diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/arm/mm/mmu.c linux-libre-5.3.14-gnu/arch/arm/mm/mmu.c
--- linux-libre-5.3.13-gnu/arch/arm/mm/mmu.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/arm/mm/mmu.c	2019-11-29 04:08:31.000000000 -0500
@@ -1197,6 +1197,9 @@ void __init adjust_lowmem_bounds(void)
 		phys_addr_t block_start = reg->base;
 		phys_addr_t block_end = reg->base + reg->size;
 
+		if (memblock_is_nomap(reg))
+			continue;
+
 		if (reg->base < vmalloc_limit) {
 			if (block_end > lowmem_limit)
 				/*
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/powerpc/include/asm/asm-prototypes.h linux-libre-5.3.14-gnu/arch/powerpc/include/asm/asm-prototypes.h
--- linux-libre-5.3.13-gnu/arch/powerpc/include/asm/asm-prototypes.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/powerpc/include/asm/asm-prototypes.h	2019-11-29 04:08:31.000000000 -0500
@@ -140,9 +140,12 @@ void _kvmppc_save_tm_pr(struct kvm_vcpu
 /* Patch sites */
 extern s32 patch__call_flush_count_cache;
 extern s32 patch__flush_count_cache_return;
+extern s32 patch__flush_link_stack_return;
+extern s32 patch__call_kvm_flush_link_stack;
 extern s32 patch__memset_nocache, patch__memcpy_nocache;
 
 extern long flush_count_cache;
+extern long kvm_flush_link_stack;
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 void kvmppc_save_tm_hv(struct kvm_vcpu *vcpu, u64 msr, bool preserve_nv);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/powerpc/include/asm/security_features.h linux-libre-5.3.14-gnu/arch/powerpc/include/asm/security_features.h
--- linux-libre-5.3.13-gnu/arch/powerpc/include/asm/security_features.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/powerpc/include/asm/security_features.h	2019-11-29 04:08:31.000000000 -0500
@@ -81,6 +81,9 @@ static inline bool security_ftr_enabled(
 // Software required to flush count cache on context switch
 #define SEC_FTR_FLUSH_COUNT_CACHE	0x0000000000000400ull
 
+// Software required to flush link stack on context switch
+#define SEC_FTR_FLUSH_LINK_STACK	0x0000000000001000ull
+
 
 // Features enabled by default
 #define SEC_FTR_DEFAULT \
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/powerpc/kernel/entry_64.S linux-libre-5.3.14-gnu/arch/powerpc/kernel/entry_64.S
--- linux-libre-5.3.13-gnu/arch/powerpc/kernel/entry_64.S	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/powerpc/kernel/entry_64.S	2019-11-29 04:08:31.000000000 -0500
@@ -546,6 +546,7 @@ flush_count_cache:
 	/* Save LR into r9 */
 	mflr	r9
 
+	// Flush the link stack
 	.rept 64
 	bl	.+4
 	.endr
@@ -555,6 +556,11 @@ flush_count_cache:
 	.balign 32
 	/* Restore LR */
 1:	mtlr	r9
+
+	// If we're just flushing the link stack, return here
+3:	nop
+	patch_site 3b patch__flush_link_stack_return
+
 	li	r9,0x7fff
 	mtctr	r9
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/powerpc/kernel/security.c linux-libre-5.3.14-gnu/arch/powerpc/kernel/security.c
--- linux-libre-5.3.13-gnu/arch/powerpc/kernel/security.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/powerpc/kernel/security.c	2019-11-29 04:08:31.000000000 -0500
@@ -24,11 +24,12 @@ enum count_cache_flush_type {
 	COUNT_CACHE_FLUSH_HW	= 0x4,
 };
 static enum count_cache_flush_type count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
+static bool link_stack_flush_enabled;
 
 bool barrier_nospec_enabled;
 static bool no_nospec;
 static bool btb_flush_enabled;
-#ifdef CONFIG_PPC_FSL_BOOK3E
+#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_BOOK3S_64)
 static bool no_spectrev2;
 #endif
 
@@ -114,7 +115,7 @@ static __init int security_feature_debug
 device_initcall(security_feature_debugfs_init);
 #endif /* CONFIG_DEBUG_FS */
 
-#ifdef CONFIG_PPC_FSL_BOOK3E
+#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_BOOK3S_64)
 static int __init handle_nospectre_v2(char *p)
 {
 	no_spectrev2 = true;
@@ -122,6 +123,9 @@ static int __init handle_nospectre_v2(ch
 	return 0;
 }
 early_param("nospectre_v2", handle_nospectre_v2);
+#endif /* CONFIG_PPC_FSL_BOOK3E || CONFIG_PPC_BOOK3S_64 */
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
 void setup_spectre_v2(void)
 {
 	if (no_spectrev2 || cpu_mitigations_off())
@@ -209,11 +213,19 @@ ssize_t cpu_show_spectre_v2(struct devic
 
 		if (ccd)
 			seq_buf_printf(&s, "Indirect branch cache disabled");
+
+		if (link_stack_flush_enabled)
+			seq_buf_printf(&s, ", Software link stack flush");
+
 	} else if (count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) {
 		seq_buf_printf(&s, "Mitigation: Software count cache flush");
 
 		if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW)
 			seq_buf_printf(&s, " (hardware accelerated)");
+
+		if (link_stack_flush_enabled)
+			seq_buf_printf(&s, ", Software link stack flush");
+
 	} else if (btb_flush_enabled) {
 		seq_buf_printf(&s, "Mitigation: Branch predictor state flush");
 	} else {
@@ -374,18 +386,49 @@ static __init int stf_barrier_debugfs_in
 device_initcall(stf_barrier_debugfs_init);
 #endif /* CONFIG_DEBUG_FS */
 
+static void no_count_cache_flush(void)
+{
+	count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
+	pr_info("count-cache-flush: software flush disabled.\n");
+}
+
 static void toggle_count_cache_flush(bool enable)
 {
-	if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
+	if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE) &&
+	    !security_ftr_enabled(SEC_FTR_FLUSH_LINK_STACK))
+		enable = false;
+
+	if (!enable) {
 		patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP);
-		count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
-		pr_info("count-cache-flush: software flush disabled.\n");
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+		patch_instruction_site(&patch__call_kvm_flush_link_stack, PPC_INST_NOP);
+#endif
+		pr_info("link-stack-flush: software flush disabled.\n");
+		link_stack_flush_enabled = false;
+		no_count_cache_flush();
 		return;
 	}
 
+	// This enables the branch from _switch to flush_count_cache
 	patch_branch_site(&patch__call_flush_count_cache,
 			  (u64)&flush_count_cache, BRANCH_SET_LINK);
 
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	// This enables the branch from guest_exit_cont to kvm_flush_link_stack
+	patch_branch_site(&patch__call_kvm_flush_link_stack,
+			  (u64)&kvm_flush_link_stack, BRANCH_SET_LINK);
+#endif
+
+	pr_info("link-stack-flush: software flush enabled.\n");
+	link_stack_flush_enabled = true;
+
+	// If we just need to flush the link stack, patch an early return
+	if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
+		patch_instruction_site(&patch__flush_link_stack_return, PPC_INST_BLR);
+		no_count_cache_flush();
+		return;
+	}
+
 	if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) {
 		count_cache_flush_type = COUNT_CACHE_FLUSH_SW;
 		pr_info("count-cache-flush: full software flush sequence enabled.\n");
@@ -399,7 +442,26 @@ static void toggle_count_cache_flush(boo
 
 void setup_count_cache_flush(void)
 {
-	toggle_count_cache_flush(true);
+	bool enable = true;
+
+	if (no_spectrev2 || cpu_mitigations_off()) {
+		if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) ||
+		    security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED))
+			pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n");
+
+		enable = false;
+	}
+
+	/*
+	 * There's no firmware feature flag/hypervisor bit to tell us we need to
+	 * flush the link stack on context switch. So we set it here if we see
+	 * either of the Spectre v2 mitigations that aim to protect userspace.
+	 */
+	if (security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED) ||
+	    security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE))
+		security_ftr_set(SEC_FTR_FLUSH_LINK_STACK);
+
+	toggle_count_cache_flush(enable);
 }
 
 #ifdef CONFIG_DEBUG_FS
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/powerpc/kvm/book3s_hv_rmhandlers.S linux-libre-5.3.14-gnu/arch/powerpc/kvm/book3s_hv_rmhandlers.S
--- linux-libre-5.3.13-gnu/arch/powerpc/kvm/book3s_hv_rmhandlers.S	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/powerpc/kvm/book3s_hv_rmhandlers.S	2019-11-29 04:08:31.000000000 -0500
@@ -11,6 +11,7 @@
  */
 
 #include <asm/ppc_asm.h>
+#include <asm/code-patching-asm.h>
 #include <asm/kvm_asm.h>
 #include <asm/reg.h>
 #include <asm/mmu.h>
@@ -1458,6 +1459,13 @@ guest_exit_cont:		/* r9 = vcpu, r12 = tr
 1:
 #endif /* CONFIG_KVM_XICS */
 
+	/*
+	 * Possibly flush the link stack here, before we do a blr in
+	 * guest_exit_short_path.
+	 */
+1:	nop
+	patch_site 1b patch__call_kvm_flush_link_stack
+
 	/* If we came in through the P9 short path, go back out to C now */
 	lwz	r0, STACK_SLOT_SHORT_PATH(r1)
 	cmpwi	r0, 0
@@ -1933,6 +1941,28 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 	mtlr	r0
 	blr
 
+.balign 32
+.global kvm_flush_link_stack
+kvm_flush_link_stack:
+	/* Save LR into r0 */
+	mflr	r0
+
+	/* Flush the link stack. On Power8 it's up to 32 entries in size. */
+	.rept 32
+	bl	.+4
+	.endr
+
+	/* And on Power9 it's up to 64. */
+BEGIN_FTR_SECTION
+	.rept 32
+	bl	.+4
+	.endr
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
+	/* Restore LR */
+	mtlr	r0
+	blr
+
 kvmppc_guest_external:
 	/* External interrupt, first check for host_ipi. If this is
 	 * set, we know the host wants us out so let's do it now
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/entry/entry_32.S linux-libre-5.3.14-gnu/arch/x86/entry/entry_32.S
--- linux-libre-5.3.13-gnu/arch/x86/entry/entry_32.S	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/entry/entry_32.S	2019-11-29 04:08:31.000000000 -0500
@@ -172,7 +172,7 @@
 	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
 	.if \no_user_check == 0
 	/* coming from usermode? */
-	testl	$SEGMENT_RPL_MASK, PT_CS(%esp)
+	testl	$USER_SEGMENT_RPL_MASK, PT_CS(%esp)
 	jz	.Lend_\@
 	.endif
 	/* On user-cr3? */
@@ -205,64 +205,76 @@
 #define CS_FROM_ENTRY_STACK	(1 << 31)
 #define CS_FROM_USER_CR3	(1 << 30)
 #define CS_FROM_KERNEL		(1 << 29)
+#define CS_FROM_ESPFIX		(1 << 28)
 
 .macro FIXUP_FRAME
 	/*
 	 * The high bits of the CS dword (__csh) are used for CS_FROM_*.
 	 * Clear them in case hardware didn't do this for us.
 	 */
-	andl	$0x0000ffff, 3*4(%esp)
+	andl	$0x0000ffff, 4*4(%esp)
 
 #ifdef CONFIG_VM86
-	testl	$X86_EFLAGS_VM, 4*4(%esp)
+	testl	$X86_EFLAGS_VM, 5*4(%esp)
 	jnz	.Lfrom_usermode_no_fixup_\@
 #endif
-	testl	$SEGMENT_RPL_MASK, 3*4(%esp)
+	testl	$USER_SEGMENT_RPL_MASK, 4*4(%esp)
 	jnz	.Lfrom_usermode_no_fixup_\@
 
-	orl	$CS_FROM_KERNEL, 3*4(%esp)
+	orl	$CS_FROM_KERNEL, 4*4(%esp)
 
 	/*
 	 * When we're here from kernel mode; the (exception) stack looks like:
 	 *
-	 *  5*4(%esp) - <previous context>
-	 *  4*4(%esp) - flags
-	 *  3*4(%esp) - cs
-	 *  2*4(%esp) - ip
-	 *  1*4(%esp) - orig_eax
-	 *  0*4(%esp) - gs / function
+	 *  6*4(%esp) - <previous context>
+	 *  5*4(%esp) - flags
+	 *  4*4(%esp) - cs
+	 *  3*4(%esp) - ip
+	 *  2*4(%esp) - orig_eax
+	 *  1*4(%esp) - gs / function
+	 *  0*4(%esp) - fs
 	 *
 	 * Lets build a 5 entry IRET frame after that, such that struct pt_regs
 	 * is complete and in particular regs->sp is correct. This gives us
-	 * the original 5 enties as gap:
+	 * the original 6 enties as gap:
 	 *
-	 * 12*4(%esp) - <previous context>
-	 * 11*4(%esp) - gap / flags
-	 * 10*4(%esp) - gap / cs
-	 *  9*4(%esp) - gap / ip
-	 *  8*4(%esp) - gap / orig_eax
-	 *  7*4(%esp) - gap / gs / function
-	 *  6*4(%esp) - ss
-	 *  5*4(%esp) - sp
-	 *  4*4(%esp) - flags
-	 *  3*4(%esp) - cs
-	 *  2*4(%esp) - ip
-	 *  1*4(%esp) - orig_eax
-	 *  0*4(%esp) - gs / function
+	 * 14*4(%esp) - <previous context>
+	 * 13*4(%esp) - gap / flags
+	 * 12*4(%esp) - gap / cs
+	 * 11*4(%esp) - gap / ip
+	 * 10*4(%esp) - gap / orig_eax
+	 *  9*4(%esp) - gap / gs / function
+	 *  8*4(%esp) - gap / fs
+	 *  7*4(%esp) - ss
+	 *  6*4(%esp) - sp
+	 *  5*4(%esp) - flags
+	 *  4*4(%esp) - cs
+	 *  3*4(%esp) - ip
+	 *  2*4(%esp) - orig_eax
+	 *  1*4(%esp) - gs / function
+	 *  0*4(%esp) - fs
 	 */
 
 	pushl	%ss		# ss
 	pushl	%esp		# sp (points at ss)
-	addl	$6*4, (%esp)	# point sp back at the previous context
-	pushl	6*4(%esp)	# flags
-	pushl	6*4(%esp)	# cs
-	pushl	6*4(%esp)	# ip
-	pushl	6*4(%esp)	# orig_eax
-	pushl	6*4(%esp)	# gs / function
+	addl	$7*4, (%esp)	# point sp back at the previous context
+	pushl	7*4(%esp)	# flags
+	pushl	7*4(%esp)	# cs
+	pushl	7*4(%esp)	# ip
+	pushl	7*4(%esp)	# orig_eax
+	pushl	7*4(%esp)	# gs / function
+	pushl	7*4(%esp)	# fs
 .Lfrom_usermode_no_fixup_\@:
 .endm
 
 .macro IRET_FRAME
+	/*
+	 * We're called with %ds, %es, %fs, and %gs from the interrupted
+	 * frame, so we shouldn't use them.  Also, we may be in ESPFIX
+	 * mode and therefore have a nonzero SS base and an offset ESP,
+	 * so any attempt to access the stack needs to use SS.  (except for
+	 * accesses through %esp, which automatically use SS.)
+	 */
 	testl $CS_FROM_KERNEL, 1*4(%esp)
 	jz .Lfinished_frame_\@
 
@@ -276,31 +288,40 @@
 	movl	5*4(%esp), %eax		# (modified) regs->sp
 
 	movl	4*4(%esp), %ecx		# flags
-	movl	%ecx, -4(%eax)
+	movl	%ecx, %ss:-1*4(%eax)
 
 	movl	3*4(%esp), %ecx		# cs
 	andl	$0x0000ffff, %ecx
-	movl	%ecx, -8(%eax)
+	movl	%ecx, %ss:-2*4(%eax)
 
 	movl	2*4(%esp), %ecx		# ip
-	movl	%ecx, -12(%eax)
+	movl	%ecx, %ss:-3*4(%eax)
 
 	movl	1*4(%esp), %ecx		# eax
-	movl	%ecx, -16(%eax)
+	movl	%ecx, %ss:-4*4(%eax)
 
 	popl	%ecx
-	lea	-16(%eax), %esp
+	lea	-4*4(%eax), %esp
 	popl	%eax
 .Lfinished_frame_\@:
 .endm
 
-.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0
+.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0 unwind_espfix=0
 	cld
 .if \skip_gs == 0
 	PUSH_GS
 .endif
-	FIXUP_FRAME
 	pushl	%fs
+
+	pushl	%eax
+	movl	$(__KERNEL_PERCPU), %eax
+	movl	%eax, %fs
+.if \unwind_espfix > 0
+	UNWIND_ESPFIX_STACK
+.endif
+	popl	%eax
+
+	FIXUP_FRAME
 	pushl	%es
 	pushl	%ds
 	pushl	\pt_regs_ax
@@ -313,8 +334,6 @@
 	movl	$(__USER_DS), %edx
 	movl	%edx, %ds
 	movl	%edx, %es
-	movl	$(__KERNEL_PERCPU), %edx
-	movl	%edx, %fs
 .if \skip_gs == 0
 	SET_KERNEL_GS %edx
 .endif
@@ -324,8 +343,8 @@
 .endif
 .endm
 
-.macro SAVE_ALL_NMI cr3_reg:req
-	SAVE_ALL
+.macro SAVE_ALL_NMI cr3_reg:req unwind_espfix=0
+	SAVE_ALL unwind_espfix=\unwind_espfix
 
 	BUG_IF_WRONG_CR3
 
@@ -357,6 +376,7 @@
 2:	popl	%es
 3:	popl	%fs
 	POP_GS \pop
+	IRET_FRAME
 .pushsection .fixup, "ax"
 4:	movl	$0, (%esp)
 	jmp	1b
@@ -395,7 +415,8 @@
 
 .macro CHECK_AND_APPLY_ESPFIX
 #ifdef CONFIG_X86_ESPFIX32
-#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
+#define GDT_ESPFIX_OFFSET (GDT_ENTRY_ESPFIX_SS * 8)
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + GDT_ESPFIX_OFFSET
 
 	ALTERNATIVE	"jmp .Lend_\@", "", X86_BUG_ESPFIX
 
@@ -1075,7 +1096,6 @@ restore_all:
 	/* Restore user state */
 	RESTORE_REGS pop=4			# skip orig_eax/error_code
 .Lirq_return:
-	IRET_FRAME
 	/*
 	 * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization
 	 * when returning from IPI handler and when returning from
@@ -1128,30 +1148,43 @@ ENDPROC(entry_INT80_32)
  * We can't call C functions using the ESPFIX stack. This code reads
  * the high word of the segment base from the GDT and swiches to the
  * normal stack and adjusts ESP with the matching offset.
+ *
+ * We might be on user CR3 here, so percpu data is not mapped and we can't
+ * access the GDT through the percpu segment.  Instead, use SGDT to find
+ * the cpu_entry_area alias of the GDT.
  */
 #ifdef CONFIG_X86_ESPFIX32
 	/* fixup the stack */
-	mov	GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
-	mov	GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
+	pushl	%ecx
+	subl	$2*4, %esp
+	sgdt	(%esp)
+	movl	2(%esp), %ecx				/* GDT address */
+	/*
+	 * Careful: ECX is a linear pointer, so we need to force base
+	 * zero.  %cs is the only known-linear segment we have right now.
+	 */
+	mov	%cs:GDT_ESPFIX_OFFSET + 4(%ecx), %al	/* bits 16..23 */
+	mov	%cs:GDT_ESPFIX_OFFSET + 7(%ecx), %ah	/* bits 24..31 */
 	shl	$16, %eax
+	addl	$2*4, %esp
+	popl	%ecx
 	addl	%esp, %eax			/* the adjusted stack pointer */
 	pushl	$__KERNEL_DS
 	pushl	%eax
 	lss	(%esp), %esp			/* switch to the normal stack segment */
 #endif
 .endm
+
 .macro UNWIND_ESPFIX_STACK
+	/* It's safe to clobber %eax, all other regs need to be preserved */
 #ifdef CONFIG_X86_ESPFIX32
 	movl	%ss, %eax
 	/* see if on espfix stack */
 	cmpw	$__ESPFIX_SS, %ax
-	jne	27f
-	movl	$__KERNEL_DS, %eax
-	movl	%eax, %ds
-	movl	%eax, %es
+	jne	.Lno_fixup_\@
 	/* switch to normal stack */
 	FIXUP_ESPFIX_STACK
-27:
+.Lno_fixup_\@:
 #endif
 .endm
 
