diff --git linux-libre-4.19.222-gnu1/Documentation/admin-guide/kernel-parameters.txt linux-libre-4.19.223-gnu1/Documentation/admin-guide/kernel-parameters.txt
index f179e20eb8a0..607db9519cfb 100644
--- linux-libre-4.19.222-gnu1/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-4.19.223-gnu1/Documentation/admin-guide/kernel-parameters.txt
@@ -2019,8 +2019,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
diff --git linux-libre-4.19.222-gnu1/Documentation/networking/bonding.txt linux-libre-4.19.223-gnu1/Documentation/networking/bonding.txt
index d3e5dd26db12..4035a495c060 100644
--- linux-libre-4.19.222-gnu1/Documentation/networking/bonding.txt
+++ linux-libre-4.19.223-gnu1/Documentation/networking/bonding.txt
@@ -191,11 +191,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
diff --git linux-libre-4.19.222-gnu1/Makefile linux-libre-4.19.223-gnu1/Makefile
index 86830466d411..aa0af823556d 100644
--- linux-libre-4.19.222-gnu1/Makefile
+++ linux-libre-4.19.223-gnu1/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 222
+SUBLEVEL = 223
 EXTRAVERSION = -gnu1
 NAME = "People's Front"
 
diff --git linux-libre-4.19.222-gnu1/arch/arm/kernel/entry-armv.S linux-libre-4.19.223-gnu1/arch/arm/kernel/entry-armv.S
index 89e551eebff1..cde22c04ad2b 100644
--- linux-libre-4.19.222-gnu1/arch/arm/kernel/entry-armv.S
+++ linux-libre-4.19.223-gnu1/arch/arm/kernel/entry-armv.S
@@ -620,11 +620,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -633,7 +631,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 
diff --git linux-libre-4.19.222-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts linux-libre-4.19.223-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index 1238de25a969..9b1789504f7a 100644
--- linux-libre-4.19.222-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ linux-libre-4.19.223-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -72,7 +72,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-4.19.222-gnu1/arch/parisc/kernel/syscall.S linux-libre-4.19.223-gnu1/arch/parisc/kernel/syscall.S
index 61a647a55c69..1ae007ec65c5 100644
--- linux-libre-4.19.222-gnu1/arch/parisc/kernel/syscall.S
+++ linux-libre-4.19.223-gnu1/arch/parisc/kernel/syscall.S
@@ -478,7 +478,7 @@ lws_start:
 	extrd,u	%r1,PSW_W_BIT,1,%r1
 	/* sp must be aligned on 4, so deposit the W bit setting into
 	 * the bottom of sp temporarily */
-	or,ev	%r1,%r30,%r30
+	or,od	%r1,%r30,%r30
 
 	/* Clip LWS number to a 32-bit value for 32-bit processes */
 	depdi	0, 31, 32, %r20
diff --git linux-libre-4.19.222-gnu1/arch/x86/include/asm/pgtable.h linux-libre-4.19.223-gnu1/arch/x86/include/asm/pgtable.h
index 2a9c12ffb5cb..7de459cf36b5 100644
--- linux-libre-4.19.222-gnu1/arch/x86/include/asm/pgtable.h
+++ linux-libre-4.19.223-gnu1/arch/x86/include/asm/pgtable.h
@@ -1356,8 +1356,8 @@ static inline pmd_t pmd_swp_clear_soft_dirty(pmd_t pmd)
 #endif
 #endif
 
-#define PKRU_AD_BIT 0x1
-#define PKRU_WD_BIT 0x2
+#define PKRU_AD_BIT 0x1u
+#define PKRU_WD_BIT 0x2u
 #define PKRU_BITS_PER_PKEY 2
 
 static inline bool __pkru_allows_read(u32 pkru, u16 pkey)
diff --git linux-libre-4.19.222-gnu1/block/bfq-iosched.c linux-libre-4.19.223-gnu1/block/bfq-iosched.c
index b2bad345c523..c2529dfda3e5 100644
--- linux-libre-4.19.222-gnu1/block/bfq-iosched.c
+++ linux-libre-4.19.223-gnu1/block/bfq-iosched.c
@@ -625,12 +625,13 @@ void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 }
 
 /*
- * Tell whether there are active queues or groups with differentiated weights.
+ * Tell whether there are active queues with different weights or
+ * active groups.
  */
-static bool bfq_differentiated_weights(struct bfq_data *bfqd)
+static bool bfq_varied_queue_weights_or_active_groups(struct bfq_data *bfqd)
 {
 	/*
-	 * For weights to differ, at least one of the trees must contain
+	 * For queue weights to differ, queue_weights_tree must contain
 	 * at least two nodes.
 	 */
 	return (!RB_EMPTY_ROOT(&bfqd->queue_weights_tree) &&
@@ -638,9 +639,7 @@ static bool bfq_differentiated_weights(struct bfq_data *bfqd)
 		 bfqd->queue_weights_tree.rb_node->rb_right)
 #ifdef CONFIG_BFQ_GROUP_IOSCHED
 	       ) ||
-	       (!RB_EMPTY_ROOT(&bfqd->group_weights_tree) &&
-		(bfqd->group_weights_tree.rb_node->rb_left ||
-		 bfqd->group_weights_tree.rb_node->rb_right)
+		(bfqd->num_groups_with_pending_reqs > 0
 #endif
 	       );
 }
@@ -658,26 +657,25 @@ static bool bfq_differentiated_weights(struct bfq_data *bfqd)
  * 3) all active groups at the same level in the groups tree have the same
  *    number of children.
  *
- * Unfortunately, keeping the necessary state for evaluating exactly the
- * above symmetry conditions would be quite complex and time-consuming.
- * Therefore this function evaluates, instead, the following stronger
- * sub-conditions, for which it is much easier to maintain the needed
- * state:
+ * Unfortunately, keeping the necessary state for evaluating exactly
+ * the last two symmetry sub-conditions above would be quite complex
+ * and time consuming.  Therefore this function evaluates, instead,
+ * only the following stronger two sub-conditions, for which it is
+ * much easier to maintain the needed state:
  * 1) all active queues have the same weight,
- * 2) all active groups have the same weight,
- * 3) all active groups have at most one active child each.
- * In particular, the last two conditions are always true if hierarchical
- * support and the cgroups interface are not enabled, thus no state needs
- * to be maintained in this case.
+ * 2) there are no active groups.
+ * In particular, the last condition is always true if hierarchical
+ * support or the cgroups interface are not enabled, thus no state
+ * needs to be maintained in this case.
  */
 static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
 {
-	return !bfq_differentiated_weights(bfqd);
+	return !bfq_varied_queue_weights_or_active_groups(bfqd);
 }
 
 /*
  * If the weight-counter tree passed as input contains no counter for
- * the weight of the input entity, then add that counter; otherwise just
+ * the weight of the input queue, then add that counter; otherwise just
  * increment the existing counter.
  *
  * Note that weight-counter trees contain few nodes in mostly symmetric
@@ -688,25 +686,25 @@ static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
  * In most scenarios, the rate at which nodes are created/destroyed
  * should be low too.
  */
-void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_entity *entity,
+void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 			  struct rb_root *root)
 {
+	struct bfq_entity *entity = &bfqq->entity;
 	struct rb_node **new = &(root->rb_node), *parent = NULL;
 
 	/*
-	 * Do not insert if the entity is already associated with a
+	 * Do not insert if the queue is already associated with a
 	 * counter, which happens if:
-	 *   1) the entity is associated with a queue,
-	 *   2) a request arrival has caused the queue to become both
+	 *   1) a request arrival has caused the queue to become both
 	 *      non-weight-raised, and hence change its weight, and
 	 *      backlogged; in this respect, each of the two events
 	 *      causes an invocation of this function,
-	 *   3) this is the invocation of this function caused by the
+	 *   2) this is the invocation of this function caused by the
 	 *      second event. This second invocation is actually useless,
 	 *      and we handle this fact by exiting immediately. More
 	 *      efficient or clearer solutions might possibly be adopted.
 	 */
-	if (entity->weight_counter)
+	if (bfqq->weight_counter)
 		return;
 
 	while (*new) {
@@ -716,7 +714,7 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_entity *entity,
 		parent = *new;
 
 		if (entity->weight == __counter->weight) {
-			entity->weight_counter = __counter;
+			bfqq->weight_counter = __counter;
 			goto inc_counter;
 		}
 		if (entity->weight < __counter->weight)
@@ -725,68 +723,68 @@ void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_entity *entity,
 			new = &((*new)->rb_right);
 	}
 
