diff -druNp --no-dereference linux-libre-5.6.1-gnu/drivers/platform/x86/pmc_atom.c linux-libre-5.6.2-gnu/drivers/platform/x86/pmc_atom.c
--- linux-libre-5.6.1-gnu/drivers/platform/x86/pmc_atom.c	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/drivers/platform/x86/pmc_atom.c	2020-04-02 02:02:32.000000000 -0400
@@ -385,6 +385,14 @@ static const struct dmi_system_id critcl
 	},
 	{
 		/* pmc_plt_clk* - are used for ethernet controllers */
+		.ident = "Lex 2I385SW",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "2I385SW"),
+		},
+	},
+	{
+		/* pmc_plt_clk* - are used for ethernet controllers */
 		.ident = "Beckhoff CB3163",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
diff -druNp --no-dereference linux-libre-5.6.1-gnu/drivers/tty/serial/sprd_serial.c linux-libre-5.6.2-gnu/drivers/tty/serial/sprd_serial.c
--- linux-libre-5.6.1-gnu/drivers/tty/serial/sprd_serial.c	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/drivers/tty/serial/sprd_serial.c	2020-04-02 02:02:32.000000000 -0400
@@ -1132,14 +1132,13 @@ static int sprd_remove(struct platform_d
 	if (sup) {
 		uart_remove_one_port(&sprd_uart_driver, &sup->port);
 		sprd_port[sup->port.line] = NULL;
+		sprd_rx_free_buf(sup);
 		sprd_ports_num--;
 	}
 
 	if (!sprd_ports_num)
 		uart_unregister_driver(&sprd_uart_driver);
 
-	sprd_rx_free_buf(sup);
-
 	return 0;
 }
 
diff -druNp --no-dereference linux-libre-5.6.1-gnu/drivers/tty/vt/selection.c linux-libre-5.6.2-gnu/drivers/tty/vt/selection.c
--- linux-libre-5.6.1-gnu/drivers/tty/vt/selection.c	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/drivers/tty/vt/selection.c	2020-04-02 02:02:32.000000000 -0400
@@ -88,6 +88,11 @@ void clear_selection(void)
 }
 EXPORT_SYMBOL_GPL(clear_selection);
 
+bool vc_is_sel(struct vc_data *vc)
+{
+	return vc == sel_cons;
+}
+
 /*
  * User settable table: what characters are to be considered alphabetic?
  * 128 bits. Locked by the console lock.
diff -druNp --no-dereference linux-libre-5.6.1-gnu/drivers/tty/vt/vt.c linux-libre-5.6.2-gnu/drivers/tty/vt/vt.c
--- linux-libre-5.6.1-gnu/drivers/tty/vt/vt.c	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/drivers/tty/vt/vt.c	2020-04-02 02:02:32.000000000 -0400
@@ -890,8 +890,9 @@ static void hide_softcursor(struct vc_da
 
 static void hide_cursor(struct vc_data *vc)
 {
-	if (vc == sel_cons)
+	if (vc_is_sel(vc))
 		clear_selection();
+
 	vc->vc_sw->con_cursor(vc, CM_ERASE);
 	hide_softcursor(vc);
 }
@@ -901,7 +902,7 @@ static void set_cursor(struct vc_data *v
 	if (!con_is_fg(vc) || console_blanked || vc->vc_mode == KD_GRAPHICS)
 		return;
 	if (vc->vc_deccm) {
-		if (vc == sel_cons)
+		if (vc_is_sel(vc))
 			clear_selection();
 		add_softcursor(vc);
 		if ((vc->vc_cursor_type & 0x0f) != 1)
@@ -1074,6 +1075,17 @@ static void visual_deinit(struct vc_data
 	module_put(vc->vc_sw->owner);
 }
 