@@ -1341,11 +1374,6 @@ END(spurious_interrupt_bug)
 
 #ifdef CONFIG_XEN_PV
 ENTRY(xen_hypervisor_callback)
-	pushl	$-1				/* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	ENCODE_FRAME_POINTER
-	TRACE_IRQS_OFF
-
 	/*
 	 * Check to see if we got the event in the critical
 	 * region in xen_iret_direct, after we've reenabled
@@ -1353,16 +1381,17 @@ ENTRY(xen_hypervisor_callback)
 	 * iret instruction's behaviour where it delivers a
 	 * pending interrupt when enabling interrupts:
 	 */
-	movl	PT_EIP(%esp), %eax
-	cmpl	$xen_iret_start_crit, %eax
+	cmpl	$xen_iret_start_crit, (%esp)
 	jb	1f
-	cmpl	$xen_iret_end_crit, %eax
+	cmpl	$xen_iret_end_crit, (%esp)
 	jae	1f
-
-	jmp	xen_iret_crit_fixup
-
-ENTRY(xen_do_upcall)
-1:	mov	%esp, %eax
+	call	xen_iret_crit_fixup
+1:
+	pushl	$-1				/* orig_ax = -1 => not a system call */
+	SAVE_ALL
+	ENCODE_FRAME_POINTER
+	TRACE_IRQS_OFF
+	mov	%esp, %eax
 	call	xen_evtchn_do_upcall
 #ifndef CONFIG_PREEMPT
 	call	xen_maybe_preempt_hcall
@@ -1449,10 +1478,9 @@ END(page_fault)
 
 common_exception_read_cr2:
 	/* the function address is in %gs's slot on the stack */
-	SAVE_ALL switch_stacks=1 skip_gs=1
+	SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
 
 	ENCODE_FRAME_POINTER
-	UNWIND_ESPFIX_STACK
 
 	/* fixup %gs */
 	GS_TO_REG %ecx
@@ -1474,9 +1502,8 @@ END(common_exception_read_cr2)
 
 common_exception:
 	/* the function address is in %gs's slot on the stack */
-	SAVE_ALL switch_stacks=1 skip_gs=1
+	SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
 	ENCODE_FRAME_POINTER
-	UNWIND_ESPFIX_STACK
 
 	/* fixup %gs */
 	GS_TO_REG %ecx
@@ -1515,6 +1542,10 @@ ENTRY(nmi)
 	ASM_CLAC
 
 #ifdef CONFIG_X86_ESPFIX32
+	/*
+	 * ESPFIX_SS is only ever set on the return to user path
+	 * after we've switched to the entry stack.
+	 */
 	pushl	%eax
 	movl	%ss, %eax
 	cmpw	$__ESPFIX_SS, %ax
@@ -1550,6 +1581,11 @@ ENTRY(nmi)
 	movl	%ebx, %esp
 
 .Lnmi_return:
+#ifdef CONFIG_X86_ESPFIX32
+	testl	$CS_FROM_ESPFIX, PT_CS(%esp)
+	jnz	.Lnmi_from_espfix
+#endif
+
 	CHECK_AND_APPLY_ESPFIX
 	RESTORE_ALL_NMI cr3_reg=%edi pop=4
 	jmp	.Lirq_return
@@ -1557,23 +1593,42 @@ ENTRY(nmi)
 #ifdef CONFIG_X86_ESPFIX32
 .Lnmi_espfix_stack:
 	/*
-	 * create the pointer to lss back
+	 * Create the pointer to LSS back
 	 */
 	pushl	%ss
 	pushl	%esp
 	addl	$4, (%esp)
-	/* copy the iret frame of 12 bytes */
-	.rept 3
-	pushl	16(%esp)
-	.endr
-	pushl	%eax
-	SAVE_ALL_NMI cr3_reg=%edi
+
+	/* Copy the (short) IRET frame */
+	pushl	4*4(%esp)	# flags
+	pushl	4*4(%esp)	# cs
+	pushl	4*4(%esp)	# ip
+
+	pushl	%eax		# orig_ax
+
+	SAVE_ALL_NMI cr3_reg=%edi unwind_espfix=1
 	ENCODE_FRAME_POINTER
-	FIXUP_ESPFIX_STACK			# %eax == %esp
+
+	/* clear CS_FROM_KERNEL, set CS_FROM_ESPFIX */
+	xorl	$(CS_FROM_ESPFIX | CS_FROM_KERNEL), PT_CS(%esp)
+
 	xorl	%edx, %edx			# zero error code
-	call	do_nmi
+	movl	%esp, %eax			# pt_regs pointer
+	jmp	.Lnmi_from_sysenter_stack
+
+.Lnmi_from_espfix:
 	RESTORE_ALL_NMI cr3_reg=%edi
-	lss	12+4(%esp), %esp		# back to espfix stack
+	/*
+	 * Because we cleared CS_FROM_KERNEL, IRET_FRAME 'forgot' to
+	 * fix up the gap and long frame:
+	 *
+	 *  3 - original frame	(exception)
+	 *  2 - ESPFIX block	(above)
+	 *  6 - gap		(FIXUP_FRAME)
+	 *  5 - long frame	(FIXUP_FRAME)
+	 *  1 - orig_ax
+	 */
+	lss	(1+5+6)*4(%esp), %esp			# back to espfix stack
 	jmp	.Lirq_return
 #endif
 END(nmi)
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/include/asm/cpu_entry_area.h linux-libre-5.3.14-gnu/arch/x86/include/asm/cpu_entry_area.h
--- linux-libre-5.3.13-gnu/arch/x86/include/asm/cpu_entry_area.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/include/asm/cpu_entry_area.h	2019-11-29 04:08:31.000000000 -0500
@@ -78,8 +78,12 @@ struct cpu_entry_area {
 
 	/*
 	 * The GDT is just below entry_stack and thus serves (on x86_64) as
-	 * a a read-only guard page.
+	 * a read-only guard page. On 32-bit the GDT must be writeable, so
+	 * it needs an extra guard page.
 	 */
+#ifdef CONFIG_X86_32
+	char guard_entry_stack[PAGE_SIZE];
+#endif
 	struct entry_stack_page entry_stack_page;
 
 	/*
@@ -94,7 +98,6 @@ struct cpu_entry_area {
 	 */
 	struct cea_exception_stacks estacks;
 #endif
-#ifdef CONFIG_CPU_SUP_INTEL
 	/*
 	 * Per CPU debug store for Intel performance monitoring. Wastes a
 	 * full page at the moment.
@@ -105,11 +108,13 @@ struct cpu_entry_area {
 	 * Reserve enough fixmap PTEs.
 	 */
 	struct debug_store_buffers cpu_debug_buffers;
-#endif
 };
 
-#define CPU_ENTRY_AREA_SIZE	(sizeof(struct cpu_entry_area))
-#define CPU_ENTRY_AREA_TOT_SIZE	(CPU_ENTRY_AREA_SIZE * NR_CPUS)
+#define CPU_ENTRY_AREA_SIZE		(sizeof(struct cpu_entry_area))
+#define CPU_ENTRY_AREA_ARRAY_SIZE	(CPU_ENTRY_AREA_SIZE * NR_CPUS)
+
+/* Total size includes the readonly IDT mapping page as well: */
+#define CPU_ENTRY_AREA_TOTAL_SIZE	(CPU_ENTRY_AREA_ARRAY_SIZE + PAGE_SIZE)
 
 DECLARE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
 DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
@@ -117,13 +122,14 @@ DECLARE_PER_CPU(struct cea_exception_sta
 extern void setup_cpu_entry_areas(void);
 extern void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags);
 
+/* Single page reserved for the readonly IDT mapping: */
 #define	CPU_ENTRY_AREA_RO_IDT		CPU_ENTRY_AREA_BASE
 #define CPU_ENTRY_AREA_PER_CPU		(CPU_ENTRY_AREA_RO_IDT + PAGE_SIZE)
 
 #define CPU_ENTRY_AREA_RO_IDT_VADDR	((void *)CPU_ENTRY_AREA_RO_IDT)
 
 #define CPU_ENTRY_AREA_MAP_SIZE			\
-	(CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_TOT_SIZE - CPU_ENTRY_AREA_BASE)
+	(CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_ARRAY_SIZE - CPU_ENTRY_AREA_BASE)
 
 extern struct cpu_entry_area *get_cpu_entry_area(int cpu);
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/include/asm/pgtable_32_types.h linux-libre-5.3.14-gnu/arch/x86/include/asm/pgtable_32_types.h
--- linux-libre-5.3.13-gnu/arch/x86/include/asm/pgtable_32_types.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/include/asm/pgtable_32_types.h	2019-11-29 04:08:31.000000000 -0500
@@ -44,11 +44,11 @@ extern bool __vmalloc_start_set; /* set
  * Define this here and validate with BUILD_BUG_ON() in pgtable_32.c
  * to avoid include recursion hell
  */
-#define CPU_ENTRY_AREA_PAGES	(NR_CPUS * 40)
+#define CPU_ENTRY_AREA_PAGES	(NR_CPUS * 39)
 
-#define CPU_ENTRY_AREA_BASE						\
-	((FIXADDR_TOT_START - PAGE_SIZE * (CPU_ENTRY_AREA_PAGES + 1))   \
-	 & PMD_MASK)
+/* The +1 is for the readonly IDT page: */
+#define CPU_ENTRY_AREA_BASE	\
+	((FIXADDR_TOT_START - PAGE_SIZE*(CPU_ENTRY_AREA_PAGES+1)) & PMD_MASK)
 
 #define LDT_BASE_ADDR		\
 	((CPU_ENTRY_AREA_BASE - PAGE_SIZE) & PMD_MASK)
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/include/asm/segment.h linux-libre-5.3.14-gnu/arch/x86/include/asm/segment.h
--- linux-libre-5.3.13-gnu/arch/x86/include/asm/segment.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/include/asm/segment.h	2019-11-29 04:08:31.000000000 -0500
@@ -31,6 +31,18 @@
  */
 #define SEGMENT_RPL_MASK	0x3
 
+/*
+ * When running on Xen PV, the actual privilege level of the kernel is 1,
+ * not 0. Testing the Requested Privilege Level in a segment selector to
+ * determine whether the context is user mode or kernel mode with
+ * SEGMENT_RPL_MASK is wrong because the PV kernel's privilege level
+ * matches the 0x3 mask.
+ *
+ * Testing with USER_SEGMENT_RPL_MASK is valid for both native and Xen PV
+ * kernels because privilege level 2 is never used.
+ */
+#define USER_SEGMENT_RPL_MASK	0x2
+
 /* User mode is privilege level 3: */
 #define USER_RPL		0x3
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/kernel/cpu/bugs.c linux-libre-5.3.14-gnu/arch/x86/kernel/cpu/bugs.c
--- linux-libre-5.3.13-gnu/arch/x86/kernel/cpu/bugs.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/kernel/cpu/bugs.c	2019-11-29 04:08:31.000000000 -0500
@@ -39,6 +39,7 @@ static void __init spectre_v2_select_mit
 static void __init ssb_select_mitigation(void);
 static void __init l1tf_select_mitigation(void);
 static void __init mds_select_mitigation(void);
+static void __init mds_print_mitigation(void);
 static void __init taa_select_mitigation(void);
 
 /* The base value of the SPEC_CTRL MSR that always has to be preserved. */
@@ -108,6 +109,12 @@ void __init check_bugs(void)
 	mds_select_mitigation();
 	taa_select_mitigation();
 
+	/*
+	 * As MDS and TAA mitigations are inter-related, print MDS
+	 * mitigation until after TAA mitigation selection is done.
+	 */
+	mds_print_mitigation();
+
 	arch_smt_update();
 
 #ifdef CONFIG_X86_32
@@ -245,6 +252,12 @@ static void __init mds_select_mitigation
 		    (mds_nosmt || cpu_mitigations_auto_nosmt()))
 			cpu_smt_disable(false);
 	}
+}
+
+static void __init mds_print_mitigation(void)
+{
+	if (!boot_cpu_has_bug(X86_BUG_MDS) || cpu_mitigations_off())
+		return;
 
 	pr_info("%s\n", mds_strings[mds_mitigation]);
 }
@@ -304,8 +317,12 @@ static void __init taa_select_mitigation
 		return;
 	}
 
-	/* TAA mitigation is turned off on the cmdline (tsx_async_abort=off) */
-	if (taa_mitigation == TAA_MITIGATION_OFF)
+	/*
+	 * TAA mitigation via VERW is turned off if both
+	 * tsx_async_abort=off and mds=off are specified.
+	 */
+	if (taa_mitigation == TAA_MITIGATION_OFF &&
+	    mds_mitigation == MDS_MITIGATION_OFF)
 		goto out;
 
 	if (boot_cpu_has(X86_FEATURE_MD_CLEAR))
@@ -339,6 +356,15 @@ static void __init taa_select_mitigation
 	if (taa_nosmt || cpu_mitigations_auto_nosmt())
 		cpu_smt_disable(false);
 
+	/*
+	 * Update MDS mitigation, if necessary, as the mds_user_clear is
+	 * now enabled for TAA mitigation.
+	 */
+	if (mds_mitigation == MDS_MITIGATION_OFF &&
+	    boot_cpu_has_bug(X86_BUG_MDS)) {
+		mds_mitigation = MDS_MITIGATION_FULL;
+		mds_select_mitigation();
+	}
 out:
 	pr_info("%s\n", taa_strings[taa_mitigation]);
 }
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/kernel/doublefault.c linux-libre-5.3.14-gnu/arch/x86/kernel/doublefault.c
--- linux-libre-5.3.13-gnu/arch/x86/kernel/doublefault.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/kernel/doublefault.c	2019-11-29 04:08:31.000000000 -0500
@@ -65,6 +65,9 @@ struct x86_hw_tss doublefault_tss __cach
 	.ss		= __KERNEL_DS,
 	.ds		= __USER_DS,
 	.fs		= __KERNEL_PERCPU,
+#ifndef CONFIG_X86_32_LAZY_GS
+	.gs		= __KERNEL_STACK_CANARY,
+#endif
 
 	.__cr3		= __pa_nodebug(swapper_pg_dir),
 };
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/kernel/head_32.S linux-libre-5.3.14-gnu/arch/x86/kernel/head_32.S
--- linux-libre-5.3.13-gnu/arch/x86/kernel/head_32.S	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/kernel/head_32.S	2019-11-29 04:08:31.000000000 -0500
@@ -571,6 +571,16 @@ ENTRY(initial_page_table)
 #  error "Kernel PMDs should be 1, 2 or 3"
 # endif
 	.align PAGE_SIZE		/* needs to be page-sized too */
+
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	/*
+	 * PTI needs another page so sync_initial_pagetable() works correctly
+	 * and does not scribble over the data which is placed behind the
+	 * actual initial_page_table. See clone_pgd_range().
+	 */
+	.fill 1024, 4, 0
+#endif
+
 #endif
 
 .data
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/mm/cpu_entry_area.c linux-libre-5.3.14-gnu/arch/x86/mm/cpu_entry_area.c
--- linux-libre-5.3.13-gnu/arch/x86/mm/cpu_entry_area.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/mm/cpu_entry_area.c	2019-11-29 04:08:31.000000000 -0500
@@ -178,7 +178,9 @@ static __init void setup_cpu_entry_area_
 #ifdef CONFIG_X86_32
 	unsigned long start, end;
 
-	BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);
+	/* The +1 is for the readonly IDT: */
+	BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
+	BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
 	BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK);
 
 	start = CPU_ENTRY_AREA_BASE;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/tools/gen-insn-attr-x86.awk linux-libre-5.3.14-gnu/arch/x86/tools/gen-insn-attr-x86.awk
--- linux-libre-5.3.13-gnu/arch/x86/tools/gen-insn-attr-x86.awk	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/tools/gen-insn-attr-x86.awk	2019-11-29 04:08:31.000000000 -0500
@@ -69,7 +69,7 @@ BEGIN {
 
 	lprefix1_expr = "\\((66|!F3)\\)"
 	lprefix2_expr = "\\(F3\\)"
-	lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)"
+	lprefix3_expr = "\\((F2|!F3|66&F2)\\)"
 	lprefix_expr = "\\((66|F2|F3)\\)"
 	max_lprefix = 4
 
@@ -257,7 +257,7 @@ function convert_operands(count,opnd,
 	return add_flags(imm, mod)
 }
 
-/^[0-9a-f]+\:/ {
+/^[0-9a-f]+:/ {
 	if (NR == 1)
 		next
 	# get index
diff -druNp --no-dereference linux-libre-5.3.13-gnu/arch/x86/xen/xen-asm_32.S linux-libre-5.3.14-gnu/arch/x86/xen/xen-asm_32.S
--- linux-libre-5.3.13-gnu/arch/x86/xen/xen-asm_32.S	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/arch/x86/xen/xen-asm_32.S	2019-11-29 04:08:31.000000000 -0500
@@ -126,10 +126,9 @@ hyper_iret:
 	.globl xen_iret_start_crit, xen_iret_end_crit
 
 /*
- * This is called by xen_hypervisor_callback in entry.S when it sees
+ * This is called by xen_hypervisor_callback in entry_32.S when it sees
  * that the EIP at the time of interrupt was between
- * xen_iret_start_crit and xen_iret_end_crit.  We're passed the EIP in
- * %eax so we can do a more refined determination of what to do.
+ * xen_iret_start_crit and xen_iret_end_crit.
  *
  * The stack format at this point is:
  *	----------------
@@ -138,70 +137,46 @@ hyper_iret:
  *	 eflags		}  outer exception info
  *	 cs		}
  *	 eip		}
- *	---------------- <- edi (copy dest)
- *	 eax		:  outer eax if it hasn't been restored
  *	----------------
- *	 eflags		}  nested exception info
- *	 cs		}   (no ss/esp because we're nested
- *	 eip		}    from the same ring)
- *	 orig_eax	}<- esi (copy src)
- *	 - - - - - - - -
- *	 fs		}
- *	 es		}
- *	 ds		}  SAVE_ALL state
- *	 eax		}
- *	  :		:
- *	 ebx		}<- esp
+ *	 eax		:  outer eax if it hasn't been restored
  *	----------------
+ *	 eflags		}
+ *	 cs		}  nested exception info
+ *	 eip		}
+ *	 return address	: (into xen_hypervisor_callback)
  *
- * In order to deliver the nested exception properly, we need to shift
- * everything from the return addr up to the error code so it sits
- * just under the outer exception info.  This means that when we
- * handle the exception, we do it in the context of the outer
- * exception rather than starting a new one.
+ * In order to deliver the nested exception properly, we need to discard the
+ * nested exception frame such that when we handle the exception, we do it
+ * in the context of the outer exception rather than starting a new one.
  *
- * The only caveat is that if the outer eax hasn't been restored yet
- * (ie, it's still on stack), we need to insert its value into the
- * SAVE_ALL state before going on, since it's usermode state which we
- * eventually need to restore.
+ * The only caveat is that if the outer eax hasn't been restored yet (i.e.
+ * it's still on stack), we need to restore its value here.
  */
 ENTRY(xen_iret_crit_fixup)
 	/*
 	 * Paranoia: Make sure we're really coming from kernel space.
 	 * One could imagine a case where userspace jumps into the
 	 * critical range address, but just before the CPU delivers a
-	 * GP, it decides to deliver an interrupt instead.  Unlikely?
-	 * Definitely.  Easy to avoid?  Yes.  The Intel documents
-	 * explicitly say that the reported EIP for a bad jump is the
-	 * jump instruction itself, not the destination, but some
-	 * virtual environments get this wrong.
+	 * PF, it decides to deliver an interrupt instead.  Unlikely?
+	 * Definitely.  Easy to avoid?  Yes.
 	 */
-	movl PT_CS(%esp), %ecx
-	andl $SEGMENT_RPL_MASK, %ecx
-	cmpl $USER_RPL, %ecx
-	je 2f
-
-	lea PT_ORIG_EAX(%esp), %esi
-	lea PT_EFLAGS(%esp), %edi
+	testb $2, 2*4(%esp)		/* nested CS */
+	jnz 2f
 
 	/*
 	 * If eip is before iret_restore_end then stack
 	 * hasn't been restored yet.
 	 */
-	cmp $iret_restore_end, %eax
+	cmpl $iret_restore_end, 1*4(%esp)
 	jae 1f
 
-	movl 0+4(%edi), %eax		/* copy EAX (just above top of frame) */
-	movl %eax, PT_EAX(%esp)
-
-	lea ESP_OFFSET(%edi), %edi	/* move dest up over saved regs */
-
-	/* set up the copy */
-1:	std
-	mov $PT_EIP / 4, %ecx		/* saved regs up to orig_eax */
-	rep movsl
-	cld
+	movl 4*4(%esp), %eax		/* load outer EAX */
+	ret $4*4			/* discard nested EIP, CS, and EFLAGS as
+					 * well as the just restored EAX */
 
-	lea 4(%edi), %esp		/* point esp to new frame */
-2:	jmp xen_do_upcall
+1:
+	ret $3*4			/* discard nested EIP, CS, and EFLAGS */
 
+2:
+	ret
+END(xen_iret_crit_fixup)
diff -druNp --no-dereference linux-libre-5.3.13-gnu/Documentation/admin-guide/hw-vuln/mds.rst linux-libre-5.3.14-gnu/Documentation/admin-guide/hw-vuln/mds.rst
--- linux-libre-5.3.13-gnu/Documentation/admin-guide/hw-vuln/mds.rst	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/Documentation/admin-guide/hw-vuln/mds.rst	2019-11-29 04:08:31.000000000 -0500
@@ -265,8 +265,11 @@ time with the option "mds=". The valid a
 
   ============  =============================================================
 
-Not specifying this option is equivalent to "mds=full".
-
+Not specifying this option is equivalent to "mds=full". For processors
+that are affected by both TAA (TSX Asynchronous Abort) and MDS,
+specifying just "mds=off" without an accompanying "tsx_async_abort=off"
+will have no effect as the same mitigation is used for both
+vulnerabilities.
 
