc_size)
@@ -586,7 +587,7 @@ efi_init (void)
 			}
 
 			printk("mem%02d: %s "
-			       "range=[0x%016lx-0x%016lx) (%4lu%s)\n",
+			       "range=[0x%016llx-0x%016llx) (%4lu%s)\n",
 			       i, efi_md_typeattr_format(buf, sizeof(buf), md),
 			       md->phys_addr,
 			       md->phys_addr + efi_md_size(md), size, unit);
diff --git linux-libre-5.12-gnu/arch/ia64/kernel/module.c linux-libre-5.12.8-gnu/arch/ia64/kernel/module.c
index 00a496cb346f..2cba53c1da82 100644
--- linux-libre-5.12-gnu/arch/ia64/kernel/module.c
+++ linux-libre-5.12.8-gnu/arch/ia64/kernel/module.c
@@ -905,9 +905,31 @@ register_unwind_table (struct module *mod)
 int
 module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod)
 {
+	struct mod_arch_specific *mas = &mod->arch;
+
 	DEBUGP("%s: init: entry=%p\n", __func__, mod->init);
-	if (mod->arch.unwind)
+	if (mas->unwind)
 		register_unwind_table(mod);
+
+	/*
+	 * ".opd" was already relocated to the final destination. Store
+	 * it's address for use in symbolizer.
+	 */
+	mas->opd_addr = (void *)mas->opd->sh_addr;
+	mas->opd_size = mas->opd->sh_size;
+
+	/*
+	 * Module relocation was already done at this point. Section
+	 * headers are about to be deleted. Wipe out load-time context.
+	 */
+	mas->core_plt = NULL;
+	mas->init_plt = NULL;
+	mas->got = NULL;
+	mas->opd = NULL;
+	mas->unwind = NULL;
+	mas->gp = 0;
+	mas->next_got_entry = 0;
+
 	return 0;
 }
 
@@ -926,10 +948,9 @@ module_arch_cleanup (struct module *mod)
 
 void *dereference_module_function_descriptor(struct module *mod, void *ptr)
 {
-	Elf64_Shdr *opd = mod->arch.opd;
+	struct mod_arch_specific *mas = &mod->arch;
 
-	if (ptr < (void *)opd->sh_addr ||
-			ptr >= (void *)(opd->sh_addr + opd->sh_size))
+	if (ptr < mas->opd_addr || ptr >= mas->opd_addr + mas->opd_size)
 		return ptr;
 
 	return dereference_function_descriptor(ptr);
diff --git linux-libre-5.12-gnu/arch/m68k/include/asm/mvme147hw.h linux-libre-5.12.8-gnu/arch/m68k/include/asm/mvme147hw.h
index 257b29184af9..e28eb1c0e0bf 100644
--- linux-libre-5.12-gnu/arch/m68k/include/asm/mvme147hw.h
+++ linux-libre-5.12.8-gnu/arch/m68k/include/asm/mvme147hw.h
@@ -66,6 +66,9 @@ struct pcc_regs {
 #define PCC_INT_ENAB		0x08
 
 #define PCC_TIMER_INT_CLR	0x80
+
+#define PCC_TIMER_TIC_EN	0x01
+#define PCC_TIMER_COC_EN	0x02
 #define PCC_TIMER_CLR_OVF	0x04
 
 #define PCC_LEVEL_ABORT		0x07
diff --git linux-libre-5.12-gnu/arch/m68k/kernel/sys_m68k.c linux-libre-5.12.8-gnu/arch/m68k/kernel/sys_m68k.c
index 1c235d8f53f3..f55bdcb8e4f1 100644
--- linux-libre-5.12-gnu/arch/m68k/kernel/sys_m68k.c
+++ linux-libre-5.12.8-gnu/arch/m68k/kernel/sys_m68k.c
@@ -388,6 +388,8 @@ sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
 		ret = -EPERM;
 		if (!capable(CAP_SYS_ADMIN))
 			goto out;
+
+		mmap_read_lock(current->mm);
 	} else {
 		struct vm_area_struct *vma;
 
diff --git linux-libre-5.12-gnu/arch/m68k/mvme147/config.c linux-libre-5.12.8-gnu/arch/m68k/mvme147/config.c
index cfdc7f912e14..e1e90c49a496 100644
--- linux-libre-5.12-gnu/arch/m68k/mvme147/config.c
+++ linux-libre-5.12.8-gnu/arch/m68k/mvme147/config.c
@@ -114,8 +114,10 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;
-	m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF;
+	m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF | PCC_TIMER_COC_EN |
+			     PCC_TIMER_TIC_EN;
+	m147_pcc->t1_int_cntrl = PCC_INT_ENAB | PCC_TIMER_INT_CLR |
+				 PCC_LEVEL_TIMER1;
 	clk_total += PCC_TIMER_CYCLES;
 	legacy_timer_tick(1);
 	local_irq_restore(flags);
@@ -133,10 +135,10 @@ void mvme147_sched_init (void)
 	/* Init the clock with a value */
 	/* The clock counter increments until 0xFFFF then reloads */
 	m147_pcc->t1_preload = PCC_TIMER_PRELOAD;
-	m147_pcc->t1_cntrl = 0x0;	/* clear timer */
-	m147_pcc->t1_cntrl = 0x3;	/* start timer */
-	m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;  /* clear pending ints */
-	m147_pcc->t1_int_cntrl = PCC_INT_ENAB|PCC_LEVEL_TIMER1;
+	m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF | PCC_TIMER_COC_EN |
+			     PCC_TIMER_TIC_EN;
+	m147_pcc->t1_int_cntrl = PCC_INT_ENAB | PCC_TIMER_INT_CLR |
+				 PCC_LEVEL_TIMER1;
 
 	clocksource_register_hz(&mvme147_clk, PCC_TIMER_CLOCK_FREQ);
 }
diff --git linux-libre-5.12-gnu/arch/m68k/mvme16x/config.c linux-libre-5.12.8-gnu/arch/m68k/mvme16x/config.c
index 30357fe4ba6c..b59593c7cfb9 100644
--- linux-libre-5.12-gnu/arch/m68k/mvme16x/config.c
+++ linux-libre-5.12.8-gnu/arch/m68k/mvme16x/config.c
@@ -366,6 +366,7 @@ static u32 clk_total;
 #define PCCTOVR1_COC_EN      0x02
 #define PCCTOVR1_OVR_CLR     0x04
 
+#define PCCTIC1_INT_LEVEL    6
 #define PCCTIC1_INT_CLR      0x08
 #define PCCTIC1_INT_EN       0x10
 
@@ -374,8 +375,8 @@ static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	out_8(PCCTIC1, in_8(PCCTIC1) | PCCTIC1_INT_CLR);
-	out_8(PCCTOVR1, PCCTOVR1_OVR_CLR);
+	out_8(PCCTOVR1, PCCTOVR1_OVR_CLR | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
+	out_8(PCCTIC1, PCCTIC1_INT_EN | PCCTIC1_INT_CLR | PCCTIC1_INT_LEVEL);
 	clk_total += PCC_TIMER_CYCLES;
 	legacy_timer_tick(1);
 	local_irq_restore(flags);
@@ -389,14 +390,15 @@ void mvme16x_sched_init(void)
     int irq;
 
     /* Using PCCchip2 or MC2 chip tick timer 1 */
-    out_be32(PCCTCNT1, 0);
-    out_be32(PCCTCMP1, PCC_TIMER_CYCLES);
-    out_8(PCCTOVR1, in_8(PCCTOVR1) | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
-    out_8(PCCTIC1, PCCTIC1_INT_EN | 6);
     if (request_irq(MVME16x_IRQ_TIMER, mvme16x_timer_int, IRQF_TIMER, "timer",
                     NULL))
 	panic ("Couldn't register timer int");
 
+    out_be32(PCCTCNT1, 0);
+    out_be32(PCCTCMP1, PCC_TIMER_CYCLES);
+    out_8(PCCTOVR1, PCCTOVR1_OVR_CLR | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
+    out_8(PCCTIC1, PCCTIC1_INT_EN | PCCTIC1_INT_CLR | PCCTIC1_INT_LEVEL);
+
     clocksource_register_hz(&mvme16x_clk, PCC_TIMER_CLOCK_FREQ);
 
     if (brdno == 0x0162 || brdno == 0x172)
diff --git linux-libre-5.12-gnu/arch/mips/Kconfig linux-libre-5.12.8-gnu/arch/mips/Kconfig
index d89efba3d8a4..e89d63cd92d1 100644
--- linux-libre-5.12-gnu/arch/mips/Kconfig
+++ linux-libre-5.12.8-gnu/arch/mips/Kconfig
@@ -6,6 +6,7 @@ config MIPS
 	select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_KCOV
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA
 	select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
diff --git linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm3368.dtsi linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm3368.dtsi
index 69cbef472377..d4b2b430dad0 100644
--- linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm3368.dtsi
+++ linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -59,7 +59,7 @@
 
 		periph_cntl: syscon@fff8c008 {
 			compatible = "syscon";
-			reg = <0xfff8c000 0x4>;
+			reg = <0xfff8c008 0x4>;
 			native-endian;
 		};
 
diff --git linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm63268.dtsi linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm63268.dtsi
index e0021ff9f144..940594436872 100644
--- linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm63268.dtsi
+++ linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -59,7 +59,7 @@
 
 		periph_cntl: syscon@10000008 {
 			compatible = "syscon";
-			reg = <0x10000000 0xc>;
+			reg = <0x10000008 0x4>;
 			native-endian;
 		};
 
diff --git linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm6358.dtsi linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm6358.dtsi
index 9d93e7f5e6fc..d79c88c2fc9c 100644
--- linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm6358.dtsi
+++ linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -59,7 +59,7 @@
 
 		periph_cntl: syscon@fffe0008 {
 			compatible = "syscon";
-			reg = <0xfffe0000 0x4>;
+			reg = <0xfffe0008 0x4>;
 			native-endian;
 		};
 
diff --git linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm6362.dtsi linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm6362.dtsi
index eb10341b75ba..8a21cb761ffd 100644
--- linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -59,7 +59,7 @@
 
 		periph_cntl: syscon@10000008 {
 			compatible = "syscon";
-			reg = <0x10000000 0xc>;
+			reg = <0x10000008 0x4>;
 			native-endian;
 		};
 
diff --git linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm6368.dtsi linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 52c19f40b9cc..8e87867ebc04 100644
--- linux-libre-5.12-gnu/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ linux-libre-5.12.8-gnu/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -59,7 +59,7 @@
 
 		periph_cntl: syscon@100000008 {
 			compatible = "syscon";
-			reg = <0x10000000 0xc>;
+			reg = <0x10000008 0x4>;
 			native-endian;
 		};
 
diff --git linux-libre-5.12-gnu/arch/mips/crypto/poly1305-glue.c linux-libre-5.12.8-gnu/arch/mips/crypto/poly1305-glue.c
index fc881b46d911..bc6110fb98e0 100644
--- linux-libre-5.12-gnu/arch/mips/crypto/poly1305-glue.c
+++ linux-libre-5.12.8-gnu/arch/mips/crypto/poly1305-glue.c
@@ -17,7 +17,7 @@ asmlinkage void poly1305_init_mips(void *state, const u8 *key);
 asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit);
 asmlinkage void poly1305_emit_mips(void *state, u8 *digest, const u32 *nonce);
 