-	entity->weight_counter = kzalloc(sizeof(struct bfq_weight_counter),
-					 GFP_ATOMIC);
+	bfqq->weight_counter = kzalloc(sizeof(struct bfq_weight_counter),
+				       GFP_ATOMIC);
 
 	/*
 	 * In the unlucky event of an allocation failure, we just
-	 * exit. This will cause the weight of entity to not be
-	 * considered in bfq_differentiated_weights, which, in its
-	 * turn, causes the scenario to be deemed wrongly symmetric in
-	 * case entity's weight would have been the only weight making
-	 * the scenario asymmetric. On the bright side, no unbalance
-	 * will however occur when entity becomes inactive again (the
-	 * invocation of this function is triggered by an activation
-	 * of entity). In fact, bfq_weights_tree_remove does nothing
-	 * if !entity->weight_counter.
+	 * exit. This will cause the weight of queue to not be
+	 * considered in bfq_varied_queue_weights_or_active_groups,
+	 * which, in its turn, causes the scenario to be deemed
+	 * wrongly symmetric in case bfqq's weight would have been
+	 * the only weight making the scenario asymmetric.  On the
+	 * bright side, no unbalance will however occur when bfqq
+	 * becomes inactive again (the invocation of this function
+	 * is triggered by an activation of queue).  In fact,
+	 * bfq_weights_tree_remove does nothing if
+	 * !bfqq->weight_counter.
 	 */
-	if (unlikely(!entity->weight_counter))
+	if (unlikely(!bfqq->weight_counter))
 		return;
 
-	entity->weight_counter->weight = entity->weight;
-	rb_link_node(&entity->weight_counter->weights_node, parent, new);
-	rb_insert_color(&entity->weight_counter->weights_node, root);
+	bfqq->weight_counter->weight = entity->weight;
+	rb_link_node(&bfqq->weight_counter->weights_node, parent, new);
+	rb_insert_color(&bfqq->weight_counter->weights_node, root);
 
 inc_counter:
-	entity->weight_counter->num_active++;
+	bfqq->weight_counter->num_active++;
+	bfqq->ref++;
 }
 
 /*
- * Decrement the weight counter associated with the entity, and, if the
+ * Decrement the weight counter associated with the queue, and, if the
  * counter reaches 0, remove the counter from the tree.
  * See the comments to the function bfq_weights_tree_add() for considerations
  * about overhead.
  */
 void __bfq_weights_tree_remove(struct bfq_data *bfqd,
-			       struct bfq_entity *entity,
+			       struct bfq_queue *bfqq,
 			       struct rb_root *root)
 {
-	if (!entity->weight_counter)
+	if (!bfqq->weight_counter)
 		return;
 
-	entity->weight_counter->num_active--;
-	if (entity->weight_counter->num_active > 0)
+	bfqq->weight_counter->num_active--;
+	if (bfqq->weight_counter->num_active > 0)
 		goto reset_entity_pointer;
 
-	rb_erase(&entity->weight_counter->weights_node, root);
-	kfree(entity->weight_counter);
+	rb_erase(&bfqq->weight_counter->weights_node, root);
+	kfree(bfqq->weight_counter);
 
 reset_entity_pointer:
-	entity->weight_counter = NULL;
+	bfqq->weight_counter = NULL;
+	bfq_put_queue(bfqq);
 }
 
 /*
- * Invoke __bfq_weights_tree_remove on bfqq and all its inactive
- * parent entities.
+ * Invoke __bfq_weights_tree_remove on bfqq and decrement the number
+ * of active groups for each queue's inactive parent entity.
  */
 void bfq_weights_tree_remove(struct bfq_data *bfqd,
 			     struct bfq_queue *bfqq)
 {
 	struct bfq_entity *entity = bfqq->entity.parent;
 
-	__bfq_weights_tree_remove(bfqd, &bfqq->entity,
-				  &bfqd->queue_weights_tree);
-
 	for_each_entity(entity) {
 		struct bfq_sched_data *sd = entity->my_sched_data;
 
@@ -798,18 +796,37 @@ void bfq_weights_tree_remove(struct bfq_data *bfqd,
 			 * next_in_service for details on why
 			 * in_service_entity must be checked too).
 			 *
-			 * As a consequence, the weight of entity is
-			 * not to be removed. In addition, if entity
-			 * is active, then its parent entities are
-			 * active as well, and thus their weights are
-			 * not to be removed either. In the end, this
-			 * loop must stop here.
+			 * As a consequence, its parent entities are
+			 * active as well, and thus this loop must
+			 * stop here.
 			 */
 			break;
 		}
-		__bfq_weights_tree_remove(bfqd, entity,
-					  &bfqd->group_weights_tree);
+
+		/*
+		 * The decrement of num_groups_with_pending_reqs is
+		 * not performed immediately upon the deactivation of
+		 * entity, but it is delayed to when it also happens
+		 * that the first leaf descendant bfqq of entity gets
+		 * all its pending requests completed. The following
+		 * instructions perform this delayed decrement, if
+		 * needed. See the comments on
+		 * num_groups_with_pending_reqs for details.
+		 */
+		if (entity->in_groups_with_pending_reqs) {
+			entity->in_groups_with_pending_reqs = false;
+			bfqd->num_groups_with_pending_reqs--;
+		}
 	}
+
+	/*
+	 * Next function is invoked last, because it causes bfqq to be
+	 * freed if the following holds: bfqq is not in service and
+	 * has no dispatched request. DO NOT use bfqq after the next
+	 * function invocation.
+	 */
+	__bfq_weights_tree_remove(bfqd, bfqq,
+				  &bfqd->queue_weights_tree);
 }
 
 /*
@@ -1003,7 +1020,8 @@ bfq_bfqq_resume_state(struct bfq_queue *bfqq, struct bfq_data *bfqd,
 
 static int bfqq_process_refs(struct bfq_queue *bfqq)
 {
-	return bfqq->ref - bfqq->allocated - bfqq->entity.on_st;
+	return bfqq->ref - bfqq->allocated - bfqq->entity.on_st -
+		(bfqq->weight_counter != NULL);
 }
 
 /* Empty burst list and add just bfqq (see comments on bfq_handle_burst) */
@@ -2798,7 +2816,7 @@ static void bfq_dispatch_remove(struct request_queue *q, struct request *rq)
 	bfq_remove_request(q, rq);
 }
 
-static void __bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq)
+static bool __bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 {
 	/*
 	 * If this bfqq is shared between multiple processes, check
@@ -2831,9 +2849,11 @@ static void __bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 	/*
 	 * All in-service entities must have been properly deactivated
 	 * or requeued before executing the next function, which
-	 * resets all in-service entites as no more in service.
+	 * resets all in-service entities as no more in service. This
+	 * may cause bfqq to be freed. If this happens, the next
+	 * function returns true.
 	 */
-	__bfq_bfqd_reset_in_service(bfqd);
+	return __bfq_bfqd_reset_in_service(bfqd);
 }
 
 /**
@@ -3238,7 +3258,6 @@ void bfq_bfqq_expire(struct bfq_data *bfqd,
 	bool slow;
 	unsigned long delta = 0;
 	struct bfq_entity *entity = &bfqq->entity;
-	int ref;
 
