diff --git linux-libre-6.1.132-gnu/Makefile linux-libre-6.1.133-gnu/Makefile
index 1058c9352869..1e2ee6f6dd49 100644
--- linux-libre-6.1.132-gnu/Makefile
+++ linux-libre-6.1.133-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 1
-SUBLEVEL = 132
+SUBLEVEL = 133
 EXTRAVERSION = -gnu
 NAME = Curry Ramen
 
diff --git linux-libre-6.1.132-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi linux-libre-6.1.133-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 7c17b91f0965..dc170a68c42f 100644
--- linux-libre-6.1.132-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ linux-libre-6.1.133-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -101,6 +101,11 @@
 		};
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -220,10 +225,6 @@
 	status = "disabled";
 };
 
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -511,7 +512,6 @@
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
diff --git linux-libre-6.1.132-gnu/arch/arm/mm/fault.c linux-libre-6.1.133-gnu/arch/arm/mm/fault.c
index b0db85310331..16a7765511f8 100644
--- linux-libre-6.1.132-gnu/arch/arm/mm/fault.c
+++ linux-libre-6.1.133-gnu/arch/arm/mm/fault.c
@@ -27,6 +27,13 @@
 
 #ifdef CONFIG_MMU
 
+bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
+{
+	unsigned long addr = (unsigned long)unsafe_src;
+
+	return addr >= TASK_SIZE && ULONG_MAX - addr >= size;
+}
+
 /*
  * This is useful to dump out the page tables associated with
  * 'addr' in mm 'mm'.
@@ -552,6 +559,7 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
 		return;
 
+	pr_alert("8<--- cut here ---\n");
 	pr_alert("Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
 		inf->name, ifsr, addr);
 
diff --git linux-libre-6.1.132-gnu/drivers/counter/microchip-tcb-capture.c linux-libre-6.1.133-gnu/drivers/counter/microchip-tcb-capture.c
index c7af13aca36c..2f631729a870 100644
--- linux-libre-6.1.132-gnu/drivers/counter/microchip-tcb-capture.c
+++ linux-libre-6.1.133-gnu/drivers/counter/microchip-tcb-capture.c
@@ -369,6 +369,25 @@ static int mchp_tc_probe(struct platform_device *pdev)
 			channel);
 	}
 
+	/* Disable Quadrature Decoder and position measure */
+	ret = regmap_update_bits(regmap, ATMEL_TC_BMR, ATMEL_TC_QDEN | ATMEL_TC_POSEN, 0);
+	if (ret)
+		return ret;
+
+	/* Setup the period capture mode */
+	ret = regmap_update_bits(regmap, ATMEL_TC_REG(priv->channel[0], CMR),
+				 ATMEL_TC_WAVE | ATMEL_TC_ABETRG | ATMEL_TC_CMR_MASK |
+				 ATMEL_TC_TCCLKS,
+				 ATMEL_TC_CMR_MASK);
+	if (ret)
+		return ret;
+
+	/* Enable clock and trigger counter */
+	ret = regmap_write(regmap, ATMEL_TC_REG(priv->channel[0], CCR),
+			   ATMEL_TC_CLKEN | ATMEL_TC_SWTRG);
+	if (ret)
+		return ret;
+
 	priv->tc_cfg = tcb_config;
 	priv->regmap = regmap;
 	counter->name = dev_name(&pdev->dev);
diff --git linux-libre-6.1.132-gnu/drivers/counter/stm32-lptimer-cnt.c linux-libre-6.1.133-gnu/drivers/counter/stm32-lptimer-cnt.c
index 8439755559b2..537fe9b669f3 100644
--- linux-libre-6.1.132-gnu/drivers/counter/stm32-lptimer-cnt.c
+++ linux-libre-6.1.133-gnu/drivers/counter/stm32-lptimer-cnt.c
@@ -58,37 +58,43 @@ static int stm32_lptim_set_enable_state(struct stm32_lptim_cnt *priv,
 		return 0;
 	}
 
+	ret = clk_enable(priv->clk);
+	if (ret)
+		goto disable_cnt;
+
 	/* LP timer must be enabled before writing CMP & ARR */
 	ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, priv->ceiling);
 	if (ret)
-		return ret;
+		goto disable_clk;
 