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
 {
 	poly1305_init_mips(&dctx->h, key);
 	dctx->s[0] = get_unaligned_le32(key + 16);
diff --git linux-libre-5.12-gnu/arch/mips/generic/board-boston.its.S linux-libre-5.12.8-gnu/arch/mips/generic/board-boston.its.S
index a7f51f97b910..c45ad2759421 100644
--- linux-libre-5.12-gnu/arch/mips/generic/board-boston.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/board-boston.its.S
@@ -1,22 +1,22 @@
 / {
 	images {
-		fdt@boston {
+		fdt-boston {
 			description = "img,boston Device Tree";
 			data = /incbin/("boot/dts/img/boston.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		conf@boston {
+		conf-boston {
 			description = "Boston Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@boston";
+			kernel = "kernel";
+			fdt = "fdt-boston";
 		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/mips/generic/board-jaguar2.its.S linux-libre-5.12.8-gnu/arch/mips/generic/board-jaguar2.its.S
index fb0e589eeff7..c2b8d479b26c 100644
--- linux-libre-5.12-gnu/arch/mips/generic/board-jaguar2.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/board-jaguar2.its.S
@@ -1,23 +1,23 @@
 /* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
 / {
 	images {
-		fdt@jaguar2_pcb110 {
+		fdt-jaguar2_pcb110 {
 			description = "MSCC Jaguar2 PCB110 Device Tree";
 			data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
-		fdt@jaguar2_pcb111 {
+		fdt-jaguar2_pcb111 {
 			description = "MSCC Jaguar2 PCB111 Device Tree";
 			data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
@@ -26,14 +26,14 @@
 	configurations {
 		pcb110 {
 			description = "Jaguar2 Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@jaguar2_pcb110";
+			kernel = "kernel";
+			fdt = "fdt-jaguar2_pcb110";
 			ramdisk = "ramdisk";
 		};
 		pcb111 {
 			description = "Jaguar2 Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@jaguar2_pcb111";
+			kernel = "kernel";
+			fdt = "fdt-jaguar2_pcb111";
 			ramdisk = "ramdisk";
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/mips/generic/board-luton.its.S linux-libre-5.12.8-gnu/arch/mips/generic/board-luton.its.S
index 39a543f62f25..bd9837c9af97 100644
--- linux-libre-5.12-gnu/arch/mips/generic/board-luton.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/board-luton.its.S
@@ -1,13 +1,13 @@
 /* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
 / {
 	images {
-		fdt@luton_pcb091 {
+		fdt-luton_pcb091 {
 			description = "MSCC Luton PCB091 Device Tree";
 			data = /incbin/("boot/dts/mscc/luton_pcb091.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
@@ -16,8 +16,8 @@
 	configurations {
 		pcb091 {
 			description = "Luton Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@luton_pcb091";
+			kernel = "kernel";
+			fdt = "fdt-luton_pcb091";
 		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/mips/generic/board-ni169445.its.S linux-libre-5.12.8-gnu/arch/mips/generic/board-ni169445.its.S
index e4cb4f95a8cc..0a2e8f7a8526 100644
--- linux-libre-5.12-gnu/arch/mips/generic/board-ni169445.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/board-ni169445.its.S
@@ -1,22 +1,22 @@
 / {
 	images {
-		fdt@ni169445 {
+		fdt-ni169445 {
 			description = "NI 169445 device tree";
 			data = /incbin/("boot/dts/ni/169445.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		conf@ni169445 {
+		conf-ni169445 {
 			description = "NI 169445 Linux Kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@ni169445";
+			kernel = "kernel";
+			fdt = "fdt-ni169445";
 		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/mips/generic/board-ocelot.its.S linux-libre-5.12.8-gnu/arch/mips/generic/board-ocelot.its.S
index 3da23988149a..8c7e3a1b68d3 100644
--- linux-libre-5.12-gnu/arch/mips/generic/board-ocelot.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/board-ocelot.its.S
@@ -1,40 +1,40 @@
 /* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
 / {
 	images {
-		fdt@ocelot_pcb123 {
+		fdt-ocelot_pcb123 {
 			description = "MSCC Ocelot PCB123 Device Tree";
 			data = /incbin/("boot/dts/mscc/ocelot_pcb123.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 
-		fdt@ocelot_pcb120 {
+		fdt-ocelot_pcb120 {
 			description = "MSCC Ocelot PCB120 Device Tree";
 			data = /incbin/("boot/dts/mscc/ocelot_pcb120.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		conf@ocelot_pcb123 {
+		conf-ocelot_pcb123 {
 			description = "Ocelot Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@ocelot_pcb123";
+			kernel = "kernel";
+			fdt = "fdt-ocelot_pcb123";
 		};
 
-		conf@ocelot_pcb120 {
+		conf-ocelot_pcb120 {
 			description = "Ocelot Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@ocelot_pcb120";
+			kernel = "kernel";
+			fdt = "fdt-ocelot_pcb120";
 		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/mips/generic/board-serval.its.S linux-libre-5.12.8-gnu/arch/mips/generic/board-serval.its.S
index 4ea4fc9d757f..dde833efe980 100644
--- linux-libre-5.12-gnu/arch/mips/generic/board-serval.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/board-serval.its.S
@@ -1,13 +1,13 @@
 /* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
 / {
 	images {
-		fdt@serval_pcb105 {
+		fdt-serval_pcb105 {
 			description = "MSCC Serval PCB105 Device Tree";
 			data = /incbin/("boot/dts/mscc/serval_pcb105.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
@@ -16,8 +16,8 @@
 	configurations {
 		pcb105 {
 			description = "Serval Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@serval_pcb105";
+			kernel = "kernel";
+			fdt = "fdt-serval_pcb105";
 			ramdisk = "ramdisk";
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/mips/generic/board-xilfpga.its.S linux-libre-5.12.8-gnu/arch/mips/generic/board-xilfpga.its.S
index a2e773d3f14f..08c1e900eb4e 100644
--- linux-libre-5.12-gnu/arch/mips/generic/board-xilfpga.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/board-xilfpga.its.S
@@ -1,22 +1,22 @@
 / {
 	images {
-		fdt@xilfpga {
+		fdt-xilfpga {
 			description = "MIPSfpga (xilfpga) Device Tree";
 			data = /incbin/("boot/dts/xilfpga/nexys4ddr.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		conf@xilfpga {
+		conf-xilfpga {
 			description = "MIPSfpga Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@xilfpga";
+			kernel = "kernel";
+			fdt = "fdt-xilfpga";
 		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/mips/generic/vmlinux.its.S linux-libre-5.12.8-gnu/arch/mips/generic/vmlinux.its.S
index 1a08438fd893..3e254676540f 100644
--- linux-libre-5.12-gnu/arch/mips/generic/vmlinux.its.S
+++ linux-libre-5.12.8-gnu/arch/mips/generic/vmlinux.its.S
@@ -6,7 +6,7 @@
 	#address-cells = <ADDR_CELLS>;
 
 	images {
-		kernel@0 {
+		kernel {
 			description = KERNEL_NAME;
 			data = /incbin/(VMLINUX_BINARY);
 			type = "kernel";
@@ -15,18 +15,18 @@
 			compression = VMLINUX_COMPRESSION;
 			load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
 			entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		default = "conf@default";
+		default = "conf-default";
 
-		conf@default {
+		conf-default {
 			description = "Generic Linux kernel";
-			kernel = "kernel@0";
+			kernel = "kernel";
 		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/mips/include/asm/asmmacro.h linux-libre-5.12.8-gnu/arch/mips/include/asm/asmmacro.h
index 86f2323ebe6b..ca83ada7015f 100644
--- linux-libre-5.12-gnu/arch/mips/include/asm/asmmacro.h
+++ linux-libre-5.12.8-gnu/arch/mips/include/asm/asmmacro.h
@@ -44,8 +44,7 @@
 	.endm
 #endif
 
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
-    defined(CONFIG_CPU_MIPSR6)
+#ifdef CONFIG_CPU_HAS_DIEI
 	.macro	local_irq_enable reg=t0
 	ei
 	irq_enable_hazard
diff --git linux-libre-5.12-gnu/arch/mips/include/asm/div64.h linux-libre-5.12.8-gnu/arch/mips/include/asm/div64.h
index dc5ea5736440..ceece76fc971 100644
--- linux-libre-5.12-gnu/arch/mips/include/asm/div64.h
+++ linux-libre-5.12.8-gnu/arch/mips/include/asm/div64.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2000, 2004  Maciej W. Rozycki
+ * Copyright (C) 2000, 2004, 2021  Maciej W. Rozycki
  * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org)
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,25 +9,18 @@
 #ifndef __ASM_DIV64_H
 #define __ASM_DIV64_H
 
-#include <asm-generic/div64.h>
-
-#if BITS_PER_LONG == 64
+#include <asm/bitsperlong.h>
 
-#include <linux/types.h>
+#if BITS_PER_LONG == 32
 
 /*
  * No traps on overflows for any of these...
  */
 
-#define __div64_32(n, base)						\
-({									\
+#define do_div64_32(res, high, low, base) ({				\
 	unsigned long __cf, __tmp, __tmp2, __i;				\
 	unsigned long __quot32, __mod32;				\
-	unsigned long __high, __low;					\
-	unsigned long long __n;						\
 									\
-	__high = *__n >> 32;						\
-	__low = __n;							\
 	__asm__(							\
 	"	.set	push					\n"	\
 	"	.set	noat					\n"	\
@@ -51,18 +44,48 @@
 	"	subu	%0, %0, %z6				\n"	\
 	"	addiu	%2, %2, 1				\n"	\
 	"3:							\n"	\
-	"	bnez	%4, 0b\n\t"					\
-	"	 srl	%5, %1, 0x1f\n\t"				\
+	"	bnez	%4, 0b					\n"	\
+	"	 srl	%5, %1, 0x1f				\n"	\
 	"	.set	pop"						\
 	: "=&r" (__mod32), "=&r" (__tmp),				\
 	  "=&r" (__quot32), "=&r" (__cf),				\
 	  "=&r" (__i), "=&r" (__tmp2)					\
-	: "Jr" (base), "0" (__high), "1" (__low));			\
+	: "Jr" (base), "0" (high), "1" (low));				\
 									\
-	(__n) = __quot32;						\
+	(res) = __quot32;						\
 	__mod32;							\
 })
 
-#endif /* BITS_PER_LONG == 64 */
+#define __div64_32(n, base) ({						\
+	unsigned long __upper, __low, __high, __radix;			\
+	unsigned long long __quot;					\
+	unsigned long long __div;					\
+	unsigned long __mod;						\
+									\
+	__div = (*n);							\
+	__radix = (base);						\
+									\
+	__high = __div >> 32;						\
+	__low = __div;							\
+									\
+	if (__high < __radix) {						\
+		__upper = __high;					\
+		__high = 0;						\
+	} else {							\
+		__upper = __high % __radix;				\
+		__high /= __radix;					\
+	}								\
+									\
+	__mod = do_div64_32(__low, __upper, __low, __radix);		\
+									\
+	__quot = __high;						\
+	__quot = __quot << 32 | __low;					\
+	(*n) = __quot;							\
+	__mod;								\
+})
+
+#endif /* BITS_PER_LONG == 32 */
+
+#include <asm-generic/div64.h>
 
 #endif /* __ASM_DIV64_H */
diff --git linux-libre-5.12-gnu/arch/mips/include/asm/vdso/gettimeofday.h linux-libre-5.12.8-gnu/arch/mips/include/asm/vdso/gettimeofday.h
index 2203e2d0ae2a..44a45f3fa4b0 100644
--- linux-libre-5.12-gnu/arch/mips/include/asm/vdso/gettimeofday.h
+++ linux-libre-5.12.8-gnu/arch/mips/include/asm/vdso/gettimeofday.h
@@ -20,6 +20,12 @@
 
 #define VDSO_HAS_CLOCK_GETRES		1
 
+#if MIPS_ISA_REV < 6
+#define VDSO_SYSCALL_CLOBBERS "hi", "lo",
+#else
+#define VDSO_SYSCALL_CLOBBERS
+#endif
+
 static __always_inline long gettimeofday_fallback(
 				struct __kernel_old_timeval *_tv,
 				struct timezone *_tz)
@@ -35,7 +41,9 @@ static __always_inline long gettimeofday_fallback(
 	: "=r" (ret), "=r" (error)
 	: "r" (tv), "r" (tz), "r" (nr)
 	: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
-	  "$14", "$15", "$24", "$25", "hi", "lo", "memory");
+	  "$14", "$15", "$24", "$25",
+	  VDSO_SYSCALL_CLOBBERS
+	  "memory");
 
 	return error ? -ret : ret;
 }
@@ -59,7 +67,9 @@ static __always_inline long clock_gettime_fallback(
 	: "=r" (ret), "=r" (error)
 	: "r" (clkid), "r" (ts), "r" (nr)
 	: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
-	  "$14", "$15", "$24", "$25", "hi", "lo", "memory");
+	  "$14", "$15", "$24", "$25",
+	  VDSO_SYSCALL_CLOBBERS
+	  "memory");
 
 	return error ? -ret : ret;
 }
@@ -83,7 +93,9 @@ static __always_inline int clock_getres_fallback(
 	: "=r" (ret), "=r" (error)
 	: "r" (clkid), "r" (ts), "r" (nr)
 	: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
-	  "$14", "$15", "$24", "$25", "hi", "lo", "memory");
+	  "$14", "$15", "$24", "$25",
+	  VDSO_SYSCALL_CLOBBERS
+	  "memory");
 
 	return error ? -ret : ret;
 }
@@ -105,7 +117,9 @@ static __always_inline long clock_gettime32_fallback(
 	: "=r" (ret), "=r" (error)
 	: "r" (clkid), "r" (ts), "r" (nr)
 	: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
-	  "$14", "$15", "$24", "$25", "hi", "lo", "memory");
+	  "$14", "$15", "$24", "$25",
+	  VDSO_SYSCALL_CLOBBERS
+	  "memory");
 