 Mitigation selection guide
 --------------------------
diff -druNp --no-dereference linux-libre-5.3.13-gnu/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst linux-libre-5.3.14-gnu/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
--- linux-libre-5.3.13-gnu/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst	2019-11-29 04:08:31.000000000 -0500
@@ -174,7 +174,10 @@ the option "tsx_async_abort=". The valid
                 CPU is not vulnerable to cross-thread TAA attacks.
   ============  =============================================================
 
-Not specifying this option is equivalent to "tsx_async_abort=full".
+Not specifying this option is equivalent to "tsx_async_abort=full". For
+processors that are affected by both TAA and MDS, specifying just
+"tsx_async_abort=off" without an accompanying "mds=off" will have no
+effect as the same mitigation is used for both vulnerabilities.
 
 The kernel command line also allows to control the TSX feature using the
 parameter "tsx=" on CPUs which support TSX control. MSR_IA32_TSX_CTRL is used
diff -druNp --no-dereference linux-libre-5.3.13-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.3.14-gnu/Documentation/admin-guide/kernel-parameters.txt
--- linux-libre-5.3.13-gnu/Documentation/admin-guide/kernel-parameters.txt	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/Documentation/admin-guide/kernel-parameters.txt	2019-11-29 04:08:31.000000000 -0500
@@ -2449,6 +2449,12 @@
 				     SMT on vulnerable CPUs
 			off        - Unconditionally disable MDS mitigation
 
+			On TAA-affected machines, mds=off can be prevented by
+			an active TAA mitigation as both vulnerabilities are
+			mitigated with the same mechanism so in order to disable
+			this mitigation, you need to specify tsx_async_abort=off
+			too.
+
 			Not specifying this option is equivalent to
 			mds=full.
 
@@ -4896,6 +4902,11 @@
 				     vulnerable to cross-thread TAA attacks.
 			off        - Unconditionally disable TAA mitigation
 
+			On MDS-affected machines, tsx_async_abort=off can be
+			prevented by an active MDS mitigation as both vulnerabilities
+			are mitigated with the same mechanism so in order to disable
+			this mitigation, you need to specify mds=off too.
+
 			Not specifying this option is equivalent to
 			tsx_async_abort=full.  On CPUs which are MDS affected
 			and deploy MDS mitigation, TAA mitigation is not
diff -druNp --no-dereference linux-libre-5.3.13-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt linux-libre-5.3.14-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
--- linux-libre-5.3.13-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt	2019-11-24 03:48:22.000000000 -0500
+++ linux-libre-5.3.14-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt	2019-11-29 07:55:54.000000000 -0500
@@ -81,6 +81,12 @@ Optional properties:
 	Definition: Name of external front end module used. Some valid FEM names
 		    for example: "microsemi-lx5586", "sky85703-11"
 		    and "sky85803" etc.
+- qcom,snoc-host-cap-8bit-quirk:
+	Usage: Optional
+	Value type: <empty>
+	Definition: Quirk specifying that the firmware expects the 8bit version
+		    of the host capability QMI request
+
 
 Example (to supply PCI based wifi block details):
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/block/nbd.c linux-libre-5.3.14-gnu/drivers/block/nbd.c
--- linux-libre-5.3.13-gnu/drivers/block/nbd.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/block/nbd.c	2019-11-29 04:08:31.000000000 -0500
@@ -956,6 +956,7 @@ static struct socket *nbd_get_socket(str
 	if (sock->ops->shutdown == sock_no_shutdown) {
 		dev_err(disk_to_dev(nbd->disk), "Unsupported socket: shutdown callout must be supported.\n");
 		*err = -EINVAL;
+		sockfd_put(sock);
 		return NULL;
 	}
 
@@ -994,14 +995,15 @@ static int nbd_add_socket(struct nbd_dev
 		sockfd_put(sock);
 		return -ENOMEM;
 	}
+
+	config->socks = socks;
+
 	nsock = kzalloc(sizeof(struct nbd_sock), GFP_KERNEL);
 	if (!nsock) {
 		sockfd_put(sock);
 		return -ENOMEM;
 	}
 
-	config->socks = socks;
-
 	nsock->fallback_index = -1;
 	nsock->dead = false;
 	mutex_init(&nsock->tx_lock);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/bluetooth/hci_bcsp.c linux-libre-5.3.14-gnu/drivers/bluetooth/hci_bcsp.c
--- linux-libre-5.3.13-gnu/drivers/bluetooth/hci_bcsp.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/bluetooth/hci_bcsp.c	2019-11-29 04:08:31.000000000 -0500
@@ -591,6 +591,7 @@ static int bcsp_recv(struct hci_uart *hu
 			if (*ptr == 0xc0) {
 				BT_ERR("Short BCSP packet");
 				kfree_skb(bcsp->rx_skb);
+				bcsp->rx_skb = NULL;
 				bcsp->rx_state = BCSP_W4_PKT_START;
 				bcsp->rx_count = 0;
 			} else
@@ -606,6 +607,7 @@ static int bcsp_recv(struct hci_uart *hu
 			    bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
 				BT_ERR("Error in BCSP hdr checksum");
 				kfree_skb(bcsp->rx_skb);
+				bcsp->rx_skb = NULL;
 				bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
 				bcsp->rx_count = 0;
 				continue;
@@ -630,6 +632,7 @@ static int bcsp_recv(struct hci_uart *hu
 				       bscp_get_crc(bcsp));
 
 				kfree_skb(bcsp->rx_skb);
+				bcsp->rx_skb = NULL;
 				bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
 				bcsp->rx_count = 0;
 				continue;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/bluetooth/hci_ll.c linux-libre-5.3.14-gnu/drivers/bluetooth/hci_ll.c
--- linux-libre-5.3.13-gnu/drivers/bluetooth/hci_ll.c	2019-11-24 03:52:04.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/bluetooth/hci_ll.c	2019-11-29 07:59:50.000000000 -0500
@@ -621,13 +621,6 @@ static int ll_setup(struct hci_uart *hu)
 
 	serdev_device_set_flow_control(serdev, true);
 
-	if (hu->oper_speed)
-		speed = hu->oper_speed;
-	else if (hu->proto->oper_speed)
-		speed = hu->proto->oper_speed;
-	else
-		speed = 0;
-
 	do {
 		/* Reset the Bluetooth device */
 		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
@@ -639,20 +632,6 @@ static int ll_setup(struct hci_uart *hu)
 			return err;
 		}
 
-		if (speed) {
-			__le32 speed_le = cpu_to_le32(speed);
-			struct sk_buff *skb;
-
-			skb = __hci_cmd_sync(hu->hdev,
-					     HCI_VS_UPDATE_UART_HCI_BAUDRATE,
-					     sizeof(speed_le), &speed_le,
-					     HCI_INIT_TIMEOUT);
-			if (!IS_ERR(skb)) {
-				kfree_skb(skb);
-				serdev_device_set_baudrate(serdev, speed);
-			}
-		}
-
 		err = download_firmware(lldev);
 		if (!err)
 			break;
@@ -677,7 +656,25 @@ static int ll_setup(struct hci_uart *hu)
 	}
 
 	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
 
+	if (speed) {
+		__le32 speed_le = cpu_to_le32(speed);
+		struct sk_buff *skb;
+
+		skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE,
+				     sizeof(speed_le), &speed_le,
+				     HCI_INIT_TIMEOUT);
+		if (!IS_ERR(skb)) {
+			kfree_skb(skb);
+			serdev_device_set_baudrate(serdev, speed);
+		}
+	}
 
 	return 0;
 }
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/char/virtio_console.c linux-libre-5.3.14-gnu/drivers/char/virtio_console.c
--- linux-libre-5.3.13-gnu/drivers/char/virtio_console.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/char/virtio_console.c	2019-11-29 04:08:31.000000000 -0500
@@ -1325,24 +1325,24 @@ static void set_console_size(struct port
 	port->cons.ws.ws_col = cols;
 }
 
-static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock)
+static int fill_queue(struct virtqueue *vq, spinlock_t *lock)
 {
 	struct port_buffer *buf;
-	unsigned int nr_added_bufs;
+	int nr_added_bufs;
 	int ret;
 
 	nr_added_bufs = 0;
 	do {
 		buf = alloc_buf(vq->vdev, PAGE_SIZE, 0);
 		if (!buf)
-			break;
+			return -ENOMEM;
 
 		spin_lock_irq(lock);
 		ret = add_inbuf(vq, buf);
 		if (ret < 0) {
 			spin_unlock_irq(lock);
 			free_buf(buf, true);
-			break;
+			return ret;
 		}
 		nr_added_bufs++;
 		spin_unlock_irq(lock);
@@ -1362,7 +1362,6 @@ static int add_port(struct ports_device
 	char debugfs_name[16];
 	struct port *port;
 	dev_t devt;
-	unsigned int nr_added_bufs;
 	int err;
 
 	port = kmalloc(sizeof(*port), GFP_KERNEL);
@@ -1421,11 +1420,13 @@ static int add_port(struct ports_device
 	spin_lock_init(&port->outvq_lock);
 	init_waitqueue_head(&port->waitqueue);
 
-	/* Fill the in_vq with buffers so the host can send us data. */
-	nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock);
-	if (!nr_added_bufs) {
+	/* We can safely ignore ENOSPC because it means
+	 * the queue already has buffers. Buffers are removed
+	 * only by virtcons_remove(), not by unplug_port()
+	 */
+	err = fill_queue(port->in_vq, &port->inbuf_lock);
+	if (err < 0 && err != -ENOSPC) {
 		dev_err(port->dev, "Error allocating inbufs\n");
-		err = -ENOMEM;
 		goto free_device;
 	}
 
@@ -2059,14 +2060,11 @@ static int virtcons_probe(struct virtio_
 	INIT_WORK(&portdev->control_work, &control_work_handler);
 
 	if (multiport) {
-		unsigned int nr_added_bufs;
-
 		spin_lock_init(&portdev->c_ivq_lock);
 		spin_lock_init(&portdev->c_ovq_lock);
 
-		nr_added_bufs = fill_queue(portdev->c_ivq,
-					   &portdev->c_ivq_lock);
-		if (!nr_added_bufs) {
+		err = fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);
+		if (err < 0) {
 			dev_err(&vdev->dev,
 				"Error allocating buffers for control queue\n");
 			/*
@@ -2077,7 +2075,7 @@ static int virtcons_probe(struct virtio_
 					   VIRTIO_CONSOLE_DEVICE_READY, 0);
 			/* Device was functional: we need full cleanup. */
 			virtcons_remove(vdev);
-			return -ENOMEM;
+			return err;
 		}
 	} else {
 		/*
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/cpufreq/cpufreq.c linux-libre-5.3.14-gnu/drivers/cpufreq/cpufreq.c
--- linux-libre-5.3.13-gnu/drivers/cpufreq/cpufreq.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/cpufreq/cpufreq.c	2019-11-29 04:08:31.000000000 -0500
@@ -933,6 +933,9 @@ static ssize_t show(struct kobject *kobj
 	struct freq_attr *fattr = to_attr(attr);
 	ssize_t ret;
 
+	if (!fattr->show)
+		return -EIO;
+
 	down_read(&policy->rwsem);
 	ret = fattr->show(policy, buf);
 	up_read(&policy->rwsem);
@@ -947,6 +950,9 @@ static ssize_t store(struct kobject *kob
 	struct freq_attr *fattr = to_attr(attr);
 	ssize_t ret = -EINVAL;
 
+	if (!fattr->store)
+		return -EIO;
+
 	/*
 	 * cpus_read_trylock() is used here to work around a circular lock
 	 * dependency problem with respect to the cpufreq_register_driver().
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpio/gpio-bd70528.c linux-libre-5.3.14-gnu/drivers/gpio/gpio-bd70528.c
--- linux-libre-5.3.13-gnu/drivers/gpio/gpio-bd70528.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpio/gpio-bd70528.c	2019-11-29 04:08:31.000000000 -0500
@@ -25,13 +25,13 @@ static int bd70528_set_debounce(struct b
 	case 0:
 		val = BD70528_DEBOUNCE_DISABLE;
 		break;
-	case 1 ... 15:
+	case 1 ... 15000:
 		val = BD70528_DEBOUNCE_15MS;
 		break;
-	case 16 ... 30:
+	case 15001 ... 30000:
 		val = BD70528_DEBOUNCE_30MS;
 		break;
-	case 31 ... 50:
+	case 30001 ... 50000:
 		val = BD70528_DEBOUNCE_50MS;
 		break;
 	default:
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpio/gpio-max77620.c linux-libre-5.3.14-gnu/drivers/gpio/gpio-max77620.c
--- linux-libre-5.3.13-gnu/drivers/gpio/gpio-max77620.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpio/gpio-max77620.c	2019-11-29 04:08:31.000000000 -0500
@@ -192,13 +192,13 @@ static int max77620_gpio_set_debounce(st
 	case 0:
 		val = MAX77620_CNFG_GPIO_DBNC_None;
 		break;
-	case 1000 ... 8000:
+	case 1 ... 8000:
 		val = MAX77620_CNFG_GPIO_DBNC_8ms;
 		break;
-	case 9000 ... 16000:
+	case 8001 ... 16000:
 		val = MAX77620_CNFG_GPIO_DBNC_16ms;
 		break;
-	case 17000 ... 32000:
+	case 16001 ... 32000:
 		val = MAX77620_CNFG_GPIO_DBNC_32ms;
 		break;
 	default:
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c linux-libre-5.3.14-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
--- linux-libre-5.3.13-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c	2019-11-29 04:08:31.000000000 -0500
@@ -635,15 +635,19 @@ static int amdgpu_info_ioctl(struct drm_
 			return -ENOMEM;
 		alloc_size = info->read_mmr_reg.count * sizeof(*regs);
 
-		for (i = 0; i < info->read_mmr_reg.count; i++)
+		amdgpu_gfx_off_ctrl(adev, false);
+		for (i = 0; i < info->read_mmr_reg.count; i++) {
 			if (amdgpu_asic_read_register(adev, se_num, sh_num,
 						      info->read_mmr_reg.dword_offset + i,
 						      &regs[i])) {
 				DRM_DEBUG_KMS("unallowed offset %#x\n",
 					      info->read_mmr_reg.dword_offset + i);
 				kfree(regs);
+				amdgpu_gfx_off_ctrl(adev, true);
 				return -EFAULT;
 			}
+		}
+		amdgpu_gfx_off_ctrl(adev, true);
 		n = copy_to_user(out, regs, min(size, alloc_size));
 		kfree(regs);
 		return n ? -EFAULT : 0;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c linux-libre-5.3.14-gnu/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
--- linux-libre-5.3.13-gnu/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c	2019-11-24 03:30:57.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c	2019-11-29 07:35:38.000000000 -0500
@@ -554,8 +554,13 @@ static void gfx_v9_0_check_if_need_gfxof
 	case CHIP_VEGA20:
 		break;
 	case CHIP_RAVEN:
-		if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8)
-			&&((adev->gfx.rlc_fw_version != 106 &&
+		/* Disable GFXOFF on original raven.  There are combinations
+		 * of sbios and platforms that are not stable.
+		 */
+		if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8))
+			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
+		else if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8)
+			 &&((adev->gfx.rlc_fw_version != 106 &&
 			     adev->gfx.rlc_fw_version < 531) ||
 			    (adev->gfx.rlc_fw_version == 53815) ||
 			    (adev->gfx.rlc_feature_version < 1) ||
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c linux-libre-5.3.14-gnu/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
--- linux-libre-5.3.13-gnu/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c	2019-11-29 04:08:31.000000000 -0500
@@ -3477,18 +3477,31 @@ static int smu7_get_pp_table_entry(struc
 
 static int smu7_get_gpu_power(struct pp_hwmgr *hwmgr, u32 *query)
 {
+	struct amdgpu_device *adev = hwmgr->adev;
 	int i;
 	u32 tmp = 0;
 
 	if (!query)
 		return -EINVAL;
 
-	smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetCurrPkgPwr, 0);
-	tmp = cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
-	*query = tmp;
+	/*
+	 * PPSMC_MSG_GetCurrPkgPwr is not supported on:
+	 *  - Hawaii
+	 *  - Bonaire
+	 *  - Fiji
+	 *  - Tonga
+	 */
+	if ((adev->asic_type != CHIP_HAWAII) &&
+	    (adev->asic_type != CHIP_BONAIRE) &&
+	    (adev->asic_type != CHIP_FIJI) &&
+	    (adev->asic_type != CHIP_TONGA)) {
+		smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_GetCurrPkgPwr, 0);
+		tmp = cgs_read_register(hwmgr->device, mmSMC_MSG_ARG_0);
+		*query = tmp;
 