 	ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, 0);
 	if (ret)
-		return ret;
+		goto disable_clk;
 
 	/* ensure CMP & ARR registers are properly written */
 	ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
 				       (val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
 				       100, 1000);
 	if (ret)
-		return ret;
+		goto disable_clk;
 
 	ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
 			   STM32_LPTIM_CMPOKCF_ARROKCF);
 	if (ret)
-		return ret;
+		goto disable_clk;
 
-	ret = clk_enable(priv->clk);
-	if (ret) {
-		regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
-		return ret;
-	}
 	priv->enabled = true;
 
 	/* Start LP timer in continuous mode */
 	return regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
 				  STM32_LPTIM_CNTSTRT, STM32_LPTIM_CNTSTRT);
+
+disable_clk:
+	clk_disable(priv->clk);
+disable_cnt:
+	regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+
+	return ret;
 }
 
 static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
diff --git linux-libre-6.1.132-gnu/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c linux-libre-6.1.133-gnu/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
index e78954514e3e..958170fbfece 100644
--- linux-libre-6.1.132-gnu/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
+++ linux-libre-6.1.133-gnu/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
@@ -1772,7 +1772,7 @@ static int dcn315_populate_dml_pipes_from_context(
 				bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc)
 						|| (pipe->plane_state && pipe->plane_state->src_rect.width > 5120);
 
-				if (remaining_det_segs > MIN_RESERVED_DET_SEGS)
+				if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0)
 					pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes +
 							(crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0);
 				if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) {
diff --git linux-libre-6.1.132-gnu/drivers/hid/hid-plantronics.c linux-libre-6.1.133-gnu/drivers/hid/hid-plantronics.c
index 25cfd964dc25..acb9eb18f7cc 100644
--- linux-libre-6.1.132-gnu/drivers/hid/hid-plantronics.c
+++ linux-libre-6.1.133-gnu/drivers/hid/hid-plantronics.c
@@ -6,9 +6,6 @@
  *  Copyright (c) 2015-2018 Terry Junge <terry.junge@plantronics.com>
  */
 
-/*
- */
-
 #include "hid-ids.h"
 
 #include <linux/hid.h>
@@ -23,30 +20,28 @@
 
 #define PLT_VOL_UP		0x00b1
 #define PLT_VOL_DOWN		0x00b2
+#define PLT_MIC_MUTE		0x00b5
 
 #define PLT1_VOL_UP		(PLT_HID_1_0_PAGE | PLT_VOL_UP)
 #define PLT1_VOL_DOWN		(PLT_HID_1_0_PAGE | PLT_VOL_DOWN)
+#define PLT1_MIC_MUTE		(PLT_HID_1_0_PAGE | PLT_MIC_MUTE)
 #define PLT2_VOL_UP		(PLT_HID_2_0_PAGE | PLT_VOL_UP)
 #define PLT2_VOL_DOWN		(PLT_HID_2_0_PAGE | PLT_VOL_DOWN)
+#define PLT2_MIC_MUTE		(PLT_HID_2_0_PAGE | PLT_MIC_MUTE)
+#define HID_TELEPHONY_MUTE	(HID_UP_TELEPHONY | 0x2f)
+#define HID_CONSUMER_MUTE	(HID_UP_CONSUMER | 0xe2)
 
 #define PLT_DA60		0xda60
 #define PLT_BT300_MIN		0x0413
 #define PLT_BT300_MAX		0x0418
 
-
-#define PLT_ALLOW_CONSUMER (field->application == HID_CP_CONSUMERCONTROL && \
-			    (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER)
-
-#define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0)
-#define PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS BIT(1)
-
 #define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */
-#define PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT 220 /* ms */
 
 struct plt_drv_data {
 	unsigned long device_type;
-	unsigned long last_volume_key_ts;
-	u32 quirks;
+	unsigned long last_key_ts;
+	unsigned long double_key_to;
+	__u16 last_key;
 };
 
 static int plantronics_input_mapping(struct hid_device *hdev,
@@ -58,34 +53,43 @@ static int plantronics_input_mapping(struct hid_device *hdev,
 	unsigned short mapped_key;
 	struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
 	unsigned long plt_type = drv_data->device_type;
+	int allow_mute = usage->hid == HID_TELEPHONY_MUTE;
+	int allow_consumer = field->application == HID_CP_CONSUMERCONTROL &&
+			(usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER &&
+			usage->hid != HID_CONSUMER_MUTE;
 