 	return error ? -ret : ret;
 }
@@ -125,7 +139,9 @@ static __always_inline int clock_getres32_fallback(
 	: "=r" (ret), "=r" (error)
 	: "r" (clkid), "r" (ts), "r" (nr)
 	: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
-	  "$14", "$15", "$24", "$25", "hi", "lo", "memory");
+	  "$14", "$15", "$24", "$25",
+	  VDSO_SYSCALL_CLOBBERS
+	  "memory");
 
 	return error ? -ret : ret;
 }
diff --git linux-libre-5.12-gnu/arch/mips/kernel/cpu-probe.c linux-libre-5.12.8-gnu/arch/mips/kernel/cpu-probe.c
index b71892064f27..0ef240adefb5 100644
--- linux-libre-5.12-gnu/arch/mips/kernel/cpu-probe.c
+++ linux-libre-5.12.8-gnu/arch/mips/kernel/cpu-probe.c
@@ -1752,7 +1752,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 			set_isa(c, MIPS_CPU_ISA_M64R2);
 			break;
 		}
-		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT |
 				MIPS_ASE_LOONGSON_EXT2);
 		break;
@@ -1782,7 +1781,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 		 * register, we correct it here.
 		 */
 		c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
-		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
 			MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
 		c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */
@@ -1793,7 +1791,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 		set_elf_platform(cpu, "loongson3a");
 		set_isa(c, MIPS_CPU_ISA_M64R2);
 		decode_cpucfg(c);
-		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		break;
 	default:
 		panic("Unknown Loongson Processor ID!");
diff --git linux-libre-5.12-gnu/arch/mips/loongson64/init.c linux-libre-5.12.8-gnu/arch/mips/loongson64/init.c
index cfa788bca871..1c664b23c0f9 100644
--- linux-libre-5.12-gnu/arch/mips/loongson64/init.c
+++ linux-libre-5.12.8-gnu/arch/mips/loongson64/init.c
@@ -126,7 +126,7 @@ static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_
 		return -ENOMEM;
 
 	range->fwnode = fwnode;
-	range->size = size;
+	range->size = size = round_up(size, PAGE_SIZE);
 	range->hw_start = hw_start;
 	range->flags = LOGIC_PIO_CPU_MMIO;
 
diff --git linux-libre-5.12-gnu/arch/mips/pci/pci-legacy.c linux-libre-5.12.8-gnu/arch/mips/pci/pci-legacy.c
index 39052de915f3..3a909194284a 100644
--- linux-libre-5.12-gnu/arch/mips/pci/pci-legacy.c
+++ linux-libre-5.12.8-gnu/arch/mips/pci/pci-legacy.c
@@ -166,8 +166,13 @@ void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
 			res = hose->mem_resource;
 			break;
 		}
-		if (res != NULL)
-			of_pci_range_to_resource(&range, node, res);
+		if (res != NULL) {
+			res->name = node->full_name;
+			res->flags = range.flags;
+			res->start = range.cpu_addr;
+			res->end = range.cpu_addr + range.size - 1;
+			res->parent = res->child = res->sibling = NULL;
+		}
 	}
 }
 
diff --git linux-libre-5.12-gnu/arch/mips/pci/pci-mt7620.c linux-libre-5.12.8-gnu/arch/mips/pci/pci-mt7620.c
index d36061603752..e032932348d6 100644
--- linux-libre-5.12-gnu/arch/mips/pci/pci-mt7620.c
+++ linux-libre-5.12.8-gnu/arch/mips/pci/pci-mt7620.c
@@ -30,6 +30,7 @@
 #define RALINK_GPIOMODE			0x60
 
 #define PPLL_CFG1			0x9c
+#define PPLL_LD				BIT(23)
 
 #define PPLL_DRV			0xa0
 #define PDRV_SW_SET			BIT(31)
@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct platform_device *pdev)
 	rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
 	mdelay(100);
 
-	if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
-		dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
+	if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) {
+		dev_err(&pdev->dev, "pcie PLL not locked, aborting init\n");
 		reset_control_assert(rstpcie0);
 		rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
 		return -1;
diff --git linux-libre-5.12-gnu/arch/mips/pci/pci-rt2880.c linux-libre-5.12.8-gnu/arch/mips/pci/pci-rt2880.c
index e1f12e398136..f1538d2be89e 100644
--- linux-libre-5.12-gnu/arch/mips/pci/pci-rt2880.c
+++ linux-libre-5.12.8-gnu/arch/mips/pci/pci-rt2880.c
@@ -180,7 +180,6 @@ static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
 
 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	u16 cmd;
 	int irq = -1;
 
 	if (dev->bus->number != 0)
@@ -188,8 +187,6 @@ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 	switch (PCI_SLOT(dev->devfn)) {
 	case 0x00:
-		rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
-		(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
 		break;
 	case 0x11:
 		irq = RT288X_CPU_IRQ_PCI;
@@ -201,16 +198,6 @@ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		break;
 	}
 
-	pci_write_config_byte((struct pci_dev *) dev,
-		PCI_CACHE_LINE_SIZE, 0x14);
-	pci_write_config_byte((struct pci_dev *) dev, PCI_LATENCY_TIMER, 0xFF);
-	pci_read_config_word((struct pci_dev *) dev, PCI_COMMAND, &cmd);
-	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
-		PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
-	pci_write_config_word((struct pci_dev *) dev, PCI_COMMAND, cmd);
-	pci_write_config_byte((struct pci_dev *) dev, PCI_INTERRUPT_LINE,
-			      dev->irq);
 	return irq;
 }
 
@@ -251,6 +238,30 @@ static int rt288x_pci_probe(struct platform_device *pdev)
 
 int pcibios_plat_dev_init(struct pci_dev *dev)
 {
+	static bool slot0_init;
+
+	/*
+	 * Nobody seems to initialize slot 0, but this platform requires it, so
+	 * do it once when some other slot is being enabled. The PCI subsystem
+	 * should configure other slots properly, so no need to do anything
+	 * special for those.
+	 */
+	if (!slot0_init && dev->bus->number == 0) {
+		u16 cmd;
+		u32 bar0;
+
+		slot0_init = true;
+
+		pci_bus_write_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
+					   0x08000000);
+		pci_bus_read_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
+					  &bar0);
+
+		pci_bus_read_config_word(dev->bus, 0, PCI_COMMAND, &cmd);
+		cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+		pci_bus_write_config_word(dev->bus, 0, PCI_COMMAND, cmd);
+	}
+
 	return 0;
 }
 
diff --git linux-libre-5.12-gnu/arch/openrisc/kernel/setup.c linux-libre-5.12.8-gnu/arch/openrisc/kernel/setup.c
index 2416a9f91533..c6f9e7b9f7cb 100644
--- linux-libre-5.12-gnu/arch/openrisc/kernel/setup.c
+++ linux-libre-5.12.8-gnu/arch/openrisc/kernel/setup.c
@@ -278,6 +278,8 @@ void calibrate_delay(void)
 	pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
 		loops_per_jiffy / (500000 / HZ),
 		(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+
+	of_node_put(cpu);
 }
 
 void __init setup_arch(char **cmdline_p)
diff --git linux-libre-5.12-gnu/arch/openrisc/mm/init.c linux-libre-5.12.8-gnu/arch/openrisc/mm/init.c
index bf9b2310fc93..f3fa02b8838a 100644
--- linux-libre-5.12-gnu/arch/openrisc/mm/init.c
+++ linux-libre-5.12.8-gnu/arch/openrisc/mm/init.c
@@ -75,7 +75,6 @@ static void __init map_ram(void)
 	/* These mark extents of read-only kernel pages...
 	 * ...from vmlinux.lds.S
 	 */
-	struct memblock_region *region;
 
 	v = PAGE_OFFSET;
 
@@ -121,7 +120,7 @@ static void __init map_ram(void)
 		}
 
 		printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
-		       region->base, region->base + region->size);
+		       start, end);
 	}
 }
 
diff --git linux-libre-5.12-gnu/arch/powerpc/Kconfig linux-libre-5.12.8-gnu/arch/powerpc/Kconfig
index 386ae12d8523..57c0ab71d51e 100644
--- linux-libre-5.12-gnu/arch/powerpc/Kconfig
+++ linux-libre-5.12.8-gnu/arch/powerpc/Kconfig
@@ -224,7 +224,7 @@ config PPC
 	select HAVE_LIVEPATCH			if HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
-	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if (PPC64 && PPC_BOOK3S)
+	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC64 && PPC_BOOK3S && SMP
 	select HAVE_OPTPROBES			if PPC64
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI		if PPC64
diff --git linux-libre-5.12-gnu/arch/powerpc/Kconfig.debug linux-libre-5.12.8-gnu/arch/powerpc/Kconfig.debug
index ae084357994e..6342f9da4545 100644
--- linux-libre-5.12-gnu/arch/powerpc/Kconfig.debug
+++ linux-libre-5.12.8-gnu/arch/powerpc/Kconfig.debug
@@ -353,6 +353,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR
 config FAIL_IOMMU
 	bool "Fault-injection capability for IOMMU"
 	depends on FAULT_INJECTION
+	depends on PCI || IBMVIO
 	help
 	  Provide fault-injection capability for IOMMU. Each device can
 	  be selectively enabled via the fail_iommu property.
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
index 058601efbc8a..b703330459b8 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -7,6 +7,7 @@
 #ifndef __ASSEMBLY__
 #include <linux/mmdebug.h>
 #include <linux/bug.h>
+#include <linux/sizes.h>
 #endif
 
 /*
@@ -323,7 +324,8 @@ extern unsigned long pci_io_base;
 #define  PHB_IO_END	(KERN_IO_START + FULL_IO_SIZE)
 #define IOREMAP_BASE	(PHB_IO_END)
 #define IOREMAP_START	(ioremap_bot)
-#define IOREMAP_END	(KERN_IO_END)
+#define IOREMAP_END	(KERN_IO_END - FIXADDR_SIZE)
+#define FIXADDR_SIZE	SZ_32M
 
 /* Advertise special mapping type for AGP */
 #define HAVE_PAGE_AGP
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/book3s/64/radix.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/book3s/64/radix.h
index c7813dc628fc..59cab558e2f0 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/book3s/64/radix.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/book3s/64/radix.h
@@ -222,8 +222,10 @@ static inline void radix__set_pte_at(struct mm_struct *mm, unsigned long addr,
 	 * from ptesync, it should probably go into update_mmu_cache, rather
 	 * than set_pte_at (which is used to set ptes unrelated to faults).
 	 *
-	 * Spurious faults to vmalloc region are not tolerated, so there is
-	 * a ptesync in flush_cache_vmap.
+	 * Spurious faults from the kernel memory are not tolerated, so there
+	 * is a ptesync in flush_cache_vmap, and __map_kernel_page() follows
+	 * the pte update sequence from ISA Book III 6.10 Translation Table
+	 * Update Synchronization Requirements.
 	 */
 }
 
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/fixmap.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/fixmap.h
index 8d03c16a3663..947b5b9c4424 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/fixmap.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/fixmap.h
@@ -23,12 +23,17 @@
 #include <asm/kmap_size.h>
 #endif
 
+#ifdef CONFIG_PPC64
+#define FIXADDR_TOP	(IOREMAP_END + FIXADDR_SIZE)
+#else
+#define FIXADDR_SIZE	0
 #ifdef CONFIG_KASAN
 #include <asm/kasan.h>
 #define FIXADDR_TOP	(KASAN_SHADOW_START - PAGE_SIZE)
 #else
 #define FIXADDR_TOP	((unsigned long)(-PAGE_SIZE))
 #endif
+#endif
 
 /*
  * Here we define all the compile-time 'special' virtual
@@ -50,6 +55,7 @@
  */
 enum fixed_addresses {
 	FIX_HOLE,
+#ifdef CONFIG_PPC32
 	/* reserve the top 128K for early debugging purposes */
 	FIX_EARLY_DEBUG_TOP = FIX_HOLE,
 	FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+(ALIGN(SZ_128K, PAGE_SIZE)/PAGE_SIZE)-1,
@@ -72,6 +78,7 @@ enum fixed_addresses {
 		       FIX_IMMR_SIZE,
 #endif
 	/* FIX_PCIE_MCFG, */
+#endif /* CONFIG_PPC32 */
 	__end_of_permanent_fixed_addresses,
 
 #define NR_FIX_BTMAPS		(SZ_256K / PAGE_SIZE)
@@ -98,6 +105,8 @@ enum fixed_addresses {
 static inline void __set_fixmap(enum fixed_addresses idx,
 				phys_addr_t phys, pgprot_t flags)
 {
+	BUILD_BUG_ON(IS_ENABLED(CONFIG_PPC64) && __FIXADDR_SIZE > FIXADDR_SIZE);
+
 	if (__builtin_constant_p(idx))
 		BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
 	else if (WARN_ON(idx >= __end_of_fixed_addresses))
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/hvcall.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/hvcall.h
index ed6086d57b22..0c92b01a3c3c 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/hvcall.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/hvcall.h
@@ -446,6 +446,9 @@
  */
 long plpar_hcall_norets(unsigned long opcode, ...);
 