-	if (tmp != 0)
-		return 0;
+		if (tmp != 0)
+			return 0;
+	}
 
 	smum_send_msg_to_smc(hwmgr, PPSMC_MSG_PmStatusLogStart);
 	cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC,
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpu/drm/i915/display/intel_display.c linux-libre-5.3.14-gnu/drivers/gpu/drm/i915/display/intel_display.c
--- linux-libre-5.3.13-gnu/drivers/gpu/drm/i915/display/intel_display.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpu/drm/i915/display/intel_display.c	2019-11-29 04:08:31.000000000 -0500
@@ -2519,6 +2519,9 @@ u32 intel_plane_fb_max_stride(struct drm
 	 * the highest stride limits of them all.
 	 */
 	crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_A);
+	if (!crtc)
+		return 0;
+
 	plane = to_intel_plane(crtc->base.primary);
 
 	return plane->max_stride(plane, pixel_format, modifier,
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpu/drm/i915/gem/i915_gem_userptr.c linux-libre-5.3.14-gnu/drivers/gpu/drm/i915/gem/i915_gem_userptr.c
--- linux-libre-5.3.13-gnu/drivers/gpu/drm/i915/gem/i915_gem_userptr.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpu/drm/i915/gem/i915_gem_userptr.c	2019-11-29 04:08:31.000000000 -0500
@@ -663,8 +663,28 @@ i915_gem_userptr_put_pages(struct drm_i9
 	i915_gem_gtt_finish_pages(obj, pages);
 
 	for_each_sgt_page(page, sgt_iter, pages) {
-		if (obj->mm.dirty)
+		if (obj->mm.dirty && trylock_page(page)) {
+			/*
+			 * As this may not be anonymous memory (e.g. shmem)
+			 * but exist on a real mapping, we have to lock
+			 * the page in order to dirty it -- holding
+			 * the page reference is not sufficient to
+			 * prevent the inode from being truncated.
+			 * Play safe and take the lock.
+			 *
+			 * However...!
+			 *
+			 * The mmu-notifier can be invalidated for a
+			 * migrate_page, that is alreadying holding the lock
+			 * on the page. Such a try_to_unmap() will result
+			 * in us calling put_pages() and so recursively try
+			 * to lock the page. We avoid that deadlock with
+			 * a trylock_page() and in exchange we risk missing
+			 * some page dirtying.
+			 */
 			set_page_dirty(page);
+			unlock_page(page);
+		}
 
 		mark_page_accessed(page);
 		put_page(page);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/gpu/drm/i915/i915_pmu.c linux-libre-5.3.14-gnu/drivers/gpu/drm/i915/i915_pmu.c
--- linux-libre-5.3.13-gnu/drivers/gpu/drm/i915/i915_pmu.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/gpu/drm/i915/i915_pmu.c	2019-11-29 04:08:31.000000000 -0500
@@ -833,8 +833,8 @@ create_event_attributes(struct drm_i915_
 		const char *name;
 		const char *unit;
 	} events[] = {
-		__event(I915_PMU_ACTUAL_FREQUENCY, "actual-frequency", "MHz"),
-		__event(I915_PMU_REQUESTED_FREQUENCY, "requested-frequency", "MHz"),
+		__event(I915_PMU_ACTUAL_FREQUENCY, "actual-frequency", "M"),
+		__event(I915_PMU_REQUESTED_FREQUENCY, "requested-frequency", "M"),
 		__event(I915_PMU_INTERRUPTS, "interrupts", NULL),
 		__event(I915_PMU_RC6_RESIDENCY, "rc6-residency", "ns"),
 	};
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/md/dm-crypt.c linux-libre-5.3.14-gnu/drivers/md/dm-crypt.c
--- linux-libre-5.3.13-gnu/drivers/md/dm-crypt.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/md/dm-crypt.c	2019-11-29 04:08:31.000000000 -0500
@@ -2911,21 +2911,18 @@ static int crypt_ctr(struct dm_target *t
 	}
 
 	ret = -ENOMEM;
-	cc->io_queue = alloc_workqueue("kcryptd_io/%s",
-				       WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
-				       1, devname);
+	cc->io_queue = alloc_workqueue("kcryptd_io/%s", WQ_MEM_RECLAIM, 1, devname);
 	if (!cc->io_queue) {
 		ti->error = "Couldn't create kcryptd io queue";
 		goto bad;
 	}
 
 	if (test_bit(DM_CRYPT_SAME_CPU, &cc->flags))
-		cc->crypt_queue = alloc_workqueue("kcryptd/%s",
-						  WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
+		cc->crypt_queue = alloc_workqueue("kcryptd/%s", WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM,
 						  1, devname);
 	else
 		cc->crypt_queue = alloc_workqueue("kcryptd/%s",
-						  WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND,
+						  WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND,
 						  num_online_cpus(), devname);
 	if (!cc->crypt_queue) {
 		ti->error = "Couldn't create kcryptd queue";
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/md/raid10.c linux-libre-5.3.14-gnu/drivers/md/raid10.c
--- linux-libre-5.3.13-gnu/drivers/md/raid10.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/md/raid10.c	2019-11-29 04:08:31.000000000 -0500
@@ -191,7 +191,7 @@ static void * r10buf_pool_alloc(gfp_t gf
 
 out_free_pages:
 	while (--j >= 0)
-		resync_free_pages(&rps[j * 2]);
+		resync_free_pages(&rps[j]);
 
 	j = 0;
 out_free_bio:
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-kthread-cap.c linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-kthread-cap.c
--- linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-kthread-cap.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-kthread-cap.c	2019-11-29 04:08:31.000000000 -0500
@@ -796,7 +796,11 @@ static int vivid_thread_vid_cap(void *da
 		if (kthread_should_stop())
 			break;
 
-		mutex_lock(&dev->mutex);
+		if (!mutex_trylock(&dev->mutex)) {
+			schedule_timeout_uninterruptible(1);
+			continue;
+		}
+
 		cur_jiffies = jiffies;
 		if (dev->cap_seq_resync) {
 			dev->jiffies_vid_cap = cur_jiffies;
@@ -956,8 +960,6 @@ void vivid_stop_generating_vid_cap(struc
 
 	/* shutdown control thread */
 	vivid_grab_controls(dev, false);
-	mutex_unlock(&dev->mutex);
 	kthread_stop(dev->kthread_vid_cap);
 	dev->kthread_vid_cap = NULL;
-	mutex_lock(&dev->mutex);
 }
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-kthread-out.c linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-kthread-out.c
--- linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-kthread-out.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-kthread-out.c	2019-11-29 04:08:31.000000000 -0500
@@ -143,7 +143,11 @@ static int vivid_thread_vid_out(void *da
 		if (kthread_should_stop())
 			break;
 
-		mutex_lock(&dev->mutex);
+		if (!mutex_trylock(&dev->mutex)) {
+			schedule_timeout_uninterruptible(1);
+			continue;
+		}
+
 		cur_jiffies = jiffies;
 		if (dev->out_seq_resync) {
 			dev->jiffies_vid_out = cur_jiffies;
@@ -301,8 +305,6 @@ void vivid_stop_generating_vid_out(struc
 
 	/* shutdown control thread */
 	vivid_grab_controls(dev, false);
-	mutex_unlock(&dev->mutex);
 	kthread_stop(dev->kthread_vid_out);
 	dev->kthread_vid_out = NULL;
-	mutex_lock(&dev->mutex);
 }
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-sdr-cap.c linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-sdr-cap.c
--- linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-sdr-cap.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-sdr-cap.c	2019-11-29 04:08:31.000000000 -0500
@@ -141,7 +141,11 @@ static int vivid_thread_sdr_cap(void *da
 		if (kthread_should_stop())
 			break;
 
-		mutex_lock(&dev->mutex);
+		if (!mutex_trylock(&dev->mutex)) {
+			schedule_timeout_uninterruptible(1);
+			continue;
+		}
+
 		cur_jiffies = jiffies;
 		if (dev->sdr_cap_seq_resync) {
 			dev->jiffies_sdr_cap = cur_jiffies;
@@ -303,10 +307,8 @@ static void sdr_cap_stop_streaming(struc
 	}
 
 	/* shutdown control thread */
-	mutex_unlock(&dev->mutex);
 	kthread_stop(dev->kthread_sdr_cap);
 	dev->kthread_sdr_cap = NULL;
-	mutex_lock(&dev->mutex);
 }
 
 static void sdr_cap_buf_request_complete(struct vb2_buffer *vb)
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-vid-cap.c linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-vid-cap.c
--- linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-vid-cap.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-vid-cap.c	2019-11-29 04:08:31.000000000 -0500
@@ -223,9 +223,6 @@ static int vid_cap_start_streaming(struc
 	if (vb2_is_streaming(&dev->vb_vid_out_q))
 		dev->can_loop_video = vivid_vid_can_loop(dev);
 
-	if (dev->kthread_vid_cap)
-		return 0;
-
 	dev->vid_cap_seq_count = 0;
 	dprintk(dev, 1, "%s\n", __func__);
 	for (i = 0; i < VIDEO_MAX_FRAME; i++)
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-vid-out.c linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-vid-out.c
--- linux-libre-5.3.13-gnu/drivers/media/platform/vivid/vivid-vid-out.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/platform/vivid/vivid-vid-out.c	2019-11-29 04:08:31.000000000 -0500
@@ -161,9 +161,6 @@ static int vid_out_start_streaming(struc
 	if (vb2_is_streaming(&dev->vb_vid_cap_q))
 		dev->can_loop_video = vivid_vid_can_loop(dev);
 
-	if (dev->kthread_vid_out)
-		return 0;
-
 	dev->vid_out_seq_count = 0;
 	dprintk(dev, 1, "%s\n", __func__);
 	if (dev->start_streaming_error) {
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/rc/imon.c linux-libre-5.3.14-gnu/drivers/media/rc/imon.c
--- linux-libre-5.3.13-gnu/drivers/media/rc/imon.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/rc/imon.c	2019-11-29 04:08:31.000000000 -0500
@@ -1598,8 +1598,7 @@ static void imon_incoming_packet(struct
 	spin_unlock_irqrestore(&ictx->kc_lock, flags);
 
 	/* send touchscreen events through input subsystem if touchpad data */
-	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
-	    buf[7] == 0x86) {
+	if (ictx->touch && len == 8 && buf[7] == 0x86) {
 		imon_touch_event(ictx, buf);
 		return;
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/rc/mceusb.c linux-libre-5.3.14-gnu/drivers/media/rc/mceusb.c
--- linux-libre-5.3.13-gnu/drivers/media/rc/mceusb.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/rc/mceusb.c	2019-11-29 04:08:31.000000000 -0500
@@ -562,7 +562,7 @@ static int mceusb_cmd_datasize(u8 cmd, u
 			datasize = 4;
 			break;
 		case MCE_CMD_G_REVISION:
-			datasize = 2;
+			datasize = 4;
 			break;
 		case MCE_RSP_EQWAKESUPPORT:
 		case MCE_RSP_GETWAKESOURCE:
@@ -598,14 +598,9 @@ static void mceusb_dev_printdata(struct
 	char *inout;
 	u8 cmd, subcmd, *data;
 	struct device *dev = ir->dev;
-	int start, skip = 0;
 	u32 carrier, period;
 
-	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
-	if (ir->flags.microsoft_gen1 && !out && !offset)
-		skip = 2;
-
-	if (len <= skip)
+	if (offset < 0 || offset >= buf_len)
 		return;
 
 	dev_dbg(dev, "%cx data[%d]: %*ph (len=%d sz=%d)",
@@ -614,11 +609,32 @@ static void mceusb_dev_printdata(struct
 
 	inout = out ? "Request" : "Got";
 
-	start  = offset + skip;
-	cmd    = buf[start] & 0xff;
-	subcmd = buf[start + 1] & 0xff;
-	data = buf + start + 2;
+	cmd    = buf[offset];
+	subcmd = (offset + 1 < buf_len) ? buf[offset + 1] : 0;
+	data   = &buf[offset] + 2;
+
+	/* Trace meaningless 0xb1 0x60 header bytes on original receiver */
+	if (ir->flags.microsoft_gen1 && !out && !offset) {
+		dev_dbg(dev, "MCE gen 1 header");
+		return;
+	}
+
+	/* Trace IR data header or trailer */
+	if (cmd != MCE_CMD_PORT_IR &&
+	    (cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA) {
+		if (cmd == MCE_IRDATA_TRAILER)
+			dev_dbg(dev, "End of raw IR data");
+		else
+			dev_dbg(dev, "Raw IR data, %d pulse/space samples",
+				cmd & MCE_PACKET_LENGTH_MASK);
+		return;
+	}
 
+	/* Unexpected end of buffer? */
+	if (offset + len > buf_len)
+		return;
+
+	/* Decode MCE command/response */
 	switch (cmd) {
 	case MCE_CMD_NULL:
 		if (subcmd == MCE_CMD_NULL)
@@ -642,7 +658,7 @@ static void mceusb_dev_printdata(struct
 				dev_dbg(dev, "Get hw/sw rev?");
 			else
 				dev_dbg(dev, "hw/sw rev %*ph",
-					4, &buf[start + 2]);
+					4, &buf[offset + 2]);
 			break;
 		case MCE_CMD_RESUME:
 			dev_dbg(dev, "Device resume requested");
@@ -744,13 +760,6 @@ static void mceusb_dev_printdata(struct
 	default:
 		break;
 	}
-
-	if (cmd == MCE_IRDATA_TRAILER)
-		dev_dbg(dev, "End of raw IR data");
-	else if ((cmd != MCE_CMD_PORT_IR) &&
-		 ((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA))
-		dev_dbg(dev, "Raw IR data, %d pulse/space samples",
-			cmd & MCE_PACKET_LENGTH_MASK);
 #endif
 }
 
@@ -1127,32 +1136,62 @@ static int mceusb_set_rx_carrier_report(
 }
 
 /*
+ * Handle PORT_SYS/IR command response received from the MCE device.
+ *
+ * Assumes single response with all its data (not truncated)
+ * in buf_in[]. The response itself determines its total length
+ * (mceusb_cmd_datasize() + 2) and hence the minimum size of buf_in[].
+ *
  * We don't do anything but print debug spew for many of the command bits
  * we receive from the hardware, but some of them are useful information
  * we want to store so that we can use them.
  */
-static void mceusb_handle_command(struct mceusb_dev *ir, int index)
+static void mceusb_handle_command(struct mceusb_dev *ir, u8 *buf_in)
 {
+	u8 cmd = buf_in[0];
+	u8 subcmd = buf_in[1];
+	u8 *hi = &buf_in[2];		/* read only when required */
+	u8 *lo = &buf_in[3];		/* read only when required */
 	struct ir_raw_event rawir = {};
-	u8 hi = ir->buf_in[index + 1] & 0xff;
-	u8 lo = ir->buf_in[index + 2] & 0xff;
 	u32 carrier_cycles;
 	u32 cycles_fix;
 
-	switch (ir->buf_in[index]) {
-	/* the one and only 5-byte return value command */
-	case MCE_RSP_GETPORTSTATUS:
-		if ((ir->buf_in[index + 4] & 0xff) == 0x00)
-			ir->txports_cabled |= 1 << hi;
-		break;
+	if (cmd == MCE_CMD_PORT_SYS) {
+		switch (subcmd) {
+		/* the one and only 5-byte return value command */
+		case MCE_RSP_GETPORTSTATUS:
+			if (buf_in[5] == 0)
+				ir->txports_cabled |= 1 << *hi;
+			break;
+
+		/* 1-byte return value commands */
+		case MCE_RSP_EQEMVER:
+			ir->emver = *hi;
+			break;
+
+		/* No return value commands */
+		case MCE_RSP_CMD_ILLEGAL:
+			ir->need_reset = true;
+			break;
 
+		default:
+			break;
+		}
+
+		return;
+	}
+
+	if (cmd != MCE_CMD_PORT_IR)
+		return;
+
+	switch (subcmd) {
 	/* 2-byte return value commands */
 	case MCE_RSP_EQIRTIMEOUT:
-		ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
+		ir->rc->timeout = US_TO_NS((*hi << 8 | *lo) * MCE_TIME_UNIT);
 		break;
 	case MCE_RSP_EQIRNUMPORTS:
-		ir->num_txports = hi;
-		ir->num_rxports = lo;
+		ir->num_txports = *hi;
+		ir->num_rxports = *lo;
 		break;
 	case MCE_RSP_EQIRRXCFCNT:
 		/*
@@ -1165,7 +1204,7 @@ static void mceusb_handle_command(struct
 		 */
 		if (ir->carrier_report_enabled && ir->learning_active &&
 		    ir->pulse_tunit > 0) {
-			carrier_cycles = (hi << 8 | lo);
+			carrier_cycles = (*hi << 8 | *lo);
 			/*
 			 * Adjust carrier cycle count by adding
 			 * 1 missed count per pulse "on"
@@ -1183,24 +1222,24 @@ static void mceusb_handle_command(struct
 		break;
 
 	/* 1-byte return value commands */
-	case MCE_RSP_EQEMVER:
-		ir->emver = hi;
-		break;
 	case MCE_RSP_EQIRTXPORTS:
-		ir->tx_mask = hi;
+		ir->tx_mask = *hi;
 		break;
 	case MCE_RSP_EQIRRXPORTEN:
-		ir->learning_active = ((hi & 0x02) == 0x02);
-		if (ir->rxports_active != hi) {
+		ir->learning_active = ((*hi & 0x02) == 0x02);
+		if (ir->rxports_active != *hi) {
 			dev_info(ir->dev, "%s-range (0x%x) receiver active",
-				 ir->learning_active ? "short" : "long", hi);
-			ir->rxports_active = hi;
+				 ir->learning_active ? "short" : "long", *hi);
+			ir->rxports_active = *hi;
 		}
 		break;
+
+	/* No return value commands */
 	case MCE_RSP_CMD_ILLEGAL:
 	case MCE_RSP_TX_TIMEOUT:
 		ir->need_reset = true;
 		break;
+
 	default:
 		break;
 	}
@@ -1226,7 +1265,8 @@ static void mceusb_process_ir_data(struc
 			ir->rem = mceusb_cmd_datasize(ir->cmd, ir->buf_in[i]);
 			mceusb_dev_printdata(ir, ir->buf_in, buf_len, i - 1,
 					     ir->rem + 2, false);
-			mceusb_handle_command(ir, i);
+			if (i + ir->rem < buf_len)
+				mceusb_handle_command(ir, &ir->buf_in[i - 1]);
 			ir->parser_state = CMD_DATA;
 			break;
 		case PARSE_IRDATA:
@@ -1255,15 +1295,22 @@ static void mceusb_process_ir_data(struc
 			ir->rem--;
 			break;
 		case CMD_HEADER:
-			/* decode mce packets of the form (84),AA,BB,CC,DD */
-			/* IR data packets can span USB messages - rem */
 			ir->cmd = ir->buf_in[i];
 			if ((ir->cmd == MCE_CMD_PORT_IR) ||
 			    ((ir->cmd & MCE_PORT_MASK) !=
 			     MCE_COMMAND_IRDATA)) {
+				/*
+				 * got PORT_SYS, PORT_IR, or unknown
+				 * command response prefix
+				 */
 				ir->parser_state = SUBCMD;
 				continue;
 			}
+			/*
+			 * got IR data prefix (0x80 + num_bytes)
+			 * decode MCE packets of the form {0x83, AA, BB, CC}
+			 * IR data packets can span USB messages
+			 */
 			ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
 			mceusb_dev_printdata(ir, ir->buf_in, buf_len,
 					     i, ir->rem + 1, false);
@@ -1287,6 +1334,14 @@ static void mceusb_process_ir_data(struc
 		if (ir->parser_state != CMD_HEADER && !ir->rem)
 			ir->parser_state = CMD_HEADER;
 	}
+
+	/*
+	 * Accept IR data spanning multiple rx buffers.
+	 * Reject MCE command response spanning multiple rx buffers.
+	 */
+	if (ir->parser_state != PARSE_IRDATA || !ir->rem)
+		ir->parser_state = CMD_HEADER;
+
 	if (event) {
 		dev_dbg(ir->dev, "processed IR data");
 		ir_raw_event_handle(ir->rc);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/usb/b2c2/flexcop-usb.c linux-libre-5.3.14-gnu/drivers/media/usb/b2c2/flexcop-usb.c
--- linux-libre-5.3.13-gnu/drivers/media/usb/b2c2/flexcop-usb.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/usb/b2c2/flexcop-usb.c	2019-11-29 04:08:31.000000000 -0500
@@ -538,6 +538,9 @@ static int flexcop_usb_probe(struct usb_
 	struct flexcop_device *fc = NULL;
 	int ret;
 
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
 		err("out of memory\n");
 		return -ENOMEM;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/usb/dvb-usb/cxusb.c linux-libre-5.3.14-gnu/drivers/media/usb/dvb-usb/cxusb.c
--- linux-libre-5.3.13-gnu/drivers/media/usb/dvb-usb/cxusb.c	2019-11-24 03:35:56.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/usb/dvb-usb/cxusb.c	2019-11-29 07:42:48.000000000 -0500
@@ -542,7 +542,8 @@ static int cxusb_rc_query(struct dvb_usb
 {
 	u8 ircode[4];
 
-	cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4);
+	if (cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4) < 0)
+		return 0;
 
 	if (ircode[2] || ircode[3])
 		rc_keydown(d->rc_dev, RC_PROTO_NEC,
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/usb/usbvision/usbvision-video.c linux-libre-5.3.14-gnu/drivers/media/usb/usbvision/usbvision-video.c
--- linux-libre-5.3.13-gnu/drivers/media/usb/usbvision/usbvision-video.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/usb/usbvision/usbvision-video.c	2019-11-29 04:08:31.000000000 -0500
@@ -314,6 +314,10 @@ static int usbvision_v4l2_open(struct fi
 	if (mutex_lock_interruptible(&usbvision->v4l2_lock))
 		return -ERESTARTSYS;
 
+	if (usbvision->remove_pending) {
+		err_code = -ENODEV;
+		goto unlock;
+	}
 	if (usbvision->user) {
 		err_code = -EBUSY;
 	} else {
@@ -377,6 +381,7 @@ unlock:
 static int usbvision_v4l2_close(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
+	int r;
 
 	PDEBUG(DBG_IO, "close");
 
@@ -391,9 +396,10 @@ static int usbvision_v4l2_close(struct f
 	usbvision_scratch_free(usbvision);
 
 	usbvision->user--;
+	r = usbvision->remove_pending;
 	mutex_unlock(&usbvision->v4l2_lock);
 
-	if (usbvision->remove_pending) {
+	if (r) {
 		printk(KERN_INFO "%s: Final disconnect\n", __func__);
 		usbvision_release(usbvision);
 		return 0;
@@ -453,6 +459,9 @@ static int vidioc_querycap(struct file *
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
+	if (!usbvision->dev)
+		return -ENODEV;
+
 	strscpy(vc->driver, "USBVision", sizeof(vc->driver));
 	strscpy(vc->card,
 		usbvision_device_data[usbvision->dev_model].model_string,
@@ -1073,6 +1082,11 @@ static int usbvision_radio_open(struct f
 
 	if (mutex_lock_interruptible(&usbvision->v4l2_lock))
 		return -ERESTARTSYS;
+
+	if (usbvision->remove_pending) {
+		err_code = -ENODEV;
+		goto out;
+	}
 	err_code = v4l2_fh_open(file);
 	if (err_code)
 		goto out;
@@ -1105,21 +1119,24 @@ out:
 static int usbvision_radio_close(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
+	int r;
 
