diff --git linux-libre-6.15-gnu/Makefile linux-libre-6.15.1-gnu/Makefile
index e9f8e55427ec..4fd4c163d442 100644
--- linux-libre-6.15-gnu/Makefile
+++ linux-libre-6.15.1-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 15
-SUBLEVEL = 0
+SUBLEVEL = 1
 EXTRAVERSION = -gnu
 NAME = Baby Opossum Posse
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index 51c6e19e40b8..7d9394a04302 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -222,9 +222,9 @@
 			status = "disabled";
 		};
 
-		gpio0: gpio@ffc03200 {
+		gpio0: gpio@10c03200 {
 			compatible = "snps,dw-apb-gpio";
-			reg = <0xffc03200 0x100>;
+			reg = <0x10c03200 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			resets = <&rst GPIO0_RESET>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 942290028972..3c02351fbb15 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -378,6 +378,8 @@
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 3394ae2d1300..2329460b2103 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2413,6 +2413,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x00>,
 				 <&apps_smmu 0x481 0x00>;
@@ -4903,15 +4905,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2141 0x04a0>,
-							 <&apps_smmu 0x2161 0x04a0>,
-							 <&apps_smmu 0x2181 0x0400>,
-							 <&apps_smmu 0x21c1 0x04a0>,
-							 <&apps_smmu 0x21e1 0x04a0>,
-							 <&apps_smmu 0x2541 0x04a0>,
-							 <&apps_smmu 0x2561 0x04a0>,
-							 <&apps_smmu 0x2581 0x0400>,
-							 <&apps_smmu 0x25c1 0x04a0>,
-							 <&apps_smmu 0x25e1 0x04a0>;
+							 <&apps_smmu 0x2181 0x0400>;
 						dma-coherent;
 					};
 
@@ -4919,15 +4913,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2142 0x04a0>,
-							 <&apps_smmu 0x2162 0x04a0>,
-							 <&apps_smmu 0x2182 0x0400>,
-							 <&apps_smmu 0x21c2 0x04a0>,
-							 <&apps_smmu 0x21e2 0x04a0>,
-							 <&apps_smmu 0x2542 0x04a0>,
-							 <&apps_smmu 0x2562 0x04a0>,
-							 <&apps_smmu 0x2582 0x0400>,
-							 <&apps_smmu 0x25c2 0x04a0>,
-							 <&apps_smmu 0x25e2 0x04a0>;
+							 <&apps_smmu 0x2182 0x0400>;
 						dma-coherent;
 					};
 
@@ -4935,15 +4921,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2143 0x04a0>,
-							 <&apps_smmu 0x2163 0x04a0>,
-							 <&apps_smmu 0x2183 0x0400>,
-							 <&apps_smmu 0x21c3 0x04a0>,
-							 <&apps_smmu 0x21e3 0x04a0>,
-							 <&apps_smmu 0x2543 0x04a0>,
-							 <&apps_smmu 0x2563 0x04a0>,
-							 <&apps_smmu 0x2583 0x0400>,
-							 <&apps_smmu 0x25c3 0x04a0>,
-							 <&apps_smmu 0x25e3 0x04a0>;
+							 <&apps_smmu 0x2183 0x0400>;
 						dma-coherent;
 					};
 
@@ -4951,15 +4929,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2144 0x04a0>,
-							 <&apps_smmu 0x2164 0x04a0>,
-							 <&apps_smmu 0x2184 0x0400>,
-							 <&apps_smmu 0x21c4 0x04a0>,
-							 <&apps_smmu 0x21e4 0x04a0>,
-							 <&apps_smmu 0x2544 0x04a0>,
-							 <&apps_smmu 0x2564 0x04a0>,
-							 <&apps_smmu 0x2584 0x0400>,
-							 <&apps_smmu 0x25c4 0x04a0>,
-							 <&apps_smmu 0x25e4 0x04a0>;
+							 <&apps_smmu 0x2184 0x0400>;
 						dma-coherent;
 					};
 
@@ -4967,15 +4937,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2145 0x04a0>,
-							 <&apps_smmu 0x2165 0x04a0>,
-							 <&apps_smmu 0x2185 0x0400>,
-							 <&apps_smmu 0x21c5 0x04a0>,
-							 <&apps_smmu 0x21e5 0x04a0>,
-							 <&apps_smmu 0x2545 0x04a0>,
-							 <&apps_smmu 0x2565 0x04a0>,
-							 <&apps_smmu 0x2585 0x0400>,
-							 <&apps_smmu 0x25c5 0x04a0>,
-							 <&apps_smmu 0x25e5 0x04a0>;
+							 <&apps_smmu 0x2185 0x0400>;
 						dma-coherent;
 					};
 
@@ -4983,15 +4945,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2146 0x04a0>,
-							 <&apps_smmu 0x2166 0x04a0>,
-							 <&apps_smmu 0x2186 0x0400>,
-							 <&apps_smmu 0x21c6 0x04a0>,
-							 <&apps_smmu 0x21e6 0x04a0>,
-							 <&apps_smmu 0x2546 0x04a0>,
-							 <&apps_smmu 0x2566 0x04a0>,
-							 <&apps_smmu 0x2586 0x0400>,
-							 <&apps_smmu 0x25c6 0x04a0>,
-							 <&apps_smmu 0x25e6 0x04a0>;
+							 <&apps_smmu 0x2186 0x0400>;
 						dma-coherent;
 					};
 