+static void vc_port_destruct(struct tty_port *port)
+{
+	struct vc_data *vc = container_of(port, struct vc_data, port);
+
+	kfree(vc);
+}
+
+static const struct tty_port_operations vc_port_ops = {
+	.destruct = vc_port_destruct,
+};
+
 int vc_allocate(unsigned int currcons)	/* return 0 on success */
 {
 	struct vt_notifier_param param;
@@ -1099,6 +1111,7 @@ int vc_allocate(unsigned int currcons)	/
 
 	vc_cons[currcons].d = vc;
 	tty_port_init(&vc->port);
+	vc->port.ops = &vc_port_ops;
 	INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
 
 	visual_init(vc, currcons, 1);
@@ -1207,7 +1220,7 @@ static int vc_do_resize(struct tty_struc
 		}
 	}
 
-	if (vc == sel_cons)
+	if (vc_is_sel(vc))
 		clear_selection();
 
 	old_rows = vc->vc_rows;
@@ -3253,6 +3266,7 @@ static int con_install(struct tty_driver
 
 	tty->driver_data = vc;
 	vc->port.tty = tty;
+	tty_port_get(&vc->port);
 
 	if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
 		tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
@@ -3288,6 +3302,13 @@ static void con_shutdown(struct tty_stru
 	console_unlock();
 }
 
+static void con_cleanup(struct tty_struct *tty)
+{
+	struct vc_data *vc = tty->driver_data;
+
+	tty_port_put(&vc->port);
+}
+
 static int default_color           = 7; /* white */
 static int default_italic_color    = 2; // green (ASCII)
 static int default_underline_color = 3; // cyan (ASCII)
@@ -3413,7 +3434,8 @@ static const struct tty_operations con_o
 	.throttle = con_throttle,
 	.unthrottle = con_unthrottle,
 	.resize = vt_resize,
-	.shutdown = con_shutdown
+	.shutdown = con_shutdown,
+	.cleanup = con_cleanup,
 };
 
 static struct cdev vc0_cdev;
diff -druNp --no-dereference linux-libre-5.6.1-gnu/drivers/tty/vt/vt_ioctl.c linux-libre-5.6.2-gnu/drivers/tty/vt/vt_ioctl.c
--- linux-libre-5.6.1-gnu/drivers/tty/vt/vt_ioctl.c	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/drivers/tty/vt/vt_ioctl.c	2020-04-02 02:02:32.000000000 -0400
@@ -39,11 +39,32 @@
 #include <linux/kbd_diacr.h>
 #include <linux/selection.h>
 
-char vt_dont_switch;
-extern struct tty_driver *console_driver;
+bool vt_dont_switch;
 
-#define VT_IS_IN_USE(i)	(console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i)	(VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+static inline bool vt_in_use(unsigned int i)
+{
+	const struct vc_data *vc = vc_cons[i].d;
+
+	/*
+	 * console_lock must be held to prevent the vc from being deallocated
+	 * while we're checking whether it's in-use.
+	 */
+	WARN_CONSOLE_UNLOCKED();
+
+	return vc && kref_read(&vc->port.kref) > 1;
+}
+
+static inline bool vt_busy(int i)
+{
+	if (vt_in_use(i))
+		return true;
+	if (i == fg_console)
+		return true;
+	if (vc_is_sel(vc_cons[i].d))
+		return true;
+
+	return false;
+}
 
 /*
  * Console (vt and kd) routines, as defined by USL SVR4 manual, and by
@@ -289,16 +310,14 @@ static int vt_disallocate(unsigned int v
 	int ret = 0;
 
 	console_lock();
-	if (VT_BUSY(vc_num))
+	if (vt_busy(vc_num))
 		ret = -EBUSY;
 	else if (vc_num)
 		vc = vc_deallocate(vc_num);
 	console_unlock();
 
-	if (vc && vc_num >= MIN_NR_CONSOLES) {
-		tty_port_destroy(&vc->port);
-		kfree(vc);
-	}
+	if (vc && vc_num >= MIN_NR_CONSOLES)
+		tty_port_put(&vc->port);
 
 	return ret;
 }
@@ -311,17 +330,15 @@ static void vt_disallocate_all(void)
 
 	console_lock();
 	for (i = 1; i < MAX_NR_CONSOLES; i++)
-		if (!VT_BUSY(i))
+		if (!vt_busy(i))
 			vc[i] = vc_deallocate(i);
 		else
 			vc[i] = NULL;
 	console_unlock();
 
 	for (i = 1; i < MAX_NR_CONSOLES; i++) {
-		if (vc[i] && i >= MIN_NR_CONSOLES) {
-			tty_port_destroy(&vc[i]->port);
-			kfree(vc[i]);
-		}
+		if (vc[i] && i >= MIN_NR_CONSOLES)
+			tty_port_put(&vc[i]->port);
 	}
 }
 