 	/* special case for PTT products */
 	if (field->application == HID_GD_JOYSTICK)
 		goto defaulted;
 
-	/* handle volume up/down mapping */
 	/* non-standard types or multi-HID interfaces - plt_type is PID */
 	if (!(plt_type & HID_USAGE_PAGE)) {
 		switch (plt_type) {
 		case PLT_DA60:
-			if (PLT_ALLOW_CONSUMER)
+			if (allow_consumer)
 				goto defaulted;
-			goto ignored;
+			if (usage->hid == HID_CONSUMER_MUTE) {
+				mapped_key = KEY_MICMUTE;
+				goto mapped;
+			}
+			break;
 		default:
-			if (PLT_ALLOW_CONSUMER)
+			if (allow_consumer || allow_mute)
 				goto defaulted;
 		}
+		goto ignored;
 	}
-	/* handle standard types - plt_type is 0xffa0uuuu or 0xffa2uuuu */
-	/* 'basic telephony compliant' - allow default consumer page map */
-	else if ((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY &&
-		 (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) {
-		if (PLT_ALLOW_CONSUMER)
-			goto defaulted;
-	}
-	/* not 'basic telephony' - apply legacy mapping */
-	/* only map if the field is in the device's primary vendor page */
-	else if (!((field->application ^ plt_type) & HID_USAGE_PAGE)) {
+
+	/* handle standard consumer control mapping */
+	/* and standard telephony mic mute mapping */
+	if (allow_consumer || allow_mute)
+		goto defaulted;
+
+	/* handle vendor unique types - plt_type is 0xffa0uuuu or 0xffa2uuuu */
+	/* if not 'basic telephony compliant' - map vendor unique controls */
+	if (!((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY &&
+	      (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) &&
+	      !((field->application ^ plt_type) & HID_USAGE_PAGE))
 		switch (usage->hid) {
 		case PLT1_VOL_UP:
 		case PLT2_VOL_UP:
@@ -95,8 +99,11 @@ static int plantronics_input_mapping(struct hid_device *hdev,
 		case PLT2_VOL_DOWN:
 			mapped_key = KEY_VOLUMEDOWN;
 			goto mapped;
+		case PLT1_MIC_MUTE:
+		case PLT2_MIC_MUTE:
+			mapped_key = KEY_MICMUTE;
+			goto mapped;
 		}
-	}
 
 /*
  * Future mapping of call control or other usages,
@@ -105,6 +112,8 @@ static int plantronics_input_mapping(struct hid_device *hdev,
  */
 
 ignored:
+	hid_dbg(hdev, "usage: %08x (appl: %08x) - ignored\n",
+		usage->hid, field->application);
 	return -1;
 
 defaulted:
@@ -123,38 +132,26 @@ static int plantronics_event(struct hid_device *hdev, struct hid_field *field,
 			     struct hid_usage *usage, __s32 value)
 {
 	struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+	unsigned long prev_tsto, cur_ts;
+	__u16 prev_key, cur_key;
 
-	if (drv_data->quirks & PLT_QUIRK_DOUBLE_VOLUME_KEYS) {
-		unsigned long prev_ts, cur_ts;
+	/* Usages are filtered in plantronics_usages. */
 
-		/* Usages are filtered in plantronics_usages. */
+	/* HZ too low for ms resolution - double key detection disabled */
+	/* or it is a key release - handle key presses only. */
+	if (!drv_data->double_key_to || !value)
+		return 0;
 
-		if (!value) /* Handle key presses only. */
-			return 0;
+	prev_tsto = drv_data->last_key_ts + drv_data->double_key_to;
+	cur_ts = drv_data->last_key_ts = jiffies;
+	prev_key = drv_data->last_key;
+	cur_key = drv_data->last_key = usage->code;
 