+/* Variant which does not do hcall tracing */
+long plpar_hcall_norets_notrace(unsigned long opcode, ...);
+
 /**
  * plpar_hcall: - Make a pseries hypervisor call
  * @opcode: The hypervisor call to make.
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/interrupt.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/interrupt.h
index e8d09a841373..31ed5356590a 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/interrupt.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/interrupt.h
@@ -138,6 +138,13 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte
 	local_paca->irq_soft_mask = IRQS_ALL_DISABLED;
 	local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
 
+	if (IS_ENABLED(CONFIG_PPC_BOOK3S_64) && !(regs->msr & MSR_PR) &&
+				regs->nip < (unsigned long)__end_interrupts) {
+		// Kernel code running below __end_interrupts is
+		// implicitly soft-masked.
+		regs->softe = IRQS_ALL_DISABLED;
+	}
+
 	/* Don't do any per-CPU operations until interrupt state is fixed */
 #endif
 	/* Allow DEC and PMI to be traced when they are soft-NMI */
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/mmu_context.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/mmu_context.h
index 652ce85f9410..4bc45d3ed8b0 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/mmu_context.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/mmu_context.h
@@ -263,7 +263,7 @@ extern void arch_exit_mmap(struct mm_struct *mm);
 static inline void arch_unmap(struct mm_struct *mm,
 			      unsigned long start, unsigned long end)
 {
-	unsigned long vdso_base = (unsigned long)mm->context.vdso - PAGE_SIZE;
+	unsigned long vdso_base = (unsigned long)mm->context.vdso;
 
 	if (start <= vdso_base && vdso_base < end)
 		mm->context.vdso = NULL;
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/nohash/64/pgtable.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/nohash/64/pgtable.h
index 6cb8aa357191..57cd3892bfe0 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -6,6 +6,8 @@
  * the ppc64 non-hashed page table.
  */
 
+#include <linux/sizes.h>
+
 #include <asm/nohash/64/pgtable-4k.h>
 #include <asm/barrier.h>
 #include <asm/asm-const.h>
@@ -54,7 +56,8 @@
 #define  PHB_IO_END	(KERN_IO_START + FULL_IO_SIZE)
 #define IOREMAP_BASE	(PHB_IO_END)
 #define IOREMAP_START	(ioremap_bot)
-#define IOREMAP_END	(KERN_VIRT_START + KERN_VIRT_SIZE)
+#define IOREMAP_END	(KERN_VIRT_START + KERN_VIRT_SIZE - FIXADDR_SIZE)
+#define FIXADDR_SIZE	SZ_32M
 
 
 /*
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/paravirt.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/paravirt.h
index 5d1726bb28e7..bcb7b5f917be 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/paravirt.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/paravirt.h
@@ -28,19 +28,35 @@ static inline u32 yield_count_of(int cpu)
 	return be32_to_cpu(yield_count);
 }
 
+/*
+ * Spinlock code confers and prods, so don't trace the hcalls because the
+ * tracing code takes spinlocks which can cause recursion deadlocks.
+ *
+ * These calls are made while the lock is not held: the lock slowpath yields if
+ * it can not acquire the lock, and unlock slow path might prod if a waiter has
+ * yielded). So this may not be a problem for simple spin locks because the
+ * tracing does not technically recurse on the lock, but we avoid it anyway.
+ *
+ * However the queued spin lock contended path is more strictly ordered: the
+ * H_CONFER hcall is made after the task has queued itself on the lock, so then
+ * recursing on that lock will cause the task to then queue up again behind the
+ * first instance (or worse: queued spinlocks use tricks that assume a context
+ * never waits on more than one spinlock, so such recursion may cause random
+ * corruption in the lock code).
+ */
 static inline void yield_to_preempted(int cpu, u32 yield_count)
 {
-	plpar_hcall_norets(H_CONFER, get_hard_smp_processor_id(cpu), yield_count);
+	plpar_hcall_norets_notrace(H_CONFER, get_hard_smp_processor_id(cpu), yield_count);
 }
 
 static inline void prod_cpu(int cpu)
 {
-	plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
+	plpar_hcall_norets_notrace(H_PROD, get_hard_smp_processor_id(cpu));
 }
 
 static inline void yield_to_any(void)
 {
-	plpar_hcall_norets(H_CONFER, -1, 0);
+	plpar_hcall_norets_notrace(H_CONFER, -1, 0);
 }
 #else
 static inline bool is_shared_processor(void)
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/ptrace.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/ptrace.h
index 1499e928ea6a..5d8d397e928a 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/ptrace.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/ptrace.h
@@ -19,6 +19,7 @@
 #ifndef _ASM_POWERPC_PTRACE_H
 #define _ASM_POWERPC_PTRACE_H
 
+#include <linux/err.h>
 #include <uapi/asm/ptrace.h>
 #include <asm/asm-const.h>
 
@@ -152,25 +153,6 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 long do_syscall_trace_enter(struct pt_regs *regs);
 void do_syscall_trace_leave(struct pt_regs *regs);
 
-#define kernel_stack_pointer(regs) ((regs)->gpr[1])
-static inline int is_syscall_success(struct pt_regs *regs)
-{
-	return !(regs->ccr & 0x10000000);
-}
-
-static inline long regs_return_value(struct pt_regs *regs)
-{
-	if (is_syscall_success(regs))
-		return regs->gpr[3];
-	else
-		return -regs->gpr[3];
-}
-
-static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
-{
-	regs->gpr[3] = rc;
-}
-
 #ifdef __powerpc64__
 #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
 #else
@@ -252,6 +234,31 @@ static inline void set_trap_norestart(struct pt_regs *regs)
 	regs->trap |= 0x10;
 }
 
+#define kernel_stack_pointer(regs) ((regs)->gpr[1])
+static inline int is_syscall_success(struct pt_regs *regs)
+{
+	if (trap_is_scv(regs))
+		return !IS_ERR_VALUE((unsigned long)regs->gpr[3]);
+	else
+		return !(regs->ccr & 0x10000000);
+}
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	if (trap_is_scv(regs))
+		return regs->gpr[3];
+
+	if (is_syscall_success(regs))
+		return regs->gpr[3];
+	else
+		return -regs->gpr[3];
+}
+
+static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
+{
+	regs->gpr[3] = rc;
+}
+
 #define arch_has_single_step()	(1)
 #define arch_has_block_step()	(true)
 #define ARCH_HAS_USER_SINGLE_STEP_REPORT
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/reg.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/reg.h
index da103e92c112..37d0b8c76a59 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/reg.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/reg.h
@@ -441,6 +441,7 @@
 #define   LPCR_VRMA_LP1		ASM_CONST(0x0000800000000000)
 #define   LPCR_RMLS		0x1C000000	/* Implementation dependent RMO limit sel */
 #define   LPCR_RMLS_SH		26
+#define   LPCR_HAIL		ASM_CONST(0x0000000004000000)   /* HV AIL (ISAv3.1) */
 #define   LPCR_ILE		ASM_CONST(0x0000000002000000)   /* !HV irqs set MSR:LE */
 #define   LPCR_AIL		ASM_CONST(0x0000000001800000)	/* Alternate interrupt location */
 #define   LPCR_AIL_0		ASM_CONST(0x0000000000000000)	/* MMU off exception offset 0x0 */
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/smp.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/smp.h
index 7a13bc20f0a0..47081a9e13ca 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/smp.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/smp.h
@@ -121,6 +121,11 @@ static inline struct cpumask *cpu_sibling_mask(int cpu)
 	return per_cpu(cpu_sibling_map, cpu);
 }
 
+static inline struct cpumask *cpu_core_mask(int cpu)
+{
+	return per_cpu(cpu_core_map, cpu);
+}
+
 static inline struct cpumask *cpu_l2_cache_mask(int cpu)
 {
 	return per_cpu(cpu_l2_cache_map, cpu);
diff --git linux-libre-5.12-gnu/arch/powerpc/include/asm/syscall.h linux-libre-5.12.8-gnu/arch/powerpc/include/asm/syscall.h
index fd1b518eed17..ba0f88f3a30d 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/asm/syscall.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/asm/syscall.h
@@ -41,11 +41,17 @@ static inline void syscall_rollback(struct task_struct *task,
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	/*
-	 * If the system call failed,
-	 * regs->gpr[3] contains a positive ERRORCODE.
-	 */
-	return (regs->ccr & 0x10000000UL) ? -regs->gpr[3] : 0;
+	if (trap_is_scv(regs)) {
+		unsigned long error = regs->gpr[3];
+
+		return IS_ERR_VALUE(error) ? error : 0;
+	} else {
+		/*
+		 * If the system call failed,
+		 * regs->gpr[3] contains a positive ERRORCODE.
+		 */
+		return (regs->ccr & 0x10000000UL) ? -regs->gpr[3] : 0;
+	}
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -58,18 +64,22 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	/*
-	 * In the general case it's not obvious that we must deal with CCR
-	 * here, as the syscall exit path will also do that for us. However
-	 * there are some places, eg. the signal code, which check ccr to
-	 * decide if the value in r3 is actually an error.
-	 */
-	if (error) {
-		regs->ccr |= 0x10000000L;
-		regs->gpr[3] = error;
+	if (trap_is_scv(regs)) {
+		regs->gpr[3] = (long) error ?: val;
 	} else {
-		regs->ccr &= ~0x10000000L;
-		regs->gpr[3] = val;
+		/*
+		 * In the general case it's not obvious that we must deal with
+		 * CCR here, as the syscall exit path will also do that for us.
+		 * However there are some places, eg. the signal code, which
+		 * check ccr to decide if the value in r3 is actually an error.
+		 */
+		if (error) {
+			regs->ccr |= 0x10000000L;
+			regs->gpr[3] = error;
+		} else {
+			regs->ccr &= ~0x10000000L;
+			regs->gpr[3] = val;
+		}
 	}
 }
 
diff --git linux-libre-5.12-gnu/arch/powerpc/include/uapi/asm/errno.h linux-libre-5.12.8-gnu/arch/powerpc/include/uapi/asm/errno.h
index cc79856896a1..4ba87de32be0 100644
--- linux-libre-5.12-gnu/arch/powerpc/include/uapi/asm/errno.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/include/uapi/asm/errno.h
@@ -2,6 +2,7 @@
 #ifndef _ASM_POWERPC_ERRNO_H
 #define _ASM_POWERPC_ERRNO_H
 
+#undef	EDEADLOCK
 #include <asm-generic/errno.h>
 
 #undef	EDEADLOCK
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/eeh.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/eeh.c
index cd60bc1c8701..7040e430a124 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/eeh.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/eeh.c
@@ -362,14 +362,11 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
 	pa = pte_pfn(*ptep);
 
 	/* On radix we can do hugepage mappings for io, so handle that */
-	if (hugepage_shift) {
-		pa <<= hugepage_shift;
-		pa |= token & ((1ul << hugepage_shift) - 1);
-	} else {
-		pa <<= PAGE_SHIFT;
-		pa |= token & (PAGE_SIZE - 1);
-	}
+	if (!hugepage_shift)
+		hugepage_shift = PAGE_SHIFT;
 
+	pa <<= PAGE_SHIFT;
+	pa |= token & ((1ul << hugepage_shift) - 1);
 	return pa;
 }
 
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/fadump.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/fadump.c
index 8482739d42f3..eddf362caedc 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/fadump.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/fadump.c
@@ -292,7 +292,7 @@ static void fadump_show_config(void)
  * that is required for a kernel to boot successfully.
  *
  */
-static inline u64 fadump_calculate_reserve_size(void)
+static __init u64 fadump_calculate_reserve_size(void)
 {
 	u64 base, size, bootmem_min;
 	int ret;
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/head_32.h linux-libre-5.12.8-gnu/arch/powerpc/kernel/head_32.h
index 5d4706c14572..cf8ca08295bf 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/head_32.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/head_32.h
@@ -261,11 +261,7 @@ label:
 	lis	r1, emergency_ctx@ha
 #endif
 	lwz	r1, emergency_ctx@l(r1)
-	cmpwi	cr1, r1, 0
-	bne	cr1, 1f
-	lis	r1, init_thread_union@ha
-	addi	r1, r1, init_thread_union@l
-1:	addi	r1, r1, THREAD_SIZE - INT_FRAME_SIZE
+	addi	r1, r1, THREAD_SIZE - INT_FRAME_SIZE
 	EXCEPTION_PROLOG_2
 	SAVE_NVGPRS(r11)
 	addi	r3, r1, STACK_FRAME_OVERHEAD
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/interrupt.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/interrupt.c
index c475a229a42a..352346e14a08 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/interrupt.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/interrupt.c
@@ -34,11 +34,11 @@ notrace long system_call_exception(long r3, long r4, long r5,
 	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
 		BUG_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
 