@@ -4999,15 +4953,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2147 0x04a0>,
-							 <&apps_smmu 0x2167 0x04a0>,
-							 <&apps_smmu 0x2187 0x0400>,
-							 <&apps_smmu 0x21c7 0x04a0>,
-							 <&apps_smmu 0x21e7 0x04a0>,
-							 <&apps_smmu 0x2547 0x04a0>,
-							 <&apps_smmu 0x2567 0x04a0>,
-							 <&apps_smmu 0x2587 0x0400>,
-							 <&apps_smmu 0x25c7 0x04a0>,
-							 <&apps_smmu 0x25e7 0x04a0>;
+							 <&apps_smmu 0x2187 0x0400>;
 						dma-coherent;
 					};
 
@@ -5015,15 +4961,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2148 0x04a0>,
-							 <&apps_smmu 0x2168 0x04a0>,
-							 <&apps_smmu 0x2188 0x0400>,
-							 <&apps_smmu 0x21c8 0x04a0>,
-							 <&apps_smmu 0x21e8 0x04a0>,
-							 <&apps_smmu 0x2548 0x04a0>,
-							 <&apps_smmu 0x2568 0x04a0>,
-							 <&apps_smmu 0x2588 0x0400>,
-							 <&apps_smmu 0x25c8 0x04a0>,
-							 <&apps_smmu 0x25e8 0x04a0>;
+							 <&apps_smmu 0x2188 0x0400>;
 						dma-coherent;
 					};
 
@@ -5031,31 +4969,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2149 0x04a0>,
-							 <&apps_smmu 0x2169 0x04a0>,
-							 <&apps_smmu 0x2189 0x0400>,
-							 <&apps_smmu 0x21c9 0x04a0>,
-							 <&apps_smmu 0x21e9 0x04a0>,
-							 <&apps_smmu 0x2549 0x04a0>,
-							 <&apps_smmu 0x2569 0x04a0>,
-							 <&apps_smmu 0x2589 0x0400>,
-							 <&apps_smmu 0x25c9 0x04a0>,
-							 <&apps_smmu 0x25e9 0x04a0>;
-						dma-coherent;
-					};
-
-					compute-cb@10 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <10>;
-						iommus = <&apps_smmu 0x214a 0x04a0>,
-							 <&apps_smmu 0x216a 0x04a0>,
-							 <&apps_smmu 0x218a 0x0400>,
-							 <&apps_smmu 0x21ca 0x04a0>,
-							 <&apps_smmu 0x21ea 0x04a0>,
-							 <&apps_smmu 0x254a 0x04a0>,
-							 <&apps_smmu 0x256a 0x04a0>,
-							 <&apps_smmu 0x258a 0x0400>,
-							 <&apps_smmu 0x25ca 0x04a0>,
-							 <&apps_smmu 0x25ea 0x04a0>;
+							 <&apps_smmu 0x2189 0x0400>;
 						dma-coherent;
 					};
 
@@ -5063,15 +4977,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x214b 0x04a0>,
-							 <&apps_smmu 0x216b 0x04a0>,
-							 <&apps_smmu 0x218b 0x0400>,
-							 <&apps_smmu 0x21cb 0x04a0>,
-							 <&apps_smmu 0x21eb 0x04a0>,
-							 <&apps_smmu 0x254b 0x04a0>,
-							 <&apps_smmu 0x256b 0x04a0>,
-							 <&apps_smmu 0x258b 0x0400>,
-							 <&apps_smmu 0x25cb 0x04a0>,
-							 <&apps_smmu 0x25eb 0x04a0>;
+							 <&apps_smmu 0x218b 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -5131,15 +5037,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2941 0x04a0>,
-							 <&apps_smmu 0x2961 0x04a0>,
-							 <&apps_smmu 0x2981 0x0400>,
-							 <&apps_smmu 0x29c1 0x04a0>,
-							 <&apps_smmu 0x29e1 0x04a0>,
-							 <&apps_smmu 0x2d41 0x04a0>,
-							 <&apps_smmu 0x2d61 0x04a0>,
-							 <&apps_smmu 0x2d81 0x0400>,
-							 <&apps_smmu 0x2dc1 0x04a0>,
-							 <&apps_smmu 0x2de1 0x04a0>;
+							 <&apps_smmu 0x2981 0x0400>;
 						dma-coherent;
 					};
 
@@ -5147,15 +5045,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2942 0x04a0>,
-							 <&apps_smmu 0x2962 0x04a0>,
-							 <&apps_smmu 0x2982 0x0400>,
-							 <&apps_smmu 0x29c2 0x04a0>,
-							 <&apps_smmu 0x29e2 0x04a0>,
-							 <&apps_smmu 0x2d42 0x04a0>,
-							 <&apps_smmu 0x2d62 0x04a0>,
-							 <&apps_smmu 0x2d82 0x0400>,
-							 <&apps_smmu 0x2dc2 0x04a0>,
-							 <&apps_smmu 0x2de2 0x04a0>;
+							 <&apps_smmu 0x2982 0x0400>;
 						dma-coherent;
 					};
 