@@ -335,22 +352,13 @@ int vt_ioctl(struct tty_struct *tty,
 {
 	struct vc_data *vc = tty->driver_data;
 	struct console_font_op op;	/* used in multiple places here */
-	unsigned int console;
+	unsigned int console = vc->vc_num;
 	unsigned char ucval;
 	unsigned int uival;
 	void __user *up = (void __user *)arg;
 	int i, perm;
 	int ret = 0;
 
-	console = vc->vc_num;
-
-
-	if (!vc_cons_allocated(console)) { 	/* impossible? */
-		ret = -ENOIOCTLCMD;
-		goto out;
-	}
-
-
 	/*
 	 * To have permissions to do most of the vt ioctls, we either have
 	 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -641,15 +649,16 @@ int vt_ioctl(struct tty_struct *tty,
 		struct vt_stat __user *vtstat = up;
 		unsigned short state, mask;
 
-		/* Review: FIXME: Console lock ? */
 		if (put_user(fg_console + 1, &vtstat->v_active))
 			ret = -EFAULT;
 		else {
 			state = 1;	/* /dev/tty0 is always open */
+			console_lock(); /* required by vt_in_use() */
 			for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
 							++i, mask <<= 1)
-				if (VT_IS_IN_USE(i))
+				if (vt_in_use(i))
 					state |= mask;
+			console_unlock();
 			ret = put_user(state, &vtstat->v_state);
 		}
 		break;
@@ -659,10 +668,11 @@ int vt_ioctl(struct tty_struct *tty,
 	 * Returns the first available (non-opened) console.
 	 */
 	case VT_OPENQRY:
-		/* FIXME: locking ? - but then this is a stupid API */
+		console_lock(); /* required by vt_in_use() */
 		for (i = 0; i < MAX_NR_CONSOLES; ++i)
-			if (! VT_IS_IN_USE(i))
+			if (!vt_in_use(i))
 				break;
+		console_unlock();
 		uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
 		goto setint;		 
 
@@ -1011,12 +1021,12 @@ int vt_ioctl(struct tty_struct *tty,
 	case VT_LOCKSWITCH:
 		if (!capable(CAP_SYS_TTY_CONFIG))
 			return -EPERM;
-		vt_dont_switch = 1;
+		vt_dont_switch = true;
 		break;
 	case VT_UNLOCKSWITCH:
 		if (!capable(CAP_SYS_TTY_CONFIG))
 			return -EPERM;
-		vt_dont_switch = 0;
+		vt_dont_switch = false;
 		break;
 	case VT_GETHIFONTMASK:
 		ret = put_user(vc->vc_hi_font_mask,
@@ -1180,14 +1190,9 @@ long vt_compat_ioctl(struct tty_struct *
 {
 	struct vc_data *vc = tty->driver_data;
 	struct console_font_op op;	/* used in multiple places here */
-	unsigned int console = vc->vc_num;
 	void __user *up = compat_ptr(arg);
 	int perm;
 
-
-	if (!vc_cons_allocated(console)) 	/* impossible? */
-		return -ENOIOCTLCMD;
-
 	/*
 	 * To have permissions to do most of the vt ioctls, we either have
 	 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
diff -druNp --no-dereference linux-libre-5.6.1-gnu/include/linux/selection.h linux-libre-5.6.2-gnu/include/linux/selection.h
--- linux-libre-5.6.1-gnu/include/linux/selection.h	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/include/linux/selection.h	2020-04-02 02:02:32.000000000 -0400
@@ -11,8 +11,8 @@
 #include <linux/tiocl.h>
 #include <linux/vt_buffer.h>
 