+	trace_hardirqs_off(); /* finish reconciling */
+
 	CT_WARN_ON(ct_state() == CONTEXT_KERNEL);
 	user_exit_irqoff();
 
-	trace_hardirqs_off(); /* finish reconciling */
-
 	if (!IS_ENABLED(CONFIG_BOOKE) && !IS_ENABLED(CONFIG_40x))
 		BUG_ON(!(regs->msr & MSR_RI));
 	BUG_ON(!(regs->msr & MSR_PR));
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/iommu.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/iommu.c
index c00214a4355c..4023f91defa6 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/iommu.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/iommu.c
@@ -1096,7 +1096,7 @@ int iommu_take_ownership(struct iommu_table *tbl)
 
 	spin_lock_irqsave(&tbl->large_pool.lock, flags);
 	for (i = 0; i < tbl->nr_pools; i++)
-		spin_lock(&tbl->pools[i].lock);
+		spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
 
 	iommu_table_release_pages(tbl);
 
@@ -1124,7 +1124,7 @@ void iommu_release_ownership(struct iommu_table *tbl)
 
 	spin_lock_irqsave(&tbl->large_pool.lock, flags);
 	for (i = 0; i < tbl->nr_pools; i++)
-		spin_lock(&tbl->pools[i].lock);
+		spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
 
 	memset(tbl->it_map, 0, sz);
 
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/prom.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/prom.c
index 9a4797d1d40d..a8b2d6bfc1ca 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/prom.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/prom.c
@@ -267,7 +267,7 @@ static struct feature_property {
 };
 
 #if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
-static inline void identical_pvr_fixup(unsigned long node)
+static __init void identical_pvr_fixup(unsigned long node)
 {
 	unsigned int pvr;
 	const char *model = of_get_flat_dt_prop(node, "model", NULL);
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/setup_32.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/setup_32.c
index 8ba49a6bf515..d7c1f92152af 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/setup_32.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/setup_32.c
@@ -164,7 +164,7 @@ void __init irqstack_early_init(void)
 }
 
 #ifdef CONFIG_VMAP_STACK
-void *emergency_ctx[NR_CPUS] __ro_after_init;
+void *emergency_ctx[NR_CPUS] __ro_after_init = {[0] = &init_stack};
 
 void __init emergency_stack_init(void)
 {
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/setup_64.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/setup_64.c
index 560ed8b975e7..c914fe8a2c67 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/setup_64.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/setup_64.c
@@ -232,10 +232,23 @@ static void cpu_ready_for_interrupts(void)
 	 * If we are not in hypervisor mode the job is done once for
 	 * the whole partition in configure_exceptions().
 	 */
-	if (cpu_has_feature(CPU_FTR_HVMODE) &&
-	    cpu_has_feature(CPU_FTR_ARCH_207S)) {
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		unsigned long lpcr = mfspr(SPRN_LPCR);
-		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
+		unsigned long new_lpcr = lpcr;
+
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			/* P10 DD1 does not have HAIL */
+			if (pvr_version_is(PVR_POWER10) &&
+					(mfspr(SPRN_PVR) & 0xf00) == 0x100)
+				new_lpcr |= LPCR_AIL_3;
+			else
+				new_lpcr |= LPCR_HAIL;
+		} else if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+			new_lpcr |= LPCR_AIL_3;
+		}
+
+		if (new_lpcr != lpcr)
+			mtspr(SPRN_LPCR, new_lpcr);
 	}
 
 	/*
@@ -356,11 +369,11 @@ void __init early_setup(unsigned long dt_ptr)
 	apply_feature_fixups();
 	setup_feature_keys();
 
-	early_ioremap_setup();
-
 	/* Initialize the hash table or TLB handling */
 	early_init_mmu();
 
+	early_ioremap_setup();
+
 	/*
 	 * After firmware and early platform setup code has set things up,
 	 * we note the SPR values for configurable control/performance
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/smp.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/smp.c
index 5a4d59a1070d..c2473e20f5f5 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/smp.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/smp.c
@@ -1057,17 +1057,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 				local_memory_node(numa_cpu_lookup_table[cpu]));
 		}
 #endif
-		/*
-		 * cpu_core_map is now more updated and exists only since
-		 * its been exported for long. It only will have a snapshot
-		 * of cpu_cpu_mask.
-		 */
-		cpumask_copy(per_cpu(cpu_core_map, cpu), cpu_cpu_mask(cpu));
 	}
 
 	/* Init the cpumasks so the boot CPU is related to itself */
 	cpumask_set_cpu(boot_cpuid, cpu_sibling_mask(boot_cpuid));
 	cpumask_set_cpu(boot_cpuid, cpu_l2_cache_mask(boot_cpuid));
+	cpumask_set_cpu(boot_cpuid, cpu_core_mask(boot_cpuid));
 
 	if (has_coregroup_support())
 		cpumask_set_cpu(boot_cpuid, cpu_coregroup_mask(boot_cpuid));
@@ -1408,6 +1403,9 @@ static void remove_cpu_from_masks(int cpu)
 			set_cpus_unrelated(cpu, i, cpu_smallcore_mask);
 	}
 
+	for_each_cpu(i, cpu_core_mask(cpu))
+		set_cpus_unrelated(cpu, i, cpu_core_mask);
+
 	if (has_coregroup_support()) {
 		for_each_cpu(i, cpu_coregroup_mask(cpu))
 			set_cpus_unrelated(cpu, i, cpu_coregroup_mask);
@@ -1468,8 +1466,11 @@ static void update_coregroup_mask(int cpu, cpumask_var_t *mask)
 
 static void add_cpu_to_masks(int cpu)
 {
+	struct cpumask *(*submask_fn)(int) = cpu_sibling_mask;
 	int first_thread = cpu_first_thread_sibling(cpu);
+	int chip_id = cpu_to_chip_id(cpu);
 	cpumask_var_t mask;
+	bool ret;
 	int i;
 
 	/*
@@ -1485,12 +1486,36 @@ static void add_cpu_to_masks(int cpu)
 	add_cpu_to_smallcore_masks(cpu);
 
 	/* In CPU-hotplug path, hence use GFP_ATOMIC */
-	alloc_cpumask_var_node(&mask, GFP_ATOMIC, cpu_to_node(cpu));
+	ret = alloc_cpumask_var_node(&mask, GFP_ATOMIC, cpu_to_node(cpu));
 	update_mask_by_l2(cpu, &mask);
 
 	if (has_coregroup_support())
 		update_coregroup_mask(cpu, &mask);
 
+	if (chip_id == -1 || !ret) {
+		cpumask_copy(per_cpu(cpu_core_map, cpu), cpu_cpu_mask(cpu));
+		goto out;
+	}
+
+	if (shared_caches)
+		submask_fn = cpu_l2_cache_mask;
+
+	/* Update core_mask with all the CPUs that are part of submask */
+	or_cpumasks_related(cpu, cpu, submask_fn, cpu_core_mask);
+
+	/* Skip all CPUs already part of current CPU core mask */
+	cpumask_andnot(mask, cpu_online_mask, cpu_core_mask(cpu));
+
+	for_each_cpu(i, mask) {
+		if (chip_id == cpu_to_chip_id(i)) {
+			or_cpumasks_related(cpu, i, submask_fn, cpu_core_mask);
+			cpumask_andnot(mask, mask, submask_fn(i));
+		} else {
+			cpumask_andnot(mask, mask, cpu_core_mask(i));
+		}
+	}
+
+out:
 	free_cpumask_var(mask);
 }
 
@@ -1521,6 +1546,9 @@ void start_secondary(void *unused)
 
 	vdso_getcpu_init();
 #endif
+	set_numa_node(numa_cpu_lookup_table[cpu]);
+	set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
+
 	/* Update topology CPU masks */
 	add_cpu_to_masks(cpu);
 
@@ -1539,9 +1567,6 @@ void start_secondary(void *unused)
 			shared_caches = true;
 	}
 
-	set_numa_node(numa_cpu_lookup_table[cpu]);
-	set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
-
 	smp_wmb();
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
diff --git linux-libre-5.12-gnu/arch/powerpc/kernel/vdso.c linux-libre-5.12.8-gnu/arch/powerpc/kernel/vdso.c
index e839a906fdf2..b14907209822 100644
--- linux-libre-5.12-gnu/arch/powerpc/kernel/vdso.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kernel/vdso.c
@@ -55,10 +55,10 @@ static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struc
 {
 	unsigned long new_size = new_vma->vm_end - new_vma->vm_start;
 
-	if (new_size != text_size + PAGE_SIZE)
+	if (new_size != text_size)
 		return -EINVAL;
 
-	current->mm->context.vdso = (void __user *)new_vma->vm_start + PAGE_SIZE;
+	current->mm->context.vdso = (void __user *)new_vma->vm_start;
 
 	return 0;
 }
@@ -73,6 +73,10 @@ static int vdso64_mremap(const struct vm_special_mapping *sm, struct vm_area_str
 	return vdso_mremap(sm, new_vma, &vdso64_end - &vdso64_start);
 }
 
+static struct vm_special_mapping vvar_spec __ro_after_init = {
+	.name = "[vvar]",
+};
+
 static struct vm_special_mapping vdso32_spec __ro_after_init = {
 	.name = "[vdso]",
 	.mremap = vdso32_mremap,
@@ -89,11 +93,11 @@ static struct vm_special_mapping vdso64_spec __ro_after_init = {
  */
 static int __arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 {
-	struct mm_struct *mm = current->mm;
+	unsigned long vdso_size, vdso_base, mappings_size;
 	struct vm_special_mapping *vdso_spec;
+	unsigned long vvar_size = PAGE_SIZE;
+	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
-	unsigned long vdso_size;
-	unsigned long vdso_base;
 
 	if (is_32bit_task()) {
 		vdso_spec = &vdso32_spec;
@@ -110,8 +114,8 @@ static int __arch_setup_additional_pages(struct linux_binprm *bprm, int uses_int
 		vdso_base = 0;
 	}
 
-	/* Add a page to the vdso size for the data page */
-	vdso_size += PAGE_SIZE;
+	mappings_size = vdso_size + vvar_size;
+	mappings_size += (VDSO_ALIGNMENT - 1) & PAGE_MASK;
 
 	/*
 	 * pick a base address for the vDSO in process space. We try to put it
@@ -119,9 +123,7 @@ static int __arch_setup_additional_pages(struct linux_binprm *bprm, int uses_int
 	 * and end up putting it elsewhere.
 	 * Add enough to the size so that the result can be aligned.
 	 */
-	vdso_base = get_unmapped_area(NULL, vdso_base,
-				      vdso_size + ((VDSO_ALIGNMENT - 1) & PAGE_MASK),
-				      0, 0);
+	vdso_base = get_unmapped_area(NULL, vdso_base, mappings_size, 0, 0);
 	if (IS_ERR_VALUE(vdso_base))
 		return vdso_base;
 
@@ -133,7 +135,13 @@ static int __arch_setup_additional_pages(struct linux_binprm *bprm, int uses_int
 	 * install_special_mapping or the perf counter mmap tracking code
 	 * will fail to recognise it as a vDSO.
 	 */
-	mm->context.vdso = (void __user *)vdso_base + PAGE_SIZE;
+	mm->context.vdso = (void __user *)vdso_base + vvar_size;
+
+	vma = _install_special_mapping(mm, vdso_base, vvar_size,
+				       VM_READ | VM_MAYREAD | VM_IO |
+				       VM_DONTDUMP | VM_PFNMAP, &vvar_spec);
+	if (IS_ERR(vma))
+		return PTR_ERR(vma);
 
 	/*
 	 * our vma flags don't have VM_WRITE so by default, the process isn't
@@ -145,9 +153,12 @@ static int __arch_setup_additional_pages(struct linux_binprm *bprm, int uses_int
 	 * It's fine to use that for setting breakpoints in the vDSO code
 	 * pages though.
 	 */
-	vma = _install_special_mapping(mm, vdso_base, vdso_size,
+	vma = _install_special_mapping(mm, vdso_base + vvar_size, vdso_size,
 				       VM_READ | VM_EXEC | VM_MAYREAD |
 				       VM_MAYWRITE | VM_MAYEXEC, vdso_spec);
+	if (IS_ERR(vma))
+		do_munmap(mm, vdso_base, vvar_size, NULL);
+
 	return PTR_ERR_OR_ZERO(vma);
 }
 