@@ -5163,15 +5053,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2943 0x04a0>,
-							 <&apps_smmu 0x2963 0x04a0>,
-							 <&apps_smmu 0x2983 0x0400>,
-							 <&apps_smmu 0x29c3 0x04a0>,
-							 <&apps_smmu 0x29e3 0x04a0>,
-							 <&apps_smmu 0x2d43 0x04a0>,
-							 <&apps_smmu 0x2d63 0x04a0>,
-							 <&apps_smmu 0x2d83 0x0400>,
-							 <&apps_smmu 0x2dc3 0x04a0>,
-							 <&apps_smmu 0x2de3 0x04a0>;
+							 <&apps_smmu 0x2983 0x0400>;
 						dma-coherent;
 					};
 
@@ -5179,15 +5061,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2944 0x04a0>,
-							 <&apps_smmu 0x2964 0x04a0>,
-							 <&apps_smmu 0x2984 0x0400>,
-							 <&apps_smmu 0x29c4 0x04a0>,
-							 <&apps_smmu 0x29e4 0x04a0>,
-							 <&apps_smmu 0x2d44 0x04a0>,
-							 <&apps_smmu 0x2d64 0x04a0>,
-							 <&apps_smmu 0x2d84 0x0400>,
-							 <&apps_smmu 0x2dc4 0x04a0>,
-							 <&apps_smmu 0x2de4 0x04a0>;
+							 <&apps_smmu 0x2984 0x0400>;
 						dma-coherent;
 					};
 
@@ -5195,15 +5069,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2945 0x04a0>,
-							 <&apps_smmu 0x2965 0x04a0>,
-							 <&apps_smmu 0x2985 0x0400>,
-							 <&apps_smmu 0x29c5 0x04a0>,
-							 <&apps_smmu 0x29e5 0x04a0>,
-							 <&apps_smmu 0x2d45 0x04a0>,
-							 <&apps_smmu 0x2d65 0x04a0>,
-							 <&apps_smmu 0x2d85 0x0400>,
-							 <&apps_smmu 0x2dc5 0x04a0>,
-							 <&apps_smmu 0x2de5 0x04a0>;
+							 <&apps_smmu 0x2985 0x0400>;
 						dma-coherent;
 					};
 
@@ -5211,15 +5077,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2946 0x04a0>,
-							 <&apps_smmu 0x2966 0x04a0>,
-							 <&apps_smmu 0x2986 0x0400>,
-							 <&apps_smmu 0x29c6 0x04a0>,
-							 <&apps_smmu 0x29e6 0x04a0>,
-							 <&apps_smmu 0x2d46 0x04a0>,
-							 <&apps_smmu 0x2d66 0x04a0>,
-							 <&apps_smmu 0x2d86 0x0400>,
-							 <&apps_smmu 0x2dc6 0x04a0>,
-							 <&apps_smmu 0x2de6 0x04a0>;
+							 <&apps_smmu 0x2986 0x0400>;
 						dma-coherent;
 					};
 
@@ -5227,15 +5085,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2947 0x04a0>,
-							 <&apps_smmu 0x2967 0x04a0>,
-							 <&apps_smmu 0x2987 0x0400>,
-							 <&apps_smmu 0x29c7 0x04a0>,
-							 <&apps_smmu 0x29e7 0x04a0>,
-							 <&apps_smmu 0x2d47 0x04a0>,
-							 <&apps_smmu 0x2d67 0x04a0>,
-							 <&apps_smmu 0x2d87 0x0400>,
-							 <&apps_smmu 0x2dc7 0x04a0>,
-							 <&apps_smmu 0x2de7 0x04a0>;
+							 <&apps_smmu 0x2987 0x0400>;
 						dma-coherent;
 					};
 
@@ -5243,15 +5093,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2948 0x04a0>,
-							 <&apps_smmu 0x2968 0x04a0>,
-							 <&apps_smmu 0x2988 0x0400>,
-							 <&apps_smmu 0x29c8 0x04a0>,
-							 <&apps_smmu 0x29e8 0x04a0>,
-							 <&apps_smmu 0x2d48 0x04a0>,
-							 <&apps_smmu 0x2d68 0x04a0>,
-							 <&apps_smmu 0x2d88 0x0400>,
-							 <&apps_smmu 0x2dc8 0x04a0>,
-							 <&apps_smmu 0x2de8 0x04a0>;
+							 <&apps_smmu 0x2988 0x0400>;
 						dma-coherent;
 					};
 
@@ -5259,15 +5101,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2949 0x04a0>,
-							 <&apps_smmu 0x2969 0x04a0>,
-							 <&apps_smmu 0x2989 0x0400>,
-							 <&apps_smmu 0x29c9 0x04a0>,
-							 <&apps_smmu 0x29e9 0x04a0>,
-							 <&apps_smmu 0x2d49 0x04a0>,
-							 <&apps_smmu 0x2d69 0x04a0>,
-							 <&apps_smmu 0x2d89 0x0400>,
-							 <&apps_smmu 0x2dc9 0x04a0>,
-							 <&apps_smmu 0x2de9 0x04a0>;
+							 <&apps_smmu 0x2989 0x0400>;
 						dma-coherent;
 					};
 
@@ -5275,15 +5109,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <10>;
 						iommus = <&apps_smmu 0x294a 0x04a0>,
-							 <&apps_smmu 0x296a 0x04a0>,
-							 <&apps_smmu 0x298a 0x0400>,
-							 <&apps_smmu 0x29ca 0x04a0>,
-							 <&apps_smmu 0x29ea 0x04a0>,
-							 <&apps_smmu 0x2d4a 0x04a0>,
-							 <&apps_smmu 0x2d6a 0x04a0>,
-							 <&apps_smmu 0x2d8a 0x0400>,
-							 <&apps_smmu 0x2dca 0x04a0>,
-							 <&apps_smmu 0x2dea 0x04a0>;
+							 <&apps_smmu 0x298a 0x0400>;
 						dma-coherent;
 					};
 