 	/*
 	 * Check whether the process is slow (see bfq_bfqq_is_slow).
@@ -3307,10 +3326,8 @@ void bfq_bfqq_expire(struct bfq_data *bfqd,
 	 * reason.
 	 */
 	__bfq_bfqq_recalc_budget(bfqd, bfqq, reason);
-	ref = bfqq->ref;
-	__bfq_bfqq_expire(bfqd, bfqq);
-
-	if (ref == 1) /* bfqq is gone, no more actions on it */
+	if (__bfq_bfqq_expire(bfqd, bfqq))
+		/* bfqq is gone, no more actions on it */
 		return;
 
 	bfqq->injected_service = 0;
@@ -3521,9 +3538,11 @@ static bool bfq_better_to_idle(struct bfq_queue *bfqq)
 	 * symmetric scenario where:
 	 * (i)  each of these processes must get the same throughput as
 	 *      the others;
-	 * (ii) all these processes have the same I/O pattern
-		(either sequential or random).
-	 * In fact, in such a scenario, the drive will tend to treat
+	 * (ii) the I/O of each process has the same properties, in
+	 *      terms of locality (sequential or random), direction
+	 *      (reads or writes), request sizes, greediness
+	 *      (from I/O-bound to sporadic), and so on.
+	 * In fact, in such a scenario, the drive tends to treat
 	 * the requests of each of these processes in about the same
 	 * way as the requests of the others, and thus to provide
 	 * each of these processes with about the same throughput
@@ -3532,18 +3551,67 @@ static bool bfq_better_to_idle(struct bfq_queue *bfqq)
 	 * certainly needed to guarantee that bfqq receives its
 	 * assigned fraction of the device throughput (see [1] for
 	 * details).
+	 * The problem is that idling may significantly reduce
+	 * throughput with certain combinations of types of I/O and
+	 * devices. An important example is sync random I/O, on flash
+	 * storage with command queueing. So, unless bfqq falls in the
+	 * above cases where idling also boosts throughput, it would
+	 * be important to check conditions (i) and (ii) accurately,
+	 * so as to avoid idling when not strictly needed for service
+	 * guarantees.
+	 *
+	 * Unfortunately, it is extremely difficult to thoroughly
+	 * check condition (ii). And, in case there are active groups,
+	 * it becomes very difficult to check condition (i) too. In
+	 * fact, if there are active groups, then, for condition (i)
+	 * to become false, it is enough that an active group contains
+	 * more active processes or sub-groups than some other active
+	 * group. More precisely, for condition (i) to hold because of
+	 * such a group, it is not even necessary that the group is
+	 * (still) active: it is sufficient that, even if the group
+	 * has become inactive, some of its descendant processes still
+	 * have some request already dispatched but still waiting for
+	 * completion. In fact, requests have still to be guaranteed
+	 * their share of the throughput even after being
+	 * dispatched. In this respect, it is easy to show that, if a
+	 * group frequently becomes inactive while still having
+	 * in-flight requests, and if, when this happens, the group is
+	 * not considered in the calculation of whether the scenario
+	 * is asymmetric, then the group may fail to be guaranteed its
+	 * fair share of the throughput (basically because idling may
+	 * not be performed for the descendant processes of the group,
+	 * but it had to be).  We address this issue with the
+	 * following bi-modal behavior, implemented in the function
+	 * bfq_symmetric_scenario().
+	 *
+	 * If there are groups with requests waiting for completion
+	 * (as commented above, some of these groups may even be
+	 * already inactive), then the scenario is tagged as
+	 * asymmetric, conservatively, without checking any of the
+	 * conditions (i) and (ii). So the device is idled for bfqq.
+	 * This behavior matches also the fact that groups are created
+	 * exactly if controlling I/O is a primary concern (to
+	 * preserve bandwidth and latency guarantees).
+	 *
+	 * On the opposite end, if there are no groups with requests
+	 * waiting for completion, then only condition (i) is actually
+	 * controlled, i.e., provided that condition (i) holds, idling
+	 * is not performed, regardless of whether condition (ii)
+	 * holds. In other words, only if condition (i) does not hold,
+	 * then idling is allowed, and the device tends to be
+	 * prevented from queueing many requests, possibly of several
+	 * processes. Since there are no groups with requests waiting
+	 * for completion, then, to control condition (i) it is enough
+	 * to check just whether all the queues with requests waiting
+	 * for completion also have the same weight.
 	 *
-	 * We address this issue by controlling, actually, only the
-	 * symmetry sub-condition (i), i.e., provided that
-	 * sub-condition (i) holds, idling is not performed,
-	 * regardless of whether sub-condition (ii) holds. In other
-	 * words, only if sub-condition (i) holds, then idling is
-	 * allowed, and the device tends to be prevented from queueing
-	 * many requests, possibly of several processes. The reason
-	 * for not controlling also sub-condition (ii) is that we
-	 * exploit preemption to preserve guarantees in case of
-	 * symmetric scenarios, even if (ii) does not hold, as
-	 * explained in the next two paragraphs.
+	 * Not checking condition (ii) evidently exposes bfqq to the
+	 * risk of getting less throughput than its fair share.
+	 * However, for queues with the same weight, a further
+	 * mechanism, preemption, mitigates or even eliminates this
+	 * problem. And it does so without consequences on overall
+	 * throughput. This mechanism and its benefits are explained
+	 * in the next three paragraphs.
 	 *
 	 * Even if a queue, say Q, is expired when it remains idle, Q
 	 * can still preempt the new in-service queue if the next
@@ -3557,11 +3625,7 @@ static bool bfq_better_to_idle(struct bfq_queue *bfqq)
 	 * idling allows the internal queues of the device to contain
 	 * many requests, and thus to reorder requests, we can rather
 	 * safely assume that the internal scheduler still preserves a
-	 * minimum of mid-term fairness. The motivation for using
-	 * preemption instead of idling is that, by not idling,
-	 * service guarantees are preserved without minimally
-	 * sacrificing throughput. In other words, both a high
-	 * throughput and its desired distribution are obtained.
+	 * minimum of mid-term fairness.
 	 *
 	 * More precisely, this preemption-based, idleless approach
 	 * provides fairness in terms of IOPS, and not sectors per
@@ -3580,27 +3644,28 @@ static bool bfq_better_to_idle(struct bfq_queue *bfqq)
 	 * 1024/8 times as high as the service received by the other
 	 * queue.
 	 *
-	 * On the other hand, device idling is performed, and thus
-	 * pure sector-domain guarantees are provided, for the
-	 * following queues, which are likely to need stronger
-	 * throughput guarantees: weight-raised queues, and queues
-	 * with a higher weight than other queues. When such queues
-	 * are active, sub-condition (i) is false, which triggers
-	 * device idling.
+	 * The motivation for using preemption instead of idling (for
+	 * queues with the same weight) is that, by not idling,
+	 * service guarantees are preserved (completely or at least in
+	 * part) without minimally sacrificing throughput. And, if
+	 * there is no active group, then the primary expectation for
+	 * this device is probably a high throughput.
 	 *
-	 * According to the above considerations, the next variable is
-	 * true (only) if sub-condition (i) holds. To compute the
-	 * value of this variable, we not only use the return value of
-	 * the function bfq_symmetric_scenario(), but also check
-	 * whether bfqq is being weight-raised, because
-	 * bfq_symmetric_scenario() does not take into account also
-	 * weight-raised queues (see comments on
-	 * bfq_weights_tree_add()). In particular, if bfqq is being
-	 * weight-raised, it is important to idle only if there are
-	 * other, non-weight-raised queues that may steal throughput
-	 * to bfqq. Actually, we should be even more precise, and
-	 * differentiate between interactive weight raising and
-	 * soft real-time weight raising.
+	 * We are now left only with explaining the additional
+	 * compound condition that is checked below for deciding
+	 * whether the scenario is asymmetric. To explain this
+	 * compound condition, we need to add that the function
+	 * bfq_symmetric_scenario checks the weights of only
+	 * non-weight-raised queues, for efficiency reasons (see
+	 * comments on bfq_weights_tree_add()). Then the fact that
+	 * bfqq is weight-raised is checked explicitly here. More
+	 * precisely, the compound condition below takes into account
+	 * also the fact that, even if bfqq is being weight-raised,
+	 * the scenario is still symmetric if all queues with requests
+	 * waiting for completion happen to be
+	 * weight-raised. Actually, we should be even more precise
+	 * here, and differentiate between interactive weight raising
+	 * and soft real-time weight raising.
 	 *
 	 * As a side note, it is worth considering that the above
 	 * device-idling countermeasures may however fail in the
@@ -5422,7 +5487,7 @@ static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
 	bfqd->idle_slice_timer.function = bfq_idle_slice_timer;
 
 	bfqd->queue_weights_tree = RB_ROOT;
-	bfqd->group_weights_tree = RB_ROOT;
+	bfqd->num_groups_with_pending_reqs = 0;
 
