diff --git linux-libre-6.6.131-gnu/Makefile linux-libre-6.6.132-gnu/Makefile
index 069f004aecb4..37a98f1d4a3a 100644
--- linux-libre-6.6.131-gnu/Makefile
+++ linux-libre-6.6.132-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 6
-SUBLEVEL = 131
+SUBLEVEL = 132
 EXTRAVERSION = -gnu
 NAME = Pinguïn Aangedreven
 
diff --git linux-libre-6.6.131-gnu/rust/kernel/init/macros.rs linux-libre-6.6.132-gnu/rust/kernel/init/macros.rs
index d6f8d5ce61af..cb769a09e742 100644
--- linux-libre-6.6.131-gnu/rust/kernel/init/macros.rs
+++ linux-libre-6.6.132-gnu/rust/kernel/init/macros.rs
@@ -964,54 +964,35 @@ macro_rules! __pin_data {
         @pinned($($(#[$($p_attr:tt)*])* $pvis:vis $p_field:ident : $p_type:ty),* $(,)?),
         @not_pinned($($(#[$($attr:tt)*])* $fvis:vis $field:ident : $type:ty),* $(,)?),
     ) => {
-        $crate::macros::paste! {
-            // For every field, we create a projection function according to its projection type. If a
-            // field is structurally pinned, then it must be initialized via `PinInit`, if it is not
-            // structurally pinned, then it can be initialized via `Init`.
-            //
-            // The functions are `unsafe` to prevent accidentally calling them.
-            #[allow(dead_code, non_snake_case)]
-            #[expect(clippy::missing_safety_doc)]
-            impl<$($impl_generics)*> $pin_data<$($ty_generics)*>
-            where $($whr)*
-            {
-                $(
-                    $(#[$($p_attr)*])*
-                    $pvis unsafe fn $p_field<E>(
-                        self,
-                        slot: *mut $p_type,
-                        init: impl $crate::init::PinInit<$p_type, E>,
-                    ) -> ::core::result::Result<(), E> {
-                        unsafe { $crate::init::PinInit::__pinned_init(init, slot) }
-                    }
-
-                    $(#[$($p_attr)*])*
-                    $pvis unsafe fn [<__project_ $p_field>]<'__slot>(
-                        self,
-                        slot: &'__slot mut $p_type,
-                    ) -> ::core::pin::Pin<&'__slot mut $p_type> {
-                        unsafe { ::core::pin::Pin::new_unchecked(slot) }
-                    }
-                )*
-                $(
-                    $(#[$($attr)*])*
-                    $fvis unsafe fn $field<E>(
-                        self,
-                        slot: *mut $type,
-                        init: impl $crate::init::Init<$type, E>,
-                    ) -> ::core::result::Result<(), E> {
-                        unsafe { $crate::init::Init::__init(init, slot) }
-                    }
-
-                    $(#[$($attr)*])*
-                    $fvis unsafe fn [<__project_ $field>]<'__slot>(
-                        self,
-                        slot: &'__slot mut $type,
-                    ) -> &'__slot mut $type {
-                        slot
-                    }
-                )*
-            }
+        // For every field, we create a projection function according to its projection type. If a
+        // field is structurally pinned, then it must be initialized via `PinInit`, if it is not
+        // structurally pinned, then it can be initialized via `Init`.
+        //
+        // The functions are `unsafe` to prevent accidentally calling them.
+        #[allow(dead_code)]
+        impl<$($impl_generics)*> $pin_data<$($ty_generics)*>
+        where $($whr)*
+        {
+            $(
+                $(#[$($p_attr)*])*
+                $pvis unsafe fn $p_field<E>(
+                    self,
+                    slot: *mut $p_type,
+                    init: impl $crate::init::PinInit<$p_type, E>,
+                ) -> ::core::result::Result<(), E> {
+                    unsafe { $crate::init::PinInit::__pinned_init(init, slot) }
+                }
+            )*
+            $(
+                $(#[$($attr)*])*
+                $fvis unsafe fn $field<E>(
+                    self,
+                    slot: *mut $type,
+                    init: impl $crate::init::Init<$type, E>,
+                ) -> ::core::result::Result<(), E> {
+                    unsafe { $crate::init::Init::__init(init, slot) }
+                }
+            )*
         }
     };
 }
@@ -1205,17 +1186,6 @@ macro_rules! __init_internal {
         // return when an error/panic occurs.
         // We also use the `data` to require the correct trait (`Init` or `PinInit`) for `$field`.
         unsafe { $data.$field(::core::ptr::addr_of_mut!((*$slot).$field), init)? };
-        // NOTE: the field accessor ensures that the initialized field is properly aligned.
-        // Unaligned fields will cause the compiler to emit E0793. We do not support
-        // unaligned fields since `Init::__init` requires an aligned pointer; the call to
-        // `ptr::write` below has the same requirement.