@@ -249,11 +260,22 @@ static struct page ** __init vdso_setup_pages(void *start, void *end)
 	if (!pagelist)
 		panic("%s: Cannot allocate page list for VDSO", __func__);
 
-	pagelist[0] = virt_to_page(vdso_data);
-
 	for (i = 0; i < pages; i++)
-		pagelist[i + 1] = virt_to_page(start + i * PAGE_SIZE);
+		pagelist[i] = virt_to_page(start + i * PAGE_SIZE);
+
+	return pagelist;
+}
+
+static struct page ** __init vvar_setup_pages(void)
+{
+	struct page **pagelist;
 
+	/* .pages is NULL-terminated */
+	pagelist = kcalloc(2, sizeof(struct page *), GFP_KERNEL);
+	if (!pagelist)
+		panic("%s: Cannot allocate page list for VVAR", __func__);
+
+	pagelist[0] = virt_to_page(vdso_data);
 	return pagelist;
 }
 
@@ -295,6 +317,8 @@ static int __init vdso_init(void)
 	if (IS_ENABLED(CONFIG_PPC64))
 		vdso64_spec.pages = vdso_setup_pages(&vdso64_start, &vdso64_end);
 
+	vvar_spec.pages = vvar_setup_pages();
+
 	smp_wmb();
 
 	return 0;
diff --git linux-libre-5.12-gnu/arch/powerpc/kexec/file_load_64.c linux-libre-5.12.8-gnu/arch/powerpc/kexec/file_load_64.c
index 02b9e4d0dc40..a8a7cb71086b 100644
--- linux-libre-5.12-gnu/arch/powerpc/kexec/file_load_64.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kexec/file_load_64.c
@@ -960,6 +960,93 @@ unsigned int kexec_fdt_totalsize_ppc64(struct kimage *image)
 	return fdt_size;
 }
 
+/**
+ * add_node_props - Reads node properties from device node structure and add
+ *                  them to fdt.
+ * @fdt:            Flattened device tree of the kernel
+ * @node_offset:    offset of the node to add a property at
+ * @dn:             device node pointer
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
+{
+	int ret = 0;
+	struct property *pp;
+
+	if (!dn)
+		return -EINVAL;
+
+	for_each_property_of_node(dn, pp) {
+		ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
+		if (ret < 0) {
+			pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * update_cpus_node - Update cpus node of flattened device tree using of_root
+ *                    device node.
+ * @fdt:              Flattened device tree of the kernel.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int update_cpus_node(void *fdt)
+{
+	struct device_node *cpus_node, *dn;
+	int cpus_offset, cpus_subnode_offset, ret = 0;
+
+	cpus_offset = fdt_path_offset(fdt, "/cpus");
+	if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
+		pr_err("Malformed device tree: error reading /cpus node: %s\n",
+		       fdt_strerror(cpus_offset));
+		return cpus_offset;
+	}
+
+	if (cpus_offset > 0) {
+		ret = fdt_del_node(fdt, cpus_offset);
+		if (ret < 0) {
+			pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
+			return -EINVAL;
+		}
+	}
+
+	/* Add cpus node to fdt */
+	cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
+	if (cpus_offset < 0) {
+		pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
+		return -EINVAL;
+	}
+
+	/* Add cpus node properties */
+	cpus_node = of_find_node_by_path("/cpus");
+	ret = add_node_props(fdt, cpus_offset, cpus_node);
+	of_node_put(cpus_node);
+	if (ret < 0)
+		return ret;
+
+	/* Loop through all subnodes of cpus and add them to fdt */
+	for_each_node_by_type(dn, "cpu") {
+		cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
+		if (cpus_subnode_offset < 0) {
+			pr_err("Unable to add %s subnode: %s\n", dn->full_name,
+			       fdt_strerror(cpus_subnode_offset));
+			ret = cpus_subnode_offset;
+			goto out;
+		}
+
+		ret = add_node_props(fdt, cpus_subnode_offset, dn);
+		if (ret < 0)
+			goto out;
+	}
+out:
+	of_node_put(dn);
+	return ret;
+}
+
 /**
  * setup_new_fdt_ppc64 - Update the flattend device-tree of the kernel
  *                       being loaded.
@@ -1020,6 +1107,11 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
 		}
 	}
 
+	/* Update cpus nodes information to account hotplug CPUs. */
+	ret =  update_cpus_node(fdt);
+	if (ret < 0)
+		goto out;
+
 	/* Update memory reserve map */
 	ret = get_reserved_memory_ranges(&rmem);
 	if (ret)
diff --git linux-libre-5.12-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c linux-libre-5.12.8-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c
index e452158a18d7..c3e31fef0be1 100644
--- linux-libre-5.12-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <linux/pkeys.h>
 
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
@@ -133,6 +134,7 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte,
 	else
 		kvmppc_mmu_flush_icache(pfn);
 
+	rflags |= pte_to_hpte_pkey_bits(0, HPTE_USE_KERNEL_KEY);
 	rflags = (rflags & ~HPTE_R_WIMG) | orig_pte->wimg;
 
 	/*
diff --git linux-libre-5.12-gnu/arch/powerpc/kvm/book3s_hv.c linux-libre-5.12.8-gnu/arch/powerpc/kvm/book3s_hv.c
index 13bad6bf4c95..208a053c9adf 100644
--- linux-libre-5.12-gnu/arch/powerpc/kvm/book3s_hv.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/kvm/book3s_hv.c
@@ -3728,7 +3728,10 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
 	vcpu->arch.dec_expires = dec + tb;
 	vcpu->cpu = -1;
 	vcpu->arch.thread_cpu = -1;
+	/* Save guest CTRL register, set runlatch to 1 */
 	vcpu->arch.ctrl = mfspr(SPRN_CTRLF);
+	if (!(vcpu->arch.ctrl & 1))
+		mtspr(SPRN_CTRLT, vcpu->arch.ctrl | 1);
 
 	vcpu->arch.iamr = mfspr(SPRN_IAMR);
 	vcpu->arch.pspb = mfspr(SPRN_PSPB);
diff --git linux-libre-5.12-gnu/arch/powerpc/lib/Makefile linux-libre-5.12.8-gnu/arch/powerpc/lib/Makefile
index d4efc182662a..248f7c9e36fc 100644
--- linux-libre-5.12-gnu/arch/powerpc/lib/Makefile
+++ linux-libre-5.12.8-gnu/arch/powerpc/lib/Makefile
@@ -5,6 +5,9 @@
 
 ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_TOC)
 
+CFLAGS_code-patching.o += -fno-stack-protector
+CFLAGS_feature-fixups.o += -fno-stack-protector
+
 CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
 
diff --git linux-libre-5.12-gnu/arch/powerpc/lib/feature-fixups.c linux-libre-5.12.8-gnu/arch/powerpc/lib/feature-fixups.c
index 1fd31b4b0e13..0aefa6a4a259 100644
--- linux-libre-5.12-gnu/arch/powerpc/lib/feature-fixups.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/lib/feature-fixups.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/sched/mm.h>
+#include <linux/stop_machine.h>
 #include <asm/cputable.h>
 #include <asm/code-patching.h>
 #include <asm/page.h>
@@ -227,11 +228,25 @@ static void do_stf_exit_barrier_fixups(enum stf_barrier_type types)
 		                                           : "unknown");
 }
 
+static int __do_stf_barrier_fixups(void *data)
+{
+	enum stf_barrier_type *types = data;
+
+	do_stf_entry_barrier_fixups(*types);
+	do_stf_exit_barrier_fixups(*types);
+
+	return 0;
+}
 
 void do_stf_barrier_fixups(enum stf_barrier_type types)
 {
-	do_stf_entry_barrier_fixups(types);
-	do_stf_exit_barrier_fixups(types);
+	/*
+	 * The call to the fallback entry flush, and the fallback/sync-ori exit
+	 * flush can not be safely patched in/out while other CPUs are executing
+	 * them. So call __do_stf_barrier_fixups() on one CPU while all other CPUs
+	 * spin in the stop machine core with interrupts hard disabled.
+	 */
+	stop_machine(__do_stf_barrier_fixups, &types, NULL);
 }
 
 void do_uaccess_flush_fixups(enum l1d_flush_type types)
@@ -284,8 +299,9 @@ void do_uaccess_flush_fixups(enum l1d_flush_type types)
 						: "unknown");
 }
 
-void do_entry_flush_fixups(enum l1d_flush_type types)
+static int __do_entry_flush_fixups(void *data)
 {
+	enum l1d_flush_type types = *(enum l1d_flush_type *)data;
 	unsigned int instrs[3], *dest;
 	long *start, *end;
 	int i;
@@ -354,6 +370,19 @@ void do_entry_flush_fixups(enum l1d_flush_type types)
 							: "ori type" :
 		(types &  L1D_FLUSH_MTTRIG)     ? "mttrig type"
 						: "unknown");
+
+	return 0;
+}
+
+void do_entry_flush_fixups(enum l1d_flush_type types)
+{
+	/*
+	 * The call to the fallback flush can not be safely patched in/out while
+	 * other CPUs are executing it. So call __do_entry_flush_fixups() on one
+	 * CPU while all other CPUs spin in the stop machine core with interrupts
+	 * hard disabled.
+	 */
+	stop_machine(__do_entry_flush_fixups, &types, NULL);
 }
 
 void do_rfi_flush_fixups(enum l1d_flush_type types)
diff --git linux-libre-5.12-gnu/arch/powerpc/mm/book3s64/hash_pgtable.c linux-libre-5.12.8-gnu/arch/powerpc/mm/book3s64/hash_pgtable.c
index 567e0c6b3978..03819c259f0a 100644
--- linux-libre-5.12-gnu/arch/powerpc/mm/book3s64/hash_pgtable.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/mm/book3s64/hash_pgtable.c
@@ -428,12 +428,14 @@ static bool hash__change_memory_range(unsigned long start, unsigned long end,
 
 void hash__mark_rodata_ro(void)
 {
-	unsigned long start, end;
+	unsigned long start, end, pp;
 
 	start = (unsigned long)_stext;
 	end = (unsigned long)__init_begin;
 
-	WARN_ON(!hash__change_memory_range(start, end, PP_RXXX));
+	pp = htab_convert_pte_flags(pgprot_val(PAGE_KERNEL_ROX), HPTE_USE_KERNEL_KEY);
+
+	WARN_ON(!hash__change_memory_range(start, end, pp));
 }
 
 void hash__mark_initmem_nx(void)
diff --git linux-libre-5.12-gnu/arch/powerpc/mm/book3s64/hash_utils.c linux-libre-5.12.8-gnu/arch/powerpc/mm/book3s64/hash_utils.c
index 581b20a2feaf..12de1906e97b 100644
--- linux-libre-5.12-gnu/arch/powerpc/mm/book3s64/hash_utils.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/mm/book3s64/hash_utils.c
@@ -338,7 +338,7 @@ repeat:
 int htab_remove_mapping(unsigned long vstart, unsigned long vend,
 		      int psize, int ssize)
 {
-	unsigned long vaddr;
+	unsigned long vaddr, time_limit;
 	unsigned int step, shift;
 	int rc;
 	int ret = 0;
@@ -351,8 +351,19 @@ int htab_remove_mapping(unsigned long vstart, unsigned long vend,
 
 	/* Unmap the full range specificied */
 	vaddr = ALIGN_DOWN(vstart, step);
+	time_limit = jiffies + HZ;
+
 	for (;vaddr < vend; vaddr += step) {
 		rc = mmu_hash_ops.hpte_removebolted(vaddr, psize, ssize);
+
+		/*
+		 * For large number of mappings introduce a cond_resched()
+		 * to prevent softlockup warnings.
+		 */
+		if (time_after(jiffies, time_limit)) {
+			cond_resched();
+			time_limit = jiffies + HZ;
+		}
 		if (rc == -ENOENT) {
 			ret = -ENOENT;
 			continue;
@@ -1545,10 +1556,10 @@ DEFINE_INTERRUPT_HANDLER_RET(__do_hash_fault)
 	if (user_mode(regs) || (region_id == USER_REGION_ID))
 		access &= ~_PAGE_PRIVILEGED;
 
-	if (regs->trap == 0x400)
+	if (TRAP(regs) == 0x400)
 		access |= _PAGE_EXEC;
 
-	err = hash_page_mm(mm, ea, access, regs->trap, flags);
+	err = hash_page_mm(mm, ea, access, TRAP(regs), flags);
 	if (unlikely(err < 0)) {
 		// failed to instert a hash PTE due to an hypervisor error
 		if (user_mode(regs)) {
diff --git linux-libre-5.12-gnu/arch/powerpc/mm/book3s64/radix_pgtable.c linux-libre-5.12.8-gnu/arch/powerpc/mm/book3s64/radix_pgtable.c
index 98f0b243c1ab..39d488a212a0 100644
--- linux-libre-5.12-gnu/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -108,7 +108,7 @@ static int early_map_kernel_page(unsigned long ea, unsigned long pa,
 
 set_the_pte:
 	set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
-	smp_wmb();
+	asm volatile("ptesync": : :"memory");
 	return 0;
 }
 