 	INIT_LIST_HEAD(&bfqd->active_list);
 	INIT_LIST_HEAD(&bfqd->idle_list);
diff --git linux-libre-4.19.222-gnu1/block/bfq-iosched.h linux-libre-4.19.223-gnu1/block/bfq-iosched.h
index a41e9884f2dd..ca98c98a8179 100644
--- linux-libre-4.19.222-gnu1/block/bfq-iosched.h
+++ linux-libre-4.19.223-gnu1/block/bfq-iosched.h
@@ -108,15 +108,14 @@ struct bfq_sched_data {
 };
 
 /**
- * struct bfq_weight_counter - counter of the number of all active entities
+ * struct bfq_weight_counter - counter of the number of all active queues
  *                             with a given weight.
  */
 struct bfq_weight_counter {
-	unsigned int weight; /* weight of the entities this counter refers to */
-	unsigned int num_active; /* nr of active entities with this weight */
+	unsigned int weight; /* weight of the queues this counter refers to */
+	unsigned int num_active; /* nr of active queues with this weight */
 	/*
-	 * Weights tree member (see bfq_data's @queue_weights_tree and
-	 * @group_weights_tree)
+	 * Weights tree member (see bfq_data's @queue_weights_tree)
 	 */
 	struct rb_node weights_node;
 };
@@ -151,8 +150,6 @@ struct bfq_weight_counter {
 struct bfq_entity {
 	/* service_tree member */
 	struct rb_node rb_node;
-	/* pointer to the weight counter associated with this entity */
-	struct bfq_weight_counter *weight_counter;
 
 	/*
 	 * Flag, true if the entity is on a tree (either the active or
@@ -199,6 +196,9 @@ struct bfq_entity {
 
 	/* flag, set to request a weight, ioprio or ioprio_class change  */
 	int prio_changed;
+
+	/* flag, set if the entity is counted in groups_with_pending_reqs */
+	bool in_groups_with_pending_reqs;
 };
 
 struct bfq_group;
@@ -266,6 +266,9 @@ struct bfq_queue {
 	/* entity representing this queue in the scheduler */
 	struct bfq_entity entity;
 
+	/* pointer to the weight counter associated with this entity */
+	struct bfq_weight_counter *weight_counter;
+
 	/* maximum budget allowed from the feedback mechanism */
 	int max_budget;
 	/* budget expiration (in jiffies) */
@@ -448,15 +451,54 @@ struct bfq_data {
 	 * bfq_weights_tree_[add|remove] for further details).
 	 */
 	struct rb_root queue_weights_tree;
+
 	/*
-	 * rbtree of non-queue @bfq_entity weight counters, sorted by
-	 * weight. Used to keep track of whether all @bfq_groups have
-	 * the same weight. The tree contains one counter for each
-	 * distinct weight associated to some active @bfq_group (see
-	 * the comments to the functions bfq_weights_tree_[add|remove]
-	 * for further details).
+	 * Number of groups with at least one descendant process that
+	 * has at least one request waiting for completion. Note that
+	 * this accounts for also requests already dispatched, but not
+	 * yet completed. Therefore this number of groups may differ
+	 * (be larger) than the number of active groups, as a group is
+	 * considered active only if its corresponding entity has
+	 * descendant queues with at least one request queued. This
+	 * number is used to decide whether a scenario is symmetric.
+	 * For a detailed explanation see comments on the computation
+	 * of the variable asymmetric_scenario in the function
+	 * bfq_better_to_idle().
+	 *
+	 * However, it is hard to compute this number exactly, for
+	 * groups with multiple descendant processes. Consider a group
+	 * that is inactive, i.e., that has no descendant process with
+	 * pending I/O inside BFQ queues. Then suppose that
+	 * num_groups_with_pending_reqs is still accounting for this
+	 * group, because the group has descendant processes with some
+	 * I/O request still in flight. num_groups_with_pending_reqs
+	 * should be decremented when the in-flight request of the
+	 * last descendant process is finally completed (assuming that
+	 * nothing else has changed for the group in the meantime, in
+	 * terms of composition of the group and active/inactive state of child
+	 * groups and processes). To accomplish this, an additional
+	 * pending-request counter must be added to entities, and must
+	 * be updated correctly. To avoid this additional field and operations,
+	 * we resort to the following tradeoff between simplicity and
+	 * accuracy: for an inactive group that is still counted in
+	 * num_groups_with_pending_reqs, we decrement
+	 * num_groups_with_pending_reqs when the first descendant
+	 * process of the group remains with no request waiting for
+	 * completion.
+	 *
+	 * Even this simpler decrement strategy requires a little
+	 * carefulness: to avoid multiple decrements, we flag a group,
+	 * more precisely an entity representing a group, as still
+	 * counted in num_groups_with_pending_reqs when it becomes
+	 * inactive. Then, when the first descendant queue of the
+	 * entity remains with no request waiting for completion,
+	 * num_groups_with_pending_reqs is decremented, and this flag
+	 * is reset. After this flag is reset for the entity,
+	 * num_groups_with_pending_reqs won't be decremented any
+	 * longer in case a new descendant queue of the entity remains
+	 * with no request waiting for completion.
 	 */
-	struct rb_root group_weights_tree;
+	unsigned int num_groups_with_pending_reqs;
 
 	/*
 	 * Number of bfq_queues containing requests (including the
@@ -854,10 +896,10 @@ struct bfq_queue *bic_to_bfqq(struct bfq_io_cq *bic, bool is_sync);
 void bic_set_bfqq(struct bfq_io_cq *bic, struct bfq_queue *bfqq, bool is_sync);
 struct bfq_data *bic_to_bfqd(struct bfq_io_cq *bic);
 void bfq_pos_tree_add_move(struct bfq_data *bfqd, struct bfq_queue *bfqq);
-void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_entity *entity,
+void bfq_weights_tree_add(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 			  struct rb_root *root);
 void __bfq_weights_tree_remove(struct bfq_data *bfqd,
-			       struct bfq_entity *entity,
+			       struct bfq_queue *bfqq,
 			       struct rb_root *root);
 void bfq_weights_tree_remove(struct bfq_data *bfqd,
 			     struct bfq_queue *bfqq);
@@ -951,7 +993,7 @@ bool __bfq_deactivate_entity(struct bfq_entity *entity,
 			     bool ins_into_idle_tree);
 bool next_queue_may_preempt(struct bfq_data *bfqd);
 struct bfq_queue *bfq_get_next_queue(struct bfq_data *bfqd);
-void __bfq_bfqd_reset_in_service(struct bfq_data *bfqd);
+bool __bfq_bfqd_reset_in_service(struct bfq_data *bfqd);
 void bfq_deactivate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 			 bool ins_into_idle_tree, bool expiration);
 void bfq_activate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq);
diff --git linux-libre-4.19.222-gnu1/block/bfq-wf2q.c linux-libre-4.19.223-gnu1/block/bfq-wf2q.c
index ff7c2d470bb8..11ff5ceae02b 100644
--- linux-libre-4.19.222-gnu1/block/bfq-wf2q.c
+++ linux-libre-4.19.223-gnu1/block/bfq-wf2q.c
@@ -788,25 +788,23 @@ __bfq_entity_update_weight_prio(struct bfq_service_tree *old_st,
 		new_weight = entity->orig_weight *
 			     (bfqq ? bfqq->wr_coeff : 1);
 		/*
-		 * If the weight of the entity changes, remove the entity
-		 * from its old weight counter (if there is a counter
-		 * associated with the entity), and add it to the counter
-		 * associated with its new weight.
+		 * If the weight of the entity changes, and the entity is a
+		 * queue, remove the entity from its old weight counter (if
+		 * there is a counter associated with the entity).
 		 */
-		if (prev_weight != new_weight) {
-			root = bfqq ? &bfqd->queue_weights_tree :
-				      &bfqd->group_weights_tree;
-			__bfq_weights_tree_remove(bfqd, entity, root);
+		if (prev_weight != new_weight && bfqq) {
+			root = &bfqd->queue_weights_tree;
+			__bfq_weights_tree_remove(bfqd, bfqq, root);
 		}
 		entity->weight = new_weight;
 		/*
-		 * Add the entity to its weights tree only if it is
-		 * not associated with a weight-raised queue.
+		 * Add the entity, if it is not a weight-raised queue,
+		 * to the counter associated with its new weight.
 		 */
-		if (prev_weight != new_weight &&
-		    (bfqq ? bfqq->wr_coeff == 1 : 1))
+		if (prev_weight != new_weight && bfqq && bfqq->wr_coeff == 1) {
 			/* If we get here, root has been initialized. */
-			bfq_weights_tree_add(bfqd, entity, root);
+			bfq_weights_tree_add(bfqd, bfqq, root);
+		}
 