 	PDEBUG(DBG_IO, "");
 
 	mutex_lock(&usbvision->v4l2_lock);
 	/* Set packet size to 0 */
 	usbvision->iface_alt = 0;
-	usb_set_interface(usbvision->dev, usbvision->iface,
-				    usbvision->iface_alt);
+	if (usbvision->dev)
+		usb_set_interface(usbvision->dev, usbvision->iface,
+				  usbvision->iface_alt);
 
 	usbvision_audio_off(usbvision);
 	usbvision->radio = 0;
 	usbvision->user--;
+	r = usbvision->remove_pending;
 	mutex_unlock(&usbvision->v4l2_lock);
 
-	if (usbvision->remove_pending) {
+	if (r) {
 		printk(KERN_INFO "%s: Final disconnect\n", __func__);
 		v4l2_fh_release(file);
 		usbvision_release(usbvision);
@@ -1551,6 +1568,7 @@ err_usb:
 static void usbvision_disconnect(struct usb_interface *intf)
 {
 	struct usb_usbvision *usbvision = to_usbvision(usb_get_intfdata(intf));
+	int u;
 
 	PDEBUG(DBG_PROBE, "");
 
@@ -1567,13 +1585,14 @@ static void usbvision_disconnect(struct
 	v4l2_device_disconnect(&usbvision->v4l2_dev);
 	usbvision_i2c_unregister(usbvision);
 	usbvision->remove_pending = 1;	/* Now all ISO data will be ignored */
+	u = usbvision->user;
 
 	usb_put_dev(usbvision->dev);
 	usbvision->dev = NULL;	/* USB device is no more */
 
 	mutex_unlock(&usbvision->v4l2_lock);
 
-	if (usbvision->user) {
+	if (u) {
 		printk(KERN_INFO "%s: In use, disconnect pending\n",
 		       __func__);
 		wake_up_interruptible(&usbvision->wait_frame);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/media/usb/uvc/uvc_driver.c linux-libre-5.3.14-gnu/drivers/media/usb/uvc/uvc_driver.c
--- linux-libre-5.3.13-gnu/drivers/media/usb/uvc/uvc_driver.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/media/usb/uvc/uvc_driver.c	2019-11-29 04:08:31.000000000 -0500
@@ -2151,6 +2151,20 @@ static int uvc_probe(struct usb_interfac
 			   sizeof(dev->name) - len);
 	}
 
+	/* Initialize the media device. */
+#ifdef CONFIG_MEDIA_CONTROLLER
+	dev->mdev.dev = &intf->dev;
+	strscpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model));
+	if (udev->serial)
+		strscpy(dev->mdev.serial, udev->serial,
+			sizeof(dev->mdev.serial));
+	usb_make_path(udev, dev->mdev.bus_info, sizeof(dev->mdev.bus_info));
+	dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
+	media_device_init(&dev->mdev);
+
+	dev->vdev.mdev = &dev->mdev;
+#endif
+
 	/* Parse the Video Class control descriptor. */
 	if (uvc_parse_control(dev) < 0) {
 		uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
@@ -2171,19 +2185,7 @@ static int uvc_probe(struct usb_interfac
 			"linux-uvc-devel mailing list.\n");
 	}
 
-	/* Initialize the media device and register the V4L2 device. */
-#ifdef CONFIG_MEDIA_CONTROLLER
-	dev->mdev.dev = &intf->dev;
-	strscpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model));
-	if (udev->serial)
-		strscpy(dev->mdev.serial, udev->serial,
-			sizeof(dev->mdev.serial));
-	usb_make_path(udev, dev->mdev.bus_info, sizeof(dev->mdev.bus_info));
-	dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
-	media_device_init(&dev->mdev);
-
-	dev->vdev.mdev = &dev->mdev;
-#endif
+	/* Register the V4L2 device. */
 	if (v4l2_device_register(&intf->dev, &dev->vdev) < 0)
 		goto error;
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/google/gve/gve_tx.c linux-libre-5.3.14-gnu/drivers/net/ethernet/google/gve/gve_tx.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/google/gve/gve_tx.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/google/gve/gve_tx.c	2019-11-29 04:08:31.000000000 -0500
@@ -393,12 +393,13 @@ static void gve_tx_fill_seg_desc(union g
 static void gve_dma_sync_for_device(struct device *dev, dma_addr_t *page_buses,
 				    u64 iov_offset, u64 iov_len)
 {
+	u64 last_page = (iov_offset + iov_len - 1) / PAGE_SIZE;
+	u64 first_page = iov_offset / PAGE_SIZE;
 	dma_addr_t dma;
-	u64 addr;
+	u64 page;
 
-	for (addr = iov_offset; addr < iov_offset + iov_len;
-	     addr += PAGE_SIZE) {
-		dma = page_buses[addr / PAGE_SIZE];
+	for (page = first_page; page <= last_page; page++) {
+		dma = page_buses[page];
 		dma_sync_single_for_device(dev, dma, PAGE_SIZE, DMA_TO_DEVICE);
 	}
 }
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c	2019-11-29 04:08:31.000000000 -0500
@@ -1745,6 +1745,7 @@ static int mlx4_en_get_rxnfc(struct net_
 		err = mlx4_en_get_flow(dev, cmd, cmd->fs.location);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
+		cmd->data = MAX_NUM_OF_FS_RULES;
 		while ((!err || err == -ENOENT) && priority < cmd->rule_cnt) {
 			err = mlx4_en_get_flow(dev, cmd, i);
 			if (!err)
@@ -1811,6 +1812,7 @@ static int mlx4_en_set_channels(struct n
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_port_profile new_prof;
 	struct mlx4_en_priv *tmp;
+	int total_tx_count;
 	int port_up = 0;
 	int xdp_count;
 	int err = 0;
@@ -1825,13 +1827,12 @@ static int mlx4_en_set_channels(struct n
 
 	mutex_lock(&mdev->state_lock);
 	xdp_count = priv->tx_ring_num[TX_XDP] ? channel->rx_count : 0;
-	if (channel->tx_count * priv->prof->num_up + xdp_count >
-	    priv->mdev->profile.max_num_tx_rings_p_up * priv->prof->num_up) {
+	total_tx_count = channel->tx_count * priv->prof->num_up + xdp_count;
+	if (total_tx_count > MAX_TX_RINGS) {
 		err = -EINVAL;
 		en_err(priv,
 		       "Total number of TX and XDP rings (%d) exceeds the maximum supported (%d)\n",
-		       channel->tx_count * priv->prof->num_up  + xdp_count,
-		       MAX_TX_RINGS);
+		       total_tx_count, MAX_TX_RINGS);
 		goto out;
 	}
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx4/en_netdev.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx4/en_netdev.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx4/en_netdev.c	2019-11-29 04:08:31.000000000 -0500
@@ -91,6 +91,7 @@ int mlx4_en_alloc_tx_queue_per_tc(struct
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_port_profile new_prof;
 	struct mlx4_en_priv *tmp;
+	int total_count;
 	int port_up = 0;
 	int err = 0;
 
@@ -104,6 +105,14 @@ int mlx4_en_alloc_tx_queue_per_tc(struct
 				      MLX4_EN_NUM_UP_HIGH;
 	new_prof.tx_ring_num[TX] = new_prof.num_tx_rings_p_up *
 				   new_prof.num_up;
+	total_count = new_prof.tx_ring_num[TX] + new_prof.tx_ring_num[TX_XDP];
+	if (total_count > MAX_TX_RINGS) {
+		err = -EINVAL;
+		en_err(priv,
+		       "Total number of TX and XDP rings (%d) exceeds the maximum supported (%d)\n",
+		       total_count, MAX_TX_RINGS);
+		goto out;
+	}
 	err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof, true);
 	if (err)
 		goto out;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c	2019-11-29 04:08:31.000000000 -0500
@@ -232,12 +232,15 @@ int mlx5e_tc_tun_create_header_ipv4(stru
 	if (max_encap_size < ipv4_encap_size) {
 		mlx5_core_warn(priv->mdev, "encap size %d too big, max supported is %d\n",
 			       ipv4_encap_size, max_encap_size);
-		return -EOPNOTSUPP;
+		err = -EOPNOTSUPP;
+		goto out;
 	}
 
 	encap_header = kzalloc(ipv4_encap_size, GFP_KERNEL);
-	if (!encap_header)
-		return -ENOMEM;
+	if (!encap_header) {
+		err = -ENOMEM;
+		goto out;
+	}
 
 	/* used by mlx5e_detach_encap to lookup a neigh hash table
 	 * entry in the neigh hash table when a user deletes a rule
@@ -348,12 +351,15 @@ int mlx5e_tc_tun_create_header_ipv6(stru
 	if (max_encap_size < ipv6_encap_size) {
 		mlx5_core_warn(priv->mdev, "encap size %d too big, max supported is %d\n",
 			       ipv6_encap_size, max_encap_size);
-		return -EOPNOTSUPP;
+		err = -EOPNOTSUPP;
+		goto out;
 	}
 
 	encap_header = kzalloc(ipv6_encap_size, GFP_KERNEL);
-	if (!encap_header)
-		return -ENOMEM;
+	if (!encap_header) {
+		err = -ENOMEM;
+		goto out;
+	}
 
 	/* used by mlx5e_detach_encap to lookup a neigh hash table
 	 * entry in the neigh hash table when a user deletes a rule
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c	2019-11-29 04:08:31.000000000 -0500
@@ -708,9 +708,9 @@ static int get_fec_supported_advertised(
 
 static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings *link_ksettings,
 						   u32 eth_proto_cap,
-						   u8 connector_type)
+						   u8 connector_type, bool ext)
 {
-	if (!connector_type || connector_type >= MLX5E_CONNECTOR_TYPE_NUMBER) {
+	if ((!connector_type && !ext) || connector_type >= MLX5E_CONNECTOR_TYPE_NUMBER) {
 		if (eth_proto_cap & (MLX5E_PROT_MASK(MLX5E_10GBASE_CR)
 				   | MLX5E_PROT_MASK(MLX5E_10GBASE_SR)
 				   | MLX5E_PROT_MASK(MLX5E_40GBASE_CR4)
@@ -842,9 +842,9 @@ static int ptys2connector_type[MLX5E_CON
 		[MLX5E_PORT_OTHER]              = PORT_OTHER,
 	};
 
-static u8 get_connector_port(u32 eth_proto, u8 connector_type)
+static u8 get_connector_port(u32 eth_proto, u8 connector_type, bool ext)
 {
-	if (connector_type && connector_type < MLX5E_CONNECTOR_TYPE_NUMBER)
+	if ((connector_type || ext) && connector_type < MLX5E_CONNECTOR_TYPE_NUMBER)
 		return ptys2connector_type[connector_type];
 
 	if (eth_proto &
@@ -945,9 +945,9 @@ int mlx5e_ethtool_get_link_ksettings(str
 	eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
 
 	link_ksettings->base.port = get_connector_port(eth_proto_oper,
-						       connector_type);
+						       connector_type, ext);
 	ptys2ethtool_supported_advertised_port(link_ksettings, eth_proto_admin,
-					       connector_type);
+					       connector_type, ext);
 	get_lp_advertising(mdev, eth_proto_lp, link_ksettings);
 
 	if (an_status == MLX5_AN_COMPLETE)
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c	2019-11-29 04:08:31.000000000 -0500
@@ -2044,7 +2044,7 @@ int mlx5_eswitch_set_vport_state(struct
 
 unlock:
 	mutex_unlock(&esw->state_lock);
-	return 0;
+	return err;
 }
 
 int mlx5_eswitch_get_vport_config(struct mlx5_eswitch *esw,
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c	2019-11-29 04:08:31.000000000 -0500
@@ -549,7 +549,7 @@ static void del_sw_flow_group(struct fs_
 
 	rhashtable_destroy(&fg->ftes_hash);
 	ida_destroy(&fg->fte_allocator);
-	if (ft->autogroup.active)
+	if (ft->autogroup.active && fg->max_ftes == ft->autogroup.group_size)
 		ft->autogroup.num_groups--;
 	err = rhltable_remove(&ft->fgs_hash,
 			      &fg->hash,
@@ -1095,6 +1095,8 @@ mlx5_create_auto_grouped_flow_table(stru
 
 	ft->autogroup.active = true;
 	ft->autogroup.required_groups = max_num_groups;
+	/* We save place for flow groups in addition to max types */
+	ft->autogroup.group_size = ft->max_fte / (max_num_groups + 1);
 
 	return ft;
 }
@@ -1297,8 +1299,7 @@ static struct mlx5_flow_group *alloc_aut
 		return ERR_PTR(-ENOENT);
 
 	if (ft->autogroup.num_groups < ft->autogroup.required_groups)
-		/* We save place for flow groups in addition to max types */
-		group_size = ft->max_fte / (ft->autogroup.required_groups + 1);
+		group_size = ft->autogroup.group_size;
 
 	/*  ft->max_fte == ft->autogroup.max_types */
 	if (group_size == 0)
@@ -1325,7 +1326,8 @@ static struct mlx5_flow_group *alloc_aut
 	if (IS_ERR(fg))
 		goto out;
 
-	ft->autogroup.num_groups++;
+	if (group_size == ft->autogroup.group_size)
+		ft->autogroup.num_groups++;
 
 out:
 	return fg;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h	2019-11-29 04:08:31.000000000 -0500
@@ -137,6 +137,7 @@ struct mlx5_flow_table {
 	struct {
 		bool			active;
 		unsigned int		required_groups;
+		unsigned int		group_size;
 		unsigned int		num_groups;
 	} autogroup;
 	/* Protect fwd_rules */
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/main.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/main.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlx5/core/main.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlx5/core/main.c	2019-11-29 04:08:31.000000000 -0500
@@ -1552,6 +1552,7 @@ static const struct pci_device_id mlx5_c
 	{ PCI_VDEVICE(MELLANOX, 0x101c), MLX5_PCI_DEV_IS_VF},	/* ConnectX-6 VF */
 	{ PCI_VDEVICE(MELLANOX, 0x101d) },			/* ConnectX-6 Dx */
 	{ PCI_VDEVICE(MELLANOX, 0x101e), MLX5_PCI_DEV_IS_VF},	/* ConnectX Family mlx5Gen Virtual Function */
+	{ PCI_VDEVICE(MELLANOX, 0x101f) },			/* ConnectX-6 LX */
 	{ PCI_VDEVICE(MELLANOX, 0xa2d2) },			/* BlueField integrated ConnectX-5 network controller */
 	{ PCI_VDEVICE(MELLANOX, 0xa2d3), MLX5_PCI_DEV_IS_VF},	/* BlueField integrated ConnectX-5 network controller VF */
 	{ PCI_VDEVICE(MELLANOX, 0xa2d6) },			/* BlueField-2 integrated ConnectX-6 Dx network controller */
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c	2019-11-29 04:08:31.000000000 -0500
@@ -66,6 +66,8 @@ retry:
 		return err;
 
 	if (fsm_state_err != MLXFW_FSM_STATE_ERR_OK) {
+		fsm_state_err = min_t(enum mlxfw_fsm_state_err,
+				      fsm_state_err, MLXFW_FSM_STATE_ERR_MAX);
 		pr_err("Firmware flash failed: %s\n",
 		       mlxfw_fsm_state_err_str[fsm_state_err]);
 		NL_SET_ERR_MSG_MOD(extack, "Firmware flash failed");
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c	2019-11-29 04:08:31.000000000 -0500
@@ -994,7 +994,7 @@ u32 mlxsw_sp_ipip_dev_ul_tb_id(const str
 	if (d)
 		return l3mdev_fib_table(d) ? : RT_TABLE_MAIN;
 	else
-		return l3mdev_fib_table(ol_dev) ? : RT_TABLE_MAIN;
+		return RT_TABLE_MAIN;
 }
 
 static struct mlxsw_sp_rif *
@@ -1598,27 +1598,10 @@ static int mlxsw_sp_netdevice_ipip_ol_vr
 {
 	struct mlxsw_sp_ipip_entry *ipip_entry =
 		mlxsw_sp_ipip_entry_find_by_ol_dev(mlxsw_sp, ol_dev);
-	enum mlxsw_sp_l3proto ul_proto;
-	union mlxsw_sp_l3addr saddr;
-	u32 ul_tb_id;
 
 	if (!ipip_entry)
 		return 0;
 
-	/* For flat configuration cases, moving overlay to a different VRF might
-	 * cause local address conflict, and the conflicting tunnels need to be
-	 * demoted.
-	 */
-	ul_tb_id = mlxsw_sp_ipip_dev_ul_tb_id(ol_dev);
-	ul_proto = mlxsw_sp->router->ipip_ops_arr[ipip_entry->ipipt]->ul_proto;
-	saddr = mlxsw_sp_ipip_netdev_saddr(ul_proto, ol_dev);
-	if (mlxsw_sp_ipip_demote_tunnel_by_saddr(mlxsw_sp, ul_proto,
-						 saddr, ul_tb_id,
-						 ipip_entry)) {
-		mlxsw_sp_ipip_entry_demote_tunnel(mlxsw_sp, ipip_entry);
-		return 0;
-	}
-
 	return __mlxsw_sp_ipip_entry_update_tunnel(mlxsw_sp, ipip_entry,
 						   true, false, false, extack);
 }
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/ethernet/sfc/ptp.c linux-libre-5.3.14-gnu/drivers/net/ethernet/sfc/ptp.c
--- linux-libre-5.3.13-gnu/drivers/net/ethernet/sfc/ptp.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/ethernet/sfc/ptp.c	2019-11-29 04:08:31.000000000 -0500
@@ -1531,7 +1531,8 @@ void efx_ptp_remove(struct efx_nic *efx)
 	(void)efx_ptp_disable(efx);
 
 	cancel_work_sync(&efx->ptp_data->work);
-	cancel_work_sync(&efx->ptp_data->pps_work);
+	if (efx->ptp_data->pps_workwq)
+		cancel_work_sync(&efx->ptp_data->pps_work);
 
 	skb_queue_purge(&efx->ptp_data->rxq);
 	skb_queue_purge(&efx->ptp_data->txq);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/phy/mdio_bus.c linux-libre-5.3.14-gnu/drivers/net/phy/mdio_bus.c
--- linux-libre-5.3.13-gnu/drivers/net/phy/mdio_bus.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/phy/mdio_bus.c	2019-11-29 04:08:31.000000000 -0500
@@ -68,11 +68,12 @@ static int mdiobus_register_reset(struct
 	if (mdiodev->dev.of_node)
 		reset = devm_reset_control_get_exclusive(&mdiodev->dev,
 							 "phy");
-	if (PTR_ERR(reset) == -ENOENT ||
-	    PTR_ERR(reset) == -ENOTSUPP)
-		reset = NULL;
-	else if (IS_ERR(reset))
-		return PTR_ERR(reset);
+	if (IS_ERR(reset)) {
+		if (PTR_ERR(reset) == -ENOENT || PTR_ERR(reset) == -ENOTSUPP)
+			reset = NULL;
+		else
+			return PTR_ERR(reset);
+	}
 
 	mdiodev->reset_ctrl = reset;
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/pci.c linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/pci.c
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/pci.c	2019-11-24 03:48:30.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/pci.c	2019-11-29 07:56:02.000000000 -0500
@@ -3490,7 +3490,7 @@ static int ath10k_pci_probe(struct pci_d
 	struct ath10k_pci *ar_pci;
 	enum ath10k_hw_rev hw_rev;
 	struct ath10k_bus_params bus_params = {};
-	bool pci_ps;
+	bool pci_ps, is_qca988x = false;
 	int (*pci_soft_reset)(struct ath10k *ar);
 	int (*pci_hard_reset)(struct ath10k *ar);
 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3500,6 +3500,7 @@ static int ath10k_pci_probe(struct pci_d
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
+		is_qca988x = true;
 		pci_soft_reset = ath10k_pci_warm_reset;
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3619,25 +3620,34 @@ static int ath10k_pci_probe(struct pci_d
 		goto err_deinit_irq;
 	}
 
+	bus_params.dev_type = ATH10K_DEV_TYPE_LL;
+	bus_params.link_can_suspend = true;
+	/* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+	 * fall off the bus during chip_reset. These chips have the same pci
+	 * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+	 */
+	if (is_qca988x) {
+		bus_params.chip_id =
+			ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+		if (bus_params.chip_id != 0xffffffff) {
+			if (!ath10k_pci_chip_is_supported(pdev->device,
+							  bus_params.chip_id))
+				goto err_unsupported;
+		}
+	}
+
 	ret = ath10k_pci_chip_reset(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to reset chip: %d\n", ret);
 		goto err_free_irq;
 	}
 