-		prev_ts = drv_data->last_volume_key_ts;
-		cur_ts = jiffies;
-		if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_DOUBLE_KEY_TIMEOUT)
-			return 1; /* Ignore the repeated key. */
-
-		drv_data->last_volume_key_ts = cur_ts;
+	/* If the same key occurs in <= double_key_to -- ignore it */
+	if (prev_key == cur_key && time_before_eq(cur_ts, prev_tsto)) {
+		hid_dbg(hdev, "double key %d ignored\n", cur_key);
+		return 1; /* Ignore the repeated key. */
 	}
-	if (drv_data->quirks & PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS) {
-		unsigned long prev_ts, cur_ts;
-
-		/* Usages are filtered in plantronics_usages. */
-
-		if (!value) /* Handle key presses only. */
-			return 0;
-
-		prev_ts = drv_data->last_volume_key_ts;
-		cur_ts = jiffies;
-		if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT)
-			return 1; /* Ignore the followed opposite volume key. */
-
-		drv_data->last_volume_key_ts = cur_ts;
-	}
-
 	return 0;
 }
 
@@ -196,12 +193,16 @@ static int plantronics_probe(struct hid_device *hdev,
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "parse failed\n");
-		goto err;
+		return ret;
 	}
 
 	drv_data->device_type = plantronics_device_type(hdev);
-	drv_data->quirks = id->driver_data;
-	drv_data->last_volume_key_ts = jiffies - msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT);
+	drv_data->double_key_to = msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT);
+	drv_data->last_key_ts = jiffies - drv_data->double_key_to;
+
+	/* if HZ does not allow ms resolution - disable double key detection */
+	if (drv_data->double_key_to < PLT_DOUBLE_KEY_TIMEOUT)
+		drv_data->double_key_to = 0;
 
 	hid_set_drvdata(hdev, drv_data);
 
@@ -210,29 +211,10 @@ static int plantronics_probe(struct hid_device *hdev,
 	if (ret)
 		hid_err(hdev, "hw start failed\n");
 
-err:
 	return ret;
 }
 
 static const struct hid_device_id plantronics_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
-					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3210_SERIES),
-		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
-					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES),
-		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
-					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES),
-		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
-					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES),
-		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
-					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3325_SERIES),
-		.driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
-					 USB_DEVICE_ID_PLANTRONICS_ENCOREPRO_500_SERIES),
-		.driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) },
 	{ }
 };
@@ -241,6 +223,14 @@ MODULE_DEVICE_TABLE(hid, plantronics_devices);
 static const struct hid_usage_id plantronics_usages[] = {
 	{ HID_CP_VOLUMEUP, EV_KEY, HID_ANY_ID },
 	{ HID_CP_VOLUMEDOWN, EV_KEY, HID_ANY_ID },
+	{ HID_TELEPHONY_MUTE, EV_KEY, HID_ANY_ID },
+	{ HID_CONSUMER_MUTE, EV_KEY, HID_ANY_ID },
+	{ PLT2_VOL_UP, EV_KEY, HID_ANY_ID },
+	{ PLT2_VOL_DOWN, EV_KEY, HID_ANY_ID },
+	{ PLT2_MIC_MUTE, EV_KEY, HID_ANY_ID },
+	{ PLT1_VOL_UP, EV_KEY, HID_ANY_ID },
+	{ PLT1_VOL_DOWN, EV_KEY, HID_ANY_ID },
+	{ PLT1_MIC_MUTE, EV_KEY, HID_ANY_ID },
 	{ HID_TERMINATOR, HID_TERMINATOR, HID_TERMINATOR }
 };
 
diff --git linux-libre-6.1.132-gnu/drivers/media/i2c/et8ek8/et8ek8_driver.c linux-libre-6.1.133-gnu/drivers/media/i2c/et8ek8/et8ek8_driver.c
index ff9bb9fc97dd..49fe2bd702f7 100644
--- linux-libre-6.1.132-gnu/drivers/media/i2c/et8ek8/et8ek8_driver.c
+++ linux-libre-6.1.133-gnu/drivers/media/i2c/et8ek8/et8ek8_driver.c
@@ -1460,7 +1460,7 @@ err_mutex:
 	return ret;
 }
 