 		new_st->wsum += entity->weight;
 
@@ -1012,9 +1010,12 @@ static void __bfq_activate_entity(struct bfq_entity *entity,
 	if (!bfq_entity_to_bfqq(entity)) { /* bfq_group */
 		struct bfq_group *bfqg =
 			container_of(entity, struct bfq_group, entity);
+		struct bfq_data *bfqd = bfqg->bfqd;
 
-		bfq_weights_tree_add(bfqg->bfqd, entity,
-				     &bfqd->group_weights_tree);
+		if (!entity->in_groups_with_pending_reqs) {
+			entity->in_groups_with_pending_reqs = true;
+			bfqd->num_groups_with_pending_reqs++;
+		}
 	}
 #endif
 
@@ -1599,7 +1600,8 @@ struct bfq_queue *bfq_get_next_queue(struct bfq_data *bfqd)
 	return bfqq;
 }
 
-void __bfq_bfqd_reset_in_service(struct bfq_data *bfqd)
+/* returns true if the in-service queue gets freed */
+bool __bfq_bfqd_reset_in_service(struct bfq_data *bfqd)
 {
 	struct bfq_queue *in_serv_bfqq = bfqd->in_service_queue;
 	struct bfq_entity *in_serv_entity = &in_serv_bfqq->entity;
@@ -1623,8 +1625,20 @@ void __bfq_bfqd_reset_in_service(struct bfq_data *bfqd)
 	 * service tree either, then release the service reference to
 	 * the queue it represents (taken with bfq_get_entity).
 	 */
-	if (!in_serv_entity->on_st)
+	if (!in_serv_entity->on_st) {
+		/*
+		 * If no process is referencing in_serv_bfqq any
+		 * longer, then the service reference may be the only
+		 * reference to the queue. If this is the case, then
+		 * bfqq gets freed here.
+		 */
+		int ref = in_serv_bfqq->ref;
 		bfq_put_queue(in_serv_bfqq);
+		if (ref == 1)
+			return true;
+	}
+
+	return false;
 }
 
 void bfq_deactivate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
@@ -1667,15 +1681,15 @@ void bfq_del_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 
 	bfqd->busy_queues--;
 
-	if (!bfqq->dispatched)
-		bfq_weights_tree_remove(bfqd, bfqq);
-
 	if (bfqq->wr_coeff > 1)
 		bfqd->wr_busy_queues--;
 
 	bfqg_stats_update_dequeue(bfqq_group(bfqq));
 
 	bfq_deactivate_bfqq(bfqd, bfqq, true, expiration);
+
+	if (!bfqq->dispatched)
+		bfq_weights_tree_remove(bfqd, bfqq);
 }
 
 /*
@@ -1692,7 +1706,7 @@ void bfq_add_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 
 	if (!bfqq->dispatched)
 		if (bfqq->wr_coeff == 1)
-			bfq_weights_tree_add(bfqd, &bfqq->entity,
+			bfq_weights_tree_add(bfqd, bfqq,
 					     &bfqd->queue_weights_tree);
 
 	if (bfqq->wr_coeff > 1)
diff --git linux-libre-4.19.222-gnu1/drivers/char/ipmi/ipmi_msghandler.c linux-libre-4.19.223-gnu1/drivers/char/ipmi/ipmi_msghandler.c
index 48929df7673b..4cf3ef4ddec3 100644
--- linux-libre-4.19.222-gnu1/drivers/char/ipmi/ipmi_msghandler.c
+++ linux-libre-4.19.223-gnu1/drivers/char/ipmi/ipmi_msghandler.c
@@ -2863,7 +2863,7 @@ cleanup_bmc_device(struct kref *ref)
 	 * with removing the device attributes while reading a device
 	 * attribute.
 	 */
-	schedule_work(&bmc->remove_work);
+	queue_work(remove_work_wq, &bmc->remove_work);
 }
 
 /*
@@ -5085,22 +5085,27 @@ static int ipmi_init_msghandler(void)
 	if (initialized)
 		goto out;
 
-	init_srcu_struct(&ipmi_interfaces_srcu);
-
-	timer_setup(&ipmi_timer, ipmi_timeout, 0);
-	mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
-
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+	rv = init_srcu_struct(&ipmi_interfaces_srcu);
+	if (rv)
+		goto out;
 
 	remove_work_wq = create_singlethread_workqueue("ipmi-msghandler-remove-wq");
 	if (!remove_work_wq) {
 		pr_err("unable to create ipmi-msghandler-remove-wq workqueue");
 		rv = -ENOMEM;
-		goto out;
+		goto out_wq;
 	}
 
+	timer_setup(&ipmi_timer, ipmi_timeout, 0);
+	mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
+
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+
 	initialized = true;
 
+out_wq:
+	if (rv)
+		cleanup_srcu_struct(&ipmi_interfaces_srcu);
 out:
 	mutex_unlock(&ipmi_interfaces_mutex);
 	return rv;
diff --git linux-libre-4.19.222-gnu1/drivers/hid/hid-holtek-mouse.c linux-libre-4.19.223-gnu1/drivers/hid/hid-holtek-mouse.c
index 27c08ddab0e1..96db7e96fcea 100644
--- linux-libre-4.19.222-gnu1/drivers/hid/hid-holtek-mouse.c
+++ linux-libre-4.19.223-gnu1/drivers/hid/hid-holtek-mouse.c
@@ -68,8 +68,23 @@ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 static int holtek_mouse_probe(struct hid_device *hdev,
 			      const struct hid_device_id *id)
 {
+	int ret;
+
 	if (!hid_is_usb(hdev))
 		return -EINVAL;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "hid parse failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed: %d\n", ret);
+		return ret;
+	}
+
 	return 0;
 }
 
diff --git linux-libre-4.19.222-gnu1/drivers/hwmon/lm90.c linux-libre-4.19.223-gnu1/drivers/hwmon/lm90.c
index c187e557678e..30a7f7fde651 100644
--- linux-libre-4.19.222-gnu1/drivers/hwmon/lm90.c
+++ linux-libre-4.19.223-gnu1/drivers/hwmon/lm90.c
@@ -197,6 +197,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define LM90_STATUS_RHIGH	(1 << 4) /* remote high temp limit tripped */
 #define LM90_STATUS_LLOW	(1 << 5) /* local low temp limit tripped */
 #define LM90_STATUS_LHIGH	(1 << 6) /* local high temp limit tripped */
+#define LM90_STATUS_BUSY	(1 << 7) /* conversion is ongoing */
 
