diff --git linux-libre-4.4.296-gnu1/Documentation/networking/bonding.txt linux-libre-4.4.297-gnu1/Documentation/networking/bonding.txt
index 334b49ef02d1..5a6e70483ced 100644
--- linux-libre-4.4.296-gnu1/Documentation/networking/bonding.txt
+++ linux-libre-4.4.297-gnu1/Documentation/networking/bonding.txt
@@ -191,11 +191,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
diff --git linux-libre-4.4.296-gnu1/Makefile linux-libre-4.4.297-gnu1/Makefile
index 1d5f4e382b5e..0c51634279b4 100644
--- linux-libre-4.4.296-gnu1/Makefile
+++ linux-libre-4.4.297-gnu1/Makefile
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 4
-SUBLEVEL = 296
+SUBLEVEL = 297
 EXTRAVERSION = -gnu1
 NAME = Blurry Fish Butt
 
diff --git linux-libre-4.4.296-gnu1/arch/arm/kernel/entry-armv.S linux-libre-4.4.297-gnu1/arch/arm/kernel/entry-armv.S
index 3ce377f7251f..618ceb6fe674 100644
--- linux-libre-4.4.296-gnu1/arch/arm/kernel/entry-armv.S
+++ linux-libre-4.4.297-gnu1/arch/arm/kernel/entry-armv.S
@@ -625,11 +625,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -638,7 +636,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 
diff --git linux-libre-4.4.296-gnu1/drivers/block/xen-blkfront.c linux-libre-4.4.297-gnu1/drivers/block/xen-blkfront.c
index 1e44b7880200..ae2c47e99c88 100644
--- linux-libre-4.4.296-gnu1/drivers/block/xen-blkfront.c
+++ linux-libre-4.4.297-gnu1/drivers/block/xen-blkfront.c
@@ -493,8 +493,6 @@ static int blkif_queue_discard_req(struct request *req)
 	else
 		ring_req->u.discard.flag = 0;
 
-	info->ring.req_prod_pvt++;
-
 	/* Copy the request to the ring page. */
 	*final_ring_req = *ring_req;
 	info->shadow[id].inflight = true;
@@ -711,8 +709,6 @@ static int blkif_queue_rw_req(struct request *req)
 	if (setup.segments)
 		kunmap_atomic(setup.segments);
 
-	info->ring.req_prod_pvt++;
-
 	/* Copy request(s) to the ring page. */
 	*final_ring_req = *ring_req;
 	info->shadow[id].inflight = true;
diff --git linux-libre-4.4.296-gnu1/drivers/hid/hid-holtek-mouse.c linux-libre-4.4.297-gnu1/drivers/hid/hid-holtek-mouse.c
index 27c08ddab0e1..96db7e96fcea 100644
--- linux-libre-4.4.296-gnu1/drivers/hid/hid-holtek-mouse.c
+++ linux-libre-4.4.297-gnu1/drivers/hid/hid-holtek-mouse.c
@@ -68,8 +68,23 @@ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 static int holtek_mouse_probe(struct hid_device *hdev,
 			      const struct hid_device_id *id)
 {
+	int ret;
+
 	if (!hid_is_usb(hdev))
 		return -EINVAL;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "hid parse failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed: %d\n", ret);
+		return ret;
+	}
+
 	return 0;
 }
 
diff --git linux-libre-4.4.296-gnu1/drivers/hwmon/lm90.c linux-libre-4.4.297-gnu1/drivers/hwmon/lm90.c
index c9ff08dbe10c..420f34127262 100644
--- linux-libre-4.4.296-gnu1/drivers/hwmon/lm90.c
+++ linux-libre-4.4.297-gnu1/drivers/hwmon/lm90.c
@@ -1209,12 +1209,11 @@ static int lm90_detect(struct i2c_client *client,
 	if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0)
 		return -ENODEV;
 