-static void __exit et8ek8_remove(struct i2c_client *client)
+static void et8ek8_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
 	struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
@@ -1502,7 +1502,7 @@ static struct i2c_driver et8ek8_i2c_driver = {
 		.of_match_table	= et8ek8_of_table,
 	},
 	.probe_new	= et8ek8_probe,
-	.remove		= __exit_p(et8ek8_remove),
+	.remove		= et8ek8_remove,
 	.id_table	= et8ek8_id_table,
 };
 
diff --git linux-libre-6.1.132-gnu/drivers/memstick/host/rtsx_usb_ms.c linux-libre-6.1.133-gnu/drivers/memstick/host/rtsx_usb_ms.c
index 29271ad4728a..dec279845a75 100644
--- linux-libre-6.1.132-gnu/drivers/memstick/host/rtsx_usb_ms.c
+++ linux-libre-6.1.133-gnu/drivers/memstick/host/rtsx_usb_ms.c
@@ -813,6 +813,7 @@ static int rtsx_usb_ms_drv_remove(struct platform_device *pdev)
 
 	host->eject = true;
 	cancel_work_sync(&host->handle_req);
+	cancel_delayed_work_sync(&host->poll_card);
 
 	mutex_lock(&host->host_mutex);
 	if (host->req) {
diff --git linux-libre-6.1.132-gnu/drivers/net/usb/qmi_wwan.c linux-libre-6.1.133-gnu/drivers/net/usb/qmi_wwan.c
index 65aefebdf9a9..b4c0413c6522 100644
--- linux-libre-6.1.132-gnu/drivers/net/usb/qmi_wwan.c
+++ linux-libre-6.1.133-gnu/drivers/net/usb/qmi_wwan.c
@@ -1372,9 +1372,11 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a0, 0)}, /* Telit FN920C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a4, 0)}, /* Telit FN920C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a9, 0)}, /* Telit FN920C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10b0, 0)}, /* Telit FE990B */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c0, 0)}, /* Telit FE910C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c4, 0)}, /* Telit FE910C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c8, 0)}, /* Telit FE910C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10d0, 0)}, /* Telit FN990B */
 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
diff --git linux-libre-6.1.132-gnu/drivers/net/usb/usbnet.c linux-libre-6.1.133-gnu/drivers/net/usb/usbnet.c
index ae1282487b02..73bddd1645d9 100644
--- linux-libre-6.1.132-gnu/drivers/net/usb/usbnet.c
+++ linux-libre-6.1.133-gnu/drivers/net/usb/usbnet.c
@@ -178,6 +178,17 @@ int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
 }
 EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
 
+static bool usbnet_needs_usb_name_format(struct usbnet *dev, struct net_device *net)
+{
+	/* Point to point devices which don't have a real MAC address
+	 * (or report a fake local one) have historically used the usb%d
+	 * naming. Preserve this..
+	 */
+	return (dev->driver_info->flags & FLAG_POINTTOPOINT) != 0 &&
+		(is_zero_ether_addr(net->dev_addr) ||
+		 is_local_ether_addr(net->dev_addr));
+}
+
 static void intr_complete (struct urb *urb)
 {
 	struct usbnet	*dev = urb->context;
@@ -1761,13 +1772,11 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 		if (status < 0)
 			goto out1;
 
-		// heuristic:  "usb%d" for links we know are two-host,
-		// else "eth%d" when there's reasonable doubt.  userspace
-		// can rename the link if it knows better.
+		/* heuristic: rename to "eth%d" if we are not sure this link
+		 * is two-host (these links keep "usb%d")
+		 */
 		if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
-		    ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
-		     /* somebody touched it*/
-		     !is_zero_ether_addr(net->dev_addr)))
+		    !usbnet_needs_usb_name_format(dev, net))
 			strscpy(net->name, "eth%d", sizeof(net->name));
 		/* WLAN devices should always be named "wlan%d" */
 		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
diff --git linux-libre-6.1.132-gnu/drivers/tty/serial/8250/8250_dma.c linux-libre-6.1.133-gnu/drivers/tty/serial/8250/8250_dma.c
index 0dd0ae76b90c..ad410e85effd 100644
--- linux-libre-6.1.132-gnu/drivers/tty/serial/8250/8250_dma.c
+++ linux-libre-6.1.133-gnu/drivers/tty/serial/8250/8250_dma.c
@@ -146,7 +146,7 @@ void serial8250_tx_dma_flush(struct uart_8250_port *p)
 	 */
 	dma->tx_size = 0;
 