 #define MAX6696_STATUS2_R2THRM	(1 << 1) /* remote2 THERM limit tripped */
 #define MAX6696_STATUS2_R2OPEN	(1 << 2) /* remote2 is an open circuit */
@@ -786,7 +787,7 @@ static int lm90_update_device(struct device *dev)
 		val = lm90_read_reg(client, LM90_REG_R_STATUS);
 		if (val < 0)
 			return val;
-		data->alarms = val;	/* lower 8 bit of alarms */
+		data->alarms = val & ~LM90_STATUS_BUSY;
 
 		if (data->kind == max6696) {
 			val = lm90_select_remote_channel(client, data, 1);
@@ -1439,12 +1440,11 @@ static int lm90_detect(struct i2c_client *client,
 	if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0)
 		return -ENODEV;
 
-	if (man_id == 0x01 || man_id == 0x5C || man_id == 0x41) {
+	if (man_id == 0x01 || man_id == 0x5C || man_id == 0xA1) {
 		config2 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG2);
 		if (config2 < 0)
 			return -ENODEV;
-	} else
-		config2 = 0;		/* Make compiler happy */
+	}
 
 	if ((address == 0x4C || address == 0x4D)
 	 && man_id == 0x01) { /* National Semiconductor */
diff --git linux-libre-4.19.222-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c linux-libre-4.19.223-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c
index 47ed3ab25dc9..6e6730f036b0 100644
--- linux-libre-4.19.222-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c
+++ linux-libre-4.19.223-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c
@@ -945,7 +945,7 @@ static int qib_user_sdma_queue_pkts(const struct qib_devdata *dd,
 					       &addrlimit) ||
 			    addrlimit > type_max(typeof(pkt->addrlimit))) {
 				ret = -EINVAL;
-				goto free_pbc;
+				goto free_pkt;
 			}
 			pkt->addrlimit = addrlimit;
 
diff --git linux-libre-4.19.222-gnu1/drivers/input/touchscreen/atmel_mxt_ts.c linux-libre-4.19.223-gnu1/drivers/input/touchscreen/atmel_mxt_ts.c
index a566f35147f2..17dff05517ee 100644
--- linux-libre-4.19.222-gnu1/drivers/input/touchscreen/atmel_mxt_ts.c
+++ linux-libre-4.19.223-gnu1/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1809,7 +1809,7 @@ static int mxt_read_info_block(struct mxt_data *data)
 	if (error) {
 		dev_err(&client->dev, "Error %d parsing object table\n", error);
 		mxt_free_object_table(data);
-		goto err_free_mem;
+		return error;
 	}
 
 	data->object_table = (struct mxt_object *)(id_buf + MXT_OBJECT_START);
diff --git linux-libre-4.19.222-gnu1/drivers/net/bonding/bond_options.c linux-libre-4.19.223-gnu1/drivers/net/bonding/bond_options.c
index 80867bd8f44c..c9aa28eee191 100644
--- linux-libre-4.19.222-gnu1/drivers/net/bonding/bond_options.c
+++ linux-libre-4.19.223-gnu1/drivers/net/bonding/bond_options.c
@@ -1439,7 +1439,7 @@ static int bond_option_ad_actor_system_set(struct bonding *bond,
 		mac = (u8 *)&newval->value;
 	}
 
-	if (!is_valid_ether_addr(mac))
+	if (is_multicast_ether_addr(mac))
 		goto err;
 
 	netdev_dbg(bond->dev, "Setting ad_actor_system to %pM\n", mac);
diff --git linux-libre-4.19.222-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h linux-libre-4.19.223-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h
index 5f327659efa7..85b688f60b87 100644
--- linux-libre-4.19.222-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h
+++ linux-libre-4.19.223-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h
@@ -202,7 +202,7 @@ int qlcnic_sriov_get_vf_vport_info(struct qlcnic_adapter *,
 				   struct qlcnic_info *, u16);
 int qlcnic_sriov_cfg_vf_guest_vlan(struct qlcnic_adapter *, u16, u8);
 void qlcnic_sriov_free_vlans(struct qlcnic_adapter *);
-void qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *);
+int qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *);
 bool qlcnic_sriov_check_any_vlan(struct qlcnic_vf_info *);
 void qlcnic_sriov_del_vlan_id(struct qlcnic_sriov *,
 			      struct qlcnic_vf_info *, u16);
diff --git linux-libre-4.19.222-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c linux-libre-4.19.223-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 77e386ebff09..98275f18a87b 100644
--- linux-libre-4.19.222-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ linux-libre-4.19.223-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -433,7 +433,7 @@ static int qlcnic_sriov_set_guest_vlan_mode(struct qlcnic_adapter *adapter,
 					    struct qlcnic_cmd_args *cmd)
 {
 	struct qlcnic_sriov *sriov = adapter->ahw->sriov;
-	int i, num_vlans;
+	int i, num_vlans, ret;
 	u16 *vlans;
 
 	if (sriov->allowed_vlans)
@@ -444,7 +444,9 @@ static int qlcnic_sriov_set_guest_vlan_mode(struct qlcnic_adapter *adapter,
 	dev_info(&adapter->pdev->dev, "Number of allowed Guest VLANs = %d\n",
 		 sriov->num_allowed_vlans);
 
-	qlcnic_sriov_alloc_vlans(adapter);
+	ret = qlcnic_sriov_alloc_vlans(adapter);
+	if (ret)
+		return ret;
 
 	if (!sriov->any_vlan)
 		return 0;
@@ -2164,7 +2166,7 @@ static int qlcnic_sriov_vf_resume(struct qlcnic_adapter *adapter)
 	return err;
 }
 
-void qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *adapter)
+int qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_sriov *sriov = adapter->ahw->sriov;
 	struct qlcnic_vf_info *vf;
@@ -2174,7 +2176,11 @@ void qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *adapter)
 		vf = &sriov->vf_info[i];
 		vf->sriov_vlans = kcalloc(sriov->num_allowed_vlans,
 					  sizeof(*vf->sriov_vlans), GFP_KERNEL);
+		if (!vf->sriov_vlans)
+			return -ENOMEM;
 	}
+
+	return 0;
 }
 
 void qlcnic_sriov_free_vlans(struct qlcnic_adapter *adapter)
diff --git linux-libre-4.19.222-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c linux-libre-4.19.223-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
index 50eaafa3eaba..c9f2cd246223 100644
--- linux-libre-4.19.222-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
+++ linux-libre-4.19.223-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
@@ -598,7 +598,9 @@ static int __qlcnic_pci_sriov_enable(struct qlcnic_adapter *adapter,
 	if (err)
 		goto del_flr_queue;
 