-	if (man_id == 0x01 || man_id == 0x5C || man_id == 0x41) {
+	if (man_id == 0x01 || man_id == 0x5C || man_id == 0xA1) {
 		config2 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG2);
 		if (config2 < 0)
 			return -ENODEV;
-	} else
-		config2 = 0;		/* Make compiler happy */
+	}
 
 	if ((address == 0x4C || address == 0x4D)
 	 && man_id == 0x01) { /* National Semiconductor */
diff --git linux-libre-4.4.296-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c linux-libre-4.4.297-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c
index 0dc15f95e762..2d0b992579d6 100644
--- linux-libre-4.4.296-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c
+++ linux-libre-4.4.297-gnu1/drivers/infiniband/hw/qib/qib_user_sdma.c
@@ -946,7 +946,7 @@ static int qib_user_sdma_queue_pkts(const struct qib_devdata *dd,
 					       &addrlimit) ||
 			    addrlimit > type_max(typeof(pkt->addrlimit))) {
 				ret = -EINVAL;
-				goto free_pbc;
+				goto free_pkt;
 			}
 			pkt->addrlimit = addrlimit;
 
diff --git linux-libre-4.4.296-gnu1/drivers/net/bonding/bond_options.c linux-libre-4.4.297-gnu1/drivers/net/bonding/bond_options.c
index 1022e80aaf97..1d95a83d2bae 100644
--- linux-libre-4.4.296-gnu1/drivers/net/bonding/bond_options.c
+++ linux-libre-4.4.297-gnu1/drivers/net/bonding/bond_options.c
@@ -1407,7 +1407,7 @@ static int bond_option_ad_actor_system_set(struct bonding *bond,
 		mac = (u8 *)&newval->value;
 	}
 
-	if (!is_valid_ether_addr(mac))
+	if (is_multicast_ether_addr(mac))
 		goto err;
 
 	netdev_info(bond->dev, "Setting ad_actor_system to %pM\n", mac);
diff --git linux-libre-4.4.296-gnu1/drivers/net/can/usb/kvaser_usb.c linux-libre-4.4.297-gnu1/drivers/net/can/usb/kvaser_usb.c
index 9991ee93735a..81abb30d9ec0 100644
--- linux-libre-4.4.296-gnu1/drivers/net/can/usb/kvaser_usb.c
+++ linux-libre-4.4.297-gnu1/drivers/net/can/usb/kvaser_usb.c
@@ -31,7 +31,10 @@
 #define USB_SEND_TIMEOUT		1000 /* msecs */
 #define USB_RECV_TIMEOUT		1000 /* msecs */
 #define RX_BUFFER_SIZE			3072
-#define CAN_USB_CLOCK			8000000
+#define KVASER_USB_CAN_CLOCK_8MHZ	8000000
+#define KVASER_USB_CAN_CLOCK_16MHZ	16000000
+#define KVASER_USB_CAN_CLOCK_24MHZ	24000000
+#define KVASER_USB_CAN_CLOCK_32MHZ	32000000
 #define MAX_NET_DEVICES			3
 #define MAX_USBCAN_NET_DEVICES		2
 
@@ -139,6 +142,12 @@ static inline bool kvaser_is_usbcan(const struct usb_device_id *id)
 #define CMD_LEAF_USB_THROTTLE		77
 #define CMD_LEAF_LOG_MESSAGE		106
 
+/* Leaf frequency options */
+#define KVASER_USB_LEAF_SWOPTION_FREQ_MASK 0x60
+#define KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK 0
+#define KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK BIT(5)
+#define KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK BIT(6)
+
 /* error factors */
 #define M16C_EF_ACKE			BIT(0)
 #define M16C_EF_CRCE			BIT(1)
@@ -469,6 +478,8 @@ struct kvaser_usb {
 	bool rxinitdone;
 	void *rxbuf[MAX_RX_URBS];
 	dma_addr_t rxbuf_dma[MAX_RX_URBS];
+
+	struct can_clock clock;
 };
 
 struct kvaser_usb_net_priv {
@@ -646,6 +657,27 @@ static int kvaser_usb_send_simple_msg(const struct kvaser_usb *dev,
 	return rc;
 }
 