-	bus_params.dev_type = ATH10K_DEV_TYPE_LL;
-	bus_params.link_can_suspend = true;
 	bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
-	if (bus_params.chip_id == 0xffffffff) {
-		ath10k_err(ar, "failed to get chip id\n");
-		goto err_free_irq;
-	}
+	if (bus_params.chip_id == 0xffffffff)
+		goto err_unsupported;
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
-		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
-			   pdev->device, bus_params.chip_id);
+	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
 		goto err_free_irq;
-	}
 
 	ret = ath10k_core_register(ar, &bus_params);
 	if (ret) {
@@ -3647,6 +3657,10 @@ static int ath10k_pci_probe(struct pci_d
 
 	return 0;
 
+err_unsupported:
+	ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+		   pdev->device, bus_params.chip_id);
+
 err_free_irq:
 	ath10k_pci_free_irq(ar);
 	ath10k_pci_rx_retry_sync(ar);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/qmi.c linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/qmi.c
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/qmi.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/qmi.c	2019-11-29 04:08:31.000000000 -0500
@@ -581,22 +581,29 @@ static int ath10k_qmi_host_cap_send_sync
 {
 	struct wlfw_host_cap_resp_msg_v01 resp = {};
 	struct wlfw_host_cap_req_msg_v01 req = {};
+	struct qmi_elem_info *req_ei;
 	struct ath10k *ar = qmi->ar;
+	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
 	struct qmi_txn txn;
 	int ret;
 
 	req.daemon_support_valid = 1;
 	req.daemon_support = 0;
 
-	ret = qmi_txn_init(&qmi->qmi_hdl, &txn,
-			   wlfw_host_cap_resp_msg_v01_ei, &resp);
+	ret = qmi_txn_init(&qmi->qmi_hdl, &txn, wlfw_host_cap_resp_msg_v01_ei,
+			   &resp);
 	if (ret < 0)
 		goto out;
 
+	if (test_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags))
+		req_ei = wlfw_host_cap_8bit_req_msg_v01_ei;
+	else
+		req_ei = wlfw_host_cap_req_msg_v01_ei;
+
 	ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
 			       QMI_WLFW_HOST_CAP_REQ_V01,
 			       WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN,
-			       wlfw_host_cap_req_msg_v01_ei, &req);
+			       req_ei, &req);
 	if (ret < 0) {
 		qmi_txn_cancel(&txn);
 		ath10k_err(ar, "failed to send host capability request: %d\n", ret);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c	2019-11-29 04:08:31.000000000 -0500
@@ -1988,6 +1988,28 @@ struct qmi_elem_info wlfw_host_cap_req_m
 	{}
 };
 
+struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[] = {
+	{
+		.data_type      = QMI_OPT_FLAG,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type     = NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct wlfw_host_cap_req_msg_v01,
+					   daemon_support_valid),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_1_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type     = NO_ARRAY,
+		.tlv_type       = 0x10,
+		.offset         = offsetof(struct wlfw_host_cap_req_msg_v01,
+					   daemon_support),
+	},
+	{}
+};
+
 struct qmi_elem_info wlfw_host_cap_resp_msg_v01_ei[] = {
 	{
 		.data_type      = QMI_STRUCT,
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h	2019-11-29 04:08:31.000000000 -0500
@@ -575,6 +575,7 @@ struct wlfw_host_cap_req_msg_v01 {
 
 #define WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN 189
 extern struct qmi_elem_info wlfw_host_cap_req_msg_v01_ei[];
+extern struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[];
 
 struct wlfw_host_cap_resp_msg_v01 {
 	struct qmi_response_type_v01 resp;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/snoc.c linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/snoc.c
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/snoc.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/snoc.c	2019-11-29 04:08:31.000000000 -0500
@@ -1261,6 +1261,15 @@ out:
 	return ret;
 }
 
+static void ath10k_snoc_quirks_init(struct ath10k *ar)
+{
+	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+	struct device *dev = &ar_snoc->dev->dev;
+
+	if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-8bit-quirk"))
+		set_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags);
+}
+
 int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
 {
 	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
@@ -1678,6 +1687,8 @@ static int ath10k_snoc_probe(struct plat
 	ar->ce_priv = &ar_snoc->ce;
 	msa_size = drv_data->msa_size;
 
+	ath10k_snoc_quirks_init(ar);
+
 	ret = ath10k_snoc_resource_init(ar);
 	if (ret) {
 		ath10k_warn(ar, "failed to initialize resource: %d\n", ret);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/snoc.h linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/snoc.h
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/snoc.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/snoc.h	2019-11-29 04:08:31.000000000 -0500
@@ -63,6 +63,7 @@ enum ath10k_snoc_flags {
 	ATH10K_SNOC_FLAG_REGISTERED,
 	ATH10K_SNOC_FLAG_UNREGISTERING,
 	ATH10K_SNOC_FLAG_RECOVERY,
+	ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK,
 };
 
 struct ath10k_snoc {
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/usb.c linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/usb.c
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath10k/usb.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath10k/usb.c	2019-11-29 04:08:31.000000000 -0500
@@ -38,6 +38,10 @@ ath10k_usb_alloc_urb_from_pipe(struct at
 	struct ath10k_urb_context *urb_context = NULL;
 	unsigned long flags;
 
+	/* bail if this pipe is not initialized */
+	if (!pipe->ar_usb)
+		return NULL;
+
 	spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
 	if (!list_empty(&pipe->urb_list_head)) {
 		urb_context = list_first_entry(&pipe->urb_list_head,
@@ -55,6 +59,10 @@ static void ath10k_usb_free_urb_to_pipe(
 {
 	unsigned long flags;
 
+	/* bail if this pipe is not initialized */
+	if (!pipe->ar_usb)
+		return;
+
 	spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
 
 	pipe->urb_cnt++;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
--- linux-libre-5.3.13-gnu/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c	2019-11-29 04:08:31.000000000 -0500
@@ -4183,7 +4183,7 @@ static void ar9003_hw_thermometer_apply(
 
 static void ar9003_hw_thermo_cal_apply(struct ath_hw *ah)
 {
-	u32 data, ko, kg;
+	u32 data = 0, ko, kg;
 
 	if (!AR_SREV_9462_20_OR_LATER(ah))
 		return;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/nfc/port100.c linux-libre-5.3.14-gnu/drivers/nfc/port100.c
--- linux-libre-5.3.13-gnu/drivers/nfc/port100.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/nfc/port100.c	2019-11-29 04:08:31.000000000 -0500
@@ -783,7 +783,7 @@ static int port100_send_frame_async(stru
 
 	rc = port100_submit_urb_for_ack(dev, GFP_KERNEL);
 	if (rc)
-		usb_unlink_urb(dev->out_urb);
+		usb_kill_urb(dev->out_urb);
 
 exit:
 	mutex_unlock(&dev->out_urb_lock);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/staging/comedi/drivers/usbduxfast.c linux-libre-5.3.14-gnu/drivers/staging/comedi/drivers/usbduxfast.c
--- linux-libre-5.3.13-gnu/drivers/staging/comedi/drivers/usbduxfast.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/staging/comedi/drivers/usbduxfast.c	2019-11-29 04:08:31.000000000 -0500
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2004-2014 Bernd Porr, mail@berndporr.me.uk
+ *  Copyright (C) 2004-2019 Bernd Porr, mail@berndporr.me.uk
  */
 
 /*
@@ -8,7 +8,7 @@
  * Description: University of Stirling USB DAQ & INCITE Technology Limited
  * Devices: [ITL] USB-DUX-FAST (usbduxfast)
  * Author: Bernd Porr <mail@berndporr.me.uk>
- * Updated: 10 Oct 2014
+ * Updated: 16 Nov 2019
  * Status: stable
  */
 
@@ -22,6 +22,7 @@
  *
  *
  * Revision history:
+ * 1.0: Fixed a rounding error in usbduxfast_ai_cmdtest
  * 0.9: Dropping the first data packet which seems to be from the last transfer.
  *      Buffer overflows in the FX2 are handed over to comedi.
  * 0.92: Dropping now 4 packets. The quad buffer has to be emptied.
@@ -350,6 +351,7 @@ static int usbduxfast_ai_cmdtest(struct
 				 struct comedi_cmd *cmd)
 {
 	int err = 0;
+	int err2 = 0;
 	unsigned int steps;
 	unsigned int arg;
 
@@ -399,11 +401,16 @@ static int usbduxfast_ai_cmdtest(struct
 	 */
 	steps = (cmd->convert_arg * 30) / 1000;
 	if (cmd->chanlist_len !=  1)
-		err |= comedi_check_trigger_arg_min(&steps,
-						    MIN_SAMPLING_PERIOD);
-	err |= comedi_check_trigger_arg_max(&steps, MAX_SAMPLING_PERIOD);
-	arg = (steps * 1000) / 30;
-	err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg);
+		err2 |= comedi_check_trigger_arg_min(&steps,
+						     MIN_SAMPLING_PERIOD);
+	else
+		err2 |= comedi_check_trigger_arg_min(&steps, 1);
+	err2 |= comedi_check_trigger_arg_max(&steps, MAX_SAMPLING_PERIOD);
+	if (err2) {
+		err |= err2;
+		arg = (steps * 1000) / 30;
+		err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg);
+	}
 
 	if (cmd->stop_src == TRIG_COUNT)
 		err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/misc/appledisplay.c linux-libre-5.3.14-gnu/drivers/usb/misc/appledisplay.c
--- linux-libre-5.3.13-gnu/drivers/usb/misc/appledisplay.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/misc/appledisplay.c	2019-11-29 04:08:31.000000000 -0500
@@ -164,7 +164,12 @@ static int appledisplay_bl_get_brightnes
 		0,
 		pdata->msgdata, 2,
 		ACD_USB_TIMEOUT);
-	brightness = pdata->msgdata[1];
+	if (retval < 2) {
+		if (retval >= 0)
+			retval = -EMSGSIZE;
+	} else {
+		brightness = pdata->msgdata[1];
+	}
 	mutex_unlock(&pdata->sysfslock);
 
 	if (retval < 0)
@@ -299,6 +304,7 @@ error:
 	if (pdata) {
 		if (pdata->urb) {
 			usb_kill_urb(pdata->urb);
+			cancel_delayed_work_sync(&pdata->work);
 			if (pdata->urbdata)
 				usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
 					pdata->urbdata, pdata->urb->transfer_dma);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/misc/chaoskey.c linux-libre-5.3.14-gnu/drivers/usb/misc/chaoskey.c
--- linux-libre-5.3.13-gnu/drivers/usb/misc/chaoskey.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/misc/chaoskey.c	2019-11-29 04:08:31.000000000 -0500
@@ -384,13 +384,17 @@ static int _chaoskey_fill(struct chaoske
 		!dev->reading,
 		(started ? NAK_TIMEOUT : ALEA_FIRST_TIMEOUT) );
 
-	if (result < 0)
+	if (result < 0) {
+		usb_kill_urb(dev->urb);
 		goto out;
+	}
 
-	if (result == 0)
+	if (result == 0) {
 		result = -ETIMEDOUT;
-	else
+		usb_kill_urb(dev->urb);
+	} else {
 		result = dev->valid;
+	}
 out:
 	/* Let the device go back to sleep eventually */
 	usb_autopm_put_interface(dev->interface);
@@ -526,7 +530,21 @@ static int chaoskey_suspend(struct usb_i
 
 static int chaoskey_resume(struct usb_interface *interface)
 {
+	struct chaoskey *dev;
+	struct usb_device *udev = interface_to_usbdev(interface);
+
 	usb_dbg(interface, "resume");
+	dev = usb_get_intfdata(interface);
+
+	/*
+	 * We may have lost power.
+	 * In that case the device that needs a long time
+	 * for the first requests needs an extended timeout
+	 * again
+	 */
+	if (le16_to_cpu(udev->descriptor.idVendor) == ALEA_VENDOR_ID)
+		dev->reads_started = false;
+
 	return 0;
 }
 #else
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/serial/cp210x.c linux-libre-5.3.14-gnu/drivers/usb/serial/cp210x.c
--- linux-libre-5.3.13-gnu/drivers/usb/serial/cp210x.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/serial/cp210x.c	2019-11-29 04:08:31.000000000 -0500
@@ -125,6 +125,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
 	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/serial/mos7720.c linux-libre-5.3.14-gnu/drivers/usb/serial/mos7720.c
--- linux-libre-5.3.13-gnu/drivers/usb/serial/mos7720.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/serial/mos7720.c	2019-11-29 04:08:31.000000000 -0500
@@ -1833,10 +1833,6 @@ static int mos7720_startup(struct usb_se
 	product = le16_to_cpu(serial->dev->descriptor.idProduct);
 	dev = serial->dev;
 
-	/* setting configuration feature to one */
-	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
-
 	if (product == MOSCHIP_DEVICE_ID_7715) {
 		struct urb *urb = serial->port[0]->interrupt_in_urb;
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/serial/mos7840.c linux-libre-5.3.14-gnu/drivers/usb/serial/mos7840.c
--- linux-libre-5.3.13-gnu/drivers/usb/serial/mos7840.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/serial/mos7840.c	2019-11-29 04:08:31.000000000 -0500
@@ -119,11 +119,15 @@
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840
  * ATEN UC2322 device using Moschip MCS7820
+ * MOXA UPort 2210 device using Moschip MCS7820
  */
 #define USB_VENDOR_ID_ATENINTL		0x0557
 #define ATENINTL_DEVICE_ID_UC2324	0x2011
 #define ATENINTL_DEVICE_ID_UC2322	0x7820
 
+#define USB_VENDOR_ID_MOXA		0x110a
+#define MOXA_DEVICE_ID_2210		0x2210
+
 /* Interrupt Routine Defines    */
 
 #define SERIAL_IIR_RLS      0x06
@@ -195,6 +199,7 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
+	{USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)},
 	{}			/* terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -2020,6 +2025,7 @@ static int mos7840_probe(struct usb_seri
 				const struct usb_device_id *id)
 {
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	u16 vid = le16_to_cpu(serial->dev->descriptor.idVendor);
 	u8 *buf;
 	int device_type;
 
@@ -2030,6 +2036,11 @@ static int mos7840_probe(struct usb_seri
 		goto out;
 	}
 
+	if (vid == USB_VENDOR_ID_MOXA && product == MOXA_DEVICE_ID_2210) {
+		device_type = MOSCHIP_DEVICE_ID_7820;
+		goto out;
+	}
+
 	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -2279,11 +2290,6 @@ out:
 			goto error;
 		} else
 			dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
-
-		/* setting configuration feature to one */
-		usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				0x03, 0x00, 0x01, 0x00, NULL, 0x00,
-				MOS_WDR_TIMEOUT);
 	}
 	return 0;
 error:
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/serial/option.c linux-libre-5.3.14-gnu/drivers/usb/serial/option.c
--- linux-libre-5.3.13-gnu/drivers/usb/serial/option.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/serial/option.c	2019-11-29 04:08:31.000000000 -0500
@@ -197,6 +197,7 @@ static void option_instat_callback(struc
 #define DELL_PRODUCT_5804_MINICARD_ATT		0x819b  /* Novatel E371 */
 
 #define DELL_PRODUCT_5821E			0x81d7
+#define DELL_PRODUCT_5821E_ESIM			0x81e0
 
 #define KYOCERA_VENDOR_ID			0x0c88
 #define KYOCERA_PRODUCT_KPC650			0x17da
@@ -1044,6 +1045,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E),
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM),
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1990,6 +1993,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+	{ USB_DEVICE(0x0489, 0xe0b4),						/* Foxconn T77W968 */
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/usbip/Kconfig linux-libre-5.3.14-gnu/drivers/usb/usbip/Kconfig
--- linux-libre-5.3.13-gnu/drivers/usb/usbip/Kconfig	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/usbip/Kconfig	2019-11-29 04:08:31.000000000 -0500
@@ -4,6 +4,7 @@ config USBIP_CORE
 	tristate "USB/IP support"
 	depends on NET
 	select USB_COMMON
+	select SGL_ALLOC
 	---help---
 	  This enables pushing USB packets over IP to allow remote
 	  machines direct access to USB devices. It provides the
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/usb/usbip/stub_rx.c linux-libre-5.3.14-gnu/drivers/usb/usbip/stub_rx.c
--- linux-libre-5.3.13-gnu/drivers/usb/usbip/stub_rx.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/usb/usbip/stub_rx.c	2019-11-29 04:08:31.000000000 -0500
@@ -470,18 +470,50 @@ static void stub_recv_cmd_submit(struct
 	if (pipe == -1)
 		return;
 
+	/*
+	 * Smatch reported the error case where use_sg is true and buf_len is 0.
+	 * In this case, It adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be
+	 * released by stub event handler and connection will be shut down.
+	 */
 	priv = stub_priv_alloc(sdev, pdu);
 	if (!priv)
 		return;
 
 	buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
 
+	if (use_sg && !buf_len) {
+		dev_err(&udev->dev, "sg buffer with zero length\n");
+		goto err_malloc;
+	}
+
 	/* allocate urb transfer buffer, if needed */
 	if (buf_len) {
 		if (use_sg) {
 			sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
 			if (!sgl)
 				goto err_malloc;
+
+			/* Check if the server's HCD supports SG */
+			if (!udev->bus->sg_tablesize) {
+				/*
+				 * If the server's HCD doesn't support SG, break
+				 * a single SG request into several URBs and map
+				 * each SG list entry to corresponding URB
+				 * buffer. The previously allocated SG list is
+				 * stored in priv->sgl (If the server's HCD
+				 * support SG, SG list is stored only in
+				 * urb->sg) and it is used as an indicator that
+				 * the server split single SG request into
+				 * several URBs. Later, priv->sgl is used by
+				 * stub_complete() and stub_send_ret_submit() to
+				 * reassemble the divied URBs.
+				 */
+				support_sg = 0;
+				num_urbs = nents;
+				priv->completed_urbs = 0;
+				pdu->u.cmd_submit.transfer_flags &=
+								~URB_DMA_MAP_SG;
+			}
 		} else {
 			buffer = kzalloc(buf_len, GFP_KERNEL);
 			if (!buffer)
@@ -489,24 +521,6 @@ static void stub_recv_cmd_submit(struct
 		}
 	}
 
-	/* Check if the server's HCD supports SG */
-	if (use_sg && !udev->bus->sg_tablesize) {
-		/*
-		 * If the server's HCD doesn't support SG, break a single SG
-		 * request into several URBs and map each SG list entry to
-		 * corresponding URB buffer. The previously allocated SG
-		 * list is stored in priv->sgl (If the server's HCD support SG,
-		 * SG list is stored only in urb->sg) and it is used as an
-		 * indicator that the server split single SG request into
-		 * several URBs. Later, priv->sgl is used by stub_complete() and
-		 * stub_send_ret_submit() to reassemble the divied URBs.
-		 */
-		support_sg = 0;
-		num_urbs = nents;
-		priv->completed_urbs = 0;
-		pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
-	}
-
 	/* allocate urb array */
 	priv->num_urbs = num_urbs;
 	priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/vhost/vsock.c linux-libre-5.3.14-gnu/drivers/vhost/vsock.c
--- linux-libre-5.3.13-gnu/drivers/vhost/vsock.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/vhost/vsock.c	2019-11-29 04:08:31.000000000 -0500
@@ -102,7 +102,7 @@ vhost_transport_do_send_pkt(struct vhost
 		struct iov_iter iov_iter;
 		unsigned out, in;
 		size_t nbytes;
-		size_t len;
+		size_t iov_len, payload_len;
 		int head;
 
 		spin_lock_bh(&vsock->send_pkt_list_lock);
@@ -147,8 +147,24 @@ vhost_transport_do_send_pkt(struct vhost
 			break;
 		}
 
-		len = iov_length(&vq->iov[out], in);
-		iov_iter_init(&iov_iter, READ, &vq->iov[out], in, len);
+		iov_len = iov_length(&vq->iov[out], in);
+		if (iov_len < sizeof(pkt->hdr)) {
+			virtio_transport_free_pkt(pkt);
+			vq_err(vq, "Buffer len [%zu] too small\n", iov_len);
+			break;
+		}
+
+		iov_iter_init(&iov_iter, READ, &vq->iov[out], in, iov_len);
+		payload_len = pkt->len - pkt->off;
+
+		/* If the packet is greater than the space available in the
+		 * buffer, we split it using multiple buffers.
+		 */
+		if (payload_len > iov_len - sizeof(pkt->hdr))
+			payload_len = iov_len - sizeof(pkt->hdr);
+
+		/* Set the correct length in the header */
+		pkt->hdr.len = cpu_to_le32(payload_len);
 
 		nbytes = copy_to_iter(&pkt->hdr, sizeof(pkt->hdr), &iov_iter);
 		if (nbytes != sizeof(pkt->hdr)) {
@@ -157,33 +173,47 @@ vhost_transport_do_send_pkt(struct vhost
 			break;
 		}
 