-	qlcnic_sriov_alloc_vlans(adapter);
+	err = qlcnic_sriov_alloc_vlans(adapter);
+	if (err)
+		goto del_flr_queue;
 
 	return err;
 
diff --git linux-libre-4.19.222-gnu1/drivers/net/ethernet/sfc/falcon/rx.c linux-libre-4.19.223-gnu1/drivers/net/ethernet/sfc/falcon/rx.c
index 02456ed13a7d..5b93a3af4575 100644
--- linux-libre-4.19.222-gnu1/drivers/net/ethernet/sfc/falcon/rx.c
+++ linux-libre-4.19.223-gnu1/drivers/net/ethernet/sfc/falcon/rx.c
@@ -732,7 +732,10 @@ static void ef4_init_rx_recycle_ring(struct ef4_nic *efx,
 					    efx->rx_bufs_per_page);
 	rx_queue->page_ring = kcalloc(page_ring_size,
 				      sizeof(*rx_queue->page_ring), GFP_KERNEL);
-	rx_queue->page_ptr_mask = page_ring_size - 1;
+	if (!rx_queue->page_ring)
+		rx_queue->page_ptr_mask = 0;
+	else
+		rx_queue->page_ptr_mask = page_ring_size - 1;
 }
 
 void ef4_init_rx_queue(struct ef4_rx_queue *rx_queue)
diff --git linux-libre-4.19.222-gnu1/drivers/net/ethernet/smsc/smc911x.c linux-libre-4.19.223-gnu1/drivers/net/ethernet/smsc/smc911x.c
index f97b35430c84..ac1ad00e2fc5 100644
--- linux-libre-4.19.222-gnu1/drivers/net/ethernet/smsc/smc911x.c
+++ linux-libre-4.19.223-gnu1/drivers/net/ethernet/smsc/smc911x.c
@@ -2080,6 +2080,11 @@ static int smc911x_drv_probe(struct platform_device *pdev)
 
 	ndev->dma = (unsigned char)-1;
 	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq < 0) {
+		ret = ndev->irq;
+		goto release_both;
+	}
+
 	lp = netdev_priv(ndev);
 	lp->netdev = ndev;
 #ifdef SMC_DYNAMIC_BUS_CONFIG
diff --git linux-libre-4.19.222-gnu1/drivers/net/fjes/fjes_main.c linux-libre-4.19.223-gnu1/drivers/net/fjes/fjes_main.c
index 778d3729f460..89b3bc389f46 100644
--- linux-libre-4.19.222-gnu1/drivers/net/fjes/fjes_main.c
+++ linux-libre-4.19.223-gnu1/drivers/net/fjes/fjes_main.c
@@ -1284,6 +1284,11 @@ static int fjes_probe(struct platform_device *plat_dev)
 	hw->hw_res.start = res->start;
 	hw->hw_res.size = resource_size(res);
 	hw->hw_res.irq = platform_get_irq(plat_dev, 0);
+	if (hw->hw_res.irq < 0) {
+		err = hw->hw_res.irq;
+		goto err_free_control_wq;
+	}
+
 	err = fjes_hw_init(&adapter->hw);
 	if (err)
 		goto err_free_control_wq;
diff --git linux-libre-4.19.222-gnu1/drivers/net/hamradio/mkiss.c linux-libre-4.19.223-gnu1/drivers/net/hamradio/mkiss.c
index 940aa7a19f50..ba0ca85e3d76 100644
--- linux-libre-4.19.222-gnu1/drivers/net/hamradio/mkiss.c
+++ linux-libre-4.19.223-gnu1/drivers/net/hamradio/mkiss.c
@@ -803,13 +803,14 @@ static void mkiss_close(struct tty_struct *tty)
 	 */
 	netif_stop_queue(ax->dev);
 
-	/* Free all AX25 frame buffers. */
+	unregister_netdev(ax->dev);
+
+	/* Free all AX25 frame buffers after unreg. */
 	kfree(ax->rbuff);
 	kfree(ax->xbuff);
 
 	ax->tty = NULL;
 
-	unregister_netdev(ax->dev);
 	free_netdev(ax->dev);
 }
 
diff --git linux-libre-4.19.222-gnu1/drivers/net/usb/lan78xx.c linux-libre-4.19.223-gnu1/drivers/net/usb/lan78xx.c
index f438be83d259..a44968d5cac4 100644
--- linux-libre-4.19.222-gnu1/drivers/net/usb/lan78xx.c
+++ linux-libre-4.19.223-gnu1/drivers/net/usb/lan78xx.c
@@ -75,6 +75,8 @@
 #define LAN7801_USB_PRODUCT_ID		(0x7801)
 #define LAN78XX_EEPROM_MAGIC		(0x78A5)
 #define LAN78XX_OTP_MAGIC		(0x78F3)
+#define AT29M2AF_USB_VENDOR_ID		(0x07C9)
+#define AT29M2AF_USB_PRODUCT_ID	(0x0012)
 
 #define	MII_READ			1
 #define	MII_WRITE			0
@@ -4170,6 +4172,10 @@ static const struct usb_device_id products[] = {
 	/* LAN7801 USB Gigabit Ethernet Device */
 	USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7801_USB_PRODUCT_ID),
 	},
+	{
+	/* ATM2-AF USB Gigabit Ethernet Device */
+	USB_DEVICE(AT29M2AF_USB_VENDOR_ID, AT29M2AF_USB_PRODUCT_ID),
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, products);
diff --git linux-libre-4.19.222-gnu1/drivers/pinctrl/stm32/pinctrl-stm32.c linux-libre-4.19.223-gnu1/drivers/pinctrl/stm32/pinctrl-stm32.c
index 4e17728f2937..08f1688dfeb2 100644
--- linux-libre-4.19.222-gnu1/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ linux-libre-4.19.223-gnu1/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -1011,10 +1011,10 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
 		bank_nr = args.args[1] / STM32_GPIO_PINS_PER_BANK;
 		bank->gpio_chip.base = args.args[1];
 
-		npins = args.args[2];
-		while (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3,
-							 ++i, &args))
-			npins += args.args[2];
+		/* get the last defined gpio line (offset + nb of pins) */
+		npins = args.args[0] + args.args[2];
+		while (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, ++i, &args))
+			npins = max(npins, (int)(args.args[0] + args.args[2]));
 	} else {
 		bank_nr = pctl->nbanks;
 		bank->gpio_chip.base = bank_nr * STM32_GPIO_PINS_PER_BANK;
diff --git linux-libre-4.19.222-gnu1/drivers/spi/spi-armada-3700.c linux-libre-4.19.223-gnu1/drivers/spi/spi-armada-3700.c
index 7dcb14d303eb..d8715954f4e0 100644
--- linux-libre-4.19.222-gnu1/drivers/spi/spi-armada-3700.c
+++ linux-libre-4.19.223-gnu1/drivers/spi/spi-armada-3700.c
@@ -912,7 +912,7 @@ static int a3700_spi_probe(struct platform_device *pdev)
 	return 0;
 
 error_clk:
-	clk_disable_unprepare(spi->clk);
+	clk_unprepare(spi->clk);
 error:
 	spi_master_put(master);
 out:
diff --git linux-libre-4.19.222-gnu1/drivers/usb/gadget/function/u_ether.c linux-libre-4.19.223-gnu1/drivers/usb/gadget/function/u_ether.c
index d7a12161e553..1b3e674e6330 100644
--- linux-libre-4.19.222-gnu1/drivers/usb/gadget/function/u_ether.c
+++ linux-libre-4.19.223-gnu1/drivers/usb/gadget/function/u_ether.c
@@ -860,19 +860,23 @@ int gether_register_netdev(struct net_device *net)
 {
 	struct eth_dev *dev;
 	struct usb_gadget *g;
-	struct sockaddr sa;
 	int status;
 
 	if (!net->dev.parent)
 		return -EINVAL;
 	dev = netdev_priv(net);
 	g = dev->gadget;
+
+	memcpy(net->dev_addr, dev->dev_mac, ETH_ALEN);
+	net->addr_assign_type = NET_ADDR_RANDOM;
+
 	status = register_netdev(net);
 	if (status < 0) {
 		dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
 		return status;
 	} else {
 		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
+		INFO(dev, "MAC %pM\n", dev->dev_mac);
 