+static void kvaser_usb_get_software_info_leaf(struct kvaser_usb *dev,
+					      const struct leaf_msg_softinfo *softinfo)
+{
+	u32 sw_options = le32_to_cpu(softinfo->sw_options);
+
+	dev->fw_version = le32_to_cpu(softinfo->fw_version);
+	dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);
+
+	switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) {
+	case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK:
+		dev->clock.freq = KVASER_USB_CAN_CLOCK_16MHZ;
+		break;
+	case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK:
+		dev->clock.freq = KVASER_USB_CAN_CLOCK_24MHZ;
+		break;
+	case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK:
+		dev->clock.freq = KVASER_USB_CAN_CLOCK_32MHZ;
+		break;
+	}
+}
+
 static int kvaser_usb_get_software_info(struct kvaser_usb *dev)
 {
 	struct kvaser_msg msg;
@@ -661,14 +693,13 @@ static int kvaser_usb_get_software_info(struct kvaser_usb *dev)
 
 	switch (dev->family) {
 	case KVASER_LEAF:
-		dev->fw_version = le32_to_cpu(msg.u.leaf.softinfo.fw_version);
-		dev->max_tx_urbs =
-			le16_to_cpu(msg.u.leaf.softinfo.max_outstanding_tx);
+		kvaser_usb_get_software_info_leaf(dev, &msg.u.leaf.softinfo);
 		break;
 	case KVASER_USBCAN:
 		dev->fw_version = le32_to_cpu(msg.u.usbcan.softinfo.fw_version);
 		dev->max_tx_urbs =
 			le16_to_cpu(msg.u.usbcan.softinfo.max_outstanding_tx);
+		dev->clock.freq = KVASER_USB_CAN_CLOCK_8MHZ;
 		break;
 	}
 
@@ -1925,7 +1956,7 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
 	kvaser_usb_reset_tx_urb_contexts(priv);
 
 	priv->can.state = CAN_STATE_STOPPED;
-	priv->can.clock.freq = CAN_USB_CLOCK;
+	priv->can.clock.freq = dev->clock.freq;
 	priv->can.bittiming_const = &kvaser_usb_bittiming_const;
 	priv->can.do_set_bittiming = kvaser_usb_set_bittiming;
 	priv->can.do_set_mode = kvaser_usb_set_mode;
diff --git linux-libre-4.4.296-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h linux-libre-4.4.297-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h
index 017d8c2c8285..aab2db76d9ed 100644
--- linux-libre-4.4.296-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h
+++ linux-libre-4.4.297-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h
@@ -201,7 +201,7 @@ int qlcnic_sriov_get_vf_vport_info(struct qlcnic_adapter *,
 				   struct qlcnic_info *, u16);
 int qlcnic_sriov_cfg_vf_guest_vlan(struct qlcnic_adapter *, u16, u8);
 void qlcnic_sriov_free_vlans(struct qlcnic_adapter *);
-void qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *);
+int qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *);
 bool qlcnic_sriov_check_any_vlan(struct qlcnic_vf_info *);
 void qlcnic_sriov_del_vlan_id(struct qlcnic_sriov *,
 			      struct qlcnic_vf_info *, u16);
diff --git linux-libre-4.4.296-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c linux-libre-4.4.297-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index ffa6885acfc8..03e24fcf87a8 100644
--- linux-libre-4.4.296-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ linux-libre-4.4.297-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -427,7 +427,7 @@ static int qlcnic_sriov_set_guest_vlan_mode(struct qlcnic_adapter *adapter,
 					    struct qlcnic_cmd_args *cmd)
 {
 	struct qlcnic_sriov *sriov = adapter->ahw->sriov;
-	int i, num_vlans;
+	int i, num_vlans, ret;
 	u16 *vlans;
 
 	if (sriov->allowed_vlans)
@@ -438,7 +438,9 @@ static int qlcnic_sriov_set_guest_vlan_mode(struct qlcnic_adapter *adapter,
 	dev_info(&adapter->pdev->dev, "Number of allowed Guest VLANs = %d\n",
 		 sriov->num_allowed_vlans);
 