@@ -5291,15 +5117,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x294b 0x04a0>,
-							 <&apps_smmu 0x296b 0x04a0>,
-							 <&apps_smmu 0x298b 0x0400>,
-							 <&apps_smmu 0x29cb 0x04a0>,
-							 <&apps_smmu 0x29eb 0x04a0>,
-							 <&apps_smmu 0x2d4b 0x04a0>,
-							 <&apps_smmu 0x2d6b 0x04a0>,
-							 <&apps_smmu 0x2d8b 0x0400>,
-							 <&apps_smmu 0x2dcb 0x04a0>,
-							 <&apps_smmu 0x2deb 0x04a0>;
+							 <&apps_smmu 0x298b 0x0400>;
 						dma-coherent;
 					};
 
@@ -5307,15 +5125,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <12>;
 						iommus = <&apps_smmu 0x294c 0x04a0>,
-							 <&apps_smmu 0x296c 0x04a0>,
-							 <&apps_smmu 0x298c 0x0400>,
-							 <&apps_smmu 0x29cc 0x04a0>,
-							 <&apps_smmu 0x29ec 0x04a0>,
-							 <&apps_smmu 0x2d4c 0x04a0>,
-							 <&apps_smmu 0x2d6c 0x04a0>,
-							 <&apps_smmu 0x2d8c 0x0400>,
-							 <&apps_smmu 0x2dcc 0x04a0>,
-							 <&apps_smmu 0x2dec 0x04a0>;
+							 <&apps_smmu 0x298c 0x0400>;
 						dma-coherent;
 					};
 
@@ -5323,15 +5133,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <13>;
 						iommus = <&apps_smmu 0x294d 0x04a0>,
-							 <&apps_smmu 0x296d 0x04a0>,
-							 <&apps_smmu 0x298d 0x0400>,
-							 <&apps_smmu 0x29Cd 0x04a0>,
-							 <&apps_smmu 0x29ed 0x04a0>,
-							 <&apps_smmu 0x2d4d 0x04a0>,
-							 <&apps_smmu 0x2d6d 0x04a0>,
-							 <&apps_smmu 0x2d8d 0x0400>,
-							 <&apps_smmu 0x2dcd 0x04a0>,
-							 <&apps_smmu 0x2ded 0x04a0>;
+							 <&apps_smmu 0x298d 0x0400>;
 						dma-coherent;
 					};
 				};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 69da30f35baa..f055600d6cfe 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -455,7 +455,7 @@
 			no-map;
 		};
 
-		pil_camera_mem: mmeory@85200000 {
+		pil_camera_mem: memory@85200000 {
 			reg = <0x0 0x85200000 0x0 0x500000>;
 			no-map;
 		};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9c809fc5fa45..419df72cd04b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -5283,6 +5283,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x584 0x11>,
 				 <&apps_smmu 0x588 0x0>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
index eac8de4005d8..ac3e00ad4177 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1957,6 +1957,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 86684cb9a932..c8a2a76a98f0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2533,6 +2533,8 @@
 				 <&apps_smmu 0x481 0>;
 
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index 9393c798423e..b6786b784e42 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -507,6 +507,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -528,6 +529,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -745,8 +747,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 984713c95884..8dcd87a4e3ba 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -330,8 +330,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
index ebb77ea804c9..ddb14a34ef20 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -359,6 +359,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -380,6 +381,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l17b_2p5: ldo17 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 1d11454f32e9..1311683e6e43 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -633,6 +633,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -654,6 +655,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -871,8 +873,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -1352,18 +1354,22 @@
 	status = "okay";
 };
 
+&smb2360_0 {
+	status = "okay";
+};
+
 &smb2360_0_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l2b_3p0>;
+};
 
+&smb2360_1 {
 	status = "okay";
 };
 
 &smb2360_1_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l14b_3p0>;
-
-	status = "okay";
 };
 
 &swr0 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 86ecce4d7249..7853d709aa1a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -290,6 +290,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l14b_3p0: ldo14 {
@@ -304,8 +305,8 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
-
 	};
 
 	regulators-1 {
@@ -508,8 +509,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 1d856512847a..45a83ebcb9ab 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -437,6 +437,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -458,6 +459,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -675,8 +677,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 4936fa5b98ff..5aeecf711340 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -20,6 +20,7 @@
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -3125,7 +3126,7 @@
 			device_type = "pci";
 			compatible = "qcom,pcie-x1e80100";
 			reg = <0x0 0x01bd0000 0x0 0x3000>,
-			      <0x0 0x78000000 0x0 0xf1d>,
+			      <0x0 0x78000000 0x0 0xf20>,
 			      <0x0 0x78000f40 0x0 0xa8>,
 			      <0x0 0x78001000 0x0 0x1000>,
 			      <0x0 0x78100000 0x0 0x100000>,
@@ -8457,8 +8458,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8483,7 +8484,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8509,7 +8510,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8535,7 +8536,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8561,7 +8562,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8587,7 +8588,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8613,7 +8614,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8639,7 +8640,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8665,7 +8666,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8683,8 +8684,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8701,8 +8702,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8719,7 +8720,7 @@
 				};
 