 		/* two kinds of host-initiated state changes:
 		 *  - iff DATA transfer is active, carrier is "on"
@@ -880,15 +884,6 @@ int gether_register_netdev(struct net_device *net)
 		 */
 		netif_carrier_off(net);
 	}
-	sa.sa_family = net->type;
-	memcpy(sa.sa_data, dev->dev_mac, ETH_ALEN);
-	rtnl_lock();
-	status = dev_set_mac_address(net, &sa);
-	rtnl_unlock();
-	if (status)
-		pr_warn("cannot set self ethernet address: %d\n", status);
-	else
-		INFO(dev, "MAC %pM\n", dev->dev_mac);
 
 	return status;
 }
diff --git linux-libre-4.19.222-gnu1/fs/f2fs/xattr.c linux-libre-4.19.223-gnu1/fs/f2fs/xattr.c
index 201e9da1692a..64352d2833e2 100644
--- linux-libre-4.19.222-gnu1/fs/f2fs/xattr.c
+++ linux-libre-4.19.223-gnu1/fs/f2fs/xattr.c
@@ -658,8 +658,15 @@ static int __f2fs_setxattr(struct inode *inode, int index,
 	}
 
 	last = here;
-	while (!IS_XATTR_LAST_ENTRY(last))
+	while (!IS_XATTR_LAST_ENTRY(last)) {
+		if ((void *)(last) + sizeof(__u32) > last_base_addr ||
+			(void *)XATTR_NEXT_ENTRY(last) > last_base_addr) {
+			set_sbi_flag(F2FS_I_SB(inode), SBI_NEED_FSCK);
+			error = -EFSCORRUPTED;
+			goto exit;
+		}
 		last = XATTR_NEXT_ENTRY(last);
+	}
 
 	newsize = XATTR_ALIGN(sizeof(struct f2fs_xattr_entry) + len + size);
 
diff --git linux-libre-4.19.222-gnu1/include/linux/virtio_net.h linux-libre-4.19.223-gnu1/include/linux/virtio_net.h
index e7330a9a7d7d..faee73c084d4 100644
--- linux-libre-4.19.222-gnu1/include/linux/virtio_net.h
+++ linux-libre-4.19.223-gnu1/include/linux/virtio_net.h
@@ -7,9 +7,27 @@
 #include <uapi/linux/udp.h>
 #include <uapi/linux/virtio_net.h>
 
+static inline bool virtio_net_hdr_match_proto(__be16 protocol, __u8 gso_type)
+{
+	switch (gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
+	case VIRTIO_NET_HDR_GSO_TCPV4:
+		return protocol == cpu_to_be16(ETH_P_IP);
+	case VIRTIO_NET_HDR_GSO_TCPV6:
+		return protocol == cpu_to_be16(ETH_P_IPV6);
+	case VIRTIO_NET_HDR_GSO_UDP:
+		return protocol == cpu_to_be16(ETH_P_IP) ||
+		       protocol == cpu_to_be16(ETH_P_IPV6);
+	default:
+		return false;
+	}
+}
+
 static inline int virtio_net_hdr_set_proto(struct sk_buff *skb,
 					   const struct virtio_net_hdr *hdr)
 {
+	if (skb->protocol)
+		return 0;
+
 	switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
 	case VIRTIO_NET_HDR_GSO_TCPV4:
 	case VIRTIO_NET_HDR_GSO_UDP:
@@ -88,9 +106,12 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb,
 			if (!skb->protocol) {
 				__be16 protocol = dev_parse_header_protocol(skb);
 
-				virtio_net_hdr_set_proto(skb, hdr);
-				if (protocol && protocol != skb->protocol)
+				if (!protocol)
+					virtio_net_hdr_set_proto(skb, hdr);
+				else if (!virtio_net_hdr_match_proto(protocol, hdr->gso_type))
 					return -EINVAL;
+				else
+					skb->protocol = protocol;
 			}
 retry:
 			if (!skb_flow_dissect_flow_keys_basic(skb, &keys,
diff --git linux-libre-4.19.222-gnu1/net/ax25/af_ax25.c linux-libre-4.19.223-gnu1/net/ax25/af_ax25.c
index a45db78eaf00..567fdfd9678d 100644
--- linux-libre-4.19.222-gnu1/net/ax25/af_ax25.c
+++ linux-libre-4.19.223-gnu1/net/ax25/af_ax25.c
@@ -88,8 +88,10 @@ static void ax25_kill_by_device(struct net_device *dev)
 again:
 	ax25_for_each(s, &ax25_list) {
 		if (s->ax25_dev == ax25_dev) {
-			s->ax25_dev = NULL;
 			spin_unlock_bh(&ax25_list_lock);
+			lock_sock(s->sk);
+			s->ax25_dev = NULL;
+			release_sock(s->sk);
 			ax25_disconnect(s, ENETUNREACH);
 			spin_lock_bh(&ax25_list_lock);
 
diff --git linux-libre-4.19.222-gnu1/net/netfilter/nfnetlink_log.c linux-libre-4.19.223-gnu1/net/netfilter/nfnetlink_log.c
index 25298b3eb854..17ca9a681d47 100644
--- linux-libre-4.19.222-gnu1/net/netfilter/nfnetlink_log.c
+++ linux-libre-4.19.223-gnu1/net/netfilter/nfnetlink_log.c
@@ -509,7 +509,8 @@ __build_packet_message(struct nfnl_log_net *log,
 		goto nla_put_failure;
 
 	if (indev && skb->dev &&
-	    skb->mac_header != skb->network_header) {
+	    skb_mac_header_was_set(skb) &&
+	    skb_mac_header_len(skb) != 0) {
 		struct nfulnl_msg_packet_hw phw;
 		int len;
 
diff --git linux-libre-4.19.222-gnu1/net/netfilter/nfnetlink_queue.c linux-libre-4.19.223-gnu1/net/netfilter/nfnetlink_queue.c
index eb5a052d3b25..8955431f2ab2 100644
--- linux-libre-4.19.222-gnu1/net/netfilter/nfnetlink_queue.c
+++ linux-libre-4.19.223-gnu1/net/netfilter/nfnetlink_queue.c
@@ -566,7 +566,8 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
 		goto nla_put_failure;
 
 	if (indev && entskb->dev &&
-	    skb_mac_header_was_set(entskb)) {
+	    skb_mac_header_was_set(entskb) &&
+	    skb_mac_header_len(entskb) != 0) {
 		struct nfqnl_msg_packet_hw phw;
 		int len;
 
diff --git linux-libre-4.19.222-gnu1/net/phonet/pep.c linux-libre-4.19.223-gnu1/net/phonet/pep.c
index db3473540303..c0b4cc1e108b 100644
--- linux-libre-4.19.222-gnu1/net/phonet/pep.c
+++ linux-libre-4.19.223-gnu1/net/phonet/pep.c
@@ -959,6 +959,8 @@ static int pep_ioctl(struct sock *sk, int cmd, unsigned long arg)
 			ret =  -EBUSY;
 		else if (sk->sk_state == TCP_ESTABLISHED)
 			ret = -EISCONN;
+		else if (!pn->pn_sk.sobject)
+			ret = -EADDRNOTAVAIL;
 		else
 			ret = pep_sock_enable(sk, NULL, 0);
 		release_sock(sk);
diff --git linux-libre-4.19.222-gnu1/sound/core/jack.c linux-libre-4.19.223-gnu1/sound/core/jack.c
index 84c2a17c56ee..847a8f3fd06e 100644
--- linux-libre-4.19.222-gnu1/sound/core/jack.c
+++ linux-libre-4.19.223-gnu1/sound/core/jack.c
@@ -234,6 +234,10 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 		return -ENOMEM;
 
 	jack->id = kstrdup(id, GFP_KERNEL);
+	if (jack->id == NULL) {
+		kfree(jack);
+		return -ENOMEM;
+	}
 
 	/* don't creat input device for phantom jack */
 	if (!phantom_jack) {
diff --git linux-libre-4.19.222-gnu1/sound/drivers/opl3/opl3_midi.c linux-libre-4.19.223-gnu1/sound/drivers/opl3/opl3_midi.c
index a33cb744e96c..4e77b1dcacc8 100644
--- linux-libre-4.19.222-gnu1/sound/drivers/opl3/opl3_midi.c
+++ linux-libre-4.19.223-gnu1/sound/drivers/opl3/opl3_midi.c
@@ -412,7 +412,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan)
 	}
 	if (instr_4op) {
 		vp2 = &opl3->voices[voice + 3];
-		if (vp->state > 0) {
+		if (vp2->state > 0) {
 			opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK +
 					       voice_offset + 3);
 			reg_val = vp->keyon_reg & ~OPL3_KEYON_BIT;