@@ -168,7 +168,7 @@ static int __map_kernel_page(unsigned long ea, unsigned long pa,
 
 set_the_pte:
 	set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
-	smp_wmb();
+	asm volatile("ptesync": : :"memory");
 	return 0;
 }
 
diff --git linux-libre-5.12-gnu/arch/powerpc/mm/mem.c linux-libre-5.12.8-gnu/arch/powerpc/mm/mem.c
index 4e8ce6d85232..7a59a5c9aa5d 100644
--- linux-libre-5.12-gnu/arch/powerpc/mm/mem.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/mm/mem.c
@@ -54,7 +54,6 @@
 
 #include <mm/mmu_decl.h>
 
-static DEFINE_MUTEX(linear_mapping_mutex);
 unsigned long long memory_limit;
 bool init_mem_is_free;
 
@@ -72,6 +71,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 EXPORT_SYMBOL(phys_mem_access_prot);
 
 #ifdef CONFIG_MEMORY_HOTPLUG
+static DEFINE_MUTEX(linear_mapping_mutex);
 
 #ifdef CONFIG_NUMA
 int memory_add_physaddr_to_nid(u64 start)
diff --git linux-libre-5.12-gnu/arch/powerpc/perf/isa207-common.c linux-libre-5.12.8-gnu/arch/powerpc/perf/isa207-common.c
index e4f577da33d8..8b5eeb6fb2fb 100644
--- linux-libre-5.12-gnu/arch/powerpc/perf/isa207-common.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/perf/isa207-common.c
@@ -447,8 +447,8 @@ ebb_bhrb:
 	 * EBB events are pinned & exclusive, so this should never actually
 	 * hit, but we leave it as a fallback in case.
 	 */
-	mask  |= CNST_EBB_VAL(ebb);
-	value |= CNST_EBB_MASK;
+	mask  |= CNST_EBB_MASK;
+	value |= CNST_EBB_VAL(ebb);
 
 	*maskp = mask;
 	*valp = value;
diff --git linux-libre-5.12-gnu/arch/powerpc/perf/power10-events-list.h linux-libre-5.12.8-gnu/arch/powerpc/perf/power10-events-list.h
index e45dafe818ed..93be7197d250 100644
--- linux-libre-5.12-gnu/arch/powerpc/perf/power10-events-list.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/perf/power10-events-list.h
@@ -75,5 +75,5 @@ EVENT(PM_RUN_INST_CMPL_ALT,			0x00002);
  *     thresh end (TE)
  */
 
-EVENT(MEM_LOADS,				0x34340401e0);
-EVENT(MEM_STORES,				0x343c0401e0);
+EVENT(MEM_LOADS,				0x35340401e0);
+EVENT(MEM_STORES,				0x353c0401e0);
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/52xx/lite5200_sleep.S linux-libre-5.12.8-gnu/arch/powerpc/platforms/52xx/lite5200_sleep.S
index 11475c58ea43..afee8b1515a8 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/52xx/lite5200_sleep.S
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/52xx/lite5200_sleep.S
@@ -181,7 +181,7 @@ sram_code:
   udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
 	mullw	r12, r12, r11
 	mftb	r13	/* start */
-	addi	r12, r13, r12 /* end */
+	add	r12, r13, r12 /* end */
     1:
 	mftb	r13	/* current */
 	cmp	cr0, r13, r12
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/powernv/memtrace.c linux-libre-5.12.8-gnu/arch/powerpc/platforms/powernv/memtrace.c
index 019669eb21d2..4ab7c3ef5826 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/powernv/memtrace.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/powernv/memtrace.c
@@ -88,8 +88,8 @@ static void memtrace_clear_range(unsigned long start_pfn,
 	 * Before we go ahead and use this range as cache inhibited range
 	 * flush the cache.
 	 */
-	flush_dcache_range_chunked(PFN_PHYS(start_pfn),
-				   PFN_PHYS(start_pfn + nr_pages),
+	flush_dcache_range_chunked((unsigned long)pfn_to_kaddr(start_pfn),
+				   (unsigned long)pfn_to_kaddr(start_pfn + nr_pages),
 				   FLUSH_CHUNK_SIZE);
 }
 
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/hotplug-cpu.c linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 12cbffd3c2e3..325f3b220f36 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -47,9 +47,6 @@ static void rtas_stop_self(void)
 
 	BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE);
 
-	printk("cpu %u (hwid %u) Ready to die...\n",
-	       smp_processor_id(), hard_smp_processor_id());
-
 	rtas_call_unlocked(&args, rtas_stop_self_token, 0, 1, NULL);
 
 	panic("Alas, I survived.\n");
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/hvCall.S linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/hvCall.S
index 2136e42833af..8a2b8d64265b 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/hvCall.S
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/hvCall.S
@@ -102,6 +102,16 @@ END_FTR_SECTION(0, 1);						\
 #define HCALL_BRANCH(LABEL)
 #endif
 
+_GLOBAL_TOC(plpar_hcall_norets_notrace)
+	HMT_MEDIUM
+
+	mfcr	r0
+	stw	r0,8(r1)
+	HVSC				/* invoke the hypervisor */
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+	blr				/* return r3 = status */
+
 _GLOBAL_TOC(plpar_hcall_norets)
 	HMT_MEDIUM
 
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/iommu.c linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/iommu.c
index 9fc5217f0c8e..836cbbe0ecc5 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/iommu.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/iommu.c
@@ -1229,7 +1229,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	if (pmem_present) {
 		if (query.largest_available_block >=
 		    (1ULL << (MAX_PHYSMEM_BITS - page_shift)))
-			len = MAX_PHYSMEM_BITS - page_shift;
+			len = MAX_PHYSMEM_BITS;
 		else
 			dev_info(&dev->dev, "Skipping ibm,pmemory");
 	}
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/lpar.c linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/lpar.c
index 3805519a6469..d4aa6a46e1fa 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/lpar.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/lpar.c
@@ -977,11 +977,13 @@ static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
 	slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
 	BUG_ON(slot == -1);
 
-	flags = newpp & 7;
+	flags = newpp & (HPTE_R_PP | HPTE_R_N);
 	if (mmu_has_feature(MMU_FTR_KERNEL_RO))
 		/* Move pp0 into bit 8 (IBM 55) */
 		flags |= (newpp & HPTE_R_PP0) >> 55;
 
+	flags |= ((newpp & HPTE_R_KEY_HI) >> 48) | (newpp & HPTE_R_KEY_LO);
+
 	lpar_rc = plpar_pte_protect(flags, slot, 0);
 
 	BUG_ON(lpar_rc != H_SUCCESS);
@@ -1828,8 +1830,7 @@ void hcall_tracepoint_unregfunc(void)
 
 /*
  * Since the tracing code might execute hcalls we need to guard against
- * recursion. One example of this are spinlocks calling H_YIELD on
- * shared processor partitions.
+ * recursion.
  */
 static DEFINE_PER_CPU(unsigned int, hcall_trace_depth);
 
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c
index f9ae17e8a0f4..a8f9140a24fa 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -50,6 +50,7 @@ EXPORT_SYMBOL_GPL(init_phb_dynamic);
 int remove_phb_dynamic(struct pci_controller *phb)
 {
 	struct pci_bus *b = phb->bus;
+	struct pci_host_bridge *host_bridge = to_pci_host_bridge(b->bridge);
 	struct resource *res;
 	int rc, i;
 
@@ -76,7 +77,8 @@ int remove_phb_dynamic(struct pci_controller *phb)
 	/* Remove the PCI bus and unregister the bridge device from sysfs */
 	phb->bus = NULL;
 	pci_remove_bus(b);
-	device_unregister(b->bridge);
+	host_bridge->bus = NULL;
+	device_unregister(&host_bridge->dev);
 
 	/* Now release the IO resource */
 	if (res->flags & IORESOURCE_IO)
diff --git linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/vio.c linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/vio.c
index 9cb4fc839fd5..429053d0402a 100644
--- linux-libre-5.12-gnu/arch/powerpc/platforms/pseries/vio.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/platforms/pseries/vio.c
@@ -1285,6 +1285,10 @@ static int vio_bus_remove(struct device *dev)
 int __vio_register_driver(struct vio_driver *viodrv, struct module *owner,
 			  const char *mod_name)
 {
+	// vio_bus_type is only initialised for pseries
+	if (!machine_is(pseries))
+		return -ENODEV;
+
 	pr_debug("%s: driver %s registering\n", __func__, viodrv->name);
 
 	/* fill in 'struct driver' fields */
diff --git linux-libre-5.12-gnu/arch/powerpc/sysdev/xive/common.c linux-libre-5.12.8-gnu/arch/powerpc/sysdev/xive/common.c
index 595310e056f4..31b657c37735 100644
--- linux-libre-5.12-gnu/arch/powerpc/sysdev/xive/common.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/sysdev/xive/common.c
@@ -253,17 +253,20 @@ notrace void xmon_xive_do_dump(int cpu)
 	xmon_printf("\n");
 }
 
+static struct irq_data *xive_get_irq_data(u32 hw_irq)
+{
+	unsigned int irq = irq_find_mapping(xive_irq_domain, hw_irq);
+
+	return irq ? irq_get_irq_data(irq) : NULL;
+}
+
 int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
 {
-	struct irq_chip *chip = irq_data_get_irq_chip(d);
 	int rc;
 	u32 target;
 	u8 prio;
 	u32 lirq;
 
-	if (!is_xive_irq(chip))
-		return -EINVAL;
-
 	rc = xive_ops->get_irq_config(hw_irq, &target, &prio, &lirq);
 	if (rc) {
 		xmon_printf("IRQ 0x%08x : no config rc=%d\n", hw_irq, rc);
@@ -273,6 +276,9 @@ int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
 	xmon_printf("IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
 		    hw_irq, target, prio, lirq);
 
+	if (!d)
+		d = xive_get_irq_data(hw_irq);
+
 	if (d) {
 		struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
 		u64 val = xive_esb_read(xd, XIVE_ESB_GET);
@@ -1335,17 +1341,14 @@ static int xive_prepare_cpu(unsigned int cpu)
 
 	xc = per_cpu(xive_cpu, cpu);
 	if (!xc) {
-		struct device_node *np;
-
 		xc = kzalloc_node(sizeof(struct xive_cpu),
 				  GFP_KERNEL, cpu_to_node(cpu));
 		if (!xc)
 			return -ENOMEM;
-		np = of_get_cpu_node(cpu, NULL);
-		if (np)
-			xc->chip_id = of_get_ibm_chip_id(np);
-		of_node_put(np);
 		xc->hw_ipi = XIVE_BAD_IRQ;
+		xc->chip_id = XIVE_INVALID_CHIP_ID;
+		if (xive_ops->prepare_cpu)
+			xive_ops->prepare_cpu(cpu, xc);
 
 		per_cpu(xive_cpu, cpu) = xc;
 	}
@@ -1599,6 +1602,8 @@ static void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data
 	u32 target;
 	u8 prio;
 	u32 lirq;
+	struct xive_irq_data *xd;
+	u64 val;
 
 	if (!is_xive_irq(chip))
 		return;
@@ -1612,17 +1617,14 @@ static void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data
 	seq_printf(m, "IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
 		   hw_irq, target, prio, lirq);
 
-	if (d) {
-		struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
-		u64 val = xive_esb_read(xd, XIVE_ESB_GET);
-
-		seq_printf(m, "flags=%c%c%c PQ=%c%c",
-			   xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
-			   xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
-			   xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
-			   val & XIVE_ESB_VAL_P ? 'P' : '-',
-			   val & XIVE_ESB_VAL_Q ? 'Q' : '-');
-	}
+	xd = irq_data_get_irq_handler_data(d);
+	val = xive_esb_read(xd, XIVE_ESB_GET);
+	seq_printf(m, "flags=%c%c%c PQ=%c%c",
+		   xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
+		   xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
+		   xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
+		   val & XIVE_ESB_VAL_P ? 'P' : '-',
+		   val & XIVE_ESB_VAL_Q ? 'Q' : '-');
 	seq_puts(m, "\n");
 }
 
diff --git linux-libre-5.12-gnu/arch/powerpc/sysdev/xive/native.c linux-libre-5.12.8-gnu/arch/powerpc/sysdev/xive/native.c
index 05a800a3104e..57e3f1540435 100644
--- linux-libre-5.12-gnu/arch/powerpc/sysdev/xive/native.c
+++ linux-libre-5.12.8-gnu/arch/powerpc/sysdev/xive/native.c
@@ -380,6 +380,11 @@ static void xive_native_update_pending(struct xive_cpu *xc)
 	}
 }
 