 				mem-critical {
-					temperature = <125000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -8727,15 +8728,19 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
 				trip-point0 {
-					temperature = <125000>;
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "critical";
 				};
 			};
 		};
@@ -8751,8 +8756,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8777,7 +8782,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8803,7 +8808,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8829,7 +8834,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8855,7 +8860,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8881,7 +8886,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8907,7 +8912,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8933,7 +8938,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8959,7 +8964,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8977,8 +8982,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8995,8 +9000,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9013,8 +9018,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9039,7 +9044,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9065,7 +9070,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9091,7 +9096,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9117,7 +9122,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9143,7 +9148,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9169,7 +9174,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9195,7 +9200,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9221,7 +9226,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9239,8 +9244,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9257,8 +9262,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9275,8 +9280,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9293,8 +9298,8 @@
 				};
 
 				nsp0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9311,8 +9316,8 @@
 				};
 
 				nsp1-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9329,8 +9334,8 @@
 				};
 
 				nsp2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9347,33 +9352,34 @@
 				};
 
 				nsp3-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		gpuss-0-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 5>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9381,25 +9387,26 @@
 		};
 
 		gpuss-1-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 6>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9407,25 +9414,26 @@
 		};
 
 		gpuss-2-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 7>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss2_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9433,25 +9441,26 @@
 		};
 
 		gpuss-3-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 8>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss3_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9459,25 +9468,26 @@
 		};
 
 		gpuss-4-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 9>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss4_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9485,25 +9495,26 @@
 		};
 
 		gpuss-5-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 10>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss5_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9511,25 +9522,26 @@
 		};
 
 		gpuss-6-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 11>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss6_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss6_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9537,25 +9549,26 @@
 		};
 
 		gpuss-7-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 12>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss7_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss7_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9574,7 +9587,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9592,7 +9605,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index e00fbaa8acc1..314d9dfdba57 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -60,16 +60,6 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc5v0_host: regulator-vcc5v0-host {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
 	vcc5v0_sys: regulator-vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -527,10 +517,10 @@
 		};
 	};
 
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
+	usb {
+		cy3304_reset: cy3304-reset {
 			rockchip,pins =
-			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
 
@@ -597,7 +587,6 @@
 	};
 
 	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
 		status = "okay";
 	};
 };
@@ -609,6 +598,29 @@
 &usbdrd_dwc3_1 {
 	status = "okay";
 	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cy3304_reset>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
+
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
+	};
 };
 
 &usb_host1_ehci {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index ebb5fc8bb8b1..3824242f8ae8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1364,6 +1364,7 @@
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru SCLK_FSPI1_X2>, <&cru HCLK_FSPI1>;
 			clock-names = "clk_sfc", "hclk_sfc";
+			power-domains = <&power RK3576_PD_SDGMAC>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1414,6 +1415,7 @@
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru SCLK_FSPI_X2>, <&cru HCLK_FSPI>;
 			clock-names = "clk_sfc", "hclk_sfc";
+			power-domains = <&power RK3576_PD_NVM>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 7d355aa73ea2..0c286f600296 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -552,8 +552,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index a1daba7b1fad..455ccc770f16 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -575,8 +575,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 6e3beb5c2e01..f9b5c97518d6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -564,8 +564,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 2>;
-		assigned-clock-parents = <&k3_clks 57 4>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 76ca02127f95..dd090813a32d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -22,7 +22,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,7 +39,6 @@
 				reg = <0x10>;
 
 				clocks = <&clk_imx219_fixed>;
-				clock-names = "xclk";
 
 				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
index ccc7f5e43184..7fc7c95f5cd5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -22,7 +22,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
index 4eaf9d757dd0..b6bfdfbbdd98 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -22,7 +22,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 94a812a1355b..5ebf7ada6e48 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,8 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
 		ti,itap-del-sel-ddr52 = <0x0>;
 		dma-coherent;
 		status = "disabled";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 11522b36e0ce..5fa70a874d7b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -44,6 +44,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: regulator-vsys3v3 {
 		/* Output of LM5141 */
 		compatible = "regulator-fixed";
@@ -76,7 +87,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
-		vin-supply = <&vsys_3v3>;
+		vin-supply = <&vsys_5v0>;
 		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
index 47bb5480b5b0..4eb3cffab032 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -19,6 +19,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
 };
 
 &csi_mux {
@@ -34,7 +61,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam0: endpoint {
@@ -56,7 +85,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam1: endpoint {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 440ef57be294..ffef3d1cfd55 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -184,6 +184,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_mmc1: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -211,6 +222,20 @@
 			 <3300000 0x1>;
 	};
 
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1042";
 		#phy-cells = <0>;
@@ -613,6 +638,12 @@
 		>;
 	};
 
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 2127316f36a3..0bf2e1821662 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -843,6 +843,10 @@
 		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
 };
 
+&serdes_wiz0 {
+	status = "okay";
+};
+
 &serdes0 {
 	status = "okay";
 	serdes0_usb_link: phy@0 {
@@ -854,6 +858,10 @@
 	};
 };
 
+&serdes_wiz1 {
+	status = "okay";
+};
+
 &serdes1 {
 	status = "okay";
 	serdes1_pcie_link: phy@0 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 6850f50530f1..beda9e40e931 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -32,6 +32,8 @@
 		assigned-clocks = <&k3_clks 279 1>;
 		assigned-clock-parents = <&k3_clks 279 5>;
 