-	dmaengine_terminate_async(dma->rxchan);
+	dmaengine_terminate_async(dma->txchan);
 }
 
 int serial8250_rx_dma(struct uart_8250_port *p)
diff --git linux-libre-6.1.132-gnu/drivers/tty/serial/8250/8250_pci.c linux-libre-6.1.133-gnu/drivers/tty/serial/8250/8250_pci.c
index 6026cc50a7ea..cef5b346341c 100644
--- linux-libre-6.1.132-gnu/drivers/tty/serial/8250/8250_pci.c
+++ linux-libre-6.1.133-gnu/drivers/tty/serial/8250/8250_pci.c
@@ -2596,6 +2596,22 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.init		= pci_oxsemi_tornado_init,
 		.setup		= pci_oxsemi_tornado_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4026,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4021,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8811,
@@ -5127,6 +5143,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_2_115200 },
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0BA2,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0BA3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
 	/*
 	 * Brainboxes UC-235/246
 	 */
@@ -5247,6 +5271,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_b2_4_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C42,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C43,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
 	/*
 	 * Brainboxes UC-420
 	 */
@@ -5473,6 +5505,20 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
 		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes XC-235
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4026,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes XC-475
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4021,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
 
 	/*
 	 * Perle PCI-RAS cards
diff --git linux-libre-6.1.132-gnu/drivers/usb/gadget/function/uvc_v4l2.c linux-libre-6.1.133-gnu/drivers/usb/gadget/function/uvc_v4l2.c
index a189b08bba80..5aeeaff7b283 100644
--- linux-libre-6.1.132-gnu/drivers/usb/gadget/function/uvc_v4l2.c
+++ linux-libre-6.1.133-gnu/drivers/usb/gadget/function/uvc_v4l2.c
@@ -121,6 +121,9 @@ static struct uvcg_format *find_format_by_pix(struct uvc_device *uvc,
 	list_for_each_entry(format, &uvc->header->formats, entry) {
 		struct uvc_format_desc *fmtdesc = to_uvc_format(format->fmt);
 
+		if (IS_ERR(fmtdesc))
+			continue;
+
 		if (fmtdesc->fcc == pixelformat) {
 			uformat = format->fmt;
 			break;
@@ -240,6 +243,7 @@ uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt)
 	struct uvc_video *video = &uvc->video;
 	struct uvcg_format *uformat;
 	struct uvcg_frame *uframe;
+	const struct uvc_format_desc *fmtdesc;
 	u8 *fcc;
 
 	if (fmt->type != video->queue.queue.type)
@@ -265,7 +269,10 @@ uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt)
 	fmt->fmt.pix.field = V4L2_FIELD_NONE;
 	fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(uformat, uframe);
 	fmt->fmt.pix.sizeimage = uvc_get_frame_size(uformat, uframe);
-	fmt->fmt.pix.pixelformat = to_uvc_format(uformat)->fcc;
+	fmtdesc = to_uvc_format(uformat);
+	if (IS_ERR(fmtdesc))
+		return PTR_ERR(fmtdesc);
+	fmt->fmt.pix.pixelformat = fmtdesc->fcc;
 	fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
 	fmt->fmt.pix.priv = 0;
 