-		nbytes = copy_to_iter(pkt->buf, pkt->len, &iov_iter);
-		if (nbytes != pkt->len) {
+		nbytes = copy_to_iter(pkt->buf + pkt->off, payload_len,
+				      &iov_iter);
+		if (nbytes != payload_len) {
 			virtio_transport_free_pkt(pkt);
 			vq_err(vq, "Faulted on copying pkt buf\n");
 			break;
 		}
 
-		vhost_add_used(vq, head, sizeof(pkt->hdr) + pkt->len);
+		vhost_add_used(vq, head, sizeof(pkt->hdr) + payload_len);
 		added = true;
 
-		if (pkt->reply) {
-			int val;
-
-			val = atomic_dec_return(&vsock->queued_replies);
-
-			/* Do we have resources to resume tx processing? */
-			if (val + 1 == tx_vq->num)
-				restart_tx = true;
-		}
-
 		/* Deliver to monitoring devices all correctly transmitted
 		 * packets.
 		 */
 		virtio_transport_deliver_tap_pkt(pkt);
 
-		total_len += pkt->len;
-		virtio_transport_free_pkt(pkt);
+		pkt->off += payload_len;
+		total_len += payload_len;
+
+		/* If we didn't send all the payload we can requeue the packet
+		 * to send it with the next available buffer.
+		 */
+		if (pkt->off < pkt->len) {
+			spin_lock_bh(&vsock->send_pkt_list_lock);
+			list_add(&pkt->list, &vsock->send_pkt_list);
+			spin_unlock_bh(&vsock->send_pkt_list_lock);
+		} else {
+			if (pkt->reply) {
+				int val;
+
+				val = atomic_dec_return(&vsock->queued_replies);
+
+				/* Do we have resources to resume tx
+				 * processing?
+				 */
+				if (val + 1 == tx_vq->num)
+					restart_tx = true;
+			}
+
+			virtio_transport_free_pkt(pkt);
+		}
 	} while(likely(!vhost_exceeds_weight(vq, ++pkts, total_len)));
 	if (added)
 		vhost_signal(&vsock->dev, vq);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/virtio/virtio_balloon.c linux-libre-5.3.14-gnu/drivers/virtio/virtio_balloon.c
--- linux-libre-5.3.13-gnu/drivers/virtio/virtio_balloon.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/virtio/virtio_balloon.c	2019-11-29 04:08:31.000000000 -0500
@@ -820,7 +820,7 @@ static unsigned long virtio_balloon_shri
 	unsigned long count;
 
 	count = vb->num_pages / VIRTIO_BALLOON_PAGES_PER_PAGE;
-	count += vb->num_free_page_blocks >> VIRTIO_BALLOON_FREE_PAGE_ORDER;
+	count += vb->num_free_page_blocks << VIRTIO_BALLOON_FREE_PAGE_ORDER;
 
 	return count;
 }
diff -druNp --no-dereference linux-libre-5.3.13-gnu/drivers/virtio/virtio_ring.c linux-libre-5.3.14-gnu/drivers/virtio/virtio_ring.c
--- linux-libre-5.3.13-gnu/drivers/virtio/virtio_ring.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/drivers/virtio/virtio_ring.c	2019-11-29 04:08:31.000000000 -0500
@@ -583,7 +583,7 @@ unmap_release:
 		kfree(desc);
 
 	END_USE(vq);
-	return -EIO;
+	return -ENOMEM;
 }
 
 static bool virtqueue_kick_prepare_split(struct virtqueue *_vq)
@@ -1085,7 +1085,7 @@ unmap_release:
 	kfree(desc);
 
 	END_USE(vq);
-	return -EIO;
+	return -ENOMEM;
 }
 
 static inline int virtqueue_add_packed(struct virtqueue *_vq,
diff -druNp --no-dereference linux-libre-5.3.13-gnu/fs/ocfs2/xattr.c linux-libre-5.3.14-gnu/fs/ocfs2/xattr.c
--- linux-libre-5.3.13-gnu/fs/ocfs2/xattr.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/fs/ocfs2/xattr.c	2019-11-29 04:08:31.000000000 -0500
@@ -1490,6 +1490,18 @@ static int ocfs2_xa_check_space(struct o
 	return loc->xl_ops->xlo_check_space(loc, xi);
 }
 
+static void ocfs2_xa_add_entry(struct ocfs2_xa_loc *loc, u32 name_hash)
+{
+	loc->xl_ops->xlo_add_entry(loc, name_hash);
+	loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash);
+	/*
+	 * We can't leave the new entry's xe_name_offset at zero or
+	 * add_namevalue() will go nuts.  We set it to the size of our
+	 * storage so that it can never be less than any other entry.
+	 */
+	loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);
+}
+
 static void ocfs2_xa_add_namevalue(struct ocfs2_xa_loc *loc,
 				   struct ocfs2_xattr_info *xi)
 {
@@ -2121,31 +2133,29 @@ static int ocfs2_xa_prepare_entry(struct
 	if (rc)
 		goto out;
 
-	if (!loc->xl_entry) {
-		rc = -EINVAL;
-		goto out;
-	}
-
-	if (ocfs2_xa_can_reuse_entry(loc, xi)) {
-		orig_value_size = loc->xl_entry->xe_value_size;
-		rc = ocfs2_xa_reuse_entry(loc, xi, ctxt);
-		if (rc)
-			goto out;
-		goto alloc_value;
-	}
+	if (loc->xl_entry) {
+		if (ocfs2_xa_can_reuse_entry(loc, xi)) {
+			orig_value_size = loc->xl_entry->xe_value_size;
+			rc = ocfs2_xa_reuse_entry(loc, xi, ctxt);
+			if (rc)
+				goto out;
+			goto alloc_value;
+		}
 
-	if (!ocfs2_xattr_is_local(loc->xl_entry)) {
-		orig_clusters = ocfs2_xa_value_clusters(loc);
-		rc = ocfs2_xa_value_truncate(loc, 0, ctxt);
-		if (rc) {
-			mlog_errno(rc);
-			ocfs2_xa_cleanup_value_truncate(loc,
-							"overwriting",
-							orig_clusters);
-			goto out;
+		if (!ocfs2_xattr_is_local(loc->xl_entry)) {
+			orig_clusters = ocfs2_xa_value_clusters(loc);
+			rc = ocfs2_xa_value_truncate(loc, 0, ctxt);
+			if (rc) {
+				mlog_errno(rc);
+				ocfs2_xa_cleanup_value_truncate(loc,
+								"overwriting",
+								orig_clusters);
+				goto out;
+			}
 		}
-	}
-	ocfs2_xa_wipe_namevalue(loc);
+		ocfs2_xa_wipe_namevalue(loc);
+	} else
+		ocfs2_xa_add_entry(loc, name_hash);
 
 	/*
 	 * If we get here, we have a blank entry.  Fill it.  We grow our
diff -druNp --no-dereference linux-libre-5.3.13-gnu/include/net/tls.h linux-libre-5.3.14-gnu/include/net/tls.h
--- linux-libre-5.3.13-gnu/include/net/tls.h	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/include/net/tls.h	2019-11-29 04:08:31.000000000 -0500
@@ -364,6 +364,8 @@ int tls_set_sw_offload(struct sock *sk,
 void tls_sw_strparser_arm(struct sock *sk, struct tls_context *ctx);
 void tls_sw_strparser_done(struct tls_context *tls_ctx);
 int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size);
+int tls_sw_sendpage_locked(struct sock *sk, struct page *page,
+			   int offset, size_t size, int flags);
 int tls_sw_sendpage(struct sock *sk, struct page *page,
 		    int offset, size_t size, int flags);
 void tls_sw_cancel_work_tx(struct tls_context *tls_ctx);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/kernel/fork.c linux-libre-5.3.14-gnu/kernel/fork.c
--- linux-libre-5.3.13-gnu/kernel/fork.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/kernel/fork.c	2019-11-29 04:08:31.000000000 -0500
@@ -1713,11 +1713,11 @@ static void pidfd_show_fdinfo(struct seq
 /*
  * Poll support for process exit notification.
  */
-static unsigned int pidfd_poll(struct file *file, struct poll_table_struct *pts)
+static __poll_t pidfd_poll(struct file *file, struct poll_table_struct *pts)
 {
 	struct task_struct *task;
 	struct pid *pid = file->private_data;
-	int poll_flags = 0;
+	__poll_t poll_flags = 0;
 
 	poll_wait(file, &pid->wait_pidfd, pts);
 
@@ -1729,7 +1729,7 @@ static unsigned int pidfd_poll(struct fi
 	 * group, then poll(2) should block, similar to the wait(2) family.
 	 */
 	if (!task || (task->exit_state && thread_group_empty(task)))
-		poll_flags = POLLIN | POLLRDNORM;
+		poll_flags = EPOLLIN | EPOLLRDNORM;
 	rcu_read_unlock();
 
 	return poll_flags;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/kernel/futex.c linux-libre-5.3.14-gnu/kernel/futex.c
--- linux-libre-5.3.13-gnu/kernel/futex.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/kernel/futex.c	2019-11-29 04:08:31.000000000 -0500
@@ -3454,11 +3454,16 @@ err_unlock:
 	return ret;
 }
 
+/* Constants for the pending_op argument of handle_futex_death */
+#define HANDLE_DEATH_PENDING	true
+#define HANDLE_DEATH_LIST	false
+
 /*
  * Process a futex-list entry, check whether it's owned by the
  * dying task, and do notification if so:
  */
-static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi)
+static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr,
+			      bool pi, bool pending_op)
 {
 	u32 uval, uninitialized_var(nval), mval;
 	int err;
@@ -3471,6 +3476,42 @@ retry:
 	if (get_user(uval, uaddr))
 		return -1;
 
+	/*
+	 * Special case for regular (non PI) futexes. The unlock path in
+	 * user space has two race scenarios:
+	 *
+	 * 1. The unlock path releases the user space futex value and
+	 *    before it can execute the futex() syscall to wake up
+	 *    waiters it is killed.
+	 *
+	 * 2. A woken up waiter is killed before it can acquire the
+	 *    futex in user space.
+	 *
+	 * In both cases the TID validation below prevents a wakeup of
+	 * potential waiters which can cause these waiters to block
+	 * forever.
+	 *
+	 * In both cases the following conditions are met:
+	 *
+	 *	1) task->robust_list->list_op_pending != NULL
+	 *	   @pending_op == true
+	 *	2) User space futex value == 0
+	 *	3) Regular futex: @pi == false
+	 *
+	 * If these conditions are met, it is safe to attempt waking up a
+	 * potential waiter without touching the user space futex value and
+	 * trying to set the OWNER_DIED bit. The user space futex value is
+	 * uncontended and the rest of the user space mutex state is
+	 * consistent, so a woken waiter will just take over the
+	 * uncontended futex. Setting the OWNER_DIED bit would create
+	 * inconsistent state and malfunction of the user space owner died
+	 * handling.
+	 */
+	if (pending_op && !pi && !uval) {
+		futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY);
+		return 0;
+	}
+
 	if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr))
 		return 0;
 
@@ -3590,10 +3631,11 @@ void exit_robust_list(struct task_struct
 		 * A pending lock might already be on the list, so
 		 * don't process it twice:
 		 */
-		if (entry != pending)
+		if (entry != pending) {
 			if (handle_futex_death((void __user *)entry + futex_offset,
-						curr, pi))
+						curr, pi, HANDLE_DEATH_LIST))
 				return;
+		}
 		if (rc)
 			return;
 		entry = next_entry;
@@ -3607,9 +3649,10 @@ void exit_robust_list(struct task_struct
 		cond_resched();
 	}
 
-	if (pending)
+	if (pending) {
 		handle_futex_death((void __user *)pending + futex_offset,
-				   curr, pip);
+				   curr, pip, HANDLE_DEATH_PENDING);
+	}
 }
 
 long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
@@ -3786,7 +3829,8 @@ void compat_exit_robust_list(struct task
 		if (entry != pending) {
 			void __user *uaddr = futex_uaddr(entry, futex_offset);
 
-			if (handle_futex_death(uaddr, curr, pi))
+			if (handle_futex_death(uaddr, curr, pi,
+					       HANDLE_DEATH_LIST))
 				return;
 		}
 		if (rc)
@@ -3805,7 +3849,7 @@ void compat_exit_robust_list(struct task
 	if (pending) {
 		void __user *uaddr = futex_uaddr(pending, futex_offset);
 
-		handle_futex_death(uaddr, curr, pip);
+		handle_futex_death(uaddr, curr, pip, HANDLE_DEATH_PENDING);
 	}
 }
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/Makefile linux-libre-5.3.14-gnu/Makefile
--- linux-libre-5.3.13-gnu/Makefile	2019-11-24 03:28:39.000000000 -0500
+++ linux-libre-5.3.14-gnu/Makefile	2019-11-29 07:31:27.000000000 -0500
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 3
-SUBLEVEL = 13
+SUBLEVEL = 14
 EXTRAVERSION = -gnu
 NAME = Bobtail Squid
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/mm/ksm.c linux-libre-5.3.14-gnu/mm/ksm.c
--- linux-libre-5.3.13-gnu/mm/ksm.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/mm/ksm.c	2019-11-29 04:08:31.000000000 -0500
@@ -885,13 +885,13 @@ static int remove_stable_node(struct sta
 		return 0;
 	}
 
-	if (WARN_ON_ONCE(page_mapped(page))) {
-		/*
-		 * This should not happen: but if it does, just refuse to let
-		 * merge_across_nodes be switched - there is no need to panic.
-		 */
-		err = -EBUSY;
-	} else {
+	/*
+	 * Page could be still mapped if this races with __mmput() running in
+	 * between ksm_exit() and exit_mmap(). Just refuse to let
+	 * merge_across_nodes/max_page_sharing be switched.
+	 */
+	err = -EBUSY;
+	if (!page_mapped(page)) {
 		/*
 		 * The stable node did not yet appear stale to get_ksm_page(),
 		 * since that allows for an unmapped ksm page to be recognized
diff -druNp --no-dereference linux-libre-5.3.13-gnu/mm/memory_hotplug.c linux-libre-5.3.14-gnu/mm/memory_hotplug.c
--- linux-libre-5.3.13-gnu/mm/memory_hotplug.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/mm/memory_hotplug.c	2019-11-29 04:08:31.000000000 -0500
@@ -331,7 +331,7 @@ static unsigned long find_smallest_secti
 				     unsigned long end_pfn)
 {
 	for (; start_pfn < end_pfn; start_pfn += PAGES_PER_SUBSECTION) {
-		if (unlikely(!pfn_valid(start_pfn)))
+		if (unlikely(!pfn_to_online_page(start_pfn)))
 			continue;
 
 		if (unlikely(pfn_to_nid(start_pfn) != nid))
@@ -356,7 +356,7 @@ static unsigned long find_biggest_sectio
 	/* pfn is the end pfn of a memory section. */
 	pfn = end_pfn - 1;
 	for (; pfn >= start_pfn; pfn -= PAGES_PER_SUBSECTION) {
-		if (unlikely(!pfn_valid(pfn)))
+		if (unlikely(!pfn_to_online_page(pfn)))
 			continue;
 
 		if (unlikely(pfn_to_nid(pfn) != nid))
@@ -415,7 +415,7 @@ static void shrink_zone_span(struct zone
 	 */
 	pfn = zone_start_pfn;
 	for (; pfn < zone_end_pfn; pfn += PAGES_PER_SUBSECTION) {
-		if (unlikely(!pfn_valid(pfn)))
+		if (unlikely(!pfn_to_online_page(pfn)))
 			continue;
 
 		if (page_zone(pfn_to_page(pfn)) != zone)
@@ -471,6 +471,16 @@ static void __remove_zone(struct zone *z
 	struct pglist_data *pgdat = zone->zone_pgdat;
 	unsigned long flags;
 
+#ifdef CONFIG_ZONE_DEVICE
+	/*
+	 * Zone shrinking code cannot properly deal with ZONE_DEVICE. So
+	 * we will not try to shrink the zones - which is okay as
+	 * set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
+	 */
+	if (zone_idx(zone) == ZONE_DEVICE)
+		return;
+#endif
+
 	pgdat_resize_lock(zone->zone_pgdat, &flags);
 	shrink_zone_span(zone, start_pfn, start_pfn + nr_pages);
 	update_pgdat_span(pgdat);
diff -druNp --no-dereference linux-libre-5.3.13-gnu/mm/slub.c linux-libre-5.3.14-gnu/mm/slub.c
--- linux-libre-5.3.13-gnu/mm/slub.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/mm/slub.c	2019-11-29 04:08:31.000000000 -0500
@@ -2649,6 +2649,17 @@ static void *__slab_alloc(struct kmem_ca
 }
 
 /*
+ * If the object has been wiped upon free, make sure it's fully initialized by
+ * zeroing out freelist pointer.
+ */
+static __always_inline void maybe_wipe_obj_freeptr(struct kmem_cache *s,
+						   void *obj)
+{
+	if (unlikely(slab_want_init_on_free(s)) && obj)
+		memset((void *)((char *)obj + s->offset), 0, sizeof(void *));
+}
+
+/*
  * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
  * have the fastpath folded into their functions. So no function call
  * overhead for requests that can be satisfied on the fastpath.
@@ -2736,12 +2747,8 @@ redo:
 		prefetch_freepointer(s, next_object);
 		stat(s, ALLOC_FASTPATH);
 	}
-	/*
-	 * If the object has been wiped upon free, make sure it's fully
-	 * initialized by zeroing out freelist pointer.
-	 */
-	if (unlikely(slab_want_init_on_free(s)) && object)
-		memset(object + s->offset, 0, sizeof(void *));
+
+	maybe_wipe_obj_freeptr(s, object);
 
 	if (unlikely(slab_want_init_on_alloc(gfpflags, s)) && object)
 		memset(object, 0, s->object_size);
@@ -3155,10 +3162,13 @@ int kmem_cache_alloc_bulk(struct kmem_ca
 				goto error;
 
 			c = this_cpu_ptr(s->cpu_slab);
+			maybe_wipe_obj_freeptr(s, p[i]);
+
 			continue; /* goto for-loop */
 		}
 		c->freelist = get_freepointer(s, object);
 		p[i] = object;
+		maybe_wipe_obj_freeptr(s, p[i]);
 	}
 	c->tid = next_tid(c->tid);
 	local_irq_enable();
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/core/rtnetlink.c linux-libre-5.3.14-gnu/net/core/rtnetlink.c
--- linux-libre-5.3.13-gnu/net/core/rtnetlink.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/core/rtnetlink.c	2019-11-29 04:08:31.000000000 -0500
@@ -2195,6 +2195,8 @@ static int do_setvfinfo(struct net_devic
 	if (tb[IFLA_VF_MAC]) {
 		struct ifla_vf_mac *ivm = nla_data(tb[IFLA_VF_MAC]);
 
+		if (ivm->vf >= INT_MAX)
+			return -EINVAL;
 		err = -EOPNOTSUPP;
 		if (ops->ndo_set_vf_mac)
 			err = ops->ndo_set_vf_mac(dev, ivm->vf,
@@ -2206,6 +2208,8 @@ static int do_setvfinfo(struct net_devic
 	if (tb[IFLA_VF_VLAN]) {
 		struct ifla_vf_vlan *ivv = nla_data(tb[IFLA_VF_VLAN]);
 
+		if (ivv->vf >= INT_MAX)
+			return -EINVAL;
 		err = -EOPNOTSUPP;
 		if (ops->ndo_set_vf_vlan)
 			err = ops->ndo_set_vf_vlan(dev, ivv->vf, ivv->vlan,
@@ -2238,6 +2242,8 @@ static int do_setvfinfo(struct net_devic
 		if (len == 0)
 			return -EINVAL;
 
+		if (ivvl[0]->vf >= INT_MAX)
+			return -EINVAL;
 		err = ops->ndo_set_vf_vlan(dev, ivvl[0]->vf, ivvl[0]->vlan,
 					   ivvl[0]->qos, ivvl[0]->vlan_proto);
 		if (err < 0)
@@ -2248,6 +2254,8 @@ static int do_setvfinfo(struct net_devic
 		struct ifla_vf_tx_rate *ivt = nla_data(tb[IFLA_VF_TX_RATE]);
 		struct ifla_vf_info ivf;
 