+		status = "disabled";
+
 		serdes0: serdes@f000000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f000000 0x00010000>;
@@ -70,6 +72,8 @@
 		assigned-clocks = <&k3_clks 280 1>;
 		assigned-clock-parents = <&k3_clks 280 5>;
 
+		status = "disabled";
+
 		serdes1: serdes@f010000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f010000 0x00010000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
index 1944616ab357..1fc0a11c5ab4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ linux-libre-6.15.1-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -77,7 +77,7 @@
 
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
-			reg = <0x00004080 0x30>;
+			reg = <0x00004080 0x50>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
 					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
diff --git linux-libre-6.15-gnu/drivers/iommu/iommu.c linux-libre-6.15.1-gnu/drivers/iommu/iommu.c
index 9d728800a862..5bc2fc969494 100644
--- linux-libre-6.15-gnu/drivers/iommu/iommu.c
+++ linux-libre-6.15.1-gnu/drivers/iommu/iommu.c
@@ -277,6 +277,8 @@ int iommu_device_register(struct iommu_device *iommu,
 		err = bus_iommu_probe(iommu_buses[i]);
 	if (err)
 		iommu_device_unregister(iommu);
+	else
+		WRITE_ONCE(iommu->ready, true);
 	return err;
 }
 EXPORT_SYMBOL_GPL(iommu_device_register);
@@ -422,13 +424,15 @@ static int iommu_init_device(struct device *dev)
 	 * is buried in the bus dma_configure path. Properly unpicking that is
 	 * still a big job, so for now just invoke the whole thing. The device
 	 * already having a driver bound means dma_configure has already run and
-	 * either found no IOMMU to wait for, or we're in its replay call right
-	 * now, so either way there's no point calling it again.
+	 * found no IOMMU to wait for, so there's no point calling it again.
 	 */
-	if (!dev->driver && dev->bus->dma_configure) {
+	if (!dev->iommu->fwspec && !dev->driver && dev->bus->dma_configure) {
 		mutex_unlock(&iommu_probe_device_lock);
 		dev->bus->dma_configure(dev);
 		mutex_lock(&iommu_probe_device_lock);
+		/* If another instance finished the job for us, skip it */
+		if (!dev->iommu || dev->iommu_group)
+			return -ENODEV;
 	}
 	/*
 	 * At this point, relevant devices either now have a fwspec which will
@@ -2830,31 +2834,39 @@ bool iommu_default_passthrough(void)
 }
 EXPORT_SYMBOL_GPL(iommu_default_passthrough);
 
-const struct iommu_ops *iommu_ops_from_fwnode(const struct fwnode_handle *fwnode)
+static const struct iommu_device *iommu_from_fwnode(const struct fwnode_handle *fwnode)
 {
-	const struct iommu_ops *ops = NULL;
-	struct iommu_device *iommu;
+	const struct iommu_device *iommu, *ret = NULL;
 
 	spin_lock(&iommu_device_lock);
 	list_for_each_entry(iommu, &iommu_device_list, list)
 		if (iommu->fwnode == fwnode) {
-			ops = iommu->ops;
+			ret = iommu;
 			break;
 		}
 	spin_unlock(&iommu_device_lock);
-	return ops;
+	return ret;
+}
+
+const struct iommu_ops *iommu_ops_from_fwnode(const struct fwnode_handle *fwnode)
+{
+	const struct iommu_device *iommu = iommu_from_fwnode(fwnode);
+
+	return iommu ? iommu->ops : NULL;
 }
 
 int iommu_fwspec_init(struct device *dev, struct fwnode_handle *iommu_fwnode)
 {
-	const struct iommu_ops *ops = iommu_ops_from_fwnode(iommu_fwnode);
+	const struct iommu_device *iommu = iommu_from_fwnode(iommu_fwnode);
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 
-	if (!ops)
+	if (!iommu)
 		return driver_deferred_probe_check_state(dev);
+	if (!dev->iommu && !READ_ONCE(iommu->ready))
+		return -EPROBE_DEFER;
 
 	if (fwspec)
-		return ops == iommu_fwspec_ops(fwspec) ? 0 : -EINVAL;
+		return iommu->ops == iommu_fwspec_ops(fwspec) ? 0 : -EINVAL;
 
 	if (!dev_iommu_get(dev))
 		return -ENOMEM;
diff --git linux-libre-6.15-gnu/drivers/perf/arm-cmn.c linux-libre-6.15.1-gnu/drivers/perf/arm-cmn.c
index d4fe30ff225b..403850b1040d 100644
--- linux-libre-6.15-gnu/drivers/perf/arm-cmn.c
+++ linux-libre-6.15.1-gnu/drivers/perf/arm-cmn.c
@@ -727,8 +727,8 @@ static umode_t arm_cmn_event_attr_is_visible(struct kobject *kobj,
 
 		if ((chan == 5 && cmn->rsp_vc_num < 2) ||
 		    (chan == 6 && cmn->dat_vc_num < 2) ||
-		    (chan == 7 && cmn->snp_vc_num < 2) ||
-		    (chan == 8 && cmn->req_vc_num < 2))
+		    (chan == 7 && cmn->req_vc_num < 2) ||
+		    (chan == 8 && cmn->snp_vc_num < 2))
 			return 0;
 	}
 