@@ -378,6 +385,9 @@ uvc_v4l2_enum_format(struct file *file, void *fh, struct v4l2_fmtdesc *f)
 		f->flags |= V4L2_FMT_FLAG_COMPRESSED;
 
 	fmtdesc = to_uvc_format(uformat);
+	if (IS_ERR(fmtdesc))
+		return PTR_ERR(fmtdesc);
+
 	f->pixelformat = fmtdesc->fcc;
 
 	strscpy(f->description, fmtdesc->name, sizeof(f->description));
diff --git linux-libre-6.1.132-gnu/drivers/usb/typec/ucsi/ucsi.c linux-libre-6.1.133-gnu/drivers/usb/typec/ucsi/ucsi.c
index 9c82dc94da81..2adf5fdc0c56 100644
--- linux-libre-6.1.132-gnu/drivers/usb/typec/ucsi/ucsi.c
+++ linux-libre-6.1.133-gnu/drivers/usb/typec/ucsi/ucsi.c
@@ -1313,11 +1313,11 @@ static int ucsi_init(struct ucsi *ucsi)
 
 err_unregister:
 	for (con = connector; con->port; con++) {
+		if (con->wq)
+			destroy_workqueue(con->wq);
 		ucsi_unregister_partner(con);
 		ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
 		ucsi_unregister_port_psy(con);
-		if (con->wq)
-			destroy_workqueue(con->wq);
 		typec_unregister_port(con->port);
 		con->port = NULL;
 	}
@@ -1479,10 +1479,6 @@ void ucsi_unregister(struct ucsi *ucsi)
 
 	for (i = 0; i < ucsi->cap.num_connectors; i++) {
 		cancel_work_sync(&ucsi->connector[i].work);
-		ucsi_unregister_partner(&ucsi->connector[i]);
-		ucsi_unregister_altmodes(&ucsi->connector[i],
-					 UCSI_RECIPIENT_CON);
-		ucsi_unregister_port_psy(&ucsi->connector[i]);
 
 		if (ucsi->connector[i].wq) {
 			struct ucsi_work *uwork;
@@ -1497,6 +1493,11 @@ void ucsi_unregister(struct ucsi *ucsi)
 			mutex_unlock(&ucsi->connector[i].lock);
 			destroy_workqueue(ucsi->connector[i].wq);
 		}
+
+		ucsi_unregister_partner(&ucsi->connector[i]);
+		ucsi_unregister_altmodes(&ucsi->connector[i],
+					 UCSI_RECIPIENT_CON);
+		ucsi_unregister_port_psy(&ucsi->connector[i]);
 		typec_unregister_port(ucsi->connector[i].port);
 	}
 
diff --git linux-libre-6.1.132-gnu/net/atm/mpc.c linux-libre-6.1.133-gnu/net/atm/mpc.c
index 033871e718a3..583c27131b7d 100644
--- linux-libre-6.1.132-gnu/net/atm/mpc.c
+++ linux-libre-6.1.133-gnu/net/atm/mpc.c
@@ -1314,6 +1314,8 @@ static void MPOA_cache_impos_rcvd(struct k_message *msg,
 	holding_time = msg->content.eg_info.holding_time;
 	dprintk("(%s) entry = %p, holding_time = %u\n",
 		mpc->dev->name, entry, holding_time);
+	if (entry == NULL && !holding_time)
+		return;
 	if (entry == NULL && holding_time) {
 		entry = mpc->eg_ops->add_entry(msg, mpc);
 		mpc->eg_ops->put(entry);
diff --git linux-libre-6.1.132-gnu/net/ipv6/netfilter/nf_socket_ipv6.c linux-libre-6.1.133-gnu/net/ipv6/netfilter/nf_socket_ipv6.c
index a7690ec62325..9ea5ef56cb27 100644
--- linux-libre-6.1.132-gnu/net/ipv6/netfilter/nf_socket_ipv6.c
+++ linux-libre-6.1.133-gnu/net/ipv6/netfilter/nf_socket_ipv6.c
@@ -103,6 +103,10 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
 	struct sk_buff *data_skb = NULL;
 	int doff = 0;
 	int thoff = 0, tproto;
+#if IS_ENABLED(CONFIG_NF_CONNTRACK)
+	enum ip_conntrack_info ctinfo;
+	struct nf_conn const *ct;
+#endif
 
 	tproto = ipv6_find_hdr(skb, &thoff, -1, NULL, NULL);
 	if (tproto < 0) {
@@ -136,6 +140,25 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
 		return NULL;
 	}
 