-	qlcnic_sriov_alloc_vlans(adapter);
+	ret = qlcnic_sriov_alloc_vlans(adapter);
+	if (ret)
+		return ret;
 
 	if (!sriov->any_vlan)
 		return 0;
@@ -2147,7 +2149,7 @@ static int qlcnic_sriov_vf_resume(struct qlcnic_adapter *adapter)
 	return err;
 }
 
-void qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *adapter)
+int qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_sriov *sriov = adapter->ahw->sriov;
 	struct qlcnic_vf_info *vf;
@@ -2157,7 +2159,11 @@ void qlcnic_sriov_alloc_vlans(struct qlcnic_adapter *adapter)
 		vf = &sriov->vf_info[i];
 		vf->sriov_vlans = kcalloc(sriov->num_allowed_vlans,
 					  sizeof(*vf->sriov_vlans), GFP_KERNEL);
+		if (!vf->sriov_vlans)
+			return -ENOMEM;
 	}
+
+	return 0;
 }
 
 void qlcnic_sriov_free_vlans(struct qlcnic_adapter *adapter)
diff --git linux-libre-4.4.296-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c linux-libre-4.4.297-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
index afd687e5e779..238a0e58342f 100644
--- linux-libre-4.4.296-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
+++ linux-libre-4.4.297-gnu1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
@@ -598,7 +598,9 @@ static int __qlcnic_pci_sriov_enable(struct qlcnic_adapter *adapter,
 	if (err)
 		goto del_flr_queue;
 
-	qlcnic_sriov_alloc_vlans(adapter);
+	err = qlcnic_sriov_alloc_vlans(adapter);
+	if (err)
+		goto del_flr_queue;
 
 	return err;
 
diff --git linux-libre-4.4.296-gnu1/drivers/net/ethernet/smsc/smc911x.c linux-libre-4.4.297-gnu1/drivers/net/ethernet/smsc/smc911x.c
index 0be9c74238fd..092267d8a86d 100644
--- linux-libre-4.4.296-gnu1/drivers/net/ethernet/smsc/smc911x.c
+++ linux-libre-4.4.297-gnu1/drivers/net/ethernet/smsc/smc911x.c
@@ -2057,6 +2057,11 @@ static int smc911x_drv_probe(struct platform_device *pdev)
 
 	ndev->dma = (unsigned char)-1;
 	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq < 0) {
+		ret = ndev->irq;
+		goto release_both;
+	}
+
 	lp = netdev_priv(ndev);
 	lp->netdev = ndev;
 #ifdef SMC_DYNAMIC_BUS_CONFIG
diff --git linux-libre-4.4.296-gnu1/drivers/net/hamradio/mkiss.c linux-libre-4.4.297-gnu1/drivers/net/hamradio/mkiss.c
index 078eb110381c..8249da1db53d 100644
--- linux-libre-4.4.296-gnu1/drivers/net/hamradio/mkiss.c
+++ linux-libre-4.4.297-gnu1/drivers/net/hamradio/mkiss.c
@@ -803,13 +803,14 @@ static void mkiss_close(struct tty_struct *tty)
 	 */
 	netif_stop_queue(ax->dev);
 
-	/* Free all AX25 frame buffers. */
+	unregister_netdev(ax->dev);
+
+	/* Free all AX25 frame buffers after unreg. */
 	kfree(ax->rbuff);
 	kfree(ax->xbuff);
 
 	ax->tty = NULL;
 
-	unregister_netdev(ax->dev);
 	free_netdev(ax->dev);
 }
 
diff --git linux-libre-4.4.296-gnu1/drivers/net/usb/lan78xx.c linux-libre-4.4.297-gnu1/drivers/net/usb/lan78xx.c
index ca3c7a4402a1..08c5c68057da 100644
--- linux-libre-4.4.296-gnu1/drivers/net/usb/lan78xx.c
+++ linux-libre-4.4.297-gnu1/drivers/net/usb/lan78xx.c
@@ -66,6 +66,8 @@
 #define LAN7850_USB_PRODUCT_ID		(0x7850)
 #define LAN78XX_EEPROM_MAGIC		(0x78A5)
 #define LAN78XX_OTP_MAGIC		(0x78F3)
+#define AT29M2AF_USB_VENDOR_ID		(0x07C9)
+#define AT29M2AF_USB_PRODUCT_ID	(0x0012)
 