+static void xive_native_prepare_cpu(unsigned int cpu, struct xive_cpu *xc)
+{
+	xc->chip_id = cpu_to_chip_id(cpu);
+}
+
 static void xive_native_setup_cpu(unsigned int cpu, struct xive_cpu *xc)
 {
 	s64 rc;
@@ -462,6 +467,7 @@ static const struct xive_ops xive_native_ops = {
 	.match			= xive_native_match,
 	.shutdown		= xive_native_shutdown,
 	.update_pending		= xive_native_update_pending,
+	.prepare_cpu		= xive_native_prepare_cpu,
 	.setup_cpu		= xive_native_setup_cpu,
 	.teardown_cpu		= xive_native_teardown_cpu,
 	.sync_source		= xive_native_sync_source,
diff --git linux-libre-5.12-gnu/arch/powerpc/sysdev/xive/xive-internal.h linux-libre-5.12.8-gnu/arch/powerpc/sysdev/xive/xive-internal.h
index 9cf57c722faa..6478be19b4d3 100644
--- linux-libre-5.12-gnu/arch/powerpc/sysdev/xive/xive-internal.h
+++ linux-libre-5.12.8-gnu/arch/powerpc/sysdev/xive/xive-internal.h
@@ -46,6 +46,7 @@ struct xive_ops {
 				  u32 *sw_irq);
 	int	(*setup_queue)(unsigned int cpu, struct xive_cpu *xc, u8 prio);
 	void	(*cleanup_queue)(unsigned int cpu, struct xive_cpu *xc, u8 prio);
+	void	(*prepare_cpu)(unsigned int cpu, struct xive_cpu *xc);
 	void	(*setup_cpu)(unsigned int cpu, struct xive_cpu *xc);
 	void	(*teardown_cpu)(unsigned int cpu, struct xive_cpu *xc);
 	bool	(*match)(struct device_node *np);
diff --git linux-libre-5.12-gnu/arch/riscv/Kconfig linux-libre-5.12.8-gnu/arch/riscv/Kconfig
index 4515a10c5d22..d9522fc35ca5 100644
--- linux-libre-5.12-gnu/arch/riscv/Kconfig
+++ linux-libre-5.12.8-gnu/arch/riscv/Kconfig
@@ -227,7 +227,7 @@ config ARCH_RV64I
 	bool "RV64I"
 	select 64BIT
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && GCC_VERSION >= 50000
-	select HAVE_DYNAMIC_FTRACE if MMU
+	select HAVE_DYNAMIC_FTRACE if MMU && $(cc-option,-fpatchable-function-entry=8)
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
diff --git linux-libre-5.12-gnu/arch/riscv/include/asm/ftrace.h linux-libre-5.12.8-gnu/arch/riscv/include/asm/ftrace.h
index 845002cc2e57..04dad3380041 100644
--- linux-libre-5.12-gnu/arch/riscv/include/asm/ftrace.h
+++ linux-libre-5.12.8-gnu/arch/riscv/include/asm/ftrace.h
@@ -13,9 +13,19 @@
 #endif
 #define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
 
+/*
+ * Clang prior to 13 had "mcount" instead of "_mcount":
+ * https://reviews.llvm.org/D98881
+ */
+#if defined(CONFIG_CC_IS_GCC) || CONFIG_CLANG_VERSION >= 130000
+#define MCOUNT_NAME _mcount
+#else
+#define MCOUNT_NAME mcount
+#endif
+
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #ifndef __ASSEMBLY__
-void _mcount(void);
+void MCOUNT_NAME(void);
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
 	return addr;
@@ -36,7 +46,7 @@ struct dyn_arch_ftrace {
  * both auipc and jalr at the same time.
  */
 
-#define MCOUNT_ADDR		((unsigned long)_mcount)
+#define MCOUNT_ADDR		((unsigned long)MCOUNT_NAME)
 #define JALR_SIGN_MASK		(0x00000800)
 #define JALR_OFFSET_MASK	(0x00000fff)
 #define AUIPC_OFFSET_MASK	(0xfffff000)
diff --git linux-libre-5.12-gnu/arch/riscv/kernel/mcount.S linux-libre-5.12.8-gnu/arch/riscv/kernel/mcount.S
index 8a5593ff9ff3..6d462681c9c0 100644
--- linux-libre-5.12-gnu/arch/riscv/kernel/mcount.S
+++ linux-libre-5.12.8-gnu/arch/riscv/kernel/mcount.S
@@ -47,8 +47,8 @@
 
 ENTRY(ftrace_stub)
 #ifdef CONFIG_DYNAMIC_FTRACE
-       .global _mcount
-       .set    _mcount, ftrace_stub
+       .global MCOUNT_NAME
+       .set    MCOUNT_NAME, ftrace_stub
 #endif
 	ret
 ENDPROC(ftrace_stub)
@@ -78,7 +78,7 @@ ENDPROC(return_to_handler)
 #endif
 
 #ifndef CONFIG_DYNAMIC_FTRACE
-ENTRY(_mcount)
+ENTRY(MCOUNT_NAME)
 	la	t4, ftrace_stub
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	la	t0, ftrace_graph_return
@@ -124,6 +124,6 @@ do_trace:
 	jalr	t5
 	RESTORE_ABI_STATE
 	ret
-ENDPROC(_mcount)
+ENDPROC(MCOUNT_NAME)
 #endif
-EXPORT_SYMBOL(_mcount)
+EXPORT_SYMBOL(MCOUNT_NAME)
diff --git linux-libre-5.12-gnu/arch/riscv/kernel/probes/kprobes.c linux-libre-5.12.8-gnu/arch/riscv/kernel/probes/kprobes.c
index 7e2c78e2ca6b..d71f7c49a721 100644
--- linux-libre-5.12-gnu/arch/riscv/kernel/probes/kprobes.c
+++ linux-libre-5.12.8-gnu/arch/riscv/kernel/probes/kprobes.c
@@ -260,8 +260,10 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr)
 
 		if (kcb->kprobe_status == KPROBE_REENTER)
 			restore_previous_kprobe(kcb);
-		else
+		else {
+			kprobes_restore_local_irqflag(kcb, regs);
 			reset_current_kprobe();
+		}
 
 		break;
 	case KPROBE_HIT_ACTIVE:
diff --git linux-libre-5.12-gnu/arch/riscv/kernel/smp.c linux-libre-5.12.8-gnu/arch/riscv/kernel/smp.c
index ea028d9e0d24..d44567490d91 100644
--- linux-libre-5.12-gnu/arch/riscv/kernel/smp.c
+++ linux-libre-5.12.8-gnu/arch/riscv/kernel/smp.c
@@ -54,7 +54,7 @@ int riscv_hartid_to_cpuid(int hartid)
 			return i;
 
 	pr_err("Couldn't find cpu id for hartid [%d]\n", hartid);
-	return i;
+	return -ENOENT;
 }
 
 void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
diff --git linux-libre-5.12-gnu/arch/riscv/kernel/vdso/Makefile linux-libre-5.12.8-gnu/arch/riscv/kernel/vdso/Makefile
index 71a315e73cbe..ca2b40dfd24b 100644
--- linux-libre-5.12-gnu/arch/riscv/kernel/vdso/Makefile
+++ linux-libre-5.12.8-gnu/arch/riscv/kernel/vdso/Makefile
@@ -41,11 +41,10 @@ KASAN_SANITIZE := n
 $(obj)/vdso.o: $(obj)/vdso.so
 
 # link rule for the .so file, .lds has to be first
-SYSCFLAGS_vdso.so.dbg = $(c_flags)
 $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
-SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
-	-Wl,--build-id=sha1 -Wl,--hash-style=both
+LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
+	--build-id=sha1 --hash-style=both --eh-frame-hdr
 
 # We also create a special relocatable object that should mirror the symbol
 # table and layout of the linked DSO. With ld --just-symbols we can then
@@ -60,13 +59,10 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
 
 # actual build commands
 # The DSO images are built using a special linker script
-# Add -lgcc so rv32 gets static muldi3 and lshrdi3 definitions.
 # Make sure only to export the intended __vdso_xxx symbol offsets.
 quiet_cmd_vdsold = VDSOLD  $@
-      cmd_vdsold = $(CC) $(KBUILD_CFLAGS) $(call cc-option, -no-pie) -nostdlib -nostartfiles $(SYSCFLAGS_$(@F)) \
-                           -Wl,-T,$(filter-out FORCE,$^) -o $@.tmp && \
-                   $(CROSS_COMPILE)objcopy \
-                           $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \
+      cmd_vdsold = $(LD) $(ld_flags) -T $(filter-out FORCE,$^) -o $@.tmp && \
+                   $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \
                    rm $@.tmp
 
 # Extracts symbol offsets from the VDSO, converting them into an assembly file
diff --git linux-libre-5.12-gnu/arch/s390/crypto/arch_random.c linux-libre-5.12.8-gnu/arch/s390/crypto/arch_random.c
index 7b947728d57e..56007c763902 100644
--- linux-libre-5.12-gnu/arch/s390/crypto/arch_random.c
+++ linux-libre-5.12.8-gnu/arch/s390/crypto/arch_random.c
@@ -54,6 +54,10 @@ static DECLARE_DELAYED_WORK(arch_rng_work, arch_rng_refill_buffer);
 
 bool s390_arch_random_generate(u8 *buf, unsigned int nbytes)
 {
+	/* max hunk is ARCH_RNG_BUF_SIZE */
+	if (nbytes > ARCH_RNG_BUF_SIZE)
+		return false;
+
 	/* lock rng buffer */
 	if (!spin_trylock(&arch_rng_lock))
 		return false;
diff --git linux-libre-5.12-gnu/arch/s390/include/asm/qdio.h linux-libre-5.12.8-gnu/arch/s390/include/asm/qdio.h
index d9215c7106f0..8fc52679543d 100644
--- linux-libre-5.12-gnu/arch/s390/include/asm/qdio.h
+++ linux-libre-5.12.8-gnu/arch/s390/include/asm/qdio.h
@@ -246,21 +246,8 @@ struct slsb {
 	u8 val[QDIO_MAX_BUFFERS_PER_Q];
 } __attribute__ ((packed, aligned(256)));
 
-/**
- * struct qdio_outbuf_state - SBAL related asynchronous operation information
- *   (for communication with upper layer programs)
- *   (only required for use with completion queues)
- * @user: pointer to upper layer program's state information related to SBAL
- *        (stored in user1 data of QAOB)
- */
-struct qdio_outbuf_state {
-	void *user;
-};
-
-#define CHSC_AC1_INITIATE_INPUTQ	0x80
-
-
 /* qdio adapter-characteristics-1 flag */
+#define CHSC_AC1_INITIATE_INPUTQ	0x80
 #define AC1_SIGA_INPUT_NEEDED		0x40	/* process input queues */
 #define AC1_SIGA_OUTPUT_NEEDED		0x20	/* process output queues */
 #define AC1_SIGA_SYNC_NEEDED		0x10	/* ask hypervisor to sync */
@@ -338,7 +325,6 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
  * @int_parm: interruption parameter
  * @input_sbal_addr_array:  per-queue array, each element points to 128 SBALs
  * @output_sbal_addr_array: per-queue array, each element points to 128 SBALs
- * @output_sbal_state_array: no_output_qs * 128 state info (for CQ or NULL)
  */
 struct qdio_initialize {
 	unsigned char q_format;
@@ -357,7 +343,6 @@ struct qdio_initialize {
 	unsigned long int_parm;
 	struct qdio_buffer ***input_sbal_addr_array;
 	struct qdio_buffer ***output_sbal_addr_array;
-	struct qdio_outbuf_state *output_sbal_state_array;
 };
 
 #define QDIO_STATE_INACTIVE		0x00000002 /* after qdio_cleanup */
@@ -378,9 +363,10 @@ extern int qdio_allocate(struct ccw_device *cdev, unsigned int no_input_qs,
 extern int qdio_establish(struct ccw_device *cdev,
 			  struct qdio_initialize *init_data);
 extern int qdio_activate(struct ccw_device *);
+extern struct qaob *qdio_allocate_aob(void);
 extern void qdio_release_aob(struct qaob *);
-extern int do_QDIO(struct ccw_device *, unsigned int, int, unsigned int,
-		   unsigned int);
+extern int do_QDIO(struct ccw_device *cdev, unsigned int callflags, int q_nr,
+		   unsigned int bufnr, unsigned int count, struct qaob *aob);
 extern int qdio_sta