+#if IS_ENABLED(CONFIG_NF_CONNTRACK)
+	/* Do the lookup with the original socket address in
+	 * case this is a reply packet of an established
+	 * SNAT-ted connection.
+	 */
+	ct = nf_ct_get(skb, &ctinfo);
+	if (ct &&
+	    ((tproto != IPPROTO_ICMPV6 &&
+	      ctinfo == IP_CT_ESTABLISHED_REPLY) ||
+	     (tproto == IPPROTO_ICMPV6 &&
+	      ctinfo == IP_CT_RELATED_REPLY)) &&
+	    (ct->status & IPS_SRC_NAT_DONE)) {
+		daddr = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.in6;
+		dport = (tproto == IPPROTO_TCP) ?
+			ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.tcp.port :
+			ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.udp.port;
+	}
+#endif
+
 	return nf_socket_get_sock_v6(net, data_skb, doff, tproto, saddr, daddr,
 				     sport, dport, indev);
 }
diff --git linux-libre-6.1.132-gnu/sound/pci/hda/patch_realtek.c linux-libre-6.1.133-gnu/sound/pci/hda/patch_realtek.c
index 102af43f7442..a562e574fe40 100644
--- linux-libre-6.1.132-gnu/sound/pci/hda/patch_realtek.c
+++ linux-libre-6.1.133-gnu/sound/pci/hda/patch_realtek.c
@@ -9867,6 +9867,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
 	SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
 	SND_PCI_QUIRK(0x103c, 0x881d, "HP 250 G8 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
+	SND_PCI_QUIRK(0x103c, 0x881e, "HP Laptop 15s-du3xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8847, "HP EliteBook x360 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x884b, "HP EliteBook 840 Aero G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
diff --git linux-libre-6.1.132-gnu/sound/usb/mixer_quirks.c linux-libre-6.1.133-gnu/sound/usb/mixer_quirks.c
index 06965da51dd0..be0b3c8ac705 100644
--- linux-libre-6.1.132-gnu/sound/usb/mixer_quirks.c
+++ linux-libre-6.1.133-gnu/sound/usb/mixer_quirks.c
@@ -3575,6 +3575,52 @@ static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
 	}
 }
 
+/*
+ * Some Plantronics headsets have control names that don't meet ALSA naming
+ * standards. This function fixes nonstandard source names. By the time
+ * this function is called the control name should look like one of these:
+ * "source names Playback Volume"
+ * "source names Playback Switch"
+ * "source names Capture Volume"
+ * "source names Capture Switch"
+ * If any of the trigger words are found in the name then the name will
+ * be changed to:
+ * "Headset Playback Volume"
+ * "Headset Playback Switch"
+ * "Headset Capture Volume"
+ * "Headset Capture Switch"
+ * depending on the current suffix.
+ */
+static void snd_fix_plt_name(struct snd_usb_audio *chip,
+			     struct snd_ctl_elem_id *id)
+{
+	/* no variant of "Sidetone" should be added to this list */
+	static const char * const trigger[] = {
+		"Earphone", "Microphone", "Receive", "Transmit"
+	};
+	static const char * const suffix[] = {
+		" Playback Volume", " Playback Switch",
+		" Capture Volume", " Capture Switch"
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(trigger); i++)
+		if (strstr(id->name, trigger[i]))
+			goto triggered;
+	usb_audio_dbg(chip, "no change in %s\n", id->name);
+	return;
+
+triggered:
+	for (i = 0; i < ARRAY_SIZE(suffix); i++)
+		if (strstr(id->name, suffix[i])) {
+			usb_audio_dbg(chip, "fixing kctl name %s\n", id->name);
+			snprintf(id->name, sizeof(id->name), "Headset%s",
+				 suffix[i]);
+			return;
+		}
+	usb_audio_dbg(chip, "something wrong in kctl name %s\n", id->name);
+}
+
 void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
 				  struct usb_mixer_elem_info *cval, int unitid,
 				  struct snd_kcontrol *kctl)
@@ -3592,5 +3638,10 @@ void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
 			cval->min_mute = 1;
 		break;
 	}
+
+	/* ALSA-ify some Plantronics headset control names */
+	if (USB_ID_VENDOR(mixer->chip->usb_id) == 0x047f &&
+	    (cval->control == UAC_FU_MUTE || cval->control == UAC_FU_VOLUME))
+		snd_fix_plt_name(mixer->chip, &kctl->id);
 }
 