 #define	MII_READ			1
 #define	MII_WRITE			0
@@ -3334,6 +3336,10 @@ static const struct usb_device_id products[] = {
 	/* LAN7850 USB Gigabit Ethernet Device */
 	USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7850_USB_PRODUCT_ID),
 	},
+	{
+	/* ATM2-AF USB Gigabit Ethernet Device */
+	USB_DEVICE(AT29M2AF_USB_VENDOR_ID, AT29M2AF_USB_PRODUCT_ID),
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, products);
diff --git linux-libre-4.4.296-gnu1/net/ax25/af_ax25.c linux-libre-4.4.297-gnu1/net/ax25/af_ax25.c
index 64fede18aa33..f4c8567e91b3 100644
--- linux-libre-4.4.296-gnu1/net/ax25/af_ax25.c
+++ linux-libre-4.4.297-gnu1/net/ax25/af_ax25.c
@@ -88,8 +88,10 @@ static void ax25_kill_by_device(struct net_device *dev)
 again:
 	ax25_for_each(s, &ax25_list) {
 		if (s->ax25_dev == ax25_dev) {
-			s->ax25_dev = NULL;
 			spin_unlock_bh(&ax25_list_lock);
+			lock_sock(s->sk);
+			s->ax25_dev = NULL;
+			release_sock(s->sk);
 			ax25_disconnect(s, ENETUNREACH);
 			spin_lock_bh(&ax25_list_lock);
 
diff --git linux-libre-4.4.296-gnu1/net/phonet/pep.c linux-libre-4.4.297-gnu1/net/phonet/pep.c
index f6aa532bcbf6..1e7945df3992 100644
--- linux-libre-4.4.296-gnu1/net/phonet/pep.c
+++ linux-libre-4.4.297-gnu1/net/phonet/pep.c
@@ -956,6 +956,8 @@ static int pep_ioctl(struct sock *sk, int cmd, unsigned long arg)
 			ret =  -EBUSY;
 		else if (sk->sk_state == TCP_ESTABLISHED)
 			ret = -EISCONN;
+		else if (!pn->pn_sk.sobject)
+			ret = -EADDRNOTAVAIL;
 		else
 			ret = pep_sock_enable(sk, NULL, 0);
 		release_sock(sk);
diff --git linux-libre-4.4.296-gnu1/sound/core/jack.c linux-libre-4.4.297-gnu1/sound/core/jack.c
index 7237acbdcbbc..fcc972fbe8ff 100644
--- linux-libre-4.4.296-gnu1/sound/core/jack.c
+++ linux-libre-4.4.297-gnu1/sound/core/jack.c
@@ -227,6 +227,10 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 		return -ENOMEM;
 
 	jack->id = kstrdup(id, GFP_KERNEL);
+	if (jack->id == NULL) {
+		kfree(jack);
+		return -ENOMEM;
+	}
 
 	/* don't creat input device for phantom jack */
 	if (!phantom_jack) {
diff --git linux-libre-4.4.296-gnu1/sound/drivers/opl3/opl3_midi.c linux-libre-4.4.297-gnu1/sound/drivers/opl3/opl3_midi.c
index 7821b07415a7..ff67c4b67e26 100644
--- linux-libre-4.4.296-gnu1/sound/drivers/opl3/opl3_midi.c
+++ linux-libre-4.4.297-gnu1/sound/drivers/opl3/opl3_midi.c
@@ -415,7 +415,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan)
 	}
 	if (instr_4op) {
 		vp2 = &opl3->voices[voice + 3];
-		if (vp->state > 0) {
+		if (vp2->state > 0) {
 			opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK +
 					       voice_offset + 3);
 			reg_val = vp->keyon_reg & ~OPL3_KEYON_BIT;