+		if (ivt->vf >= INT_MAX)
+			return -EINVAL;
 		err = -EOPNOTSUPP;
 		if (ops->ndo_get_vf_config)
 			err = ops->ndo_get_vf_config(dev, ivt->vf, &ivf);
@@ -2266,6 +2274,8 @@ static int do_setvfinfo(struct net_devic
 	if (tb[IFLA_VF_RATE]) {
 		struct ifla_vf_rate *ivt = nla_data(tb[IFLA_VF_RATE]);
 
+		if (ivt->vf >= INT_MAX)
+			return -EINVAL;
 		err = -EOPNOTSUPP;
 		if (ops->ndo_set_vf_rate)
 			err = ops->ndo_set_vf_rate(dev, ivt->vf,
@@ -2278,6 +2288,8 @@ static int do_setvfinfo(struct net_devic
 	if (tb[IFLA_VF_SPOOFCHK]) {
 		struct ifla_vf_spoofchk *ivs = nla_data(tb[IFLA_VF_SPOOFCHK]);
 
+		if (ivs->vf >= INT_MAX)
+			return -EINVAL;
 		err = -EOPNOTSUPP;
 		if (ops->ndo_set_vf_spoofchk)
 			err = ops->ndo_set_vf_spoofchk(dev, ivs->vf,
@@ -2289,6 +2301,8 @@ static int do_setvfinfo(struct net_devic
 	if (tb[IFLA_VF_LINK_STATE]) {
 		struct ifla_vf_link_state *ivl = nla_data(tb[IFLA_VF_LINK_STATE]);
 
+		if (ivl->vf >= INT_MAX)
+			return -EINVAL;
 		err = -EOPNOTSUPP;
 		if (ops->ndo_set_vf_link_state)
 			err = ops->ndo_set_vf_link_state(dev, ivl->vf,
@@ -2302,6 +2316,8 @@ static int do_setvfinfo(struct net_devic
 
 		err = -EOPNOTSUPP;
 		ivrssq_en = nla_data(tb[IFLA_VF_RSS_QUERY_EN]);
+		if (ivrssq_en->vf >= INT_MAX)
+			return -EINVAL;
 		if (ops->ndo_set_vf_rss_query_en)
 			err = ops->ndo_set_vf_rss_query_en(dev, ivrssq_en->vf,
 							   ivrssq_en->setting);
@@ -2312,6 +2328,8 @@ static int do_setvfinfo(struct net_devic
 	if (tb[IFLA_VF_TRUST]) {
 		struct ifla_vf_trust *ivt = nla_data(tb[IFLA_VF_TRUST]);
 
+		if (ivt->vf >= INT_MAX)
+			return -EINVAL;
 		err = -EOPNOTSUPP;
 		if (ops->ndo_set_vf_trust)
 			err = ops->ndo_set_vf_trust(dev, ivt->vf, ivt->setting);
@@ -2322,15 +2340,18 @@ static int do_setvfinfo(struct net_devic
 	if (tb[IFLA_VF_IB_NODE_GUID]) {
 		struct ifla_vf_guid *ivt = nla_data(tb[IFLA_VF_IB_NODE_GUID]);
 
+		if (ivt->vf >= INT_MAX)
+			return -EINVAL;
 		if (!ops->ndo_set_vf_guid)
 			return -EOPNOTSUPP;
-
 		return handle_vf_guid(dev, ivt, IFLA_VF_IB_NODE_GUID);
 	}
 
 	if (tb[IFLA_VF_IB_PORT_GUID]) {
 		struct ifla_vf_guid *ivt = nla_data(tb[IFLA_VF_IB_PORT_GUID]);
 
+		if (ivt->vf >= INT_MAX)
+			return -EINVAL;
 		if (!ops->ndo_set_vf_guid)
 			return -EOPNOTSUPP;
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/ipv4/sysctl_net_ipv4.c linux-libre-5.3.14-gnu/net/ipv4/sysctl_net_ipv4.c
--- linux-libre-5.3.13-gnu/net/ipv4/sysctl_net_ipv4.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/ipv4/sysctl_net_ipv4.c	2019-11-29 04:08:31.000000000 -0500
@@ -1028,7 +1028,7 @@ static struct ctl_table ipv4_net_table[]
 		.mode		= 0644,
 		.proc_handler	= proc_fib_multipath_hash_policy,
 		.extra1		= SYSCTL_ZERO,
-		.extra2		= SYSCTL_ONE,
+		.extra2		= &two,
 	},
 #endif
 	{
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/ipv6/route.c linux-libre-5.3.14-gnu/net/ipv6/route.c
--- linux-libre-5.3.13-gnu/net/ipv6/route.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/ipv6/route.c	2019-11-29 04:08:31.000000000 -0500
@@ -634,7 +634,7 @@ static void rt6_probe(struct fib6_nh *fi
 	 * Router Reachability Probe MUST be rate-limited
 	 * to no more than one per minute.
 	 */
-	if (fib6_nh->fib_nh_gw_family)
+	if (!fib6_nh->fib_nh_gw_family)
 		return;
 
 	nh_gw = &fib6_nh->fib_nh_gw6;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/sched/act_pedit.c linux-libre-5.3.14-gnu/net/sched/act_pedit.c
--- linux-libre-5.3.13-gnu/net/sched/act_pedit.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/sched/act_pedit.c	2019-11-29 04:08:31.000000000 -0500
@@ -43,7 +43,7 @@ static struct tcf_pedit_key_ex *tcf_pedi
 	int err = -EINVAL;
 	int rem;
 
-	if (!nla || !n)
+	if (!nla)
 		return NULL;
 
 	keys_ex = kcalloc(n, sizeof(*k), GFP_KERNEL);
@@ -170,6 +170,10 @@ static int tcf_pedit_init(struct net *ne
 	}
 
 	parm = nla_data(pattr);
+	if (!parm->nkeys) {
+		NL_SET_ERR_MSG_MOD(extack, "Pedit requires keys to be passed");
+		return -EINVAL;
+	}
 	ksize = parm->nkeys * sizeof(struct tc_pedit_key);
 	if (nla_len(pattr) < sizeof(*parm) + ksize) {
 		NL_SET_ERR_MSG_ATTR(extack, pattr, "Length of TCA_PEDIT_PARMS or TCA_PEDIT_PARMS_EX pedit attribute is invalid");
@@ -183,12 +187,6 @@ static int tcf_pedit_init(struct net *ne
 	index = parm->index;
 	err = tcf_idr_check_alloc(tn, &index, a, bind);
 	if (!err) {
-		if (!parm->nkeys) {
-			tcf_idr_cleanup(tn, index);
-			NL_SET_ERR_MSG_MOD(extack, "Pedit requires keys to be passed");
-			ret = -EINVAL;
-			goto out_free;
-		}
 		ret = tcf_idr_create(tn, index, est, a,
 				     &act_pedit_ops, bind, false);
 		if (ret) {
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/sched/act_tunnel_key.c linux-libre-5.3.14-gnu/net/sched/act_tunnel_key.c
--- linux-libre-5.3.13-gnu/net/sched/act_tunnel_key.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/sched/act_tunnel_key.c	2019-11-29 04:08:31.000000000 -0500
@@ -135,6 +135,10 @@ static int tunnel_key_copy_opts(const st
 			if (opt_len < 0)
 				return opt_len;
 			opts_len += opt_len;
+			if (opts_len > IP_TUNNEL_OPTS_MAX) {
+				NL_SET_ERR_MSG(extack, "Tunnel options exceeds max size");
+				return -EINVAL;
+			}
 			if (dst) {
 				dst_len -= opt_len;
 				dst += opt_len;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/sched/sch_taprio.c linux-libre-5.3.14-gnu/net/sched/sch_taprio.c
--- linux-libre-5.3.13-gnu/net/sched/sch_taprio.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/sched/sch_taprio.c	2019-11-29 04:08:31.000000000 -0500
@@ -842,7 +842,7 @@ static int taprio_parse_mqprio_opt(struc
 	}
 
 	/* Verify priority mapping uses valid tcs */
-	for (i = 0; i < TC_BITMASK + 1; i++) {
+	for (i = 0; i <= TC_BITMASK; i++) {
 		if (qopt->prio_tc_map[i] >= qopt->num_tc) {
 			NL_SET_ERR_MSG(extack, "Invalid traffic class in priority to traffic class mapping");
 			return -EINVAL;
@@ -1014,6 +1014,26 @@ static void setup_txtime(struct taprio_s
 	}
 }
 
+static int taprio_mqprio_cmp(const struct net_device *dev,
+			     const struct tc_mqprio_qopt *mqprio)
+{
+	int i;
+
+	if (!mqprio || mqprio->num_tc != dev->num_tc)
+		return -1;
+
+	for (i = 0; i < mqprio->num_tc; i++)
+		if (dev->tc_to_txq[i].count != mqprio->count[i] ||
+		    dev->tc_to_txq[i].offset != mqprio->offset[i])
+			return -1;
+
+	for (i = 0; i <= TC_BITMASK; i++)
+		if (dev->prio_tc_map[i] != mqprio->prio_tc_map[i])
+			return -1;
+
+	return 0;
+}
+
 static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
 			 struct netlink_ext_ack *extack)
 {
@@ -1065,6 +1085,10 @@ static int taprio_change(struct Qdisc *s
 	admin = rcu_dereference(q->admin_sched);
 	rcu_read_unlock();
 
+	/* no changes - no new mqprio settings */
+	if (!taprio_mqprio_cmp(dev, mqprio))
+		mqprio = NULL;
+
 	if (mqprio && (oper || admin)) {
 		NL_SET_ERR_MSG(extack, "Changing the traffic mapping of a running schedule is not supported");
 		err = -ENOTSUPP;
@@ -1132,7 +1156,7 @@ static int taprio_change(struct Qdisc *s
 					    mqprio->offset[i]);
 
 		/* Always use supplied priority mappings */
-		for (i = 0; i < TC_BITMASK + 1; i++)
+		for (i = 0; i <= TC_BITMASK; i++)
 			netdev_set_prio_tc_map(dev, i,
 					       mqprio->prio_tc_map[i]);
 	}
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/tls/tls_main.c linux-libre-5.3.14-gnu/net/tls/tls_main.c
--- linux-libre-5.3.13-gnu/net/tls/tls_main.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/tls/tls_main.c	2019-11-29 04:08:31.000000000 -0500
@@ -852,6 +852,7 @@ static int __init tls_register(void)
 {
 	tls_sw_proto_ops = inet_stream_ops;
 	tls_sw_proto_ops.splice_read = tls_sw_splice_read;
+	tls_sw_proto_ops.sendpage_locked   = tls_sw_sendpage_locked,
 
 #ifdef CONFIG_TLS_DEVICE
 	tls_device_init();
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/tls/tls_sw.c linux-libre-5.3.14-gnu/net/tls/tls_sw.c
--- linux-libre-5.3.13-gnu/net/tls/tls_sw.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/tls/tls_sw.c	2019-11-29 04:08:31.000000000 -0500
@@ -1204,6 +1204,17 @@ sendpage_end:
 	return copied ? copied : ret;
 }
 
+int tls_sw_sendpage_locked(struct sock *sk, struct page *page,
+			   int offset, size_t size, int flags)
+{
+	if (flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL |
+		      MSG_SENDPAGE_NOTLAST | MSG_SENDPAGE_NOPOLICY |
+		      MSG_NO_SHARED_FRAGS))
+		return -ENOTSUPP;
+
+	return tls_sw_do_sendpage(sk, page, offset, size, flags);
+}
+
 int tls_sw_sendpage(struct sock *sk, struct page *page,
 		    int offset, size_t size, int flags)
 {
diff -druNp --no-dereference linux-libre-5.3.13-gnu/net/vmw_vsock/virtio_transport_common.c linux-libre-5.3.14-gnu/net/vmw_vsock/virtio_transport_common.c
--- linux-libre-5.3.13-gnu/net/vmw_vsock/virtio_transport_common.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/net/vmw_vsock/virtio_transport_common.c	2019-11-29 04:08:31.000000000 -0500
@@ -91,8 +91,17 @@ static struct sk_buff *virtio_transport_
 	struct virtio_vsock_pkt *pkt = opaque;
 	struct af_vsockmon_hdr *hdr;
 	struct sk_buff *skb;
+	size_t payload_len;
+	void *payload_buf;
 
-	skb = alloc_skb(sizeof(*hdr) + sizeof(pkt->hdr) + pkt->len,
+	/* A packet could be split to fit the RX buffer, so we can retrieve
+	 * the payload length from the header and the buffer pointer taking
+	 * care of the offset in the original packet.
+	 */
+	payload_len = le32_to_cpu(pkt->hdr.len);
+	payload_buf = pkt->buf + pkt->off;
+
+	skb = alloc_skb(sizeof(*hdr) + sizeof(pkt->hdr) + payload_len,
 			GFP_ATOMIC);
 	if (!skb)
 		return NULL;
@@ -132,8 +141,8 @@ static struct sk_buff *virtio_transport_
 
 	skb_put_data(skb, &pkt->hdr, sizeof(pkt->hdr));
 
-	if (pkt->len) {
-		skb_put_data(skb, pkt->buf, pkt->len);
+	if (payload_len) {
+		skb_put_data(skb, payload_buf, payload_len);
 	}
 
 	return skb;
diff -druNp --no-dereference linux-libre-5.3.13-gnu/sound/usb/mixer.c linux-libre-5.3.14-gnu/sound/usb/mixer.c
--- linux-libre-5.3.13-gnu/sound/usb/mixer.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/sound/usb/mixer.c	2019-11-29 04:08:31.000000000 -0500
@@ -2930,6 +2930,9 @@ static int snd_usb_mixer_controls_badd(s
 			continue;
 
 		iface = usb_ifnum_to_if(dev, intf);
+		if (!iface)
+			continue;
+
 		num = iface->num_altsetting;
 
 		if (num < 2)
diff -druNp --no-dereference linux-libre-5.3.13-gnu/tools/gpio/Build linux-libre-5.3.14-gnu/tools/gpio/Build
--- linux-libre-5.3.13-gnu/tools/gpio/Build	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/tools/gpio/Build	2019-11-29 04:08:31.000000000 -0500
@@ -1,3 +1,4 @@
+gpio-utils-y += gpio-utils.o
 lsgpio-y += lsgpio.o gpio-utils.o
 gpio-hammer-y += gpio-hammer.o gpio-utils.o
 gpio-event-mon-y += gpio-event-mon.o gpio-utils.o
diff -druNp --no-dereference linux-libre-5.3.13-gnu/tools/gpio/Makefile linux-libre-5.3.14-gnu/tools/gpio/Makefile
--- linux-libre-5.3.13-gnu/tools/gpio/Makefile	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/tools/gpio/Makefile	2019-11-29 04:08:31.000000000 -0500
@@ -35,11 +35,15 @@ $(OUTPUT)include/linux/gpio.h: ../../inc
 
 prepare: $(OUTPUT)include/linux/gpio.h
 
+GPIO_UTILS_IN := $(output)gpio-utils-in.o
+$(GPIO_UTILS_IN): prepare FORCE
+	$(Q)$(MAKE) $(build)=gpio-utils
+
 #
 # lsgpio
 #
 LSGPIO_IN := $(OUTPUT)lsgpio-in.o
-$(LSGPIO_IN): prepare FORCE
+$(LSGPIO_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
 	$(Q)$(MAKE) $(build)=lsgpio
 $(OUTPUT)lsgpio: $(LSGPIO_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
@@ -48,7 +52,7 @@ $(OUTPUT)lsgpio: $(LSGPIO_IN)
 # gpio-hammer
 #
 GPIO_HAMMER_IN := $(OUTPUT)gpio-hammer-in.o
-$(GPIO_HAMMER_IN): prepare FORCE
+$(GPIO_HAMMER_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
 	$(Q)$(MAKE) $(build)=gpio-hammer
 $(OUTPUT)gpio-hammer: $(GPIO_HAMMER_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
@@ -57,7 +61,7 @@ $(OUTPUT)gpio-hammer: $(GPIO_HAMMER_IN)
 # gpio-event-mon
 #
 GPIO_EVENT_MON_IN := $(OUTPUT)gpio-event-mon-in.o
-$(GPIO_EVENT_MON_IN): prepare FORCE
+$(GPIO_EVENT_MON_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
 	$(Q)$(MAKE) $(build)=gpio-event-mon
 $(OUTPUT)gpio-event-mon: $(GPIO_EVENT_MON_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
diff -druNp --no-dereference linux-libre-5.3.13-gnu/tools/objtool/arch/x86/tools/gen-insn-attr-x86.awk linux-libre-5.3.14-gnu/tools/objtool/arch/x86/tools/gen-insn-attr-x86.awk
--- linux-libre-5.3.13-gnu/tools/objtool/arch/x86/tools/gen-insn-attr-x86.awk	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/tools/objtool/arch/x86/tools/gen-insn-attr-x86.awk	2019-11-29 04:08:31.000000000 -0500
@@ -69,7 +69,7 @@ BEGIN {
 
 	lprefix1_expr = "\\((66|!F3)\\)"
 	lprefix2_expr = "\\(F3\\)"
-	lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)"
+	lprefix3_expr = "\\((F2|!F3|66&F2)\\)"
 	lprefix_expr = "\\((66|F2|F3)\\)"
 	max_lprefix = 4
 
@@ -257,7 +257,7 @@ function convert_operands(count,opnd,
 	return add_flags(imm, mod)
 }
 
-/^[0-9a-f]+\:/ {
+/^[0-9a-f]+:/ {
 	if (NR == 1)
 		next
 	# get index
diff -druNp --no-dereference linux-libre-5.3.13-gnu/tools/testing/selftests/x86/mov_ss_trap.c linux-libre-5.3.14-gnu/tools/testing/selftests/x86/mov_ss_trap.c
--- linux-libre-5.3.13-gnu/tools/testing/selftests/x86/mov_ss_trap.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/tools/testing/selftests/x86/mov_ss_trap.c	2019-11-29 04:08:31.000000000 -0500
@@ -257,7 +257,8 @@ int main()
 			err(1, "sigaltstack");
 		sethandler(SIGSEGV, handle_and_longjmp, SA_RESETHAND | SA_ONSTACK);
 		nr = SYS_getpid;
-		asm volatile ("mov %[ss], %%ss; SYSENTER" : "+a" (nr)
+		/* Clear EBP first to make sure we segfault cleanly. */
+		asm volatile ("xorl %%ebp, %%ebp; mov %[ss], %%ss; SYSENTER" : "+a" (nr)
 			      : [ss] "m" (ss) : "flags", "rcx"
 #ifdef __x86_64__
 				, "r11"
diff -druNp --no-dereference linux-libre-5.3.13-gnu/tools/testing/selftests/x86/sigreturn.c linux-libre-5.3.14-gnu/tools/testing/selftests/x86/sigreturn.c
--- linux-libre-5.3.13-gnu/tools/testing/selftests/x86/sigreturn.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/tools/testing/selftests/x86/sigreturn.c	2019-11-29 04:08:31.000000000 -0500
@@ -451,6 +451,19 @@ static void sigusr1(int sig, siginfo_t *
 	ctx->uc_mcontext.gregs[REG_SP] = (unsigned long)0x8badf00d5aadc0deULL;
 	ctx->uc_mcontext.gregs[REG_CX] = 0;
 
+#ifdef __i386__
+	/*
+	 * Make sure the kernel doesn't inadvertently use DS or ES-relative
+	 * accesses in a region where user DS or ES is loaded.
+	 *
+	 * Skip this for 64-bit builds because long mode doesn't care about
+	 * DS and ES and skipping it increases test coverage a little bit,
+	 * since 64-bit kernels can still run the 32-bit build.
+	 */
+	ctx->uc_mcontext.gregs[REG_DS] = 0;
+	ctx->uc_mcontext.gregs[REG_ES] = 0;
+#endif
+
 	memcpy(&requested_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
 	requested_regs[REG_CX] = *ssptr(ctx);	/* The asm code does this. */
 
diff -druNp --no-dereference linux-libre-5.3.13-gnu/tools/usb/usbip/libsrc/usbip_host_common.c linux-libre-5.3.14-gnu/tools/usb/usbip/libsrc/usbip_host_common.c
--- linux-libre-5.3.13-gnu/tools/usb/usbip/libsrc/usbip_host_common.c	2019-11-24 02:17:01.000000000 -0500
+++ linux-libre-5.3.14-gnu/tools/usb/usbip/libsrc/usbip_host_common.c	2019-11-29 04:08:31.000000000 -0500
@@ -57,7 +57,7 @@ static int32_t read_attr_usbip_status(st
 	}
 
 	value = atoi(status);
-
+	close(fd);
 	return value;
 }
 