@@ -882,8 +882,8 @@ static umode_t arm_cmn_event_attr_is_visible(struct kobject *kobj,
 	_CMN_EVENT_XP(pub_##_name, (_event) | (4 << 5)),	\
 	_CMN_EVENT_XP(rsp2_##_name, (_event) | (5 << 5)),	\
 	_CMN_EVENT_XP(dat2_##_name, (_event) | (6 << 5)),	\
-	_CMN_EVENT_XP(snp2_##_name, (_event) | (7 << 5)),	\
-	_CMN_EVENT_XP(req2_##_name, (_event) | (8 << 5))
+	_CMN_EVENT_XP(req2_##_name, (_event) | (7 << 5)),	\
+	_CMN_EVENT_XP(snp2_##_name, (_event) | (8 << 5))
 
 #define CMN_EVENT_XP_DAT(_name, _event)				\
 	_CMN_EVENT_XP_PORT(dat_##_name, (_event) | (3 << 5)),	\
@@ -2558,6 +2558,7 @@ static int arm_cmn_probe(struct platform_device *pdev)
 
 	cmn->dev = &pdev->dev;
 	cmn->part = (unsigned long)device_get_match_data(cmn->dev);
+	cmn->cpu = cpumask_local_spread(0, dev_to_node(cmn->dev));
 	platform_set_drvdata(pdev, cmn);
 
 	if (cmn->part == PART_CMN600 && has_acpi_companion(cmn->dev)) {
@@ -2585,7 +2586,6 @@ static int arm_cmn_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	cmn->cpu = cpumask_local_spread(0, dev_to_node(cmn->dev));
 	cmn->pmu = (struct pmu) {
 		.module = THIS_MODULE,
 		.parent = cmn->dev,
@@ -2651,6 +2651,7 @@ static const struct acpi_device_id arm_cmn_acpi_match[] = {
 	{ "ARMHC600", PART_CMN600 },
 	{ "ARMHC650" },
 	{ "ARMHC700" },
+	{ "ARMHC003" },
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, arm_cmn_acpi_match);
diff --git linux-libre-6.15-gnu/fs/coredump.c linux-libre-6.15.1-gnu/fs/coredump.c
index c33c177a701b..d740a0411266 100644
--- linux-libre-6.15-gnu/fs/coredump.c
+++ linux-libre-6.15.1-gnu/fs/coredump.c
@@ -43,6 +43,8 @@
 #include <linux/timekeeping.h>
 #include <linux/sysctl.h>
 #include <linux/elf.h>
+#include <linux/pidfs.h>
+#include <uapi/linux/pidfd.h>
 
 #include <linux/uaccess.h>
 #include <asm/mmu_context.h>
@@ -60,6 +62,12 @@ static void free_vma_snapshot(struct coredump_params *cprm);
 #define CORE_FILE_NOTE_SIZE_DEFAULT (4*1024*1024)
 /* Define a reasonable max cap */
 #define CORE_FILE_NOTE_SIZE_MAX (16*1024*1024)
+/*
+ * File descriptor number for the pidfd for the thread-group leader of
+ * the coredumping task installed into the usermode helper's file
+ * descriptor table.
+ */
+#define COREDUMP_PIDFD_NUMBER 3
 
 static int core_uses_pid;
 static unsigned int core_pipe_limit;
@@ -339,6 +347,27 @@ static int format_corename(struct core_name *cn, struct coredump_params *cprm,
 			case 'C':
 				err = cn_printf(cn, "%d", cprm->cpu);
 				break;
+			/* pidfd number */
+			case 'F': {
+				/*
+				 * Installing a pidfd only makes sense if
+				 * we actually spawn a usermode helper.
+				 */
+				if (!ispipe)
+					break;
+
+				/*
+				 * Note that we'll install a pidfd for the
+				 * thread-group leader. We know that task
+				 * linkage hasn't been removed yet and even if
+				 * this @current isn't the actual thread-group
+				 * leader we know that the thread-group leader
+				 * cannot be reaped until @current has exited.
+				 */
+				cprm->pid = task_tgid(current);
+				err = cn_printf(cn, "%d", COREDUMP_PIDFD_NUMBER);
+				break;
+			}
 			default:
 				break;
 			}
@@ -493,7 +522,7 @@ static void wait_for_dump_helpers(struct file *file)
 }
 
 /*
- * umh_pipe_setup
+ * umh_coredump_setup
  * helper function to customize the process used
  * to collect the core in userspace.  Specifically
  * it sets up a pipe and installs it as fd 0 (stdin)
@@ -503,11 +532,32 @@ static void wait_for_dump_helpers(struct file *file)
  * is a special value that we use to trap recursive
  * core dumps
  */
-static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
+static int umh_coredump_setup(struct subprocess_info *info, struct cred *new)
 {
 	struct file *files[2];
 	struct coredump_params *cp = (struct coredump_params *)info->data;
-	int err = create_pipe_files(files, 0);
+	int err;
+
+	if (cp->pid) {
+		struct file *pidfs_file __free(fput) = NULL;
+
+		pidfs_file = pidfs_alloc_file(cp->pid, 0);
+		if (IS_ERR(pidfs_file))
+			return PTR_ERR(pidfs_file);
+
+		/*
+		 * Usermode helpers are childen of either
+		 * system_unbound_wq or of kthreadd. So we know that
+		 * we're starting off with a clean file descriptor
+		 * table. So we should always be able to use
+		 * COREDUMP_PIDFD_NUMBER as our file descriptor value.
+		 */
+		err = replace_fd(COREDUMP_PIDFD_NUMBER, pidfs_file, 0);
+		if (err < 0)
+			return err;
+	}
+
+	err = create_pipe_files(files, 0);
 	if (err)
 		return err;
 