-        // SAFETY:
-        // - the project function does the correct field projection,
-        // - the field has been initialized,
-        // - the reference is only valid until the end of the initializer.
-        #[allow(unused_variables, unused_assignments)]
-        let $field = $crate::macros::paste!(unsafe { $data.[< __project_ $field >](&mut (*$slot).$field) });
-
         // Create the drop guard:
         //
         // We rely on macro hygiene to make it impossible for users to access this local variable.
@@ -1247,18 +1217,6 @@ macro_rules! __init_internal {
         // SAFETY: `slot` is valid, because we are inside of an initializer closure, we
         // return when an error/panic occurs.
         unsafe { $crate::init::Init::__init(init, ::core::ptr::addr_of_mut!((*$slot).$field))? };
-
-        // NOTE: the field accessor ensures that the initialized field is properly aligned.
-        // Unaligned fields will cause the compiler to emit E0793. We do not support
-        // unaligned fields since `Init::__init` requires an aligned pointer; the call to
-        // `ptr::write` below has the same requirement.
-        // SAFETY:
-        // - the field is not structurally pinned, since the line above must compile,
-        // - the field has been initialized,
-        // - the reference is only valid until the end of the initializer.
-        #[allow(unused_variables, unused_assignments)]
-        let $field = unsafe { &mut (*$slot).$field };
-
         // Create the drop guard:
         //
         // We rely on macro hygiene to make it impossible for users to access this local variable.
@@ -1277,7 +1235,7 @@ macro_rules! __init_internal {
             );
         }
     };
-    (init_slot(): // No `use_data`, so all fields are not structurally pinned
+    (init_slot($($use_data:ident)?):
         @data($data:ident),
         @slot($slot:ident),
         @guards($($guards:ident,)*),
@@ -1291,19 +1249,6 @@ macro_rules! __init_internal {
             // SAFETY: The memory at `slot` is uninitialized.
             unsafe { ::core::ptr::write(::core::ptr::addr_of_mut!((*$slot).$field), $field) };
         }
-
-        // NOTE: the field accessor ensures that the initialized field is properly aligned.
-        // Unaligned fields will cause the compiler to emit E0793. We do not support
-        // unaligned fields since `Init::__init` requires an aligned pointer; the call to
-        // `ptr::write` below has the same requirement.
-        #[allow(unused_variables, unused_assignments)]
-        // SAFETY:
-        // - the field is not structurally pinned, since no `use_data` was required to create this
-        //   initializer,
-        // - the field has been initialized,
-        // - the reference is only valid until the end of the initializer.
-        let $field = unsafe { &mut (*$slot).$field };
-
         // Create the drop guard:
         //
         // We rely on macro hygiene to make it impossible for users to access this local variable.
@@ -1314,50 +1259,7 @@ macro_rules! __init_internal {
                 $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field))
             };
 
-            $crate::__init_internal!(init_slot():
-                @data($data),
-                @slot($slot),
-                @guards([< __ $field _guard >], $($guards,)*),
-                @munch_fields($($rest)*),
-            );
-        }
-    };
-    (init_slot($use_data:ident):
-        @data($data:ident),
-        @slot($slot:ident),
-        @guards($($guards:ident,)*),
-        // Init by-value.
-        @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*),
-    ) => {
-        {
-            $(let $field = $val;)?
-            // Initialize the field.
-            //
-            // SAFETY: The memory at `slot` is uninitialized.
-            unsafe { ::core::ptr::write(::core::ptr::addr_of_mut!((*$slot).$field), $field) };
-        }
-        // NOTE: the field accessor ensures that the initialized field is properly aligned.
-        // Unaligned fields will cause the compiler to emit E0793. We do not support
-        // unaligned fields since `Init::__init` requires an aligned pointer; the call to
-        // `ptr::write` below has the same requirement.
-        // SAFETY:
-        // - the project function does the correct field projection,
-        // - the field has been initialized,
-        // - the reference is only valid until the end of the initializer.
-        #[allow(unused_variables, unused_assignments)]
-        let $field = $crate::macros::paste!(unsafe { $data.[< __project_ $field >](&mut (*$slot).$field) });
-
-        // Create the drop guard:
-        //
-        // We rely on macro hygiene to make it impossible for users to access this local variable.
-        // We use `paste!` to create new hygiene for `$field`.
-        $crate::macros::paste! {
-            // SAFETY: We forget the guard later when initialization has succeeded.
-            let [< __ $field _guard >] = unsafe {
-                $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field))
-            };
-
-            $crate::__init_internal!(init_slot($use_data):
+            $crate::__init_internal!(init_slot($($use_data)?):
                 @data($data),
                 @slot($slot),
                 @guards([<$field>], $($guards,)*),