-extern struct vc_data *sel_cons;
 struct tty_struct;
+struct vc_data;
 
 extern void clear_selection(void);
 extern int set_selection_user(const struct tiocl_selection __user *sel,
@@ -24,6 +24,8 @@ extern int sel_loadlut(char __user *p);
 extern int mouse_reporting(void);
 extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
 
+bool vc_is_sel(struct vc_data *vc);
+
 extern int console_blanked;
 
 extern const unsigned char color_table[];
diff -druNp --no-dereference linux-libre-5.6.1-gnu/include/linux/vt_kern.h linux-libre-5.6.2-gnu/include/linux/vt_kern.h
--- linux-libre-5.6.1-gnu/include/linux/vt_kern.h	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/include/linux/vt_kern.h	2020-04-02 02:02:32.000000000 -0400
@@ -135,7 +135,7 @@ extern int do_unbind_con_driver(const st
 			     int deflt);
 int vty_init(const struct file_operations *console_fops);
 
-extern char vt_dont_switch;
+extern bool vt_dont_switch;
 extern int default_utf8;
 extern int global_cursor_default;
 
diff -druNp --no-dereference linux-libre-5.6.1-gnu/Makefile linux-libre-5.6.2-gnu/Makefile
--- linux-libre-5.6.1-gnu/Makefile	2020-04-01 05:43:30.000000000 -0400
+++ linux-libre-5.6.2-gnu/Makefile	2020-04-02 02:30:55.000000000 -0400
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 6
-SUBLEVEL = 1
+SUBLEVEL = 2
 EXTRAVERSION = -gnu
 NAME = Kleptomaniac Octopus
 
diff -druNp --no-dereference linux-libre-5.6.1-gnu/net/mac80211/tx.c linux-libre-5.6.2-gnu/net/mac80211/tx.c
--- linux-libre-5.6.1-gnu/net/mac80211/tx.c	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/net/mac80211/tx.c	2020-04-02 02:02:32.000000000 -0400
@@ -3610,7 +3610,8 @@ begin:
 		 * Drop unicast frames to unauthorised stations unless they are
 		 * EAPOL frames from the local station.
 		 */
-		if (unlikely(!ieee80211_vif_is_mesh(&tx.sdata->vif) &&
+		if (unlikely(ieee80211_is_data(hdr->frame_control) &&
+			     !ieee80211_vif_is_mesh(&tx.sdata->vif) &&
 			     tx.sdata->vif.type != NL80211_IFTYPE_OCB &&
 			     !is_multicast_ether_addr(hdr->addr1) &&
 			     !test_sta_flag(tx.sta, WLAN_STA_AUTHORIZED) &&
diff -druNp --no-dereference linux-libre-5.6.1-gnu/tools/testing/selftests/bpf/verifier/jmp32.c linux-libre-5.6.2-gnu/tools/testing/selftests/bpf/verifier/jmp32.c
--- linux-libre-5.6.1-gnu/tools/testing/selftests/bpf/verifier/jmp32.c	2020-04-01 04:58:19.000000000 -0400
+++ linux-libre-5.6.2-gnu/tools/testing/selftests/bpf/verifier/jmp32.c	2020-04-02 02:02:32.000000000 -0400
@@ -783,7 +783,8 @@
 	},
 	.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	.fixup_map_hash_48b = { 4 },
-	.result = ACCEPT,
+	.result = REJECT,
+	.errstr = "R8 unbounded memory access",
 	.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 },
 {
@@ -811,7 +812,8 @@
 	},
 	.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	.fixup_map_hash_48b = { 4 },
-	.result = ACCEPT,
+	.result = REJECT,
+	.errstr = "R8 unbounded memory access",
 	.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 },
 {
@@ -839,6 +841,7 @@
 	},
 	.prog_type = BPF_PROG_TYPE_SCHED_CLS,
 	.fixup_map_hash_48b = { 4 },
-	.result = ACCEPT,
+	.result = REJECT,
+	.errstr = "R8 unbounded memory access",
 	.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 },