@@ -515,10 +565,13 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
 
 	err = replace_fd(0, files[0], 0);
 	fput(files[0]);
+	if (err < 0)
+		return err;
+
 	/* and disallow core files too */
 	current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1};
 
-	return err;
+	return 0;
 }
 
 void do_coredump(const kernel_siginfo_t *siginfo)
@@ -593,7 +646,7 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		}
 
 		if (cprm.limit == 1) {
-			/* See umh_pipe_setup() which sets RLIMIT_CORE = 1.
+			/* See umh_coredump_setup() which sets RLIMIT_CORE = 1.
 			 *
 			 * Normally core limits are irrelevant to pipes, since
 			 * we're not writing to the file system, but we use
@@ -632,7 +685,7 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		retval = -ENOMEM;
 		sub_info = call_usermodehelper_setup(helper_argv[0],
 						helper_argv, NULL, GFP_KERNEL,
-						umh_pipe_setup, NULL, &cprm);
+						umh_coredump_setup, NULL, &cprm);
 		if (sub_info)
 			retval = call_usermodehelper_exec(sub_info,
 							  UMH_WAIT_EXEC);
diff --git linux-libre-6.15-gnu/fs/pidfs.c linux-libre-6.15.1-gnu/fs/pidfs.c
index d64a4cbeb0da..50e69a9e104a 100644
--- linux-libre-6.15-gnu/fs/pidfs.c
+++ linux-libre-6.15.1-gnu/fs/pidfs.c
@@ -888,6 +888,7 @@ struct file *pidfs_alloc_file(struct pid *pid, unsigned int flags)
 		return ERR_PTR(-ESRCH);
 
 	flags &= ~PIDFD_CLONE;
+	flags |= O_RDWR;
 	pidfd_file = dentry_open(&path, flags, current_cred());
 	/* Raise PIDFD_THREAD explicitly as do_dentry_open() strips it. */
 	if (!IS_ERR(pidfd_file))
diff --git linux-libre-6.15-gnu/include/linux/coredump.h linux-libre-6.15.1-gnu/include/linux/coredump.h
index 77e6e195d1d6..76e41805b92d 100644
--- linux-libre-6.15-gnu/include/linux/coredump.h
+++ linux-libre-6.15.1-gnu/include/linux/coredump.h
@@ -28,6 +28,7 @@ struct coredump_params {
 	int vma_count;
 	size_t vma_data_size;
 	struct core_vma_metadata *vma_meta;
+	struct pid *pid;
 };
 
 extern unsigned int core_file_note_size_limit;
diff --git linux-libre-6.15-gnu/include/linux/iommu.h linux-libre-6.15.1-gnu/include/linux/iommu.h
index 3a8d35d41fda..4273871845ee 100644
--- linux-libre-6.15-gnu/include/linux/iommu.h
+++ linux-libre-6.15.1-gnu/include/linux/iommu.h
@@ -750,6 +750,7 @@ struct iommu_domain_ops {
  * @dev: struct device for sysfs handling
  * @singleton_group: Used internally for drivers that have only one group
  * @max_pasids: number of supported PASIDs
+ * @ready: set once iommu_device_register() has completed successfully
  */
 struct iommu_device {
 	struct list_head list;
@@ -758,6 +759,7 @@ struct iommu_device {
 	struct device *dev;
 	struct iommu_group *singleton_group;
 	u32 max_pasids;
+	bool ready;
 };
 
 /**
diff --git linux-libre-6.15-gnu/net/sched/sch_hfsc.c linux-libre-6.15.1-gnu/net/sched/sch_hfsc.c
index 7986145a527c..5a7745170e84 100644
--- linux-libre-6.15-gnu/net/sched/sch_hfsc.c
+++ linux-libre-6.15.1-gnu/net/sched/sch_hfsc.c
@@ -175,6 +175,11 @@ struct hfsc_sched {
 
 #define	HT_INFINITY	0xffffffffffffffffULL	/* infinite time value */
 
+static bool cl_in_el_or_vttree(struct hfsc_class *cl)
+{
+	return ((cl->cl_flags & HFSC_FSC) && cl->cl_nactive) ||
+		((cl->cl_flags & HFSC_RSC) && !RB_EMPTY_NODE(&cl->el_node));
+}
 
 /*
  * eligible tree holds backlogged classes being sorted by their eligible times.
@@ -1040,6 +1045,8 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 	if (cl == NULL)
 		return -ENOBUFS;
 
+	RB_CLEAR_NODE(&cl->el_node);
+
 	err = tcf_block_get(&cl->block, &cl->filter_list, sch, extack);
 	if (err) {
 		kfree(cl);
@@ -1572,7 +1579,7 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff **to_free)
 	sch->qstats.backlog += len;
 	sch->q.qlen++;
 
-	if (first && !cl->cl_nactive) {
+	if (first && !cl_in_el_or_vttree(cl)) {
 		if (cl->cl_flags & HFSC_RSC)
 			init_ed(cl, len);
 		if (cl->cl_flags & HFSC_FSC)
